ITAKAshop catalog - EN by ITAKAshop

ITAKAshop CATALOGUE N째21 - EQUIPMENT & ACCESSORIES KARTING - ITAKASHOP.COM

CONTENTS 02

140

INTRODUCTION

ENGINES

LUBRICANTS / MAINTENANCE PRODUCTS

02 The ITAKAshop competences 03 The choice of the most well-known brands 04 Practical guide

06 EQUIPMENT

08 Suits 14 Gloves 16 Shoes 18 Helmets and accessories 23 Rain equipment 24 Mechanic equipment 26 Sodi sportswear 30 Rotax sportswear 32 Protections for driver 34 Neck brace 35 Underwear

80 82 83 84 87

Rotax engines Iame engines TM engines Honda engines SA engines

88 ENGINE SPARE PARTS

90 Rotax Max Racing / J 125 Max / MiniMax /MicroMax engine spare parts 96 Rotax DD2 engine spare parts 102 IAME Parilla-X30 engine spare parts 106 TM KZ10 / KZ10B / KZ10ES engine spare parts

110 PERIPHERICAL ENGINE PARTS

36 CHASSIS PARTS

38 Bodywork 42 Seats and accessories 46 Steering wheels 48 Wheel rims 54 Hubs 58 Shafts and woodruff keys 59 Roller bearings and roller bearings brackets 60 Transmissions 66 Disks 67 Disk carriers 68 Brake kits 69 Brake calipers 70 Brake pads 71 Various brake parts 72 Tanks 75 Nuts and bolts 76 Stub axles - Ball joints - Tie rods 77 Pedals and accessories

112 Radiators and cooling accessories 114 Air boxes 116 Spark plugs and accessories 118 Batteries and accessories 120 Carburettors 122 Exhausts 124 Engine brackets and engine mounts flange

126 TOOLS

128 Tools for karts 131 Tools for tyres 134 Tools for engines

NO BINDING PICTURES, TEXTS AND ILLUSTRATIONS Subject to any changes (Prices, products etc.)

142 Oils 144 Maintenance products

148 ACCESSORIES

150 Data acquisition 153 Measure instruments and cameras 154 Race numbers and plates 155 Kart accessories and various 156 Trolleys

158 TYRES

160 Mojo tyres 163 Bridgestone tyres 164 Vega tyres 165 Vega and Komet tyres 166 Lecont tyres and studded tyres 167 Rental - Leisure tyres

168 TRACK EQUIPMENT 170 Electronic 172 Track accessories 173 Paddock tents

174 GENERAL INFORMATION 174 Index 176 General Sales Conditions

GRAPHIC DESIGN :

THE WORLD LEADER EFFICIENCY AT CUSTOMERS’ SERVICE !

Established in 1991 ITAKAshop is the trade name of Sodikart. “The World Leader in Karting” has been successfully asserting its position on a daily basis as the No. 1 specialist in the sale of karting equipment and accessories. ITAKAshop offers the widest range of karting equipment, spare parts and accessories with over 8,000 references in stock. Equipped with a 10,000m2 warehouse in Nantes, ITAKAshop dispatches several hundred packages each and every day. ITAKAshop aims to offer the best choice and the best price on its products to guarantee total satisfaction and provide an optimal service and high quality advice to both private individuals and professionals alike.

Over 8 000 references in stock

ITAKASHOP - ALL THE LEADING KARTING BRANDS IN ONE PLACE

L'AUTONOMIE SUR LES CIRCUITS

PRACTICAL GUIDE ORDERING

SHIPMENT

BY INTERNET: www.itakashop.com The easiest, quickest and most efficient method 24 hours a day, seven days a week. Secure payment. Shipment to suit your schedule. Easy to find promotions. BY PHONE +33 (0)2 40 38 26 20 From Monday to Friday from 10:00 a.m.to 12:00 a.m and from 2:00 p.m to 6:00 p.m.

FOR PRIVATE INDIVIDUALS Metropolitan France: STANDARD : Chronopost or UPS for 12 EUR Orders are delivered within 48 hours to home or pick up point. EXPRESS : Chronopost or UPS for 16 EUR Orders received before 4:00 pm can be delivered within 24h to home or pick up point. Other destinations: Please see website for more details.

BY EMAIL contact@itakashop.com

FOR PROFESSIONAL CUSTOMERS Refer to your usual conditions.

BY THE NATIONAL ITAKASHOP NETWORK Visit our website: www.itakashop.com AND BY POST ITAKAshop, ZA les Hauts de Couëron, BP 60, 44220 COUËRON - France

PAYMENT METHODS Credit card Cheque Bank transfer

AFTER-SALES SERVICE CALL THE AFTER-SALES SERVICE AT +33 (0)2 40 38 26 20 From Monday to Friday from 10:00 a.m.to 12:00 a.m and from 2:00 p.m to 6:00 p.m. MONEY-BACK GUARANTEE If you change your mind once you have received your goods you have 14 days to return them*. The goods must be returned complete, unused and in the original packaging accompanied by the original delivery note (see general terms and conditions of sale on page 176). *Does not apply to professional customers

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

EQUIPMENT 08 Suits 14

Gloves

16 Shoes 18

Helmets and accessories

23 Rain equipment 24 Mechanic equipment 26 Sodi sportswear 30 Rotax sportswear 32 Protections for driver 34 Neck brace 35 Underwear

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

SUITS

APPROVED

BOX’S BKX SUIT

BOX’S BKS SUIT

REF: EQ701.02T Very comfortable driver’s suit ideal for both leisure and racing. Excellent value for money. Cordura outer layer very resistant and pleasant to wear. 100% cotton inner lining. Lumbar accordion panel enhances ease of movement when driving. Wrist and ankle cuffs provide a snug fit and help prevent unwanted movement of the suit. Shoulder gussets to enhance driving comfort. Two flat pockets. White and black colours with red inserts.

REF: EQ701.00T Very comfortable driver’s suit ideal for both leisure and racing. Excellent value for money. Cordura outer layer very resistant and pleasant to wear. 100% cotton inner lining. Lumbar accordion panel enhances ease of movement when driving. Wrist and ankle cuffs provide a snug fit and help prevent unwanted movement of the suit. Shoulder gussets to enhance driving comfort. Two flat pockets. Black colour with red inserts and seams.

Child sizes: 110 - 120 - 130 - 140 - 150 • Adult sizes: from 48 to 62

Raised collar

CIK-FIA LEVEL 2

See suit size guide on page 12

APPROVED

SIZE GUIDE

Shoulder gussets

Lumbar elastic panel

Raised collar

Handy pockets

Knitted wrist and ankle cuffs

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

APPROVED

CIK-FIA LEVEL 2

SIZE GUIDE

APPROVED

See suit size guide on page 12

D 2

KIDS

ALPINESTARS K-MX 1 SUIT

REF: EQ701.23T The K-MX 1 is Alpinestars premium karting suit. This suit incorporates a light and abrasion-resistant Cordura main shell and extensive perforated panels for superb ventilation. With a fully floating arm construction, an extensive rear stretch panel and a reinforced panel on the right arm specially developed for karting, the K-MX 1 is built for performance and protection. Low profile collar for added convenience and comfort. Elastic foot loop ensures a secure fit. Black colour with yellow fluo seams. Sizes: from 40 to 60

ORDER ON-LINE ON WWW.ITAKASHOP.COM

ALPINESTARS K-MX 5 SUIT

ALPINESTARS K-MX 9 SUIT

REF: EQ701.34T / EQ701.56T The K-MX 5 is a fully featured kart racing suit that derives many technical innovations from Alpinestars range of premium auto racing suits. The K-MX 5 combines comfort and performance fit with a semi-floating arm construction and rear stretch panel on the back for excellent levels of movement and a three-layer main shell with moisture-wicking lining. Adjustable collar and waist belt allows a customized fit. Two flat pockets.

REF: EQ701.48T / EQ701.28T The K-MX 9 is a high quality technical kart suit, with three layer construction and a sleek design for entry and advanced level racers. Poly-toweling lining offering excellent moisture-wicking. Mesh panels positioned on under arms, seat area, sides, waist, bottom leg for maximum ventilation. Lumbar stretch panel for greater flexibility and a flat profile. Adjustable collar and waist belt allows a customized fit. Two flat pockets.

1 Colours: Grey and red Ref: EQ701.34T Child sizes: 120 - 130 - 140 - 150 Adult sizes: from 40 to 60

3 Colours: Black and grey Ref: EQ701.48T Child sizes: 120 - 130 - 140 - 150 Adult sizes: from 40 to 60

2 Colours: White and blue Child sizes: no available Adult sizes: from 40 to 60

4 Colours: Black and orange Ref: EQ701.28T Child sizes: no available Adult sizes: from 40 to 60

CONTACT THE NEAREST ITAKASHOP STORE

Ref: EQ701.56T

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

SUITS

SIZE GUIDE

See suit size guide on page 12

APPROVED

CIK-FIA LEVEL 2 APPROVED

OFFICIAL SODI SUIT

REF: EQ701.54T Thanks to the partnership between Alpinestars and the Sodi Official Team, this racing suit benefits from the know-how of the prestigious brand Alpinestars. Top end racing suit, light and comfortable, that derives many technical innovations from Alpinestars range of premium auto racing suits. Construction: High performance nylon outer layer for

superior durability and abrasion resistance. Poly-mesh panels and lining to enhance driving comfort and increase ventilation performance. Ergonomic fit: Innovative fully floating arm for maximum flexibility around the shoulders while driving. Stretch inserts around the lumbar area enhance flexibility and help maintain the suitâ&#x20AC;&#x2122;s fit.

Comfort: Knitted wrist and ankle cuffs provide a snug fit and help prevent unwanted movement of the suit. Adjustable collar and waist belt allows a customized fit. Two flat pockets. Official Sodi embroideries on the chest, collar, legs and back. Official Alpinestars embroideries on shoulders, sleeves and back. Sodi Official Team colours.

Child sizes: 130 - 140 - 150 â&#x20AC;˘ Adult sizes: from 42 to 60

Adjustable collar

Adjustable belt

Embroidered shoulder pads

Embroidered logos back

Embroidered flat pockets

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

Lumbar area

SPECIFIC RENTAL KART

SIZE GUIDE

See suit size guide on page 12

BOX’S PRO RT SUIT

REF: EQ701.10T Purpose-built for an intensive use by the professional of rental market, this suit combines style and comfort, just like racing models. Material: Cotton/polyester mix. Finition: Elastic strips on each side at the top of the sleeves for improved freedom of movement.

Wide Velcro strips on the collar, belt and ankles for extremely quick dressing/undressing. Reinforced stitching. Two-way zipper. Colour: Black with light-gray and dark-gray strips. Quick size identification: 1 shoulder pad = 1 size.

SIZES XXS XS S M

White Orange Yellow Light gray

L XL XXL XXXL

Green Red Sky Blue Black

R3 BOX’S HELMET:

The BOX’S R3 helmet size guide on page 21 One colour per size ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

Ankle velcro strips

SHIPMENTS WITHIN 24H (see the practical guide page 4)

Belt velcro strips NEED SOME HELP ? +33 (0)2 40 38 26 20

SUIT SIZE GUIDE SUITS BKS / BKX

SIZE

110

MINI (CM)

105 115 125 135 145 155 169 171 176 179 181 185 188

120

130

140

150

MAXI (CM) 115 125 135 145 155 169 179 182 185 189 191 195 198 WEIGHT (KG)

15-20 20-25 25-30 30-40 40-50 50-60 60-70 70-78 78-84 84-90 90-96 96-102 103-108

SIZE

120

MINI (CM)

117 127 137 147 148 152 155 158 165 170 173 177 182 185 187

130

140

150

MAXI (CM) 126 136 146 156 154 157 163 170 175 180 183 187 190 195 198 WEIGHT (KG)

24-32 31-37 36-44 43-49 45-50 50-60 54-60 60-66 66-72 72-78 78-84 84-90 90-96 96-102 103-108 PRO RT RENTAL

SIZE

XXS

MINI (CM)

145 155 160 162 170 175 180 185

XXL

XXXL

MAXI (CM) 155 165 168 170 180 190 190 195 WEIGHT (KG)

35-45 45-55 50-60 60-70 70-80 80-85 85-95 95-100

RAIN SUITS TRANSPARENT

SIZE

KID S

KID M

XXS

XXL

MINI (CM)

120 130 140 150 157 170 175 180 185

MAXI (CM) 130 140 150 157 170 180 185 190 195 WEIGHT (KG) 25-30 30-40 40-50 45-50 50-65 65-75 75-85 80-90 90-110

RIBS PROTECTOR ALUMINIUM

SIZE K 0 1 2 3 MINI CHEST SIZE (CM) 68 77 87 96 105 MAXI CHEST SIZE (CM) 77 87 96 105 114

BIONIC

SIZE JUNIOR ADULT S-L ADULT XL-XXXL MINI CHEST SIZE (CM) 56 81 105 MAXI CHEST SIZE (CM) 82 104 124

SPK-7

SIZE MAXI CHEST SIZE (CM)

XXS XS S M L XL 84 90 97 106 109 116

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

GLOVES GLOVES SIZING

XXS XS S M L XL XXL

< 16 cm 16 cm 18 cm 21 cm 24 cm 27 cm > 27 cm

BGX 2.0 BOX’S GLOVES

REF: EQ721.13T The same gloves as used by car racing drivers, the BOX’S BGX 2.0 gloves are preformed and offer exceptional control. Suede palm and top-stitched reinforcements. External seams for exceptional comfort. Wrist tightening by velcro strip. Sizes: from XS to XXL • 1 colour: Black and white

Q2 BOX’S GLOVES

REF: EQ721.23T Driver’s gloves; a product of automobile technology. Suede palm and top-stitched reinforcements. External seams for exceptional comfort. Wrist tightening by velcro strip. Particularly well suited for long races.

PREMIUM BOX’S GLOVES

REF: EQ721.18T Very supple gloves with leather palms at very attractive prices. Sizes: M and XL • 2 colours: Black - Red

Sizes: from XXS to XL • 2 colours: Black - Red 14

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

ADULT KID 2

ALPINESTARS TECH 1-K RACE GLOVES

ALPINESTARS TECH 1-KX GLOVES

REF: EQ721.501T / EQ721.54T / EQ721.61T Strong and comfortable double thickness gloves with pre-curved finger. Synthetic leather palm with silicon surface to improve grip. Open mesh fourchettes promote efficient moisture wicking and temperature regulation.

REF: EQ721.57T Two-layer stretch poly-cotton gloves with pre-curved finger. Grip treatment on palm with silicon surface and synthetic leather patches to improve driving feelings. Internal 3D injected pattern improves comfort and grip while driving. External seams.

1 1 colour: Black and white Child sizes: XXS - XS Ref: EQ721.501T Adult sizes: from S to XXL Ref: EQ721.54T

Sizes: from S to XXL - 1 colour: Black and yellow fluo

2 1 colour: Black and orange Child sizes: no available Adult sizes: from S to XXL

Ref: EQ721.61T

GLOVE SIZES

XXS XS S M L XL XXL

< 16 cm 16 cm 17-18 cm 19-20 cm 21-22 cm 23 cm 24 cm

ALPINESTARS TECH 1-K GLOVES

REF: EQ721.58T / EQ721.60T / EQ721.59T Two-layer stretch poly-cotton gloves with pre-curved finger. Synthetic leather patches on palm, backed with memory foam to enhance grip and shock dissipation. Mesh fourchettes provide greater airflow while driving to improve comfort. Sizes: from S to XXL â&#x20AC;˘ 3 colours: White and blue - Black and orange - Grey and red ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

SHOES ADULT KID

Kid’s karting model, from shoe size 31.

BLACK Q2 BOX’S SHOES

REF: EQ751.51T Good value for money. Light driver shoes, highly comfortable suede. Top-stitched reinforcements for greater strength. Thin non-slip sole for pedal sensitivity and grip, in both wet and dry conditions. Protective heel reinforcement pad. Tightening tab with velcro fastener. Sizes: from 31 to 46 • 1 colour: Black

ALPINESTARS TECH 1-K START SHOES

The Tech 1-K Start is an extremely lightweight shoe, offering optimized levels of abrasion-resistance, comfort and performance. Strategically positioned perforation zones for enhanced cooling performance and maximized airflow. Durable lace closure system. Lightweight rubber compound sole with textured grip and improved pedal feel in race conditions. Sizes: from 34 to 46 16

1 BLACK AND WHITE 2 BLACK AND RED

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

Ref: EQ751.84T Ref: EQ751.82T

D C

KIDS

ALPINESTARS TECH 1-K S SHOES

REF: EQ751.682T Driver’s shoes specifically designed for the younger kart racer, comfortable and light. Ultra-thin sole constructed from an exclusive rubber compound for greater grip in both wet and dry conditions. Durable lace closure system and Velcro strap offers safe and secure fitting. 2 Child sizes: 30 and 32 • 1 colour: Black and white

ALPINESTARS TECH 1-K SHOES

REF: EQ751.80T High quality driver shoes, comfortable and light. Constructed from microfiber and mesh for excellent ventilation. Durable lace closure system and Velcro strap offers safe and secure fitting. The sole is an ultra-thin F1 style constructed from an exclusive rubber compound for greater grip in both wet and dry conditions. Lateral supports and padding for comfort. Sizes: from 34 to 46 • 1 colour: Black and orange

ALPINESTARS TECH 1-KX SHOES

High quality driver shoes, comfortable and light. Constructed with microfiber and honeycomb frame design for excellent ventilation and flexion support. Combination lace and Velcro strap closure for a precise and secure fit. The sole is an ultra-thin F1 style constructed from an exclusive rubber compound for greater grip in both wet and dry conditions. Lateral forefoot, tongue, heel and side supports offers improved stability and impact protection. Sizes: from 35 to 46

ORDER ON-LINE ON WWW.ITAKASHOP.COM

1 WHITE, RED AND BLUE 2 BLACK, YELLOW AND WHITE

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

Ref: EQ751.76T Ref: EQ751.78T

NEED SOME HELP ? +33 (0)2 40 38 26 20

HELMETS AND ACCESSORIES

SNELL CMR2007 APPROVED:

Mandatory for drivers under 15 years old in CIK/FIA competition. Recommended by FFSA.

D C

KC7 BELL HELMET

REF: EQ761.22T Helmet features a ultra lightweight Carbon/Kevlar/Glass hand laminated shell. The very attractive design (based on HP7 helmet, used in F1) has been adapted to young drivers morphology. 2mm shield with double screen anti-fog for optimal vision under all circumstances. Optimized shell & shield design resulting in improved aerodynamic behaviour and energy absorbing capacities. Powerful top and chin bar ventilations thanks to a total of no less than 14 air intakes and extraction channels. Air intake and top spoiler available separately (reference: EQ764.028C and EQ764.029C). SNELL CMR 2007 approved. Helmet also used by adults. Not approved on the road

KC3 BELL HELMET

REF: EQ761.21T Helmet features a ultra lightweight Carbon/Kevlar/Glass hand laminated shell. The very attractive design (based on HP3 helmet, used in F1) has been adapted to young drivers morphology. 2mm shield with anti-fog treatment and Bell Racing «SV» brake visor mechanism for improved comfort and safety. Optimised top and chin bar ventilation. Forehead air intake included. Top spoiler available separately (reference: EQ764.029C). SNELL CMR2007 approved. Helmet also used by adults. Not approved on the road. Weight: between 1185 g to 1230 g according to sizes Sizes: from 52 to 59

Weight: between 1185 g to 1230 g according to sizes Sizes: from 52 to 59

KC3 BELL VISOR

REF: EQ762.13C For KC7 Bell helmet. 2 mm thickness screen.

REF: EQ762.03C For KC3 Bell helmet. 2 mm thickness screen.

Colours: Clear - Dark smoke - Yellow - Iridium blue - Iridium red/pink

Colours: Clear - Dark smoke - Iridium blue - Iridium red

KC3/RS3 BELL TEAR OFFS

REF: EQ764.024 Pack of 10 Tear-offs for KC3, RS3 and RS3-K Bell helmets.

KC7 BELL VISOR

KC7/RS7 BELL TEAR OFFS

REF: EQ764.032 Pack of 10 Tear-offs for KC7, RS7 and RS7-K Bell helmets.

BELL SCREWS KIT

REF: EQ764.02C Suitable for all Bell helmets. Colours: Silver - blue - red

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

DETERMINING HELMET SIZE:

Measure around your head one centimer above eyebrows and across the largest portion on the back of the head, keeping the tape above your ears. This is your helmet size.

RS3-K BELL HELMET

RS7-K BELL HELMET

REF: EQ761.19T Helmet with lightweight composite shell. 3 mm shield and Bell Racing «SV» brake visor mechanism for improved comfort and safety. Optimized top and chin bar ventilation. Air intake and top spoiler and air intake available separately (reference: EQ764.028C and EQ764.029C). SNELL K2010 approved. Not approved on the road.

REF: EQ761.18T Helmet with lightweight composite shell. Identical design as HP7, used in F1. Double screen anti-fog and Bell Racing «SV» brake visor mechanism for improved comfort and safety. Air intake and top spoiler available separately (reference: EQ764.028C and EQ764.029C). SNELL K2010 approved. Not approved on the road.

Sizes: S (57/58cm) - M (58/59cm) - L (60/61cm) - XL (61/62cm)

Sizes: S (57/58 cm) - M (58/59 cm) - L (60/61 cm) - XL (61/62 cm)

RS3, RS3-K AND KC3 BELL VISOR

RS7-K, RS7 BELL VISOR

REF: EQ762.035C For RS3 and RS3-K Bell helmets. Also matchable for KC3 Bell helmet. Double thickness anti-fog screen.

REF: EQ762.14C For RS7-K, RS7 Carbon, RS7 Pro Bell helmets. 3 mm thickness screen.

Colours: Clear - Dark smoke- Yellow - Iridium blue - Iridium red

Colours: Clear - Dark smoke - Yellow - Iridium blue - Iridium red

BELL AIR INTAKE

REF: EQ764.028C This Air Intake improves ventilation inside the helmet. Available for Bell helmets: KC3/ RS3 and KC7/RS7. Transparent. 1 2

KC3 / RS3 KC7 / RS7

REF: EQ764.028 REF: EQ764.030

ORDER ON-LINE ON WWW.ITAKASHOP.COM

TOP SPOILER

REF: EQ764.029C Aerodynamic accessory. Available for Bell helmets: KC3/RS3 and KC7/RS7. Transparent. 1 2

KC3 / RS3 KC7 / RS7

CONTACT THE NEAREST ITAKASHOP STORE

BELL HELMET BAG

REF: EQ766.008 Ideal for all BELL helmets.

REF: EQ764.029 REF: EQ764.031 SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

HELMETS AND ACCESSORIES DETERMINING HELMET SIZE:

Measure around your head one centimer above eyebrows and across the largest portion on the back of the head, keeping the tape above your ears. This is your helmet size.

B A

I E

GP6-S ARAI HELMET WITH HANS CLIPS

REF: EQ761.117T Automobile helmet using the best of ARAI technology. 3 mm visor with performance screw kit. Forehead and chin vents. Comfortable, strong Nomex foams. The shell is perfectly suited to the Hans system (special cut-out to match the shape of the Hans). Fitted with Hans clips. SNELL SA2010 and FIA 8858-2010 approved. Not approved on the road. Sizes: S (55/56) - M (57/58) - L (59/60) - XL (61/62)

SK6 ARAI HELMET

REF: EQ761.127T Karting helmet using the best of ARAI technology. 3 mm visor with performance screw kit. 2 forehead vents, 2 chin vents and 2 top air outlets. Comfortable, strong foams. SNELL K2010 approved. Not approved on the road. Sizes: S (55/56) - M (57/58) - L (59/60) - XL (61/62).

GP6/SK6 ARAI VISOR

REF: EQ762.016C For GP6-S and SK6 Arai helmet. 3 mm thickness screen. Colours: Clear - Dark smoke - Iridium blue/purple - Iridium red/gold

GP5/SK5 ARAI VISOR

REF: EQ762.01C For GP5 and SK5 Arai helmet. 3 mm thickness screen.

G H

GP5/SK5 ARAI TEAR OFFS

REF: EQ764.001 Pack of 5 Tear-offs for GP5 and SK5 Arai helmets.

GP5/SK5 ARAI SCREWS KIT

REF: EQ764.002 Full kit for GP5 and SK5 Arai helmets.

GP6-S/SK6 ARAI TEAR OFFS

REF: EQ764.007 Pack of 5 Tear-offs for GP6-S and SK6 Arai helmets.

GP6-S/SK6 ARAI SCREWS KIT

REF: EQ764.008 Full kit for GP6-S and SK6 Arai helmets.

ARAI TOP WING

REF: EQ764.003 Fits all Arai helmets. Clear.

ARAI HELMET BAG

REF: EQ766.002 Idea for all Arai helmets.

Colours: Clear - Dark smoke

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

K HELMET SIZES 0 XXS Orange 1 S Yellow 2 L Grey 3 XL Green 5 XXXL Blue

R3 BOX’S HELMET

REF: EQ761.74T BOX’S R3 helmet is an excellent value for money. It is perfectly suited for the rental market. Each colour corresponds to one size, which makes them easy to organize and fit (orange = size 0, yellow = size 1, grey = size 2, green = size 3, blue = size 5). The BOX’S R3 helmet features a comfortable antibacterial fabric liner, non-deformable polyurethane cheeks, a clear visor, anti-fog and scratch resistant, 2 mm thickness screen. Comfortable, aerodynamic, easy to put on and take off, easy to use, providing good peripheral vision and noise control, the BOX’S R3 helmet is unique on the market. ECE 22.05 and road approved. Helmet also allowed in competition in France. Sizes: 0 - 1 - 2 - 3 - 5

R3 BOX’S CLEAR VISOR

REF: EQ762.114 Clear visor for BOX’S R3 helmet, anti-fog and scratch resistant, 2 mm thickness screen.

BOX’S R3 VISOR FASTENING KIT

REF: EQ764.046 Fastening kit for BOX’S R3 helmet visor. Sold by pair.

ORDER ON-LINE ON WWW.ITAKASHOP.COM

REF: EQ766.005 For all types of helmet. With its fully-padded interior, this BOX’S helmet bag efficiently protects your helmet.

BOX’S R3 HELMET BUCKLE

REF: EQ764.047 Helmet buckle for BOX’S R3 helmet.

CONTACT THE NEAREST ITAKASHOP STORE

BOX’S HELMET BAG

BOX’S R3 HELMET VISOR SCREW

REF: EQ764.048 Screw for BOX’S R3 helmet visor.

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

HELMETS AND ACCESSORIES A

BENEFITS:

SNELL CMR 2007 APPROVED : Mandatory for drivers under 15 years old in CIK/FIA competition

SHIRO HELMET

REF: EQ761.66T Excellent value for money. Helmet with ergonomic design, light weight, equipped with vents for excellent ventilation and comfort. Thick visor for enhanced security. SNELL CMR2007 approved. Helmet also used by adults. Not approved on the road. Model: SH-1102 F1 Sizes: S (54/55) - M (56/57) - L (58/59)

Innovative: a dry helmet (drying time selection: 45mn or 90mn), deodorized or perfumed. Handy: a neat and safe helmet storage with wall mounting. Economical: low consumption. Eco-friendly: 100% recyclable material. Citizen responsible: french made item.

HELMET DRYER

REF: EQ767.001 This helmet dryer is used to dry and deodorize your helmet while protecting it from unexpected drops. Its innovative design and the use of moulded polycarbonate give it a modern and original look. In the Box: Helmet dryer - 220 V / 12V converter - Wall mounting bracket - Fragrance cartridge

BELL HELMET CLEANING KIT

REF: LU833.002 Bell helmet cleaning kit including: 250 ml. wax free polish, 250 ml. shield cleaner and 2 microfibre cleaning cloths.

XPS VISOR CLEANER

REF: LU838.001 For thoroughly and effective cleaning of the helmet visor. Removes greasy finger marks and squashed insects without a problem and gives a sparkling finish to the helmet visor. Shake well before use and spray sparingly onto surface. Wipe of immediately and polish with a clean and dry cloth. 200 ml

SPARCO HELMET BAG

REF: EQ766.007 Wide waterproof SPARCO helmet bag with inside pocket.

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

BOX’S SIZE GUIDE

RAIN EQUIPMENT

See rain suit size guide on page 12

ADULT KID

BOX’S RAIN SUIT

REF: EQ703.02T Light, stretchy and very strong. Transparent (ideal for visibility of the sponsor’s logos).

RAIN SUIT

REF: EQ703.00T Light and strong, 100% watertight, designed for driving comfort.

Child Sizes: Kid S - Kid M - XXS - XS • Adult Sizes: S - M - L - XL - XXL

2 colours: Blue (Junior) - Black (Adult)

BOX’S RAIN CLOAK

REF: EQ703.50T Long transparent rain cloak. Hood. 2 pockets. Snap closure. UV resistant. Box’s logo opposite heart and back for an excellent visibility of your logos, sponsors, etc...

1 2

Junior (from 11 to 14 years old) Adult (from XS to XXXL)

REF: EQ703.001 REF: EQ703.00T

Sizes: M - L - XL

RAIN OVERBOOTS

TURBO VISOR

REF: EQ752.00T Non-slip. For efficient protection of racing shoes.

REF: EQ763.00C Highly-efficient swivelling visor for driving in the rain whilst providing perfect visibility. Secured to the helmet by an elastic strap.

Sizes: from XS to XL

Colours: Clear and Yellow

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

ALPINESTARS TEMPEST WET WEATHER GLOVES

REF: EQ721.56T Designed specifically for wet weather use the Alpinestars Tempest kart glove features a water resistant soft shell top and wrist cut off with a fleece liner for increased warmth and comfort. An advanced rubberised palm provides maximum grip in wet conditions. Pre-curved design aids fit and reduces fatigue while and elasticated and velcro wrist closure ensure a personalised fir and greater protection. Sizes: from S to XXL

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

MECHANIC EQUIPMENT

THIN MECHANICS GLOVES

REF: EQ722.00T Specially designed for precision work, these gloves make the mechanic feel as though he has a 2nd skin. Their stretch material gives them high-precision grip, particularly for greasy or oily parts. Coated palm and fingers. Washable. CE marking on these gloves. Sold as a pair.

BOXâ&#x20AC;&#x2122;S APRON FOR MECHANIC

REF: EQ771.002 Black apron, with 3 big pockets, ideal for protecting your equipment. One size fits all

Sizes: M (taille 9) - L (taille 10)

MECHANICS GLOVES WITH SPIKES

MECHANICS GLOVES

REF: EQ722.002 Very strong gloves, with rubber spiked palms excellent for gripping tools. Sold as a pair.

REF: EQ722.001 Lightweight resistant mesh gloves. Sold as a pair.

One size fits all

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

SODI SPORTSWEAR C A

SODI KART RACING TEE SHIRT

REF: EQ710.07T Black and Orange Sodi Kart Racing t-shirt. 150 g, 100% cotton. Silk screen printed front and back. Sizes: 8 years old XXS - XS - S - M - L - XL - XXL - XXXL

SODI KART RACING BERMUDA SHORTS

REF: EQ708.00T Black Sodi Kart Racing bermuda shorts. 65% polyester and 35% cotton twill. 2 back pockets (with Sodi logo on back right pocket) and 1 side pocket on right leg (with SKR logo).

SODI KART RACING UMBRELLA

REF: EQ781.010

Sizes: S - M - L - XL - XXL

Silk screen printed back

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

D F

SODI KART RACING FLEECE JACKET

SODI KART RACING TROUSERS

REF: EQ712.03T Black Sodi Kart Racing fleece jacket. Fully lined. 280g/m2 polyester fleece. 100% cotton lining. 3 zipped pockets. Embroidered Sodi logo on the collar and back.

REF: EQ707.20T Black Sodi Kart Racing trousers. 65% polyester and 35% cotton twill. 2 back pockets (with Sodi logo on back right pocket) and 1 side pocket on right leg (with SKR logo).

Sizes: XXS - XS - S - M - L - XL - XXL

Sizes: XS - S - M - L - XL - XXL

SODI KART RACING JACKET

REF: EQ716.10T Black Sodi Kart Racing softshell jacket. Outer 92% polyester, 8% elastane fibre. Lining 100% polyester microfleece. Three layers of light soft-shell, breathable, water and windproof fabric. Two zipped side pockets. One breast pocket and one large zipped inside pocket. Adjustable tightening waist cord. Windproof flap under zip closure. Cuffs adjustable by means of Velcro strips. Embroidered Sodi logo front and back under the collar. Sizes: XS - S - M - L - XL - XXL

Embroidered logo collar ORDER ON-LINE ON WWW.ITAKASHOP.COM

Embroidered logo back

Side pocket CONTACT THE NEAREST ITAKASHOP STORE

Back pocket SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

SODI SPORTSWEAR C

SODI KART RACING TROLLEY BAG

REF: EQ718.006 Black Sodi Kart Racing roller bag. Large opening top, side pocket, retractable handle system, 2 wheels, removable shoulder strap, two handles. Sodi logo on the top and on the side pocket. 100% polyester. Dimensions: 75 x 30 x 35cm

SODI KART RACING POLO SHIRT

REF: EQ714.07T Black Sodi Kart Racing unisex polo shirt. 200 g, 95% cotton and 5% elastane. Silk screen logos front and back and right sleeve. Sizes: 8 years old XXS - XS - S - M - L - XL - XXL - XXXL

SODI KART RACING WINDBREAKER JACKET

REF: EQ716.05T Black Sodi Kart Racing windbreaker jacket. Outer: 100% nylon. Lining: 100% polyester. Waterproof liner. Hood inside the collar. Cuffs adjustable by means of Velcro® strips. 2 zippable side pockets and 1 zippable inside pocket. Adjustable tightening waist cord. Sodi logo front left side and back. ITAKAshop.com, Tekneex and Box’s logos front right side. Sizes: XS - S - M - L - XL - XXL

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

SODI KART RACING IPHONE CASE

REF: EQ781.04T Black Sodi Kart Racing Iphone case rubbery effect. Available for 4/4S and 5/5S Iphone.

SODI KART RACING BODYWARMER

REF: EQ716.50T Black Sodi Kart Racing bodywarmer. Outer: 100% nylon - waterproof. Lining: 100% polyester 2 zippable side pockets. 2 inside pockets. Embroidered Sodi logo front and back.

SODI KART RACING FLEECE HAT

REF: EQ715.062 Sodi Kart Racing fleece hat. 100% knitted polyester.

SODI KART RACING CAP

REF: EQ715.010 Sodi Kart Racing Cap.

Sizes: S - M - L - XL - XXL

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

ROTAX SPORTSWEAR B

Logo on the back

ROTAX WINTER JACKET

ROTAX RACING JACKET

REF: EQ716.03T Black rotax winter jacket with red inner hoody and collar. Water resistant, breathable. Rotax logo embroidery on the front, sleeve and back.

REF: EQ716.02T Grey, red and white Rotax softshell jacket, water resistant and breathable. Rotax logo embroideries on the front, sleeve and back.100% polyester and lining 100% microfleece.

Sizes: S - M - L - XL - XXL

Sizes: XS - S - M - XL - XXL

ROTAX SWEAT-SHIRT

REF: EQ712.24T Charcoal grey, red and white zipped Rotax sweat jacket. Rotax logo on the front and back. 70% cotton, 30% polyester. polyester. Sizes: S - M - XL - XXL

Logo on the back

ROTAX CAP REF: EQ715.021

MOJO HOODY SWEATER

MOJO TEE SHIRT

REF: EQ712.23T Black Mojo hoody sweater with green hoody and zipper. Rotax logo embroidery on the front and on sleeves. Mojo logo embroidery on the back. 70% cotton, 30% polyester.

REF: EQ710.40T Black Mojo t-shirt with green contrast seams and double layers in green at collar and cuffs. Rotax logo on the front and on sleeves. Mojo logo on the back. 100% cotton.

Sizes: S - M - L - XL - XXL

ROTAX RACING CAP REF: EQ715.023

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

J 1

Logo on the back

ROTAX ARROW TEE SHIRT

REF: EQ710.41T / EQ710.42T Rotax t-shirt. Silk screen printed on the front. 100% cotton.

LADY ROTAX TEE SHIRT

REF: EQ710.43T Berry/fuchsia lady ROTAX t-shirt. Rotax logo on the front, sleeve and back. 100% cotton.

REF: EQ714.10T Black Rotax poloshirt with red seams. Red and white bottomâ&#x20AC;&#x2122;s sleeves. Rotax logo embroidered on the front. 70% cotton and 30% polyester.

Sizes: XS - S - M - L - XL

Sizes: S - M - L - XL - XXL

54,5cm

Ref: EQ710.41T Ref: EQ710.42T

60cm

1 GREY 2 RED

K ROTAX TRAVEL ROLLER BAG

REF: EQ718.007 Black and red Rotax travel roller bag with retractable handle system. 1 main, 2 side and 1 small compartment. 2 wheels. Dimensions: 60 x 48 x 36 cm

ORDER ON-LINE ON WWW.ITAKASHOP.COM

ROTAX TEAM POLO SHIRT

ROTAX TROLLEY CASE

REF: EQ718.008 Black Rotax trolley case. Suitable for hand-luggage. 1 main compartment,1 small pocket on the front and 1 extendible gusset pocket. 2 wheels. Dimensions (without the extendible gusset pocket): 54,5 x 36,5 x 25 cm

CONTACT THE NEAREST ITAKASHOP STORE

ROTAX LAPTOP BAG

REF: EQ718.009 Black Rotax laptop bag with red piping. Dimensions: 40 x 35 cm

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

PROTECTIONS FOR DRIVER

SIZE GUIDE

See size guide on page 12

TOP

QUALITY

A ADULTE ADULT JUNIOR KID

BOX’S ALUMINIUM RIBS PROTECTOR

REF: EQ741.04T Top of the range ribs protector with shoulder harness. Adjustable height and width. Its external composite shell provides perfect protection and its interior made from absorbant material gives it unparalleled comfort. Sizes: K (Kid) - 0 (S) - 1 (M) - 2 (L) - 3 (XL)

ADULTE ADULT JUNIOR KID

FRONT PROTECTOR

REF: EQ741.044 Complementary accessory to the BOX’S Aluminium ribs protector (reference EQ741.04T). Povides extensive protection to the ribs cage.

BOX’S RIBS PROTECTOR

REF: EQ741.00T Ribs support with reinforcing plates for optimum safety. Perfect support and maximum driver comfort. Available in 2 models: Youth and adult

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

ADULTE ADULT JUNIOR KID

ALPINESTARS BIONIC RIBS PROTECTOR

REF: EQ741.02T The Bionic ribs support is a high performance ergonomic ribs protector designed to offer comfort and support. Dual density padding against the body offers effective impact protection and reduced vibration. Fibreglass is used to disperse energy away from the impact zone. This model is fully adjustable for secure support and comfortable personalised fit. 1 2 3

Sizes: Youth - Adult (S ~ L) - Adult (XL ~ XXXL)

Youth Adult (S ~ L) Adult (XL ~ XXXL)

REF: EQ741.025 REF: EQ741.026 REF: EQ741.027

ADULTE ADULT JUNIOR KID

SIZE GUIDE

See ribs protector size guide on page 12

SPARCO SPK7 RIBS PROTECTOR

REF: EQ741.07T The Sparco SPK-7 Karting ribs Protector is a semi-rigid vest with integrated shoulder protection. The inner liner is constructed from a high-impact absorbing EVA rigid internal structure with a polyethylene coating. This rigid protection is placed at the ribs and sternum, with a impact absorbing foam for the shoulders and spine. Adjustable elastic straps allow for a perfect fit, while all strap seams are fabric covered to help prevent tears and increase the durability of the vest. Sizes: XXS - XS - S - M - L - XL

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

NECK BRACE

BOX’S ADULT HEAD SUPPORT

REF: EQ732.02C Essential for driver safety, made from high density foam. Complies with European directive 89/686/CEE. 2 colours : Black - Red

EVS R4 RACE COLLAR

REF: EQ732.04T Race collar very comfortable and lightweight. Specifications: Minimizes risk of axial compression, hyperflexion, hyperextension and lateral hyperflexion - Easy front entry system - Fully adjustable sizing - Very comfortable and lightweight - Soft rubberized edges for increased comfort - Provides amazing range of motion of head - Weight: 386 g (Youth size) - 635 g (Adult size). 2 sizes: - Youth size (up to 48 kg and 1.52 m) - Adult size (over 48 kg and 1.52 m) 1 2

Youth Adult

REF: EQ732.040 REF: EQ732.041

KIDS

BOX’S CHILD HEAD SUPPORT

REF: EQ732.00C Essential for driver safety, made from high density foam. Complies with European directive 89/686/CEE.

BOX’S HEAD SUPPORT COVER

REF: EQ732.052 Protects the neck brace when fitted over the original cover. Size : Adult

2 colours : Black - Red

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

UNDERWEAR

TOP

QUALITY

BALACLAVA LARGE EYE OPENING

BOX’S BALACLAVA LARGE EYE OPENING

REF: EQ731.01C Stretch cotton balaclava.

REF: EQ731.06C Stretch cotton balaclava.

3 colours: White - Black - Red • One size fits all

ROTAX BALACLAVA

ALPINESTARS BALACLAVA

REF: EQ731.071 Light and breathable balaclava with COOLMAX® fabric (Functional fibers based on 100% polyester). Moisture wicking technology.

REF: EQ731.090 Polypropylene fabric main construction. Engineered for superior body temperature regulation. Flat seams for greater comfort.

1 colour: Black • One size fits all

ALPINESTARS KX TOP

REF: EQ710.21T Ideal for driver comfort, the Alpinestars top provides improved body temperature control under the suit and does not hamper the breathing capacity. Polypropylene fabric main construction. 1 colour: Black • Sizes: M and L

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

P RICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

CHASSIS PARTS 38 Bodywork 42 Seats and accessories 46 Steering wheels 48 Wheel rims 54 Hubs 58 Shafts and woodruff keys 59 Roller bearings and roller bearings brackets 60 Transmissions 66 Disks 67 Disk carriers 68 Brake kits 69 Brake calipers 70 Brake pads 71

Various brake parts

72 Tanks 75

Nuts and bolts

76 Stub axles - Ball joints - Tie rods 77

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

Pedals and accessories

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

BODYWORK D B

G C

KG BURU SPOILER BLACK KG BURU NASSAU PANEL BLACK

KG FP7 NASSAU PANEL BLACK

KG MINI MK14 SPOILER BLACK

REF: PC0613.201 Spoiler especially developed for Mini kart.

REF: PC0613.197

REF: PC0613.200

KG FP7 SPOILER BLACK

REF: PC0641.154

REF: PC0641.153

MOUNTING PLATE FOR KG BURU/FP7/MINI MK14 SPOILER

KG MINI MK14 NASSAU PANEL BLACK

REF: PC0641.161 Nassau panel especially developed for Mini kart.

REF: PC0613.198 For KG BURU/FP7/MINI MK14 spoiler. Delivered with screws. BURU AND FP7 BRACKETS 2

1 1

2 2

SPOILER BRACKET KIT

REF: PC0612.018 For KG spoiler bracket. Delivered complete: 1 flange (2 pieces), 2 clamps, screws and bolts. 1 Steel spoiler clamps (2 pces) 2 Spoiler flange (2 pces)

REF: PC0612.106 REF: PC0612.024

SPOILER BRACKETS

REF: PC0612.01M

NASSAU PANEL BRACKETS

REF: PC0642.02M

1 Upper spoiler bracket 2 Lower spoiler bracket

REF: PC0612.016 REF: PC0612.017

1 High nassau panel bracket 2 Low nassau panel bracket

REF: PC0642.027 REF: PC0642.047

MINI MK14 BRACKETS

1 2 1

MINI MK14 SPOILER BRACKET KIT

REF: PC0612.008 For MINI MK14 spoiler bracket. Delivered complete: 1 flange (2 pieces), 2 clamps, screws and bolts. 38

MINI MK14 SPOILER BRACKETS

REF: PC0611.045M 1 Upper spoiler bracket 2 Lower spoiler bracket

MINI MK14 NASSEAU PANEL BRACKETS

REF: PC0642.026M REF: PC0611.045 REF: PC0612.029

1 High nassau panel bracket 2 Low nassau panel bracket

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

REF: PC0642.026 REF: PC0642.089

KG STILO EVO SIDE POD BLACK

REF: PC0633.45M 1 Right side 2 Left side

KG DUO EVO SIDE POD BLACK

REF: PC0633.046 Identical right and left side pods.

REF: PC0633.450 REF: PC0633.460

KG STILO EVO SIDE POD BRACKET

REF: PC0631.194M

REF: PC0633.47M 1 Right side 2 Left side

KG DUO EVO SIDE POD BRACKET

REF: PC0631.19M

1 Right side 2 Left side

REF: PC0631.194 REF: PC0631.195

KG MINI MK14 SIDE POD BLACK REF: PC0633.472 REF: PC0633.471

KG MINI MK14 SIDE POD BRACKET

REF: PC0631.18M REF: PC0631.196 REF: PC0631.197

1 Right side 2 Left side

REF: PC0631.189 REF: PC0631.188

Q O N

RR ENCLOSING CHAIN GUARD

REF: PC0651.010 Essential for safety. Protects against flying grease and reduces noise. Sold with elastic securign strap.

RR CHAIN GUARD ELASTIC

REF: PC0652.000 For RR chain guard.

ORDER ON-LINE ON WWW.ITAKASHOP.COM

KG ADJUSTABLE CHAIN GUARD

REF: PC0651.032 One-piece. Adapts to all chassis types without modification. Chain guard elastic not required.

KZ CHAIN GUARD

REF: PC0651.037 KZ chainguard less cumbersome than a standard chainguard. Delivered with his screws kit.

KG CHAIN GUARD ELASTIC

REF: PC0652.001 For KG chain guard.

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

BODYWORK A

KG CIK PLASTIC REAR BUMPER

REF: PC0621.131 Mounted using mounting kit (Ref. PC0622.325 or PC0622.328).

KG TRIS REAR BUMPER

Full kit Central section Side section (x1)

KG REAR BUMPER BRACKET KIT

REF: PC0622.325 For KG rear bumber (Ref. PC0621.131 or PC0621.14M).

REF: PC0621.14M Mounted using bracket kit (Ref. PC0622.325 or PC0622.328). Width adjustable from 1000 mm to 1170 mm. Full kit: Central section, side section (x2) and screws and bolts. 1 2 3

ADJUSTABLE KG REAR BUMPER BRACKET KIT

REF: PC0622.329 For KG rear bumber (Ref. PC0621.131 or PC0621.14M).

E REF: PC0621.140 REF: PC0621.141 REF: PC0621.142

BUMPER BRACKET

REF: PC0622.28D For KG rear bumper (Ref. PC0621.131 or PC0621.14M). Sold individually. 1 2 3

Diameter 28mm Diameter 30mm Diameter 32mm

F 3

REF: PC0622.284 REF: PC0622.303 REF: PC0622.326

DD2 REAR PROTECTION

REF: PC0681.10M Available: • Complete assembly with screws and bolts • In spare parts: - Central tube to be cut according to the width of your chassis (sold individually) - Tyre protection (sold individually).

1 1 2 3

Full kit Central tube Tyre protection

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

REF: PC0681.108 REF: PC0681.101 REF: PC0681.110

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

SEATS AND ACCESSORIES

SEATS DIMENSIONS:

Find all seats dimensions on page 45.

MEKAONE POLYESTER SEAT

REF: PC0141.04T Polyester seat medium rigidity with flat bottom (for 1, 2, 3, 4 sizes) specially designed to meet competition requirements. Sizes: BABY PUFFO - BABY - MINI - 1 (MS) - 2 (ML) - 3(L) - 4 (XL) Medium rigidity

TILLETT T11, T11VG, T12 SEATS

Polyester competition and leisure seat. T11 > One size: MAN  Medium rigidity. T11VG > Sizes: S - MAN - MS - ML - L  Supple rigidity T12 > Sizes: S - MAN - MS - ML - L  Medium rigidity 1 2 3

T11 T11VG T12

REF: PC0141.171 REF: PC0141.165T REF: PC0141.18T

TILLETT T8 1/4 COVERED SEAT

TILLETT T7 COVERED SEAT

REF: PC0141.15T Polyester competition and leisure seat. Lateral padded for better support for the driver.

REF: PC0141.10T Polyester competition and leisure seat. Fully padded for maximum comfort.

Sizes: S -MS - ML - L - XL Medium rigitity

Sizes: XS - S - MS - ML - L - XL - XXL Medium rigitity

BOX'S ADHESIVE SEAT FOAM

REF: PC0143.001 Set of two pieces of protective foam to cut out and glue onto the insides of the seat.

SEAT PROTECTION PLATES

REF: PC0143.002 Set of two plates for rivetting to the outer sides of the seat to reinforce the mounting and prevent the polyester from shattering.

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

SODI SEAT RENTAL PRODUCT

SODI 1/4 COVERED SEAT RENTAL PRODUCT

REF: PC0141.01T Sodi plastic seat made from polyethylene.

REF: PC0141.02T Sodi plastic seat made from polyethylene with lateral padding for better support and improved comfort.

Sizes: Kid - XL - XXL

1 2 3

Kid XL XXL

1 2 3

REF: PC0141.029 REF: PC0141.015 REF: PC0141.025

TILLETT 1/4 COVERED SEAT RENTAL PRODUCT

Kid XL XXL

REF: PC0141.039 REF: PC0141.016 REF: PC0141.026

TILLETT COVERED SEAT RENTAL PRODUCT

REF: PC0141.08RC Tillett plastic seat made from polyethylene with lateral padding for better support for driver.

REF: PC0141.09T Tillett plastic seat made from polyethylene with fully padding for maximum comfort.

Sizes: XL - XXL

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

REINFORCING SEAT PLATE RENTAL PRODUCT

REF: PC0143.026 Reinforcing seat plate made from polyethylene specially designed to strenghen rental gokart seats. To be fixed on the outer sides of the seat. Plates sold individually.

SEAT PADDING KIT

REF: PC0143.018 This padding kit is suitable for any type of uncovered kart seat. The 8mm thick, mouldable foam pads have a self adhesive back for an easy fit.

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

SEATS AND ACCESSORIES

BOX'S SEAT FOAM ADAPTER

REF: PC0143.020 Allows you to adjust the position in the kart according to the size of the driver. Fits directly onto the seat.Very widely used on rental karts, it is also used for leisure karts. One size fits all

SRS SEAT FOAM ADAPTER

REF: PC0143.027 Manufactured in polyurethene foam, the Caliba seat insert offers full body protection and shock absorption in an easy to fit and easy clean design. Ideal for endurance karts where multiple drivers have to use the same seat or simply to offer greater levels of comfort. One size fits all

D E H

TEKNEEX FLAT SEAT STIFFENER

REF: PC0144.005L Used to stiffen your seat. Lengths (mm): 261 - 281 - 301 - 316 - 341

TEKNEEX CURVED SEAT STIFFENER

REF: PC0144.009L Used to stiffen your seat without being hindered by the engine or radiator. Lenghts (mm): 261 - 281 - 301 - 316 - 341

POLYESTER REPAIR KIT

REF: AC677.001 For repairing your seats.

SEAT SECURING KIT

REF: PC0142.012 Set of stackable washers of various thicknesses, allowing an increased range of adjustment combinations presenting no mounting problems. CONSISTS OF: · 8 x 7 mm thick, 50 mm Ø washers · 4 x 4 mm thick, 50 mm Ø washers · 4 x 3 to 2 mm thick, 50 mm Ø bevelled washers.

· 2 x 60 mm screws · 2 x 45 mm screws · 2 x 30 mm screws · 2 x 30 mm Ø cup washers · 4 Nylstop nuts · 4 plain washers

TEFLON SEAT SPACERS

REF: PC0142.007 Set of shims of various thicknesses for adjusting your seat. CONSISTS OF: · 10 x 1mm thick, 30mm Ø spacers

· 10 x 5mm thick, 30mm Ø spacers · 4 x 10mm thick, 30mm Ø spacers

FLANGE FOR FRAME STIFFENER

REF: PC0622.525 For tubes diameter 28 mm. Mounted using 2 x B3.P0812 washers and 2 x B1.C0825 screws (not supplied).

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

SEATS DIMENSIONS

RACING REFERENCE SIZES

RENTAL

A B C D E

BABY PUFFO BABY MINI T1 (MS) T2 (ML) T3 (L) T4 (XL)

23 26,5 35,5 10,5 21,5 26,5 30,5 38 10 21,5 27,5 31 42 10 21,5 28,5 31,5 41 10 31 31,5 37 44 11,5 32,5 32,5 37 45 11,5 32,5 35 38 46 12 33

T11 PC0141.171

MAN

31 34,5 44,5 10,5 31,5

T11 VG PC0141.165T

S MAN MS ML L

29,5 31,5 42,5 10 31 31 34,5 44,5 10,5 31,5 31,5 35 45 8,5 34,5 32,5 36 46 10 33,5 34,5 37,5 45 10 32,5

T12 PC0141.18T

S MAN MS ML L

30,5 31,5 42,5 10 31,5 33,5 44,5 9 32 34 44,5 8,5 32,5 35 45 10 35,5 37 45,5 10

31 33 34,5 33,5 32,5

T8 covered seat PC0141.15T

S MS ML L XL

28,9 30 44 9 29,9 31,5 46,5 9 31,4 32,5 48 9 33,4 34,5 49 9 34,4 36,5 50,5 9

37 37,5 38 39,5 40

T7 covered seat PC0141.10T

XS S MS ML L XL XXL

25,5 25,5 40,5 9 32,5 28 30,5 44 9 37 30 32 46,5 9 37,5 31 33 48 9 38 32,2 36 48,5 9 39,5 34 37,5 50,5 9 40 38 41 52 9,5 39

PC0141.04T

REFERENCE

SIZES A B C D E KID XL XXL

31,5 32 47,5 - 33,5 38 51 - 39 41,5 51 - -

KID XL XXL

34 34,5 46 - 36 39 51 - 39,5 41 51 - -

plastic seat ¼ covered

XL XXL

35 37 51 10 37 38 39,5 51,5 10 39

plastic seat covered

XL XXL

35 37 49,5 10 37 38 39,5 49,5 10 39

plastic seat ¼ covered

PC0141.02T plastic seat

PC0141.01T

PC0141.08RC PC0141.09T

Sizes in Centimeters. Indicative sizes. Non-binding. Dimensions seats tolerance:+/- 0,5 cm

A E

D C

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

STEERING WHEELS Ø 32mm

Ø 30mm

Ø 32mm

Ø 320 mm

Ø 345 mm

STANDARD SODI RACING STEERING WHEEL

LARGE DIAMETER SODI RACING STEERING WHEEL

REF: PC0431.064 Sodi factory steering wheel (diameter 320 mm). Aluminium manufacturing with alcantara and grip to enhance comfort. Sodi embroidery on top.

REF: PC0431.059 Large diameter steering wheel (345 mm) especially designed for an easier driving. Perfect for all young drivers. Aluminium manufacturing with alcantara and grip to enhance comfort. Sodi embroidery on top.

Weight: 490 g

Weight: 530 g

Ø 320 mm

MYCHRON STEERING WHEEL

REF: PC0431.067 Official AIM steering wheel for perfect integration and ideal protection for your MyChron. Weight: 940 g

Ø 320 mm

Ø 32mm

BOX'S PLAIN STEERING WHEEL

REF: PC0431.11C Alcantara-covered plain steering wheel. Aluminium manufacturing. Weight: 530 g  3 colours: Black - Blue - Red

KZ CLUTCH EVER KIT

REF: PC0441.021 FIts all types of steering wheel bracket. Adjusting screw for adjusting the clearance. Ergonomic handle. Beautiful titanium anodized finish.

STEERING WHEEL-MOUNTED ACCELERATOR KIT

REF: PC0432.020 This kit fits all types of chassis. It allows you to accelerate from the steering wheel. Delivered without sheath and cable.

BOX'S STEERING WHEEL COVER

REF: AC645.001 Protects the steering wheel against rain and dust. Very easy to fit.

GEAR SHIFT KNOB

REF: PC0441.024 Inside diameter: 18 mm. Beautiful finish.

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

EXTERNAL OPTION Steering wheel-operated front brake option ▼

COMPLETE STEERING WHEEL-MOUNTED CONTROL KIT

REF: PC0432.025 This complete kit of steering wheel-mounted controls allows the driver to control the accelerator and ITAKA rear brake by hand. Very high quality and finish. Delivered with the hose and master cylinder but without the steering wheel and its yoke. Compatible with steering wheel-operated front brake option.

RENTAL PRODUCT Ø 33mm

Ø 33mm

Ø 323 mm

SHIM FOR STEERING WHEEL

REF: PC0432.012 Angled shim of 8°.

Ø 320 mm

SODI RENTAL STEERING WHEEL

REF: PC0431.006 Last generation of rental steering wheel. Angled steering wheel (10°) designed for an ergonomic driving position. This D shaped style wheel facilitates refueling. 3 stainless steel wheel spokes compliant with the prevailing norms.

STRAIGHT STEERING WHEEL BRACKET

SHORT STRAIGHT STEERING WHEEL BRACKET

SODI FUN RENTAL STEERING WHEEL

REF: PC0431.005 Steering wheel for rental go-karts. 3 stainless steel wheel spokes compliant with the prevailing norms.

ANGLED STEERING WHEEL BRACKET

REF: PC0432.013 Straight steering wheel bracket for 20 mm diameter tube. 2 fixing holes.

REF: PC0432.010 Short straight steering wheel bracket for 20 mm diameter tube. 1 fixing hole.

REF: PC0432.003 Allows you to angle the position of the steering wheel (10 °). For 20 mm diameter tube. 2 fixing holes.

Colour: Aluminum

Colour: Titanium

Colour: Aluminum

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

WHEEL RIMS MAGNESIUM WHEEL RIMS

130mm

212mm

MAG 130 DWT FRONT WHEEL RIM (STUB AXLE-MOUNTED)

REF: PC0261.160 For 17 mm diameter stub axle. Delivered with valve, gripsters and bearings. Weight: 637 g

180mm

130mm

MAG 212 DWT REAR WHEEL RIM

REF: PC0261.059 High volume wheel rim. Ensures good grip to the chassis. Delivered with valve and gripsters. Weight: 590 g

MAG 130 DWT FRONT WHEEL RIM (HUB-MOUNTED)

MAG 180 DWT REAR WHEEL RIM

REF: PC0261.159 High volume wheel rim. Ensures good grip to the chassis. Delivered with valve and gripsters.

REF: PC0261.058 Very effective wheel rim with rain tyres. Delivered with valve and gripsters.

Weight: 466 g

Weight: 520 g LOW VOLUME WHEEL RIM

MAGNESIUM

130mm

180mm

212mm

WHEEL RIMS

MAG 130 DWT FRONT WHEEL RIM LIGHT (HUB-MOUNTED)

MAG 212 DWT LIGHT REAR WHEEL RIM

MAG 180 DWT LIGHT REAR WHEEL RIM

REF: PC0261.165 Low volume wheel rim. It allows you to free the chassis and provide a high level of grip. Delivered with valve and gripsters.

REF: PC0261.065 Low volume wheel rim. It allows you to free the chassis and increase the motive power with a high level of grip. Delivered with valve and gripsters.

REF: PC0261.066 Low volume wheel rim. It allows you to free the chassis and increase the motive power with a high level of grip. Delivered with valve and gripsters.

Weight: 390 g

Weight: 527 g

Weight: 455 g

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

ALUMINIUM WHEEL RIMS

120mm

110mm

130mm

ALU 110 DWT FRONT WHEEL RIM (STUB AXLE-MOUNTED)

ALU 120 DWT FRONT WHEEL RIM (HUB-MOUNTED)

REF: PC0261.122 For 17 mm diameter stub axle. Delivered with valve and bearings.

REF: PC0261.127 Delivered with valve and gripsters.

Weight: 620 g

Weight: 478 g

ALU 130 DWT FRONT WHEEL RIM (STUB AXLE-MOUNTED)

ALU 130 DWT FRONT WHEEL RIM (HUB-MOUNTED)

REF: PC0261.128 Delivered with valve and gripsters.

Weight: 813 g

Weight: 521 g

145mm

210mm

180mm

REF: PC0261.129 For 17 mm diameter stub axle. Delivered with valve, gripsters and bearings.

ALU 145 DWT REAR WHEEL RIM

ALU 180 DWT REAR WHEEL RIM

ALU 210 DWT REAR WHEEL RIM

REF: PC0261.017 Delivered with valve.

REF: PC0261.018 Delivered with valve and gripsters.

REF: PC0261.019 Delivered with valve and gripsters.

Weight: 503 g

Weight: 642 g

Weight: 805 g

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

WHEEL RIMS B

ALUMINIUM WHEEL RIMS

115mm

120mm

ALU 115 SUPER T6 FRONT WHEEL RIM (STUB AXLE-MOUNTED)

ALU 120 T6 BLACK FRONT WHEEL RIM (STUB AXLE-MOUNTED) MINIME CADET - Ø 25 MM STUB AXLE

Weight: 655 g

Weight: 820 g

ALU 120 T6 FRONT WHEEL RIM (HUB-MOUNTED)

120mm

130mm

REF: PC0261.133 Specially designed for the Minime-Cadet class, this wheel rim fits all 25 mm diameter stub axle. Delivered with valve, gripsters and bearings.

120mm

REF: PC0261.116 Very effectif when mounted at the front of Minikart chassis. For 17 mm diameter stub axle. Delivered with valve and bearings.

ALU 130 T6 BLACK FRONT WHEEL RIM (HUB-MOUNTED)

REF: PC0261.140 Delivered with valve and gripsters.

REF: PC0261.123 Delivered with valve and gripsters.

REF: PC0261.141 Delivered with valve and gripsters.

Weight: 540 g

Weight: 545 g

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

F ALUMINIUM WHEEL RIMS

150mm

ALU 150 T6 REAR WHEEL RIM

ALU 150 T6 BLACK REAR WHEEL RIM MINIME CADET

REF: PC0261.040 Specially designed for the Minime-Cadet class. Delivered with valve and gripsters.

Weight: 555 g

Weight: 570 g

180mm

210mm

REF: PC0261.016 Very efficient when mounted at the rear of Minikart chassis. Delivered with valve.

ALU 180 T6 BLACK REAR WHEEL RIM

ALU 210 T6 BLACK REAR WHEEL RIM

REF: PC0261.045 Delivered with valve and gripsters.

REF: PC0261.041 Delivered with valve and gripsters.

Weight: 590 g

Weight: 805 g

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

WHEEL RIMS

SPECIFIC RENTAL KART

ALUMINIUM

120mm

WHEEL RIMS

ALU 120 D20 FRONT STRENGHTENED WHEEL RIM

REF: PC0261.126 Strenghtened front wheel rim for leisure gokart with bearing for 25 mm diameter stub axle. Very high solidity.

120mm

180mm

REF: PC0261.125 Strenghtened front wheel rim for leisure gokart with bearing for 20 mm diameter stub axle. Very high solidity. Equipped with spacer to protect bearings while tightening.

ALU 120 D25 FRONT STRENGHTENED WHEEL RIM

ALU 120 3 HOLES FRONT STRENGHTENED WHEEL RIM

REF: PC0261.134 Strenghtened front wheel rim for leisure gokart with fixing on hub-mounted 3 holes. Very high solidity.

ALU 180 REAR STRENGHTENED WHEEL RIM

REF: PC0261.025 Strenghtened rear wheel rim for leisure gokart. Very high solidity.

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

Ideal for wheel balancing

L K I

RENTAL PRODUCT

F TOP

QUALITY

LEAD BAR

REF: AC652.001 For perfect adhesion, throughly degrease the edge of the wheel rim. 4 x 5 g and 4 x 10 g.

FLAT-HEADED GRIPSTER

REF: PC0263.105 Flat-headed M5 stainless steel gripster. Tightened using an Allen key. Delivered with gaskets. Sold individually.

SET OF 3 GRIPSTERS

REF: PC0263.004 Gripsters for M5 aluminum or M5 magnesium wheel rims. Manual tightening. Delivered with gaskets.

SET OF 3 GRIPSTERS

REF: PC0263.100 Gripsters for M5 aluminum or M5 magnesium wheel rims. Manual tightening or with Allen key. Delivered with gaskets.

SET OF 6 M8 FLANGED NUT

REF: PC0263.102 Nylstop self-locking nuts M8.

M8 NUT

REF: B2.08D Blocking nut BDR M8. Sold individually.

TUBELESS VALVE

REF: PC0264.00L Available: Short tubeless valve and standard tubeless valve.

ELBOW VALVE

REF: PC0264.003 Specially designed for rental karts, its shape allows easy access for pressure checks.

FRONT WHEEL BEARING

Available in 17 mm & 25 mm diameters. 1 2

17 mm 25 mm

REF: PC0262.006 REF: B9.61905-2RZ

M8 ANODIZED BARREL NUT

REF: PC0263.10C Nut with optimum grip for perfect tightening. A touch of discretion or fun to put onto your wheels . Sold individually. 3 colours: Black - Red - Silver

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

HUBS

TEKNEEX D25 3-HOLES ALUMINIUM FRONT HUB

REF: PC0252.04L Tekneex titanium finish aluminium front wheel hub. For 25 mm diameter stub axle. Delivered with studs, bearings and hub centering device.

HUB CENTERING DEVICE

REF: PC0253.007 Hub centering device without o-ring. Fits to Tekneex front wheel hub for 25 mm diameter stub axle.

D25 FRONT WHEEL BEARING

REF: B9.61905-2RZ Fits to front wheel hub for 25 mm diameter stub axle.

Length: 60 mm (423 g) - 80 mm (470 g) 100 mm (520 g)

D17 ALUMINIUM FRONT HUB

REF: PC0252.01L Machined aluminium front wheel hub. Beautiful Gold finish. For fitting to 17 mm diameter stub axle. Not compatible with front braking systems. Delivered with studs and bearings. Length: 61 mm (325 g) - 76 mm (365 g) - 96 mm (385 g)

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

TEKNEEX D25 ALUMINIUM REAR HUB

TEKNEEX D30 ALUMINIUM REAR HUB

REF: PC0252.008L Tekneex aluminium rear wheel hub. For 25 mm diameter shaft, 6 mm woodruff key. Delivered with studs and screws.

REF: PC0252.042 Tekneex aluminium rear wheel hub. For 30 mm diameter shaft, 6 mm woodruff key. Delivered with studs and screws.

Length: 50 mm (285 g) Originally equipped on Sodi chassis Innova and Alpha flash 85 mm (425 g)

Length: 98 mm (408 g)

TEKNEEX D40 ALUMINIUM REAR HUB

REF: PC0252.42L Tekneex titanium finish aluminium rear wheel hub. For 40 mm diameter shaft, 8 mm woodruff key. Delivered with studs and screws but without hub centering device.

HUB CENTERING DEVICE

REF: PC0253.006 Hub centering device with o-ring. Fits to Tekneex rear wheel hub for 40 mm diameter shaft.

Length: 60 mm (270 g) - 105 mm (405 g)

TEKNEEX D50 ALUMINIUM REAR HUB

REF: PC0252.516L Tekneex titanium finish aluminium rear wheel hub. For 50 mm diameter shaft, 8 mm woodruff key. Delivered with studs and screws. Length: 70 mm (300 g) - 90 mm (345 g) - 100 mm (370 g) - 120 mm (490 g) - 150 mm (560 g)

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

HUBS

D25 ALUMINIUM REAR HUB

REF: PC0252.251L Machined aluminium rear wheel hub. Beautiful Gold finish. For 25 mm diameter shaft, 6 mm woodruff key. Delivered with studs and screws. Length: 36 mm (250 g) - 67 mm (360 g) - 98 mm (450 g)

D30 ALUMINIUM REAR HUB

REF: PC0252.301L Machined aluminium rear wheel hub. Beautiful Gold finish. For 30 mm diameter shaft, 6 mm woodruff key. Delivered with studs and screws. Length: 67 mm (345 g) - 98 mm (440 g) - 120 mm (530 g)

D40 ALUMINIUM REAR HUB

D50 ALUMINIUM REAR HUB

REF: PC0252.401L Machined aluminium rear wheel hub. Beautiful Gold finish. For 40 mm diameter shaft, 8 mm woodruff key. Delivered with studs and screws.

REF: PC0252.501L Machined aluminium rear wheel hub. Beautiful Gold finish. For 50 mm diameter shaft, 8 mm woodruff key. Delivered with studs and screws.

Length: 76 mm (350 g) - 98 mm (420 g) - 120 mm (545 g)

Length: 78 mm (410 g) - 88 mm (435 g) - 98 mm (505 g) - 120 mm (630 g)

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

F G

D50 MAGNESIUM REAR HUB

D40 MAGNESIUM REAR HUB

REF: PC0252.511L Magnesium rear wheel hub. For 50 mm diameter shaft, 8 mm woodruff key. Delivered with studs and screws.

REF: PC0252.412L Magnesium rear wheel hub. For 40 mm diameter shaft, 8 mm woodruff key. Delivered with studs and screws.

Length: 78 mm (300 g) - 88 mm (320 g) - 98 mm (345 g) - 120 mm (480 g)

Length: 76 mm (250 g) - 120 mm (395 g)

SET OF 6 M8 BARREL NUTS

REF: PC0263.101 For wheel rims with little room between the stud and the side.

FRONT HUB SPACER

HUB STUB

REF: PC0253.003

STUB AXLE SPACER

REF: PC0253.008

REF: PC0213.00T

Length: 36mm  Inner diameter: 25mm

For 25mm Ø stub axle: 5mm or 15mm thick For 17mm Ø stub axle: 5mm, 10mm or 17mm thick

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

SET OF SHIMS FOR D50 HUB

REF: PC0253.009 Allows the rear track width to be quickly adjusted and prevents the hub from moving towards the centre of the shaft. Kit containing 24 plastic shims: 2 x 5 mm, 2 x 7 mm, 2 x 8 mm, 2 x 10 mm, 2 x 12 mm, 2 x 15 mm, 2 x 18 mm, 2 x 20 mm, 2 x 22 mm, 2 x 25 mm, 2 x 27 mm, 2 x 30 mm.

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

SHAFTS AND WOODRUFF KEYS

TEKNEEX SOLID SHAFTS Ø

25 30

TEKNEEX HOLLOW SHAFTS Ø

Type A B C D Reference mm Standard 1040 Standard 980 Standard 900 Rental product

mm 235 240 222,75

mm - 345 -

mm 136,5 130 250

Designation

mm PC0272.258 PC0272.259 PC0272.309

B C D 40

A 40

C mm

Reference

STANDARD

1040

128

240

PC0271.540

TS20 - Flexible

1040

250,5

327,5

120

PC0271.532

TM20 - Medium

1040

250,5

327,5

120

PC0271.533

TH20 - Hard

1040

250,5

327,5

120

PC0271.534

THH20 - Extra-hard

1040

250,5

327,5

120

PC0271.538

TS25 - Flexible

1040

250,5

327,5

120

PC0271.536

TH25 - Hard

1040

250,5

327,5

120

PC0271.535

TH30 - Very Hard

1040

250,5

327,5

120

PC0271.537

Q32 - Extra-hard

1040

250,5

327,5

120

PC0271.539

Standard

806

167

201

PC0271.514

Standard

926

175

220

PC0271.525 PC0271.513

Standard

980

91,5

228

MD20 - Flexible

1040

128,5

250,5

PC0271.415

MD25 - Medium

1040

128,5

250,5

PC0271.416

MD30 - Hard

1040

128,5

250,5

PC0271.417

Flexible

950

210

PC0271.419

MN20 - Flexible

950

214

PC0271.420

MN25 - Medium

950

214

PC0271.421

MN30 - Hard

950

214

PC0271.422

Medium

1060

281,1

385

173

PC0271.308

Medium

950

213

327

PC0271.306

Rental product 4 1

2 3

WOODRUFF KEYS WITH PINS Designation

A B C D Reference

nber of pins pins diam. 1 Woodruff keys with pins 8 (x2) 8x3x60 2 7,45 mm 2 Woodruff keys with pins 8 (x3) 8x3x60 3 7,45 mm 3 Woodruff keys with pins 6 (x2) 8x3x50 2 6 mm 4 Woodruff keys with pins 8 (x3) 8x3x75 3 7,45 mm

WOODRUFF KEYS WITHOUT PINS

width

center dist.

8 mm 8 mm 8 mm 8 mm

34 mm 17 mm 30 mm 24 mm

PC0273.026 PC0273.033 PC0273.008 PC0273.035

DIAMETRE 50 REAR AXLE REINFORCEMENT

REF: PC0275.050 This axle reinforcement has been designed and developed to prevent rear axle deformation (diameter 50, flexible and medium model) when locking the sprocket carrier. It requires a specific assembly tool (Ref OU956.002). 58

Designation

A B C Reference

Woodruff keys 6x6 L40 Woodruff keys 6x5 L50 Woodruff keys 6x6 L50 Woodruff keys 8x5 L50 Woodruff keys 6x6 L70 Woodruff keys 6x6 L80

width 6 mm 6 mm 6 mm 8 mm 6 mm 6 mm

height 6 mm 5 mm 6 mm 5 mm 6 mm 6 mm

length 40 mm 50 mm 50 mm 50 mm 70 mm 80 mm

PC0273.024 PC0273.005 PC0273.020 PC0273.016 PC0273.030 PC0273.036

REAR AXLE REINFORCEMENT TOOL

REF: OU956.002 This accessory is dedicated for the assembly and the dismantling of the rear axle reinforcement (Ref PC0275.050).

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

ROLLER BEARINGS AND ROLLER BEARINGS BRACKETS B

STEEL CERAMIC

SKF HIGH-PERFOMANCE BALL BEARING

REF: PC0274.020M The SKF high-performance roller bearing has been specially-designed for racing. It allows the shaft to be well tightened and centred in the middle of the bearing. Its profile avoids the risk of misalignment during the race. Its advantages are: its ease of assembly and disassembly, its accurate shaft guidance, its low friction, its ease of cleaning and re-greasing. Shaft diameter: 50 mm. Bearing outside diameter: 80 mm. Steel balls

REF: PC0274.020

Ceramic balls

BALL BEARINGS

REF: PC0274.01M Excellent quality ball bearings, allow the rear shaft to rotate very freely. Diameters: 25x52 - 25x62 - 30x62 - 40x80 50x80 - 50x90

REF: PC0274.021

75mm

Bearing Ø 52 mm

30mm

34mm

ROLLER BEARINGS BRACKETS

106mm

75mm

REF: PC0275.055

Bearing Ø 62 mm

REF: PC0275.054

Bearing Ø 80 mm

REF: PC0275.061

BEARING CARRIAGE

Solid machined aluminium carriage. The carriage's inside diameter corresponds to the bearing's outside diameter. Delivered with screws. Available in 52, 62 and 80 mm diameters.

60,6mm

67,9mm

99,1mm

67,9mm

Bearing Ø 62 mm

REF: PC0275.037

Bearing Ø 80 mm

REF: PC0275.039

TEKNEEX QUICK-DISCONNECT BEARING CARRIAGE

Solid machined aluminium carriage. Shaft to be removed quickly from above, ideal in endurance racing. The carriage's inside diameter corresponds to the bearing's outside diameter. Delivered with screws. Available in 62 mm and 80 mm diameters. ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

TRANSMISSIONS

WITHOUT O'RINGS

CHAIN GREASES:

Find all chain greases on page 146.

TOP VALUE FOR MONEY

MEKAONE CHAIN

REF: TR212.T Very good value for money for this chain which combines high performance and reliability. Suits all karts without gearboxes. Chain with a 7.774 pitch (type 219). Sizes: 96 to 114 links 96 98 100 102 104

TR212.096 TR212.098 TR212.100 TR212.102 TR212.104

106 108 110 112 114

TR212.106 TR212.108 TR212.110 TR212.112 TR212.114

REF: TR216.T Suits all karts without gearboxes. Chain with a 7.774 pitch (type 219). Sizes: 96 to 112 links 96 98 100 102 104

TR216.096 TR216.098 TR216.100 TR216.102 TR216.104

106 108 110 112

TR216.106 TR216.108 TR216.110 TR216.112

ROTAX PREMIUM CHAIN

REF: TR214.T High-quality chain developed by ROTAX with excellent tensile strength and wear. Suits all karts without gearboxes and specially to the RotaxMax engine, it reduces the power losses and increases efficiency. Chain with a 7.774 pitch (type 219). Sizes: 96 to 112 links 96 98 100 102 104

RK GB 219 KR CHAIN

TR214.096 TR214.098 TR214.100 TR214.102 TR214.104

106 108 110 112

TR214.106 TR214.108 TR214.110 TR214.112

TR219.007

per meter

DID 219 DHA CHAIN

REF: TR217.T Excellent strength. Suits all karts without gearboxes. Chain with a 7.774 pitch (type 219). Sizes: 96 to 112 links 96 98 100 102 104

REGINA 126RH CHAIN

REF: TR219.00T Chain for 125 gokart with gearboxes. Long life. Used by most racing teams. Chain with a 12.7 pitch. Sizes: 54 links (delivered with clip link) or per meter (delivered without clip link). 54

TR217.096 TR217.098 TR217.100 TR217.102 TR217.104

106 108 110 112

CLIP LINK FOR REGINA 126RH CHAIN

REF: TR219.002

TR219.009

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

TR217.106 TR217.108 TR217.110 TR217.112

WITH O'RINGS

ROTAX PREMIUM O-RING CHAIN

REF: TR215 O-ring chain developed by ROTAX with excellent tensile strength and wear. Suits all karts without gearboxes and specially to the RotaxMax engine, it reduces the power losses and increases efficiency. This chain with o-rings is used to seal the grease and increase its lifetime. Chain with a 7.774 pitch (type 219). Sizes: 98 to 112 links 98 100 102 104

TR215.098 TR215.100 TR215.102 TR215.104

106 108 110 112

DID 428VX CHAIN 54 LINKS

TR215.106 TR215.108 TR215.110 TR215.112

Size: 54 links

Sizes: 96 to 112 links 96 98 100 102 104

TR213.096 TR213.098 TR213.100 TR213.102 TR213.104

TR213.106 TR213.108 TR213.110 TR213.112

REF: TR220.T Replacing the KRO Black & Black, the RK o-ring chain (KRO Blue & Blue) is currently the reference for high level competitions. Suits all karts without gearboxes. Chain with a 7.774 pitch (type 219). Sizes: 96 to 112 links 96 98 100 102 104

DID 428VX CHAIN 70, 72, 94 LINKS

TR220.096 TR220.098 TR220.100 TR220.102 TR220.104

106 108 110 112

TR220.106 TR220.108 TR220.110 TR220.112

MEKAONE 428VX CHAIN 60, 62, 64 LINKS

REF: TR218.67T Chain with o-rings. For rental gokart and gokart with gearboxes. Long life. Chain with a 12.7 pitch. Locked delivered with clip link.

Sizes: 70 - 72 - 94 links

Sizes: 60 - 62 - 64 links

TR218.570 TR218.572

CLIP LINK FOR DID 428VX CHAIN

REF: TR219.006

ORDER ON-LINE ON WWW.ITAKASHOP.COM

106 108 110 112

RK BB 219 KRO CHAIN

REF: TR218.57T Chain with o-rings. For rental gokart and gokart with gearboxes. Very high strength. Chain with a 12.7 pitch. Locked delivered.

70 72

DID 219 V2 SDH CHAIN

REF: TR213.T Latest generation of chains with o-rings, the V2 SDH offers a very high level of reliability. Suits all karts without gearboxes. Chain with a 7.774 pitch (type 219).

REF: TR218.554 Chain with o-rings. For 125cc gokart with gearboxes. Very high strength. Delivered with clip link.

TR218.594

60 62

TR218.560 TR218.562

TR218.564

CLIP LINK FOR MEKAONE 428VX CHAIN

REF: TR218.559

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

TRANSMISSIONS B

TOP

QUALITY

ANODIZED PERFORATED SPROCKET

SPECIAL HIGH-PERFORMANCE SPROCKET

REF: TR221.0T Specially treated and anodized. For standard chain type 219.

REF: TR221.1T Very high quality finish for very long life. For standard chain type 219.

Sizes: 65 to 91 teeth

Sizes: 64 to 90 teeth

TOP

QUALITY

125CC ERGAL REAR SPROCKET

125CC ALUMINIUM REAR SPROCKET

STEEL REAR SPROCKET

REF: TR242.22T In two parts. For chain with a 12.7 pitch. 50 mm diameter.

REF: TR242.24T In two parts. Very high quality. For chain with a 12.7 pitch. 50 mm diameter.

REF: TR244.02T In two parts. Very high strength. For chain with a 12.7 pitch. 30 mm diameter.

Sizes: 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 teeth

Sizes: 26 - 28 - 29 - 30 teeth

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

G F

1/2 NOTCHED REAR SPROCKET RENTAL PRODUCT

REF: TR223.25T Specifically designed for rental. For 30 mm or 50 mm diameter shaft. Width: 33 mm. Sold by 1/2 sprocket.

HONDA ENGINE SPROCKET RENTAL PRODUCT

REF: TR249.00T For chain with a 12.7 pitch.

TM FINAL GEAR BOX ENGINE SPROCKET

REF: TR251.01T For chain with a 12.7 pitch. Sizes: 15 to 20 teeth

Sizes: 11 - 12 - 13 - 14 - 15 teeth

Sizes: 880x33 mm - 960x33 mm - 1080x33 mm

ROTAX MAX ENGINE SPROCKET

REF: PMFR382.00T Standard piece. Excellent quality. For standard chain type 219. Sizes: 12 - 13 - 14 - 15 - 16 teeth

ORDER ON-LINE ON WWW.ITAKASHOP.COM

NOTCHED BELT RENTAL PRODUCT

REF: TR231.00T Specifically designed for rental. Very high strength and long lasting.

Sizes: 51 theeth and 68 teeth

CONTACT THE NEAREST ITAKASHOP STORE

ROTAX MAX CHAIN PROTECTION COVER

REF: PMFR383.012 Chain protection cover for all engines of the Rotax 125 Max engine range. It protects radiator of projections and reinforces security.

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

TRANSMISSIONS B

TEKNEEX D25 ALUMINIUM SPROCKET CARRIER

REF: PC0281.255 Very high quality finish. Colour: Titanium. For 25 mm diameter shaft, 6 mm woodruff key (335 g). Original equipment fitted to Sodi Innova and Alpha flash. Delivered complete with nuts and bolts.

D30 ALUMINIUM SPROCKET CARRIER

REF: PC0281.300 For 30 mm diameter shaft, 6 mm woodruff key (390 g). Delivered with nuts and bolts.

TEKNEEX D50 ALUMINIUM SPROCKET CARRIER

REF: PC0281.506 Very high quality finish. Colour: Titanium. For 50 mm diameter shaft, 8 mm woodruff key (385 g). Delivered complete with nuts and bolts.

D40 ALUMINIULM SPROCKET CARRIER

REF: PC0281.408 For 40 mm diameter shaft, 8 mm woodruff key (375 g). Delivered without nuts and bolts.

D50 ALUMINIUM SPROCKET CARRIER

REF: PC0281.503 For 50 mm diameter shaft, 8 mm woodruff key (415 g). Delivered without nuts and bolts.

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

TOP

QUALITY

PREDATOR SPROCKET CARRIER

REF: PC0281.50M This revolutionary sprocket carrier allows you to change your sprocket in record time. Simply turn the screw once.

PIN FOR PREDATOR SPROCKET CARRIER

REF: PC0282.001 Predator sprocket carrier spare part.

3 versions: Ø 25 mm - Ø 50 mm for Rotax class - Ø 50 mm for KF class (reversed mounting).

MAGNESIUM SPROCKET CARRIER

REF: PC0281.40D The lightness of magnesium. Delivered without nuts and bolts. Ø 40 mm shafts 8 mm woodruff key (290 g) Ø 50 mm shafts 8 mm woodruff key (310 g)

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

DAMPING SPROCKET CARRIER

REF: PC0281.510 Extends the life of the sprocket. Recommended for endurance racing. For 50 mm diameter shaft. Delivered without nuts and bolts.

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

DISKS

RENTAL PRODUCT

C A

D B

140 MM FRONT BRAKE DISK

REF: PC0341.111 CIK 98/FR/17 certification. Fits to 140 mm front brake disk carrier (reference PC0343.009). Originally fitted on Sodi manual front brake.

205 MM REAR SOLID BRAKE DISK

REF: PC0341.009 Mechanical brake. 205 mm diameter, 5 mm thick.

REF: PC0341.220 Hydraulic brake. Fits to disk carriers reference PC0291.260/PC0291.313. Originally fitted on Sodi Delta 950, Sodi Innova and Alpha Flash (shafts Ø25 and Ø30).

140 MM FRONT VENTILATED BRAKE DISK

REF: PC0341.223 CIK 96/FR/20 certification. Fits to 140 mm front brake disk carrier (reference PC0343.009). Originally fitted on Sodi KZ and DD2 front brake.

168 MM REAR VENTILATED BRAKE DISK

192 MM REAR VENTILATED BRAKE DISK RENTAL PRODUCT

REF: PC0341.218 Hydraulic brake. 192 mm diameter, 18 mm thick. Fits to disk carriers reference PC0291.518/PC0291.310.

205 MM REAR PERFORATED BRAKE DISK

REF: PC0341.108 Mechanical brake. 205 mm diameter, 5 mm thick. Originally fitted on Sodi Delta and Alpha Mini-Storm.

192/205 MM REAR VENTILATED BRAKE DISK

Hydraulic brake. CIK 96-97/FR/20 and 98/FR/17 certification. Fits to disk carriers reference PC0291.523/ PC0291.414. Originally fitted on Sodi rear brake (shafts Ø 40 and Ø 50). Ø 192 mm Ø 205 mm

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

Ref: PC0341.224 Ref: PC0341.225

DISK CARRIERS

D25 ALUMINIUM DISK CARRIER

REF: PC0291.259 For mechanical brake. For 205 mm diameter disk and 25 mm diameter shaft, 6 mm woodruff key. Very high quality finish. Originally fitted on Sodi Delta 900, Sodi Innova, Alpha Mini-Storm and Alpha Flash. Delivered with nuts and bolts.

D30 ALUMINIUM DISK CARRIER

REF: PC0291.314 For hydraulic brake. For 168 mm diameter disk and 30 mm diameter shaft, 6 mm woodruff key. Originally fitted on Sodi Delta 950. Delivered with nuts and bolts.

D25 ALUMINIUM DISK CARRIER

REF: PC0291.261 For hydraulic brake. For 168 mm diameter disk and 25 mm diameter shaft, 6 mm woodruff key. Originally fitted on Sodi Innova and Alpha Flash. Delivered with nuts and bolts.

D40 / D50 ALUMINIUM FLOATING DISK CARRIER

For hydraulic brake. For 192 mm / 205 mm diameter ventilated disk and 40 mm / 50 mm diameter shaft, 8 mm woodruff key. Delivered without disk mounting screws. Ø 40 mm Ø 50 mm

ORDER ON-LINE ON WWW.ITAKASHOP.COM

Ref: PC0291.414 Ref: PC0291.523

CONTACT THE NEAREST ITAKASHOP STORE

RENTAL PRODUCT

ALUMINIUM DISK CARRIER RENTAL PRODUCT

REF: PC0291.31T For 192 mm diameter ventilated disk (reference: PC0341.218). Delivered without disk mounting screws. Ø 30 mm Ø 50 mm

SHIPMENTS WITHIN 24H (see the practical guide page 4)

Ref: PC0291.310 Ref: PC0291.518

NEED SOME HELP ? +33 (0)2 40 38 26 20

BRAKE KITS 8 7

5 8

7 4 9 1

STEERING WHEEL - OPERATED FRONT BRAKE KIT

REF: PC0310.023 This high-tech braking system with steering wheel-operated control is a valuable driving aid that allows you to reduce and optimize your braking distances. It is made from solid-machined aluminium with a pump built into the steering wheel bracket and two 4 pistons calipers. The braking action is actuated using the handle located behind the steering wheel, providing total independence between front and rear braking. The system can only be mounted on a 25 mm diameter stub axle with D25 3-hole hubs. This assembly is CIK certified under number 98/FR/17 and MUST be fitted with the 97/FR/20 certified rear brake. Delivered complete and drained.

1 2 3 4 5 6 7 8 9

Steering wheel master cylinder and pump handle Set of brake pads Front hydraulic brake hose 4 pistons front caliper D18 Front left caliper holder Front right caliper holder Brake disk D140 mm Front brake disk carrier Front disk carrier pin

REF: PC0311.039 REF: PC0351.048 REF: PC0324.070 REF: PC0331.096 REF: PC0331.079 REF: PC0331.080 REF: PC0341.111 REF: PC0343.009 REF: PC0343.010

2 10

11 5

3 4

PEDAL-OPERATED FRONT BRAKE KIT

REF: PC0310.024 Hydraulic front brake system equipped with two 4-piston calipers and a 19 mm diameter pump made from solid machined aluminium. With these 140 mm ventilated disks, you are able to brake powerfully and with precision. The system can only be mounted on a 25 mm diameter stub axle with D25 3-hole hubs. This assembly is CIK certified under number 96/FR/20 and MUST be mounted with the 97/FR/20 certified rear brake. Delivered complete and drained.

1 2 3 4 5 6 7 8 9 10 11 12 13

Master cylinder D19 Brake linkage Brake distributor Brake distributor knurled knob KZ/DD2 front hydraulic brake hose Brake safety cable Front left caliper holder Front right caliper holder KZ/DD2 4 pistons front caliper D18 Ventilated brake disk D140 mm Front brake disk carrier Front disk carrier pin Set of brake pads

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

REF: PC0311.040 REF: PC0322.081 REF: PC0322.066 REF: PC0322.079 REF: PC0324.069 REF: PC0326.011 REF: PC0331.079 REF: PC0331.080 REF: PC0331.095 REF: PC0341.223 REF: PC0343.009 REF: PC0343.010 REF: PC0351.048

BRAKE KITS / BRAKE CALIPERS

6 3

REAR BRAKE KIT

Sold individually: 1 2 3 4 5 6

Master cylinder D19 Hydraulic brake hose L610 4 pistons rear caliper D20 Ventilated brake disk D205 m Ventilated brake disk D192 mm Set of brake pads

REF: PC0311.038 REF: PC0324.068 REF: PC0331.097 REF: PC0341.225 REF: PC0341.224 REF: PC0351.049

4 5

BRAKE CALIPERS

ITAKA MECHANICAL BRAKE CALIPER

REF: PC0331.030 Solid-machined, this high performance caliper allows you to brake powerfully and with great precision. Pads adjusted by push screw. Encaged pads for greater safety. Securing centre-to-centre distance 60 mm. Delivered complete with pads.

TEKNEEX 4 PISTONS FRONT CALIPER D18

REF: PC0331.096 4 pistons front caliper D18 for steering wheel-operated front brake. CIK 98/FR/17 certification. Delivered without pads and split pin.

路U

路

USE

KZ DD2

TEKNEEX 4 PISTONS FRONT CALIPER D18

REF: PC0331.095 4 pistons front caliper D18 for pedal-operated front brake. CIK 96/FR/20 certification. Delivered without pads and split pin.

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

TEKNEEX 4 PISTONS REAR CALIPER D20

REF: PC0331.097 CIK 97/FR/20, 98/FR/17, 96/FR/20 certification. Delivered without pads, split pin, screws and springs.

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

BRAKE PADS

REAR BLACK CERAMIC BRAKE PADS FOR TEKNEEX CALIPERS

REF: PC0351.049 Gradual high-endurance braking. Total thickness = 10 mm. Set of 2 pads delivered with split pin, screws and springs. For TEKNEEX 4 pistons rear caliper D20.

REAR RACING RED BRAKE PADS FOR TEKNEEX CALIPERS

REF: PC0351.050 Very powerful agressive braking Total thickness = 10 mm. Set of 2 pads delivered with split pin, screws and springs. For TEKNEEX 4 pistons rear caliper D20.

REAR BRAKE PADS FOR ITAKA MECHANICAL CALIPERS

REF: PC0351.019 Powerful agressive braking. Total thickness = 16 mm. Set of 2 pads delivered with split pin, screws and springs. For ITAKA mechanical brake caliper (ref: PC0331.030).

D18 BRAKE PADS FOR ITAKA AND TEKNEEX CALIPERS D

REAR BLACK CERAMIC BRAKE PADS FOR ITAKA CALIPERS

REF: PC0351.030 Gradual high endurance braking. Total thickness = 10 mm. Set of 2 pads delivered with split pin, screws and springs. For ITAKA 4 pistons rear caliper D24.

REAR RACING RED BRAKE PADS FOR ITAKA CALIPERS

REF: PC0351.040 Very powerful agressive braking. Total thickness = 10 mm. Set of 2 pads delivered with split pin screws and springs. For ITAKA 4 pistons rear caliper D24.

Total thickness = 5.5 mm. Set of 4 pads delivered with 4 split pins of 2 different lengths. For ITAKA and TEKNEEX 4 pistons caliper D18. 1 RACING RED Very powerful agressive braking

Ref : PC0351.048

2 CERAMIC BLACK Gradual high endurance braking

Ref : PC0351.047

1 5

1 2

SPLIT PIN Ø 4 - L: 45 for 4 pistons front caliper D18 - Thin disk. Ø 4 - L: 56 for 4 pistons front caliper D18 - Ventilated disk (bv and dd2). Ø 5 - L: 71 for 4 pistons rear caliper D24 CAP COVER FOR MASTER CYLINDER Prevents the master cylinder cap to loosen.

6 3

REF: B5.04T REF: B5.0445 REF: B5.0456 REF: B5.0571 REF: PC0313.016

3 4 5 6

ITAKA MECHANICAL BRAKE ADJUSTING SCREW For ITAKA mechanical brake. Sold individually. ITAKA MECHANICAL BRAKE ADJUSTING SPRING For ITAKA mechanical brake. Sold individually. PAD SECURING SCREWS For TEKNEEX hydraulic brake. Sold individually. COMPRESSION SPRING For TEKNEEX & ITAKA hydraulic brake. Sold individually.

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

REF: PC0335.013 REF: PC0335.014 REF: PC0335.044 REF: PC0335.036

VARIOUS BRAKE PARTS A M I

D G

E C K

H F

MECHANICAL BRAKE CABLE SHEATH

REF: PC0325.001 Sold by meter.

MECHANICAL BRAKE CABLE

BRAKE SAFETY CABLE

Ø: 6 mm

Available in 5 lengths: 290 mm - 335 mm - 360 mm - 380 mm - 425 mm

ANODIZED DOUBLE CABLE CLAMP

REF: PC0711.08C

REF: PC0326.00L Available in 3 lengths: 350 mm - 398 mm - 440 mm

CABLE CLAMP

REF: PC0326.006

DOUBLE BRAKE CABLE CLAMP

OPEN SOCKET

Available in: Ø Inside: 6 mm, Short - Ø Inside: 6 mm, Long - Ø Inside: 5 mm, Long

REF: PC0683.012 For improved brake cooling. Fits all chassis.

CONTACT THE NEAREST ITAKASHOP STORE

PLASTIC ADHESIVE CABLE GUIDE

REF: PC0711.180 Ideal for running cables. Quick and easy installation thanks to the adhesive backing. Material: Plastic.

BRAKE VENT

DISK PROTECTOR

REF: PC0342.00M Available in various models: For Mini chassis, for SR and ST chassis, for Minime-Cadet chassis (DELTA and INNOVA). Delivered without nuts and bolts.

REF: PC0321.00L

REF: PC0711.042

ORDER ON-LINE ON WWW.ITAKASHOP.COM

BRAKE LINKAGE

REF: PC0322.00L

Available in 3 colors: - Black - Red - Silver

REF: PC0711.003

REF: PC0326.004 Thickness: 2,3 mm. Length: 2,50 m

ADJUSTABLE SHEATH STOP

ALUMINIUM ADHESIVE CABLE GUIDE

REF: PC0711.181 Ideal for running cables. Quick and easy installation thanks to the adhesive backing. Material: Aluminum.

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

TANKS

D B

G F E

3L TANK

REF: PC0451.012

3L ECO TANK

SHIM FOR ECO TANK

REF: PC0452.012 For 3L ECO tank reference PC0451.006.

5L ECO TANK

REF: PC0451.007

TANK FILLER CAP

REF: PC0453.005 For tanks references PC0451.012, PC0451.007 and PC0451.006. Delivered with gasket.

REF: PC0451.006

8L EXTRACTIBLE TANK

REF: PC0451.004 Delivered with tightening butterfly nut but without plate. Plunger equipped with a special hose and his 2 support clips. CIK certified.

9.5L EXTRACTIBLE TANK

REF: PC0451.010 Delivered with tightening butterfly nut and plate. CIK certified.

EXTRACTIBLE TANK PLATE

REF: PC0452.009 For tanks references PC0451.004 and PC0451.010.

TANK FILLER CAP

REF: PC0453.004 For tanks references PC0451.004 and PC0451.010. Delivered with gasket.

FILLER CAP GASKET

REF: PC0453.007 For tanks references PC0451.004 and PC0451.010.

TIGHTENING BUTTERFLY NUT

REF: PC0711.101

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

P Q

T R

TANK PROTECTOR

VIOLET FUEL HOSE

REF: PC0452.010 Essential for protecting both your tank and your bottom board. Anti-vibration foam with adhesive on one side.

REF: PC0711.024 Very high strength. Remains flexible over a long period. Sold by meter.

Dimensions: 160 x 200 mm

Colour: Violet

TANK PLUNGER

TRANSPARENT FUEL HOSE

REF: PC0452.001

REF: PC0711.021 Sold by meter.

TANK CONNECTOR

REF: PC0452.008 Tank connector can be adapted on all tanks for fuel return or vent.

Colour: Transparent

FUEL HOSE SECURING CLIP

FUEL "Y" PIECE

REF: PM393.107

REINFORCED FUEL "Y" PIECE

REF: PM393.111 The best of " Y ", especially reinforced for an optimal use.

FUEL FILTER

REF: PM393.10M Available: 1 Small volume square 2 Standard fuel filter 3 SA250 - KZ engine 4 Rotax engine

REF: PC0711.023 For 8 mm outside diameter hose.

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

TANKS

FUEL RECOVERY DRUM

REF: PC0454.001 Capacity 50 ml.

FUEL RECOVERY DRUM BRACKET

REF: PC0454.002

FUEL RECOVERY DRUM CAP

REF: PC0452.003

RENTAL PRODUCT B

F E

TEKNEEX 11L TANK

REF: PC0451.02M Strengthened. Constant thickness. Feed, fuel return and vent pre-installed. Large diameter cap for quicker filling. Fits between column uprights. 11 litres. Available with top or bottom feed

TANK PLUNGER

REF: PC0452.025 Fuel tank pipe for rental fuel tank go kart. Delivered with M12 connection, hose and seal.

D8 FIBRE GASKET

TANK FILLER CAP

REF: PC0453.010 For Tekneex tank reference PC0451.02M. Delivered with gasket.

FUEL HOSE SECURING CLIP

REF: PC0452.023 For 12 mm outside diameter hose.

M8 TANK CONNECTOR

REF: PC0452.024 For Tekneex tank reference PC0451.02M.

REF: PC0453.012 D8 fibre gasket for M8 tank connector.

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

NUTS AND BOLTS

Nuts and bolts sold individually

A G

B H

I E

BHC SCREWS

NUTS

REF: B1B

REF: B2

4x16 - 5x6 - 5x10 - 5x16 - 6x10 - 6x16 - 6x25 - 6x30 - 6x40 - 8x10 - 8x16 8x20 - 8x25 - 8x30 - 8x35 - 8x40 - 10x12 - 10x20 - 10x30 - 10x35 - 10x40

M5 nylstop - M6 - M6 nylstop - flange M6 nylstop - M8 - M8 nylstop flange M8 nylstop - M10 - M10 nylstop - flange M10 nylstop - flange M12 nylstop - M14 nylstop

CHC SCREWS

PLAIN WASHERS

REF: B1C 5x6 - 6x16 - 6x25 - 6x30 - 6x35 - 6x40 - 6x60 - 6x80 - 8X20 - 8X25 8x30 8x40 - 8x45 - 8x50 flat head - 8x65 - 10x25 - 10x40 - 10x50 - 10x60

FHC SCREWS

REF: B3P d5 D10 EP1 - d6 D12 EP1.2 - d6 D14 EP1.2 - d6 D18 EP1.2 - d8 D12 EP2 d8 D16 EP1.6 - d8 D16 EP2 - d8 D22 EP1.5 - d10 D20 EP2 - d12 D20 EP2

CUP WASHERS

REF: B1F 5x10 - 6x12 - 6x16 - 6x20 - 6x25 - 6x30 - 6x35 - 6x40 - 6x45 - 8x16 - 8x20 8x25 - 8x30 - 8x40 - 8x50 - 8x55 - 10x45 - 10x70

TH SCREWS

REF: B1T

For FHC screws, aluminum washers: Ø 6mm black - Ø 6 mm narrow black Ø 6 mm titanium - Ø 8 mm black - Ø 8 mm large black - Ø 10 mm black For CHC screws, washers: Platic Ø 6 mm black - Aluminum Ø 6 mm black

5x16 - 5x30 - 6x20 - 6x30 - 6x40 - 8x25 - 8x40 - 8x50 - 8x75 - 10x20 - 10x45 10x80

REF: PC0711.10D

PLASTIC PLUG

REF: PC0113.00D For pedal: Ø 10 mm - Ø 12 mm For tube: Ø 16 mm - Ø 20 mm - Ø 26 mm - Ø 28 mm - Ø 30 mm - Ø 32 mm

GRUB SCREWS

REF: B1P 4x4 / Pitch: 0,7 - 5x6 / Pitch: 0,8 - 6x6 / Pitch: 1 - 6x6 dog point - Pitch: 1 - 8x30 / Pitch: 1,25 ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

STUB AXLES – BALL JOINTS – TIE RODS

FEMALE BALL JOINT

REF: PC0231.00D Available in 8 mm diameter (right hand thread and left hand thread).

MALE BALL JOINT

REF: PC0232.00D Available in 6 mm, 8 mm and 10 mm diameters (right hand thread and left hand thread).

D10 BALL JOINT

REF: PC0232.012 For bottom of steering column. High quality.

M20 NUT

REF: B2.N20ENC For stub axle with 25 mm shaft.

TEKNEEX 17 MM DIAMETER STUB AXLE

REF: PC0211.02M Right and left stub axle available.

BEARING FOR 17 MM DIAMETER STUB AXLE

REF: B9.6000-2Z

TEKNEEX 25 MM DIAMETER STUB AXLE

REF: PC0211.04M Right and left stub axle available.

BEARING FOR 25 MM DIAMETER STUB AXLE

REF: B9.6002-2Z

Take 2 caster/camber pills to have the value of angle degree change.

HEXAGONAL ALUMINIUM TIE ROD

CASTER/CAMBER PILLS

REF: PC0221.03L Hexagonal rod for male M8 ball joint. Anodized Titanium-coloured.

REF: PC0213.09M Sold individually.

Lengths: 266 mm - 250 mm - 245 mm - 225 mm

Types: 0° - 1° - 2° - 3° - 4° - 5° - 6°

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

PEDALS AND ACCESSORIES TOP

QUALITY

A B

SET OF ALUMINIUM ADJUSTABLE PEDALS

REF: PC0423.057 Optimum solution to adjust the pedals of competition karts. Adjustable machined aluminium crankset, adapted for 7 to 15 years old drivers. Can be mounted on the steering triangle (without additionnal hole in the floor). 2 attachment points : entraxe of 45 mm. 4 adjustments are possible: - Forward / afterward adjustibility - Crankset height adjustibility - Feet height position (adjustable) - Progressive crankset system (5 adjustable positions)

SET OF HEEL RESTS

SET OF ENVELOPING HEEL RESTS

REF: PC0424.004

REF: PC0424.007

Dimensions: Width: 2,3 cm Length: 9,8 cm - Height: 2,8 cm

Dimensions: Width: 11,5 cm Length: 11 cm - Height: 4 cm

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

HEEL RESTS KIT

REF: PC0424.018 Center distance between fixing screws: 45 mm. Screws diameter: 6mm. Fits most chassis.

PEDAL EXTENSION

REF: PC0424.035 Aluminium black anodized skid-proof pedal extensions. For pedal of maximum diameter 14mm of tube. Delivered with 2 set screws. Sold individually.

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

P RICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

ENGINES 80 Rotax engines 82 Iame engines 83 TM engines 84 Honda engines 87 SA engines

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

ROTAX ENGINES

FFSA 125 MICRO MAX ROTAX

REF: M01.50 Single cylinder, 2-stroke, integrated thermostat, reed valve intake, oil-in-fuel lubrication, balance shaft, digital battery ignition, liquid cooling and integrated water pump, integrated electric starter, dry centrifugal clutch, right drive, red cylinder head, numbered identification plate and FFSA lead. BORE STROKE

54.00 mm 54.50 mm DISPLACEMENT 124.8 cm3 MAX HORSE POWER 6.8 Hp at 6.500 Rpm (5 kW) MAX TORQUE 8 Nm at 5.500 Rpm

CLUTCH Dry centrifugal clutch INTAKE SILENCER With air filter MIXTURE 2% of synthetic oil WEIGHT 12kg without accessories

ROTAX engines: All engines are delivered complete with: Carburettor, fuel pump, exhaust silencer, radiator, hoses, battery and battery holder, charger and adaptor.

REF: M01.46 / M01.45 Single cylinder, 2-stroke, integrated thermostat, reed valve intake, oil-in-fuel lubrication, balance shaft, digital battery ignition, liquid colling and integrated water pump, integrated electric starter, dry centrifugal clutch, right drive, red cylinder head and numbered identification plate. REFERENCE BORE STROKE DISPLACEMENT MAX HORSE POWER MAX TORQUE CLUTCH INTAKE SILENCER MIXTURE WEIGHT

FFSA 125 MINI MAX ROTAX

FRENCH CLASS: MINIME M01.46 54.00 mm 54.50 mm 124.8 cm3 11 Hp at 8.500 Rpm (8kW) 10 Nm at 7.500 Rpm Dry centrifugal clutch With air filter 2% of synthetic oil 12 kg without accessories

FRENCH CLASS: CADET M01.45 54.00 mm 54.50 mm 124.8 cm3 16.5 Hp at 8.500 Rpm (12kW) 12 Nm at 7.500 Rpm Dry centrifugal clutch With air filter 2% of synthetic oil 12 kg without accessories

FFSA J 125 MAX ROTAX

REF: M01.32 Single cylinder, 2-stroke, integrated thermostat, reed valve intake, oil-in-fuel lubrication, balance shaft, digital battery ignition, liquid colling and integrated water pump, integrated electric starter, dry centrifugal clutch, right drive, red cylinder head and numbered identification plate. 54.00 mm BORE 54.50 mm STROKE DISPLACEMENT 124.8 cm3 MAX HORSE POWER 21.5 Hp at 8.500 Rpm (16kW) MAX TORQUE 17 Nm at 8.500 Rpm

CLUTCH INTAKE SILENCER MIXTURE WEIGHT

Dry centrifugal clutch With air filter 2% of synthetic oil 12 kg without accessories

ROTAX engines: All engines are delivered complete with: Carburettor, fuel pump, exhaust silencer, radiator, hoses, battery and battery holder, charger and adaptor.

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

MAX RACING ROTAX

REF: M01.21 Single cylinder, 2-stroke, integrated thermostat, reed valve intake, oil-in-fuel lubrication, balance shaft, digital battery ignition, liquid cooling and integrated water pump, pneumatic adjusted exhaust valve, integrated electric starter, dry centrifugal clutch, right drive, black cylinder head and numbered identification plate. 54.00 mm BORE 54.50 mm STROKE DISPLACEMENT 124.8 cm3 MAX HORSE POWER 28.5 Hp at 11.500 Rpm (21kW) MAX TORQUE 21 Nm at 8.750 Rpm

CLUTCH INTAKE SILENCER MIXTURE WEIGHT

Dry centrifugal clutch With air filter 2% of synthetic oil 12 kg without accessories

ROTAX engines: All engines are delivered complete with: Carburettor, fuel pump, exhaust silencer, radiator, hoses, battery and battery holder, charger and adaptor.

NEW - 2015

ROTAX 125 MAX EVO

REF: M01.23 Single cylinder, 2-stroke, integrated thermostat, reed valve intake, oil-in-fuel lubrication, balance shaft, digital battery ignition, liquid cooling and integrated water pump, electronically controlled exhaust valve, integrated electric starter, dry centrifugal clutch, right drive, black cylinder head and numbered identification plate. BORE 54.00 mm STROKE 54.50 mm DISPLACEMENT 124.8 cm3 MAX HORSE POWER 30 Hp at 11.500 Rpm (21 kW) MAX TORQUE 21 Nm at 9.000 Rpm

CLUTCH INTAKE SILENCER MIXTURE WEIGHT

Dry centrifugal clutch With air filter 2% of synthetic oil 12 kg without accessories

ROTAX 125 MAX DD2 EVO

REF: M01.42 Single cylinder, 2-stroke, integrated thermostat, reed valve intake, oil-infuel lubrication, balance shaft, digital battery ignition, liquid cooling and integrated water pump, electronically controlled exhaust valve, integrated electric starter, centrifugal oil bath, 2-speed gearbox, ESA (Electric Shifting Assistance), black cylinder head and numbered identification plate. BORE 54.00 mm STROKE 54.50 mm DISPLACEMENT 124.8 cm3 MAX HORSE POWER 34 Hp at 12.000 Rpm (24 kW) MAX TORQUE 22 Nm at 10.500 Rpm

CLUTCH INTAKE SILENCER MIXTURE WEIGHT

Centrifugal oil bath With air filter 2% of synthetic oil 16.8 kg without accessories

ROTAX engines: All engines are delivered complete with: Carburettor, fuel pump, exhaust silencer, radiator, hoses, battery and battery holder, charger and adaptor.

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

IAME ENGINES

PARILLA X30 ENGINE

REF: M04.30 Single cylinder, 2-stroke, liquid cooling. Delivered complete with: Tryton carburettor, cooling system, air box, exhaust and exhaust silencer, battery, throttle cable. BORE STROKE DISPLACEMENT MAX HORSE POWER MAX TORQUE CLUTCH FUEL MIXTURE WEIGHT

54.00 mm 54.00 mm 125 cm3 30 Hp at 11.000 ~ 11.250 Rpm 19.5 Hp at 10.250 ~ 10.500 Rpm Dry centrifugal clutch Unleaded gasoline 4% synthetic oil 12 kg without accessories

PARILLA X30 SUPER SHIFTER 175 ENGINE

REF: M04.32 Single cylinder, 2-stroke, liquid cooling, 6-speed gearbox Delivered with: Complete wiring harness, complete electronic injection (with battery), dell Orto VHSH 36 carburettor, fuel pump, exhaust with header and exhaust silencer, plate, radiator. BORE STROKE DISPLACEMENT MAX HORSE POWER MAX TORQUE CLUTCH FUEL MIXTURE WEIGHT

63.92 mm 54.40 mm 174,56 cm3 N/A N/A Dry clutch Unleaded gasoline 4% synthetic oil 20 kg without accessories

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

TM ENGINES

CLASS

-KZ10 B-

CLA

KZ125-KZ1-KZ2 C

CLASS

-KZ10 ES· S

LA C

-KZ10 ES-

CLA

LEISURE

TM 125 KZ10 B ENGINE

REF: M06.20 Single cylinder, 2-stroke, water-cooled, 6-speed gearbox, valve cartridges intake, D20 crankshaft’s conrod, standard bearings. Delivered complete with: Carburettor, exhaust and exhaust silencer, fuel pump, water pump, radiator, plate, water hose. Air box not delivered. BORE STROKE DISPLACEMENT CLUTCH FUEL MIXTURE WEIGHT

TM 125 KZ10 B MODIFIED FACTORY ENGINE

REF: M06.21 Based on stock engine TM 125 KZ10 B + Additional modification: - D22 crankshaft’s conrod - Roller bearings - Manufactured carter and cylinder - 4° angled piston and cylinder head - Shortened valve cartridges and exhaust manifold

54.07 mm 54.43 mm 124.59 cm3 Dry clutch Unleaded gasoline 5% synthetic oil 18 kg

ORDER ON-LINE ON WWW.ITAKASHOP.COM

REF: M06.22 Single cylinder, variable electronic ignition with 13 500 rpm limiter, electric starter, 2-stroke, water-cooled, 6-speed gearbox, valve cartridges intake. Delivered complete with: Carburettor, exhaust and exhaust silencer, battery, fuel pump, water pump, radiator, plate, water hose. Air box not delivered. BORE STROKE DISPLACEMENT CLUTCH FUEL POWER MIXTURE WEIGHT

CONTACT THE NEAREST ITAKASHOP STORE

TM 125 KZ10 ES LEISURE ENGINE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

54.07 mm 54.43 mm 124.59 cm3 Dry clutch Unleaded gasoline 40 Hp 5% synthetic oil 20 kg

NEED SOME HELP ? +33 (0)2 40 38 26 20

HONDA ENGINES RE

COMMEND

HONDA engines: Prepared version available for SODI gokarts. Visit our website WWW.ITAKASHOP.COM

KARTLUB EN

DED

· RE C

page 143

· RECOMM

ENDED ·

OIL

HONDA ENGINE GX120 UT2 RHQ4

REF: M08.041 HONDA FUEL TANK INCLUDED HONDA EXHAUST INCLUDED RECOIL POSITION REAR REDUCER INCLUDED COIL FOR RECHARGE BATTERY NOT INCLUDED ADAPTED COIL KART YES

RE ENDED ·

OIL

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

· RE C

HONDA FUEL TANK NOT INCLUDED HONDA EXHAUST INCLUDED RECOIL POSITION VERTICAL REDUCER INCLUDED COIL FOR RECHARGE BATTERY NOT INCLUDED ADAPTED COIL KART YES

DED

REF: M08.03

page 143

KARTLUB

· RECOMM

HONDA ENGINE GX160 RT2 RHG4

E D

COMMEND

ENDED ·

OIL

· RE C

page 143

KARTLUB DED

REF: M08.78

COMMEND

· RECOMM

HONDA ENGINE GX200 RT2 RDG4 OH

HONDA FUEL TANK NOT INCLUDED HONDA EXHAUST INCLUDED RECOIL POSITION VERTICAL REDUCER INCLUDED COIL FOR RECHARGE BATTERY NOT INCLUDED ADAPTED COIL KART YES

Attention: Engines delivered with coil for accessories. The coil provides up to 30 volts. Has to use a voltage limiter reference. REF: PC0712.073

VOLTAGE LIMITER

REF: PC0712.073

HONDA engines: Prepared version available for SODI gokarts. Visit our website WWW.ITAKASHOP.COM

HONDA ENGINE GX200 UT2 SHQ4

REF: M08.22 HONDA FUEL TANK INCLUDED HONDA EXHAUST INCLUDED RECOIL POSITION REAR REDUCER NOT INCLUDED COIL FOR RECHARGE BATTERY NOT INCLUDED ADAPTED COIL KART YES

COMMEND

DED

· RE C

page 143

KARTLUB

· RECOMM

ENDED ·

OIL

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

HONDA ENGINES HONDA engines: Prepared version available for SODI gokarts. Visit our website WWW.ITAKASHOP.COM

A RE

COMMEND

DED

· RE C

page 143

KARTLUB

· RECOMM

ENDED ·

OIL

DED

· RE C

ENDED ·

MM O

REF: M08.70

HONDA ENGINE GX270 UT2 SHQ5

REF: M08.73

HONDA FUEL TANK HONDA EXHAUST RECOIL POSITION REDUCER COIL FOR RECHARGE BATTERY ADAPTED COIL KART

NOT INCLUDED NOT INCLUDED VERTICAL INCLUDED INCLUDED YES

Attention: Engines delivered with coil for accessories. The coil provides up to 30 volts. Has to use a voltage limiter. REF: PC0712.073 (See page 85)

page 143

KARTLUB · RE C

HONDA ENGINE GX270 RT2 RDG4 OH

OIL

· RECOMM

page 143

KARTLUB

· RECOMM

OIL

COMMEND

DED

HONDA FUEL TANK HONDA EXHAUST RECOIL POSITION REDUCER COIL FOR RECHARGE BATTERY ADAPTED COIL KART

HONDA ENGINE GX390 RT2 SDQ5 OH

REF: M08.75 INCLUDED INCLUDED REAR NOT INCLUDED NOT INCLUDED YES

Attention: To power up your accessories, please order the power coil. REF: PM362.012

HONDA FUEL TANK HONDA EXHAUST RECOIL POSITION REDUCER COIL FOR RECHARGE BATTERY ADAPTED COIL KART

NOT INCLUDED NOT INCLUDED REAR NOT INCLUDED INCLUDED YES

Attention: Engines delivered with coil for accessories. The coil provides up to 30 volts. Has to use a voltage limiter. REF: PC0712.073 (See page 85)

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

SA ENGINES SA engines: Other 250 cc 4-stroke engines are available. Visit our website WWW.ITAKASHOP.COM Transmission: Use with damping sprocket carrier reference. PC0281.510 (See page 65)

4-STROKE OIL

DED

路 RE C

page 143

4-STROKE 0W30

路 RECOMM

ENDED 路

COMMEND

SA 250 SE 32I ENGINE

REF: M20.07 250 cc variable power setting engine, 4-stroke- electronic injection. Ideal for leisure or competition. Single cylinder, 4-stroke with nikasil liner. Built-in water pump. Four valves. Double overhead camshaft. Electronic ignition with speed governor. Battery charging generator. Electric starter. Power setting from 15 to 28 hp. Delivered complete with: Aluminum exhaust silencer, radiator and radiator holder, battery and battery holder BORE STROKE

75.00 mm 56.50 mm DISPLACEMENT 249.6 cm3 MAX HORSE POWER 28 Hp (setting: 15, 22 and 28 hp) MAX TORQUE 7.4 Nm at 8.800 Rpm

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

CLUTCH WEIGHT

Centrifugal dry type with chain drive type 219 (7.774 pitch) 22 kg without accessories

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

P RICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

ENGINE SPARE PARTS 90 Rotax Max Racing / J125

Max / MiniMax

MicroMax engine spare parts

96 Rotax DD2 engine

spare parts

102 Engine spare parts IAME Parilla-X30 106 TM KZ10 / KZ10B / KZ10ES

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

engine spare parts

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

ROTAX ENGINE SPARE PARTS

MAX RACING J 125 MAX MINIMAX MICROMAX B

CRANKSHAFT - PISTON WATER PUMP

B CRANKCASE - WATER PUMP

STARTER

N° Reference Designation

1 PMFR331.002 CRANKSHAFT ASSY 2 PMFR331.001 BALANCE SHAFT 3 PMFR313.004 O-RING 18X3.5 4 PMFR382.050 STEEL BALANCING GEAR 5 PMFR401.006 DRIVE GEAR 19 T 5 PMFR401.016 PLASTIC WATER PUMP GEAR 19 T 6 PMFR382.162 RETAINING RING 20X1.2 7 PMFR401.010 THRUST WASHER 10.1/17/1 8 PMFR401.008 NEEDLE PIN 4X15.8 9 PMFR401.005 WATER PUMP PINION 16 T 10 PMFR401.007 IDLE GEAR 28/13 T 11 PMFR311.003 JGASKET 12A PMFR311.002 GEARBOX COVER BEFORE 2013 12B PMFR311.008 GEARBOX COVER FROM 2013 13 PMFR411.002 ALLEN SCREW M6X16 14 PMFR411.005 ALLEN SCREW M6X30 DIN 912 15 PMFR311.005 GASKET RING 6X10 16 PMFR326.102 NEEDLE CAGE 15X19X20 17 PMFR324.397 PISTON ASSY 53.97 17 PMFR324.398 PISTON ASSY 53.98 17 PMFR324.399 PISTON ASSY 53.99 17 PMFR324.400 PISTON ASSY 54.00 18 PMFR325.001 RECTANGULAR RING IS2-52/49.4X1 19 PMFR326.001 PISTON PIN 15X10/12.5X45.6 20 PMFR327.001 CIRCLIP 15 21 PMFR332.001 CRANKSHAFT REPAIR SET 22 PMFR393.003 IMPULSE FITTING

1a 1b 2 3 4 5 6 7 8 9 10 11 12 13 16

PMFR311.001 PMFR311.007 PMFR312.001 PMFR312.002 PMFR313.003 PMFR313.002 PMFR315.003 PMFR315.001 PMFR315.002 PMFR314.002 PMFR411.010 PMFR329.004 PMFR401.003 PMFR401.020 PMFR401.009

CRANKCASE ASSY BEFORE 2013 CRANKCASE ASSYY FROM 2013 PIN 8X12 DIN 5402 CAP Ø20 DIN443 OIL SEAL 28X38X7 OIL SEAL 25X38X7 BALL BEARING BALL BEARING 6302 BALL BEARING 6005 THRUST WASHER TIGHTENING TORQUE 6MM LOCATING PIN 6X40 OIL SEAL 10X26X7 WATER PUMP SHAFT ASSY SLOTTED SPRING PIN D4 L16

N° Reference Designation 17 PMFR313.001 GASKET 18 B1.C0645P ZINC SCREW CHC 6X45 8.8 19 B1.C0660 ZINC SCREW CHC 6X60 8.8 20 PMFR314.001 NEEDLE BUSHING 8X12X8 21 PMFR314.004 THRUST WASHER 8.5X15X0.5 22 PMFR363.005 STARTER REDUCTION GEAR ASSY 23 PMFR383.012 CHAIN PROTECTION COVER 24 PMFR411.004 ALLEN SCREW M6X25 25 PMFR402.000 TUBE 26 PMFR329.003 STUD M8X57/20 27 PMFR329.002 STUD M8X28/20 28 PMFR329.103 STUD M8X28/20 29 PMFR311.004 AIR VENT SCREW M18X1.5 30 PMFR328.001 GASKET SET ASSY FOR THE ENGINE

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

MAX RACING J 125 MAX MINIMAX MICROMAX

CYLINDER

N° Reference Designation

C Q 1 1 1 1 1 2 2 2 2 2 2 3 4 5 6 7 8 9

10 PMFR374.013 HOSE SPRING 70-1.7-0.3 11 PMFR374.006 BELLOWS 12 PMFR374.007 EXHAUST VALVE PISTON 13 PMFR374.008 HOSE SPRING 134-2.3-0.4-0.0 14 PMFR374.009 COMPRESSION SPRING 42.5/0.8MM 15 PMFR374.002 VALVE COVER 16 PMFR374.011 ADJUSTMENT SCREW 17 PMFR374.001 SPRING CLIP 18 PMFR329.104 COLLAR NUT M8 19 PMFR328.007 O-RING 64X2 20 PMFR322.004 COMBUSTION CHAMBER INSERT 21 PMFR413.003 LOCK WASHER A8 22 PMFR411.011 HEX. SCREW M8X30 DIN 933 23 PMFR328.006 O-RING 23.3X2.4 24 PMFR328.005 O-RING 105X2.5 26 PMFR411.002 ALLEN SCREW M6X16 27 PMFR411.013 ALLEN SCREW M6X25 WITH HOLE 28 PMFR322.001 PLUG SCREW 1/8-27 TORQUE 10 NM 29 PMFR354.001 GASKET 30 PMFR351.001 REED VALVE ASSY

32 PMFR352.001 REED PETAL 34 PMFR411.009 SLOTTED HEAD SCREW M3X6 35 PMFR351.002 CARBURETTOR FLANGE 42.5 MM 36 B1.C0625 ZINC SCREW CHC 6X25 8.8 37 PMFR411.013 ALLEN SCREW M6X25 WITH HOLE 38 PMFR392.008 CLAMP 50/70 39 PMFR373.001 GASKET 40 PMFR372.001 EXHAUST SOCKET ASSY 41 PMFR411.008 ALLEN SCREW M8X20 42 PMFR322.121 THERMOSTAT 43 PMFR322.122 THERMOSTAT HOLDER 44 PMFR322.123 THERMOSTAT SPRING 45 PMFR322.124 THERMOSTAT RETAINING BRACKET 46 B1.T0408 SCREW M4X8 48 PMFR434.001 CYLINDER KIT SUPERMAX 50 PMFR328.008 GASKET SET 51 PMFR329.105 COLLAR NUT M8 FOR MICROMAX 52 PMFR329.005 WASHER 8.4 53 PMFR328.013 RESTRICTION PLATE MICROMAX 54 PMFR374.015 D18 EXHAUST RESTICTOR 55 PMFR372.003 D22 EXHAUST RESTICTOR

LU861.003 LOCTITE 648 GREEN 5 GR LU851.003 SILASTIC 732RTV 100 GR PMFR328.012 GASKET 0.2 MM PMFR328.002 GASKET 0.3 MM PMFR328.011 GASKET 0.4 MM PMFR328.003 GASKET 0.5 MM PMFR328.004 GASKET 0.8 MM PMFR321.000 CYLINDER ‘A’ PMFR321.001 CYLINDER ‘B’ PMFR321.002 CYLINDER ‘AB’ PMFR321.003 JUNIOR ENGINE CYLINDER ‘A’ PMFR321.004 JUNIOR ENGINE CYLINDER ‘B’ PMFR321.005 JUNIOR ENGINE CYLINDER ‘AB’ PMFR411.000 STUD M6X45.5 PMFR374.004 EXHAUST VALVE PMFR374.005 O-RING 6X3 PMFR344.001 GASKET PMFR374.003 VALVE ROD HOUSING PMFR383.009 SPRING WASHER B6 PMFR411.002 ALLEN SCREW M6X16

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

ROTAX ENGINE SPARE PARTS

MAX RACING J 125 MAX MINIMAX MICROMAX D

CLUTCH SPROCKET

IGNITION UNIT STARTER - BATTERY

N째 Reference Designation

0 PMFR381.050 KIT CLUTCH 125 MAX C LU861.003 LOCTITE 648 GREEN 5 GR 1 PMFR381.003 STARTER GEAR ASSY 2 PMFR383.004 HEX.NUT M20X1.5DIN936 TORQ.100 3 PMFR382.030 FLY WEIGHT 4 PMFR411.015 ALLEN SCREW M6X12 5 PMFR382.008 SPROCKET 13 TEETH (PIN) 5 PMFR382.011 SPROCKET 11 TEETH 5 PMFR382.009 SPROCKET 14 TEETH (PIN) 5 PMFR382.015 SPROCKET 15 TEETH (PIN) 5 PMFR382.016 SPROCKET 16 TEETH (PIN) 5 PMFR382.007 SPROCKET 12 TEETH (PIN) 6 PMFR382.010 NEEDLE PIN D5 L5 7 PMFR382.001 CLUTCH DRUM 8 PMFR382.003 HEX.NUT TIGH.TORQUE 12NM+1TURN 9 PMFR326.103 NEEDLE CAGE 15X19X17 10 PMFR415.001 PLAIN BEARING 11 T 11 PMFR382.114 O-RING 12 PMFR314.003 THRUST WASHER 15.2/25/1 13 PMFR413.002 THRUST WASHER 10/22/1.5 14 PMFR383.005 HEX.NUT M10X1DIN934TIG.TOR60NM 15 B3.P1019 THRUST WASHER d10 D19 1.5

1 2 3 4 5 6 7 7 7 7 8 9 10 11 12 13 14 16 17 18 21 22

22 23 23 24 27 29 30 31 32 33 34 35 40 41 42 43 44

PMFR362.002 PMFR411.002 PMFR362.003 PMFR362.001 PMFR362.004 PMFR366.001 PM366.010 PM366.013 PM366.011 PM366.012 PMFR365.013 PMFR413.001 B2.N06 PMFR363.003 PMFR363.011 PMFR365.104 PMFR363.006 PMFR363.004 PMFR363.001 PMFR364.023 PMFR364.020 PMFR364.013

PICK UP ALLEN SCREW M6X16 RUBBER BUFFER 25X20XM6 IGNITION COIL INGNITION CABLE 360MM SPARK PLUG CONNECTOR DENSO SPARK PLUG IW27 DENSO SPARK PLUG IW29 DENSO SPARK PLUG IW31 DENSO SPARK PLUG IW34 MASS CABLE WASHER 6.4 DIN 134 ZINC NUT M6 NYLSTOP ELECTRIC STARTER ASSY STARTER SUPPORT CABLE ASSY REPAIRING SET ELECTRIC STARTER AUTOMATIC FUSE START BUTTON BATTERY CLAMP PIPE CLAMP PIPE CHAMP D30

PMFR364.014 PMFR364.025 PMFR364.026 PMFR364.018 PMFR365.003 PMFR364.015 B1.C0620 PMFR413.001 B2.N06 B2.N06 PMFR364.002 PMDD364.001 PMFR364.016 PMFR364.019 PMFR364.022 PMFR364.027 PMFR364.028

PIPE CHAMP D32 RUBBER PAD BEFORE 2008 RUBBER PAD FROM 2008 BATTERY 12V YUASA YT7B-BS CABLE HARNESS BLACK BATTERY COVER ZINC SCREW CHC 6X20 8.8 WASHER 6.4 DIN 134 ZINC NUT M6 NYLSTOP ZINC NUT M6 NYLSTOP BATTERY CHARGER ELECTRICAL ADAPTOR EURO CONNECTOR CABLE + PROTECTION BATTERY CONNECTOR <2007 BATTERY CONNECTOR 2007 BATTERY-LITHIUM 12V 2.3AH LITHIUM BATTERY CHARGER

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

MAX RACING J 125 MAX MINIMAX MICROMAX

CARBURETTOR AND FUEL PUMP

N° Reference Designation

1 2 3 4 5 6 7 12 13 14 15 15 15 15 15 15 15 15 15 15 15 15

15 15 15 15 15 15 16* 16 17* 17 19 21 22 23* 23 25 26 27 28 29 30 31

32 33 34 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55

PMFR391.001 CA121.010 CA135.004 CA135.001 CA121.011 CA121.012 CA122.010 CA122.016 CA143.010 CA143.021 CA153.140 CA153.145 CA153.150 CA153.152 CA153.155 CA153.158 CA153.160 CA153.162 CA153.165 CA153.168 CA153.170 CA153.172

DELL’ORTO CARBURETTOR VHSB 34 CARBURETTOR SLIDE JET NEEDLE K98 NEEDLE CLIP FOR DELL’ORTO NIPPLE SCREW SPRING VHSB34 CARBURETTOR COVER VHSB34 COVER RUBBER VHSB34 NEEDLE JET MAIN JET CUP VHSB34 MAIN JET 140 VHSB34 MAIN JET 145 VHSB34 MAIN JET 150 VHSB34 MAIN JET 152 VHSB34 MAIN JET 155 VHSB34 MAIN JET 158 VHSB34 MAIN JET 160 VHSB34 MAIN JET 162 VHSB34 MAIN JET 165 VHSB34 MAIN JET 168 VHSB34 MAIN JET 170 VHSB34 MAIN JET 172

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CA153.175 CA153.178 CA153.180 CA153.185 CA153.190 CA153.195 CA143.011 CA143.012 CA153.030 CA153.060 CA142.100 CA141.003 CA141.100 CA144.001 CA144.002 CA124.001 CA134.015 CA134.014 CA171.012 CA171.011 CA151.107 CA151.207

CONTACT THE NEAREST ITAKASHOP STORE

VHSB34 MAIN JET 175 VHSB34 MAIN JET 178 VHSB34 MAIN JET 180 VHSB34 MAIN JET 185 VHSB34 MAIN JET 190 VHSB34 MAIN JET 195 IDLE JET INSERT 30 IDLE JET INSERT 60 VHSB34 JET 30 VHSB34 JET 60 NEEDLE VALVE 150 FLOAT BRACKET FLOAT PIN FLOAT VHSB34 5.2G FLOAT VHSB34 3.6 G FLOAT CHAMBER PLUG SCREW RING PLUG SCREW LOCK WASHER SLOTTED HEAD SCREW COMPRESSION SPRING ADJUSTMENT SCREW

CA134.011 CA134.013 CA134.012 CA121.020 CA121.021 PMFR391.005 PMFR392.006 PMFR393.103 PMFR393.002 CA133.004 PMFR393.101 PMFR394.001 PMFR393.004 PMFR393.005 PMFR391.006 PMFR391.007 PMFR391.008 CA153.130 CA134.016 CA134.017 CA152.003

SHIPMENTS WITHIN 24H (see the practical guide page 4)

FUEL FILTER FUEL FILTER CAP GASKET FUEL FILTER CAP VHSB 34 STARTER COUNTERSUNK SCREW INTAKE RESTRICTOR GASKET SET FOR THE CARBURETTOR THROTTLE CABLE FIX KIT FUEL PUMP PUMP REPAIR KIT TUBE CABLE BOWDEN ASSY FUEL FILTER AIR VENT HOSE 180MM CARBURATOR STOP SLEEVE FIXATION PLATE INTAKE RESTRICTOR MINIMAX VHSB34 MAIN JET 130 PLUG SCREW FLOAT CHAMBER JOINT CARBURETOR INSERT KIT 8.5

NEED SOME HELP ? +33 (0)2 40 38 26 20

ROTAX ENGINE SPARE PARTS

MAX RACING J 125 MAX MINIMAX MICROMAX

H G

RADIATOR (WITH THERMOSTAT)

INTAKE SILENCER

N째 Reference Designation

1 2 4 5 6 7 9 10 12 14 15 16 17 18 19 21 22 23

1 2 3 4 5 6 7 8 9 10 11

PMFR402.016 PMFR402.101 PMFR402.022 PMFR401.013 PMFR402.002 PMFR402.102 B1.C0620R B2.N06 PMFR413.003 PMFR411.012 PMFR432.003 PMFR402.013 B1.B0616RT PMFR413.001 PMFR402.014 PMFR402.023 PMFR402.024 PMFR402.025

RADIATOR MAX RADIATOR CAP RUBBER GROMMET COOLING-WATER HOSE CLAMP 23/12 CLAMP 27/9 ALLEN SCREW M6X20 WITH FLANGE ZINC NUT M6 NYLSTOP LOCK WASHER A8 ALLEN SCREW M8X75 SPACER WINDSHIELD PANHEAD SCREW BHC 6X16 DIN 603 WASHER 6.4 DIN 134 RADIATOR BRACKET RADIATOR MICROMAX RADIATOR BRACKET-MICROMAX WINDSHIELD-MICROMAX

PMFR392.011 PMFR392.004 PMFR392.005 PMFR392.013 PMFR392.012 PMFR392.007 PMFR392.015 PMFR392.014 PMFR413.001 PMFR411.003 PMFR392.008

INTAKE SILENCER CASE BOTTOM INTAKE SILENCER TUBE HOLDER FOR FILTER ELEMENT FILTER ELEMENT INTAKE SILENCER CASE TOP CARBURETTOR SOCKET INTAKE SILENCER CLIP SUPPORT BRACKET WASHER 6.4 DIN 134 ALLEN SCREW M6X20 CLAMP 50/70

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

MAX RACING J 125 MAX MINIMAX MICROMAX

EXHAUST SYSTEM

TOOLS

N° Reference Designation

1 2 3 4 5 6 9 10 11 12

1 3 4 5 6 7 8 10 11 12 13 14 15 22 23 24 26 27 28

ORDER ON-LINE ON WWW.ITAKASHOP.COM

PMFR371.004 PMFR371.030 PMFR371.025 PMFR373.002 B1.C0410 B2.04 PMFR373.006 PMFR371.007 PMFR371.027 PMFR371.031

EXHAUST ROTAX MAX + BRACKET ISOLATING MAT SILENCER COVER SPRING 66MM FOR THE EXHAUST ZINC SCREW CHC 4X10 8.8 NUT M4 SPRING EXHAUST SYSTEM ASSY SILENCER COVER RETROFIT KIT ISOLATING MAT

CONTACT THE NEAREST ITAKASHOP STORE

PMFR421.002 PMFR421.003 PMFR421.012 PMFR421.017 PMFR421.005 PMFR421.014 PMFR421.008 PMFR421.010 PMFR421.011 PMFR421.020 OU921.025 PMFR421.026 PMFR421.027 OU922.005 PMFR421.016 PMFR421.029 PMFR421.030 PMFR421.028 PMFR421.031

FIXATION TOOL FOR CRANKSHAFT PULLER FOR THE STARTER GEAR INSERTION JIG FOR CRANKSHAFT INSERTION JIG INSERTION JIG FOR NEEDLE BUSHI INSERTION JIG FOR PLAIN BEARIN INSERTION TOOL OF PISTON PIN TRESTLE SUPPORT ASSY TRESTLE SUPPORT ASSY SPRING HOOK FOR EXHAUST SPRING CLUTCH TAKE OFF TIN WIRE 3MM TIN WIRE 2MM VALVE SPRING’S TOOL 2009FIXATION TOOL FOR SPROCKET WRENCH ADAPTER 11/8 ARBOR PRESS VENTURI CARBURETOR TEMPLATE JET GAUGE SET

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

ROTAX ENGINE SPARE PARTS

ROTAX DD2

CRANKCASE - CRANKSHAFT WATERPUMP - PISTON

N째 Reference

Designation

N째 Reference

Designation

E 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 23 23 23 24 25 26 27 28

LOCTITE ANTI SEIZE 8151 50ML DD2 CRANKCASE ASSY PIN 8X12 DIN 5402 BALL BEARING 6203 C3 BALL BEARING 6204 PRIMARY SHAFT 24/19 Z OIL SEAL 50X68X8 DD2 BALL BEARING HOLLOW SHAFT DD2 PLAIN BEARING 40X44X20 SHIFTING SLEEVE FROM 2011 IDLE GEAR 81Z FROM 2011 NEEDLE BEARING 52X57X12 IDLE GEAR 77Z FROM 2011 DD2 SHIFT FORK ASSY DD2 GASKET OIL SEAL 12X22X7 SHIFT RAIL DETENT PIN BALL BEARING OIL SEAL 30X42X7/7.5 DD2 CRANKSHAFT ASSY WOODRUFF KEY 3X5 NEEDLE CAGE 15X19X20 PISTON ASSY 53.97 PISTON ASSY 53.98 PISTON ASSY 53.99 PISTON ASSY 54.00 RECTANGULAR RING IS2-52/49.4X1 PISTON PIN 15X10/12.5X45.6 CIRCLIP 15 ZINC SCREW CHC 6X45 8.8 MAGNETIC DRAIN PLUG

29 30 31 32 33 35 37 38 39 40 41 42 43 44 45 46 47

GASKET A 12X18 AIR VENT SCREW M18X1.5 STUD M8X57/20 STUD M8X28/20 STUD M8X28/20 OIL SEAL 10X26X7 SLOTTED SPRING PIN D4 L16 WATER PUMP HOUSING RUBBER RING ZINC SCREW CHC 6X20 8.8 THRUST WASHER 8.5X15X0.5 STARTER REDUCTION GEAR ASSY CRANKSHAFT REPAIR SET DD2 WATERPUMP SHAFT ASSY IMPULSE FITTING GASKET SET ASSY FOR ENGINE DD2 GEARBOX UPGRADE KIT

LU861.004 PMFR311.104 PMFR312.001 PMFR315.101 PMFR315.102 PMFR381.102 PMFR313.102 PMFR315.103 PMFR381.104 PMFR316.001 PMFR382.027 PMFR382.023 PMFR316.011 PMFR382.024 PMFR382.111 PMFR313.101 PMFR382.112 PMFR382.113 PMFR315.003 PMFR313.103 PMFR331.004 PMRO367.003 PMFR326.102 PMFR324.397 PMFR324.398 PMFR324.399 PMFR324.400 PMFR325.001 PMFR326.001 PMFR327.001 B1.C0645P PMFR329.101

PMFR329.102 PMFR311.004 PMFR329.003 PMFR329.002 PMFR329.103 PMFR401.003 PMFR401.009 PMFR401.120 PMFR401.121 B1.C0620 PMFR314.004 PMFR363.005 PMFR332.001 PMFR401.111 PMFR393.003 PMFR328.000 PMFR382.025

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

ROTAX DD2

CYLINDER

N° Reference

Designation

N° Reference

Designation

C Q B 1 1 1 1 2 2 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

LOCTITE 648 GREEN 5 GR SILASTIC 732RTV 100 GR LOCTITE THREAD LOCKING FLUID GASKET 0.3 MM GASKET 0.4 MM GASKET 0.5 MM GASKET 0.8 MM DD2 NYKASIL CYLINDER ‘A’ DD2 NYKASIL CYLINDER ‘B’ DD2 NYKASIL CYLINDER ‘AB’ STUD M6X45.5 EXHAUST VALVE O-RING 6X3 GASKET VALVE ROD HOUSING SPRING WASHER B6 ZINC SCREW CHC 6X16 8.8 HOSE SPRING 70-1.7-0.3 BELLOWS EXHAUST VALVE PISTON HOSE SPRING 134-2.3-0.4-0.0 COMPRESSION SPRING 48.5/0.8MM VALVE COVER ADJUSTMENT SCREW SPRING CLIP COLLAR NUT M8 O-RING 64X2 COMBUSTION CHAMBER INSERT LOCK WASHER A8 ZINC SCREW TH 8X30 10.9 O-RING 23.3X2.4 O-RING 105X2.5

26 27 28 29 30 31 32 33 34 35 37 39 40 41 42 44 45 46 47 48

ZINC SCREW CHC 6X16 8.8 ZINC SCREW CHC 6X25 8.8 PLUG SCREW 1/8-27 TORQUE 10 NM THERMOSTAT THERMOSTAT HOLDER THERMOSTAT SPRING THERMOSTAT RETAINING BRACKET SCREW M4X8 GASKET REED VALVE ASSY REED PETAL SLOTTED HEAD SCREW M3X6 INTAKE SOCKET ALLEN SCREW M6X25 WITH HOLE ZINC SCREW CHC 6X25 8.8 GASKET EXHAUST SOCKET ASSY ZINC SCREW CHC 8X20 8.8 GASKET SET CYL CLAMP 50/70

LU861.003 LU851.003 LU861.001 PMFR328.002 PMFR328.011 PMFR328.003 PMFR328.004 PMFR321.101 PMFR321.102 PMFR321.103 PMFR411.000 PMFR374.004 PMFR374.005 PMFR344.001 PMFR374.003 PMFR383.009 B1.C0616 PMFR374.013 PMFR374.006 PMFR374.007 PMFR374.008 PMFR374.109 PMFR374.002 PMFR374.011 PMFR374.001 PMFR329.104 PMFR328.007 PMFR322.004 PMFR413.003 B1.T0830N PMFR328.006 PMFR328.005

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

B1.C0616 B1.C0625 PMFR322.001 PMFR322.121 PMFR322.122 PMFR322.123 PMFR322.124 B1.T0408 PMFR354.001 PMFR351.001 PMFR352.001 PMFR411.009 PMFR351.102 PMFR411.013 B1.C0625 PMFR373.001 PMFR372.001 B1.C0820 PMFR328.008 PMFR392.008

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

ROTAX ENGINE SPARE PARTS

ROTAX DD2

STEERING WHEEL HUB SHIFTING AND TRANSMISSION

39 40 41 42 43

B1.C0660 PMFR432.010 PMFR431.012 B2.N05H B1.C0525

ZINC SCREW CHC 6X60 8.8 RETROFIT KIT DD2 2010 COUPLING FLANGE ASSY ZINC NUT M5 NYLSTOP HIGH TYPE ZINC SCREW CHC 5X25

N째 Reference Designation C 2 6 7 8 9 10 11 12 13 14 15 19 20 21 22 26 27 28 29 30 31 32 33 34 35 36 37 38

LU861.003 PMFR316.001 B1.C0625 PMFR431.008 PMFR431.009 PMFR432.041 PMFR383.009 B1.T0612 PMFR432.013 PMFR432.014 PMFR411.017 PMFR413.005 PMFR431.011 PMFR431.010 B1.C0870P PMFR432.015 PMFR432.016 B1.C0660 PMFR432.017 PMFR314.004 PMFR383.009 B2.N06 PMFR432.018 B3.P0614 B1.C0616 PMFR432.019 PMFR411.018 PMFR432.011 PMFR432.012

LOCTITE 648 GREEN 5 GR DD2 PLAIN BEARING 40X44X20 ZINC SCREW CHC 6X25 8.8 THRUST WASHER 40/50/1.5 CLAMPING RING RETAINING PLATE SPRING WASHER B6 SCREW TH 6X12 SHIFT CONTACT ASSY FUEL TUBE 8 MM PLASTITE SCREW 6X25 WASHER 3.8X14X2 DISTANCE TUBE 10/18/49.5 SHIFT CONTACT GUIDANCE ZINC SCREW CHC 8X70 8.8 BOWDEN CABLE ASSY CONTROL WHIP ZINC SCREW CHC 6X60 8.8 SPACER THRUST WASHER 8.5X15X0.5 SPRING WASHER B6 ZINC NUT M6 NYLSTOP CONTROL LEVER ZINC FLAT WASHER d6 D14 EP1.2 ZINC SCREW CHC 6X16 8.8 ROPE ABUTMENT SET SCREW M6X8 WASHER DISTANCE SLEEVE

CENTRIFUGAL CLUTCH

N째 Reference Designation 0 E C B 1 2-3 4 5 6 7 8 8 8 8 8 8 8 9 9 9 9 9 9

PMFR381.060 LU861.004 LU861.003 LU861.001 PMFR382.162 PMFR382.150 PMFR381.100 PMFR382.042 PMFR382.034 PMFR411.016 PMFR381.119 PMFR381.120 PMFR381.121 PMFR381.122 PMFR381.123 PMFR381.124 PMFR381.125 PMFR382.142 PMFR382.143 PMFR382.144 PMFR382.145 PMFR382.146 PMFR382.147

KIT CLUTCH 125 MAX DD2 LOCTITE ANTI SEIZE 8151 50ML LOCTITE 648 GREEN 5 GR LOCTITE THREAD LOCKING FLUID RETAINING RING 20X1.2 DD2 BALANCING GEAR STARTER GEAR 70T. ASSY HEX NUT M22X1.5X6 DD2 FLY WEIGHT ALLEN SCREW M6X16 SECONDARY GEAR 59T SECONDARY GEAR 60T SECONDARY GEAR 61T SECONDARY GEAR 62T SECONDARY GEAR 63T SECONDARY GEAR 64T SECONDARY GEAR 65T CLUTCH DRUM WITH DRIVE GEAR 32 FROM 2009 CLUTCH DRUM WITH DRIVE GEAR 33 FROM 2009 CLUTCH DRUM WITH DRIVE GEAR 34 FROM 2009 CLUTCH DRUM WITH DRIVE GEAR 35 FROM 2009 CLUTCH DRUM WITH DRIVE GEAR 36 FROM 2009 CLUTCH DRUM WITH DRIVE GEAR 37 FROM 2009

9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

PMFR382.148 PMFR382.043 PMFR382.114 PMFR314.003 PMFR311.106 PMFR415.002 PMFR315.001 PMFR311.006 PMFR313.112 PMFR313.111 PMFR311.103 B1.C0630 PMFR432.043 B1.C0870P PMRO367.003

CLUTCH DRUM WITH DRIVE GEAR 38 FROM 2009 NEEDLE BUSHING 15X19X24 O-RING THRUST WASHER 15.2/25/1 DD2 CLUTCH COVER PIN 5 X10 BALL BEARING 6302 O RING OIL LEVEL SCREW PLUG SCREW DD2 GASKET ZINC SCREW CHC 6X30 8.8 SUPPORT PLATE ZINC SCREW CHC 8X70 8.8 WOODRUFF KEY 3X5

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

ROTAX DD2

IGNITION UNIT STARTER - BATTERY

N° Reference Designation 1 2 3 4-5 6 7 8 9 10 11 12 13 14 15 15 15 15 16 17 18 19 21 23 23 24 27 29 30 31 32 33

PMFR362.002 PMFR432.045 B1.C0620R PMFR363.003 PMFR363.006 B1.C0630 PMFR365.013 PMFR362.102 PMFR362.103 B3.P0614 B2.N06 PMFR362.004 PMFR366.001 PM366.013 PM366.010 PM366.011 PM366.012 PMFR363.004 PMFR363.001 PMFR364.023 PMFR364.014 PMFR364.020 PMFR364.025 PMFR364.026 PMFR364.018 PMFR365.003 PMFR364.015 B1.C0630 PMFR413.001 B2.06 B2.N06

PICK UP PROTECTION SHIELD ALLEN SCREW M6X20 WITH FLANGE ELECTRIC STARTER ASSY REPAIRING SET ELECTRIC STARTER ZINC SCREW CHC 6X30 8.8 MASS CABLE DD2 RUBBER BUFFER DD2 IGNITION COIL ZINC FLAT WASHER d6 D14 EP1.2 ZINC NUT M6 NYLSTOP INGNITION CABLE 360MM SPARK PLUG CONNECTOR DENSO SPARK PLUG IW29 DENSO SPARK PLUG IW27 DENSO SPARK PLUG IW31 DENSO SPARK PLUG IW34 AUTOMATIC FUSE START BUTTON BATTERY CLAMP PIPE CHAMP D32 PIPE CLAMP RUBBER PAD BEFORE 2008 RUBBER PAD FROM 2008 BATTERY 12V YUASA YT7B-BS CABLE HARNESS BLACK BATTERY COVER ZINC SCREW CHC 6X30 8.8 WASHER 6.4 DIN 134 ZINC NUT M6 ZINC NUT M6 NYLSTOP

ORDER ON-LINE ON WWW.ITAKASHOP.COM

34 35 40 41 42

PMFR364.002 PMDD364.001 PMFR362.104 PMFR364.027 PMFR364.028

BATTERY CHARGER ELECTRICAL ADAPTOR EURO GASKET BATTERY-LITHIUM 12V 2.3Ah LITHIUM BATTERY CHARGER

CARBURATOR AND FUEL PUMP

N° Reference Designation 1 2 3 4 5 6 7 8 10 12 13 14 15 15 15 15 15 15 15 15 15 15 15 15 15 15

PMFR391.001 CA121.010 CA135.004 CA135.001 CA121.011 CA121.012 CA122.010 CA122.017 CA122.018 CA122.016 CA143.010 CA143.021 CA153.160 CA153.162 CA153.165 CA153.168 CA153.170 CA153.172 CA153.175 CA153.178 CA153.180 CA153.185 CA153.190 CA153.195 CA153.200 CA153.201

CONTACT THE NEAREST ITAKASHOP STORE

DELL’ORTO CARBURETTOR VHSB 34 CARBURETTOR SLIDE JET NEEDLE K98 NEEDLE CLIP FOR DELL’ORTO NIPPLE SCREW SPRING VHSB34 CARBURETTOR COVER VHSB34 PIPE KIT VHSB34 ADJUSTMENT SCREW VHSB34 COVER RUBBER VHSB34 NEEDLE JET MAIN JET CUP VHSB34 MAIN JET 160 VHSB34 MAIN JET 162 VHSB34 MAIN JET 165 VHSB34 MAIN JET 168 VHSB34 MAIN JET 170 VHSB34 MAIN JET 172 VHSB34 MAIN JET 175 VHSB34 MAIN JET 178 VHSB34 MAIN JET 180 VHSB34 MAIN JET 185 VHSB34 MAIN JET 190 VHSB34 MAIN JET 195 VHSB34 MAIN JET 200 MAIN JET KIT (E10)

15 15 15 15 15 15 16 16* 17 17* 19 21 22 23* 23 25 26 27 28 29 30 31 32 33 34 38 39 40 41 42 43 44 45 46 47 48 49 50

CA153.182 CA153.188 CA153.192 CA153.198 CA153.202 CA153.205 CA143.012 CA143.011 CA153.060 CA153.030 CA142.100 CA141.003 CA141.100 CA144.001 CA144.002 CA124.001 CA134.015 CA134.014 CA171.012 CA171.011 CA151.107 CA151.207 CA134.011 CA134.013 CA134.012 CA121.020 CA121.021 PMFR392.006 PMFR393.103 PMFR393.002 CA133.004 PMFR393.004 PMFR393.101 PMFR393.005 PMFR394.001 PMFR362.102 CA134.016 CA134.017

SHIPMENTS WITHIN 24H (see the practical guide page 4)

VHSB34 MAIN JET 182 VHSB34 MAIN JET 188 VHSB34 MAIN JET 192 VHSB34 MAIN JET 198 VHSB34 MAIN JET 202 VHSB34 MAIN JET 205 IDLE JET INSERT 60 IDLE JET INSERT 30 VHSB34 JET 60 VHSB34 JET 30 NEEDLE VALVE 150 FLOAT BRACKET FLOAT PIN FLOAT VHSB34 5.2G FLOAT VHSB34 3.6 G FLOAT CHAMBER PLUG SCREW RING PLUG SCREW LOCK WASHER SLOTTED HEAD SCREW COMPRESSION SPRING ADJUSTMENT SCREW FUEL FILTER FUEL FILTER CAP GASKET FUEL FILTER CAP STARTER COUNTERSUNK SCREW GASKET SET FOR THE CARBURETTOR THROTTLE CABLE FIX KIT FUEL PUMP PUMP REPAIR KIT FUEL FILTER TUBE AIR VENT HOSE 180MM CABLE BOWDEN ASSY DD2 RUBBER BUFFER PLUG SCREW FLOAT CHAMBER JOINT

NEED SOME HELP ? +33 (0)2 40 38 26 20

ROTAX ENGINE SPARE PARTS

ROTAX DD2

RADIATOR

N° Reference Designation 1 2 3 4 5 6 7 8 9 10

PMFR402.106 PMFR402.101 PMFR401.102 PMFR402.102 PMFR402.105 B3.P0614 B2.N06 PMFR402.103 B1.B0616 PMFR402.015

RADIATOR DD2 FROM 2011 RADIATOR CAP WATER HOSE 16/650 MM CLAMP 27/9 RUBBER BUFFER 15X15XM6 ZINC FLAT WASHER d6 D14 EP1.2 ZINC NUT M6 NYLSTOP CLAMP 26/M6 ZINC SCREW BHC 6X16 10.9 WINDSHIELD

INTAKE SILENCER

N° Reference Designation 1 2 3

100

PMFR392.101 PMFR392.102 PMFR392.103

INTAKE SILENCER CASE INTAKE SILENCER COVER FILTER ELEMENT

4 5 6 7 8 9

PMFR392.004 PMFR392.007 PMFR392.008 B2.N06 B1.B0616 PMFR392.104

INTAKE SILENCER TUBE CARBURETTOR SOCKET CLAMP 50/70 ZINC NUT M6 NYLSTOP ZINC SCREW BHC 6X16 10.9 O RING 59.52X2.62 NBR70

13 19 20 23 25 26

TOOLS

PMFR421.027 PMFR421.003 OU922.005 PMFR421.029 PMFR421.030 PMFR421.031

TIN WIRE 2MM PULLER FOR THE STARTER GEAR VALVE SPRING’S TOOL WRENCH ADAPTER 11/8 ARBOR PRESS VENTURI JET GAUGE SET

EXHAUST SYSTEM

N° Reference Designation

1 2 3 4 5 6 7 8 9 10 11 12

Q 1 2 3 4 5 6 7 8 10 12 13

PMFR421.002 PMFR421.004 PMFR421.005 PMFR421.006 PMFR421.017 PMFR421.028 PMFR421.018 PMFR421.008 PMFR421.019 PMFR421.010 PMFR421.011 PMFR421.020

FIXATION TOOL FOR CRANKSHAFT INSERTION JIG FOR OILSEAL INSERTION JIG FOR NEEDLE BUSHI INSERTION JIG FOR SLOTTED PIN INSERTION JIG CARBURETOR TEMPLATE FIX TOOL FOR PRIM GEARS INSERTION TOOL OF PISTON PIN TOOL TO BLOCK THE STARTER GEAR TRESTLE SUPPORT ASSY TRESTLE SUPPORT ASSY SPRING HOOK FOR EXHAUST SPRING

LU851.003 PMFR371.005 PMFR371.030 PMFR371.026 B1.C0410 B2.04 PMFR373.101 B3.P0816 B2.N08 PMFR371.031 PMFR373.002 PMFR373.006

SILASTIC 732RTV 100 GR DD2 EXHAUST MUFFLER ISOLATING MAT SILENCER COVER ZINC SCREW CHC 4X10 8.8 NUT M4 RUBBER BUFFER 30X30XM8 ZINC FLAT WASHER d8 D16 EP1.6 ZINC NUT M8 NYLSTOP RETROFIT KIT ISOLATING MAT SPRING 66MM FOR THE EXHAUST SPRING

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

IAME ENGINE SPARE PARTS

PARILLA X30

102

HEAD AND CYLINDER

PISTON

C CRANKCASE AND CRANKSHAFT

N째 Reference Designation

1 2 3 4 5 8 9 11 11 13A 15 16 17

50 51 52A 52A 52A 52A 52A 52A 52A 52A 52A 52A 52A 52A 52A 52A 52A 52A 52A 52A 52A 52A

60A 61 62 63 64 65 66 67 68 69 70 71 72 73 74 74 75 76 77 79 80 81 82A 83A 84

PMIA322.020 PMKO322.001 PMKO322.002 PMIA329.010 PMIA328.030 PMIA328.032 PMIA328.033 PMIA328.034 PMIA328.035 PMIA321.020 PMIA323.020 PMIA328.036 PMIA329.012

CYLINDER HEAD X30 HEAD NUT HEAD WASHER TEMPERATURE GAUGE PLUG PLUG GASKET HEAD GASKET OR TI ROD GASKET OR CYLINDER GASKET D4/10 CYLINDER GASKET D2/10 COMPLETE CYLINDER IRON LINER HEAD GASKET OR WATER FITTING PIPE

PMIA326.021 PMKO327.001 PMIA324.300 PMIA324.301 PMIA324.302 PMIA324.303 PMIA324.304 PMIA324.305 PMIA324.306 PMIA324.307 PMIA324.308 PMIA324.309 PMIA324.310 PMIA324.311 PMIA324.312 PMIA324.313 PMIA324.314 PMIA324.315 PMIA324.316 PMIA324.317 PMIA324.318 PMIA324.319

PISTON PIN CIRCLIP COMPLETE PISTON 54.00G COMPLETE PISTON 54.00R COMPLETE PISTON 54.02G COMPLETE PISTON 54.02R COMPLETE PISTON 54.05G COMPLETE PISTON 54.05R COMPLETE PISTON 54.10G COMPLETE PISTON 54.10R COMPLETE PISTON 54.12G COMPLETE PISTON 54.12R COMPLETE PISTON 54.15G COMPLETE PISTON 54.15R COMPLETE PISTON 54.20G COMPLETE PISTON 54.20R COMPLETE PISTON 54.22G COMPLETE PISTON 54.22R COMPLETE PISTON 54.25G COMPLETE PISTON 54.25R COMPLETE PISTON 54.27G COMPLETE PISTON 54.27R

PMIA311.020 PMIA311.021 PMIA313.010 PMIA311.022 PMIA311.023 PMIA331.021 PMIA331.022 PMIA329.010 PMIA328.030 PMIA367.001 PMIA311.024 PMIA312.010 PMIA311.025 PMIA313.003 PMIA314.010 PMIA314.011 PMIA315.002 PMKO382.001 PMIA326.002 PMIA336.004 PMIA334.002 PMIA331.023 PMIA332.030 PMIA331.020 PMIA311.026

COMPLETE CRANKCASE W/ROLLER CRANKCASE SCREW 6X45 SET OF20 OIL SEAL 25X40X7 FPJ FIXING CAB SCREW 6X12 SET OF20 WASHER M6 / SET OF 20 DRIVE HALF CRANKSHAFT MAGN HALF CRANKSHAFT TEMPERATURE GAUGE PLUG PLUG GASKET IGNITION NUT WASHER M10 / SET OF 20 CYLINDER TIE ROD PRESSURE FITTING PRESSURE FITTING GASKE FFSA/PU STEEL SHIM 0.10MM STEEL SHIM 0.15MM BALL BEARING 6206 IAME SPROCKET KEY SMALL END CAGE FFSA/PUMA SILVER BRONZE WASHER BIG END CAGE CRANKPIN COMPLETE SELECTED CONROD X30 COMPLET CRANKSHAFT CROWNED WASHER D10 / SET OF 20

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

PARILLA X30

BALANCING SHAFT

INLET

N° Reference Designation

120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 141

170 171 172 173 173 174 174 175 176 177 178 179 200 220 221

ORDER ON-LINE ON WWW.ITAKASHOP.COM

PMIA335.001 PMIA331.024 PMIA336.005 PMIA331.025 PMIA331.026 PMIA314.015 PMIA311.027 PMIA313.011 PMIA313.012 PMIA311.028 PMIA313.013 PMIA315.003 PMIA311.030 PMIA313.003 PMIA313.014 PMIA314.012 PMIA311.023 PMIA311.031 PMIA311.029

BALL BEARING 6202 T1XC4 BALANCING SHAFT WASHER M5 (SET OF 20) SCREW FOR BEARING (SET OF 20) BALANCING SHAFT GEAR SEEGER ENGRENAGE COVER SCREW 6X16 SET OF 20 OIL SEAL 22X32X7 DAMPENER OR IGNITION SUPPORT COVER COVER GASKET BALL BEARING 6005 PRESSURE PLUG PRESSURE FITTING GASKE FFSA/PU O RING GEAR SPACER WASHER M6 / SET OF 20 SCREW M6X25 SET OF 20 KIT IGNITION SUPPORT COVER

CONTACT THE NEAREST ITAKASHOP STORE

PMIA354.001 PMIA355.001 PMIA352.001 PMIA352.002 PMIA352.004 PMIA352.005 PMIA352.006 PMIA354.002 PMIA351.001 PMIA354.003 PMIA351.002 PMIA311.031 PMIA391.001 PMIA392.001 PMIA392.002

CRANK/MAMI GASKET REEDS SCREW TOP REEDS CLIP KIT 2 TOP REEDS PETAL0.26/0.28 GLASS FIBER REEDS PETAL REEDS GROUP TOP 05’ GLASS FIBER REEDS GROUP TOP CONVOYER GASKET CONVOYOR D28 CARBURETOR GASKET FIX CARBURATOR STUDBOLT M6X30 SCREW M6X25 SET OF 20 TRYTON CARBURETTOR INTAKE SILENCER FOAM FILTER + SLEEVE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

103

IAME ENGINE SPARE PARTS

PARILLA X30

104

ELECTRONIC IGNITION

CLUTCH

EXHAUST GASKETS SET

N째 Reference Designation

250 260 260 261 270 271 272 273 274 275 276 289 290 291 292 292 292 293 294 295 295 296 297 298 299 300 301 301

350 351 352 353 354 355 355 355 355 356 357 357 357 358 361 361 361 364 365 366 367

400 401 402 402 403 404 405 406 407 420 430 440 450 451

PMIA365.001 PM366.063 PM366.062 PMIA366.001 PMIA367.002 PMIA311.023 PMKO362.002 PMIA362.001 PMIA367.003 PMIA367.004 PMIA361.003 PMIA364.010 PMIA364.003 PMFR364.000 PMIA364.006 PMIA364.007 PMIA364.008 PMIA364.009 PMIA363.010 PMIA362.010 PMIA362.013 PMIA362.014 PMIA363.011 PMIA365.020 PMIA365.022 PMIA367.005 PMIA365.023 PMIA365.024

COIL GROUND CABLE FFSA/PUMA NGK BR9EG SPARK PLUG NGK BR10EG SPARK PLUG PVL RUBBER CAP DEMPENER NUT M6 (SET OF 20) WASHER M6 / SET OF 20 SILENT BLOC FOR COIL SELETTRA SELETTRA COIL SCREW M5X25 (SET OF 20) WASHER M5 (SET OF 20) SELETTRA IGNITION X30 FROM 2013 SUPPORT BATTERY FROM 2013 RUBBER STRIPE FFSA/PUMA BATTERY 12V-9A FIAMM SUPPORT BATTERY D28 FROM 2013 (KIT) SUPPORT BATTERY D30 FROM 2013 (KIT) SUPPORT BATTERY D32 FROM 2013 (KIT) SUPPORT BATTERY COVER FROM 2013 FUSE 5A POWER UNIT X30 TYPE C POWER UNIT X30 TYPE F-JUN RELAY X30 FROM 2013 STARTER KEY ASSEMBLY X30 ELECTRIC STARTER CABLE KIT CABLES WITH CONNECTORS FROM 2013 VELCRO FIXING STRAP ADAPTOR FOR ELECTRICAL BEAM FROM 2013 ADAPTOR FOR STATOR BEAM FROM 2013

PMIA311.031 PMIA381.015 PMIA383.005 PMIA383.001 PMIA382.005 PMIA382.020 PMIA382.021 PMIA382.022 PMIA382.029 PMIA382.023 PMIA382.024 PMIA382.025 PMIA382.026 PMIA383.002 PMIA381.016 PMIA381.017 PMIA381.018 PMIA382.030 PMIA382.031 PMIA311.027 PMIA383.012

SCREW M6X25 SET OF 20 CLUTCH GUARD IAME STARTER NUT EXTERNAL WASHER FFSA/PUMA ROLLER CAGE FFSA/PUMA SPROCKET Z10 SPROCKET Z11 SPROCKET Z12 SPROCKET Z13 DRUM DRUM COMPLET WITH SPOCKET Z10 DRUM COMPLET WITH SPOCKET Z11 DRUM COMPLET WITH SPOCKET Z12 IAME INTERNAL WASHER CLUTCH Z10 FROM 2013 CLUTCH Z11 FROM 2013 CLUTCH Z12 FROM 2013 PADDED HUB FROM 2013 STARTER DRIVE WHEEL FROM 2013 COVER SCREW 6X16 SET OF 20 LOCKING NUT 2013

PMIA373.030 PMIA373.031 PMIA372.020 PMIA372.022 PMIA373.032 PMIA373.001 PM373.102 PMIA373.035 PMIA373.036 PMIA328.037 CA133.015 LU851.002 PMIA371.005 PMIA371.006

EXHAUST NUT M8 EXHAUST WASHER M8 (SET OF 20) EXHAUST PIPE X30 EXHAUST PIPE X30 29mm EXHAUST PIPE GASKET EXHAUST STUDBOLT FFSA/X30 FLEXIBLE OF EXHAUST PROTECTOR SPRING FOR FLEXIBLE FLEXIBLE D45 L250 GASKETS SET X30 KIT FOR CARBURATOR TRYTON RHODORSIL JOINTING COMPOUND SILENCER END EXHAUST SILENCER X30

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

PARILLA X30

ELECTRIC STARTER

WATER COOLING SYSTEM

TOOLS

N째 Reference Designation

500 501 502 503 504 505 506 507 508

550 555 555 555 560 560 570 570 580 580 580 580 580 580 580 580 581 590

600 601 602 603 604 606

PMIA311.031 PMIA363.004 PMIA363.013 PMIA363.003 PMIA363.014 PMIA367.023 PMIA311.023 PMIA311.022 PMFR363.006

SCREW M6X25 SET OF 20 COUNTERSHAFT SUPPORT COUNTERSHAFT ROLLER CAGE STARTER SCREWS M6X25 / SET OF 20 WASHER M6 / SET OF 20 FIXING CAB SCREW 6X12 SET OF20 REPAIRING SET ELECTRIC STARTER

ORDER ON-LINE ON WWW.ITAKASHOP.COM

PMIA401.001 PMIA401.002 PMIA401.003 PMIA401.004 PMIA401.005 PMIA401.006 PMIA401.007 PMIA401.008 PMIA402.001 PMIA402.002 PMIA402.003 PMIA402.004 PMIA402.011 PMIA402.012 PMIA402.013 PMIA402.014 PMIA402.015 PMIA402.020

CONTACT THE NEAREST ITAKASHOP STORE

COMPLETE WATER PIPE KIT BRACKET AND CLAMP KIT D28 BRACKET AND CLAMP KIT D30 BRACKET AND CLAMP KIT D32 RADIATOR SUPPORT KIT 350 RADIATOR SUPPORT KIT 410 RADIATOR 350 MM RADIATOR 410 MM X30 WATER PUMP COMPLETE 30/30 WATER PUMP COMPLETE 30/35 WATER PUMP COMPLETE 30/40 WATER PUMP COMPLETE 30/50 WATER PUMP COMPLETE 32/30 WATER PUMP COMPLETE 32/35 WATER PUMP COMPLETE 32/40 WATER PUMP COMPLETE 32/50 WATER PUMP THERMOSTAT COMPLETE 50째 IAME

PMFR421.002 PMIA421.011 PMIA421.013 OU914.007 OU921.012 PMIA421.012

SHIPMENTS WITHIN 24H (see the practical guide page 4)

FIXATION TOOL FOR CRANKSHAFT CLUTCH PULLER PISTON PIN PUNCH CLUTCH LOCK WRENCH EARLESS CIRCLIPS FITTING TOOL WRENCH FOR CLUTCH PULLER 12mm

NEED SOME HELP ? +33 (0)2 40 38 26 20

105

TM ENGINE SPARE PARTS TM KZ10 TM KZ10-B TMKZ10-ES

HEAD AND CYLINDER

N° Reference Designation 1a 1b 2a 2b 3 4a 4b 5 6 7a 7b 7c 8 9a 9a 9a 9a 9a 9a 9b 9b 9b 9b 9b 9b 9b 10 10b 10b

106

PMTM366.001 PMTM366.002 PM366.001 PM366.062 PMTM329.001 PMTM322.003 PMTM322.006 PMTM328.001 PMTM328.006 PMTM321.004 PMTM321.007 PMTM321.008 PMTM402.005 PMTM328.020 PMTM328.021 PMTM328.022 PMTM328.023 PMTM328.024 PMTM328.025 PMTM328.030 PMTM328.031 PMTM328.032 PMTM328.033 PMTM328.034 PMTM328.035 PMTM328.036 PMTM373.003 PMTM373.005 PMTM373.006

CAP SPARK PLUG KZ10-KZ10B CAP SPARK PLUG KZ10 ES BOSCH W07CS SPARK PLUG NGK BR10EG SPARK PLUG SCREW 6X30 HEAD KZ10/B/ES HEAD 4° KZ10B USINE O-RING O-RING KZ10 KZ10 CYLINDER KZ10 ES CYLINDER KZ10-B CYLINDER PLUG CYLINDER GASKET 0.05 K9C-KZ10 GASKET 0.1 K9C-KZ10 GASKET 0.2 K9C-KZ10 GASKET 0.3 K9C-KZ10 GASKET 0.4 K9C-KZ10 GASKET 0.5 K9C-KZ10 GASKET 0.05 KZ10-B GASKET 0.10 KZ10-B GASKET 0.15 KZ10-B GASKET 0.20KZ10-B GASKET 0.30KZ10-B GASKET 0.40KZ10-B GASKET 0.50KZ10-B GASKET KZ10-KZ10B GASKET KZ10B 5 MM GASKET KZ10B 3 MM

12b 13 14 15 41 42a 42b 42c

PMTM411.021 PMTM402.001 PMTM402.002 PMTM402.003 PMTM322.004 PMTM322.005 PMTM322.007 PMTM322.008

SCREW 6X20 WATER JOINT BAND Ø16/28 WATER HOSE HEAD COVER KZ10/B/ES KZ10 COMBUSTION CHAMBERS KZ10B/ES COMBUSTION CHAMBER 11 KZ10BFAC COMBUSTION CHAMBER 4°

PISTON AND CRANKSHAFT

N° Reference Designation 1 2a 2a 2a 2a 2a 2a 2b 2b 2b 2b 2b 2b 3 4 5 6a 6a 6a 6a

PMTM325.001 PMTM324.003 PMTM324.004 PMTM324.005 PMTM324.006 PMTM324.007 PMTM324.008 PMTM324.023 PMTM324.024 PMTM324.025 PMTM324.026 PMTM324.027 PMTM324.028 PMTM326.002 PMTM327.001 PMTM326.001 PMTM332.002 PMTM332.001 PMTM332.004 PMTM332.006

RING D54 PISTON ASSY 53.93 PISTON ASSY 53.94 PISTON ASSY 53.95 PISTON ASSY 53.96 PISTON ASSY 53.97 PISTON ASSY 53.98 PISTON ASSY 53.93 4° PISTON ASSY 53.94 4° PISTON ASSY 53.95 4° PISTON ASSY 53.96 4° PISTON ASSY 53.97 4° PISTON ASSY 53.98 4° PISTON PIN CIRCLIP NEEDLE CAGE CON ROD KIT (PIN d6) CON ROD KIT (PIN d8) CON ROD KIT (SOLID) CON ROD KIT (d6)

6a 6a 6b 6c 7a 7a 7b 8a 8a 8a 8b 9a 9b 10a 10b 11a 11b 11c 12a 12b 12c 13 14a 14b 15 16 17 18a 18b 19

PMTM332.007 PMTM332.008 PMTM332.010 PMTM332.011 PMTM332.003 PMTM332.005 PMTM332.012 PMTM333.001 PMTM333.002 PMTM333.003 PMTM333.005 PMTM334.001 PMTM334.003 PMTM336.001 PMTM336.002 PMTM331.002 PMTM331.006 PMTM331.007 PMTM331.001 PMTM331.008 PMTM331.009 PMTM313.001 PMTM381.001 PMTM381.002 PMTM412.001 PMTM412.002 PMTM412.007 PMTM315.002 PMTM315.007 PMTM315.008

CON ROD KIT (d8) CON ROD KIT (SOLID) CON ROD KIT D22 (d6) CON ROD KIT D22 CONNECTING ROD D20 CONNECTING ROD D20 CONNECTING ROD D22 CRANK PIN D20X50.4 (Ø6) CRANK PIN D20X50.4 (Ø8) CRANK PIN D20X50.4 (SOLID) CRANK PIN D22X50.4 (Ø6) END BEARING D20 END BEARING D22 THRUST WASHER D20 THRUST WASHER D22 K9B-KZ10ES CRANKSHAFT ASSY D20 (3 HOLES) CRANKSHAFT ASSY Ø20 KZ10B CRANKSHAFT ASSY Ø22 KZ10B ALF CRANKSHAFT ALF CRANKSHAFT KZ10 ES ALF CRANKSHAFT KZ10B OIL SEAL 20X35X7 GEAR PRIMARY DRIVE Z19 GEAR PRIMARY DRIVE Z19 SNAP RING IGNITION NUT CRANKSHAFT KEY BEARING 6205 C4 BEARING 6228 BEARING

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

TM KZ10 TM KZ10-B TMKZ10-ES

CLUTCH

N째 Reference Designation 1 2a 2b 3 4 5 6 7 8 9 10a 10b 11a 11b 12 13 14a 14b 15 16 17a 17b 18 19 20a 20b 21 22 23 24

PMTM383.001 PMTM382.004 PMTM382.030 PMTM412.006 PMTM383.003 PMTM413.001 PMTM383.010 PMTM383.004 PMTM382.002 PMTM382.001 PMTM382.024 PMTM382.031 PMTM382.003 PMTM382.032 PMTM411.019 PMTM383.006 PMTM383.030 PMTM382.033 PMTM383.011 PMTM383.007 PMTM382.025 PMTM382.034 PMTM383.008 PMTM383.013 PMTM382.026 PMTM382.035 PMTM412.003 PMTM413.002 PMTM411.020 PMTM411.007

CIRCLIP PLATE CLUTCH PRESSURE KZ10 PLATE CLUTCH PRESSURE KZ10B NUT CLUTCH SPRING SPRING WASHER NEEDLE CAGE PIN DISK CLUTCH FRICTION PLATE CLUTCH CLUTCH CENTER KZ10 CLUTCH CENTER KZ10B PLATE KZ10 PLATE KZ10B SCREW OIL SEAL 20X26X4 CLUTCH BASKET KZ10 CLUTCH BASKET KZ10B NEEDLE CAGE HK2012 RUBBER SLEEVE FLY WEIGHT KZ10 FLY WEIGHT KZ10B O-RING BUSHING FLY WEIGHT COMPLET KZ10 FLY WEIGHT FULL KZ10B NUT M6 WASHER D6 GRUB SCREW 6X30 SCREW 6X10

ORDER ON-LINE ON WWW.ITAKASHOP.COM

25 26 27a 27b 27c 28 29 30 31a 31b 32 33 34 35

PMTM413.003 PMTM383.014 PMTM382.027 PMTM382.036 PMTM382.038 PMTM383.015 PMTM382.010 PMTM383.016 PMTM383.017 PMTM382.037 PMTM383.018 PMTM383.019 PMTM383.031 PMTM383.009

WASHER D6X12 RUBBER MOUNT COVER CLUTCH KZ10 COVER CLUTCH KZ10B COVER CLUTCH KZ10 ES RUBBER MOUNT PRIMARY GEAR Z75 SNAP RING CLUTCH ROD KZ10 CLUTCH ROD KZ10B CLUTCH PIN CLUTCH ROD GASKET CLUTCH COVER KZ10 OIL SEAL 40X52X7

REDDS BOX

N째 Reference Designation A A1 A2 A3 A4 1 2 3 4 5 6 7 7 8 9

PMTM352.001 PMTM352.003 PMTM352.004 PMTM352.006 PMTM352.007 PMTM321.012 PMTM321.013 PMTM411.018 PMTM329.001 PMTM351.006 PMTM354.002 PMTM351.004 PMTM351.005 PMTM354.001 PMTM411.001

CONTACT THE NEAREST ITAKASHOP STORE

REED PETAL REED TOP REED BOTTOM METAL STOPPERS K9C/KZ10 STOPPER REED TOP INTAKE PIPE KZ10 PLATE - INTAKE PIPE KZ10 SCREW 8X12 SCREW 6X30 MAINFOLD KZ10 GASKET REED BOX COMPLET K9C/KZ10 REED BOX GASKET SCREW

CRANKCASE

N째 Reference Designation 1a 1b 1c 2 3 4a 4b 4c 5 6 7 8 9 10 11 12

PMTM311.003 PMTM311.005 PMTM311.006 PMTM312.002 PMTM312.003 PMTM315.002 PMTM315.008 PMTM315.007 PMTM313.001 PMTM315.003 B9.6001-2RS PMTM315.004 PMTM315.005 PMTM315.006 PMTM313.002 PMTM313.003

SHIPMENTS WITHIN 24H (see the practical guide page 4)

CRANKCASE KZ10 CRANKCASE KZ10-B CRANKCASE KZ10-ES DOWEL 6X12 DOWEL 8X12 BEARING 6205 C4 BEARING BEARING 6228 OIL SEAL 20X35X7 BEARING 6202 ZC3 BEARING 6001-2RS BEARING 6204 C3 BEARING 6205 C3 NEEDLE CAGE DHK 35/12 OIL SEAL 26X37X7 OIL SEAL 12X22X5

NEED SOME HELP ? +33 (0)2 40 38 26 20

107

TM ENGINE SPARE PARTS TM KZ10 TM KZ10-B TMKZ10-ES

IGNITION

108

GEAR BOX - CLUTCH DRIVE

EXHAUST - ENGINE MOUNT

N° Reference Designation

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

1 2a 2b 3 4 5 6 7 8 9 10 11 12 13 14 15 16a 16b 17 18 19

1a 1b 2a 2b 3 4 5 6a 6b 7 8 9 10 11 12

PMTM362.001 PMTM361.001 PMTM411.008 PMTM411.009 PMTM413.004 PMTM361.003 PMTM361.004 PMTM362.002 PMTM393.001 PMTM366.002 PMTM361.005 PMTM362.003 PMTM365.001 PMTM365.002 PMIA363.010 PMTM365.003 PMTM365.004 PMTM363.001 PMTM363.002 PMTM363.003 PMTM363.004 PMTM363.005

PVL IGNITION COIL PVL IGNITION SCREW 5X40 SCREW 5X30 WASHER IGNITION KZ10 ES CDI KZ10 ES IGNITION COIL KZ10 ES FUEL PUMP CAP SPARK PLUG KZ10 ES IGNITION BRACKETKZ10 ES EARTHING CONNECTION WIRING FUSE HOLDER FUSE 5A BUTTON - SWITCH HOLDER-SWITCH BUTTON STRATER MOTOR BANDIX SPACER 16x8.1x0.5 NEEDLE CAGE SPACER 16x8.1x1

PMTM313.001 PMTM329.002 PMTM329.004 PMTM329.005 PMTM329.003 PMTM383.021 PMTM383.022 PMTM316.005 PMTM316.004 PMTM316.003 PMTM316.036 PMTM413.003 PMTM412.003 PMTM313.003 B9.6001-2RS PMTM316.001 PMTM411.021 PMTM411.015 PMTM313.002 PMTM402.004 PMTM402.005

OIL SEAL 20X35X7 STUD KZ10 STUD KZ10-B SPACER FOR STUD KZ10-B NUT CLUTCH CONTROL LEVER NEEDLE CAGE DHK14/14RS SPACER SPRING PIN SHAFT GEARSHIFT KZ10 WASHER D6X12 NUT M6 OIL SEAL 12X22X5 BEARING 6001-2RS BRACKET SCREW 6X20 SCREW 6X25 OIL SEAL 26X37X7 WATER HOSE PLUG CYLINDER

PMTM371.012 PMTM371.013 PMTM371.010 PMTM371.011 PMTM372.001 PMTM372.002 PMTM372.006 PMTM316.013 PMTM316.015 PMTM316.012 PMTM411.013 PMTM411.014 PMTM372.005 PM373.010 PMTM373.004

EXHAUST SILENCER KZ10 EXHAUST SILENCER KZ10-ES-B EXHAUST MUFFLER KZ10-KZ10ES EXHAUST MUFFLER KZ10-B TUBE D28/28 TUBE D26/28 BUSHING Ø 26/28 ENGINE MOUNT KZ10/B ENGINE MOUNT KZ10-ES HOLDING FLANGE SCREW 10X40 SCREW 8X25 WATER HOSE EXHAUST HOLDER SPRING FOR 125 EXHAUST SPRING

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

110

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

PERIPHERICAL ENGINE PARTS 112 Radiators and cooling accessories 114 Air boxes 116 Spark plugs and accessories 118 Batteries and accessories 120 Carburettors 122 Exhausts 124 Engine brackets and engine mounts flange

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

111

TM KZ10 TM KZ10-B TMKZ10-ES I

GEAR SHIFF

GEAR BOX

N° Reference Designation

N° Reference Désignation

1a 1b 2 3 4 5 6 7 8 9 10a 10b 11 12 13a 13b 14 15 16 17 18 19 20 21 22 23 24 25

1 2 3 4 5 6 7 8 9 10 11 12 13a 13a 13a 13a 13b 13b 13b 13b 13c 13c 13c 14 15 16 17 18

19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40

PMTM316.020 PMTM316.037 PMTM316.021 PMTM316.022 PMTM316.023 PMTM316.024 PMTM316.025 PMTM411.015 PMTM316.026 PMTM314.001 PMTM316.027 PMTM316.038 PMTM313.004 PMTM313.005 PMTM313.007 PMTM313.009 PMTM316.028 PMTM316.029 PMTM316.030 PMTM411.016 PMTM316.031 PMTM316.032 PMTM316.033 PMTM316.034 PMTM316.035 PMTM411.017 PMTM312.001 PMTM313.008

DRUM KZ10-ES DRUM KZ10-B FORK COUNTERSHAFT FORK COUNTERSHAFT SHAFT COUNTERSHAFT FORK FORK MAINSHAFT SHAFT MAINSHAFT FORK SCREW 6X25 SPRING SPACER SPRING STOPPER COMP. KZ10-ES STOPPER COMP. KZ10-B OIL PLUG WASHER OIL PLUG OIL PLUG WITH MAGNET OIL PLUG WITH MAGNET BREATHER PLATE RATCHET PLATE SCREW 6X20 SHIFFER GEAR SPRING PLUNGER UPPER RATCHET LOWER RATCHET SCREW 6X16 DOWEL WASHER OIL PLUG

ORDER ON-LINE ON WWW.ITAKASHOP.COM

PMTM412.004 PMTM383.023 PMTM383.024 PMTM383.025 PMTM382.011 PMTM383.026 PMTM382.012 PMTM413.005 PMTM412.001 PMTM382.013 PMTM382.014 PMTM382.015 TR251.015 TR251.016 TR251.017 TR251.018 TR251.115 TR251.116 TR251.117 TR251.118 TR251.019 TR251.020 TR251.021 PMTM313.002 PMTM383.027 PMTM383.028 PMTM413.009 PMTM383.032

CONTACT THE NEAREST ITAKASHOP STORE

NUT SPACER OIL SEAL 5X9X2 SPACER 30X20X2 MAINSHAFT 13T NEEDLE CAGE 20X24X10 GEAR 5TH MAINSHAFT 22T WASHER 27X20X0.7 SNAP RING GEAR 3/4TH MAINSHAFT 18/22T GEAR 6TH MAINSHAFT 27T GEAR 2TH MAINSHAFT 16T FINAL DRIVE SPROC 15 T FINAL DRIVE SPROC 16 T FINAL DRIVE SPROC 17 T FINAL DRIVE SPROC 18 T FINAL DRIVE SPROC 15 T FINAL DRIVE SPROC 16 T FINAL DRIVE SPROC 17 T FINAL DRIVE SPROC 18 T FINAL DRIVE SPROC 19 T FINAL DRIVE SPROC 20 T FINAL DRIVE SPROC 21 T OIL SEAL 26X37X7 COLLAR O-RING WASHER 30X20X2 NEEDLE CAGE

PMTM382.016 PMTM382.039 PMTM413.010 PMTM382.017 PMTM382.040 PMTM382.018 PMTM382.041 PMTM412.005 PMTM412.008 PMTM413.006 PMTM413.011 PMTM383.033 PMTM382.019 PMTM382.042 PMTM382.020 PMTM382.043 PMTM382.021 PMTM382.044 PMTM413.007 PMTM382.022 PMTM383.029 PMTM413.008

SHIPMENTS WITHIN 24H (see the practical guide page 4)

GEAR 2TH COUNTERSHAFT 29T GEAR 2TH COUNTERSHAFT 29T WASHER 30X21X0.5 COUNTERSHAFT COUNTERSHAFT KZ10-B GEAR 6TH COUNTERSHAFT 25T GEAR 6TH COUNTERSHAFT 25T SNAP RING D22 SNAP RING WASHER 27X22X0.75 WASHER NEEDLE CAGE GEAR 4TH COUNTERSHAFT 27T GEAR 4TH COUNTERSHAFT 27T GEAR 3TH COUNTERSHAFT 27T GEAR 3TH COUNTERSHAFT 27T GEAR 5TH COUNTERSHAFT 23T GEAR 5TH COUNTERSHAFT 23T WASHER 26X17X0.5 GEAR 1TH COUNTERSHAFT 33T NEEDLE CAGE 17X21X10 WASHER 28X15X0.5

NEED SOME HELP ? +33 (0)2 40 38 26 20

109

RADIATORS AND COOLING ACCESSORIES A

J H

K D

The reference in the field of aluminium radiators. Large H: 430 mm - L: 200 mm - Thickness: 45 mm - Weight: 2,2 kg XLarge H: 430 mm - L: 240 mm - Thickness: 45 mm - Weight: 2,6 kg

COMPLETE NEW-LINE RADIATOR

REF: PMFR402.016

G REF: PM402.006 REF: PM402.007

MAX RACING / J125 MAX / MINIMAX RM RADIATOR BRACKET

REF: PMFR402.014

FIXATION KIT FOR NEW-LINE RADIATOR

REF: PM402.00M

MICROMAX RADIATOR RM

REF: PMFR402.023

NEW LINE Large REF: PM402.008 NEW LINE XLarge REF: PM402.009

MAX RACING / J125 MAX / MINIMAX RADIATOR RM

NEW-LINE SHUTTER BLIND FOR RADIATOR

MICROMAX RADIATOR BRACKET RM

REF: PMFR402.024

REF: PM402.01M

DD2 RADIATOR RM

NEW LINE Large REF: PM402.011 REF: PMFR402.106 NEW LINE XLarge REF: PM402.013

NEW-LINE RADIATOR CAP

ROTAX MAX RADIATOR CAP RM

REF: PMFR402.101

REF: PM402.010 For Rotax Max 112

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

R Q S

OVERFLOW BOTTLE

REF: PC0531.010 This plastic bottle comes with a hose clip to fasten it to kart frame or radiator bracket: it collects any liquid or vapor that may leak.

WATER SYPHON KIT

REF: PC0541.008 Water syphon kit for Rotax Max engine. Delivered with a hose, a "Y" piece and a bracket.

WATER PUMP BRACKET

REF: PC0561.03M

PLASTIC WATER PUMP

PULLEY FOR PLASTIC WATER PUMP

REF: PM401.016 For 50 mm diameter shaft. Outside diameter 75 mm.

ORDER ON-LINE ON WWW.ITAKASHOP.COM

REF: PM401.001

PULLEY FOR ALUMINIUM WATER PUMP

REF: PM401.015 Made from machined aluminium. For 50 mm diameter shaft. Outside diameter 90 mm.

WATER PUMP BELT

REF: PM401.021

WATER HOSE 70CM

FASTENING COLLAR FOR WATER HOSE

REF: PM401.023 For 16 to 25 mm diameter hoses.

REF: PM401.003 The strongest on the market.

ALUMINIUM WATER PUMP

REF: PM401.022

Diameters 30 or 32 mm

CONTACT THE NEAREST ITAKASHOP STORE

WATER HOSE SLEEVE

REF: PM401.024 Outside diameter: 16 mm.

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

113

AIR BOXES

D F

A E G

B J

NOX AIR BOX

REF: PM392.007M This air box is very used in competition. CIK/FIA approved. Delivered complete with trumpets and sleeve. Built-in filter. Available with 23 mm or 30 mm diameter trumpets

NOX AIR BOX HOLDER KIT

REF: PC0551.110 System of fastening made to measure of your NOX air box to the chassis. Delivered as a kit (without the air box).

NOX AIR-BOX FILTER

UNIVERSAL AIR BOX

REF: PM392.004 Ideal for reed-valve engine or piston skirt. Delivered complete with trumpets, grills, sleeve and serflex clamp.

AIR BOX SLEEVE

REF: PM392.061

ELASTIC SECURING STRAP FOR AIR BOX

REF: PC0551.108 Elastic securing strap for air box. 5,2 mm thick.

REF: PM392.077

FREELINE AIR BOX

SERFLEX AIR BOX CLAMP

REF: PM392.093 Serflex air box clamp for all kinds of air boxes.

REF: PM392.015M The top can be dismantled in order to direct the trumpets towards the front or the rear. Delivered complete with trumpets, sleeve and serflex clamp. Built-in filter.

REF: PM392.071

Available with 23 mm or 30 mm diameter trumpets

Outside diameter: 62mm. Inside diameter: 32mm

AIR BOX PLASTIC ADAPTOR

FREELINE AIR BOX HOLDER KIT

REF: PC0551.105 System of fastening made to measure of your Freeline air box to the chassis. Delivered as a kit (without the air box).

114

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

SPARK PLUGS AND ACCESSORIES B

NGK RACING B/EG SPARK PLUG

REF: PM366.06M Competition/leisure spark plug. Use: B9EG, for wet and cold weather. B10EG, for moderate weather. B11EG, for hot weather.

NGK RACING B/EGV SPARK PLUG

REF: PM366.05M Spark plug with precious metal electrode for improved efficiency and faster acceleration. Use: B9EGV, for cold weather. B10EGV, for moderate weather.

NGK RACING BR10 EIX SPARK PLUG

REF: PM366.067 Racing/leisure spark plug. Ideal for KF, KZ, X30, Puma engines. Iridium electrode. Use: for moderate weather.

NGK RACING 6254E-105 SPARK PLUG

REF: PM366.058 Spark plug with precious metal internal electrode for Racing engines. Use: for hot and moderate weather.

NGK RACING BR/EG SPARK PLUG

REF: PM366.062M Competition/leisure resistor spark plug. Use: BR9EG, for cold weather. BR10EG, for moderate weather.

116

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

F G

NGK RACING R7282 SPARK PLUG

REF: PM366.065M Spark plug specially adapted for KZ 125cc engines. Very short, long base (19 mm), platinum electrode, this spark plug of very high technology is developed for engines with high performance. Required TRS 1225 spark plug cap (reference PM366.104). SPARK PLUG R7282-105 SPARK PLUG R7282-11

Heat range 10,5 Heat range 11

REF: PM366.066 REF: PM366.065

NGK TRS 1225 SPARK PLUG CAP

REF: PM366.104 Spark plug cap for NGK Racing R7282-105 and R7282-11 spark plugs.

NGK LB 05EMH SPARK PLUG CAP

REF: PM366.102

ORDER ON-LINE ON WWW.ITAKASHOP.COM

SILICONE SPARK PLUG CAP

REF: PM366.103

NGK BPR-6ES SPARK PLUG RENTAL PRODUCT

REF: PM366.056 For GX HONDA 4-stroke engines.

TM RACING 8 SPARK PLUG

REF: PM366.074 TM Racing 8 spark plug delivered as standard with TM engines.

DENSO SPARK PLUG

REF: PM366.01M Spark plug delivered as standard with ROTAX MAX engines. ROTAX challenge approved. Use: IW24, for cold weather. IW27, for cold and moderate weather. IW29, for moderate weather. IW31, for hot weather. IW34, for very hot weather.

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

117

BATTERIES AND ACCESSORIES

YT7B-BS YUASA BATTERY

ROTAX LITHIUM BATTERY

REF: PMFR364.018 YT7B-BS YUASA lead-ion battery 12V 7.0A. Long life. Approved for use in Rotax Max engines.

REF: PMFR364.027 Lithium battery 12V 2.3Ah much lighter than the original lead-ion battery (about 2 kg lighter). Same size as the original battery. Charges faster than a conventional battery (charger to use: reference PMFR364.028). Approved Max EVO/Max Master and DD2/DD2 Master class.

Weight: 2,6 Kg

Weight: 590 g

ROTAX BATTERY CHARGER

REF: PMFR364.002 Standard ROTAX part. Used to connect directly to the electrical harness for recharging the battery without having to dismantle it. 12 V. For lead-ion battery.

ROTAX OPTIMATE LITHIUM BATTERY CHARGER

REF: PMFR364.028 OptiMate lithium battery charger, the first OptiMate to protect your lithium battery in a way no other charger did before! With 5 Amps of charge current available OptiMate lithium unique multi step Ampmatic program recharges and balances cells within the battery quickly and efficiently. SafeTยบ precise charge control. Ampmatic program adjusts to size of battery. Optimizes battery power and life. Test before and after charging. Low voltage battery save mode. Included accessories: Fused eyelet set, weather protected. Clamps set for bench charging. This charger is specifically designed for lithium batteries. Dimensions: 199 x 71 x 61 mm

118

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

FGH FIAMM BATTERY

REF: PMFR364.000 FIAMM lead-ion battery from FGH serie. 12V 9.0A. Not allowed in Rotax "Coupe de Marque". Weight: 2,6 Kg

FGHL FIAMM BATTERY

ACCUGUARD BATTERY CHARGER

REF: PM364.051 AUTOMATIC, SAFE and SIMPLE TO USE. Recharges deep-discharged batteries normal chargers can’t (may be possible even from >3V). 100% safe for long term connection to maintain battery without damage. Reverts automatically from maintenance mode to full charge current if necessary. Electronically protected: no fuses, no sparks. For Ni-Cad, lead-ion and NIMH battery.

REF: PMFR364.017 FIAMM lead-ion battery from FGHL serie. 12V 7.2A. Long life. Not allowed in Rotax "Coupe de Marque". Weight: 2,6 Kg

BATTERY CONNECTOR

REF: PMFR364.019 Useful to connect other equipments on your battery (as data acquisition, transponder, chronometer, etc…). Sold individually.

ORDER ON-LINE ON WWW.ITAKASHOP.COM

IGNITION TERMINAL LUGS

REF: PM367.00M 2 differents models: small and large models.

CONTACT THE NEAREST ITAKASHOP STORE

BATTERY HOLDER KIT

REF: PM364.010 Specially designed to receive the electrics components of KF engines.

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

119

CARBURETTORS B

D E

For all spare parts and all other carburettors, confer engine spare parts (page 88).

F H

DELL'ORTO VHSB 34 CARBURETTOR

REF: PMFR391.001 Rotax Max engine carburettor.

GAS PUMP STAND AND GAS SYPHON KIT

REF: PC0531.009 Gas pump stand and syphon kit for TM KZ engine.

TILLOTSON REPAIR KIT

REF: CA133.00M Set including 4 gaskets, 2 diaphragms, 1 needle valve, 1 needle seat, 1 level, for TILLOTSON carburettors. Available for RK1-HW10 and RK-117-HL carburettors.

GASKETS KIT FOR TILLOTSON CARBURETTORS

REF: CA133.002M Set including 2 gaskets and 2 diaphragms for TILLOTSON carburettors. Available for RK1-HW10 and RK-117-HL carburettors.

IBEA REPAIR KIT

REF: CA133.010 Set including 3 gaskets, 2 diaphragms, 1 filter, 1 needle valve, 1 needle seat, 1 level and its spring. For L2, L5, L6, L7, L8, L9 carburettors. 120

IBEA DIAPHRAGM KIT

REF: CA133.009 Set including 2 gaskets and 2 diaphragms. For L2, L5, L6, L7, L8, L9 carburettors.

CARBURETTOR RETURN SPRING

REF: CA171.303 Unlike springs working under tension, this model works under compression, making it extremely reliable. Easy installation. Works with most shutter carburetors.

ACCELERATOR PROTECTIVE SLEEVE

REF: PC0711.132 Outside diameter: 4,7 mm - Inside diameter: 2,5 mm ď&#x201A;&#x; Sold by meter

ROTAX & KF ACCELERATOR PROTECTIVE SLEEVE

REF: PC0711.162 This 1.8m length of Teflon tube minimises friction.

ACCELERATOR PROTECTIVE SLEEVE PROTECTION

REF: PC0711.046 Holds of protective sleeve and protects humidity.

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

T Q

STEEL ACCELERATOR CABLE

REF: PC0711.031 Cable: Length: 2500 mm  Diameter: 1,2 mm Cylindrical pivot pin: Length: 3,5 mm  Diameter: 3 mm

STAINLESS STEEL ACCELERATOR CABLE

REF: PC0711.040 Cable: Length: 2000 mm  Diameter: 1,8 mm Cylindrical pivot pin: Length: 7 mm  Diameter: 7 mm

STAINLESS STEEL ACCELERATOR CABLE

REF: PC0711.088 Cable: Length: 1800 mm  Diameter: 1,3 mm Banjo type - pivot pin: Length: 3 mm  Diameter: 3 mm

STAINLESS STEEL CLUTCH CABLE

MIKUNI ROUND FUEL PUMP

REF: PM393.002 Flows 20 litres per hour.

MIKUNI ROUND HIGH-FLOW FUEL PUMP

REF: PM393.001 For KZ. Flows 35 litres per hour.

GASKETS KIT FOR MIKUNI ROUND PUMP

REF: CA133.005M 2 models: Round and Round high-flow

GASKETS KIT FOR MIKUNI RECTANGULAR PUMP

REF: CA133.004

MIKUNI RECTANGULAR FUEL PUMP

REF: PM393.003 Flows 14 litres per hour.

REF: PC0711.084 Cable: Length: 2000 mm  Diameter: 2 mm Hexagon pivot pin: Length: 10,7 mm

MIKUNI PLASTIC ROUND FUEL PUMP

REF: PM393.008 Flows 25 litres per hour.

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

121

EXHAUSTS

ELTO RACING, Thanks to its extensive experience in silencer production for karting managed to link noise reduction with best performance for KZ engines. This favoured choice of factory and established racing teams.

APPROVED

CIK-FIA 3/EX-SI/22 APPROVED

APPROVED

CIK-FIA 4/EX-SI/22

CIK-FIA 5/EX-SI/22

APPROVED

ELTO OVS EXHAUST SILENCER

D C

APPROVED

ELTO TD EXHAUST SILENCER

REF: PM371.301 Elto OVS oval silencer, simple interior absorption channel.

REF: PM371.303 Elto TD round silencer, simple interior absorption channel.

Weight: 2,50 Kg

Weight: 2,30 Kg

ELTO OVD EXHAUST SILENCER

ELTO EXHAUST SILENCER RECHARGE

REF: PM371.302 Elto OVD oval silencer, double interior absorption channel.

REF: PM371.305 2 parts.

Weight: 2,70 Kg

Dimensions: Part 1: 100x46 cm - Part 2: 30x46 cm

D RACING: Designed for all KZ engines and rigourously laboratory tested to limit noise emission to 96db, these silencers comply with FFSA standards and are characterized by a specific punching tool, high density insulation and machined rings to maintain high engine performance.

APPROVED

CIK-FIA 1/EX-SI/22

APPROVED

CIK-FIA 2/EX-SI/22 APPROVED

D RACING EXHAUST SILENCER BRACKET

REF: PM371.402 D Racing Sarno silencer, aluminium tube.

REF: PM371.40M Lightweight and resistant, ideal to set your silencer.

Weight: 2,20 Kg

2 models: D Racing Varennes - D Racing Sarno

122

D RACING SARNO EXHAUST SILENCER

D RACING VARENNES EXHAUST SILENCER

D RACING EXHAUST SILENCER RECHARGE

REF: PM371.405

SPRING FOR D RACING EXHAUST SILENCER

REF: PM371.401 D Racing Varennes oval silencer, titanium tube.

REF: PM371.407 Steel biconical spring with anti-vibration protection. Sold individually.

Weight: 2,10 Kg

Free length: 58 mm  Ø wire hook: 2,5 mm - Ø wire coil: 1,7 mm - Ø outside: 10 mm PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

X30 AND PUMA EXHAUST SILENCER

REF: PMIA371.007 IAME exhaust silencer approved for X30 and Puma engines. Includes exhaust silencer, exhaust header, and exhaust bracket. Easy-fitting. Mandatory in racing.

KFS100 AND KFS125 EXHAUST SILENCER

REF: PMIA371.008 IAME exhaust silencer approved for engines in KFS100 and KFS125 class. Includes exhaust silencer, exhaust header, and exhaust bracket. Easy-fitting. Mandatory in racing.

P Q

EXHAUST INSULATING HOSE

REF: PM373.102 105 mm wide

EXHAUST BRACKET

REF: PC0662.023

SILENCER RECHARGE

REF: PM373.101 Dimensions: 40 cm x 60 cm

EXHAUST INSULATION

KZ SILENCER BRACKET

MICRO MAX EXHAUST BRACKET KIT

REF: PC0662.046 Complete kit to set Rotax Micro Max exhaust on a MiniKart chassis.

RETROFIT KIT ISOLATING MAT

REF: PMFR371.031 Increases lifetime of exhaust insulation. Mandatory on MicroMax engines in Minikart class. ORDER ON-LINE ON WWW.ITAKASHOP.COM

REF: PC0662.028 Designed to bracket the exhaust silencer of KZ engines. Delivered with bracket. (without springs).

REF: PMFR371.030 For Rotax Max exhausts.

CONTACT THE NEAREST ITAKASHOP STORE

EXHAUST SILENCER BRACKET

REF: PC0662.006 Delivered with springs and securing accessories.

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

123

EXHAUSTS / ENGINE BRACKETS AND ENGINE MOUNTS FLANGE Drawing of springs: legends Ø outside

Exhaust silencers: Confer engine spare parts (page 88) CIK approved exhaust silencer: All parts on our website www.ITAKAshop.com

ALL ROTAX MAX ENGINES SE · USE · U

EXHAUST HOLDER SPRING

EXHAUST SPRING

REF: PM373.001 Free length: 50 mm  Wire diameter: 1,5 mm Outside diameter: 12 mm  Sold individually

EXHAUST SPRING

REF: PM373.017 Equipped with anti-vibration protection. Free length: 70 mm  Wire diameter: 2 mm Outside diameter: 10,70 mm  Sold as a pair

REF: PM373.010 Free length: 70 mm  Wire diameter: 2 mm Outside diameter: 12,5 mm  Sold individually

BLACK HIGH-TEMPERATURE PAINT

REF: PM372.10D Diameter: 40 mm Available in 25 cm or per meter

EXHAUST SPRING

EXHAUST HOSE

EXHAUST SPRING

REF: PMFR373.002 Free length: 51,50 mm  Wire diameter: 2,30 mm Outside diameter: 16 mm  Sold individually

COLOURLESS HIGH-TEMPERATURE VARNISH

REF: AC672.003 Black paint which is resistant to temperatures up to 650°C.

REF: AC673.001 Colourless varnish which is resistant to temperatures up to 300°C.

Capacity: 400 ml

124

REF: PM373.003 Free length: 135 mm  Wire diameter: 1,5 mm Outside diameter: 12 mm  Sold individually

· USE · USE

· USE · U SE

SE ·U · USE · USE

Free length

·U

Ø wire

ALUMINIUM ENGINE MOUNT FLANGE

STEEL ENGINE MOUNT FLANGE

REF: PC0512.00D Solid machined aluminium clamp. Sold individually.

REF: PC0512.01D Ultra-flat steel clamp. For all types of engine. Sold individually.

Diameters: 28 mm - 30 mm - 32 mm

TEKNEEX ENGINE MOUNT 8°

No drilled engine mount 8°. Ø 28 Ø 30 Ø 28 - Ø 30 - Ø 32 (Universal)

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

Ref: PC0511.037 Ref: PC0511.040 Ref: PC0511.025

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

126

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

TOOLS 128 Tools for karts 131 Tools for tyres 134 Tools for engines

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

127

KART TOOLS

T-SHAPED SOCKET WRENCH

REF: OU912.00T Its lenght allows you to reach the most inaccessible spots. Diameter n°8 Diameter n°10 Diameter n°11 Diameter n°13

REF: OU912.004 REF: OU912.001 REF: OU912.002 REF: OU912.003

T-SHAPED ALLEN KEY

REF: OU911.00T Very high quality with reinforced tip for greater strength. For Allen screws. Diameter n°3 Diameter n°4 Diameter n°5 Diameter n°6 Diameter n°8

STUB AXLE RING CENTERING DEVICE

REF: OU931.007 Tool specially designed to make it easier to install hub rings by sliding them into place (for SODI chassis).

FRONT WHEEL ALIGNMENT DISKS

REF: OU931.003M Allows you to check the parallelism and camber of your kart’s front wheels. Sold as a pair.

HOOK WRENCH

REF: OU914.003 Tool specially designed for screwing on and off the M20 nut on SODI 25 mm diameter stub axle.

REF: OU911.001 REF: OU911.002 REF: OU911.003 REF: OU911.004 REF: OU911.005

STUB AXLE SHAFT SCREW CENTERING DEVICE

REF: OU931.006 Tool specially designed to make it easier to install chassis height adjustment rings. (for SODI chassis). Screws onto the stub axle shaft.

REAR AXLE PUSH

REF: OU956.001 Used to quickly dismantle the shaft without damaging the tip.For 50 mm diameter shaft.

4 models: for 17 mm, 20 mm, 25 mm diameter stub axle and for 3-point hubs

128

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

R3 FRONT LASER SYSTEM

REF: OU931.031 «Front Eagle eye Magtronic» is an advanced laser alignment system for Karts. Features include strong magnets, electronic laser control and power management, upgradable to work with the Caster plates and rear alignment system. These lasers are easily upgradeable to work with caster plates (reference OU931.033) & the rear magtronic laser units (reference OU931.032).

R3 REAR LASER SYSTEM

REF: OU931.032 «Rear Eagle eye Magtronic» is designed to work with the front units (reference OU931.031) to enable the chassis alignment to be checked. Containing all the superb features as the front units like strong magnets and electronic control.

R3 CAMBER PLATES

REF: OU931.033 The addition of Caster plates enables magtronic users to easily measure the Caster angle set. Needs R3 front laser system (reference OU931.031).

R3 LASER CHAIN WHEEL ALIGNER

REF: OU931.034 Laser-sighting device, used to align the chain-wheel and sprocket. Very fast and precise.

Plates fixed on R3 rear laser system.

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

129

KART TOOLS RENTAL PRODUCT

FRAME ALIGNMENT BENCH

REF: OU962.001 Revolutionary tool intended to control and measure chassis alignment without the need to disassemble any part. After a collision or impact, you must ensure that your frame is not deformed and has retained its original geometry. Can be easily folded and transported, It is the ideal equipment for workshop and on-track use. Dimensions: 99 x 83 x 15 mm  Weight: 36 Kg

BELT TENSION MEASUREMENT INSTRUMENTS

REF: OU954.006 Allows a belt tension that meets the requirements of a leasure gokart transmission. Ensures consistency in the set up of the overall gokart fleet. The kit includes: 6 interchangeable tips (tip N°5 for the belt tension set up of all SODI range), a calliper gauge to control belt thickness, a calibration jauge. Weight: 420 g

CROWN WHEEL CARRIER

REF: OU953.001 Used to transport all your sprockets with ease.

MANUAL DRAIN PUMP

REF: OU955.002

G E

BRAKE BLEEDING PUMP

REF: OU951.001 Allows you to rapidly and efficiently bleed your hydraulic brake circuit. For systems without tanks.

130

SEAT ADJUSTMENT TOOL

REF: OU931.082 For all types of gokarts. Adjustable width and height. Delivered with: specific tooling to adjust seat (mounting) brackets, specific graduated tooling to adjust seatback height.

BRAKE BLEEDING SYSTEM

REF: OU951.002 Allows you to work alone, efficiently and cleanly. Operates on the venturi principle. Delivered with an automatic re-supply system, a magnetic support and a bleed screw greasing syringe. Requires a 6 to 12 bar compressed air supply (1/4»» male quick-connect coupling). Container capacity 0.75 L. 60 % vacuum.

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

TYRE TOOLS C

A D

LOW PRESSURE MEKAONE MANOMETER

REF: OU943.002 Very high precision with plastic shock protector and large dial. Decompression valve for deflating.

REF: OU943.004 With its graduation from 0 to 2.5 bar, it offers a very high level of accuracy. Deflation valve included.

GLYCERIN MEKAONE MANOMETER

REF: OU943.003 The state-of-the-art in pressure gauges.Not sensitive to changes in temperature or atmospheric pressure, the oil (glycerine)-immersed mechanism allows the pressure to be measured extremely accurately. Plastic shock protector and large dial. Decompression valve for deflating.

VEGA MANOMETER

ROTAX DIGITAL MANOMETER

REF: OU943.005 Digital pressure gauge which not just measures but stores tires pressure. High stability in the measuring. Button for air discharge. Bar and Psi scale. Automatic auto-zero setting. Twisted pipes resistant up to 10 Bar. Possibility to memorize and display later the pressure value. 9 Volt battery supply. Plastic covering to shelter the device from any blow.

INFRARED THERMOMETER

REF: AC615.005 This infrared thermometer is ideal for measuring track, tyres, exhaust temperatures etc... until 260째 without contact. Temperature range from -30 째C to +260 째C. Temperature resolution of 0.1 째C. Pick-up time below 1 second.

FOOT PUMP

REF: OU944.002 Equipped with a large gauge with a magnifying class for easy reading and a long hose to make accessing the valve easier. The steel base increases stability. Pressure: 12 bar/180 psi.

Weight: 180 g

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

131

TYRE TOOLS A

NSR TYRE IRON

REF: OU942.004 Revolutionary in terms of speed and simplicity of use, the NSR is used to both fit and remove kart tyres.

TYRE IRON WITH RACK AND PINION

REF: OU942.003 Very high strength. Allows both sides of the tyre to be removed simultaneously and effortlessly.

LEVER-OPERATED TYRE IRON

REF: OU942.002 Easy to unstick tyres. Simple, practical and compact.

HANDY:

Makes it easy to fit and glue your tyres

STAND WHEELS EQUALIZER

LIGHT WHEELS EQUALIZER

TYRE GREASE

REF: OU941.020

REF: OU931.004

REF: LU823.003

Weight: 5 Kg

Weight: 1,65 Kg

Contents: 1 Kg

PAINT MARKER FOR TYRES

REF: AC674.001 Use this white marker to add a personal touch to your tyres. Dries quickly and wonâ&#x20AC;&#x2122;t wash off. 1 colour: White

COLORED PAINT MARKER FOR TYRES

REF: AC674.00T This liquid paint marker is essential for marking your tyres. It is a xylene-free, lowodor and fast-drying for immediate handling. The paint is indelible and waterproof. The mark size is 3 mm. 3 available colours: - Pink - Yellow - Red

132

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

I FOR PROFESSIONALS

MANUAL TYRE MACHINE

REF: OU942.012 For fitting and removing kart tyres. Quick and easy to use without damaging the wheel rim and tyre.Ideal for occasional tyre changes. Dimensions: 420 x 440 x 620 mm  Weight: 25 Kg

ELECTRIC TYRE MACHINE

REF: OU942.011 For fitting and removing kart tyres. Quick and easy to use without damaging the wheel rim and tyre. Fitted with a pedal. Essential for regular tyre changes. o Requires a 220 V supply. Dimensions: 420 x 440 x 620 mm  Weight: 33 Kg

RENTAL PRODUCT

VALVE TOOL

REF: OU941.010 Tool for fitting tubeless valves.

REF: OU941.011 Specially designed for rental karts fitted with side protectors.

VALVE CORE REMOVER

REF: OU941.005

ORDER ON-LINE ON WWW.ITAKASHOP.COM

AIR CONNECTOR

MEKAONE TYRE MEASURING TAPE

REF: OU941.001 Allows you to accurately check the circumference of your tyres once fitted.

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

133

ENGINE TOOLS

J H

M N

D E

I G A

FUEL JERRICAN

REF: AC631.00B Steel.

16 mm 21 mm

OIL MEASURING BEAKER

REF: AC632.001 Graduated oil measuring beaker. Ideal to make your own mixture. Capacity: 500 ml

OIL MEASURING COLUMN

REF: AC632.002 Graduated oil measuring column as as percentage and ml. Capacity: 500 ml

REF: OU913.004 REF: OU913.002

SPARK PLUG KEY SPRINKLERS HOLDER

REF: OU913.005 This multifunction spark plug key allows you to change your spark plug (size 21) quickly thanks to an excellent handling. This key can disassemble the nuts of Dellorto carburators. You can also tidy up your sprinklers thanks to 12 locations there planned for that purpose, and you can store your needles of carburetors inside there, by getting back them simply, thanks to its magnetized lock.

MEASURING JUG

CARBURETTOR PRESSURE GAUGE

REF: AC632.005 Graduated measuring jug. Ideal for filling of your radiator and of your fuel tank.

REF: OU924.001 Allows you to calibrate your carburettor. Delivered in its box.

Capacity: 5 L

FUNNEL

REF: AC633.001 Plastic funnel of 150 mm diameter, with hose and filter. 134

SPARK PLUG WRENCH

REF: OU913.00D Standard with ball joint. Available in 16 mm and 21 mm.

2 sizes: 10 L or 20 L

CALIPER GAUGE

REF: OU921.014 Digital caliper gauge. Accurate to within a 100th.

HOSE CUTTING DEVICE

REF: OU952.002 Allows you to cut hoses to measure. Ă&#x2DC; 46 mm.

LIGHT/MAGNIFYING GLASS FOR ENGINE CHECKUP

REF: OU926.003 Suitable for inspection of any potential engine detonation marks.

LIGHT BULB FOR LIGHT/MAGNIFYING GLASS

REF: OU926.004 Replacement light bulb for light/magnifying glass for engine check-up reference OU926.003

MINI-LIGHT FOR ENGINE CHECK-UP

REF: OU926.001 High intensity flexible light. Ideal to look at the piston head. Delivered with a light bulb and protective cover.

LIGHT BULB FOR MINI-LIGHT

REF: OU926.002 Replacement light bulb for mini-light for engine checkup reference OU926.001.

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

A K

J B

G C M H D

L E

SPRING HOOK

REF: OU952.011 Necessary tool to work safely and to ensure spring mounting without effort.

PISTON CIRCLIP ASSEMBLY TOOL

GEAR LOCKING TOOL

TANK LEVEL MEASURING TOOL

REF: OU924.010 Used to check the height level.

GEAR PULLER

REF: OU921.008 Very strong top of the range model with centring ball.

REF: OU921.001 Allows you to change the sprocket while blocking the plate in your vise. For 9 to 11 tooth sprocket.

REF: OU924.01T Used to hold the carburettor spring and the throttle cable while adjusting the needle height. Available for VHSB34 & VHSH30 carburetors.

REF: OU921.012 For 100 cc engine shaft.

CARBURETTOR SPRING TOOL

CARBURETTOR SLIDE PROTECTION

REF: OU924.014 Allows to protect carburettor slide and needle. Fits on VHSB34 carburettor.

PVL IGNITION PULLER

REF: OU922.003

REF: PMIA421.001

REF: OU925.002

IAME CLUTCH PULLER

CLUTCH PULLER

CLUTCH LOCK WRENCH

CHAIN TOOL FOR KZ ENGINES

REF: OU954.001

REF: OU914.007 Clutch blocking key for IAME Puma, X30 and Reedster.

CHAIN TOOL

REF: OU954.00M Light and very compact. Available for standard chains and KZ chains. STANDARD CHAIN KZ CHAIN

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

REF: OU954.003 REF: OU954.004

NEED SOME HELP ? +33 (0)2 40 38 26 20

135

TOOLS FOR ROTAX ENGINES F A E

D H

K J

ROTAX ENGINE FLIGHT CASE

REF: AC641.003 The aluminium, heavy duty flight case is of perfect size for the Rotax MAX (with radiator mounted) and protects the engine during transport and stocking. Dimensions: 440 x 360 x 425 mm

ROTAX JET HOLDER

REF: OU924.006 The aluminium, red anodized jet holder allows you to arrange your jets. With itÂ´s 2 magnets on the back side, it can be positioned on all magnetic surfaces easily.

JET GAUGE SET

REF: PMFR421.031 Alows to control jets gauge. Sizes: from 0,45 mm to 1,50 mm.

136

ROTAX VALVE SPRING MOUNTING TOOL

REF: PMFR421.032 Allows the assembly of the holding spring of the exhaust valve membrane.

SPRING HOOK FOR ROTAX EXHAUST SPRING

REF: PMFR421.020 Facilitates mounting of the exhaust springs.

ROTAX TOOL TO BLOCK THE CLUTCH PLATE

REF: PMFR421.033 For Rotax Max engines (except DD2).

ROTAX DD2 TOOL TO BLOCK THE CLUTCH PLATE

REF: PMFR421.019 For DD2 engines.

ROTAX PISTON LOCKING TOOL

REF: PMFR421.002 To block the piston by the spark plug hole.

ROTAX CLUTCH PULLER

REF: PMFR421.003

ROTAX FIXATION TOOL SPROCKET

REF: PMFR421.016 Allows you to change the sprocket while blocking the plate in your vise. For 11 to 16 tooth sprocket.

ROTAX WRENCH ADAPTER 11/8

REF: PMFR421.029 To remove the cylinder without removing the engine from the chassis.

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

P S

M U Q

N V O

ROTAX CARBURETTOR CONTROL TEMPLATE

REF: PMFR421.028 Allows the checking of the Dell Orto VHSB34 carburettor height level.

REF: PMFR421.000 Allows to control the cylinder head of Rotax Max engines.

REF: PMFR421.021 Allows to control, on the cylinder, the exhaust valve seat on Rotax Max and DD2 engines.

ROTAX CYLINDER HEAD TEMPLATE

ROTAX CYLINDER TEMPLATE

ROTAX EXHAUST VALVE TEMPLATE

ROTAX SPI SEAL OF CRANKSHAFT ASSEMBLY TOOL

REF: PMFR421.012

REF: PMFR421.017

REF: PMFR421.022 Allows to control the exhaust port height of Rotax Max engines.

REF: PMFR421.026 For Micro-Max «SQUISH» control.

ROTAX PISTON CIRCLIP ASSEMBLY TOOL

REF: PMFR421.008 For Rotax Max engine shaft.

TIN WIRE 2MM

REF: PMFR421.027 For Rotax Max engine «SQUISH» control (except Micro-Max).

ROTAX SPI SEAL WATER PUMP ASSEMBLY TOOL

TIN WIRE 3MM

ROTAX ENGINE SUPPORT

REF: PMFR421.010 Workshop engine support. Use with the base (reference PMFR421.011).

BASE OF ROTAX ENGINE SUPPORT

REF: PMFR421.011 Base of workshop engine support. Use with engine support (reference PMFR421.010).

MEKAONE TOOLS

MEKAONE TOOL TO BLOCK THE CLUTCH PLATE

REF: OU921.025 For Rotax Max engines (except DD2).

ORDER ON-LINE ON WWW.ITAKASHOP.COM

MEKAONE VALVE SPRING MOUNTING TOOL

REF: OU922.005 Allows the assembly of the holding spring of the valve membrane.

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

137

ENGINE TOOLS

DEDICATED PAGE FOR PRO

A B

DIGITAL BURETTE

REF: OU921.051 For accurate engine volume check.

HIGH QUALITY DIGITAL GONIOMETER

REF: OU921.050 Digital goniometer with very accuracy. Very high quality, reliable. Digital display.

DIGITAL BURETTE STAND

REF: OU921.052

PLUG INSERT

REF: OU921.053

FOR PROFESSIONALS

DIGITAL GONIOMETER

REF: OU921.049 Accurate, practical and economical ! Digital display.

CRANKSHAFTS ASSEMBLY TOOL REF: OU923.004 Tool with very accuracy to assemble your crankshafts. Very high quality. For professional.

COPPER MALLET

REF: OU923.003 1,5kg mallet to center your crankshaft.

3 diameters: 20, 25 and 30 mm

138

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

SPECIAL SA 250

SPECIAL SA 250 RENTAL KART

H I

WEIGHT ALUMINIUM ASSEMBLY TOOL

REF: OU921.026 Makes it easier to install the aluminium clutch weights of the SA 250 SE35C and SE32I engines.

FUEL PRESSURE INDICATOR

REF: OU924.002 Allows to control the fuel pressure on SA250 engines.

REF: OU921.002 Very high-precision device (to within a 100th) essential for checks.

ORDER ON-LINE ON WWW.ITAKASHOP.COM

REF: OU921.042 Makes it easier to install the clutch weights reinforced (steel) of the SA 250 SE22I engines.

MICROMETER

REF: OU921.01M Available in 25 to 50 mm and 50 to 70 mm.

DIAL GAUGE

WEIGHT STEEL ASSEMBLY TOOL

IGNITION GAUGE ADAPTOR

REF: OU921.016

CONTACT THE NEAREST ITAKASHOP STORE

JET GAUGE BOX

REF: OU924.007 Allows accurate measurement of the jets orifices diameter (box of 100 jet gauges from 1 to 2 mm 0.01 step).

DIAL GAUGE MAGNETIC SUPPORT

REF: OU921.017

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

139

140

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

LUBRICANTS / MAINTENANCE PRODUCTS 142 Oils 144 Maintenance products

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

141

OILS

XPS SYNMAX FULL SYNTHETIC OIL

REF: LU817.004 Full synthetic oil specifically developped for ROTAX engines range. Recommended use: 2-3% for Rotax engines. CIK-FIA approved. 1 Liter

XPS FULL SYNTHETIC OIL

REF: LU817.003 Full synthetic oil for ROTAX engines. Recommended use: 2-3% for Rotax engines. CIK-FIA approved. 1 Liter

XPS MAX GEAR OIL

REF: LU817.006 XPS gear oil is especially developed for the Rotax Max high performance kart engines. Reduces wear and is temperature resistant. For the correct dosage follow the engine manufacturer recommendations. Not suitable for kart engines with manual gear-boxes!

REF: LU818.001 Very performance semi-synthetic lubricant for 2- stroke race engines chiefly made of synthetic oil. EXCED RSK Evolution is the result of the most advanced studies about the 2- stroke engines lubrication and about the experience made on race field. Recommended use: 4 % for X30 engines. CIK-FIA approved. 1 Liter

EXCED RSK BLUE PRINT OIL

REF: LU818.002 Full synthetic oil for 2-stroke racing engines that use gasoline blends with or without lead. Designed specifically for KF engines, this oil is compatible with all those racing engines where maximum performance is sought to lower percentages of lubricant. Recommended for all 2-stroke engines operating at extreme high rpm (up to 20 000 rpm). Recommended use: 3% for X30 engines. CIK-FIA approved. 1 Liter

XPS DD2 GEAR OIL

REF: LU817.007 XPS DD2 gear oil is especially developed for the Rotax Max DD2 high performance kart engines. Reduces wear and is temperature resistant. For the correct dosage follow the engine manufacturer recommendations. 150 ml

142

EXCED RSK EVOLUTION OIL

100 ml

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

H I

K L SPECIFIC RENTAL KART

ELF HTX 976 OIL

REF: LU812.002 Full synthetic oil developped for 2-stroke racing engine. Avoids clogging of the segments and spark plugs. Its low ash content prevents deposits in the combustion chamber and reduces risks of pre-ignition. Specifically designed for engines with high rpm (from 12 000 to 17 000 rpm). Recommended use: 4-5 % for KZ engines and 2-3 % for Rotax engines. CIK-FIA approved. 1 Liter.

XERAMIC CASTOR EVOLUTION 2 STROKE OIL

REF: LU811.005 Xeramic Castor Evolution 2-stroke is a high-tech semi-synthetic oil for racing gokart. It is an advanced kart racing oil for optimal lubrication of all 2-stroke air- or water-cooled kart engines. This unique product has been specifically designed for racing applications where high revolutions, high loads and high temperatures prevail. Recommended use: 4-5% for KZ and X30 engines, 2-3 % for Rotax engines. CIK-FIA approved. 1 Liter

ELF HTX 909 OIL

REF: LU812.001 Semi-synthetic oil developped for 2-stroke racing engine. Avoids clogging of the segments and spark plugs. Withstands high temperatures thanks to its thermal stability and its anti-oxidant power. Specifically designed for engines with high rpm (from 17 000 to 20 000 rpm). Recommended use: 4-5 % for KZ and X30 engines. CIK-FIA approved.

SILKOLENE GEAR BOX OIL

REF: LU814.003 Lubricant oil with most advanced characteristics for gear box. Best value for money. Reduces resistance. Prevents clutch slipping and protects components against erosion. SAE 75W-80. 1 Liter

1 Liter

MOTUL KART GP 2 STROKE OIL

REF: LU815.000 Full synthetic oil specifically developped for 2-stroke racing engine. Recommended use: 4-5 % for KZ engines, 2-3 % for Rotax engines. CIK-FIA approved. 1 Liter

KARTLUB 4 STROKE 10W40 OIL RENTAL PRODUCT

REF: LU814.007 Specifically designed for the 4-stroke rental engines. 2 liters. 2 Liters

KENNOL 4 STROKE 0W30 OIL RENTAL PRODUCT

REF: LU814.012 High-tech oil for 4-stroke engine: High fluidity. Low volatility. Very high dispersing power. Very high thermal stability. Guarantees good protection of engine. Recommended for SA250 egines. 2 Liters ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

143

MAINTENANCE PODUCTS

B A

F G

XPS KART CLEANER

REF: LU838.004M A highly concentrated and effective biodegradable alkaline cleaner with a unique formulation which removes dirt easily. Completely safe to use on aluminum, chrome, synthetic material, painted surfaces, plastic and rubber parts. XPS 1,5 L pressure spray XPS Kart Cleaner 5 L

REF: LU838.004 REF: LU838.005

REF: LU838.054 This multi-purpose spray, very effective, eliminates humidity from electric contacts, spark plugs, ignition system, control units, etc. It unblocks bolts, articulations, shock absorbers, links, packings, etc. It eliminates marks of grease, tar, glue, etc. 400 ml

F B

EXCED RS PULIKART CLEANER

REF: LU838.052 This detergent degreases and cleans the chassis, the motor and the parts in plastics in effective and fast way with a simple application. 500 ml

WD 40 - WAX & POLISH

REF: LU833.009 This product is designed to give a deep glossy shine. Recommended use:paintwork, aluminium, chrome, carbon fibre, plastic. 400 ml

WD40 - TOTAL WASH

REF: LU834.003 Very high quality cleaner for all types of support.

REF: LU833.008 This product is an all-purpose cleaner designed to quickly cut through traffic film and track grime. This formula leaves a great finish and is sage to use on paintwork, plastic, rubber, aluminium, chrome, carbon fibre and disc pads. Recommended use: bodywork, components, carbon fibre.

1 Liter

MOTUL MOTOWASH

H D

XPS CERAMIC MULTI SPRAY

REF: LU838.002 General maintenance lubricant, with high-tech ceramic material, for lubrication and protection of bearings, ball bearings, cables etc. It has excellent water-resistance, great penetrating characteristics and sticks to any surface. Resists high temperatures. Protects against corrosion and preserves rubber parts. 500 ml

144

EXCED RS WD PENETRATING-LUBRICATING OIL

KART CLEANER «WD40»

REF: LU833.00M Multi-purpose, WD 40 is a proven product found in paddocks worldwide. It cleans, protects, lubricates and drives away moisture. Available in 200 ml, 400 ml, 5 L, spray head. WD 40 - 200 ml WD 40 - 400 ml WD 40 - 5 L WD 40 - Spray head

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

REF: LU833.003 REF: LU833.004 REF: LU833.005 REF: LU833.010

M O P

XPS VISOR CLEANER

REF: LU838.001 For thoroughly and effective cleaning of the helmet visor. Removes greasy finger marks and squashed insects without a problem and gives a sparkling finish to the helmet visor.

WYNN’S BRAKE CLEANER

REF: LU835.001 High pressure aerosol for cleaning and removal of grease marks of all your mechanic parts. This cleaner restores brakes & clutch performance. 500 ml

200 ml

HELMET CLEANING KIT

REF: LU833.002 Bell helmet cleaning kit including: 250 ml. wax free polish, 250 ml. shield cleaner and 2 microfibre cleaning cloths.

XPS CARBURETTOR CLEANER

REF: LU838.003 This cleaner dissolved gum, carbon and varnish deposits without dismantling the carburettor. Suitable for all types of carburetors. 500 ml

XPS BRAKE CLEANER

REF: LU838.006 Biodegradable multi cleaner for cleaning of brake components etc. Contains no chlorinated hydrocarbons. Does not corrode plastic and rubber components. A versatile, high-grade cleaning agent that even dissolves resinified contamination.

SUPER BLUE RACING DOT4 BRAKE FLUID

REF: LU842.010 Designed for racing use only (forbidden on open road), this brake fluid «Super Blue Racing» DOT4 type, blue-coloured, is renowned for its great performance and is used by the greatest racing teams. 1 Liter

XPS DOT4 BRAKE FLUID

REF: LU842.003 XPS brake fluid DOT4 has been developed for use in all hydraulically operated brake and/or clutch systems where a DOT4 is specified. 250 ml

BENDIX DOT4 BRAKE FLUID

REF: LU842.013 For use in all hydraulically operated brake where a DOT4 is specified. 500 ml

500 ml

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

145

MAINTENANCE PODUCTS

XPS SYNTHETIC CHAIN GREASE SPRAY

RK CHAIN GREASE SPRAY

REF: LU827.002 This synthetic chain spray, based on ceramic material, does not dry-out, it keeps the chain flexible and is heat-resistant.

REF: LU825.005 Very high resistance to high temperatures. Excellent penetration.

500 ml

400 ml

XPS WHITE CHAIN GREASE SPRAY

MOTUL C5 CHAIN GREASE PASTE

REF: LU827.001 Based on high-tech ceramic material for optimal and long-term lubrication and protection under all circumstances. Great adhesive qualities, superb penetration, corrosion resistance, reduces wear and friction, keeps the chain flexible and is heat resistant. O-ring chain tested.

REF: LU824.002 White lubricating paste with brush applicator tip specially designed to lubricate all kart chains. Avoid fling at high speed. Increases the life of the chain: reduces friction, resists water and salt, prevents from rust.

500 ml

150 ml

EXCED RS EXTREME CHAIN GREASE SPRAY

REF: LU828.002 This synthetic lubricant, with Teflon, has high features of adhesiveness of penetration and lubication to the most extreme conditions. It reduces frictions and chainâ&#x20AC;&#x2122;s temperature from 7 to 8 degrees compared to a universal grease.

PFG110 GREASE TUBE

REF: LU823.004 Grease specially developed for lubricating moving parts of the braking system. 25 g

400 ml

146

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

XPS INSTANT GASKET

REF: LU851.005 XPS black instant gasket is designed to withstands high temperatures up to 250째C (intermittent). Temperature range -73째C up to +250째C. Resists transmission fluids, water, oil and anti-freeze. Low volatile.

RAPID UNIVERSAL GLUE

REF: LU861.006 Instantaneous glue with cyanoacrylate. For very fast and strong bonding of PVC, rubber, metals, glass, cardboard, fabric, etc... Quick-drying, colourless. 20 g

200 ml

M H

732 RTV SILASTIC

REF: LU851.003 Silicon transparent mastic for sealing exhausts.

8151 ANTI SEIZE LOCTITE

REF: LU861.004 Lubricant for easy dismantling of exhaust brackets. 50 ml (spray)

90 ml

N I

CAF 1 GASKET SEALING COMPOUND

REF: LU851.002 For a perfect seal on engine crankcases.

243 FRENETANCH LOCTITE

REF: LU861.001 Regular strength threadlocker. 24 ml

100 g

O J

BLUE GASKET SEALING COMPOUND

REF: LU851.001 Sealing compound.

221 PURPLE LOCTITE

REF: LU861.002 Low strength threadlocker. 10 ml

100 g

P K

ALUMINIUM TAPE

REF: AC675.001 Adhesive tape resistant to high temperatures.

648 GREEN LOCTITE

REF: LU861.003 Bearing bond. High strength. 5 ml

50 mm wide, 50 m roll ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

147

148

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

ACCESSORIES 150 Data acquisition 153 Measure instruments and cameras 154 Race numbers and plates 155 Kart accessories and various 156 Trolleys

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

149

AIM DATA ACQUISITION

ADDITIONAL FEATURES

MyChron 4/2T can log and display - together with RPM and laptimes - data related to two temperatures, coming from one thermocouple and one thermoresistor;

GPS CONNEXION > MYCHRON 4 OR 4/2T

Via Mychron Expansion (REF: AC611.049) or Data Hubs (REF: AC611.050 and REF: AC611.051).

MYCHRON COMMON FEATURES Digital graphic display in a choice of amber or green background Configurable LED alarms Configurable LED shift alert

MYCHRON 4

Intuitive menu design for individual configuration Long battery life (up to 200 hours with an internal 9V battery) 1 Mb Memory (3h)

MYCHRON 4 2T

REF: AC611.034

REF: AC611.035

1 Mychron 4  1 magnetic sensor  1 clip ignition sensor  M10 water temperature sensor + 1 extension wire TR

1 Mychron 4/2T  1 magnetic sensor  1 clip ignition sensor  M10 water temperature sensor + 1 double connexion wire (1TC + 1TR)

The AIM Mychron 4 and MyChron 4/2T Lap Timer Data Acquisitions Systems are complete instruments to sample, view and record kart engine parameters and lap data. The basic unit is a multifunction system which in basic configuration logs and stores lap times, engine temperature and RPM readouts. The unit display enables the driver to view clear, easy to read numerical read outs on track (such as lap times and lap number) or graphical review displays.

MYCHRON 4 AND MYCHRON 4/2T GPS

REF: AC611.048 GPS technology represents a true revolution in data acquisition. Thanks to this GPS Module and its GPS Manager software, you can immediately get laptimes and all data needed for engine tuning as well as for improving driving technique. This GPS Module is fast in satellite signal acquisition and reliable in adverse situations. Thanks to this GPS Module, you’ll get: position, speed, cornering in-line: lateral and longitudinal G, automatic lap times. Delivered with: 2 ways data hub and “GPS Manager” software

SUPER B BATTERY

REF: PM364.020 This battery, made with lithium-ion technology, is perfect as extern battery to feed any data acquisition. Specifications: Nominal capacity and voltage 2600 mAh / 34 Wh / 13.2 V - Very light weight (475 g) and very small (114 mm x 81.25 mm x 35 mm). Reload very quickly with SUPER B battery charger (REF: PM364.021). Resistant to extreme temperatures: -20 ° to +60 °. Low self-discharge rate: 10% per year. Long lifetime.

150

SUPER B BATTERY CHARGER

REF: PM364.021 Battery charger specifically designed for SUPER B batteries (REF: PM364.020). Technical data: input voltage: 100-240 V+/-10%, 50/60 Hz. Battery Types: Super B 2600 and 5200. Charge-method: CCCV. Battery nominal voltage: 13.2V. Max. charge current: 2.5A. Charge end voltage: 14.4V. Case protection IP20. 2 indicators: LED green: power-on / charge and LED yellow: charge indicator.

SODI STICKER FOR MYCHRON 4

REF: AC701.068 SODI adhesive sticker for AIM Mychron 4 and Mychron 4/2T.

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

I H 1

LAMBDA CONTROLLER

REF: AC611.071 Lambda controller allows to perfectly tune the carburetion of your engine thanks to the analysis of exhaust gas emission. Connects to Mychron 4 or Mychron 4/2T via Mychron Expansion (REF: AC611.049) or 4 ways Data Hub (REF: AC611.051).

DATAKEY

REF: AC611.046 The DataKey is a load key to analysis saved information of Mychron 4 and Mychron 4/2T. Delivered with Race Studio analysis software.

REF: AC611.05T Data hub is is a channel multiplier. It connects directly to Mychron 4 and Mychron 4/2T. 2 WAYS 1 4 WAYS 2

ORDER ON-LINE ON WWW.ITAKASHOP.COM

REF: AC611.050 REF: AC611.051

REAR AXLE SPEED SENSOR

REF: AC611.066 Connects to Mychron 4 or Mychron 4/2T via Mychron Expansion (REF: AC611.049) or 4 ways Data Hub (REF: AC611.051).

MYCHRON EXPANSION

REF: AC611.049 MyChron Expansion is the channel multiplier improving MyChron4 and MyChron4/2T performances, thanks to four additional channels (Temperature sensors, valve sensor, pedals throttle or brake sensor) and a further connector to connect GPS, LCU Lambda controller, DataKey, etcâ&#x20AC;Ś Mychron Expansion is equipped with wires to connect an external supply (as the Super B battery rerence PM364.020).

DATAHUB

PEDAL POSITION SENSOR

REF: AC611.069 The accelerator/brake pedal position sensor provides a precise indication of timing and intensity of braking/ acceleration. Which permits to understand if the driver has accelerated or braked at the right moment and with the correct strength. Connects to Mychron 4 or Mychron 4/2T via Mychron Expansion (REF: AC611.049) or 4 ways Data Hub (REF: AC611.051).

CONTACT THE NEAREST ITAKASHOP STORE

REAR MAGNET RING

REF: AC611.067 Ring diameter 50 mm for rear axle speed sensor (REF: AC611.066).

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

151

AIM DATA ACQUISITION C

B A

J K

MAGNETIC SENSOR

REF: AC611.068 Included in Mychron 4 and Mychron 4/2T kit.

CLIP IGNITION SENSOR

REF: AC611.043 Included in Mychron 4 and Mychron 4/2T kit.

SPARK PLUG TEMPERATURE SENSOR

REF: AC611.045 Direct fitting between spark plug and cylinder head.

STANDARD EXHAUST GAS TEMPERATURE

REF: AC611.080 M5 fitting. This sensor is a thermocouple (TC). Wire lenght of 30 cm. Connexion to extension wire TC (REF: AC611.085).

KF/KZ EXHAUST GAS TEMPERATURE

REF: AC611.081 Especially designed for KF and KZ engines direct fitting. This sensor is a thermocouple (TC). Wire lenght of 30 cm. Connexion to extension wire TC (REF: AC611.085).

EXTENSION WIRE TC

REF: AC611.085 Extension wire of 1.5 meter for thermocouple sensor (TC).

M10 WATER TEMPERATURE SENSOR

REF: AC611.076 This sensor is a thermoresistor (TR). Wire lenght of 35 cm. Connexion to extension wire TR (REF: AC611.086).

EXTENSION WIRE TR

EXHAUST GAS POWER VALVE SENSOR

REF: AC611.070 Exhaust gas power valve sensor provides a very accurate indication of the valveâ&#x20AC;&#x2122;s opening and closing. Data are immediately visible on Mychron 4 and Mychron 4/2T and can be analyzed with Race Studio software. Connects to Mychron 4 or Mychron 4/2T via Mychron Expansion (reference AC611.049) or 4 ways Data Hub (REF: AC611.051).

M10 WATER TEMPERATURE SENSOR SLEEVE

REF: AC611.060 Used to fix the M10 water temperature sensor (REF: AC611.076) on the cooling circuit of engines without M10 hole.

ALKALINE BATTERY 9V

REF: PC0711.072 For Mychron 4 or Mychron 4/2T.

REF: AC611.086 Extension wire of 1.5 meter for thermoresistor sensor (TR).

152

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

MEASURE INSTRUMENTS AND CAMERAS

B IDEAL RENTAL KART

TOP

QUALITY

A C IDEAL RACING

WWW.ITAKASHOP.COM

For more information about AIM SmartyCam camera.

AIM MULTICHRON CHRONOMETER

REF: AC611.000 The reference amongst hand-held stopwatches. Allows you to record the times of up to 4 drivers simultaneously. Intermediate times, average speed. Possible to transmit data to a PC via infra-red link. Memorises 100 times. Colour: Black

WATER TEMPERATURE THERMOMETER

REF: AC612.202 Digital temperature thermometer with probe.

HOUR METER

REF: AC611.021 Hour meter for mono and bicylinder petrol engines, 2 & 4 strokes. Fully automatic, this hour meter operates as of first engine start. Set up is completed by connecting to the « anti parasite » wire. It records the engine time (non erasable) up to 5 000 hours. Helps you to live-monitor your gokart service intervals.

KARTECH HOUR METER

REF: AC611.040 The Kartech hour meter is a perfect low cost option for keeping exact engine running time record. Functions: 2 recording functions: non resetable total running time or resetable running time. Suits both 2- and 4-stroke engines. Attach directly to the spark plug lead or remotely via an antenna lead. 5 000 hour battery life.

AIM SMARTYCAM HD CAMERA

REF: AC618.006 This AIM camera overlays data from GPS and Mychron 4 on the videos themselves: Speed, RPM, throttle, engaged gear, acceleration, temperatures, etc…

ON BOARD CAMERA MAGIC CAM

TOP VALUE FOR MONEY

REF: AC611.070 Pro onboard camera AEE SD 23 - Extra wide angle 175 °. - Photo resolution:16 Mégapixels. - Lens: f 2,6 Fish-eye for a better capture of the light. - Zoom: numeric zoom x10. - 2h of autonomy, 4h with the additional battery (included). - Full HD video resolution:1080p, 1080i, 960P or 720p and WVGA.

- Pictures per seconde:1080i 50/60fps - 1080p 25/30fps 960p 25/30fps - 720p 25/30/50/60fps. - Burst function: 10 pictures/seconde. - Microphone function. - Max 64GB Micro SD (not included). -Laser sighting: indispensable to centre your video/photo when your camera is fixed

Content of the pack: 1 waterproof and shockproof case: until 100 meters.  1 battery (1000 mAh).  1 bacpac battery (1000 mAh).  1 waterproof remote control: until 3 meter underwater  1 removable LCD screen.  1 universal mount.  2 incurved mount with 3M adhesives  2 plane mount with 3M adhesives  1 mount for waterproof case  1 mount to fix your camera without its waterproof case  1 vidéo cable and 1 USB cable  1 pocket  1 CD-Rom

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

153

RACE NUMBERS AND PLATES H

K D

APPROVED BLACK RACE NUMBERS

REF: PC0642.15N Self-adhesive numbers pre-cut to the shape of the figure. Black colour. Numbers from 0 to 9. CIK-FIA approved. Dimensions: 15 x 6 cm

APPROVED WHITE RACE NUMBERS

REF: PC0642.16N Self-adhesive numbers pre-cut to the shape of the figure. White colour. Numbers from 0 to 9. CIK-FIA approved. Dimensions: 15 x 6 cm

BLACK RACE NUMBERS

REF: PC0642.14N Self-adhesive numbers pre-cut to the shape of the figure. Black colour with white contour. Numbers from 0 to 9. Maximum numbers dimension: 16 x 8,5 cm

RED RACE NUMBERS

REF: PC0642.11N Self-adhesive numbers pre-cut to the shape of the figure. Red colour with black contour. Numbers from 0 to 9.

YELLOW SELF-ADHESIVE FRONT PANEL

REF: PC0642.001 Maximum numbers dimension: 22 x 21 cm

PLASTIC NUMBER PLATE

METAL AND ADHESIVE NUMBER PLATE RENTAL PRODUCT REF: PC0642.067 Flexible metal plate and adhesive to stick directly onto the front panel. Dimensions: 23,5 x 20,5 cm

REF: PC0642.05C Colours: Yellow, Red, Blue and White Dimensions with the border: 21,5 x 21,5 cm

WHITE STICKER FOR AXLE COVER RENTAL PRODUCT

REF: PC0642.066 Ideal to display numbers on the rear of karts. To be used with the adhesive numbers for rear axle cover (Ref: PC0642.20N). Dimensions: 8 x 8 cm

REAR ADHESIVE NUMBERS RENTAL PRODUCT

REF: PC0642.20N To stick on the white sticker of rear axle cover (Ref: PC0642.066).

SCREW METAL NUMBER PLATE RENTAL PRODUCT

REF: PC0642.069 Screw metal plate on front panel in case of using magnetics numbers or adhesives numbers stuck on magnetic number plate (Ref: PC0642.068). Dimensions: 18 x 18 cm

MAGNETIC NUMBER PLATE RENTAL PRODUCT

REF: PC0642.068 Magnetic plate to fit directly onto the metal and adhesive number plate (Ref: PC0642.067) or onto the screw metal number plate (Ref: PC0642.069). Can be stuck on beforehand, with the race numbers, to change quickly the running order. Dimensions: 23,5 x 20,5 cm

Dimensions: 6 x 2,5 cm

Maximum numbers dimensions: 16 x 8,5 cm 154

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

KART ACCESSORIES AND VARIOUS

2 2

SODI KART RACING KART COVER

REF: AC644.005 100% nylon, black. Double thickness in line with the exhaust and engine. Waterproof. Marked with Sodi Kart Racing silk-screen printed logo on both sides and on the front.

KART MANUAL

Chassis manual Engine manual

BOX’S KART COVER

REF: AC644.002 100% nylon, black. Double thickness in line with the exhaust and engine. Waterproof.

ROTAX KART COVER

REF: AC644.009 100% nylon, white and black. Waterproof.

LEAD WEIGHT

REF: AC651_00P These lead weights allow you to perfectly balance the weight of your kart.

REF: LI01.2M Whether you’re a novice or an experienced driver, you’ll find everything you need to know about karting in these manuals. 1 2

1 2

1 KILO 2 KILOS

TOP QUALITY

REF: AC651.001 REF: AC651.002

REF: LI01.21 REF: LI01.22

MOJO TYRES BAG

REF: AC642.004 Horizontal opening MOJO tyre bag. «MOJO» logo print on both sides. Transparent window (11 * 15 cm) for inserting an identification sheet. Bag dimensions: 72 x 30 cm.

ORDER ON-LINE ON WWW.ITAKASHOP.COM

BOX’S TYRES BAG

REF: AC642.003 Top-of-the-range vertical opening transport bag. Very strong synthetic material. Transparent window for inserting an identification sheet.

CONTACT THE NEAREST ITAKASHOP STORE

TYRE STACK

REF: AC642.005 Puts an end to the problem of transporting your mounted tyres. Can be hooked up for storage. Top-of-the-range finish.

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

155

TROLLEYS B

BLACK KART TROLLEY

REF: AC661.011 Ideal for transporting your kart. Delivered complete as a kit. Supports a maximum weight of 120 kg. Weight: 16 Kg

STONE KART TROLLEY

ELECTRIC KART TROLLEY

REF: AC661.014 Very easy to handle, highly stable transport trolley under all conditions and on all surfaces. Front directional wheels. The gokart position on the trolley allows an easy access all over the gokart. Plastic tool-box. Easy to fold. Supports a maximum weight of 150 kg.

REF: AC661.015 Electric kart trolley very easy to use. Features: built in aluminium, 260 mm front wheels puncture proof, 160 mm swivel casters, removal battery (2 x 12V - 7A/h), battery charger. Length: 95cm. Width: 75cm. Closed height: 32cm. Suitable for karts up to 100 kg.

Weight: 13 Kg

Weight: 26 Kg

FOR

PROFESSIONNALS

KARTUP MAXI LIFT TROLLEY

REF: AC661.013 Designed for karting professionals, the kart lift has become an essential tool for working single-handed. Only one person is needed to raise a kart in just 25 seconds. Weight lifted: up to 200 kg maximum.

TRACKSIDE TABLE

REF: AC661.101 Folding trackside table. Compact size, ideal for trackside work.

VERTICAL KART STOWAGE

REF: AC663.001 Allows your kart to be transported and stowed at home, in the paddock and in your vehicle.

Dimensions: L 94 cm - l 44 cm - H 89 cm Folded: L 122 cm - l 44 cm - H 12,5 cm

Weight: 110 Kg

156

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

L'AUTONOMIE SUR LES CIRCUITS

Folded version

G I

Folded version

DRIV’ UP FIRST TROLLEY

DRIV’ UP PRO TROLLEY

REF: AC661.008 Suitable for karts up to 80 kg. Features: trolley in anodized aluminium, 4 gas springs for lifting assistance, rotative front cross beam with protective covering on the parts in contact with the kart, front frames and rear telescopics, adjustable lifting height to 77 cm and 82 cm, automatic locking in rolling position, 4 inflatable wheels Ø260 mm with roller bearings.

REF: AC661.004 Suitable for karts up to 100 kg. Features: trolley in chromium steel, 4 gas springs for lifting assistance, front frames and rear telescopics, adjustable lifting height to 77 cm and 82 cm, automatic locking in rolling position, wheel cut-off by foot lever, 4 inflatable wheels Ø260 mm with roller bearings, integrated tool rack with a rubber mat.

Weight 15 kg. Folded dimensions: 82 cm x 85 cm x 26 cm

Weight 19 kg. Folded dimensions: 82 cm x 88 cm x 26 cm

DRIV’ UP ELECTRIC TROLLEY

REF: AC661.005 Suitable for karts up to 130 kg. This trolley, in chromium steel, allows the kart to be lifted, loaded and moved by one person. Features: 4 inflatable wheels Ø260mm with needle roller bearings, protective covering on the parts in contact with the kart, wheel lockup by foot lever, fast electric jack (25s), lifting height: 75cm. Delivered with: gel cell lead/acid battery 24v 2,9Ah, in a detachable synthetic case, battery charger 230v/24v. 40-cycle autonomy (lifting-setting down) before recharging. Weight 35 kg. Folded dimensions: 110 cm x 80 cm x 30 cm

DRIV’ UP HOOKS FOR PLASTIC REAR BUMPERS

REF: AC661.007 Driv’ Up hooks for plastic rear bumpers. They fit on all Driv’ Up trolley. Delivered with scew.

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

WHEEL FOR DRIV’ UP FIRST, ONE AND LIGHT TROLLEY

REF: AC662.008 260 mm inflatable wheel with bearings for DRIV’UP ONE, DRIV’UP LIGHT and DRIV’UP FIRST (Ref: AC661.008) trolley. Sold individually.

SOLID TROLLEY WHEEL

REF: AC662.009 Universal polyurethane solid wheel with bearings (21 mm diameter). Fits on most kart trolleys. Dimensions: 2.50-4 (220 mm). Sold individually. Dimensions: 2.50-4 (220 mm)

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

157

158

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

TYRES 160 Mojo tyres 163 Bridgestone tyres 164 Vega tyres 165 Vega and Komet tyres 166 Lecont tyres and studded tyres 167 Rental - Leisure tyres

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

159

MOJO TYRES

HARD

MOJO F1 TYRE

REF: PNMO1.00T Approved Nationale class tyres. FRONT 4.5/10.0-5

REF: PNMO10.001

REAR 7.1/11.0-5

REF: PNMO1.002

MEDIUM B

MOJO F2 TYRE

REF: PNMO9.00T Approved Rotax Max, Max EVO, Max Master, Max EVO Master class tyres for Rotax «Coupe de Marque» (NSK, Challenge Rotax, etc...). FRONT 4.5/10.0-5

160

REF: PNMO9.001

REAR 7.1/11.0-5

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

REF: PNMO9.002

SOFT

MOJO D3 TYRE

REF: PNMO8.00T Approved DD2 class tyres for Rotax «Coupe de Marque» (NSK, Challenge Rotax, etc...) and Rotax Euro Challenge. FRONT 4.5/10.0-5

REF: PNMO8.001

REAR 7.1/11.0-5

REF: PNMO8.002

MOJO W2 TYRE

REF: PNMO7.00T Approved Rotax Max and DD2 class rain tyres for Rotax «Coupe de Marque» (NSK, Challenge Rotax, etc...) and Rotax Euro Challenge. FRONT 4.5/10.0-5

ORDER ON-LINE ON WWW.ITAKASHOP.COM

REF: PNMO7.001

CONTACT THE NEAREST ITAKASHOP STORE

REAR 6/11.0-5

SHIPMENTS WITHIN 24H (see the practical guide page 4)

REF: PNMO7.002

NEED SOME HELP ? +33 (0)2 40 38 26 20

161

MOJO TYRES

HARD

MOJO D1 TYRE

REF: PNMO1.00T Approved Rotax Junior class tyres for Rotax Euro Challenge. FRONT 4.5/10.0-5

REF: PNMO1.001

REAR 7.1/11.0-5

REF: PNMO1.002

MEDIUM B

MOJO D2 TYRE

REF: PNMO6.00T Approved Rotax Max class tyres for Rotax Euro Challenge. FRONT 4.5/10.0-5

162

REF: PNMO6.001

REAR 7.1/11.0-5

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

REF: PNMO6.002

BRIDGESTONE TYRES

HARD

BRIDGESTONE YDS TYRE

REF: PNBR31 Approved Minime Cadet class tyres. FRONT 4.0/10.0-5

REF: PNBR31.001

REAR 5.0/11.0-5

REF: PNBR31.002

MEDIUM B

BRIDGESTONE YLZ LEISURE TYRE

REF: PNBR63 Ideal in leisure use. FRONT 4.5/10.0-5

ORDER ON-LINE ON WWW.ITAKASHOP.COM

REF: PNBR63.001

CONTACT THE NEAREST ITAKASHOP STORE

REAR 7.1/11.0-5

SHIPMENTS WITHIN 24H (see the practical guide page 4)

REF: PNBR63.002

NEED SOME HELP ? +33 (0)2 40 38 26 20

163

VEGA TYRES

HARD

VEGA CADETTI TYRE

REF: PNVE1 Approved Minikart class tyres. FRONT 4.0/10.0-5

REF: PNVE1.001

REAR 5.0/11.0-5

REF: PNVE1.002

MEDIUM

VEGA SL4 TYRE

REF: PNVE24.00T Approved KZ125 class tyres. FRONT 4.5/10.0-5 REAR 7.1/11.0-5

164

VEGA W5 TYRE

REF: PNVE20.00T Approved KZ125 class rain tyres. REF: PNVE24.001 REF: PNVE24.002

FRONT 4.2/10.0-5 REAR 6.0/11.0-5

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

REF: PNVE20.001 REF: PNVE20.002

VEGA AND KOMET TYRES

SOFT

MEDIUM D

VEGA XH TYRE

REF: PNVE23.00T Approved KFJ class tyres.

VEGA XM TYRE

REF: PNVE22.00T Approved KF and KZ class tyres.

FRONT 4.5/10.0-5 REAR 7.1/11.0-5

REF: PNVE23.001 REF: PNVE23.002

FRONT 4.5/10.0-5 REAR 7.1/11.0-5

REF: PNVE22.001 REF: PNVE22.002

MEDIUM

KOMET K1H TYRE

REF: PNKO1.00T Approved X30 class tyres. FRONT 4.5/10.0-5 REAR 7.1/11.0-5

ORDER ON-LINE ON WWW.ITAKASHOP.COM

KOMET K1W TYRE

REF: PNKO2.00T Approved X30 class rain tyres. REF: PNKO1.001 REF: PNKO1.002

CONTACT THE NEAREST ITAKASHOP STORE

FRONT 4.2/10.0-5 REAR 6.0/11.0-5

SHIPMENTS WITHIN 24H (see the practical guide page 4)

REF: PNKO2.001 REF: PNKO2.002

NEED SOME HELP ? +33 (0)2 40 38 26 20

165

LECONT AND STUDDED TYRES MEDIUM

LH 03 EES LECONT TYRE

REF: PNLE3 Approved endurance class tyres. FRONT 4.5/10.0-5 REAR 7.1/11.0-5

CIK W LH 06 LECONT TYRE

REF: PNLE2 Approved endurance class rain tyres. REF: PNLE3.001 REF: PNLE3.002

FRONT 4.2/10.0-5 REAR 6.0/11.0-5

SPECIFIC FOR

SNOW

WINTEC STUDDED TYRE

REF: PN001.001 The best studded tyre on the market. Perfectly suited to ice rinks and tracks on snow. Dimensions: 11.5/4.0-5. 132 studs.

166

NON-STUDDED SNOW TYRE

REF: PN002.001 Specially designed for tracks on snow. Dimensions: 11.0/4.0-5

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

REF: PNLE2.001 REF: PNLE2.002

RENTAL AND LEISURE TYRES THE REFERENCE

RENTAL GO KART THE REFERENCE

HARD

DURO TYRE

REF: PNDR2 Rental tyre. Good handling and very durable. FRONT 4.5/10.0-5

REF: PNDR2.001

ITAKA MK3 TYRE

HARD

REF: PNIT2 Specially designed for rental use, the ITAKA MK3 tyre has exceptional durability whilst achieving very high performance. It has an unrivalled price / handling / durability ratio. FRONT 4.5/10.0-5 REAR 7.1/11.0-5

ORDER ON-LINE ON WWW.ITAKASHOP.COM

REF: PNIT2.001 REF: PNIT2.002

CONTACT THE NEAREST ITAKASHOP STORE

REAR 7.1/11.0-5

REF: PNDR2.002

MEDIUM ITAKA MK3 R TYRE

REF: PNIT3 This is the racing version of the MK3. It improves the kart’s grip.

FRONT 4.5/10.0-5 REAR 7.1/11.0-5

SHIPMENTS WITHIN 24H (see the practical guide page 4)

REF: PNIT3.001 REF: PNIT3.002

NEED SOME HELP ? +33 (0)2 40 38 26 20

167

168

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

TRACK EQUIPMENT 170 Electronic 172 Track accessories 173 Paddock tents

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

169

DEDICATED PAGE FOR PROFESSIONALS

ELECTRONIC

A F E

XTRA LONG RANGE REMOTE CONTROL

REF: AC614.03M No more uncontrollable drivers on your track! Remote speed control system by portable remote control. For controlling track signage. Programming of maximum engine speed. Automatic kart speed reduction on certain sections of the track (e.g. stands). Delivered with the charger with 4 adaptors (following the country). Requires batteries not included. Available for fuel and electric kart

XTRA MINI REMOTE CONTROL

REF: AC614.030 The Xtra.Mini Remote Control offers the ultimate in Kart & Track Control. It is specially designed for easy operation and low cost Kart and Track Control. This «mini» Remote Control has 3 buttons fully programmable mean simple operation: - Controls your karts - Controls your race lights - Controls of race timing software - Controls your track sectors Lightweight and easy to carry around the track, this «mini» Remote control can be used for fuel and electric karts.

170

CHARGER FOR XTRA REMOTE CONTROL

REF: AC614.034 Charger for the Xtra remote control with 4 adaptors (following the country).

CASE FOR XTRA REMOTE CONTROL

REF: AC614.033 Convenient carrying case for your XTRA remote control.

SAFETY COVER FOR XTRA REMOTE CONTROL

REF: AC614.046 Essential protection for your XTRA remote control.

1.2V RECHARGEABLE BATTERY

REF: AC614.032 AA 1,2V rechargeable battery for Xtra long range remote control. Sold individually.

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

DEDICATED PAGE FOR PROFESSIONALS

G I K

J L

XTRA SHUTDOWN TRANSPONDER

REF: AC614.04M Allows kart speed to be reduced remotely using the Xtra long range remote control (REF: AC614.03M).Fixes easily to one of the frameâ&#x20AC;&#x2122;s tubes. Shutdown transponder equipped with an internal voltage limiter. Requires one transponder per kart.

ANTENNA FOR XTRA EXTENDER

REF: AC614.045 Spare flexible antenna for Xtra extender (REF: AC614.047)

TRANSPONDER BUNDLE

REF: PC0712.130 Only available for electrics karts equipped with shutdown transponder (REF: AC614.043).

XTRA RANGE EXTENDER

REF: AC614.047 Extensor for Xtra sector beacon unit (REF: AC614.039). With this extension, even longest circuits benefit from the XTRA speed limiting system.

Avalaible for fuel and electric kart

XTRA SECTOR SENSOR

REF: AC614.038 Thanks to this sensor, the speed of karts can be reduced on certain sections of the track (e.g. stands). It connects to the transponder and operates with Xtra section unit (REF: AC614.039) via a loop system. Requires one sensor per kart.

ORDER ON-LINE ON WWW.ITAKASHOP.COM

CONTACT THE NEAREST ITAKASHOP STORE

XTRA SECTOR BEACON UNIT

REF: AC614.039 Module that determines when the kart is on a section of the track on which the speed is to be limited. Operates in conjunction with Xtra sector sensor (REF: AC614.038). At least one per installation.

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

171

DEDICATED PAGE FOR PROFESSIONALS

TRACK ACCESSORIES

RACING FLAGS

REF: AC621.0C Comply with current standards Black and white Blue, white, red Yellow with red stripes White Black

TYRES BAG-SHRINKWRAP PROCESS

REF: AC642.01C Red Blue Yellow Green Checkered

Black with orange spots Green with yellow chevrons Red cross on white background Blue with red diagonals —

4 colours: White, Blue, Red, Yellow

TRACK PROTECTION

REF: AC691.051 HD250 polyethylene. Dimensions: 3000 x 297 x 8 mm

DISPOSABLE MOBCAP

REF: EQ733.003 Sold in box of 100 pieces. 172

DISPOSABLE BALACLAVA

REF: EQ733.002 Sold in box of 100 pieces.

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

PADDOCK TENTS

TECHNICAL DATA

RRANTY

A ·W

5-YEAR

RRANTY

A ·W

- EN 13782 European safety standards. - CTS standards in accordance with NV 1965 (snow and wind). - Wind resistance +95km/h when suitably tied down. - Technical Sheet: LP 380 gr/m². - Resistance -30°C + 70°C. - Double-sided coating and varnish. - Weight: 51 kg - Folded size: 1.52 x 0.31 x 0.41 - Pole height: 3.15m - Height under fascia: min 1.90m et max 2.05m - Number of feet: 4 - Number of poles: 2 - Surface area: 13,5 m² - 5-year warranty

RRANTY WA

SODI KART RACING PADDOCK TENT 3M X 4.5M

REF: AC710.003 / AC710.004 / AC710.005 The LPTENT XP 3m x 4.5m SODI Kart Racing customized folding tent is ideal for all professionals looking for a light and solid tent, thanks to its aluminium structure, completely impermeable PVC sheet and user-friendliness. With a 4.5m SODI Kart Racing customized wall, this tent will have a perfect aesthetic finish on your races. Tent pack content: Frame + top, carrying bag, guying kit, wall bag + walls. REF: AC710.003

REF: AC710.004

1 WALL BAG CONTAINS: · 2 white full walls of 3m · 1 white full wall of 4.5m · 1 white full wall of 4.5m with SODI Kart Racing logo

RRANTY

3 WALL BAG CONTAINS: · 2 white full walls of 3m · 1 white door panel with 160cm door section (on the 4.5m SODI Kart Racing customized wall) · 1 white full wall of 4.5m

RRANTY

A ·W

1-YEAR

A ·W

RRANTY

2 WALL BAG CONTAINS: · 1 white full wall of 3m · 1 white door panel on a 3m wall with 160cm door section · 1 white full wall of 4.5m · 1 white full wall of 4.5m with SODI Kart Racing logo

ARRANTY ·W

A ·W

REF: AC710.005

PADDOCK TENT ECO SERIES 3M X 4.5M

REF: AC710.002 These ECO series LPTENT folding tents are recommended for occasional use. Eco series tent pack content: Frame + top, carrying bag, guying kit, wall bag + walls (3 solid walls and 1 wall with 90 cm door section). TECHNICAL DATA - Complies with 98/ 6 / EC Directive - Wind resistance +50km/h (when suitably tied down). - Weight: 37 kg - Folded size: 1.52 x 0.31 x 0.40 - Pole height: 3.15m

ORDER ON-LINE ON WWW.ITAKASHOP.COM

GROUND SHEET 3M X 4.5M

REF: AC710.001 This ground sheet 3m x 4.5m is perfect for your paddock tent for a aesthetic finish. 700gr/m2 PVC sheet with eyelet every 40cm. Colour: grey Supplied with a carrying bag.

- Height under fascia: min 2.00m et max 2.30m - Number of feet: 4 - Number of poles: 2 - Surface area: 13,5 m² - 1-year warranty

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

173

INDEX A

ACCELERATOR CABLE.............................................................121 ACCELERATOR PROTECTIVE SLEEVE.....................................120 ACCELERATOR PROTECTIVE SLEEVE PROTECTION...............120 AIR BOX...................................................................................114 AIR BOX ADAPTOR..................................................................114 AIR BOX FILTER.......................................................................114 AIR BOX HOLDER.....................................................................114 AIR BOX HOLDER KIT...............................................................114 AIR BOX SLEEVE.....................................................................114 AIR CONNECTOR....................................................................133 AIR INTAKE - BELL.................................................................... 19 ALLEN KEY.............................................................................128 ANTENNA FOR EXTENDER - XTRA...........................................171 APRON FOR MECHANIC.......................................................... 24 ASSEMBLY TOOL....................................................................139 AXLE PUSH............................................................................128 AXLE REINFORCEMENT........................................................... 58 AXLE REINFORCEMENT TOOL.................................................. 58

BALACLAVA - ALPINESTARS................................................... 35 BALACLAVA - ROTAX............................................................... 35 BALACLAVA LARGE EYE OPENING - BOX’S............................. 35 BALACLAVA MOBCAP............................................................. 172 BALL BEARING........................................................................ 59 BALL JOINTS........................................................................... 76 BASE OF ENGINE BRACKET.................................................... 137 BATTERY................................................................... 118-119-150 BATTERY CHARGER.................................................. 118-119-150 BATTERY CONNECTOR............................................................119 BATTERY HOLDER KIT.............................................................119 BEARING CARRIAGE............................................................... 59 BEARING FOR STUB AXLE....................................................... 76 BEARINGS - WHEEL.......................................................... 53-54 BELT TENSION MEASUREMENT INSTRUMENTS....................130 BERMUDA SHORTS - SODI KART RACING............................... 26 BODYWARMER - SODI KART RACING...................................... 29 BODYWORK...................................................................38 TO 40 BOOKS...................................................................................155 BRAKE ADJUSTING SCREW.................................................... 70 BRAKE ADJUSTING SPRING.................................................... 70 BRAKE BLEEDING PUMP........................................................130 BRAKE BLEEDING SYSTEM....................................................130 BRAKE CABLE.......................................................................... 71 BRAKE CABLE SHEATH............................................................ 71 BRAKE CALIPER...................................................................... 69 BRAKE CLEANER....................................................................145 BRAKE DISK............................................................................ 66 BRAKE FLUID.........................................................................145 BRAKE KIT......................................................................... 68-69 BRAKE LINKAGE....................................................................... 71 BRAKE PADS........................................................................... 70 BRAKE PARTS................................................................68 TO 71 BRAKE VENT............................................................................ 71 BUMPER BRACKET................................................................. 40 BUTTERFLY NUT.......................................................................72

CABLE CLAMP.......................................................................... 71 CABLE GUIDE........................................................................... 71 CALIPER.................................................................................. 69 CALIPER GAUGE.....................................................................134 CAMBER PILLS........................................................................ 76 CAMERAS..............................................................................153 CAP - ROTAX........................................................................... 30 CAP - SODI KART RACING....................................................... 29 CAP COVER FOR MASTER CYLINDER...................................... 70 CAP FOR SPARK PLUGS..........................................................117 CARBURETTOR......................................................................120 CARBURETTOR CLEANER......................................................145 CARBURETTOR CONTROL TEMPLATE.................................... 137 CARBURETTOR DIAPHRAGM KIT............................................120 CARBURETTOR PRESSURE GAUGE........................................134 CARBURETTOR REPAIR KIT....................................................120 CARBURETTOR RETURN SPRING...........................................120

174

CARBURETTOR SLIDE PROTECTION......................................135 CARBURETTOR SPRING TOOL................................................135 CASE FOR REMOTE CONTROL - XTRA................................... 170 CASTER PILLS......................................................................... 76 CHAIN GREASE SPRAY...........................................................146 CHAIN GUARD......................................................................... 39 CHAIN GUARD ELASTIC........................................................... 39 CHAIN PROTECTION COVER.................................................... 63 CHAIN TOOL...........................................................................135 CHAINS..............................................................................60-61 CHARGER FOR REMOTE CONTROL - XTRA............................ 170 CHRONOMETER.....................................................................153 CLIP IGNITION SENSOR - AIM................................................152 CLIP LINK FOR CHAIN.........................................................60-61 CLUTCH CABLE.......................................................................121 CLUTCH EVER KIT................................................................... 46 CLUTCH LOCK WRENCH.........................................................135 CLUTCH PULLER.............................................................135-136 COMPRESSION SPRING.......................................................... 70 CONNECTOR FOR TANK...................................................... 73-74 COVER FOR REMOTE CONTROL - XTRA................................. 170 CRANKSHAFTS ASSEMBLY TOOL...........................................138 CROWN WHEEL CARRIER......................................................130 CYLINDER HEAD TEMPLATE................................................... 137 CYLINDER TEMPLATE............................................................. 137

DATAHUB - AIM.......................................................................151 DATAKEY - AIM........................................................................151 DIAL GAUGE...........................................................................139 DIAL GAUGE MAGNETIC SUPPORT.........................................139 DIGITAL BURETTE..................................................................138 DIGITAL BURETTE STAND.......................................................138 DISK ...................................................................................... 66 DISK CARRIER......................................................................... 67 DISK PROTECTOR.................................................................... 71 DISPOSABLE MOBCAP........................................................... 172 DOT4 .....................................................................................145 DRAIN PUMP..........................................................................130

ELASTIC SECURING STRAP FOR AIR BOX...............................114 ENGINE BRACKET.................................................................. 137 ENGINE FLIGHT CASE............................................................136 ENGINE MOUNT..................................................................... 124 ENGINE MOUNT FLANGE........................................................ 124 ENGINE SPROCKETS............................................................... 63 ENGINES.......................................................................80 TO 87 EXHAUST BRACKET...............................................................123 EXHAUST BRACKET KIT.........................................................123 EXHAUST GAS POWER VALVE SENSOR - AIM........................152 EXHAUST GAS TEMPERATURE - AIM.....................................152 EXHAUST HOLDER SPRING.................................................... 124 EXHAUST HOSE...................................................................... 124 EXHAUST INSULATING HOSE.................................................123 EXHAUST INSULATION...........................................................123 EXHAUST SILENCER.......................................................122-123 EXHAUST SILENCER RECHARGE.....................................122-123 EXHAUST SILENCER SPRING.................................................122 EXHAUST SPRING.................................................................. 124 EXHAUST VALVE TEMPLATE................................................... 137 EXTENSION WIRE - AIM.........................................................152

FASTENING COLLAR FOR WATER ...........................................113 FILLER CAP FOR TANK........................................................ 72-74 FILLER CAP GASKET.......................................................... 72-74 FILTER FOR FUEL.................................................................... 73 FIXATION TOOL SPROCKET....................................................136 FLAGS.................................................................................... 172 FLANGE FOR FRAME STIFFENER............................................ 44 FLEECE HAT - SODI KART RACING.......................................... 29 FLEECE JACKET - SODI KART RACING......................................27 FOOT PUMP............................................................................131 FRAME ALIGNMENT BENCH...................................................130 FRONT PROTECTOR................................................................ 32 FRONT WHEEL ALIGNMENT DISKS.........................................128 FUEL «Y» PIECE...................................................................... 73 FUEL FILTER............................................................................ 73 FUEL HOSE.............................................................................. 73 FUEL HOSE SECURING CLIP............................................... 73-74

FUEL JERRICANS...................................................................134 FUEL PRESSURE INDICATOR.................................................139 FUEL PUMP.............................................................................121 FUEL RECOVERY DRUM...........................................................74 FUEL RECOVERY DRUM BRACKET...........................................74 FUEL RECOVERY DRUM CAP....................................................74 FUNNEL..................................................................................134

GAS PUMP STAND.................................................................120 GAS SYPHON KIT...................................................................120 GASKET KIT FOR CARBURETTOR...........................................120 GASKET KIT FOR FUEL PUMP..................................................121 GASKET SEALING COMPOUND............................................... 147 GEAR LOCKING TOOL..............................................................135 GEAR PULLER........................................................................135 GEAR SHIFT KNOB.................................................................. 46 GLOVES - ALPINESTARS.......................................................... 15 GLOVES - BOX’S....................................................................... 14 GLUE ..................................................................................... 147 GONIOMETER.........................................................................138 GPS - AIM..............................................................................150 GREASE.................................................................................146 GRIPSTERS............................................................................. 53 GROUND SHEET..................................................................... 172 GRUB SCREWS....................................................................... 75

HAT - SODI KART RACING....................................................... 29 HEAD SUPPORT...................................................................... 34 HEAD SUPPORT COVER.......................................................... 34 HEEL RESTS.............................................................................77 HELMET BAG - ARAI................................................................ 20 HELMET BAG - BELL................................................................. 19 HELMET BAG - BOX’S............................................................... 21 HELMET BAG - SPARCO.......................................................... 22 HELMET BUCKLE - BOX’S......................................................... 21 HELMET CLEANING KIT.................................................... 22-145 HELMET DRYER....................................................................... 22 HELMET VISOR SCREW - BOX’S.............................................. 21 HELMETS - ARAI..................................................................... 20 HELMETS - BELL................................................................. 18-19 HELMETS - BOX’S.................................................................... 21 HELMETS- SHIRO..................................................................... 21 HIGH-TEMPERATURE PAINT................................................... 124 HIGH-TEMPERATURE VARNISH.............................................. 124 HONDA ENGINES...........................................................84 TO 86 HOODY SWEATER - MOJO....................................................... 30 HOOK WRENCH......................................................................128 HOOKS FOR TROLLEY............................................................. 157 HOSE CUTTING DEVICE..........................................................134 HOUR METER.........................................................................153 HUB CENTERING DEVICE.................................................. 54-55 HUB SPACER........................................................................... 57 HUB STUB............................................................................... 57 HUBS............................................................................ 54 TO 57

IAME ENGINES........................................................................ 82 IGNITION GAUGE ADAPTOR....................................................139 IGNITION PULLER...................................................................135 IGNITION TERMINAL LUGS......................................................119 INFRARED THERMOMETER.....................................................131 INSTANT GASKET................................................................... 147 IPHONE CASE - SODI KART RACING........................................ 29

JACKET - ROTAX...................................................................... 30 JACKET - SODI KART RACING...................................................27 JET GAUGE BOX.....................................................................139 JET GAUGE SET......................................................................136 JET HOLDER...........................................................................136

KART CLEANER......................................................................144 KART COVER..........................................................................155 KART TROLLEY................................................................156-157 KZ CLUTCH EVER KIT.............................................................. 46

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

LAMBDA CONTROLLER - AIM..................................................151 LAPTOP BAG - ROTAX..............................................................31 LEAD BAR............................................................................... 53 LEAD WEIGHTS......................................................................155 LIGHT BULB............................................................................134 LIGHT FOR ENGINE CHECKUP................................................134 LINKING RODS........................................................................ 76

MAGNET RING - AIM...............................................................151 MAGNETIC SENSOR - AIM......................................................152 MALLET..................................................................................138 MANOMETER..........................................................................131 MANUALS..............................................................................155 MEASURING JUG....................................................................134 MECHANICS GLOVES.............................................................. 24 MICROMETER........................................................................139 MINI-LIGHT FOR ENGINE CHECKUP.......................................134 MYCHRON EXPANSION- - AIM................................................151 MYCHRON STEERING WHEEL................................................. 46 MYCHRONS - AIM..................................................................150

NASSAU PANEL - KG............................................................... 38 NASSAU PANEL BRACKET....................................................... 38 NOTCHED BELT....................................................................... 63 NUMBER PLATES...................................................................154 NUMBERS..............................................................................154 NUTS ......................................................................53-57-75-76

OFFICIAL SODI SUIT................................................................. 10 OIL MEASURING BEAKERS.....................................................134 OILS .....................................................................................142 OPEN SOCKET.......................................................................... 71 OVERFLOW BOTTLE................................................................113

PAD SECURING SCREWS........................................................ 70 PADDOCK TENTS.................................................................... 172 PADS ...................................................................................... 70 PAINT - HIGH-TEMPERATURE................................................ 124 PAINT MARKER......................................................................132 PEDAL EXTENSION..................................................................77 PEDAL-OPERATED FRONT BRAKE KIT..................................... 68 PEDALS....................................................................................77 PISTON CIRCLIP ASSEMBLY TOOL..................................135-137 PISTON LOCKING TOOL..........................................................136 PLUG INSERT.........................................................................138 PLUGS FOR PEDAL.................................................................. 75 PLUGS FOR TUBE.................................................................... 75 PLUNGER FOR TANK........................................................... 73-74 POLO SHIRT - ROTAX...............................................................31 POLO SHIRT - SODI KART RACING.......................................... 28 POLYESTER REPAIR KIT.......................................................... 44 POSITION SENSOR - AIM........................................................151 PRESSURE GAUGE.................................................................134 PULLEY FOR WATER PUMP.....................................................113

R3 CAMBER PLATES..............................................................129 R3 FRONT LASER SYSTEM.....................................................129 R3 LASER CHAIN WHEEL ALIGNER........................................129 R3 REAR LASER SYSTEM......................................................129 RACE COLLAR......................................................................... 34 RACE NUMBERS....................................................................154 RADIATOR BRACKETS.............................................................112 RADIATOR CAP........................................................................112 RADIATORS.............................................................................112 RAIN CLOAK............................................................................ 23 RAIN GLOVES.......................................................................... 23 RAIN OVERBOOTS................................................................... 23 RAIN SUIT............................................................................... 23 RANGE EXTENDER - XTRA......................................................171 REAR AXLE PUSH...................................................................128 REAR BRAKE KIT..................................................................... 69 REAR BUMPER........................................................................ 40 REAR BUMPER BRACKET KIT.................................................. 40 ORDER ON-LINE ON WWW.ITAKASHOP.COM

REAR PROTECTION................................................................. 40 RECHARGE FOR EXHAUST SILENCER.............................122-123 REMOTE CONTROL - XTRA..................................................... 170 REPAIR KIT FOR SEAT............................................................. 44 RETROFIT KIT ISOLATING MAT...............................................123 RIBS PROTECTOR - ALPINESTARS.......................................... 33 RIBS PROTECTOR - BOX’S...................................................... 32 RIBS PROTECTOR - SPARCO................................................... 33 ROTAX ENGINES.................................................................80-81

SA ENGINES............................................................................ 87 SAFETY CABLE......................................................................... 71 SCREWS................................................................................. 75 SCREWS KIT - ARAI................................................................ 20 SCREWS KIT - BELL.................................................................18 SEAT ADJUSTMENT TOOL.......................................................130 SEAT FOAM....................................................................... 42-43 SEAT FOAM ADAPTER............................................................. 44 SEAT PADDING KIT.................................................................. 43 SEAT PROTECTION PLATES............................................... 42-43 SEAT SECURING KIT................................................................ 44 SEAT SPACERS....................................................................... 44 SEAT STIFFENER..................................................................... 44 SEATS - MEKAONE.................................................................. 42 SEATS - SODI.......................................................................... 43 SEATS - TILLETT............................................................... 42-43 SECTOR BEACON UNIT - XTRA................................................171 SECTOR SENSOR - XTRA........................................................171 SERFLEX AIR BOX CLAMP.......................................................114 SHAFTS................................................................................... 58 SHEATH STOP.......................................................................... 71 SHIM FOR STEERING WHEEL...................................................47 SHIM FOR TANK.......................................................................72 SHIMS FOR HUB...................................................................... 57 SHOES - ALPINESTARS....................................................... 16-17 SHOES - BOX’S........................................................................ 16 SHUTDOWN TRANSPONDER - XTRA.......................................171 SHUTTER BLIND FOR RADIATOR.............................................112 SIDE POD - KG......................................................................... 39 SIDE POD BRACKET................................................................ 39 SILASTIC................................................................................ 147 SILENCER........................................................................122-123 SILENCER BRACKET...............................................................123 SILENCER BRACKET KIT.........................................................123 SOCKET WRENCH..................................................................128 SPARK PLUG CAP....................................................................117 SPARK PLUG TEMPERATURE SENSOR - AIM.........................152 SPARK PLUGS...................................................................116-117 SPEED SENSOR - AIM.............................................................151 SPI SEAL OF CRANKSHAFT ASSEMBLY TOOL......................... 137 SPI SEAL WATER PUMP ASSEMBLY TOOL.............................. 137 SPLIT PIN................................................................................ 70 SPOILER - KG.......................................................................... 38 SPOILER BRACKET.................................................................. 38 SPOILER BRACKET KIT............................................................ 38 SPOILER CLAMPS................................................................... 38 SPOILER FLANGE.................................................................... 38 SPRING FOR EXHAUST SILENCER..........................................122 SPRING HOOK.................................................................135-136 SPRINKLERS HOLDER............................................................134 SPROCKET CARRIER......................................................... 64-65 SPROCKETS...................................................................... 62-63 STEERING WHEEL - MYCHRON............................................... 46 STEERING WHEEL - OPERATED FRONT BRAKE KIT................. 68 STEERING WHEEL BRACKET....................................................47 STEERING WHEEL COVER....................................................... 46 STEERING WHEEL-MOUNTED ACCELERATOR KIT................... 46 STEERING WHEEL-MOUNTED CONTROL KIT............................47 STEERING WHEELS............................................................46-47 STICKER FOR MYCHRON - AIM..............................................150 STUB AXLE RING CENTERING DEVICE...................................128 STUB AXLE SHAFT SCREW CENTERING DEVICE....................128 STUB AXLE SPACER................................................................ 57 STUB AXLES............................................................................ 76 SUITS - ALPINESTARS.............................................................. 9 SUITS - BOX’S....................................................................... 8-11 SWEAT-SHIRT - ROTAX........................................................... 30

TANK CONNECTOR............................................................. 73-74 TANK FILLER CAP............................................................... 72-74

CONTACT THE NEAREST ITAKASHOP STORE

TANK LEVEL MEASURING TOOL..............................................135 TANK PLATE.............................................................................72 TANK PLUNGER.................................................................. 73-74 TANK PROTECTOR................................................................... 73 TANKS................................................................................ 72-74 TAPE ..................................................................................... 147 TEAR OFFS - ARAI................................................................... 20 TEAR OFFS - BELL....................................................................18 TEE SHIRT - MOJO................................................................... 30 TEE SHIRT - ROTAX..................................................................31 TEE SHIRT- SODI KART RACING.............................................. 26 TEFLON SEAT SPACERS.......................................................... 44 TENTS.................................................................................... 172 THERMOMETER...............................................................131-153 TIE RODS................................................................................. 76 TIN WIRE................................................................................ 137 TM ENGINES........................................................................... 83 TOP - ALPINESTARS................................................................ 35 TOP SPOILER - BELL................................................................ 19 TOP WING - ARAI.................................................................... 20 TRACK PROTECTION.............................................................. 172 TRACKSIDE TABLE.................................................................156 TRANSMISSIONS..........................................................60 TO 65 TRANSPONDER BUNDLE - XTRA.............................................171 TRAVEL ROLLER BAG - ROTAX.................................................31 TROLLEY.........................................................................156-157 TROLLEY BAG - SODI KART RACING........................................ 28 TROLLEY CASE - ROTAX...........................................................31 TROLLEY WHEEL.................................................................... 157 TROUSERS - SODI KART RACING.............................................27 TURBO VISOR.......................................................................... 23 TYRE GREASE........................................................................132 TYRE IRON.............................................................................132 TYRE MACHINE......................................................................133 TYRE MEASURING TAPE........................................................133 TYRE PRESSURE GAUGE........................................................131 TYRE STACK...........................................................................155 TYRES........................................................................ 160 TO 167 TYRES BAG............................................................................155

UMBRELLA - SODI KART RACING............................................ 26 UNDERWEAR.......................................................................... 35

VALVE...................................................................................... 53 VALVE CORE REMOVER..........................................................133 VALVE SPRING MOUTING TOOL.......................................136-137 VALVE TOOL............................................................................133 VARNISH- HIGH-TEMPERATURE............................................ 124 VERTICAL KART STOWAGE.....................................................156 VISOR CLEANER............................................................... 22-145 VISOR FASTENING KIT - BOX’S................................................ 21 VISORS - ARAI........................................................................ 20 VISORS - BELL.................................................................... 18-19 VISORS - BOX’S....................................................................... 21

WASHERS............................................................................... 75 WATER HOSE..........................................................................113 WATER HOSE SLEEVE.............................................................113 WATER PUMP..........................................................................113 WATER PUMP BELT.................................................................113 WATER PUMP BRACKET..........................................................113 WATER SYPHON KIT................................................................113 WATER TEMPERATURE SENSOR - AIM..................................152 WATER TEMPERATURE SENSOR SLEEVE - AIM.....................152 WATER TEMPERATURE THERMOMETER................................153 WD40....................................................................................144 WEIGHTS...............................................................................155 WHEEL BEARING..................................................................... 53 WHEEL RIMS.................................................................48 TO 52 WHEELS EQUALIZER..............................................................132 WINDBREAKER JACKET - SODI KART RACING........................ 28 WINTER JACKET - ROTAX........................................................ 30 WOODRUFF KEYS.................................................................... 58 WRENCH................................................................................128 WRENCH ADAPTER................................................................136

«Y» PIECE............................................................................... 73

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

175

GENERAL TERMS AND CONDITIONS FOR ITAKASHOP SALES

Article 1: DESIGNATION Hereinafter: The term “vendor” designates ITAKAshop, the trade name of SODIKART company, Parc d’activités des hauts de Couëron - BP 60 - 44220 COUËRON - France. The term “purchaser” designates the vendor’s customer, either a professional or a private individual. Article 2: SCOPE - INFORMATION - AGREEMENT The General Terms and Conditions of Sale (GT&C) described herein, except for Article 10 which is reserved for private individuals, apply to all purchasers and are relevant for all the vendor’s products. Their existence is drawn to the purchaser’s attention in the various sales documents, catalogues and brochures; they can also be found on the vendor’s website (www.itakashop.com). The fact of placing an order with the vendor means that the purchaser understands and unreservedly agrees to the GT&C. A purchaser cannot claim that the fact that the vendor does not refer to the GT&C in a particular document means that the vendor foregoes any of the rights he claims under the said GT&C. The vendor reserves the right to modify the GT&C at any time. In such cases, the GT&C applicable to the purchaser are those in force on the date the order is placed. Article 3: SPECIAL CONDITIONS The special conditions granted to the purchaser only apply if they have been the subject of a prior written agreement by the vendor. Only the points specifically mentioned in the said prior agreement constitute a waiver of the GT&C which, in all other respects, applies in full. Article 4: DEFINITION, USE AND AVAILABILITY OF THE PRODUCTS The products proposed are described as clearly and accurately as possible. It is the purchaser’s responsibility to request any additional information required to check that the product matches the purchaser’s requirements. Photos, irrespective of their support, are not contractually binding. The products are designed and manufactured in accordance with current professional standards. It is the purchaser’s responsibility to check that their use is the one for which they are designed. The vendor reserves the right, at any time, to withdraw or modify a product, without prior notice .Article 5: PRICES Unless otherwise specified in writing, the prices shown are those of the price list in force on the date the order is placed. These prices may be modified without prior notice. In accordance with current legislation, they may be revised and the products invoiced at their value on the date of shipping. The prices in the catalogue are ex works, inclusive of VAT, excluding packaging and delivery charges. Article 6: PAYMENT Unless specifically agreed in writing by the vendor, the payment is understood to be a net, discount-free, cash payment, irrespective of the method of delivery. The terms of payment may not be modified, even in the event of a claim, without the vendor’s written approval. In the event of payment by cheque, payment is not considered to be made until the cheque has been cleared on the agreed date. Cash On Delivery payments are made by cheque made payable to the vendor (ITAKAshop), either paid at the post office or handed to the deliveryman. Payments by credit card are made by entering the card number of the purchaser, whose account is debited, in his currency at the rate of exchange in force in his bank. The vendor is credited in EUROS. There will be no discounts for cash payment or early payment. In

176

case of late payment, the rate of interest will be restricted to three times the French legal rate of interest, and there will be a lump-sum compensation of 40 Euros for collection charges. In the event of downgrading of the purchaser’s credit, the vendor reserves the right to modify the terms of payment, require guarantees or a cash payment, before processing the order. Gift vouchers distributed during competitions cannot be used in conjunction with any other gift voucher and are only valid for private account. Gift vouchers distributed during National Series Karting (NSK) and Rotax Max-Challenge are limited to a single voucher per order. Gift vouchers distributed during FFSA events are limited to a single voucher per account. Article 7: DATA CONTAINING NAMES (Internet site) The vendor reserves the right to collect data concerning the purchaser, particularly by the use of cookies. The collection of data by the vendor, who is responsible for its processing, is necessary in order to take the purchaser’s requirements into account. By indicating his e-mail address to the vendor, the purchaser can receive a confirmation of his order. Depending on the choices made at the time of creating or consulting his account, the user will be able to receive the vendor’s offers. It is the vendor’s responsibility to ensure that all data that is personal in nature that he receives are correct and up-to-date, which is why, in accordance with the law relating to protection of persons when processing personnel data (Article 32 of Law N°2004-801 dated 6 August 2004), the purchaser has a right to access, modify and delete all information concerning him, and to exercise the said right at any time by contacting the vendor in writing, indicating his surname, first name, e-mail address and, if possible, his customer reference. The purchaser is informed that this automated data processing is the subject of a declaration to the CNIL. In addition, the vendor will do all within his power to ensure the confidentiality and security of the data transmitted on his website (www.itakashop.com). To this end, the internet site uses an SSL type secure payment protocol (Secure Sockets Layer). Article 8: DELIVERY The delivery cannot take place if the purchaser has not fulfilled his obligations vis-a vis the vendor. The vendor undertakes to deliver the goods in accordance with the order, subject to them being available and not having been modified or deleted in accordance with Article 4. Should a product or products not be available, the vendor may proceed with a partial delivery and, having informed the purchaser, may supply products of an equivalent price and quality. A delay in delivery cannot give rise to any form of indemnity or to the cancellation of the order. The inherent risks of shipment are the purchaser’s responsibility. In the event of damage, it is up to the purchaser to make a note to that effect on the delivery note, to issue the corresponding reservations in accordance with the provisions of the French commercial code (Art 105), and to inform the vendor within a maximum of two days from the moment of delivery. Article 9: RECEPTION The non-conformity or visible defects of the products must be declared by the purchaser to the vendor within two days of receiving the goods. The corresponding evidence must be forwarded. No returns may be made until agreed by the vendor. They must be made within a maximum of 15 days of receipt of the goods. If, after receipt and inspection of the goods, the vendor confirms that they are indeed noncompliant, they will be exchanged or a credit note will be established. Goods returned to the vendor must not have been used, must be in their original packaging and must be accompanied by the original delivery note.

The return transport of the goods and the associated risks are the purchaser’s responsibility. Any minor nonconformities and modifications that the vendor makes to his products (Article 4) cannot give rise to a credit note. Article 10: RIGHT OF RETRACTION (for private individuals only, this does not apply to professional customers) The purchaser has the right to retract within 14 days and to return any items that do not suit him. he may benefit from a credit note to the same value or be refunded within 14 days of the date on which he exercised his right of retraction. Goods returned to the vendor must not have been used, must be in their original packaging and must be accompanied by the original delivery note. The transportation costs back shall be borne by the purchaser. This right of withdrawal does not apply to personalized products or those specific to the purchaser. Article 11: INTELLECTUAL PROPERTY All elements of catalogue and website www.ITAKAshop.com (general structure, texts, photos, images whether animated or not, knowhow) are and remain the exclusive intellectual property of vendor. Nobody is allowed to reproduce, use, rebroadcast, or use for any reason whatsoever, even partially, elements of catalogue and website whether software, visual or audio. Every single link or hypertext is strictly prohibited without express written consent of vendor. Article 12: RETENTION OF OWNERSHIP The transfer of ownership of items sold is subject to the effective and full payment by the purchaser, within the laid down timescale, of both the principal and the additional costs. Any default in payment gives the vendor the right, should he so wish, to take back the goods or to terminate the contract. If the items supplied have been transformed or integrated into other items, the latter become the vendor’s property as a security until the price has been paid in full. Article 13: RESPONSIBILITY The vendor cannot be held responsible for any inappropriate or abnormal use of the product. In accordance with the provisions of the law, in view of their use, competition products cannot give rise to any guarantee or the payment of any damages. Article 14: FORCE MAJEURE The vendor cannot be held responsible in the event of a delay in the execution or a failure to execute his obligations due to unforseen circumstances or events that are beyond his control, in particular natural events, events or acts of governemental or public authorities, labour disputes, fires, or the non-arrival of supplies . Article 15: DIVISIBILITY If any of the present conditions was to be considered as null and void, illegal or impossible to enforce, this fact shall in no way affect the validity or legal or enforcable nature of the other provisions. Article 16: DISPUTES - APPLICABLE LAW - COMPETENT COURT In the event of a dispute, the competent court is the “tribunal de commerce de Nantes” (Nantes commercial court), to hear all litigation that may result from the present conditions. In the event of a dispute with a foreign individual or body corporate, the applicable law is French law.

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. VISIT OUR WEBSITE FOR CURRENT PRICES: WWW.ITAKASHOP.COM

NEED SOME HELP ? +33 (0)2 40 38 26 20

CONTACT THE NEAREST ITAKASHOP STORE

SHIPMENTS WITHIN 24H GRAPHIC DESIGN:

ORDER ON-LINE ON WWW.ITAKASHOP.COM

ITAKASHOP - ZA LES HAUTS DE COUËRON - BP 60 - 44220 COUËRON - FRANCE