Modular Mailrooms for Efficient Work Flows by eBrochure

Modular Furniture for efficient Mail Rooms

Contents The Concept of Modular Mailroom Furniture The Document Flow Cycle Planning the efficient Mailroom Rough Sorting Benchwork: Series 90 Heavy Duty Benches (supplied assembled). Series XYZ Contract Benches (supplied flat packed). Fine Sorting: Flexibuild Sort (and Direct Sort shelves and bags) Compass Clearview Custom Security Post boxes Internal Distribution: Classic Trolleys GT Trolleys Satellite Hubs: Clearview External Distribution: Sackholders Roll Containers Storage Systems: Quartermaster Flexirail Small office Systems: Office Mail Centre Accessories: Flexibuild Labelling Trolley File Separation

2 3 4 5 6 7-8 9-10 11 13 14 14 15 16 17 18 19 20 21 22 23 23

The Concept of Modular Mailroom Furniture The furniture selection and planning lay-out of “The Post Room” is overlooked to your detriment. Mailrooms, Facilities Hubs or Office Services Environments, are the glue that keep an office running effectively and the larger the organisation the more essential the efficiency and ergonomic effectiveness of the back office. A well-planned mailroom can improve document flow, monitor activity levels, provide supplementary facilities services such as stationery or consumables distribution, provide a location and a labour resource for remote reprographics and in-house document publishing, or act as the hub for electronic document management digitising, direct marketing control, customer relationship management or office security. As the pressure of internal and incoming postage distribution diminishes, owing to the use of e-mail or cloud-based template completion, it is easy to imagine that the volume of work in a Mailroom has commensurately decreased. However, the development of new communications methodologies in the general office have often coincided with a decrease in labour capacity in the mail room and an increase in additional functionality and responsibility for the remaining employees. This puts pressure on the efficiency of Office Services and in turn demands an optimum lay-out plan. In these challenging and changing times new technological breakthroughs appear almost on a weekly basis that threaten the construct that physical post is still an important part of the communications equation. Of course for all companies the proportion of physical to electronic post has certainly changed, although the required space required to efficiently sort, distribute, collect, frank and send information through a physical information flow may not have done so. The volume may have diminished, but the actions required still remain. There is now all the more reason to select a furniture layout that is flexible, reconfigurable, recyclable and robust enough to be re-usable by moving from location to location. The alternative? Perhaps you could build a permanent set of joinery-contracted workstations and benches for contemporaneous requirements…………and then knock them down and re-build them in a year’s time when advances in technology change the method of document flow once again. This would of course be a costly waste of resources. However, for any workplace it is important to have an understanding of The Document Flow Cycle.

The Document Flow Cycle

Before planning a Mailroom, consider the Document Flow Cycle and the physical distribution and re-distribution of documents: • The mailroom location within the building. • The flow of mail - incoming and outgoing. • Efficiency of movement within the mailroom. • Distribution of mail throughout the building. • The required furniture and equipment.

The Document Flow Cycle Potential distribution actions: Distribution and Collection

Key: Green = Incoming Mail Red = Outgoing Mail

❼ To/From departments or satellite hubs

Good Flow needs Good Planning

Fine Sort

Intermediate Sort

❺

❽

into sorting frames (pigeon holes)

internal and external distribution of mail Physical Transfer

❻ distribution to departments /offices

Bench work

Final Sort

Mail Room

❹

❾ 1st/2nd Class, Special Delivery or Courier

Extract contents : sort into boxes or baskets Rough Sort

External Distribution

❷

⓫

Sort mail by size or destination

Sort into groups for mail type & destination

Bench Work

Weigh and Frank

❸

❿

Letter opening & date stamping

all outgoing mail for Royal Mail or Courier

Incoming Mail

Outgoing Mail

❶

⓬

Royal Mail & Branch Network

Planning the efficient Mailroom

The Office Services or Mailroom space plan requires a careful consideration of mail routings in order to maximise efficiency. Planning the furniture and equipment in different ways can affect productivity significantly. Illustrated below are examples of ‘Bad Work Flow’ (left) where the mail and staff cross back and forth, to be compared against ‘Good Work Flow’ (right) where the mail flows smoothly and unobstructed through the mailroom from start to finish. In this example we are showing a large and regularly-proportioned room although many companies are unable to provide this consideration. Take time to consider a simple equation by calculating time saved from good workflow and good ergonomics; two minutes saved every hour saves more than one week of total time every year. Appropriate furniture and a good layout can help to realise this equation, reduce costs, increase efficiency or productivity and maintain order in a safe and tidy environment.

Bad Work Flow.

Good Work Flow.

Mailroom plan view illustrating ‘Bad Work Flow’

Mailroom plan view illustrating ‘Good Work Flow’

Mailroom isometric view illustrating ‘Bad Work Flow’

Mailroom isometric view illustrating ‘Good Work Flow’

Rough Sorting

Rough Sorting is the process of dividing the total post received into large sub-sections or batches; for onward distribution and fine sorting at other branches, mail hubs or into ancillary fine sort compartments. Larger offices might devote specific furniture or locations to Rough Sorting, as opposed to using free space on a bench.

Rough Sort Table An ideal solution for the busy mailroom, the Rough Sort Table top can be divided to reveal 2 rows of baskets into which post can be quickly sorted. Once completed the table top panels simply slide together to allow extraction of the baskets and to provide a general work surface for everyday tasks. Features: • Sturdy removable baskets with cut out handles. • Optional 8-basket or 12-basket versions. • Unit includes bottom shelf for additional storage. • Fitted with 4 nylon non-marking castors for mobility. • Including 2 braked castors for stability. • Locking mechanism in the open or shut position. • 900mm Standing height for optimum ergonomic benefit. • Four radial corners to prevent any snagging of clothing, and to promote health and safety. Dimensions: • • • •

8 basket unit 12 basket unit Table top panels Overall closed width

• Baskets:

1600mm (L) x 900mm (W) x 900mm (H). 2200mm (L) x 900mm (W) x 900mm (H). 450mm (W) each. 900mm.

290mm (W) x 300mm (D) x 300mm (H).

Rough Sort Table (Choose from two sizes) Description 8 basket unit: 1600mm (L) x 900mm (W) x 900mm (H) 12 basket unit: 2200mm (L) x 900mm (W) x 900mm (H) Additional basket:

Model Code 3RSTABLE8 3RSTABLE12 3RSBASKET8

Rough Sort Waterfall Units For a non-mobile, semi-permanent rough sort area, many customers prefer a banked row of down-sloping baskets on a waterfall rough sort unit. The baskets are removable and can be quickly swapped onto post trolleys for internal deliveries once rough sorting is completed – perhaps for delivery to a departmental or office hub for fine sorting, or for collation of outgoing branch mail. Features • Suitable for Rough Sorting or Outgoing Mail Collection. • Flexible design accommodates baskets, sort boxes or Royal Mail letter trays. • Available as a single column that can be bolted together – Baskets ordered separately. • Can be bolted together in a single line or back-to-back. Dimensions • 521mm (W) x 1162mm (H) x 600mm (D) Rough Sort Waterfall Frame Description Waterfall Unit Frame Baskets for Frame (Each)

Model Code 3WFU 3TCB5

Bench Work

Benches provide the main structural furniture elements of an Office Services environment or Mail Room. As well as providing storage opportunities underneath the top surfaces, raised cupboards, lockers and shelves can provide for easy cleaning or location of errant envelopes. Benches can be desk height for seated operatives or at a standing height – ensuring optimum ergonomic comfort for mail sorters. Benches are usually kept free of clutter to allow for Rough Sorting, letter opening or date receipt stamping, but also form the ideal base structure for the addition of fine sort units or inserting and franking equipment. There is a need for these units to be stable and hard-wearing. A modular construction also provides the opportunity for reorganisation and reconfiguration.

Envosort have manufactured the Series 90 and Series C Bench ranges as the basic structure of Mail Room Furniture Lay-out for many years. Nothing else available today provides such an outstanding combination of ergonomic suitability, strength and durability, great design and value-for-money.

Construction Bench frames are a bolt-together assembly using M10 high tensile socket-head bolts with locking washers and spacers. Panels are fitted together with cam and pin fixings where required in cupboards and lockers.

Features: • All units are constructed with rugged steel frames. • Splinter-proof tops made from 28mm furniture grade wood chipboard, faced with smart grey laminate and with Dark Grey PVC edges. • Benches are available in four standard lengths. • All benches are fitted with adjustable feet for levelling on uneven floor surfaces. • Also available are free standing corner units, ideal for filling in corners where you have a run of benches/cupboards, a great health and safety solution. • Corner units and over-lapping rear edges allow for skirting boards so that tops can fit flush to the wall. • Upstands can be made to circumscribe the surface edges; this prevents the escape of letters, papers or pens etc.

Components Legs: Welded construction from 50mm x 25mm x 2mm mild steel tube verticals and 50mm x 25mm x 1.6mm horizontal tubes. Legs are fitted with 6mm mild steel plates welded into the bottom of vertical tubes, drilled and tapped M10 for fitting of adjustable feet. Epoxy-coated Grey (BS00A01).

Dimensions: • 900mm, 1200mm, 1500mm and 1800mm length tops. • (We can also produce custom units any length up to 1950mm). • Choose from 750mm (sitting) or 900mm (standing) heights (We would recommend standing rather than sitting as this is the most productive and ergonomic way of mail sorting). • Standard bench tops in choice of 750mm and 900mm depths.

FSC Certification • All tops and panels are from FSC-certified suppliers with chain of custody.

Bench Work installation.

Rails: Constructed from 50mm x 25mm x 1.6mm or 2mm (depending on length) mild steel tube. Welded into each end is a 6mm plate, drilled and tapped M10 for assembly. Top rails are pre-drilled to accept bolts for fixing work tops. Bottom rails are pre-drilled to accept bottom shelf supports if required. Epoxy coated Grey (BS00A01). Tops and Upstands: Manufactured from 28mm thick furniture grade wood chipboard of 650kg/m3 density to C1AE1. Top surface of high pressure splinter-proof decorative laminate (HPL) to ISO4586:1997 and EN438:1991 (Formica Folkestone 7927 to NCS ref 2500 - Pantone 14.4501 - BS00103) with balancing laminate to underside. All edges have 3mm thick Dark Grey bonded edging. Top fixed to frame with 6 x M6 brass ferrule inserts pre-fitted to underside of top. Panels: Manufactured from 18mm thick furniture grade double sided Grey melamine faced wood chipboard of 650kg/m3 density to C1AE1. All edges have either 1mm or 3mm thick edging in matching colour.

Health & Safety Feature: Rounded corners can be supplied in critical areas. Order tops to have an increased width of 150mm to achieve 1 radial corner.

For enhanced mailroom flexibility, all units can be supplied with 2 braked and 2 unbraked castors.

Benches are supplied flat packed. An installation service is also available – call 01494 686500 for details.

Bench Work

Series 90 Heavy Duty Modular Benches Series 90 Heavy Duty Modular Benches are designed to offer a robust and long-lasting work surface and/or storage solution for ergonomic and efficient operations. The units are available as an Open Bench (BEO), an Open Bench with a Bottom Shelf (BEB), an Open Cupboard with a Centre Shelf (BES), a Cupboard with Sliding Lockable Doors (BEC), a Bench over 4 or 6 Locker Units (BEL), Mobile Bench Units (BEMU) and Mobile Pedestals (BEMPED). Benches are available at Sitting Height A (750mm) and Standing Height B (900mm) for ergonomic working, and in 2 depths – 750mm (Standard) and 900mm (Extra). The rear of the top surfaces overhangs the 600mm frame; the units can then be placed against walls with pipes or deep skirting boards for example. The under-bench storage areas are “off the floor” to allow for cleaning or post retrieval. Also available are freestanding corner units, ideal for filling in corners where you have a run of benches/cupboards. Corner units allow for skirting so tops fit flush to the wall. Open Bench (BEO) Exceptional strength and stability with open storage below. Description Sitting Height - 900mm Long Sitting Height - 1200mm Long Sitting Height - 1500mm Long Sitting Height - 1800mm Long

Standard Depth 750mm 3BEO90A 3BEO120A 3BEO150A 3BEO180A

Extra Depth 900mm 3BEO90AEW 3BEO120AEW 3BEO150AEW 3BEO180AEW

Standing Height Standing Height Standing Height Standing Height

3BEO90B 3BEO120B 3BEO150B 3BEO180B

3BEO90BEW 3BEO120BEW 3BEO150BEW 3BEO180BEW

- 900mm Long - 1200mm Long - 1500mm Long - 1800mm Long

Open Bench with Bottom shelf (BEB) Full size lower shelf adds off-the-floor storage and further increases structural stability. Description Standard Depth Extra Depth 750mm 900mm Sitting Height - 900mm Long 3BEB90A 3BEB90AEW Sitting Height - 1200mm Long 3BEB120A 3BEB120AEW Sitting Height - 1500mm Long 3BEB150A 3BEB150AEW Sitting Height - 1800mm Long 3BEB180A 3BEB180AEW Standing Height - 900mm Long Standing Height - 1200mm Long Standing Height - 1500mm Long Standing Height - 1800mm Long

3BEB90B 3BEB120B 3BEB150B 3BEB180B

3BEB90BEW 3BEB120BEW 3BEB150BEW 3BEB180BEW

Open Cupboard with Centre Shelf (BES) With both end and back panels plus a second shelf for enhanced storage. Description Standard Depth Extra Depth 750mm 900mm Sitting Height - 900mm Long 3BES90A 3BES90AEW Sitting Height - 1200mm Long 3BES120A 3BES120AEW Sitting Height - 1500mm Long 3BES150A 3BES150AEW Sitting Height - 1800mm Long 3BES180A 3BES180AEW Standing Height - 900mm Long Standing Height - 1200mm Long Standing Height - 1500mm Long Standing Height - 1800mm Long

3BES90B 3BES120B 3BES150B 3BES180B

3BES90BEW 3BES120BEW 3BES150BEW 3BES180BEW

Bench Work

Cupboard with Sliding Locking Doors (BEC) Fully-enclosed standard bench with end panels, centre shelf and lockable sliding doors. Description Sitting Height - 1200mm Long Sitting Height - 1500mm Long Sitting Height - 1800mm Long

Standard Depth 750mm 3BEC120A 3BEC150A 3BEC180A

Extra Depth 900mm 3BEC120AEW 3BEC150AEW 3BEC180AEW

Standing Height - 1200mm Long Standing Height - 1500mm Long Standing Height - 1800mm Long

3BEC120B 3BEC150B 3BEC180B

3BEC120BEW 3BEC150BEW 3BEC180BEW

Bench over 4/6 Locker Units (BEL) Organised, secure storage for supplies, equipment or mailroom staff personal possessions. Description Standard Depth Extra Depth 750mm 900mm Sitting Height - 1200mm Long (4 Units) 3BEL120A 3BEL120AEW Sitting Height - 1500mm Long (6 Units)

3BEL150A

3BEL150AEW

Standing Height - 1200mm Long (4 Units) 3BEL120B

3BEL120BEW

Standing Height - 1500mm Long (6 Units) 3BEL150B

3BEL150BEW

Mobile Bench Unit (BEMU) Here the name of the game is flexibility. Four robust rubber castors (2 braked) enable units to be located wherever required, allowing the mailroom layout to be reconfigured for various tasks. Description Standard Depth Extra Depth 750mm 900mm Sitting Height - 1200mm Long 3BEMU120A 3BEMU120AEW Sitting Height - 1500mm Long 3BEMU150A 3BEMU150AEW Sitting Height - 1800mm Long 3BEMU180A 3BES180AEW Standing Height - 1200mm Long Standing Height - 1500mm Long Standing Height - 1800mm Long

3BEMU120B 3BEMU150B 3BEMU180B

3BEMU120BEW 3BEMU150BEW 3BEMU180BEW

Radius corners and Upstands (in 100mm or 150mm heights and 750mm, 900mm, 1200mm, 1500mm or 1800mm lengths) are advised for mobile units. Please contact our sales office for further information.

Mobile Pedestals. Choose from 2 or 3 drawer units. All drawers have a common lock. Description 2 drawer unit, 1 deep and 1 standard drawer. 3 drawer unit, 3 standard drawers.

Code 3BEMPED5A 3BEMPEDLM3A

Bench Work

Series 90 – Contract Benches Series 90 – Contract Benches have all the features of our highly regarded Series 90 Heavy Duty product line except that the top surfaces are 25mm grey melamine faced chipboard (MFC) but with Blue PVC edges. More cost-conscious customers have seen this option as a necessary addition to our range, and so Series 90 Contract copies the product format of Series 90 Heavy Duty Benches. The units are available as an Open Bench (CEO), an Open Bench with a Bottom Shelf (CEB), an Open Cupboard with a Centre Shelf (CES), a Cupboard with Sliding Lockable Doors (CEC), a Bench over 4 or 6 Locker Units (CEL), and Mobile Bench Units (CEMU). Benches are available at Sitting Height A (750mm) for desk work, and Standing Height B (900mm) for ergonomic working, and in 2 depths – 750mm (Standard) and 900mm (Extra). The rear of the top surfaces overhangs the frame; the units can then be placed against walls with pipes or deep skirting boards. The under-bench storage areas are “off the floor” to allow for cleaning or post retrieval. Also available are freestanding corner units, ideal for filling in corners where you have a run of benches/cupboards. The Corner units allow for skirting so that the tops fit flush with the wall. Open Bench (CEO) Exceptional strength and stability with open storage below. Description Sitting Height - 900mm Long Sitting Height - 1200mm Long Sitting Height - 1500mm Long Sitting Height - 1800mm Long

Standard Depth 750mm 3CEO90A 3CEO120A 3CEO150A 3CEO180A

Extra Depth 900mm 3CEO90AEW 3CEO120AEW 3CEO150AEW 3CEO180AEW

Standing Height - 900mm Long Standing Height - 1200mm Long Standing Height - 1500mm Long Standing Height - 1800mm Long

3CEO90B 3CEO120B 3CEO150B 3CEO180B

3CEO90BEW 3CEO120BEW 3CEO150BEW 3CEO180BEW

Open Bench with Bottom shelf (CEB). Full size lower shelf adds off-the-floor storage and further increases structural stability. Description Standard Depth Extra Depth 750mm 900mm Sitting Height - 900mm Long 3CEB90A 3CEB90AEW Sitting Height - 1200mm Long 3CEB120A 3CEB120AEW Sitting Height - 1500mm Long 3CEB150A 3CEB150AEW Sitting Height - 1800mm Long 3CEB180A 3CEB180AEW Standing Height - 900mm Long Standing Height - 1200mm Long Standing Height - 1500mm Long Standing Height - 1800mm Long

3CEB90B 3CEB120B 3CEB150B 3CEB180B

3CEB90BEW 3CEB120BEW 3CEB150BEW 3CEB180BEW

Open Cupboard with Centre Shelf (CES) With end and back panels plus a second shelf in order to enhance storage. Description Standard Width Extra Width 750mm 900mm Sitting Height - 900mm Long 3CES90A 3CES90AEW Sitting Height - 1200mm Long 3CES120A 3CES120AEW Sitting Height - 1500mm Long 3CES150A 3CES150AEW Sitting Height - 1800mm Long 3CES180A 3CES180AEW Standing Height - 900mm Long Standing Height - 1200mm Long Standing Height - 1500mm Long Standing Height - 1800mm Long

3CES90B 3CES120B 3CES150B 3CES180B

3CES90BEW 3CES120BEW 3CES150BEW 3CES180BEW

Bench Work

Cupboard with Sliding Locking Doors. Fully-enclosed standard bench with end panels, centre shelf and lockable sliding door access. Cupboards are available with tambour doors to order. Description Standard Width Extra Width 900mm 750mm Sitting Height - 1200mm Long 3CEC120A 3CEC120AEW Sitting Height - 1500mm Long 3CEC150A 3CEC150AEW Sitting Height - 1800mm Long 3CEC180A 3CEC180AEW Standing Height - 1200mm Long Standing Height - 1500mm Long Standing Height - 1800mm Long

3CEC120B 3CEC150B 3CEC180B

3CEC120BEW 3CEC150BEW 3CEC180BEW

4/6 Locker Units. Organised, secure storage for supplies, equipment or mailroom staff personal possessions. Description Standard Width Extra Width 750mm 900mm Sitting Height - 1200mm Long (4 Locker) 3CEL120A 3CEL120AEW Sitting Height - 1500mm Long (6 Locker)

3CEL150A

3CEL150AEW

Standing Height - 1200mm Long (4 Locker) Standing Height - 1500mm Long (6 Locker)

3CEL120B

3CEL120BEW

3CEL150B

3CEL150BEW

Mobile Unit. Here the name of the game is flexibility. Four robust rubber castors (2 braked) enable units to be located wherever required, allowing a mailroom layout to be reconfigured for various tasks. Upstands not included (available as option). Description Standard Width Extra Width 750mm 900mm Sitting Height - 1200mm Long 3CES120A 3CES120AEW Sitting Height - 1500mm Long 3CES150A 3CES150AEW Sitting Height - 1800mm Long 3CES180A 3CES180AEW Standing Height - 1200mm Long Standing Height - 1500mm Long Standing Height - 1800mm Long

3CES120B 3CES150B 3CES180B

3CES120BEW 3CES150BEW 3CES180BEW

Radius corners and Upstands (in 100mm or 150mm heights and 750mm, 900mm, 1200mm, 1500mm or 1800mm lengths) are advised for mobile units. Please contact our sales office for further information.

Mobile Pedestals. Choose from 2 or 3 drawer units. All drawers have a common lock. Description 2 drawer unit, 1 deep and 1 standard drawer. 3 drawer unit, 3 standard drawers.

Code 3CEMPED5A 3CEMPEDLM3A

Fine Sorting

Fine sorting is usually completed using modular compartments or pigeon holes. These can be bench mounted, above bench mounted or wall mounted depending on the specific requirements and space available. Choose from our Flexibuild, Compas, Clearview or Custom Post Boxes depending on your requirements.

Flexibuild Modular Sorting System The optimum instant solution for equipping today’s busy mailroom or office, our modular Flexibuild system easily assembles into height-adjustable compartments for sorting mail, sales literature or record filing. The plastic-coated wire mesh frames provide a clear view of the contents so that letters, message slips or small envelopes cannot get overlooked or mislaid.

Standard Modules in 2 heights and a choice of 4 widths. Shelves can be adjusted in 25mm vertical pitches.

The starter kits contain 18 or 24 compartments delivered in selfassembly flat packs. Extra shelves and columns (offered separately) can be added. Flexibuild Sort Units can be placed directly onto a bench, wall-mounted using Flexirail, or elevated with an open base that maximises work space, leaving room below the unit for franking machines etc. The sort units easily configure to suit any available space.

Additional columns can be added to any unit of the same height and depth. Additional shelves are also available.

Flexibuild can be configured to provide access from both sides of the units.

A4 Easi Sort (Starter Kit) - using a shelf slightly wider than an A4 envelope Choose from two heights of 3 columns – 915mm or 1016mm: Description 18 Compartment : 318mm (Shelf W) x 343mm (Shelf D) x 915mm (H) Additional Column to make 6 extra Compartments *

Code 3SCS03 3SCS03EC

24 Compartment : 318mm (Shelf W) x 343mm (Shelf D) x 1016mm (H) Additional Column to make 8 extra Compartments*

3SCS06 3SCS06EC

Extra shelves (Pack of 5)

3SCSV3/PK5

* An additional column consists of one side frame, one rear panel and 6 or 8 shelves.

The total width of the assembled A4 Easi Sort Starter Kit is 1021mm. Each additional column adds 324mm width.

A4 Exact (Starter Kit) – using a narrower shelf that is exactly A4 paper size Choose from two heights of 3 columns – 915mm or 1016mm: Description 18 Compartment: 241mm (Shelf W) x 343mm (Shelf D) x 915mm (H) Additional Column to make 6 extra Compartments*

Code 3SCS02 3SCS02EC

24 Compartment: 241mm (Shelf W) x 343mm (Shelf D) x 1016mm (H) Additional Column to make 8 extra Compartments*

3SCS05 3SCS05EC

Extra shelves Pack of 5

3SCSV4/PK5

* An additional column consists of one side frame, one rear panel and 6 or 8 shelves.

The total width of the assembled A4 Exact Starter Kit is 776mm. Each additional column adds 247mm width.

Fine Sorting

Extra Wide (Starter Kit) - using a shelf that can accommodate A4 widthways. Choose from two heights of 3 columns – 915mm or 1016mm: Description 18 Compartment: 406mm (Shelf W) x 343mm (Shelf D) x 915mm (H) Additional Column to make 6 extra Compartments *

Code 3SCS09 3SCS09EC

24 Compartment: 406mm (Shelf W) x 343mm (Shelf D) x 1016mm (H) Additional Column to make 8 extra Compartments *

3SCS10 3SCS10EC

Extra shelves Pack of 5

3SCSV16/PK5

* An additional column consists of one side frame, one rear panel and 6 or 8 shelves. The total width of the assembled Extra Wide Starter Kit is 1271mm. Each additional column adds 412mm width.

Extra Deep (Starter Kit) – using a shelf that can hold A3 files and paper. Choose from two heights of 3 columns – 915mm or 1016mm: Description 18 Compartment: 318mm (Shelf W) x 457mm (Shelf D) x 915mm (H) Additional Column to make 6 extra Compartments *

Code 3SCS07 3SCS07EC

24 Compartment : 318mm (Shelf W) x 457mm (Shelf D) x 1016mm (H) Additional Column to make 8 extra Compartments *

3SCS08 3SCS08EC

Extra shelves Pack of 5

3SCSV3A/PK5

* An additional column consists of one side frame, one rear panel and 6 or 8 shelves.

Direct Sort Shelves for Security Bags Direct Sort Shelves Specially designed to fit inside Flexibuild units, sturdy Security Bags save time and hassle for confidential mail. The top lip of the Security Bag clips over a welded handle fitted on the underside of the shelf above. The shelves need to be purchased separately and are the same size as our standard units. Description A4 Easi-Sort Shelf (Pack of 5) Extra Wide Shelf (Pack of 5) Extra Deep Shelf (Pack of 5) All dimensions in millimetres

Code 3SCSV3ERP/PK5 3SCSV16ERP/PK5 3SCSV3AERP/PK5

Width 318 406 318

The total width of the assembled Extra Deep Starter Kit is 1021mm. Each additional column adds 324mm width.

Depth 343 343 457

Security Bags Security Bags • Fit into Flexibuild Direct Sort Shelves for sorting directly into the bag. • Heavy-duty mailing pouch manufactured from PVC-coated polyester. • Super-tough construction keeps post tidy and secure. • Securable with Polyseals (plain and numbered) for tamper-evident protection. • Available in 4 colours for colour coding; Orange, Blue, Green , Red Description A4 Security Bags Extra Wide Security Bags Extra Deep Security Bags All dimensions in millimetres

Code 1XE230A 1XE223A 1XE224A

Width 300 400 300

Depth 330 330 450

Height 130 130 130

Direct Sort Shelves for Security Bags have been developed as part of the Flexibuild System.

Fine Sorting Compass Sort Units Compass Sort Units represent the smartest solution for sorting mail and paper management. Combining style and design with massive practicality, a Compass Sort Unit is ideal for use within a central mailroom, satellite hub or post-point area, marketing departments, prestigious reception areas or open plan offices. Units can be placed directly onto a bench, wall-mounted using Flexirail, or elevated with an open base that maximises work space, leaving room below the unit for franking machines etc. Compass features: • Stylish design and premium quality for workplaces where a smart, modern environment is important. • Adjustable shelves in 25mm increments allowing for configuration to user requirements. • Sturdy mild steel frame construction with a tough powder coated finish; fully bolted panels and dividers. • Stylish curved profile tops and back panels made from vacuum formed plastic. • Sculptured shelves with an integral labelling system.

A 3-column Bench Mounted Compass Sort Unit with 18 compartments.

A 4-column Compass Open Base Sort Unit with 20 compartments.

A Compass width-fitting shelf. These can be reconfigured for narrow (235mm) or wide (295mm) columns. Description

Compartments Code

Open Base Sort Units. Single Column Open Base Unit Single Column Open Base Unit 2 Column Open Base Unit 2 Column Open Base Unit 4 Column Open Base Unit 4 Column Open Base Unit 5 Column Open Base Unit 5 Column Open Base Unit

3 (A4) 5 (A4) 6 (A4) 10 (A4) 12 (A4) 20 (A4) 15 (A4) 25 (A4)

Bench Mounted Units. 3 Column Bench Mounted 4 Column Bench Mounted 5 Column Bench Mounted

18 (A4+) 24 (A4+) 30 (A4 only)

Extra Shelves Pack of 5 (complete with labels and holders)

Shelf Width in mm

Height in mm

Width in mm

Depth in mm

3U1C/3NC 3U1C/5NB 3U2C/6NC 3U2C/10NB 3U1200/12/WC 3U1200/20/WB 3U1200/15/NC 3U1200/25/NB

235 235 235 235 295 295 235 235

645 1005 645 1005 645 1005 645 1005

255 255 490 490 1200 1200 1200 1200

400 400 400 400 400 400 400 400

3U900/18/WA 3U1200/24/WA 3U1200/30/NA

295 295 235

1005 900 400 1005 1200 400 1005 1200 400 All dimensions in millimetres

3ZUS/003/PK5 for 235mm

3ZUS/004/PK5 for 295mm

Fine Sorting

Clearview Sort Units The Clearview Concept: configurable sorting shelves in a strong MFC cabinet. Made from sturdy transparent acrylic, Clearview shelving provides one of the most efficient ways to sort mail and store documents. Because you can see straight through each shelf no important letters or documents need be overlooked – and as the clear shelves are also easily adjustable within the vertical columns, you can configure the size and layout of the units to your needs. What’s more, scalloped edge front slots make it easy to label each compartment. • Each unit holds a maximum capacity of 36 shelves, to create 40 separate compartments - each 335(d) x 277(w) (A4) and 100(h) mm – or you can opt for fewer compartments with a larger capacity. 16 shelves are included as standard. • The wooden frame is made from 18mm melamine-faced chipboard (MFC) including the solid back panel; all panels finished in a Titanium Grey colour to complement our Series 90 range. • Overall dimensions of the unit: 1200(L) x 1048(H) x 360(D) mm.

Clearview with lockable tambour doors: the secure hideaway sorting solution. Where there is a need for greater security or just a preference to tidy things away out of sight, then Clearview sorting is available inside a 1500mm wide unit with lockable tambour doors, custom-designed to stand on a Series 90 bench or similar work surface. Tambour-door freestanding units can be ordered on their own or combined with Series 90 open benches or lockable cupboards. 16 shelves are included as standard. Additional Clearview shelves are available in packs of 5. Description

Shelves included 16 (max 40)

Code

Shelf Width 277

Length

Height

Depth

1200

1048

360

Clearview Sorting Unit and Series 90 Open Bench with bottom shelf Clearview Sorting Unit with tambour doors

16 (max 40)

3CVSUBEB120B

277

1200

1948

750

16 (max 40)

3CVSUTAMBOUR

277

1500

1048

470

Clearview Sorting Unit with tambour doors and Series 90 cupboard with sliding lockable doors

16 (max 40)

3CVSUTAMBEC150B

277

1500

1948

750

Extra shelves per pack of 5

3CVSU/SHELF/PK5

277

Clearview Sorting Unit

3CVSU/16

Custom Post Boxes Custom post boxes are configurable to your specific requirements. Each separate compartment locks with its own key (two supplied), enabling individual recipients to check and pick up their mail (Master keys are also available). Offered as individual boxes, the system can easily be augmented to meet changing needs. Below are our standard sizes. However, please contact our sales office for bespoke sizes which are also offered. • Made from sheet steel with hardwearing powder-coated Light Grey finish. • Boxes feature a clear Perspex label holder for easy identification. • Available with weather-proof cladding for sheltered outdoor locations. Custom Post Boxes Small Post Box Dimensions 280 (W) x 385 (D) x 110 (H) Medium Post Box Dimensions 280 (W) x 385 (D) x 220 (H) Large Post Box Dimensions 280 (W) x 385 (D) x 330 (H)

Code 3BOX110 3BOX220 3BOX330

Internal Distribution & Collection

An effective internal transportation of mail can be achieved by use of mailroom trolleys. These come in various designs and configurations depending on requirements and applications. The compartmentalisation of trolley baskets by using Concertina File Inserts held into place by steel rods allows for efficient segmentation and dissemination of internal mail for re-routing. In practice these trolleys are used in offices for movement between floors, hospitals for medical records, and many other applications and environments.

Our Classic Trolleys are available in two sizes; Minor and Senior. Both versions are designed for general/multi-purpose indoor use. The Minor Trolley is a versatile trolley, ideal for locations where space is at a premium. The Minor features two medium capacity nesting front hook-on baskets which can be easily removed from the fully-welded trolley frame - pre-fitted with a sheet steel base with rear lip for moving bulky items. Front swivel castors are bolted through the trolley frame. Rear wheels are fitted onto a solid axle. Capacity: 50Kg Max. Unladen weight: 15.5Kg Fully welded assembly from 40 x 20 x 1.6mm crush bent mild steel oval tube & formed mild steel sheet. Front swivel castors of 76mm diameter fixed with M10 high tensile zinc plated socket head bolts. Rear wheels of 200mm diameter solid rubber tyre on plastic rim, fixed with star-lock washer and cap trim. Frame Finish: Epoxy powder coated 'Post box' red.

The Senior Trolley is a stylish general purpose trolley and benefits from nonmarking buffering to the front and sides of the fully-welded trolley frame to protect doors and furniture. There are also revolving corner buffers above the front castors. It offers improved access to the two large capacity hook-on front baskets and optional rear pannier basket. All baskets are easily removable. Front swivel castors are bolted to solid tapped blocks which are welded into the trolley frame. Rear wheels are fitted inside the frame on stub axles. Capacity: 90Kg Max. Unladen weight: 27Kg. Fully welded assembly from 38 x 19 x 1.6mm and 25 x 13 x 1.6mm mild steel tube. Front swivel castors of 125mm diameter fixed with M10 high tensile zinc plated socket head bolts. Rear wheels of 200mm diameter solid rubber tyre on plastic rim, fixed with star-lock washer and cap trim. Frame Finish: Epoxy powder coated 'Post box' red.

Images above contents only.

Minor and Senior Handles are both fitted with black plastic comfort grips which are then bolted into place.

Baskets: Hook-on style manufactured from 75 x 25 x 2.6mm mild steel mesh with 6.3mm diameter rod framing around top edge. Front baskets are fitted with mild steel plates to each top corner to accommodate fitting of concertina file rods (see accessories on page 23). Minor and Senior baskets are different sizes and are not interchangeable between models. Finish: Nylon coated white.

Classic Trolleys

Code

Minor Trolley. Dimensions 740mm (L) x 520mm (W) x 1035mm (H) . Senior Trolley. Dimensions 855mm (L) x 590mm (W) x 1020mm (H)

3TRMIN 3TRSEN

illustrate

indicative

Internal Distribution & Collection

GT1, GT2 and GT3 Trolleys Our GT Trolleys are available in three sizes; GT1, GT2 and GT3. All three versions are designed for general/multi-purpose indoor and outdoor use. The GT1 trolley is a highly manoeuvrable versatile trolley ideal for locations where space is at a premium. The GT1 features two large capacity nesting baskets which can be easily removed from the trolley frame. The GT2 trolley is a medium size trolley. The GT2 features two large capacity nesting baskets which can be easily removed from the trolley frame. The top basket has a unique tilting mechanism allowing easier access to the bottom basket. Front baskets can be supplied lockable where further security is required. The GT3 trolley is available in a number of configurations for the distribution of mail, heavy parcels, medical records, etc. The GT3 features large diameter wheels and swivel castors in a diamond configuration so that the trolley can turn in its own length. Construction GT1 and GT2: Fully welded frame fitted with hook on baskets, two front and one optional rear pannier. Front swivel castors are bolted to trolley frame. Rear wheels are fitted onto solid stub axles. GT3: Fully welded frames assembled to suit options. Swivel castors and wheels are bolted to trolley frame. Components GT1 and GT2 Frame: Three welded components from 32mm diameter x 1.6mm mild steel tube. Finish: epoxy powder coated 'Gentian blue. Front plate fitted swivel castors of 125mm diameter fixed with high tensile zinc plated bolts. Rear wheels of 200mm diameter solid rubber tyre on black plastic rim, fixed with starlock domed washers. Front and sides of lower frame fitted with extruded non marking grade white buffering which is heat shrunk onto frame. GT3 Frame: Three welded components from 32mm diameter x 1.6mm mild steel tube. Finish: epoxy powder coated 'Gentian blue. Front and rear plate fitted swivel castors and central wheels of 200mm diameter fixed with high tensile zinc plated bolts. Sides and corner uprights of lower frame fitted with extruded non marking grade white buffering which is heat shrunk onto frame. All Baskets: Hook on style manufactured from mild steel mesh with 6.3mm diameter rod framing around the top edge. The GT1 & 2 has 75mm x 25mm x 2.6mm mesh while the GT3 has 50mm x 25mm x 2.6mm. Front baskets are fitted with mild steel plates to each top corner to accommodate fitting of concertina file rods (see accessories). Finish: Nylon coated white. Accessories Handle Grip, Laminate platform, Concertina filepacks, Rear pannier basket (GT1 & GT2 only), Lockable front baskets (GT2 & GT3 only), Divided basket (GT3 only) and 4 small baskets (GT3 only).

Compare specifications at a glance Load Capacity (kg) Upper basket capacity (kg) Lower basket capacity (kg) Trolley Size (mm) Basket Size (mm) Optional Rear pannier size (mm) Wheels (mm) Castors (mm) Product Code

GT1 80 (including pannier) 20 50 915(L) x 610(W) x 1000(H) 485(L) x 460(W) x 255(H) 130(L) x 460(W) x 350(H)

GT2 100 (including pannier) 30 60 1030(L) x 610(W) x 1000(H) 635(L) x 460(W) x 255(H) 130(L) x 460(W) x 350(H)

Heavy duty 200 125 3TRGT1/2

Heavy duty 200 125 3TRGT2/2

GT3 300 (platform version) 20 (long) 30 (short) 60 (long) 50 (short) 1200(L) x 610(W) x 1070(H) 960(L) x 425(W) x 255(H) long basket n/a Heavy duty 200 200 3TRGT3/2

Satellite Hubs Many organisations view the back-office rough and tumble of the mailroom environment as a functional necessity, but an ugly office area characterised by loose waste paper and noise. In the ordered calm of the general office floors, steel mesh is seen as being industrial or distracting in form. Satellite mail hubs, where users collect mail or leave it for collection, need to fit in with the quiet creative hum of the modern office through exuding a cool aesthetic and obvious function and form.

The Clearview Satellite Hub Sort Units evoke the essence of discretion. Post or correspondence that has been delivered or requires collection is immediately obvious through the transparent carcass of the Sort Unit sides and panels. Clearview shelves slide in and out of the five available positions to create 6 compartments per column. Each shelf has scalloped

front edge label holders that can identify each compartment.

The Satellite Hubs are available in a Single version (one column with 6 compartments) and Double version (with two columns and thereby 12 compartments. Of course, the units can also be grouped together if more compartments are required.

To complement the range a small 3-drawer unit is also available for smaller offices or departments. The shelves are of a different design.

Dimensions: Single Column measures Double Column measures Each compartment measures Removable shelves measure The 3-drawer unit measures

289mm(W) x 351mm(D) x 605mm(H) 577mm(W) x 351mm(D) x 605mm(H) 277mm(W) x 335mm(D) x 100mm(H) 283mm(W) x 343mm(D) 251mm(W) x 351mm(D) x 221mm(H)

Clearview Satellite Hub Sort Units

Code

Single Column (6 Compartments) including 5 shelves Double Column (12 Compartments) including 10 shelves

3CVCU6 3CVCU12

Small 3-drawer Unit

3CVCU3

External Distribution

Once the Mail designated for external distribution has been weighed and franked, it often needs to be correlated into First and Second Class sub-groups, or by designated couriers, prior to departure. Sack holders hold open the sacks, allowing them to be filled whilst still mobile, avoiding the need for a continuous lifting and opening action by operatives. These units can be manufactured in single units, double units or multiple groups – in-line or back-to-back – depending on the size of the mail requirement. Once the sacks are ready for distribution, or filled up during the day, they may need to be transferred to larger containers prior to collection. Standard or York Roll containers, designed specifically for Royal Mail letter trays, are a size that can be loaded directly onto postal or courier vans, or simply assist in the movement of multiple bags without disturbing the document flow into mail sacks held in sack holders. Robust and mobile sack holders feature in our Classic range. Designed to improve efficiency and handling of heavy sacks of mail or packages. Each of the range of Classic Sack Holders accommodates Royal Mail sacks and most standard sizes of sack. Sack suspension hooks are tucked neatly under the frame to avoid injury or snagging and yet are easy to access, and arranged so that sacks can be changed independently. The Classic Sack Holders are mobile on 4 heavy duty castors allowing for easier manual handling and manoeuvrability. Available as standard in a variety of sack configurations to suit any requirement; Single, Double, Triple and Four-in-line, but other combinations are possible. Dimensions: Height: 1045mm Depth: Single 400mm, (Back-to-back Double-depth option: 800mm) Width: Single 356mm, Double 693mm, Triple 1030mm or Four in line 1367mm. Hook Centres: 336mm x 330mm. Components Frame: Fabricated from 19mm x 19mm x 1.6mm mild steel tube and punched 1.6mm mild steel sheet, bolted together to suit the selected configuration. Castors: Heavy duty swivel castors of 75mm diameter, fixed with M10 high tensile zinc-plated socket-head bolts directly to the frame. Frame finish Epoxy powder coated 'Post box' red. Options: Identification label holder – specify when ordering; not retro-fitable. Mail sacks - sold separately.

Wall Mounted Classic Sack Holder • Easily attached to a wall – fixings included. • Ideal for smaller mailrooms. • Sack hangs from two suspension hooks. • Holds all standard sacks, including Royal Mail. • Dimensions: 350mm (w).

Classic Sack Holder Single Classic Sack Holder Double Classic Sack Holder Triple Classic Sack Holder Four-in-line Classic Sack Holder Classic Sack Holder Label Holder Wall Mounted Classic Sack Holder

Code 3TRSH1 3TRSH2 3TRSH3 3TRSH4IL 3TRSHLB 3WMSH

External Distribution Standard and York Roll Containers York Roll Container: Transports 28 Royal Mail letter trays. Created in conjunction with Royal Mail, this top-quality trolley is purpose-designed to carry no less than 28 Royal Mail letter trays stacked neatly inside its U-frame. When not in use, several trolleys can be nested for space saving storage. NB: letter trays not included. • • • • • • • •

500kg load capacity. Resilient 125mm rubber wheels (2 fixed, 2 swivel). Hardwearing galvanised finish protects against bumps. Maintenance-free self-adjusting parking brake, operated by hand. Heavy-duty polymer base. Includes snap-fit nylon webbing to secure high loads (Also available separately) External dimensions: 670mm(W) x 850mm(D) x 1500mm(H) Internal dimensions: 606mm(W) x 800mm(D) x 1286mm(H)

Standard Roll Container: Carries 600kg with ease, stores even easier. Simply fold up the steel base and swing in an end panel to create an L-shape that lets you nest several units together. • • • • • • • •

Very high 600kg load capacity. Sturdy construction of tubular steel with sheet steel base. 4 swivel 150mm rubber-tyred castors, two with bakes. Nestable for storage: lift up base and fold in end panel. Front bar holds 3 sides rigid in use. Hardwearing epoxy powder coating protects against bumps. Dimensions: 600mm(W) x 800mm(D) x 1690mm(H) Weight: 42kg unladen.

Product Description: Standard Roll Container York Roll Container York Container Retaining Strap

Code 3TRBB77 3TRYORK 3TRYORKSTRAP

Storage

In most Office Service environments there is a need for robust and hygienic Open Shelving – either for storage or as a transient Quartermaster holding area for larger stationery items or parcels. Modular shelving provides the opportunity to re-configure or re-organise if the need arises after a time. Space is almost always at a premium in this environment and so Wall Mounted Storage is also a method of optimising the prevailing space conditions. A flexible mounting system can help to create solutions for competing wall space needs – additional pigeon hole sort units, shelves, white boards, cupboards, maps etc.

Quartermaster System Quartermaster is constructed from zinc-chromate-coated steel for optimum performance. This modular racking system not only looks good but is also incredibly strong, easy to assemble and can be configured to suit your needs and the available space. Adjust the height of the shelves, attach whole bays together in straight rows, L shapes, U shapes or island units. Create your own custom modular storage solution - and all without tools. L configurations can be made without a corner post at the front by using link hooks on the return shelves, allowing clear access. Features: • A high quality Open Shelf storage system for offices, mailrooms, reprographic or print rooms, hospitals, schools, etc. • The upright posts form a strong frame that stays rigid even in single bays. Each post is height-adjustable for levelling. • Upright posts of 1700mm height can also be reduced if required. • Each shelf is adjustable in height in 50mm increments to allow for planning of storage for different sized items. • The zinc chromate coated steel construction has a safe smooth edge design. • Framed heavy gauge wire shelving allows good air flow and assists in preventing an accumulation of dust. • No tools are required for rapid self-assembly allowing storage areas to be created or adapted at will. Units can be easily augmented by adding additional bays. Starter Units: • Our standard Starter Kits consist of 4-tier units, with two shelf depth options of 450mm or 600mm; and 3 shelf width options of 900mm, 1200mm, or 1500mm. • Each kit comprises 4 shelves , 4 posts (1700mm high), and fixings. • Other sizes are available on request, including 2200mm high posts and 1800mm wide shelves. • Starter Units can be customised in advance or on-site to suit requirements. Construction: Shelves: A welded construction from heavy gauge steel wire with 2.5mm thick steel framing channel and 4 corner sockets. Finish: Bright zinc chromate. Shelf supports: Moulded tapered post collars in coloured nylon. Posts: Constructed from 25mm diameter x 1.6mm gauge steel tube, fitted with adjustable feet. Finish: Bright zinc chromate. Options on Request: Solid shelves, Stainless Steel construction, Heavy duty feet, Post Castors, Shelf link brackets, Wall anchor brackets. Accessories: Back walls, Side walls, Vertical dividers, Link hooks. Product

Code

4-Tier Shelving with 450mm depth shelves 4 x 900mm side shelves

3Q17.459/4

4 x 1200mm side shelves

3Q17.4512/4

4 x 1500mm side shelves

3Q17.4515/4

4 x 1800mm side shelves

3Q17.4518/4

4 Tier Shelving with 600mm depth shelves 4 x 900mm side shelves

3Q17.692/4

4 x 1200mm side shelves

3Q17.612/4

4 x 1500mm side shelves

3Q17.615/4

4 x 1800mm side shelves

3Q17.618/4

Extra shelves or poles are available on request for different configurations

Storage Flexirail Flexirail is a rail based modular storage and shelving system that can be wall or bench mounted. It offers a unique, modular and flexible system that offers bespoke solutions using standard component parts. Key features include: • Easy installation : • Fit the Rail to the wall and hang the Slotted Uprights. • Slot in Brackets, Hooks or Bobbins to add shelves, cupboards, white boards • Strong and durable; can fix to all wall-types. • Anodised Aluminium extruded metalwork with MFC shelves or cupboards.

• Hundreds of accessories and layout combinations available. • Solutions available for every style of operation or workplace requirement. • Harmonises with both Flexibuild and Compass Sort Units for Wall Mounting • Can be dismantled and reconfigured in minutes

Small Office Solutions

For the smaller office the glamour of a specific Office Services area or Mailroom is not a requirement or an affordable reality, but efficiencies and ergonomic operation can easily be supported by a small-scale multi-task bench area that can accommodate mail sorting, franking, stationery storage or act as a Central Post Point in a neutral location.

Office Mail Centres All-in-one mini mailroom solution in 3 designs. Combining a sort unit with a Series 90 bench, the Office Mail Centre provides a complete off the shelf integrated solution for the smaller workplace or satellite mailsort area. The large work top – including extra space created by raising the sort unit – has room for a franking machine and other equipment while the lockable cupboard below stores packing materials and stationery. Suitable for various wall types.

Office Mail Centre with Flexibuild Sort Unit 4 column, 16 compartment unit with 241mm width shelves housed on a 1200mm(W) x 900mm(H) lockable cupboard. With Upstand. Dimensions: 1200mm(W) x 750mm(D) x 2100(H) 3 column, 12 compartment unit with 318mm width shelves housed on a 1200mm(W) x 900mm(H) lockable cupboard. With Upstand. Dimensions: 1200mm(W) x 750mm(D) x 2100(H) 5 column, 20 compartment unit with 241mm width shelves housed on a 1500mm(W) x 900mm(H) lockable cupboard. With Upstand. Dimensions: 1500mm(W) x 750mm(D) x 2100(H) 4 column, 16 compartment unit with 318mm width shelves housed on a 1500mm(W) x 900mm(H) lockable cupboard. With Upstand. Dimensions: 1500mm(W) x 750mm(D) x 2100(H)

Code 30MC120/4/16

30MC120/3/12

30MC150/4/20

30MC150/3/16

Office Mail Centre with Compass Sort Unit Code 4 column, 20 compartment unit with 235mm width shelves housed on 30MC120/20NB a 1200mm(W) x 900mm(H) lockable cupboard. With Upstand. Dimensions: 1200mm(W) x 750mm(D) x 2100(H) 5 column, 25 compartment unit with 235mm width shelves housed on 30MC150/25NB a 1500mm(W) x 900mm(H) lockable cupboard. With Upstand. Dimensions: 1500mm(W) x 750mm(D) x 2100(H)

Office Mail Centre with Flexirail Shelving System 6 Flexirail shelves measuring 550mmW x 325mmD housed on a 1200mm(W) x 900mm(H) lockable cupboard. With Upstand. Dimensions: 1200mm(W) x 750mm(D) x 2100(H) 6 Flexirail shelves measuring 550mmW x 325mmD housed on a 1500mm(W) x 900mm(H) lockable cupboard. With Upstand. Dimensions: 1500mm(W) x 750mm(D) x 2100(H)

Code 30MC120/TR

30MC150/TR

We recommend that units are placed against a wall or back to back. Should you wish your unit to be free standing it must be secured to the floor – call for details.

Accessories

To provide clarity of identification, accuracy of distribution and a neat and tidy appearance, sort units and trolley baskets need to have adequate labelling or separation to aid in sorting or distribution efficiency.

Flexibuild Sort Unit Labelling Flexibuild labelling solutions include Flexibuild Clear Swing Label Holders:  Ideal for use with labels from your office printer.  Holds A4 width paper for extra legibility.  Scalloped edge allows label to be inserted and removed without removing the label holder.  Transparent holder secures with two plated rings (supplied). Product Clear Swing Label Holder (pack of 5)

Code 3CL1/PK5

Flexibuild Ring Labels:  Purpose made for Flexibuild units.  Ring labels comprise a rigid label with two plated fixing rings.  The plastic surface can be written on directly or labelled. Product Flexibuild Ring Label Holder (pack of 5)

Code 3SRL1/PK5

Flexibuild Framed Labels:  Durable moulded holder.  The black moulded frame clips securely to the frame of the sort unit. Add the inscription either by hand-writing or applying a printed label.  Clips onto upper leading edge of compartment. Product Framed Labels (pack of 5)

Code 3MLH1/PK5

Reversible Labels:  One label with two options.  Text can be applied onto both sides so sorting compartments can be used for more than one mail recipient at different times – or for in or out destinations.  Names can be written on directly or labelled. Product Reversible Labels (pack of 5)

Code 3MLH2/PK5

Trolley File Separation Concertina Filepacks for trolleys feature: • Hardwearing PVC-coated nylon files wipe clean. • Plastic-coated horizontal rods hold files secure. • Polypropylene-moulded label holders easily identify contents. Product Concertina Filepacks: File Starter Pack (for GT1/Classic Minor) includes: 1 set file rods, set of 5 concertina files and 5 label holders. Basket not included.

Code

File Starter Pack (for GT2/Classic Senior) includes: 1 set file rods, set of 5 concertina files and 5 label holders. Basket not included.

3TCCON2

Also available individually: Concertina File Set (5 Compartments) Label Holders (Set of 5)

3TCCON1

3TRCFR 3BASORTLH/PK5

Envosort Berna House, Hillbottom Road, Sands Industrial Estate, High Wycombe, Buckinghamshire, HP12 4HJ

T +44 (0) 1494 686500 F +44 (0) 1494 530258 W www.envosort.co.uk E sales@envosort.co.uk