EMEA 4

04 | APRIL 2016

EMEA

industry THE INDUSTRY MAGAZINE FOR EUROPE • MIDDLE EAST • AFRICA

Reinventing #mobile #SCADA

QR Code

NFC Tag

BLE Beacon

WiFi

GPS Location

NFC

...and much more!

Pertinent contextual data # to the right person, # at the right time, # in the right place, # in the secured way.

Stay connected

Your Independent Global SCADA Provider www.pcvuesolutions.com

ADVANTECH DOWNLOAD WHITEPAPER

SMALLER AND SMARTER: FISCHER CONNECTORS EXPANDS ITS ROBUST FIBEROPTIC SERIES

12

BRADY GO FOR ZERO WITH LOCKOUT/TAGOUT. GET THE FREE GUIDE DOWNLOAD THE GUIDE “SAFER MACHINE INTERVENTIONS”

04 | Industry EMEA | April 2016

THE INDUSTRY MAGAZINE FOR EUROPE • MIDDLE EAST • AFRICA

SECO TOOLS

NORD

NSK

5

7

8 TYCO GAS & FLAME DETECTION

FISCHER CONNECTORS

12 16

15

14 SIMTRONICS TYCO

STAHL

BALLUFF

EPLAN

18

17 HMS

SCOTT SAFETY

ADVANTECH

20

22

24

JUNGHEINRICH

ESPRIT

26

28

EMERSON INDUSTRIAL AUTOMATION

30

OLDHAM - TYCO

VERLINDE

32

34 ADVERTISERS: ARC INFORMATIQUE 4 - ADVANTECH 6 - ASCO SIRAI 11

www.industryemea.com

ARC INFORMATIQUE

36

NORD

37

04 | Industry EMEA | April 2016

3

Reinventing #mobile #SCADA Pertinent contextual data # to the right person, # at the right time, # in the right place, # in the secured way.

Select the technology you need...

QR Code

NFC Tag BLE Beacon

WiFi

GPS Location

NFC

...and get contextual data right where you are!

Stay connected

Your Independent Global SCADA Provider www.pcvuesolutions.com

NEWS

SECO ADDS LARGER INSERT SIZES TO T4-12 SQUARE SHOULDER, HELICAL MILLING CUTTERS

Square T4-12 Square Shoulder and Helical Range.

By adding larger insert sizes to its popular T4-12 line of square shoulder and helical milling cutters, Seco allows parts manufacturers to achieve increased depths of cut and higher metal removal rates when roughing and semi-finishing steel, cast iron and other workpiece materials.

I

Cutter diameters for the larger T4-12 helical inserts range from 50 mm to 100 mm (2" to 4"), with corner radii up to 3.1 mm (0.125"). The inserts also come in a wide selection of grades and geometries, including high positive rakes. Normal pitch cutters perform slotting and contouring operations, while close pitch versions only handle contouring, with a 30 percent radial width-of-cut capability in full axial depth-ofcut situations. Mounting systems for these cutters include Arbor, Weldon and Seco Weldon.

Cutter diameters for the larger T4-12 square shoulder inserts range from 25 mm to 125 mm (1" to 5"), with corner radii up to 3.1 mm (0.125"). The inserts also come in a wide selection of grades and geometries. Normal and close pitch versions contribute to successful slotting/contouring and optimised contouring operations, respectively. Internal coolant channels within the cutters further maximise insert performance. Available mounting systems for T4-12 square shoulder cutters consist of various shank and arbor-style cutters.

For more information on the T4-12 square shoulder and helical milling cutters, please contact a local Seco representative or visit www.secotools.com/squaret4

MORE INFORMATION

n continuing the value and stability of the T4-12 line, these larger-sized inserts all come with four curved cutting edges that lower the tooling cost per part and ensure smooth machining operations. These inserts tangentially mount in their cutter bodies for increased performance stability and easier access to their mounting screws. Moreover, this type of mounting directs the cutting forces to the thickest part of the inserts, which contributes to the higher metal removal rates of these products.

04 | Industry EMEA | April 2016

5

NEWS

NEW TWO-STAGE HELICAL BEVEL GEARBOXES WITH OUTPUT TORQUES UP TO 50 NM

The NORD helical bevel gearbox series, now available for torques from 50 Nm to 660 Nm, ensures highly efficient speed adjustment in various applications.

NORD DRIVESYSTEMS expands its latest series of slim two-stage helical bevel gearboxes, adding a new smaller unit for output torques up to 50 Nm.

H

ighly efficient helical bevel type units therefore now complement the line-up of worm gearboxes that is already available for small loads. Thanks to superior manufacturing quality standards, the gear units are highly resilient and withstand large forces on the output shaft.

All versions feature a very high power density, ensuring robust reliability and easy handling. By default, the gearboxes support reverse operation. NORD customconfigures motors, drive electronics, accessories, gaskets, and lubricants for all industries.

The short-term overload tolerance is 275%, which leaves enough time for the motor protection to kick in. Mechanical blockages usually do not cause damage, but the drive can start right up again without service interruption.

One of the options, for instance, is the heavy-duty corrosionprotection treatment nsd tupH for the enclosure. www.nord.com

MORE INFORMATION

The new units are available for gear ratios from 3.58 to 61.88. They add a new size to the existing series that now comprises six sizes with output torques up to 660 Nm. NORD supplies the two-stage helical bevel gearboxes with hollow and solid shafts, single or double shafts, for foot or flange mounting, and in open or enclosed designs.

04 | Industry EMEA | April 2016

7

NEWS

NSK CELEBRATES 100 YEARS OF MARKET LEADING MOTION TECHNOLOGIES

A replica of NSK’s first bearing in 1916.

In 2016, NSK (Nippon Seiko Kabushiki-gaisha) will celebrate 100 years of providing the engineering market with optimised motion technologies.

W

hen Takehiko Yamaguchi founded NSK Ltd in 1916 with capital of ¥350,000 (€2655), the company became the first bearing manufacturer to be established in Japan. Today, the company has the biggest share of the bearings market in Japan and is one of the largest bearing suppliers in the world. NSK has also diversified successfully into markets such as automotive products, precision machinery and parts, and mechatronics products, all helping to generate net annual sales (for the year ended 31 March 2015) of ¥974.9 billion (€7.4 billion).

From humble beginnings a century ago, NSK soon began to achieve growth serving Japanese sectors such as mining, railway, textiles and shipbuilding – all of which remain relevant markets to this day.

MORE INFORMATION

During World War I, shipbuilding and other industries saw further development, and Japan was well on track to furthering its position as one of the world’s leading industrialized nations. The following years witnessed NSK achieve many notable milestones. For instance, in 1932 the company produced Japan’s first tapered roller bearing for the gasoline fuelled vehicles axle used on the national railways. Just five years later, NSK established its Fujisawa 04 | Industry EMEA | April 2016

8

bearing manufacturing plant, which is today the company’s earliest-established facility still in operation (NSK currently has 22 production sites in Japan).

During World War II, Japanese industry shifted production to meet military demand. Under orders from the government, NSK built started the production of aircraft and automotive bearings. As the war progressed and bearings could no longer be imported into Japan, NSK opened a series of factories and continued to ramp up production capacity.

Before long, the company began production of Japan's first modern design ball and roller bearings.

In 1945, NSK achieved another first in Japan, producing the main-shaft bearings for Japanese Navy Ne20 the country’s first turbojet engine. NSK has always taken on the challenge of entering new fields. Over the years the company has supported the development of industry by making significant contributions to the production of jet airplanes, thermal power plants, high speed railways Shinkansen, VCRs, satellites and high density HDD for PCs, to list but a few technological breakthroughs.

NSK President and Chief Executive Officer, Toshihiro Uchiyama.

NEWS

NSK was listed for the first time on stock exchanges that included Tokyo, Osaka and Nagoya in 1949, a move that preceded a period of rapid economic growth in post-war Japan. A number of emerging target markets starting appearing in the late 1950s, with NSK providing bearings for essential home appliances such as vacuum cleaner, washing machines and refrigerators. Around the same time, the company developed precision ball screws for steering systems in cars and trucks.

In the following decade, after the establishment of its first overseas sales office at Ann Arbor, Michigan in the United States, NSK continued to set up business locations overseas.

The 1960s also witnessed the arrival of NSK miniature ball bearings for high speed dental drills, which rotate at around 450,000 rpm to reduce pain during treatment. In addition, NSK commenced the production of parts for automatic transmissions.

In 1982, NSK opened the electronics technology centre and expanded into the area of applied electronics, a move that led to today's mechatronics technologies, such as electric power steering (EPS) and human assistive robots.

In the 2000s, along with boosting exports from Japan, NSK also expanded its overseas production and continued to drive new product development. For instance, 2004 witnessed NSK mass produce the world’s smallest (at the time) deep groove ball bearing with an outside diameter of just 2 mm.

With the introduction of the Euro as the single EU currency came renewed economic ambition and growth across Europe. Headquartered in Maidenhead, UK, NSK Europe is currently nearing the end of a restructuring phase that will help the company serve its customers in an even more targeted and individual manner through further optimized services.

MORE INFORMATION

The 1970s saw NSK establish a manufacturing subsidiary near SĂŁo Paulo in Brazil, followed by other new manufacturing subsidiaries in North America, the UK and Asia.

During the 1990s, NSK acquired UPI, the largest bearing manufacturer in the UK, known for its RHP brand. Expanding production and sales locations in all European markets resulted in a stronger market presence for NSK in Europe. The same decade saw NSK rapidly expand its operations in Asian markets, particularly China. Here, the company set about strengthening its corporate structure to carry out research and development, sales and technical services locally. Other emerging markets, such as India and Indonesia, were also underpinned with new local production facilities.

>>>

04 | Industry EMEA | April 2016

9

NSK’s Mexico plant was established in 2013.

NEWS

NSK Europe has annual sales of €1 billion (as of March 2015) and 3500 employees. The company, which has production plants in Germany, Poland and the UK, has also won many notable supplier awards in the past decade, including from global OEMs such as Bosch, BSH, Continental, DMG-Mori, Festool, Kessler, PSA, Toyota and Volkswagen.

With the recovery of the global economy post-2009, NSK has continued building its global business structure on solid management foundations, seeking to “establish corporate fundamentals appropriate for a company with net sales of nearly ¥1 trillion”. As of March 2015, the NSK Group had 31,088 employees on a consolidated basis and a global network of 214 sites in 30 countries. The most recent production site to open is located at Silao, Guanajuato, Mexico, which commenced operations in 2013. From its 65 production sites worldwide, NSK now produces around 2.2 billion bearings each year, bringing class-leading motion and precision to the industrial world.

MORE INFORMATION

NSK is now ready to take the first steps into the next 100 years, by focusing on quality, safety and compliance. First, the company will aim to achieve operational excellence to further improve the competitive edge of its existing businesses and build a firm management foundation. Then, NSK will pursue the next level of innovation to drive the next phase of growth, providing new value to society by creating new technologies, new products and new businesses.

04 | Industry EMEA | April 2016

10

NSK’s original Osaki plant in 1916.

To find out more about 100 years of NSK, visit www.nsk.com/100th/index.html www.nskeurope.com

SOLENOID VALVES

You get the peace of mind that comes with purchasing from a long established supplier with the backing of one of the largest global technology companies.

You get the support that you need throughout the whole purchasing cycle thanks to an extensive local and international network of sales staff and distributors.

You also get a product that optimises the performance you need from your machine or process, without paying for functionality or performance that you don’t need.

Simply what you need

Sirai - Bussero (MI) Italy - Tel. +39 02950371 - sirai.com TM

1946 2016

NEWS

SMALLER AND SMARTER: FISCHER CONNECTORS EXPANDS ITS ROBUST FIBEROPTIC SERIES WITH A NEW SINGLE FIBER OPTIC CONNECTIVITY SOLUTION

Fischer FiberOptic Series

Fischer Connectors, the worldwide leader in push-pull circular connectors and cable assembly solutions, today launched its new single fiber optic connector (FO1) within its Fischer FiberOptic Series. This miniature, lightweight, rugged connectivity solution is easy to use and ensures premium performance even in harsh environments.

T

he FO1 connector is available either in pre-configured reels or integrated into custom assemblies for applications in instrumentation, sensing, defense and broadcasting – to name only a few of the various fields for which this new product is ideally suited.

Combined miniaturization and robustness The new connector fulfills the growing market need for higher data transmission rates over long distances, while reducing space and guaranteeing performance by means of rugged miniature solutions.

MORE INFORMATION

The FO1 connector integrates fully into the existing Fischer FiberOptic Series, well-known for its robust and faultless optical performances in any conditions, combined with easy use, cleaning and maintenance even in the field. UPC & APC polishing reduces insertion and return losses, making devices more secure, while IP68 sealing provides highly valuable device protection. The push-pull locking system allows quick and easy connections and disconnections, 04 | Industry EMEA | April 2016

12

making these connectors ideally suited for outdoor environments. The removable sleeve holder (monobloc mate adapter) ensures that end faces can be cleaned easily, keeping electronics in top condition.

More flexibility for more efficiency “We’ve extended our Fischer FiberOptic Series bearing our customers’ needs for flexibility and efficiency in mind”, says Christopher Martin, FiberOptic Product Manager at Fischer Connectors. “The product line’s main benefits – high optical stability in harsh environments, robustness, and ease of use, cleaning and maintenance – remain the same. But we’ve designed this smaller product to be even lighter and more flexible so that it’s easy to integrate into existing solutions, saving time and money for our customers.” As a reminder, the Fischer FiberOptic Series already includes two versions: a rugged fiber optic connector with two or four fibers, and a rugged hybrid connector with two fiber channels and two electrical contacts.

NEWS

The FO1 connector has been tested to withstand temperatures of -40 °C.

In a nutshell: main technical specifications • IP68 mated & IP67 unmated ingress protection (Norm IEC 60529) • UPC & SM APC polishing • Easy cleaning even in the field • High optical performances for high precision and data transmission rates • Harsh/extreme environment fiber optic solution (Norm IEC 61753-1 Cat. E) • Push-pull user-friendly mating plugs & receptacles • Available with gas-tight panel receptacles and with SM & MM optical fibers • Size: 13 mm

More information: • Website: www.fischerconnectors.com/single-fiber-fo1 • White paper “Fiber optic sensing”: www.fischerconnectors. com/global/en/white-paper-sensing • How to contact us: www.fischerconnectors.com/global/ en/contact-us

MORE INFORMATION

Selecting fiber optic solutions made easy The FO1 connector can be pre-configured with Fischer FiberOptic Series reels of any required length, a convenient and flexible turnkey solution. To enable customers to choose the right connectivity solution for their specific needs, Fischer Connectors also provides a user-friendly request form that guarantees the mistake-proof configuration of cable assemblies.

04 | Industry EMEA | April 2016

13

NEWS

TYCO LAUNCHES NEW GAS AND FLAME DETECTION BRAND

Five Global Companies under One Brand Provide Complete Gas and Flame Detection Solutions.

MORE INFORMATION

T

yco International (“Tyco” NYSE: TYC) today announces the formation of Tyco Gas & Flame Detection, a new operating brand of Tyco’s Life Safety Products division. Under this new brand, Tyco intends to be the global solutions provider of choice for all entities with gas and flame detection needs.

In addition to providing customers with a complete range of innovative gas and flame detection solutions, Tyco Gas & Flame Detection offers one of the most comprehensive service and support networks in the world, leveraging Tyco’s global installation and service footprint, along with an established network of authorized service providers.

The launch of Tyco Gas and Flame Detection represents the culmination of integration activities since Tyco’s acquisition of Industrial Safety Technologies (IST) in February of 2015.

The combination of IST companies - Detcon, Oldham, Gas Measurement Instruments (GMI) and Simtronics - together with the gas and flame detection portfolio of Scott Safety makes Tyco Gas & Flame Detection one of the largest global manufacturers of innovative gas and flame detection products, providing customers with a complete range of solutions and services.

“Under Tyco Gas & Flame Detection, we are now able to share best practices and ideation across our businesses to deliver a comprehensive product portfolio with the most advanced technology and support level in the industry,” said president of Tyco Life Safety Products, Andrew Chrostowski. ”As part of Tyco’s global network of fire and security solutions, we are uniquely positioned to deliver innovative solutions to our customers.”

“Our mission is to be the global technology leader and world-class provider of innovative and trusted gas & flame detection solutions that protect people, assets and the environment,” said general manager of Tyco Gas and Flame Detection, Sean Magee.

04 | Industry EMEA | April 2016

14

Tyco’s Life Safety Products division is focused on protecting what matters most. Going forward, it will go to market through two primary brands: Tyco Gas & Flame Detection and Scott Safety. Scott Safety will remain the primary brand for personal protective products, delivering the world’s leading respiratory protection, thermal imaging, and PPE solutions for first responders, industrial workers, and military personnel around the world. www.tyco.com

NEWS

SIMPLY AIM, TRIGGER, DONE!

Fast, versatile barcode reader from Balluff for harsh industrial use.

W

ith the new Industrial Handheld Reader BVS HS-P Balluff expands their offering of optical identification: the portable reader with intuitive operation reliably reads high-resolution barcodes as well as codes over a wide range at a read distance of up to 110 centimeters. Direct Part Marking (DPM) codes can also be read. The ruggedly constructed device offers IP 65 protection and withstands drops from up to two meters without any damage. The wireless version features Bluetooth to give the user the greatest possible freedom of movement within a range of up to 100 meters around the base station. This flexible portable reader is ideal for a variety of applications including traceability, automated replenishment and logistics.

The wireless version with its high-capacity rechargeable battery increases the flexibility and enables a variety of portable situations. The Industrial Handheld Reader BVS HS-P from Balluff is simple to integrate via USB, Bluetooth or RS 232 interface. The ergonomic design and low weight ensure comfortable and fatigue-free work. www.balluff.com

MORE INFORMATION

The ergonomically designed Industrial Handheld Reader BVS HS-P from Balluff decodes all common 1D, 2D and stacked barcodes on objects moving at up to 0.8 meters per second.

Even tilts of up to 40° and rotation angles of up to 180° do not affect the read reliability. The optical aiming system with a highly visible laser marking border makes handling and target acquisition simple. Acoustic and optical LED signals including a projected LED spot on the code ensure reliable read confirmation in loud or bright surroundings.

04 | Industry EMEA | April 2016

15

NEWS

EXLUX LINEAR LUMINAIRES FROM R. STAHL: LATEST LIGHTING TECHNOLOGY IN TRIED-AND-TESTED FITTING

Energy-efficient general lighting retrofits in any climate are straightforward with R. STAHL EXLUX 6002/6402 series linear luminaires.

Despite a familiar appearance due to their tried-and-tested fitting design, R. STAHL 6002 and 6402 series linear luminaires use the latest LED technology inside. Suitable for ceiling installation, use as pendant lights, or pole mounting, these explosion-proof devices enable particularly energy-efficient general lighting in zones 1, 21, 2 and 22.

T

heir familiar form factor ensures that changing over from traditional linear luminaires with fluorescent tubes to LED light sources is an especially straightforward process. In photometric terms, one 52 W luminaire is fully equivalent to two conventional 36 W fluorescent lamps. However, up to 100,000 hours of operation mean they achieve a far superior service life, as well as a high luminous flux of up to 5800 lm and excellent luminaire efficiency of well over 100 lm per W.

MORE INFORMATION

In addition, thanks to their slim, low-profile GRP housing, the lights weigh at least one third less than widely available competing products in the same class. Series 6002 models feature “increased safety” (Ex e) type of protection, while 6402 series luminaires are “non-sparking” (Ex nA). Notable for their very robust IP66/IP67 design, the products can be used at environmental temperatures ranging from -30 °C to +55 °C.

04 | Industry EMEA | April 2016

16

Both series feature very economical 28 W or 52 W standard versions. They are available with or without diffusers in lengths of 700 mm and 1310 mm. The current R. STAHL lighting solutions campaign provides instructive information on all crucial benefits of LED lighting compared with conventional light.

The campaign website, www.stahl-explorers.com, not only features background information on LED technology and the latest news on lighting solutions, but also a series of action-packed short clips showing luminaire operation in truly extreme conditions. www.stahl.com

NEWS

SIMTRONICS’ GD10P/PE GAS DETECTORS NOW SIL2 CERTIFIED

The GD10P series detectors are 4-20 mA analog Point Infrared combustible gas transmitters with long life and very low maintenance.

Simtronics is pleased to announce that its GD10P and GD10PE infrared gas detectors are now certified SIL 2 and SIL 3 capable.

T

he Simtronics GD10P detector is the benchmark for combustible gas detection on offshore installations.

It has set the standard for gas detectors in the areas of safety, stability and low maintenance. The GD10P comes with 5 years warranty on the complete transmitter and a 15 year warranty on the IR Source. The GD10P has been designed with features that provide an effective response to the detection of gas hazards in a wide range of industrial environments from boiler plant rooms to offshore petrochemical installations.

We offer the longest combined detector and IR source warranty on the market.

For retrofit applications, a bridge interface is available allowing the detector to be connected directly to catalytic systems, using the existing cabling and control modules.

The detector is supplied with worldwide performance and hazardous area approvals.

An industry standard HART® interface is used for configuration of the optical fast response time and special fault levels as well as access to extended maintenance data.

These infrared gas detectors differ from all other models, because they utilize silicon based solid-state infrared sources. The complete optomechanical design and construction is so stable that an ultrafast speed of response of less than 2 seconds can be achieved whilst providing unparalleled service life and detector stability, thus saving on maintenance and service costs.

Now all of these features are covered by TÜV Rheinland Safety Integrity Level (SIL) 2 certification for a single transmitter, and SIL 3 certification for installations with redundant transmitters.

MORE INFORMATION

For more information, please see the pages for the GD10 on our website www.simtronics.eu

04 | Industry EMEA | April 2016

17

NEWS

EPLAN PRESENTS THE NEW SMART WIRING APPLICATION SIMPLFYING CONTROL CABINET WIRING

Smart Wiring Application: The Smart Wiring Application provides step-by-step instructions for the panel shop based on engineering data.

Wiring a control cabinet requires a lot of time and expertise, however Eplan is making the process much easier: the Smart Wiring Application will be presented at the Hannover Messe. The software visualises the wiring and provides the necessary production data 100 per cent digitally. The ad-vantage: knowledge of the control technology is plugged into the system in the future. Users benefit from substantial timesavings for last-minute changes because the software also handles the often complex task of project comparison.

S

mart Wiring Application: the name reveals what’s behind the new software – greatly simplifying the entire control cabinet wiring process. Eplan is presenting this new solution at the Hannover Messe.

Whether it’s the source/target description, terminal point handling, cross sections, colour, wire length, end procedures or exact cable routing: the software provides a visualisation and the necessary wiring information and engineering data for mounting assembly within the control cabinet.

MORE INFORMATION

The advantage: the schematic-based wiring – a timeconsuming, error-prone process requiring a great deal of know-how – is no longer required. The Smart Wiring Application’s digital representation refers to the virtual model’s 3D-layout in Eplan Pro Panel. Yet the new application can be utilised to enhance productivity even without a 3D-layout.

04 | Industry EMEA | April 2016

18

As an example, Excel lists with all the required connection information can be read into the program; the 3D visualisation of the routing pathways and assembly steps cannot be provided – however, the step-by-step execution as well as the comparison of various connection lists for last-minute changes remain available. Workers have clear information at all times about how far along the wiring process is as a whole, what still remains to be wired, which potentially necessary changes they must make and how to make them. The Smart Wiring Application will be available with the release of Eplan Platform 2.6 in September 2016.

System-guided application A clearly designed menu describes every single connection. This information is augmented with the equipment visualisation, including terminal points and the planned cable routing for the wires within the control cabinet. The software further provides information about the required wire diameter, the colour to be used and the defined

NEWS

Background Up to 43 per cent of the working time required to manufacture a control cabinet is consumed by the wiring (depending on its specific application). This process

Advantages of the Smart Wiring Application • Integrated workflow from customer requirements through engineering to manufacturing and testing • 100% digital data • Wiring without schematics • Perfect visualisation • Step-for-step directions for the worker • Project comparison for last-minute changes • Logging of wiring status • Better scalability of workloads

MORE INFORMATION

Fast process for last-minute changes The Smart Wiring Application really demonstrates its strength with last-minute changes to the project, which are simply registered in Eplan Pro Panel and then updated.

Through the Smart Wiring Application, the two project statuses are compared to one another and the software documents all the differences, saving enormous amounts of time as compared to doing this manually. The software shows all the obsolete connections, those which have already been wired but must be removed, and which additional connections are required. This means that the times when wirers had to search and think about how the changes affect the entire wiring and manufactur-ing process have come to an end.

is extremely time-consuming and requires enormous specialist knowledge. What must be connected by wire, , and how can the required wires be optimally routed? These control-technology questions usually must be answered by using the schematics, which provide the basis for the cabinet’s wiring. As a result, highly qualified specialists pore over hundred of circuit diagrams and, page for page, work through the wiring for assembly and installation, the realisation of which may not always be unambiguous in every case. The Smart Wiring Applica-tion means that the time saved can be used more productively.

Source: Eplan Software & Service.

terminal point handling – crimped or ultrasonic welding, for instance. Bundle affiliation is also exactly shown, which, taken together, means that every connection as well as every working step are clearly understandable and transparent. As soon as a connection is completely wired, it’s shown in traffic-light-principle green. This is tremendously helpful if several shifts are necessary to complete the work: colleagues can start wiring exactly where their predecessors left off.

www.eplan.com

04 | Industry EMEA | April 2016

19

NEWS

NEW “EDGE GATEWAYS” FROM HMS ENABLE COMMUNICATION BETWEEN IT-SYSTEMS AND THE FACTORY FLOOR

HMS Industrial Networks now introduces yet another gateway family for the Industrial Internet of Things.

The new Anybus .NET gateways enable real-time data from industrial machinery to be presented to .NETbased IT applications. This means that .NET programmers can get data directly from a PLC system on the other side of “the edge” to be used in applications for statistics, analysis or maintenance. The first .NET gateways are available for PROFIBUS and PROFINET.

MORE INFORMATION

A quick and easy way to realize IIoT The basic prerequisite for Industrial IoT is that industrial applications are able to communicate with IT systems.

However, the operational technology (OT) on the factory floor uses fieldbus and industrial Ethernet networks, which are designed for real-time communication – by default separated from the IT-infrastructure. The Anybus .NET gateways address this situation by acting as translators which send and receive data between PROFIBUS- or PROFINETnetworks and IT platforms using .NET as a framework. The communication is set up in a couple of minutes and the .NET gateways are therefore a very fast way to realize IIoT.

04 | Industry EMEA | April 2016

20

The result is that IT systems get unprecedented access to realtime data from the factory floor which enables predictive maintenance, KPI-follow-up, machine analytics, data mining, big data processing, production statistics and much more – without interfering with the industrial processes.

The solution can be used for a wide range of use cases, from simple transfer of KPI values, advanced messages with structured data types, or ultra-fast transfer of I/O data for “big data.”

How it works In addition to connecting the data from the industrial processes to the IT-systems, the .NET gateways make the data understandable on the IT-side. The information exchange between the Operational Technology (OT) side and the Information Technology (IT) side is defined in a spreadsheet template which defines how the data is mapped, tagged and presented to IT-applications. The

NEWS

spreadsheet is uploaded to the HMS code generator which automatically creates a customized high level C# API (events and Post methods) that is easy to integrate directly into a .NET application. It also generates a customized GSDML file for the PLC. Easy for both .NET and PLC programmers “The Anybus .NET gateways represent a very fast and easy way to realize the Industrial Internet of Things,” says Markus Bladh, Product Manager at HMS Industrial Networks. “For more than 20 years, HMS has been offering industrial communication solutions between different standards on the factory floor, and we now use this experience to offer a gateway to .NET. This is truly an ‘edge gateway’ in the sense that it creates a bridge between the IT and OT side – .NET programmers get access to data from industrial machinery, while PLC programmers can rest assured that the data access does not interfere with their critical systems.” www.tekinfo.link/r7d5a831135 MORE INFORMATION 04 | Industry EMEA | April 2016

21

NEWS

A GAME CHANGER FOR CBRN DECONTAMINATION FROM SCOTT SAFETY

A new portable airborne and surface decontamination solution from Scott Safety is achieving a military first – decontamination of chemical, biological and radiological vapours, liquids and particles simultaneously in as little as five minutes. A manufacturer of respiratory protection for the UK MoD, Scott Safety has been at the forefront of CBRN defence and civil protection for over 80 years.

T

he Light Decontamination System (LDS) can decontaminate environments as large as 500m³.

At only 22 kg, LDS is the lightest portable decontamination system in its class, enabling instant decontamination of equipment, personnel, infrastructure and terrain.

“LDS will revolutionise the armed forces” says Dr David Crouch, Global Product Manager for Military & Civil Defence at Scott Safety. “It’s lightweight, portable yet extremely powerful. In independent validation trials, the system decontaminated anthrax by 99.9999999 percent from a 100m³ space, in less than five minutes.”

The LDS utilises new Scott Safety atomisation technology to create a fine mist to ensure even and consistent coverage and haptic dry surfaces. Rapidly projecting these droplets in the form of a dense and turbulent mist that reaches all airborne and surface threats simultaneously the system is capable of delivering CBRN decontaminants to all nonline of sight surfaces. This process drastically reduces both the chemical footprint and time required for effective decontamination. Unlike many traditional decontamination systems that utilise liquids, this new process forces powders to behave like a gas, ensuring that sensitive and electronic equipment is not damaged.

MORE INFORMATION

Environmentally friendly and cost-efficient, LDS typically requires only five percent of decontaminant compared to traditional systems due to the gas-like behaviour of the small droplet mist. Easily directed and controlled with a lance, the system achieves a projection distance of up to 30 metres and is compatible with a range of chemistries.

04 | Industry EMEA | April 2016

22

NEWS

For chemical and biological decontamination, the LDS is chemically agnostic so can use a diverse range of decontaminants including delivery of Alkoxides, Hydrogen Peroxide, Hypochlorous Acid, Peracetic Acid esters, Chlorine Dioxide, Sodium Hypochlorite and Potassium Peroxymonosulfate. Radiological and nuclear decontamination includes delivery of trippable coatings, fixatives and other sequestering liquids.

For further information, please visit www.scottsafety.com/emea

Compatible with a range of facemasks, including the General Service Respirator (GSR) developed for the UK MoD, the LDS can be used in a wide range of hazard management situations. e.g. critical and iconic infrastructure, airport buildings, hospitals, portable isolation units, underground facilities, buildings and rooms in general, containers, storage facilities, aircraft and ships holds, vehicles and so on.

MORE INFORMATION

Flexible and scalable, Scott Safety’s decontamination solution can be adapted for large scale infrastructure whereby longer duration or wider area capability of up to 2000m³ is required. The Remote Decontamination System (RDS) operates using a remotely operated 360° collapsible tripod to provide increased levels of decontamination efficacy and performance. The solution is highly portable and is suitable for internal and external decontamination of larger military equipment including armoured vehicles, aircraft and other transport systems.

04 | Industry EMEA | April 2016

23

NEWS

ADVANTECH LAUNCHES IXM SUPPORTING MANAGED SWITCH

Advantech’s Industrial Connectivity Group (ICG) are pleased to announce the launch of their first switch which supports IXM device management technology. IXM, provides engineers with the ability to assign a fixed range of IP address to many devices at the same time, and also provides them with the ability to simultaneously copy the same switch configuration across multiple switches.

O

nce the ‘master’ has been configured, IXM can be launched and within seconds all other IXM compatible switches will be populated with the same settings. This function saves up to 90% of the configuration time not only speeds up the configuration but also ensures that mistakes aren’t made.

IXM: Faster Network Deployment The latest trend in modern industrial environments is the fast deployment and flexibility of a networking topology.

Upgrading firmware and setting the configuration of a large number of devices is a challenging job for both IT and SI (System Integrator) professionals. As a global leader of industrial networking technologies, Advantech is pleased to introduce the world’s very first series of Managed Ethernet Switches to make networking deployment and configuration more efficient. IXM technology on the EKI7710 is the solution to fast network and configuration deployment.

MORE INFORMATION

IXM technology for EKI-7710 series switches provides a cross management and fast deployment function allowing switches to upgrade their firmware and restore configuration more efficiently.

In order to allow more rapid networking deployment, IXM technology supports both mass firmware upgrades and flexible configuration restoration via a web GUI. The EKI04 | Industry EMEA | April 2016

24

NEWS

7710 comes with a jumbo frame function which supports packets up to 9216 Bytes. The benefit of jumbo frames is that they can carry more data in a packet. This makes it ideal for video surveillance.

For more information about EKI-7710 series and IXM technology visit our website: www.advantech.nl/factoryautomation/technology%20highlight/513a0483-79bd4d70-88ee-a7d2221c29d5/ and watch this interesting video: www.youtu.be/KEL0Aqf1tsk

EKI-7710 Managed Ethernet Switches use the highest quality components to be able to operate in a wide range of operating temperature from -40 to 75째C and Level 3 EMS protection against electromagnetic interference.

Key Functions: 1. IXM provides auto IP assignment, mass firmware upgrades, mass and flexible restoration of configuration files.

2. Communication with NMS (Networking Management System) via SNMP. 3. PoE (Power over Ethernet) model supports IEEE802.3at with two 24~48VDC power inputs and P-Fail relay.

4. S upports Advantech X-ring and X-ring Pro technology MORE INFORMATION

5. S upports IPv4 and IPv6

04 | Industry EMEA | April 2016

25

NEWS

JUNGHEINRICH UNVEILS TOTALLY NEW COMBI STACKER

Two-shift operation with a single battery / New synchronous reluctance motor / Lower energy consumption, thanks to intelligent lightweight design / Vibration damping system results in enhanced performance and safety on uneven floors.

J

ungheinrich is market-launching a new narrow-aisle forklift – its EKX 514-516 electric order picker and trilateral forklift – in short, a “combi” (combination) stacker. With a payload capacity of 1,600 kilograms and a lift height of 17.5 metres, the new model will be officially unveiled before a global trade audience at the LogiMAT 2016 exhibition in Stuttgart (hall 9, stand 9B02 and 9B04).

Efficient and Economical, with Just One Battery for Two Shifts The truck is equipped with state-of-the-art control technology, completely new motor technology and an efficient energy management system. Its intelligent lightweight design makes use of high-strength steels, resulting in a weight reduction of 150 kilograms. “This means we can guarantee the efficient and economical operation of the stacker over two shifts with a single battery charge,” states Dr Klaus-Dieter Rosenbach, Jungheinrich Board of Management member in charge of Logistics Systems Business.

MORE INFORMATION

For two-shift operations this eliminates not only the need for extra batteries, but also for charging stations and other expensive equipment, while at the same time reducing manpower requirements. Rosenbach continues: “This is not a mere promise of two-shift operation without changing the battery – we also back up this claim vis-à-vis the customer.”

In other words, if a battery fails to hold a charge for two full shifts, Jungheinrich will replace it free of charge.

04 | Industry EMEA | April 2016

26

NEWS

Economical Motors: 93 Percent of Energy Converted into Output Completely new motor technology developed by Jungheinrich is at the core of the EKX 514-516. This consists of a synchronous reluctance motor which has been used for the first time in this vehicle – a motor which combines the high performance and energy efficiency of synchronous motors with the cost advantages and low maintenance requirements of three-phase AC asynchronous motors.

According to Rosenbach the motor’s efficiency factor of IE31 is the highest achievable in forklift operations. The new motor technology converts around 93 percent of the energy consumed into actual output, cutting energy losses by half.

“This means that energy consumption has been reduced by a further 15 percent compared to the previous model,” remarks Rosenbach. “And this, despite the vehicle’s much higher performance,” he adds.

easy on loads and vehicle and helps reduce the level of maintenance. The goal is to allow narrow-aisle trucks to work safely and efficiently even on floors that were originally designed solely for reach trucks – even at lift heights of 10 metres.

The new EKX 514-516 is fitted with a number of different modules for process integration, including RFID technology, redundant height and distance measurement and the Jungheinrich Logistics Interface. If the optional Jungheinrich warehouse navigation system with semi-automatic target approach is added, throughput can be enhanced by up to 25 percent. Dr Rosenbach concludes: “By combining intelligent assistance systems with high-performance synchronous reluctance motors, Jungheinrich has made great strides in further optimising energy efficiency – putting us in great shape to meet the future challenges of Intralogistics 4.0.” www.jungheinrich.com www.ntpforklifts.com.au MORE INFORMATION

Reaching Great Heights Smoothly and Safely, Thanks to Vibration Damping For the first time Jungheinrich is also equipping this model series with a patented vibration damping system. The optional Floor Pro module reduces lateral oscillations of the mast and driver’s cab which are caused by uneven floors or other floor types not designed for narrow-aisle forklifts.

“This system provides the user with the opportunity to travel more smoothly and up to 30 percent faster on substandard surfaces,” explains Rosenbach. In addition the system is

04 | Industry EMEA | April 2016

27

NEWS

ESPRIT CAD/CAM SOFTWARE UNVEILS INNOVATIVE NEW WEBSITE AND BRANDING

ESPRIT CAD/CAM’s innovative, educational and responsive new website: espritcam.com

ESPRIT CAD/CAM SOFTWARE enters a new era with the launch of its new brand identity and corporate website, espritcam.com. The website showcases an elegant new 3D-style logo that updates yet honors the company’s original one.

Immediate and Immersive Experience “Our new website immerses visitors in the software - straight from the homepage,” says ESPRIT’s Director of Global Marketing and Communication, Cédric Simard. “Thanks to our educational videos, machinists can instantly experience ESPRIT software in action and witness its compatibility with machine tool brands from around the globe.”

Educational Content The new website showcases ESPRIT’s capabilities, especially in 5-axis, multitasking, wire EDM, and Swiss-style machining.

In addition, product pages highlight ESPRIT’s compatibility with machine tool builders, world-class customer support and factory-certified post processors. www.espritcam.com

MORE INFORMATION

Intuitive and Responsive Design Built with machinists and ESPRIT customers in mind, the website is available in nine languages and is responsive across multiple platforms and devices. The site features clear navigation for visitors in any manufacturing industry.

Whatever their needs, machinists can access relevant information based on their industry, their machine tool, or the type of machining operation they want to perform.

04 | Industry EMEA | April 2016

28

NEWS

ESPRIT product icons on the new homepage.

The new ESPRIT 5-axis product page demonstrating ESPRIT’s machine tool compatibilities.

ESPRIT 5-axis customer success stories from various manufacturing industries.

The new interactive ESPRIT 5-axis product page.

MORE INFORMATION

An educational video showcasing ESPRIT’s compatibility with Mazak machine tools.

04 | Industry EMEA | April 2016

29

NEWS

NEW RANGE OF FFB “FLEXIBLE CONCEPT” BRAKE MOTORS ON THE IMFINITY® INDUCTION MOTORS PLATFORM

Many sectors, including conveying, hoisting, transfer and indexing, require safe and increasingly flexible drive solutions. The brake motor, at the heart of the system, is a key element for reliability and safety, and must meet the most demanding requirements in industry.

E

merson Industrial Automation, a company well-known in the handling business, presents its new range of Leroy-Somer FFB brake motors developed around the “Flexible concept”, a high-performance design which is the product of over 50 years’ experience in industrial applications. This robust, innovative concept offers an extensive range of options associated with safety and variable speed as standard, thus making the FFB brake motor ideal for a multitude of applications.

MORE INFORMATION

Reliability and robustness With the latest generation IMfinity® induction motor from Emerson, the FFB brake motor is based on a tried and tested design, ensuring it can withstand the most severe stresses encountered in handling applications.

Its mechanical and electrical design is based on recognised expertise in industry, civil engineering and lifts, making it highly reliable and extremely robust.

Performance and safety Designed making full use of Emerson’s technological and industrial expertise, the FFB brake motor can be integrated in most fixed or variable speed applications quickly and easily. Its modular encoder adaptation principle makes it a versatile motor, suitable for the simplest to the most demanding variable speed applications.

The total control of the noise level, for both pick-up and engagement, as well as optimum control of application and release, make the FFB brake motor one of the best of its generation.

This new range, sized for dynamic braking, is based on failsafe operation. The industrial control of its performance (running-in of all the friction parts as standard) and a wide range of braking function supervision accessories (opening, closing and wear sensor, etc.), significantly increase the safety of the transmission chain.

International use and energy efficiency The multi-voltage, multi-frequency construction of the FFB brake motor, covering 80% of the world’s power supplies,

04 | Industry EMEA | April 2016

30

NEWS

makes it ideal for use in many countries. Just one product reference is all that is needed, in place of the previous four or five.

In order to achieve significant energy savings, FFB brake motors offer various different efficiency levels: non-IE, IE2 and IE3. Ideal for variable speed operation, they comply with requirements for improved energy efficiency in motorised industrial applications.

Express availability The flexible architecture of the FFB brake motor, together with the organization of Emerson production and distribution facilities, make it possible to meet customers’ delivery requirements precisely.

Main technical characteristics: - 5 sizes - Frame sizes: 71 to 160 - Braking torques: 4.5 to 200 N.m.

- Multi-voltage 230/380/400/415 and 460 V - Multi-frequency 50 and 60 Hz - DC brake coil: 180 V or 20 V - Power supply built into the motor or separate via rectifier supplied in the motor terminal box www.emersonindustrial.com

A wide variety of products and options, combined with a range of gearboxes and variable speed drives, are available within one, five or ten days.

MORE INFORMATION

The new IMfinity® induction motors platform, the latest generation 3000 range of geared motors, the high performance levels of the Unidrive M variable speed drives and the FFB brake motor range all enhance Emerson’s ability to offer solutions that are designed to work together perfectly.

04 | Industry EMEA | April 2016

31

NEWS

NEW GAS TRANSMITTER: OLDHAM LAUNCHES THE 700/710 SERIES

Oldham is very pleased to announce the launch of the OLCT 700 and OLCT 710 gas transmitters. The 700/710 Series comprises 3 different models -FP, TP or IR- for the detection of flammable, H2S or CO2 gases.

T

he OLCT 700 can be used in combination with an increased safety approved junction box from your furniture. The OLCT 710 is ready to use and is made of an OLCT 700 attached to a junction box that contains the terminals and an optional surge protection module.

The OLCT 700/710 Series is specifically designed for harsh and extreme locations. It provides reliable operation in any circumstances between -40°C and +75°C. This new and superior level of environmental durability in sensor design includes an electropolished 316 stainless steel housing and 100% encapsulated electronics for complete protection and immunity to water ingress and corrosion.

MORE INFORMATION

The plug-in, field replaceable sensors can be easily replaced in the field. Operator interface is non-intrusive via a small handheld magnet and the embedded software is very intuitive.

SIL 2 certified according to IEC 61508:2010 functional safety standard, OLCT 700/710 instruments are also ATEX 2G certified for use in ATEX zones 1 and 2.

While the Model TP is using a poison-resistant catalytic bead sensor to detect combustible gases, the Model IR includes an infrared sensor to monitor combustible or CO2 gases.

The Model TP, it is equipped with a proprietary solid state metal oxide semiconductor sensor (MOS) and is very well suited to H2S detection in severe applications where the detector can be exposed to very high concentration/ temperature and very low/high humidity. It is commonly used: - in Wastewater Treatment Plants (primary treatment, biological treatment, etc. ), - in Oil and Gas Industry (production platforms, drilling rigs, refineries, etc.), - w hen temperature exceeds the upper operating temperature of 40-50°C. The 700/710 Series is compatible with all Oldham MX controllers and is ModBus compatible with the MX 40 which can connect to up to 32 detectors.

04 | Industry EMEA | April 2016

32

NEWS

The MX 40 has a 2Gb SD memory card and records all data (measurements, alarms, faults) in CSV format. The data can be read directly on the unit or digitally on our File Log Viewer software which can be downloaded free of charge from our website.

The MX 40 can be accessed remotely via Ethernet or GSM. A web page displays measurements and channel statuses in real time, and is accessible from any computer or wireless phone connected to the internet. This option also allows you to have SMS or email messages sent in the case of an alarm.

For more information, please visit the pages OLCT 700/710 on our web site www.oldhamgas.com

MORE INFORMATION 04 | Industry EMEA | April 2016

33

NEWS

VERLINDE VT HOIST USED FOR PELLOBY ONE-OF-A-KIND INVERTED TRAVELLING JIB CRANE

PELLOBY recently installed a unique inverted travelling jib crane featuring a VERLINDE VT2 EUROBLOC wire rope hoist at the Science and Technology Facilities Council (STFC) ISIS complex at Rutherford Appleton Laboratory near Oxford.

I

SIS is a world-leading materials research centre which produces beams of neutrons and muons that can delve into the complexity of matter using a suite of beamline instruments, which gives unique insights into the properties of materials on the atomic scale.

Pelloby were asked to come up with a lifting solution to give ISIS and the various research teams at the complex, suitable craneage access to these dead zone areas - the aim being to lift beamline instrument components, shielding and other materials in and out of the restricted crane access areas.

A series of three adjacent overhead cranes span the width of one of the two large ISIS experimental halls onsite that allow access to the various beam defining equipment areas.

However as the building’s capabilities were expanded to accommodate additional instruments, some of the new beam defining equipment areas were located in a ‘cranage dead zone’ which the existing overhead cranes couldn’t reach.

Working closely with STFC engineers, our designers set to work and the result was an inverted travelling jib crane which can traverse the length of the building along a 53 metre gantry support rail system, while also providing continuous 360 degree access in a five metre radius thanks to a powered rotating jib arm. This innovative modified travelling jib crane can support loads of up to five tonnes thanks to a Verlinde VT2 Eurobloc hoist.

MORE INFORMATION

As the crane needed to access awkward spaces, operators had to be able to carefully navigate it around obstacles such as building stanchions and existing machinery. It is therefore operated via an easy-to-use handheld radio control system which governs the longitudinal travelling motion, the jib arm rotation and the movement of the electrically powered short headroom Verlinde wire rope hoist. Anti-clash sensors were fitted to the jib arm, which means the system automatically 04 | Industry EMEA | April 2016

34

NEWS

Company Profile stops moving when it detects it is approaching another object.

This inverted travelling jib crane is a unique “one-of-akind” system and was made possible thanks to Pelloby’s innovative design capabilities and the versatility of Verlinde’s Eurobloc VT range. www.verlinde.com

Pelloby Ltd. are one of the UK’s leading crane manufacturers, having designed and produced reliable lifting equipment for use worldwide since 1968.

Their product range covers everything from simple hoists and small jibs, to large overhead and gantry cranes. They also produce bespoke special cranes and complex automated handling systems.

Dealing with both trade clients and end users directly, Pelloby project manage each order from quotation through to delivery, installation and final commissioning.

Pelloby also offer preventative maintenance contracts, operator training, inspections and breakdown support.

Call Pelloby on +44 (0) 1952 586626 or email sales@pelloby.com for a free quotation.

For more information visit: www.pelloby.com MORE INFORMATION 04 | Industry EMEA | April 2016

35

NEWS

PCVUE IS BTL LISTED FOR B-AWS

PcVue, the SCADA in the PcVue Solutions portfolio, keeps ensuring interoperability and open systems through certified implementations of open standards.

A

lready certified by DNV-GL (formerly Kema) for its IECÂ 61850 driver and BTL listed for its BACnet Operator Workstation profile (B-OWS), PcVue has now been recognized as a compliant BACnet Advanced Workstation (B-AWS) by the BACnet Testing Laboratory.

B-AWS allows the operator access to multi-vendor systems through a common workstation. The BACnet Advanced Workstation can be used to commission and operate a BACnet system, including modification of device configuration. All interoperability areas are covered, including Data Sharing, Alarm & Event notification, Trending, Event logging and Scheduling.

MORE INFORMATION

The BTL listing testifies of a product compliance to the BACnet standard, it is a requisite benchmark demanded in many specifications in order to be qualified to bid on a project. It ensures asset owners and facility managers they invest in a versatile open platform that meets their current and future needs.

04 | Industry EMEA | April 2016

36

With its branches, PcVue has been involved in the BACnet community for many years, it is part of the BIG-CA, BIG-EU and the BACnet International associations.

The official BTL Product listings is available here.

NEWS

NORD CHINA HAS WON “2015 INNOVATIVE PRODUCT AWARD” OF DRIVE INDUSTRY

“nsd tupH” sealed surface conversion system, which was showcased by Nord (China) Power Transmission Co., Ltd. at PTC Asia 2015, has been honored with the “2015 Innovative Product Award” for the drive industry, issued by MM MaschinenMarkt China.

N

ORD DRIVESYSTEMS manufactures long-time corrosion-resistant drives by means of the nsd tupH sealed surface conversion system, which ensures economic and effective corrosion protection, since this protection is also unaffected by blows or scratches.

The drives are tested and proven in applications with a maritime atmosphere. In demanding atmospheres, nsd tupH drives reliably perform much beyond the usual service life of paint-coated systems. Their resilience and prolonged service life significantly reduces the service and maintenance requirements placed on customers.

Nord has long been active around the world and has a history of 50 years as a manufacturer of drive technology. In China, the company has developed steadily for more than 10 years.

All NORD components, including gears, motors, and drive electronics with intelligent functions are developed and produced in.house. NORD supplies complete drive solutions in more than 100 industries. In the future, Nord will actively introduce more advanced technology from Germany to China, so as to promote the comprehensive development of China's intelligent drive solutions. www.nord.com

MORE INFORMATION

In addition, the treatment ensures high process safety: since no coating is applied, but the surface itself is hardened, there can be no pollution of products or process media, as is often the case for instance with chipping paint. Even heavy impacts or scratches do not diminish the corrosion resistance. nsd tupH is approved for food applications according to FDA Title 21 CFR 175.300, and is available for all aluminum-enclosed drive systems –four gearbox families, smooth-surface motors, and distributed drive electronic control units.

04 | Industry EMEA | April 2016

37