Building Business December 2019

Page 1

THE LATEST NEWS FROM YOUR BUILDING SUPPLIES SPECIALIST

Building law reforms 07

Highlights

Estimating how many hours the job will take 11

The unique features of portable home manufacturing 03

Photo provided courtesy of

ISSUE 88

Seven tips to avoid an unpleasant Xmas surprise 14

D 20 EC 19

Codewords and quizzes 24


LEGAL

PROMOTION

The unique features of portable home manufacturing

Easy Access ladders

03-05

ISSUE 88: DEC 2019

In this issue 16 FISHING

PROMOTION

Winning while catching fish

17

Hand tools

06

PRODUCT KNOWLEGE

MBIE

GIB Weatherline® project case study

19-20

An update on building law reforms

07-09

THE APPRENTICE

BUSINESS ADVICE

The apprentice diary: entry #19

Estimating how many hours the job will take: why 83% get it wrong

11-12

22 LBP CODEWORDS Free building standards and tips on LBP ID cards

PROMOTION

24-27

Parmco kitchen pack

13

ITM NEWS

INSURANCE Seven tips to avoid an unpleasant surprise at Christmas

14

New owners for Coromandel ITM and New location for Thomsons ITM

29-30

HIGHLIGHTS Hand tools on promotion

Building law reforms

Bostik promotion

Parmco kitchen promotion

LBP Codewords and quizzes

P06

P07

P10

P13

P24-27

SIX

CHAN CES TO WIN ! EACH VALU ED AT $899 RR P

changes are in the areas of: building methods , building levy, and offences, penalties and public

work through legislation, regulations and ion is underway, with opportunities to engage and m with Government (see timeline over the page).

Building Business contributes towards your LBP skills maintenance requirement. Ensure you log this into your ITM diary or the ITM App today.

Building Business is a bi-monthly magazine produced by ITM Support Office. For feedback or address updates contact: ITM Support Office, PO Box 101556, North Shore, Auckland. Email: buildingbusiness@itm.co.nz Ph: 09 415 2787.


Portable home manufacture is just another form of prefabrication - by which I mean manufacture off-site. We’ve been doing it for centuries, of course, but only to a limited extent. Now with the increasing emphasis on higher productivity and lower cost of building, prefabrication is being seen as the primary solution. By Geoff Hardy, Auckland Commercial Lawyer

CONTINUE >>

LEGAL

The unique features of portable home manufacturing

03


04

LEGAL

Admittedly there are some downsides to prefabrication. You have to transport your products to the site. And because they are manufactured in a remote location you don’t have the advantage of being on the spot, visualising how they are going to fit in, and making changes spontaneously. But on the other hand, it is easier to make things on a production line in a purpose-built factory with specialist plant and equipment and a roof over your head. It’s also cheaper and quicker to churn out commodity products than it is to make customised one-off items and it appeals to customers who just want to buy off the shelf rather than having to do research and provide design input.

to cover the manufacturing site, transportation, and site installation. Portable home manufacture is typically paid for in a different way from standard building. You can insist on a substantial deposit upfront, and most if not all of the balance before the home leaves your yard. You can also get the protection of retaining ownership of the home right up until the point where it is installed on-site – assuming your contract says the right things – so you can resell the home if your customer doesn’t come through with the money. If some of the price is payable only once the CCC is issued, then you may want an agreement to mortgage over the site to secure that payment.

What building laws apply? Regardless of what type of building you are doing – whether it be portable home manufacture, on-site construction, landscaping, joinery manufacture, or boatbuilding - there are six essential questions you must ask yourself when you are checking what laws apply to you. Those questions are:

Portable home contracts Contracts to supply portable homes differ from contracts to build something on-site, in a number of respects. Your contract is a sort of a hybrid which is part sale agreement and part building contract. It is more of a sale agreement if your customer is buying a home that you already have in stock, and it is more of a building contract if your customer has commissioned you to build one, especially if it is to be customised to suit their requirements.

Your contract is a sort of a hybrid which is part sale agreement and part building contract.

But either way, you will usually be obliged to transport the home to the site, prepare the foundations, install the home on those foundations (which in many cases will involve connecting up two or more prefabricated modules), connect it up to services, and build various ancillary structures such as decks, pergolas, driveways and landscaping features. Plus you will be bound by certain express or implied quality and performance warranties. The contract will typically be fixed price rather than cost reimbursement, although there may be provisional sums for site-specific items like transportation, foundations, connections to services, and landscaping. Customers get some flexibility in terms of specifications at the outset, but very limited rights to request variations afterwards. The contract works and public liability insurance needs

1

Am I doing “building work” as defined in the Building Act 2004? If so, then your work must comply with the Building Code.

2

Am I doing building work that requires a building consent? If so, then you must persuade the relevant Council(s) to issue a building consent and later a code compliance certificate in respect of your work.

3

Am I building a “household unit” or am I reselling one that was built with the intention of resale? If you are building one, then there are four mandatory documents you have to provide to your customer, in the right order. And if you are building or reselling one, then you are subject to a lot of powerful consumer rights and remedies that you need to be aware of.

4

Am I doing “restricted building work” as defined in the Building Act 2004? If so, then that work will have to be carried out or supervised by one or more licensed building practitioners and each of them will have to provide a certificate of compliance with the consent application or a record of work on completion.

5

Am I doing something “relating to building work” or am I just a supplier of building products? If it is the former, then you can’t be sued any more than 10 years after you did the work. If it is the latter, then the period is 15 years instead.

6

Am I a party to a “construction contract” as defined in the Construction Contracts Act 2002? If so, you can use the payment claim regime to enforce payment and the adjudication regime to resolve disputes.


05

LEGAL

With portable home manufacturers, I would generally answer “yes” to each of those six questions. And I know from experience that that is going to come as a surprise to some – in particular questions 3 and 4, which are more often honoured in the breach than in the observance. What you don’t want to do is find out the hard way, once you have got a disgruntled customer on your hands and they go to a construction lawyer to find out what leverage they have over you.

When components are manufactured overseas it makes regulatory compliance a lot more complex for portable home manufacturers, Councils, and construction lawyers alike.

Overseas-sourced components The situation gets way more complicated when most or all of your portable home components have been manufactured overseas, which is becoming increasingly common. The important point to note is that, that doesn’t let you off the hook, in terms of the six questions. It just makes regulatory compliance a lot more complex for portable home manufacturers, Councils, and construction lawyers alike.

In reality the Building Act and the Construction Contracts Act don’t really cater all that well for overseas manufacture, so we have had to distort the existing rules to suit. The District Court, the Ministry of Building, Innovation and Employment (“MBIE”) and the Building Practitioners Board have all issued rulings about portable homes. Suffice it to say that the overseas components will be scrutinised just as rigidly as the domestic components, so there is no point in dealing with overseas suppliers who can’t or won’t demonstrate that their components comply with New Zealand requirements.

by Geoff Hardy Auckland Commercial Lawyer

lawyers

Geoff Hardy has 45 years’ experience as a commercial lawyer and is a partner in the Auckland firm Martelli McKegg. He guarantees personal attention to new clients at competitive rates His phone number is (09) 379 0700, fax (09) 309 4112, and e-mail geoff@martellimckegg.co.nz This article is not intended to be relied upon as legal advice.

All photos in this article provided courtesy of Advance Build.


HAND TOOLS

Prices valid until December 24th 2019 or while stocks last.

300mm Heavy Duty Combo Square

180mm Rafter/ Speed Square #JN1956-1800

#JN400MS

• Solid aluminium body • CNC machined edged for guaranteed accuracy • Low glare E-Z read protective anodised finish • Continuous scribing notches from 2cm - 12cm • Made in USA

• Auto-Lock blade assembly • Stainless steel blade with perma-etch graduations • Hardened screw-in scriber • Made in USA

$23

$24.50

EXCL GST

EXCL GST

Heavy-Duty Box 1200mm Level

Box-Beam 1800mm Level

• • • • •

• Housed in solid blocs of acrylic making them highly resistant to direct impact • Precision-milled gauging edge helps ensure accuracy • SurroundView™ enhances vial readability • Ergonomic rubberized hand grips

#JN1717-120

Glo-View® vial system to enhance readability in low light Reinforced aerospace aluminium alloy frame Large rubberised hand-grips offer comfortable use Precision-milled gauging edge helps ensure accuracy Anti-slip/anti-shock end caps help protect the level from damage

#JN1741-180

$76

$69

EXCL GST

EXCL GST

Claw Hammer 20oz

Metal Detector

#E20C

#ZN-MT6

• • • •

• Locate embedded metal before your drill bit or saw blade does • Automatically differentiates between magnetic metal (such as rebar) and nonmagnetic metal (such as copper pipe) • Shows the depth of metal from the surface in both inches and centimetres • Easy-to-read LCD screen identifies the location of metal objects to the nearest inch and depth to the nearest 13mm • Helps map out the grid of metal through any nonmetallic construction material including concrete; tile and marble

Estwing's solid steel claw hammer with leather grip Fully polished and forged in one piece Smooth face 20oz (560g) Made in USA

$65 EXCL GST

550mm Handsaw #GM327H22 • 9 razor sharp teeth per inch • Special 3-edge tooth combines a superb cutting ability • Made in Sweden

$32 EXCL GST

ITM BEACH CRICKET SET

! EE R H F WITHASE RC PU

$240 EXCL GST

Spend over $200 on all products on this page and get your free Beach Cricket Set* *Strictly while stocks last. Limit of one set per customer.


07

Building law reforms MBIE

The aim of the building law reforms is to make the building system more efficient, lift the quality of building work, and provide fairer outcomes if things go wrong.

About the reforms The most recent survey of new homeowners by BRANZ found 80 percent had to get tradespeople back to fix defects after they had moved in. Consenting delays are also an issue, costing around $1,000 for each week a residential site is shut down. The building reforms will speed up consenting, support designers and builders to choose the right products and install them in the way intended, and make it cheaper and faster to use innovative building methods such as prefabrication. A new certification process will mean manufacturers with good systems won’t need to get a building consent for their design or factory work. This means only one consent will be required, and will also potentially halve the number of inspections needed. Once the changes are in place, New Zealanders will save up to $150 million over the next decade from fewer delays and fewer repairs needed to substandard work. The Government is taking a phased approach to the reforms to accelerate changes that bring immediate benefits while work continues on those proposals that need further development and testing. This will also ensure the sector has enough time to transition to its new regulatory settings with minimal business disruption.

What changes has the Government agreed?

1

Faster building consents for prefabrication and off-site manufacturing

Current building consent processes are best suited to traditional construction methods and can present barriers for more innovative ways of

building. The Government is proposing to address this through a manufacturer certification scheme, which will streamline the consenting process for modern methods of construction such as prefabrication and off-site manufacturing. The certification scheme will mean a building consent is needed only for the installation of a prefabricated home. This means a second consent won't be required for the design or factory work, and could also halve the number of inspections needed. This will save time and money by reducing duplicated effort both for BCAs and for manufacturers. Faster and cheaper construction through greater use of prefabrication and offsite construction will also bring more affordable homes to the market.

2

Better information and clear responsibilities for building products

Manufacturers and suppliers will be required to make a minimum level of information publicly available about the building products they sell. This will include a plain English description and information about how the product should be installed and maintained. Manufacturers and suppliers will also be required to provide evidence for claims they make about their products' performance. The new requirements will help designers and builders choose the right products and will speed up consenting by reducing the need for BCAs to request further product information.

CONTINUE >>


08

MBIE

Making product information publicly available will also improve the quality of building work by helping builders install products in the way intended. This should reduce the number of inspection failures, saving up to $1.5 million a year. MBIE is now working with key stakeholders to finalise the information requirements that will be set in Regulations. This will ensure they enable better design, consenting and building work without placing an undue burden on manufacturers and suppliers. MBIE will have the power to require any person to provide information when this is needed to determine whether a building product or method should be subject to a ban or warning. This will ensure risky products and methods are kept off the market.

3

Strengthening CodeMark to provide greater product assurance

The Government is strengthening New Zealand's existing product certification scheme, CodeMark, by improving the quality of product evaluations and certificates. Changes include setting registration requirements for product certificates and product certification bodies, and providing MBIE with the ability to investigate, suspend or revoke registrations where appropriate. This will build confidence in the scheme, make consenting more efficient, and lead to safer and more durable building work.

4

Reducing the building levy

The Government has decided that the building levy will be reduced from $2.01 to $1.75 (including GST) per $1,000 of consented building work above a threshold of $20,444 (including GST). This will lower building consent costs by around $80 for the average new build, and by $5,200 for a $20 million commercial project. The lower levy rate will also reduce the surplus that has accrued in the building levy account without affecting the level of service MBIE provides to levy payers. At the same time, the scope of the levy will be widened to allow MBIE to spend it on activities related to the broader stewardship of the sector, such as implementing the Construction Sector Accord. Stewardship is crucial to the development of an efficient, high-quality regulatory system. All expenditure will continue to be for the benefit of levy payers and within Treasury guidelines.

5

Updating offences and penalties

The Government is increasing penalties for offences against the Building Act, and setting higher penalties for companies than individuals. This will bring the Act into line with other legislation and ensure penalties are sufficient to deter substandard work and poor behaviour. See Table 1 below for a summary of the proposed changes to penalties.

Table 1

SUMMARY OF PROPOSED CHANGES TO BUILDING ACT MAXIMUM PENALTIES Type of offence*

Current maximum

Proposed new maximum Individuals

Companies/organisations

Breach of administrative obligations

$2,000 / $5,000

$5,000

$25,000

Breach of defined responsibilities

$5,000

$20,000

$60,000

Wilful breach; significant safety risk; impersonate official

$5,000 / $10,000 / $20,000

$50,000

$150,000

Serious offences*

$200,000

$300,000

$1,500,000

* Refer to Cabinet paper "Lifting the efficiency and quality of the building system: Proposals for Bill One" for full breakdown.


09 The implementation of these changes will then be phased to ensure that suppliers, manufacturers, BCAs and others throughout the sector have plenty of time to meet the new regulatory requirements with minimal disruption to their business.

The timeframe for filing charges under the Act is also being extended, from 6 to 12 months. This will provide enforcement agencies with enough time to conduct thorough investigations, while ensuring any prosecutions will still be timely.

What other changes are being considered?

When will the changes come into effect? MBIE expects the changes to the building levy will be confirmed before the end of 2019, and will take effect from mid-2020. See Figure 1 below for a proposed timeline. All other proposals require amendments to the Building Act. We are working with key stakeholders to develop the detailed design for each proposal, and expect a Bill will be introduced to Parliament in the first half of 2020. There will be opportunities to provide further feedback on the proposals through the select committee process. When the Bill is passed into law, which could be as soon as mid-2020, the updated offences and penalties, together with the new public notification requirements are proposed to come into effect immediately.

MBIE is continuing to develop advice on proposals to strengthen occupational regulation within the sector. A Bill will be developed that could be tabled in Parliament before the end of 2020. This will ensure building professionals and tradespeople have the right skills and can be held to account for substandard work or poor conduct. We received clear feedback during the public consultation that the building insurance market is not currently in a position to meet the large increase in demand that would arise from a compulsory guarantee or insurance product. The Minister has asked us to report back in 2020 on options to address issues with risk, insurance and liability in the building system. Sector feedback has strongly supported taking a logical and phased approach to change. This makes sense, as it allows us to keep up the momentum with the reforms while continuing to work on those proposals that need further development and testing.

The new responsibilities in relation to building products, the strengthened CodeMark regulations, and the manufacturer certification scheme for Building products of construction will be phased to modern methods BENEFITS Minimum information about building products will be publicly come into effect over time. available. Responsibilities for product suppliers and manufacturers will also be clearer, and they’ll be accountable for their products.

If you have any questions about the reform programme please email building@mbie.govt.nz Reduced building

Save costs from

Easy to choose the right

Confidence in CodeMark

existing product certification will2020 be consent time consenting delays product for the job, and building products WeThe will work with the framework sector(CodeMark) during as use it correctly strengthened, investigative and actionable powers improved, and penalties can be imposed. we design and test processes, confirm how OTHER CHANGES the changes will work in practice and develop • Decreased building levy, save around $80 for an average new-build. “Building Consent Authorities say building product information will help assess compliance withbe the Building Code and result for the • Stronger financial penalties in the Building Act provide incentives to get it right - with more time to lay regulations. There will opportunities in fewer requests for information during the consenting charges. process.” public to provide feedback on the regulations • Building Act changes to be publicly notified online, instead of newspapers. Feedback from public consultation, 2019 before they are finalised in 2021. On average, there are 5 requests for information per consent.

More detailed information about these changes is at www.building.govt.nz

Figure 1

FIRST PHASE - BILL 1 TIMELINE

lative changes are in the areas of: building methods roducts, building levy, and offences, penalties and public cation. OCT 2019

EARLY 2020

CABINET DECISIONS

on

ti

la

BILL INTRODUCED

LATE 2020

EARLY 2021 ONWARDS

OTHER BILL 1 CHANGES PHASED IN THROUGH REGULATIONS

BILL PASSED

CHANGES TO BUILDING LEVY & OFFENCES AND PENALTIES COME INTO EFFECT

Draft Bill

Opportunity to engage with Select Commitee

gu

la

ti

on

s

Le

gi s

MID 2020

Develop detail of regulation with stakeholders

Draft regulations

Opportunity to have your say on regulations

Design + test processes with stakeholders

Develop detail of how it works in practice with stakeholders

Im

pl e

m

en

ta ti

on

Re

cess to work through legislation, regulations and mentation is underway, with opportunities to engage and op them with Government (see timeline over the page).

Finalise regulations

ADDITIONAL PHASES

Ri

O cc u sk reg pa an ula tio d tio na lia n l bi lit y

ADVICE TO MINISTER

Engage with stakeholders to develop proposals and Ministerial advice

Announcements are expected in 2020

Deliver material and implement changes with stakeholders

MBIE

There was widespread agreement during public consultation on the proposed reforms that the current maximum penalties in the Building Act re insufficient to promote compliance. Many of the current maximums have not been adjusted since 2004.


S I CHA X Your chance to WIN a paddle board combo! 1.

N TO WICES N! EACH VA LU

$899 RED AT RP

SPEND $50 (excl. GST) ON ANY BOSTIK PRODUCT BETWEEN 01 DECEMBER 2019 - 31 JANUARY 2020

2. SCAN

QR CODE AND FILL IN YOUR DETAILS TO GO INTO THE DRAW* FOR YOUR CHANCE TO WIN!

Each combo includes: Aztron Mercury 10’10” Double Chamber Inflatable SUP Board; Aztron Double Action Pump 20 PSI; Aztron SUP Carry Bag; Aztron 10ft Coiled SUP Leash; Aztron Style Alu SUP 3-piece Paddle *Six separate prizes to be won. Valid for purchases of $50 (excl. GST) for any Bostik product during the promotional period, in a single transaction. Each qualifying purchase will earn you one entry into the draw. All further qualifying purchases will earn an additional entry. Scan the QR code for entry, or visit www.itm.co.nz/bostik for entry form and full terms and conditions. Prizes drawn 03 February 2020 and all winners will be contacted.

FEATURED PRODUCTS THIS MONTH MS Safe Seal

Tuf As Nails General Purpose

Fill-A-Gap

#30804316

#30804014

Wallboard & construction adhesive

Acrylic gap filler and sealant

A solvent-based, high strength, highly versatile construction adhesive, designed for bonding most panels to vertical studs or overhead joists. Excellent wet grab – good wet body, or initial grip. Cured adhesive is very tough and flexible. LOSP suitable. Non drip. Suitable for interior and exterior use with Formica, particleboard, steel and aluminium, timber and hardboard, plasterboard, cement sheet and concrete. Made in NZ.

Economical, paintable, gunnable, general purpose acrylic gap filler/sealant. Easy to use and provides excellent adhesion for gaps and cracks, and other low-movement joints. Master Painters NZ tested and approved. Made in NZ.

Expanda Pro Gun Foam

Roof & Gutter Silicone Sealant

#30605417

#30804193

High yield, low expansion PU expanding foam

Weatherproof, premium 100% silicone sealant

BRANZ Appraisal 890, this is a professional grade, one component, gun applied, self expanding PU foam. Very high yield (up to 50L) and low post-expansion in one product. Seals, fills cavities, minimises sound, provides air seal, eliminates draughts. Ideal for sealing around windows, door frames, sealing roof openings, air conditioning vents etc. Excellent adhesion to most substrates.

Premium, waterproof, weatherproof, permanently flexible translucent sealant with excellent adhesion to common construction materials and metals. Neutral cure and is ideal for green builds. Excellent adhesion, it stays permanently flexible. It will not corrode bare metal and is Ideal for metal roofing systems, plumbing applications, air conditioning ducting and sheet metal fabrications.

#30605491 - White #30605492 - Grey #30605493 - Black

Solvent-free, high performance MS construction sealant BRANZ Appraisal 705, this is a high performance, heavy duty, MS-based construction sealant that is fully paintable. Solvent-free, highly elasticity and flexible, and sticks to most surfaces. Ideal for sealing construction joints, building and expansion joints. Primer: Prep M for non-porous and metal substrates, Prep P for porous substrates. Available in white, grey and black.

bostik.co.nz


How often have you quoted a job but ended up losing on it, because the hours blew out? It happens to everyone once in a while… but get this wrong too often, and you won’t be very profitable. Even the big players in our industry get this wrong more than they’d like to admit. Fletchers got in trouble last year with overruns on a number of their major projects. It cost them millions.

Did you know: the Sydney Opera House was completed a massive 10 years behind schedule!

Clearly, when you want to make money on your jobs, it’s very important to accurately estimate how much time they will take. If you’ve ever wondered why your quotes don’t work out, this is a good starting point.

Research shows only 17% of the population can accurately estimate how much time a job or task will take. Basically, we’re all optimists. We tend to believe the future will be better than the past. If only 17% can estimate time correctly, that means 83% are getting it wrong. Mistakes include: ☐☐ Failing to consider how long it's taken us to complete similar tasks in the past (science calls this 'planning fallacy'). ☐☐ Assuming we won't run into any complications that will cause delays (science calls this 'optimism bias'). There are a lot of moving parts in a business, and if you often underestimate hours on jobs, or don’t allow for unexpected curve balls, you won’t make the margin you need. Achieving target margins consistently on every job is key when it comes to being profitable. Let’s not CONTINUE >>

11 BUSINESS ADVICE

Estimating how many hours the job will take: why 83% get it wrong


12 BUSINESS ADVICE

forget, when costs exceed what you quoted, that cold hard cash comes directly out of your pocket. In very real terms, that means less income for you + stressful cashflow. And that is all kinds of bad, especially for a family business. Cashflow headaches are the number one reason for going broke.

Using a formula also means you price consistently regardless of whether you’re feeling optimistic, tired, are desperate for work for your team, or have too much on already. Include your “fudge ratio” calculation and buffer % to build in extra hours for delivery delays, staff absences, weather, etc.

A good margin So how can the average tradie business owner override their planning fallacy and optimism bias?

It’s in the numbers The secret is to be dealing with concrete numbers. They make things very black and white, allowing for smarter decision-making. That’s the kind of strategic thinking required for both quick wins and long-term success. I’ve worked with hundreds of tradie businesses and I can tell you: It’s amazing the insights you can get from a simple deep dive into the numbers when you know what to look for (most don’t).

Backcosting Yes, one important part of this is backcosting (checking all costs – including time/labour - on previous jobs to see how your quote stacked up against what actually happened). To do this, you first need to be working with the right project management software, time tracking app or system, for your specific business. Then, the main thing is, use a structure - so backcosting is easy and doesn’t take all day! Especially important if you run multiple jobs and have a large team.

Finally, you need a strong gross profit margin. A “good” margin to add on top varies for each company, depending on your overheads and industry. It’s important to know what the good margin % is for you to be aiming at, in your market. Although, if it’s not at least 20%, I’d encourage you to make some adjustments right away. Anything under this, and you won’t be able to cover overheads and still make the profits you need to maintain a successful business.

Consider a QS By the way, studies also show that while we are generally bad at estimating how long it takes us to do the job, we’re quite good at estimating how much time the job will take when others are doing the work. So harnessing the talents and objectivity of someone outside your immediate team (like a QS) could be a smart move. Ultimately, accurate predictions and backcosting effectively ensures you will achieve the target margins you need, become more profitable, and grow safely, even with the variables, and any bias you may have. Tweaks like this in profitability + productivity typically get my clients return-on-investment far exceeding my fees inside 3-6 months.

by Daniel Fitzpatrick

Revisit regularly and make sure you are charging enough. The trick is to actually deploy this historical data and turn it into increased accuracy on your next job. When I assist clients in the business coaching process to really look at their previous jobs they can see exactly where they’re losing money on under-quoting. From then on, everything becomes much easier.

Use a pricing formula Be sure to use a pricing formula so you have certainty that your price is fair. Not too low that you won’t make money. Not too high that you’ll be priced out (or if you are, you can walk away confident, knowing the margin was not enough – you don’t work for free).

Daniel Fitzpatrick is a business coach for trades & construction business owners. Find him at NextLevelTradie.co.nz

Book a time with me here to find out how I might be able to help you: www.nextleveltradie.co.nz/guide

References for facts in article: https://medium.com/swlh/escape-the-tyranny-of-the-to-do-list-how-toschedule-your-priorities-not-your-time-fe5fc90d0d58


PARMCO 600MM KITCHEN PACK Built-in Oven

Gas Hob

Induction Hob

#PPOV-6S-PYRO-2

#HO-7-6G-3GW

#HX-2-6NF-ZLIND

• Stainless steel • 12 functions including pyrolytic cleaning mode • 76 litres • Digital touch display

• 3 burners + wok • Black glass design • Automatic ignition • Cast iron trivets

• • • •

Freestanding Dishwasher

Canopy Rangehood

520mm Integrated Rangehood

#RLCD-6G-1000L

#T7-6S-4

#PD6-PSL-2

• Stainless steel • Touch control panels • LED lights • Extraction at 1000m3/hour

• Stainless steel • Push button controls • LED lights • Extraction at 1000m3/hour

• • • •

Stainless steel LED display 6 wash programs 15 place settings

Four kitchen appliances for one HOT PRICE Includes: Oven, Dishwasher, Hob, Rangehood

or

or

Zoneless induction 9 power settings Touch controls Easy clean surface

$3200 EXCL GST

BONUS: Free Okuma Cortez Rod/Reel Boat fishing combo (RRP$299)

RAIN PROOF 20 UV RESISTANT

KG

CAN BE STORED OUTSIDE COLOUR CODED

100% RECYCLABLE BAGS & STRETCH HOOD NEW STRETCH HOOD TECHNOLOGY

PROUD NEW SUPPLIERS of Concrete Products to the ITM GROUP

www.strongcrete.co.nz STRONGCRETE ITM Advert A4 DPS 031019mm .indd 1

14/10/19 2:57 PM


14

INSURANCE

Seven tips to avoid an unpleasant surprise at Christmas It's easy to forget things when you're thinking about Christmas and the holidays, as well as rushing to finish off projects for demanding customers. Here are seven things to remember before you put your feet up and enjoy your well-earned break.

1

Secure your sites before you go (and take your tools with you)

They're more vulnerable to thieves when closed up for the holidays, as no one is regularly on-site and neighbours may be away. Make sure they're as secure as possible and take your tools off-site, and out of your truck, and put them somewhere safe.

2

Remember to arrange travel insurance well before you leave

Don't leave it to the last minute, you might not be able to get it at short notice, and it's even more difficult once you've started your trip. And don't even think about going overseas without it. Compared to the cost of medical treatment, lost luggage or cancelled plans it's well worth it.

3

Notify your insurer in writing if you’re going away for a long period

box (and ideally mow the lawns) while you’re away. Also, don’t pile up your Christmas present wrapping and boxes on the roadside before you go away, do it once you get back.

6

Insure any new jewellery, motorbikes, vehicles, boats, caravans, motor homes, expensive electronics (smartphones & iPads), jet skis, guns, rods or other toys before you drive them away or leave them unattended It may be the last thing on your mind but it's important to arrange insurance on any expensive purchases before you pick them up. This includes increasing your contents sum insured and notifying your insurer of items that must be separately listed on your contents policy, such as jewellery. Murphy's Law says it's in the small window between picking up the new car and arranging the insurance that an accident will happen! And thieves are very active over Christmas, so any expensive gifts should be insured too.

7

Make sure you’re roadworthy (vehicles and trailers)

Check your registration and warrant are up to date and the vehicle is in good condition before taking off on a road trip (tire pressure OK, lights work, oil checked etc). This equally applies to your trailer (tires, lights, chassis, axle and towbar). Don’t overload your trailer either, in the event of an accident this may affect your insurance. Finally, remember to check that your drivers license is current!

House insurance policies have exclusions if a property is unoccupied for a period of time, which could be as short as 14 days. Check your policy and if you’re going away for a long break make sure you’ve let them know.

by Ben Rickard

4

Builtin Insurance Advisor

Are you having house sitters or AirBnB guests over the holidays?

You need to inform your insurer if this is something you regularly do or you risk not being covered.

5

Take sensible precautions before you leave home

This means leaving some curtains open, putting lights on a timer, having someone clear your letter

Builtin Insurance are New Zealand’s trade insurance experts. For more information and an instant quote visit builtininsurance.co.nz or contact Ben Rickard at ben@builtin.co.nz or 0800 BUILTIN


Beautiful in black Marley Stratus Design Series uPVC spouting and downpipe system ®

STYLISH

DURABLE

Available in a range of contemporary colours and profiles to complement the style and design of any home

Premium spouting and downpipes designed to perform in New Zealand’s harsh conditions

Available in five colours and two profiles – contemporary Stormcloud® quarter round, and higher capacity Typhoon® half round.

Grey Friars

®

Ironsand

®

Black

Copper

Titanium


LADDERS Trade Series Double Sided 4-Step Ladder

Trade Series Work Platform 2-Step 150kg

#OXDS04

#OXWP02

• Heavy duty ladder feet • Non-clogging hinge • Hinge won’t jam up with plaster spills • Titan tough rivets with extralarge heads • Internal side stay - prevents damage during transport • 150kg load rated

• • • • •

Lightweight and fast setup Aluminium Fold-away legs Positive locking hinges Anti-slip feet

$120

$99

EXCL GST

EXCL GST

PROUDLY DISTRIBUTED BY HAYDN®

Prices valid until December 24th 2019 or while stocks last.

Trade Series Telescopic Platform Ladder #OXTPL04-07 • Large work platform for safeand secure footing • Adjustable through 4 heights from 1.2M to 2M • 1 platform ladder to suit varying heights

$480 EXCL GST

Liquid Shield

Recyclable

Breathable

Heavy Duty

Surface Shields® Builder Board™ with Liquid Shield is a heavy duty surface protection contractor grade construction board. The most durable paper board on the market! Builder Board ™ replaces the need for large, bulky sheets of masonite and it rolls out fast and flat. With the new Liquid Shield technology, Builder Board™ is now spill proof. It defends against water, paint, mud and more! It’s also 100% recyclable.

www.haydn.co.nz

#BLDLS38100

ITM BEACH CRICKET SET

Get a FREE pair of Haydn Green Arm Sunglasses with every roll of Builder Board purchased

! EE R H F WITHASE RC PU

Spend over $200 on all products on this page and get your free Beach Cricket Set* *Strictly while stocks last. Limit of one set per customer.


17

Summer means fun, family and fishing for a lot of us. As we down tools and head to the beach it’s a good time to think about what we might catch. It’s also, time to consider what to do with the leftovers, the parts of the fish that we don’t want.

So maximum utilisation means you don’t need to fish as often, or you can share more food with others. It also means you are demonstrating more respect for the fish that you harvest and the environment it came from. We all want our kids and theirs to enjoy abundant fisheries in the future. We can all contribute to that successful outcome if we think about how we fish and what we do with our catch.

Every summer there are stories of fish frames and heads littering beaches. This is a real waste as there are whole communities of people who would lap up the opportunity to eat these unwanted fish parts. There is a significant amount of sweet-tasting flesh on the head and frame of a snapper. The meat next to the bone and skin has the best flavour, and so much is left behind when just the fillets are used, and the rest tossed away.

It’s easy Visit the website www.freefishheads.co.nz or download the free app to your smartphone. Then you can call someone while you’re still on the water and meet an appreciative family back at the boat ramp. Or, if you fillet your fish later, you can meet at an agreed location. Tell them to bring a chilly bin of ice and share your gift of fish. Everyone’s a winner when it comes to Free Fish Heads.

Sharing is caring The good news is that there is a movement afoot to help you share any unwanted fish heads and frames with people eager to get their hands on this highquality food. These parts can be smoked, baked, barbecued or boiled for soups and stock. In 2012 Matt Watson created the Free Fish Heads website www.freefishheads.co.nz This website makes it easy for people to connect and share, ultimately using the whole fish so nothing is wasted. LegaSea supports this initiative boots and all because it encourages sharing fish while conserving our marine resources.

Make your fish go further Fresh and tasty protein is getting more expensive and the shop-bought stuff will not be the same as the nutrients derived from freshly caught fish. LegaSea appreciates the effort Matt continues to put into the Free Fish Heads initiative because it’s

FISHING

Winning while catching fish

all about conserving fish. Eating the fillets from a snapper represents about 30% of the whole fish. If the head, frame and wings are used then that is closing in on maximum use of the fish, giving you and your family several meals.


WET AREA WATERPROOFING

Prices valid until December 24th 2019 or while stocks last.

Dunlop Express Wet Area Waterproofing

Dunlop Express Wet Area Tape

• Easy to use, brush on to required thickness • 10-year guarantee • Class III Membrane AS/NZ4858 and conforms to AS3740-2010 Wet Area Membranes • Tile after 4 hours when used with Dunlop Express Wet Area Tape

• • • •

#23715 - 5kg

$59 EXCL GST

#23648 - 10 Metres Self-adhesive - peel and stick waterproofing tape Easy to use, faster installation Rapid waterproofing system Meets the standard for waterproofing according to the Australian Building standards • Tile after 4 hours when used with Express Wet Area Waterproofing Membrane

#16551 - 20 kg

$225

$39

EXCL GST

EXCL GST

DOOR HARDWARE

Prices valid until December 24th 2019 or while stocks last.

Schlage Medio Series Blending contemporary styling with uncompromised quality the Schlage Medio Series is designed for everyday living. Featuring the new QuickFix™ technology, for fast door hardware installation in under 30 seconds (after installation of the latch and strike). Available in passage, privacy and dummy levers with a 10-year mechanical warranty and 1-year special finish warranty (10-year finish warranty for SCP).

Medio Sierra – Matt Black

Medio Rivera - Matt Black

#SRL51SRMB - Passage #SRL52SRMB - Privacy #SRL53SRMB - Dummy

Medio Sierra – Aged Brushed Copper #SRL51SRAC - Passage #SRL52SRAC - Privacy #SRL53SRAC - Dummy

ITM BEACH CRICKET SET

! EE R H F WITHASE RC PU

#SRL51RVMB - Passage #SRL52RVMB - Privacy #SRL53RVMB - Dummy

Medio Rivera – Aged Brushed Copper #SRL51RVAC - Passage #SRL52RVAC - Privacy #SRL53RVAC - Dummy

Spend over $200 on all products on this page and get your free Beach Cricket Set* *Strictly while stocks last. Limit of one set per customer.


GIB Weatherline Project Case Study

19

ÂŽ

PRODUCT KNOWLEDGE

Fabric Apartments, Onehunga One of the first large scale commercial installations to use GIB WeatherlineÂŽ Rigid Air Barrier Systems is well underway at Fabric Apartments, a high-profile apartment project in Onehunga, Auckland. Situated on a 1.29ha site, the Onehunga development when completed will comprise approximately 240 new apartments spread across five four storey buildings. Stage one is currently under construction by Kalmar Construction which consists of three fourstorey apartment buildings due for completion in mid 2020.

CONTINUE >>


20 PRODUCT KNOWLEDGE Gordon White, Residential Market Manager at Winstone Wallboards, says that while gypsum based rigid air barrier systems may still be relatively new in New Zealand, their use has been commonplace in medium and high-rise commercial projects across North America and Europe for well over a decade. “With over 7500 hours of research and development already committed, and with the sheets being manufactured at our local Christchurch plant, we’ve invested heavily to bring GIB Weatherline® systems to market. We have been really pleased with the level of market interest to date and will continue to work closely with our commercial customers to further evolve the offer to meet the changing needs of our rigid air barrier customers.” Branden Venter, Façade Site Supervisor at Kalmar, said while the new system has been a learning experience for his team, they are really impressed with the product from an installation perspective. “The fixing has been easy – it’s a hell of a lot lighter and the score and snap ability means putting the board on the wall has been way faster than anything the team have used before.” GIB Weatherline® sheets are fast to install compared to other commercial rigid air barrier products as they can be easily scored, snapped and screwed with no need for power tools to cut the sheets. The score and snap process also makes it easier to get a consistent, straight cut edge making positioning and installing sheets onto the frame simple and uniform. To reduce any potential for moisture to penetrate beyond the building envelope, board edges and penetrations are sealed using a range of GIB Weatherline® flashing and sill tape products.

“The taping took a little while to get used to as it was the first time our installers had installed a rigid air barrier system but with time on the job we developed easier ways to speed this process up. We had lots of support from the GIB® team, they have been on site working with the installers, have run Q&A sessions and have used this project as a learning tool for ways they can improve it – they even bought tape guns on site to try and make things easier,” Branden says’.

Why GIB Weatherline® ☐☐ Acts as both an air barrier and secondary line of defence against water penetration into the building structure. ☐☐ 5 timber and 2 steel frame fire rated options. ☐☐ 4 structural bracing options. ☐☐ A range of environmental noise options. ☐☐ BRANZ Appraised for buildings within the scope of NZS 3604. ☐☐ Specific Engineering Design (SED) information available. ☐☐ Ease of handling – no harmful dust created.

For more information call the GIB® Helpline 0800 100 442 or visit www.gib.co.nz/weatherline


Beach Racket and Ball Set With any 4L Wattyl purchase

Promotion runs from 1st December 2019 to 31st January 2020. While stocks last.

Decking

The ideal Stainless Steel Screw for Timber Decking SPAX Decking Screw

particularly suited for coastal and corrosive areas Available in 304 A2 or 316 A4 stainless steel Permanent protection against corrosion Cylinder head Fixing thread

SPAX typical ground serrations T-STAR plus recess CUT point Easy screwing*

*We recommend pre-drilling. When using garapa timber, please seal the timber before laying to avoid tannin staining. SPAX PACIFIC PTY. LTD. · ALTENLOH, BRINCK & CO - GROUP New Zealand · PO Box 55104 Eastridge · Auckland 1146 I Phone: 09 570 7447 I info@spaxpacific.co.nz

www.spaxpacific.com

Get FREE accessories with every SPAX Bonus Pack!


22

THE APPRENTICE The money maker and the beat maker.

The apprentice diary: entry #19 Client: “We really want to be in by Christmas.” Builder: “Sure thing, we’ll make it happen.” The dreaded promise It’s highly likely that you or your boss has had the ‘in by Christmas’ conversation with your client over the past 2-3 months. It’s a common promise made by builders before the final push to get clients into their house, but it doesn’t make our lives any easier. It does however mean that everyone must pull together for the run into the festive season. I’m just glad I’m not a painter or carpet layer, as they are usually the ones working until late evening on Christmas Eve, when everyone else is on their 4th beer (or more).

Reflecting on the last 12 months The mention of Christmas makes me start to reflect on how far I’ve moved on in a year. What project was I working on 12 months ago, what tasks were new, and how they seem like distant memories, as I’ve since repeated them and become more confident. Some of the biggest things have been, landing and fixing structural steel, reading and further understanding plans, helping to run sites, and dealing with subbies and inspectors. It’s these last two that have been the biggest eye-opener, as understanding how they work, and how to make their life easier forms how I will operate in the future. This hopefully will be as a foreman, and beyond that, maybe a building business owner. I’m talking a few years away, but it’s still good to have ideas on what lies ahead.

Nearly done It’s with these thoughts that I turn to my apprenticeship, I’ve just ticked past my 3rd year,

and as I enter my 4th, I hope to get signed off this side of Christmas. I only have a few things, mainly practical, left to do. I think I’m ready. I know I don’t know everything, far from it, I’ve only just begun really, but I am starting to believe I have a good understanding of the basics of building, and with a bit of guidance here and there, I can be left to get on with most tasks.

We’ve all earned a break and a few beers Right, it’s time for Christmas parties, and festive cheer. I hope you all have a good break, eat lots, drink lots (but don’t drive), and enjoy your time with family and friends. I know for me, this time of year is why I work hard for 11 months, so I can have a nice relaxing 4 weeks off in the sun at the end. Till next time, Merry Christmas and have a Happy New Year.

by Stu Foster Apprentice

Stu's knowledge nugget Always make sure you have the two most essential tools for any jobsite. The money maker (apron) and the beat maker (radio, no matter what condition it's in).


Carefully Crafted Natural Timber Decking Vulcan Decking by Abodo Many premium hardwood decking timbers are imported from countries with unsustainable forestry and high corruption. Unfortunately, not all local timbers are created equal either. Even though some New Zealand pine decking may be sustainably grown, it can still contain preservatives that can be harmful to people and the environment. So Abodo has changed that. Our Vulcan Decking uses plantation-grown, rapidly renewable New Zealand pine, and is free from harmful chemicals. We use a heat and steam-based technology known as Thermal Modification to permanently alter the cell structure of the wood, which results in a stable, durable and low maintenance timber – naturally. Thermal modification also imparts a dark chocolate brown colour to the wood.

What is Thermal Modification? Thermal modification permanently alters the cells of timber, effectively reducing the moisture that is held inside the cells.

Before Kiln Drying

After Kiln Drying

After Thermal Modification

Water is held in the cell walls along with the cell itself.

Some water is still held in the cell walls.

The cell walls collapse and fuse together, permanently reducing the ability of the cell wall to store water.

Vulcan Decking is available in long, fixed length bundles from 3.6-6.0m and is Forest Stewardship Council (FSC) certified. Abodo timber is 100% grown and processed in New Zealand, consistently ranked the world’s least corrupt country.

P +64 9 249 0100 E info@abodo.co.nz W abodo.co.nz


24

Free building standards

LBP CODEWORDS

Over 120 building standards used for Building Code compliance have been funded for free download thanks to a collaboration between the Ministry of Business, Innovation and Employment and Standards New Zealand. This is great news for the building and construction sector as it will reduce financial barriers to achieving Building Code compliance. As the building system regulator, MBIE has chosen to fund these specific standards as they are primary references for Building Code compliance. New Zealand is one of the few countries in the world to sponsor free access to building standards, which has been made possible through the use of the building levy. This initiative is a follow-up to the highly successful pilot launched in December 2017, when MBIE sponsored six building standards for free download. In the past 18 months, those standards have been downloaded over 15,000 times. The newly funded 120 standards, released in July 2019, were downloaded 60,000 times in the first month.

Benefits of using standards Standards are an accepted method for standardising the way things are done. They provide consistency and certainty about methods for manufacture and testing. Standards are used across the construction industry to enhance products and services, improve safety and quality, set industry best practice and support international trade. Standards New Zealand uses expert technical committees to develop standards. This is often done in partnership with other organisations such as Standards Australia or the International Organization for Standardization (ISO).

Key funded standards The MBIE-funded standards were selected because they are referenced in Acceptable Solutions and Verification Methods that enable compliance with the Building Code. International and joint standards (such as AS/NZS) are not included in the sponsorship agreement as copyright for these documents isn’t owned by Standards New Zealand. MBIE is continuing to work with Standards New Zealand to find options to extend the number of sponsored standards available for free download.


25 Timber-framed construction

Other funded standards relevant to timber-framed buildings include NZS 3602:2003 Timber and Woodbased Products for use in Building and NZS 3640:2003 Chemical Preservation of Round and Sawn Timber, which, when read in conjunction with Acceptable Solution B2/AS1, are used to select appropriately treated timber for building work.

Concrete and masonry work A companion standard to NZS 3604:2011 is NZS 4229:2013 Concrete Masonry Buildings Not Requiring Specific Engineering Design, which describes methods for the design and construction of concrete masonry in buildings up to three storeys. It should be read in conjunction with Acceptable Solution B1/AS1. Also being funded are NZS 3109:1997 Concrete Construction, NZS 4210:2001 Masonry Construction: Materials and Workmanship, NZS 4230:2004 Design of Reinforced Concrete Masonry Structures and SNZ HB 4236:2002 Masonry Veneer Wall Cladding.

Contract template When undertaking building work valued at $30,000 or more, it is mandatory to have a written contract. This is made easier with the template building contract provided by NZS 3902:2004 Housing, Alterations and Small Buildings Contract.

Codewords Quiz 1 1. Where can you download free buildingrelated standards? a. standards.govt.nz b. lbp.govt.nz c. mbie.govt.nz d. building.govt.nz 2. Why has MBIE funded building-related standards so they can be downloaded for free? a. Standards are overpriced. b. To reduce the cost of using standards, so that people are more likely to use them, leading to better outcomes in the construction industry. c. To encourage using the digital versions of standards. 3. How are standards developed? a. They are dictated by what the government regulates. b. They are developed by expert technical committees. c. They are developed by manufacturers to specify how to use their products.

Energy efficiency

D

DESIGN

EP

EXTERNAL PLASTERING

Download these and other funded building standards from www.standards.govt.nz/ SITE BRICK & sponsored-standards/building-standards/ BLOCK LAYING

S

BB

C CARPENTRY

F FOUNDATIONS

A

R

This article is relevant to these classes: ROOFING

ALL

Answers: 1.a 2.b. 3.b.

Another standard that will continue to be available for free download is NZS 4218:2009 Thermal Insulation – Housing and Small Buildings. When read in conjunction with Acceptable Solution H1/AS1, it provides a way of complying with the New Zealand Building Code for the thermal insulation of houses for energy efficiency.

ADD TO LBP ACTIVITY LOG This article is from Codewords Issue 92. Use the ITM App to log your activity today.

LBP CODEWORDS

NZS 3604:2011 Timber-framed Buildings is a key document for many Licensed Building Practitioners (LBPs). When read in conjunction with Acceptable Solution B1/AS1, it describes Building Code compliance methods for the design and construction of timber framing in buildings up to three storeys high.


26

LBP CODEWORDS

Tips on LBP ID cards Anyone can ask to see evidence of your LBP licence at any time so it pays to keep the photo current and always carry your LBP ID card with you when on the job. Under the Building Act, licensed building practitioners (LBPs) must produce evidence of being licensed when asked. Identification (ID) cards are a simple way to verify your identity as an LBP. You can also use your licensing confirmation letter from the Registrar as evidence, but this is less practical when working on site.

PERSONAL D REPLACEME ETAILS AND NT ID FORM

You must req

uest a replace ment License your card is d Building Practitione lost or stolen, r identificatio or n card if: your legal nam e changes from the name on your appea the card and rance has ch the register anged from or the photo o n the Licens Send the com ed Building pleted form Prac titioner to: identificatio The Registra n card. r Licensed Buil ding Prac titio ner Scheme Ministry of Business, Inno vation and Porirua 524 Emp loyment PO 0 Box 500 41 A.

B.

C.

LICENSING BU Please pro

ILDING PR AC

vide your con

tact details

Given names:

TITIONERS PE

to ensure our

records are

RSONAL DE

correct.

TAILS SECT ION

Surname: BP number: Pos tal address Street address

:

: Suburb:

Town/city:

Pos tcode:

Country :

ID cards provide easy proof Anyone is entitled to ask to see evidence of your licence. It is an offence to fail to produce this evidence, so make sure you have a way of demonstrating your licence status.

CONTAC T DETAILS Home

Daytime

Mobile

Email address:

If someone asks to see your licence, they may just be doing their due diligence, so there is no need to be offended or worry that they doubt your ability as a tradesperson.

Replace lost, stolen or damaged cards To replace your card, you will need to complete a Personal Details and Replacement ID form. The charge for a replacement card is $50.

T ID C AR D R E A SONS FOR R EPL ACEMEN Please select from the following

Your name has changed – Complete   You wish to update your photo o on page 4

section A, Payment and Declaratio

n the identification card – Com

Update your ID photo occasionally Currently, there is no time limit for how long you can keep your ID photo. When you relicense, we will automatically use the photo from your last licence. However, it’s important that your photo still looks like you, so you may want to update it from time to time. The best time to update your photo is prior to relicensing, as when you relicense, a new ID card is automatically printed using the photo we have on file. If you are relicensing using a paper application, you can attach a physical photo to the application form and send them in together.

on page 4

n section on page 4

plete section B, Payment & Declaratio

n section

NAME (S) HAVE CHAN GED My legal name has changed (if

already licensed):

anged you must sen Note: If your legal name has ch s: copies of one of the following document > a marriage or civil union certific

> a name change certificate or o

d in certified proof of this nam

ate which records the new nam

e change which includes certifie

d

e;

ch records the new name;

fficial copies of a name change d

eclaration.

My new given name(s) are: My new surname is:   My current licence class identifica

You will also automatically receive a new licence card when you relicense.

& declaration sections.

Payment and Declaration section

SEC TION A

> a re-issued birth certificate whi

The Personal Details and Replacement ID form (PDF) is available on the LBP website www.lbp.govt.nz

options and complete the payment

Your card is lost or stolen – Complete

I have destroyed my licence cla

www.lbp.govt.nz

tion card is attached.

ss identification card.

M PAGE 2 ND REPL ACEMENT ID FOR L B P : P E R S O N A L D E TA I L S A

When relicensing online, you will need to email or post the photo to us before you relicense online – allowing 10 working days for processing. If you want a new ID card with a new photo before your annual relicensing round, you will need to pay the $50 replacement fee. If you combine updating your photo with relicensing, there is no extra charge as a new ID card is included.

Make sure the ID photo is right The photo you provide needs to meet a range of requirements. We recommend aiming for the same


27

☐☐ ratio of 3:4 – width to height ☐☐ sized between 45–50 mm high and 35–40 mm wide for printed photos ☐☐ between 50 KB and 5 MB in size and JPEG or JPG file format for digital photos ☐☐ taken with a clear, light-coloured background ☐☐ even lighting so that there are no shadows on your face ☐☐ undamaged – no ink, staples, pins, paper clips or folds ☐☐ showing your face, head and shoulders looking directly at the camera ☐☐ no hat, sunglasses or other accessories that obscure your face ☐☐ no signs of alteration. Pharmacies, PostShops and photograph printers may offer ID or passport photo services where they take your photo and provide you with printed and emailed copies. These services may be helpful if you are unsure how to take a photo that will meet the requirements. A passport quality photo will meet all the requirements for an LBP ID.

A digital photo is fine You can send in a digital photo to use on your ID card as long as it meets the requirements above. Currently, there is no facility to upload a photo when relicensing through the online portal. To update the photo we have on file, email it to us at info@lbp.govt.nz Ensure you include your LBP number and a request to update your photo. You will need to allow time for your email to be processed before you relicense to ensure the photo on file is updated before your next ID card is printed.

Tell us if your name changes

D

2. Who can ask to see evidence of your licence? a. Potential employers. b. The homeowner. c. Council inspectors. d. Anyone. 3. Do you need to notify MBIE if you legally change your name? a. Yes, it needs to be updated on the public register and your ID card. b. No, MBIE will automatically know if your name has been changed. 4. What kind of photo can you use for your LBP ID card? a. A selfie. b. A passport-quality photo, printed or digital. c. An airbrushed photo.

ADD TO LBP ACTIVITY LOG

BB

This article is from Codewords Issue 92. Use the ITM App to log your activity today.

The Personal Details and Replacement ID form (PDF) is available on the LBP website www.lbp.govt.nz. Just enter “replacement CARPENTRY FOUNDATIONS ID form” in the search field at top right of web page.

C

F

A

R

This article is relevant to these classes: ROOFING

1. Which document is NOT suitable to prove you are a licensed building practitioner? a. LBP ID card. b. Letter from the Registrar confirming your licence. c. Driver licence.

EP

If your name has changed it will need to be EXTERNAL DESIGN PLASTERING updated on your ID card and in the public register. To notify us that your name has changed, please fill in the Personal Details and Replacement ID form. We may require certified legal documentation that SITE BRICK & BLOCK LAYING your name has been changed.

S

Codewords Quiz 2

ALL

LBP CODEWORDS

☐☐ high quality in colour – black and white photos are not acceptable

Answers: 1.c 2.d. 3.a. 4.b

standard as a passport photo to ensure it will be accepted. Some of the requirements include:



29

After 30 successful years of trading, Coromandel Timber ITM is now under new ownership, with Larry and Joan Knudsen, who have owned the business since 1966, passing the baton onto Rowan and Sharon Toms from East Auckland. “We’re really looking forward to sinking our teeth into the owner-operator model of the ITM cooperative,” says Rowan, who was Branch Operator at Pakuranga Placemakers prior to taking over the Coromandel business. Since 2005, Rowan has held a variety of trade sales and operations roles, and spent much of his energy driving business growth and strong customer engagement.

“What appeals to Sharon and I about ITM is the owner-operator model. It means we can really immerse ourselves in the local community and most importantly, build relationships with our new customer base.” Rowan and Sharon have a strong affinity with Coromandel. “We have been holidaying there regularly over the last decade. We know lots of people in the area and we see this as an opportunity to use our combined skills in a business that supports the Coromandel community and it's economy. “This is a long term move for our family and we are all looking forward to a change of pace from Auckland and this new journey ahead.”

Building on success Rowan says he has no immediate plans to make any significant changes.

Developing relationships “This is a really significant move for our family,” says Rowan. “We’re excited about the challenges of owning our own business and further developing the strong local relationships Larry and Joan have created in the Coromandel region.

“The business has been very successful and all the staff have great relationships with the community. It’s about continuing what Larry started all those years ago. David Bromley, the General Manager, does an excellent job and I see my role as supporting him and his team. “So many times, someone new comes into a business and sets about changing everything. That’s not our way. We are going to look at what we can do to best improve what they already have and just listen to what our customers want.”

ITM NEWS

New owners for iconic Coromandel business


30

ITM NEWS

Spectacular growth at Thomsons ITM Papakura When Thomsons ITM shifted into new premises in Papakura in August, they expected a good reaction from their customers. But even the most optimistic projections were exceeded almost immediately: Sales volume went up by 50% in just one month. “It’s definitely taken us to a new level for sure,” says Thomsons ITM branch manager Steve O’Brien. “Our customers were really positive about the move, but we didn’t expect such huge gains straight away. It’s a great example of what happens when you listen to what your customers want.” While Thomsons ITM had been planning to expand their offering in South Auckland for some time, it wasn’t until they commissioned a major survey of their customers in late 2018 that the plans crystallised.

Listening to the customer “It became obvious that we needed to greatly expand our offer product wise,” says Steve, “and to make the overall shopping experience easier and more convenient. “Our old Drury store had major limitations in terms of size, layout and the ability to expand. The business had doubled in size in three years and we simply couldn’t cater to the increasing demand.”

The new Papakura store in Hunua Road is only 5kms from the old store, but a world apart in every respect. With a 6000m2 footprint, including 3000m2 of covered storage, the new facility been configured to provide the ultimate in drive-through convenience. “Customers can drive their utes and trailers right up next to the product they want, so it’s a much easier shopping experience. Also, we’ve expanded our range and trebled our stock offer. We’re confident saying now that we truly are a one-stop shop.”

Totally trade focussed According to Steve, most of the other building supply outlets in the area are “retail focussed, whereas we are totally trade focussed, and customers see that as a big advantage. “We have a combined resource of over 60 years experience at our trade counter and many of our staff have been with Thomsons for over 10 years. For our trade customers, that knowledge is a real point of difference. “Now we’ve got the space, we can invest further in the business, which is what the Thomson family has always done.” A 20 UG 19

THE LATEST

SIGN UP FOR BUILDING BUSINESS TODAY! Reading this will contribute to your LBP skills maintenance requirements. It’s quick and easy to subscribe online. www.itm.co.nz/subscribe

NEWS FROM

s Report reveal uction constr alarming e rates worker suicid

LIST

IES SPECIA

NG SUPPL

YOUR BUILDI

ISSUE 86

your Protecting as reputation you grow

ies The legalit rs' of builde warranties

11

07

03

lse de Impu The Paslo otion Pair prom is back Highlights

05

®

ords LBP Codews and Quizze 24

SIX ISSUES PER YEAR

plus a monthly email newsletter. (Make sure we have your email address)


CLEANING

Prices valid until December 24th 2019 or while stocks last.

Outdoor Cleaner Concentrate

Deck and Fence Cleaner with Oxy-Solve

High Reach Sprayer Exterior Window Cleaner

# SG35002

# SG35060

# SG25025

• Removes tough stains caused by mould, mildew, lichens, algae, mosses, fungi, dirt and soot • Uses automatic direct dilution sprayer • Safe and gentle on the environment, plants and pets • Makes 50L of active product • No bleach, acids or caustics and septic tank safe

• Eliminates black mould and mildew from any exterior washable surface - wood, concrete, iron • Simple hose-on application makes up to 50L of active product • Safe around plants and pets • Bleach-free and readily biodegradable • Non-toxic and septic tank safe

• Easy hose-on application with the ability to reach second story windows • Easy rinse off using hose-on applicator no need to squeegee or wipe • Non-toxic and septic tank safe • Streak-free • No ammonia

$25 EXCL GST

$18 EXCL GST

$18 EXCL GST

We live to support those who live to build NORTHLAND ☐ Bay of Islands ITM Haruru, Paihia 09 402 7703 ☐ Dargaville ITM 09 439 8730 ☐ Far North ITM Kaitaia 09 408 3927 ☐ Far North ITM Mangonui 09 406 0048 ☐ Mangawhai ITM 09 431 4963 ☐ Waipu ITM 09 432 0203 ☐ Whangarei ITM 09 437 9420

AUCKLAND ☐ Albany ITM 09 415 6889 ☐ Dayle ITM Avondale 09 828 9791 ☐ Dayle ITM East Tamaki 09 274 4942 ☐ Dysart ITM Glen Innes 09 521 3609 ☐ Hillside ITM Glenfield 09 443 8101 ☐ MacClures ITM Henderson 09 836 0088 ☐ Mahia ITM Takanini 09 267 0234 ☐ Matakana ITM 09 422 7525 ☐ Pukekohe ITM 09 238 3678 ☐ NEW LOCATION Thomsons ITM 67-69 Hunua Road, Papakura 09 294 9410 ☐ Tuakau ITM 09 236 8226 ☐ Waiuku ITM 09 235 7289 ☐ Warkworth ITM 09 425 1021 ☐ Weck’s ITM Patumahoe 09 236 3684 ☐ Western ITM Kumeu 09 412 8148 ☐ Western ITM Swanson 09 832 0209 ☐ Western ITM Whenuapai 09 416 8164

WAIKATO/BAY OF PLENTY ☐ Acorn ITM Hamilton 07 856 6789 ☐ Cambridge ITM 07 827 0953 ☐ KKBS ITM Katikati 07 549 0689 ☐ Matamata Post and Rails ITM 07 888 8189 ☐ Mount ITM Mt Maunganui 07 928 4942 ☐ Opotiki ITM 07 315 5984 ☐ Otorohanga ITM 07 873 8079 ☐ Tauranga ITM 07 541 1232

☐ Omokoroa ITM 07 552 5770 ☐ Thomsons ITM Hamilton 07 849 3674 ☐ Thomsons ITM Whatawhata 07 829 8518 ☐ Timmo’s ITM Te Awamutu 07 871 7545 ☐ Triangle ITM Tokoroa 07 886 6611 ☐ Whakatane Timber & Hardware ITM 07 307 0031

COROMANDEL ☐ Barrier ITM Tryphena 09 429 0466 ☐ Coromandel ITM 07 866 8848 ☐ Dayle ITM Kopu 07 868 9829 ☐ Pauanui ITM 07 864 8579

CENTRAL NORTH ISLAND ☐ Braithwaite ITM Taumarunui 07 895 6881 ☐ Central ITM Feilding 06 323 3400 ☐ Central ITM Marton 06 327 5458 ☐ Hometown ITM Foxton 06 363 8049 ☐ Manawatu ITM 06 356 9490 ☐ New Plymouth ITM 06 758 8939 ☐ Stratford ITM 06 765 7800 ☐ Taupo ITM 07 378 9899 ☐ Tumu ITM Dannevirke 06 374 4260 ☐ Turangi ITM 07 386 5736 ☐ Waitara ITM 06 754 8822

HAWKE’S BAY ☐ Tumu ITM Gisborne 06 868 9599 ☐ Tumu ITM Hastings 06 873 0999 ☐ Tumu ITM Havelock North 06 872 9600 ☐ Tumu ITM Napier 06 872 6222 ☐ Wairoa ITM 06 838 7332

WELLINGTON/WAIRARAPA ☐ Crighton ITM Greytown 06 304 7193 ☐ Crighton ITM Levin 06 368 4057 ☐ Crighton ITM Seaview 04 568 3896 ☐ Parapine ITM Upper Hutt 04 527 6800

☐ Tawa ITM 04 232 5999 ☐ Tumu ITM Masterton 06 370 6060

NELSON/MARLBOROUGH ☐ Blenheim ITM 03 578 3049 ☐ Havelock ITM 03 574 1018 ☐ Kaikoura ITM 03 319 5447 ☐ Motueka ITM 03 528 7254 ☐ Nelson ITM 03 548 5487 ☐ Picton ITM 03 573 6888 ☐ Takaka ITM 03 525 0005

CANTERBURY/WEST COAST ☐ Ashburton ITM 03 307 0412 ☐ Basher’s ITM Amberley 03 314 8311 ☐ Darfield ITM 03 318 7474 ☐ Dyers Road ITM Bromley 03 373 6049 ☐ Geraldine ITM 03 693 9397 ☐ Greymouth ITM 03 768 0441 ☐ Hamptons ITM Waltham 03 374 3333 ☐ Hillside ITM Hornby 03 349 9739 ☐ Kaiapoi ITM 03 327 8829 ☐ McMullan Timber ITM Hokitika 03 755 8519 ☐ McVicar ITM Harewood 0800 191 674 ☐ ProBuild ITM Rolleston 03 324 3300 ☐ Rangiora ITM 03 313 4862 ☐ Timaru ITM 03 688 8074 ☐ Waimate ITM 03 689 7427

DUNEDIN/OTAGO/SOUTHLAND ☐ E H Ball ITM Invercargill 03 218 3787 ☐ Fraser Hardware ITM Balclutha 03 418 0170 ☐ Gore ITM 03 208 0649 ☐ Mosgiel ITM 03 489 8885 ☐ Southbuild ITM Winton 03 236 6055 ☐ Southern Lakes ITM Alexandra 03 445 0081 ☐ Southern Lakes ITM Cromwell 03 445 0081 ☐ Southern Lakes ITM Queenstown 03 451 1567

FOR YOUR NEAREST ITM STORE PHONE 0800 FOR ITM OR VISIT ITM.CO.NZ PRODUCTS ON PROMOTION: All prices exclude GST. Prices are valid December 2 until December 24, 2019 unless specified otherwise. Some products may not be available in all ITM stores, but can be ordered in. FREE ITM Beach Cricket Set: Applies to purchases made between December 2 and December 24, 2019 and only while stocks last. Please note, unless stated, the $200 (excl GST) qualifier for the FREE ITM Beach Cricket Set applies to the products on the specified page only and cannot be made up of products purchased from other pages e.g. customers will qualify for the giveaway if they spend over $200 on products on page 6 (Hand Tools) only, NOT if they spend $100 on page 6 products and $100 on page 17 products (ladders). Purchases must be made on one invoice/account. Offer is limited to one per customer


New Zealand. Always.

In this changing world, there’s one thing we want to stay the same. Our country. We want it to be as beautiful as In this changing world, there’s one thing we want to stay the same. Our country. We want it to be as beautiful as it is now, for the generations of Kiwis to come. Everything we do, from using over 80% recycled glass to careful it is now, for the generations of Kiwis to come. Everything we do, from using over 80% recycled glass to careful water and energy conservation at our plant, ensures that we strive to minimise any negative impact on the water and energy conservation at our plant, ensures that we strive to minimise any negative impact on the environment. It’s how we recently earned a highly prized EPD, an Environmental Product Declaration. Look for environment. It’s how we recently earned a highly prized EPD, an Environmental Product Declaration. Look for it on our packaging. It means when you choose Pink® Batts®, you’re selecting an insulation product that works it on our packaging. It means when you choose Pink® Batts®, you’re selecting an insulation product that works beautifully always while helping keep New Zealand beautiful - too. beautifully always while helping keep New Zealand beautiful - too.

KB0063 NZ Always Build.indd 1

15/08/19 3:18


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.