3061 Series

3 Flute Router For Stainless Steel

Description

3 Flute Solid Carbide, upward spiral with corner chamfer for extra strength, 30° helix. Manufactured from Ultra Micrograin Carbide, TiAIN coated to give extra wear resistance.

Application

Designed for use on stainless & other steels commonly used in the sign making industry. The special substrate, combined with the hard and lubricious surface coating, gives unbeatable performance.

Metric Sizes (mm)

General Instructions For Routing Stainless Steel

Run Machine @ 4000 RPM

Feed @ 2-3 mm/sec

Plunge @ 1/2 of feed rate

• Ensure the cutter is all the way through the material before you start traversing.

• Use a sacrificial bed of foamex.

• Glue your stainless steel workpiece to the foamex, you will then remove the foamex when the job is complete. (Spray carpet glue is ideal)

• It is imperative that your material is rigid and firmly stuck down.

• Use plenty of coolant.

Any questions, please do not hesitate to contact us on the number below, alternatively ring Sally on + 44 (0) 1204 303435.

164-27

Series

Description

2 flute, solid carbide, standard length, square end, 30° helix, upward spiral.

Application

Designed for precision machining in applications where a particularly small tool is required. The common shank size provides rigidity and the flute design gives sufficient swarf clearance for slotting applications.

Metric Sizes (mm)

Tech Tip ITC can manufacture special styles of tools not shown in this brochure - often in only a few days.