Product Technical Information ITA/359 Rev.6 - 3/9/15 Page 1/4
T H E R M O S O LO G S Product Description and uses High performance Modified SBS elastomeric bituminous membrane. This membrane is used in a single layer heat-activating adhesive waterproofing system for parkings. Can also be used for roofs under heavy protection, inverted roofs and exposed roofs. This product is designed with a special adhesive pattern on bottom surface to enable free movement of vapour and to facilitate partial bonding. This product is designed for new works refurbishment works on approved substrates. . Product Approval ETN SOCOTEC technical approval .
and
Composition Top surfacing: mineral slates Bitumen compound: SBS (Styrene-Butadiene-Styrene) elastomeric bitumen Reinforcement: 180 gr/m2 polyester stabilised with glass fiber Back surfacing: thermo-adhesive edges and strips, protected by polyethylene film.
Dimensions Nominal Values Thickness on longitudinal selvedge (mm) Thickness main surface (mm) longitudinal selvedge width (mm)(1) Roll length and width (m)
Mineral Granules
Mineral Slates
4.0
4.0
5.0
4.8
90
90
7x1
7x1
Packaging Rolls per truck pallet Rolls per container pallet Rolls per wooden box Nominal weight (kg/m²) Roll weight (kg)
ISO 9001 REFERENCE DOCUMENT Our company has been awarded the ISO 9001 certificate for all its establishments in France. Our company reserves the right to modify its composition as a result of technological and experimental improvements. To obtain the up-date technical data sheet, please contact Siplast
Granules 20
Slates 20
20
20
20
20
6.75
6.4
47.5
45.2
Product Technical Information ITA/359 Rev.6 - 3/9/15 Page 2/4
Thermosolo GS Physical and Mechanical Properties According with EN 13707 Property (as Manufactured)
Test Method
Units
EN 12 311-1 EN 12 311-1 EN 1109 EN 1110 EN 1107-1 EN 12730 EN 12691 EN 12317-1
N/50mm % °C °C % kg mm N/50mm
Nominal values 850 x 600 40 x 49 ≤ - 20 ≥ 100 ≤ - 0.3 20 2000 600 x 900
EN 12691-B EN 1928
mm -
2000 Pass
Test Method
Units
Nominal values
ASTM D 5147 section 6 ASTM D 5147 section 6 ASTM D 5147 section 11 ASTM D 5147 section 15 ASTM D 5147 section 10
kN/m
Tensile strength at max Elongation at max Cold temperature flexibility Heat flow test Dimensional stability Static puncture resistance Impact resistance Shear joint resistance (side lap x head lap) Impact resistance (soft substrate) Waterproofing
According with ASTM D 5147 Property (as Manufactured) Tensile strength at max Elongation at max Cold temperature flexibility Heat flow test Dimensional stability
Icopal SAS 12, rue de la renaissance F-92184 Antony Cedex France
Tél. : +33(0)1 40 78 35 00 Fax : +33(0)1 45 88 56 87 Contact.fr@icopal.com Contact-international@icopal.com www.siplast.fr
%
16.3 x 11.7 54 x 66
°C
≤ - 20
°C
≥ 100
%
≤ - 0.3
R.C.S. Paris B 552 100 984 Société par Actions Simplifiées au capital de 5 729 600 €
Product Technical Information Product Technical Information ITA/359 Rev.6 - 3/9/15 Page 3/4
Typical Design and applications
Icopal SAS 12, rue de la renaissance F-92184 Antony Cedex France
Tél. : +33(0)1 40 78 35 00 Fax : +33(0)1 45 88 56 87 Contact.fr@icopal.com Contact-international@icopal.com www.siplast.fr
R.C.S. Paris B 552 100 984 Société par Actions Simplifiées au capital de 5 729 600 €
Product Technical Information Product Technical Information ITA/359 Rev.6 - 3/9/15 Page 4/4
Other informations
Generalities
Where 2 values for given characteristics are shown, the Values first is for longitudinal direction and the second is for the cross direction. Our company reserves the right to modify its composition as a result of technologic and experiments improvements. This Modification( product data sheet supersedes s) the previous edition, to obtain the up-date technical data sheet, please contact our technical department. It is not classified as dangerous Hazardous according to the international classification regulation (ADR, RID, IATA, et RTMDR) This product is only a product technical data sheet, regarding each waterproofing design, Divers please, consult the concerned technical agreement and in case of doubt contact our technical department. This product is packaged in rolls set up vertically on pallet or Storage wooden box. It must be stored vertically under shelter, away from heat sources.
Icopal SAS 12, rue de la renaissance F-92184 Antony Cedex France
Over concrete substrate previously primed with Siplast Primer 0.3lt/m2 2-layer systems torch applied using Paradiene 35 Upstands SR4 as base layer and Paradial S as top layer. Parking: from 2% to 5% Roofs under protection, Slopes inverted roofs, exposed roofs: >1% Protection for Concrete bitumen , parkings macadam 70mm minimum Application
Tél. : +33(0)1 40 78 35 00 Fax : +33(0)1 45 88 56 87 Contact.fr@icopal.com Contact-international@icopal.com www.siplast.fr
R.C.S. Paris B 552 100 984 Société par Actions Simplifiées au capital de 5 729 600 €