CATALOGUE 2014/1
Tools and machines for floor layers
Turtle pads For dry sanding and polishing of marble, terrazzo, granite, concrete, etc. A truly versatile system allowing you to renovate and polish floors and table tops of natural stone and concrete without all the mess you would get when sanding wet! The abrasive material is diamonds embedded in a heat resistant resin. The pads are therefore “self-sharpening” and long-lasting. Velcro backside for easy mounting on grinders, polishing machines, satellite discs or delta sanders. Depending on the desired end result and depending on how damaged the surface is you can choose from five different grits.
Renovation of marble Before: Scratched marble covered with old polish/ varnish which have turned yellow. After: The original gray, white and pink marble shows without scratches.
Delta sander pads are ideal for corners.
Halfmoon pads are ideal for renovation of concave moldings.
Precautions The Turtle pads are approved for use on grinding machine with speeds up to 11.500 RPM, but please be careful not to overheat the surface. Move quickly over the surface and avoid applying excessive pressure. Overheating the surface could result in discoloration.
Can be used on handheld machines as well as mounted on satellite discs – like the iTOOLS Turbo Disc.
Renovation of terrazzo Before: Old discolored terrazzo with calcium residues and ingrained dirt. After: Renovated terrazzo with all the original colors. 105710
Ø125, G50
105760
Delta pad G50
105720
Ø125, G100
105770
Delta pad G100
105730
Ø125, G200
105780
Delta pad G200
105740
Ø125, G400
105790
Delta pad G400
105750
Ø125, G800
105800
Delta pad G800
106000
Ø150, G50
105910
Halfmoon G20
106010
Ø150, G100
105920
Halfmoon G50
106020
Ø150, G200
105930
Halfmoon G100
106030
Ø150, G400
105940
Halfmoon G200
106040
Ø150, G800
105950
Halfmoon G400
105960
Halfmoon G800
401870
Velcro pad holder, Ø125, M14
105840
Velcro adaptor, Ø125, for Turbo Disc, 4 pcs.
105970
Velcro pad holder for halfmoon-pads, Ø100
www.iTOOLS.dk
Turbo Disc
Experience the fastest and smoothest surface sanding ever when you mount our new Turbo Disc! The uniquely designed segment holders spin independently. Boosting the rotation action and covering more ground this makes the Turbo disc much more effective than discs with fixed segment holders. The segment holders are furthermore spring suspended making them follow the contours of the floor.
Easy change of segments
When mounted on the segment holders the powerful magnets hold the segments in a firm grip, yet allowing you to change the segments in seconds – without any tools!
TRISEG – a new generation of segments All our segments have been designed to perform to their best on small single disc machines. The finer grit TRISEG segments even allow you to sand a finished floor ready for a final coating!
Velcro adaptors for extra flexibility You can mount the Velcro adaptors just as easy as the segments, allowing you to use our Turtle Pads and other Ø125 pads on the Turbo Disc.
105500
Turbo Disc for Numatic, w/o segments
105510
Turbo Disc for Ghibli, Wolff (Samba etc.) w/o segments
105520
Turbo Disc for Columbus, Wolff Mambo, w/o segments
105840
Velcro adaptors for Turbo Disc, 4 pcs.
105530
TRISEG segment, G20, Red, 4 pcs.
105660
TRISEG segment, G20 SF, Grey, 4 pcs.
105540
TRISEG segment, G70, Brown, 4 pcs.
105670
TRISEG segment, G70 SF, Yellow, 4 pcs.
105550
TRISEG segment, G120, Purple, 4 pcs.
105680
TRISEG segment, PCD Split, Black, 4 pcs.
www.iTOOLS.dk
Sand more m2 for less money with the iDISC!
Upgrade your single disc machine to be able to sand all surfaces the most cost effective way possible Have you set yourself up for an up-to-date, effective and economic sanding of all surfaces? Or do you still curse at difficult surfaces and a huge consumption of sandpaper and carbide discs? The solution is right at hand: You only need to upgrade your single disc machine with an iDISC from iTOOLS. The unique design and the high quality of the segments offer you a well-priced and long lasting sanding disc.
The iDISC is incredibly suitable for renovation projects where a level floor is desired, since the disc is quite stiff and therefore sand down any bumps.
One disc plate for all jobs!
Easy change of segments with magnetic locks
106060
Disc plate for Numatic, Woodboy, etc. Without segments.
106070
Disc plate for Sandy, Ghibli, Wirbel, Pajarito, etc. Without segments.
Choose the disc plate that fits your machine. If it’s not listed, we can custom made disc plates for most machines. Then choose the segments that you need to solve the sanding task. When you meet new challenges or when the segments eventually are worn down, you only change the segments themselves. One disc plate for all jobs! Simply. Easily. And money saving! 106080
www.iTOOLS.dk
Disc plate for Columbus, Wolff, Roll, Bison, etc. Without segments.
Solutions for all sanding tasks! Grit 20 Medium Floor All-round segment for medium hard and hard floors. Art. # 105530 (4 pcs.)
Grit 20 Soft Floor With the complete range of iTOOLS segments you are finally able to negotiate all the sanding tasks you will face! Years of hands-on experience has enabled us to develop a conclusive range of top quality segments which enables you to sand and grind all surfaces and materials you will meet on the job.
All-round segment for soft and uneven floors. Art. # 105660 (4 pcs.)
Grit 70 Medium Floor Optimized for fast sanding of freshly laid screed. Art. # 105540 (4 pcs.)
All our segments have been designed to perform to their best on small single disc machines. We have developed the base plates and the segment blocks uniquely for single disc machines in order to • cover a larger area than generic segments • remove as much dust from the sanding action as possible • minimize scratches
PCD Split Flakes of PCD (polycrystalline diamond) removes paint, action back, etc. Art. # 105680 (4 pcs.)
Diamonds versus other sanding options Diamond segments are incredibly aggressive because the diamonds keep the same grit and sharpness the whole life. Unlike tungsten carbide, carborundum and sand paper, where the sanding effect rapidly deteriorates because of the rounding of the grains.
PCDxtreme Aggressive segment with 4 PCD blocks for removal of thick glue, tile mortar, carpet backside, etc. Also for grinding away concrete and screed. Art. # 106050 (4 pcs.)
www.iTOOLS.dk
Segment selector Subfloor Grit 20 Medium floor Art. # 105530
Hard concrete or similar Soft concrete or similar Screed, only the "tops"
Screed, renovation Mastic asphalt
Epoxy, thin layer Polyurethane
(4 pcs.)
Grit 20 Soft floor Art. # 105660
(4 pcs.)
Grit 70 Medium floor Art. # 105540
(4 pcs.)
PCD Split Art. # 105680
(4 pcs.)
Glue thin < 1 mm Glue thick > 1 mm Fixation adhesive Tile mortar
Cardboard
(4 pcs.)
Paint, tough
Carpet backside
PCDxtreme Art. # 106050
Jute/Action back
Best choice
Watch out for bolts and screws! Please remove all foreign objects from the floor before sanding. The segments can be destroyed running over metal.
Hard or soft surface? Please perform a scratch test to determine if you should use segments for hard or soft concrete (or similar) or segments for epoxy or tough paint.
Have you chosen the right segments for the job? Please monitor the wear of the segments closely. For the first time after approximately half an hour. Change the segments if the wear is unusually.
How to mount the PCDxtreme segments correctly Please mount the PCDxtreme segments so the arrow on the segments point in the same direction as the rotation of the machine.
www.iTOOLS.dk
Perform a scratch test to choose the right segments! This simple scratch test will help you determine the hardness of the floor so you can choose the right segments for the job.
Hard concrete or similar
Soft concrete or similar
Superficial scratch, no material build-up
Deeper scratch, material build-up
The segments will last longer and you will be more effective when you use the right diamond segments for the job. This simple test will give you a good indication whether the floor is hard or soft, or whether the surface is epoxy or tough paint.
.
Epoxy or paint The surface is considered to be epoxy, if flakes appear on top of the surface when scratched, and if you experience that the scratch opens due to the release of tension. Use the 105530 Medium Floor segment
How to perform the test You will need a ruler or a straight piece of metal (approx. 30 cm), a sturdy knife and new trapezoid blades.
The surface is considered to be tough paint, if the surface does not flake when cut open. You cut the surface like it was butter. Use the 105680 PCD Split segment Epoxy
Paint (tough)
Flakes appear on the surface ,
No flakes
Place the ruler on the floor and make a cut with a new blade applying a good solid pressure on the knife. Use a new blade for every scratch made. Investigate the scratch thoroughly.
Hard or soft concrete (or similar) The floor is considered to be hard, if the scratch is superficial, and if there is no build up of material alongside the scratch. Use the 105530 Medium Floor segment The floor is considered to be soft, if the scratch goes deeper into the floor, and if the material builds-up alongside the scratch. Use the 105660 Soft Floor segment
www.iTOOLS.dk
ezFLOOR 500 / ezFLOOR 750 Powerful planetary sander solves all flooring tasks! Having searched for years, we have finally found a powerful multitask machine that meets the highest European standards regarding quality and finish – and requires a smaller investment than other similar quality machines.
Features • • • • • • • • • • • •
Adjustable speed from 100 to 1800 RPM Digital display shows accurate RPM 4 / 11 kW quality motor from German Siemens Planetary counter rotation for excellent sanding, grinding, polishing, etc. Planets with rubber bearing for optimal contact with the surface The segments are easily changed due to magnetic lock Integrated water tank for wet sanding or application of oil, soap, etc. Easy shift from diamond disc to Velcro disc Sturdy dust guard and connector to vacuum cleaner enables dust free sanding Adjustable handle for operator comfort Main body with electric motor can be separated for convenient transportation Optional extra weight of 25 kg.
ezFLOOR 750 – much more quality than you pay for!
Unique system with handles for easy transportation
Specifications
Rubber bearing ensures optimal contact with surface. Please notice the sturdy dust guard.
Art.number Work area Planetary disc Voltage Effect RPM Type Water tank Weight
www.iTOOLS.dk
ezFLOOR 500 401000 500 mm Ø220 400V, 16A 4 kW 100-1800 Gear 30 L 180 kg
ezFLOOR 750 401140 750 mm Ø240 400V, 32A 11 kW 100-1800 Gear 30 L 320 kg
Quality segments PCD segments
Applikation:
104810 PCDmax
Thick materials Glue >1 mm Tile mortar Carpet foam, etc. Equivalent to HTC T-Rex
105230 PCDmax LEFT
Thin materials Paint Action back Rough sanding of concrete, etc.
105850 G70MAX VSF
105690 G120MAX VSF
105700 G150MAX VSF
104170 G20MAX SF
104550 G70MAX SF
104590 G20MAX HF
VERY SOFT
105240 G20MAX VSF
Extra high sanding capacity! For extreme soft concrete etc. For very porous or very uneven concrete, etc.
SOFT
105820 G20MAX XSF
Hardness of the floor:
Extra high sanding capacity! For soft concrete, etc. For not hardened concrete (<20 days of curing)
MEDIUM
Diamond segments
Extra high sanding capacity! Finally cured concrete, etc. G70 for fine sanding of ordinary hardened concrete, etc.
HARD
104500 PCD Split
Extra high sanding capacity! Very hard concrete, etc.
Pore and Crack Filler - lithium-based
For a small amount of money you can now give your floor extra strength, remove pin-holes and shrinkage cracks, and obtain an attractive homogeneous surface! The experience gained from hundreds of thousands of treated square meters is behind the development of this water-based combination product, which consists of a specially developed nano-lithium hardener to which modified polyurethane has been added as a filler. Pore and Crack Filler is a cheap alternative to other common methods: Save up to 50 % per m2!
Use special pads, but depending upon the floor you can use both a satellite grinder and a rotary sander/single disc machine.
This is why it works Lithium silicate has some physical and chemical properties that make it ideal for hardening the surface of cement-based floors: • The lithium silicate is smaller than other silicates and therefore penetrates deeper down into the floor. • Lithium reacts with the calcium hydroxide of the cement by forming strong tricalcium silicate structures that strengthen the surface and make it more durable.
Specifications
This is what you do — in brief To put it in popular language, you ”spatulate” an unbelievably attractive surface with the help of the polishing machine. Pore and Crack Filler is sprayed or rolled onto a floor polished with grain 60/80 or with SHARK grain 100, and you abrade and distribute the fine sludge consisting of Pore and Crack Filler and the abraded material. When the floor is dry, the sludge layer is polished off, and you now have an attractive, even, and strong surface! You can choose to let the floor remain untreated if no protective after treatment is necessary.
Solids ……………..… Density (at 20°) …..…. pH value …………….. Viscosity (at 20°)…….. Dilutability ………….. Color …..…………….
Approx. 36% Approx. 1.37 gr/cm3 Approx. 11.3 Approx. 100 mPas With water Clear
Pore and Crack Filler, 5 liters
401190
Pro Guard Primer, 5 liters
401200
Pro Guard Coat’n Seal, 5 L
401210
Pads
Ø220
Ø240
Ø406
SHARK #100
401220
401230
401240
WATER GLOSS dry #100
401250
401260
401270
www.iTOOLS.dk
Pore and Crack Filler - work instructions 4) Remove the layer of sludge
1) Prepare the floor
Be sure that the floor is completely hardened and You can remove the layer of sludge when the the temperature is over 5° C. Sand the floor until it sludge/pore-filler has dried at the bottom and it is is smooth and level (grit 60/80 or SHARK #100). difficult to scratch the sludge with a knife. Vacuum the floor. Note: Pore and Crack Filler has been developed for floors with a hardness over 20 MPa. In the case of a hardness of <20 MPa and in the case of anhydrite and Famafloors suitability must first be tested. If the surface cracks or is damaged, Pore and Crack Filler may not be used!
2) Apply Pore and Crack Filler Apply Pore and Crack Filler in accordance with the instructions on the packaging. Apply with a microfiber roller/spray in these proportions: Small pores/shrinkage cracks (<3 mm) Large pores/shrinkage cracks (<6 mm)
1:9 1:5
Run over with SHARK #100 and the fine sludge will quickly appear. Work in sludge thoroughly. Rotation: Approx. 250-350 RPM.
The sludge is removed with WATER GLOSS #100 at a rotation speed of approximately 650 revolutions/minute. Note: It is good to grind with 20 pct. overlap. The floor is now ready for sealant, like Pro Guard Primer followed by Pro Guard Coat’n Seal. If you wish to have an epoxy, PUR, or acrylic coating, you can benefit from using an iTOOLS diamond segment with grain 70 to remove the sludge rather than pads.
5) Result Pore-free floor with satin shine! Sealing of cracks! Important: You must not create dry spots! Avoid Best possible surface hardening! grinding the sludge dry.
Consumption
3) Let the floor dry. The sludge should now dry completely: Summer/warm weather Spring/autumn/cold and wet Winter
2-3 hours 6-9 hours 12-16 hours
Important: The floor must be entirely dry and the sludge must have dried at the bottom. Dark spots indicate that the sludge has not yet dried.
Pore and Crack Filler
Approx. 200 m2 per. l. Higher consumption at poured concrete and poured mortar
Pads SHARK WATER GLOSS #100
www.iTOOLS.dk
Approx. 1.200 m2 (3 pads on a planetary sander) Approx. 600 m2 (3 pads on a planetary sander
Pro Guard Primer and Coat’n Seal
Primer and highly concentrated top‐coat that deep‐seals the floor and provides lasting protection against wear and spots Pro Guard Primer and Coat’n Seal is probably the best system on the market for sealing floors of natural stone concrete-/cement-bound industrial floors synthetically modified industrial floors The result is durable protection against heavy wear, industrial dirt, oil, strong cleaning products, alkali solvents, many types of acid and UV radiation. If you polish the floor after the application of each layer of Pro Guard Primer and Coat’n Seal, you can also achieve a mirror-finished surface!
This is what you do — in brief Primer and Coat’n Seal are applied as spray or with a microfiber mop. Distribute thinly and evenly with a microfiber mop and polish with a HYPER GLOSS pad.
Repeat until the desired shine has been achieved. You should use a high-speed machine capable of a minimum of 1000 RPM.
Specifications Primer: Water-based polymer solution on the basis of acrylic acid ester and styrol. Coat’n Seal: Water-based polymer solution on the basis of acrylic acid ester, styrol and butadiene. Solids Density (at 20°) pH value Viscosity (at 20°)
Primer
Coat’n Seal
Approx. 50% Approx. 1.04 gr/cm3 Approx. 7.5-9.0 Approx. 700-1500 mPas
Approx. 50% Approx. 1.01 gr/cm3 Approx. 7.3-8.3 Approx. 30-150 mPas
Pro Guard Primer, 5 liters Pro Guard Coat’n Seal, 5 liters Pads
401200 401210 Ø220
Ø240
RPM
WATER GLOSS #200
401350
401360
1,000
WATER GLOSS #400
401370
401380
1,200
MAMBA #800
401390
401400
1,800
MAMBA #1500
401410
401420
1,800
MAMBA #3000
401430
401440
1,800
Ø406
Ø480
HYPER GLOSS
401330
401340
www.iTOOLS.dk
> 1,000
Pro Guard Primer and Coat’n Seal - work instructions Steps 1-4 are the same for both Primer and Coat’n Seal. For this reason, they are both referred to simply as ”the product”.
If the previous layer is polished prior to application of the next layer, the shine that will ultimately be achieved is increased significantly.
1) Prepare the floor Finely grind/polish the floor to the desired state with WATER GLOSS and MAMBA pads. Ensure that the temperature is over 5° C. Thoroughly clean the floor so that it is free of dirt and dust.
2) Apply the product The product is applied as spray or with a microfibermop in the following proportions: Concrete Terrazzo and marble Granite Very absorbent floors
1:9 1:8 1:9 From 1:4 to 1:6
Apply the product evenly and thinly onto the floor with a microfiber mop.
4) Polishing Ensure that the product is completely dry before you polish the floor. Polish with a HYPER GLOSS pad for the best result. Use a high-speed machine capable of a minimum of 1000 revolutions/minute.
5) Use of the floor Let the products harden completed before the floor is used. Approximate time (per layer): Summer/warm weather Spring/autumn/cold and wet Winter
22-34 hours 28-36 hours 34-44 hours
Important! For the best result and the least wear of the pads you should vacuum the floor between each step. Important: Avoid creating white stripes and avoid thick layers (white film).
3) Let the floor dry. The product should now dry completely. Approximate time (per layer): Summer/warm weather Spring/autumn/cold and wet Winter
1.5 hours 3-4 hours 4-5 hours
For floors with moderate traffic/wear it is enough to apply 1 layer of Primer and 2 layers of Coat’n Seal. If heavy traffic, 2 layers of Primer and 3-4 layers of Coat’n Seal are recommended.
Consumption Pro Guard Primer
Pro Guard Coat’n Seal
Approx. 200 m2 per l. At 2 layers approx. 130 m2 per l. Higher consumption at poured concrete and mortar Approx. 250 m2 per l. At 2 layers approx. 150 m2 per l.
Pads WATER GLOSS #200-800
Approx. 800 m2
WATER GLOSS #1500-3000
Approx. 1.500 m2
MAMBA #800
Approx. 1.000 m2
MAMBA #1500
Approx. 1.500 m2
MAMBA #3000
Approx. 1.500 m2
HYPER GLOSS
Approx. 400 m2
www.iTOOLS.dk
Renovation and maintenance of concrete and stone
Pore and crack filler Pore and crack filler 5 litre, bag-in-box
401190
Ø180
Ø220
Ø240
Ø270
Ø406
Ø430
Shark, grit 100
402090
401220
401230
402290
401240
402380
Water Gloss, grit 100
401310
401250
401260
402300
401270
402390
Pro Guard Primer & Coat’n Seal
Ø480
Cleaning and maintenance
Pro Guard Primer 5 litre, bag-in-box
401200
Citrus Clean 5 litre, bag-in-box
402470
Pro Guard Coat’n Seal 5 litre, bag-in-box
401210
Floor Conditioner 5 litre, bag-in-box
402480
Ø180
Ø220
Ø240
Ø270
Ø406
Ø430
Water Gloss, grit 200
402100
401350
401360
402310
401840
402400
Water Gloss, grit 400
402110
401370
401380
402320
402220
402410
Water Gloss, grit 800
402240
402250
402260
402270
402280
402420
Mamba 1, grit 800
402120
401390
401400
402330
401860
402430
Mamba 2, grit 1500
402130
401410
401420
402340
402230
402440
Mamba 3, grit 3000
402140
401430
401440
402350
402360
402450
Hyper Gloss
402370
401330
402460
www.iTOOLS.dk
Ø480
401340
Renovation and maintenance of marble and terrazzo Ø180
Ø220
Ø240
Ø270
Ø406
Ø430
Water Gloss, grit 100
401310
401250
401260
402300
401270
402390
Water Gloss, grit 200
402100
401350
401360
402310
401840
402400
Water Gloss, grit 400
402110
401370
401380
402320
402220
402410
Water Gloss, grit 800
402240
402250
402260
402270
402280
402420
Mamba 1, grit 800
402120
401390
401400
402330
401860
402430
Mamba 2, grit 1500
402130
401410
401420
402340
402230
402440
Mamba 3, grit 3000
402140
401430
401440
402350
402360
402450
Cleaning and maintenance Citrus Clean 5 litre, bag-in-box
402470
Floor Conditioner 5 litre, bag-in-box
402480
www.iTOOLS.dk
linoPAD - for sanding and polishing of linoleum
Increase your revenue: With these revolutionizing sanding pads you can offer your customers a completely new and profitable solution for renovation of linoleum!
Worn and scratched linoleum from the 1980s
Old coatings, ingrained dirt, stains, scratches and minor wounds… Exclusively for Europe we are proud to present a solution which actually makes you renovate the linoleum instead of giving it a thorough cleaning. You will earn more money per hour renovating rather than installing new linoleum. And you add a new affordable solution to your portfolio of services, which is highly attractive in these times where the money lies deep in the pockets.
Two-stage wet sanding (linoPAD 0 & linoPAD 1)
Revenue from renovation (in Denmark) To illustrate your revenue from renovation of linoleum we have calculated a 200 m2 project:
Expenses (per m2) 2
Turnover (per m )
Renovation with soap treatment
Renovation with PUR-coating
€ 2,95
€ 5,30
€ 12,75
€ 16,75
Working hours
15 hours
18 hours
Revenue per hour
€ 130,67
€ 127,22
Here’s how The process is determined by the desired surface. Please notice that all sanding with the linoPADs
A surface treatment and the floor appear as new!
should be done with plenty of water. For the optimal removal of dirt we recommend that you use our special Power Clean detergent together with the linoPAD 1.
www.iTOOLS.dk
Want a polyurethan coating? 1: Rough sanding w. linoPAD 0 and 1 together with the Power Clean detergent, wash the floor. The use of linoPAD 0 may not be necessary. 2: Finer sanding w. linoPAD 2, wash the floor. 3: Apply 2 layers of linoPURE. Want a soap coating with a matte finish? 1 and 2: As in ”Polyurethan coating”. 3: Apply soap w. linoPAD 3. Want a soap coating with a glossy finish? 1 to 3: As in ”Soap – matte finish”. 4: Polish with linoPAD 4. You can use our hand-pad in the corners, etc. Want to remove an old polyurethan coating? Please use diamond segments G70. Want to remove old polish? Please use diamond segments G70 or a chemical polish stripper.
linoPAD Power Clean A special detergent which dissolves soap residues and embeds the dirt into the water. This allows you to extract more dirt from the surface while keeping your pad clean.
A note on machinery You will soon get finished if you use a planetary sander, where you can go up to 1.200 RPM. It also works fine with a single disc machine, where you can go up to 500 RPM. When running 150 RPM it’s recommended to add extra weight. With a hand held polishing machine you can run up to 1.000 RPM.
Why are they so effective A patented sanding compound with diamonds affixed to a specially designed pad is the secret behind the efficiency of the linoPAD. Thus you get a solution that combines the flexibility and the cleaning ability of synthetic pads with the aggressive and permanent grinding ability of diamond technology.
linoPAD 0 (turquoise) linoPAD 1 (red) linoPAD 2 (red marking) linoPAD 3 (blue marking) linoPAD 4 (green marking)
Ø430 104840 104630 104640 104650 104660
Hand pad 11 x 24 cm linoPAD Power Clean, 5 liter linoPURE, extra matte, 3 x 5 L
104790 901240 105980
Ø400 104850 104670 104680 104690 104700
www.iTOOLS.dk
Ø220 104860 104710 104720 104730 104740
Ø180 104870 104750 104760 104770 104780
Tool holders for planetary sanders Adapter bracket for HTC machines By simply mounting iTOOLS segments on these brackets, you can enjoy an efficient grinding with an affordable segment of the highest quality. Precision processing and the extra thick plate is your guarantee that the adapter, along with the iTOOLS segment, is a perfect alternative to the original segments. Screws are included.
Velcro disc for HTC machines Favourable fiberglass reinforced quality velcro disc for HTC machines. With a choice of Ø220, Ø240 and Ø270 we also have a disc for your HTC machine, including the HTC 500.
ezHOLD – the ultimate magnetic holder! You change the segments astonishingly easy by only placing a screw driver or similar in the slot beneath the segment and easily tilt it off. No need to hammer, turn, screw, or anything else that will steal precious time away from you. The ezHOLD magnetic tool holder fits our own ezFLOOR 550 and the HTC 500.
104980
HTC bracket, 1 pc.
403200
Velcro disc for HTC, Ø220
104430
ezHOLD magnetic tool holder, without segments
403400
Velcro disc for HTC, Ø240
403410
Velcro disc for HTC, Ø270
www.iTOOLS.dk
Discs for grinders Diamond sanding discs
Grinding discs
Ø centre hole: Ø125 discs = 22,2 mm Ø150 discs = 19,0 mm Ø180 discs = 22,2 mm
Velcro discs
105070
Diamond edge sander Ø60 mm, M14, G20
104420
Diamond sanding disc Ø150 mm, G20
104000
Diamond sanding disc Ø125 mm, G20
105170
Diamond sanding disc Ø150 mm, G20 Soft
105610
Diamond sanding disc Ø125 mm, G20 Soft
402150
Velcro disc Ø150 mm, M14, Alu
104890
Diamond sanding disc Ø125 mm, G70
104010
Diamond sanding disc Ø180 mm, G20
104900
Diamond sanding disc Ø125 mm, G120
104030
PCD grinding disc Ø180 mm
105640
PCD Split sanding disc Ø125 mm
403820
Velcro disc Ø180 mm, M14, rubber
104020
PCD grinding disc Ø125 mm
401890
Velcro disc Ø180 mm, M14, Alu
401870
Velcro disc Ø125 mm, M14, rubber
105080
Diamond sanding disc Ø250 mm, G20 Soft
401880
Velcro disc Ø125 mm, M14, Alu
www.iTOOLS.dk
Crack chaser Ø125 Crack chaser – the ultimate disc for repairing cracks in concrete floor With this crack chaser mounted on your hand grinder, you easily grind a V-shaped trace in the crack. The V-shaped trace ensures a far better quality of the repair compared to when making a ∐-shaped trace, due to the facts that the primer is better spread and the adhesiveness of the filler is much better. The high concentration of diamonds and the generous size of the segments are your guaranty for an extra long durability – in excess of 100 meters when tracing extra hard concrete. To be used on dry surfaces. The hand grinder must be fitted with a suitable protection shield and vacuum attachment. Centre hole: Ø 22,2 mm.
10 mm
33 mm
8 mm
104410
Crack chaser, Ø125 mm
www.iTOOLS.dk
ezMIX mixer Professional quality mixers at reasonable prices!
Durability and finish is top notch and they have features that are otherwise only found in much more expensive machines.
We have handpicked a series of quality mixers from one of the leading ISO9001: 2000 certified tool manufacturers.
All models have two gears, "soft start" and soft grip. Paddle as on the photo is included.
ezMIX basic
ezMIX twin
ezMIX digital As basic, but with readable speed and timer
Specifications
403140 Mixes heavy materials from the buttom and up.
403150 Mixes thin coatings from the top and down.
403170 Mixes heavy materials from the top and down. For ezMIX twin.
403160 Mixes coatings from side to side.
Art. #
ezMIX basic 402160
ezMIX digital 402170
ezMIX twin 402180
Effect
1.600 W
1.600 W
1.600 W
RPM
180-700
180-700
100-600
Gears
2
2
2
Stepless
Stepless
Stepless
No
1-99 min.
No
Adjustment Timer Lock button
Yes
Yes
Yes
Thread
M14
M14
2 x Hex13
403140 M14
403170 Hex13
403150 M14
403160 M14
Ø160
Ø120
Ø100
Ø160
1 pc
2 pcs
1 pc
1 pc
www.iTOOLS.dk
Stirring trolley This complete stirring trolley makes it possible for you to stir and apply up to 75 kilos (3 sacks) of screed at a time in a fast and effective way.
The 75 L barrel is produced of high quality plastic that ensures a long life time.
The trolley base is incredibly well-balanced, thus making it easy for you to move and apply this big load of screed.
The turbine stirrer is designed specifically for this stirring trolley as the turbine effect and the length of 600 mm ensures that all the screed is stirred. The stirrer is produced with a M16 interior thread. An adaptor with M16 exterior thread to M14 exterior thread is included.
The holder for the stirring machine is easily attached to the edge of the barrel. You can adjust the height of the holder and the width of the locking sleeve mount in order to fit all mixers.
You can obtain a dust free stirring by attaching our hose holder to the edge of the barrel.
103170
Complete stirring trolley
103160
Holder for stirring machine / mixer
103350
Complete stirring trolley with mixer (ezMIX basic)
103140
Turbine stirrer M16 (M14 adaptor incl.)
103090
Trolley base for 75 L mixing barrel
103060
Hose holder / dust extractor
103120
75 L mixing barrel
www.iTOOLS.dk
Holder for small mixers
Get a helping hand when mixing building materials A sturdy yet inexpensive holder for your small mixer or power drill which allows you to mix building materials with less effort. You can adjust the height of the holder and the width of the locking sleeve mount in order to fit all small mixers and power drills. You can mount the holder on most 30 L buckets since the holder simply rests on the rim of the tub.
Height adjustable
When buying the iTOOLS mixing buckets you will however get a tub produced of thick impactresistant plastic that ensures a long life time. You can reduce the dust significantly when you mount the hose bracket on the edge of the tub.
Easily separated for hand-held action
103050
Holder for small mixers
103130
Mixing bucket, 30 L
103060
www.iTOOLS.dk
Hose bracket
Upright trowel for 56 cm standard inserts Purpose This is the multipurpose trowel for you who want to use the same upright trowel for all kind of spreads â&#x20AC;&#x201C; being it screed, adhesive, epoxy etc. You easily place the insert appropriate to the job into the insert holder. The blade holder has no groove in order to make cleaning as easy as possible. The iTOOLS upright trowels are developed in close cooperation with a leading doctor in Occupational Medicine and the Flooring Academy in Viborg (DK).
Advantages -
-
-
You work much faster standing rather than on your knees You spare your back and knees and you are much less fatigued when you finish work The double jointed trowel mount imitates the movement of the hand offering the same quality of work as working on your knees You can use standard 56 cm inserts
Hand trowel When you have a 56 cm insert holder, you only need to buy the handle itself in order to make an effective and ergonomically correct angled hand trowel. The handle minimizes the stress to the wrist and the fatigue in the arm. It can be mounted for both right and left handed users.
101320 Upright trowel kit, 56 cm, w/o inserts 101330 Insert holder, 56 cm, w/o inserts 103070 Handle for insert holder
www.iTOOLS.dk
56 cm inserts for levelling compounds and screeds Inserts for levelling compounds
The iTOOLS 56 cm upright trowel is brilliant for the application of reaction resin levelling compounds (epoxy resin, polyurethane etc.), wearing layers and screeds.
A1
All inserts on this page are suitable for reaction resin levelling compounds and wearing layers.
A2
The diagram below will help you to choose the right insert for the job. If in doubt, please consult the manufacture of the levelling compound on the choice of insert.
A3
The inserts R1 and R2 can also be used for applying mineral levelling compounds, like screeds.
A4 Material applied Art. no. (10 pcs.)
Notch profile
101400 101340 101410 101420 101430 101350 101440 101450 101460 101470
Thickness1 [mm]
Consumption2 [kg/m2]
Tooth width (A)
Notch width (B)
Notch depth (C)
Angle
A1 A2 A3 A4 A5 B1 B2 B3 S1 S2
0,41 0,40 0,60 0,28 0,24 0,48 0,77 0,86 1,21 1,64
0,41 - 0,58 0,40 - 0,56 0,60 - 0,84 0,28 - 0,39 0,24 - 0,34 0,48 - 0,67 0,77 - 1,07 0,86 - 1,20 1,21 - 1,69 1,64 - 2,29
0,5 1,3 0,4 0,4 1,45 2,6 2,0 3,3 0,1 0,1
1,5 1,7 1,6 1,1 1,35 2,4 3,0 3,7 1,8 4,2
1,1 1,4 1,5 0,75 1,0 2,0 2,55 3,25 2,55 3,35
55o 55o 45o 55o 55o 55o 55o 55o 30o 60o
101360
R1
2,18
2,18 - 3,05
1,5
4,0
3,0
0o
101370
R2
3,33
3,33 - 4,67
2,0
4,0
5,0
0o
A5
B1
B2
B3
S1
Dimensions [mm]
1: Thickness can increase up to 40% depending on the surface 2: Weight is quoted without additional fillers
S2 Inserts for levelling compounds and screeds
R1
R2
www.iTOOLS.dk
(D)
Trowels for screed iTOOLS notched screed trowel Working upright enables you to apply screed twice as fast compared to when working on your knees. Buying upright trowels means that the investment will therefore be returned in a short time. And itâ&#x20AC;&#x2122;s a sound investment in more ways; working upright also prevents injury to your knees and back. The unique trowel mount imitates the movements of the hand. The iTOOLS screed trowel is therefore the first of its kind that allows you to apply screed standing upright with the same quality of work as if you were on your knees.
The notched trowel for screed has a 5x5x3 profile. Instructions on how to adjust the trowel to the individual user are included in the box. The iTOOLS upright trowels are developed in close cooperation with a leading doctor in Occupational Medicine and the Flooring Academy in Viborg (DK).
iTOOLS pin leveller for screed For application of thick layers of screed or screed with fibers, we have developed a 60 cm pin leveller with two adjustable pins that can easily be adjusted by hand from 0-40 mm.
101220
Upright screed trowel kit, 60 cm
101180
Notched spare blade, 60 cm
101130
Upright pin leveller kit, 60 cm
101200
Notched spare blade, 90 cm
101140
Pin leveller (only blade and pins), 60 cm
101150
Spare pins (2pc.)
www.iTOOLS.dk
Level pins
Measure, cut, and pour! Using these level pins, or grade sticks, is a very time and cost effective way of building new subfloors or levelling old uneven floors. Traditionally, the levelling of floors have been done via the laborious method of for instance drilling, plugging and screwing mounting screws into the floor – or even worse: by rule of thumb! The level pin method of levelling provides increased accuracy at a significant cost saving. Simply cut the level pin with scissors to the desired height, using the moulded millimeter rule along the pin. Stick the pin to the floor using the heavy-duty self adhesive base of the pin. Apply the concrete or screed until they are level with the top of the pin. Bingo – a level floor in record time! Some benefits compared to other brands: Easy-to-read millimeter scale Bright signal color makes them easily visible The covering paper is easily detachable from the self-adhesive tape
103240
Level pins, box with 100 pcs
103260
www.iTOOLS.dk
Level pins, box with 10 x 100 pcs
Tools for applying adhesive iTOOLS upright adhesive trowel Working upright enables you to apply adhesive twice as fast compared to when working on your knees. Buying upright trowels means that the investment will therefore be returned in a short time. And itâ&#x20AC;&#x2122;s a sound investment in more ways; working upright also prevents injury to your knees and back. The unique trowel mount imitates the movements of the hand. The iTOOLS adhesive trowel is therefore the first of its kind that allows you to apply adhesive standing upright with the same quality of work as if you were on your knees. The blade holder has no groove in order to make cleaning as easy as possible. The iTOOLS upright trowels are developed in close cooperation with a leading doctor in Occupational Medicine and the Flooring Academy in Viborg (DK).
iTOOLS small trolley This practical trolley facilitates the spreading of screeds and adhesives. You can use the bucket standing up or kneeling as the handle can be adjusted up/ down as well as right/ left. It is possible to lock the two back wheels for stable stirring. The trolley can be adjusted to fit almost all mixing and adhesive buckets.
102030 102060
Upright adhesive trowel kit, 28 cm (without insert) Blade holder for adhesive trowel, 28 cm (without insert)
103040
Trolley for adhesive and screed
103130
30 L mixing bucket
www.iTOOLS.dk
woolPAD - pure wool for a high gloss oil finish You will finish sooner, get a better result and you benefit the environment! Wool has several natural properties that make the oil warm up quickly and thus rapidly penetrate into the wood! Therefore it is good economy to “return to nature”: • You will save time • woolPAD lasts considerably longer than other quality pads Furthermore the content of lanolin ensures a more shiny polishing and a wax-like protective surface. Wool is among other • Extremely dimensionally stable • Elastic • Durable • Heat resistant up to 160° C
1
2
3
4
Apply the oil
Moreover you help to benefit the environment by choosing wool: • The wool is organically farmed • A minimum of energy is used in the manufacturing process • Disposal does not burden the environment
Mount a new woolPAD
Work in the oil, and let it dry
Polish the floor to desired shine
Tested and certified by:
woolPADs are thus in many ways the most natural choice when you need to treat and polish all types of flooring!
901280 woolPAD polishing pad Ø410 mm, 25 pcs. One of the happy suppliers
www.iTOOLS.dk
Tapping tools
iTOOLS sliding hammer
iTOOLS pull bar
The sliding hammer combines shunting and hammering hereby avoiding damage to tongue and groove. -
Made in 6 mm steel sheet and carefully welded to ensure optimal durability. Crowbar and angled contact face for minimal upstroke. Renewable knob in solid nylon.
The unique design of this sliding hammer ensures an ergonomically correct position of the hand and minimizes the risk of squeezing fingers.
iTOOLS tapping blocks
iTOOLS floor hammer
The tapping blocks are for those who want optimal durability and comfort:
The iTOOLS floor hammer is the tool for those who want to lay floors quickly and efficiently, avoiding sore knees and back. The floor hammer has wheels enabling it to be wheeled along the boards while they are hammered into place â&#x20AC;&#x201C; smart, fast, and efficient!
-
40, 50 cm for floating parquet 70 cm for battens / undercarriages
iTOOLS tapping blocks are cast in a specially developed durable material. The steel reinforced handle is bolted to the tapping block, ensuring a long life time.
-
You can lay more in a shorter time You avoid sore knees and back You can lay floor all day without tiring
302030 Sliding hammer, 46 cm
302040 Pull bar, 55 cm with crowbar
301130 Tapping block 400 x 70 x 20 mm
302050 Spare knob for pull bar
301000 Tapping block, 500 x 95 x 25 mm
321000 Floor hammer
301080 Tapping block, 700 x 95 x 25 mm
www.iTOOLS.dk
EZ floor wedges Patented floor wedge saves you time The patented iTOOLS floor wedges make it easy to ensure the correct distance between wall and floor boards. Using the wedges correctly avoids severe damage to the flooring when it expands due to changes in humidity. The advantages of the iTOOLS floor wedges are: - Easily adjustable from 8-15 mm - Maintain its setting - Makes the laying of the initial boards much easier - Can be used for all types of floor boards - Easy to detach the floor wedge using the uniquely designed strap - Can easily be unlocked and can quickly be used again and again The EZ floor wedge is a perfect help for professional installers, and we offer the wedges in a sturdy 100 pc bucket suitable for larger projects. The bucket enables the wedges to be easily stored and transported.
312000
Floor wedges 100 pc, bucket
www.iTOOLS.dk
ezMASK A simple tape dispenser for all tape-work on floors The days of working on your knees have come to an end when you need to hold masking paper!
ezMASK can be used for all types of tape, and the tape dispenser is designed for rolls that are up to 50 mm in width and 150 mm in diameter. The knife is activated by edging the tool, so the angle to the floor is minimized, and the tape is easily cut by pushing the ezMASK tape dispenser forward.
901090
ezMASK with handle
www.iTOOLS.dk
Tape dispenser Patented tape dispenser for all tape-work on floors The days of working on your knees have come to an end when you need to hold masking paper, masonite boards, carpets etc. or seal moist protection with single or double sided tape.
Also perfect for tape-work on walls and ceilings The tape dispenser is also perfect for applying drywall joint tape etc. to walls and ceilings. The iTOOLS tape dispenser has a unique functionality which is the foot-activated knife that makes it possible to roll out and cut the tape while you are standing up. It can be used for all types of tape, and the tape dispenser is designed for rolls that are up to 50 mm in width and 200 mm in diameter.
The length of the handle enables you to work comfortably and makes it possibly to apply the tape on hard to reach places. When working on walls and ceilings the knife is activated by edging the tool, so the angle to the wall/ ceiling is minimized.
The tape dispenser adjusts according to the diameter of the roll, which ensures an even pull and thereby a perfect roll out.
901030
Tape dispenser with handle
901050
www.iTOOLS.dk
Tape dispenser without handle
Quality rollers and brushes Selection of quality tool for those who want a perfect application of varnish, polyurethane, epoxy, paint, etc., without lint and loose hairs! Jesper Guld Nielsen, gold medal winner at the World Skills 2011, uses lint-free rollers from iTOOLS!
303310 303400 303330 303790 303280 303370 303590
Microfiber rollers Microfiber roller 100 x 8 mm Microfiber roller 250 x 5 mm, edge cut Microfiber roller 250 x 11 mm, edge cut Microfiber roller 250 x 15 mm, edge cut Microfiber roller 400 x 11 mm, edge cut Microfiber roller 500 x 11 mm, edge cut Microfiber roller 800 x 11 mm, edge cut
Polyester cast. Provides a completely uniform surface without rolling tracks. Lint-free, edge cut and very durable. Perhaps the best roller available for top-coat and varnish!
303550 303630 303750 303470 303490
Polyamide rollers Polyamide duo roller 100 x 11 mm Polyamide duo roller 150 x 11 mm Polyamide duo roller 250 x 11 mm Polyamide duo roller 250 x 18 mm Polyamide duo roller 250 x 21 mm, soft core
Polyamide roller with 2 cast polyamide materials. Solvent resistant. Lint-free and durable. Gives a very neat and even surface. Great for thicker products such as paint.
303610 303240 303510 304430 304650 303430 303450
Spiked rollers Spiked roller, PP, 250 x 21 mm, w/o bracket Spiked roller, PP, 500 x 21 mm, w/o bracket Spiked roller, PP, 500 x 35 mm, w/o bracket Spiked roller, economy, 400 x 11,w/o bracket Spiked roller, economy, 500 x 11,w/o bracket Spiked roller, steel, 250 x 18 mm, w/o bracket Spiked roller, steel, 500 x 18 mm, w/o bracket
303320 303340 303600 303390 304660 303360 303380 303420 303500 304410
Brackets and shaft Roller bracket 10 cm Roller bracket 25 cm Roller bracket 80 cm Roller bracket, adjustable 40-60 cm, U-shape Roller bracket, economy, adjustable, 40-50 cm Roller bracket 40 cm, U-shape, cross bar Roller bracket 50 cm, U-shape, cross bar Roller bracket 80 cm, U-shape, cross bar Shaft 117-200 cm, profiled aluminium Shaft 120-200 cm, economy
403230 303520 303710 303530 303700 303560
Varnish brushes Varnish brush 25 mm Varnish brush 50 mm Varnish brush 70 mm Varnish brush, with angle, 50 mm Varnish brush, with angle, 75 mm Varnish brush, with angle, 75 mm, thick
www.iTOOLS.dk
The round polypropylene spikes are rigid (donâ&#x20AC;&#x2122;t bend when cleaned) and they give a very good finish. Stainless steel spiked roller with thin spikes (0.4 mm!) for optimal removal of air. Leaves a perfect finish on i.e. polyurethane. All brackets have a durable handle. Strong galvanizing leaving no contagion. Cross bars are replaceable. The telescopic shaft is made of profiled aluminium which makes it harder to bend.
Top-quality brush. The hairs donâ&#x20AC;&#x2122;t shed! For refinishing wooden floors, and application of i.e. polyurethane and acrylic.
knee protector
Advantages
It has taken two years to develop this revolutionizing knee protector with a rubber honeycomb design, which absorb the pressure like no other kneepads for pocketed work trousers.
• •
Thousands
A revolution in knee protection!
Standard
• • •
Bare knee
Hard shell strapped kneepad
Impact (Nm2)
coolPAD knee protection
• •
Unrivalled cushioning for the knee Takes the pressure and disperse it to a larger area than other leading kneepads Designed to last 10 times longer than ordinary foam kneepads Breathable structure to reduce sweating Curved sides wrap around the knee when pressure is applied, giving great stability and a customized fit, preventing slippage Compatible with pocketed work trousers for slide-in kneepads Washable up to 190°C. Can be tumble-dried
Time
Disperses the pressure better than other kneepads!
How it works The honeycomb design and the leaf spring (red) absorb the weight of the body like no other kneepads – even on the most uneven surfaces.
The rubber honeycomb also ensures a lower wear rate and longer optimum level. 901110
coolPAD knee protector
www.iTOOLS.dk
Carpet cutter
Carpet cutter with improved ergonomics for carpets with hessian or jute backing Carpet cutter / trimmer for use with woven, tufted and pressed wall-towall carpeting material without foam backing. Fits greatly into the hand and presents the cutting blade at the correct angle to cut the carpet neatly. Molded in a heat-resistant compound which prevents the cutter to melt due to the friction. Cuts from top to bottom. The blades are easily changed by a screw release system. The blades can be rotated 4 times to present a fresh cutting edge.
202020
Carpet Cutter, 10 blades included
www.iTOOLS.dk
Smoothing tool
Your all-in-one smoothing tool for vinyl, linoleum, carpets, etc. A simple yet clever tool dedicated to make you do a better job when installing vinyl, etc. on floor and wall. • • • •
Scratch-free design with rounded corners Build-in 45° and 90° guide Comfortable grip for improved pressing action Pointed on 3 sides for optimal work in corners
103270
Smoothing tool for vinyl, etc.
www.iTOOLS.dk
Linoleum tools
iTOOLS upright scriber
iTOOLS upright trimmer
The scriber makes it possible for you to scribe semi-hard surfaces while standing up. Scribing, while standing up, is not only easier, but also quicker because of the ergonomically correct work posture. The scriber trolley can easily be adjusted accurately for each task.
Trimming is made easy with the iTOOLS upright trimmer. The first cut is made attaching a standard trim guide and the second cut with the naked blade. Use the special blade which ensures that the surface is not damaged when used correctly.
iTOOLS upright cutter The iTOOLS upright cutter allows for fast and easy cutting. The cutter is in fact also suitable for cutting carpets before stripping. The upright cutter uses standard hooked blades.
201010
Scriber (w/o telescopic handle)
204010
Trimmer (w/o telescopic handle)
202010
Cutter (w/o telescopic handle)
204020
Special knife blade (pack of 10 pc)
www.iTOOLS.dk
www.iTOOLS.dk