Panel Mount LED Indicators 2016

Panel Mount LED Indicators 2016

www.apem.com PANEL SWITCHES

PCB SWITCHES

JOYSTICKS

SWITCH PANELS

LED INDICATORS

Q, QRM,QRM-NV & QS Series Selection Guide

Q6 Series

Q8 Series • Panel mount Ø6mm • Red, green, yellow, blue, white & orange LED • Bi-color & super bright LED • Prominent, recessed & flush bezels • Bright/black chrome or satin grey finish • 7 types of termination • Panel sealed to IP67 • Voltage 2VDC to 28VAC/DC

• Panel mount Ø8mm • Red, green, yellow, blue, white & orange LED • Bi/Tri-color & super bright LED • Prominent, recessed & flush bezels • Bright/black chrome or satin grey finish • 8 types of termination • Panel sealed to IP67 • Voltage 2VDC to 220VAC

Pages 8 to 12

Pages 3 to 7

Q12 Series

Q14 Series • Panel mount Ø14mm • Red, green, yellow, blue, white & orange LED • Bi/Tri-color & super bright LED • Prominent, recessed & flush bezels • Bright/black chrome or satin grey finish • Custom engraving options • Panel sealed to IP67 • Voltage 2VDC to 220VAC

• Panel mount Ø12mm • Red, green, yellow, blue, white & orange LED • Bi/Tri-color & super bright LED • Prominent bezel • Bright/black chrome or satin grey finish • 7 types of termination • Panel sealed to IP67 • Voltage 2VDC to 220VAC

Pages 13 to 16

Q16 Series

• Panel mount Ø16mm • Red, green, yellow, blue, white & orange LED • Bi/Tri-color & super bright LED • Prominent & flush bezels • Bright/black chrome or satin grey finish • Secret until lit & engraving options • Panel sealed to IP67 • Voltage 2VDC to 220VAC

Q22 Series

Pages 22 to 27

Pages 17 to 21

Q19 Series • Panel mount Ø19mm • Red, green, yellow, blue, white & orange LED • Bi/Tri-color & super bright LED • Prominent & flush bezels • Bright/black chrome or satin grey finish • Custom engraving options • Panel sealed to IP67 • Voltage 2VDC to 220VAC

QRM Series

• Rear Panel Mount Ø6 & Ø8mm • Red, green, yellow, blue & white LED • Bi/Tri-color, hyper bright LED • Protected bezel • Black chrome finish • 2 types of termination • Panel sealed to IP67 • Voltage 2VDC to 28VAC/DC

• Panel mount Ø22mm • Red, green, yellow, blue & white LED • Bi/Tri-color & super bright LED • Prominent & flush bezels • Bright/black chrome or satin grey finish • Custom engraving options • Panel sealed to IP67 • Voltage 2VDC to 220VAC

QRM-NV Series

Pages 33 to 37

QS Series

• Rear Panel Mount Ø8mm • NVIS Green A & B,Yellow, Red, & White • NVIS compliant to MIL Std 3009 • Protected bezel • Black chrome finish • 2 types of termination • Panel sealed to IP67 • Voltage 2VDC to 28VAC/DC

Pages 47 to 50 APEM

Pages 28 to 32

Pages 38 to 46

• 6 LED colors • 2VDC to 220VAC • Snap in LED indicators • Push on tab or wire terminals • Panel mount Ø6, Ø8, Ø10 & Ø12mm For typical replacement of filament and neon indicators, offering long service life & high reliability.

Pages 51 to 54

www.apem.com

2

Q6 SERIES

Ă˜6mm (.236") Panel Mount LED Indicators

Distinctive features Panel mount LED indicators with 3mm colored diffused epoxy lens or 3mm water clear super bright LEDs. Bright chrome, black chrome or satin grey bezel finish.

Prominent, recessed and flush bezel styles. Voltage: 2VDC - 28VDC. Terminals: 2.0 x 0.5 solder lug/fastons, pins or 200mm long wires.

IP67 sealing option (EN60529).

Supplied with fixing nut and spring washer.

Typical Applications Process Controls Professional Electrical Appliances Communications, Radar Civil engineering vehicles, trucks, diggers, crane Trains HVAC, Energy Management Lifts Machine Tools

APEM

www.apem.com

3

Q SERIES Ø6mm (.236") Panel Mount LED Indicators

Distinctive features and specification

VOYC1603R1US

Features • 6mm panel mounting LED indicator • 3mm colored diffused epoxy lens or 3mm water clear super bright LEDs • Plated brass bezel finished in bright chrome, black chrome or satin grey and moulded polycarbonate rear body • • • • •

Prominent, recessed and flush bezel styles 2VDC – 28VDC (2.0 x 0.5) solder lug terminals, pins or (200mm long) wire terminations IP67 sealing option (EN60529) Supplied with fixing nut and spring washer

NB: UL Recognized Component TECHNICAL SPECIFICATIONS Voltage 02 (No Resistor) 6VDC 12VDC 24VDC 28VDC

Operating Voltage (Min to Max) 1.8 to 3.8VDC 5.4 to 6.6VDC 10.8 to 13.2VDC 21.6 to 26.4VDC 25.2 to 30.8VDC

Operating Current (Typical All Types) 20mA max* 20mA 20mA 20mA 20mA

Max Reverse Voltage: 5V Viewing Angle: 30–100° (dependant on model) Life Expectancy: 100,000 hours Temperature Range: –40 to +85°C (operating & storage) Torque: 4cNm Ø 6.00 +0.15/-0.0

8,00 0,315

AF 2,00 0,079

PANEL CUTOUT M6 x 0,50 THREAD

Standard LED Intensity HE Red Green Yellow Blue White Orange Bi-color (Typical) (Red/Green)

Flush Prominent and Recessed 40mcd 10mcd 50mcd 12mcd 30mcd 6mcd 1,200mcd 100mcd 1,200mcd 160mcd 60mcd 10mcd 20/15mcd 10/8mcd The color is changed by reversing the polarity of the supply voltage.

Forward Voltage 2.0V 2.2V 2.1V 3.8V 3.8V 2.0V 2.0V/2.2V

Super Bright LED HE Red Green Yellow Blue White Orange

Prominent and Recessed 1,000mcd 1,200mcd 2000mcd 1,600mcd 1,200mcd 10,000mcd

Flush 700mcd 2,000mcd 8,000mcd 200mcd 350mcd 500mcd

Forward Voltage 2.2V 3.5V 2.3V 3.3V 3.3V 2.2V

Hyper Bright LED HE Red Green Yellow Orange

Prominent and Recessed 3,700mcd 2,000mcd 1,200mcd 4,500mcd

Flush 600mcd 350mcd 140mcd 400mcd

Forward Voltage 2.2V 3.2V 2.0V 2.2V

Luminous intensity will be reduced with lower operating current.

Note: The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy.

The company reserves the right to change specifications without notice. * Customer to supply resistor for desired operating current.

Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated.

APEM

www.apem.com

Q SERIES Ø6mm (.236") Panel Mount LED Indicators

7,00 [0,275]

M6x0,5

3,50 0,138 8,75 0,344

2,0x0,5[0,078x0,02]

6,00 0,236

PINS M6x0,5

0,50 0,020 1,25 0,049 1,25 0,049

SOLDER LUG

3,50 0,138 8,75 0,344 17,10 0,673

23,10 0,909

9,50 0,374 11,00 0,433

REAR EPOXY PINS

M6x0,5

3,50 0,138 8,75 0,344 17,10 0,673

7,00 [0,275]

0,50 0,020 1,25 0,049 1,25 0,049

3,50 0,138 8,75 0,344 12,00 0,472

3,50 0,138 8,75 0,344 12,00 0,472

11,00 0,433 9,50 0,374

RECESSED BEZEL

SOLDER LUG 7,00 [0,275]

M6x0,5 2,0x0,5[0,078x0,02]

2,25 0,089 8,75 0,344 18,75 0,738

6,00 0,236

2,25 0,089 8,75 0,344

SHORT BODY WIRES

7,00[0,275]

200,00+/-10 [7,874+/-0,393]

7,00 [0,275]

7,00 [0,275] 3,50 0,138 8,75 0,344 10,00 0,394

SHORT BODY PINS M6x0,5

18,98 0,747 16,60 0,654

3,50 0,138 8,75 0,344 10,00 0,394

200,0+/-10 [7,874+/-0,393]

REAR EPOXY WIRES

M6 x0,5

0,50 0,020 1,25 0,049 1,25 0,049

7,00 [0,275]

7,00 [0,275]

WIRES

24,75 0,974

M6x0,5

200,0+/-10 [7,874+/-0,393]

PINS M6x0,5

11,00 0,433 9,50 0,374

REAR EPOXY PINS

2,25 0,089 8,75 0,344 18,75 0,738

200,0+/-10 [7,874+/-0,393]

2,25 0,089 8,75 0,344 11,65 0,459

200,0+/-10 [7,874+/-0,393]

2,25 0,089 8,75 0,344 11,65 0,459

2,25 0,089 8,75 0,344 13,65 0,537

16,98 0,668 14,60 0,575

www.apem.com

0,50 0,020 1,25 0,049 1,25 0,049

M6 x0,5

18,10 0,713 16,60 0,654

SHORT BODY WIRES

7,00 [0,275]

1,25 0,049

0,50 0,020

M6x0,5

1,25 0,049

SHORT BODY PINS

7,00 [0,275]

7,00 [0,275]

REAR EPOXY WIRES

M6 x0,5

7,00 [0,275]

7,00 [0,275]

WIRES M6x0,5

0,50 0,020 1,25 0,049 1,25 0,049

PROMINENT BEZEL

7,00 [0,275]

Technical Drawings

2,25 0,089 8,75 0,345 13,65 0,537

M6x0,5

200,0+/-10 [7,874+/-0,393]

APEM

Q SERIES Ø6mm (.236") Panel Mount LED Indicators

Technical Drawings

8,75 0,344 1,00 0,039

M6x0,5

27,00 1,063

2,0x0,5 [0.078x0.02]

PINS M6x0,5

1,00 0,039 8,75 0,344 21,00 0,827

6,00 0,236

11,00 0,433

0,50 0,020 1,25 0,049 1,25 0,049

7,00 [0,275]

SOLDER LUG

7,00 [0,275]

FLUSH BEZEL

1,00 0,039 8,75 0,344 21,00 0,827

WIRES

200,0 +/-10 [7,874+/-0,393]

APEM

200,0+/-10 [7,874+/-0,393]

1,00 ,039 8,75 0,344 15,90 0,626

11,00 0,433 9,50 0,374

www.apem.com

M6 x0,5

16,60 0,654 18,10 0,713

SHORT BODY WIRES 7,00 [0,275]

M6x0,5

0,50 0,020 1,25 0,049 1,25 0,049

SHORT BODY PINS 7,00 [0,275]

7,00 [0,275] 1,00 0,039 8,75 0,344 13,90 0,547

M6 x0,5

1,00 0,039 8,75 0,344 13,90 0,547

0,50 0,020 1,25 0,049 2,50 0,098

M6x0,5

REAR EPOXY WIRES

REAR EPOXY PINS

7,00 [0,275]

7,00 [0,275]

9,50 0,374

1,00 0,039 8,75 0,344 15,90 0,626

M6x0,5

200,0 +/-10 [7,874 +/- 0,393]

Q SERIES Ø6mm (.236") Panel Mount LED Indicators Overview

STANDARD OPTIONS The Q6 Series is available with a range of standard options, to specify your LED, simply choose one option from each column. An example is shown below.

Q

6

P

1

B

XX

G

12

E

SERIES

MOUNTING HOLE

BEZEL STYLE

TERMINALS

BEZEL FINISH

TYPE OF ILLUMINATION

LED COLOR

VOLTAGE

SEALING

P = Prominent

1 = Solder Lug

C = Bright Chrome

XX = Fixed Light

R = Red

R = Recessed

2 = Pins

B = Black Chrome

G = Green

F = Flush

3 = Wires

G = Satin Grey

KK = Flashing Light (12V – 28VDC) YY = Bi-color

B = Blue

Q

6 = Ø6mm

4 = Rear epoxy Pins

Y = Yellow W = White

02 = no resistor*

(Blank) = Unsealed

06 = 6VDC

E = IP67

12 = 12VDC 12A = 12VAC/DC 24 = 24VDC

5 = Rear epoxy Wires

O = Orange

6 = Short body Pins

HR = Hyper Bright Red

28 = 28VDC

7 = Short body Wires

HG = Hyper Bright Green

28A = 28VAC/DC

HY = Hyper Bright Yellow

24A = 24VAC/DC

HO = Hyper Bright Orange SR = Super Bright Red SG = Super Bright Green SY = Super Bright Yellow SB = Super Bright Blue SW = Super Bright White

Example Q6F3CXXB12E Ø6mm, flush bezel, wire terminals bright chrome finish, fixed light, blue, 12VDC LED, IP67 panel sealed

SO = Super Bright Orange RG = Red/Green RY = Red/Yellow GY = Green/Yellow

• Gold solder lug terminal denotes Anode (+), silver terminal denotes Cathode (-) • Standard wire length is 200mm, 24AWG UL 1061, red wire denotes Anode (+), black wire denotes Cathode (-) for other wire lengths consult APEM • For LEDs with alternative voltages consult APEM • Bi-color LEDs, by connecting the gold solder lug (+) one color is produced, by reversing the supply voltage another color is produced – Bi-colors are available up to 28VDC • Take care when soldering to the terminals (recommended solder temperature 300°C - 3 sec) • Short body options are only available up to 24VDC • Maximum panel thickness 7mm * = For resistorless versions (02) please refer to the forward voltage

www.apem.com

APEM

Q8 SERIES

Ă˜8mm (.315") Panel Mount LED Indicators

Distinctive features Panel mount LED indicators with 5mm colored diffused epoxy lens or 5mm water clear super bright LEDs. Bright chrome, black chrome or satin grey bezel finish.

Prominent, recessed and flush bezel styles. Voltage: 2VDC - 220VAC. Terminals: 2.8 x 0.8 solder lug/fastons, pins or 200mm long wires.

IP67 sealing option (EN60529). Supplied with fixing nut and spring washer.

Typical Applications Medical Telecommunications Engineering Transport Systems Special Vehicles Agricultural Vehicles

APEM

www.apem.com

8

Q SERIES Ø8mm (.315") Panel Mount LED Indicators

Distinctive features and specification

VOY1603R3US

Features • 8mm panel mounting LED indicator • 5mm colored diffused epoxy lens or 5mm water clear super bright LEDs • Plated brass bezel finished in bright chrome, black chrome or satin grey and moulded polycarbonate rear body • Prominent, recessed and flush bezel styles • 2VDC – 220VAC • (2.8 x 0.8) solder lug/faston terminals, pins or (200mm long) wire terminations (2.0 x 0.5) solder lug/faston terminals on tricolor versions • IP67 sealing option (EN60529) • Supplied with fixing nut and spring washer NB: UL Recognized Component TECHNICAL SPECIFICATIONS Voltage 02 (No Resistor) 6VDC 12VDC 24VDC 28VDC 110VAC 220VAC

Operating Voltage (Min to Max) 1.8 to 3.3VDC 5.4 to 6.6VDC 10.8 to 13.2VDC 21.6 to 26.4VDC 25.2 to 30.8VDC 99 to 121VAC 207 to 253VAC

Operating Current (Typical All Types) 20mA max* 20mA 20mA 20mA 20mA 6mA 3mA

Max Reverse Voltage: 5V Viewing Angle: 30–100° (dependant on model) Life Expectancy: 100,000 hours Temperature Range: –40 to +85°C (operating & storage) Torque: 20 to 25cNm Ø 8.00 +0.15/-0.0

PANEL CUTOUT

10,00 0,394

AF 2,00 0,079

M8 x 0,75 THREAD

Standard LED Intensity Prominent and Recessed Flush Forward Voltage HE Red 80mcd 8mcd 2.0V Green 60mcd 6mcd 2.2V Yellow 50mcd 6mcd 2.1V Blue 1600mcd 50mcd 3.3V White 1600mcd 500mcd 3.3V Orange 60mcd 110mcd 2.2V Bi-color (Typical) (Red/Green) 14/30mcd 15/10mcd 2.0V/2.2V Tri-color (Typical) (Red/Green/Yellow) 60/15/13mcd 15/10/6mcd 2.0V/2.2V/2.1V Bi-color - The color is changed by reversing the polarity of the supply voltage.

Tri-color - The indicator has red and green LEDs, when both connected yellow is produced.

Super Bright LED HE Red Green Yellow Blue White Orange

Prominent and Recessed 5,000mcd 10,000mcd 4,000mcd 2,200mcd 2,500mcd 4,000mcd

Flush 1,300mcd 1,200mcd 350mcd 280mcd 950mcd 500mcd

Forward Voltage 2.2V 3.3V 2.0V 3.3V 3.3V 2.2V

Hyper Bright LED HE Red Green Yellow Orange

Prominent and Recessed 6,000mcd 1,900mcd 1,600mcd 2,400mcd

Flush 980mcd 300mcd 250mcd 110mcd

Forward Voltage 2.2V 3.3V 2.0V 2.2V

Luminous intensity will be reduced with lower operating current.

Note: The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy.

The company reserves the right to change specifications without notice. * Customer to supply resistor for desired operating current.

Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated.

Luminous intensities and color shades of white LEDs may vary within a batch.

APEM

www.apem.com

Q SERIES Ø8mm (.315") Panel Mount LED Indicators

Technical Drawings

PROMINENT BEZEL

28,75 1,132

5,10 0,201 8,75 0,344 10,50 0,413

20,88 0,822 19,38 0,763

M8x0,75



5,10 0,201 8,75 0,345 10,50 0,413

200,0 +/-10 [7,874 +/-0,393]

5,10 0,201 8,75 0,344 12,50 0,492

SHORT BODY SOLDER LUG/FASTONS



18,00 0,709 16,50 0,650

EXTENDED SHORT BODY SOLDER LUG/FASTONS

M8x0,75 2,8x0,8 [0,11x0,031]

5,10 0,201 8,75 0,344 12,50 0,492

200,0 +/-10 [7.874+/-0,393]

9,50 0,374

9,50 0,374

M8x0,75

9,50 0,374

9,50 0,374

 5,10 0,201 8,75 0,344 12,50 0,492

SHORT BODY PINS

REAR EPOXY WIRES

SHORT BODY WIRES

M8x0,75

200,0+/-10 [7,874+/-0,393]

5,10 0,201 8,75 0,344 22,50 0,886



0,50 0,020 1,25 0,049 1,25 0,049



9,50 0,374

REAR EPOXY PINS

M8x0,75

9,50 0,374

8,00 0,315 6,50 0,256 22,50 0,886

2,8x0,5[0.11x0.019] M8x0,75

10,00 0,394 9,35 0,368

5,10 0,201 8,75 0,344 15,50 0,610

10,00 0,394 9,35 0,009

0,50 0,020 1,25 0,049 1,25 0,049

5,10 0,201 8,75 0,344

9,50 ,374

10,00 0,394 9,35 0,368



 5,10 0,201 8,75 0,344

M8x0,75



M8x0,75



2,8x0,8[0,11x0,031]

0,50 0,020 1,25 0,049 1,25 0,049

M8x0,75

WIRES

PINS 9,50 0,374

9,50 0,374

SOLDER LUG/FASTONS

RECESSED BEZEL

25,50 1,004

31,75 1,250

9,50 0,374

200,0+/-10 [7,874+/-0,393]

SHORT BODY SOLDER LUG/FASTONS 9,50 0,374

M8x0,75 2,8x0,8[0,11x0,031]



9,50 0,374

 3,00 0,118 8,75 0,344 15,50 0,610

200,00 +/-10 [7,874+/-0,393]

9,50 0,374

SHORT BODY PINS

M8x0,75



3,00 0,118 8,75 0,344 13,50 0,531

SHORT BODY WIRES

M8x0,75

200,00+/-10 [7,874+/-0,393]

3,00 0,118 8,75 0,344 15,50 0,610

18,00 0,709 16,50 0,650

EXTENDED SHORT BODY SOLDER LUG/FASTONS 2,8x0,5[0.11x0.019] M8x0,75



20,00 0,787 18,50 0,728

M8x0,75



0,50 0,020 1,25 0,049 1,25 0,049

9,50 0,374

 3,00 0,118 8,75 0,344 13,50 0,531

3,00 0,118 8,75 0,344 25,50 1,004

REAR EPOXY WIRES

REAR EPOXY PINS

M8x0,75

8,00 ,315 6,50 0,256

0,50 0,020 1,25 0,049 1,25 0,049

3,00 0,118 8,75 0,344

M8x0,75

9,50 0,374

10,00 0,394 9,35 0,368

9,50 0,374

 3,00 0,118 8,75 0,344

WIRES



M8x0,75



2,8x0,8[0,11X0,393]

0,50 0,020 1,25 0,049 1,25 0,049

M8x0,75

PINS 9,40 0,370

9,40 ,370

SOLDER LUG/FASTONS

3,00 0,118 8,75 0,344 15,50 0,610

10,00 0,394 9,35 0,368

www.apem.com

3,00 0,118 8,75 0,344 18,50 0,728

10,00 0,394 9,35 0,368

APEM

Q SERIES Ø8mm (.315") Panel Mount LED Indicators

Technical Drawings

FLUSH BEZEL

33,85 1,333

1,00 0,039 8,75 0,344

9,50 0,374

 1,00 0,039 8,75 0,344 15,60 0,614

200,0+/-10 [7,874+/-0,393]

9,50 0,374

SHORT BODY SOLDER LUG/FASTONS M8x0,75

2,8x0,8[0,11x0,031]

200,0+/-10 [7,874+/-0,393]

1,00 0,039 8,75 0,344 17,60 0,693

M8x0,75

18,00 0,709 16,50 0,650

EXTENDED SHORT BODY SOLDER LUG/FASTONS 2,8x0,5[0.11x0.019] M8X0,75







M8x0,75

SHORT BODY PINS 9,50 0,374

9,50 0,374

M8x0,75

SHORT BODY WIRES 9,50 0,374

27,60 1,087

9,50 0,374

20,00 0,787 18,50 0,728

200,0 +/-10 [7.874+/-0,393]

REAR EPOXY WIRES



0,50 0,020 1,25 0,049 1,25 0,049

9,50 0,374



M8x0,75

1,00 0,039 8,75 0,344 15,60 0,614

APEM

1,00 0,039 8,75 0,344

27,60 1,087

REAR EPOXY PINS

1,00 0,039 8,75 0,344 17,60 0,693

8,00 0,315 6,50 0,256

0,50 0,020

10,00 0,394 9,35 0,368

1,25 0,049 1,25 0,049

1,00 0,039 8,75 0,344

M8x0,75





M8x0,75

0,50 0,020 1,25 0,049 1,25 0,049

2,8x0,8[0,11x0,031]

WIRES

PINS 9,50 0,374

M8x0,75



9,50 0,374

SOLDER LUG/FASTONS

1,00 0,039 8,75 0,344 17,60 0,693

10,00 0,394 9,35 0,368

www.apem.com

1,00 0,039 9,75 0,384 21,60 0,850

10,00 0,394 9,35 0,368

Q SERIES Ø8mm (.315") Panel Mount LED Indicators Overview

STANDARD OPTIONS The Q8 Series is available with a range of standard options, to specify your LED, simply choose one option from each column. An example is shown below.

Q

8

P

8

G

XX

Y

12

E

SERIES

MOUNTING HOLE

BEZEL STYLE

TERMINALS

BEZEL FINISH

TYPE OF ILLUMINATION

LED COLOR

VOLTAGE

SEALING

Q

8 = Ø8mm

1 = Solder Lug/ Fastons (2.8 x 0.8)

C = Bright Chrome

XX = Fixed Light

R = Red

02 = no resistor*

(Blank) = Unsealed

R = Recessed

B = Black Chrome

G = Green

06 = 6VDC

E = IP67

F = Flush

2 = Pins

G = Satin Grey

KK = Flashing Light (12V – 28VDC) YY = Bi-color

B = Blue

ZZ = Tri-color

W = White

P = Prominent

3 = Wires 4 = Rear epoxy Pins

Y = Yellow

O = Orange

5 = Rear epoxy Wires

12 = 12VDC 12A = 12VAC/DC 24 = 24VDC 24A = 24VAC/DC

HR = Hyper Bright Red

28 = 28VDC

HG = Hyper Bright Green

28A = 28VAC/DC

HY = Hyper Bright Yellow

7 = Short body Wires

110 = 110VAC

HO = Hyper Bright Orange

220 = 220VAC

8 = Short body Lug/ Fastons (2.8 x 0.8)

SR = Super Bright Red

6 = Short body Pins

SG = Super Bright Green

9 = Extended short body solder Lug/ Fastons (2.8 x 0.5)

SY = Super Bright Yellow SB = Super Bright Blue SW = Super Bright White SO = Super Bright Orange RG = Red/Green

Example Q8P3CXXY02E Ø8mm, prominent bezel, 200mm wire termination bright chrome finish, fixed light, yellow 2VDC LED, IP67 panel sealed

RY = Red/Yellow GY = Green/Yellow

RYG = Red/Yellow/Green

• Gold Faston terminal denotes Anode (+), silver terminal denotes Cathode (-) • Standard wire length is 200mm, 24AWG UL1061, red wire denotes Anode (+), black wire denotes Cathode (-) for other wire lengths consult APEM • For LEDs with alternative voltages consult APEM • Bi-color LEDs, by connecting the gold Faston (+) one color is produced, by reversing the supply voltage another color is produced – Bi-colors are available up to 28VDC. [AC products not available] • Take care when soldering to the Faston terminals (recommended solder temperature 300°C - 3 sec) • Terminal options 6,7 & 9 are only available up to 28V (DC Only) tri-color not available with terminal 9 • Terminal code 8 is only available without integral resistor • Maximum panel thickness 7mm • We recommend using Hyperbright orSuperbright LEDs for use at 110VAC and 220VAC • The Tri-color LED has red and green LEDs when both are connected yellow is produced • Standard Tri-color Faston terminals are two Anodes (+) and one Cathode (-) • Tri-color wires are one red (+) and one green (+) Anode and one black (-) Cathode • Tri-color pins are center (–) Cathode, shortest (+) Anode pin green, longest (+) Anode pin red * = For resistorless versions (02) please refer to the forward voltage

www.apem.com

APEM

Q12 SERIES

Ă˜12mm (.472") Panel Mount LED Indicators

Distinctive features Panel mount LED indicators with 8mm colored diffused epoxy lens or 8mm water clear super bright LEDs. Bright chrome, black chrome or satin grey bezel finish.

Prominent bezel style. Voltage: 2VDC - 220VAC. Terminals: 2.8 x 0.8 solder lug/faston, pins or 200mm long wires.

IP67 sealing option (EN60529). Supplied with fixing nut and spring washer.

Typical Applications Process Controls Professional Electrical Appliances Communications, Radar Civil engineering vehicles, trucks, diggers, crane Trains HVAC, Energy Management Lifts Machine Tools APEM

www.apem.com

13

Q SERIES Ø12mm (.472") Panel Mount LED Indicators Distinctive features and specification

VOYC1603R1US

Features • 12mm panel mounting LED indicator • 8mm colored diffused epoxy lens or 8mm water clear super bright LEDs • Plated brass bezel finished in bright chrome, black chrome or satin grey and moulded polycarbonate rear body • • • • •

Prominent bezel style 2VDC – 220VAC (2.8 x 0.8) solder lug/faston terminals, pins or (200mm long) wire terminations IP67 sealing option (EN60529) Supplied with fixing nut and spring washer

NB: UL Recognized Component TECHNICAL SPECIFICATIONS Voltage 02 (No Resistor) 6VDC 12VDC 24VDC 28VDC 110VAC 220VAC

Operating Voltage (Min to Max) 1.8 to 3.3VDC 5.4 to 6.6VDC 10.8 to 13.2VDC 21.6 to 26.4VDC 25.2 to 30.8VDC 99 to 121VAC 207 to 253VAC

Operating Current (Typical All Types) 20mA max* 20mA 20mA 20mA 20mA 6mA 3mA

Max Reverse Voltage: 5V Viewing Angle: 30–100° (dependant on model) Life Expectancy: 100,000 hours Temperature Range: –40 to +85°C (operating & storage) Torque: 75cNm Ø 12.00 +0.15/-0.0 15,00 0,591

PANEL CUTOUT

AF

2,00 0,079

M12 x 0,75 THREAD

Standard LED Intensity Prominent Forward Voltage HE Red 350mcd 2.0V Green 60mcd 2.2V Yellow 50mcd 2.1V Blue 800mcd 3.3V White 1,200mcd 3.3V Orange 100mcd 2.0V Bi-color (Typical) (Red/Green) 20/10mcd 2.0V/2.2V Tri-color (Typical) (Red/Green/Yellow) 80/15/13mcd 2.0V/2.2V/2.1V Bi-color - The color is changed by reversing the polarity of the supply voltage.

Tri-color - The indicator has red and green LEDs, when both connected yellow is produced.

Super Bright LED HE Red Green Yellow Blue White Orange

Prominent 3,000mcd 8,000mcd 1,100mcd 1,500mcd 1,200mcd 2,000mcd

Forward Voltage 2.2V 3.3V 2.3V 3.3V 3.3V 2.2V

Hyper Bright LED HE Red Green Yellow Orange

Prominent 1,200mcd 2,200mcd 1,600mcd 4,300mcd

Forward Voltage 2.0V 3.3V 2.0V 2.2V

Luminous intensity will be reduced with lower operating current.

Note: The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy.

The company reserves the right to change specifications without notice. * Customer to supply resistor for desired operating current.

Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated.

Luminous intensities and color shades of white LEDs may vary within a batch.

APEM

www.apem.com

1

Q SERIES Ø12mm (.472") Panel Mount LED Indicators

Technical Drawings

WIRES 13,50 0,531

REAR EPOXY PINS



13,50 0,531

M12x0,75

200,0+/-10 [7,874+/-0,393]

2

200,0+/-10 [7,874+/-0,393]

4,50 0,177 8,75 0,344 16,00 0,630

17,50 0,689 16,00 0,630

www.apem.com

M12x0,75

20,00 0,787 18,50 0,728

13,50 0,531

SHORT BODY WIRES M12x0,75



0,50 0,020 1,25 0,001 1,25 0,049

13,50 0,531

M12x0,75

 4,50 0,177 8,75 0,344 13,50 0,531

4,50 0,177 8,75 0,344 13,50 0,531

SHORT BODY PINS



13,50 0,531

27,50 1,083

M12x0,75

6,00 0,236 4,50 0,177 27,50 1,083

27,50 1,083

REAR EPOXY WIRES

0,50 0,020 2,00 [0,078] 2,00 [0,078]

13,50 0,531 4,50 0,177 8,75 0,344

6,00 0,236 4,50 0,177

4,50 0,177 8,75 0,344

M12x0,75

0,50 0,020 1,25 0,049 1,25 0,049

4,50 0,177 8,75 0,344

PINS



M12x0,75

0,50 0,020 2,00 [0,078] 2,00 [0,078]

13,50 0,531

SOLDER LUG/FASTONS



PROMINENT BEZEL

4,50 0,177 8,75 0,344 16,00 [0,629]

200,0+/-10 [7,874+/-0,393]

APEM

Q SERIES Ø12mm (.472") Panel Mount LED Indicators Overview

STANDARD OPTIONS The Q12 Series is available with a range of standard options, to specify your LED, simply choose one option from each column. An example is shown below.

Q

12

P

1

B

XX

G

12

E

SERIES

MOUNTING HOLE

BEZEL STYLE

TERMINALS

BEZEL FINISH

TYPE OF ILLUMINATION

LED COLOR

VOLTAGE

SEALING

1 = Solder Lug/ Fastons (2.8 x 0.8)

C = Bright Chrome

XX = Fixed Light

R = Red

02 = no resistor*

(Blank) = Unsealed

B = Black Chrome

G = Green

06 = 6VDC

E = IP67

2 = Pins

G = Satin Grey

KK = Flashing Light (12 - 28VDC)

Y = Yellow

12 = 12VDC

B = Blue

12A = 12VAC/DC

W = White

24 = 24VDC

O = Orange

24A = 24VAC/DC

Q

12 = Ø12mm

P = Prominent

3 = Wires 4 = Rear epoxy Pins

YY = Bi-color ZZ = Tri-color

5 = Rear epoxy Wires

28 = 28VDC

6 = Short body Pins 7 = Short body Wires

HR = Hyper Bright Red

28A = 28VAC/DC

HG = Hyper Bright Green

110 = 110VAC

HY = Hyper Bright Yellow

220 = 220VAC

HO = Hyper Bright Orange

SR = Super Bright Red SG = Super Bright Green SY = Super Bright Yellow SB = Super Bright Blue

Example Q12P7GXXG12E Ø12mm, prominent bezel, short body wires, satin chrome finish, fixed light, green, 12VDC LED, IP67 panel sealed

SW = Super Bright White SO = Super Bright Orange

RG = Red/Green RY = Red/Yellow GY = Green/Yellow

RYG = Red/Yellow/Green

• Gold Faston terminal denotes Anode (+), silver terminal denotes Cathode (-) • Standard wire length is 200mm, 24AWG UL1061, red wire denotes Anode (+), black wire denotes Cathode (-) for other wire lengths consult APEM • For LEDs with alternative voltage consult APEM • Bi-color LEDs, by connecting the gold Faston (+) one color is produced, by reversing the supply voltage another color is produced – Bi-colors are available up to 28VDC • Take care when soldering to the Faston terminals (recommended solder temperature 300°C - 3 sec) • Max voltage for pins and wires is 28V • Maximum panel thickness 7mm • Tri-colors are only available behind panel epoxy sealed with wires (option 1) or pins (option 3) • 110VAC and 220VAC only available with solder lug/Faston terminals • We recommend using Hyperbright or Superbright LEDs for use at 110VAC and 220VAC • The Tri-color LED has red and green LEDs when both are connected yellow is produced • Standard Tri-color Faston terminals are two Anodes (+) and one Cathode (-) • Tri-color wires are one red (+) and one green (+) Anode and one black (-) Cathode • Tri-color pins are center (–) Cathode, shortest (+) Anode pin green, longest (+) Anode pin red * = For resistorless versions (02) please refer to the forward voltage 3

www.apem.com

APEM

Q14 SERIES

Ă˜14mm (.551") Panel Mount LED Indicators

Distinctive features Panel mount LED indicators with 10mm colored diffused epoxy lens or 10mm water clear super bright LEDs. Custom engraving available Bright chrome, black chrome or satin grey bezel finish.

Prominent and flush bezel styles. voltage: 2VDC - 220VAC. Terminals: 2.8 x 0.8 solder lug/fastons, pins or 200mm long wires.

IP67 sealing option (EN60529). Supplied with fixing nut and spring washer.

Typical Applications Process Controls Professional Electrical Appliances Communications, Radar Civil engineering vehicles, trucks, diggers, crane Trains HVAC, Energy Management Lifts Machine Tools APEM

www.apem.com

17

Q SERIES Ø14mm (.551") Panel Mount LED Indicators Distinctive features and specification

VOYC1603R1US

Features • 14mm panel mounting LED indicator • 10mm colored diffused epoxy lens or 10mm water clear super bright LEDs • Plated brass bezel finished in bright chrome, black chrome or satin grey and moulded polycarbonate rear body • Prominent and flush bezel styles • Custom engraving available • 2VDC – 220VAC • (2.8 x 0.8) solder lug/Faston terminals, pins or (200mm long) wire terminations • IP67 sealing option (EN60529) • Supplied with fixing nut and spring washer NB: UL Recognized Component TECHNICAL SPECIFICATIONS Voltage 02 (No Resistor) 6VDC 12VDC 24VDC 28VDC 110VAC 220VAC

Operating Voltage (Min to Max) 1.8 to 3.3VDC 5.4 to 6.6VDC 10.8 to 13.2VDC 21.6 to 26.4VDC 25.2 to 30.8VDC 99 to 121VAC 207 to 253VAC

Operating Current (Typical All Types) 20mA max* 20mA 20mA 20mA 20mA 6mA 3mA

Max Reverse Voltage: 5V Viewing Angle: 30–100° (dependant on model) Life Expectancy: 100,000 hours Temperature Range: –40 to +85°C (operating & storage) Torque: 75cNm Ø 14.00 +0.15/-0.0

17,00 0,669

AF

3,00 0,118

PANEL CUTOUT M14 x 1,0 THREAD

Standard LED Intensity Prominent Flush Forward Voltage HE Red 80mcd 10mcd 2.0V Green 60mcd 5mcd 2.2V Yellow 50mcd 4mcd 2.1V Blue 540mcd 100mcd 3.3V White 1000mcd 150mcd 3.3V Orange 80mcd 200mcd 2.0V Bi-color (Typical) (Red/Green) 15/15mcd 14/10mcd 2.0V/2.2V Tri-color (Typical) (Red/Green/Yellow) 60/50/50mcd 15/10/30mcd 2.0V/2.2V/2.1V Bi-color - The color is changed by reversing the polarity of the supply voltage.

Tri-color - The indicator has red and green LEDs, when both connected yellow is produced.

Super Bright LED HE Red Green Yellow Blue White Orange

Prominent 17,000mcd 11,000mcd 4,000mcd 2,500mcd 4,400mcd 2800mcd

Flush 2,000mcd 680mcd 350mcd 250mcd 250mcd 300mcd

Forward Voltage 2.2V 3.5V 2.3V 3.3V 3.3V 2.1V

Hyper Bright LED HE Red Green Yellow Orange

Prominent 2,800mcd 2,200mcd 1,300mcd 850mcd

Flush 800mcd 250mcd 250mcd 200mcd

Forward Voltage 2.1V 3.2V 2.0V 2.1V

Luminous intensity will be reduced with lower operating current.

Note: The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy.

The company reserves the right to change specifications without notice. * Customer to supply resistor for desired operating current.

Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated.

Luminous intensities and color shades of white LEDs may vary within a batch.

APEM

www.apem.com

Q SERIES Ø14mm (.551") Panel Mount LED Indicators

Technical Drawings

PINS

2,8x0,8[0,11x0,031]



4,75 0,187 13,50 0,531

10,00 0,394 9,35 0,368

4,75 0,187 13,50 0,531

33,75 1,329



0,50 0,020 1,25 0,049 1,25 0,049 7,00 0,276 5,50 0,217

0,50 0,020 1,25 0,049 1,25 0,049

REAR EPOXY PINS M14x1,0

16,00 0,630





M14x1,0

16,00 0,630

16,00 0,630

1,50 0,059 13,50[0,531] 29,10 1,146

WIRES

0,50 0,020 1,25 0,049 1,25 0,049

 1,50 0,059 13,50[0,531] 20,10 0,791

16,00 ,630 14,50 0,571

www.apem.com

16,00 0,630

SHORT BODY PINS

1,50 0,059 13,50[0,531] 17,85 0,703

18,25 0,719 16,75 0,659

SHORT BODY WIRES M14x1,0



200,0+/-10 [7,874+/-0,393]

16,00 0,630

16,00 0,630



M14x1,0

 10,00 0,394 9,35 0,368

29,10 1,146

200,0+/-10 [7,874+/-0,393]

PINS 16,00 0,630

16,00 0,630

2,8x0,8[0,11x0,031]



M14x1,0

1,50 0,059 13,50[0,531]

1,50 0,059 13,50[0,531] 17,85 0,703

200,0+/-10 [7,874+/-0,393]

SOLDER LUG/FASTONS

34,10 1,343

M14x1,0

M14x1,0

4,75 0,187 13,50 0,531 19,75 0,778

16,00 0,630 14,50 0,571

1,50 0,059 13,5[0,531]

REAR EPOXY WIRES

SHORT BODY WIRES



 4,75 0,187 13,50 0,531 19,75 0,778

0,50 0,020 1,25 0,049 1,25 0,049

16,00 0,630

16,00 0,630

M14x1,0

18,25 0,719 16,75 0,659

4,75 0,187 13,50 0,531 17,50 0,689

SHORT BODY PINS



FLUSH BEZEL

M14x1,0

0,50 0,020 1,25 0,049 1,25 0,049

16,00 0,630

16,00 0,630



200,0+/-10 [7,874+/-0,393]

REAR EPOXY WIRES

200,0+/-10 [7,874+/-0,393]

REAR EPOXY PINS

WIRES

28,75 1,132

4,75 0,187 13,50 0,532 17,50 0,689

7,00 0,276 5,50 0,217 28,75 1,132

M14x1,0

4,75 0,187 13,50 0,531

M14x1,0

M14x1,0

0,50 0,020 1,25 0,049 1,25 0,049

M14x1,0

16,00 0,630

16,00 0,630

SOLDER LUG/FASTONS



PROMINENT BEZEL

1,50 0,059 13,50[0,531] 20,10 0,791

200,0+/-10 [7,874+/-0,393]

APEM

Q SERIES Ă˜14mm (.551") Panel Mount LED Indicators Custom options

Cable length & connector

CUSTOM ENGRAVING

For custom cable length and connectors please contact APEM

Suffix the part number with legend code (see example on page 4) Code Symbol Description Code Symbol Description

Code

Symbol

Description

-0AJ

High Beam

-041

Horn

-0EL

Engine Coil

-097

Low Beam

-013

Hazard Warning

-0SB

Seat Belt

-027

Rear Fog

-018

Heating

-0UB

USB Connection

-026

Front Fog

-0BU

Brake Test

-0ST

Steam

-021

Windscreen Wiper

-0K6

Arrow

-0EU

-022

Windscreen Washer

-0AG

Battery

-0AD

Side Step

-023

Ventilator Fan

-0GP

Oil Can

-012

Air Con

-0AH

Turn Signal

-020

Windscreen Heating

-040

Engine

-098

Side Lights

-086

ABS

-0BR

Boot/Trunk Release

Some common codes are listed above, for your custom requirements please contact APEM. Unless specified standard engraving with white infill will be supplied.

APEM

www.apem.com

ECU

Q SERIES Ø14mm (.551") Panel Mount LED Indicators

Order Overview

STANDARD OPTIONS The Q14 Series is available with a range of standard options, to specify your LED, simply choose one option from each column. An example is shown below.

Q

14

P

1

C

XX

B

28

E

SERIES

MOUNTING HOLE

BEZEL STYLE

TERMINALS

BEZEL FINISH

TYPE OF ILLUMINATION

LED COLOR

VOLTAGE

SEALING

1 = Solder Lug/ Fastons (2.8 x 0.8)

C = Bright Chrome

XX = Fixed Light

R = Red

02 = no resistor*

(Blank) = Unsealed

B = Black Chrome

G = Green

06 = 6VDC

E = IP67

2 = Pins

G = Satin Grey

KK = Flashing Light (12- 28VDC)

Y = Yellow

12 = 12VDC

B = Blue

12A = 12VAC/DC

W = White

24 = 24VDC

O = Orange

24A = 24VAC/DC

Q

14 = Ø14mm

P = Prominent F = Flush

3 = Wires

YY = Bi-color ZZ = Tri-color

4 = Rear epoxy Pins 5 = Rear epoxy Wires

28 = 28VDC

6 = Short body Pins 7 = Short body Wires

HR = Hyper Bright Red

28A = 28VAC/DC

HG = Hyper Bright Green

110 = 110VAC

HY = Hyper Bright Yellow

220 = 220VAC

HO = Hyper Bright Orange

SR = Super Bright Red SG = Super Bright Green

Example Q14F3CXXR12E-0SB Ø14mm, Flush bezel, wire termination, red LED bright chrome finish, fixed light, 12VDC LED, IP67 panel sealed, engraved with seat belt symbol (see page 3)

SY = Super Bright Yellow SB = Super Bright Blue SW = Super Bright White

RG = Red/Green RY = Red/Yellow GY = Green/Yellow

RYG = Red/Yellow/Green

• Gold Faston terminal denotes Anode (+), silver terminal denotes Cathode (-) • Standard wire length is 200mm, 22AWG UL1007, red wire denotes Anode (+), black wire denotes Cathode (-) for other wire lengths consult APEM • For LEDs with alternative voltages consult APEM • Bi-color LEDs, by connecting the gold Faston (+) one color is produced, by reversing the supply voltage another color is produced – Bi-colors are available up to 28VDC • Take care when soldering to the Faston terminals (recommended solder temperature 300°C - 3 sec) • Short body pins and wires are only available up to 28VDC • The Tri-color LED has red and green LEDs when both are connected yellow is produced • Standard Tri-color Faston terminals are two Anodes (+) and one Cathode (-) • Tri-color wires are one red (+) and one green (+) Anode and one black (-) Cathode • Tri-color pins are center (–) Cathode, shortest (+) Anode pin green, longest (+) anode pin red • Maximum panel thickness 11mm • We recommend using Hyperbright or Superbright LEDs for use at 110VAC and 220VAC • For multi-voltage options please consult APEM

* = For resistorless versions (02) please refer to the forward voltage www.apem.com

Q16 SERIES

Ă˜16mm (.630") Panel Mount LED Indicators

Distinctive features Panel mount LED indicators with 10mm colored diffused epoxy lens or 10mm water clear super bright LEDs. Custom engraving and secret until lit polycarbonate decals available Bright chrome, black chrome or satin grey bezel finish.

Prominent and flush bezel styles. voltage: 2VDC - 220VAC. Terminals: 2.8 x 0.8 solder lug/fastons, pins or 200mm long wires.

IP67 sealing option (EN60529). Supplied with fixing nut and spring washer.

Typical Applications Process Controls Professional Electrical Appliances Communications, Radar Civil engineering vehicles, trucks, diggers, crane Trains HVAC, Energy Management Lifts Machine Tools APEM

www.apem.com

22

Q SERIES Ø16mm (.630") Panel Mount LED Indicators Distinctive features and specification

VOYC1603R1US

Features • 16mm panel mounting LED indicator • 10mm colored diffused epoxy lens or 10mm water clear super bright LEDs • Plated brass bezel finished in bright chrome, black chrome or satin grey and moulded polycarbonate rear body • Secret until lit polycarbonate decals or custom engraving • Prominent and flush bezel styles • 2VDC – 220VAC • (2.8 x 0.8) solder lug/faston terminals, pins or (200mm long) wire terminations • IP67 sealing option (EN60529) • Supplied with fixing nut and spring washer NB: UL Recognized Component TECHNICAL SPECIFICATIONS Voltage 02 (No Resistor) 6VDC 12VDC 24VDC 28VDC 110VAC 220VAC

Operating Voltage (Min to Max) 1.8 to 3.3VDC 5.4 to 6.6VDC 10.8 to 13.2VDC 21.6 to 26.4VDC 25.2 to 30.8VDC 99 to 121VAC 207 to 253VAC

Operating Current (Typical All Types) 20mA max* 20mA 20mA 20mA 20mA 6mA 3mA

Max Reverse Voltage: 5V Viewing Angle: 30–100° (dependant on model) Life Expectancy: 100,000 hours Temperature Range: –40 to +85°C (operating & storage) Torque: 75cNm Ø 16.00 +0.15/-0.0

19,00 0,748

AF

2,40 0,094

PANEL CUTOUT M16 x 1,0 THREAD

Standard LED Intensity Prominent Flush Forward Voltage HE Red 80mcd 10mcd 2.0V Green 60mcd 5mcd 2.2V Yellow 50mcd 4mcd 2.1V Blue 540mcd 100mcd 3.3V White 1000mcd 150mcd 3.3V Orange 80mcd 200mcd 2.0V Bi-color (Typical) (Red/Green) 15/15mcd 10/10mcd 2.0V/2.2V Tri-color (Typical) (Red/Green/Yellow) 60/50/50mcd 15/30/30mcd 2.0V/2.2V/2.1V Bi-color - The color is changed by reversing the polarity of the supply voltage.

Tri-color - The indicator has red and green LEDs, when both connected yellow is produced.

Super Bright LED HE Red Green Yellow Blue White Orange

Prominent 17,000mcd 11,000mcd 4,000mcd 2,500mcd 4,400mcd 2,800mcd

Flush 2000mcd 680mcd 350mcd 250mcd 250mcd 300mcd

Forward Voltage 2.2V 3.5V 2.3V 3.3V 3.3V 2.1V

Hyper Bright LED HE Red Green Yellow Orange

Prominent 2,800mcd 2,200mcd 1,300mcd 850mcd

Flush 800mcd 250mcd 250mcd 200mcd

Forward Voltage 2.1V 3.2V 2.0V 2.1V

Luminous intensity will be reduced with lower operating current.

Note: The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy.

The company reserves the right to change specifications without notice. * Customer to supply resistor for desired operating current.

Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated.

Luminous intensities and color shades of white LEDs may vary within a batch.

APEM

www.apem.com

Q SERIES Ø16mm (.630") Panel Mount LED Indicators

Technical Drawings

PROMINENT BEZEL

PINS M16x1,0





18,30 0,720

18,30 0,720

2,8x0,8[0,11x0,031]

0,50 0,020 1,25 0,049 1,25 0,049

SOLDER LUG/FASTONS M16x1,0

4,75 0,187 13,50 0,531

10,00 0,394 9,35 0,368

4,75 0,187 13,50 0,531

7,00 0,276 5,50 ,217 28,75 1,132

33,75 1,329

REAR EPOXY PINS

WIRES

0,50 0,020 1,25 0,049 1,25 0,049

M16x1,0





18,30 0,720

18,30 0,720

M16x1,0

4,75 0,187 13,50 0,531

200,0+/-10 [7,874+/-0,393]

SHORT BODY PINS



4,75 0,187 13,50 0,531 19,75 0,778

16,00 0,630 14,50 0,571

FLUSH BEZEL

SOLDER LUG/FASTONS 2,8x0,8[0,11x0,031]

10,00 0,394 9,35 0,368 33,60 1,323

7,00 0,276 5,50 0,217

REAR EPOXY PINS

WIRES





18,30 0,720

18,30 0,720

M16x1,0

200,0+/-10 [7,874+/-0,393]

2,00 0,079 13,50[0531] 28,60 1,126

2,00 0,079 13,50[0,531] 17,35 0,683

SHORT BODY PINS

SHORT BODY WIRES M16x1,0





18,30 0,720

M16x1,0

18,25 0,719 16,75 0,659

18,30 0,720

M16x1,0

0,50 0,020 1,25 0,049 1,25 0,049

REAR EPOXY WIRES

18,30 0,720

2,00 0,079 13,50[0,531] 28,60 1,126

M16x1,0



PINS



 2,00 0,079 13,50[0,531]

200,0+/-10 [7,874+/-0,393]

M16x1,0 18,30 0,720

18,30 0,720

M16x1,0

2,00 0,079 13,50[0,531] 17,35 0,683

200,0+/-10 [7,874+/-0,393]

4,75 0,187 13,50 0,531 19,75 19,750

0,50 0,020 1,25 0,049 1,25 0,049

200,0+/-10 [7,874+/-0,393]

4,75 0,187 13,50 0,531 17,50 0,689

0,50 0,020 1,25 0,049 1,25 0,049





18,30 0,720

18,30 0,720

M16x1,0

SHORT BODY WIRES M16x1,0 18,30 0,720

M16x1,0

0,50 0,020 1,25 0,049 1,25 0,049

REAR EPOXY WIRES

18,25 0,719 16,75 0,659

4,75 0,187 13,50 0,531 17,50 0,689

28,75 1,132

2,00 0,079 13,50[0,531] 19,60 0,772

16,00 0,630 14,50 1,450

www.apem.com

2,00 0,079 13,50[0,531] 19,60 0,772

200,0+/-10 [7,874+/-0,393]

APEM

Q SERIES Ă˜16mm (.630") Panel Mount LED Indicators Custom options

Secret Until Lit Polycarbonate Inserts

Off

On

Suffix the part number with legend code (see example on page 5) Code Symbol Code Symbol Description

Description

-3AH

Turn Signal

-3PB

-313

Hazard

-398

Side Lights

-3GP

Oil can

-3SB

Seat Belt

-3AG

Battery

-3TP

Tyre Pressure

-327

Rear fog

-3CE

-397

Low beam

-3EC

Engine Temperature

-3BU

Brake test

-3FP

Fuel

-3K6

Arrow

-3BF

-3AJ

High beam

Park Brake

Check Engine

Brake Failure

Some common codes are listed above, for your custom requirements please contact APEM.

APEM

www.apem.com

Q SERIES Ă˜16mm (.630") Panel Mount LED Indicators

Custom options

Custom Engraving

Cable length & connector

For custom cable length and connectors please contact APEM Suffix the part number with legend code (see example on page 5) Code Symbol Description Code Symbol Description

Code

Symbol

Description

-0AJ

High Beam

-041

Horn

-0EL

Engine Coil

-097

Low Beam

-013

Hazard Warning

-0SB

Seat Belt

-027

Rear Fog

-018

Heating

-0UB

USB Connection

-026

Front Fog

-0BU

Brake Test

-0ST

Steam

-021

Windscreen Wiper

-0K6

Arrow

-0EU

-022

Windscreen Washer

-0AG

Battery

-0AD

Side Step

-023

Ventilator Fan

-0GP

Oil Can

-012

Air Con

-0AH

Turn Signal

-020

Windscreen Heating

-040

Engine

-098

Side Lights

-086

ABS

-0BR

Boot/Trunk Release

ECU

Some common codes are listed above, for your custom requirements please contact APEM. Unless specified standard engraving with white infill will be supplied.

www.apem.com

APEM

Q SERIES Ø16mm (.630") Panel Mount LED Indicators Overview

STANDARD OPTIONS The Q16 Series is available with a range of standard options, to specify your LED, simply choose one option from each column. An example is shown below.

Q

16

F

1

G

XX

Y

24

E

SERIES

MOUNTING HOLE

BEZEL STYLE

TERMINALS

BEZEL FINISH

TYPE OF ILLUMINATION

LED COLOR

VOLTAGE

SEALING

P = Prominent

1 = Solder Lug/ Fastons (2.8 x 0.8)

C = Bright Chrome

F = Flush

2 = Pins

B = Black Chrome

3 = Wires

G = Satin Grey

Q

16 = Ø16mm

Metal

Plastic PP = Prominent FP = Flush

4 = Rear epoxy Pins 5 = Rear epoxy Wires 6 = Short body Pins 7 = Short body Wires

Metal

Plastic

XX = Fixed Light

R = Red

02 = no resistor*

(Blank) = Unsealed

KK = Flashing Light (12 - 28VDC)

G = Green

06 = 6VDC

E = IP67

Y = Yellow

12 = 12VDC

B = Blue

12A = 12VAC/DC

W = White

24 = 24VDC

O = Orange

24A = 24VAC/DC

YY = Bi-color ZZ = Tri-color

CP = Bright

28 = 28VDC

BP = Black GP = Satin Grey

HR = Hyper Bright Red

28A = 28VAC/DC

AU = Gold

HG = Hyper Bright Green

110 = 110VAC

HY = Hyper Bright Yellow

220 = 220VAC

HO = Hyper Bright Orange

SR = Super Bright Red SG = Super Bright Green SY = Super Bright Yellow

Example Q16F7BXXHR12E-3PB Ø16mm, flush metal bezel, wire terminals Matt black chrome finish, fixed light, Red, 12VDC LED, IP67 panel sealed Secret until lit Park Brake Symbol (see page 3)

SB = Super Bright Blue SW = Super Bright White

RG = Red/Green RY = Red/Yellow GY = Green/Yellow

RYG = Red/Yellow/Green

• Gold Faston terminal denotes Anode (+), silver terminal denotes Cathode (-) • Standard wire length is 200mm, 22AWG UL1007, red wire denotes Anode (+), black wire denotes Cathode (-) for other wire lengths consult APEM • For LEDs with alternative voltages consult APEM • Bi-color LEDs, by connecting the gold Faston (+) one color is produced, by reversing the supply voltage another color is produced – Bi-colors are available up to 28VDC • Take care when soldering to the Faston terminals (recommended solder temperature 300°C - 3 sec) • Short body pins and wires are only available up to 28VDC • The Tri-color LED has red and green LEDs when both are connected yellow is produced • Standard Tri-color Faston terminals are two Anodes (+) and one Cathode (-) • Tri-color wires are one red (+) and one green (+) Anode and one black (-) Cathode • Tri-color pins are center (–) Cathode, shortest (+) Anode pin green, longest (+) Anode pin red • Maximum panel thickness 11mm • We recommend using Hyperbright or Superbright LEDs for use at 110VAC and 220VAC • For multi-voltage options please consult APEM * = For resistorless versions (02) please refer to the forward voltage

APEM

www.apem.com

Q19 SERIES

Ă˜19mm (.748") Panel Mount LED Indicators

Distinctive features Panel mount LED indicators with 10mm colored diffused epoxy lens or 10mm water clear super bright LEDs. Bright chrome, black chrome or satin grey bezel finish.

Prominent and flush bezel styles. voltage: 2VDC - 220VAC. Terminals: 2.8 x 0.8 solder lug/fastons, pins or 200mm long wires.

IP67 sealing option (EN60529). Supplied with fixing nut and spring washer.

Typical Applications Process Controls Professional Electrical Appliances Communications, Radar Civil engineering vehicles, trucks, diggers, crane Trains HVAC, Energy Management Lifts Machine Tools APEM

www.apem.com

28

Q SERIES Ø19mm (.748") Panel Mount LED Indicators Distinctive features and specification

VOYC1603R1US

Features • 19mm panel mounting LED indicator • 10mm colored diffused epoxy lens or 10mm water clear super bright LEDs • Plated brass bezel finished in bright chrome, black chrome or satin grey and moulded polycarbonate rear body • • • •

Prominent and flush bezel styles Custom engraving available 2VDC – 220VAC (2.8 x 0.8) solder lug/faston terminals, pins or (200mm long) wire terminations IP67 sealing option (EN60529) • Supplied with fixing nut and spring washer

NB: UL Recognized Component TECHNICAL SPECIFICATIONS Voltage 02 (No Resistor) 6VDC 12VDC 24VDC 28VDC 110VAC 220VAC

Operating Voltage (Min to Max) 1.8 to 3.3VDC 5.4 to 6.6VDC 10.8 to 13.2VDC 21.6 to 26.4VDC 25.2 to 30.8VDC 99 to 121VAC 207 to 253VAC

Operating Current (Typical All Types) 20mA max* 20mA 20mA 20mA 20mA 6mA 3mA

Max Reverse Voltage: 5V Viewing Angle: 30–100° (dependant on model) Life Expectancy: 100,000 hours Temperature Range: –40 to +85°C (operating & storage) Torque: 75cNm Ø 19.00 +0.15/-0.0 22,00 0,866

PANEL CUTOUT

AF

M19 x 1,0 THREAD

Flush Standard LED Intensity Prominent Forward Voltage HE Red 80mcd 2.0V 10mcd Green 60mcd 2.2V 5mcd 4mcd Yellow 50mcd 2.1V 100mcd Blue 540mcd 3.3V 150mcd White 1000mcd 3.3V Orange 80mcd 2.0V 200mcd Bi-color (Typical) (Red/Green) 15/15mcd 2.0V/2.2V 14/10mcd Tri-color (Typical) (Red/Green/Yellow) 60/50/50mcd 2.0V/2.2V/2.1V 15/10/30mcd Bi-color - The color is changed by reversing the polarity of the supply voltage.

Tri-color - The indicator has red and green LEDs, when both connected yellow is produced.

Super Bright LED HE Red Green Yellow Blue White Orange

Prominent 17,000mcd 11,000mcd 4,000mcd 2,500mcd 4,400mcd 2,800mcd

Flush 2000mcd 680mcd 350mcd 250mcd 250mcd 300mcd

Forward Voltage 2.2V 3.5V 2.3V 3.3V 3.3V 2.1V

Hyper Bright LED HE Red Green Yellow Orange

Prominent 2,800mcd 2,200mcd 1,300mcd 850mcd

Flush 800mcd 250mcd 250mcd 200mcd

Forward Voltage 2.1V 3.2V 2.0V 2.1V

Luminous intensity will be reduced with lower operating current.

Note: The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy.

The company reserves the right to change specifications without notice. * Customer to supply resistor for desired operating current.

Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated.

Luminous intensities and color shades of white LEDs may vary within a batch.

APEM

www.apem.com

3,00 0,118

Q SERIES Ø19mm (.748") Panel Mount LED Indicators Technical Drawings

PROMINENT BEZEL

SOLDER LUG/FASTONS

PINS 0,50 ,020 1,25 0,001 1,25 0,049

M19x1,0





22,00 0,866

22,00 0,866

2,8x0,8[0,11x0,031]

4,75 0,187 13,50 0,531

10,00 0,394 9,35 0,368

4,75 0,187 13,50 0,531

33,75 1,329

7,00 0,276 5,50 0,217 28,75 1,132

WIRES





22,00 0,866

22,00 ,866

M19x1,0

200,0+/-10 [7,874+/-0,393]

4,75 0,187 13,50 0,531

SHORT BODY WIRES M19x1,0

22,00 0,866





22,00 0,866 4,75 0,187 13,50 0,531 19,75 0,778

FLUSH BEZEL

200,0+/-10 [7,874+/-0,393]

4,75 0,187 13,50 0,531 19,75 0,778

16,00 0,630 14,50 0,571

SOLDER LUG/FASTONS

PINS

M19x1,0





22,00 0,866

22,00 0,866

2,8x0,8[0,11x0,031]

0,50 ,020 1,25 0,049 1,25 0,049

1,85 0,073

10,00 0,394 9,35 0,368 33,75 1,329

7,00 0,276 5,50 0,217

13,50 0,531 28,75 1,132

WIRES

REAR EPOXY PINS

M19x1,0





22,00 0,866

22,00 ,866

M19x1,0

1,85 0,073 13,50 0,531

200,0+/-10 [7,874+/-0,393] 28,75 1,132

18,25 0,719 16,75 0,659

SHORT BODY WIRES M19x1,0





22,00 0,866

0,50 0,020

22,00 0,866

22,00 0,866



200,0+/-10 [7,874+/-0,393]

1,85 0,073 13,50 0,531 17,50 0,689

SHORT BODY PINS M19x1,0

1,25 0,049 1,25 0,049

REAR EPOXY WIRES M19x1,0

1,85 0,073 13,50 0,531 17,50 0,689

0,50 0,020 1,25 0,049

1,85 0,073 13,50 0,531

1,25 0,049

22,00 0,866

M19x1,0



200,0+/-10 [7,874+/-0,393]

16,75 0,659

SHORT BODY PINS

M19x1,0

0,50 0,020 1,25 0,049 1,25 0,049

REAR EPOXY WIRES

18,25 0,719

4,75 0,187 13,50 0,531 17,50 0,689

28,75 1,132

4,75 0,187 13,50 0,531 17,50 0,689

0,50 0,020 1,25 0,049 1,25 0,049

REAR EPOXY PINS

M19x1,0

1,85 0,073 13,50 0,531 19,75 0,778

14,50 0,571 16,00 0,630

www.apem.com

1,85 0,073 13,50 0,531 19,75 0,778

200,0+/-10 [7,874+/-0,393]

APEM

Q SERIES Ă˜19mm (.748") Panel Mount LED Indicators Custom options

Cable length & connector

CUSTOM ENGRAVING

For custom cable length and connectors please contact APEM

Suffix the part number with legend code Code Symbol Description Code

Symbol

Description

Code

Symbol

Description

-0AJ

High Beam

-041

Horn

-0EL

Engine Coil

-097

Low Beam

-013

Hazard Warning

-0SB

Seat Belt

-027

Rear Fog

-018

Heating

-0UB

USB Connection

-026

Front Fog

-0BU

Brake Test

-0ST

Steam

-021

Windscreen Wiper

-0K6

Arrow

-0EU

-022

Windscreen Washer

-0AG

Battery

-0AD

Side Step

-023

Ventilator Fan

-0GP

Oil Can

-012

Air Con

-0AH

Turn Signal

-020

Windscreen Heating

-040

Engine

-098

Side Lights

-086

ABS

-0BR

Boot/Trunk Release

Some common codes are listed above, for your custom requirements please contact APEM. Unless specified standard engraving with white infill will be supplied.

APEM

www.apem.com

ECU

Q SERIES Ø19mm (.748") Panel Mount LED Indicators Overview

STANDARD OPTIONS The Q19 Series is available with a range of standard options, to specify your LED, simply choose one option from each column. An example is shown below.

Q

19

P

1

B

XX

G

12

E

SERIES

MOUNTING HOLE

BEZEL STYLE

TERMINALS

BEZEL FINISH

TYPE OF ILLUMINATION

LED COLOR

VOLTAGE

SEALING

P = Prominent

1 = Solder Lug/ Fastons (2.8 x 0.8)

C = Bright Chrome

F = Flush

2 = Pins

B = Black Chrome

3 = Wires

G = Satin Grey

Q

19 = Ø19mm

Metal

Metal

4 = Rear epoxy Pins

XX = Fixed Light

R = Red

02 = no resistor*

(Blank) = Unsealed

KK = Flashing Light (12 - 28VDC)

G = Green

06 = 6VDC

E = IP67

Y = Yellow

12 = 12VDC

B = Blue

12A = 12VAC/DC

W = White

24 = 24VDC

O = Orange

24A = 24VAC/DC

YY = Bi-color ZZ = Tri-color

5 = Rear epoxy Wires

28 = 28VDC

6 = Short body Pins 7 = Short body Wires

HR = Hyper Bright Red

28A = 28VAC/DC

HG = Hyper Bright Green

110 = 110VAC

HY = Hyper Bright Yellow

220 = 220VAC

HO = Hyper Bright Orange

SR = Super Bright Red

Example Q19P1BXXR12E Ø19mm, prominent bezel, solder lug terminals, black chrome finish, fixed light, red, 12VDC LED, IP67 panel sealed

SG = Super Bright Green SY = Super Bright Yellow SB = Super Bright Blue SW = Super Bright White

RG = Red/Green RY = Red/Yellow GY = Green/Yellow

RYG = Red/Yellow/Green

• Gold Faston terminal denotes Anode (+), silver terminal denotes Cathode (-) • Standard wire length is 200mm, 22AWG UL1007, red wire denotes Anode (+), black wire denotes Cathode (-) for other wire lengths consult APEM • For LEDs with alternate voltages consult APEM • Bi-color LEDs, by connecting the gold Faston (+) one color is produced, by reversing the supply voltage another color is produced – Bi-colors are available up to 28VDC • Take care when soldering to the Faston terminals (recommended solder temperature 300°C - 3 sec) • Short body pins and wires are only available up to 28VDC • The Tri-color LED has red and green LEDs when both are connected yellow is produced • Standard Tri-color Faston terminals are two Anodes (+) and one Cathode (-) • Tri-color wires are one red (+) and one green (+) Anode and one black (-) Cathode • Tri-color pins are center (–) Cathode, shortest (+) Anode pin green, longest (+) Anode pin red • Maximum panel thickness 11mm • We recommend using Hyperbright orSuperbright LEDs for use at 110VAC and 220VAC • For multi-voltage options please consult APEM * = For resistorless versions (02) please refer to the forward voltage

www.apem.com

APEM

Q22 SERIES

Ă˜22mm (.866") Panel Mount LED Indicators

Distinctive features Panel mount LED indicators with 18mm colored diffused epoxy lens.

Custom engraving available.

Metal bezel finish: bright chrome, black chrome or satin grey.

Plastic bezel finished in black.

Prominent and flush bezel styles. Voltage: 5.5VDC - 220VAC. Terminals: 2.8 x 0.8 solder lug/fastons, pins or 200mm long wires.

IP67 sealing option (EN60529). Supplied with fixing nut and spring washer.

Typical Applications Process Controls Professional Electrical Appliances Communications, Radar Civil engineering vehicles, trucks, diggers, crane Trains HVAC, Energy Management Lifts Machine Tool APEM

www.apem.com

33

Q SERIES Ø22mm (.866") Panel Mount LED Indicators Distinctive features and specification

VOYC1603R2US

Features • 22mm panel mounting LED indicator • 18mm colored diffused epoxy lens or 18mm super bright LEDs • Plated brass bezel finished in bright chrome, black chrome or satin grey and moulded polycarbonate rear body • Black ABS Plastic bezel option • Prominent and flush bezel styles • Custom engraving available • (2.8 x 0.8) solder lug/faston terminals, pins or (200mm long) wire terminations • IP67 sealing option (EN60529) • Supplied with fixing nut and spring washer NB: UL Recognized Component TECHNICAL SPECIFICATIONS Voltage

05 (No Resistor) 12VDC 24VDC 28VDC 110VAC 220VAC

Operating Voltage (Min to Max) 3.3 to 9.9VDC 10.8 to 13.2VDC 21.6 to 26.4VDC 25.2 to 30.8VDC 99 to 121VAC 207 to 253VAC

Operating Current (Typical All Types) 40mA max* 40mA 40mA 40mA 5mA 3mA

Max Reverse Voltage: 5V Viewing Angle: 30–100° (dependant on model) Life Expectancy: 100,000 hours Temperature Range: –40 to +85°C (operating & storage) Torque: 100cNm Ø 22.00 +0.15/-0.0

PANEL CUTOUT

27,00 1,063

AF

3,25 0,128

M22 x 1,0 THREAD

Standard LED Intensity Prominent Flush Forward Voltage HE Red 82mcd 70mcd 5.7V Green 95mcd 66mcd 6.0V Yellow 60mcd 59mcd 5.9V Blue 120mcd 101mcd 9.9V White 1,000mcd 150mcd 3.3V Bi-color (Typical) (Red/Green) 80/50mcd 80/50mcd 2.0V/2.2V Tri-color (Typical) (Red/Green/Yellow) 80/50/50mcd 80/50/50mcd 2.0V/2.2V/2.1V Bi-color - The color is changed by reversing the polarity of the supply voltage.

Tri-color - The indicator has red and green LEDs, when both connected yellow is produced.

Super bright LED (Diffused) HE Red Green Yellow

Prominent 465mcd 245mcd 365mcd

Flush 800mcd 980mcd 1,250mcd

Luminous intensity will be reduced with lower operating current.

Note: The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy.

The company reserves the right to change specifications without notice. * Customer to supply resistor for desired operating current.

Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated.

Luminous intensities and color shades of white LEDs may vary within a batch.

APEM

www.apem.com

Forward Voltage 5.7V 9.0V 6.0V

Q SERIES Ø22mm (.866") Panel Mount LED Indicators Technical Drawings

SOLDER LUG/FASTONS

REAR EPOXY PINS M22x1,0





25,00 0,984

25,00 0,984

M22x1,0

0,70 ,028 1,25 0,049 1,25 0,049

PROMINENT BEZEL

10,00 0,394 8,65 0,341 35,00 1,378

6,50 0,256 14,25 0,561 18,00 0,709

19,00 0,748 16,00 0,630

REAR EPOXY WIRES

SHORT BODY PINS M22x1,0





25,00 0,984

25,00 0,984

M22x1,0

0,70 0,028 1,25 0,049 1,25 0,049

6,50 0,256 14,25 0,561

200,0+/-10 [7,874+/-0,393]

6,50 0,256 14,25 0,561 18,00 0,709

17,50 0,689 14,50 0,571

6,50 0,256 14,25 0,561 19,50 0,768

SHORT BODY WIRES



25,00 0,984

M22 x 1,0

200,0+/-10 [7,874+/-0,393]

6,50 0,256 14,25 0,561 20,00 0,787

REAR EPOXY PINS

SOLDER LUG/FASTONS M22x1,0

M22x1,0





25,00 0,984

25,00 0,984

2,8x0,8[0,11x0,031]

0,70 ,028 1,25 0,049 1,25 0,049

FLUSH BEZEL

10,00 0,394 9,35 0,368 39,00 1,535

2,50 0,098 4,75 0,187 22,00 0,866

19,00 0,748 16,00 0,630

SHORT BODY PINS

REAR EPOXY WIRES M22x1,0

0,70 0,028 1,25 0,049 1,25 0,049

2,50 0,098 11,75 0,463





25,00 0,984

25,00 0,984

M22x1,0

2,50 0,098 11,75 0,463 22,00 0,866

200,0+/-10 [7,874+/-0,393]

2,50 0,098 11,75 0,463

17,50 0,689 14,50 0,571 23,50 0,925

SHORT BODY WIRES



25,00 0,984

M22x1,0

200,0+/-10 [7,874+/-0,393]

2,50 0,098 11,75 0,463 24,00 0,945

www.apem.com

APEM

Q SERIES Ă˜22mm (.866") Panel Mount LED Indicators Custom Options

Custom Engraving

Cable length & connector

For custom cable length and connectors please contact APEM Suffix the part number with legend code (see example on page 4) Code Symbol Description Code Symbol Description

Code

Symbol

Description

-0AJ

High Beam

-041

Horn

-0BD

Engine Coil

-097

Low Beam

-013

Hazard Warning

-0SB

Seat Belt

-027

Rear Fog

-018

Heating

-0UB

USB Connection

-026

Front Fog

-0BU

Brake Test

-0ST

Steam

-021

Windscreen Wiper

-0K6

Arrow

-0EU

-022

Windscreen Washer

-0AG

Battery

-0AD

Side Step

-023

Ventilator Fan

-0GP

Oil Can

-012

Air Con

-0AH

Turn Signal

-020

Windscreen Heating

-040

Engine

-098

Side Lights

-086

ABS

-0BR

Boot/Trunk Release

Some common codes are listed above, for your custom requirements please contact APEM. Unless specified standard engraving with white infill will be supplied APEM

www.apem.com

ECU

Q SERIES Ø22mm (.866") Panel Mount LED Indicators Overview

STANDARD OPTIONS The Q22 Series is available with a range of standard options, to specify your LED, simply choose one option from each column. An example is shown below.

Q

22

F

1

BP

XX

W

28

E

DL

SERIES

MOUNTING HOLE

BEZEL STYLE

TERMINALS

BEZEL FINISH

TYPE OF ILLUMINATION

LED COLOR

VOLTAGE

SEALING

OPTIONS

Q

22 = Ø22mm

R = Red

05 = no resistor*

(Blank) = Unsealed

DL = Daisy Chain

G = Green

12 = 12VDC

E = IP67

LT = Lamp Test

Metal P = Prominent F = Flush Plastic PP = Prominent FP = Flush

1 = Solder Lug/ Metal Fastons C = Bright Chrome (2.8 x 0.8) 4 = Rear epoxy Pins 5 = Rear epoxy Wires

B = Black Chrome

ZZ = Tri-color

Plastic

6 = Short body Pins 7 = Short body Wires

AR = Red

KK = Flashing Light (only 12VDC) YY = Bi-color

G = Satin Grey

BP = Black

XX = Fixed Light

Y = Yellow B = Blue W = White

SR = Super bright Red

Anodised Flush

SG = Super bright Green

AG = Green

12A = 12VAC/DC 24 = 24VDC 24A = 24VAC/DC 28 = 28VDC 28A = 28VAC/DC 110 = 110VAC 220 = 220VAC

SY = Super bright Yellow

AY = Yellow AB = Blue AN = Black

RG = Red/Green RY = Red/Yellow GY = Green/Yellow

RYG = Red/Yellow/ Green

Example Q22F5CXXG12E-0AG Ø22mm, flush bezel, rear epoxy wire terminals, bright chrome finish, fixed light, green, 12VDC LED, IP67 panel sealed, Battery symbol marking

• Gold Faston terminal denotes Anode (+), silver terminal denotes Cathode (-) • Standard wire length is 200mm, 22AWG UL1007, red wire denotes Anode (+), black wire denotes Cathode (-) for other wire lengths consult APEM • For LEDs with alternative voltages consult APEM • Bi-color LEDs, by connecting the gold Faston (+) one color is produced, by reversing the supply voltage another color is produced – Bi-colors are available up to 28VDC • Take care when soldering to the Faston terminals (recommended solder temperature 300°C - 3 sec) • Pin and Wire options are epoxy sealed at the rear of the bezels, termination options 4 and 5 • The Tri-color LED has red and green LEDs when both are connected yellow is produced • Standard Tri-color Faston terminals are two Anodes (+) and one Cathode (-) • Tri-color wires are one red (+) and one green (+) Anode and one black (-) Cathode • Tri-color pins are center (–) Cathode, shortest (+) Anode pin green, longest (+) Anode pin red • Maximum panel thickness: Prominent = 12mm, Flush = 10mm • Plastic bezel material: ABS • Daisy chaining option - has negative (Cathode) terminals linked (3 x Fastons), solder lugs only • Lamp test facility option 4 x solder lug/Faston only • We recommend using super bright LEDs for use at 110 and 220VAC * = For resistorless versions (05) please refer to the forward voltage www.apem.com

APEM

QRM-SERIES Rear Panel Mounting LED Indic QRM6 SERIES

Ă˜6mm (.236") Rear Panel Mount LED Indicators

Technical Dr

8mm

10mm

Distinctive features Rear panel mount LED indicators with 3mm colored diffused epoxy lens or 3mm water clear super bright LEDs. Black chrome finish.

Voltage: 2VDC - 28VDC. Terminals: Pins or 200mm long wires.

IP67 sealing option (EN60529).

12mm Supplied with fixing nut and spring washer.

Typical Applications Process Controls Professional Electrical Appliances Communications, Radar Civil engineering vehicles, trucks, diggers, crane Trains HVAC, Energy Management Lifts Machine Tools www.apem.com APEM

www.apem.com

38

QRM6 SERIES Rear Panel Mount LED Indicators Distinctive features and specifications

VOYC1603R1US

Features • • • • • • • • •

Ø6mm rear mounting LED indicator

3mm flush diffused LED, standard, hyper bright or water clear Bi-color LED options Black chrome finish 2VDC – 28VAC.DC 200mm wires or pin terminations IP67 sealed (EN60529) Epoxy sealed rear end Supplied with fixing nut, spring washer and O-ring

NB: UL Recognized Component TECHNICAL SPECIFICATIONS

02 (No Resistor) 6VDC 12VDC 24VDC 28VDC

Operating Voltage (Min to Max) 1.8 to 3.8VDC 5.4 to 6.6VDC 10.8 to 13.2VDC 21.6 to 26.4VDC 25.2 to 30.8VDC

Operating Current (Typical All Types) 20mA max* 20mA 20mA 20mA 20mA

Max Reverse Voltage: 5V Viewing Angle: 60° Life Expectancy: 100,000 hours Operating Temperature Range: –40 to +85°C Storage Temperature Range: –55 to +100°C Max panel thickness: 3.5mm Torque: 60cNm

Materials Body: Black chrome plated brass Nut: Black chrome plated brass Panel seal: Nitrile O-ring Standard LED Intensity HE Red Green Yellow Blue White Bi-color (Typical) (Red/Green)

Lock washer: Spring steel Terminal seal: Epoxy Wires: 24AWG to UL1061

8,00 0,315

Ø6 +0.15/-0.0

2.80

Voltage

AF 2,00 0,079

PANEL CUTOUT

MCD Output (all voltages) 10mcd 12mcd 6mcd 100mcd 160mcd 10/8mcd

M6 x 0,50 THREAD

Forward Voltage 2.0V 2.2V 2.1V 3.8V 3.8V 2.0V/2.2V

The color is changed by reversing the polarity of the supply voltage.

Super Bright HE Red Green Yellow Blue White Orange

MCD Output (all voltages) 700mcd 2000mcd 8000mcd 200mcd 350mcd 500mcd

Forward Voltage 2.2V 3.5V 2.3V 3.3V 3.3V 2.2V

Hyper Bright

MCD Output (all voltages)

Forward Voltage

HE Red Green Yellow

600mcd 350mcd 140mcd Luminous intensity will be reduced with lower operating current.

Note: The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy.

The company reserves the right to change specifications without notice. * Customer to supply resistor for desired operating current.

Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated.

Luminous intensities and color shades of white LEDs may vary within a batch.

APEM

www.apem.com

2.2V 3.2V 2.0V

r

QRM6 SERIES Rear Panel Mount LED Indicators Technical Drawings

16,77 0,660 8,25 0,325 7,00 0,276

Pins

5,50 0,217  8,00 0,315 M6x0,5 THREAD

0,50 0,020 2,50 0,098 1,25 0,049

x0,50[0,020] SQ

200,0 +/-10 [7.874 +/-0.393] 16,75 0,659 8,25 0,325 7,00 0,276

Wires

5,50 0,217 8,00 0,315 M6x0,5 THREAD

BLACK 24AWG UL1061 WIRE..LED CATHODE RED 24AWG UL1061 WIRE..LED ANODE +

2

www.apem.com

APEM

QRM6 SERIES Rear Panel Mount LED Indicators Overview

STANDARD OPTIONS The QRM Series is available with a range of standard options, to specify your LED, simply choose one option from each column. An example is shown below.

QRM

6

4

B

XX

SERIES

MOUNTING HOLE

TERMINALS

BEZEL FINISH

TYPE OF ILLUMINATION

QRM

6 = Ø6mm

B = Black Chrome

XX = Fixed light

R = Red

02 = no resistor*

YY = Bi-color

G = Green

06 = 6VDC

Y = Yellow

12 = 12VDC

B = Blue

24 = 24VDC

W = White

28 = 28VDC

4 = Pins 5 = Wires

HB LED COLOR

24A

E

VOLTAGE

SEALING E = IP67 (Standard

HR = Hyper Bright Red HG = Hyper Bright Green HY = Hyper Bright Yellow

SR = Super Bright Red SG = Super Bright Green SY = Super Bright Yellow SB = Super Bright Blue SW = Super Bright White

Example QRM64BXXR24E Ø6mm mounting hole with pin terminations, black chrome finish, fixed light, Red 24VDC, panel sealed to IP67.

SO = Super Bright Orange RG = Red/Green RY = Red/Yellow GY = Green/Yellow

• Standard wire length is 200mm, 24AWG UL1061, red wire denotes Anode (+), black wire denotes Cathode (-) for other wire lengths consult APEM • For LEDs with alternate voltages consult APEM • Bi-color LEDs, by connecting the gold Faston (+) one color is produced, by reversing the supply voltage another color is produced – Bi-color are available up to 28VDC • Take care when soldering (recommended solder temperature 270°C - 2 sec) • Maximum panel thickness 3.5mm • For multi-voltage options please consult APEM * = For resistorless versions (02) please refer to the forward voltage

3

www.apem.com

APEM

Rear Panel Mounting LED Indicator QRM8QRM-SERIES SERIES

Technical Drawings

Ă˜8mm (.315") Rear Panel Mount LED Indicators 8mm

10mm

Distinctive features Rear panel mount LED indicators with 5mm colored diffused epoxy lens or 5mm water clear super bright LEDs. Black chrome finish.

Voltage: 2VDC - 28VAC/DC 12mm Pins or 200mm long wires.

IP67 sealing option (EN60529). Supplied with fixing nut and spring washer.

Typical Applications Medical Telecommunications Engineering Transport Systems Special Vehicles Agricultural Vehicles

www.apem.com APEM

www.apem.com

42

QRM8 SERIES Rear Panel Mount LED Indicators Distinctive features and specifications

VOYC1603R1US

Features • • • • • • • • •

Ø8mm rear mounting LED indicator 5mm flush diffused LED, standard, hyper bright or water clear Bi-color and Tri-color LED options Black chrome finish 2VDC – 28VAC/DC 200mm wires or pin terminations IP67 sealed (EN60529) Epoxy sealed rear end Supplied with fixing nut, spring washer and O-ring (Dress nut available as an option - contact APEM)

NB: UL Recognized Component TECHNICAL SPECIFICATIONS Voltage

Operating Voltage (Min to Max) 1.8 to 3.8VDC 5.4 to 6.6VDC 10.8 to 13.2VDC 21.6 to 26.4VDC 25.2 to 30.8VDC

02 (No Resistor) 6VDC 12VDC 24VDC 28VDC

Operating Current (Typical All Types) 20mA max* 20mA 20mA 20mA 20mA

Max Reverse Voltage: 5V Viewing Angle: 60° Life Expectancy: 100,000 hours Operating Temperature Range: –40 to +85°C Storage Temperature Range: –55 to +100°C Max panel thickness: 3.5mm Torque: 60cNm

10,00 0,394

Lock washer: Spring steel Terminal seal: Epoxy Wires: 24AWG to UL1061

Standard LED Intensity HE Red Green Yellow Blue White Bi-color (Typical) (Red/Green) Tri-color (Typical) (Red/Green/Yellow)

3.50

Materials Body: Black chrome plated brass Nut: Black chrome plated brass Panel seal: Nitrile O-ring

Ø8 +0.15/-0.0

AF 2,00 0,079

PANEL CUTOUT

MCD Output (all voltages) 8mcd 6mcd 6mcd 50mcd 500mcd 15/10mcd 15/10/6mcd

M8 x 0,75 THREAD

Forward Voltage 2.0V 2.2V 2.1V 3.8V 3.8V 2.0V/2.2V 2.0V/2.2V/2.1V

Bi-color - the color is changed by reversing the polarity Tri-color - The indicator has red and green LEDs, when both connected yellow is produced.

Super Bright LED HE Red Green Yellow Blue White Orange Hyper Bright HE Red Green Yellow

.

MCD Output (all voltages) 1,300mcd 1,200mcd 350mcd 280mcd 950mcd 500mcd MCD Output (all voltages) 980mcd 300mcd 250mcd

Forward Voltage 2.2V 3.3V 2.0V 3.3V 3.3V 2.2V Forward Voltage 2.2V 3.3V 2.0V

Luminous intensity will be reduced with lower operating current.

Note: The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy.

The company reserves the right to change specifications without notice. * Customer to supply resistor for desired operating current.

Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated. Luminous intensities and color shades of white LEDs may vary within a batch.

APEM

www.apem.com

ear

QRM8 SERIES Rear Panel Mount LED Indicators Technical Drawings

Pins 15,30 0,602 9,30 0,366 6,50 0,256

 6,75 0,266  11,00 0,433 M8x0,75 THREAD

CATHODE -

200,0 +/-10 [7.874 +/-0.393] 15,30 0,602 9,30 0,366 6,50 0,256

Wires

 6,75 0,266  11,00 0,433 M8x0,75 THREAD

BLACK 24AWG UL1061 WIRE..CATHODE RED 24AWG UL1061 WIRE..ANODE +

ADODE + 0,50 x 0,50 SQ [0.019x0.019] 1,25 0,049 1,25 0,049

Dress nuts Pt.No. AUK0001

3,00 0,118

1,00 0,039

 10,00 0,394

Pt.No. AUK0002

1,00 0,039

 10,20 0,401

4,50 0,177 2,25 0,089

www.apem.com

APEM

QRM8 SERIES Rear Panel Mount LED Indicators

-X0245

-X0246 9,30 0,366 6,50 0,256

 6,75 0,266  11,00 0,433 M8x0,75 THREAD

 6,75 0,266  11,00 0,433

24,40 ,961

24,40 0,961

9,30 0,366 6,50 0,256

Custom options

GOLD PIN RED LED ANODE + SILVER PIN..CATHODE -

GOLD PIN GREEN LED ANODE +

GOLD PIN..ANODE +

 1,00 0,040

SILVER PIN CATHODE -

2,50 0,098 2,50 0,098

Fixed and Bi-color long body rigid pins

 1,00 0,040 2,50 0,098 2,50 0,098

Tri-color long body and rigid PCB

Long body matches the behind panel depth of APEM 12200X778 PCB mounting military gradde toggle switches

6,50 0,256

15,30 0,602 9,30 0,366

-X0259

SILVER PIN CATHODE -

 6,75 0,266  11,00 0,433 M8x0,75 THREAD

GOLD PIN ANODE +

 1,00 0,040 2,50 0,098 2,50 0,098

Fixed and Bi-color standard body rigid pins To apply the above custom option, suffix the part number with the -X reference number Example QRM84BXXHB24AE-X0245

APEM

www.apem.com

QRM8 SERIES Rear Panel Mount LED Indicators Overview

STANDARD OPTIONS The QRM Series is available with a range of standard options, to specify your LED, simply choose one option from each column. An example is shown below.

QRM

8

4

B

XX

SERIES

MOUNTING HOLE

TERMINALS

BEZEL FINISH

TYPE OF ILLUMINATION

QRM

8 = Ø8mm

B = Black Chrome

XX = Fixed light

R = Red

02 = no resistor

YY = Bi-color

G = Green

06 = 6VDC

ZZ = Tri-color

Y = Yellow

12 = 12VDC

B = Blue

12A = 12VAC/DC

W = White

24 = 24VDC

4 = Pins 5 = Wires

HB LED COLOR

24A

E

VOLTAGE

SEALING

*

E = IP67 (Standard

24A = 24VAC/DC HR = Hyper Bright Red

28 = 28VDC

HG = Hyper Bright Green

28A = 28VAC/DC

HY = Hyper Bright Yellow

SR = Super Bright Red SG = Super Bright Green

Example QRM84BXXHR24AE Ø8mm mounting hole with pin terminations, black chrome finish, fixed light, Red 24VAC, panel sealed to IP67

SY = Super Bright Yellow SB = Super Bright Blue SW = Super Bright White SO = Super Bright Orange

RG = Red/Green RY = Red/Yellow GY = Green/Yellow

RYG = Red/Yellow/Green

• Standard wire length is 200mm, 24AWG UL1061, red wire denotes Anode (+), black wire denotes Cathode (-) for other wire lengths consult APEM • For LEDs with alternate voltages consult APEM • Bi-color LEDs, by connecting the gold Faston (+) one colour is produced, by reversing the supply voltage another colour is produced – Bi-colours are available up to 28VDC • Take care when soldering (recommended solder temperature 300°C - 3 sec) • The Tri-color LED has red and green LEDs when both are connected yellow is produced • Standard Tri-color termination is two Anodes (+) and one Cathode (-) • Tri-color wires are one red (+) and one green (+) Anode and one black (-) Cathode • Tri-color pins are center (–) Cathode, shortest (+) Anode pin green, longest (+) Anode pin red • Maximum panel thickness 3.5mm • For multi-voltage options please consult APEM * = For resistorless versions (02) please refer to the forward voltage

www.apem.com

APEM

QRM-SERIES Rear Panel Mounting LED Indicator QRM-NV SERIES

Technical Drawings

Ă˜8mm (.315") Rear Panel Mount NVIS LED Indicators 8mm

Distinctive 10mm features Rear panel mount LED indicators with 5mm colored diffused epoxy lens with NVIS compatible fliters for NVIS Green A NVIS Green B NVIS Yellow A NVIS Yellow B NVIS Red NVIS White 12mm Black chrome finish.

Voltage: 2VDC - 28VAC/DC Pins or 200mm long wires.

IP67 sealing option (EN60529). Supplied with fixing nut and spring washer.

Typical Applications Military Medical Telecommunications Engineering Transport Systems Special Vehicles Agricultural Vehicles APEM

www.apem.com www.apem.com

47

QRM-NV SERIES NVIS Compatible Rear Panel Mounting LED Indicator Distinctive features and specifications

VOYC1511US

Features • • • • • • • • • •

Ø8mm rear mounting LED indicator NVIS Green A, NVIS Green B, NVIS Yellow, NVIS Red, NVIS White High temperature NVG filters NVIS compliant to MIL Std 3009 Black chrome finish 2VDC - 28VDC 200mm wire or rigid pin (1.00mm) terminations IP67 sealed (EN60529) Rear end epoxy sealed Supplied with fixing nut, spring washer and O-ring (Optional dress nuts available)

TECHNICAL SPECIFICATIONS Voltage 02 (No Resistor) 6VDC 12VDC 24VDC 28VDC

Operating Voltage (Min to Max) 2.1 to 3.3VDC 5.4 to 6.6VDC 10.8 to 13.2VDC 21.6 to 26.4VDC 25.2 to 30.8VDC

Operating Current (Typical All Types) 20mA max* 20mA 20mA 20mA 20mA

Max Reverse Voltage: 5V Viewing Angle: 60° Life Expectancy: 100,000 hours Operating Temperature Range: –40 to +85°C Storage Temperature Range: –55 to +100°C Max panel thickness: 3.5mm Torque: 60cNm

Materials Body: Black chrome plated brass Nut: Black chrome plated brass Panel seal: Nitrile O-ring

Lock washer: Spring steel Terminal seal: Epoxy Wires: 24AWG to UL1213

LED Color

NVIS Radiance

NW1S Green A

NRA ≤ 1.7eE-10 @ 0.1fL

r ≤ .037

530nm

150mcd

3.3V

NW1S Green A

NRA ≤ 1.7eE-10 @ 0.1fL

r ≤ .057

555nm

150mcd

3.3V

NW1S Yellow Class A

5.0E-8 ≤ NRA ≤ 1.5E-7 @ 15fL

r ≤ .083

150mcd

3.3V

NW1S Yellow Class B

4.7E-8 ≤ NRB ≤ 1.47E-7 @ 15fL

r ≤ 0.83

585nm

150mcd

3.3V

NW1S Red

4.7E-8 ≤ NRB ≤ 1.4E-7 @15 fL

r ≤ .060

605nm

110mcd

2.1V

NW1S White

NRA ≤ 1.0E-9 @ 0.1fL

r ≤ .40

(x).33 (y).33

150mcd

3.3V

NVIS Chromoticity

Dominant Wavelength

-

Luminous intensity will be reduced with lower operating current.

Note: The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy.

The company reserves the right to change specifications without notice.

• Customer to supply resistor for desired operating current.

Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated.

Luminous intensities and color shades of white LEDs may vary within a batch.

APEM

www.apem.com

MCD Output

Forward Voltage

QRM-NV SERIES NVIS Compatible Rear Panel Mounting LED Indicator

ear

Technical Drawings

 6,75 0,266  11,00 0,433 M8x0,75 THREAD

SILVER PIN..CATHODE -

200,0 +/-10 [7.874 +/-0.393] 17,00 0,669 9,30 0,366 6,50 ,256

Wires

17,00 0,669 9,30 ,366 6,50 0,256

Pins

 6,75 0,266  11,00 0,433 M8x0,75 THREAD

BLACK 24AWG UL1213 WIRE..CATHODE LED COLOUR 24AWG UL1213 WIRE..ANODE +

GOLD PIN..ANODE +

 1,00 0,040 2,50 0,098 2,50 0,098

Hardware

Dress nuts for 8mm QRM

Panel Cut out 10,00 0,394

Pt.No. AUK0001

AF 2,00 0,079

 10,00 0,394

3,00 0,118

8mm nut (std)

1,00 0,039

Ø 6,00 ±0,1

8mm

1,00 0,039

M8 x 0,75 THREAD

Pt.No. AUK0002

 10,20 0,401

4,50 0,177 2,25 0,089

www.apem.com

APEM

QRM-NV SERIES NVIS Compatible Rear Panel Mounting LED Indicator Overview

STANDARD OPTIONS The QRM Series is available with a range of standard options, to specify your LED, simply choose one option from each column. An example is shown below.

QRM-NV

8

5

B

XX

SERIES

MOUNTING HOLE

TERMINALS

BEZEL FINISH

TYPE OF ILLUMINATION

QRM-NV

8 = Ø8mm

4 = Ridgid Pins

B = Black Chrome

XX = Fixed light

5 = Wires

NV-GRA LED COLOR

24A

E

VOLTAGE

SEALING

NV-GRA = NVIS Green A

02 = no resistor*

NV-GRB = NVIS Green B

06 = 6VDC

NV-YWA = NVIS Yellow A

12 = 12VDC

NV-YWB = NVIS Yellow B

12A = 12VAC/DC

NV-RD = NVIS Red

24 = 24VDC

NV-WH = NVIS White

24A = 24VAC/DC

E = IP67 (Standard)

28 = 28VDC 28A = 28VAC/DC

Example QRM-NV85BXXNV-GRA24AE Ø8mm mounting hole with wire terminations, black chrome finish, fixed light NVIS Green A 24V AC, panel sealed to IP67

• Standard wire length is 200mm, 24AWG UL1213, red wire denotes Anode (+), black wire denotes Cathode (-) for other wire lengths consult APEM • For LEDs with alternate voltages consult APEM • Take care when soldering (recommended solder temperature 270°C - 2 sec) • Maximum panel thickness 3.5mm • For resistorless versions (02) please pay attention to the forward voltage • For multi-voltage options please consult Apem • Suitable for the toughest enviroment and compliant to MIL standard specification * = For resistorless versions (02) please refer to the forward voltage

www.apem.com

APEM

QS SERIES

Snap in Panel Mount LED Indicators

Distinctive features Snap in panel mount LED indicators with colored diffused flat lens, for typical replacement of filament and neon indicators.

• 6mm, 8mm, 10mm and 12mmØ cut-out sizes • Front panel snap-in mounting requires no additional hardware • Colored diffused flat lenses • Available colours: Red, Green, Yellow, Blue, Orange, White (clear) • Voltage range: 2VDC – 220VAC • Terminations: solder lug/faston, 6mm (2.0 x 0.5mm), 8mm, 10mm, 12mm (2.8 x 0.8mm) or wires (200mm standard length) • Standard intensity diffused LEDs or high brightness LEDs for daylight viewing • Bi-color LED option • UL496 recognised component

Typical Applications Domestic and Commercial white goods Catering Equipment Fire Alarm panels Power distribution sockets Battery chargers / Power supplies

APEM

www.apem.com

51

QS SERIES Snap-in Panel Mount LED Indicators Distinctive features and specifications

Features • • • • • • • • •

6mm, 8mm, 10mm and 12mm Ø cut-out sizes Front panel snap-in mounting requires no additional hardware Colored diffused flat lenses Red, Green, Yellow, Blue, Orange, White (clear) 2VDC – 220VAC 6mm solder lug (2.0x0.5mm) or 200mm wire terminations 8mm, 10mm, 12mm solder lug/Faston (2.8x0.8mm) or 200mm wire terminations Standard intensity diffused LED or high brightness LED for daylight viewing Bi-color and Tri-Color (8 and 10mm only) options

NB: UL Recognized Component TECHNICAL SPECIFICATIONS Voltage 02 (No Resistor) 6VDC 12VDC 24VDC 28VDC

Operating Voltage (Min to Max) 1.8 to 2.5VDC 5.4 to 6.6VDC 10.8 to 13.2VDC 21.6 to 26.4VDC 25.2 to 30.8VDC

110VAC (not available on QS6) 220VAC (not available on QS6)

Operating Current (Typical All Types) 20mA max* 20mA 20mA 20mA 20mA

99 to 110VAC 207 to 253VAC

Standard LED HE Red Green Yellow Blue White(clear) Orange Bi-color (Typical) (Red/Green) Tri-color (Typical) (Red/Green/Yellow)

Max Reverse Voltage: 5V Viewing Angle: 30–100° (dependant on model) Life Expectancy: 100,000 hours Operating Temperature Range: –40 to +85°C

6mA 3mA

6mm Intensity (all voltages) 40mcd 40mcd 30mcd 1,200mcd 1,200mcd 60mcd 20/15mcd

8,10 & 12mm Intensity 100mcd 60mcd 50mcd 1600mcd 1600mcd 45mcd 30/12mcd 60/15/13mcd

_

Forward Voltage 2.0V 2.2V 2.1V 3.8V 3.8V 2.0V 2.0V/2.2V 2.5V

Bi-color - The color is changed by reversing the polarity of the supply voltage.

Tri-color - The indicator has red and green LEDs, when both connected yellow is produced.

High Brightness HE Red Green Yellow Orange

6mm Intensity (all voltages) 3,700mcd 2,000mcd 1,200mcd 4,500mcd

8,10 & 12mm Intensity 6,000mcd 1,900mcd 2,100mcd 4,500mcd

Forward Voltage 2.2V 3.2V 2.0V 2.2V

Luminous intensity will be reduced with lower operating current.

Note: The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy.

The company reserves the right to change specifications without notice. * Customer to supply resistor for desired operating current.

Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated.

Luminous intensities and color shades of white LEDs may vary within a batch.

APEM

www.apem.com

52

QS SERIES Snap-in Panel Mount LED Indicators Technical Drawings

Ø6mm

GOLD TAB ANODE + 2,0x0,5 FASTON TAB

RED WIRE ANODE + BLACK WIRE CATHODE -

1,34 0,053 19,00 0,748

1,34 0,053 19,00 0,748

 5,90 0,232

 7,20 0,283

Wires

 5,90 0,232

 7,20 0,283

Solder lug

200,0 +/-10 [7.874 +/- 0.393]

25,00 0,984 SILVER TAB CATHODE -

Ø8mm

1,50 0,059

26,50 1,043 36,50 1,437

9,35 0,368

RED WIRE ANODE + BLACK WIRE CATHODE -

1,50 0,059

26,50 1,043

 7,90 0,311

GOLD TAB ANODE + 2,8x0,8 FASTON TAB

Wires  10,00 0,394

 7,90 0,311

 10,00 0,394

Solder lug/Faston

200,0 +/-10 [7.874 +/-0.393]

SILVER TAB CATHODE -

Ø10mm

1,75 0,069

9,35 0,368

26,50 1,043 36,50 1,437

RED WIRE ANODE + BLACK WIRE CATHODE -

1,75 0,069

26,50 1,043

 9,85 0,388

GOLD TAB ANODE + 2,8x0,8 FASTON TAB

Wires  12,00 0,472

 9,85 0,388

 12,00 0,472

Solder lug/Faston

200,0 +/-10 [7.874 +/-0.393]

SILVER TAB CATHODE -

Ø12mm

2,00 0,079

9,35 0,368

26,50 1,043 36,50 1,437

RED WIRE ANODE + BLACK WIRE CATHODE -

2,00 0,079

26,50 1,043

 11,85 0,467

GOLD TAB ANODE + 2,8x0,8 FASTON TAB

Wires  14,00 0,551

 11,85 0,467

 14,00 0,551

Solder lug/Faston

200,0 +/-10 [7.874 +/-0.393]

SILVER TAB CATHODE -

53

www.apem.com

APEM

QS SERIES Snap-in Panel Mount LED Indicators Order Overview

STANDARD OPTIONS The QS Series is available with a range of standard options, to specify your LED, simply choose one option from each column. An example is shown below.

QS

8

3

XX

R

220

SERIES

MOUNTING HOLE

TERMINALS

TYPE OF ILLUMINATION

LED COLOR

VOLTAGE

QS

6 = Ø6mm 8 = Ø8mm

1 = Solder lug/ faston 3 = Wires

10 = Ø10mm 12 = Ø12mm

XX = Fixed light

R = Red

02 = no resistor*

YY = Bi-color

G = Green

06 = 6VDC

ZZ = Tri-color (10mm only)

Y = Yellow

12 = 12VDC

B = Blue

24 = 24VDC

W = White (clear)

28 = 28VDC

O = Orange

110 = 110VAC

KK = Flashing light (12 - 28VDC)

220 = 220VAC HR = Hyper Bright Red HG = Hyper Bright Green HY = Hyper Bright Yellow HO = Hyper Bright Orange

RG = Red/Green

Example QS83XXR220 Ø8mm mounting hole with wire terminations fixed light, Red 220VAC

RYG = Red/Yellow/Green (10mm Only)

• Gold solder lug/Faston terminal denotes Anode (+), silver terminal denotes Cathode (-) • Standard wire length is 200mm, QS6 & QS8 24AWG UL1061, QS10 & QS12 22AWG UL1061, red wire denotes Anode (+), black wire denotes Cathode (-) for other wire lengths consult APEM • For LEDs with alternate voltages consult APEM • Bi-color LEDs, by connecting the gold Faston (+) one color is produced, by reversing the supply voltage another color is produced – Bi-colors are available up to 28VDC • Take care when soldering to the Faston terminals (recommended solder temperature 270°C - 2 sec) • The Tri-color LED has red and green LEDs when both are connected yellow is produced • Maximum panel thickness 11mm • We recommend using high brightness LEDs for use at 220VAC • For multi-voltage options please consult APEM * = For resistorless versions (02) please refer to the forward voltage

54

www.apem.com

APEM

Q SERIES

Notations

APEM

www.apem.com

55

WORLDWIDE SALES & CUSTOMER SUPPORT

APEM USA

APEM USA

USA 63 Neck Road HAVERHILL, MA 01835 Tel: (+1) 978 372 1602 Fax: (+1) 978 372 3534 info@apem.com

EMEA

APEM SWEDEN APEM UK

MEC DENMARK

APEM BENELUX

APEM GERMANY

APEM FRANCE APEM ITALY

BENELUX Avenue Excelsiorlaan 21 1930 ZAVENTEM Belgium Tel B: (+32) 27 25 05 00 Tel NL: (+31) (70) 799 91 51 Fax: (+32) 27 25 22 00 sales@apemswitches.be FRANCE 55, avenue Edouard Herriot BP1 82303 CAUSSADE Cedex Tel: (+33) 5 63 93 14 98 Fax: (+33) 5 63 93 19 03 commercial@apem.fr GERMANY Gewerbehof Giesing Paulsdorfferstr. 34, 2. OG D-81549 MUNICH Tel: (+49) 89 45 99 11 0 Fax: (+49) 89 48 10 39 info@apem.de

SWEDEN Isafjordsgatan 35 S-16440 KISTA Tel: (+46) 8 626 38 00 Fax: (+46) 8 626 82 49 info@apem.se UNITED KINGDOM Drakes Drive LONG CRENDON, Bucks HP18 9BA England Tel: (+44) 1 844 202400 Fax: (+44) 1 844 202500 sales@apem.co.uk DENMARK MEC Industriparken 23 2750 BALLERUP Tel: (+45) 44 97 33 66 Fax: (+45) 44 68 15 14 danmec@mec.dk

ITALY Via Marconi 147G 12030 MARENE (CN) Tel: (+39) 0172 74 31 70 Fax: (+39) 0172 74 31 71 apem.italia@apem.it

ASIAPAC

APEM CHINA

CHINA RongGuang Building, 602A 11, Changshun Road 200051 SHANGHAI Tel: (+86) 21 6278 8546, (+86) 21 6278 6872 Fax: (+86) 21 6208 8209 contact@apem.com.cn

MORE THAN 130 DISTRIBUTORS WORLDWIDE (Complete list available on www.apem.com)

APEM

www.apem.com

APEM RESERVES THE RIGHT TO AMEND SPECIFICATIONS WITHOUT NOTICE - DESIGN COULEUR-CITRON.COM - PHOTOS: ISTOCK PHOTO

USA 970 Park Center Drive VISTA, CA 92081 Tel: (+1) 760 598 2518 Fax: (+1) 760 598 2524 info@apem.com

VOYG1603R2US-2016

AMERICAS