HIGH SPEED DATA NETWORKING

ENGINEERED TO CONNECT

HIGH SPEED DATA NETWORKING CFP I QSFP+ I SFP+ I YFLEX CONNECTOR SOLUTIONS

CFP HIGH SPEED CONNECTOR SYSTEM Yamaichi Electronics is an official supplier reviewer company within the CFP Multi-Source Agreement (MSA), and the leading company for high speed connector products. We are the first company which has been bringing these connectors into the global market. Complete solutions from connector to mechanical components are provided for CFP8, CFP4, CFP2, and CFP. SERIES OVERVIEW • All Yamaichi CFP series are designed in accordance with the Multi-Source Agreement (MSA) • CFP, CFP2, CFP4 for 100Gbps application • CFP2 56Gbps connector for 200Gbps application • CFP8 for 400Gbps application (Yamaichi Electronics is the first company achieving a 400Gbps connector in the world) • Supporting other standards such as IEEE, OIF, and ITU-T • Customized heatsink is possible for all CFP products • Kapton tape on cage is an option for efficient thermal dissipation

CFP8 - SERIES CN168-124 FEATURES • High speed transmission: 400G 28Gbps/ch x 16ch • Pitch: 0.5mm • Pin count:124 pins • Same size as CFP2, but double performance of CFP2 • First connector in the world for 400Gbps Ethernet

PART NUMBER HOST CONNECTOR

PART NUMBER MECHANICAL COMPONENTS CN168

CN168S - 124 - 0001 Series

Series

Host (Surface Mount Type)

G = Connector Cover C = Cage (with EMI Finger)

-

*

-

124 - 000 *

No. of Contacts

PART NUMBER PLUG CONNECTOR

1 = Dual Slot (MSA Standard)

2 = Single Slot

CN168P - 124 - 0001 Series

PART NUMBER HEAT SINK CN168

Plug (Straddle Mount Type) Series F = Heat Sink

No. of Contacts Side to Side

2

-

F -

124 - 0001

CFP4 - SERIES CN121-056 FEATURES •High speed transmission: 100G 28Gbps/ch x 4ch •Pitch: 0.6mm •Pin count: 56 pins • Dust cap for EMI protection is available

PART NUMBER HOST CONNECTOR

PART NUMBER MECHANICAL COMPONENTS CN121

CN121S - 056 - 0001 Series

Series

Host (Surface Mount Type)

G = Connector Cover C = Cage

PART NUMBER PLUG CONNECTOR CN121P - 056 - 0004

-

*

-

056 - 000 *

No. of Contacts 1 = Quad Slot (MSA Standard)

2 = Single Slot

PART NUMBER HEAT SINK Series

CN121

Plug (Straddle Mount Type)

-

F -

056 - 000 *

Series F = Heat Sink No. of Contacts 1 = Side-to-Side

ACCESSORIES

2 = Front-to-Back

TEST FIXTURE FOR CFP4 APPLICATION - For CFP4 Host Board Development and High Speed Signal Compliance Testing

Passive Breakout Module A - Part Number: CA012-02-03 PART NUMBER DUST CAP CN121D - 056 - 000 3 Series Design No. 3 = Dust Cap

APPLICATION - For CFP4 Host Board Development and Channel Evaluation

Passive Breakout Module B - Part Number: CA012-02-04

APPLICATION - For CFP4 Module Development and Testing

Host Board - Part Number: CA012-02-02 3

CFP2 - SERIES CN121-104 FEATURES • Versions to transmit high speed: - 28Gbps/ch x 4ch = 100Gbps per slot - 56Gbps/ch x 4ch = 200Gbps per slot • 28Gbps and 56Gbps are compatible • Pitch: 0.6mm • Pin count: 104 pins • Dust cap & dummy module for EMI protection is available

PART NUMBER MECHANICAL COMPONENTS CN121

PART NUMBER HOST CONNECTOR

-

*

-

104 - 000 *

CN121S - 104 - *00* Series Series 0001 = 28Gbps 0002 = 28Gbps, 400 pcs. in Reel 1001 = 56Gbps

PART NUMBER PLUG CONNECTOR CN121P - 104 - ****

G = Connector Cover C = Cage No. of Contacts 1 = Dual Slot (MSA Standard)

2 = Single Slot

PART NUMBER FOR HEAT SINK AND CLIP CN121

-

* -

104 - 000 *

Series Plug (Straddle Mount Type) 0003 = 28Gbps 1003 = 56Gbps

Series F = Heat Sink No. of Contacts For Heat Sink For Clip = 8

ACCESSORIES

M = Clip

1 = Side-to-Side

2 = Front-to-Back

TEST FIXTURE FOR CFP2 APPLICATION - For CFP2 4x25G Module Development and Testing Host Board - Part Number: CA012-03-01 APPLICATION - For CFP2 Host Board Development and High Speed Signal Compliance Testing

PART NUMBER DUMMY MODULE AND DUST CAP

Passive Breakout Module A - Part Number: CA012-03-03

CN121D - 104 - 000 *

APPLICATION - For CFP2 Host Board Development and Channel Evaluation

Series Design No. 1 = Dummy Module

4

2 = Dust Cap

Passive Breakout Module B - Part Number: CA012-03-04

CFP - SERIES CA009 FEATURES • High speed transmission: 10Gbps/ch, (for 40Gbps /100Gbps ) • Pitch: 0.8mm • Pin count:148 pins • Heat sink with thermal interposer is available for efficient thermal dissipation

PART NUMBER HOST CONNECTOR

PART NUMBER MECHANICAL COMPONENTS CA009

CA009 - S001 - 001

-

Series

Series

Host (Surface Mount Type)

1201 = Guide Rail 1203 = External Bracket 1204 = Back End Plate 1400 = Host Connector Cover

PART NUMBER PLUG CONNECTOR

**** - 001

Design No.

CA009 - P003 - 001 PART NUMBER HEAT SINK Series

CA009

-

1310 - 001

-

1300 - 002

Plug (Straddle Mount Type) Series Heat Sink (MSA Standard)

CA009 Series

Long Heat Sink w. Thermal Interposer

DAC (DIRECT ATTACHED COPPER CABLE) - SERIES CA013 FEATURES • Supports high speed transmission at 25Gbps x 4ch • Passive copper cable for 100GBASE -CR4 and EDR is available • Compatible to plug in CFP Multi-Source Agreement (MSA) connector • Supplied as complete cable assembly • Maximum cable length: 4m (CA013 only) • Cable specification for CFP2 is available with AWG26 by 1.0m • Active copper cable with retimer tip is under development

PART NUMBER CFP4 PASSIVE CABLE CA013

-

0202 - ** PO **

Series Design No. 26 = 26AWG,

28 = 28AWG

Design No. Length of Cable (in meters) 05 = 0.5, 10 = 1.0, 20 = 2.0, 30 = 3.0,

40 =4.0

5

QSFP+ CONNECTOR AND KIT The enhanced QSFP+ connector and mechanical kit is supporting data rates up to 28Gbps per channel.

All products are designed in accordance with the Multi-Source Agreement (MSA).

QSFP+ - SERIES CN120 HOST CONNECTOR

PART NUMBER CN120 - 038 - * 00 * Series No. of Contacts 0 = Style B

1 = Style A

Contact Plating 1 = 0.76µm Au 2 = 0.40µm Au

STYLE DEFINITION Style

SFF Spec.

A

SFF 8662

7.37

9.88

B

SFF 8672

5.18

7.69

Peg to Row A B

FEATURES

Peg to Row A Peg to Row B

: QSFP+ 56Gbps

COMING SOON

MECHANICAL KIT (STYLE B ONLY)

1)

• High Speed 28Gbps • Pitch: 0.8mm • Pin count: 38 pins • Compatible with existing QSFP (Infiniband: QDR / FDR / EDR) module • Fully compatible foot pattern with existing QSFP connector

PART NUMBER CN120A - ** 0 * Series Cage Assembly Type: 11 = 1 x 1 Assembly 14 = 1 x 4 Assembly Product Type: 1 = EMI Elastomer Gasket 2 = Through Bezel (Spring Finger) Heatsink: 0 = No Heatsink 1 = With Heatsink (Height = 13.5mm) 2 = With Heatsink (Height = 6.5mm) 3 = With Heatsink (Height = 4.2mm)

FEATURES • Complies with W7SFF-8683 • Optional single or double light pipes • Heat sink with 3 different heights (4.2, 6.5 and 13.5mm)

TEST FIXTURE FOR QSFP+ (STYLE B)

Light Pipe: 0 = No Light Pipe 1 = Single Light Pipe (Cut-out ∅2.11) 2 = Dual Light Pipe (Cut-out ∅2.11) 3 = Single Light Pipe (Cut-out ∅2.54) 4 = Dual Light Pipe (Cut-out ∅2.54) 5 = Single Light Pipe (Cut-out ∅2.67) 6 = Dual Light Pipe (Cut-out ∅2.67)

APPLICATION - For QSFP+ Module Development and Testing Host Board - Part Number: CA012-01-02 1)

6

Style A in planning

- *

*

SFP+ CONNECTOR The enhanced small form-factor pluggable (SFP+) connector is supporting data rates at 28Gbps.

The design is in accordance with the Multi-Source Agreement (MSA).

SFP+ - SERIES CN109 HOST CONNECTOR

FEATURES • High Speed 28Gbps • Pitch: 0.8mm • Pin count: 20 pins • Compatible with existing SPF+ module • Fully compatible foot pattern with existing SFP connectors • Mechanical kit in planning

PART NUMBER CN109S - 020 - O * 01 Series No. of Contacts Packing: 0 = 750 pcs. / Reel 1 = 100 pcs. / Reel Contact Plating 01 = 0.76µm Au

YFLEX FEATURES • Available to transmit high speed in Gbps with low loss • Effective to use at harshest temperature, humidity and EMI condition • Customized depending on the layout and requirement

PART NUMBER YF *

-

A*****

Series A = Single Layer B = Dual Layer Design Number (internal only)

STRUCTURE TO ACHIEVE HIGH SPEED TRANSMISSION GND Signal Signal GND

LCP achieves the transmission with a low dielectric loss

Copper Film Ground

Bump

GND and copper film ground are connected with silver bumps which also protect from EMI

7

TECHNICAL DATA ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE

YAMAICHI ELEC TRONICS Deutschland GmbH Concor Park Bahnhofstraße 20 85609 Aschheim-Dornach Germany

YAMAICHI ELEC TRONICS Italia s.r.l.

Centro Direzionale Colleoni Via Colleoni, 1 Palazzo Taurus Ing. 1 20864 Agrate Brianza (MB) Italy

YAMAICHI ELEC TRONICS GB Ltd. 6 The Clockhouse Stratton Park Micheldever Hampshire SO21 3DP Great Britain

Phone +49 (0)89 45109 - 0 Fax +49 (0)89 45109 - 110 E-Mail info@yamaichi.de Web www.yamaichi.eu

Phone +39 039 6881-185 Fax +39 039 6892-150 E-Mail sales@yamaichi.it Web www.yamaichi.eu

Phone +44 (0)7808 493377 Fax +44 (0)1962 774902 E-Mail sales@yamaichi.co.uk Web www.yamaichi.eu

Version March 2016