Sentrex® and Perma Power® High Performance and Computer Grade Rack Mount and CabinetMATE® Surge Protectors he Sentrex High Performance Rack Mount Series and the Perma Power Computer Grade Rack Mount and CabinetMATE Surge Protector Series offer a wide range of solutions for communication closet, rack, and cabinet applications. By dissipating and diverting excess voltage, a Sentrex or Perma Power surge protection device keeps your critical systems functioning properly. Surges can strike once a month or hundreds of times a day. They can penetrate a facility via AC, telephone, and communication lines, or on any wire that enters a building. Surges and noise are also generated inside a building by fluorescent lighting, electric motors, HVAC equipment and office machines. If left unprotected, sensitive communications equipment and valuable data can be damaged or destroyed. Sentrex and Perma Power rack mount and CabinetMATE surge protectors provide advanced protection for critical electronic and communications equipment. They are an integral part of the Sentrex Zoned Approach to whole building protection.
SURGE
T
R8BZ (Front & Back)
R5BZ20 (Front & Back)
Features & Benefits ■ All lines are protected. Units provide surge protection on all three modes (L-N, L-G, and N-G). Units also have thermal protection on all three lines. ■ 400V UL1449 clamping level. Outstanding protection against harmful surges. ■ EMI / RFI noise reduction. Protects against data disruption due to electromagnetic or radio frequency interference. ■ Space saving. Rack mount units fit standard 19" [482mm] relay racks. Compact 1U design takes up minimum space. 23" [584mm] units available, consult factory. ■ Low profile. CabinetMATE units offer a narrow 1 1/2" x 1 3/16" [38mm x 20mm] aluminum housing. ■ Aesthetically pleasing. Rack mount units have a black matte finish and a black cord. CabinetMATE units have a gray finish and a black cord.
■ Lighted switch available on some units. ■ Protection indication. All units have a protection indication light to show the status of the unit. ■ Resettable circuit breaker. Provides overload protection. ■ Product warranty. Sentrex rack mount units come with a lifetime product warranty. Perma Power rack mount and CabinetMATE Series units come with a five-year product warranty. ■ UL and cUL Listed or Recognized. Rack mount units are UL and cUL recognized to UL1449, the Standard for Transient Voltage Surge Suppressors, Second Edition. dated August 15, 1996, including requirements effective February 9, 2007. CabinetMATE units are UL and cUL Listed to UL1449, Second Edition, dated August 15, 1996, including requirements effective February 9, 2007.
■ Cord properly rated to load requirements. 15A units have a 14/3 SJT cord and a NEMA 5-15P plug. 20A units have a 12/3 SJT cord and a NEMA 5-20P plug.
ED638R6 – Updated February 2007 – For latest specs visit www.wiremold.com
Sentrex High Performance Rack Mount Specifications Surge Protection Circuitry UL1449 Clamping Level Maximum Surge Current Noise Reduction Response Time Product Warranty
3 element, 3 stage hybrid circuit 400 Volts (330V L-N only) 56,000 Amps (32,000 Amps L-N, 12000 Amps L-G, 12000 Amps N-G) +50 dB Less than 1 nanosecond Lifetime
Sentrex High Performance Surge Protectors Catalog No./Item
Description/Specifications
R5S/ R5S-15
High Performance Surge Protector – Six rear outlets, lighted switch. 6' [1.8m] or 15' [4.6m] cord.
Perma Power Computer Grade Rack Mount Specifications Surge Protection Circuitry UL1449 Clamping Level Maximum Surge Current Noise Reduction Response Time Product Warranty
Single Stage 400 Volts 36,000 Amps (12,000 Amps L-N, 12,000 Amps L-G, 12,000 Amps N-G) +35 dB Less than 1 nanosecond 5-Year
Perma Power Computer Grade Surge Protectors Catalog No./Item
Description/Specifications
Catalog No./Item
Description/Specifications
R8BZ/ R8BZ-15
Computer Grade Surge Protector – Eight rear outlets, lighted switch. Receptacles rotated 90° and 4 outlets spaced to accommodate transformers. 6' [1.8m] or 15' [4.6m] cord.
R5BZ20/R5BZ20-15
20A Computer Grade Surge Protector – Six 20A rear outlets. On/off switch. 6' [1.8m] or 15' [4.6m] cord.
R5BZ/ R5BZ-15
Computer Grade Surge Protector – Six rear outlets, lighted switch. 6' [1.8m] or 15' [4.6m] cord.
R5BZ20X/R5BZ20X-15
20A Computer Grade Surge Protector – Six 20A rear outlets. 6' [1.8m] or 15' [4.6m] cord.
R5BZX/ R5BZX-15
Computer Grade Surge Protector – Six rear outlets. 6' [1.8m] or 15' [4.6m] cord.
2
CabinetMATE Specifications Surge Protection Circuitry UL1449 Clamping Level Maximum Surge Current Noise Reduction Response Time Product Warranty
Single Stage 400 Volts (330 L-N only) 36,000 Amps (12,000 Amps L-N, 12,000 Amps L-G, 12,000 Amps N-G) +35 dB Less than 1 nanosecond 5-Year
15A CabinetMATE Surge Protectors Catalog No./ Item
Description/ Specifications
Catalog No./ Item
Description/ Specifications
Catalog No./ Item
Description/ Specifications
4810BCS/ 4810BDS
CabinetMATE Surge Protector – Ten outlets. 6' [1.8m] or 15' [4.6m] cord. Length 48" [1.2m].
7011BCS/ 7011BDS
CabinetMATE Surge Protector – Eleven outlets. 6' [1.8m] or 15' [4.6m] cord. Length 70" [1.8m].
7712BCS/ 7712BDS
CabinetMATE Surge Protector – Twelve outlets. 6' [1.8m] or 15' [4.6m] cord. Length 77" [2m].
j
j
3
j
20A CabinetMATE Surge Protectors Catalog No.: 2008BCS20R/2008BDS20R
Catalog No.: 4810BCS20R/4810BDS20R
Catalog No.: 7011BCS20R/7011BDS20R
Catalog No.: 7712BCS20R/7712BDS20R
Description/ Item Specifications: 20A CabinetMATE Surge Protector – Eight 20A outlets with t-slots. 6' [1.8m] or 15'. Length: 20" [508mm].
Description/ Item Specifications: 20A CabinetMATE Surge Protector – Ten 20A outlets with t-slots. 6' [1.8m] or 15' [4.6m] cord. Length: 48" [1.2m].
Description/ Item Specifications: 20A CabinetMATE Surge Protector – Eleven 20A outlets with t-slots. 6' [1.8m] or 15' [4.6m] cord. Length: 70" [1.8m].
Description/ Item Specifications: 20A CabinetMATE Surge Protector – Twelve 20A outlets with t-slots. 6' [1.8m] or 15' [4.6m] cord. Length: 77" [2m].
j
j
j
j
Questions? Call Technical Support today at 1-800-SENTREX. Wiremold / Legrand U.S. and International: 60 Woodlawn Street • West Hartford, CT 06110 1-800-621-0049 • FAX 860-232-2062 • Outside U.S. 860-233-6251 Canada: 570 Applewood Crescent • Vaughan, Ontario L4K 4B4 1-800-723-5175 • FAX 905-738-9721 © Copyright 2007 Wiremold /Legrand All Rights Reserved
ED638R6 – Updated February 2007 – For latest specs visit www.wiremold.com
Plugmold® Systems Steel, Aluminum, and Nonmetallic Plugmold Raceway and Multioutlet Assemblies he selection of steel, aluminum, and nonmetallic provides a versatile solution for many applications. Plugmold sections offer single or alternating circuits, standard or isolated ground receptacles, and Snapicoil® harnesses of prewired receptacles or cord ended units. Steel Plugmold comes in an ivory ScuffCoat™ or gray enamel finish. The ScuffCoat finish is scratch resistant and protects against nicks and chips while preventing color from fading. Aluminum Plugmold offers an attractive choice for hospital and commercial labs. The finish offers high-tech aesthetics and corrosion resistance. Nonmetallic Plugmold has a textured ivory finish with duplex receptacles. This series offers a field serviceable surge module that protects the entire Plugmold strip and makes on-site changes easy.
T
Plugmold Systems come in a variety of finishes and configurations.
Features & Benefits ■ Steel, aluminum, or nonmetallic material. Variety provides choice for the application. ■ Many finishes. Ivory ScuffCoat finish or gray surface for steel, aluminum satin anodized, and ivory nonmetallic textured finish. ■ Compact, low profile appearance. Requires minimal space. ■ Full range of fittings. Provides a complete wiring solution. ■ Single, alternating circuit, and isolated ground receptacles available. Meets virtually any job requirement. ■ Variety of lengths. Ideal for different spaces. ■ Choose receptacle spacing. Suits many applications. ■ Snapicoil harnesses with different lengths and receptacle spacing. Offers a solution for many electrical requirements. ■ Duplex receptacle. Aesthetically pleasing, functional 20A duplex for the 24S (2400) Series.
■ Single- and dual-gang boxes available. Wire devices into the raceway system. ■ Field replaceable surge module. Replaces the module, not a receptacle (NM2000 Series only). ■ Customization available. All products can be modified to accommodate virtually any application. ■ 2400 Backfeed. Fitting helps installation over an existing wall box. ■ Datacom connectivity options. Accepts industry standard and proprietary devices from a wide range of manufacturers to provide a seamless and aesthetically pleasing interface for voice, data, audio, and video applications at the point-of-use. ■ UL and cUL Listed. Safety and reliability in the applications. ■ cUL Listed 24S (2400) Series Plugmold. This 20A version is cUL Listed.
Plugmold Systems shown in typical applications.
ED1025R7 – Updated February 2005 – For latest specs visit www.wiremold.com
V/G 2000 Series Catalog No./Item
ITEM CAT NO. Base V/G 2000B-5* Cover V/G 2000C* Base & Cover V/G 2000BC*
2" [51mm]
V2003 2003
Description/Specifications
Catalog No./Item
Base and Cover Covers seam between sections of 5400C.
2009
5' 5' 5'
LENGTH [1.5m] [1.5m] [1.5m]
MATERIAL .040 Steel .025 Steel .025 Steel
Description/Specifications
1 7/32" [31mm]
Ground Clamp – For connection of equipment grounding conductor to provide additional ground to raceway. Use with V/G2000 Series.
How 2009 is used.
Supporting Clip – For temporary support, while positioning lengths of raceway base. Use with V/G 2000 Series. V2003 has ivory finish, 2003 has plated finish.
V2010B* G2010B*
Blank End Fitting – For closing the open end of raceway. Use with V/G 2000 Series. 3/4" [19.1mm]
V2051 W30 1 5/16" [33mm]
2000WC 2400WC AL2000WC AL2400WC NM2000WC
Wire Clip – Holds conductors in place in raceway.
2001
Coupling – For joining lengths of 2000 Series Raceway Base. at any point
4 1/2" [114mm]
Plugmold 2000 extended from wall outlet using 2051H.
2051H fastened to horizontally mounted wall box.
V2011* G2011*
2" [51mm]
V2006* G2006*
Flush Plate Adapter – For feeding 2000 from an existing wall outlet. Equipped with 1/2" [12.7mm] threaded stud, toothed lockwasher for grounding, and conduit bushing.
Pressure-Type Wire Connector – For common connection of two, three, or four No. 12 or No.14 solid copper conductors. Not for connection of equipment grounding conductor. 300V maximum; 20A 60° C maximum. Not for use with aluminum conductors.
90º Flat Elbow – For right angle turns on same surface. Cover stop permits neat butting of 2000C Cover. Two couplings furnished.
2 1/2" [64mm] Ea. Leg
desired. Base come together.
2017TC 1 1/2" [38mm]
Cover Clip – For covering joint where lengths of cover or base adjoin. Use with V/G 2000 Series.
3/4" [19.1mm]
Internal Corner Coupling – Furnished with one fiber bushing. 2017TC
1 1/2" [38mm]
2000B 2017TC
V2010A3* G2010A3*
2 7/64" [53mm] 1 29/32" [47mm] 2 11/16" [67mm]
Entrance End – Offers larger capacity than V2010A2. 1/2" trade size KOs on end, each side and bottom. 3/4" trade size KOs on bottom and rear. Includes ground screw. Use with V/G 2000 Series.
1 9/32" [58mm] 1 1/2" [38mm]
2 1/8" [54mm]
2017TC used as a corner coupling. 2017TC used as a corner coupling and a straight-through fitting.
2000B
V2018C* G2018C*
3 22/64" [94mm]
V2010A2* G2010A2*
2051H fastened to vertically mounted wall box.
External Elbow – To continue raceway runs around outside corner. Fills the gap when external corner is made by notching and bending the 2000 Base. Cover gap filler snapped into place in 2018C.
1 7/8" [48mm]
Entrance End – For connecting V2000 with 1/2" conduit and armored cable connectors. 1/2" trade size KOs on end, each side and bottom. Includes ground screw. Use with V/G 2000 Series.
V2015* G2015*
6" [152mm]
Tee – For branches at right angles. Couplings furnished. 1 1/2" [38mm]
4" [102mm]
3" [76mm]
* Use “V” prefix for Ivory finish and “G” prefix for Gray finish. 2
V/G 2000 Series Catalog No./Item V2048 G2048
4 5/8" [117mm]
2 7/8" [73mm]
1 3/4" [44mm]
V2048-2 4 3/4" [121mm]
4 3/4" [121mm]
1 3/4" [44mm]
V2089
Description/Specifications
Catalog No./Item
Description/Specifications
Single Gang Device Box – Cover has twistouts for 2000, V500, and V700 Raceway. Base has 1/2" trade KO and rectangular KO for extension to wall box. Base has #10 threaded hole for ground connection.
V2089E
End Reducing Connector – For connecting V2000 with V500 Raceway through end of V2000.
Two-Gang Device Box – Cover has G2048-2 Twistouts for 2000, V500, and V700 Raceway. Base has 1/2" trade KO and rectangular KO for extension to wall box. Base has #10 threaded hole for ground connection.
620
2000 Raceway Base and Cover Cutter – Portable cutter for 2000 Cover and Base. Tool steel construction for clean and easy square cuts every time. Total manual operation.
620BCK
Replacement Blade Kit – Replacement blades and die set for 620 Cutter.
3/4" [19.1mm]
Side Reducing Connector – For connecting V2000 with V500 Raceway through side of V2000. orange receptacles. Couplings furnished.
3 1/4" [83mm]
(continued)
rectangular KO for extension to wall box. Base has #10 threaded
6" [152mm]
* Use “V” prefix for Ivory finish and “G” prefix for Gray finish.
trade size V2400 Series Catalog No./Item
ITEM Base Cover Base & Cover
CAT NO. V2400B V2400C V2400BC
Description/Specifications
Catalog No./Item
Description/Specifications
Base and Cover Covers seam between sections of 5400C.
2409
Ground Clamp – No. 10 ground screw provided. Use with V2400 Series.
5' 5' 5'
LENGTH [1.5m] [1.5m] [1.5m]
MATERIAL .040 Steel .040 Steel .040 Steel
1/2" [12.7mm]
V2410A 2" [51mm]
2401
Coupling – For joining lengths of raceway. Use with V2400 Series.
2" [51mm] 1 5/8" [41mm]
Entrance End – For connecting V2400 with 1/2" trade size conduit and armored cable. Use with V2400 Series.
1 3/16" [46mm]
2400WC 2400WC AL2000WC AL2400WC NM2000WC 1"
V2410B
Wire Clip – Holds conductors in place in raceway.
Blank End – For closing open end of V2400 Series. 1 3/16" [30mm]
[25mm]
V2410C V2406
1 1/2" [38mm]
Cover Clip – For covering joint where lengths of cover or base adjoin. Use with V2400 Series (nonmetallic).
2 11/16" 1 7/8" [68mm] [48mm] 2 1/8" [54mm]
3
Entrance End Fitting – Has 1/2" and 3/4" trade size KOs on end and bottom. Additional 1/2" trade size KO on sides.
V2400 Series Catalog No./Item V2411 15/16" [23.8mm]
Description/Specifications
Catalog No./Item
Description/Specifications
90º Flat Elbow – For right angle turns on the same surface (nonmetallic cover).
V2489
Side Reducing Connector – For connecting V2400 with V500 Raceway.
V2444 V2444-2
Extra Deep Device Box – Base has rectangular knockout to enable extension from existing single-gang flush wall box and 1/2" and 1" concentric KOs. V2444 Cover has two twistouts for 500 and 700, and two twistouts for 2400. V2444-2 Cover has four 2400 Series twistouts.
2 1/16" [52mm] 3 7/8" [98mm]
V2417
Internal Elbow – For making internal 90° corners. All steel construction.
CAT NO. V2444 V2444-2
1 29/32" [49mm]
1 5/8" [41mm]
V2418
4 3/4" [121mm] 2 3/4" [70mm]
1 3/4" [45mm]
V2417M
4 3/4" [121mm]
Internal Elbow – For making internal corners (nonmetallic cover).
1 5/8" [41mm]
(continued)
External Elbow – For covering outside corners (nonmetallic cover).
V2451H 4 1/2" [114mm]
Back Feed Fitting – For feeding V2400 Raceway from an existing outlet box. Equipped with 1/2" trade size male bushing and locknut washer for grounding.
L 4 5/8" [117mm] 4 3/4" [121mm]
W 2 7/8" [73mm] 4 3/4" [121mm]
D 1 3/4" [44mm] 1 3/4" [44mm]
GANG # 1 2
624
2400 and 2400BD Raceway & Cover Cutter – Portable cutter for 2400B and 2400BD Raceway and Cover. Tool steel construction for clean and easy square cuts. Total manual operation.
624BCK
Replacement Blade Kit – Replacement blades and die set for 624 Cutter.
4 1/2" [114mm]
V2448 V2448-2
L
W
D
CAT NO. V2448 V2448-2
L 4 5/8" [117mm] 4 3/4" [121mm]
Device Box – Cover has one twistout for 2400 on each side and ends. Base has 1/2" trade KO and rectangular KO for extension to wall box. Base has #10 threaded hole for ground connection. W 2 7/8" [73mm] 4 3/4" [121mm]
D 1 3/4" [44mm] 1 3/4" [44mm]
GANG # 1 2
AL Series Catalog No./Item
Description/Specifications
Catalog No./Item
Description/Specifications
Base and Cover Covers sea
AL2003
Supporting Clip – Mount to surface with No. 8 flathead screws. Use with AL2000 Series.
between sections of 5400C. ITEM Base Cover Base Base Cover Base
CAT NO. AL2000B-5 AL2000C-5 AL2000B-10 AL2400B-5 AL2400C AL2400B-10
LENGTH 5' [1.5m] 5' [1.5m] 10' [3.m] 5' [1.5m] 5' [1.5m] 10' [3.m]
MATERIAL .060 Aluminum .060 Aluminum .060 Aluminum .060 Aluminum .060 Aluminum .060 Aluminum
1 7/16" [37mm]
W30
4
Pressure-Type Wire Connector – For common connection of two, three, or four No. 12 or No.14 solid copper conductors. Not for connection of equipment grounding conductor. 300V maximum; 20A 60° C maximum. Not for use with aluminum conductors.
AL Series
(Continued)
Catalog No./Item
Description/Specification
Catalog No./Item
AL2000WC AL2400WC
Wire Clip – Holds conductors in place in raceway (nonmetallic).
AL2011 AL2411
AL2001 AL2401
AL2006 AL2406
CAT NO. AL2011 AL2411
1 1/2" [38mm]
AL2009
AL2416 6" [152mm]
Ground Clamp – Use with AL2400 Series.For connection
1 3/4" [44mm]
AL2017 AL2417 A A
1" [25mm]
AL2018 AL2418
End Fitting – With 1/2" plastic KO. Use with AL2400 Series.
1 3/8" [35mm]
A
AL2038
Blank End – Use with AL2000 Series.
4 13/16" [122mm]
1 3/8" [35mm]
1" [25mm]
AL2410B
2" [51mm]
Blank End – Use with AL2400 Series.
AL2040A
3" 4"
A [76mm] [102mm]
CAT NO. AL2018 AL2418
A 1 7/8" [48mm] 3" [76mm]
B 3" [76mm] 5" [127mm]
Round Fixture Box (Solid Base) – Designed for use in hanging fixtures. Cover takes any device with mounting screw centers of 2 3/4", 3 1/2", and 4 1/16" [70mm, 89mm, and [103mm]. Base has concentric 1/2" and 3/4" KO. In-line Single Pole Switch – Single pole 120V switch. Two couplings furnished.
AL2043
Box Adapter – For feeding raceway from an existing wall outlet. 4 1/2" [114mm]
CAT NO. AL2017 AL2417
6" [152mm]
1 1/4" [32mm]
AL2051 AL2451
Cross – For cross connection of two runs of AL2400 Raceway. Four couplings furnished.
External Elbow – For making 90º external corners. Two couplings furnished.
B B
1 1/4" [32mm]
AL2010B
C 1 9/16" [40mm] 2" [51mm]
Internal Elbow – For bending around internal corners. Two couplings furnished.
End Fitting – With 1/2" hub adapter. Use with AL2000 Series.
2" [51mm]
B 4" [102mm] 6" [152mm]
2" [51mm]
#8 Ground Stud W/Cup Washer
AL2410B2
A 1 7/16" [37mm] 4" [102mm]
6" [152mm]
1 3/8" [35mm]
C 1 9/16" [40mm] 2" [51mm]
C
#8 Ground Stud W/Cup Washer
AL2010A
B 3" [76mm] 4" [102mm]
Tee – For branch connection of two runs of AL2000 Raceway. Three couplings furnished.
B
CAT NO. AL2015 AL2415
Ground Clamp – Use with AL2000 Series.
3" [76mm]
A 3" [76mm] 4" [102mm]
A
AL2015 AL2415
Cover Clip – For covering joint where lengths of cover or base adjoin. Use with AL2000 and AL2400 Series.
1" [25mm]
90º Flat Elbow – For right angle turn on same surface. Comes with two couplings.
C
CAT NO. L W AL2001 1 5/8"[41mm] 1 1/2" [38mm] AL2401 3" [76mm] 1 3/4" [44mm]
L
AL2409
B
A
Coupling – For joining lengths of raceway. Use with AL2000 and AL2400 Series.
W
Description/Specifications
In-line Receptacle – Two 15A, 120V U-ground factory wired receptacles. Couplings furnished. 6" [152mm]
4 1/2" [114mm]
5
AL Series
(Continued)
Catalog No./Item
Description/Specifications
Catalog No./Item
Description/Specifications
AL2043IG
In-line Isolated Ground Receptacle – Two 15A, 120V factory wired, isolated ground, orange receptacles. Couplings furnished.
AL2047
Shallow Switch and Receptacle Box – Designed for standard shallow switches and receptacles. Base has open back plate for mounting to existing wall box and solid back plate insert with 1/2" and 3/4" KO to close opening.
6" [152mm]
D
L
W
AL2044 AL2044-2 D
L
W
CAT NO. AL2044 AL2044-2
Deep Device Box – For receptacles and deep devices such as those of signal and alarm systems. Base has open back plate for mounting to existing wall box and solid back plate insert with 1/2" and 3/4" KO to close opening.
L W D 4 5/8" [117mm] 3 1/16" [73mm] 2 1/4" [57mm] 4 5/8" [117mm] 4 27/32" [121mm] 2 1/2" [64mm]
CAT NO. AL2047 AL2047-2
L W 4 5/8" [117mm] 3 1/16" [73mm] 4 5/8" [117mm] 4 27/32"[121mm]
AL2446P-D
D 1 3/8" [35mm] 1 3/8" [35mm]
GANG # 1 2
Duplex Receptacle Cover Plate – For in-line mounting of commercially available duplex receptacles.
GANG # 1 2
6" [152mm]
NM2000 Series Catalog No./Item
ITEM Base Cover Base & Cover
NM2003
CAT NO. NM2000B NM2000C NM2000BC
Description/Specifications
Catalog No./Item
Description/Specifications
Base and Cover
NM2017
Internal Elbow – For right turns at inside corners.
8' 8' 5'
LENGTH [2.4m] [2.4m] [1.52m]
2" [51mm]
MATERIAL PVC-Ivory PVC-Ivory PVC-Ivory
2" [51mm]
1 5/8" [41mm]
1 7/8" [73mm]
Supporting Clip – Mount to surface with No. 8 flathead screw. Use with NM2000 Series.
2" [51mm]
2" [51mm]
NM2018 1 3/8" [35mm] 1 3/4" [44mm]
W30
Pressure-Type Wire Connector – For common connection of two, three, or four No. 12 or No.14 solid copper conductors. Not for connection of equipment grounding conductor. 300V maximum; 20A 60° C maximum. Not for use with aluminum conductors.
NM2006
1" [25mm]
1" [25mm]
NM2010A
Entrance End – Has 1/2" trade size KO on end and bottom. Use with NM2000 Series.
1 9/16" [40mm]
1 3/4" [44mm]
Cover Clip – For covering joint where lengths of cover or base adjoin. Use with NM2000 Series.
1 3/4" [44mm]
3 13/16" [97mm]
3 3/16" [81mm]
NM2010B
90º Flat Elbow – For right angle turns on same surface.
1 7/8" [48mm]
1 1/2" [38mm] 1 3/4" [44mm]
1 1/2" [38mm]
NM2011
External Elbow – Used for making 90º turns at outside corners.
1 1/16" [27mm]
2 11/16 [68mm]
1 15/16" [49mm]
6
3 3/8" [86mm]
Blank End Fitting – Use with NM2000 Series.
NM2000 Series Catalog No./Item NM2051H NM2051V
2 3/4" [70mm]
2 3/4" [70mm]
(Continued)
Description/Specifications
Catalog No./Item
Wall Box Adapter – For feeding raceway from an existing wall outlet; horizontal or vertical applications. Provides complete access to wall box for connections.
NM2015
Description/Specifications Tee – For branches at right angles. raceway. Four couplings 1 5/8" 1 5/16" furnished. [41mm] 3 11/16" [33mm]
4 1/2" [114mm]
1" [25mm]
[94mm]
1 7/8" [48mm]
4 1/2" [114mm] 4 1/2" [114mm]
NM2044 NM2011
Extra Deep Device Box – For mounting power/communication device when additional depth is required. Has combination twistouts for 2700, 2800, 2900, and NM2000.
W
90º Flat Elbow – For right angle turns on same surface.
L 3 3/16" [81mm]
1 7/8" [48mm]
2 11/16 [68mm]
NM2017
CAT NO. NM2044 NM2044-2
Internal Elbow – For right turns at inside corners.
2" [51mm]
2" [51mm]
D
1 5/8" [41mm]
L 4 3/4" [121mm] 4 3/4" [121mm] W
NM2048
1 7/8" [73mm]
2" [51mm]
NM2018 1 3/8" [35mm]
1" [25mm]
1" [25mm]
L 4 3/4" [121mm] 4 3/4" [121mm]
NM2027-15 NM2027-20
3 3/16" [81mm] 1/2" [12.7mm]
GANG # 1 2
D CAT NO. NM2048 NM2048-2
NM2027S
D 1 3/4" [44mm] 1 3/4" [44mm]
Sure Snap® Device Box – Cover snaps onto base, no screws required. Cover has twistouts on all sides. Rectangular KO in base for extension to wall box.
L
External Elbow – Used for making 90º turns at outside corners.
W 3" [76mm] 4 7/8" [124mm]
Surge Suppression Module – Field installed replacement module for SGB Series surge strips. Protects all receptacles on the strip. Contains indicator light for proper operation of the suppression module. Suppression three legs.
W 3" [76mm] 4 7/8" [124mm]
D 1 3/4" [44mm] 1 3/4" [44mm]
GANG # 1 2
Replacement Receptacles – 15A and 20A replacement devices. 6" [152mm] wire leads each side. 4" [102mm]
1 1/8" [29mm] 3 3/16" [81mm]
Specifications for Surge Module Standards
UL recognized under the component program of UL Standard 1449, as defined by ANSI/NFPA 70-1990.
Service Voltage
120Vrms nominal operating voltage.
Maximum Continuous Operating Voltage
150Vrms.
Suppression Voltage (Three Line Protection)
Complete surge protective device as assessed by UL:
Actual let through voltage at 6kA 1.2/50µs, 500A, 8/20µs
340 Volts Peak L-N.
Maximum Single Withstand Surge Current
No less than 39kA individually between L-N, L-G, and N-G, based on the sum of the device components.
7
Suppression Mode
UL1449 Suppression Voltage
Line – Neutral
500V
Line – Ground
500V
Neutral – Ground
500V
Wiring Configuration With Snapicoil GB Series: 3-wire, #12 THHN (1 hot, 1 neutral and 1 ground), 1 circuit; has insulated grounding conductor.
GBA Series: 4-wire, #12 THHN (2 hot, 1 neutral and 1 ground), 2 circuit; outlets wired alternately; has insulated grounding conductor.
IG Series: 3-wire, #12 THHN (1 hot, 1 neutral and 1 ground), 1 circuit; has insulated-isolated grounding conductor. Orange receptacles.
GB Series: 3-wire, #12 THHN (1 hot, 1 neutral and 1 ground), 1 circuit; has insulated grounding conductor.
GBA Series: 4-wire, #12 THHN (2 hot, 1 neutral and 1 ground), 2 circuit; outlets wired alternately; has insulated grounding conductor.
NOTE: SNAPICOIL REELS on custom order. Snapicoil is available on reels if lengths greater than 50’ are needed, or if multiple lengths are required for production-type jobs. The maximum length per reel is 240’ for Snapicoil with outlets 12” and 18” on centers; 500’ with outlets 30” on center. Packaging includes the necessary number of lengths of base, holecut cover, wire clips, and couplings for complete installation. Price and delivery information should be obtained prior to specifying or ordering. To specify or order, add R to the Snapicoil number. Ex: V20GB06R. Other outlet spacings available on custom order. Receptacles are made from high impact thermoplastic. V2000 Plugmold is supplied with two (2) V2010B Blank End Fittings and (1) 2001 Base Coupling. NM2000 Plugmold strips are supplied with two (2) NM2010B Blank End Fittings.
Plugmold Multi Outlet Strip CATALOG NO.
LENGTH
WIRING CONFIG
OUTLETS CENTER DISTANCE 6" 6"
HOUSING
20GB306* AL20GB306
3' 3'
[915mm] [915mm]
GB GB
AL20IG306
3'
[915mm]
IG
6"
24S3612GBX99IV
3'
[915mm]
GB
12"
24S3612GBA99IV
3'
[915mm]
GBA
12"
[305mm]
NM24GB412
4'
[1.2m]
GB
12"
[305mm]
4 Duplex
20A
PVC – Ivory
NM24GBA412
4'
[1.2m]
GBA
12"
[305mm]
4 Duplex
20A
PVC – Ivory
NM20GB412
4'
[1.2m]
GB
12"
[305mm]
4 Duplex
15A
PVC – Ivory
NM20GBA412
4'
[1.2m]
GBA
12"
[305mm]
4 Duplex
15A
PVC – Ivory
NM20IG412
4'
[1.2m]
IG
12"
[305mm]
4 Duplex
15A
PVC – Ivory
NM20SGB412
4'
[1.2m]
SGB-Surge
12"
[305mm]
3 Duplex
15A
PVC – Ivory
20GB506*
5'
[1.5m]
GB
6"
[152mm]
10 Single
15A
Steel
20GB512*
5'
[1.5m]
GB
12"
[305mm]
5 Single
15A
Steel
20GBA512*
5'
[1.5m]
GBA
12"
[305mm]
5 Single
15A
Steel
20IG512*
5'
[1.5m]
IG
12"
[305mm]
5 Single
15A
Steel
24S6012GBX99IV
5'
[1.5m]
GB
12"
[305mm]
5 Duplex
20A
Steel – Ivory
24S6012IGX99IV
5'
[1.5m]
IG
12"
[305mm]
5 Duplex
20A
Steel – Ivory
24S6012GBA99IV
5'
[1.5m]
GBA
12"
[305mm]
5 Duplex
20A
Steel – Ivory
AL20GB506
5'
[1.5m]
GB
6"
[152mm]
10 Single
15A
Aluminum
AL20GB512
5'
[1.5m]
GB
12"
[305mm]
5 Single
15A
Aluminum
AL20IG506
5'
[1.5m]
IG
6"
[152mm]
10 Single
15A
Aluminum
NM24GB512
5'
[1.5m]
GB
12"
[305mm]
5 Duplex
20A
PVC – Ivory
NM24GB530
5'
[1.5m]
GB
30"
[760mm]
2 Duplex
20A
PVC – Ivory
NM24GBA512
5'
[1.5m]
GBA
12"
[305mm]
5 Duplex
20A
PVC – Ivory
NM20GB512
5'
[1.5m]
GB
12"
[305mm]
5 Duplex
15A
PVC – Ivory
NM20GB515
5'
[1.5m]
GB
15"
[381mm]
4 Duplex
15A
PVC – Ivory
NM20GB530
5'
[1.5m]
GB
30"
[760mm]
2 Duplex
15A
PVC – Ivory
NM20GBA512
5'
[1.5m]
GBA
12"
[305mm]
5 Duplex
15A
PVC – Ivory
NM20IG512
5'
[1.5m]
IG
12"
[305mm]
5 Duplex
15A
PVC – Ivory
NM20SGB512
5'
[1.5m]
SGB-Surge
12"
[305mm]
4 Duplex
15A
PVC – Ivory
* Use “V” prefix for Ivory finish and “G” prefix for Gray finish.
8
[152mm] [152mm]
QUANTITY 6 Single 6 Single
15A 15A
Steel Aluminum
[152mm]
6 Single
15A
Aluminum
[305mm]
3 Duplex
20A
Steel – Ivory
3 Duplex
20A
Steel – Ivory
Plugmold Multi Outlet Strip CATALOG NO.
LENGTH
WIRING CONFIG
(Continued)
OUTLETS CENTER DISTANCE QUANTITY
HOUSING
20GB606*
6'
[1.8m]
GB
6"
[152mm]
12 Single
15A
Steel
20GB609*
6'
[1.8m]
GB
9"
[229mm]
8 Single
15A
Steel
20GB612*
6'
[1.8m]
GB
12"
[305mm]
6 Single
15A
Steel
20GB618*
6'
[1.8m]
GB
18"
[457mm]
4 Single
15A
Steel
20GBA609*
6'
[1.8m]
GBA
9"
[229mm]
8 Single
15A
Steel
20GBA612*
6'
[1.8m]
GBA
12"
[305mm]
6 Single
15A
Steel
20GBA618*
6'
[1.8m]
GB
18"
[457mm]
4 Single
15A
Steel
20IG606*
6'
[1.8m]
IG
6"
[152mm]
12 Single
15A
Steel
24S7212GBX99IV
6'
[1.8m]
GB
12"
[305mm]
6 Duplex
20A
Steel – Ivory
24S7224GBA99IV
6'
[1.8m]
GBA
24"
[608mm]
3 Duplex
20A
Steel – Ivory
24S7218GBX99IV
6'
[1.8m]
GB
18"
[457mm]
4 Duplex
20A
Steel – Ivory
24S7224GBX99IV
6'
[1.8m]
GB
24"
[608mm]
5 Duplex
20A
Steel – Ivory
24S7218IGX99IV
6'
[1.8m]
IG
18"
[457mm]
4 Duplex
20A
Steel – Ivory
24S7212IGX99IV
6'
[1.8m]
IG
12"
[305mm]
6 Duplex
20A
Steel – Ivory
24S7224IGX99IV
6'
[1.8m]
IG
24"
[608mm]
3 Duplex
20A
Steel – Ivory
24S7212GBA99IV
6'
[1.8m]
GBA
12"
[305mm]
6 Duplex
20A
Steel – Ivory
24S7218GBA99IV
6'
[1.8m]
GBA
18"
[457mm]
4 Duplex
20A
Steel – Ivory
AL20GB606
6'
[1.8m]
GB
6"
[152mm]
12 Single
15A
Aluminum
AL20GB612
6'
[1.8m]
GB
12"
[305mm]
6 Single
15A
Aluminum
AL20GB618
6'
[1.8m]
GB
18"
[457mm]
4 Single
15A
Aluminum
AL20GBA606
6'
[1.8m]
GBA
6"
[152mm]
12 Single
15A
Aluminum
AL20GBA612
6'
[1.8m]
GBA
12"
[305mm]
6 Single
15A
Aluminum
AL20GBA618
6'
[1.8m]
GBA
18"
[457mm]
4 Single
15A
Aluminum
AL20IG606
6'
[1.8m]
IG
6"
[152mm]
12 Single
15A
Aluminum
AL20IG618
6'
[1.8m]
IG
18"
[457mm]
4 Single
15A
Aluminum
NM24GB612
6'
[1.8m]
GB
12"
[305mm]
6 Duplex
20A
PVC-Ivory
NM24GB618
6'
[1.8m]
GB
18"
[457mm]
4 Duplex
20A
PVC-Ivory
NM24GBA612
6'
[1.8m]
GBA
12"
[305mm]
6 Duplex
20A
PVC-Ivory
NM20GB609
6'
[1.8m]
GB
9"
[229mm]
8 Duplex
15A
PVC-Ivory
NM20GB612
6'
[1.8m]
GB
12"
[305mm]
6 Duplex
15A
PVC-Ivory
NM20GB618
6'
[1.8m]
GB
18"
[457mm]
4 Duplex
15A
PVC-Ivory
NM20GBA609
6'
[1.8m]
GBA
9"
[229mm]
8 Duplex
15A
PVC-Ivory
NM20GBA612
6'
[1.8m]
GBA
12"
[305mm]
6 Duplex
15A
PVC-Ivory
NM20IG612
6'
[1.8m]
IG
12"
[305mm]
6 Duplex
15A
PVC-Ivory
NM20SGB612
6'
[1.8m]
SGB-Surge
12"
[305mm]
5 Duplex
15A
PVC-Ivory
NM20SGB618
6'
[1.8m]
SGB-Surge
18"
[457mm]
3 Duplex
15A
PVC-Ivory
* Use “V” prefix for Ivory finish and “G” prefix for Gray finish. Outlets match raceway finish.
9
Plugmold with Snapicoil Harness CATALOG NO.
LENGTH
WIRING CONFIG
OUTLETS (15A 120V NEMA 5-15SR) HOLE CUT COVER CENTER DISTANCE QUANTITY QUANTITY LENGTH
HOUSING
20GB12*
48'
GB
12"
[305mm]
48 Single
8
6'
[1.8m]
Steel
20GB18*
48'
GB
18"
[457mm]
V20GB30
50'
GB
30"
[760mm]
32 Single
8
6'
[1.8m]
Steel
20 Single
10
5'
[1.5m]
Steel-Ivory
NM20GB12
48'
GB
12"
[152mm]
24 Duplex
8
6'
[1.8m]
PVC-Ivory
20GBA12*
48'
GBA
12"
[305mm]
48 Single
8
6'
[1.8m]
Steel
NM20GBA12
48'
GBA
12"
[305mm]
24 Duplex
8
6'
[1.8m]
PVC-Ivory
* Use “V” prefix for Ivory finish and “G” prefix for Gray finish.
Cord-Ended Plugmold Series CAT NO. NM20-C3 20-C2* NM20-C4 NM20-C5 NM20-C6
UNIT LENGTH 3' [.92m] 3' 4" [1m] 4' [1.2m] 5' [1.5m] 6' [1.8m]
OUTLETS QUANTITY 3 Duplex 6 Single 4 Duplex 5 Duplex 6 Duplex
CORD SET LENGTH 6' [1.8m] 6' [1.8m] 6' [1.8m] 6' [1.8m] 6' [1.8m]
TYPE 14/3 SJT 12/3 SJT 14/3 SJT 14/3 SJT 14/3 SJT
CIRCUIT BREAKER Yes Yes Yes Yes Yes
SWITCH Yes No Yes Yes Yes
HOUSING PVC-Ivory Steel PVC-Ivory PVC-Ivory PVC-Ivory
* Use “V” prefix for Ivory finish and “G” prefix for Gray finish.
Wire Fill Capacities for Power CABLE TYPE
WIRE SIZE THHN/THWN
O.D. Inches
[mm]
V2000
NUMBER OF CONDUCTORS (40% FILL) V2400 NM2000 AL2000 AL2400
POWER WIRING WITHOUT DEVICES
8 10 12 14
AWG AWG AWG AWG
0.216 0.166 0.130 0.111
[5.5] [4.2] [3.3] [2.8]
– – 7* 7*
– 26 41 57
POWER WIRING WITH DEVICES (PLUGMOLD)
8 10 12 14
AWG AWG AWG AWG
0.218 0.153 0.122 0.105
[5.5] [3.9] [3.1] [2.7]
– – 5* 5*
2 6 10 –
*Wire capacity limited to maximum of seven conductors due to .025" [.6mm] material thickness of cover. **Including one hot, neutral, and ground wire from the receptacle.
10
– 15 31 45 – – 8** 8**
12 24 38 51
18 37 58 78
– 3 6 8
4 8 12 16
Cross Section Catalog No./Item
Description/Specifications
Catalog No./Item
Description/Specifications
2000
Base and Cover – Base – 2000B .040" [1.0mm] steel. Cover – 2000C .025" [.6mm] steel.
AL2400
Base and Cover – 6063-T5 extruded aluminum, satin anodized finish, .060" [1.5mm] nominal thickness.
1 9/32" [33mm]
3/4" [19.1mm]
Cross-Sectional Area: 1.7in2 [1097mm2]
Cross-Sectional Area: 0.80in2 [516mm2] 1 9/32" [33mm]
2" [51mm]
V2400
Base and Cover – Base – V2400B .040" [1.0mm] steel. Cover – V2400C .040" [1.0mm] steel.
NM2000
7/8" [22.2mm]
Base and Cover – Extruded PVC, ivory textured finish.
Cross-Sectional Area: 1.14in2 [735mm2]
1" [25mm] Cross-Sectional Area: 1.39in2 [897mm2] 1 3/4" [44mm]
1 29/32" [48mm]
AL2000
Base and Cover – 6063-T5 extruded aluminum, satin anodized finish, .060" [1.5mm] nominal thickness.
1 1/8" [29mm]
Cross-Sectional Area: 1in2 [645mm2]
1 7/16" [37mm]
11
Datacom Connectivity Options Now you have a wide range of options for providing datacom connectivity into Wiremold® Cable Management Systems. They are:
• Ortronics® TracJack® and Series II Modular Connectivity Solutions • Pass & Seymour Activate™ Modular Inserts • Open System Communication Modules Use these icons to determine connectivity options for each Wiremold System component:
ORT P&S OPEN
ORT
ORT
ORT
P&S
P&S
P&S
OPEN
OPEN
OPEN
Ortronics® Connectivity TracJack® Individual Jack System • • • • • •
Front-loading, snap-in design supports future moves adds and changes Inserts for voice, data, audio, and video Available Category 3, 5e, 6, USOC 6-position, and other media Flat or angled 45° exit configurations Choice of 13 colors and color matched to Wiremold Systems Universal T568A/B wiring format
Series II Front-Loading, Module System • • • • • •
Module design features easy snap-in front-loading design Linear 110 punch down format for easy termination Inserts for voice, data, audio, and video Available Category 3, 5e, 6, USOC 6-position, and other media Available in flat or angled 45° exit configurations Color matched to Wiremold Systems
For detailed product selection refer to the Ortronics Catalog or visit www.ortronics.com.
ORT P&S OPEN
Pass & Seymour Legrand Network Wiring Activate™ Series Front-Loading Inserts • • • • •
Modular inserts for voice, data, audio and video applications Front-load, snap-in design Color and texture matched to Wiremold Systems Available Category 3, 5e, 6, as well as 6-position USOC Universal T568A/B wiring format
For detailed product selection refer to the Pass & Seymour Network Wiring Catalog or visit www.passandseymour.com.
ORT
Open Connectivity Solutions
P&S
Wiremold Open System Communications Modules
OPEN
• Accommodate a wide range of manufacturers’ communications outlets including keystone jacks, as well as proprietary solutions from Avaya (Lucent) and NORDX • Modules insert into a wide range of Wiremold Systems • Pre-punched faceplates accept common communication devices NOTE: For more information on integrating connectivity into Wiremold Cable Management Systems contact the Wiremold Applications Engineering Team or your local Wiremold Sales Representative.
Wiremold / Legrand U.S. and International: 60 Woodlawn Street • West Hartford, CT 06110 1-800-621-0049 • FAX 860-232-2062 • Outside U.S. 860-233-6251 Canada: 570 Applewood Crescent • Vaughan, Ontario L4K 4B4 1-800-723-5175 • FAX 905-738-9721 © Copyright 2005 The Wiremold Company All Rights Reserved
ED1025R7 – Updated February 2005 – For latest specs visit www.wiremold.com
UNIDUCT ® Latching Raceway
Uniduct One-Piece Latching Raceway he Uniduct Nonmetallic Latching Raceway System is a one-piece single channel design, ideally suited to route and protect fiber optic, UTP, and and other low-voltage (50V or less) cables in an easy to install and aesthetically pleasing application. The 2800 and 2900 Fiber Optic (FO) fittings maintain a 1 1/4" [32mm] bend radius and are the perfect solution for even the most demanding cabling applications.
T
The Uniduct design features a co-extruded flexible PVC hinge that prevents cracking and splitting even after numerous openings and closings.
Features & Benefits ■ Made of durable impact-resistant PVC. Easy to cut and trim.
■ One-piece design. Easy to handle and install. ■ Easy open and snap-close latch. Installations, moves, and changes are quick and easy. ■ Durable, flexible hinge construction. Allows for repeated openings and closings while maintaining product integrity and aesthetics. ■ Adhesive backing. Makes installation quick and easy. ■ Fiber compliant fittings. Maintain 1 1/4" [32mm] bend radius for UTP and fiber optic cable.. ■ Available in three low profiles, in both 6' & 8' [1.8m & 2.4m] lengths. Allows flexibility for cabling requirements. Six- and eight-foot [1.83m and 2.4m] lengths minimize cutting, cover clips, and scraps.
2700
2800
■ Full selection of fittings. Surface mount boxes, and multiport workstation outlets makes installations quick and easy. ■ Available in three standard colors. Standard colors are ivory, white, and fog white. Consult factory for custom colors. Paintable using latex paint. ■ Datacom connectivity options. Accepts industry standard and proprietary devices from a wide range of manufacturers to provide a seamless and aesthetically pleasing interface for voice, data, audio, and video applications at the point of use.
2900
ED264R6 – Updated April 2006 – For latest specs visit www.wiremold.com
Uniduct 2700, 2800, 2900 Series Latching Raceway System Layout
F
I
B
G
E
C
A
J
H
C
D
A B C D E
— 2710B, 2810B, 2910B — 2706, 2806, 2906 — 2715, 2815, 2915 — CM-MMB-293 — 2718, 2818, 2918
Blank End Fitting Cover Clip Tee Fitting Multimedia Box External Elbow
F G H I J
— 2786, 2886, 2986 — 2717, 2817, 2917 — 2711, 2811, 2911 — NM2048 — CM2, Series II, Tracjack
Drop Ceiling Connector Internal Elbow Flat Elbow Device Box Communication Device
NOTE: Illustration is for showing product applications only.
Uniduct 2700, 2800, 2900 Series Latching Raceway Wire Fill Capacity Chart CABLE TYPE UNSHIELDED TWISTED PAIR
COAXIAL FIBER
CATEGORY/ DESIGNATION 4-pair, 24 AWG Cat 3 4-pair, 24 AWG Cat 5e 4-pair, 24 AWG Cat 6 4-pair, 24 AWG Cat 6a* 25-pair, 24 AWG RG6/U ZipCord Round 4 Strand Fiber Round 6 Strand Fiber
Inches
O.D. [mm]
2700 RACEWAY 40% FILL
0.190 0.210 0.250 0.354 0.410 0.270 0.118 x 0.236 0.187 0.256
[4.8] [5.3] [6.3] [8.9] [10.4] [6.9] [3 x 6] [4.8] [6.5]
2 1 1 0 0 1 2 2 1
2800 RACEWAY 2900 RACEWAY 40% FILL 40% FILL 4 3 2 1 1 2 4 4 2
12 10 7 3 2 6 12 12 6
NOTE: Wire capacity is reduced to allow for proper conductor bend radius and maximum permissible heat rise. * Category 6 augmented (6a) cable for 10 gigabit ethernet – max allowed cable diameter per addenda No. 11 ANSI TIA/EIA 568-B.2.
2
Fittings for Uniduct Latching Raceway Catalog No./Item
Description/Specifications
Catalog No./Item
2700/2700L8 2800/2800L8 2900/2900L8
Latching Raceway – Onepiece latching raceway with co-extruded design, smooth plastic finish. Available in 6' [1.8m] and 8' [2.4m] lengths.
2810B
Description/Specifications 1 3/8" [35mm]
Blank End Fitting – For closing open end of 2800 Series Raceway.
A
Cat. No. B
2706
A
2700
3/8" [9.5mm]
2800
1/2" [12.7mm]
2900
3/4" [19.1mm] 1 1/2" [38mm]
1" [25mm]
2811
B
90° Flat Elbow – For right angle turns on same surface.
3/4" [19.1mm] 1"
[25mm]
2" [51mm] Each Leg 3" [76mm]
2811FO
Cover Clip – For covering joint where two pieces of 2700 Series Raceway Cover come together.
2 1/4" [57mm] 1" [25mm]
2710B
Blank End Fitting – For closing open end of 2700 Series Raceway.
2815 7/8" [22mm]
1 1/4" [32mm] Bend Radius Flat Elbow – For right angle turns on same surface. Maintains 1 1/4" [32mm] bend radius when installing UTP and fiber optic cable.
Tee – For branching of raceway running at right angles.
2 7/8" [73mm]
2711
90° Flat Elbow – For right angle turns on same surface.
2815FO 1 15/16" [49mm]
5" [127mm]
1 1/2" [38mm] Each Leg
2715 11/16" [17mm]
1 1/4" [32mm]
Tee – For branching of raceway running at right angles.
3 1/2" [89mm]
2 3/16" [56mm]
2717
2817
1 1/4" [32mm] Each Leg
2 1/4" [57mm] Each Leg
External Elbow – For right angle turns around external corners.
3 1/4" [83mm]
2 1/2" [64mm]
1" [25mm] Each Leg
2818 2786
1 7/16" [37mm]
1 1/4" [32mm] Bend Radius Internal Elbow – For right angle turns around internal corners. Maintains 1 1/4" [32mm] bend radius when installing UTP and fiber optic cable. External Elbow – For right angle turns around external corners.
Drop Ceiling Connector – For dropping cables from ceiling into the raceway. 1 1/8" [29mm] Each Leg
2 1/8" [54mm]
2818FO 2806
Internal Elbow – For right angle turns around internal corners.
Internal Elbow – For right angle turns around internal corners.
2817FO 2718
1 1/4" [32mm] Bend Radius Tee – For branching of raceway at right angles. Maintains 1 1/4" [32mm] bend radius when installing UTP and fiber optic cable.
1 1/2" [35mm]
Cover Clip – For covering joint where two pieces of 2800 Series Raceway Cover come together.
3" [76mm]
3 3/4" [95mm]
NOTE: No suffix denotes Ivory finish. Add "WH" suffix for White finish and "FW" suffix for Fog White finish.
3
1 1/4" [32mm] Bend Radius External Elbow – For right angle turns around external corners. Maintains 1 1/4" [32mm] bend radius when installing UTP and fiber optic cable.
Fittings for Uniduct Latching Raceway Catalog No./Item 1 9/16" [40mm]
2886 2 3/8" [60mm]
Description/Specifications
Catalog No./Item
Drop Ceiling Connector – For dropping cables from ceiling into the raceway.
2917
Description/Specifications
2 1/4" [57mm] Each Leg
2917FO 2889
3 1/4" [83mm]
Reducing Connector (2800 – 2700) – For transitioning from 2800 Series Raceway to 2700 Series Raceway. 3/4" [19.1mm]
2906
Internal Elbow – For right angle turns around internal corners.
1 1/4" [32mm] Bend Radius Internal Elbow – For right angle turns around internal corners. Maintains 1 1/4" [32mm] bend radius when installing UTP and fiber optic cable.
2 1/2" [64mm]
Cover Clip – For covering joint where two pieces of 2900 Series Raceway Cover come together.
2" [51mm]
2918
External Elbow – For right angle turns around external corners.
1 7/8" [48mm] Each Leg
2910B
Blank End Fitting – For closing open end of 2900 Series Raceway.
1 3/4" [44mm]
2918FO 3" [76mm] 3 3/4" [95mm]
2911
90° Flat Elbow – For right angle turns on same surface.
2 3/4" [70mm] Each Leg
2986
2911FO 3 1/2" [89mm]
1 1/4" [32mm] Bend Radius Flat Elbow – Right angle turns on same surface. Maintains 1 1/4" [32mm] bend radius when installing UTP and fiber optic cable.
2" [51mm]
1 1/4" [32mm] Bend Radius External Elbow – For right angle turns around external corners. Maintains 1 1/4" [32mm] bend radius when installing UTP and fiber optic cable.
Drop Ceiling Connector – For dropping cables from ceiling into the raceway.
2 7/8" [73mm]
2 1/4" [57mm]
2915
2989
Tee – For branching of raceway running at right angles.
Reducing Connector (2900 – 2800) – For transitioning from 2900 Series Raceway to 2800 Series Raceway.
1 1/8" [29mm] 3 7/8" [98mm]
2915FO 1 15/16" [49mm]
5 1/2" [140mm]
15/16" [24mm]
1 1/4" [32mm] Bend Radius Tee – For branching of raceway at right angles. Maintains 1 1/4" [32mm] bend radius when installing UTP and fiber optic cable.
2989A
1 1/4" [32mm] 4" [102mm]
15/16" [24mm]
NOTE: No suffix denotes Ivory finish. Add "WH" suffix for White finish and "FW" suffix for Fog White finish.
4
Reducing Connector (2900-2700) – For transitioning from 2900 Series Raceway to 2700 Series Raceway.
Uniduct boxes with Pass & Seymour Activate Inserts. Activate Inserts can be mounted flush or angled, on either onegang or two-gang boxes depending on the application.
Fiber Compliant Fittings for 2800 and 2900 Series Raceways. Maintain 1 1/4" [32mm] bend radius when installing UTP and fiber optic cable.
For ease of installing cables, the base has cable retention fingers that hold the cables in place until the cover is installed.
Boxes for use with 2700/2800/2900 Series Raceway Catalog No./Item
Description/Specifications
Catalog No./Item
Description/Specifications
CM-MMB-291
One Insert Multimedia ORT Box – Accepts one 2A size Wiremold Open P&S System communication module or Pass & Seymour OPEN Activate series insert. Compatible with 2700 and 2800 Series Raceways.
NM2044*
Extra Deep Device Box – ORT For mounting voice/data devices when additional P&S depth is required. Has combination twistouts for OPEN 2700, 2800, 2900, and NM200 Series Raceways.
1 1/2" [38mm]
3 1/4" [83mm]
1 1/2" [38mm]
5 3/16" [132mm]
4 3/4" [121mm]
3" [76mm]
3 1/4" [83mm]
CM-MMB-292
5 3/16" [132mm]
2 3/4" [70mm]
NM2044-2* 2 3/4" [70mm]
Two Insert FiberReady® ORT Multimedia Box – Fiber storage loop. Accepts two P&S 2A size Wiremold Open System communication modules or Pass & Seymour OPEN Activate series inserts. Compatible with 2700, 2800, and 2900 Series Raceways.
4 7/8" [124mm]
4 3/4" [121mm]
NM2048* 1 3/4" [44mm]
CM-MMB-293
1 1/2" [38mm]
Three Insert FiberReady® ORT Multimedia Box – Fiber storage loop. Accepts three P&S 2A size Wiremold Open System communication modules or Pass & Seymour OPEN Activate series inserts. Compatible with 2700, 2800, and 2900 Series Raceways.
3" [76mm]
5 3/16" [132mm]
Deep Device Box – For ORT mounting deep voice/ data interface devices. P&S 4 3/4" Has combination [121mm] twistouts for 2700, 2800, OPEN 2900, and NM2000 Series Raceways.
NM2048-2* 1 3/4" [44mm]
4 7/8" [124mm]
4 3/4" [121mm]
7 3/4" [197mm]
Two-Gang Extra Deep ORT Device Box – For mounting multiple P&S voice/data devices when additional OPEN depth is required. Has combination twistouts for 2700, 2800, 2900, and NM200 Series Raceways.
Two-Gang Deep Device ORT Box – For mounting multiple voice/data devices. Has combination P&S twistouts for 2700, 2800, OPEN 2900, and NM2000 Series Raceways.
NOTE: No suffix denotes Ivory finish. Add "WH" suffix for White finish and "FW" suffix for Fog White finish. * Accepts industry standard NEMA faceplates for communication applications.
5
Notes
6
Notes
7
Datacom Connectivity Options Now you have a wide range of options for providing datacom connectivity into Wiremold® Cable Management Systems. They are:
• Ortronics® TracJack® and Series II Modular Connectivity Solutions • Pass & Seymour Activate™ Modular Inserts • Open System Communication Modules Use these icons to determine connectivity options for each Wiremold System component:
ORT P&S OPEN
ORT
ORT
ORT
P&S
P&S
P&S
OPEN
OPEN
OPEN
Ortronics® Connectivity TracJack® Individual Jack System • • • • • •
Front-loading, snap-in design supports future moves adds and changes Inserts for voice, data, audio, and video Available Category 3, 5e, 6, USOC 6-position, and other media Flat or angled 45° exit configurations Choice of 13 colors and color matched to Wiremold Systems Universal T568A/B wiring format
Series II Front-Loading, Module System • • • • • •
Module design features easy snap-in front-loading design Linear 110 punch down format for easy termination Inserts for voice, data, audio, and video Available Category 3, 5e, 6, USOC 6-position, and other media Available in flat or angled 45° exit configurations Color matched to Wiremold Systems
For detailed product selection refer to the Ortronics Catalog or visit www.ortronics.com.
ORT P&S OPEN
Pass & Seymour Legrand Network Wiring Activate™ Series Front-Loading Inserts • • • • •
Modular inserts for voice, data, audio and video applications Front-load, snap-in design Color and texture matched to Wiremold Systems Available Category 3, 5e, 6, as well as 6-position USOC Universal T568A/B wiring format
For detailed product selection refer to the Pass & Seymour Network Wiring Catalog or visit www.passandseymour.com.
ORT
Open Connectivity Solutions
P&S
Wiremold Open System Communications Modules
OPEN
• Accommodate a wide range of manufacturers’ communications outlets including keystone jacks, as well as proprietary solutions from Avaya (Systimax) and NORDX • Modules insert into a wide range of Wiremold Systems • Pre-punched faceplates accept common communication devices NOTE: For more information on integrating connectivity into Wiremold Cable Management Systems contact the Wiremold Applications Engineering Team or your local Wiremold Sales Representative.
Wiremold / Legrand U.S. and International: 60 Woodlawn Street • West Hartford, CT 06110 1-800-621-0049 • FAX 860-232-2062 • Outside U.S. 860-233-6251 Canada: 570 Applewood Crescent • Vaughan, Ontario L4K 4B4 1-800-723-5175 • FAX 905-738-9721 © Copyright 2006 Wiremold / Legrand All Rights Reserved
ED264R6 – Updated April 2006 – For latest specs visit www.wiremold.com
Plugmold® Systems Steel Plugmold Raceway & Multioutlet Assemblies he selection of lengths and fittings in a variety of finishes provides a versatile solution for many applications. Plugmold sections offer single or alternating circuits, standard, or isolated ground receptacles, Snapicoil® harnesses of prewired receptacles, and cord ended units. Steel Plugmold comes in black or ivory ScuffCoat™ finish and white or gray enamel finish. The ScuffCoat finish is scratch resistant and protects against nicks and chips while preventing color from fading. The enamel finishes are neutral colors that work with many decors or can be painted to integrate with most color schemes. Select Plugmold sections and fittings are now available in a durable stainless steel.
T
Plugmold Systems come in a variety of finishes and configurations.
Features & Benefits ■ Steel construction. Provides superior strength and durability for any dry location installation. ■ Many finishes. Black or ivory ScuffCoat finish, white or gray enamel and select sections and fittings in stainless steel. ■ Compact, low profile appearance. Requires minimal space. ■ Full range of fittings. Provides a complete wiring solution. ■ Single, alternating circuit, and isolated ground receptacles available. Meets virtually any job requirement. ■ Variety of lengths. Ideal for different spaces. ■ Choose receptacle spacing. Suits many applications.
■ Snapicoil harnesses with different lengths and receptacle spacing. Offers a solution for many electrical requirements. ■ Duplex receptacle. Aesthetically pleasing, functional 20A duplex for the 24S (2400) Series. ■ Single- and dual-gang boxes available. Wire devices into the raceway system. ■ Customization available. All products can be modified to accommodate virtually any application. ■ cULus Listed. Safety and reliability in the applications.
Plugmold Systems shown in typical applications.
ED1412 – May 2006 – For latest specs visit www.wiremold.com
Plugmold 2000 System Layout
K N I
D C B
M
E
L
H G
O A
J F
Q M
A B C D E F G H I
— — — — — — — — —
2010B 2051H 2006 2017TC 2015 2048-2 2018C 2048 2011
P
Blank End Fitting Flush Plate Adapter Cover Clip Internal Corner Coupling Tee Fitting Two-Gang Device Box External Elbow Cover Single-Gang Device Box 90° Flat Elbow
J — K — L — M— N— O— P — Q—
20GB506 2089A 5748 500 2010A2 2010A3 518 2089E
Plugmold Strip Side-Reducing Fitting Single-Gang Device Box Raceway Entrance End Fitting Entrance End Fitting External Elbow End-Reducing Connector
NOTE: Illustration is for showing product applications only.
Cross Section Catalog No./Item
Description/Specifications
Catalog No./Item
Description/Specifications
2000*
Base and Cover – Base – 2000B .040" [1.0mm] steel. Cover – 2000C .025" [.6mm] steel.
G2400 V2400
Base and Cover – Base – G2400B or V2400B .040" [1.0mm] steel. Cover – G2400C or V2400C .040" [1.0mm] steel. Also available in custom colors.
7/8" [22.2mm] 3/4" [19.1mm]
Cross-Sectional Area: 1.39in2 [897mm2]
Cross-Sectional Area: 0.80in2 [516mm2] 1 29/32" [48mm]
1 9/32" [33mm]
* Use “V” prefix for Ivory ScuffCoat™ finish, “G” prefix for Gray enamel finish, “BK” for Black ScuffCoat™ finish, “WH” for white enamel finish, and “S” for stainless steel.
2
V/G 2000 Series Catalog No./Item
Description/Specifications
Catalog No./Item
Base and Cover Covers seam ITEM CAT NO. Base V/G 2000B-5* Cover V/G 2000C* Base & Cover V/G 2000BC*
V2003 2003
2" [51mm]
W30
LENGTH [1.5m] [1.5m] [1.5m]
MATERIAL .040 Steel .025 Steel .025 Steel
Wire Clip – Holds conductors in place in raceway.
2001
Coupling – For joining lengths of 2000 Series Raceway Base. at any point 2" [51mm]
BK2006* 3/4" G2006* [19.1mm] V2006* WH2006* S2006*
BK2010A3* G2010A3* V2010A3* WH2010A3*
BK2010B* G2010B* V2010B* WH2010B* S2010B*
Blank End Fitting – For closing the open end of raceway. Use with V/G 2000 Series. 3/4" [19.1mm]
BK2051* G2051* V2051* WH2051* S2051*
Pressure-Type Wire Connector – For common connection of two, three, or four No. 12 or No.14 solid copper conductors. Not for connection of equipment grounding conductor. 300V maximum; 20A 60° C maximum. Not for use with aluminum conductors.
2000WC 2400WC AL2000WC
Ground Clamp – For connection of equipment grounding conductor to provide additional ground to raceway. Use with V/G2000 Series.
How 2009 is used.
Supporting Clip – For temporary support, while positioning lengths of raceway base. Use with V/G 2000 Series. V2003 has ivory finish, 2003 has plated finish.
1 5/16" [33mm]
1 7/32" [31mm]
2009 between sections of 5400C. 5' 5' 5'
Description/Specifications
Flush Plate Adapter – For feeding 2000 from an existing wall outlet. Equipped with 1/2" [12.7mm] threaded stud, toothed lockwasher for grounding, and conduit bushing.
4 1/2" [114mm]
Plugmold 2000 extended from wall outlet using 2051H.
2051H fastened to horizontally mounted wall box.
BK2011* G2011* V2011* WH2011*2 1/2" S2011* [64mm]
90º Flat Elbow – For right angle turns on same surface. Cover stop permits neat butting of 2000C Cover. Two couplings furnished.
Ea. Leg
2017TC desired. Base come together.
Internal Corner Coupling – Furnished with one fiber bushing.
1 1/2" [38mm]
2017TC
Cover Clip – For covering joint where lengths of cover or base adjoin. Use with V/G 2000 Series.
2000B
1 1/2" [38mm]
2017TC
BK2018C* G2018C* V2018C* WH2018C* S2018C* 1 7/8" [48mm]
3 22/64" [94mm]
1 9/32" [58mm] 1 1/2" [38mm]
2017TC used as a corner coupling. 2017TC used as a corner coupling and a straight-through fitting.
2000B
Entrance End – Offers larger capacity than V2010A2. 1/2" trade size KOs on end, each side and bottom. 3/4" trade 1 29/32" size KOs on bottom and rear. [47mm] 2 11/16" Includes ground screw. Use [67mm] with V/G 2000 Series.
2 7/64" [53mm]
BK2010A2* G2010A2* V2010A2* WH2010A2* S2010A2*
2051H fastened to vertically mounted wall box.
External Elbow – To continue raceway runs around outside corner. Fills the gap when external corner is made by notching and bending the 2000 Base.
Cover gap filler snapped into place in 2018C.
Entrance End – For connecting V2000 with 1/2" conduit and armored cable connectors. 1/2" trade size KOs on end, each side and bottom. Includes ground screw. Use with V/G 2000 Series.
BK2015* G2015* V2015C* WH2015C*
Tee – For branches at right angles. Couplings furnished. 6" [152mm] 1 1/2" [38mm]
2 1/8" [54mm]
4" [102mm] 3" [76mm]
* Use “V” prefix for Ivory ScuffCoat™ finish, “G” prefix for Gray enamel finish, “BK” for Black ScuffCoat™ finish, “WH” for white enamel finish, and “S” for stainless steel. 3
V/G 2000 Series
(continued)
Catalog No./Item
Description/Specifications
Catalog No./Item
Description/Specifications
BK2048* G2048* V2048* WH2048* S2048*
Single Gang Device Box – Cover has twistouts for 2000, V500, and V700 Raceway. Base has 1/2" trade KO and rectangular KO for extension to wall box. Base has #10 threaded hole for ground connection.
V2089E
End Reducing Connector – For connecting V2000 with V500 Raceway through end of V2000.
4 5/8" [117mm]
2 7/8" [73mm]
3/4" [19.1mm]
1 3/4" [44mm]
V2048-2 4 3/4" [121mm]
4 3/4" [121mm]
1 3/4" [44mm]
V2089
3 1/4" [83mm]
6" [152mm]
rectangular KO for extension to wall box. Base has #10 threaded
620
2000 Raceway Base and Cover Cutter – Portable cutter for 2000 Cover and Base. Tool steel construction for clean and easy square cuts every time. Total manual operation.
620BCK
Replacement Blade Kit – Replacement blades and die set for 620 Cutter.
Two-Gang Device Box – Cover has G2048-2 Twistouts for 2000, V500, and V700 Raceway. Base has 1/2" trade KO and rectangular KO for extension to wall box. Base has #10 threaded hole for ground connection.
Side Reducing Connector – For connecting V2000 with V500 Raceway through side of V2000. orange receptacles. Couplings furnished.
* Use “V” prefix for Ivory ScuffCoat™ finish, “G” prefix for Gray enamel finish, “BK” for Black ScuffCoat™ finish, “WH” for white enamel finish, and “S” for stainless steel.
trade size V2400 Series Catalog No./Item
ITEM Base Cover Base & Cover
CAT NO. V2400B V2400C V2400BC
Description/Specifications
Catalog No./Item
Description/Specifications
Base and Cover Covers seam between sections of 5400C.
2409
Ground Clamp – No. 10 ground screw provided. Use with V2400 Series.
5' 5' 5'
LENGTH [1.5m] [1.5m] [1.5m]
MATERIAL .040 Steel .040 Steel .040 Steel
1/2" [12.7mm]
V2410A 2" [51mm]
2401
Coupling – For joining lengths of raceway. Use with V2400 Series.
2" [51mm] 1 5/8" [41mm]
Entrance End – For connecting V2400 with 1/2" trade size conduit and armored cable. Use with V2400 Series.
1 3/16" [46mm]
2400WC 2400WC AL2000WC AL2400WC NM2000WC 1"
V2410B
Wire Clip – Holds conductors in place in raceway.
Blank End – For closing open end of V2400 Series. 1 3/16" [30mm]
[25mm]
V2410C V2406
1 1/2" [38mm]
Cover Clip – For covering joint where lengths of cover or base adjoin. Use with V2400 Series (nonmetallic).
2 11/16" 1 7/8" [68mm] [48mm] 2 1/8" [54mm]
4
Entrance End Fitting – Has 1/2" and 3/4" trade size KOs on end and bottom. Additional 1/2" trade size KO on sides.
V2400 Series Catalog No./Item V2411 15/16" [23.8mm]
Description/Specifications
Catalog No./Item
Description/Specifications
90º Flat Elbow – For right angle turns on the same surface (nonmetallic cover).
V2489
Side Reducing Connector – For connecting V2400 with V500 Raceway.
V2444 V2444-2
Extra Deep Device Box – Base has rectangular knockout to enable extension from existing single-gang flush wall box and 1/2" and 1" concentric KOs. V2444 Cover has two twistouts for 500 and 700, and two twistouts for 2400. V2444-2 Cover has four 2400 Series twistouts.
2 1/16" [52mm] 3 7/8" [98mm]
V2417
Internal Elbow – For making internal 90° corners. All steel construction.
CAT NO. V2444 V2444-2
1 29/32" [49mm]
1 5/8" [41mm]
V2418
External Elbow – For covering outside corners (nonmetallic cover).
V2451H 4 1/2" [114mm]
Back Feed Fitting – For feeding V2400 Raceway from an existing outlet box. Equipped with 1/2" trade size male bushing and locknut washer for grounding.
4 1/2" [114mm]
V2448 V2448-2
L
W
D
CAT NO. V2448 V2448-2
L 4 5/8" [117mm] 4 3/4" [121mm]
4 3/4" [121mm] 2 3/4" [70mm]
1 3/4" [45mm]
V2417M
4 3/4" [121mm]
Internal Elbow – For making internal corners (nonmetallic cover).
1 5/8" [41mm]
(continued)
Device Box – Cover has one twistout for 2400 on each side and ends. Base has 1/2" trade KO and rectangular KO for extension to wall box. Base has #10 threaded hole for ground connection. W 2 7/8" [73mm] 4 3/4" [121mm]
D 1 3/4" [44mm] 1 3/4" [44mm]
GANG # 1 2
5
L 4 5/8" [117mm] 4 3/4" [121mm]
W 2 7/8" [73mm] 4 3/4" [121mm]
D 1 3/4" [44mm] 1 3/4" [44mm]
GANG # 1 2
624
2400 and 2400BD Raceway & Cover Cutter – Portable cutter for 2400B and 2400BD Raceway and Cover. Tool steel construction for clean and easy square cuts. Total manual operation.
624BCK
Replacement Blade Kit – Replacement blades and die set for 624 Cutter.
Plugmold with Snapicoil Harness CATALOG NO.
WIRING CONFIG
LENGTH
OUTLETS (15A 120V NEMA 5-15SR) HOLE CUT COVER CENTER DISTANCE QUANTITY QUANTITY LENGTH
Feet
[meters]
20GB12
48'
[14.63]
20GB18
48'
[14.63]
V20GB30
50'
[15.25]
GB
30"
20GBA12
48'
[15.24]
GBA
12"
HOUSING
Inches
[mm]
Inches
[mm]
GB
12"
[305mm]
48 Single
GB
18"
[457mm]
32 Single
8
6'
[1.8m]
Steel – Ivory, Gray
8
6'
[1.8m]
Steel – Ivory, Gray
[760mm]
20 Single
10
5'
[1.5m]
Steel – Ivory
[305mm]
48 Single
8
6'
[1.8m]
Steel – Ivory, Gray
Cord-Ended Plugmold Series UNIT LENGTH
CAT NO. 20-C2
3' 4"
OUTLETS QUANTITY
[1m]
CORD SET LENGTH
6 Single
6'
[1.8m]
TYPE
SWITCH
CIRCUIT BREAKER
12/3 SJT
No
Yes
FINISH Steel – Gray, Ivory
Plugmold Wire Fill Capacities for Power CABLE TYPE
WIRE SIZE THHN/THWN
O.D.
NO. OF CONDUCTORS (40% FILL) V2000 V2400
Inches
[mm]
POWER WIRING WITHOUT DEVICES
8 10 12 14
AWG AWG AWG AWG
0.216 0.166 0.130 0.111
[5.5] [4.2] [3.3] [2.8]
– – 7* 7*
– 26 41 57
POWER WIRING WITH DEVICES (PLUGMOLD)
8 10 12 14
AWG AWG AWG AWG
0.218 0.153 0.122 0.105
[5.5] [3.9] [3.1] [2.7]
– – 5* 5*
2 6 10 –
*Wire capacity limited to maximum of seven conductors due to .025" [.6mm] material thickness of cover. **Including one hot, neutral, and ground wire from the receptacle.
Wiring Configuration With Snapicoil GB Series: 3-wire, #12 THHN (1 hot, 1 neutral and 1 ground), 1 circuit; has insulated grounding conductor.
GBA Series: 4-wire, #12 THHN (2 hot, 1 neutral and 1 ground), 2 circuit; outlets wired alternately; has insulated grounding conductor.
IG Series: 3-wire, #12 THHN (1 hot, 1 neutral and 1 ground), 1 circuit; has insulated-isolated grounding conductor. Orange receptacles.
GB Series: 3-wire, #12 THHN (1 hot, 1 neutral and 1 ground), 1 circuit; has insulated grounding conductor.
GBA Series: 4-wire, #12 THHN (2 hot, 1 neutral and 1 ground), 2 circuit; outlets wired alternately; has insulated grounding conductor.
NOTE: SNAPICOIL REELS on custom order. Snapicoil is available on reels if lengths greater than 50’ are needed, or if multiple lengths are required for production-type jobs. The maximum length per reel is 240’ for Snapicoil with outlets 12” and 18” on centers; 500’ with outlets 30” on center. Packaging includes the necessary number of lengths of base, holecut cover, wire clips, and couplings for complete installation. Price and delivery information should be obtained prior to specifying or ordering. To specify or order, add R to the Snapicoil number. Ex: V20GB12R. Other outlet spacings available on custom order. Receptacles are made from high impact thermoplastic. V2000 Plugmold is supplied with two (2) V2010B Blank End Fittings and (1) 2001 Base Coupling. NM2000 Plugmold strips are supplied with two (2) NM2010B Blank End Fittings.
6
Plugmold Multi Outlet Strip CATALOG NO.
LENGTH Feet [mm]
WIRING CONFIG
OUTLETS CENTER DISTANCE QUANTITY Inches [mm]
FINISH
20GB206 20GB306 V24GB306
2' 3' 3'
[610mm] [915mm] [915mm]
GB GB GB
6" 6" 6"
[152mm] [152mm] [152mm]
4 Single 6 Single 6 Single
15A 15A 20A
Steel – S Steel – WH, BK, V, G, S Steel – V
24S3612GBX99IV
3'
[915mm]
GB
12"
[305mm]
3 Duplex
20A
Steel – V, G
24S3612GBA99IV
3'
[915mm]
GBA
12"
[305mm]
3 Duplex
20A
Steel – V, G
20GB506
5'
[1.5m]
GB
6"
[152mm]
10 Single
15A
Steel – WH, BK, V, G, S
V24GB506
5'
[1.5m]
GB
6"
[152mm]
10 Single
20A
Steel – WH, BK, V, G, S
20GB512
5'
[1.5m]
GB
12"
[305mm]
5 Single
15A
Steel – WH, BK, V, G, S
V24GB512
5'
[1.5m]
GB
12"
[305mm]
5 Single
20A
Steel – V
20IG512
5'
[1.5m]
IG
12"
[305mm]
5 Single
15A
Steel – V, G
20GBA512
5'
[1.5m]
GBA
12"
[305mm]
5 Single
15A
Steel – V, G
V24GBA512
5'
[1.5m]
GBA
12"
[305mm]
5 Single
20A
Steel – V
24S6012GBX99IV
5'
[1.5m]
GB
12"
[305mm]
5 Duplex
20A
Steel – V, G
24S6012GBA99IV
5'
[1.5m]
GBA
12"
[305mm]
5 Duplex
20A
Steel – V, G
24S6012IGX99IV
5'
[1.5m]
IG
12"
[305mm]
5 Duplex
20A
Steel – V, G
20GB606
6
[1.8m]
GB
6"
[152mm]
12 Single
15A
Steel – WH, BK, V, G, S
V24GB606
6
[1.8m]
GB
6"
[152mm]
12 Single
20A
Steel – V
20IG606
6
[1.8m]
IG
6"
[152mm]
12 Single
15A
Steel – V, G
20GB609
6
[1.8m]
GB
9"
[229mm]
8 Single
15A
Steel – V, G
20GBA609
6
[1.8m]
GBA
9"
[229mm]
8 Single
15A
Steel – V, G
20GB612
6'
[1.8m]
GB
12"
[305mm]
6 Single
15A
Steel – WH, BK, V, G, S
20GBA612
6
[1.8m]
GBA
12"
[305mm]
6 Single
15A
Steel – V, G
V24GB612
6'
[1.8m]
GB
12"
[305mm]
6 Single
20A
Steel – V
V24GBA612
6'
[1.8m]
GBA
12"
[305mm]
6 Single
20A
Steel – V
V24GB618
6'
[1.8m]
GB
12"
[305mm]
6 Single
20A
Steel – V
20GB618
6
[1.8m]
GB
18"
[457mm]
4 Single
15A
Steel – V, G
20GBA618
6
[1.8m]
GBA
18"
[457mm]
4 Single
15A
Steel – V, G
V24GBA618
6'
[1.8m]
GBA
18"
[457mm]
4 Single
20A
Steel – V
24S7212GBX99IV
6
[1.8m]
GB
12"
[305mm]
6 Duplex
20A
Steel – V, G
24S7224GBA99IV
6
[1.8m]
GBA
24"
[608mm]
3 Duplex
20A
Steel – V, G
24S7218GBX99IV
6
[1.8m]
GB
18"
[457mm]
4 Duplex
20A
Steel – V, G
24S7224GBX99IV
6
[1.8m]
GB
24"
[608mm]
5 Duplex
20A
Steel – V, G
24S7218IGX99IV
6
[1.8m]
IG
18"
[457mm]
5 Duplex
20A
Steel – V, G
24S7212IGX99IV
6
[1.8m]
IG
12"
[305mm]
6 Duplex
20A
Steel – V, G
24S7224IGX99IV
6
[1.8m]
IG
24"
[608mm]
3 Duplex
20A
Steel – V, G
24S7212GBA99IV
6
[1.8m]
GBA
12"
[305mm]
6 Duplex
20A
Steel – V, G
24S7218GBA99IV
6'
[1.8m]
GBA
18"
[457mm]
4 Duplex
20A
Steel – V, G
NOTE: “V” indicates Ivory ScuffCoat™ finish, “G” indicates Gray ScuffCoat™ finish, “WH” indicates White enamel finish, “BK” indicates Black enamel finish, and “S” indicates Stainless Steel finish.
7
Datacom Connectivity Options Now you have a wide range of options for providing datacom connectivity into Wiremold® Cable Management Systems. They are:
• Ortronics® TracJack® and Series II Modular Connectivity Solutions • Pass & Seymour Activate™ Modular Inserts • Open System Communication Modules Use these icons to determine connectivity options for each Wiremold System component:
ORT P&S OPEN
ORT
ORT
ORT
P&S
P&S
P&S
OPEN
OPEN
OPEN
Ortronics® Connectivity TracJack® Individual Jack System • • • • • •
Front-loading, snap-in design supports future moves adds and changes Inserts for voice, data, audio, and video Available Category 3, 5e, 6, USOC 6-position, and other media Flat or angled 45° exit configurations Choice of 13 colors and color matched to Wiremold Systems Universal T568A/B wiring format
Series II Front-Loading, Module System • • • • • •
Module design features easy snap-in front-loading design Linear 110 punch down format for easy termination Inserts for voice, data, audio, and video Available Category 3, 5e, 6, USOC 6-position, and other media Available in flat or angled 45° exit configurations Color matched to Wiremold Systems
For detailed product selection refer to the Ortronics Catalog or visit www.ortronics.com.
ORT P&S OPEN
Pass & Seymour Legrand Network Wiring Activate™ Series Front-Loading Inserts • • • • •
Modular inserts for voice, data, audio and video applications Front-load, snap-in design Color and texture matched to Wiremold Systems Available Category 3, 5e, 6, as well as 6-position USOC Universal T568A/B wiring format
For detailed product selection refer to the Pass & Seymour Network Wiring Catalog or visit www.passandseymour.com.
ORT
Open Connectivity Solutions
P&S
Wiremold Open System Communications Modules
OPEN
• Accommodate a wide range of manufacturers’ communications outlets including keystone jacks, as well as proprietary solutions from Avaya (Systimax) and NORDX • Modules insert into a wide range of Wiremold Systems • Pre-punched faceplates accept common communication devices NOTE: For more information on integrating connectivity into Wiremold Cable Management Systems contact the Wiremold Applications Engineering Team or your local Wiremold Sales Representative.
Wiremold / Legrand U.S. and International: 60 Woodlawn Street • West Hartford, CT 06110 1-800-621-0049 • FAX 860-232-2062 • Outside U.S. 860-233-6251 Canada: 570 Applewood Crescent • Vaughan, Ontario L4K 4B4 1-800-723-5175 • FAX 905-738-9721 © Copyright 2006 Wiremold / Legrand All Rights Reserved
ED1412 – May 2006 – For latest specs visit www.wiremold.com