Novoflex samengesteld productoverzicht_eng

Page 1

Adapters

N

NOVOFLEX

ADAPTERS _ ADAPTER RINGS | adjustment to infinity with all adapters

_

Application examples

_ _ _ _ _

_

PRODUCT INFORMATION

Optional accessory: ASTAT NEX

NOVOFLE X offers a large variety of high precise fine mechanic adapters to connect lenses and cameras of different manufacturers. With all adapters and/or adapter combinations infinity adjustment of the lens is possible. None of the adapters will transfer any function from the camera body to the lens. With almost all cameras automatic exposure metering (stop-down metering/aperture priority) is possible. All adapters are machined high precisely to ensure the correction of the flange focal length differences. The adapter models MFT/NIK, MFT/MIN-AF, MFT/PENT, NEX/NIK, NEX/MIN-AF, NEX/PENT, NX/NIK,NX/MIN-AF, NX/PENT and EOS/NIK NT (for Nikon, Sony Alpha / Minolta AF and Pentax K lenses) are equipped additionally with a stepless f-stop control ring and can therefore be used with lenses that do not come with a built-in manual aperture control ring.

With compliments

910/E/04.11/AD

When mounting long or heavy lenses to Sony NEX cameras, we recommend the use of the adapter collar ASTAT-NEX to relieve the strain from the camera body thread. The ASTAT-NEX can be mounted on any 1/4“ and 3/8“ thread or to the NOVOFLEX Q dovetail quick release system (Arca compatible). Please note that due to technical reasons only certain camera-lens combinations are possible. See page 2 for the most common adaptions. For a complete overview of all available models visit the „adapter finder“ at www.novoflex.com

NOVOFLEX Präzisionstechnik GmbH Brahmsstraße 7, D-87700 Memmingen Telefon +49 8331 88 888, Fax +49 8331 47 174 mail@novoflex.de, www.novoflex.de


Adapters FourThirds = i.e. Olympus E-System, Panasonic Lumix L, Leica DigiLux MicroFourThirds = i.e. Olympus PEN, Panasonic Lumix G … Camera to lens

Adapter

Canon EOS

| Leica R

| EOS/LER

Canon EOS

| Nikon

| EOS/NIK

Canon EOS

| Nikon

| EOS/NIK NT*

Canon EOS

| M42

| EOS/CO

Camera

To lens

Adapter

Samsung NX

| Canon FD

| NX/CAN

Samsung NX

| Contax/Yashica

| NX/CONT

Samsung NX

| Leica R

| NX/LER

Samsung NX

| M 42

| NX/CO

Samsung NX

| Minolta AF/Sony

| NX/MIN-AF*

FourThirds

| M42

| FT/CO

Samsung NX

| Minolta MD

| NX/MIN-MD

FourThirds

| Contax/Yashica

| FT/CONT

Samsung NX

| Nikon

| NX/NIK*

FourThirds

| Leica R

| FT/LER

Samsung NX

| Olympus OM

| NX/OM

FourThirds

| Nikon

| FT/NIK

Samsung NX

| Pentax K

| NX/PENT*

FourThirds

| Olympus OM

| FT/OM

Samsung NX

| T2

| NX/T2

FourThirds

| Pentax K

| FT/PENT

FourThirds

| T2

| FT/T2

| HARING + CANA

Canon FD

| Hasselblad

Canon EOS

| Hasselblad

| HARING + CANA-AF

M42

| Hasselblad

| HARING + COA

MicroFourThirds

| Canon FD

| MFT/CAN

MicroFourThirds

| Contax/Yashica

| MFT/CONT

Contax/Yashica

| Hasselblad

| HARING + CONTA

MicroFourThirds

| Leica M

| MFT/LEM

Leica R

| Hasselblad

| HARING + LEA-R

MicroFourThirds

| Leica R

| MFT/LER

Minolta MD

| Hasselblad

| HARING + MINA

MicroFourThirds

| M42

| MFT/CO

Minolta AF

| Hasselblad

| HARING + MINA-AF

MicroFourThirds

| Minolta AF / Sony

| MFT/MIN-AF *

Nikon

| Hasselblad

| HARING + NIKA

MicroFourThirds

| Minolta MD

| MFT/MIN-MD

Olympus OM

| Hasselblad

| HARING + OMA

MicroFourThirds

| Nikon

| MFT/NIK *

Pentax K

| Hasselblad

| HARING + PENTA

MicroFourThirds

| Olympus OM

| MFT/OM

Rollei SL35

| Hasselblad

| HARING + ROLA

MicroFourThirds

| Pentax K

| MFT/PENT *

Samsung NX

| Hasselblad

| HARING + NXA

MicroFourThirds

| T2

| MFT/T2

Contax 645

| Hasselblad

| CONTHA 645

FourThirds

| Hasselblad

| HARING + OMA-DIGI

Sony NEX

| Canon FD

| NEX/CAN

MicroFourThirds

| Hasselblad

| HARING + MFTA

Sony NEX

| Contax/Yashica

| NEX/CONT

Sony NEX

| Leica M

| NEX/LEM

Canon FD

| Mamiya 645

| MAMRING + CANA

Sony NEX

| Leica R

| NEX/LER

Canon EOS

| Mamiya 645

| MAMRING + CANA-AF

Sony NEX

| M42

| NEX/CO

M42

| Mamiya 645

| MAMRING + COA

Sony NEX

| Minolta AF / Sony

| NEX/MIN-AF *

Contax/Yashica

| Mamiya 645

| MAMRING + CONTA

Sony NEX

| Minolta MD

| NEX/MIN-MD

Leica R

| Mamiya 645

| MAMRING + LEA-R

Sony NEX

| Nikon

| NEX/NIK *

Minolta MD

| Mamiya 645

| MAMRING + MINA

Sony NEX

| Olympus OM

| NEX/OM

Minolta AF

| Mamiya 645

| MAMRING + MINA-AF

Sony NEX

| Pentax K

| NEX/PENT *

Nikon

| Mamiya 645

| MAMRING + NIKA

Sony NEX

| T2

| NEX/T2

Olympus OM

| Mamiya 645

| MAMRING + OMA

Pentax K

| Mamiya 645

| MAMRING + PENTA

| Canon FD

| LEM/CAN

Rollei SL35

| Mamiya 645

| MAMRING + ROLA

Leica M Leica M

| M42

| LEM/CO

Samsung NX

| Mamiya 645

| MAMRING + NXA

Leica M

| Contax/Yashica

| LEM/CONT

FourThirds

| Mamiya 645

| MAMRING + OMA-DIGI

Leica M

| Leica R

| LEM/LER

MicroFourThirds

| Mamiya 645

| MAMRING + MFTA

Leica M

| Minolta MD

| LEM/MIN

Leica M

| Nikon

| LEM/NIK

Canon FD

| Pentax 67

| PENTRING 67 + CANA

Leica M

| Olympus OM

| LEM/OM

Canon EOS

| Pentax 67

| PENTRING 67 + CANA-AF

Leica M

| Pentax K

|LEM/PENT

M42

| Pentax 67

| PENTRING 67 + COA

Contax/Yashica

| Pentax 67

| PENTRING 67 + CONTA

Canon XL

| Canon FD

| XL-CAN

Leica R

| Pentax 67

| PENTRING 67 + LEA-R

Canon XL

| M42

| XL-CO

Minolta MD

| Pentax 67

| PENTRING 67 + MINA

Canon XL

| Contax/Yashica

| XL-CONT

Minolta AF

| Pentax 67

| PENTRING 67 + MINA-AF

Canon XL

| Leica R

| XL-LER

Nikon

| Pentax 67

| PENTRING 67 + NIKA

Canon XL

| Minolta MD

| XL-MIN

Olympus OM

| Pentax 67

| PENTRING 67 + OMA

Canon XL

| Nikon

| XL-NIK

Pentax K

| Pentax 67

| PENTRING 67 + PENTA

Canon XL

| Olympus OM

| XL-OM

Rollei SL35

| Pentax 67

| PENTRING 67 + ROLA

Canon XL

| Pentax K

| XL-PENT

Samsung NX

| Pentax 67

| PENTRING 67 + NXA

FourThirds

| Pentax 67

| PENTRING 67 + OMA-DIGI

MicroFourThirds

| Pentax 67

| PENTRING 67 + MFTA

* with stepless f-stop control ring; can be used also with lenses that do not come with a built-in manual aperture control ring Technical specifications subject to change without notice.


Automatic bellows for Canon EOS MACRO ACCESSORIES _ BALCAN-AF

N

NOVOFLEX

| AUTOMATIC BELLOWS

_ _ _ _ _ _

_

PRODUCT INFORMATION

The classic route to macro and micro photography is via a bellows. The automatic bellows BALCAN-AF was designed for the use with Canon EOS cameras and lenses and transfers all functions between the camera and the lens.

TECHNIcal specifications

With compliments

Order code: | BALCAN-AF Size: | h = 110 mm (4.33") | b = 80 mm (3.14") | total lenght = 134 mm (5.27") Minimum extension: | 50 mm (1.96") Maximum extension: | 130 mm (5.11") Travel slide: | 65 mm (2.55") Max. ø lens: | 80 mm Weight: | 430 g (0.94 lbs)

610/D/06.05/AD

Technical specifications subject to change without notice.

NOVOFLEX Präzisionstechnik GmbH Brahmsstraße 7, D-87700 Memmingen Telefon +49 8331 88 888, Fax +49 8331 47 174 mail@novoflex.de, www.novoflex.de


N

Ball heads NQ | 40 | 30 | 19

NOVOFLEX

Ball heads _ Ball NQ BALL 30 BALL 40 _

| Ball head | Ball head | Ball head

| Q=MOUNT | Q=SYSTEM | Uniklem

| BASICBALL

| Uniklem

| BASICBALL

_ _ _ _ _

_ BALL NQ

BALL 30

BALL 40

PRODUcT INFORMATION

BALL NQ | BALL 30 | BALL 40 The Novoflex Ball NQ ball head is a classic ball-and-socket head that‘s designed for ultimate precision and stability. The Ball NQ is intended for studio or outdoor photography – its corrosion-free materials ensure that it will survive any elemental rigors. The low-profile head measures only 3.1“ high yet supports loads up to 15.5 lb.The easy-to-move ball permits a 360° rotation. The ball can be locked in any desired position by means of a winged screw. An integrated level helps to align the camera precisely in the right position. A peculiarity is the lubricant- free seat of the ball, which prevents fast retention. Furthermore, the corrosion-free materials make the universally applicable tripod head a true outdoor tool. The ball head is equipped with a camera quick-release Q-Mount. The two ball heads 30 and 40 (BALL 30 / BALL 40) easily prove their stability and high precision. The pan rotation over 360° is locked with a knob. The ball head 30 (BALL 30) holds equipment up to 5 kg / 11 lbs, the ball head 40 (BALL 40) up to 10 kg / 22 lbs without any problems. Characteristic is the grease-free operation of the ball, which eliminates problems with dust and dirt. Noncorrosive materials make both balls genuine outdoor products. The ball heads 30 and 40 (BALL 30 / BALL 40) are the ideal addition to the NOVOFLEX universal clamps (UNIKLEM) and the NOVOFLEX mini tripod (BASIC BALL). TECHNIcal specifications

160/D/04.11/AD

Order code: Dimensions: Weight: Tripod connection: Camera connection: Load rating:

With compliments

| BALL NQ | h = 80 mm (3.1"), Ø = 75 mm (3") | 460 g (1.01 lbs) | 1/4" bzw 3/8" | Q=PLATE | 7 kg (15.5 lbs)

Technical specifications subject to change without notice.

Order code: Dimensions: Weight: Tripod connection: Camera connection: Load rating:

| BALL 30 | h = 75 mm (3"), Ø = 41 mm (1.6") | 255 g (0.56 lbs) | 1/4" | 3/8" | 1/4" | 5 kg (11 lbs)

Order code: Dimensions: Weight: Tripod connection: Camera connection: Load rating:

| BALL 40 | h = 95 mm (3.7"), Ø = 53 mm (2.1") | 485 g (1.07 lbs) | 1/4" | 3/8" | 1/4" | 10 kg (22 lbs)

NOVOFLEX Präzisionstechnik GmbH Brahmsstraße 7, D-87700 Memmingen Telefon +49 8331 88 888, Fax +49 8331 47 174 mail@novoflex.de, www.novoflex.de


Ball heads 19" Ball Heads _ BALL 19 BALL 19P NEIGER 19 NEIGER 19P

| Ball Head | Ball Head | Ball Head | Ball Head

BALL 19

| Uniklem 26/42

| micropod | bbstock

| Uniklem 26/42

| micropod | bbstock

| Uniklem 26/42

| micropod | bbstock

| Uniklem 26/42

| micropod | bbstock

neiger 19

BALL 19P

neiger 19P

PRODUcT INFORMATION

Ball 19 | Ball 19P | Neiger 19 | Neiger 19P The compact and sturdy ball heads 19 and 19 P (BALL 19 / BALL 19P) hold equipment up to 3 kg / 6.6 lbs without problems. The version „P“ adds a separate lock for the panorama function. The ball heads NEIGER 19 and NEIGER 19P are supplied with a special flash-shoe. With these ball heads not only flashes can be positioned accurately, but also video lights, lighting gobos, measuring instruments and much more. The NEIGER 19P also possesses a panorama lock knob. All four tripod heads are universally applicable; we recommend them particularly for the NOVOFLEX universal clamps 26 and 42 (UNIKLEM 26/UNIKLEM 42), the NOVOFLEX mini tripod (MICROPOD) and the NOVOFLEX monopod (BB-STOCK). TECHNIcal specifications

Order code: Dimensions: Weight: Tripod connection: Camera connection: Load rating:

| BALL 19 | h = 56 mm (2.2"), Ø = 30 mm (1.8") | 92 g (0.20 lbs) | 1/4" | 3/8" | 1/4" | 3 kg (6.6 lbs)

Order code: Dimensions: Weight: Tripod connection: Camera connection: Load rating:

| BALL 19P | h = 66 mm (2.6"), Ø = 30 mm (1.8") | 118 g (0.26 lbs) | 1/4" | 3/8" | 1/4" | 3 kg (6.6 lbs)

Order code: Dimensions: Weight: Tripod connection: Camera connection: Load rating:

| NEIGER 19 | h = 56 mm (2.2"), Ø = 30 mm (1.8") | 92 g (0.20 lbs) | hot shoe | 1/4" | 1/4" | 3 kg (6.6 lbs)

Order code: Dimensions: Weight: Tripod connection: Camera connection: Load rating:

| NEIGER 19P | h = 66 mm (2.6"), Ø = 30 mm (1.8") | 118 g (0.26 lbs) | hot shoe | 1/4" | 1/4" | 3 kg (6.6 lbs) Technical specifications subject to change without notice.


Universal bellows MACRO ACCESSORIES _ BALPRO 1

| UNIVERSAL BELLOWS

N

NOVOFLEX

| Camera adapter

| LENS adapteR

| LENS HEADS

_ _ _ _ _ _

_

PRODUCT INFORMATION

Combinations galore – the BALPRO 1 universal bellows The NOVOFLEX BALPRO 1 universal bellows is the most versatile bellows on the market. With its complete adapter ring system it supports almost any combination of lens and camera systems. You can combine most middle-format lenses and nearly all 35 mm lenses and special lenses with any size camera body up to 6 x 7 format. Thanks to its compact dimensions, the BALPRO 1 is also ideal for on the road and in the field. It is possible to create a fully automatic bellows for the CANON EOS system by combining the BALPRO 1 with the automatic reversing ring for EOS from NOVOFLEX (EOS-RETRO).

TECHNICAL DATA

Order code: Size: Weight: Minimum extension: Maximum extension:

WITH COMPLIMENTS

| BALPRO 1 | h = 150 mm (5.9”), b = 115 mm (4.52”), l = 200 mm (7.87”) | 755 g (1.6 lbs) | 40 mm (1.57“) | 192 mm (7.55”)

NOVOFLEX Präzisionstechnik GmbH Brahmsstrasse 7, D-87700 Memmingen Telephone +49 8331 88 888, Fax +49 8331 47 174 mail@novoflex.de, www.novoflex.de


Universal bellows

ACCESSORIES

35mm Lens

BALPRO 1 – BALPRO T/S

Adapter

CANON EOS* | * Canon FD | LEICAN and Contax/Yashica |LEICONT and C-Mount | LEICE and LEICA-thread | PROLEI Leica-R | LEI-F and Leica-M | LEI-M and M 42 | LEICO and Mikroskop-Objektive | LEIMIK and Minolta MD | LEIMIN and Nikon AI, AF | LEINIK and Nikon G** | LEINIK NT and Olympus OM | LEIOM and Pentax | LEIPENT and 6x6 Lens

CONNECTIONS FOR BALPRO 1 AND BALPRO T/S

35mm SLR Camera

BALPRO 1 – Adapter BALPRO T/S

Canon EOS * | CANA-AF and APRO oder PROshift+ Canon FD | CANA and APRO oder PROshift+ Contax/yashica |CONTA and APRO oder PROshift+ FOUR THIRDS | OMA-DIGI and APRO oder PROshift+ Leica-R | LEA-R and APRO oder PROshift+ M 42 | COA and APRO oder PROshift+ MICRO FOUR THIRDS | MFTA and APRO oder PROshift+ Minolta | MINA and APRO oder PROshift+ Minolta-AF / Sony α | MINA-AF and APRO oder PROshift+ Nikon | NIKA and APRO oder PROshift+ Olympus OM | OMA and APRO oder PROshift+ Pentax, Sigma | PENTA and APRO oder PROshift+ Rollei SL 35 | ROLA and APRO oder PROshift+ SAMSUNG NX | NXA and APRO oder PROshift+ SONY NEX | NEXA and APRO oder PROshift+ 6x6 MF Camera

BALPRO 1 – Adapter BALPRO T/S

CONTAX 645 EXAKTA 66 HASSELBLAD 2000/205 MAMIYA 645 PENTAX 645 PENTAX 67

| CONTPRO | EXPRO | HAPRO | MAMPRO | TAXPRO | PENTPRO

PROLEI PROLEI PROLEI PROLEI PROLEI PROLEI PROLEI PROLEI PROLEI PROLEI PROLEI PROLEI

BALPRO 1 – Adapter BALPRO T/S

EXAKTA 66 HASSELBLAD 2000/205 MAMIYA 645 PENTAX 645 PENTAX 67

| PROEX | PROHA | PROMAM | PROTAX | PROPENT

Adapter for Baluni bellows rings | UNIPRO Shift-Adapter | PROshift+ * To get an automatic bellow for Canon EOS you need the following combination to connect: | EOS-RETRO | EOS/PRO | PRO/EOS ** adapter with stop-down function NOVOFLEX offers two special lens heads (APO DIGITAR) by Schneider in Bad Kreuznach for the BALPRO 1 bellows, which are optimized for digital cameras. These lens heads are flush-mounted permanently on the bellows. 2 focal lengths are available: SCHNEIDER Apo-Digitar 4,0/80 mm Order code: | PRO-APO-DIGI 80 SCHNEIDER Apo-Digitar 5,6/100 mm Order code: | PRO-APO-DIGI 100 The lenses allow adjustment to infinity with all cameras. 35mm SLR cameras require the 80 mm lens head, the Mamiya 645 the 100 mm lens head. The setting for 35 mm cameras ranges from infinity to 1.8x enlargement.


N

BasicBall

NOVOFLEX

ministativ _ BasicBall | ministativ

|teleskopwanderstöcke |stativbeinverlängerungsset

_ _ _ _ _ _

PRODUKTINFORMATION

Der NOVOFLEX BasicBall wurde speziell für die bodennahe Fotografie, die Table Top Fotografie und für Natur-Fotografie entwickelt. Der BasicBall bildet eine stabile Basis für Kugelköpfe und Kameraneiger wie beispielsweise den 2-D-Neiger D IN O, den MagicBall, den Ball 19 oder den ClassicBall von NOVOFLEX, aber auch für nahezu alle Neiger anderer Hersteller. Der BasicBall ist geeignet für Kameras und Zubehör bis zu 25 kg. Umfangreiches Zubehör ermöglicht die Adaption von Blitzgeräten, Videoleuchten oder Mikrofonen. TECHNISCHE DATEN

Bestellcode: Größe: Gewicht: Gewicht mit 3 NOVOFLEX-Teleskopstöcken: Belastbarkeit m. Teleskopstöcken:

| BB blau | Ø 60 mm | 390 g

| BB silber | Ø 60 mm | 390 g

| 1100 g | 10 kg

| 1100 g | 10 kg

lieferumfang

BasicBall = Halbkugel mit 9 1/4" Bohrungen + 1 1/4"-Stativgewinde + 3 x 20cm Stativbeine

260/D/06.05/AD

MIT FREUNDLICHEN EMPFEHLUNGEN

NOVOFLEX Präzisionstechnik GmbH Brahmsstraße 7, D-87700 Memmingen Telefon +49 8331 88 888, Fax +49 8331 47 174 mail@novoflex.de, www.novoflex.de


BasicBall ZUBEHÖR

Der BasicBall ist äußerst vielseitig einsetzbar: Als Tisch- oder Ministativ Neun verschiedene Bohrungen für die Stativbeine ermöglichen eine Höhenverstellung von 6 cm, 14,5 cm und 21 cm. Mit den optional erhältlichen Verlängerungen kann eine Höhe von 33 cm erreicht werden. Große, gummierte Kugeln an den Beinenden sorgen für einen sicheren Stand. Als 1-Bein-, 2-Bein- oder 3-Bein-Stativ Stativbeinverlängerungsset 15 cm Bestellcode: Länge: Gesamtgewicht:

| MPSET | 3 Stangen á 150 mm | 90 g

Mit den NOVOFLEX Teleskop-Wanderstöcken lässt sich der BasicBall zu einem vollwertigen 1-, 2- oder 3-Bein-Stativ mit einer variablen Einstellhöhe von 61 cm bis maximal 130 cm ausbauen. Ideal für Trekkingtouren, bei denen Gewicht eine große Rolle spielt. Die Teleskop-Wanderstöcke sind mit einem 1/4“ Stativgewinde, der von einem bequemen Holzknauf abgedeckt wird und einer Handschlaufe ausgestattet. So wird blitzschnell aus einem komfortablen Wanderstock ein stabiles Stativbein. Novoflex-Teleskopwanderstöcke Bestellcode: Länge: Gewicht:

| BBSTOCK | 68 cm bis max. 145 cm | 310 g

Als Bruststativ In Verbindung mit einem Stativkopf lässt sich der BasicBall auch hervorragend als Bruststativ einsetzen. Besonders gut geeignet für diesen Einsatz sind der 2-D-Neiger D IN O und der MagicBall von NOVOFLEX. Mit dem BasicBall stellt NOVOFLEX einmal mehr seine Kompetenz als Spezialist für innovative Problemlösungen unter Beweis.

BasicBall-Griff Die Kombination von BasicBall-Griff und BasicBall ermöglicht ein ideales Halten von Kameras, Objektiven mit Stativschelle, Videokameras etc. Der Handgriff lässt sich in verschiedene Winkel einsetzen und ermöglicht dadurch ein bequemes Halten. BasicBall-Griff und BasicBall mit zwei Stativbeinen ergeben ein ideales Bruststativ. Bestellcode: Gewicht: Abmessungt:

| BB-GRIFF | 210 g | 140 mm


./6/&,%8

฀ ฀ ฀ ฀ ฀ ฀฀฀ ฀ ฀

฀฀

฀ ฀

฀ ฀

฀ ฀

฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀

฀ ฀ ฀

฀ ฀

฀ ฀ ฀ ฀ ฀

฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀

฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀

฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀

฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀฀ ฀ ฀ ฀ ฀

฀ ฀ ฀

฀฀ ฀ ฀ ฀ ฀ ฀฀ ฀

฀ ฀ ฀฀ ฀฀ ฀ ฀฀ ฀฀ ฀฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀

฀ ฀ ฀

฀ ฀ ฀ ฀ ฀ ฀ ฀

฀฀ ฀ ฀ ฀ ฀ ฀ ฀

฀ ฀ ฀฀ ฀฀ ฀ ฀฀ ฀฀ ฀฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀

฀ ฀ ฀

฀ ฀ ฀

฀ ฀


N

Castel-Cop-Digi

NOVOFLEX

FOCUSING RACK _ CASTEL-COP-DIGI | SLIDE DUPLICATOR

| CASTEL-MINI | BALPRO 1 | BALPRO T/S | CASTEL-L | CASTEL-Q

_ _ _ _ _ _

_

TOP TIP

Use a CASTEL-Q focusing rack and Q=BASE mounting plates for transverse camera adjustment. Cameras with a tripod connection on the side can be precisely positioned in this way. This speeds up work enormously when selecting the picture area to be copied because otherwise the whole tripod would have to be set up again. PRODUCT INFORMATION

The technology transition from analog to digital is influencing the way existing slides and negatives are handled and archived. An ideal solution is now available with the CASTEL-COP-DIGI slide duplicator from NOVOFLEX that allows fast and easy digitalization of your originals, from 35 mm up to 6 x 7 cm medium format. The digital slide duplicator is designed to be used with the NOVOFLEX Castel-L/Castel-Q/Castel-mini focusing racks, plus most of the current NOVOFLEX bellows with rack-and-pinion drive. This duplicating method is especially recommended if larger quantities of negatives or slides need to be digitized quickly with a digital camera. The high quality of today‘s digital cameras ensures first-rate results in double quick time and many users prefer this method to scanning with a slide scanner. The digital slide duplicator reliably positions framed 35 mm or medium-format slides or film strips. The NOVOFLEX slide duplicator can be used without any problems with macro lenses up to 105 mm. What are the advantages of digital copies over scanning? The higher the resolution of your digital camera, the better will be the final result. Conventional scanners often lack the quality of digital SRL cameras, and scanning are often takes considerably longer than shooting with a camera.

TECHNICAL DATA

470/E/06.05/AD

Order code: Slide length: Duplicating area: Weight:

WITH COMPLIMENTS

| CASTEL-COP-DIGI | 32 cm (12.59“) | 6.5 x 7.5 cm (2.55 x 2.95“) | 210 g (0.46 lbs) NOVOFLEX Präzisionstechnik GmbH Brahmsstrasse 7, D-87700 Memmingen Telephone +49 8331 88 888, Fax +49 8331 47 174 mail@novoflex.de, www.novoflex.de


N

ClassicBall

NOVOFLEX

TRIPOD HEADS _ CLASSICBALL 5 | BALL HEAD CLASSICBALL 5 MC | BALL HEAD CLASSICBALL 5 QP | BALL HEAD

| MINICONNECT

CLASSICBALL 3 | BALL HEAD CLASSICBALL 3 MC | BALL HEAD CLASSICBALL 3 QM | BALL HEAD

| MINICONNECT MR

| Q-PLATE

| Q-MOUNT

_ _ _ _ _ _

_

PRODUCTINFORMATION

The ClassicBall is a world first in ball head design, with: t Three vertical 90° openings for the ball neck t New AFC (advanced friction control) system for precisely repeatable and defined friction preset t No more fumbling for friction, locking and panning knobs t Absolutely no change of ball position during locking, thanks to totally new design of the ball interior

TECHNICAL DATA

Code: Hight: Base diameter: Camera-mount diameter: Weight: Support:

WITH COMPLIMENTS

| CB5 | 115 mm | Ø 70 mm | Ø 60 mm | 860 g | 12 kg

Code: Hight: Base diameter: Camera-mount diameter: Weight: Support:

| CB3 | 85 mm | Ø 60 mm | Ø 45 mm | ca. 450 g | 8 kg NOVOFLEX Präzisionstechnik GmbH Brahmsstrasse 7, D-87700 Memmingen Phone +49 8331 88 888, Fax +49 8331 47 174 mail@novoflex.de, www.novoflex.de


ClassicBall CLASSICBALL

| BALL HEAD

_ _ _ _ _ _

_

THE APPLICATION

One glance at the ClassicBall, with its understated matt titanium finish, and it‘s clear that this is a high-precision instrument made to last. In line with NOVOFLEX‘s well-known product policy, the ClassicBall is an all-metal design incorporating advanced polymer materials. As with other NOVOFLEX products, the ClassicBall was developed and is manufactured entirely at the company‘s plant in Memmingen (precision made in Germany). Completely new, and a world first in ball head design, are three 90° openings to take the ball neck that significantly increase the vertical adjustment range of the head. The camera can now swing smoothly through 180° vertically. Equally important is that having three 90° openings has been achieved with no loss of stability. Working on the ClassicBall 5, NOVOFLEX development engineers aimed first and foremost to meet photographers‘ requirement for a precisely controllable and repeatable friction adjustment (braking) for the ball. The result was the new AFC (advanced friction adjustment). Integrated here for the first time, AFC allows photographers to set the friction on a setting ring in the center of the ball head. In other words, they can set the correct braking rate of the ball even before he attaches camera and lens. This is finally the end of trial and error adjustment. Getting the right setting is now child‘s play, even with weighty telephoto lenses. In contrast to other ball heads of this type, the ClassicBall makes it possible to lock the ball in position without any risk of even a slight shift in position. This feature comes into its own in macro photography where it is essential not to disturb the setting of a shot. As one would expect from a product of this caliber, the ClassicBall provides integrated 360° panning and two camera threads (1/4“ and 3/8“). The ball support is permanently grease-free. All adjusting elements have been optimized for easy operation even under very difficult conditions. Photographers working in very low temperatures, for example, can set and check all functions reliably without removing their gloves. In designing the ClassicBall, NOVOFLEX engineers drew on practical experience and their deep knowledge of the problems encountered by professional photographers in their daily work. The company has gone to great lengths to achieve high stability and excellent resistance to vibration.


D IN O 2-way tilt head

NOVOFLEX

TRIPOD HEADS _ D IN O silver D IN O titan

N

| 2-WAY TILT HEAD | 2-WAY TILT HEAD

| BASICBALL | QUICK-RELEASE SYSTEM | BASICBALL | QUICK-RELEASE SYSTEM

_ _ _ _ _

PRODUCT INFORMATION

With its low weight, sensitive friction brake and integrated 360° panorama adjustment, the D IN O represents another milestone in the development of modern movable tilt heads. It‘s ideal for mounting spotting scope and telescopes – or any type of digital or analog video, film or photo camera. Horizontal and vertical panning are silky-smooth. After a precision stop, the D IN O is fixed firmly with a twist of the control knob. The guide lever makes fast positioning easy. Video filmers and macro specialists, in particular, will be delighted by the fantastic adjustability. The D IN O is used by thousands of birdwatchers. Panning the D IN O vertically by 90° is a quick way to switch a camera from portrait to landscape format. And lenses with a multi-position tripod mount turn this innovative 2-way tilt head into a 3-way tilt head. D IN O is available in either titan or silver finish and is supplied with a detachable guide lever and video pin.

with compliments

TECHNICAL DATA

180/E/10.05/AD

Order code: Dimensions: Weight: Tripod Connection: Camera Connection: Load rating:

| D IN O silber | 70 x 70 x 90 mm | 330 g | 1/4“ or 3/8“ | 1/4“ | 5 kg

| D IN O titan | 70 x 70 x 90 mm | 330 g | 1/4“ or 3/8“ | 1/4“ | 5 kg NOVOFLEX Präzisionstechnik GmbH Brahmsstrasse 7, D-87700 Memmingen Telephone +49 8331 88 888, Fax +49 8331 47 174 mail@novoflex.de, www.novoflex.de


N

EOS-Retro

NOVOFLEX

MACRO ACCESSORY _ EOS-RETRO

| REVERSE ADAPTER FOR CANON EOS

| STEPPING RINGS

_ _ _ _ _ _

_

TOP TIP

For extreme enlarging we recommend the use of the NOVOFLEX BALPRO 1 universal bellows together with the reversing ring for CANON EOS. This combination not only includes an automatic bellows for the CANON EOS, but also lets you use the camera lens in reverse position with full automatic control of the bellows. The image ratio of the EF 1.8/28 mm in reverse position on the BALPRO 1 ranges from 3.6- to 7.2-fold enlargement.

PRODUCT INFORMATION

For owners of CANON EOS wide-angle or zoom lenses, the EOS-RETRO opens up the world of extreme close-up photography with outstanding quality. The EOS-RETRO lets you mount the lens in reverse position on the camera. The ring transfers all control functions. With a CANON EOS 28-105 mm zoom lens in reverse position, you get an image ratio of 1:7 with a focal length of 105 mm from 1:7 to 2.8:1 at 28 mm. This is a wider setting range than is possible with a macro lens. The EOS-RETRO is supplied standard with a 58 mm filter diameter. Stepping rings are available for other filter sizes.

WITH COMPLIMENTS

TECHNICAL DATA

870/E/06.05/AD

Order code: Size: Weight: Maximum extension:

| EOS-RETRO | 75 mm (2.95”) | 160 g (0.35 lbs) | 550 mm (21.65”) NOVOFLEX Präzisionstechnik GmbH Brahmsstrasse 7, D-87700 Memmingen Telephone +49 8331 88 888, Fax +49 8331 47 174 mail@novoflex.de, www.novoflex.de


Flash holding systems FLASH HOLDERS _ FLASH-GRIFF

NOVOFLEX

| FLASH AND HOLD

XX-HALTER

N

| FLASH AND HOLD

| AUTO-FLASH-ART | FLASH UNITS | AUTO-DUO-FLASH | FLASH UNITS

_ _ _ _ _ _

FLASH-GRIFF

XX-HALTER

PRODUCT INFORMATION

FLASH-GRIFF. Mounted on the newly-developed camera base plate, the grip offers a convenient method for positioning one of today’s large flash units either by screwing it directly to the ball head or sliding it into the flash shoe on the tilt head. Flexible flash alignment and a hand strap that lets you keep a firm hold on the whole unit are two of the grip’s outstanding features. The grip can be unscrewed from the base plate and stowed away during transport.

XX-HALTER. This Duo-Flash holder for optimal positioning of two flash units is the outcome of extensive testing and many years’ experience. The Duo-Flash holder does away with earlier compromises between fast handling and compact design. Now positioning of the two flash units is completely flexible and adjustment is lightning fast. The camera base plate is attached to the underside of the camera, the vario system supports two ball heads with flash shoes, and can be rotated and shifted freely. Because a ball head can be mounted virtually anywhere along the rails, a vast number of different flash positions is possible. And the whole system is quick and easy to reconfigure. The flexible design means the Duo-Flash holder can be dismantled very quickly; the resultant small package fits into most camera bags.

WITH COMPLIMENTS

TECHNICAL DATA

750/E/06.05/AD

Order code: Total weight: Dimensions: Length: Base plate:

| FLASH-GRIFF | 450 g ( 0.99 lbs) | Grip Ø 4.0 cm (1.57“) | 13.8 cm (5.43“) | 25 x 4 x 0.8 cm (9.84 x 1.57 x 0.31“)

Order code: Weight: Packing dimensions:

| XX-HALTER | 370 g ( 0.81 lbs) | 36 x 4 x 8 cm (14.17 x 1.57 x 3.14“)

NOVOFLEX Präzisionstechnik GmbH Brahmsstrasse 7, D-87700 Memmingen Telephone +49 8331 88 888, Fax +49 8331 47 174 mail@novoflex.de, www.novoflex.de


Flash holding systems FLASH HOLDER _ UNISET

| FLASH AND HOLD

UNIMARM

| FLASH AND HOLD

| AUTO-DUO-FLASH | FLASH UNITS | AUTO-DUO-FLASH | FLASH UNITS

_ _ _ _ _ _

UNISET

UNIMARM

PRODUCT INFORMATION

UNISET. This flash holding system with sliding rods consists of a rigid camera plate with two jointed rods (horizontal and vertical) and two non-jointed rods. The system is capable of mounting even heavy flash units in any desired position and can also be used to precisely position video lights, microphones and fill-in light panels.

UNIMARM. This flash holding system consists of a rigid camera base plate with two flexible arms that can hold the flash units in any position. A ball joint with a flash shoe is attached at the end of each flexible arm. The arms can be easily adjusted to position the flash units precisely.

TECHNICAL DATA

Order code: Total weight: Base plate: Traverse: Maximum flash distance:

| UNISET | 900 g (1.98 lbs) | 245 x 80 x 40 mm ( 9.64 x 3.14 x 1.57“) | 220 mm each (8.66“) | 560 mm (22.04“)

Order code: Total weight: Base plate: Arm length:

| UNIMARM | 1260 g (2.77 lbs) | 245 x 80 x 40 mm (9.64 x 3.14 x 1.57“) |495 mm each (19.48“)


N

Focusing racks

NOVOFLEX

FOCUSING RACKS _ castel-Q castel-XQ castel-l castel-xl castel-mini

| FOCUSING RACK WITH DOVE-TAIL | FOCUSING RACK PRO WITH DOVE-TAIL | FOCUSING RACK MC | FOCUSING RACK PRO MC | MINI FOCUSING RACK

| q=plate

| castel-cross

| q=plate | miniconnect | castel-cross | miniconnect

_ _ _ _ _

CASTEL-Q  focusing rack PRODUCT INFORMATION

NOVOFLEX focusing racks are indispensable accessories for macro and stereo photography. They can be mounted on any tripod and on the NOVOFLEX MS-REPRO macro reprostand. The CASTEL-Q comes with Arca size dovetail clamping and was designed to fit the NOVOFLEX Q=BASE quick-release system. It can also be mounted on any commercially available tripod head. A second focusing rack converts the CASTEL-Q to a cross rack of exceptional stability. TECHNICAL DATA

Order code: Dimensions: Glider width: Weight: Travel:

| CASTEL-Q | 200 x 100 x 33 mm | 66 mm | 450 g | 125 mm

Camera connector pieces (Q=plates) not included in the scope of delivery. See data sheet Q=BASE or Q=MOUNT for available plates.

Castel-XQ  FOCUSING RACK PRO PRODUCT INFORMATION

The new focusing rack is equipped with the connection from the well-known quick-release system Q (Arca size dovetail clamping). Due to the integrated dovetail connections on top as well as at the bottom it can also be extended to a cross focusing rack when combined with a second rack. Adjustable on two levels, it achieves a total travel of 380 mm, although its basic length is only 256 mm. TECHNICAL DATA

Order code: Dimensions: Glider width: Weight: Travel:

| CASTEL-XQ | 256 x 102 x 60 mm | 66 mm | 900 g | 380 mm

with compliments

410/E/11.08/AD

Camera connector pieces (Q=plates) not included in the scope of delivery. See data sheet Q=BASE or Q=MOUNT for available plates.

NOVOFLEX Präzisionstechnik GmbH Brahmsstraße 7, D-87700 Memmingen Telefon +49 8331 88 888, Fax +49 8331 47 174 mail@novoflex.de, www.novoflex.de


Focusing racks castel-l  focusing rack MC PRODUCT INFORMATION

The CASTEL-L has an integral camera quick-release connection (from the NOVOFLEX MiniConnect system) that allows quick mounting and dismantling of the camera equipment. The focusing rack can be mounted either on a tripod head, or on a Q=BASE or Q=MOUNT quick-release connection. Order code: Dimensions: Slider width: Weight: Travel:

| CASTEL-L | 200 x 100 x 33 mm | 66 mm | 420 g | 140 mm

Tip:

Using the CASTEL-L or CASTEL-Q with the NOVOFLEX Q=BASE quick-release system doubles the available length of travel.

castel-xl  focusing rack PRO MC PRODUCT INFORMATION

Providing absolute stability, the CASTEL-XL is the focusing rack of choice for heavy professional cameras. Adjustable on two levels, it achieves a total travel of 380 mm, although its basic length is only 256 mm. Suitable for all tripod and tilt heads. Order code: Dimensions: Glider width: Weight: Travel:

| CASTEL-XL | 256 x 102 x 60 mm | 70 mm | 900 g | 380 mm

castel-mini  focusing rack PRODUCT INFORMATION

The CASTEL-MINI has a 1/4“ tripod connection. Two fine-position drives give a total travel of 135 mm. The CASTEL-MINI is the ideal tool for all macro photographers who are looking for a focusing rack that combines low weight with highest stability. Order code: Dimensions: Weight: Travel:

| CASTEL-mini | 130 x 80 x 55 mm | 280 g | 135 mm

Note:

CASTEL-L, CASTEL-Q and CASTEL-MINI have special guide bores to take the NOVOFLEX CASTEL-COP-DIGI slide duplicator. Technical data is subject to change without notice


MagicBall BALL HEAD _

N

NOVOFLEX

Magicball | BALL HEAD | GUIDE HANDLE Magicball 50 | BALL HEAD | GUIDE HANDLE Magicball mini | BALL HEAD _ _ _ _ _ _

PRODUCT INFORMATION

The MagicBall ball head series is yet another example of NOVOFLEX‘s outstanding ability to develop innovative and practical accessories. There are three models in the MagicBall series – for different camera configurations with total weight from 5 to 10 kg. The ball heads provide an unbelievable positioning range of 120° in virtually any plane. All three models are easy to handle and compatible with practically any tripod. Part of the secret is the large, grippy point-and-fix handle. The handle is used to position the MagicBall exactly, then a simple twist fixes it firmly in place. On the larger models, designed for heavier equipment, adjustment is made easier by an integrated friction setting. This variable friction setting lets you match the camera weight to the adjusting force. The outstanding design and use of only the finest materials blocks any vibration transfer. The knurled wheel makes for simple and safe camera mounting.

110/E/10.05/AD

with compliments

NOVOFLEX Präzisionstechnik GmbH Brahmsstraße 7, D-87700 Memmingen Telefon +49 8331 88 888, Fax +49 8331 47 174 mail@novoflex.de, www.novoflex.de


MagicBall MAGICBALL – THE BIG ONE Suitable for 35 mm and middle format cameras with big telephoto lenses and professional video cameras up to 10 kg. Integrated friction setting. Design Award Winner 1998. TECHNICAL DATA

Order code: Height: Ball: Length: Base: Support pad: Weight: Load rating:

| MB | 105 mm | Ø 60 mm | 160 mm | 50 mm | 55 x 40 mm | 920 g | 10 kg

MAGICBALL 50 – THE UNIVERSAL ONE Recommended for 35 mm and middle format cameras and camcorders up to 7 kg. Integrated friction setting. TECHNICAL DATA

Order code: Height: Ball: Length: Base: Support pad: Weight: Load rating:

| MB 50 | 90 mm | Ø 50 mm | 150 mm | 42 mm | 52 x 34 mm | 610 g | 7 kg

MAGICBALL MINI – THE SMALL ONE Suitable for camera equipment up to 5 kg. Without friction setting. technical data

Order code: Height: Ball: Length: Base: Support pad: Weight: Load rating:

| MB MINI | 75 mm | Ø 40 mm | 110 mm | 35 mm | 45 x 30 mm | 330 g | 5 kg

GUIDE HANDLE for MAGICBALL AND MAGICBALL 50 Improves handling of the MagicBall and MagicBall 50 when used with big telephoto lenses or professional video cameras. technical data

Order code: Dimension: Length: Weight:

| MB-GRIFF | Ø 30 mm | 100 mm | 220 g


N

Mini tripods

NOVOFLEX

mini tripod _ minipod micropod microStativ Microstariv Q

| mini tripod | mini tripod | micropod | micropod

| TRIPOD LEG EXTENSION SET | Ball 19 | ball 19

| Q=Mount MINI, QPL Slim 25

_ _ _ _ _ _

minipod

micropod

microstativ Q

PRODUCT INFORMATION

Minipod We came up with the Minipod to provide unparalleled flexibility in ground-level photography. The legs are individually adjustable for perfect positioning on uneven or sloping surfaces. Set angle positions of 30°, 60° and 90° for working heights from 40 to 190 mm simplify handling. The leg ends are fitted with large rubberized feet for a steady stance, even on smooth surfaces. The feet also avoid sensitive finishes being scratched. The solid tripod base takes virtually all commercially available tripod heads and camera tilt heads. NOVOFLEX offers a big choice of tilt and ball heads for a very wide range of applications. The Minipod is ideal for macro and table-top photography. It can be used to support cameras, flash units, photography and video lights, light barriers and other accessories up to 10 kg weight. Order code: Dimensions: Maximum height: Weight:

| MINIPOD | 250 x 105 x 40 mm (9.8" x 4.1" x 1.6") | 190 mm (7.5“) | 390 g (0.85 lbs)

Micropod Weighing in at just 50 g, the Micropod is an ideal companion if you‘re out and about. It also scores highly in table-top photography. It‘s right for digital cameras and camcorders, and has also no problems with supporting a heavy SLR camera. It is also perfect for positioning flash lights, video lights, microphones, etc. Together with the NOVOFLEX BALL 19 and 19P, it‘s an item that should be found in any camera bag. The plug-in legs are assembled in a trice for immediate action. Folded together, the tripod turns into a small handle that can be used to stabilize the camera as you carry it. Order code: Maximum heigth: Weight:

| MICROPOD | 70 mm (2.76“) | 50 g (0.11 lbs)

with compliments

The Micropod is also available in 2 special models:

270/E/10.05/AD

Order code: | MICROstativ consisting of Micropod and Ball 19 Order code: | MICROstativ Q consisting of Micropod, Ball 19, Q=MOUNT MINI and QPL Slim 25

NOVOFLEX Präzisionstechnik GmbH Brahmsstraße 7, D-87700 Memmingen Telefon +49 8331 88 888, Fax +49 8331 47 174 mail@novoflex.de, www.novoflex.de


MiniConnect Quick-release connection system _ mC mC-Profi mC-MR mC-Vertikal _

N

NOVOFLEX

| AUTOMATIC QUICK-RELEASE CONNECTION SYSTEM | PROFISET AUTOMATIC QUICK-RELEASE CONNECTION SYSTEM | manual QUICK-RELEASE CONNECTION SYSTEM | ANGLE BRACKET

_ _ _ _ _

_

Miniconnect

Miniconnect MR

PRODUCT INFORMATION

MiniConnect This elegant quick-release connection system offers outstanding stability. It is robust enough to take very heavy cameras and lenses. The ingenious design permits single-handed operation, because the connectors lock automatically on insertion. A dual safety system prevents accidental loosening or detaching. The round connectors are extremely small and have a low profile, so they can be left permanently attached to the tripod connections of cameras or lenses. A range of six connectors for different equipment and applications, plus an angle bracket and a special carrying strap, round off the MiniConnect product range. TECHNICAL DATA

Order code: Dimensions: Weight: Tripod connection:

| MC | 80 x 60 x 18 mm | 140 g | 1/4“ or 3/8“

MiniConnect MR The manual quick-release connection from the MiniConnect series is specially developed for small ball and tilt heads and can be used with any support system. It is recommended for small to mid-sized camera systems. MiniConnect MR is compatible with the connectors and accessories of the MiniConnect quick-release connection system. Technical Data

510/E/10.05/AD

Order code: Dimensions: Weight: Tripod connection:

| MC-MR | h = 20 mm, Ø 53 mm | 100 g | 1/4“ or 3/8“

with compliments

NOVOFLEX Präzisionstechnik GmbH Brahmsstraße 7, D-87700 Memmingen Telefon +49 8331 88 888, Fax +49 8331 47 174 mail@novoflex.de, www.novoflex.de


MiniConnect MiniConnect strap The webbed strap is easy and comfortable to wear. Attach a quick-release connection system to hang around your neck or over your shoulder instead of a conventional camera strap. You can attach any of several cameras to it and quickly transfer the camera to a tripod with no camera strap to get in the way. Another benefit is that the camera hangs with the lens pointing downwards – a safer way to carry than using a conventional strap. You have both hands free to change the film, or modify the settings on a digital camera, and you don‘t need to take the camera off to do it. The camera can be detached from the strap with one quick movement. Order code:

| MC-GURT

MiniConnect Profiset Consisting of a base plate (MC), three 1/4“ connectors (MC 1/4“) and strap (MC-GURT), buying the set is cheaper than buying the items separately. The MC Profiset is for photographers who want the ingenious quick-release connection system for several cameras or lenses. Order code:

| MC-PROFI

MiniConnect MC-VERTICAL angle bracket The MC-VERTICAL angle bracket allows the camera format to be changed from portrait to landscape in just seconds. The camera alignment and settings (eg. focus) remain unchanged. Cameras with a motor drive and/or powerpack handles can also be swivelled in the optical axis. Order code: | MC-VERTIKAL Dimensions: | 165 x 135 mm Weight: | 330 g Connection: | Special 1/4“ connector

MiniConnect connectors Small and round, MC connectors come in six versions. Suitable for: MiniConnect quick-release connection system, MiniConnect MR quick-release connection system, CASTEL-L focusing rack, CASTEL-XL focusing rack.

MiniConnect 1/4“ connector

MiniConnect 3/8“ connector

MiniConnect 1/4“ long connector Extra-long thread (length = 8 mm)

Order code: | MC-1/4 Dimension: | Ø = 25 mm

Order code: | MC-3/8 Dimension: | Ø = 25 mm

Order code:

MiniConnect special 1/4“ connector With extra anti-twist pin, only for metal camera bases or metal lens tripod connections.

MiniConnect special 3/8“ connector With additional anti-twist pin, only for metal camera bases or metal lens tripod connections.

MiniConnect 3/8“ long connector Extra-long thread (length = 8 mm)

Order code: | MCSPECIAL 1/4 Dimension: | Ø = 25 mm Weight: | 18 g

Order code: | MCSPECIAL 3/8 Dimension: | Ø = 25 mm Weight: | 18 g

| MC-1/4-LANG

Order code: LANG

| MC-3/8-


Chest- and shoulder support TRIPOD TECHNOLOGY _ PISTOCK-C

N

NOVOFLEX

| Tripod Technology | with universal plate | Special rapid length adjustment

_ _ _ _ _ _

PRODUCT INFORMATION

The NOVOFLEX PISTOCK-C is a multi-purpose applicable support that can optionally be used as chest- or shoulder support. It is fit with a big bearing surface which is adjustable according to the camera type. Versatile possibilities of adjustability allow an infinite adjustment, depending on body height of the photographer or field of application.

TECHNICAL DATA

Order code: Length: Weigth:

WITH COMPLIMENTS

| PISTOCK-C | 28 cm / 24 cm (11 inch / 9.5 inch) variable | 450 grams (1 lb.)

NOVOFLEX Präzisionstechnik GmbH Brahmsstrasse 7, D-87700 Memmingen Telephone +49 8331 88 888, Fax +49 8331 47 174 mail@novoflex.de, www.novoflex.de


Chest- and shoulder support PISTOCK-C

| Tripod Technology | with universal plate | Special rapid length adjustment

_ _ _ _ _ _

used as shoulder support WITH QUICK RELEASE MiniConnect (MC)

Used as chest support WITH QUICK RELEASE MiniConnect (MC)

(7) Universal plate with 1/4 inch support screw for all 35 mm cameras, telephoto lenses, medium format cameras and video cameras.

_ (3) Clamp screw for length adjustment

(6) Connection bolt for the universal plate (2) Shoulder- or chest support (5) Joint with binding screw

(1) Carrying- and holding belt with snap hook

(4) Clamp screw for adjustment of the chest-/shoulder support

PRODUCT INFORMATION

The belt (1) can be adjusted in its length. The snap hooks can be opened by pressing the notch and drawing back the plastic cover. After loosening the clamp screw (3), the support can be adjusted in its length, too. By turning the clamp screw (4) several times to the left, the support can be adjusted by 90째 to be used either as chest- or shoulder support. Having locked the screw the adjusted position is fixed. Depending on the body height of the photographer respectively the utilisation purpose, the joint can be adjusted as well.

PISTOCK-C WITH QUICK RELEASE Q=MOUNT AND angle bracket QPL-Vertikal

The universal plate can be fixed in such a way that the optimal support for each camera equipment will be guaranteed.

PISTOCK-C WITH QUICK RELEASE Q=MOUNT AND angle bracket QPL-Vertikal

PISTOCK-C WITH QUICK RELEASE Q=MOUNT AND clamping plate QPL 4


Quick release plates Q=Plate

NOVOFLEX

Quick release plates _ Q=PLATE

| quick release plates

N

| Q=System

_ _ _ _ _

_

PRODUCT INFORMATION

NOVOFLEX offers a large variety of clamping plates for the Q=System in different lengths, screw sizes, anti-twist versions, special plates for medium format cameras and many more. The unique safety-pin feature prevents the camera or other attached gear from accidentally slipping out from the quick release. All Q=PLATES are Arca style dovetail compatible. However, the safety pin function can only be used with original NOVOFLEX quick releases. The new grey finished plates, available in lengths 270, 350 and 450 mm feature a double-sided dovetail profile (ideal for stereo and 3D photography). All Q=Plates are designed extremly stable and are manufactured with highest precision.

550/D/05.11/AD

With Compliments

NOVOFLEX Präzisionstechnik GmbH Brahmsstraße 7, D-87700 Memmingen Telefon +49 8331 88 888, Fax +49 8331 47 174 mail@novoflex.de, www.novoflex.de


Quick release plates Q=Plate

TECHNIcal specifications

[1] Standard plate with 1 x 1/4“ screw, 90° offset mountig possible Order code: | QPL1 Size: | 1.7“ x 1.7“ Weight: | 1.4 oz. [2] Standard plate with 1 x 3/8“ screw, 90° offset mountig possible Order code: | QPL1-3/8“ Size: | 1.7“ x 1.7“ Weight: | 1.4 oz. [3] Plate 84 mm, 2 x 1/4“ and 2 x 3/8“ screw Order code: | QPL2 Size: | 3.3“ x 1.7“ Weight: | 2.8 oz. [4] Plate 120 mm, 2x 1/4" and 2 x 3/8" screw Order code: | QPL3 Size: | 4.7“ x 1.7“ Weight: | 4.6 oz. [5]Plate 155 mm, 2x 1/4“ and 2 x 3/8“ screw Order code: | QPL4 Size: | 6.1“ x 1.7“ Weight: | 6 oz. [6] Clamping plate slim 25 with 1 x 1/4“ screw Order code: | QPL Slim 25 Size: | 1.5“ x 1“ Weight: | 0.5 oz. [7] Clamping plate slim 39 with 1 x 1/4“ screw Order code: | QPL Slim 39 Size: | 1.5“ x 1.5“ Weight: | 0.8 oz.

[8] L-bracket with 1 x 1/4“ screw Order code: | QPL-Vertikal Size: | 5.2“ x 5.2“ Weight: | 8.1 oz. [9] Anti-Twist plate 50 mm with 1 x 1/4“ and 1 x 3/8“ screw, 90° offset mounting possible Order code: | QPL-AT1 Size: | 2“ x 1.7“ Weight: | 2 oz. [10] Video plate with special video pin and 1 x 1/4“ screw, 90° offset mountig possible Order code: | QPL-VIDEO Size: | 2“ x 1.7“ Weight: | 2 oz. [11] Anti-Twist plate 70 mm with 1 x 1/4“ and 1 x 3/8“ screw, 90° offset mounting possible Order code: | QPL-AT2 Size: | 2.8“ x 1.7“ Weight: | 2.5 oz.

[15] Panorama clamping plate 24 cm with 1 x 1/4“ screw Order code: | QPL PANORAMA 235 Size: | 9.4“ x 1.7“ Weight: | 7 oz. [16] Clamping plate 270 with double sided dovetail, 2 x 1/4“ screw Order code: | QPL 270 Length: | 10.6“ Weight: | 7.4 oz. [17] Clamping plate 350 with double sided dovetail, 2 x 1/4“ screw Order code: | QPL 350 Length: | 13.8“ Weight: | 9.5 oz. [18] Clamping plate 450 with double sided dovetail, 2 x 1/4“ screw Order code: | QPL 450 Length: | 17.7“ Weight: | 12.3 oz.

[12] Plate for 6x6 medium format cameras, 1 x 1/4“ and 1 x 3/8“ screw Order code: | QPL 6x6 Size: | 2“ x 1.7“ Weight: | 2.5 oz. [13] Clamping plate with cross bubble leveller and 1 x 1/4“ screw Order code: | QPL Leveller Size: | 6.1“ x 1.7“ Weight: | 5.5 oz. [14] Panorama clamping plate 18 cm with 1 x 1/4“ screw Order code: | QPL PANORAMA Size: | 7“ x 1.7“ Weight: | 6.7 oz.

Technical specifications subject to change without notice.


N

Quick releases Q=System

NOVOFLEX

Quick releases _ Q=Base Q=MOUNT Q=MOUNT Mini _ _

| AutomatiC Quick release | Manual Quick release | Manual Quick release

_ _ Q=Base

_

_

Q=Mount

Q=Plate

Q=Mount Mini PRODUCT INFORMATION

With the quick releases of the Q=System cameras can be mounted easily and safely at any tripod or ball head with 1/4“ or 3/8“ thread. The Q=System was designed with special emphasis on easy handling and compact dimensions. The automatic Q=BASE allows locking the camera plate with a simple click. The position can then be adjusted individually. A simple turn of the silver colored ring locks the plate safely. Designed for even heaviest equipment. There is also a safety pin as an extra safeguard to prevent the camera plate from sliding out inadvertently. A large variety of camera plates (Q=Plates) is available in almost any size to support different types of photo and video equipment. The Q=System is also compatible with plates of many third-party manufacturers (Arca style dovetail). However, the safety pin function is only available while using original NOVOFLEX Q=Plates. The manual quick release Q=MOUNT complements the Q=System. The round shaped design is a perfect combination of form and function. Extremly fast clamping is guaranteed by the high precise double thread locking mechanism. A simple turn and the plate is locked in place. Like the Q=BASE, also the Q=MOUNT features a safety pin to prevent the camera plate from sliding out accidentally, if the locking knob is not turned completely. The Q=MOUNT MINI is equipped with the same features and advantages as the Q=MOUNT. Its slim design fits perfectly i.e. bodies of cameras without mirror or point-and-shoot cameras. Highly recommended for use with QPL Slim mounting plates. TECHNICAL SPECIFICATIONS

550/E/04.11/AD

Order code: Dimensions: Height: Weight: Connection:

| Q=Base | Ø 78 mm (3") | 22 mm (0.87") | 265 g (0.63 lbs) | 1/4" and 3/8"

With compliments

Order code: Dimensions: Height: Weight: Connection:

| Q=MOUNT | Ø 60 mm (2.36") | 16 mm (0.62") | 100 g (0.22 lbs) | 1/4" bzw. 3/8"

Order code: Size: Weight: Connection:

| Q=MOUNT Mini | 75x25x15 mm (3×1×0.6 in.) | 55 g (2 oz.) | 1/4" NOVOFLEX Präzisionstechnik GmbH Brahmsstraße 7, D-87700 Memmingen Telefon +49 8331 88 888, Fax +49 8331 47 174 mail@novoflex.de, www.novoflex.de


Quick releases Q=System Quick releases _ Special Devices _ _ _ _ _ Q=Mount Mini D Q=Mount D for parallel mounting

_

Q=Mount DC for cross mounting (90°)

PRODUCT INFORMATION

The NOVOFLEX Q=System is completed by 3 quick release bases with double sided clamping. The Q=MOUNT D and Q=MOUNT DC are two double-sided quick-release bases that facilitate optimal adjustments of the camera. The direction and the clamping of the Q=MOUNT D are parallel to the holder, whereas the direction and the clamping on the Q=MOUNT DC are arranged at an angle of 90° to the holder. All 3 quick release devices are optimized for use on the Multi-Media-Rig System (MMR), but in many cases they can also be combined usefully with the rail system from NOVOFLEX.

TECHNICAL SPECIFICATIONS

Order code: Weight: Size: Connections:

| Q=Mount Mini D | 70 g (2.5 oz.) | 90 x 25 x 20 mm (3.5 × 1 × 0.8 in.) | Q=System

Technical specifications are subject to change without notice.

Order code: Weight: Size: Connections:

| Q=Mount D | 120 g (0.3 lbs) | 90 x 60 x 20 mm (3.5 x 2.4 x 0.8 in.) | Q=System

Order code: Weight: Size: Connections:

| Q=Mount DC | 120 g (o.3 lbs) | 75 x 75 x 20 mm (3 x 3 x 0.8 in.) | Q=System


Rod set SYSTEM ACCESSORIES _ STASET _

N

NOVOFLEX

| ROD SYSTEM

_ _ _ _ _

_

The items from this set can be linked and joined in any number of ways and added to as required within the system. They enable you to set up versatile support structures both in the studio and the field.

TECHNISCHE DATEN

820/E/04.11/AD

Order code: Weight:

WITH COMPLIMENTS

| STASET | 370 g (0.81 lbs)

NOVOFLEX Präzisionstechnik GmbH Brahmsstrasse 7, D-87700 Memmingen Telephone +49 8331 88 888, Fax +49 8331 47 174 mail@novoflex.de, www.novoflex.de


Rod set APPLICATION EXAMPLES

ACCESSORIES

The STASET rod set consists of the following items that can be added to as required: Rod 30 cm (2 pcs) Metal rod, 1/4“ tapped hole at one end, 1/4“ threaded stud at the other end. Order code: | STA 30 Rod 15 cm (1 pc) Metal rod, 1/4“ tapped hole at one end, 1/4“ threaded stud at the other end. Order code: | STA 15 Corner coupling (1 pc) Joins two rods at an angle of 90°. Order code: | MUFFE

Large clip

Connecting screw (1 pc) For connecting two 1/4“ threaded studs. Order code: | VBSCHRAUBE Ball head with flash shoe (1 pc) Small but very sturdy flash tilt head with removable flash shoe. Also suitable for large plug-in system flashes. Order code: | M-NEIGER

These items can also be supplied singly to upgrade the set.

Holding clip (1 pc) Strong clip with 1/4“ tapped hole. Order code: | KLAMMER

Large clip (for fill-in light panels) Clip with a strong spring for fixing plane objects, with 1/4“ tapped hole. Order code: | KLEMME

Specimen holder clip (1 pc) Clip for gentle fixing of sensitive materials, with 1/4“ tapped hole. Order code: | PF-KLAMMER

Ground spike (1 pc) Solid spike with 1/4“ threaded stud for fixing in the ground. Order code: | NAGEL

Additional accessories for the STASET rod set (not included in basic set):


N

Survival-Kit

NOVOFLEX

PHOTO-SURVIVAL-KIT _

_ _ _ _ _ _ Photo-Survival-Kit The Photo Survival Kit (KIT) allows you to solve nearly all mounting tasks with one small kit. It consists of various components: t Tripod head, load capacity up to 3 kg (6.6 lbs) t Mini tripod t Suction cup t Ground spike

t Universal clamp, clamping width 42 mm (1.7”) t Plastic-clamp t Metal rod 15 cm (5.9“) t Bag

Whether needing to clamp or screw the item into something or positioning it securely on firm ground or to mount it on smooth surfaces, the Photo Survival Kit (KIT) offers the suitable tools, in order to position your camera surely and firmly. Fast and uncomplicated, this universal set can be used, so when taking along a large tripod is too unwieldy, too heavy or simply not planned as e.g. when going on a biking or trekking-trip. Supplied in a bag. APPLICATION EXAMPLE

WITH COMPLIMENTS

TECHNICAL DATA

Order code: | KIT Dimensions Bag: | 265 mm x 190 mm x 30 mm (10.4“ x 7.5“ x 1.4“) Weight: | 600 g (1.3 lbs)

NOVOFLEX Präzisionstechnik GmbH Brahmsstrasse 7, D-87700 Memmingen Telephone +49 8331 88 888, Fax +49 8331 47 174 mail@novoflex.de, www.novoflex.de


N

Tilt/Shift bellows

NOVOFLEX

TILT/SHIFT BELLOWS _ BALPRO T/S

| TILT/SHIFT BELLOWS

| Camera adapter | LENS adapter | Schneider LENS HEAD

_ _ _ _ _ _

_ PRODUCT INFORMATION

The tilt/shift bellows rounds out NOVOFLEX‘s comprehensive offering of high-end bellows. Following on the NOVOFLEX BALPRO 1 universal bellows, the BALPRO T/S provides a perfect tilt/shift bellows system for cameras up to a 6 x 7 cm format. The tilt and shift functions are just what professional photographers have been waiting for. The combination options are practically inexhaustible: virtually all 35 mm and medium-format lenses as well as special lenses can be used with nearly all 35 mm and many medium format cameras up to 6 x 7 cm. Canon EOS systems even support full transfer of all data between camera and original lens via a special accessory. High-precision controls, an attractive design and high-calibre manufacturing make this the perfect macro add-on. The NOVOFLEX BALPRO T/S provides a tilt and shift function at the front and back of the bellows; the standard adjustment is 26 mm horizontally, the rotation 15° left and 15° right. In normal shooting position, you can take ideal photographs according to Scheimpflug. Turn the bellows by 90° to portrait format to compensate for converging lines. NOVOFLEX offers two special lens heads (APO DIGITAR) by Schneider in Bad Kreuznach, which are optimized for digital cameras. These lens heads are flush-mounted permanently on the bellows. 2 focal lengths are available:

SCHNEIDER Apo-Digitar 4,0/80 mm SCHNEIDER Apo-Digitar 5,6/100 mm

Order code: | PRO-APO-DIGI 80 Order code: | PRO-APO-DIGI 100

The lenses allow adjustment to infinity with all cameras. 35mm SLR cameras require the 80 mm lens head, the Mamiya 645 the 100 mm lens head. The setting for 35 mm cameras ranges from infinity to 1.8x enlargement.

TECHNICAL specifications

Order code: Length: Width: Heigth: Weight:

WITH COMPLIMENTS

| BALPRO T/S | 200 mm (7.87”) | 120 mm (4.72“) | 185 mm (7.28”) | 975 g (2.14 lbs) NOVOFLEX Präzisionstechnik GmbH Brahmsstrasse 7, D-87700 Memmingen Telephone +49 8331 88 888, Fax +49 8331 47 174 mail@novoflex.de, www.novoflex.de


Tilt/Shift bellows ACCESSORIES

35mm Lens

BALPRO 1 – BALPRO T/S

Adapter

CANON EOS * | * Canon FD | LEICAN and Contax/Yashica |LEICONT and C-Mount | LEICE and LEICA-thread | PROLEI Leica-R | LEI-F and Leica-M | LEI-M and M 42 | LEICO and Mikroskop-Objektive | LEIMIK and Minolta MD | LEIMIN and Nikon AI, AF | LEINIK and Nikon G ** | LEINIK NT and Olympus OM | LEIOM and Pentax | LEIPENT and 6x6 Lens

6x6 MF Camera

BALPRO 1 – Adapter BALPRO T/S APRO oder PROshift+ APRO oder PROshift+ APRO oder PROshift+ APRO oder PROshift+ APRO oder PROshift+ APRO oder PROshift+ APRO oder PROshift+ APRO oder PROshift+ APRO oder PROshift+ APRO oder PROshift+ APRO oder PROshift+ APRO oder PROshift+ APRO oder PROshift+ APRO oder PROshift+ APRO oder PROshift+

BALPRO 1 – Adapter BALPRO T/S

CONTAX 645 EXAKTA 66 HASSELBLAD 2000/205 MAMIYA 645 PENTAX 645 PENTAX 67

| CONTPRO | EXPRO | HAPRO | MAMPRO | TAXPRO | PENTPRO

| PROEX | PROHA | PROMAM | PROTAX | PROPENT

Adapter for Baluni bellows rings | UNIPRO Shift-Adapter | PROshift+

CONNECTIONS FOR BALPRO 1 AND BALPRO T/S

Canon EOS * | CANA-AF and Canon FD | CANA and Contax/yashica |CONTA and FOUR THIRDS | OMA-DIGI and Leica-R | LEA-R and M 42 | COA and MICRO FOUR THIRDS | MFTA and Minolta | MINA and Minolta-AF / SONy α | MINA-AF and Nikon | NIKA and Olympus OM | OMA and Pentax, Sigma | PENTA and Rollei SL 35 | ROLA and SAMSUNG NX | NXA and SONY NEX | NEXA and

PROLEI PROLEI PROLEI PROLEI PROLEI PROLEI PROLEI PROLEI PROLEI

BALPRO 1 – Adapter BALPRO T/S

EXAKTA 66 HASSELBLAD 2000/205 MAMIYA 645 PENTAX 645 PENTAX 67

35mm SLR Camera

PROLEI PROLEI PROLEI

* To get an automatic bellow for Canon EOS you need the following combination to connect: | EOS-RETRO | EOS/PRO | PRO/EOS ** adapter with stop-down function

NOVOFLEX offers two special lens heads (APO DIGITAR) by Schneider in Bad Kreuznach for the BALPRO 1 bellows, which are optimized for digital cameras. These lens heads are flush-mounted permanently on the bellows. 2 focal lengths are available: SCHNEIDER Apo-Digitar 4,0/80 mm Order code: | PRO-APO-DIGI 80 SCHNEIDER Apo-Digitar 5,6/100 mm Order code: | PRO-APO-DIGI 100 The lenses allow adjustment to infinity with all cameras. 35mm SLR cameras require the 80 mm lens head, the Mamiya 645 the 100 mm lens head. The setting for 35 mm cameras ranges from infinity to 1.8x enlargement.


N

Uniklem

NOVOFLEX

MINI TRIPOD _ unikleM unikleM 26 unikleM 42 _

| UNIVERSAL CLAMPS | UNIVERSAL CLAMPS | UNIVERSAL CLAMPS

|magicball |FORKED-JOINT |ball 19/P

|neiger 19/P

|ball 19/P

|neiger 19/P

_ _ _ _ _

_

product information

NOVOFLEX universal clamps are as helpful as a third hand and the ideal accessories for studio and nature photography. Use them to fix items safely and securely to things like panels, doors, tables, windows, pipes, branches, fences, ladders or tripod legs. Use them when you have no tripod to hand or when space is too tight to use one. The clamps also make excellent car window tripods. All three clamps provide a screw-on fitting, offset at 90°, for ball heads, cameras, lights, flash units and accessories. They can be attached to bikes, canoes or sailing boats, making them indispensable in sports photography. The universal clamps do an equally good job in non-photographic situations. For example, two clamps combined with a Ball 19 can be used to position and fix light barriers or torches. In product photography, a MicroPod, Ball 19 and universal clamp combine to form a flexible helper for positioning light panels, plates or objects.

230/E/10.05/AD

with compliments

NOVOFLEX Präzisionstechnik GmbH Brahmsstraße 7, D-87700 Memmingen Telefon +49 8331 88 888, Fax +49 8331 47 174 mail@novoflex.de, www.novoflex.de


Uniklem APPLICATION EXAMPLES

Uniklem The large universal clamp has two 1/4“ camera studs offset by 90° and can be used for large and heavy ball heads. The rubber lining on the inside and underside of the clamp makes for gentle yet secure mounting on car windows. There‘s an extra 1/4“ hole for attaching a support like a monopod (BB-Stock). The two knurled wheels offset by 90° make for fast mounting of cameras or ball heads.

Uniklem 42 The mid-sized universal clamp has maximum grip of 42 mm. It has two 1/4“ tapped holes offset by 90° and a threaded stud.

Uniklem 26 With a maximum grip of 26 mm, the small universal clamp has many different uses, eg, on a small ball head on a tripod for ground-level photography. It has two 1/4“ tapped holes offset by 90° and a threaded stud.

technical data

Order code: | UNIKLEM Dimensions: | 105 x 75 x 65 mm Weight: | 535 g Max. grip: | 62 mm Camera connection: | 2 x 1/4“

| UNIKLEM 42 | 74 x 44 x 30 mm | 170 g | 42 mm | 2 x 1/4“

| UNIKLEM 26 | 58 x 40 x 30 mm | 145 g | 26 mm | 2 x 1/4“


N

Useful accessories

NOVOFLEX

FORKED JOINT BEAN BAG CHECK CARDS _ _ _ _

_

FORKED JOINT The GAKO offers additional support when using long lenses, spotting scopes, etc. With the base rigidly attached to a tripod, the fork permits a full 360° turn, allowing the user to continuously follow moving objects without sacrificing the overall stability of the system. TECHNICAL DATA

Order code: Height: Fork width: Weight:

| GAKO | 110 mm / 4.33” | 125 mm / 4.92” | 210 g / 0.46 lbs

BEAN BAG This leather bag can be filled with dried beans and as such is an ideal work platform for macro photography. It is capable of suppressing vibrations, making it a useful additional support for telephoto lenses, bellows, etc. TECHNICAL DATA

Order code: Dimension: Weight, w/o filling: Volume: Delivery w/o filling

| TELESACK | approx. 200 ×200 mm | 60 g / 2.1 oz | 800 g dried beans

CHECK CARD The flexible check card, made of a special polymer, has an antireflection coating on both sides: one side white, the other grey. The grey side serves as reference area for exposure metering while the white side enables correct white balance that is so important in digital photography. Handling couldn’t be easier. The camera takes a light reading of either side of the check card to perform an exposure measurement or white balance and, hey presto, the camera is set optimally for the prevailing light conditions to guarantee perfect shots. The Novoflex ZEBRA check card is a must-have for every quality-conscious photographer, regardless of the medium used to capture images. TECHNICAL DATA

Order code: Dimensions:

| ZEBRA | 20 × 15 cm (7.9 × 5.9 in)

Order code: Dimensions:

| ZEBRA XL | 21 × 30 cm (8.3 × 11.8 in)

WITH COMPLIMENTS

NOVOFLEX Präzisionstechnik GmbH Brahmsstrasse 7, 87700 Memmingen Germany phone +49 8331 88 888, fax +49 8331 47 174 mail@novoflex.de, www.novoflex.com


N

Wraps

NOVOFLEX

STRECH WRAPS _ BLUEWRAP _

| CAMERA AND LENS PROTECTION

_ _ _ _ _

_

PRODUCT INFORMATION

A popular series of innovative wraps made of blue neopren, a highly elastic material (up to 30%) for optimal wrapping of cameras and lenses. High-quality velcro fasteners over the full overlap. These wraps are highly recommended as reliable protection for your valuable equipment. Colour: outside: light blue, inside: dark blue. Available in four sizes.

TECHNICAL DATA

Wrap size: S Order code: Size: Ideal for:

Wrap size: M Order code: Size: Ideal for:

WITH COMPLIMENTS

| BLUEWRAP S | 20 x 20 cm | Small cameras, | cell phones, accessories

| BLUEWRAP M | 28x28 cm | SLR bodies and small lenses, | flash units, small camcorders

Wrap size: L Order code: Size: Ideal for:

Wrap size: XL Order code: Size: Ideal for:

| BLUEWRAP L | 38x38 cm | Telephoto lenses, cameras with | small lenses, camcorders

| BLUEWRAP XL | 48x48 cm | Cameras with large telephoto lenses NOVOFLEX Präzisionstechnik GmbH Brahmsstrasse 7, D-87700 Memmingen Telephone +49 8331 88 888, Fax +49 8331 47 174 mail@novoflex.de, www.novoflex.de


QuadroPod

The new Camera Support System of the fourth dimension Das neue Stativsystem der vierten Dimension


Die Köpfe / The Bases

QuadroPod Variabel QP V QuadroPod variable QP V

QuadroPod mit Mittelsäule QP C QuadroPod with center column QP C

QuadroPod Basic QP B QuadroPod Basic QP B

Die StativBeine / The Legs

QuadroLeg, Carbon, 3 Segmente QuadroLeg, carbon, 3 segments QLEG C2830

QuadroLeg, Aluminium, 3 Segmente QuadroLeg, aluminum, 3 segments QLEG A2830

QuadroLeg, Wanderstock QuadroLeg, walking stick QLEG A1830 Walk

QuadroLeg, Mini QuadroLeg, mini QLEG A1010 Mini

4 St. QuadroLeg, Carbon, 3 Segmente 4 pcs. QuadroLeg, carbon, 3 segments QLEG C2830 SET

4 St. QuadroLeg, Aluminium, 3 Segmente 4 pcs. QuadroLeg, aluminum, 3 segments QLEG A2830 SET

4 St. QuadroLeg, Wanderstock 4 pcs. QuadroLeg, walking stick QLEG A1830 Walk SET

4 St. QuadroLeg, Mini 4 pcs. QuadroLeg, mini QLEG A1010 Mini SET

QuadroLeg, Carbon, 4 Segmente QuadroLeg, carbon, 4 segments QLEG C2840

QuadroLeg, Aluminium, 4 Segmente QuadroLeg, aluminum, 4 segments QLEG A2840

4 St. QuadroLeg, Carbon, 4 Segmente 4 pcs. QuadroLeg, carbon, 4 segments QLEG C2840 SET

4 St. QuadroLeg, Aluminium, 4 Segmente 4 pcs. QuadroLeg, aluminum, 4segments QLEG A2840 SET


QuadroPod System ®

QP B Q LEG A2840 SET

QP C Q LEG A2840 SET CB 3

QP B 2 Q LEG C2830 2 Q LEG A1010 Mini

QP C Q LEG A2840 SET ClassicBall CB 3 ( Repro-Stellung / Repro position ) QP B Q LEG A1010 Mini SET

QP V Q LEG A2830 SET

QP V 3 Q LEG A2830

QP B Q LEG A1830 Walk SET


QuadroPod System ®

Zubehör Diese Broschüre hilft Ihnen, das QuadroPod genau nach den individuellen Anforderungen zusammenzustellen. This brochure helps you to select the proper QuadroPod accessories depending on the individual demands.

Monopod

1/4 “ Verbindungsstück 1/4 “ connector QP RED 1/4 “

Große Klemme Big Clamp KLEMME

Halteklammer Mini Clamp KLAMMER

Klemmstativ 42 mm Spannbreite Clamp mount 1.65 “ UNIKLEM 42

Kugelneiger mit Auflageteller Small ball head with plate BALL 19

Kugelneiger mit Blitzschuh Small ball head with flash-shoe NEIGER 19

Saugstativ Suction pod SP

Saugstativ + BALL 19 Suction pod + BALL 19 SP STATIV

Verbindungsknopf f. QLEG Fuß M 10 / 1/4 “ Connector for QLEG bottom M 10 / 1/4 “ QP RED M 10

Kurzer flexibler Arm 26 cm short flexible arm 10.2 “ ARM-K

Einbein-Stativaufsatz für QLEG Monopod plate for QLEG QP MONO

Reprostange für QuadroPod 15 cm Repro rod for QuadroPod 5.9“ MS-REPRO-VL

Aufbaubeispiel / Example: QLEG C2840 QP MONO BALL 30

Stange 15 cm oder 30 cm Extension rod 5.9 “ oder 11.8 “ STA 15 | STA 30

Flexibler Arm 45 cm flexible arm 17.7 “ ARM


QP B 2 QP RED 1/4“ 2 SP STATIV 2 STA 15 2 BALL 19 2 UNIKLEM 42

QP B 2 Q LEG C2840 2 STA 30 2 BALL 19 2 UNIKLEM 42 MagicBall MB 50

QP B Q LEG A1010 Mini SET ClassicBall CB 5 CASTEL-Q Q = PLATE QPL 1

QP B 2 Q LEG C2830 2 STA 15 2 BALL 19 2 UNIKLEM 42 ClassicBall CB 5

QP B Q LEG A2840 SET STA 30 + BALL 19 + KLAMMER ARM + NEIGER 19 ARM + BALL 19 + KLEMME MagicBall MB 50

QP B QLEG C2840 SET QP RED M 10 BALL 19 UNIKLEM 42


QuadroPod

® ®

Technische Angaben / Technical data

Order Code

| Arbeitshöhen | | working heights |

Gewicht weight

QuadroPod® Basic (QP B) mit Stativbeinen „Mini“ QuadroPod® Basic (QP B) with legs „Mini“

|

1080 g

|

2.8’’ – 10.2‘’

|

2.4 lbs

QuadroPod® Basic (QP B) mit Stativbeinen Alu 3 Segmente QuadroPod® Basic (QP B) with legs aluminum 3 segments

|

10 – 155 cm |

2780 g

|

3.9’’ – 61’’ |

6.1 lbs

QuadroPod® Basic (QP B) mit Stativbeinen Alu 4 Segmente QuadroPod® Basic (QP B) with legs aluminium 4 segments

|

10 – 155 cm |

2900 g

|

3.9’’ – 61’’ |

6.4 lbs

QuadroPod® Basic (QP B) mit Stativbeinen Carbon 3 Segmente QuadroPod® Basic (QP B) with legs carbon 3 segments

|

10 – 155 cm |

2460 g

|

3.9’’ – 61’’ |

5.4 lbs

QuadroPod® Basic (QP B) mit Stativbeinen Carbon 4 Segmente QuadroPod® Basic (QP B) with legs carbon 4 segments

|

10 – 155 cm |

2560 g

|

3.9’’ – 61’’ |

5.7 lbs

7 – 26 cm |

Bezeichnung / Description

1. Stativbasen / bases QP B

QuadroPod Basic 860 g / 1.9 lbs

QP C

QuadroPod Basic mit Mittelsäule / with centre column 1060 g / 2.3 lbs

QP V

QuadroPod Variabel / Variable 1080 g / 2.4 lbs

2. Stativbeine / legs

Bei der Version mit Mittelsäule (QP C) erhöht sich die maximale Arbeitshöhe um 27 cm auf 182 cm, das Gewicht um jeweils 200 g. When using the version with centre column (QP C), the maximum working height is increased 10.6” to 71.6“, the weight of each tripod is 0.44 lbs more then. Bei der Version „Variabel“ (QP V) erhöht sich das Gewicht um jeweils 150 g. With the version ‚variable’ (QP V) the weight of each QuadroPod is increased 0.33 lbs.

QuadroPod® ist ein eingetragenes Markenzeichen der NOVOFLEX Präzisionstechnik GmbH. QuadroPod ® is registered as a trademark by NOVOFLEX Präzisionstechnik GmbH.

Q LEG A 2830

QuadroLeg Aluminium 3 Segmente 480 g / 62 - 156 cm 1.1 lbs / 24.4“ - 61.4“

Q LEG A 2840

QuadroLeg Aluminium 4 Segmente 510 g / 53,5 - 154 cm 1.2 lbs / 21.1“ - 60.6“

Q LEG C 2830

QuadroLeg Carbon 3 Segmente 400 g / 62 - 156 cm 0.9 lbs / 24.4“ - 61.4“

Q LEG C 2840

QuadroLeg Carbon 4 Segmente 425 g / 53,3 - 154 cm 1.0 lbs / 21.1“ - 60.6“

Q LEG A 1010 Mini

QuadroLeg Mini 55 g / 20 cm 0.12 lbs / 7.9“

Q LEG A 1830 Walk

QuadroLeg Wanderstock / walking sticks 270 g / 65 - 145 cm 0.6 lbs / 25.6“ - 57.1“

NOVOFLEX Präzisionstechnik GmbH Brahmsstraße 7 87700 Memmingen Germany phone +49 8331 88 888 fax +49 8331 47 174 mail@novoflex.de www.novoflex.de


N

PANORAMA

NOVOFLEX

VR-System II VR-System 6/8 VR-System PRO II

Panorama (Greek) the panorama, unbroken view of an entire surrounding area.

Create images beyond the limits of vision or format! Start shooting at the point where the scene begins and finish where the scene ends or just r­ eproduce a complete space around you! ­Perspective limits, which once were set by the technology of your ­camera or your lenses, no longer ­exist – now it is your challenge as a photographer!

NOVOFLEX Präzisionstechnik GmbH, Brahmsstraße 7 87700 Memmingen Germany phone +49 8331 88 888 fax +49 8331 47 174 mail@novoflex.de www.novoflex.de Panorama photography: Jan Röpenack


Know-how

Entrance pupil = turning point

Toolbox: Novoflex Panorama VR System II, Canon EOS 40D with EF-17-40/4 USM at 40 mm, cylindrical projection, horizontal field of view approx. 120°

With the stitching technique, several pictures are taken one after another, with the camera being rotated around a specific angle each time. Then, all pictures are merged together with a stitching software, e.g. Panorama Studio, into a complete panoramic image.

Why do I need a panorama head? (1)

The panorama head enables the rotation of the system around the centre of the entrance pupil (1) of the lens, also called the “nodal point” or “optical centre”. By doing this, shifting of the foreground in relation to the background is avoided which is of vital importance for the completion of the individual images. Only by rotating around the nodal point the stitching software can work accurately, which guarantees optimal results.

Wrong

Right NOVOFLEX ClassicBall 5 (not included in the scope of delivery)

How to locate the entrance pupil?

Turn to the right without panorama head The foreground (flower) moves to the left towards the background (mountain). This will cause problems when assembling the panorama. Turn to the right with panorama head The foreground (flower) stays properly positioned with the background (mountain). This is the requirement for accurate stitching of the panorama.

Quite simple - by trial and error! To each Novoflex panorama head a detailed operating manual is attached. We recommend that you note the values you have found for each lens for later shooting. Exact scales on the plates and the focusing rack guarantee quick and efficient adjustment of the panorama head before shooting.

Advice:

With wide-angle lenses, the entrance pupil is usually located some millimetres behind the front lens towards the camera. With normal or tele lenses, the entrance pupil moves backwards as the focal length increases.


The Classic: VR-System II

Toolbox: Novoflex Panorama VR System II, CANON EOS 40D with EF-S 17-85/4-5.6 IS USM at 17 mm, 9 images, cylindrical projection, horizontal field of view 360°.

Application:

Suitable for single row cylinderical or flat panoramas. ­Depending on camera and lenses, field of view up to 360° horizontally and 120° vertically are possible. Recommended lenses: Wide-angle lenses with minimum 10 mm focal distance, standard zooms up to tele lenses up to 135 mm focal length.

New in release II:

The panorama plate is now equipped with the Q dove-tail clamp. The system is easily seperated into several pieces for transport and the focusing rack is ready for other photographic tasks.

Advantages:

• Simple, handy system • The individual parts can be used for other tasks as well • All-in-one solution: Apart from the hardware, the ­stitching software PanoramaStudio is also included (unlimited full version).

NOVOFLEX ClassicBall 3 (not included in the scope of delivery)

For whom?

The new panorama VR-System II was developed for the photographer, who prefers the classic, single row cylindrical or flat panorama and who appreciates the simple and handy design of the system. It is of special interest for nature photographers doing panoramic shooting as well as macro and landscape photography, using the focusing rack and L bracket for other tasks, too.

Advice:

We recommend to keep the constancy of aperture, exposure time, white balance and focus during the whole shooting.


The Specialist: VR-System 6/8 Toolbox: Cubic reproduction of a panorama with 360° x 180° field of view. Novoflex Panorama VR System 6/8, CANON EOS 450D with Sigma 8 / 3.5 Fisheye, 6 images.

Details:

Advice:

To avoid lens flares if you want to include the sun in the panorama: Center the first image as precisely as possible directly into the sun. The sun should not appear again in the next images. Always use a lens hood! A low sun position is very helpful if you are taking pictures within a horizontally aligned row.

The upper panorama base slides in the guide rail of the L-bracket, making additional adjustments of the base ­unnecessary when changing the height. Both bases are equipped with click-stops and include a space-saving built-in spirit-level. The locking screws are removable if needed.

Brand-new:

NOVOFLEX ClassicBall 3 (not included in the scope of delivery)

For whom?

The Panorama VR-System 6/8 is the solution for photographers specialised in spherical panoramas for internet applications, virtual tours etc. The utilisation of a fisheye lens reduces the number of required images for a complete spherical panorama (360° x 180°) to three to eight images (depending on the focal distance and the crop factor). Thus, a high-quality result can be achieved quickly and efficiently.

Optimised for fisheye lenses the new VR-System 6/8 ­enables horizontal and vertical rotation around the nodal point of the lens with two click-stop-panorama bases. ­Increments of 45° and 60° each, as well as stepless rotation can be set up. If the images are taken at every ­second click-stop, additional increments of 90° and 120° are possible. The system is sized to allow a complete ­vertical rotation of the camera. Each panning base is construced very small and equipped with an integrated spirit-level, so it doesn´t intrude into the picture. Thanks to the milled-out portion of the L-bracket the spirit-level can be seen from above. The front locking screw can be removed and is only needed in case of stepless adjustment. Due to its size and stability of the head a professional D-SLR camera can be used.


The professional allrounder: VR-System PRO II

Toolbox: Tele panorama Novoflex VR-System PRO II, 10° steps (increment selector at position 36), vertical downtilt of 10°, CANON EOS 5D with EF 135/2.0 L USM, 17 images, 110MP.

Application:

The VR-System PRO II enables the parallax-free, horizontal and vertical pivoting around the nodal point of the lens. It is designed for multi-row panoramas in perspective-­corrected flat or spherical projection. Due to the lower p­ anorama base that can be moved in eight adjustable increments, ­classic single-row cylinder panoramas can easily be done as well. Comfort, stability and precision are the main features of this professional panoramic head.

New in release II:

The upper panorama base is now equipped with click-stops for two selectable increments (45° and 60°). The L-bracket was enlarged and stabilised. The upper clamping plate was also lenghtened and includes a movable anti-twist camera stop.

For whom?

The Panorama VR-System PRO II is the perfect solution for ­professional photographers dealing with all facets of ­panoramic photography. The VR-System PRO II masters all varieties from spherical panorama, perspective-corrected flat panoramas or classic cylindrical panoramas, even when heavy professional DSLR equipment is used. NOVOFLEX ClassicBall 5 (not included in the scope of delivery)

Advice:

Use a remote-control release and the mirror-up ­exposure or LiveView of your camera!


Example 1

Spherical panorama without fisheye: 16 images in 3 layers with a „normal“ 17 mm wide-angle lens and a full-format camera create a cubical, respectively spherical p­ anorama covering the complete space (360° x 180°) in enormous resolution.

Example 2

There is an easy panoramic solution for the problem of ­“convergent lines in the field of architectural photography“. Simulate a digital shift lens, e.g. as in this case with a 19 mm focal length by using software! Due to the multiple individual images you get resolutions that are higher than those of digital backs.

Toolbox: 100 % corrected lines. CANON EOS 5D with 40 mm lens, 60 Megapixel, software PTGui.

Single frame without panorama technique from the same position. CANON EOS 5 D with 19 mm lens, 12.8 MPixel.


Types of projection Cylindrical projection (ideal for wide field of view)

On the right photo you see the most common projection type, the cylindrical projection. The advantage here is that you can also create panoramas with a large horizontal field of view up to 360°. Imagine yourself standing in the centre of a cylinder looking at the surface from inside. Reproducing a cylindrical panorama on a flat surface, e.g. as a print, horizontal lines, except the horizon itself, will appear curved and even more so the further they are away from the horizon. With wider fields of view this is clearly visible – refer to the p­ hoto of the Brandenburger Tor.

Cylindrical projection (200°, horizontal field of view, curved lines)

Flat projection (The habitual perspective)

In the case of smaller field of views the alternative is flat projection, where bending of lines is avoided. In this type of reproduction a classic wide-angle or super wide-angle on a “normal“ camera is digitally simulated. In case of an extreme wide field of view, however, distortions of objects at the image borders show the socalled “super wide-angle effect“. This is not a fault of the lens, but reflects the natural reproduction with a very wide optic. With flat projections only a picture perspective of less than 180° can be reproduced. The reason is that on flat surfaces only objects can be reproduced that are in front, but not that are positioned behind or b­ eside the camera can be captured.

Flat projection (140°, horizontal field of view, straight lines, wide-angle distortion at the picture border)

Spherical projection For the whole space!

For panoramas that reproduce the whole space of 360° x 180°, spherical or cubical projections are the first choice. These panoramas are mostly used for internet presentations rather than for print. They are integrated into the website with Java, Flash or Quicktime players. The ­visitor can move interactively in the panorama, seeing just a part in the flat into that he is used to. Several examples are presented on the internet at www.pixelrama.de Which projection type should be used? This decision depends on the field of view, the scene and your own choice. By the way: You do not need to make this decision when taking the pictures. This can be made later on at your computer, where you can compare the different variants. Generally speaking, the following is recommended: Small field of view = flat projection Wide field of view = cylindrical or spherical projection.

Reproduction as a cubical panorama with six square faces.

Spherical projection with 360° horizontal and 180° vertical picture field of view

Advice:

The stitching software PTGui is one of the few programmes offering all of the projection types presented on this page.


Panorama heads and plates Panorama heads

Panorama VR-System II

Panorama VR-System 6/8

Panorama VR-System PRO II

Panorama plates / Click-stopps

1x Panorama=Q / no

1x Panorama=Q 6/8 / yes 1x Panorama=VR / yes

1x Panorama=VR / yes 1x Panorama=Q PRO / yes

Delivery scope

Panorama base Panorama=Q, focusing rack Castel Q (length 20 cm), L-bracket QPL-Vertikal, spirit-level for flash shoe, software PanoramaStudio, manual on CD

Panorama bases Panorama=Q 6/8 and Panorama=VR for L-bracket QPL VR-PRO, clamping plate QPL-PANORAMA, spiritlevel for flash shoe, printed manual

Panorama base Panorama=Q PRO with click-stops, L-bracket QPL-VR PRO (23 x 23 cm), Panorama base Panorama=VR with click-stops 6/8, clamping plate QPLPanorama, spirit-level for flash shoe, printed manual

Suitable lenses

Focal lengths from 10 to 135 mm

Fisheye, super wide-angle lenses on full-format cameras

Focal lengths from 10 to 300 mm

Adjustment in optical axle

125 mm

150 mm

150 mm

Image reproduction

Single row

Single and multi row

Single and multi row

Panorama type

Flat and cylindrical projection

Spherical projections and other projection types derived from it

Flat, cylindrical and spherical projection

Recommended software

PanoramaStudio (included in the scope of PTGui, Photoshop delivery, for cylindrical projection only), PTGui

PTGui, Photoshop

Weight

960 g (2.1 lbs)

1230 g (2.7 lbs)

1690 g (3.7 lbs)

Camera / tripod fitting

1/4“ resp. 3/8“ / 1/4“

1/4“ resp. 3/8“ / 1/4“

1/4“ resp. 3/8“ / 1/4“

Order code

VR-SYSTEM II

VR 6/8

VR-PRO II

Panorama bases and plates

Panorama

Panorama=Q

Panorama=Q 6/8

Panorama=Q PRO

Scale

360° in 10° steps

2 x 180° in 10° steps

360° in 10° steps

360° in 10° steps

Click-stops

No

No

360° stepless 60° with 6 steps 45° in 8 steps

360° stepless, 60° in 6 steps 45° in 8 steps, 36° in 10 steps, 30° in 12 steps, 24° in 15 steps 20° in 18 steps, 15° in 24 steps, up to 10° in 36 steps

Quick-release

No

Yes, Q=Mount

Yes, Q=Mount

Yes, Q=Mount

Spirit-level

Yes

Yes

Yes

Yes, crossed spirit-levels

Dimensions

90 x 60 mm (3.6 x 2.4“)

93 x 60 mm (3.7 x 2.4“)

75 x 60 mm (6.7 x 2.4“)

140 x 86 mm (5.5 x 3.4“)

Height

18 mm (0.7“)

33 mm (1.3“)

33 mm (1.3“)

35 mm (1.4“)

Weight

170 g (0.4 lbs)

260 g (0.6 lbs)

270 g (0.6 lbs)

630 g (1.4 lbs)

Camera / tripod fitting

1/4“ resp. 3/8“ / 1/4“

1/4“ resp. 3/8“ / -

1/4“ resp. 3/8“ / -

1/4“ resp. 3/8“ / -

Order code

PANORAMA

PANORAMA=Q

PANORAMA=Q 6/8

PANORAMA=Q PRO


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.