A-12-02996EN_me_WIDIA_SlimLine_Covers:SlimLine_Covers
10/15/12
10:44 AM
Page 1
WIDIA™ Slim Line ITC Ltd Cyber House, 1 Kepler, Lichfield Road Industrial Est, Tamworth B79 7XE Telephone: +44 (0) 1827 304500 Fax: +44 (0) 1827 304501 E-mail: sales@itc-ltd.co.uk
Distributed by:
WIDIA™ Slim Line ©2012 Kennametal Inc. All rights reserved. A-12-02996EN_me
Distributed by:
WWW.WIDIA.COM
A-12-02996EN_me_WIDIA_SlimLine_Covers:SlimLine_Covers
10/15/12
10:44 AM
Page 2
Metalcutting Safety IMPORTANT SAFETY INSTRUCTIONS Read before using the tools in this catalogue! Projectile and Fragmentation Hazards Modern metalcutting operations involve high spindle and cutter speeds and high temperatures and cutting forces. Hot metal chips may fly off the workpiece during metalcutting. Although cutting tools are designed and manufactured to withstand high cutting forces and temperatures, they can sometimes fragment, particularly if they are subjected to over-stress, severe impact, or other abuse. To avoid injury: • Always wear appropriate personal protective equipment, including safety goggles, when operating metalcutting machines or working nearby. • Always make sure all machine guards are in place.
Breathing and Skin Contact Hazards: Grinding carbide or other advanced cutting tool materials produce dust or mist containing metallic particles. Breathing this dust or mist — especially over an extended period — can cause temporary or permanent lung disease or make existing medical conditions worse. Contact with this dust or mist can irritate eyes, skin, and mucous membranes and may make existing skin conditions worse. To avoid injury: • Always wear breathing protection and safety goggles when grinding. • Provide ventilation control and collect and properly dispose of dust, mist, or sludge from grinding. • Avoid skin contact with dust or mist. For more information, read the applicable Material Safety Data Sheet provided by Kennametal and consult General Industry Safety and Health Regulations, Part 1910, Title 29 of the Code of Federal Regulations. These safety instructions are general guidelines. Many variables affect machining operations. It is impossible to cover every specific situation. The technical information included in this catalogue and recommendations on machining practices may not apply to your particular operation. For more information, consult Kennametal’s Metalcutting Safety booklet, available free from Kennametal at 724.539.5747 or fax 724.539.5439. For specific product safety and environmental questions, contact our Corporate Environmental Health and Safety Office at 724.539.5066 or fax 724.539.5372.
WIDIA, AluSurf, KM, NINA, Rübig, Top Drill S, VariDrill, VariMill, and WU25PD are trademarks of Kennametal, Inc. and are used as such herein. The absence of a product, service name, or logo from this list does not constitute a waiver of Kennametal’s trademark or other intellectual property rights concerning that name or logo. Weldon® is a registered trademark of Weldon Tool Company. ©Copyright 2012 by Kennametal Inc., Latrobe, PA 15650. All rights reserved.
A-12-02996EN_me_WIDIA_SlimLine_Catalog.qxp:WIDIA
10/15/12
10:36 AM
Page 1
WIDIA™ Slim Line High-Performance Solid Carbide End Mills VariMill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2–3,8 Roughing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Finishing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9–10 Aluminium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 General Purpose+ Solid Carbide End Mills • Roughing/Finishing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–6, 11 General Purpose HSS-E End Mills • Roughing/Finishing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 VariDrill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14–34 3 x D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16–21 5 x D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22–27 8 x D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28–33 Speed and Feed Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 Informational Icon Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
1
A-12-02996EN_me_WIDIA_SlimLine_Catalog.qxp:WIDIA
10/15/12
10:36 AM
Page 2
High-Performance Solid Carbide End Mills • VariMill List 4777 • VariMill • Unequal flute spacing. • Center cutting.
P TiAlN
1
2
3
䢇
䢇
䢇
P - Steels M - Stainless Steels
D1 4,0 5,0 6,0 8,0 10,0 12,0 16,0 20,0
length of cut Ap1 max 12,00 13,00 13,00 16,00 22,00 26,00 32,00 38,00
D 6 6 6 8 10 12 16 20
length L 55 57 57 63 72 83 92 104
4
5
6
1
M 2 3
1
䢇
䢇
䢇
䢇
䢇
䢇
䢇
K - Cast Iron N - Non-Ferrous
BCH 0,40 0,40 0,40 0,40 0,50 0,50 0,50 0,50
K 2 3
1
2
3
4
H 1
䢇
䢇
䢇
䢇
䢇
䢇
䢇
S
S - High-Temp Alloys H - Hard Materials
TiAIN - LT 477704002LT 477705002LT 477706002LT 477708003LT 477710004LT 477712005LT 477716006LT 477720007LT
£ 14.30 14.70 15.40 22.50 31.70 40.60 65.50 102.30
List 4777 • VariMill
A
Group P1 P2 P3 P4 P5 P6 M1 M2 M3 K1 K2 K3 S1 S2 S3 S4 H1
ap 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D
ae 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,3 x D 0,3 x D 0,5 x D 0,5 x D 0,5 x D
B
TiAlN
ap 1xD 1xD 1xD 0,75 x D 1xD 0,75 x D 1xD 1xD 1xD 1xD 1xD 1xD 0,3 x D 0,3 x D 1xD 1xD 0,75 x D
Cutting Speed Vc m/min Min Max 150 200 140 190 120 160 90 150 60 100 50 75 90 115 60 80 60 70 120 150 110 130 100 130 50 90 25 40 60 80 50 60 80 140
Recommended Feed per Tooth (Fz=mm/th) for Side Milling (A). For Slotting (B), reduce Fz by 20%. D1 - Diameter mm Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz
4,0 0,028 0,028 0,023 0,021 0,019 0,016 0,023 0,019 0,016 0,028 0,023 0,019 0,023 0,013 0,019 0,016 0,021
6,0 0,044 0,044 0,036 0,033 0,029 0,025 0,036 0,029 0,025 0,044 0,036 0,029 0,036 0,019 0,029 0,026 0,033
8,0 0,060 0,060 0,050 0,045 0,040 0,034 0,050 0,040 0,034 0,060 0,050 0,040 0,050 0,026 0,040 0,037 0,045
10,0 0,072 0,072 0,061 0,054 0,048 0,040 0,061 0,048 0,040 0,072 0,061 0,048 0,061 0,032 0,048 0,045 0,054
12,0 0,083 0,083 0,070 0,062 0,056 0,047 0,070 0,056 0,047 0,083 0,070 0,056 0,070 0,037 0,056 0,052 0,062
16,0 0,101 0,101 0,087 0,077 0,070 0,057 0,087 0,070 0,057 0,101 0,087 0,070 0,087 0,046 0,070 0,064 0,077
20,0 0,114 0,114 0,101 0,088 0,081 0,065 0,101 0,081 0,065 0,114 0,101 0,081 0,101 0,054 0,081 0,074 0,088
Lower value of cutting speed is used for high-stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group. Above parameters are based on ideal conditions. For smaller taper machining centers, please adjust parameters accordingly on diameters greater than 12mm.
2
WWW.WIDIA.COM
A-12-02996EN_me_WIDIA_SlimLine_Catalog.qxp:WIDIA
10/15/12
10:36 AM
Page 3
High-Performance Solid Carbide End Mills • VariMill™ List 4778 • VariMill • Unequal flute spacing. • Center cutting.
P AlTiN
5
6
2
S 3 4
䢇
䢇
䢇
䢇
P - Steels M - Stainless Steels
D1 4,0 5,0 6,0 8,0 10,0 12,0 16,0 20,0
length of cut Ap1 max 12,00 13,00 13,00 16,00 22,00 26,00 32,00 38,00
D 6 6 6 8 10 12 16 20
length L 55 57 57 63 72 83 92 104
䢇
K - Cast Iron N - Non-Ferrous
Rεε 0,20 0,20 0,20 0,20 0,30 0,30 0,30 0,30
S - High-Temp Alloys H - Hard Materials
AlTiN - MT 477804002MT 477805002MT 477806002MT 477808003MT 477810004MT 477812005MT 477816006MT 477820007MT
£ 15.87 16.05 17.18 25.70 34.35 44.07 73.65 105.71
List 4778 • VariMill
A
Group P5 P6 S2 S3 S4
ap 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D
ae 0,5 x D 0,5 x D 0,3 x D 0,5 x D 0,5 x D
B
AlTiN
ap 1xD 0,75 x D 0,3 x D 1xD 1xD
Cutting Speed Vc m/min Min Max 60 100 50 75 25 40 60 80 50 60
Recommended Feed per Tooth (Fz=mm/th) for Side Milling (A). For Slotting (B), reduce Fz by 20%. D1 - Diameter mm Fz Fz Fz Fz Fz
4,0 0,019 0,016 0,013 0,019 0,016
6,0 0,029 0,025 0,019 0,029 0,026
8,0 0,040 0,034 0,026 0,040 0,037
10,0 0,048 0,040 0,032 0,048 0,045
12,0 0,056 0,047 0,037 0,056 0,052
16,0 0,070 0,057 0,046 0,070 0,064
20,0 0,081 0,065 0,054 0,081 0,074
Lower value of cutting speed is used for high-stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group. Above parameters are based on ideal conditions. For smaller taper machining centers, please adjust parameters accordingly on diameters greater than 12mm.
WWW.WIDIA.COM
3
A-12-02996EN_me_WIDIA_SlimLine_Catalog.qxp:WIDIA
10/15/12
12:19 PM
Page 4
General Purpose+ Solid Carbide End Mills • Roughing/Finishing List 4002 • Center cutting.
P TiAlN
1
2
3
4
1
2
1
2
N 5
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
P - Steels M - Stainless Steels
D1 3,0 4,0 5,0 6,0 8,0 10,0 12,0 16,0 20,0
length of cut Ap1 max 9,50 12,00 14,00 16,00 20,00 22,00 25,00 32,00 38,00
D 3 4 6 6 8 10 12 16 20
length L 38 50 50 50 63 76 76 89 104
M
K
K - Cast Iron N - Non-Ferrous
S - High-Temp Alloys H - Hard Materials
TiAlN - RT 400203000RT 400204001RT 400205002RT 400206002RT 400206003RT 400210004RT 400212005RT 400216006RT 400220007RT
£ 8.65 9.66 12.77 12.77 16.04 21.68 26.03 51.29 74.10
List 4002
A
B
Recommended Feed per Tooth (Fz=mm/th) for Side Milling (A). For Slotting (B), reduce Fz by 20%.
TiAlN Cutting Speed Vc m/min
Group P1 P2 P3 P4 M1 M2 K1 K2 N5
ap 1,25 x D 1,25 x D 1,25 x D 1,25 x D 1,25 x D 1,25 x D 1,25 x D 1,25 x D 1,25 x D
ae 0,1 x D 0,1 x D 0,1 x D 0,1 x D 0,1 x D 0,1 x D 0,1 x D 0,1 x D 0,1 x D
ap 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D
Min 150 140 120 90 90 60 120 110 250
-
D1 - Diameter Max 200 190 160 150 115 80 150 130 750
mm Fz Fz Fz Fz Fz Fz Fz Fz Fz
4,0 0,028 0,028 0,023 0,021 0,023 0,019 0,028 0,023 0,036
6,0 0,044 0,044 0,036 0,033 0,036 0,029 0,044 0,036 0,054
8,0 0,060 0,060 0,050 0,045 0,050 0,040 0,060 0,050 0,072
10,0 0,072 0,072 0,061 0,054 0,061 0,048 0,072 0,061 0,090
12,0 0,083 0,083 0,070 0,062 0,070 0,056 0,083 0,070 0,108
16,0 0,101 0,101 0,087 0,077 0,087 0,070 0,101 0,087 0,144
20,0 0,114 0,114 0,101 0,088 0,101 0,081 0,114 0,101 0,180
Lower value of cutting speed is used for high-stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group. Above parameters are based on ideal conditions. For smaller taper machining centers, please adjust parameters accordingly on diameters greater than 12mm.
4
WWW.WIDIA.COM
A-12-02996EN_me_WIDIA_SlimLine_Catalog.qxp:WIDIA
10/15/12
10:36 AM
Page 5
General Purpose+ Solid Carbide End Mills • Roughing/Finishing List 4003 • Center cutting.
P TiAlN
1
2
3
4
1
2
1
N 2 5
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
P - Steels M - Stainless Steels
D1 3,0 4,0 5,0 6,0 8,0 10,0 12,0 16,0 20,0
length of cut Ap1 max 9,50 12,00 14,00 16,00 20,00 22,00 25,00 32,00 38,00
D 3 4 6 6 8 10 12 16 20
M
K
䢇
K - Cast Iron N - Non-Ferrous
length L 38 50 50 50 63 76 76 89 104
S - High-Temp Alloys H - Hard Materials
TiAlN - RT 400303000RT 400304001RT 400305002RT 400306002RT 400308003RT 400310004RT 400312005RT 400316006RT 400320007RT
£ 8.65 9.66 12.77 12.77 16.04 21.68 26.03 51.29 74.10
List 4003
A
B
Recommended Feed per Tooth (Fz=mm/th) for Side Milling (A). For Slotting (B), reduce Fz by 20%.
TiAlN Cutting Speed Vc m/min
Group P1 P2 P3 P4 M1 M2 K1 K2 N5
ap 0,75 x D 0,75 x D 0,75 x D 0,75 x D 0,75 x D 0,75 x D 0,75 x D 0,75 x D 0,75 x D
ae 0,1 x D 0,1 x D 0,1 x D 0,1 x D 0,1 x D 0,1 x D 0,1 x D 0,1 x D 0,1 x D
ap 0,25 x D 0,25 x D 0,25 x D 0,25 x D 0,25 x D 0,25 x D 0,25 x D 0,25 x D 0,25 x D
Min 150 140 120 90 90 60 120 110 250
-
D1 - Diameter Max 200 190 160 150 115 80 150 130 750
mm Fz Fz Fz Fz Fz Fz Fz Fz Fz
4,0 0,033 0,033 0,027 0,025 0,027 0,022 0,033 0,027 0,041
6,0 0,050 0,050 0,042 0,038 0,042 0,034 0,050 0,042 0,062
8,0 0,069 0,069 0,058 0,052 0,058 0,046 0,069 0,058 0,083
10,0 0,083 0,083 0,070 0,062 0,070 0,056 0,083 0,070 0,104
12,0 0,095 0,095 0,081 0,072 0,081 0,065 0,095 0,081 0,124
16,0 0,116 0,116 0,100 0,088 0,100 0,080 0,116 0,100 0,166
20,0 0,131 0,131 0,116 0,101 0,116 0,093 0,131 0,116 0,207
Lower value of cutting speed is used for high-stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group. Above parameters are based on ideal conditions. For smaller taper machining centers, please adjust parameters accordingly on diameters greater than 12mm.
WWW.WIDIA.COM
5
A-12-02996EN_me_WIDIA_SlimLine_Catalog.qxp:WIDIA
10/15/12
10:36 AM
Page 6
General Purpose+ Solid Carbide End Mills • Roughing/Finishing List 4004 • Center cutting.
P TiAlN
M
2
3
4
1
2
1
2
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
P - Steels M - Stainless Steels
D1 3,0 4,0 5,0 6,0 8,0 10,0 12,0 16,0 20,0
length of cut Ap1 max 9,50 12,00 14,00 16,00 20,00 22,00 25,00 32,00 38,00
D 3 4 5 6 8 10 12 16 20
K
1
K - Cast Iron N - Non-Ferrous
length L 38 50 50 50 63 76 76 89 104
S - High-Temp Alloys H - Hard Materials
TiAlN - RT 400403000RT 400404001RT 400405001RT 400406002RT 400408003RT 400410004RT 400412005RT 400416006RT 400420007RT
£ 8.65 9.66 12.77 12.77 16.04 21.68 26.03 51.29 74.10
List 4004
A
Group P1 P2 P3 P4 M1 M2 K1 K2
ap 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D
ae 0,1 x D 0,1 x D 0,1 x D 0,1 x D 0,1 x D 0,1 x D 0,1 x D 0,1 x D
B
TiAlN
ap 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D
Cutting Speed Vc m/min Min Max 150 200 140 190 120 160 90 150 90 115 60 80 120 150 110 130
Recommended Feed per Tooth (Fz=mm/th) for Side Milling (A). For Slotting (B), reduce Fz by 20%. D1 - Diameter mm Fz Fz Fz Fz Fz Fz Fz Fz
3,0 0,024 0,024 0,020 0,018 0,020 0,016 0,024 0,020
4,0 0,033 0,033 0,027 0,025 0,027 0,022 0,033 0,027
6,0 0,050 0,050 0,042 0,038 0,042 0,034 0,050 0,042
8,0 0,069 0,069 0,058 0,052 0,058 0,046 0,069 0,058
10,0 0,083 0,083 0,070 0,062 0,070 0,056 0,083 0,070
12,0 0,095 0,095 0,081 0,072 0,081 0,065 0,095 0,081
16,0 0,116 0,116 0,100 0,088 0,100 0,080 0,116 0,100
20,0 0,131 0,131 0,116 0,101 0,116 0,093 0,131 0,116
Lower value of cutting speed is used for high-stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group. Above parameters are based on ideal conditions. For smaller taper machining centers, please adjust parameters accordingly on diameters greater than 12mm.
6
WWW.WIDIA.COM
A-12-02996EN_me_WIDIA_SlimLine_Catalog.qxp:WIDIA
10/15/12
10:36 AM
Page 7
High-Performance Solid Carbide End Mills • Roughing List 4976 • Center cutting. • Flat shallow pitch.
P AlTiN
1
2
3
4
5
6
1
M 2 3
1
K 2 3
1
2
3
4
H 1
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
P - Steels M - Stainless Steels
D1 4,0 5,0 6,0 8,0 10,0 12,0 16,0 20,0
length of cut Ap1 max 8,00 13,00 13,00 16,00 22,00 26,00 32,00 38,00
D 6 6 6 8 10 12 16 20
length L 57 57 57 63 72 83 92 104
BCH 0,25 0,25 0,25 0,25 0,25 0,35 0,35 0,35
䢇
K - Cast Iron N - Non-Ferrous
ZU 3 3 3 3 4 4 4 4
䢇
S
S - High-Temp Alloys H - Hard Materials
AlTiN - MT 497604002MT 497605002MT 497606002MT 497608003MT 497610004MT 497612005MT 497616006MT 497620007MT
£ 37.02 37.02 37.02 41.50 52.46 61.09 100.60 150.23
List 4976
A
Group P1 P2 P3 P4 P5 P6 M1 M2 M3 K1 K2 K3 S1 S2 S3 S4 H1
ap 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D
ae 0,4 x D 0,4 x D 0,4 x D 0,3 x D 0,4 x D 0,3 x D 0,4 x D 0,4 x D 0,4 x D 0,4 x D 0,4 x D 0,4 x D 0,3 x D 0,3 x D 0,4 x D 0,3 x D 0,3 x D
B
AlTiN
ap 1xD 1xD 0,75 x D 0,3 x D 0,75 x D 0,3 x D 0,75 x D 0,75 x D 0,75 x D 1xD 1xD 1xD 0,75 x D 0,3 x D 0,75 x D 0,75 x D 0,3 x D
Cutting Speed Vc m/min Min Max 150 200 140 190 120 160 90 150 60 100 50 75 80 100 60 80 60 80 120 160 110 140 100 130 90 115 20 40 50 80 45 65 100 140
Recommended Feed per Tooth (Fz=mm/th) for Side Milling (A). For Slotting (B), reduce Fz by 20%. D1 - Diameter mm Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz
4,0 0,028 0,028 0,023 0,021 0,019 0,016 0,023 0,019 0,016 0,028 0,023 0,019 0,023 0,013 0,019 0,016 0,021
5,0 0,036 0,036 0,030 0,027 0,024 0,020 0,030 0,024 0,020 0,036 0,030 0,024 0,030 0,016 0,024 0,021 0,027
6,0 0,044 0,044 0,036 0,033 0,029 0,025 0,036 0,029 0,025 0,044 0,036 0,029 0,036 0,019 0,029 0,026 0,033
8,0 0,060 0,060 0,050 0,045 0,040 0,034 0,050 0,040 0,034 0,060 0,050 0,040 0,050 0,026 0,040 0,037 0,045
10,0 0,072 0,072 0,061 0,054 0,048 0,040 0,061 0,048 0,040 0,072 0,061 0,048 0,061 0,032 0,048 0,045 0,054
12,0 0,083 0,083 0,070 0,062 0,056 0,047 0,070 0,056 0,047 0,083 0,070 0,056 0,070 0,037 0,056 0,052 0,062
16,0 0,101 0,101 0,087 0,077 0,070 0,057 0,087 0,070 0,057 0,101 0,087 0,070 0,087 0,046 0,070 0,064 0,077
20,0 0,114 0,114 0,101 0,088 0,081 0,065 0,101 0,081 0,065 0,114 0,101 0,081 0,101 0,054 0,081 0,074 0,088
Lower value of cutting speed is used for high-stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group. Above parameters are based on ideal conditions. For smaller taper machining centers, please adjust parameters accordingly on diameters greater than 12mm.
WWW.WIDIA.COM
7
A-12-02996EN_me_WIDIA_SlimLine_Catalog.qxp:WIDIA
10/15/12
10:36 AM
Page 8
High-Performance Solid Carbide End Mills • VariMill™ List 47N0 • VariMill • Unequal flute spacing. • Center cutting.
P TiAlN
1
2
3
4
5
6
1
M 2 3
1
K 2 3
1
2
3
4
H 1
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
P - Steels M - Stainless Steels
䢇
K - Cast Iron N - Non-Ferrous
䢇
S
S - High-Temp Alloys H - Hard Materials
D1 5,0 6,0
D 6 6
length of cut Ap1 max 9,00 10,00
L3 15,00 15,00
length L 57 57
D3 4,70 5,64
TiAlN - LT 47N005002LT 47N006002LT
£ 17.96 18.86
8,0 10,0
8 10
12,00 14,00
20,00 25,00
63 72
7,52 9,40
47N008003LT 47N010004LT
28.45 39.01
12,0 16,0
12 16
16,00 22,00
30,00 38,00
83 92
11,28 15,04
47N012005LT 47N016006LT
49.63 81.84
20,0
20
26,00
50,00
104
18,80
47N020007LT
124.00
List 47N0 • VariMill
A
Group P1 P2 P3 P4 P5 P6 M1 M2 M3 K1 K2 K3 S1 S2 S3 S4 H1
ap 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D
ae 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,3 x D 0,3 x D 0,5 x D 0,5 x D 0,5 x D
B
TiAlN
ap 1xD 1xD 1xD 0,75 x D 1xD 0,75 x D 1xD 1xD 1xD 1xD 1xD 1xD 0,3 x D 0,3 x D 1xD 1xD 0,75 x D
Cutting Speed Vc m/min Min Max 150 200 140 190 120 160 90 150 60 100 50 75 90 115 60 80 60 70 120 150 110 130 100 130 50 90 25 40 60 80 50 60 80 140
Recommended Feed per Tooth (Fz=mm/th) for Side Milling (A). For Slotting (B), reduce Fz by 20%. D1 - Diameter mm Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz
5,0 0,036 0,036 0,030 0,027 0,024 0,020 0,030 0,024 0,020 0,036 0,030 0,024 0,030 0,016 0,024 0,021 0,027
6,0 0,044 0,044 0,036 0,033 0,029 0,025 0,036 0,029 0,025 0,044 0,036 0,029 0,036 0,019 0,029 0,026 0,033
8,0 0,060 0,060 0,050 0,045 0,040 0,034 0,050 0,040 0,034 0,060 0,050 0,040 0,050 0,026 0,040 0,037 0,045
10,0 0,072 0,072 0,061 0,054 0,048 0,040 0,061 0,048 0,040 0,072 0,061 0,048 0,061 0,032 0,048 0,045 0,054
12,0 0,083 0,083 0,070 0,062 0,056 0,047 0,070 0,056 0,047 0,083 0,070 0,056 0,070 0,037 0,056 0,052 0,062
16,0 0,101 0,101 0,087 0,077 0,070 0,057 0,087 0,070 0,057 0,101 0,087 0,070 0,087 0,046 0,070 0,064 0,077
20,0 0,114 0,114 0,101 0,088 0,081 0,065 0,101 0,081 0,065 0,114 0,101 0,081 0,101 0,054 0,081 0,074 0,088
Lower value of cutting speed is used for high-stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group. Above parameters are based on ideal conditions. For smaller taper machining centers, please adjust parameters accordingly on diameters greater than 12mm.
8
WWW.WIDIA.COM
A-12-02996EN_me_WIDIA_SlimLine_Catalog.qxp:WIDIA
10/15/12
10:36 AM
Page 9
High-Performance Solid Carbide End Mills • Finishing List 4503 RJ • JIS • Center cutting.
P TiAlN
1
2
3
4
5
6
1
M 2 3
1
K 2 3
1
2
3
4
H 1
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
P - Steels M - Stainless Steels
䢇
K - Cast Iron N - Non-Ferrous
䢇
S
S - High-Temp Alloys H - Hard Materials
D1 1,0 2,0 3,0
D 4 4 6
length of cut Ap1 max 3,00 3,00 8,00
length L 50 50 50
TiAlN - RJ 450301001RJ 450302001RJ 450303002RJ
£ 10.44 10.79 11.54
4,0 5,0
6 6
12,00 14,00
50 50
450304002RJ 450305002RJ
11.39 11.49
6,0 8,0
6 8
16,00 20,00
50 63
450306002RJ 450308003RJ
10.86 15.44
10,0 12,0
10 12
22,00 25,00
76 76
450310004RJ 450312005RJ
26.76 41.10
16,0 20,0
16 20
32,00 38,00
89 104
450316006RJ 450320007RJ
64.09 106.92
Lists 4503 RJ • JIS
A
Group P1 P2 P3 P4 P5 P6 M1 M2 M3 K1 K2 K3 S1 S2 S3 S4 H1
ap 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D
ae 0,3 x D 0,3 x D 0,3 x D 0,3 x D 0,3 x D 0,3 x D 0,3 x D 0,3 x D 0,3 x D 0,3 x D 0,3 x D 0,3 x D 0,3 x D 0,3 x D 0,3 x D 0,3 x D 0,3 x D
B
TiAlN
ap 0,5 x D 0,5 x D 0,5 x D 0,3 x D 0,5 x D 0,3 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,3 x D
Cutting Speed Vc m/min Min Max 150 200 140 190 160 180 140 160 60 100 50 80 80 100 60 80 60 80 120 160 110 140 100 130 90 115 20 40 50 80 45 65 100 140
Recommended Feed per Tooth (Fz=mm/th) for Side Milling (A). For Slotting (B), reduce Fz by 20%. D1 - Diameter mm Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz
1,0 0,007 0,007 0,006 0,005 0,005 0,004 0,006 0,005 0,004 0,007 0,006 0,005 0,006 0,003 0,005 0,004 0,005
2,0 0,014 0,014 0,011 0,010 0,009 0,008 0,011 0,009 0,008 0,014 0,011 0,009 0,011 0,006 0,009 0,007 0,010
4,0 0,028 0,028 0,023 0,021 0,019 0,016 0,023 0,019 0,016 0,028 0,023 0,019 0,023 0,013 0,019 0,016 0,021
6,0 0,044 0,044 0,036 0,033 0,029 0,025 0,036 0,029 0,025 0,044 0,036 0,029 0,036 0,019 0,029 0,026 0,033
8,0 0,060 0,060 0,050 0,045 0,040 0,034 0,050 0,040 0,034 0,060 0,050 0,040 0,050 0,026 0,040 0,037 0,045
10,0 0,072 0,072 0,061 0,054 0,048 0,040 0,061 0,048 0,040 0,072 0,061 0,048 0,061 0,032 0,048 0,045 0,054
12,0 0,083 0,083 0,070 0,062 0,056 0,047 0,070 0,056 0,047 0,083 0,070 0,056 0,070 0,037 0,056 0,052 0,062
16,0 0,101 0,101 0,087 0,077 0,070 0,057 0,087 0,070 0,057 0,101 0,087 0,070 0,087 0,046 0,070 0,064 0,077
20,0 0,114 0,114 0,101 0,088 0,081 0,065 0,101 0,081 0,065 0,114 0,101 0,081 0,101 0,054 0,081 0,074 0,088
Lower value of cutting speed is used for high-stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group. Above parameters are based on ideal conditions. For smaller taper machining centers, please adjust parameters accordingly on diameters greater than 12mm.
WWW.WIDIA.COM
9
A-12-02996EN_me_WIDIA_SlimLine_Catalog.qxp:WIDIA
10/15/12
10:36 AM
Page 10
High-Performance Solid Carbide End Mills • Finishing Lists D507 D517 • Center cutting.
P TiAlN
1
2
3
4
5
6
1
M 2 3
1
K 2 3
1
2
3
4
H 1
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
P - Steels M - Stainless Steels
䢇
K - Cast Iron N - Non-Ferrous
䢇
S
S - High-Temp Alloys H - Hard Materials
D1 6,0 6,0
D 6 6
length of cut Ap1 max 10,00 13,00
length L 54 57
TiAlN - RW D50706002RW D51706002RW
£ 13.83 16.30
8,0 8,0
8 8
12,00 19,00
58 63
D50708003RW D51708003RW
20.19 20.80
10,0 10,0
10 10
14,00 22,00
66 72
D50710004RW D51710004RW
26.23 34.10
12,0 12,0
12 12
16,00 26,00
73 83
D50712005RW D51712005RW
31.61 41.30
16,0 16,0
16 16
22,00 32,00
82 92
D50716006RW D51716006RW
59.26 78.50
20,0 20,0
20 20
26,00 38,00
92 104
D50720007RW D51720007RW
89.14 108.00
Lists D507 D517
A
Group P1 P2 P3 P4 P5 P6 M1 M2 M3 K1 K2 K3 S1 S2 S3 S4 H1
ap 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D
TiAlN Cutting Speed Vc m/min ae 0,05 x D 0,05 x D 0,05 x D 0,04 x D 0,05 x D 0,04 x D 0,05 x D 0,05 x D 0,05 x D 0,05 x D 0,05 x D 0,05 x D 0,04 x D 0,04 x D 0,05 x D 0,05 x D 0,04 x D
Min 150 140 120 90 60 50 80 60 60 120 110 100 50 20 50 45 80
-
Recommended Feed per Tooth (Fz=mm/th) for Side Milling (A). D1 - Diameter Max 200 190 160 150 100 75 100 80 80 160 140 130 90 40 80 65 140
mm Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz
6,0 0,044 0,044 0,036 0,033 0,029 0,025 0,036 0,029 0,025 0,044 0,036 0,029 0,036 0,019 0,029 0,026 0,033
8,0 0,060 0,060 0,050 0,045 0,040 0,034 0,050 0,040 0,034 0,060 0,050 0,040 0,050 0,026 0,040 0,037 0,045
10,0 0,072 0,072 0,061 0,054 0,048 0,040 0,061 0,048 0,040 0,072 0,061 0,048 0,061 0,032 0,048 0,045 0,054
12,0 0,083 0,083 0,070 0,062 0,056 0,047 0,070 0,056 0,047 0,083 0,070 0,056 0,070 0,037 0,056 0,052 0,062
16,0 0,101 0,101 0,087 0,077 0,070 0,057 0,087 0,070 0,057 0,101 0,087 0,070 0,087 0,046 0,070 0,064 0,077
18,0 0,108 0,108 0,095 0,083 0,076 0,061 0,095 0,076 0,061 0,108 0,095 0,076 0,095 0,050 0,076 0,069 0,083
20,0 0,114 0,114 0,101 0,088 0,081 0,065 0,101 0,081 0,065 0,114 0,101 0,081 0,101 0,054 0,081 0,074 0,088
Lower value of cutting speed is used for high-stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group. For better surface finish, reduce feed per tooth. Above parameters are based on ideal conditions. For smaller taper machining centers, please adjust parameters accordingly on diameters greater than 12mm.
10
WWW.WIDIA.COM
A-12-02996EN_me_WIDIA_SlimLine_Catalog.qxp:WIDIA
10/15/12
10:36 AM
Page 11
General Purpose+ Solid Carbide End Mills • Roughing/Finishing List 423004 • NINA™ • Center cutting.
P AlTiN
1
2
3
4
1
2
1
K 2 3
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
P - Steels M - Stainless Steels
M
䢇
K - Cast Iron N - Non-Ferrous
S - High-Temp Alloys H - Hard Materials
K30F-DCHP
D1 4,0 6,0
D 6 6
length of cut Ap1 max 7,00 8,00
length L 38 38
BCH 0,40 0,40
AlTiN - MT 423004-000040 423004-000060
£ 7.42 8.38
8,0 10,0
8 10
11,00 13,00
43 50
0,40 0,50
423004-000080 423004-000100
10.56 15.22
12,0
12
15,00
55
0,50
423004-000120
20.50
List 423004 • NINA
K30F-DCHP A
Group P1 P2 P3 P4 M1 M2 K1 K2 K3
ap 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D
ae 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D
B
AlTiN
ap 1xD 1xD 1xD 1xD 1xD 1xD 1xD 1xD 1xD
Cutting Speed Vc m/min Min Max 180 220 160 200 160 180 140 160 90 115 60 80 120 150 110 130 100 130
Recommended Feed per Tooth (Fz=mm/th) for Side Milling (A). For Slotting (B), reduce Fz by 20%. D1 - Diameter mm Fz Fz Fz Fz Fz Fz Fz Fz Fz
4,0 0,030 0,030 0,025 0,023 0,025 0,020 0,030 0,025 0,020
6,0 0,050 0,050 0,040 0,036 0,040 0,030 0,050 0,040 0,030
8,0 0,060 0,060 0,050 0,045 0,050 0,040 0,060 0,050 0,040
10,0 0,070 0,070 0,060 0,054 0,060 0,050 0,070 0,060 0,050
12,0 0,072 0,072 0,070 0,063 0,065 0,060 0,080 0,070 0,060
Lower value of cutting speed is used for high-stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
WWW.WIDIA.COM
11
A-12-02996EN_me_WIDIA_SlimLine_Catalog.qxp:WIDIA
10/15/12
10:36 AM
Page 12
High-Performance Solid Carbide End Mills • Aluminium List 5102 • AluSurf™ • Center cutting.
N Uncoated
1
2
䢇
䢇
P - Steels M - Stainless Steels
K - Cast Iron N - Non-Ferrous
S - High-Temp Alloys H - Hard Materials
D1 3,0
D 3
length of cut Ap1 max 12,00
length L 38
UNCOATED - .. 510203000..
£ 9.68
4,0 5,0 6,0
4 5 6
12,00 14,00 16,00
50 50 50
510204001.. 510205001.. 510206002..
11.19 12.33 13.23
8,0 10,0
8 10
20,00 22,00
63 76
510208003.. 510210004..
14.66 23.87
12,0 16,0
12 16
25,00 32,00
76 89
510212005.. 510216006..
31.26 56.42
20,0
20
38,00
104
510220007..
102.11
List 5102 • AluSurf
A
Group N1 N2
ap 1,5 x D 1,5 x D
ae 0,5 x D 0,5 x D
B
Uncoated
ap 1xD 1xD
Cutting Speed Vc m/min Min Max 500 2000 500 1500
Recommended Feed per Tooth (Fz=mm/th) for Side Milling (A). For Slotting (B), reduce Fz by 20%. D1 - Diameter mm Fz Fz
4,0 0,036 0,032
6,0 0,054 0,049
8,0 0,072 0,065
10,0 0,090 0,081
12,0 0,108 0,097
16,0 0,144 0,130
20,0 0,180 0,162
Multiply ap for milling machine spindle with ceramic bearings by 0,5. For better surface finish, reduce feed per tooth. Above parameters are based on ideal conditions. For smaller taper machining centers, please adjust parameters accordingly on diameters greater than 12mm.
12
WWW.WIDIA.COM
A-12-02996EN_me_WIDIA_SlimLine_Catalog.qxp:WIDIA
10/15/12
10:36 AM
Page 13
General Purpose HSS-E End Mills • Roughing/Finishing List 6606 • Center cutting. • Fine pitch.
P TiAlN
1
2
3
5
1
M 2 3
1
2
1
2
3
4
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
P - Steels M - Stainless Steels
䢇
K
S
K - Cast Iron N - Non-Ferrous
S - High-Temp Alloys H - Hard Materials
D1 6,0 8,0
D 6 10
length of cut Ap1 max 13,00 19,00
length L 57 69
BCH 0,25 0,25
ZU 3 3
TiAlN - LW 660606002LW 660608004LW
£ 15.94 19.09
10,0 12,0 16,0
10 12 16
22,00 26,00 32,00
72 83 92
0,25 0,35 0,35
4 4 4
660610004LW 660612005LW 660616006LW
18.51 23.34 30.03
20,0
20
38,00
104
0,35
4
660620007LW
41.23
25,0
25
45,00
121
0,50
5
660625008LW
63.20
List 6606
A
B
Recommended Feed per Tooth (Fz=mm/th) for Side Milling (A). For Slotting (B), reduce Fz by 20%.
TiAlN Cutting Speed Vc m/min
Group P1 P2 P3 P5 M1 M2 M3 K1 K2 S1 S2 S3 S4
ap 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D
ae 0,5 x D 0,5 x D 0,5 x D 0,3 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,3 x D 0,5 x D 0,3 x D
ap 1xD 1xD 1xD 0,5 x D 1xD 1xD 1xD 1xD 1xD 1xD 0,5 x D 1xD 0,5 x D
Min 70 60 50 25 25 25 15 70 50 15 5 15 10
-
D1 - Diameter Max 80 80 70 35 35 30 20 80 70 30 15 30 30
mm Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz
6,0 0,040 0,040 0,034 0,027 0,034 0,027 0,023 0,040 0,034 0,034 0,018 0,027 0,024
8,0 0,055 0,055 0,046 0,036 0,046 0,036 0,031 0,055 0,046 0,046 0,024 0,036 0,033
10,0 0,063 0,063 0,053 0,042 0,053 0,042 0,035 0,063 0,053 0,053 0,028 0,042 0,039
12,0 0,070 0,070 0,059 0,047 0,059 0,047 0,039 0,070 0,059 0,059 0,031 0,047 0,043
16,0 0,078 0,078 0,066 0,053 0,066 0,053 0,044 0,078 0,066 0,066 0,035 0,053 0,049
20,0 0,085 0,085 0,073 0,059 0,073 0,059 0,048 0,085 0,073 0,073 0,039 0,059 0,054
25,0 0,104 0,104 0,096 0,076 0,096 0,076 0,060 0,104 0,096 0,096 0,051 0,076 0,070
Lower value of cutting speed is used for high-stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group. Above parameters are based on ideal conditions. For smaller taper machining centers, please adjust parameters accordingly on diameters greater than 12mm.
WWW.WIDIA.COM
13
A-12-02996EN_me_WIDIA_SlimLine_Catalog.qxp:WIDIA
10/15/12
10:36 AM
Page 14
Multiple-Material Drilling • WIDIA VariDrill ™
™
The new VariDrill advanced point geometry design offers the ultimate solution for multipurpose drilling operations. It offers dependable tool life in all materials due to less chipping on the cutting edge.
™
VariDrill
• Reduced chipping on cutting edge means longer tool life. • New geometry design offers strength and versatility. • Delivers proper surface finish across multiple materials: steel, stainless steel, cast iron, aluminium, and high-temp alloys.
New WIDIA WU25PD™ drilling grade Extremely high wear resistance and longer tool life.
VariDrill core design Free chip flow and chip evacuation.
VariDrill point design Long tool life in all materials, less chipping on cutting edge.
14
Marginless design
Precision shank
Distributes cutting forces evenly for less chipping on the cutting edge.
Low run out.
WWW.WIDIA.COM
A-12-02996EN_me_WIDIA_SlimLine_Catalog.qxp:WIDIA
10/15/12
10:36 AM
Page 15
Page Head 1 Page head 2
Innovative Technology VariDrill™ is a technologically advanced holemaking solution. These high-performance solid carbide drills were designed in Germany to provide the transportation, aerospace, general engineering, and energy industries with a tool that performs on multiple materials.
Elegance, Strength, and Versatility WIDIA’s engineers developed an innovative new design to deliver drilling performance. These Solid Carbide drills have a distinctive geometry and marginless design. The VariDrill point is versatile enough to work through steel, stainless steel, cast iron, aluminium, and a range of high-temp alloys.
Optimum Hole Quality The unique marginless design reduces chipping on the tool’s edge and stabilises cutting forces. This unique tool geometry enables chips to roll smoothly and evacuate easily, resulting in noticeably less friction, heat, jamming, and scratching. By minimising these drilling issues, VariDrill delivers an optimum surface finish with every hole — no matter the material.
More Options and Longer Tool Life Aside from its uniquely engineered design, VariDrill also offers a broad portfolio of drilling options. With more than 2,200 items, VariDrill offers more choices than any other drill for general engineering operations. And because most drills can be reconditioned, your tools will gain extended life.
VariDrill — innovatively designed and technologically advanced. Make VariDrill your go-to drill for hole after hole...after hole.
NEW!
WWW.WIDIA.COM
15
A-12-02996EN_me_WIDIA_SlimLine_Catalog.qxp:WIDIA
10/15/12
10:37 AM
Page 16
Solid Carbide Drills VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 3 x D
VDS201A/VDS401A • 3 x D
VDS201A • WU25PD VDS201A01000 VDS201A01016
£ 20.30 20.70
VDS401A • WU25PD — —
£ — —
D1 diameter mm in 1,000 .0394 1,016 .0400
VDS201A01041 VDS201A01067
20.70 20.70
— —
— —
1,041 1,067
VDS201A01092 VDS201A01100
20.70 20.70
— —
— —
VDS201A01181 VDS201A01191
20.70 20.70
— —
VDS201A01200 VDS201A01300
20.70 20.70
VDS201A01321 VDS201A01397
L4 max 5 5
L5 0,1 0,1
L 58 58
LS 28 28
D 4 4
.0410 .0420
5 5
0,2 0,2
58 58
28 28
4 4
1,092 1,100
.0430 .0433
5 5
0,2 0,2
58 58
28 28
4 4
— —
1,181 1,191
.0465 .0469
5 5
0,2 0,2
58 58
28 28
4 4
— —
— —
1,200 1,300
.0472 .0512
5 5
0,2 0,2
58 58
28 28
4 4
20.70 20.70
— —
— —
1,321 1,397
.0520 .0550
5 5
0,2 0,2
58 58
28 28
4 4
VDS201A01400 VDS201A01500
20.70 20.70
— VDS401A01500
— 27.90
1,400 1,500
.0551 .0591
5 6
0,2 0,2
58 58
28 28
4 4
VDS201A01600 VDS201A01700
20.70 20.70
VDS401A01600 VDS401A01700
27.90 27.90
1,600 1,700
.0630 .0669
6 6
0,2 0,3
58 58
28 28
4 4
VDS201A01800 VDS201A01900
20.70 20.70
VDS401A01800 VDS401A01900
27.90 27.90
1,800 1,900
.0709 .0748
6 6
0,3 0,3
58 58
28 28
4 4
VDS201A01984 VDS201A02000
20.70 20.70
VDS401A01984 VDS401A02000
27.90 27.90
1,984 2,000
.0781 .0787
10 10
0,3 0,3
58 58
28 28
4 4
VDS201A02100 VDS201A02200
21.00 21.00
VDS401A02100 VDS401A02200
28.40 28.40
2,100 2,200
.0827 .0866
10 10
0,3 0,3
58 58
28 28
4 4
VDS201A02300 VDS201A02383
21.00 21.00
VDS401A02300 VDS401A02383
28.40 28.40
2,300 2,383
.0906 .0938
10 12
0,4 0,4
58 58
28 28
4 4
VDS201A02400 VDS201A02439
21.00 21.00
VDS401A02400 VDS401A02439
28.40 28.40
2,400 2,439
.0945 .0960
12 12
0,4 0,4
58 58
28 28
4 4
VDS201A02489 VDS201A02500
21.00 21.00
VDS401A02489 VDS401A02500
28.40 28.40
2,489 2,500
.0980 .0984
12 12
0,4 0,4
58 58
28 28
4 4
VDS201A02578 VDS201A02600
21.00 21.00
VDS401A02578 VDS401A02600
28.40 28.40
2,578 2,600
.1015 .1024
12 12
0,4 0,4
58 58
28 28
4 4
VDS201A02642 VDS201A02700
21.00 21.00
VDS401A02642 VDS401A02700
28.40 28.40
2,642 2,700
.1040 .1063
12 12
0,4 0,4
58 58
28 28
4 4
VDS201A02705 VDS201A02779
21.00 21.00
VDS401A02705 VDS401A02779
28.40 28.40
2,705 2,779
.1065 .1094
12 12
0,4 0,4
58 58
28 28
4 4
VDS201A02800 VDS201A02820
21.00 21.00
VDS401A02800 VDS401A02820
28.40 28.40
2,800 2,820
.1102 .1110
12 12
0,5 0,5
58 58
28 28
4 4
VDS201A02870 VDS201A02900
21.00 21.00
VDS401A02870 VDS401A02900
28.40 28.40
2,870 2,900
.1130 .1142
12 12
0,5 0,5
58 58
28 28
4 4
VDS201A02947 VDS201A03000
21.00 21.00
VDS401A02947 VDS401A03000
28.40 28.40
2,947 3,000
.1160 .1181
12 14
0,5 0,5
58 62
28 36
4 6
(continued)
16
WWW.WIDIA.COM
A-12-02996EN_me_WIDIA_SlimLine_Catalog.qxp:WIDIA
10/15/12
10:37 AM
Page 17
Page Head 1 Solid Carbide Page Drills head 2 VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 3 x D (VDS201A/VDS401A • 3 x D continued)
VDS201A • WU25PD VDS201A03048 VDS201A03100
£ 21.40 21.40
VDS401A • WU25PD VDS401A03048 VDS401A03100
£ 28.90 28.90
D1 diameter mm in 3,048 .1200 3,100 .1220
VDS201A03175 VDS201A03200
21.40 21.40
VDS401A03175 VDS401A03200
28.90 28.90
3,175 3,200
VDS201A03264 VDS201A03300
21.40 21.40
VDS401A03264 VDS401A03300
28.90 28.90
VDS201A03400 VDS201A03455
21.40 21.40
VDS401A03400 VDS401A03455
VDS201A03500 VDS201A03571
21.40 21.40
VDS201A03600 VDS201A03658
L4 max 14 14
L5 0,5 0,5
L 62 62
LS 36 36
D 6 6
.1250 .1260
14 14
0,5 0,5
62 62
36 36
6 6
3,264 3,300
.1285 .1299
14 14
0,5 0,5
62 62
36 36
6 6
28.90 28.90
3,400 3,455
.1339 .1360
14 14
0,6 0,6
62 62
36 36
6 6
VDS401A03500 VDS401A03571
28.90 28.90
3,500 3,571
.1378 .1406
14 14
0,6 0,6
62 62
36 36
6 6
21.40 21.40
VDS401A03600 VDS401A03658
28.90 28.90
3,600 3,658
.1417 .1440
14 14
0,6 0,6
62 62
36 36
6 6
VDS201A03700 VDS201A03734
21.40 21.40
VDS401A03700 VDS401A03734
28.90 28.90
3,700 3,734
.1457 .1470
14 14
0,6 0,6
62 62
36 36
6 6
VDS201A03800 VDS201A03900
21.40 21.40
VDS401A03800 VDS401A03900
28.90 28.90
3,800 3,900
.1496 .1535
17 17
0,6 0,6
66 66
36 36
6 6
VDS201A03970 VDS201A04000
21.40 21.40
VDS401A03970 VDS401A04000
28.90 28.90
3,970 4,000
.1563 .1575
17 17
0,7 0,7
66 66
36 36
6 6
VDS201A04039 VDS201A04090
21.80 21.80
VDS401A04039 VDS401A04090
29.90 29.90
4,039 4,090
.1590 .1610
17 17
0,7 0,7
66 66
36 36
6 6
VDS201A04100 VDS201A04200
21.80 21.80
VDS401A04100 VDS401A04200
29.90 29.90
4,100 4,200
.1614 .1654
17 17
0,7 0,7
66 66
36 36
6 6
VDS201A04217 VDS201A04300
21.80 21.80
VDS401A04217 VDS401A04300
29.90 29.90
4,217 4,300
.1660 .1693
17 17
0,7 0,7
66 66
36 36
6 6
VDS201A04366 VDS201A04400
21.80 21.80
VDS401A04366 VDS401A04400
29.90 29.90
4,366 4,400
.1719 .1732
17 17
0,7 0,7
66 66
36 36
6 6
VDS201A04500 VDS201A04600
21.80 21.80
VDS401A04500 VDS401A04600
29.90 29.90
4,500 4,600
.1772 .1811
17 17
0,7 0,8
66 66
36 36
6 6
VDS201A04623 VDS201A04700
21.80 21.80
VDS401A04623 VDS401A04700
29.90 29.90
4,623 4,700
.1820 .1850
17 17
0,8 0,8
66 66
36 36
6 6
VDS201A04763 VDS201A04800
21.80 21.80
VDS401A04763 VDS401A04800
29.90 29.90
4,763 4,800
.1875 .1890
20 20
0,8 0,8
66 66
36 36
6 6
VDS201A04852 VDS201A04900
21.80 21.80
VDS401A04852 VDS401A04900
29.90 29.90
4,852 4,900
.1910 .1929
20 20
0,8 0,8
66 66
36 36
6 6
VDS201A05000 VDS201A05100
21.80 21.80
VDS401A05000 VDS401A05100
29.90 30.50
5,000 5,100
.1969 .2008
20 20
0,8 0,8
66 66
36 36
6 6
VDS201A05106 VDS201A05159
21.80 21.80
VDS401A05106 VDS401A05159
30.50 30.50
5,106 5,159
.2010 .2031
20 20
0,8 0,9
66 66
36 36
6 6
VDS201A05200 VDS201A05300
21.80 21.80
VDS401A05200 VDS401A05300
30.50 30.50
5,200 5,300
.2047 .2087
20 20
0,9 0,9
66 66
36 36
6 6
VDS201A05400 VDS201A05410
21.80 21.80
VDS401A05400 VDS401A05410
30.50 30.50
5,400 5,410
.2126 .2130
20 20
0,9 0,9
66 66
36 36
6 6
VDS201A05500 VDS201A05558
21.80 21.80
VDS401A05500 VDS401A05558
30.50 30.50
5,500 5,558
.2165 .2188
20 20
0,9 0,9
66 66
36 36
6 6
(continued)
WWW.WIDIA.COM
17
A-12-02996EN_me_WIDIA_SlimLine_Catalog.qxp:WIDIA
10/15/12
10:37 AM
Page 18
Solid Carbide Drills VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 3 x D (VDS201A/VDS401A • 3 x D continued)
VDS201A • WU25PD VDS201A05600 VDS201A05616
£ 21.80 21.80
VDS401A • WU25PD VDS401A05600 VDS401A05616
£ 30.50 30.50
D1 diameter mm in 5,600 .2205 5,616 .2211
VDS201A05700 VDS201A05800
21.80 21.80
VDS401A05700 VDS401A05800
30.50 30.50
5,700 5,800
VDS201A05900 VDS201A05954
21.80 21.80
VDS401A05900 VDS401A05954
30.50 30.50
VDS201A06000 VDS201A06100
21.80 22.20
VDS401A06000 VDS401A06100
VDS201A06200 VDS201A06300
22.20 22.20
VDS201A06350 VDS201A06400
L4 max 20 20
L5 0,9 0,9
L 66 66
LS 36 36
D 6 6
.2244 .2283
20 20
1,0 1,0
66 66
36 36
6 6
5,900 5,954
.2323 .2344
20 20
1,0 1,0
66 66
36 36
6 6
30.50 33.20
6,000 6,100
.2362 .2402
20 24
1,0 1,0
66 79
36 36
6 8
VDS401A06200 VDS401A06300
33.20 33.20
6,200 6,300
.2441 .2480
24 24
1,0 1,1
79 79
36 36
8 8
22.20 22.20
VDS401A06350 VDS401A06400
33.20 33.20
6,350 6,400
.2500 .2520
24 24
1,1 1,1
79 79
36 36
8 8
VDS201A06500 VDS201A06528
22.20 22.20
VDS401A06500 VDS401A06528
33.20 33.20
6,500 6,528
.2559 .2570
24 24
1,1 1,1
79 79
36 36
8 8
VDS201A06600 VDS201A06630
22.20 22.20
VDS401A06600 VDS401A06630
33.20 33.20
6,600 6,630
.2598 .2610
24 24
1,1 1,1
79 79
36 36
8 8
VDS201A06700 VDS201A06746
22.20 22.20
VDS401A06700 VDS401A06746
33.20 33.20
6,700 6,746
.2638 .2656
24 24
1,1 1,1
79 79
36 36
8 8
VDS201A06800 VDS201A06900
22.20 22.20
VDS401A06800 VDS401A06900
33.20 33.20
6,800 6,900
.2677 .2717
24 24
1,1 1,2
79 79
36 36
8 8
VDS201A07000 VDS201A07100
22.20 22.90
VDS401A07000 VDS401A07100
33.20 35.50
7,000 7,100
.2756 .2795
24 29
1,2 1,2
79 79
36 36
8 8
VDS201A07145 VDS201A07200
22.90 22.90
VDS401A07145 VDS401A07200
35.50 35.50
7,145 7,200
.2813 .2835
29 29
1,2 1,2
79 79
36 36
8 8
VDS201A07300 VDS201A07400
22.90 22.90
VDS401A07300 VDS401A07400
35.50 35.50
7,300 7,400
.2874 .2913
29 29
1,2 1,3
79 79
36 36
8 8
VDS201A07500 VDS201A07541
22.90 22.90
VDS401A07500 VDS401A07541
35.50 35.50
7,500 7,541
.2953 .2969
29 29
1,3 1,3
79 79
36 36
8 8
VDS201A07600 VDS201A07700
22.90 22.90
VDS401A07600 VDS401A07700
35.50 35.50
7,600 7,700
.2992 .3031
29 29
1,3 1,3
79 79
36 36
8 8
VDS201A07800 VDS201A07900
22.90 22.90
VDS401A07800 VDS401A07900
35.50 35.50
7,800 7,900
.3071 .3110
29 29
1,3 1,3
79 79
36 36
8 8
VDS201A07938 VDS201A08000
22.90 22.90
VDS401A07938 VDS401A08000
35.50 35.50
7,938 8,000
.3125 .3150
29 29
1,3 1,4
79 79
36 36
8 8
VDS201A08100 VDS201A08200
25.10 25.10
VDS401A08100 VDS401A08200
38.90 38.90
8,100 8,200
.3189 .3228
35 35
1,4 1,4
89 89
40 40
10 10
VDS201A08300 VDS201A08334
25.10 25.10
VDS401A08300 VDS401A08334
38.90 38.90
8,300 8,334
.3268 .3281
35 35
1,4 1,4
89 89
40 40
10 10
VDS201A08400 VDS201A08433
25.10 25.10
VDS401A08400 VDS401A08433
38.90 38.90
8,400 8,433
.3307 .3320
35 35
1,4 1,4
89 89
40 40
10 10
VDS201A08500 VDS201A08600
25.10 25.10
VDS401A08500 VDS401A08600
38.90 38.90
8,500 8,600
.3346 .3386
35 35
1,4 1,5
89 89
40 40
10 10
VDS201A08700 VDS201A08733
25.10 25.10
VDS401A08700 VDS401A08733
38.90 38.90
8,700 8,733
.3425 .3438
35 35
1,5 1,5
89 89
40 40
10 10
VDS201A08800 VDS201A08900
25.10 25.10
VDS401A08800 VDS401A08900
38.90 38.90
8,800 8,900
.3465 .3504
35 35
1,5 1,5
89 89
40 40
10 10
(continued)
18
WWW.WIDIA.COM
A-12-02996EN_me_WIDIA_SlimLine_Catalog.qxp:WIDIA
10/15/12
10:37 AM
Page 19
Page Head 1 Solid Carbide Page Drills head 2 VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 3 x D (VDS201A/VDS401A • 3 x D continued)
VDS201A • WU25PD VDS201A09000 VDS201A09100
£ 25.10 25.80
VDS401A • WU25PD VDS401A09000 VDS401A09100
£ 38.90 42.60
D1 diameter mm in 9,000 .3543 9,100 .3583
VDS201A09129 VDS201A09200
25.80 25.80
VDS401A09129 VDS401A09200
42.60 42.60
9,129 9,200
VDS201A09300 VDS201A09347
25.80 25.80
VDS401A09300 VDS401A09347
42.60 42.60
VDS201A09400 VDS201A09500
25.80 25.80
VDS401A09400 VDS401A09500
VDS201A09525 VDS201A09600
25.80 25.80
VDS201A09700 VDS201A09800
L4 max 35 35
L5 1,5 1,5
L 89 89
LS 40 40
D 10 10
.3594 .3622
35 35
1,6 1,6
89 89
40 40
10 10
9,300 9,347
.3661 .3680
35 35
1,6 1,6
89 89
40 40
10 10
42.60 42.60
9,400 9,500
.3701 .3740
35 35
1,6 1,6
89 89
40 40
10 10
VDS401A09525 VDS401A09600
42.60 42.60
9,525 9,600
.3750 .3780
35 35
1,6 1,6
89 89
40 40
10 10
25.80 25.80
VDS401A09700 VDS401A09800
42.60 42.60
9,700 9,800
.3819 .3858
35 35
1,7 1,7
89 89
40 40
10 10
VDS201A09900 VDS201A09921
25.80 25.80
VDS401A09900 VDS401A09921
42.60 42.60
9,900 9,921
.3898 .3906
35 35
1,7 1,7
89 89
40 40
10 10
VDS201A10000 VDS201A10100
25.80 33.20
VDS401A10000 VDS401A10100
42.60 51.50
10,000 10,100
.3937 .3976
35 40
1,7 1,7
89 102
40 45
10 12
VDS201A10200 VDS201A10300
33.20 33.20
VDS401A10200 VDS401A10300
51.50 51.50
10,200 10,300
.4016 .4055
40 40
1,7 1,8
102 102
45 45
12 12
VDS201A10320 VDS201A10400
33.20 33.20
VDS401A10320 VDS401A10400
51.50 51.50
10,320 10,400
.4063 .4094
40 40
1,8 1,8
102 102
45 45
12 12
VDS201A10500 VDS201A10600
33.20 33.20
VDS401A10500 VDS401A10600
51.50 51.50
10,500 10,600
.4134 .4173
40 40
1,8 1,8
102 102
45 45
12 12
VDS201A10700 VDS201A10716
33.20 33.20
VDS401A10700 VDS401A10716
51.50 51.50
10,700 10,716
.4213 .4219
40 40
1,8 1,8
102 102
45 45
12 12
VDS201A10800 VDS201A10900
33.20 33.20
VDS401A10800 VDS401A10900
51.50 51.50
10,800 10,900
.4252 .4291
40 40
1,8 1,9
102 102
45 45
12 12
VDS201A11000 VDS201A11100
33.20 34.70
VDS401A11000 VDS401A11100
51.50 53.80
11,000 11,100
.4331 .4370
40 40
1,9 1,9
102 102
45 45
12 12
VDS201A11113 VDS201A11200
34.70 34.70
VDS401A11113 VDS401A11200
53.80 53.80
11,113 11,200
.4375 .4409
40 40
1,9 1,9
102 102
45 45
12 12
VDS201A11300 VDS201A11400
34.70 34.70
VDS401A11300 VDS401A11400
53.80 53.80
11,300 11,400
.4449 .4488
40 40
1,9 2,0
102 102
45 45
12 12
VDS201A11500 VDS201A11509
34.70 34.70
VDS401A11500 VDS401A11509
53.80 53.80
11,500 11,509
.4528 .4531
40 40
2,0 2,0
102 102
45 45
12 12
VDS201A11600 VDS201A11700
34.70 34.70
VDS401A11600 VDS401A11700
53.80 53.80
11,600 11,700
.4567 .4606
40 40
2,0 2,0
102 102
45 45
12 12
VDS201A11800 VDS201A11900
34.70 34.70
VDS401A11800 VDS401A11900
53.80 53.80
11,800 11,900
.4646 .4685
40 40
2,0 2,0
102 102
45 45
12 12
VDS201A11908 VDS201A12000
34.70 34.70
VDS401A11908 VDS401A12000
53.80 53.80
11,908 12,000
.4688 .4724
40 40
2,0 2,1
102 102
45 45
12 12
VDS201A12100 VDS201A12200
46.50 46.50
VDS401A12100 VDS401A12200
72.00 72.00
12,100 12,200
.4764 .4803
43 43
2,1 2,1
107 107
45 45
14 14
VDS201A12300 VDS201A12304
46.50 46.50
VDS401A12300 VDS401A12304
72.00 72.00
12,300 12,304
.4843 .4844
43 43
2,1 2,1
107 107
45 45
14 14
VDS201A12400 VDS201A12500
46.50 46.50
VDS401A12400 VDS401A12500
72.00 72.00
12,400 12,500
.4882 .4921
43 43
2,1 2,1
107 107
45 45
14 14
(continued)
WWW.WIDIA.COM
19
A-12-02996EN_me_WIDIA_SlimLine_Catalog.qxp:WIDIA
10/15/12
10:37 AM
Page 20
Solid Carbide Drills VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 3 x D (VDS201A/VDS401A • 3 x D continued)
VDS201A • WU25PD VDS201A12600 VDS201A12700
£ 46.50 46.50
VDS401A • WU25PD VDS401A12600 VDS401A12700
£ 72.00 72.00
D1 diameter mm in 12,600 .4961 12,700 .5000
VDS201A12800 VDS201A12900
46.50 46.50
VDS401A12800 VDS401A12900
72.00 72.00
12,800 12,900
VDS201A13000 VDS201A13096
46.50 48.00
VDS401A13000 VDS401A13096
72.00 74.50
VDS201A13100 VDS201A13200
48.00 48.00
VDS401A13100 VDS401A13200
VDS201A13300 VDS201A13400
48.00 48.00
VDS201A13500 VDS201A13600
L4 max 43 43
L5 2,2 2,2
L 107 107
LS 45 45
D 14 14
.5039 .5079
43 43
2,2 2,2
107 107
45 45
14 14
13,000 13,096
.5118 .5156
43 43
2,2 2,3
107 107
45 45
14 14
74.50 74.50
13,100 13,200
.5157 .5197
43 43
2,3 2,3
107 107
45 45
14 14
VDS401A13300 VDS401A13400
74.50 74.50
13,300 13,400
.5236 .5276
43 43
2,3 2,3
107 107
45 45
14 14
48.00 48.00
VDS401A13500 VDS401A13600
74.50 74.50
13,500 13,600
.5315 .5354
43 43
2,3 2,3
107 107
45 45
14 14
VDS201A13700 VDS201A13800
48.00 48.00
VDS401A13700 VDS401A13800
74.50 74.50
13,700 13,800
.5394 .5433
43 43
2,4 2,4
107 107
45 45
14 14
VDS201A13891 VDS201A13900
48.00 48.00
VDS401A13891 VDS401A13900
74.50 74.50
13,891 13,900
.5469 .5472
43 43
2,4 2,4
107 107
45 45
14 14
VDS201A14000 VDS201A14100
48.00 55.20
VDS401A14000 VDS401A14100
74.50 85.90
14,000 14,100
.5512 .5551
43 45
2,4 2,4
107 115
45 48
14 16
VDS201A14200 VDS201A14288
55.20 55.20
VDS401A14200 VDS401A14288
85.90 85.90
14,200 14,288
.5591 .5625
45 45
2,5 2,5
115 115
48 48
16 16
VDS201A14300 VDS201A14400
55.20 55.20
VDS401A14300 VDS401A14400
85.90 85.90
14,300 14,400
.5630 .5669
45 45
2,5 2,5
115 115
48 48
16 16
VDS201A14500 VDS201A14600
55.20 55.20
VDS401A14500 VDS401A14600
85.90 85.90
14,500 14,600
.5709 .5748
45 45
2,5 2,5
115 115
48 48
16 16
VDS201A14684 VDS201A14700
55.20 55.20
VDS401A14684 VDS401A14700
85.90 85.90
14,684 14,700
.5781 .5787
45 45
2,5 2,5
115 115
48 48
16 16
VDS201A14800 VDS201A14900
55.20 55.20
VDS401A14800 VDS401A14900
85.90 85.90
14,800 14,900
.5827 .5866
45 45
2,6 2,6
115 115
48 48
16 16
VDS201A15000 VDS201A15083
55.20 62.70
VDS401A15000 VDS401A15083
85.90 97.50
15,000 15,083
.5906 .5938
45 45
2,6 2,6
115 115
48 48
16 16
VDS201A15100 VDS201A15200
62.70 62.70
VDS401A15100 VDS401A15200
97.50 97.50
15,100 15,200
.5945 .5984
45 45
2,6 2,6
115 115
48 48
16 16
VDS201A15300 VDS201A15400
62.70 62.70
VDS401A15300 VDS401A15400
97.50 97.50
15,300 15,400
.6024 .6063
45 45
2,6 2,7
115 115
48 48
16 16
VDS201A15479 VDS201A15500
62.70 62.70
VDS401A15479 VDS401A15500
97.50 97.50
15,479 15,500
.6094 .6102
45 45
2,7 2,7
115 115
48 48
16 16
VDS201A15600 VDS201A15700
62.70 62.70
VDS401A15600 VDS401A15700
97.50 97.50
15,600 15,700
.6142 .6181
45 45
2,7 2,7
115 115
48 48
16 16
VDS201A15800 VDS201A15875
62.70 62.70
VDS401A15800 VDS401A15875
97.50 97.50
15,800 15,875
.6220 .6250
45 45
2,7 2,7
115 115
48 48
16 16
VDS201A15900 VDS201A16000
62.70 62.70
VDS401A15900 VDS401A16000
97.50 97.50
15,900 16,000
.6260 .6299
45 45
2,8 2,8
115 115
48 48
16 16
VDS201A16100 VDS201A16200
73.00 73.00
VDS401A16100 VDS401A16200
112.90 112.90
16,100 16,200
.6339 .6378
51 51
2,8 2,8
123 123
48 48
18 18
VDS201A16271 VDS201A16300
73.00 73.00
VDS401A16271 VDS401A16300
112.90 112.90
16,271 16,300
.6406 .6417
51 51
2,8 2,8
123 123
48 48
18 18
(continued)
20
WWW.WIDIA.COM
A-12-02996EN_me_WIDIA_SlimLine_Catalog.qxp:WIDIA
10/15/12
10:37 AM
Page 21
Solid Carbide Drills ™
VariDrill • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 3 x D (VDS201A/VDS401A • 3 x D continued)
VDS201A • WU25PD VDS201A16400 VDS201A16500
£ 73.00 73.00
VDS401A • WU25PD VDS401A16400 VDS401A16500
£ 112.90 112.90
D1 diameter mm in 16,400 .6457 16,500 .6496
VDS201A16600 VDS201A16670
73.00 73.00
VDS401A16600 VDS401A16670
112.90 112.90
16,600 16,670
VDS201A16700 VDS201A16800
73.00 73.00
VDS401A16700 VDS401A16800
112.90 112.90
VDS201A16900 VDS201A17000
73.00 73.00
VDS401A16900 VDS401A17000
VDS201A17100 VDS201A17200
87.40 87.40
VDS201A17300 VDS201A17400
L4 max 51 51
L5 2,8 2,9
L 123 123
LS 48 48
D 18 18
.6535 .6563
51 51
2,9 2,9
123 123
48 48
18 18
16,700 16,800
.6575 .6614
51 51
2,9 2,9
123 123
48 48
18 18
112.90 112.90
16,900 17,000
.6654 .6693
51 51
2,9 2,9
123 123
48 48
18 18
VDS401A17100 VDS401A17200
136.20 136.20
17,100 17,200
.6732 .6772
51 51
3,0 3,0
123 123
48 48
18 18
87.40 87.40
VDS401A17300 VDS401A17400
136.20 136.20
17,300 17,400
.6811 .6850
51 51
3,0 3,0
123 123
48 48
18 18
VDS201A17463 VDS201A17500
87.40 87.40
VDS401A17463 VDS401A17500
136.20 136.20
17,463 17,500
.6875 .6890
51 51
3,0 3,0
123 123
48 48
18 18
VDS201A17600 VDS201A17700
87.40 87.40
VDS401A17600 VDS401A17700
136.20 136.20
17,600 17,700
.6929 .6969
51 51
3,1 3,1
123 123
48 48
18 18
VDS201A17800 VDS201A17859
87.40 87.40
VDS401A17800 VDS401A17859
136.20 136.20
17,800 17,859
.7008 .7031
51 51
3,1 3,1
123 123
48 48
18 18
VDS201A17900 VDS201A18000
87.40 87.40
VDS401A17900 VDS401A18000
136.20 136.20
17,900 18,000
.7047 .7087
51 51
3,1 3,1
123 123
48 48
18 18
VDS201A18100 VDS201A18200
94.90 94.90
VDS401A18100 VDS401A18200
147.40 147.40
18,100 18,200
.7126 .7165
55 55
3,1 3,2
131 131
50 50
20 20
VDS201A18258 VDS201A18300
94.90 94.90
VDS401A18258 VDS401A18300
147.40 147.40
18,258 18,300
.7188 .7205
55 55
3,2 3,2
131 131
50 50
20 20
VDS201A18400 VDS201A18500
94.90 94.90
VDS401A18400 VDS401A18500
147.40 147.40
18,400 18,500
.7244 .7283
55 55
3,2 3,2
131 131
50 50
20 20
VDS201A18600 VDS201A18654
94.90 94.90
VDS401A18600 VDS401A18654
147.40 147.40
18,600 18,654
.7323 .7344
55 55
3,2 3,2
131 131
50 50
20 20
VDS201A18700 VDS201A18800
94.90 94.90
VDS401A18700 VDS401A18800
147.40 147.40
18,700 18,800
.7362 .7402
55 55
3,2 3,3
131 131
50 50
20 20
VDS201A18900 VDS201A19000
94.90 94.90
VDS401A18900 VDS401A19000
147.40 147.40
18,900 19,000
.7441 .7480
55 55
3,3 3,3
131 131
50 50
20 20
VDS201A19050 VDS201A19100
102.40 102.40
VDS401A19050 VDS401A19100
158.70 158.70
19,050 19,100
.7500 .7520
55 55
3,3 3,3
131 131
50 50
20 20
VDS201A19200 VDS201A19300
102.40 102.40
VDS401A19200 VDS401A19300
158.70 158.70
19,200 19,300
.7559 .7598
55 55
3,3 3,4
131 131
50 50
20 20
VDS201A19400 VDS201A19500
102.40 102.40
VDS401A19400 VDS401A19500
158.70 158.70
19,400 19,500
.7638 .7677
55 55
3,4 3,4
131 131
50 50
20 20
VDS201A19600 VDS201A19700
102.40 102.40
VDS401A19600 VDS401A19700
158.70 158.70
19,600 19,700
.7717 .7756
55 55
3,4 3,4
131 131
50 50
20 20
VDS201A19800 VDS201A19900
102.40 102.40
VDS401A19800 VDS401A19900
158.70 158.70
19,800 19,900
.7795 .7835
55 55
3,4 3,5
131 131
50 50
20 20
VDS201A20000
102.40
VDS401A20000
158.70
20,000
.7874
55
3,5
131
50
20
NOTE: L4 max, L5, L, LS, and D table columns reflect millimetre measurements.
WWW.WIDIA.COM
21
A-12-02996EN_me_WIDIA_SlimLine_Catalog.qxp:WIDIA
10/15/12
10:37 AM
Page 22
Solid Carbide Drills VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 5 x D
VDS202A/VDS402A • 5 x D
VDS202A • WU25PD VDS202A01000 VDS202A01016
£ 25.40 25.80
VDS402A • WU25PD — —
£ — —
D1 diameter mm in 1,000 .0394 1,016 .0400
VDS202A01041 VDS202A01067
25.80 25.80
— —
— —
1,041 1,067
VDS202A01092 VDS202A01100
25.80 25.80
— —
— —
VDS202A01181 VDS202A01191
25.80 25.80
— —
VDS202A01200 VDS202A01300
25.80 25.80
VDS202A01321 VDS202A01397
L4 max 6 6
L5 0,1 0,1
L 58 58
LS 28 28
D 4 4
.0410 .0420
6 6
0,2 0,2
58 58
28 28
4 4
1,092 1,100
.0430 .0433
6 6
0,2 0,2
58 58
28 28
4 4
— —
1,181 1,191
.0465 .0469
6 6
0,2 0,2
58 58
28 28
4 4
— —
— —
1,200 1,300
.0472 .0512
6 6
0,2 0,2
58 58
28 28
4 4
25.80 25.80
— —
— —
1,321 1,397
.0520 .0550
6 6
0,2 0,2
58 58
28 28
4 4
VDS202A01400 VDS202A01500
25.80 25.80
— VDS402A01500
— 34.80
1,400 1,500
.0551 .0591
6 9
0,2 0,2
58 58
28 28
4 4
VDS202A01600 VDS202A01700
25.80 25.80
VDS402A01600 VDS402A01700
34.80 34.80
1,600 1,700
.0630 .0669
9 9
0,2 0,3
58 58
28 28
4 4
VDS202A01800 VDS202A01900
25.80 25.80
VDS402A01800 VDS402A01900
34.80 34.80
1,800 1,900
.0709 .0748
9 9
0,3 0,3
58 58
28 28
4 4
VDS202A01984 VDS202A02000
25.80 25.80
VDS402A01984 VDS402A02000
34.80 34.80
1,984 2,000
.0781 .0787
14 14
0,3 0,3
58 58
28 28
4 4
VDS202A02100 VDS202A02200
26.30 26.30
VDS402A02100 VDS402A02200
35.50 35.50
2,100 2,200
.0827 .0866
14 14
0,3 0,3
58 58
28 28
4 4
VDS202A02300 VDS202A02383
26.30 26.30
VDS402A02300 VDS402A02383
35.50 35.50
2,300 2,383
.0906 .0938
14 17
0,4 0,4
58 58
28 28
4 4
VDS202A02400 VDS202A02439
26.30 26.30
VDS402A02400 VDS402A02439
35.50 35.50
2,400 2,439
.0945 .0960
17 17
0,4 0,4
58 58
28 28
4 4
VDS202A02489 VDS202A02500
26.30 26.30
VDS402A02489 VDS402A02500
35.50 35.50
2,489 2,500
.0980 .0984
17 17
0,4 0,4
58 58
28 28
4 4
VDS202A02578 VDS202A02600
26.30 26.30
VDS402A02578 VDS402A02600
35.50 35.50
2,578 2,600
.1015 .1024
17 17
0,4 0,4
58 58
28 28
4 4
VDS202A02642 VDS202A02700
26.30 26.30
VDS402A02642 VDS402A02700
35.50 35.50
2,642 2,700
.1040 .1063
17 17
0,4 0,4
58 58
28 28
4 4
VDS202A02705 VDS202A02779
26.30 26.30
VDS402A02705 VDS402A02779
35.50 35.50
2,705 2,779
.1065 .1094
17 17
0,4 0,4
58 58
28 28
4 4
VDS202A02800 VDS202A02820
26.30 26.30
VDS402A02800 VDS402A02820
35.50 35.50
2,800 2,820
.1102 .1110
17 17
0,5 0,5
58 58
28 28
4 4
VDS202A02870 VDS202A02900
26.30 26.30
VDS402A02870 VDS402A02900
35.50 35.50
2,870 2,900
.1130 .1142
17 17
0,5 0,5
58 58
28 28
4 4
VDS202A02947 VDS202A03000
26.30 26.30
VDS402A02947 VDS402A03000
35.50 35.50
2,947 3,000
.1160 .1181
17 23
0,5 0,5
58 66
28 36
4 6
(continued)
22
WWW.WIDIA.COM
A-12-02996EN_me_WIDIA_SlimLine_Catalog.qxp:WIDIA
10/15/12
10:37 AM
Page 23
Solid Carbide Drills ™
VariDrill • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 5 x D (VDS202A/VDS402A • 5 x D continued)
VDS202A • WU25PD VDS202A03048 VDS202A03100
£ 26.70 26.70
VDS402A • WU25PD VDS402A03048 VDS402A03100
£ 36.10 36.10
D1 diameter mm in 3,048 .1200 3,100 .1220
VDS202A03175 VDS202A03200
26.70 26.70
VDS402A03175 VDS402A03200
36.10 36.10
3,175 3,200
VDS202A03264 VDS202A03300
26.70 26.70
VDS402A03264 VDS402A03300
36.10 36.10
VDS202A03400 VDS202A03455
26.70 26.70
VDS402A03400 VDS402A03455
VDS202A03500 VDS202A03571
26.70 26.70
VDS202A03600 VDS202A03658
L4 max 23 23
L5 0,5 0,5
L 66 66
LS 36 36
D 6 6
.1250 .1260
23 23
0,5 0,5
66 66
36 36
6 6
3,264 3,300
.1285 .1299
23 23
0,5 0,5
66 66
36 36
6 6
36.10 36.10
3,400 3,455
.1339 .1360
23 23
0,6 0,6
66 66
36 36
6 6
VDS402A03500 VDS402A03571
36.10 36.10
3,500 3,571
.1378 .1406
23 23
0,6 0,6
66 66
36 36
6 6
26.70 26.70
VDS402A03600 VDS402A03658
36.10 36.10
3,600 3,658
.1417 .1440
23 23
0,6 0,6
66 66
36 36
6 6
VDS202A03700 VDS202A03734
26.70 26.70
VDS402A03700 VDS402A03734
36.10 36.10
3,700 3,734
.1457 .1470
23 23
0,6 0,6
66 66
36 36
6 6
VDS202A03800 VDS202A03900
26.70 26.70
VDS402A03800 VDS402A03900
36.10 36.10
3,800 3,900
.1496 .1535
29 29
0,6 0,6
74 74
36 36
6 6
VDS202A03970 VDS202A04000
26.70 26.70
VDS402A03970 VDS402A04000
36.10 36.10
3,970 4,000
.1563 .1575
29 29
0,7 0,7
74 74
36 36
6 6
VDS202A04039 VDS202A04090
27.20 27.20
VDS402A04039 VDS402A04090
37.40 37.40
4,039 4,090
.1590 .1610
29 29
0,7 0,7
74 74
36 36
6 6
VDS202A04100 VDS202A04200
27.20 27.20
VDS402A04100 VDS402A04200
37.40 37.40
4,100 4,200
.1614 .1654
29 29
0,7 0,7
74 74
36 36
6 6
VDS202A04217 VDS202A04300
27.20 27.20
VDS402A04217 VDS402A04300
37.40 37.40
4,217 4,300
.1660 .1693
29 29
0,7 0,7
74 74
36 36
6 6
VDS202A04366 VDS202A04400
27.20 27.20
VDS402A04366 VDS402A04400
37.40 37.40
4,366 4,400
.1719 .1732
29 29
0,7 0,7
74 74
36 36
6 6
VDS202A04500 VDS202A04600
27.20 27.20
VDS402A04500 VDS402A04600
37.40 37.40
4,500 4,600
.1772 .1811
29 29
0,7 0,8
74 74
36 36
6 6
VDS202A04623 VDS202A04700
27.20 27.20
VDS402A04623 VDS402A04700
37.40 37.40
4,623 4,700
.1820 .1850
29 29
0,8 0,8
74 74
36 36
6 6
VDS202A04763 VDS202A04800
27.20 27.20
VDS402A04763 VDS402A04800
37.40 37.40
4,763 4,800
.1875 .1890
35 35
0,8 0,8
82 82
36 36
6 6
VDS202A04852 VDS202A04900
27.20 27.20
VDS402A04852 VDS402A04900
37.40 37.40
4,852 4,900
.1910 .1929
35 35
0,8 0,8
82 82
36 36
6 6
VDS202A05000 VDS202A05100
27.20 27.20
VDS402A05000 VDS402A05100
37.40 38.10
5,000 5,100
.1969 .2008
35 35
0,8 0,8
82 82
36 36
6 6
VDS202A05106 VDS202A05159
27.20 27.20
VDS402A05106 VDS402A05159
38.10 38.10
5,106 5,159
.2010 .2031
35 35
0,8 0,9
82 82
36 36
6 6
VDS202A05200 VDS202A05300
27.20 27.20
VDS402A05200 VDS402A05300
38.10 38.10
5,200 5,300
.2047 .2087
35 35
0,9 0,9
82 82
36 36
6 6
VDS202A05400 VDS202A05410
27.20 27.20
VDS402A05400 VDS402A05410
38.10 38.10
5,400 5,410
.2126 .2130
35 35
0,9 0,9
82 82
36 36
6 6
VDS202A05500 VDS202A05558
27.20 27.20
VDS402A05500 VDS402A05558
38.10 38.10
5,500 5,558
.2165 .2188
35 35
0,9 0,9
82 82
36 36
6 6
(continued)
WWW.WIDIA.COM
23
A-12-02996EN_me_WIDIA_SlimLine_Catalog.qxp:WIDIA
10/15/12
10:37 AM
Page 24
Solid Carbide Drills VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 5 x D (VDS202A/VDS402A • 5 x D continued)
VDS202A • WU25PD VDS202A05600 VDS202A05616
£ 27.20 27.20
VDS402A • WU25PD VDS402A05600 VDS402A05616
£ 38.10 38.10
D1 diameter mm in 5,600 .2205 5,616 .2211
VDS202A05700 VDS202A05800
27.20 27.20
VDS402A05700 VDS402A05800
38.10 38.10
5,700 5,800
VDS202A05900 VDS202A05954
27.20 27.20
VDS402A05900 VDS402A05954
38.10 38.10
VDS202A06000 VDS202A06100
27.20 27.60
VDS402A06000 VDS402A06100
VDS202A06200 VDS202A06300
27.60 27.60
VDS202A06350 VDS202A06400
L4 max 35 35
L5 0,9 0,9
L 82 82
LS 36 36
D 6 6
.2244 .2283
35 35
1,0 1,0
82 82
36 36
6 6
5,900 5,954
.2323 .2344
35 35
1,0 1,0
82 82
36 36
6 6
38.10 41.50
6,000 6,100
.2362 .2402
35 43
1,0 1,0
82 91
36 36
6 8
VDS402A06200 VDS402A06300
41.50 41.50
6,200 6,300
.2441 .2480
43 43
1,0 1,1
91 91
36 36
8 8
27.60 27.60
VDS402A06350 VDS402A06400
41.50 41.50
6,350 6,400
.2500 .2520
43 43
1,1 1,1
91 91
36 36
8 8
VDS202A06500 VDS202A06528
27.60 27.60
VDS402A06500 VDS402A06528
41.50 41.50
6,500 6,528
.2559 .2570
43 43
1,1 1,1
91 91
36 36
8 8
VDS202A06600 VDS202A06630
27.60 27.60
VDS402A06600 VDS402A06630
41.50 41.50
6,600 6,630
.2598 .2610
43 43
1,1 1,1
91 91
36 36
8 8
VDS202A06700 VDS202A06746
27.60 27.60
VDS402A06700 VDS402A06746
41.50 41.50
6,700 6,746
.2638 .2656
43 43
1,1 1,1
91 91
36 36
8 8
VDS202A06800 VDS202A06900
27.60 27.60
VDS402A06800 VDS402A06900
41.50 41.50
6,800 6,900
.2677 .2717
43 43
1,1 1,2
91 91
36 36
8 8
VDS202A07000 VDS202A07100
28.60 28.60
VDS402A07000 VDS402A07100
41.50 44.40
7,000 7,100
.2756 .2795
43 43
1,2 1,2
91 91
36 36
8 8
VDS202A07145 VDS202A07200
28.60 28.60
VDS402A07145 VDS402A07200
44.40 44.40
7,145 7,200
.2813 .2835
43 43
1,2 1,2
91 91
36 36
8 8
VDS202A07300 VDS202A07400
28.60 28.60
VDS402A07300 VDS402A07400
44.40 44.40
7,300 7,400
.2874 .2913
43 43
1,2 1,3
91 91
36 36
8 8
VDS202A07500 VDS202A07541
28.60 28.60
VDS402A07500 VDS402A07541
44.40 44.40
7,500 7,541
.2953 .2969
43 43
1,3 1,3
91 91
36 36
8 8
VDS202A07600 VDS202A07700
28.60 28.60
VDS402A07600 VDS402A07700
44.40 44.40
7,600 7,700
.2992 .3031
43 43
1,3 1,3
91 91
36 36
8 8
VDS202A07800 VDS202A07900
28.60 28.60
VDS402A07800 VDS402A07900
44.40 44.40
7,800 7,900
.3071 .3110
43 43
1,3 1,3
91 91
36 36
8 8
VDS202A07938 VDS202A08000
28.60 28.60
VDS402A07938 VDS402A08000
44.40 44.40
7,938 8,000
.3125 .3150
43 43
1,3 1,4
91 91
36 36
8 8
VDS202A08100 VDS202A08200
31.40 31.40
VDS402A08100 VDS402A08200
48.60 48.60
8,100 8,200
.3189 .3228
49 49
1,4 1,4
103 103
40 40
10 10
VDS202A08300 VDS202A08334
31.40 31.40
VDS402A08300 VDS402A08334
48.60 48.60
8,300 8,334
.3268 .3281
49 49
1,4 1,4
103 103
40 40
10 10
VDS202A08400 VDS202A08433
31.40 31.40
VDS402A08400 VDS402A08433
48.60 48.60
8,400 8,433
.3307 .3320
49 49
1,4 1,4
103 103
40 40
10 10
VDS202A08500 VDS202A08600
31.40 31.40
VDS402A08500 VDS402A08600
48.60 48.60
8,500 8,600
.3346 .3386
49 49
1,4 1,5
103 103
40 40
10 10
VDS202A08700 VDS202A08733
31.40 31.40
VDS402A08700 VDS402A08733
48.60 48.60
8,700 8,733
.3425 .3438
49 49
1,5 1,5
103 103
40 40
10 10
VDS202A08800 VDS202A08900
31.40 31.40
VDS402A08800 VDS402A08900
48.60 48.60
8,800 8,900
.3465 .3504
49 49
1,5 1,5
103 103
40 40
10 10
(continued)
24
WWW.WIDIA.COM
A-12-02996EN_me_WIDIA_SlimLine_Catalog.qxp:WIDIA
10/15/12
10:37 AM
Page 25
Solid Carbide Drills ™
VariDrill • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 5 x D (VDS202A/VDS402A • 5 x D continued)
VDS202A • WU25PD VDS202A09000 VDS202A09100
£ 31.40 36.20
VDS402A • WU25PD VDS402A09000 VDS402A09100
£ 48.60 48.90
D1 diameter mm in 9,000 .3543 9,100 .3583
VDS202A09129 VDS202A09200
36.20 36.20
VDS402A09129 VDS402A09200
48.90 48.90
9,129 9,200
VDS202A09300 VDS202A09347
36.20 36.20
VDS402A09300 VDS402A09347
48.90 48.90
VDS202A09400 VDS202A09500
36.20 36.20
VDS402A09400 VDS402A09500
VDS202A09525 VDS202A09600
36.20 36.20
VDS202A09700 VDS202A09800
L4 max 49 49
L5 1,5 1,5
L 103 103
LS 40 40
D 10 10
.3594 .3622
49 49
1,6 1,6
103 103
40 40
10 10
9,300 9,347
.3661 .3680
49 49
1,6 1,6
103 103
40 40
10 10
48.90 48.90
9,400 9,500
.3701 .3740
49 49
1,6 1,6
103 103
40 40
10 10
VDS402A09525 VDS402A09600
48.90 48.90
9,525 9,600
.3750 .3780
49 49
1,6 1,6
103 103
40 40
10 10
36.20 36.20
VDS402A09700 VDS402A09800
48.90 48.90
9,700 9,800
.3819 .3858
49 49
1,7 1,7
103 103
40 40
10 10
VDS202A09900 VDS202A09921
36.20 36.20
VDS402A09900 VDS402A09921
48.90 48.90
9,900 9,921
.3898 .3906
49 49
1,7 1,7
103 103
40 40
10 10
VDS202A10000 VDS202A10100
36.20 41.50
VDS402A10000 VDS402A10100
48.90 64.30
10,000 10,100
.3937 .3976
49 56
1,7 1,7
103 118
40 45
10 12
VDS202A10200 VDS202A10300
41.50 41.50
VDS402A10200 VDS402A10300
64.30 64.30
10,200 10,300
.4016 .4055
56 56
1,7 1,8
118 118
45 45
12 12
VDS202A10320 VDS202A10400
41.50 41.50
VDS402A10320 VDS402A10400
64.30 64.30
10,320 10,400
.4063 .4094
56 56
1,8 1,8
118 118
45 45
12 12
VDS202A10500 VDS202A10600
41.50 41.50
VDS402A10500 VDS402A10600
64.30 64.30
10,500 10,600
.4134 .4173
56 56
1,8 1,8
118 118
45 45
12 12
VDS202A10700 VDS202A10716
41.50 41.50
VDS402A10700 VDS402A10716
64.30 64.30
10,700 10,716
.4213 .4219
56 56
1,8 1,8
118 118
45 45
12 12
VDS202A10800 VDS202A10900
41.50 41.50
VDS402A10800 VDS402A10900
64.30 64.30
10,800 10,900
.4252 .4291
56 56
1,8 1,9
118 118
45 45
12 12
VDS202A11000 VDS202A11100
41.50 43.30
VDS402A11000 VDS402A11100
64.30 67.20
11,000 11,100
.4331 .4370
56 56
1,9 1,9
118 118
45 45
12 12
VDS202A11113 VDS202A11200
43.30 43.30
VDS402A11113 VDS402A11200
67.20 67.20
11,113 11,200
.4375 .4409
56 56
1,9 1,9
118 118
45 45
12 12
VDS202A11300 VDS202A11400
43.30 43.30
VDS402A11300 VDS402A11400
67.20 67.20
11,300 11,400
.4449 .4488
56 56
1,9 2,0
118 118
45 45
12 12
VDS202A11500 VDS202A11509
43.30 43.30
VDS402A11500 VDS402A11509
67.20 67.20
11,500 11,509
.4528 .4531
56 56
2,0 2,0
118 118
45 45
12 12
VDS202A11600 VDS202A11700
43.30 43.30
VDS402A11600 VDS402A11700
67.20 67.20
11,600 11,700
.4567 .4606
56 56
2,0 2,0
118 118
45 45
12 12
VDS202A11800 VDS202A11900
43.30 43.30
VDS402A11800 VDS402A11900
67.20 67.20
11,800 11,900
.4646 .4685
56 56
2,0 2,0
118 118
45 45
12 12
VDS202A11908 VDS202A12000
43.30 43.30
VDS402A11908 VDS402A12000
67.20 67.20
11,908 12,000
.4688 .4724
56 56
2,0 2,1
118 118
45 45
12 12
VDS202A12100 VDS202A12200
58.20 58.20
VDS402A12100 VDS402A12200
90.00 90.00
12,100 12,200
.4764 .4803
60 60
2,1 2,1
124 124
45 45
14 14
VDS202A12300 VDS202A12304
58.20 58.20
VDS402A12300 VDS402A12304
90.00 90.00
12,300 12,304
.4843 .4844
60 60
2,1 2,1
124 124
45 45
14 14
VDS202A12400 VDS202A12500
58.20 58.20
VDS402A12400 VDS402A12500
90.00 90.00
12,400 12,500
.4882 .4921
60 60
2,1 2,1
124 124
45 45
14 14
(continued)
WWW.WIDIA.COM
25
A-12-02996EN_me_WIDIA_SlimLine_Catalog.qxp:WIDIA
10/15/12
10:37 AM
Page 26
Solid Carbide Drills VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 5 x D (VDS202A/VDS402A • 5 x D continued)
VDS202A • WU25PD VDS202A12600 VDS202A12700
£ 58.20 58.20
VDS402A • WU25PD VDS402A12600 VDS402A12700
£ 90.00 90.00
D1 diameter mm in 12,600 .4961 12,700 .5000
VDS202A12800 VDS202A12900
58.20 58.20
VDS402A12800 VDS402A12900
90.00 90.00
12,800 12,900
VDS202A13000 VDS202A13096
58.20 60.00
VDS402A13000 VDS402A13096
90.00 93.00
VDS202A13100 VDS202A13200
60.00 60.00
VDS402A13100 VDS402A13200
VDS202A13300 VDS202A13400
60.00 60.00
VDS202A13500 VDS202A13600
L4 max 60 60
L5 2,2 2,2
L 124 124
LS 45 45
D 14 14
.5039 .5079
60 60
2,2 2,2
124 124
45 45
14 14
13,000 13,096
.5118 .5156
60 60
2,2 2,3
124 124
45 45
14 14
93.00 93.00
13,100 13,200
.5157 .5197
60 60
2,3 2,3
124 124
45 45
14 14
VDS402A13300 VDS402A13400
93.00 93.00
13,300 13,400
.5236 .5276
60 60
2,3 2,3
124 124
45 45
14 14
60.00 60.00
VDS402A13500 VDS402A13600
93.00 93.00
13,500 13,600
.5315 .5354
60 60
2,3 2,3
124 124
45 45
14 14
VDS202A13700 VDS202A13800
60.00 60.00
VDS402A13700 VDS402A13800
93.00 93.00
13,700 13,800
.5394 .5433
60 60
2,4 2,4
124 124
45 45
14 14
VDS202A13891 VDS202A13900
60.00 60.00
VDS402A13891 VDS402A13900
93.00 93.00
13,891 13,900
.5469 .5472
60 60
2,4 2,4
124 124
45 45
14 14
VDS202A14000 VDS202A14100
60.00 69.20
VDS402A14000 VDS402A14100
93.00 107.30
14,000 14,100
.5512 .5551
60 63
2,4 2,4
124 133
45 48
14 16
VDS202A14200 VDS202A14288
69.20 69.20
VDS402A14200 VDS402A14288
107.30 107.30
14,200 14,288
.5591 .5625
63 63
2,5 2,5
133 133
48 48
16 16
VDS202A14300 VDS202A14400
69.20 69.20
VDS402A14300 VDS402A14400
107.30 107.30
14,300 14,400
.5630 .5669
63 63
2,5 2,5
133 133
48 48
16 16
VDS202A14500 VDS202A14600
69.20 69.20
VDS402A14500 VDS402A14600
107.30 107.30
14,500 14,600
.5709 .5748
63 63
2,5 2,5
133 133
48 48
16 16
VDS202A14684 VDS202A14700
69.20 69.20
VDS402A14684 VDS402A14700
107.30 107.30
14,684 14,700
.5781 .5787
63 63
2,5 2,5
133 133
48 48
16 16
VDS202A14800 VDS202A14900
69.20 69.20
VDS402A14800 VDS402A14900
107.30 107.30
14,800 14,900
.5827 .5866
63 63
2,6 2,6
133 133
48 48
16 16
VDS202A15000 VDS202A15083
69.20 78.40
VDS402A15000 VDS402A15083
107.30 121.20
15,000 15,083
.5906 .5938
63 63
2,6 2,6
133 133
48 48
16 16
VDS202A15100 VDS202A15200
78.40 78.40
VDS402A15100 VDS402A15200
121.20 121.20
15,100 15,200
.5945 .5984
63 63
2,6 2,6
133 133
48 48
16 16
VDS202A15300 VDS202A15400
78.40 78.40
VDS402A15300 VDS402A15400
121.20 121.20
15,300 15,400
.6024 .6063
63 63
2,6 2,7
133 133
48 48
16 16
VDS202A15479 VDS202A15500
78.40 78.40
VDS402A15479 VDS402A15500
121.20 121.20
15,479 15,500
.6094 .6102
63 63
2,7 2,7
133 133
48 48
16 16
VDS202A15600 VDS202A15700
78.40 78.40
VDS402A15600 VDS402A15700
121.20 121.20
15,600 15,700
.6142 .6181
63 63
2,7 2,7
133 133
48 48
16 16
VDS202A15800 VDS202A15875
78.40 78.40
VDS402A15800 VDS402A15875
121.20 121.20
15,800 15,875
.6220 .6250
63 63
2,7 2,7
133 133
48 48
16 16
VDS202A15900 VDS202A16000
78.40 78.40
VDS402A15900 VDS402A16000
121.20 121.20
15,900 16,000
.6260 .6299
63 63
2,8 2,8
133 133
48 48
16 16
VDS202A16100 VDS202A16200
91.20 91.20
VDS402A16100 VDS402A16200
141.40 141.40
16,100 16,200
.6339 .6378
71 71
2,8 2,8
143 143
48 48
18 18
VDS202A16271 VDS202A16300
91.20 91.20
VDS402A16271 VDS402A16300
141.40 141.40
16,271 16,300
.6406 .6417
71 71
2,8 2,8
143 143
48 48
18 18
(continued)
26
WWW.WIDIA.COM
A-12-02996EN_me_WIDIA_SlimLine_Catalog.qxp:WIDIA
10/15/12
10:37 AM
Page 27
Solid Carbide Drills ™
VariDrill • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 5 x D (VDS202A/VDS402A • 5 x D continued)
VDS202A • WU25PD VDS202A16400 VDS202A16500
£ 91.20 91.20
VDS402A • WU25PD VDS402A16400 VDS402A16500
£ 141.40 141.40
D1 diameter mm in 16,400 .6457 16,500 .6496
VDS202A16600 VDS202A16670
91.20 91.20
VDS402A16600 VDS402A16670
141.40 141.40
16,600 16,670
VDS202A16700 VDS202A16800
91.20 91.20
VDS402A16700 VDS402A16800
141.40 141.40
VDS202A16900 VDS202A17000
91.20 91.20
VDS402A16900 VDS402A17000
VDS202A17100 VDS202A17200
109.90 109.90
VDS202A17300 VDS202A17400
L4 max 71 71
L5 2,8 2,9
L 143 143
LS 48 48
D 18 18
.6535 .6563
71 71
2,9 2,9
143 143
48 48
18 18
16,700 16,800
.6575 .6614
71 71
2,9 2,9
143 143
48 48
18 18
141.40 141.40
16,900 17,000
.6654 .6693
71 71
2,9 2,9
143 143
48 48
18 18
VDS402A17100 VDS402A17200
169.90 169.90
17,100 17,200
.6732 .6772
71 71
3,0 3,0
143 143
48 48
18 18
109.90 109.90
VDS402A17300 VDS402A17400
169.90 169.90
17,300 17,400
.6811 .6850
71 71
3,0 3,0
143 143
48 48
18 18
VDS202A17463 VDS202A17500
109.90 109.90
VDS402A17463 VDS402A17500
169.90 169.90
17,463 17,500
.6875 .6890
71 71
3,0 3,0
143 143
48 48
18 18
VDS202A17600 VDS202A17700
109.90 109.90
VDS402A17600 VDS402A17700
169.90 169.90
17,600 17,700
.6929 .6969
71 71
3,1 3,1
143 143
48 48
18 18
VDS202A17800 VDS202A17859
109.90 109.90
VDS402A17800 VDS402A17859
169.90 169.90
17,800 17,859
.7008 .7031
71 71
3,1 3,1
143 143
48 48
18 18
VDS202A17900 VDS202A18000
109.90 109.90
VDS402A17900 VDS402A18000
169.90 169.90
17,900 18,000
.7047 .7087
71 71
3,1 3,1
143 143
48 48
18 18
VDS202A18100 VDS202A18200
119.30 119.30
VDS402A18100 VDS402A18200
184.20 184.20
18,100 18,200
.7126 .7165
77 77
3,1 3,2
153 153
50 50
20 20
VDS202A18258 VDS202A18300
119.30 119.30
VDS402A18258 VDS402A18300
184.20 184.20
18,258 18,300
.7188 .7205
77 77
3,2 3,2
153 153
50 50
20 20
VDS202A18400 VDS202A18500
119.30 119.30
VDS402A18400 VDS402A18500
184.20 184.20
18,400 18,500
.7244 .7283
77 77
3,2 3,2
153 153
50 50
20 20
VDS202A18600 VDS202A18654
119.30 119.30
VDS402A18600 VDS402A18654
184.20 184.20
18,600 18,654
.7323 .7344
77 77
3,2 3,2
153 153
50 50
20 20
VDS202A18700 VDS202A18800
119.30 119.30
VDS402A18700 VDS402A18800
184.20 184.20
18,700 18,800
.7362 .7402
77 77
3,2 3,3
153 153
50 50
20 20
VDS202A18900 VDS202A19000
119.30 119.30
VDS402A18900 VDS402A19000
184.20 184.20
18,900 19,000
.7441 .7480
77 77
3,3 3,3
153 153
50 50
20 20
VDS202A19050 VDS202A19100
128.30 128.30
VDS402A19050 VDS402A19100
198.40 198.40
19,050 19,100
.7500 .7520
77 77
3,3 3,3
153 153
50 50
20 20
VDS202A19200 VDS202A19300
128.30 128.30
VDS402A19200 VDS402A19300
198.40 198.40
19,200 19,300
.7559 .7598
77 77
3,3 3,4
153 153
50 50
20 20
VDS202A19400 VDS202A19500
128.30 128.30
VDS402A19400 VDS402A19500
198.40 198.40
19,400 19,500
.7638 .7677
77 77
3,4 3,4
153 153
50 50
20 20
VDS202A19600 VDS202A19700
128.30 128.30
VDS402A19600 VDS402A19700
198.40 198.40
19,600 19,700
.7717 .7756
77 77
3,4 3,4
153 153
50 50
20 20
VDS202A19800 VDS202A19900
128.30 128.30
VDS402A19800 VDS402A19900
198.40 198.40
19,800 19,900
.7795 .7835
77 77
3,4 3,5
153 153
50 50
20 20
VDS202A20000
128.30
VDS402A20000
198.40
20,000
.7874
77
3,5
153
50
20
NOTE: L4 max, L5, L, LS, and D table columns reflect millimetre measurements.
WWW.WIDIA.COM
27
A-12-02996EN_me_WIDIA_SlimLine_Catalog.qxp:WIDIA
10/15/12
10:37 AM
Page 28
Solid Carbide Drills VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 8 x D
VDS403A • 8 x D
D1 diameter VDS403A • WU25PD VDS403A01500 VDS403A01600
£ 55.80 55.80
mm 1,500 1,600
in .0591 .0630
L 58 58
L4 max 15 15
L5 0,2 0,2
LS 28 28
D 4 4
VDS403A01700 VDS403A01800
55.80 55.80
1,700 1,800
.0669 .0709
58 58
15 15
0,3 0,3
28 28
4 4
VDS403A01900 VDS403A01984
55.80 55.80
1,900 1,984
.0748 .0781
58 66
15 22
0,3 0,3
28 28
4 4
VDS403A02000 VDS403A02100
55.80 56.70
2,000 2,100
.0787 .0827
66 66
22 22
0,3 0,3
28 28
4 4
VDS403A02200 VDS403A02300
56.70 56.70
2,200 2,300
.0866 .0906
66 66
22 22
0,3 0,4
28 28
4 4
VDS403A02383 VDS403A02400
56.70 56.70
2,383 2,400
.0938 .0945
66 66
25 25
0,4 0,4
28 28
4 4
VDS403A02439 VDS403A02489
56.70 56.70
2,439 2,489
.0960 .0980
66 66
25 25
0,4 0,4
28 28
4 4
VDS403A02500 VDS403A02578
56.70 56.70
2,500 2,578
.0984 .1015
66 66
25 25
0,4 0,4
28 28
4 4
VDS403A02600 VDS403A02642
56.70 56.70
2,600 2,642
.1024 .1040
66 66
25 25
0,4 0,4
28 28
4 4
VDS403A02700 VDS403A02705
56.70 56.70
2,700 2,705
.1063 .1065
66 66
25 25
0,4 0,4
28 28
4 4
VDS403A02779 VDS403A02800
56.70 56.70
2,779 2,800
.1094 .1102
66 66
25 25
0,4 0,5
28 28
4 4
VDS403A02820 VDS403A02870
56.70 56.70
2,820 2,870
.1110 .1130
66 66
25 25
0,5 0,5
28 28
4 4
VDS403A02900 VDS403A02947
56.70 56.70
2,900 2,947
.1142 .1160
66 66
25 25
0,5 0,5
28 28
4 4
VDS403A03000 VDS403A03048
56.70 57.70
3,000 3,048
.1181 .1200
78 78
33 33
0,5 0,5
36 36
6 6
VDS403A03100 VDS403A03175
57.70 57.70
3,100 3,175
.1220 .1250
78 78
33 33
0,5 0,5
36 36
6 6
VDS403A03200 VDS403A03264
57.70 57.70
3,200 3,264
.1260 .1285
78 78
33 33
0,5 0,5
36 36
6 6
VDS403A03300 VDS403A03400
57.70 57.70
3,300 3,400
.1299 .1339
78 78
33 33
0,5 0,6
36 36
6 6
VDS403A03455 VDS403A03500
57.70 57.70
3,455 3,500
.1360 .1378
78 78
33 33
0,6 0,6
36 36
6 6
VDS403A03571 VDS403A03600
57.70 57.70
3,571 3,600
.1406 .1417
78 78
33 33
0,6 0,6
36 36
6 6
VDS403A03658 VDS403A03700
57.70 57.70
3,658 3,700
.1440 .1457
78 78
33 33
0,6 0,6
36 36
6 6
(continued)
28
WWW.WIDIA.COM
A-12-02996EN_me_WIDIA_SlimLine_Catalog.qxp:WIDIA
10/15/12
10:37 AM
Page 29
Solid Carbide Drills ™
VariDrill • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 8 x D (VDS403A • 8 x D continued)
D1 diameter VDS403A • WU25PD VDS403A03734 VDS403A03800
£ 57.70 57.70
mm 3,734 3,800
in .1470 .1496
L 78 87
L4 max 33 41
L5 0,6 0,6
LS 36 36
D 6 6
VDS403A03900 VDS403A03970
57.70 57.70
3,900 3,970
.1535 .1563
87 87
41 41
0,6 0,7
36 36
6 6
VDS403A04000 VDS403A04039
57.70 59.80
4,000 4,039
.1575 .1590
87 87
41 41
0,7 0,7
36 36
6 6
VDS403A04090 VDS403A04100
59.80 59.80
4,090 4,100
.1610 .1614
87 87
41 41
0,7 0,7
36 36
6 6
VDS403A04200 VDS403A04217
59.80 59.80
4,200 4,217
.1654 .1660
87 87
41 41
0,7 0,7
36 36
6 6
VDS403A04300 VDS403A04366
59.80 59.80
4,300 4,366
.1693 .1719
87 87
41 41
0,7 0,7
36 36
6 6
VDS403A04400 VDS403A04500
59.80 59.80
4,400 4,500
.1732 .1772
87 87
41 41
0,7 0,7
36 36
6 6
VDS403A04600 VDS403A04623
59.80 59.80
4,600 4,623
.1811 .1820
87 87
41 41
0,8 0,8
36 36
6 6
VDS403A04700 VDS403A04763
59.80 59.80
4,700 4,763
.1850 .1875
87 94
41 48
0,8 0,8
36 36
6 6
VDS403A04800 VDS403A04852
59.80 59.80
4,800 4,852
.1890 .1910
94 94
48 48
0,8 0,8
36 36
6 6
VDS403A04900 VDS403A05000
59.80 59.80
4,900 5,000
.1929 .1969
94 94
48 48
0,8 0,8
36 36
6 6
VDS403A05100 VDS403A05106
60.90 60.90
5,100 5,106
.2008 .2010
94 94
48 48
0,8 0,8
36 36
6 6
VDS403A05159 VDS403A05200
60.90 60.90
5,159 5,200
.2031 .2047
94 94
48 48
0,9 0,9
36 36
6 6
VDS403A05300 VDS403A05400
60.90 60.90
5,300 5,400
.2087 .2126
94 94
48 48
0,9 0,9
36 36
6 6
VDS403A05410 VDS403A05500
60.90 60.90
5,410 5,500
.2130 .2165
94 94
48 48
0,9 0,9
36 36
6 6
VDS403A05558 VDS403A05600
60.90 60.90
5,558 5,600
.2188 .2205
94 94
48 48
0,9 0,9
36 36
6 6
VDS403A05616 VDS403A05700
60.90 60.90
5,616 5,700
.2211 .2244
94 94
48 48
0,9 1,0
36 36
6 6
VDS403A05800 VDS403A05900
60.90 60.90
5,800 5,900
.2283 .2323
94 94
48 48
1,0 1,0
36 36
6 6
VDS403A05954 VDS403A06000
60.90 60.90
5,954 6,000
.2344 .2362
94 94
48 48
1,0 1,0
36 36
6 6
VDS403A06100 VDS403A06200
66.30 66.30
6,100 6,200
.2402 .2441
105 105
57 57
1,0 1,0
36 36
8 8
VDS403A06300 VDS403A06350
66.30 66.30
6,300 6,350
.2480 .2500
105 105
57 57
1,1 1,1
36 36
8 8
VDS403A06400 VDS403A06500
66.30 66.30
6,400 6,500
.2520 .2559
105 105
57 57
1,1 1,1
36 36
8 8
(continued)
WWW.WIDIA.COM
29
A-12-02996EN_me_WIDIA_SlimLine_Catalog.qxp:WIDIA
10/15/12
10:38 AM
Page 30
Solid Carbide Drills VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 8 x D (VDS403A • 8 x D continued)
D1 diameter VDS403A • WU25PD VDS403A06528 VDS403A06600
£ 66.30 66.30
mm 6,528 6,600
in .2570 .2598
L 105 105
L4 max 57 57
L5 1,1 1,1
LS 36 36
D 8 8
VDS403A06630 VDS403A06700
66.30 66.30
6,630 6,700
.2610 .2638
105 105
57 57
1,1 1,1
36 36
8 8
VDS403A06746 VDS403A06800
66.30 66.30
6,746 6,800
.2656 .2677
105 105
57 57
1,1 1,1
36 36
8 8
VDS403A06900 VDS403A07000
66.30 66.30
6,900 7,000
.2717 .2756
105 105
57 57
1,2 1,2
36 36
8 8
VDS403A07100 VDS403A07145
70.90 70.90
7,100 7,145
.2795 .2813
110 110
61 61
1,2 1,2
36 36
8 8
VDS403A07200 VDS403A07300
70.90 70.90
7,200 7,300
.2835 .2874
110 110
61 61
1,2 1,2
36 36
8 8
VDS403A07400 VDS403A07500
70.90 70.90
7,400 7,500
.2913 .2953
110 110
61 61
1,3 1,3
36 36
8 8
VDS403A07541 VDS403A07600
70.90 70.90
7,541 7,600
.2969 .2992
110 110
61 61
1,3 1,3
36 36
8 8
VDS403A07700 VDS403A07800
70.90 70.90
7,700 7,800
.3031 .3071
110 110
61 61
1,3 1,3
36 36
8 8
VDS403A07900 VDS403A07938
70.90 70.90
7,900 7,938
.3110 .3125
110 110
61 61
1,3 1,3
36 36
8 8
VDS403A08000 VDS403A08100
70.90 77.70
8,000 8,100
.3150 .3189
110 122
61 68
1,4 1,4
36 40
8 10
VDS403A08200 VDS403A08300
77.70 77.70
8,200 8,300
.3228 .3268
122 122
68 68
1,4 1,4
40 40
10 10
VDS403A08334 VDS403A08400
77.70 77.70
8,334 8,400
.3281 .3307
122 122
68 68
1,4 1,4
40 40
10 10
VDS403A08433 VDS403A08500
77.70 77.70
8,433 8,500
.3320 .3346
122 122
68 68
1,4 1,4
40 40
10 10
VDS403A08600 VDS403A08700
77.70 77.70
8,600 8,700
.3386 .3425
122 122
68 68
1,5 1,5
40 40
10 10
VDS403A08733 VDS403A08800
77.70 77.70
8,733 8,800
.3438 .3465
122 122
68 68
1,5 1,5
40 40
10 10
VDS403A08900 VDS403A09000
77.70 77.70
8,900 9,000
.3504 .3543
122 122
68 68
1,5 1,5
40 40
10 10
VDS403A09100 VDS403A09129
88.20 88.20
9,100 9,129
.3583 .3594
122 122
68 68
1,5 1,6
40 40
10 10
VDS403A09200 VDS403A09300
88.20 88.20
9,200 9,300
.3622 .3661
122 122
68 68
1,6 1,6
40 40
10 10
VDS403A09347 VDS403A09400
88.20 88.20
9,347 9,400
.3680 .3701
122 122
68 68
1,6 1,6
40 40
10 10
VDS403A09500 VDS403A09525
88.20 88.20
9,500 9,525
.3740 .3750
122 122
68 68
1,6 1,6
40 40
10 10
VDS403A09600 VDS403A09700
88.20 88.20
9,600 9,700
.3780 .3819
122 122
68 68
1,6 1,7
40 40
10 10
VDS403A09800 VDS403A09900
88.20 88.20
9,800 9,900
.3858 .3898
122 122
68 68
1,7 1,7
40 40
10 10
(continued)
30
WWW.WIDIA.COM
A-12-02996EN_me_WIDIA_SlimLine_Catalog.qxp:WIDIA
10/15/12
10:38 AM
Page 31
Solid Carbide Drills ™
VariDrill • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 8 x D (VDS403A • 8 x D continued)
D1 diameter VDS403A • WU25PD VDS403A09921 VDS403A10000
£ 88.20 88.20
mm 9,921 10,000
in .3906 .3937
L 122 122
L4 max 68 68
L5 1,7 1,7
LS 40 40
D 10 10
VDS403A10100 VDS403A10200
102.80 102.80
10,100 10,200
.3976 .4016
141 141
79 79
1,7 1,7
45 45
12 12
VDS403A10300 VDS403A10320
102.80 102.80
10,300 10,320
.4055 .4063
141 141
79 79
1,8 1,8
45 45
12 12
VDS403A10400 VDS403A10500
102.80 102.80
10,400 10,500
.4094 .4134
141 141
79 79
1,8 1,8
45 45
12 12
VDS403A10600 VDS403A10700
102.80 102.80
10,600 10,700
.4173 .4213
141 141
79 79
1,8 1,8
45 45
12 12
VDS403A10716 VDS403A10800
102.80 102.80
10,716 10,800
.4219 .4252
141 141
79 79
1,8 1,8
45 45
12 12
VDS403A10900 VDS403A11000
102.80 102.80
10,900 11,000
.4291 .4331
141 141
79 79
1,9 1,9
45 45
12 12
VDS403A11100 VDS403A11113
107.30 107.30
11,100 11,113
.4370 .4375
141 141
79 79
1,9 1,9
45 45
12 12
VDS403A11200 VDS403A11300
107.30 107.30
11,200 11,300
.4409 .4449
141 141
79 79
1,9 1,9
45 45
12 12
VDS403A11400 VDS403A11500
107.30 107.30
11,400 11,500
.4488 .4528
141 141
79 79
2,0 2,0
45 45
12 12
VDS403A11509 VDS403A11600
107.30 107.30
11,509 11,600
.4531 .4567
141 141
79 79
2,0 2,0
45 45
12 12
VDS403A11700 VDS403A11800
107.30 107.30
11,700 11,800
.4606 .4646
141 141
79 79
2,0 2,0
45 45
12 12
VDS403A11900 VDS403A11908
107.30 107.30
11,900 11,908
.4685 .4688
141 141
79 79
2,0 2,0
45 45
12 12
VDS403A12000 VDS403A12100
107.30 144.40
12,000 12,100
.4724 .4764
141 155
79 91
2,1 2,1
45 45
12 14
VDS403A12200 VDS403A12300
144.40 144.40
12,200 12,300
.4803 .4843
155 155
91 91
2,1 2,1
45 45
14 14
VDS403A12304 VDS403A12400
144.40 144.40
12,304 12,400
.4844 .4882
155 155
91 91
2,1 2,1
45 45
14 14
VDS403A12500 VDS403A12600
144.40 144.40
12,500 12,600
.4921 .4961
155 155
91 91
2,1 2,2
45 45
14 14
VDS403A12700 VDS403A12800
144.40 144.40
12,700 12,800
.5000 .5039
155 155
91 91
2,2 2,2
45 45
14 14
VDS403A12900 VDS403A13000
144.40 144.40
12,900 13,000
.5079 .5118
155 155
91 91
2,2 2,2
45 45
14 14
VDS403A13096 VDS403A13100
148.50 148.50
13,096 13,100
.5156 .5157
155 155
91 91
2,3 2,3
45 45
14 14
VDS403A13200 VDS403A13300
148.50 148.50
13,200 13,300
.5197 .5236
155 155
91 91
2,3 2,3
45 45
14 14
VDS403A13400 VDS403A13500
148.50 148.50
13,400 13,500
.5276 .5315
155 155
91 91
2,3 2,3
45 45
14 14
VDS403A13600 VDS403A13700
148.50 148.50
13,600 13,700
.5354 .5394
155 155
91 91
2,3 2,4
45 45
14 14
(continued)
WWW.WIDIA.COM
31
A-12-02996EN_me_WIDIA_SlimLine_Catalog.qxp:WIDIA
10/15/12
10:38 AM
Page 32
Solid Carbide Drills VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 8 x D (VDS403A • 8 x D continued)
VDS403A • WU25PD VDS403A13800 VDS403A13891
£ 148.50 148.50
D1 diameter mm in 13,800 .5433 13,891 .5469
L 155 155
L4 max 91 91
L5 2,4 2,4
LS 45 45
D 14 14
VDS403A13900 VDS403A14000
148.50 148.50
13,900 14,000
.5472 .5512
155 155
91 91
2,4 2,4
45 45
14 14
VDS403A14100 VDS403A14200
171.40 171.40
14,100 14,200
.5551 .5591
171 171
101 101
2,4 2,5
48 48
16 16
VDS403A14288 VDS403A14300
171.40 171.40
14,288 14,300
.5625 .5630
171 171
101 101
2,5 2,5
48 48
16 16
VDS403A14400 VDS403A14500
171.40 171.40
14,400 14,500
.5669 .5709
171 171
101 101
2,5 2,5
48 48
16 16
VDS403A14600 VDS403A14684
171.40 171.40
14,600 14,684
.5748 .5781
171 171
101 101
2,5 2,5
48 48
16 16
VDS403A14700 VDS403A14800
171.40 171.40
14,700 14,800
.5787 .5827
171 171
101 101
2,5 2,6
48 48
16 16
VDS403A14900 VDS403A15000
171.40 171.40
14,900 15,000
.5866 .5906
171 171
101 101
2,6 2,6
48 48
16 16
VDS403A15083 VDS403A15100
193.90 193.90
15,083 15,100
.5938 .5945
171 171
101 101
2,6 2,6
48 48
16 16
VDS403A15200 VDS403A15300
193.90 193.90
15,200 15,300
.5984 .6024
171 171
101 101
2,6 2,6
48 48
16 16
VDS403A15400 VDS403A15479
193.90 193.90
15,400 15,479
.6063 .6094
171 171
101 101
2,7 2,7
48 48
16 16
VDS403A15500 VDS403A15600
193.90 193.90
15,500 15,600
.6102 .6142
171 171
101 101
2,7 2,7
48 48
16 16
VDS403A15700 VDS403A15800
193.90 193.90
15,700 15,800
.6181 .6220
171 171
101 101
2,7 2,7
48 48
16 16
VDS403A15875 VDS403A15900
193.90 193.90
15,875 15,900
.6250 .6260
171 171
101 101
2,7 2,8
48 48
16 16
VDS403A16000 VDS403A16100
193.90 226.20
16,000 16,100
.6299 .6339
171 185
101 113
2,8 2,8
48 48
16 18
VDS403A16200 VDS403A16271
226.20 226.20
16,200 16,271
.6378 .6406
185 185
113 113
2,8 2,8
48 48
18 18
VDS403A16300 VDS403A16400
226.20 226.20
16,300 16,400
.6417 .6457
185 185
113 113
2,8 2,8
48 48
18 18
VDS403A16500 VDS403A16600
226.20 226.20
16,500 16,600
.6496 .6535
185 185
113 113
2,9 2,9
48 48
18 18
VDS403A16670 VDS403A16700
226.20 226.20
16,670 16,700
.6563 .6575
185 185
113 113
2,9 2,9
48 48
18 18
VDS403A16800 VDS403A16900
226.20 226.20
16,800 16,900
.6614 .6654
185 185
113 113
2,9 2,9
48 48
18 18
VDS403A17000 VDS403A17100
226.20 271.90
17,000 17,100
.6693 .6732
185 185
113 113
2,9 3,0
48 48
18 18
VDS403A17200 VDS403A17300
271.90 271.90
17,200 17,300
.6772 .6811
185 185
113 113
3,0 3,0
48 48
18 18
VDS403A17400 VDS403A17463
271.90 271.90
17,400 17,463
.6850 .6875
185 185
113 113
3,0 3,0
48 48
18 18
(continued)
32
WWW.WIDIA.COM
A-12-02996EN_me_WIDIA_SlimLine_Catalog.qxp:WIDIA
10/15/12
10:38 AM
Page 33
Solid Carbide Drills ™
VariDrill • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 8 x D (VDS403A • 8 x D continued)
VDS403A • WU25PD VDS403A17500 VDS403A17600
£ 271.90 271.90
D1 diameter mm in 17,500 .6890 17,600 .6929
L 185 185
L4 max 113 113
L5 3,0 3,1
LS 48 48
D 18 18
VDS403A17700 VDS403A17800
271.90 271.90
17,700 17,800
.6969 .7008
185 185
113 113
3,1 3,1
48 48
18 18
VDS403A17859 VDS403A17900
271.90 271.90
17,859 17,900
.7031 .7047
185 185
113 113
3,1 3,1
48 48
18 18
VDS403A18000 VDS403A18100
271.90 294.80
18,000 18,100
.7087 .7126
185 200
113 124
3,1 3,1
48 50
18 20
VDS403A18200 VDS403A18258
294.80 294.80
18,200 18,258
.7165 .7188
200 200
124 124
3,2 3,2
50 50
20 20
VDS403A18300 VDS403A18400
294.80 294.80
18,300 18,400
.7205 .7244
200 200
124 124
3,2 3,2
50 50
20 20
VDS403A18500 VDS403A18600
294.80 294.80
18,500 18,600
.7283 .7323
200 200
124 124
3,2 3,2
50 50
20 20
VDS403A18654 VDS403A18700
294.80 294.80
18,654 18,700
.7344 .7362
200 200
124 124
3,2 3,2
50 50
20 20
VDS403A18800 VDS403A18900
294.80 294.80
18,800 18,900
.7402 .7441
200 200
124 124
3,3 3,3
50 50
20 20
VDS403A19000 VDS403A19050
294.80 317.70
19,000 19,050
.7480 .7500
200 200
124 124
3,3 3,3
50 50
20 20
VDS403A19100 VDS403A19200
317.70 317.70
19,100 19,200
.7520 .7559
200 200
124 124
3,3 3,3
50 50
20 20
VDS403A19300 VDS403A19400
317.70 317.70
19,300 19,400
.7598 .7638
200 200
124 124
3,4 3,4
50 50
20 20
VDS403A19500 VDS403A19600
317.70 317.70
19,500 19,600
.7677 .7717
200 200
124 124
3,4 3,4
50 50
20 20
VDS403A19700 VDS403A19800
317.70 317.70
19,700 19,800
.7756 .7795
200 200
124 124
3,4 3,4
50 50
20 20
VDS403A19900 VDS403A20000
317.70 317.70
19,900 20,000
.7835 .7874
200 200
124 124
3,5 3,5
50 50
20 20
NOTE: L4 max, L5, L, LS, and D table columns reflect millimetre measurements.
WWW.WIDIA.COM
33
A-12-02996EN_me_WIDIA_SlimLine_Catalog.qxp:WIDIA
10/15/12
10:38 AM
Page 34
Solid Carbide Drills VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • Speed and Feed Charts VariDrill • VDS2_ Series • WU25PD • Flood Coolant • Metric
Cutting Speed — vc Range — m/min
P
M
K
N
S
Group 1 2, 3, 4, 6, 7 5, 9, 10, 11 12, 13 14.1 14.3 14.2, 14.4 15, 16 17, 18, 19 20 21 22, 23, 24 25 26, 27, 28 31, 32 33, 34, 35 36 37
min 60 50 50 30 30 40 30 70 90 80 90 90 90 90 20 10 20 20
– – – – – – – – – – – – – – – – – –
max 100 90 100 60 50 60 50 150 120 120 270 270 225 270 30 30 40 50
Recommended Feed Rate (fz) Tool Diameter mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r
1,0 0,04 – 0,09 0,05 – 0,10 0,05 – 0,10 0,03 – 0,05 0,02 – 0,05 0,02 – 0,06 0,02 – 0,05 0,06 – 0,13 0,08 – 0,11 0,04 – 0,10 0,05 – 0,12 0,04 – 0,08 0,10 – 0,13 0,04 – 0,08 0,01 – 0,04 0,01 – 0,03 0,01 – 0,03 0,01 – 0,03
2,0 0,05 – 0,12 0,06 – 0,13 0,06 – 0,13 0,04 – 0,06 0,03 – 0,06 0,03 – 0,07 0,03 – 0,06 0,07 – 0,14 0,09 – 0,12 0,06 – 0,12 0,06 – 0,13 0,06 – 0,12 0,11 – 0,14 0,06 – 0,12 0,02 – 0,05 0,02 – 0,03 0,02 – 0,03 0,02 – 0,03
3,0 0,07 – 0,14 0,08 – 0,15 0,07 – 0,15 0,05 – 0,08 0,04 – 0,07 0,04 – 0,08 0,04 – 0,07 0,09 – 0,18 0,10 – 0,13 0,06 – 0,14 0,08 – 0,14 0,08 – 0,16 0,12 – 0,14 0,08 – 0,16 0,03 – 0,06 0,02 – 0,04 0,02 – 0,04 0,02 – 0,04
4,0 0,08 – 0,16 0,09 – 0,17 0,08 – 0,17 0,06 – 0,10 0,05 – 0,09 0,06 – 0,10 0,06 – 0,09 0,10 – 0,19 0,10 – 0,15 0,07 – 0,15 0,10 – 0,16 0,10 – 0,20 0,13 – 0,16 0,10 – 0,20 0,04 – 0,08 0,03 – 0,06 0,02 – 0,05 0,03 – 0,06
6,0 0,11 – 0,22 0,13 – 0,23 0,12 – 0,23 0,08 – 0,14 0,08 – 0,11 0,08 – 0,12 0,08 – 0,11 0,13 – 0,25 0,13 – 0,20 0,10 – 0,20 0,12 – 0,20 0,12 – 0,24 0,14 – 0,20 0,12 – 0,24 0,06 – 0,10 0,05 – 0,08 0,04 – 0,07 0,05 – 0,08
8,0 0,13 – 0,26 0,15 – 0,28 0,14 – 0,28 0,10 – 0,18 0,09 – 0,12 0,09 – 0,14 0,09 – 0,12 0,16 – 0,30 0,16 – 0,25 0,11 – 0,24 0,16 – 0,24 0,16 – 0,28 0,16 – 0,24 0,16 – 0,28 0,08 – 0,12 0,07 – 0,10 0,06 – 0,09 0,07 – 0,10
10,0 0,15 – 0,31 0,19 – 0,33 0,17 – 0,33 0,13 – 0,22 0,10 – 0,14 0,10 – 0,16 0,10 – 0,14 0,18 – 0,35 0,18 – 0,29 0,14 – 0,28 0,20 – 0,28 0,20 – 0,32 0,20 – 0,28 0,20 – 0,32 0,09 – 0,13 0,08 – 0,11 0,07 – 0,10 0,08 – 0,11
12,0 0,18 – 0,35 0,22 – 0,38 0,19 – 0,38 0,14 – 0,24 0,12 – 0,16 0,12 – 0,18 0,12 – 0,16 0,20 – 0,39 0,20 – 0,32 0,15 – 0,32 0,24 – 0,32 0,24 – 0,36 0,24 – 0,32 0,24 – 0,36 0,10 – 0,14 0,09 – 0,12 0,08 – 0,11 0,09 – 0,12
16,0 0,22 – 0,42 0,26 – 0,47 0,23 – 0,47 0,18 – 0,32 0,14 – 0,18 0,14 – 0,20 0,14 – 0,18 0,25 – 0,48 0,25 – 0,38 0,19 – 0,38 0,28 – 0,40 0,28 – 0,44 0,28 – 0,40 0,28 – 0,40 0,12 – 0,16 0,10 – 0,14 0,09 – 0,13 0,10 – 0,14
20,0 0,28 – 0,54 0,34 – 0,59 0,29 – 0,59 0,23 – 0,41 0,16 – 0,20 0,16 – 0,22 0,16 – 0,20 0,30 – 0,59 0,30 – 0,48 0,24 – 0,48 0,32 – 0,48 0,32 – 0,52 0,32 – 0,44 0,32 – 0,48 0,14 – 0,18 0,11 – 0,16 0,10 – 0,15 0,11 – 0,16
10,0 0,15 – 0,31 0,19 – 0,33 0,17 – 0,33 0,13 – 0,22 0,10 – 0,14 0,10 – 0,16 0,10 – 0,14 0,21 – 0,40 0,21 – 0,32 0,15 – 0,32 0,20 – 0,28 0,20 – 0,32 0,20 – 0,28 0,20 – 0,32 0,09 – 0,13 0,08 – 0,11 0,07 – 0,10 0,08 – 0,11
12,0 0,18 – 0,35 0,22 – 0,38 0,19 – 0,38 0,14 – 0,24 0,12 – 0,16 0,12 – 0,18 0,12 – 0,16 0,23 – 0,44 0,23 – 0,36 0,17 – 0,36 0,24 – 0,32 0,24 – 0,36 0,24 – 0,32 0,24 – 0,36 0,10 – 0,14 0,09 – 0,12 0,08 – 0,11 0,09 – 0,12
16,0 0,22 – 0,42 0,26 – 0,47 0,23 – 0,47 0,18 – 0,32 0,14 – 0,18 0,14 – 0,20 0,14 – 0,18 0,28 – 0,54 0,28 – 0,43 0,22 – 0,43 0,28 – 0,40 0,28 – 0,44 0,28 – 0,40 0,28 – 0,40 0,12 – 0,16 0,10 – 0,14 0,09 – 0,13 0,10 – 0,14
20,0 0,28 – 0,54 0,34 – 0,59 0,29 – 0,59 0,23 – 0,41 0,16 – 0,20 0,16 – 0,22 0,16 – 0,20 0,34 – 0,67 0,34 – 0,54 0,27 – 0,54 0,32 – 0,48 0,32 – 0,52 0,32 – 0,44 0,32 – 0,48 0,14 – 0,18 0,11 – 0,16 0,10 – 0,15 0,11 – 0,16
VariDrill • VDS4_ Series • WU25PD • Through Coolant • Metric
Cutting Speed – vc Range – m/min
P
M
K
N
S
34
Group 1 2, 3, 4, 6, 7 5, 9, 10, 11 12, 13 14.1 14.3 14.2, 14.4 15, 16 17, 18, 19 20 21 22, 23, 24 25 26, 27, 28 31, 32 33, 34, 35 36 37
min 70 60 50 40 30 40 30 80 90 80 90 90 90 90 20 10 10 10
– – – – – – – – – – – – – – – – – –
max 140 100 100 70 50 60 50 160 140 130 315 270 270 270 30 30 40 40
Recommended Feed Rate (fz) Tool Diameter mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r
1,0 0,04 – 0,09 0,05 – 0,10 0,05 – 0,10 0,03 – 0,05 0,02 – 0,05 0,02 – 0,06 0,02 – 0,05 0,07 – 0,14 0,09 – 0,13 0,05 – 0,12 0,05 – 0,12 0,04 – 0,08 0,10 – 0,13 0,04 – 0,08 0,01 – 0,04 0,01 – 0,03 0,01 – 0,03 0,01 – 0,03
2,0 0,05 – 0,12 0,06 – 0,13 0,06 – 0,13 0,04 – 0,06 0,03 – 0,06 0,03 – 0,07 0,03 – 0,06 0,08 – 0,15 0,10 – 0,14 0,06 – 0,14 0,06 – 0,13 0,06 – 0,12 0,11 – 0,14 0,06 – 0,12 0,02 – 0,05 0,02 – 0,03 0,02 – 0,03 0,02 – 0,03
3,0 0,07 – 0,14 0,08 – 0,15 0,07 – 0,15 0,05 – 0,08 0,04 – 0,07 0,04 – 0,08 0,04 – 0,07 0,10 – 0,20 0,11 – 0,14 0,07 – 0,15 0,08 – 0,14 0,08 – 0,16 0,12 – 0,14 0,08 – 0,16 0,03 – 0,06 0,02 – 0,04 0,02 – 0,04 0,02 – 0,04
4,0 0,08 – 0,16 0,09 – 0,17 0,08 – 0,17 0,06 – 0,10 0,05 – 0,09 0,06 – 0,10 0,06 – 0,09 0,11 – 0,22 0,12 – 0,17 0,08 – 0,17 0,10 – 0,16 0,10 – 0,20 0,13 – 0,16 0,10 – 0,20 0,04 – 0,08 0,03 – 0,06 0,02 – 0,05 0,03 – 0,06
6,0 0,11 – 0,22 0,13 – 0,23 0,12 – 0,23 0,08 – 0,14 0,08 – 0,11 0,08 – 0,12 0,08 – 0,11 0,14 – 0,28 0,14 – 0,23 0,11 – 0,23 0,12 – 0,20 0,12 – 0,24 0,14 – 0,20 0,12 – 0,24 0,06 – 0,10 0,05 – 0,08 0,04 – 0,07 0,05 – 0,08
8,0 0,13 – 0,26 0,15 – 0,28 0,14 – 0,28 0,10 – 0,18 0,09 – 0,12 0,09 – 0,14 0,09 – 0,12 0,18 – 0,34 0,18 – 0,28 0,13 – 0,27 0,16 – 0,24 0,16 – 0,28 0,16 – 0,24 0,16 – 0,28 0,08 – 0,12 0,07 – 0,10 0,06 – 0,09 0,07 – 0,10
WWW.WIDIA.COM
A-12-02996EN_me_WIDIA_SlimLine_Catalog.qxp:WIDIA
10/15/12
10:38 AM
Page 35
Informational Icons Guide Application Icons Face Milling
Pocketing
Counter Sinking/ Stroke Chamfering
Drilling
Shoulder Milling: Square End
Shoulder Milling: Ball/Bull Nose
Reaming: Through Hole
Drilling: Inclined Entry
Ramping
Helical Milling
Reaming: Blind Hole
Drilling: Inclined Exit
3D Profiling
Slotting: Ball/Bull Nose
Reaming: Through and Cross Hole
Drilling: Stacked Plates
Slotting: Square End
Slotting: Side
Reaming: Blind and Cross Hole
Drilling: Convex
Slotting: T-Slot
Chamfer Milling
Geometry Icons Shank: Plain
Shank: SN Shank
Shank: Weldon: 2Flat
Shank: SK Shank (Rübig™)
Shank: Plain ≤H6
Shank: Shell Mill Shank
Shank: Flat
Shank: SSF Shank
Shank: SF Shank
Shank: Weldon®
Shank: Screw–On
Shank: KM™ Shank
Tool Dimensions: 2Flute/2Margin/ coolant
Tool Dimensions: 2Flute/4Margin/ no coolant
Through Coolant: Radial: Drilling
Through Coolant: Axial: Drilling
Tool Dimensions: 2Flute/4Margin/ coolant
DIN Number: 6537
Flood Coolant: Drilling
Feature Icons
DIN — German Institute for Standardisation
WWW.WIDIA.COM
35
A-12-02996EN_me_WIDIA_SlimLine_Catalog.qxp:WIDIA
10/15/12
10:49 AM
Page 36
THE NEXT GENERATION OF WIDIA SOLID CARBIDE DRILLS ™
New Top Drill S™ Solid Carbide Drills for Steel and Cast Iron • Introducing two brand new lines of WIDIA Top Drill S Solid Carbide Drills for high-performance drilling applications. • The TDS for steel and TDS for cast iron have been designed specifically to reduce cost per hole by increasing metal removal rate (MRR) and tool life. • Due to their application specific design, the TDS for steel and TDS for cast iron are the obvious choices for customers seeking the ultimate in high-performance drilling.
To learn more about our latest tooling advances, contact your local Authorised Distributor or visit www.widia.com.
36
A-12-02996EN_me_WIDIA_SlimLine_Covers:SlimLine_Covers
10/15/12
10:44 AM
Page 2
Metalcutting Safety IMPORTANT SAFETY INSTRUCTIONS Read before using the tools in this catalogue! Projectile and Fragmentation Hazards Modern metalcutting operations involve high spindle and cutter speeds and high temperatures and cutting forces. Hot metal chips may fly off the workpiece during metalcutting. Although cutting tools are designed and manufactured to withstand high cutting forces and temperatures, they can sometimes fragment, particularly if they are subjected to over-stress, severe impact, or other abuse. To avoid injury: • Always wear appropriate personal protective equipment, including safety goggles, when operating metalcutting machines or working nearby. • Always make sure all machine guards are in place.
Breathing and Skin Contact Hazards: Grinding carbide or other advanced cutting tool materials produce dust or mist containing metallic particles. Breathing this dust or mist — especially over an extended period — can cause temporary or permanent lung disease or make existing medical conditions worse. Contact with this dust or mist can irritate eyes, skin, and mucous membranes and may make existing skin conditions worse. To avoid injury: • Always wear breathing protection and safety goggles when grinding. • Provide ventilation control and collect and properly dispose of dust, mist, or sludge from grinding. • Avoid skin contact with dust or mist. For more information, read the applicable Material Safety Data Sheet provided by Kennametal and consult General Industry Safety and Health Regulations, Part 1910, Title 29 of the Code of Federal Regulations. These safety instructions are general guidelines. Many variables affect machining operations. It is impossible to cover every specific situation. The technical information included in this catalogue and recommendations on machining practices may not apply to your particular operation. For more information, consult Kennametal’s Metalcutting Safety booklet, available free from Kennametal at 724.539.5747 or fax 724.539.5439. For specific product safety and environmental questions, contact our Corporate Environmental Health and Safety Office at 724.539.5066 or fax 724.539.5372.
WIDIA, AluSurf, KM, NINA, Rübig, Top Drill S, VariDrill, VariMill, and WU25PD are trademarks of Kennametal, Inc. and are used as such herein. The absence of a product, service name, or logo from this list does not constitute a waiver of Kennametal’s trademark or other intellectual property rights concerning that name or logo. Weldon® is a registered trademark of Weldon Tool Company. ©Copyright 2012 by Kennametal Inc., Latrobe, PA 15650. All rights reserved.
A-12-02996EN_me_WIDIA_SlimLine_Covers:SlimLine_Covers
10/15/12
10:44 AM
Page 1
WIDIA™ Slim Line ITC Ltd Cyber House, 1 Kepler, Lichfield Road Industrial Est, Tamworth B79 7XE Telephone: +44 (0) 1827 304500 Fax: +44 (0) 1827 304501 E-mail: sales@itc-ltd.co.uk
Distributed by:
WIDIA™ Slim Line ©2012 Kennametal Inc. All rights reserved. A-12-02996EN_me
Distributed by:
WWW.WIDIA.COM