4-IJAEST-Volume-No-3-Issue-No-2-The-Applications-of-Weibull-Function-to-Partial-Discharge-Analysis-a by ISERP ISERP

A. S. Deshpande et al. / (IJAEST) INTERNATIONAL JOURNAL OF ADVANCED ENGINEERING SCIENCES AND TECHNOLOGIES Vol No. 3, Issue No. 2, 111 - 114

The Applications of Weibull Function to Partial Discharge Analysis and Insulation Ageing: A Review Research Scholar, Electrical Dept., VJTI, Mumbai, India asdamolsd@gmail.com

Dr. A. N. Cheeran

A. S. Patil

M. Tech Student, Electrical Dept., VJTI, Mumbai, India. abhi.patil03@gmail.com

contain characteristic features of the source/class of the respective partial discharge process involved. For this reason, PD pattern recognition is important for PD phenomena identification. Several techniques, such as neural networks method [2], fractals analysis [3] and centour score method [4] etc have been adopted for pattern recognition and PD phenomena identification [5-7]. In contrary with a deterministic approach, probabilistic analyses appear to be more appropriate to model the discharge behavior initiated from unknown sources. The diagnosis of insulation systems by PD analysis finds considerable support from stochastic processing of PD data. Both PD mechanisms and PD pattern identification can be inferred by appropriate stochastic models involving PD height (amplitude) and phase distributions. Analysis of Partial Discharge Height Distribution (PDHD) patterns may provide characteristic statistical parameters to determine the discharge source as well as the degradation process. Different types of PD sources produce different types of PDHD patterns. Proper interpretation of the observed discharge patterns, for e.g. online PD monitoring, can be used to determine the discharge source, i.e. defect type as well as the physical phenomena behind it.

Abstractâ&#x20AC;&#x201D; Partial Discharge (PD) is a locally confined electrical breakdown within the high voltage insulating system that only partially bridges the distance between two electrodes. PD from different sources produce different PD pulse height distribution (PDHD) patterns. PD source/type identification is approached by resorting to the stochastic analysis of PDHD shape. PDH data resulting from a single PD source and multiple sources are often characterized using the Weibull distribution. Moreover, the mixed weibull distribution is also applied to multiple defects and is found successful to assess electrical ageing progression of insulation systems. The shape and scale parameter of the weibull function are important for the characterization of the type of PD phenomenon and hence the PD identification and life-time analysis. A comprehensive survey of PD analysis using weibull distribution with respect to PD source identification, insulation ageing, reliability analysis etc has been presented in this paper. The survey shows that, much of the work has been carried out on model voids. Research has to be extended to obtain a figure of merit for PD of single and multiple discharges and for complex PD patterns observed in practical insulation systems.

Professor, Electrical Dept., VJTI, Mumbai, India ancheeran@vjti.org.in

A. S. Deshpande

IJ A

Keywords- High Voltage Insulation, Weibull Distribution, Partial Discharge, Electrical insulation aging, Reliability.

I. INTRODUCTION Electrical discharge which do not completely bridge the electrodes, are called partial discharge (PD). PD may occur internal to insulation, or on the surface or at sharp points & corners called as corona discharges. A PD phenomenon is a complex stochastic process because it exhibits significant statistical variability in properties like pulse amplitude, shape, and time of occurrence [1]. Even though PD is localized to a particular region and is self-quenching, it usually causes progressive deterioration of the insulation which may eventually lead to breakdown. PD detection and diagnosis is thus an important tool for quality assessment electricalinsulation. It is considered as an indicator of insulation integrity and performance. It is very commonly seen in practical insulation systems, that there are more than one PD sources acting simultaneously. The patterns obtained with PD detectors

ISSN: 2230-7818

The Weibull distribution is one of the most widely used lifetime distributions in reliability engineering and also most popular for modeling stochastic deterioration [8]. Research shows that the Weibull distribution provides a potential model to quantify the characteristics of the observed patterns [9, 10]. The parameters of the Weibull function can be related to the PD standard quantities and can constitute a useful tool for the identification of different PD phenomena [9]. Contin, et. al. [11] used Fuzzy classifiers for classification of PD signals. The feature vector was constructed by including Weibull parameters. This classifier resulted in a cluster of signals homogeneous in terms of stochastic features of the PD pulses.

Page 111

A. S. Deshpande et al. / (IJAEST) INTERNATIONAL JOURNAL OF ADVANCED ENGINEERING SCIENCES AND TECHNOLOGIES Vol No. 3, Issue No. 2, 111 - 114

This paper initially discusses the PD phenomena identification and separation. Remaining sections discuss about different aspects of PD analysis with the use of weibull distribution. II.

Equation (1) is characterized by 2 parameters, that is, α and β, while the additive model (eq.(3)) is characterized by 5 parameters, that is, α1, α2, β1, β2 and probability p.

PD PHENOMENA IDENTIFICATION USING WEIBULL DISTRIBUTION

The PDH values resulting from a single PD source can be characterized by the two-parameter Weibull function. Equations (1) and (2) are the expressions of the cumulative distribution and the probability density function for two parameter weibull function. (1)

Here α and β are the scale and shape parameters, and q is the charge magnitude. The quality of fitting the twoparameter weibull distribution for the PD originating from single source is as shown in fig. 1 [9]. The quality of fit can be verified by means of appropriate tests like Cramer-von-Mises test.

(2)

Fig.2 Weibull distribution applied to PDH data for multiple PD sources.

PD ANALYSIS USING SHAPE AND SCALE PARAMETERS OF WEIBULL FUNCTION

III.

IJ A

The estimation of the Weibull parameters enables calculation of standard average quantities used for PD analysis such as mean, integrated charge height per cycle, mean number of discharges per cycle, mean value of charge height transferred by each pulse, maximum discharge height etc [9, 10, 12]. The parameters of the weibull function, α and β, can be estimated by the means of Maximum Likelihood Method and Least Square Method. Based upon the values of β, the type of discharge can be interpreted [10,12-15]. Thus, β parameter can be used to distinguish and study different types of discharges.

Fig. 1 Weibull distribution applied to PDH data for a single PD source.

When two types of PD phenomena are active simultaneously occurring in voids inside the insulation, deviations from the two-parameter Weibull function generally is observed as shown in fig 2 [9]. The behavior displayed by fig. 2 was explained by the appearance of a second PD phenomenon superimposing on the previous one. Five parameter Weibull distribution fits well for such discharges, whose cumulative distribution is given by, F(q) = p. F1(q) + (1-p).F2(q)

(3)

where q is the charge magnitude and Fl(q) and F2(q) are the cumulative distributions of the two sub-populations (the expressions of Fl(q) and F2(q) are given by eq.(l)).

Fig. 3 and 4 [16] shows the variation of the scale and the shape parameters with respect to applied voltage. These results show clearly the PD phenomena separation. Nimbole et. al., 2008 [17] presents a diagnosis of insulation using linear prediction method. Long term prediction of future of α and β for different samples over time was studied and analyzed. The performance is compared with Artificial Neural Network and shown that the neural network model is less efficient in predicting the shape and scale parameter in comparison with linear predictive model. Application of weibull distribution along with gives more precise results for identifying PD of different types with the help of the scale parameter (α) and shape parameter (β) and some statistical parameters like skewness and kurtosis [18, 19]. The Weibull-like function also provides the best performance in terms of quality of fit, separation and identification of single and combined PD sources [13]. IV.

INSULTION DEGRADATION AND AGEING

The ageing of dielectrics is characterized by an irreversible deterioration and it affects the performance and lifetime of the

ISSN: 2230-7818

Page 112

A. S. Deshpande et al. / (IJAEST) INTERNATIONAL JOURNAL OF ADVANCED ENGINEERING SCIENCES AND TECHNOLOGIES Vol No. 3, Issue No. 2, 111 - 114

equipment. So monitoring of electrical ageing is also an important issue in high voltage insulation systems. Diagnosis of insulation ageing is carried out by studying the variations of both the probability function parameters (ď Ą and ď ˘) and the standard average quantities with ageing time and/or voltage [10]. Figure 5 [10] shows the time behavior of the shape and scale parameter of the Weibull function, for positive (+) and negative (-) discharges, relevant to a sample specimen. Scale parameter increase with ageing time, whereas, the shape parameter decreases for both positive and negative discharges as seen in Fig. 5.

LDA) etc. These methods are used along with weibull distribution for evaluation of degradation of electrical tree [21].

Fig. 5 Time behavior of the shape and scale parameter of the Weibull function, for positive (+) and negative (-) discharges, relevant to a sample specimen.

Moreover, it is necessary to apply different strategies in the form of condition-based maintenance for reliability analysis. Asset managers are in need of tools to assist them in decision making on appropriate replacement and/or maintenance strategies. Figure 6 illustrates such an approach to manipulate acquired data for condition based maintenance [22].

IJ A

Fig. 3 Behavior of the shape parameter derived from combined and single PD tests, as function of applied voltage (Positive polarity).

Fig. 6 Data manipulation for condition based maintenance. CONCLUSION

Fig. 4 Behavior of the scale parameter derived from combined and single PD tests, as function of applied voltage (Positive polarity).

Weibull distribution is a powerful tool for PD identification and to assess insulation ageing. An attempt has been made to review work done in PD analysis using weibull distribution till today and to discuss different analytical aspects of PD which can be studied using weibull.

M. Nedjar et. al., 2007 [20] investigated electrical ageing of polyurethane under AC voltage. This material is used as insulating material in the electrical machines. Weibull statistical analysis of the time to breakdown was performed to govern the degradation of polyurethane caused by partial discharges.

The parameters of the Weibull function, can be correlated to the PD activity and constitute a useful tool for insulation diagnosis based on PD measurements. Shape parameter is one such identification index which is invariant with the PD source location in the insulation system.

Since reliability, life-time, condition monitoring have become hot and essential topics now-a-days, some recent work brings new methods in picture like multi layer perceptions (MLP-BP), adaptive neuro-fuzzy inference system (ANFIS), principle component analysis-linear inference system (PCA-

ISSN: 2230-7818

From this review, the authors came to a conclusion that weibull functions can be used successfully for single and multiple PD source detection. The work done till now is mostly carried out on model voids, using some experimental set up. More work needs to be carried on practical experimental data obtained on high voltage machines like transformer, rotating

Page 113

A. S. Deshpande et al. / (IJAEST) INTERNATIONAL JOURNAL OF ADVANCED ENGINEERING SCIENCES AND TECHNOLOGIES Vol No. 3, Issue No. 2, 111 - 114

machines etc. Also, there is a need to study variation in values of alpha and beta for different types of discharges found in such machines like slot discharge, delamination, gap discharge, end winding discharge etc. Use of Neural Networks along with weibull function can prove even better for PD pattern recognition. There is a possibility to get some fruitful results using weibull distribution in conjunction with Pulse Sequence Analysis which will help for physical interpretation of discharges.

[14] M. Cacciari, A. Contin, G. Rabach, G. C. Montanari, “Diagnosis of

Emphasis should be given to diagnosis of insulation systems with regard to hazard function, reliability etc, to monitor failure rate and life time of any high voltage equipment/system.

and Separation of Two Concurrent Partial Discharge Phenomena”, IEEE

REFERENCES

Pulse Height Distribution Parameters using Linear Prediction Method”,

IEEE Transactions on Electrical Insulation Vol. 28 No. 5, pg.902-948, Oct. 1991. [2] N. Hozumi, T. Okamoto, T. Imajo: "Discrimination of Partial Discharge Patterns Using a Neural Network", IEEE Trans. on Electrical Insulation, Vo1.27, N.3, pp.550-556, June 1992. [3] A. Krivda, E. Gulski, L. Satish, W. S. Zaeng1: "The Use of Fractal Features for Recognition of 3-D Discharges", IEEE Trans. on Dielectrics and [4] A. Krivda: "Automated Recognition of Partial Discharges", IEEE Trans.

on Dielectrics and Electrical Insulation, V01.2, No.5, pp.796-821, October 1995.

[5] F, H , Kreuger, Partial Discharge Detection in HV equipment, pp, 19-21, London Butterworth, 1989.

[15] A. Contin, E. Gulski, M. Cacciari, G. C. Montanari, “Applications of the Weibull Function to Partial Discharge Data Coming from Different Sources Typologies”, IEEE-CEIDP 95 Annual Report, pp335-338, 1995. [16] M. Cacciari, A. Contin, G. Mazzanti, G. C. Montanari, “Identification Conference on Electrical Insulation and Dielectric Phenomena, San Francisco, pp.476-479, 1996. [17] V. Nimbole, V. Lakdawala, P. Basappa, “Prediction of Partial Discharge Conference on Electrical Insulation Dielectric Phenomena, pp.337-340, 2008 [18] R. Candela, G. Mirelli and R. Schifani, „„PD Recognition by Means of Statistical and Fractal Parameters and a Neural Network‟‟, IEEE Trans. Dielectr. Electr. Insul., Vol. 7, pp. 87_94, 2000. [19] A. Contin, A. Cavallini, G. C. Montanari, C. Hudon, M. Belec, D.N. Nguyen, “Searching for Indexes Suitable for Rotating Machines Diagnosis”, IEEE International Symposium on Electrical Insulation, pp.101-105, 2006. [20] M. Nedjar, A. Beroual, “Aging under AC voltage of polyurethane by using Weibull statistic”, International Conference on Solid Dielectrics, UK, pp.654-657, 2007.

[21] Seong-Hee Park, Hae-Eun Jung, Jae-Hun Yun, Byoung-Chul Kim, Seong-Hwa Kang, Kee-Joe Lim, “Classification of Defects and Evaluation of Electrical Tree Degradation in Cable Insulation Using Pattern Recognition Method and Weibull Process of Partial Discharge”, International Conference on Condition Monitoring and Diagnosis, China, 2008.

[6] J. E. Lyles, G. C. Stone and M. Kurtz, "Experience with PDA Diagnostic

testing on Hydraulic Generators”, IEEE Trans. On Energy Conversion, Vol-3, No.4, pp.824-830, December 1988.

419, Pocono, USA, October 1993.

Electrical Insulation, V01.2, N.5, pp.889-892, October 1995.

of multi-discharge phenomena” , IEEE-CEIDP 93 Annual Report, pp. 414-

[1] R. J. Van Brunt, “Stochastic Properties of Partial-discharge Phenomena”,

practical insulation systems by partial discharge measurements in the presence

[22] Mousavi Gargari, S., Wouters, P. A. A. F., Wielen, P. C. J .M. van der, Steennis, E., “Statistical analysis of partial discharge patterns and knowledge extraction in MV cable systems”,

[7] G C. Stone, "The Use of Partial Discharge measurements to assess the

Proc. International Conference on

Probabilistic Methods Applied to Power Systems, Puerto Rico, 2008.

conditions of Rotating Machine Insulation”, IEEE Electrical Insulation

IJ A

Magazine, No.4, July/August 1996, pp.23-27.

[8] Maxim Finkelstein, “Failure Rate Modelling for Reliability and Risk”, Springer Series in Reliability Engineering ISSN 1614-7839, 2008.

[9] M. Cacciari, A. Contin and G. C. Montanari, „„Use of a Mixed Weibull Distribution for the Identification of PD Phenomena,‟‟ IEEE Trans. Dielectr. Electr. Insul., Vol. 2, pp. 1166-1179, 1995.

[10] M. Cacciari, A. Contin, G. Rabach and G. C. Montanari, „„An Approach to Partial Discharge Investigation by Height Distribution Analysis‟‟, IEE Proc.: Sci., Meas. Technol., Vol. 142, pp. 102-108, 1995.

[11] A. Contin, A. Cavallini, G. C. Montanari and G. Pasini, „„Digital Detection and Fuzzy Classification of Partial Discharge Signals,‟‟ IEEE Trans. Dielectr. Electr. Insul., Vol. 9, pp. 335-348, 2002.

[12] A. Contin, G.C. Montanari, C. Ferraro, “PD Source Recognition by Weibull Processing of Pulse-Height Distributions”, IEEE Transactions on Dielectric and Electrical Insulation Vol. 7No. 1,pp.48-58, 2000. [13] A. Contin, G. Contessotto, G. C. Montanari, M. Cacciari, “Comparing Different Stochastic Models for the Identification and Separation Of concurrent partial discharge phenomena,” IEEE conf. Dielectric Materials, Measurements and Applications, No. 473, pp.374-379, 2000.

ISSN: 2230-7818

Page 114