LED FLOODLIGHT PRODUCTS SPECIFICATION
70W/100W
150W/200W
240W/300W
LINS GLOBAL LIMITED Address: 3rd Bld, Huafeng Industrial Park, Shiyan Town, Baoan district, Shenzhen, China www.lins-global.com info@lins-global.com
LED FLOODLIGHT PRODUCTS SPECIFICATION
MAIN FEATURES ±30° Adjustable angle for each single module
Symmetric:10°/30°/45°/60°/120° Asymmetric: 65°*135°/85°*135°
Simple structure for Surface mount or hanging
Meanwell Driver 5 Years Warranty
140
W LM/
LED CHIPS optional:
Multiple Application for In&Outdoor
Wall
Ceiling
Tunnel Light
Pole Mounted
Most energy-saving
150W
200W
= LINS
400W
= Normal LED
LINS GLOBAL LIMITED Address: 3rd Bld, Huafeng Industrial Park, Shiyan Town, Baoan district, Shenzhen, China www.lins-global.com info@lins-global.com
Metal Halide
LED FLOODLIGHT PRODUCTS SPECIFICATION
SPECIFICATION
Picture
Item
FL01-70W
FL01-100W
1 Module
Module Qty
FL02-150W
FL02-200W
FL03-240W
2 Modules
FL03-300W
3 Modules
Wattage
70W
100W
150W
200W
240W
300W
Comparable to HID
250W
250W
400W
400W
750W
1000W
AC90-305V
AC90-305V
AC90-305V
AC90-305V
AC90-305V
AC90-305V
9800lm
14000lm
21000lm
28000lm
33600lm
42000lm
8KG
8KG
Voltage
Lumen output
LED Chip Color Temperature
3000K - 4000K - 5000K - 6500K
70/80
CRI
10°/30°/45°/60°/120° 65°*135°/85°*135°
Beam Angle
IP65
IP Rating
DRIVER
1-10V Dimmable Optional
Dimmable
Net Weight
3.5KG
3.5KG
5.8KG
5.8KG
LINS GLOBAL LIMITED Address: 3rd Bld, Huafeng Industrial Park, Shiyan Town, Baoan district, Shenzhen, China www.lins-global.com info@lins-global.com
LED FLOODLIGHT PRODUCTS SPECIFICATION
AAI FIGURE FL01-70W 120°
FL01-100W 120°
FL02-150W 120°
FL02-200W 120°
FL03-240W 120°
FL03-300W 120°
LINS GLOBAL LIMITED Address: 3rd Bld, Huafeng Industrial Park, Shiyan Town, Baoan district, Shenzhen, China www.lins-global.com info@lins-global.com
LED FLOODLIGHT PRODUCTS SPECIFICATION
INSTALLATION Mounting type seat type
wall type
Please choose relative mounting type according to various installation surface. Steps as below： 1. Screw in the surface with 2 screws at proper hole site. 2. Lock the bolt in the hole of support, then use the hex nut and spring washer to fix the fitting support in the surface. 3. Loosen the adjustable bolt and place the fitting in the proper angle, then tighten the bolt and make sure all well installed. 4. Power off the main switch. Then connect the lamp power wire (at the back) with the power end, after check, switch on.
ceiling type
Hex nut Spring washer Expansion nut
L
Attention ●IP65 ●It is not allowed for non‐professionals to disassemble this product. ●Please read specification carefully and ensure it is environmental acceptable before using. ●Please ensure the main switch is powered off when connect the lamp to the power.
Adjustable bolt
Warning ●It is not allowed to install and test when powered on in case of LED damage ●It is not allowed to touch the heat fitting with bare wire in case of electric shock and short circuit.
LINS GLOBAL LIMITED Address: 3rd Bld, Huafeng Industrial Park, Shiyan Town, Baoan district, Shenzhen, China www.lins-global.com info@lins-global.com