James Wright
Bachelor of Design Architecture | University of Florida
Florida Landscape
LIDAR Spatial Recording
1-6
7-10
Cultural Vessel
11-14
Vertical Excavation
15-18
A100
COVER PAGE PROJECT BACKGROUND
A102
3D VIEWS
A103
OVER ALL SITE PLAN
A104
SITE PLAN
A105
LONG ELEVATIONS
A106
ELEVATION A
PRODUCED BY AN AUTODESK STUDENT VERSION
A101
CEDAR KEY LIBRARY PROJECT
INDEX OF DRAWINGS
Spatial Projections A107
PLAN AT 2'
A108
PLAN AT 4'-6"
A109
FRAMING PLAN
A110
FRAMING BENT
A111
SECTION A
A112
SECTION B
A113
EXTERIOR SEATING
A114
INTERIOR SEATING
A115
SLAT DETAIL A
A116
SLAT DETAIL B
A117
BOOKSHELF DETAIL A
A118
BOOKSHELF DETAIL B
A119 A120
LOGBOOK DETAIL LOGBOOK PAGE
A121
JOINT DETAILS
A122
ENTRANCE DETAIL
A123
STEP
A124
APERTURE
DESIGNER(S) CARRISSA BEEKS HANA CICEVIC KELSEY CORCORAN JUSTIN DEVINE CARLOS RIOS GREYSON ROBERTS ERIKA SMITH CARLY WALKER JAMES WRIGHT
Design Build
A125
CATHARINE HOBDAY MEMORIAL
FASTENER SCHEDULE
GENERAL NOTES: -THIS STRUCTURE IS TEMPORARY AND CAN BE MOVED. THE STRUCTURE USES TIE DOWN METHODS TO COPE WITH THE POSSIBILITY OF FLOODS. -DUE TO THE STRUCTURE'S LOCATION ON AN ISLAND, THERE IS A CONSIDERATION OF MOISTURE AND RAINY CONDITIONS. THEREFORE, THE MATERIAL IS A NATURALLY MOISTURE RESISTANT WOOD, RED CEDAR, WHICH IS SUSTAINABLY SOURCED. -THIS IS A JOINT PROJECT, SIXTH IN THE SERIES, BETWEEN THE DESIGN BUILD ARCHITECTURE CLASSES AT THE UNIVERSITY OF FLORIDA AND CEDAR KEY. OTHER PIECES OF THIS SEQUENCE INCLUDE THE SITTING AREA BEHIND THE CHAMBER OF COMMERCE AND THE STAIRCASE AT SEAHORSE KEY. -THE 2020 DESIGN BUILD STUDIO ALSO COLLABORATED WITH THE CENTER FOR AFRICAN STUDIES AND JAMES GEORGE TO CREATE AN IMMERSIVE SPACE PRIOR TO THE DESIGN OF THIS PIECE.
SHEET
COVER PAGE
19-22
23-26
A Joint Between Two Ecosystems How can architecture be used as an instrument to reveal information about the Florida Landscape? The Florida landscape changes seasonally, and through the means of architecture, landscape can be measured and recorded over time. The boundary between two ecosystems of the Florida landscape can be defined through establishing the threshold with an architectural intervention.
Upland Pine Ecosystem
1
Threshold
Old Field Ecosystem
Professor | William Zajac Old Field Ice Chamber
Limestone Reservoir
1:53 2:51 3:55 PM
N
Design Studio | 5
Upland Pine Limestone Marking
1:33 12:11
11:52 11:13 AM
Horological Site Plan
2
First Mark
The First mark on the Florida landscape began by surveying the elevation changes of the first ecosystem. Environmental conditions made its mark through the warping of the tool. In response, I constructed an instrument to measure the changes of the ground through the use of tensioning in my tool. The architecture opens a space that is revealed through the act of tensioning the instrument, creating a threshold to the second ecosystem.
3
Professor | William Zajac
Design Studio | 5
Inital Surveying Construction
Surveying Line
Adaptive Surveying Construction
Opening Of New Spatial Connection
4
5
Ice Chamber
Professor | William Zajac
Design Studio | 5
Now coming full circle, the water that warped the tool now binds it together. The Ice reveals the landscape once its melted and leaves behind its mark on the instrument. A continues drip erodes into the limestone plate and travels down a channel into the joint reservoir. The tensioning of the turnbuckle allows for the opening of the second ice chamber to release the water in the joint reservoir.
Sequential Ice Melting
Water Channel to Joint Reservoir
6
Spatial Recording With LIDAR The use of LIDAR technology allows for the ability to record dynamic spaces with porous edges. The measurements from the LIDAR scanner are compiled in a point cloud to create a three-dimensional representation of the subject. A two axes rig was required to create a spherical scan of a space with the use of a Garmin LIDAR Lite. The data was then recoded using an open source program called Processing 3 created by Ben Fry and Casey Reas.
7
Independent Research
| 2019
Progression of LIDAR Scan
8
A long path in the forest was defined by the canopy of trees along the edge of the space. As the space progressed further in the forest, the trees varied their density along the egdes allwoing for moments of dark enclosure or flooded with light. I was interested in capturing this fluid change of the space with the LIDAR scanner that would yield specific measurments of the surface edges. After taking a sectional scan of the space through multiple intervals, the fragments were compiled in Rhino to visualize the space unfold. Further investigations would explore using LIDAR to create a three dimensional mapping of a forest that to be analayzed before marking an intervention. LIDAR Mount
Servo Pitch Mount
Breadboard and Tripod Mount
9
Independent Research
| 2019
10
Charleston Cultural Vessel Charleston South Carolina has been the intersection of many cultural identities due to the prevalent shipping port. The theater creates the joint between cultures and a joint between two spaces; education and commercial. The black box theater is housed in the cultural vessel which marks the corner of the public plaza of the community. The facade uses linear glass apertures to reflect the changing lighting conditions interior and exterior.
Light Study of Cultural Vessel
11
Professor |Michael Kuenstle
Design Studio | 6
12
Facade Cultural Vessel Black Box Theater
13
East Elevation
Professor |Michael Kuenstle
Design Studio | 6
Legend
1
2
3
PRODUCED BY AN AUTODESK STUDENT VERSION
N
5
PRODUCED BY AN AUTODESK STUDENT VERSION
PRODUCED BY AN AUTODESK STUDENT VERSION
4
1 -Main Lobby 2 - Cafe 3 - Administrative Offices 4 - Education Classrooms 5 - Exterior Garden
Ground Floor Plan
North Section
14
Vertical Excavation
Partner Cesar Tinjaca As Battery Park expanded its Manhattan coastline, artifacts were buried to create a strong foundation for new land. This new land is now home to the monument walk, a place to reflect on the memory of our past. At what point do objects become artifacts and memories become a monument? The tower on Battery Park is the joint between the forgotten artifacts below ground and the monuments above ground.
Battery Park Monuments
Site Excavation Mapping Collaboration with Cesar Tinjaca
15
Professor: Michael Montoya | Partner: Cesar Tinjaca | Design Studio | 7
Render by Cesar Tinjaca
Monuments and Artifacts Mapping
Sectional Studies
Verical Mapping
16
Reconstruction The extracted artifacts are first analyzed and recorded before being lifted through the core of the building, allowing for direct access to view the reconstructionprocess. The top of the tower is reserved for the construction of the monuments and public viewing before being placed in park bellow.
Foundry Workshop and Excavation Lift
17
Professor: Michael Montoya | Partner: Cesar Tinjaca | Design Studio | 7
Cross Section of Foundry Tower
18
NoLita Spatial Projections The neighborhood of NolLita in NYC is marked by street art along the walls painted by the local artists in the community. Each wall acts as a frame in which the community makes their mark on the architecture. When put together, each frame tells a larger story of the neighborhood as it changes over time. This project uses film to record the changes in the community and be used to organizes spaces through projection.
Film Projection on Building Surface
Process Projection Diagrams
19
Professor: Michael Montoya | Partner: Cesar Tinjaca | Design Studio | 7
20
Beginning by studying the street art, the process used a collage of the surrounding buildings as individual frames printed on transparent film. A context model was used to study how the film would make its mark on layers of thresholds through the projection of light. From this, diagrams were made which opened voids for the light to pass through and spaces to emerge from these thresholds.
4
5
3
2
1
6 7
8
Legend
Ground Floor Plan
21
1 - Gaden 2 - Artist Work Space 3 - Residential Lobby 4 - Temporary Maket 5 - Projection zone 6- Gallery 7 - Projection Zone 8 - Film Room
Professor: Michael Montoya | Partner: Cesar Tinjaca | Design Studio | 7
Render by Cesar Tinjaca
Projection Section and Tower Elevation
22
Cedar Key Design Build James Wright, Carissa Beeks, Hana Cicevic, Kelsey Corcoran, Justin Devine, Carlos Rios Greyson Roberts, Erika Smith, Carly Walker The Catherine Hobday Memorial commemorates the first female lighthouse keeper in Cedar Key and connecting with the history of Cedar Key. Located in front of the public Library, the purpose of the vessel is to mimic the daily ritual of a lighthouse keeper by inviting people to reflect, record, and read during their passage through the town. The project was a collaboration between UF architecture students and the town of Cedar Key. Currently Under Development
23
Professor: Charlie Hailey | Class Collaboration | Design Build Studio | 8
Construction Process of Final Structure
24
SOUTH EDGE OF LIBRARY
The structure was informed by the form and spatial qualities of a lighthouse, while also connecting with the local architecture and ecology of Cedar Key. Due to constraints of not allowing the structure to be permanently placed in the ground, two proposals were drawn to address securing it to the ground during extreme weather conditions. One version entailed using Augar Anchors positioned on the corners of the base and tensioned with ropes. A second version consisted of using pour in place concrete blocks embedded deep in the ground.
ENTRANCE (SEE A122) NORTH EDGE OF BUILDING ACROSS FROM PROJECT
ENTRANCE (SEE A122)
2''x1''CEDAR NAILERS
2''x1'' CEDAR SLATS
2''x6'' CEDAR FRAMING BENTS 2''x1''CEDAR NAILERS
2''x1'' CEDAR SLATS 2''x4''INTERIOR SEATING AND SHELF (SEE A114 AND A117) 2''x6'' CEDAR FRAMING BENTS
2"x4" EXTERIOR SEATING
(SEE A113) Connection Between Buildings Along Street 2''x4''INTERIOR SEATING AND SHELF Cedar Key (SEE A114 AND A117) 2''x4'' CEDAR DECKING GROUND
2"x4" EXTERIOR SEATING 2''x6''CEDAR BASE (SEE A113)
2''x4'' CEDAR DECKING GRAVEL DEPTH - GROUND 321''
TION
NORTH SECTION
2 2''x6''CEDAR BASE
Cemetary Point Boardwalk GRAVEL Cedar Key
A112
Scale: 1/2''=1'
Carissa Beeks
PRODUCED BY AN AUTODESK STUDENT VERSION
25
ECTION
1'
1 A123
DEPTH - 321''
2 A112
NORTH SECTION Scale: 1/2''=1'
1 A123
Professor: Charlie Hailey | Class Collaboration | Design Build Studio | 8
26