NGB
PLASTIC BELTS
TYPE 12
12-400
Belt surface:
Open belt with a smooth surface.
Open area:
40% Biggest opening 6x8 mm.
Strength:
Ideal choice for light transportation.
Material/colour:
PE/nat, PP/white and grey. POM/blue/nut.
Cleanability: Application:
Excellen FSIS Cooling belt for small nose bar/transfer
Width interval:
10mm. e.g.:100 mm, 110 mm,
Max. belt pull kg/m of width
Materials Polyethylene (PE)
Belt weight kg/m2
600
3.5
Polypropylene (PP)
800
3.5
Polyacetal (POM)
1450
4.8
No. of teeth Z
A=Outside diameter (mm)
B=Pitch diameter (mm)
C=Inside diameter (mm)
10
50
42
33
19
84
76
67
24
104
96
87
28
120
112
103
HUB SPECIFICATION
SPROCKET DATA
BELT DATA
120 mm etc.
Hub width 16 mm Round bore (mm)
Number of teeth
10Z
19Z
10 20
20 25 30 40 25x25 40x40
Square bore (mm)
A
B
C
12.5
16
Number of teeth
24Z 20 25 30 40 25x25 40x40
28Z 20 25 30 40 25x25 40x40
NGB
PLASTIC BELTS
12-406
TYPE 12
Belt surface:
Open belt with a smooth surface.
Open area:
8%. Biggest opening 4x2.5 mm
Strength:
Ideal choice for light transportation.
Material/colour:
PE/nat, PP/white and grey. POM/blue/nut.
Cleanability:
Excellen FSIS
Application:
Cooling belt for small nose bar/transfer
Width interval:
10mm. e.g.:100 mm, 110 mm,
600
4.5
800
4.5
1450
6
Polyethylene (PE) Polypropylene (PP) Polyacetal (POM)
No. of teeth Z
A=Outside diameter (mm)
B=Pitch diameter (mm)
C=Inside diameter (mm)
10
50
42
33
19
84
76
67
24
104
96
87
28
120
112
103
Number of teeth
Hub width 16 mm
10Z
Round bore (mm)
10 20
19Z 20 25 30 40 25x25 40x40
Square bore (mm)
24Z 20 25 30 40 25x25 40x40
28Z 20 25 30 40 25x25 40x40
12.5
A
Belt weight kg/m2
B
Max. belt pull kg/m of width
C
Materials
HUB SPECIFICATION
SPROCKET DATA
BELT DATA
120 mm etc.
17
NGB
PLASTIC BELTS
TYPE 12
12-408
Belt surface:
Close belt with a smooth surface.
Open area:
0%
Strength:
Ideal choice for light transportation.
Material/colour:
PE/nat, PP/white and grey. POM/blue/nut.
Cleanability: Application:
Excellen FSIS Cooling belt for small nose bar/transfer
Width interval:
10mm. e.g.:100 mm, 110 mm,
Materials
Max. belt pull kg/m of width
Belt weight kg/m2
600
4.5
800
4.5
1450
6
Polyethylene (PE) Polypropylene (PP) Polyacetal (POM)
No. of teeth Z
A=Outside diameter (mm)
B=Pitch diameter (mm)
C=Inside diameter (mm)
10
50
42
33
19
84
76
67
24
104
96
87
28
120
112
103
HUB SPECIFICATION
SPROCKET DATA
BELT DATA
120 mm etc.
Number of teeth
Hub width 16 mm
10Z
Round bore (mm)
10 20
19Z 20 25 30 40 25x25 40x40
Square bore (mm)
18
A
B
C
12.5
24Z 20 25 30 40 25x25 40x40
28Z 20 25 30 40 25x25 40x40
NGB
PLASTIC BELTS
25-400
TYPE 25
Belt surface:
Open belt with a smooth surface.
Open area:
29%. Biggest opening 6 x 10 mm.
Strength:
Ideal for medium weight transportation.
Material/colour: PE/nat, PP/white and grey. POM/blue. Cleanability:
Excellent. FSIS
Accessories:
3, 25 and 50 mm flights. 25 and 50 mm sideguards. The 3, 25 and 50 mm flights and standard modules can be supplied in a special high-friction material.
Application:
Seafood, red meat, vegetables, bakery and foodindustry in general. Even cooling/freezing and washing.
Belt weight kg/m2
Polyethylene (PE)
630
5
Polypropylene (PP)
1060
5
Polyacetal (POM)
1500
7
A=Outside diameter (mm)
B=Pitch diameter (mm)
C=Insede diameter (mm)
6 8 12 20
54 70 104 169
45 61 95 160
36 52 86 151
12,5 mm. e.g. 100 mm, 112,5 mm, 125 mm etc.
Hub width 16 mm Round bore (mm)
Number of teeth 6Z
8Z
12Z
20Z
20ø
20ø 25ø
20ø 25ø 30ø 40ø
25ø 30ø 40ø
25x25
25x25 40x40
Hexagon 24x24x24 bore (mm) Square bore (mm)
25x25 40x40 60x60
C
B
9
No. of teeth Z
HUB SPECIFICATION
Max. belt pull kg/m of width
Materials
A
SPROCKET DATA
BELT DATA
Width interval:
25
19
NGB
PLASTIC BELTS
TYPE 25
25-406
Belt surface:
Perforated flat top.
Open area:
13%. Biggest opening 1 x 6 mm.
Strength:
Ideal for medium weight transportation.
Material/colour: PE/nat, PP/white and grey. Cleanability:
Good.
Accessories:
5, 25 and 50 mm flights. 25 and 50 mm side guards. 25 and 50 mm friction flights.
Application:
Dairy, vegetables, poultry, snacks, sweet goods and other industries that handle products requiring drainage and very small
openings.
Max. belt pull kg/m of width
Belt weight kg/m2
Polyethylene (PE)
900
6
Polypropylene (PP)
1250
6
Polyacetal (POM)
2400
8
Materials
A=Outside diameter (mm)
B=Pitch diameter (mm)
C=Inside diameter (mm)
6 8 12 20
54 70 104 169
45 61 95 160
36 52 86 151
Number of teeth
Hub width 16 mm Round bore (mm)
6Z
8Z
20ø
20ø 25ø
Square bore (mm)
25x25
C
B
A
25
20
12Z
20Z
25ø 30ø 40ø
25ø 30ø 40ø
Hexagon 24x24x24 bore (mm)
9
No. of teeth Z
HUB SPECIFICATION
SPROCKET DATA
BELT DATA
Width interval: 5 mm. e.g. 100 mm, 105 mm, 110 mm etc.
25x25 40x40
25x25 40x40 60x60
NGB
PLASTIC BELTS
25-408
TYPE 25
Belt surface:
Flat top.
Open area:
Closed.
Strength:
Strongest belt in the 25 series. Ideal for medium weight transportation.
Material/colour: PE/nat, PP/white and grey. POM/blue. Cleanability:
Good
Accessories:
25 and 50 mm flights. 25 and 50 mm side guards.
Application:
Transport of small products.
Belt weight kg/m2
Polyethylene (PE)
900
6
Polypropylene (PP)
1250
6
Polyacetal (POM)
2400
8.5
A=Outside diameter (mm)
B=Pitch diameter (mm)
C=Inside diameter (mm)
6 8 12 20
54 70 104 169
45 61 95 160
36 52 86 151
Hub width 16 mm Round bore (mm)
Number of teeth 6Z
8Z
12Z
20Z
20ø
20ø 25ø
20ø 25ø 30ø 40ø
25ø 30ø 40ø
25x25
25x25 40x40
Hexagon 24x24x24 bore (mm) Square bore (mm)
25x25 40x40 60x60
C
B
9
No. of teeth Z
HUB SPECIFICATION
Max. belt pull kg/m of width
Materials
A
SPROCKET DATA
BELT DATA
Width interval: 15 mm. e.g. 100 mm, 105 mm, 110 mm etc.
25
21
NGB
PLASTIC BELTS
TYPE 25
Belt surface:
25-420
Raised ribs - drained - for the use of finger transferplates.
Open area:
14%. Biggest opening 10 x 2 mm.
Strength:
Ideal for medium weight transportation.
Material/colour: POM/blue/PP white. Cleanability:
Excellent.
Accessories:
Finger transfer plates.
Application:
Transportation of small products, such as bottles, pasterizer, cooler.
Max. belt pull kg/m of width
Belt weight kg/m2
Polyethylene (PE)
900
8
Polypropylene (PP)
1200
8
Polyacetal (POM)
2400
11
Materials
No. of teeth Z
A=Outside diameter (mm)
B=Pitch diameter (mm)
C=Inside diameter (mm)
6 8 12 20
64 80 114 179
45 61 95 160
36 52 86 151
10 mm. e.g. 100 mm, 110 mm, 120 mm etc.
Hub width 16 mm
HUB SPECIFICATION
SPROCKET DATA
BELT DATA
Width interval:
Round bore (mm)
Number of teeth 6Z
8Z
20ø
20ø 25ø
Square bore (mm)
25x25
14
C
B
A
20Z
25ø 30ø 40ø
25ø 30ø 40ø
Hexagon 24x24x24 bore (mm)
25
22
12Z
25x25 40x40
25x25 40x40 60x60
NGB
PLASTIC BELTS
25-800
TYPE 25
Belt surface:
Flat top.
Open area:
Closed.
Strength:
An ideal choice for light transportation.
Material/colour: PE/nat, PP/white and grey. POM/blue. Cleanability:
Excellent. FSIS
Accessories:
3, 25 and 50 mm flights. 25 and 50 mm side guards.
Application:
Red meat, vegetables, seafood, fruit, snacksand bakeries.
Width interval: 10 mm. e.g. 100 mm, 110 mm, 120 mm etc.
5
Polypropylene (PP)
650
5
Polyacetal (POM)
1050
7.5
No. of teeth Z
A=Outside diameter (mm)
B=Pitch diameter (mm)
C=Inside diameter (mm)
6 12 20
59 106 170
50 97 161
41 88 152
Hub width 16 mm Round bore (mm)
Square bore (mm)
Number of teeth 6Z
12Z
20Z
20ø
25ø 30ø 40ø
25ø 30ø 40ø
40x40 40x40
60x60
25
A
550
B
Polyethylene (PE)
HUB SPECIFICATION
Belt weight kg/m2
C
Max. belt pull kg/m of width
Materials
9
SPROCKET DATA
BELT DATA
EASY TO CLEAN
23
NGB
PLASTIC BELTS
TYPE 25
25-806
Belt surface:
Perforated flat top.
Open area:
17%. Biggest opening 2 x 5 mm.
Strength:
An ideal choice for light transportation.
Material/colour: PE/nat, PP/white and grey. POM/blue. Cleanability:
Excellent. FSIS
Accessories:
3, 25 and 50 mm flights. 25 and 50 mm side guards.
Application:
Seafood, dairy, vegetables, poultry, snacks, sweet goods...
Width interval: 10 mm. e.g. 100 mm, 110 mm, 120 mm etc.
Max. belt pull kg/m of width
Belt weight kg/m2
550
5.5
Polypropylene (PP)
650
5.5
Polyacetal (POM)
1050
8
Materials Polyethylene (PE)
No. of teeth Z
A=Outside diameter (mm)
B=Pitch diameter (mm)
C=Inside diameter (mm)
6 12 20
59 106 170
50 97 161
41 88 152
HUB SPECIFICATION
SPROCKET DATA
BELT DATA
EASY TO CLEAN
Hub width 16 mm Round bore (mm)
Square bore (mm)
9
24
A
B
C
25
Number of teeth 6Z
12Z
20Z
20ø
25ø 30ø 40ø
25ø 30ø 40ø
40x40 40x40
60x60
NGB
PLASTIC BELTS
50-100
TYPE 50
Belt surface:
Open belt with a smooth
surface.
Open area:
27%. Biggest opening 5 x 9 mm.
Strength:
The right belt for heavy applications.
Material/colour: PE/nat, PP/white and grey. POM/blue. Cleanability:
Good.
Accessories:
25, 50, 75 and 100 mm flights. Extended and bent flights. 50, 75, 100 and 150 mm sideguards. 50 mm comb flights. High frictionmodules. Hold-down. Flights fitted with a round top.
Application:
Seafood, wood, bakery, meat, vegetables, poultryand heavy duty transportation in general.
8
Polypropylene (PP)
2795
8
Polyacetal (POM)
4200
12
No. of teeth Z
A=Outside diameter (mm)
B=Pitch diameter (mm)
C=Inside diameter (mm)
6 8 10 12 16
117 149 180 211 275
101 133 164 195 259
85 117 148 179 243
Number of teeth
Hub width 40 mm
6Z 25ø 30ø 40ø
Round bore (mm)
Square bore (mm)
38x38 40x40
8Z 25ø 30ø 40ø
10Z
12Z
16Z
30ø 40ø 50ø 60ø 80ø
30ø 40ø 50ø 60ø 80ø
60ø 80ø
30x30 38x38 38x38 40x40 40x40 60x60
40x40 50x50 60x60
40x40 50x50 60x60 65x65 80x80
50
A
1840
B
Polyethylene (PE)
C
Belt weight kg/m2
16
Max. belt pull kg/m of width
Materials
HUB SPECIFICATION
SPROCKET DATA
BELT DATA
Width interval: 10 mm. e.g. 100 mm, 105 mm, 110 mm etc.
25
NGB
PLASTIC BELTS
TYPE 50
50-300
Belt surface:
Open belt with ribs across (height = 4 mm).
Open area:
27%. Biggest opening 5 x 9 mm.
Strength:
The right belt for heavy transportation.
Material/colour: PE/nat, PP/white and grey. POM/blue. Cleanability:
Good.
Accessories:
25, 50 and 100 mm flights.50, 75 and 150 high side guards. 50 mm comb flights. Hold-down. Extended and bent flights. Flights fitted with a roundtop. High-friction modules.
Application:
Seafood, bakery, meat, vegetables, poultry and heavy duty transportation in general.
Max. belt pull kg/m of width
Belt weight kg/m2
Polyethylene (PE)
1740
7
Polypropylene (PP)
2300
7
Polyacetal (POM)
3450
10
Materials
No. of teeth Z
A=Outside diameter (mm)
B=Pitch diameter (mm)
C=Inside diameter (mm)
6 8 10 12 16
117 149 180 211 275
101 133 164 195 259
85 117 148 179 243
Hub width 40 mm Round bore (mm)
HUB SPECIFICATION
SPROCKET DATA
BELT DATA
Width interval: 5 mm. e.g. 100 mm, 105 mm, 110 mm etc.
Square bore (mm)
Number of teeth 6Z 25ø 30ø 40ø
38x38 40x40
8Z 25ø 30ø 40ø
A
B
C 16
12Z
16Z
30ø 40ø 50ø 60ø 80ø
30ø 40ø 50ø 60ø 80ø
60ø 80ø
30x30 38x38 38x38 40x40 40x40 60x60
50
26
10Z
40x40 50x50 60x60
40x40 50x50 60x60 65x65 80x80
NGB
PLASTIC BELTS
50-400
TYPE 50
Belt surface:
Open belt with a smooth surface.
Open area:
50%. Biggest opening 5 x 11 mm.
Strength:
The right belt for medium-heavy transportation.
Material/colour: PE/nat, PP/white and grey. POM/blue. Cleanability:
Excellent. FSIS
Accessories:
25, 50 and 75 mm flights. 50, 75, 100 and 150 mm side guards. Hold-down. Extended and bent flights. Flights fitted with a round top.
Application:
Cooling/freezing belts in the seafood, bakery, vege-table and meat industries and other areas where large air-flow combined with a small open area is requried.
6
Polypropylene (PP)
2160
6
Polyacetal (POM)
3240
8
No. of teeth Z
A=Outside diameter (mm)
B=Pitch diameter (mm)
C=Inside diameter (mm)
6 8 10 12 16
117 149 180 211 275
101 133 164 195 259
85 117 148 179 243
Number of teeth
Hub width 40 mm
6Z 25ø 30ø 40ø
Round bore (mm)
Square bore (mm)
38x38 40x40
8Z 25ø 30ø 40ø
10Z
12Z
16Z
30ø 40ø 50ø 60ø 80ø
30ø 40ø 50ø 60ø 80ø
60ø 80ø
30x30 38x38 38x38 40x40 40x40 60x60
40x40 50x50 60x60
40x40 50x50 60x60 65x65 80x80
50
A
1640
B
Polyethylene (PE)
C
Belt weight kg/m2
16
Max. belt pull kg/m of width
Materials
HUB SPECIFICATION
SPROCKET DATA
BELT DATA
Width interval: 7 mm. e.g. 100 mm, 107 mm, 114 mm etc.
27
NGB
PLASTIC BELTS
TYPE 50
50-600
Belt surface:
Perforated flat top.
Open area:
9%. Biggest opening 1 x 6 mm
Strength:
The right belt for medium-heavy transportation.
Material/colour: PE/nat, PP/white and grey. POM/blue. Cleanability:
Excellent. FSIS
Accessories:
25, 50 and 75 mm flights. 50, 75, 100 and 150 mm side guards. Flights fitted with a round top.
Application:
Dairy, vegetables, poultry, snacks, sweet goods and other industries that handle products requiring drainage and very small openings.
Max. belt pull kg/m of width
Belt weight kg/m2
Polyethylene (PE)
1790
7
Polypropylene (PP)
2400
7
Polyacetal (POM)
3600
11
Materials
No. of teeth Z
A=Outside diameter (mm)
B=Pitch diameter (mm)
C=Inside diameter (mm)
6 8 10 12 16
115 147 178 209 275
101 133 164 195 259
85 117 148 179 243
Hub width 40 mm Round bore (mm)
HUB SPECIFICATION
SPROCKET DATA
BELT DATA
Width interval: 5 mm. e.g. 100 mm, 105 mm, 110 mm etc.
Square bore (mm)
Number of teeth 6Z 25ø 30ø 40ø
38x38 40x40
8Z 25ø 30ø 40ø
A
B
C 15
12Z
16Z
30ø 40ø 50ø 60ø 80ø
30ø 40ø 50ø 60ø 80ø
60ø 80ø
38x38 40x40 60x60 65x65 80x80
40x40 50x50 60x60 65x65 80x80
30x30 38x38 38x38 40x40 40x40 60x60
50
28
10Z
NGB
PLASTIC BELTS
50-606
TYPE 50
Belt surface:
Perforated flat top.
Open area:
10%. Biggest opening 3 x 6 mm
Strength:
The right belt for medium-heavy transportation.
Material/colour: PE/nat, PP/white and grey. POM/blue. Cleanability:
Excellent. FSIS
Accessories:
25, 50 and 75 mm flights. Hold-down.50, 75, 100 and 150 mm side guards. 50 mm comb flights, friction modules and bent flights.Flights fitted with a round top.
Application:
Dairy, vegetables, poultry, snacks, sweet goods and other industries that handle productsrequiring drainage and small openings.
7
Polypropylene (PP)
2400
7
Polyacetal (POM)
3600
11
No. of teeth Z
A=Outside diameter (mm)
B=Pitch diameter (mm)
C=Inside diameter (mm)
6 8 10 12 16
117 149 180 211 275
101 133 164 195 259
85 117 148 179 243
Hub width 40 mm Round bore (mm)
Square bore (mm)
Number of teeth 8Z 25ø 30ø 40ø
6Z 25ø 30ø 40ø
38x38 40x40
10Z
12Z
16Z
30ø 40ø 50ø 60ø 80ø
30ø 40ø 50ø 60ø 80ø
60ø 80ø
38x38 40x40 60x60 65x65 80x80
40x40 50x50 60x60 65x65 80x80
30x30 38x38 38x38 40x40 40x40 60x60
50
A
1790
B
Polyethylene (PE)
C
Belt weight kg/m2
5 mm. e.g. 100 mm, 105 mm, 110 mm etc.
15
Max. belt pull kg/m of width
Materials
HUB SPECIFICATION
SPROCKET DATA
BELT DATA
Width interval:
29
NGB
PLASTIC BELTS
TYPE 50
50-608
Belt surface:
Flat top.
Open area:
Closed.
Strength:
The right belt for medium-heavy transportation.
Material/colour: PE/nat, PP/white and grey. POM/blue. Cleanability:
Excellent. FSIS
Accessories:
25, 50, 75 and 100 mm high flights. Friction modules and hold-down. 50, 75, 100 and 150 mm side guards. Extended and bent flights.
Application:
Dairy, vegetables, poultry, snack food, sweet goods and other industries that handle small products.
Max. belt pull kg/m of width
Belt weight kg/m2
Polyethylene (PE)
1790
7
Polypropylene (PP)
2400
7
Polyacetal (POM)
3600
11
Materials
No. of teeth Z
A=Outside diameter (mm)
B=Pitch diameter (mm)
C=Inside diameter (mm)
6 8 10 12 16
117 149 180 211 275
101 133 164 195 259
85 117 148 179 243
Hub width 40 mm Round bore (mm)
HUB SPECIFICATION
SPROCKET DATA
BELT DATA
Width interval: 5 mm. e.g. 100 mm, 105 mm, 110 mm etc.
Square bore (mm)
Number of teeth 8Z 25ø 30ø 40ø
6Z 25ø 30ø 40ø
38x38 40x40
A
B
C 15
12Z
16Z
30ø 40ø 50ø 60ø 80ø
30ø 40ø 50ø 60ø 80ø
60ø 80ø
38x38 40x40 60x60 65x65 80x80
40x40 50x50 60x60 65x65 80x80
30x30 38x38 38x38 40x40 40x40 60x60
50
30
10Z
NGB
PLASTIC BELTS
50-800
TYPE 50
Belt surface:
Flat top.
Open area:
Closed.
Strength:
The right belt for medium-heavy transportation.
Material/colour: PE/nat, PP/white and grey. POM/blue. Cleanability:
Excellent. FSIS
Accessories:
25, 50 and 75 mm flights. 50, 75, 100 and 150 mm side guards. Hold-down. Extended and bent flights. Flights fittedwith a round top.
Application:
Red meat, seafood, poultry, dairy and vegetable industries and trimming lines in general.
Width interval: 20 mm. e.g. 100 mm, 120 mm, 140 mm etc.
8
1400
8
Polyacetal (POM)
2100
12
No. of teeth Z
A=Outside diameter (mm)
B=Pitch diameter (mm)
C=Inside diameter (mm)
6 8 10 12
115 147 178 209
101 133 164 195
85 117 148 179
Hub width 40 mm Round bore (mm)
16Z is only available without guides.
Square bore (mm)
Number of teeth 6Z 25ø 30ø 40ø
38x38 40x40
8Z 25ø 30ø 40ø
10Z
12Z
30ø 40ø 50ø 60ø 80ø
30ø 40ø 50ø 60ø 80ø
30x30 38x38 38x38 40x40 40x40 60x60
38x38 40x40 60x60 65x65 80x80
50
A
1200
Polypropylene (PP)
B
Polyethylene (PE)
C
Belt weight kg/m2
HUB SPECIFICATION
Max. belt pull kg/m of width
Materials
16
SPROCKET DATA
BELT DATA
EASY TO CLEAN
31
NGB
PLASTIC BELTS
TYPE 50
50-806
Belt surface:
Open belt with a smooth surface.
Open area:
20%. Biggest opening 2.5*11 mm.
Strength:
The right belt for medium-heavy transportation.
Material/colour: PE/nat, PP/white and grey. POM/blue. Cleanability:
Excellent. FSIS
Accessories:
3, 25, 50, 75 and 100 mm flights. 70 and 150 mm supported flights. Extended and bend flights. 50, 75, 100 and 150 mm side guards. Hold-down. Flights fitted with a 15 mm round top. Medium-heavy duty transportation, Dairy,
Application:
Vegetables, poultry, snacks, sweet goods and other industries that handle products requiring drainage and small opening. Width interval: 10 mm. e.g. 100 mm, 110 mm, 120 mm etc.
32
Max. belt pull kg/m of width
Belt weight kg/m2
Polyethylene (PE)
1200
8
Polypropylene (PP)
1400
8
Polyacetal (POM)
2060
12
Materials
No. of teeth Z
A=Outside diameter (mm)
B=Pitch diameter (mm)
C=Inside diameter (mm)
6 8 10 12
117 154 178 211
103 140 164 197
84 121 145 178
Hub width 40 mm Round bore (mm)
HUB SPECIFICATION
SPROCKET DATA
BELT DATA
EASY TO CLEAN
Square bore (mm)
Number of teeth 6Z 25ø 30ø 40ø
38x38 40x40
8Z 25ø 30ø 40ø
10Z
12Z
30ø 40ø 50ø 60ø 80ø
30ø 40ø 50ø 60ø 80ø
30x30 38x38 38x38 40x40 40x40 60x60
38x38 40x40 60x60 65x65 80x80
NGB
PLASTIC BELTS
50-908
TYPE 50
Belt surface:
Flat top.
Open area:
Closed
Strength:
The right belt for very-heavy applications.
Material/colour: PP. POM/grey. Cleanability:
Good
Application:
Very heavy transportation. Assembling belt for cars. Truck loading systems.
13
Polypropylene (PP)
6000
14
Polyacetal (POM)
10250
21
No. of teeth Z
A=Outside diameter (mm)
B=Pitch diameter (mm)
C=Inside diameter (mm)
12 18
210 307
191 288
172 269
HUB SPECIFICATION
4800
Hub width Number of teeth 40 mm 12Z 18Z Round bore (mm)
60x60 80x80 90x90
60x60 80x80 90x90
50
A
Polyethylene (PE)
B
Belt weight kg/m2
C
Max. belt pull kg/m of width
Materials
20 mm. e.g. 100 mm, 120 mm, 140 mm etc.
19
SPROCKET DATA
BELT DATA
Width interval:
33
NGB
PLASTIC BELTS
LAPORTA
GB-101
Standard measure of the belt
Belt Surface:
Open
Open Area:
62%, 16x25
Strength:
Medium & heavy application
Material/Colour:
POM/White, Green with Stainless steel wire 304/316
Cleanability:
Very good
Accessories:
40 mm flights
Application:
Bakery, packaging, vegetables, washing , cooling & freezing
Width interval:
16.6
ø2.4
16.8
33 mm
28 28
Materials
Max. belt pull kg/m of width
Belt weight kg/m2
3000
5.9
Polyacetal (POM)
15.9
33.4
33.4
10
33.4
132
No. of teeth Z
A=Outside diameter (mm)
B=Pitch diameter (mm)
C=Inside diameter (mm)
12 18
118.4 168.6
109.4 159.6
99.8 150
Hub width Number of teeth 16 mm 12Z 18Z Round bore (mm)
20 25 30 35
30 35 40 45 50 55 60
C
B
A
28
34
15.9 10
width (132xn)+20
HUB SPECIFICATION
SPROCKET DATA
BELT DATA
EASY TO CLEAN
88 120 153 186 210 252 285 318 351 384 417 450 483 516 549 582 615 648 681 714 747 780 810 848 879 912 945 978 1011 1044 1077 1110 1143 1176 1209 1242 1275 1308 1341 1374 1407 1440 1473 1506 1538 1605 1638 1671 1704 1737 1770 1803 1838 1863 1992 1935 1968 2001 2034 2067 2100 2133
NGB
PLASTIC BELTS
LAPORTA
GB-102
Standard measure of the belt
Belt Surface:
Close
Open Area:
0%
Strength:
Medium & heavy application
Material/Colour:
POM/White, Green with Stainless steel wire 304/316
Cleanability:
Good
Accessories:
40 mm flights
Application:
Packaging
Width interval:
33 mm
16.6
28
Materials
Max. belt pull kg/m of width
Belt weight kg/m2
3000
9.0
Polyacetal (POM)
15.9
33.4
10
33.4
33.4
A=Outside diameter (mm)
B=Pitch diameter (mm)
C=Inside diameter (mm)
12 18
124.8 175
109.4 159.6
99.8 150
HUB SPECIFICATION
No. of teeth Z
Hub width Number of teeth 16 mm 12Z 18Z Round bore (mm)
20 25 30 35
C
B
28
15.9 10
132 width (132xn)+20
A
SPROCKET DATA
BELT DATA
28
ø2.4
16.8
30 35 40 45 50 55 60
88 120 153 186 219 252 285 318 351 384 417 450 483 516 549 582 615 648 681 714 747 765 798 810 846 879 912 945 978 1011 1044 1077 1110 1143 1176 1209 1242 1275 1308 1341 1374 1407 1440 1473 1506 1539 1572 1605 1638 1671 1704 1737 1770 1803 1838 1863 1992 1935 1968 2001 2034 2067 2100 2133
35
NGB
PLASTIC BELTS
LAPORTA
GB-103
Standard measure of the belt
Belt Surface:
Perforated
Open Area:
15%
Strength:
Medium & heavy application
Material/Colour:
POM/White, Green with Stainless steel wire 304/316
Cleanability:
Good
Accessories:
40 mm flights
Application:
Packaging, fruit & vegetables, washing
Materials
Belt weight kg/m2
3000
7.6
Polyacetal (POM)
28
Max. belt pull kg/m of width
16.6
28
BELT DATA
16.8
33 mm
ø2.4
Width interval:
15.9
33.4
10
33.4
33.4
132
10
A=Outside diameter (mm)
B=Pitch diameter (mm)
C=Inside diameter (mm)
12 18
122.5 172.7
109.4 159.6
99.8 150
HUB SPECIFICATION
SPROCKET DATA
width (132xn)+20
No. of teeth Z
Hub width Number of teeth 16 mm 12Z 18Z Round bore (mm)
20 25 30 35
30 35 40 45 50 55 60
C
B
A
28
36
15.9
88 120 153 186 219 252 285 318 351 384 417 450 483 516 549 582 615 648 681 714 747 765 798 810 846 879 912 945 978 1011 1044 1077 1110 1143 1176 1209 1242 1275 1308 1341 1374 1407 1440 1473 1506 1539 1572 1605 1638 1671 1704 1737 1770 1803 1838 1863 1992 1935 1968 2001 2034 2067 2100 2133
NGB
PLASTIC BELTS
Belt Surface:
GB-104
LAPORTA
Raised ribs / Open for finger plates
Open Area:
62%, 16x25
Strength:
Heavy application
Material/Colour:
POM/White, Green with Stainless steel wire 304/316
Cleanability:
Very good
Accessories:
40 mm flights
Application:
Bottles, boxes, glass,
pasterizing
Materials
Belt weight kg/m2
3500
8.35
Polyacetal (POM)
28
Max. belt pull kg/m of width
16.6
28
BELT DATA
16.8
33 mm
ø2.4
Width interval:
15.9
33.4
10
33.4
33.4
132
10
B=Pitch diameter (mm)
C=Inside diameter (mm)
12 18
135.8 186
109.4 159.6
99.8 150
HUB SPECIFICATION
A=Outside diameter (mm)
Hub width Number of teeth 16 mm 12Z 18Z Round bore (mm)
20 25 30 35
30 35 40 45 50 55 60
C
B
28 A
SPROCKET DATA
width (132xn)+20
No. of teeth Z
15.9
Standard measure of the belt
76 108 141 1173 206 238 271 302 335 367 398 431 464 496 529 561 594 626 658 690 723 755 788 820 853 885 917 949 982 1014 1047 1079 1112 1144 1176 1208 1241 1273 1306 1338 1371 1403 1435 1467 1500 1532 1565 1597 1630 1662 1694 1726 1759 1791 1824 1856 1889 1921 1953 1985 2018 2050 2083
37
CURVED
NGB
PLASTIC BELTS
S-100
Belt surface:
Smooth.
Open area:
52 %
Strength:
The ideal choice for medium weight
Material/colour: POM/PP Cleanability:
Good.
Accessories:
friction modules, hold-down and steel reinforcements.25, 50, 75 mm flights, 25 mm side guards,
Application:
Spiral coolers, radius conveyors. Construction:Side modules, centre modules.
Width interval:
Normal 20 mm. e.g. 209 mm, 229 mm. Inner radiusCollapse factor from 1,5.
Rods
SPROCKET DATA
BELT DATA
Belt Material
Max. belt pull kg
Belt weight kg/m2
Polyacetal (POM)
PP Nylon Steel
75 110 150
7 7 12
Polypropylene (PP)
PP Nylon Steel
60 90 100
4.5 4.5 9.7
Steel reinforcements
Steel
350
12
No. of teeth Z
A=Outside diameter (mm)
B=Pitch diameter (mm)
C=Inside diameter (mm)
8 12 20
78 108 173
66 96 161
54 84 149
Bore (mm) ø20 - ø25 - 25x25 - 24x24x24hex ø20 - ø25 - ø30 - ø40 - 25x25 - 40x40 - 1.5”x1.5” ø25 - ø30 - ø40 - 25x25 - 40x40 - 1.5”x1.5”
12
38
A
B
C
25
NGB
PLASTIC BELTS
J-450
CURVED
Belt surface:
Smooth.
Open area:
67%.
Strength:
The right belt for heavy transportation.
Material/colour: POM, PP. Cleanability:
Good.
Accessories:
3 mm flight buds made in friction material orPOM, PP. Steel reinforcements.
Application:
Spiral coolers and radius conveyors. It can only turn in one direction.
Construction:
47 mm side modules, 200 mm centre modules.
Width interval:
Normal 33 mm. e.g. 95 mm, 128 mm,
Belt weight kg/m2 9
Polypropylene (PP)
200
7.5
No. of teeth Z
A=Outside diameter (mm)
B=Pitch diameter (mm)
C=Inside diameter (mm)
Bore
6-POM
116
104
92
flex.
11-POM
189
117
166
30
11-POM
189
117
166
40
11-POM
189
117
166
45
11-POM
189
117
166
40x40
11-steel
189
117
166
flex.
50
A
450
B
Polyacetal (POM)
C
Max. belt pull kg/m
Materials
12
SPROCKET DATA
BELT DATA
162 mm.
39
CONSTRUCTION
NGB
PLASTIC BELTS
FRAME MEASUREMENTS FOR RADIUS BELTS
Minimum 1 x Belt width
R
Minimum 1 x Belt width
For further support please contact us by fax: + 972-9-7496964
40
NGB
PLASTIC BELTS
CONSTRUCTION
RADIUS BELT DIMENSIONS S-100 A B C D
B
C
A
209 343 686 1104
270 451 902 1442
373 645 1290 2036
475 845 1690 2640
577 1061 2122 3276
679 1263 2526 3884
782 1470 2940 4504
884 1697 3394 5162
986 1903 3806 5778
1088 2143 4286 6462
701 1157 2314 3716
802 1364 2728 4332
903 1562 3124 4930
1003 1775 3550 5556
J-450 A
D
A B C D
95 133 266 456
195 283 566 956
296 444 888 1480
386 614 1228 2020
498 797 1594 2560
600 960 1920 3120
A = Standart belt width B = Inner radius C = Inner diameter D = Outer diameter
Standard width - Radius belts
belt width Min. inner radius = collapse factor x belt width
S-100
J-450
Belt width in mm. 1100 1000 900 800 700 600 500 400 300 200
2.00
1.95
1.90
1.85
1.80
1.75
1.70
100 1.65
95 128 162 195 229 262 296 329 532 566 600 633 667 701 734 768 802 835 869 903 1003 1103 1203 1303 1403
1.60
618 638 659 679 699 720 741 761 782 802 823 843 864 884 904 925 945 966 1007 1088 1190 1210 1294 1314
1.55
127 147 168 188 209 229 250 270 291 311 332 352 373 393 413 433 453 475 495 516 536 557 598
Collapse factor = min. inner radius
1.50
J-450
1.45
S-100
1.40
S-100
Collapse factor
41
NGB
PLASTIC BELTS
CONSTRUCTION
FIGURE
1 < 2000
25-100 mm
FIGURE
2 < 2000
A
B
D
C
25-100 mm
FIGURE
3 < 2000
D
F E
A
C
25-100 mm
B
A = 200 - 300 mm B = Min. 1000 mm - max. 10% of the centre distance C = 0 - 50 mm D = 12 min. ø 30 mm. - 25 min. ø 50 mm. - 50 min. ø 100 mm. E = 12 min. ø 50 mm. - 25 min. 75 mm. - 50 min. 150 mm. F = 12 min. ø 40 mm. - 25 min. ø 100 mm. - 50 min. ø 150 mm.
42
NGB
PLASTIC BELTS
CONSTRUCTION
FIGURE
1
E C D B
A
E
FIGURE
2
D
E
A = 200 - 300 mm B = Min. 1000 mm - max. 10% of the centre distance C = 0 - 50 mm D = 25 min. ø 50 mm. - 50 min. ø 100 mm. E = Min. radius 150 mm.
43
NGB
PLASTIC BELTS
CONSTRUCTION
SPROCKET SUPPORT Sprockets Nominal belt width
Standard load
Medium load
Heavy load
Nominal belt width
mm
Series 25
Series 50
Series 25
Series 50
Series 25
Series 50
Series 25
Series 50
mm
carry way
return way
carry way
return way
50
1
1
1
1
1
1
50
2
2
2
2
100
1
1
2
2
2
2
100
2
2
2
2
150
2
2
2
2
3
2
150
2
2
2
2
200
2
2
3
2
4
3
200
3
2
2
2
250
2
2
3
3
5
3
250
3
2
3
2
300
3
3
4
3
6
4
300
3
2
3
2
350
3
3
5
4
7
5
350
4
3
3
3
400
4
3
6
4
8
6
400
4
3
3
3
450
4
3
6
5
9
6
450
4
3
3
3
500
5
4
7
5
10
7
500
5
3
4
3
600
5
5
8
6
12
8
600
5
3
4
3
750
6
6
10
8
15
10
750
6
4
5
4
800
7
6
11
8
16
11
800
7
4
5
4
900
8
7
12
9
18
12
900
7
4
5
4
1000
8
8
14
10
20
14
1000
8
5
6
5
1200
10
9
16
12
24
16
1200
9
5
7
5
1500
12
11
20
15
30
20
1500
11
6
8
5
1800
15
13
24
18
36
24
1800
13
7
9
6
2100
17
15
28
21
42
28
2100
15
8
11
7
2400
20
16
32
24
48
32
2400
17
9
12
8
3000
24
20
40
30
60
40
3000
21
11
15
9
3600
29
24
48
36
72
48
3600
25
13
17
11
4000
32
28
54
40
80
54
4000
29
15
19
13
Max. space between sporkets
Max. space between sporkets
Max. space between sporkets
Max. space between sporkets
Max. space between sporkets
Max. space between sporkets
Max. space between sporkets
Max. space between sporkets
Max. space between sporkets
Max. space between sporkets
125mm
150mm
75mm
100mm
50mm
75mm
150mm
300mm 225mm
300mm
For series 25-800 and series 50-800 a minimum of “medium load” is recommended.
44
Belt support
For other widths
When Axle base CC distance is above 4 mtr., a roller is recommended on the returnway.
NGB
PLASTIC BELTS
ACCESSORIES
25.0
50.0
Fight height + 5mm
FLIGHTS 25
Standard heights on flights
Flights with round top
25.0
50.0
3 mm flight
45
NGB
PLASTIC BELTS
ACCESSORIES
75.0
50.0
25.0
100
FLIGHTS 50
75
100
50
Standard heights for flights, standard width 200mm. Also available welded.
Standard heights for side guards
Supported Flight
Flight height + 7.5 mm
142â&#x2C6;&#x17E;
50/75 mm
Bent Flight
46
75.0 & 150 mm
69/94 mm
25
Flight width round top
NGB
PLASTIC BELTS
ACCESSORIES
25
50
75
ACCESSORIES FOR CURVED BELTS
25
25
Standard heights on flights
Steel reinforcement Standard height on side guard
47
NGB
PLASTIC BELTS
ACCESSORIES
61
128
FLIGHT & FINGER PLATE LAPORTA
90o
7.2
8.4ø
35
100
185
185
Finger plate
Finger plate
40 11.3 9.3
4.8
Flights
28
10
132 width (132+n)x20
Flights
48
10
NGB
PLASTIC BELTS
ACCESSORIES
FINGER TRANSFER PLATES (25)
B
A
C
102
15
92
15
9O
49
MATERIALS
NGB
PLASTIC BELTS
MATERIAL DESCRIPTION POLYETHYLENE
Thermal plastic with a weight mass of approx. 0.92. grams/cm3. Suitable for use in cold areas. Temperature range from -73C to +66C. High chemical resistance. FDA approved. Tough yet flexible material with a high impact strength.
POLYETHYLENE
Thermal plastic with a weight mass off approx. 0.92 grams/cm3.
PLUS
Suitable for use for medium temperature areas. Temperature range from -20 C to +80C. High chemical resistance. FDA approved. Same characteristics as polyethylene, with a 30% larger tensile strength as well as a reduced impact strength.
POLYPROPYLENE
Thermal plastic with a weight mass of approx. 0.92 grams/cm3. Suitable for use in higher temperature areas. Temperature range from +5C to +100C. High chemical resistance. FDA approved. A strong material with a medium tensile strength, low impact strength at low temperatures.
POLYPROPYLENE
Thermal plastic with a weight mass of approx. 0.98 grams/cm3.
with 10%
Suitable for use in high temperature areas.
TALCUM
temperature range from +40C to 130C. High chemical resistance. FDA approved. Medium tensile strength, low impact strength at low temperatures.
POLTPROPYLENE
Thermal plastic with a weight mass of approx. 1.14 grams/cm3.
with 30%
Suitable for use in high temperature areas.
GLASS
Temperature range from +50C to +150C. High chemical resistance. A strong and consistently stable material. Extremely high tensile strength, but gives a larger friction between the support and the belt. Low impact strength at low temperatures.
50
NGB
PLASTIC BELTS
POLYPROPYLENE
Thermal plastic with a weight mass of approx. 0/98 grams/cm3.
ANTISTATIC
Suitable for use in areas requiring electrical diversion.
MATERIALS
Temperature range from +5C to +100C. High chemical resistance. Tensile strength as normal polypropylene.
POLYACETAL (POM)
Thermal plastic wuth a weight mass of approx. 1.4 grams/cm3. Suitable for use in both warm and cold areas. Temperature range from -43C to +95C. Has a limited resistance to certain chemicals.FDA approved. Consistently stable material with a high tensile strength. Low friction between belt and support. Low impact resistance at low temperatures.
POLYACETAL
Thermal plastic with a weight mass of approx. 1.4 grams</cm3.
ANTISTATIC
Suitable for use in areas requiring electrical diversion. Temperature range from -43C to +95C. Other characterisitics, are the same as polyacetal.
NYLON 6
Thermal plastic with a weight mass of approx. 1.08 grams/cm3. Suitable for use in both warm and cold areas. Temperature range from -45C to +110C. High chemical resistance. Not suitable in damp areas at high temperatures. FDA approved. Tough yet flexible material with a high tensile strength as well as a high impact strength.
NYLON 6.6
Thermal plastic with a weight mass of approx. 1.1 grams/cm3. Suitable for use in both warm and cold areas. Temperature range from -45C to +150C. High chemical resistance, tough not suitable for use in very damp areas at high temperatures. Tough yet flexible material with a high tensile strength as well as a high impact strength.
51
MATERIALS
PLASTIC BELTS
NYLON ANTISTATIC
NGB
Thermal plastic with a weight mass of approx. 1.1 grams/cm3. Suitable for use where electrical diversion is required. Temperature range from -45C to +110C. High chemical resistance. Not suitable in wet areas. Tough yet flexible material with a high tensile strength as well as a high impact strength.
FIRE RETARDING
Thermal plastic with a weight mass of approx. 0.98 grams /cm3.
POLYPROPYLENE
Suitable for use in fire hazard areas, as in microwave ovens and the like. Temperature range from +5C to +120C. High chemical resistance. Flammability VO (3, 2 mm) FDA approved. Strong material with medium tensile strength. Low impact strength at low temperatures.
FRICTION MATERIAL
Thermal plastic with a weight mass of approx. 1.14 grams/cm3. Suitable for use in both warm and cold areas. Temperature range from -25C to +80C. High chemical resistance. FDA approved. Soft material with high friction, low tensile strength. Suitable to put on the surface of PE and PP belts. Used for belts with slight inclination.
SILICONE & TEFLON An additive added to polyethylene and polypropylene. MATERIAL
This material prevents products from freezing or sticking to the belt. FDA approved. The characteristics of the basic material are not changed essentially.
52
NGB
PLASTIC BELTS
MATERIALS
THERMAL EXPANSION/CONTRACTION All types of materials change dimensions when the temperature changes Therefore you have to take this into consideration, when calculating a belt's dimension and frame construction.
Below are the relevant factors for calculating a NGB conveyor belt.
MATERIAL EXTANSION/CONTRACTION Material
Extension/contraction mm/m/C
Belt Polypropylene
PP
0.12
Polyethylene
PE
0.22
Polyacetal
POM
0.09
PE 1000
0.14
Sliding profile U and V profile Frame material Aluminium
0.02
Stainless steel
0.01
FORMULA E = L x (T2 —T1) x K C = L x (T2 —T1) x K E = Extension (mm) C = Contraction (mm) L = Length/width of belt ( m) T1 = Normal temperature (21 C) T2 = Working temperature K = Coefficient
EXAMPLE
17 MT. long 1345 mm wide PP Normal temp.21C Working temp. 85C. Length: E = 17 x (85 -21 ) x 0.12 E = 130.56 mm Width: E = 1.345 x (85 -21 ) x 0.12 E = 10.33 mm
53
MATERIALS
NGB
PLASTIC BELTS
SERVICE FACTOR (SF) 1.0
No load starts & load applied gradually Frequent starts under load, more than 1/hr
+0.2
Belt speed greater than 30 mtr./min.
+0.2
Elevating conveyors
+0.4
Pusher conveyors
+0.2
COEFFICIENT OF START-UP FRICTION BETWEEN WEARSTRIP AND BELT Belt material Wearstrip material
Polypropylene Smooth Wet
Dry
Acetal POM
Polyethylene
Abrasive
Smooth
Smooth
Wet
Dry
Wet
Dry
Wet
Dry
PEHD
0.09 0.11
-
-
-
-
0.08
0.09
Steel
0.26 0.26
0.31
0.31
0.14
0.15
0.18
0.19
COEFFICIENT OF FRICTION BETWEEN PRODUCT AND BELT Polypropylene Material
Glass Metal Plastic Cardboard
54
Polyethylene
Smooth
Acetal POM
Smooth
Smooth
Wet
Dry
Wet
Dry
Wet
Dry
0.18 0.26 0.11 -
0.19 0.32 0.17 0.21
0.08 0.10 0.08 -
0.09 0.13 0.08 0.15
0.13 0.19 0.13 -
0.14 0.20 0.15 0.13
NGB
PLASTIC BELTS
MATERIALS
THE CHEMICAL RESISTANCE OF PLASTIC MATERIALS The values in the following tables are guideline values. Factors such as filling material, temperatures, concentrations, stress, stress time etc. can alter these values dramatically. Therefore no guarantee can be given for the correctness of said values. The values are vaid at an ambient temperature of 20â&#x2C6;&#x17E;C, and unless otherwise stated, with strong concentrations.
PLASTIC MATERIAL Vehicle
%
POM
PE
PP
Acetaldehyde
40
+
+
+
Acetic acid
10
+/-
+
+
Acetic acid
80
-
+
+
Acetone
100
+
+
+
+
+
+
Alcohol Allyl alcohol
100
+
+
+
Aluminium chloride
10
+
+
+
Ammonia water
10
+
+
+
+
+
+ +
Ammonium chloride Aniline
100
+
+
Benzene
100
+
+
-
Benzyl alcohol
100
+
+
+
Boracic acid
10
+
+
+
Bromine acid
50
-
+
+
Batanol
100
+
+
+
Butyl acetate
100
+
+
-
+
+
+
Boiled saltcf. sodium chloride
Calcium carbonate Calcium chloride aqueous
10
+
+
+
20
+
+
+
+
+
+
+
+
+
Calcium chloride with sprit Calcium hydroxide Calcium carbonate Carbon dioxide Caustic potash soln
10
+
+
+
Caustic potash soln
50
+
+
+
+
+
+
10
+
+
+
carbon disulphide
100
+
+
+
Chlorine gas
100
-
+
-
-
+
+
Cellulose acetate Citric acid Chalk cf. -
Chlorine water Chloro-benzene
100
+
+
+
Chloroform
100
-
-
+
Chrome acid
10
-
-
+
EXPLANATION OF SYMBOLS
+ resistant None or only negligible in weight (<0.5%) No changes in mechanical characteristics.
+/- qualified resistance After a period of time, significant changes in weight and mass (0.5 â&#x20AC;&#x201D; 5.0%). Possible discoloration and reduction in strength and ductility. Qualified usability, though only when dealing with simple material requirements.
- inconstant It is rapidly subjected to serious attack, and changes in weight and mass (>5%), and critical in strength and ductility. Not recommended for use.
% concentration If value is given it is because no test results are available from our suppliers.
55
MATERIALS
Vehicle
NGB
PLASTIC BELTS
%
POM
PE
PP
%
POM
PE
PP
Copper chloride
+
+
+
Mineral oil
100
+
+
+
Copper sulphate
+
+
+
Nitric acid
10
-
+
+
Nitric acid -
Diesel fuel
100
+
+
+
Dioxane
100
+/-
+
+/-
concentrated
65
-
+
-
Di â&#x20AC;&#x201D;vinyl chloride
100
+
-
+
Nitrobenzene
100
+
+
+
+
+
+
Oleic acid -
Edible oil Ethyl acetate
100
+
+
+
concentrated
40
+
+
+
Ethyl alcohol
96
+
+
+
Oleic acid
10
-
+
+
Ethyl ether
100
+
+
+
Ozone
-
+
+
+
+
+
fluorine, dry
-
-
-
Phenol, melted
100
-
+
+
Freon 11
+
+
-
Phenol, aqueous
10
-
+
+
Freon 12
+
-
Phosphoric acid
10
+
+
+
Freon 22
+
-
Phosphoric acid -
+
-
concentrated
80
-
+
+
+
+
Potassium
10
+
+
+
Formaldehyde -
Petrol
Freon 113 Glycerol
90
+
Heptane
100
+
+
+
Pot. Bichromate
5
+
+
Hexane
100
+
+
+
Pot. Permanganate
1
+
+
+
Hydrargyrum
100
+
+
+
Salt cake -
Hydrochloric acid
10
-
+
+
CF sodium sulphate
Hydrochloride acid
2
-
+
+
Sea water
100
+
+
+
Hydrofluoric acid
40
-
+
+
Silicone oil
+
+
+
Hydrogen peroxide
0.5
+
+
+
Soap solution
1
+
+
+
Hydrogen peroxide
1
+
+
+
Soda ive, aqueous
50
+
+
+
Hydrogen peroxide
3
+
+
+
Soda ive, aqueous
10
+
+
+
Hydrogen peroxide
10
+
+
+
Soda - cf. sodium carbonate
Hydrogen peroxide
30
+
+
Sodium bisulphate
Hydrogen sulphide
2
+
+
Sodium carbonate
10
-
+
+
Sodium hydroxide -
10
+
+
+
+
+
+
-
Iodine/iodine - pot.iron - 111 - chloride
+
+
+
cf/ soda ive
Isopropanol
90
+
+
+
Sodium sulphate
Kerosene
100
+
+
+
Solution
10
Lactic acid
10
+
+
+
Sulpher dioxide
3
Leaching solution -
Sulphric acid
+
+
+
+
+
0.1% free chlorine
-
+
+
Sulpuric acid
98
-
-
-
Lead sugar
+
+
+
Sulphuric fuming
10
+
+
+
Liquid butane
+
+
+
Terachlorocarbon
-
-
-
Tetraline
100
+
-
-
+
+
Magbesium chloride aqueous
10
+
+
+
Thionyl chloride
100
+
Manganese sulphate
10
+
+
+
Toluene
100
+
-
-
Trichloroethylene
100
+
+
+
Mercury chloride -
56
Vehicle
aqueous
5
+
+
+
Vinyl benzene
100
+
-
+
Methanol
98
+
+
+
Water, cold
100
+
+
+
Metal acetate
100
+
+
+
Wine
+
+
+
Methyl ethyl ketone
100
+
+
+
Wax , melted
+
+
+
Methylene chloride
100
-
+
+
+
+
+
NGB
STAINLESS STEEL BELTS
LAPORTA
Standard measure of the belt
GBSS-101
Belt Surface:
Open
Open Area:
62%, 16x25
Strength:
Medium & heavy application
Material:
Stainless steel 304/316
Cleanability:
Very good
Accessories:
flights
Application:
Bakery, packaging, vegetables, washing, cooling & freezing
Width interval:
33 mm
Materials
Max. belt pull kg/m of width
Belt weight kg/m2
4000
9.0
Stainless steel
32 width
No. of teeth Z
A=Outside diameter (mm)
B=Pitch diameter (mm)
C=Inside diameter (mm)
12 18
119.8 170.0
109.8 160.0
99.8 150
HUB SPECIFICATION
SPROCKET DATA
BELT DATA
ø3
18 14
Hub width Number of teeth 16 mm 12Z 18Z Round bore (mm)
20 25 30 35
30 35 40 45 50 55 60
58
C
B
A
28
84 115 146 176 207 238 269 299 330 361 392 422 453 484 515 546 576 607 638 669 700 730 761 792 823 854 855 915 946 977 1008 1038 1069 1100 1130 1162 1192 1223 1251 1285 1316 1346 1377 1408 1439 1470 1500 1531 1562 1593 1624 1654 1685 1716 1747 1778 1808 1870 1900 1932 1962 1993 2024 2055 2086 2147 2178 2209 2240 2270 2301 2332 2363 2394 2424 2455 2486 2517
NGB
STAINLESS STEEL BELTS
LAPORTA
Standard measure of the belt
GBSS-102
Belt Surface:
Perforated
Open Area:
20%
Strength:
Medium & heavy application
Material:
Stainless steel 304/316
Cleanability:
Good
Accessories:
flights
Application:
Packaging
Width interval:
33 mm
3.5
8 4
18 14
Max. belt pull kg/m of width
Belt weight kg/m2
4000
11.0
Stainless steel
32
No. of teeth Z
A=Outside diameter (mm)
B=Pitch diameter (mm)
C=Inside diameter (mm)
12 18
119.8 170.0
109.8 160.0
99.8 150
HUB SPECIFICATION
width
Hub width Number of teeth 16 mm 12Z 18Z Round bore (mm)
30 35 40 45 50 55 60
20 25 30 35
C
B
28
A
SPROCKET DATA
BELT DATA
ø3
14
Materials
84 115 146 176 207 238 269 299 330 361 392 422 453 484 515 546 576 607 638 669 700 730 761 792 823 854 855 915 946 977 1008 1038 1069 1100 1130 1162 1192 1223 1251 1285 1316 1346 1377 1408 1439 1470 1500 1531 1562 1593 1624 1654 1685 1716 1747 1778 1808 1870 1900 1932 1962 1993 2024 2055 2086 2147 2178 2209 2240 2270 2301 2332 2363 2394 2424 2455 2486 2517
59
NGB
STAINLESS STEEL BELTS
LAPORTA
Standard measure of the belt
GBSS-103
Belt Surface:
Perforated
Open Area:
10 %
Strength:
Medium & heavy application
Material:
Stainless steel 304/316
Cleanability:
Good
Accessories:
flights
Application:
Packaging, fruit & vegetables, washing
Width interval:
33 mm
8
Materials
Max. belt pull kg/m of width
Belt weight kg/m2
4000
13.5
Stainless steel
32 width
No. of teeth Z
A=Outside diameter (mm)
B=Pitch diameter (mm)
C=Inside diameter (mm)
12 18
121.8 172.0
109.8 160.0
99.8 150
HUB SPECIFICATION
SPROCKET DATA
BELT DATA
ø3
4
18 14
Hub width Number of teeth 16 mm 12Z 18Z Round bore (mm)
20 25 30 35
30 35 40 45 50 55 60
60
C
B
A
28
84 115 146 176 207 238 269 299 330 361 392 422 453 484 515 546 576 607 638 669 700 730 761 792 823 854 855 915 946 977 1008 1038 1069 1100 1130 1162 1192 1223 1251 1285 1316 1346 1377 1408 1439 1470 1500 1531 1562 1593 1624 1654 1685 1716 1747 1778 1808 1870 1900 1932 1962 1993 2024 2055 2086 2147 2178 2209 2240 2270 2301 2332 2363 2394 2424 2455 2486 2517
NGB
STAINLESS STEEL BELTS
LAPORTA
Standard measure of the belt
GBSS-104
Belt Surface:
Open
Open Area:
30%
Strength:
Medium & heavy application
Material:
Stainless steel 304/316
Cleanability:
Good
Accessories:
flights
Application:
Packaging, fruit & vegetables, washing
Width interval:
33 mm
Materials
Max. belt pull kg/m of width
Belt weight kg/m2
4000
11.2
Stainless steel
32
No. of teeth Z
A=Outside diameter (mm)
B=Pitch diameter (mm)
C=Inside diameter (mm)
12 18
121.1 172.0
109.8 160.9
99.8 150
HUB SPECIFICATION
width
Hub width Number of teeth 16 mm 18Z 12Z Round bore (mm)
20 25 30 35
30 35 40 45 50 55 60
C
B
28
A
SPROCKET DATA
BELT DATA
ø3
18 14
84 115 146 176 207 238 269 299 330 361 392 422 453 484 515 546 576 607 638 669 700 730 761 792 823 854 855 915 946 977 1008 1038 1069 1100 1130 1162 1192 1223 1251 1285 1316 1346 1377 1408 1439 1470 1500 1531 1562 1593 1624 1654 1685 1716 1747 1778 1808 1870 1900 1932 1962 1993 2024 2055 2086 2147 2178 2209 2240 2270 2301 2332 2363 2394 2424 2455 2486 2517
61
NGB
NGB
COMPONENTS
COMPONENTS
67
COMPONENTS
NGB
NGB
LF 820 T=4mm / LF 831 T=5mm Chain No.
Width K mm
GC Straight Curve mm
LF 820-K250 83.5 LF 820-K325/831 82.6 LF 820-K350 88.9 LF 820-K400 101.6 LF 820-K450 114.3 LF 820-K600 152.4 LF 820-K750 190.5 Material: LF Acetal Brown Pitch: 38.1 mm Standard length: 10 ft (3.048m)
Working load KN (max)
44.5
1.23
LF 821 (HEAVY DUTY) Chain No.
Width K mm
Working load KN (max)
LF821-K750 LF821-K1000 LF821-K1200
190.5 254 304.8
2.6
Material: LF Acetal Brown Pitch: 38.1 mm Standard length: 10 ft (3.048m)
LF RO821 / RO831 Chain No.
Width K mm
LF RO831-K325 LF RO821-K750
190.5 82.6
Material: LF Acetal Brown Pitch: 38.1 mm Standard length: 10 ft (3.048m)
68
GC Straight Curve Min Max 42.5
44.5
Working load KN (max)
2.6
NGB
NGB
COMPONENTS
LF 880TAB Chain No.
Width K mm
Radius Min R mm
LF 880TAB-K325 LF 880TAB-K450
82.6 114.6
460 500
GC Straight Curve Min Max 44.2
56
Working load KN (max) 2
Material: LF Acetal Brown Pitch: 38.1 mm Standard length: 10 ft (3.048m)
LF 880BS TAB Chain No. LF 880BSTAB-K325
Width K mm 82.6
Radius Min R mm 200
GC Straight Curve Min Max 44.2 46
Working load KN (max) 1.7
Material: LF Acetal Brown Pitch: 38.1 mm Standard length: 10 ft (3.048m)
LF 882TAB Chain No.
Width K mm
Radius Min R mm
LF 882TAB-K750 LF 882TAB-K1000 LF 882TAB-K1200
190.5 254 304.8
610
GC Straight Curve Min Max 61.9
58
Working load KN (max)
2.6
Material: LF Acetal Brown Pitch: 38.1 mm Standard length: 10 ft (3.048m)
69
NGB
NGB
COMPONENTS
N60 M10 M12 M16 60
H mm
L mm
50 mm
91 mm
100 mm
141 mm
150 mm
191 mm
200 mm
241 mm
Galvenized or Stainless steel
N80
M16
80
H mm
L mm
50 mm
88 mm
100 mm
138 mm
150 mm
188 mm
200 mm
238 mm
Galvenized or Stainless steel
N100
M16 M20 M24 100
H mm
L mm
50 mm
99 mm
100 mm
149 mm
150 mm
199 mm
200 mm
249 mm
Galvenized or Stainless steel
N14822
77
COMPONENTS
NGB
N8110095
N8330125 (48.3) N8330126 (50.9)
N8330119 (48.3) N8330126 (60.3)
78
NGB
NGB
NGB
COMPONENTS
N8330135
DF = 48.3
N8330048 (48.3*42.4) N8330050 (60.3*42.4)
DF1 = 42.4/48.3/60.3 DF2 = 42.4
N8330053 (48.3) N8330054 (50.9) N8330055 (60.3)
DF = 48.3/50.9/60.3
79
COMPONENTS
N8210040
N8210088
N8210212
80
NGB
NGB
NGB
NGB
COMPONENTS
N8240023
N8240068
N8240211
81
COMPONENTS
N8210112
N8210133
N8210525
82
NGB
NGB
NGB
NGB
COMPONENTS
N8240126
N8240156
N8240118
83
COMPONENTS
N8210142
N8210169
N8210134
84
NGB
NGB
NGB
NGB
COMPONENTS
N8240143
N8240162
N8240135
85
NGB
NGB
COMPONENTS
14T-2 Tapped Roller Tube Quality PVC
Zinc Plated Steel
Stainless Steel
Dia. Wall thickness DxW 50 x 3.0 60 x 3.0 50 x 1.5 50 x 2.0 60 x 2.0 50 x 1.5 50 x 2.0 60 x 2.0
Female threaded spindle
Female threaded spindle
11T-1 plastic sprocket for chain 1/2 x 5/16” 08B-1
14T-1 plastic sprocket for chain 1/2 x 5/16” 08B-1
Female threaded spindle
Female threaded spindle
11T-2 plastic sprocket for chain 1/2 x 5/16” 08B-1
14T-2 plastic sprocket for chain 1/2 x 5/16” 08B-1
93
COMPONENTS
NGB
NGB
PVC ROLLER Type
Tube 20X1,0 20X1,5 30X1,0 30X1,8 40X1,5 40X2,3
50X1,5
50X2,0
50X2,8
60X1,5
60X2,0
KTR 00, 01
Load 1000 N
Shaft .01 .00 .01 .00 .01 .00 .01 .00 .01 .00 .01 .00 .02 .03 .30 .31 .40 .02 .03 .30 .31 .40 .02 .03 .30 .31 .40 .30 .31 .40 .30 .31 .40
S.3 S.3 S.3 S.3 S.4 S.4 S.4 S.4 S.4 S.4 S.4 S.4 S.6/7 S.6/7 S.11 S.11 S.13 S.6 S.6 S.11 S.11 S.13 S.6/7 S.6/7 S.11 S.11 S.13 S.11 S.11 S.13 S.11 S.11 S.13
X X X X X X
5 5 5 5 5 5 5 5
X
6 6 6 6 6 6 6 6 6 6 6 6 6 6
X
X
6 6
X
X X
X
X
KTR 02, 03
Plastic bearing with or without plastic retainer, one row of balls.
Plastic bearing with or without plastic retainer, two rows of balls.
Plastic bearing with or without plastic retainer, one row of balls, stainless.
Plastic bearing with or without plastic retainer, two rows of balls, stainless.
6 6
8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
11 11 11
11 11 11
11 11 11 11 11 11 11 11 11
12 12 12 12 12
12 12 12 12 12 12 12 12 12 12 12 12 12 12
KTR 30, 31 Metal bearing, pressed, hardened, with or without retainer, bearing bush. Metal bearing, pressed, hardened, without retainer, greased, bearing bush. Metal bearing, pressed, hardened, with retainer, bearing bush, stainless.
94
14 14 14
15 15 15
14 14 14
15 15 15
14 14 14 14 14 14 14 14 14
15 15 15 15 15 15 15 15 15
5 5 5 5 7 7 7 7 7 7 7 7 10 10 80 25 80 10 10 80 25 80 10 10 80 25 80 80 25 80 80 25 80
KTR 40 Standard ball bearing, DIN 625, Typ 6202 Standard ball bearing, DIN 625, Typ 6201
NGB
NGB
COMPONENTS
STEEL/STAINLESS STEEL ROLLERS Type
Tube
48X2,0
50X1,5
50X2,0
60X1,5
60X2,0
Load 1000 N
Shaft .20 .30 .30-1 .30-2 .20 .30 .30-1 .30-2 .40 .20 .30 .30-1 .30-2 .40 .20 .30 .30-1 .30-2 .20 .30 .30-1 .30-2 .040
MTR 20 Metal bearing, pressed, hardened, with plastic or metal retainer, bearing bush.
S. 21 S. 22 S. 24 S. 23 S. 21 S. 22 S. 24 S. 23 S. 25/26 S. 21 S. 22 S. 24 S. 23 S. 25/26 S. 21 S. 22 S. 24 S. 23 S. 21 S. 22 S. 24 S. 23 S. 25/26
6
6
6
6
6
8 8
8 8
8 8
8 8
8 8
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
MTR 30 Metal bearing, pressed, hardened, with or without retainer, bearing bush
11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11
12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12
14 14
15 15
14 14
15 15 15
14 14
15 15 15
14 14
15 15
14 14
15 15 15
80 120 120 120 80 120 120 120 120 80 120 120 120 120 80 120 120 120 80 120 120 120 150
MTS 89 Standard ball bearing, DIN 625, Yyp 6204
95