Technical Product Specifications Size
Colour
Coverage (m2 per litre)
Touch Dry (Hours)
Recoat (Hours)
2.5L, 750ml
White
4
2-3
16-24
750ml, 250ml
Black
16-18
4-6
16-24
Brick & Tile Paint
750ml
Matt Red
10
4-6
16-24
Stain Block Paint
750ml
White
10
0.5
4-6
2.5L, 750ml and 250ml
White, Black, Dark Grey, Dark Green and Tile Red
11
4-6
16-24
All Purpose Primer
750ml, 250ml
White
12
4-6
16-24
Quick Dry Primer Undercoat
750ml, 250ml
White
13
0.5
1-2
750ml
White
14
0.5
4-6
750ml, 250ml
White
12
4-6
16-24
750ml
Red Oxide
11
2-4
14-16
750ml, 250ml
White
12
Leave for at least 30 mins before turning on radiator to harden.
with heating on maximum and allow to cool.
750ml, 250ml
White, Black, Silver Gold (Gold 250ml only)
10
1
4
750ml
Black and Silver
10
0.5
1
Primers & Preparation
Floor Finishes
Matt Black
High Performance Floor Paint
Ceramic Tile & Melamine Primer Traditional Wood Primer
Metal Finishes
Traditional Red Oxide Primer Radiator Enamel Smooth Quick Dry Metal Paint Traditional Hammered Finish
2
Some stockists may not carry all Johnstone’s Speciality finishes and colours. To avoid disappointment, please consult your stockist prior to travelling. Every effort has been made to accurately reproduce colour but for technical reasons connected with colour reproduction and paint manufacture variations may occur. 11742
PPG Architectural Coatings UK Limited, Huddersfield Road, Birstall, Batley, West Yorkshire WF17 9XA. Telephone: 01924 354000 Facsimile: 01924 354001
Visit our website www.johnstonespaint.com for more inspiration.
Restoration
Please recycle this guide when you have finished with it.
Restoration
Damp Proof Paint
Floor Finishes
Primers & Preparation
Product and colour guide
Metal Finishes
Johnstone’s Speciality Product Guide
Restoration Brick & Tile Paint
Restoration
3-5
Damp Proof Paint Matt Black Brick & Tile Paint
Johnstone’s Speciality Paint provides a range of finishes for those specialist jobs. All of our products are formulated using Johnstone’s expert knowledge to give the best results for those demanding surfaces that require specialist attention.
Stain Block Paint
Floor Finishes
6
High Performance Floor Paint
Primers & Preparation Which PRODUCT?
HINTS & TIPS?
Confused by the range of Speciality products available?
To enable you to make the right product choice and to complete your job to the highest quality, our product guide includes:
Our colour coded product guide splits our range into easy to identify categories, making your product choice quick and easy every time.
7-9
All Purpose Primer Quick Dry Primer Undercoat Ceramic Tile & Melamine Primer Traditional Wood Primer Traditional Red Oxide Primer
Step-by-step guide: Restoring a damp interior wall using Johnstone’s Speciality Damp Proof Paint
• Photography showing product usage • Clear product benefits • Step by step guides for those tricky projects • Details of product sizes and colours available.
Metal Finishes Radiator Enamel Traditional Hammered Finish Smooth Quick Dry Metal Paint
10-11
Step 1
Step 2
Step 3
Ensure surface is clean, dry and free from loose and flaking material.
Apply an even coat of Johnstone’s Speciality Damp Proof Paint. Ensure affected area is covered completely.
Apply Johnstone’s Matt, Silk or Soft Sheet Emulsion to provide a decorative finish.
3
Restoration
Restoration Step-by-step guide: Covering a stain using Johnstone’s Speciality Stain Block Paint
Step-by-step guide: Creating a blackboard using Johnstone’s Speciality Matt Black
Step 1 Ensure, as far as possible, that initial stain is clean, dry and free from dust.
Step 1 Ensure surface is clean, dry and free from loose and flaking material. Stir well before use and apply Johnstone’s Speciality Matt Black by brush or roller, ensure a solid, even coat is applied. Apply a second coat if required.
Damp Proof Paint
Matt Black
Protects against damp stains, ideal for use on plaster, brickwork, cement and stone.
An attractive, non reflective matt finish for use on interior wood and metal surfaces.
• Formulated to inhibit mould growth and safeguard against damp seeping through decoration
• High opacity matt finish
• Can be used as a primer and sealer or on its own to achieve a matt finish
Brick & Tile Paint
Stain Block Paint
A protective paint for use on concrete, stone, brick, paving, unglazed tiles, roof tiles and slate.
Disguises and prevents the reappearance of unsightly stains.
• Restores and protects
• Contains unsightly stains caused by nicotine, smoke, marker pen, wax crayon and grafitti
• Retains original appearance even in hostile weather conditions
• Prevents the reappearance of stains that conventional emulsions won’t cover
• Interior & Exterior use
• Interior use
• Attractive matt finish
• Suitable for use on beams, panelling, doors, decorative iron work, stage scenery, dark rooms and blackboards • Interior use
• Can be applied to damp surfaces
Step 2 Stir well before use and apply Johnstone’s Speciality Stain Block Paint by brush or roller, ensure an even coat is applied, covering the stain and a surrounding area of approximately 20cm to ensure maximum containment.
• Interior use
Sizes:
2.5L
750ml
Sizes:
750ml
250ml
Step 2
Sizes:
750ml
Sizes:
750ml
Leave surface as a traditional blackboard finish.
White 4
Black
Step 3
Matt Red
White
Apply Johnstone’s Matt, Silk or Soft Sheen Emulsion to provide a decorative finish.
5
Floor Finishes
Primers & Preparation
High Performance Floor Paint Ideal for the renovation of garage floors, tiles and doorsteps. • Suitable for use on properly prepared tiles, brickwork, wood, concrete, cement and stone surfaces • Perfect for areas of high volume traffic • Interior use
Sizes:
2.5L
750ml
250ml
White
Black
Dark Grey
Dark Green
Tile Red 6
7
Primers & Preparation
Primers & Preparation Step-by-step guide: Preparing a wooden surface using Johnstone’s Speciality Traditional Wood Primer
Step 1 Prepare surface by sanding down with a fine waterproof abrasive paper, follow the flow of the grain to ensure no damage to the wood.
All Purpose Primer
Quick Dry Primer Undercoat
Ceramic Tile & Melamine Primer
Traditional Wood Primer
Traditional Red Oxide Primer
Ideal for multi surface preparation.
A multi surface product that reduces preparation time, by combining a primer and undercoat in one.
Bonds to glazed tiles and smooth surfaces giving excellent adhesion prior to painting.
A traditional primer for use on new & bare timber, suitable for both interior and exterior use.
A traditional anti corrosive primer, which consistently safeguards against rust.
Step 2
• Ideal for use on gates, railings and metal pipes
Apply Johnstone’s Speciality Traditional Wood Primer liberally and evenly by brush, paying particular attention to the end grain.
• Specially developed formula ideal for multi surface priming • Suitable for use on bare wood, metal and hardboard
• Suitable for use on bare timber and masonry surfaces
• Allows easy coverage with any matt or satin finish
• Easy, low odour application
• Will adhere to glazed kitchen and bathroom tiles, as well as smooth melamine surfaces such as kitchen unit doors
• Quick drying properties allow two or three coats to be applied in one day
• Quick drying and provides a suitable base for decoration
• Interior & Exterior use
• Interior Use
• Interior & Exterior use
Sizes:
750ml
250ml
Sizes:
750ml
250ml
Sizes:
750ml
• Protects, levels and fills uneven wood surfaces • Provides the perfect base for any gloss or satin finish • Interior & Exterior use
Sizes:
750ml
250ml
• Can be used as a primer, creating a level foundation over which gloss can be applied • Alternatively can be used as a decorative coating
Sizes:
750ml
Step 3
White 8
White
White
White
Red Oxide
Allow primer to dry and then apply relevant undercoat, ensuring even coverage, then cover with Johnstone’s Liquid Gloss. 9
Metal Finishes
Metal Finishes
Step-by-step guide: Preparing and painting a radiator using Johnstone’s Speciality Radiator Enamel
Step 1 Turn radiator off prior to painting and allow to cool. Clean and sand all surfaces. All loose and flaking material should be removed.
Step 2 Brush Johnstone’s Speciality Radiator Enamel carefully but briskly onto the cold radiator without overworking, the surface will level out readily to give an even, professional finish.
Radiator Enamel
Traditional Hammered Finish
Smooth quick dry metal paint
Hard wearing, heat resistant gloss enamel.
A high performance paint that provides an attractive imitation hammered metallic finish.
Quick drying, smooth finish suitable for all metal surfaces.
• Ideal for use on radiators and hot water pipes • A unique formula that ensures it will not fade or yellow
• Camouflages surface imperfections such as scratches and blemishes
• Internal use
• Provides a long lasting high gloss finish to metal surfaces
Sizes:
750ml
250ml
• Specially formulated for applying directly onto metal surfaces without the need for a separate primer or undercoat
• Anti corrosive properties
• Suitable for gates, railings, metal drainpipes or garden furniture
• Exterior use
• Exterior use
Sizes:
750ml
Sizes:
750ml
250ml
Step 3 After painting leave for at least 30 minutes and turn on radiator for 2 hours at maximum setting to fully harden the enamel. If a second coat is required, apply once the first coat has hardened and the radiator is completely cool. 10
White
Black
White
Silver
Silver
Black
Gold
(Gold only available in 250ml)
11