Folie 1

Page 1

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers/ anterior stained crowns - layered

General information


IPS Empress CAD is used for the fabrication of highly aesthetic, fully anatomical single-unit restorations by means of the CAD/CAM technology.

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers/ anterior stained crowns - layered

General information


CAD IPS Empress – the Original IPS Empress has been established as the “gold standard“ In the processing of ceramic. In addition to the proven PRESS technology, the CAD/CAM technology has also developed in the area of all ceramics. The products IPS Empress Esthetic and IPS Empress CAD are available for these processing technologies. The two ceramics are characterized by excellent strength values and outstanding aesthetic appearance. Both products may subsequently be stained and/or glazed using IPS Empress Universal Shade/Stains or individually veneered using IPS Empress Esthetic Veneer layering ceramic.

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Product information Material Uses Composition Block concept Product overview for CEREC Preparation guidelines and minimum thicknesses

L

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Product information - Material

IPS Empress CAD is made out of Leucitereinforced glass-ceramic which consists of a glass and a crystal phase.

Leucite crystals of few microns homogeneoulsy grow in a multi-stage process directly from the amorphous glass phase.

The small size the homogeneous distribution of crystals provides strength to the material and enamel-like wear and translucency.

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Product information - Material 

Maximum material homogeneity

Flexural strength 160 MPa

Successful, as well as clinically proven for almost 20 years

Accuracy of fit and a homogeneous surface

Staining and/or veneering using IPS Empress Universal Stains and IPS Empress Esthetic Veneer

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Product information - Uses Indications IPS Empress CAD Blocks can be used for the following adhesively cemented restorations

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Product Information - Uses Indications For further processing of IPS Empress CAD restorations, users have the following options: •

Aesthetic characterization and glazing of fully anatomical restorations using IPS Empress Universal Shades, Stains and Glaze pastes.

•

Aesthetic veneering in the incisal third of reduced restorations (veneers and anterior crowns) using IPS Empress Esthetic Veneer.

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Product information - Uses Contraindications 

Bridge reconstructions

Conventional cementation

Very deep, subgingival preparations

Patients with severly reduced residual dentition

Bruxism

Fully (circularly) veneered anterior and posterior crowns using IPS Empress Esthetic Veneer

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Product information - Uses Important processing restrictions Failure to observe the following restrictions may compromise the success achieved with IPS Empress CAD: 

The fully anatomical IPS Empress CAD restorations must not fall below the required minimum thickness

The reduced IPS Empress CAD restorations must not fall below the required minimum thickness

The maximum layer thickness of IPS Empress Esthetic Veneers layering materials must not be exceeded

IPS Empress CAD restorations must not be stained using materials other than IPS Empress Universal Shades, Stains and Glaze

Powder materials must not be mixed with paste materials

The blocks must not be milled in a non-compatible CAD/CAM system

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Product information - Composition 

IPS Empress CAD Blocks Components: SiO2 Additional contents: Al2O3, K2O, Na2O, CaO and other oxides, pigments

IPS Empress Esthetic Veneer Components: SiO2 Additional contents: Al2O3, K2O, Na2O, CaO and other oxides, pigments

IPS Empress Universal Shades, Stains and Glaze paste Components: oxides, glycerin, butandiol

IPS Empress Esthetic Veneer Build-up Liquid Components: water, butandiol, chloride

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Product information - Composition 

IPS Empress Universal Glaze and Stain Liquid Components: butandiol

IPS Contrast Spray Chairside Components: Pigment suspension in ethanol; the propellant is a fluoridated hydrocarbon

IPS Natural Die Material Components: Polyester urethane dimethacrylate, paraffin oil, SiO2 and copolymers

IPS Natural Die Material Separator Components: Wax dissolved in hexane

IPS Ceramic Etching Gel Components: Hydrofluoric acid

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Product information – Block concept IPS Empress CAD Blocks The shading and translucency control of the IPS Empress CAD Blocks is based on a newly developed translucency concept built on the A-D, Chromascop, and Bleach BL shade guides. The IPS Empress CAD Blocks are available in two degrees of Translucency:   

IPS Empress CAD

High Translucencty (HT) Low Translucencey (LT) Polychromatic block (Multi) combines HT and LT

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Product information – Block sizes HT – Blocks

LT - Blocks

V12

V12

I8

-

I10

I10

I12

I12

-

C14

-

C14L L

C14L available only on the IPS Empress CAD Multi C14 L is 2.4 mm wider and 0.4mm longer than the regular C14 block accommodating larger restorations.

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Product information – Block concept IPS Empress CAD HT (High Translucency) 

9 most popular A-D and 3 Chromascop shades in 4 sizes

Ideally suitable for the fabrication of smaller restorations (e.g. inlays and onlays)

True-to-nature chameleon effect

Life-like fluorescence

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Product information – Block concept IPS Empress CAD LT (Low Translucency) 

9 most popular A-D, 3 Chromascop and 4 Bleach BL shades in 4 sizes

Ideally suitable for the fabrication of larger restorations (e.g. anterior and posterior crowns)

True-to-nature brightness value and chroma, life-like fluorescence

Ideally suitable for the cut-back technique

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Product information – Block concept IPS Empress CAD Multi 

5 most popular A-D shades in 3 sizes

Natural shade gradient from the dentin to the incisal areas

IPS Empress CAD Multi

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

IPS Empress CAD LT

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Product information – Block concept IPS Empress CAD Multi 

IPS Empress CAD

True-to-nature transition of shade, transluceny and fluorescence

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD IPS Empress CAD MULTI

IPS Empress CAD

Product information

SHADES

SIZES

A1

I12, C14, C14L

A2

I12, C14, C14L

A3

I12, C14, C14L

A3.5

I12, C14, C14L

B1

I12, C14, C14L

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Product information – Overview of blocks

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Product information – Overview of blocks

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Product information – Overview of blocks

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Product information – Overview of blocks

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Product information – Preparation guidelines and minimun thicknesses Inlays and Onlays

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Product information – Preparation guidelines and minimun thicknesses Inlays and Onlays

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Product information – Preparation guidelines and minimun thicknesses Veneers

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Product information – Preparation guidelines and minimun thicknesses Veneers

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Overview of the treatment procedure Shade determination Intra-oral Imaging Milling Polishing or Staining / Glazing and Veneering Ceramic Firing Etching / Silanating Cementation

IPS Empress CAD

Product information

L

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Overview of the treatment procedure – Shade determination Determination of the tooth shade Shade determination should be carried out at daylight. Individual characteristics have to be taken into consideration.

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Overview of the treatment procedure – Shade determination Determination of the shade of the prepared tooth The shade of the prepared tooth can be determined with the help of the IPS Natural Die Material shade guide.

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Overview of the treatment procedure – Intra-oral imaging Access to the treatment field OptraGate retracts lips and cheeks during dental treatment.

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Overview of the treatment process – Intra-oral imaging Optimum recording IPS Contrast Spray Chairside is used to achieve optimum recordings for CAD/CAM restorations.

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Overview of the treatment process – Milling Milling To mill the restoration, the suitable IPS Empress CAD Block is selected in accordance with the corresponding clinical situation. After determining the shade, translucency and size of the block, it is mounted in the CAM unit and the restoration is milled.

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Overview of the treatment process – Staining and veneering Internal characterization Tetric Color are light-curing composite stains for individualized characterizations.

External characterization IPS Empress Universal Shade / Stains are ceramic stains for individualized characterizations.

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Overview of the treatment process – Staining and veneering Cut-back technique IPS Empress Esthetic Veneer ceramic materials are leucitereinforced layering materials for the cut-back technique.

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Overview of the treatment process – Ceramic firing Fixation IPS Empress CAD restorations are generally fired on a honey comb firing tray. IPS Object Fix is used to secure the restorations on the metal pins.

Ceramic firing Ceramic firing is conducted in the Programat P300.

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Overview of the treatment process – Etching and silanating Conditioning of the ceramic furnace Generally, glass-ceramics are etched using IPS Ceramic Etching Gel to achieve a sound bond between the cementation material and the all-ceramic restoration.

Silanating Subsequent silanating of the bonding surface using Monobond-S results in a sound bond between the etched all-ceramic material and the luting composite.

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Overview of the treatment process – Cementation Isolation of the treatment field OptraDam is a convenient, 3-dimensional rubber dam, which can be quickly and easily inserted thanks to its anatomical shape and the integrated frame.

Enamel etching and dentin conditioning For the preparation of adhesive cementation with Variolink, Total Etch is used.

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Overview of the treatment process – Cementation Luting composites   

Variolink II Variolink Veneer Multilink Automix

LED lights 

IPS Empress CAD

bluephase 16i

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Overview of the treatment process – Polishing Polishing OptraFine, the specially developed, high performance chairside diamond polishing system for ceramic materials combines the highest efficiency with outstanding polishing results.

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD IPS Empress CAD Inlays / Onlays - polished Preparation Finishing Adhesive cementation Conditioning the preparation Polishing Result

L

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Inlays / Onlays polished – Preparation

Preoperative situation. The amalgam restoration has to be replaced.

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Inlays / Onlays polished – Preparation

Spraying the preparation with IPS Contrast Spray Chairside

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Preparation ready for intra-oral imaging

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Inlays / Onlays polished – Finishing

Smooth out attachment point and take proximal contacts into account

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Extra-oral polishing of proximal areas and larger surfaces

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Inlays / Onlays polished – Adhesive cementation

Etching of the IPS Empress CAD restoration using IPS Ceramic Etching Gel

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Silanating the IPS Empress CAD restoration using Monobond-S

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Inlays / Onlays polished – Conditioning the preparation

Position the restoration and remove excess.

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

For polymerization, cover the restoration margin with glycerine gel and polymerize the restoration from all sides.

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Inlays / Onlays polished – Polishing

Adjusting the occlusion/articulation using a fine diamond

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Finishing/smoothing out the surfaces using Finisher F (light-blue)

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Inlays / Onlays polished – Polishing

Polishing using Polisher P (dark-blue)

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

High-gloss polishing using the high-gloss brush and diamond paste HP

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Inlays / Onlays polished – Result

Completed, polished IPS Empress CAD restoration

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD IPS Empress CAD Inlays / Onlays - stained Finishing and preparing for stain and glaze firing Stain and glaze firing Result

L

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Inlays / Onlays stained – Finishing and preparation for stain and glaze firing

Smooth out attachment point and take proximal contacts into account

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Clean the restoration before staining

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Inlays / Onlays stained – Stain and glaze firing

Evenly apply the glazing material on the entire outer surfaces of the restoration.

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Inlays / Onlays stained – Stain and glaze firing

Apply the mixed Shade material directly into the unfired glazing material layer. Intensify the corresponding dentin shade in the cervical and occlusal areas and use IPS Empress Universal Shade Incisal to imitate the incisal areas. Apply individualized effects and characterizations on cusps and in fissures using the Stains materials.

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Inlays / Onlays bemalt – Malfarben- und Glanzbrand

Place the objects on the honey-comb firing tray and start the firing program

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Ceramic firing can be conducted in the Programat P300

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Inlays / Onlays bemalt – Ergebnis

Completed IPS Empress CAD restoration, stained and glazed in one step.

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD IPS Empress CAD veneers / anterior and posterior crowns – stained Finishing Optional: Die fabrication Prepairing for staining Stain and glaze firing Optional: Shade check Glaze firing Result L

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Veneers / anterior and posterior crowns stained – Finishing and die fabrication (optional)

Design individual shape adjustments and a true-to-nature surface structure

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

The control die made of IPS Natural Die Material is the optimum basis for a true-tonature all-ceramic restoration.

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Veneers / anterior and posterior crowns stained – Prepairing for staining

Before staining, clean the restoration using the steam jet

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

The dentin body is intensified using IPS Empress Universal Shade

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Veneers / anterior and posterior crowns stained – Stain and glaze firing

The incisal area is imitated using IPS Empress Universal Shade Incisal

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Individualized effects and characterizations are designed using IPS Empress Universal Stains

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Veneers / anterior and posterior crowns stained – Stain and glaze firing and shade check (optional)

Place the objects on the honey-comb firing tray and start the firing program

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Shade check. If necessary, the shade intensity can be increased by additional staining.

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Veneers / anterior and posterior crowns stained – Glaze firing

Evenly apply the glazing material on the entire outer surfaces of the restoration.

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Place the objects on the honey-comb firing tray and start the firing program.

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Veneers / anterior and posterior crowns – Result

Completed, stained, and glazed IPS Empress CAD crown and veneer.

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD IPS Empress CAD Veneers / Anterior crowns – layered Layering area Applying the IPS Empress Esthetic Veneer materials Cut-back technique Prepairing for veneering Wash firing Incisal/ Transpa firing Finishing and prepairing for stain and glaze firing L

Stain and glaze firing Result

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Veneers / anterior crowns – Layering area

Veneer

Frontzahnkrone

Fully anatomical, milled veneer and anterior crown, which are reduced in the incisal area.

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Veneers / anterior crowns layered – Applying the IPS Empress Esthetic Veneer materials

Given the 2 : 1 effect of the wash pastes, i.e. bonding and characterization in one step, highly aesthetic restorations can be fabricated very efficiently.

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Veneers / anterior crowns layered – Applying the IPS Empress Esthetic Veneer materials IPS Empress Esthetic Veneer Incisal Opal  Incisal-like fluorescence and true-to-nature opalescence  High stability  Excellent modelling properties  Low, medium and high translucent IPS Empress Esthetic Veneer Incisal  Additional characterizations in the incisal third  3 shade nuances IPS Empress Esthetic Veneer Transpa  True-to-nature reproduction of transparent areas  2 shade nuances

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Veneers / anterior crowns layered – Applying the IPS Empress Esthetic Veneer materials IPS Empress Esthetic Veneer Chroma Modifier  Support the shade intensity of the reduced restorations

IPS Empress Esthetic Veneer Brightener  Used to increase the brightness value

IPS Empress Esthetic Veneer Build-Up Liquid  Used to mix the materials

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Veneers / anterior crowns – Cut-back technique

Before the cut-back the veneer or anterior crown should correspond with the final tooth shape.

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Fabricate a palatal silicone key.

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Veneers / anterior crowns layered – Cut-back technique

The control die made of IPS Natural Die Material is the optimum basis for sound shade reproduction.

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Too much pressure and excess heat development during cut-back must be prevented.

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Veneers / anterior crowns layered – Cut-back technique

Step 1: Proximal cut-back – the mesial and distal ridges are reduced.

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Step 2: Labial/incisal cut-back – volume and length are tapered and reduced.

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Veneers / anterior crowns layered – Cut-back technique

Step 3: Mamelon cut-back – design life-like mamelons using abrasive silicone disks.

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Completed cut-back of the incisal third.

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Veneers / anterior crowns layered – Prepairing for veneering

Blast the restoration with Al2O3 at 0.5 bar pressure (Caution: abrasive)

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Clean the restoration with ultrasound in a water bath or using the steam jet

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Veneers / anterior crowns layered – Wash firing

Apply IPS Empress Esthetic Veneer Wash Paste neutral thinly on the entire surface to be veneered, in order to enable an optimum bond.

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Apply mamelons and internal effects.

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Veneers / anterior crowns layered – Wash firing

Place restorations on the honey-comb firing tray and fire.

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Veneers / anterior crowns layered – 1st Incisal/ Transpa firing

Build up the materials in accordance with the reduction.

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

For a life-like incisal third, combine various materials and layer.

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Veneers / anterior crowns layered – 2nd Incisal/ Transpa firing

Complete the tooth shape with the 2nd firing and fire using the firing parameters below.

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Veneers / anterior crowns layered – Finishing and prepairing for stain and glaze firing

Finish the restoration with diamonds and give it a true-to-nature shape and surface structure.

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Veneers / anterior crowns layered – Stain and glaze firing

Clean restoration with ultrasound in a water bath or using the steam jet.

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Evenly apply the glazing material to the entire outer surfaces of the restoration.

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Veneers / anterior crowns layered – Stain and glaze firing

Apply the mixed Shades directly into the unfired glazing material layer.

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Completely layered IPS Empress CAD crown and veneer fabricated in the cut-back technique.

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD Veneers / anterior crowns – Result

IPS Empress CAD and IPS Empress Esthetic Veneer – the ideal combination for highly aesthetic, CAD/CAM fabricated restorations.

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD General information Prepairing for cementation Firing parameters Combination tables

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD General information – Prepairing for cementation

Conditioning of the ceramic surface in preparation for cementation is decisive for generating a sound bond between the bonding material and the all-ceramic restoration. Leucite-reinforced glass-ceramic materials are generally etched with IPS Ceramic Etching Gel and subsequently silanated using Monobond-S.

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD General information – Prepairing for cementation IPS Empress CAD

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD General information – Firing parameters Firing of leucite-reinforced glass-ceramic restorations 

Always use the honey-comb firing tray to fire the restorations.

Support inlays, onlays, and partial crowns with a firing pillow and place them on the honey-comb firing tray.

Place veneers as well as anterior and posterior crowns on metal pins and position them on the honey-comb firing tray.

As an alternative to the firing pillow and to better secure the restoration on the metal pins (particularly with veneers), a small amount of IPS Object Fix may also be used.

The firing temperatures must be observed at all times. Increasing the firing temperature will result in severe vitrification between the framework and the veneering ceramic, which may lead to crack formation later on.

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD General information – Firing parameters Firing of leucite-reinforced glass-ceramic restorations - Continuation 

Depending on the working habits, the glaze and stain firing procedures may also be conducted with a temperature increase rate of 60 °C/108 °F per minute.

If a vacuum pump is available, the stain and glaze firing procedures may also be carried out with a vacuum in place.

Restorations supported with a firing pillow on the honey-comb tray are exposed to less heat due to their lower position in the firing chamber. In order to achieve a true-to-nature gloss nonetheless, it is recommended to extend the holding time from 1 minute to 2 minutes.

The firing parameters specified in this Instructions for Use are coordinated with the Ivoclar Vivadent ceramic furnaces (tolerance range ±10 °C/18°F).

If furnaces other than those from Ivoclar Vivadent are used, temperature adjustments may be necessary.

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD General information – Firing parameters

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


CAD

IPS Empress CAD

Product information

Overview of the treatment procedure

Inlays/ Onlays polished

Inlays/ Onlays stained

Veneers/ anterior and posterior crowns Veneers / anterior stained crowns - layered

General information


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.