Line LED is a flexible, small profile energy efficient LED strip for indoor damp locations. Sold by the foot in 16 feet reels,it can go up to 20 feet before re-feeding. Comes standard with 1 foot lead wires. Custom lead wires up to 6’ long are available. Operating voltage: 12 VDC Operating temperature: -400F ~ 1400F (-400C ~ 600C) Average life: 50,000 hours Beam Angle: 1200 Dimmable: Yes (PSD series power supply required) Mounting: 3MTM self-adhesive tape. Mounting to an aluminum profile or to the HST aluminum heat sink tape is required to reach the rated 50,000 hours average life (LL1.4 excluded) Approvals: ETL damp listed.
LINE LED
LINEAR LED STRIP
Applications: Indoor only. Under/above cabinet, cove lighting, counter accent, architectural accents, under banisters, display and book cases.
Models:
LL1.4
LL2.3
LL2.9
LL4.4
LEDs/ft:
18
29
36
18
Cut marks:
2”
1.25”
1”
2”
Power consumption:
1.4 watt/ft
2.3 watt/ft
2.9 watt/ft
4.4 watt/ft
Light output:
72 lumens/ft
119 lumens/ft
145 lumens/ft
198 lumens/ft
Color temperature:
2900K/3500K
2900K/3500K
2900K/3500K
2900K/3500K
Dimensions:
H: 1/16” W: 5/16”
H: 1/16” W: 5/16”
H: 1/16” W: 5/16”
H: 1/16” W: 7/16”
Connectors and custom configurations are available. Please see accessories page or consult factory.
Ordering code:
Model LL1.4
Color 29K
CRI S
Length
LL1.4 LL2.3 LL2.9 LL4.4
29K - 2900K 35K - 3500K
S - standard H - high
1-16'
Lighting for the future, today.
www.luminii.com
224-333-6033
Lighting for the future, today.
LineLED 24V Linear LED strip - 24 VDC
Operating voltage 24 VDC
The LineLED is a small profile and energy efficient light strip. It is easily installed directly on to the mounting surface with double sided tape or within discrete mounting extrusions. The durable but flexible circuit board and multiple connector options enable the extension of the light strip and the perfect fit for every application.
Operating temperature - 40˚F to 140˚F (- 40˚C to 60˚C) Average life 50,000 hours Mounting LLED strip is equipped with 3M self-adhesive tape. The strip must be adhered to either a Luminii aluminum profile or an unpainted aluminum surface. For other surfaces the HST Aluminum heat sink tape will be required to reach the rated 50,000 hours average life
Applications: Indoor only - above and below cabinets, cove lighting, counter accent, architectural reveals, under banister, display and book cases, etc.
Approvals Class 2 damp listed dimmable
Technical information MODELS
LL18
LL30
LL36
LLX18
LLX22
LEDs/ft
18
30
36
18
22
Light output of 2900 K with high CRI
121 lum/ft 218 lum/ft 243 lum/ft 361 lum/ft
Average power consumption (for 15’ section)
1.5 W/ft
2.5 W/ft
3.0 W/ft
4.3 W/ft
4.6 W/ft
Ordering increment
4.00”
2.50”
2.00”
4.00”
1.13”
Maximum run length
100 ft
48 ft
39 ft
25 ft
23 ft
Dimensions
0.38” W 0.05” H
0.44” W 0.09” H
0.38” W 0.06” H
0.38” W 0.09” H
0.39” W 0.13” H
SECTION START/END OPTIONS Female connector
430 lum/ft
Male connector
Soldered leads (72”)
No connector
Ordering code MODEL
LL18 LL18 LL30 LL36 LLX18 LLX22
CRI
S S - Standard H - High
COLOR TEMPERATURE
22K 22K - 2200K* 27K - 2700K 29K - 2900K 30K - 3000K 34K - 3400K** 41K - 4100K**
SECTION START
SECTION END
LENGTH
F F - Female connector M - Male connector SL - Soldered lead wires (72”) NC - No connector
M F - Female connector M - Male connector SL - Soldered lead wires (72”) NC - No connector
view table above for increment options and maximum run limits
*2200 K only available with standard CRI (S) **3400 K and 4100 K only available with high CRI (H) REV3.7
page 1 of 5
www.luminii.com
tel: 224-333-6033