JCB - 411 HT Spec Sheet (US) Mar 2013

Page 1

JCB WHEEL LOADER | 411 HT MAX ENGINE POWER: 100 hp (74 kW)

MAX OPERATING WEIGHT: 19,255 lb (8,734 kg)

MAX LOADER CAPACITY: 2.2 yd3 (1.7 m3)

STATIC DIMENSIONS – Standard Height Arm

STATIC DIMENSIONS – High Lift Arm

G

G

J

J

F

F

E

E H1

C

B

D

H1

A

H

C

B

STATIC DIMENSIONS – Standard Height Arm

D

A

H

STATIC DIMENSIONS – High Lift Arm

ft-in (mm)

ft-in (mm)

A Overall Length with Standard Bucket

19-7 (5978)

A Overall Length with Standard Bucket

20-0 (6090)

B Axle to Pivot Pin

3-10 (1166)

B Axle to Pivot Pin

4-2 (1278)

C Wheel Base

8-10 (2700)

C Wheel Base

8-10 (2700)

D Axle to Counterweight Face

4-6 (1375)

D Axle to Counterweight Face

4-6 (1375)

E Minimum Ground Clearance

1-4 (410)

E Minimum Ground Clearance

1-4 (410)

F Height Over Exhaust

9-7 (2928)

F Height Over Exhaust

9-7 (2928)

G Width Over Cab

5-0 (1515)

G Width Over Cab

5-0 (1515)

H Width Over Tires

7-3 (2203)

H Width Over Tires

7-3 (2203)

H1 Wheel Track

5-11 (1800)

H1 Wheel Track

5-11 (1800)

J Height Over Cab

10-1 (3078)

J Height Over Cab

10-1 (3078)

Pin Height (maximum)

11-5 (3487)

Pin Height (maximum)

11-11 (3621)

Overall Operating Height

14-6 (4427)

Overall Operating Height

14-11 (4559)

Front Axle Weight

lb (kg)

7936 (3600)

Front Axle Weight

lb (kg)

8271 (3752)

Rear Axle Weight

lb (kg)

9950 (4513)

Rear Axle Weight

lb (kg)

8027 (3641)

Total Weight

lb (kg)

18,636 (8453)

Total Weight

lb (kg)

19,341 (8773)

Inside Radius

8-7 (2608)

Inside Radius

8-7 (2608)

Maximum Radius

17-9 (5414)

Maximum Radius

17-11 (5465)

Articulation Angle

± 40°

Articulation Angle

degrees

Data based on machine equipped with a 1.6 yd3, direct mounted bucket with bolt on toeplates and Michelin 15.5R25 XHA (L3) tires

degrees

± 40°

Data based on machine equipped with a 1.6 yd3, direct mounted bucket with bolt on toeplates and Michelin 5.5R25 XHA (L3) tires


JCB WHEEL LOADER | 411 HT

LOADER DIMENSIONS – Standard Height Arm

CHANGES TO OPERATING PERFORMANCE AND DIMENSIONS

Tipping Loads

Tire size N

M

T

Q

Manufacturer

Type

Dimensions

Op Weight

Straight

Full Turn

Vertical

Width

lb (kg)

lb (kg)

lb (kg)

in (mm)

in (mm) +0.276 (+7)

Rating

15.5 - 25 (crossply)

Goodyear

SGL D/L 12 Ply

L2

-347 (-158)

-207 (-94)

-202 (-92)

-0.157 (-4)

15.5 - 25 (crossply)

Goodyear

HRL D/L 12 Ply

L3

-273 (-124)

-163 (-74)

-158 (-72)

0

0

15.5 R 25 (radial)

Goodyear

GP - 2B

L2

0

0

0

-0.157 (-4)

+0.276 (+7)

15.5 R 25 (radial)

Michelin

XTLA

L2

-106 (-48)

-64 (-29)

-62 (-28)

-0.157 (-4)

+0.276 (+7)

15.5 R 25 (radial)

Michelin

XMINED2

L5

+961 (+436) +580 (+263) +560 (+254) +1.654 (+42) +0.118 (+3)

R S

O

P

Assumes the machine is fitted with Michelin 15.5R25 XHA (L3) tires.

Bucket Mounting

Bucket Type General Purpose General Purpose General Purpose General Purpose Light Material General Purpose General Purpose General Purpose General Purpose Light Material

Bucket Equipment

Bucket Capacity (SAE heaped)

yd3 (m3)

1.6 (1.2)

1.8 (1.4)

1.6 (1.2)

1.8 (1.4)

2.2 (1.7)

1.6 (1.2)

1.8 (1.4)

1.6 (1.2)

1.8 (1.4)

2.2 (1.7)

Bucket Capacity (struck)

yd3 (m3)

1.319 (1.009)

1.542 (1.180)

1.319 (1.009)

1.542 (1.180)

1.780 (1.362)

1.319 (1.009)

1.542 (1.180)

1.319 (1.009)

1.542 (1.180)

1.780 (1.362)

Bucket Width

ft-in (mm)

7-5 (2250)

7-10 (2400)

7-5 (2250)

7-10 (2400)

7-10 (2400)

7-5 (2250)

7-10 (2400)

7-5 (2250)

7-10 (2400)

7-10 (2400)

Bucket Weight

lb (kg)

1106 (502)

1280 (581)

1164 (528)

1329 (603)

1406 (638)

1056 (479)

1230 (558)

1113 (505)

1278 (580)

1353 (614)

Maximum Material Density

lb/yd3 (kg/m3)

3651 (2208)

3148 (1835)

3651 (2208)

3148 (1835)

2552 (1592)

3476 (2102)

2997 (1748)

3476 (2102)

2997 (1748)

2469 (1515)

Tipping Load Straight

lb (kg)

13,574 (6157) 13,205 (5990) 13,574 (6157) 13,205 (5990) 13,104 (5944) 12,982 (5889) 12,633 (5730) 12,982 (5889) 12,633 (5730) 12,532 (5685)

Tipping Load Full Turn

lb (kg)

11,685 (5300) 11,334 (5141) 11,685 (5300) 11,334 (5141) 11,232 (5095) 11,126 (5047) 10,790 (4894) 11,126 (5047) 10,790 (4894) 10,689 (4848)

Payload

lb (kg)

5843 (2650)

5667 (2570)

5843 (2650)

5667 (2570)

5616 (2547)

5563 (2523)

5395 (2447)

5563 (2523)

5395 (2447)

5433 (2424)

Maximum Break Out Force

lbf (kN)

16,455 (73.2)

15,219 (67.7)

16,455 (73.2)

15,219 (67.7)

14,095 (62.7)

15,106 (67.2)

14,005 (62.3)

15,106 (67.2)

14,005 (62.3)

12,836 (57.1)

M

Dump Angle Maximum

degrees

50°

50°

50°

50°

50°

50°

50°

50°

50°

50°

N

Roll Back Angle at Full Height

degrees

43°

43°

43°

43°

43°

43°

43°

43°

43°

43°

O

Roll Back at Carry

degrees

47°

47°

47°

47°

47°

47°

47°

47°

47°

47°

P

Roll Back at Ground Level

degrees

41°

41°

41°

41°

41°

41°

41°

41°

41°

41°

Direct Tipped Teeth

Direct

Direct

Direct

Direct

Quickhitch

Tipped Teeth Reversible T/plate Reversible T/plate Reversible T/plate Tipped Teeth

Quickhitch

Quickhitch

Quickhitch

Quickhitch

Tipped Teeth Reversible T/plate Reversible T/plate Reversible T/plate

Q

Load Over Height

ft-in (mm)

10-7 (3242)

10-7 (3242)

10-8 (3237)

10-8 (3237)

10-8 (3237)

10-8 (3259)

10-8 (3259)

10-8 (3254)

10-8 (3254)

10-8 (3254)

R

Dump Height (45° dump)

ft-in (mm)

8-3 (2524)

8-0 (2450)

8-7 (2624)

8-6 (2582)

8-4 (2532)

8-2 (2490)

8-0 (2426)

8-6 (2590)

8-4 (2548)

8-2 (2498)

S

Dig Depth

ft-in (mm)

0-4 (108)

0-4 (113)

0-4 (100)

0-4 (105)

0-4 (105)

0-4 (91)

0-4 (96)

0-3 (83)

0-3 (88)

0-3 (88)

T

Reach at Dump Height

ft-in (mm)

3-5 (1035)

3-6 (1061)

3-0 (925)

3-1 (951)

3-3 (996)

3-7 (1084)

3-8 (1124)

3-2 (974)

3-4 (1014)

3-6 (1059)

Reach Maximum (45° dump)

ft-in (mm)

4-11 (1505)

5-2 (1569)

4-7 (1395)

4-9 (1459)

5-0 (1529)

4-5 (1488)

4-10 (1475)

4-5 (1358)

4-6 (1365)

4-8 (1435)

Operating Weight (includes 176 lb/80 kg operator and full fuel tank) lb (kg)

18,578 (8427) 18,752 (8506) 18,636 (8453) 18,801 (8528) 18,878 (8563) 18,958 (8599) 19,132 (8678) 19,015 (8625) 19,180 (8700) 19,255 (8734)


JCB WHEEL LOADER | 411 HT

LOADER DIMENSIONS – High Lift Arm

CHANGES TO OPERATING PERFORMANCE AND DIMENSIONS HIGH LIFT ARM

Tipping loads

Tire size N

M

T

Q

Manufacturer

Type

Dimensions

Op Weight

Straight

Full Turn

Vertical

Width

Rating

lb (kg)

lb (kg)

lb (kg)

in (mm)

in (mm) +0.276 (+7)

15.5 - 25 (crossply)

Goodyear

SGL D/L 12 Ply

L2

-347 (-158)

-194 (-88)

-192 (-87)

-0.157 (-4)

17.5 R 25 (radial)

Goodyear

HRL D/L 12 Ply

L3

-273 (124)

-154 (-70)

-150 (-68)

0

0

17.5 R 25 (radial)

Goodyear

GP - 2B

L2

0

0

0

-0.157 (-4)

+0.276 (+7)

17.5 R 25 (radial)

Michelin

XTLA

L2

-106 (-48)

-60 (-27)

-57 (-26)

-0.157 (-4)

+0.276 (+7)

17.5 R 25 (radial)

Michelin

XMINED2

L5 +961 (+436) +580 (+263) +560 (+254) +1.654 (+42) +0.118 (+3)

R S

O

P

Assumes the machine is fitted with Michelin 15.5R25 XHA (L3) tires.

Bucket Mounting

Bucket Type General Purpose General Purpose General Purpose General Purpose Light Material General Purpose General Purpose General Purpose General Purpose Light Material

Bucket Equipment

Tipped Teeth

Tipped Teeth

Tipped Teeth

Tipped Teeth

Bucket Capacity (SAE heaped)

yd3 (m3)

1.6 (1.2)

1.8 (1.4)

1.6 (1.2)

1.8 (1.4)

2.2 (1.7)

1.6 (1.2)

1.8 (1.4)

1.6 (1.2)

1.8 (1.4)

2.2 (1.7)

Bucket Capacity (struck)

yd3 (m3)

1.319 (1.009)

1.542 (1.180)

1.319 (1.009)

1.542 (1.180)

1.780 (1.362)

1.319 (1.009)

1.542 (1.180)

1.319 (1.009)

1.542 (1.180)

1.780 (1.362)

Bucket Width

ft-in (mm)

7-5 (2250)

7-10 (2400)

7-5 (2250)

7-10 (2400)

7-10 (2400)

7-5 (2250)

7-10 (2400)

7-5 (2250)

7-10 (2400)

7-10 (2400)

Bucket Weight

lb (kg)

1106 (502)

1280 (581)

1164 (528)

1329 (603)

1406 (638)

1056 (479)

1230 (558)

1113 (505)

1278 (580)

1353 (614)

Maximum Material Density

lb/yd3 (kg/m3)

3456 (2090)

2979 (1738)

3456 (2090)

2979 (1738)

2415 (1418)

3291 (1990)

2837 (1654)

3291 (1990)

2837 (1654)

2299 (1349)

Tipping Load Straight

lb (kg)

12,853 (5830) 12,504 (5672) 12,853 (5830) 12,504 (5672) 12,408 (5628) 12,295 (5577) 11,963 (5426) 12,295 (5577) 11,963 (5426) 11,867 (5383)

Tipping Load Full Turn

lb (kg)

11,061 (5017) 10,727 (4866) 11,061 (5017) 10,727 (4866) 10,631 (4822) 10,532 (4777) 10,213 (4633) 10,532 (4777) 10,213 (4633) 10,117 (4589)

Payload

lb (kg)

5530 (2508)

5363 (2433)

5530 (2508)

5363 (2433)

5315 (2411)

5266 (2389)

5107 (2316)

5266 (2389)

5107 (2316)

5059 (2295)

Maximum Break Out Force

lbf (kN)

16,455 (73.2)

15,219 (67.7)

16,455 (73.2)

15,219 (67.7)

14,095 (62.7)

15,106 (67.2)

14,005 (62.3)

15,106 (67.2)

14,005 (62.3)

12,836 (57.1)

M

Dump Angle Maximum

degrees

47.5°

47.5°

47.5°

47.5°

47.5°

47.5°

47.5°

47.5°

47.5°

47.5°

N

Roll Back Angle at Full Height

degrees

44°

44°

44°

44°

44°

44°

44°

44°

44°

44°

O

Roll Back at Carry

degrees

48.5°

48.5°

48.5°

48.5°

48.5°

48.5°

48.5°

48.5°

48.5°

48.5°

P

Roll Back at Ground Level

43.5°

43.5°

43.5°

43.5°

43.5°

43.5°

43.5°

43.5°

43.5°

43.5°

Q

Load Over Height

ft-in (mm)

11-1 (3371)

11-1 (3376)

11-1 (3371)

11-1 (3371)

11-1 (3371)

11-2 (3393)

11-2 (3393)

11-1 (3388)

11-1 (3388)

11-1 (3388)

R

Dump Height (45° dump)

ft-in (mm)

8-9 (2658)

8-6 (2594)

9-1 (2758)

8-11 (2716)

8-9 (2666)

8-7 (2624)

8-5 (2560)

8-11 (2724)

8-10 (2682)

8-8 (2632)

S

Dig Depth

ft-in (mm)

0-4 (111)

0-5 (116)

0-4 (103)

0-4 (108)

0-4 (108)

0-4 (94)

0-4 (99)

0-3 (86)

0-4 (91)

0-4 (91)

T

Reach at Dump Height

ft-in (mm)

3-6 (1069)

3-7 (195)

3-2 (959)

3-3 (985)

3-5 (1030)

3-8 (1118)

3-10 (1158)

3-3 (1008)

3-5 (1048)

3-7 (1093)

Reach Maximum (45° dump)

ft-in (mm)

5-11 (1810)

6-2 (1874)

5-7 (1700)

5-9 (1764)

6-0 (1834)

5-11 (1793)

5-10 (1780)

5-5 (1663)

5-7 (1670)

5-9 (1740)

degrees

Operating Weight (includes 176 lb/80 kg operator and full fuel tank) lb (kg)

Direct

Direct

Direct

Direct

Direct

Reversible T/plate Reversible T/plate Reversible T/plate

Quickhitch

Quickhitch

Quickhitch

Quickhitch

Quickhitch

Reversible T/plate Reversible T/plate Reversible T/plate

19,196 (8707) 19,370 (8786) 19,253 (8733) 19,418 (8808) 19,495 (8843) 19,575 (8879) 19,749 (8958) 19,632 (8905 ) 19,797 (8980) 19,872 (9014)


JCB WHEEL LOADER | 411 HT LOADER

AXLES

Widely spaced four ram parallel geometry provides the combination of excellent visibility with high bucket torque characteristics throughout the working arc. Specification includes automatic bucket reset and lift arm kickout mechanisms. The pin, bush and sealing design on all pivot points provide extended maintenance intervals. Optional smooth ride system (SRS) reduces machine bounce on load/carry operations. Optional High Lift Loader specifically designed for optimum load over height.

Type

Epicyclic Hub Reduction

Make & Model

JCB PD70 Front & Rear

Overall Axle Ratio

18.16 : 1

Rear Axle Oscillation

12.5°

STEERING

ENGINE 4-cylinder wastegated turbo-charged, liquid cooled, direct injection diesel. Independent water pump and fan drives ensure maximum cooling efficiency and “clean-burn” combustion chamber provides minimum fuel consumption. A remote sump oil drain facility simplifies servicing. Type

Diesel 4 Stroke

Make

JCB Dieselmax Tier III

Capacity

in3 (l)

269 (4.4)

Bore

in (mm)

4.06 (103)

Stroke

in (mm)

Aspiration Cylinders Max Gross Power to SAE J1995/ISO 14396 Net Power to SAE J1349/EEC 80/1269 Max Torque

5.2 (132)

Priority steer hydraulic system with emergency steering. Piston pump meters flow through steer valve @ 2,538 lb/in2 (175 bar) to provide smooth low effort response. Steering angle ± 40°. Steer rams located high in the chassis fabrication to provide protection from damage. Adjustable steering column.

BRAKES Hydraulic power assisted braking on all wheels. Dual circuit with accumulator back-up provide maximum safety under all conditions. Organic brake linings are environmentally acceptable. Parking brake, mechanical disc type operating on transmission output shaft.

Turbocharged 4

hp (kW) @ 2200 rpm

100 (74.2)

hp (kW) @ 2200 rpm

92.8 (69.2)

lbf.ft (Nm) @ 1400 rpm

325 (440)

TIRES A variety of tire options are available including: 15.5 x 25 x 12 ply (L2). 15.5 x 25 x 12 ply (L3). 15.5R25 XTLA (L2). 15.5R25 GP2B (L2). 15.5R25 XHA (L2).

Emissions:Complies with EPA Tier III – EU Stage 3A engine emission legislation.

LOADER HYDRAULICS Double gear pump with automatic unloader giving combination of speed and power on demand making efficient and economic use of available engine power. Main services are servo actuated from a single lever loader control. Accumulator back-up is available to control loader in the event of loss of pump pressure. Pump Type

TRANSMISSION

Pump 1 Max Flow

4 wheel drive, automatic smooth shift transmission electrically operated selector and gear change incorporating a speed inhibitor and modulation for smooth, responsive on-the-move direction and ratio changes. Single stage integral torque converter 4 forward and 3 reverse gears. Type

Smooth Shift Powershift

Make & Model

ZF 4WG115

Torque Converter Stall Ratio

3.057 : 1

1st Gear

mph (km/h)

3.33 (5.36)

2nd Gear

mph (km/h)

7.75 (12.47)

3rd Gear

mph (km/h)

17.09 (27.5)

4th Gear (forward only)

mph (km/h)

23.30 (37.5)

Pump 1 Max Pressure Pump 2 Max Flow

Double Gear Pump

gal/min (l/min)

13.3 (50.6)

lb/in2 (bar)

3190 (220)

gal/min (l/min)

19.1 (72.6)

lb/in2 (bar)

2465 (170)

Hydraulic Cycle Times at Full Engine Revs

Seconds

Arms Raise (full bucket)

5.0

Bucket Dump (full bucket)

1.1

Arms Lower (empty bucket)

3.7

Total Cycle

9.8

Pump 2 Max Pressure

Ram Dimensions

Bore

Rod

Closed Centers

Stroke

Bucket Ram x2

in (mm)

3.1 (80)

2 (50)

59.1 (1502)

36.5 (928)

Lift Ram x2

in (mm)

3.5 (90)

2 (50)

43.6 (1107)

29.3 (743)

Steer Ram x2

in (mm)

2.4 (60)

1.2 (30)

24.4 (621)

12.3 (312)


JCB WHEEL LOADER | 411 HT

ELECTRICAL SYSTEM

STANDARD EQUIPMENT

24 V negative ground system, 55 Amp alternator with 2 x 126 Amp hour low maintenance batteries. Isolator located in rear of machine. Ignition key start/stop and pre-heat cold start. Primary fuse box. Other electrical equipment includes quartz halogen, twin filament working lights, front/rear wash/wipe, heated rear screen, full road going lights, clock, gauge and warning light monitoring. Connectors to IP67 standard. System Voltage

V

24

Alternator Output

Ah

55

Battery Capacity

Ah

2 x 110

Loader: Bucket reset mechanism, loader arm kickout mechanism, loader control isolator, single lever servo control, high torque true parallel lift geometry combines with excellent visibilty between the arms. Engine: Air cleaner – 3 stage dry type – cyclonic with primary and safety elements, auto tensioner, cold start advance, fuel filters, fan guards. Transmission: Single lever shift control, speed inhibitor, neutral start, disconnect on footbrake and loader lever, disconnect isolator switch, direction changes and kickdown on gear selector and loader control lever, air blast transmission cooler. Axles: Epicyclic wheel hub reduction, fixed front, oscillating rear. Brakes: Multi-plate wet disc brakes, organic linings, dual circuit hydraulic power assisted. Parking disc brake on transmission output shaft.

CAB

Hydraulics: Double gear pump with priority steer, emergency steer back-up, 2 spool loader circuit with accumulator support, 3rd spool auxiliary hydraulic circuit as standard. Hydraulic tank located in the rear chassis fabrication. Air blast cooler.

Resiliently mounted ROPS/FOPS structure (tested in accordance with ISO 3471-1 : 1986 / ISO 3449 : 1984). Deluxe operator environment combines ergonomically located controls with a high level of appointment and low internal noise levels. Entry/exit is via large rear hinged door and anti-slip steps. Excellent forward visibility is provided by a 3 section curved, laminated windscreen and low waistline. Extensive instrumentation includes electronic monitoring panel and display (EMS). Heating / ventilation provides balanced and filtered air distribution throughout the cab via a powerful 11 kW capacity heater. The unitary construction allows easy sealing and prevents ingress of dust. A transmission lock on the selector prevents inadvertent engagement and the loader controls can be isolated for safe road travel.

Steering: Adjustable steering column, “soft feel” steering wheel 5 turns lock to lock, resilient stops on max lock. Cab: ROPS/FOPS safety structure, cigar lighter, ashtray, interior reading light, center mounted master warning light. Electronic monitoring panel with LCD message display. Two speed intermittent front windscreen wipe/wash and self park, single speed rear windscreen wipe/wash and self park. 3 speed heater/demisting with replaceable air filter, LH and RH opening windows, sun blind, internal rear view mirror, heated external mirrors, adjustable suspension seat with belt and headrest, operator storage facilities, laminated windscreen, loader control isolator, horn. Electrical: Road lights front and rear, parking lights, front and rear working lights, reverse alarm and light, rear fog light, battery isolator, radio wiring and speakers, 55 amp alternator, rotating beacon. Bodywork: Front fenders, side and rear access panels, flexible bottom step, full width rear counterweight, recovery hitch, lifting lugs.

ATTACHMENTS An extensive range of attachments including pallet forks, crane jibs, high dumping buckets and timber grapples are available to fit directly or via the JCB quickhitch mounting.

SERVICE FILL CAPACITIES

gal (l)

Hydraulic System

29 (110)

Fuel Tank

33 (125)

Engine Oil Sump

2.8 (10.7)

Transmission Oil System

7.1 (27)

Axle Oil (front)

6.6 (25)

Axle Oil (rear)

6.6 (25)

Engine Coolant System

5.7 (21.5)

OPTIONAL EQUIPMENT Auxiliary 4th spool hydraulic service, air conditioning, limited slip differentials front/rear axles, additional counterweight, oil bath air cleaner, turbo 2 pre-cleaner, visibowl pre-cleaner, tooth guard, replaceable bucket wearparts, sealed alternator, epoxy coated radiator/coolers, smooth ride system (SRS), hydraulic quickhitch, rear fenders, high lift arms, reversing camera (color), auto greasing system, auxiliary control buttons on joystick, spark arrestor, 24 V to 12 V in cab converter, cab screen guards, additional front and rear cab mounted work lights, air suspension seat, front chassis apron mat, sun visor.


JCB WHEEL LOADER | 411 HT

LOADER DIMENSIONS - FORK FRAME WITH FORKS Parallel Fork

Roll Back Fork

Assumes Michelin 15.5R25 XHA L3 Tires Fork Carriage Width

ft-in (mm)

4-11 (1500)

4-11 (1500)

Length of Tines

ft-in (mm)

4-0 (1220)

4-0 (1220)

A

Reach at Ground Level

ft-in (mm)

2-2 (662)

2-2 (669)

B

Reach at Arms Horizontal

ft-in (mm)

4-8 (1425)

4-8 (1432)

C

Below Ground Level

ft-in (mm)

0-1 (17)

0-1 (27)

D

Arms, Horizontal Height

ft-in (mm)

5-8 (1728)

5-8 (1718)

E

Arms, Maximum Height

ft-in (mm)

10-11 (3320)

10-10 (3310)

F

Reach at Maximum Height

ft-in (mm)

2-8 (813)

2-8 (820)

Payload**

lb (kg)

6322 (2868)

6322 (2868)

Tipping Load Straight

lb (kg)

9533 (4324)

9533 (4324)

Tipping Load Full Turn (40째)

lb (kg)

8175 (3708)

8175 (3708)

Attachment Weight

lb (kg)

970 (440)

970 (440)

F

E D

A

**At the center-of-gravity distance 1 ft 8 in (500 mm). Based on 80% of full turn tipping load as defined by ISO 8313. Manual fork spacings at 50 mm increments. Fork section 4 in x 2 in (100 mm x 50 mm).

C B

HIGH LIFT LOADER DIMENSIONS - FORK FRAME WITH FORKS F

Assumes Michelin 15.5R25 XHA L3 Tires

E D

A

C B

Parallel Fork

Roll Back Fork

Fork Carriage Width

ft-in (mm)

4-11 (1500)

4-11 (1500)

Length of Tines

ft-in (mm)

4-0 (1220)

4-0 (1220)

A

Reach at Ground Level

ft-in (mm)

2-8 (801)

2-8 (808)

B

Reach at Arms Horizontal

ft-in (mm)

5-0 (1521)

5-0 (1528)

C

Below Ground Level

ft-in (mm)

0-1 (17)

0-1 (27)

D

Arms, Horizontal Height

ft-in (mm)

5-8 (1728)

5-8 (1718)

E

Arms, Maximum Height

ft-in (mm)

11-4 (3459)

11-4 (3449)

F

Reach at Maximum Height

ft-in (mm)

2-8 (815)

2-8 (822)

Payload**

lb (kg)

6190 (2808)

6190 (2808)

Tipping Load Straight

lb (kg)

9027 (4095)

9027 (4095)

Tipping Load Full Turn (40째)

lb (kg)

7738 (3510)

7738 (3510)

Attachment Weight

lb (kg)

970 (440)

970 (440)

**At the center-of-gravity distance 1 ft 8 in (500 mm). Based on 80% of full turn tipping load as defined by ISO 8313. Manual fork spacings at 50 mm increments. Fork section 4 in x 2 in (100 mm x 50 mm).


JCB WHEEL LOADER | 411 HT

BUCKET SELECTOR

STANDARD ARM

Bucket Capacity yd3 (m3)

2.2 (1.7) 100%

1.8 (1.4)

115%

95%

Bucket Fill Factors

1.5 (1.2)

1,350 (800)

1,680 (1000)

2,020 (1200)

2,360 (1400)

2,700 (1600)

3,030 (1800)

3,370 (2000)

3,700 (2200)

4,040 (2400)

4,380 (2600)

Material Density lb/yd3 (kg/m3)

BUCKET SELECTOR Material

Loose Density

Fill Factor

Loose Density

Fill Factor

lb/yd3

kg/m3

%

Material

lb/yd3

kg/m3

%

Snow (fresh)

337

200

110

Sodium Chloride (dry) (salt)

2192

1300

85

Peat (dry)

674

400

100

Cement Portland

2428

1440

100

Sugar Beet

894

530

100

Limestone (crushed)

2580

1530

100

Coke (loose)

961

570

85

Sand (dry)

2613

1550

100

Barley

1012

600

85

Asphalt

2698

1600

100

Petroleum Coke

1146

680

85

Gravel (dry)

2782

1650

85

Wheat

1231

730

85

Clay (wet)

2832

1680

110

Coal Bitumous

1290

765

100

Sand (wet)

3187

1890

110

Fertilizer (mixed)

1737

1030

85

Fire Clay

3507

2080

100

Coal Anthracite

1764

1046

100

Copper (concentrate)

3878

2300

85

Earth (dry) (loose)

1939

1150

100

Slate

4721

2800

100

Nitrate Fertilizer

2180

1250

85

Magnetite

5402

3204

100


JCB WHEEL LOADER | 411 HT

A GLOBAL COMMITMENT TO QUALITY JCB’s total commitment to its products and customers has helped it grow from a one-man   business into one of the world’s largest manufacturers of backhoe loaders, crawler   excavators, wheeled excavators, telescopic handlers, wheeled loaders, dump trucks,   rough terrain fork lifts, industrial fork lifts, mini/midi excavators, skid steer loaders and tractors. By making constant and massive investments in the latest production technology, the JCB factories have become some of the most advanced in the world. By leading the field in innovative research and design, extensive testing and stringent quality control, JCB machines have become renowned all over the world for performance, value and reliability. And with an extensive dealer sales and service network in over 150 countries,   we aim to deliver the best customer support in the industry. Through setting the standards by which others are judged, JCB has   become one of the world’s most impressive success stories.

JCB Headquarters Savannah, 2000 Bamford Blvd, Savannah, GA 31322 Tel: (912) 447-2000 Fax: (912) 447-2299 www.jcb.com JCB reserves the right to change design, materials and/or specifications without notice. Specifications are applicable to units sold in the United States and Canada. The JCB logo is a registered trademark of J C Bamford Excavators Ltd. DWUSA 2979 12/11


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.