Rev 101814
Skybolt CLoc® SK4000 and ZG4000 Series
4 - Piece Series (Stud/Retainer - Grommet - Locking Receptacle) 1050 LB Ultimate Tensile Strength (Steel and CLoc® Stainless) NASM5591 and MIL-STD-810G Certified 900 LB Ultimate Tensile Strength (ZG4000 Skytanium®) TSO-C148 Certified
STUDS
3/8" Head Diameter - All Studs Note: Stud sizes thru -15 are self retaining in grommet. Studs require 4P3 Pliers to insert thru grommet.
40S5 Steel SK40S5-( )S Stainless 4002 Steel* SK4002-( )S Stainless (Collared Slot) ZG4002 ( ) Skytanium® (Collared Slot)
Stud Dash Number Stamped in Head
Use 4P3 Pliers to insert stud through grommet Panel (P) Drill to 15/32"
GROMMETS See Chart 1 for Specs
Standard Plus Flush Grommets
-orSee Chart 1 for Specs
Standard Flush Grommets
4002-( )W Steel SK4002-( )SW Stainless
SK-N2 Steel SK-N2S Stainless SK-N
Drill to 1/2"
Extended Depth
SK-O18
Steel
Grommets
SK-O316
Steel
Steel
SK-NS Stainless SK-O Steel SK-OS Stainless ZG-094 Skytanium® Panel (P) Drill to 15/32" (140deg Countersunk)) SK-G Steel SK-GS Stainless
SK-H SK-HS
SK-O14 SK-O18S SK-O316S SK-O14S
Steel Stainless Stainless Stainless
Steel Stainless
-orPanel (P) Drill to 15/32"
Grommet Retainers
See Chart 1 for Specs
Wide Flange Grommets
RECEPTACLES
SK-N3 SK-N3S SK-N316S ZG-094LA ZG-125LA ZG-187LA
Steel Stainless Stainless Skytanium® Skytanium® Skytanium®
R4G Grommet Retainer R4T High Shear Grommet Retainer SK-R531 Backing Washer (for Oversize Holes)
Use T26 Tool to install Retainers
Drill center hole to 5/8"
Support Panel (F)
Height = .5625" Rigid Receptacle 214-16 Steel 214-16D Dimpled SK215-4 Adjustable 1/8" Rivets
Skybolt Aeromotive Corp
Copyright 2014 Page 20
Floating Receptacle 244-16 Steel 244-16D Dimpled SK244-161 Fixed SK245-161 Adjustable
Some Part#s Special Order Only Refer to www.skybolt.com for current revision