Product Technical Information ITA 417 Rev 2 – 15/01/17 Pag 1/2
FONDAFOR Product Description and uses Elastomeric bituminous waterproofing membrane for underground works.
Composition Surface Blend Reinforcement Bottom surface
Mineral self protection SBS elastomeric blend with anti-root agent Nonwoven polyester Thermofusible plastic film
Dimensions Nominal value 3.2 8 1 39.8 5
Thickness at the selvedge (mm) Length (m) Width (m) Weight of a roll (kg) Weight/m² (kg) Physical and Mechanical Properties
Tensile strength Elongation Cold bending resistance Heat flow resistance Dimensional stability Shear joint resistance (side lap x head lap) Static puncture resistance ( hard substrate) Impact resistance ( hard substrate) Waterproofing Vapour resistance Icopal SAS 12, rue de la renaissance F-92184 Antony Cedex France
Norm EN 12311-1 EN 12311-1 EN 1109 EN 1110 EN 1107-1 EN 12317-1
Unit N/5cm % °C °C % N/50mm
Nominal values 850 x 600 40 x 49 -20 100 -0.5 600 x 900
EN 12730 B
kg
20
EN 12691 EN 1928EN 1931
mm m².s.Pa/kg
800 Pass 1.4 E +12
Tél. : +33(0)1 40 78 35 00 Fax : +33(0)1 45 88 56 87 Contact.fr@icopal.com Contact-international@icopal.com www.siplast.fr
R.C.S. Paris B 552 100 984 Société par Actions Simplifiées au capital de 5 729 600 €
Product Technical Information ITA 417 Rev 2 – 15/01/17 Pag 2/2
Packaging Rolls quantity per truck pallet Rolls quantity per container pallet Rolls quantity per wooden box
24 25 27
Generalities about application Using Application Overlaps
Underground foundation walls This product is torch applied on concrete buried foundation walls previously treated with Siplast Primer at a rate of around 0.3l/m2. Side laps: 90mm - End laps : 100mm
Complementary informations Values
Tolerances
Modification(s) Hazardous classification Complementary information Storage
Where 2 values for given characteristics are shown, the first is for longitudinal direction and the second is for the cross direction. The average values derived from standard tests and are subject to the usual production variations. Some slight variations can be noticed as the values are based on the average values obtained from several plants. Our company reserves the right to modify its composition as a result of technologic and experiments improvements. This product data sheet supersedes the previous edition, to obtain the up-date technical data sheet, please contact our technical department. It is not classified as dangerous according to the international regulation (ADR, RID, IATA, et RTMDR) This product is only a product technical data sheet, regarding each waterproofing design, please, consult the concerned technical agreement and in case of doubt contact our technical department. This product is packaged in rolls set up vertically on pallet or wooden box. It must be stored vertically under shelter, away from heat sources.
Icopal SAS 12, rue de la renaissance F-92184 Antony Cedex France
Tél. : +33(0)1 40 78 35 00 Fax : +33(0)1 45 88 56 87 Contact.fr@icopal.com Contact-international@icopal.com www.siplast.fr
R.C.S. Paris B 552 100 984 Société par Actions Simplifiées au capital de 5 729 600 €