Assessing your damage 1.) It is firstly very important to assess the damage of the window you are looking to replace. Sometimes a very serious looking problem can be solved with a simple dab of epoxy solution or a fresh coat of paint. Moreover, for other instances it would be better to contact a specialist, and window replacement in Simi Valley would be the best place to start. Acquiring materials 2.) Once damage is assessed and you realize the need for replacing windows isn’t too severe you can obtain all the supplies you need at your local home improvement store. A hammer, some epoxy, several nails, painters caulk to seal cracks, painters tape, and your paint of choice should not run you more than $75-$100 dollars. Once the supplies are in hand you are ready to repair that window. Going through with the repair 1. Extract the inside pieces from the window. The ones that stop the window from sliding. Be extra careful when removing these pieces; as you will reuse them when installing the new windows. 2.
Carefully take out the inside sash.
3. Slide the outside sash to the bottom of the window, and extract. This piece should slide right out. 4. Clean the cracks between the window and its frame thoroughly, this is an important step as a clean window sash is imperative when replacing all the usable original parts back onto the window. 5. Fill in any cracks or holes with epoxy and let dry for 20-30 minutes. (Make sure there is no termite damage as this can be a real problem for the structural integrity of the window in the future.) Follow the process backwards to replace your window, if a window is irrepairable, please contact a professional such as: window replacement in Simi Valley.