Vilasinee Nitbongkoch Architectural portfolio by Jelly Vilasinee

Vilas Vilas VILASINEE NITBONGKOCH architectural portfolio 2021

Hi! My name is Vilasinee Nitbongkoch I'm graduated from faculty of architecture from King Mongkut's University of Technology Thonburi based in Thailand. The following is my architectural selected works , to convey my interest and skill. Thank you for your attention, hope you enjoy :)

VILASINEE NITBONGKOCH EDUCATION King Mongkut's University of Technology Thonburi Faculty of architecture SoA+d

2017-2021

EXPERIENCE

vilasinee.nit@gmail.com (+66)911026699

2019 Aug

Design workshop, five east asain universities (FEAU) at sungkyunkwan university souel, korea

2019 Dec

Arsa SoA+D volunteer camp

2020 Feb

Takuapa design workshop with Shmaa

2021 Mar

Internship at Black pencil studio

ARCHIEVEMENT

10 Soi 42/14 Senanikhom Rd. Amornphan 9 Ladprao Ladprao Bangkok, Thailand 10230

2019 Nov

3rd place Flat to form design competition award by Art4d X Lamitak

2020 Jul

1st place Boat pattana Phuket design

Jelly Vilasinee

SKILL architectural computer program Rhinoceros 3D

Grasshopper

Revit

Autocad

Enscape

Lumion

graphical computer program Adobe illustrator Adobe photoshop

language skill Thai English German

OTHER INTEREST Drawing Chick flick movies Guitar Badminton k-pop

Sketch up

CONTENT

Phuket boat pattana Ko Kaeo development project (1st prize)

P.6

P.50

CCCAC community and contemporary cultural art center P.64

biomimicry project future school 2030

Orphanage for kid in risk P.38

Sri-tara thai authentic hospitality design P.58

mixed use building (office & residential) project P.70

CONTENT

wood house for exchange student at soa+d P.78

Art4d x lamitak design competition : visualization wave (3rd Prize)

P.92

arsa volunteer camp at naan province , pua district , baan kok joon school P.102

renovation project too fast too sleep co-working space P.86

1:1 card board shelter at Soa+d gallery ‘Black impact’ P.98

01 Phuket boat pattana Ko Kaeo development project (1st prize) The project originated from Boat Pattana company limited's development plan of the land in Ko Kaeo, Phuket, Thailand. Which has sea and mountain scenery at the north and south of the land. We were working in group of three. The design brief is to design commercial area, residential area and hotel area within the project. And as we had discussed among group, So we decided to take commercial part of the project for me. Co-working with : Thanapoom boondee Pawanrant Kitiyanont From faculty of architecture, King Mongkut's University of Technology Thonburi

Concept We first came up with the four element concept. As we researched further we were acknowledged that all of these element can be measured on the geometric. And we finally found a pattern that can convey all of these element which called "Flower of life" pattern. From that we tried to intrigrate the concept with the sense of each building zone.

use flower of life pattern to help convey the concept and resonate to the scale

Site plan

Commercial zone

Residential zone

Club house

Hostel center

Hostel

Commercial isometric site plan

Street scape section

Restaurant

Section 1

Section 2

Retail stores

Section 1

Section 2

Section 3

Ice skating rink and gym system diagram

Rain water tank

GYPROC® MOISTURE RESISTANT BOARD

Mini tank

Reflective glass 8x2,400x3,600 mm

Section 1

Section 2

Super market and grab and go bar

Section 1

Section 2

Section 3

Education zone

Section 1

Section 2

Section 3

Exhibit room and theater

Section 1

Section 2

Section 3

Sale office

Section 1

Section 2

Section 3

02 Orphanage for kid in risk

Project background Research from the cause of sexual issue existed in Thailand. The research begin from sex worker who are not having consent to do this job then focusing on the kid who got most risk for becoming sex worker and recieving other social problem. So this project aim to help homeless children from the bad society or improper condition to grow up. Support them with architecture program, focusing on space improvement due to their activity and living lifestyle. Proposing the supporting system via private company. For this project, I chose CP ALL company to demonstrate the system

Building idea and concept Missing fundamental connection to society

Kid with no family / parents “Orphan”

“Create strong connection among kids to eatablish fundamental connection to society”

By give an importance to

1) give center sharing space 2) give privacy according to their ages

Zoning

center point

sharing space (for everyone 0-18 y/o)

2 activities / access

semi-private area (for kid 3-12 y/o) private area (for kid 13-18 y/o)

by having a center of activities and access

Concept and zoning development 2

3 make green to become boundary to define common space and border for grown up kid

increasing middle common space to be bigger because there're more amount of people using it

by that kid is not connect to other, so cut out the green to make center axis connection

4 reducing the area at the corner and increase in the middle because the amount of user in each space

6 increase front entrance area to be bigger to be able to recieved more children

entrance defined in lower corner of the building, so cut out the green space on the lower side to create access for entrance

change level line to become more harmonize

change front entrance to go along with plan shape

putting security and administration in front of the entrance to increase kid's security

putting staff aside to be easier to access office, kid's area and outside

facing toddler and grown up in different direction to create common space in the middle

storage is between outside and inside to be easy to access toy from outside and inside. children WC is between outside and inside of the building.

locate the dumpster next to maid area

adjust size of baby area and canteen to be suitable

the canteen and baby area block the access from entrance / rotate to give access

Drawing Plan section elevation

03 biomimicry project future school 2030 Biomimicry school of the future 2030 is the project of how to use an advantages of an animal in the way of adaptation, instinct behavior and else to adapt into the building in the future that we would face many kind of problems such as shortage of the water , air pullution or population density. Grasshopper is used to generate and convey an idea of biomimicry.

Idea and inspiration As researched, the world in 2030 tend to have more global warming, the temperature will be increased and the would also have a water shortage. So I thought about how to cool the building down by using the water to create temperature sustainability. As I got an idea, I was finding a biological things to support my idea and lead to the function to the building. Therefore I chose to use the benefit of the skin of " thorny devil lizard " to make buildeing be able to collect the rain water to reuse and also cool down the building temperature.

15”

zoom in

6”

zoom in

The skin surface has reduced its scale as they getting near Moloch mouth

zoom in

3” 1.8”

each scale enlarged and drawn out to a point in the centre.but the shape of the scales also serves another and most unusual function. Each is scored with very thin grooves radiating from the central peak.

Adapt to the building idea The groove for conveying the water of the lizard can compairing in architecture as the the line to define the group from the pattern. Which are resonate to the pedagogy as it said the student will be convince to study in group and stay in group.

Overlapping scale of the thorny devil created the tube-like groove underneath to convey the water. So I use this logic combining with diamond shape to create the overlapping space and can be the critique space as the school pedagogy emphasizing on the critical thinking

Use the logic that the water will be recieve first from the central peak of the scale. And applied it on the site factor. (The scale will be bigger as it getting near the natural factor)

Idea and inspiration Mai

Main

n gr oov e/m

1.8” 6”

groo ve / m

outh

3”

15”

Size redu app cing r 1/2 oximate each ly step

Size of the skin reducing in order to spread the water into the main groove equally Then from the main groove it convey the water into its mouth. The skin scale also reduce as it getting closer it mouth.

The amount of the scale is also increasing as the scale go far from the central peak. To convey the water to go down in the groove equally.

From research it said that sphere is the strongest structural geometry, so I combine with the diamond shape which is the shape that can be seamless connection when put together

resulting the geometry that can create the sub-divide with the same shape and create the negative space and circulation within the overlapping space.

Factor I use in grasshopper for this logic is the circulation of people around the site. Once the shape are getting closer to the line the shape will reduce its size in to half and has only 4 variety of sizes as I had set in grasshopper.

The second attractor I used after I had size the shape down. I used this attractor to catch the shape along the ling of the street around site.

then i also use an idea of sub-divide to planning the space inside the building.

Axonometric diagram

GLASS PANEL

ALUMINIUM LOUVER

STEEL FRAME FOR GLASS PANEL HOLDING

SPACED TRUSS STEEL STRUCTURE

GLASS OPENING TO UNDERGROUND RAIN WATER TANK

Form generating process 1

applying diamond grid along the site and make and attractor line that is the access factor to scale down the pattern of the grid

add another line to catch the module along the site

add another attractor point to rotate the surface with the direction of rain water (the same direction as wind direction)

use the center of the module to be the water collector point as same as the function of the lizard scale

make it divide surface itself when getting near to the attractor point (which is the direction of sunlight) and make less divided shape to be a sunblocker

project diamond grid on the surface

0.5 mm aluminium -non-combustible Mineral-filled core

20 cm spaced truss

applying spaced truss along the surface.

10 cm glass panel

10 cm steel frame

10 cm gypsum board with sound insulation

20 cm thick spaced truss

concrete floor hollow core

ROOF PLAN 1:500

04 Sri-tara thai authentic hospitality design

Programming Concept From the segmentation analysis will define the programmatic of hotel from the main user target group is called

“ 3L ” methods

Lifestyle / Food Local

L L

L Living Share experience space Community collaboration Activity together with nature

Learning Art and culture Traditional and culture Design service process

Couple types

LGBTQ couple

Retirement couple

Young couple

Age range 60

honeymoon couple Age range

Age range 80

Activities : - Boat riding - Swimming - Authentic dinner - Learning new local wisdom - Spa

- Boat riding - Swimming - Kids activities, playground , little workshop - Authentic dinner / Street food Family types - Family activity during vacation

Age range 35

Activities : - Boat riding - Swimming - Authentic dinner / Street food - Private sweet time - Nightlife Friend types -

Adult couple

Activities : - Boat riding - Swimming - Authentic dinner / Street food - Private sweet time - Nightlife

Boat riding Swimming Authentic dinner / Street food Extreme sport Nightlife

Public Semi-Public Private

TYPE UNITS : COUPLE NAME : PHANA-WAN

TYPE UNITS : FAMILY 1ST FLOOR NAME : PHANA-DORN

TYPE UNITS : COUPLE SPACIAL NAME : TARA-RIM

TYPE UNITS : FAMILY 2ND FLOOR NAME : PHANA-DORN

TYPE UNITS : GROUP 1ST FLOOR NAME : MUEN GLER

TYPE UNITS : DROUP 2ND FLOOR NAME : MUEN GLER

UNITS SCALE 1:50

Forming by inspired from Thai traditional form with more function on roof skylight allow natural light to come in, as well as sustainable design integrated throught the roof gap which allow ventilation from window through the roof layers.

1 Mimic of old style

Nature Atmosphere

Learning Explore

Step by Step The concept is to mimic old lifestyle of people in the floating market by customizing each room type to suit with the guests to live comfortably. There is a way to put the pool in line with the current canal. And has mimicked old-fashioned outdoor showers in a new context. We're meant to add and activities that is related to the unique Thai way of living. for users to learn by doing it themselves, including consuming local food That comes from the local people of the villagers as well.

05 CCCAC community and contemporary cultural art center Design brief of this project is to design a museum and community center around Rama 8 bridge. Aim to connect 3 community which are Wat Kahabordi community, Baan poon community and Bangaor Muslim community Project collaborate with Thiptriya Punthong

Idea concept and inspiration

Started from one piece of single panel as like a single rode from the bridge.

first we attempt to build a form with the stripes module which protrude up and down due to the program height. But as the concept is to interconncet 3 communities together, So I tried to connect it as 1 mass

Devided the panel into 3 parts with differ length according from the program of each panel.

Extended the opening space to create more accessible route. To the community

So I tried to united the form so we first start from the single surface and then adjust the level on the surface according to the level then we split it out to be 3 path to imply about 3 communities

devide some part of the panel to be walking route to enter the building

And for the final touch, we remove a part of the surface out to have some natural light to come in into the building

Axonometric diagram roof material ROOF STRUCTURE AND MATERIAL

Form up the building with steel structure and with Anodized aluminum plate finishing. for walkable ramp, exposed Concrete terrace surface will be applied.

roof material

glass panel roof

truss system

mirror framel

second floor wall

glass panel second floor

second floor slab

glass panel first floor

WALL VOLUMN HEIGHT

The height of each zone was considered accoring from the program needs. For lowest height is for multipurpose outside activity, for highest zone is for the exhibition zone

first floor wall

first floor slab ROUND COLUMN ground column

parking lots

1.2mx1.2m concrete column Stress reduction in construction load, as well as creating warm and welcoming sense with for visitorto the inside building.

get inside the buiding by walk up on the roof ramp

continue on the second roof on the second floor and preserve an outdoor sculpture

3 2

then get in to the public zone of the build, visitor can enter theater, restaurant , cafe and seminar room 1 front entrance for the visitor the visitor can contribute to either public or exhinbition zone

visitor circulation

and officer can also get in the the exhibition zone in second floor

from the first floor officer can get up to the office in second floor

get up from the officer parking lot and continue to office zone on first floor 1

officer can enter freely to the exhibition hall to be easier to work

officer circulation

fire stairs exit / public lift service lift core

06 Mixed use building (office & residential) project Objective of this project is to study revit in advance,

3D View 18

Idea and concept In this project we had made a mixed used building with an idea of super structure which has an exposed beam and column to the building. And the structure connect with the each mass of the building. The main program of the building is an office, residential unit and commercial shop orderly.

Floor plan 1

10.00

1 A301

A501 A50 A40

1 A301

10.00

Room Legend Legen

ASIA BOOK BOOK

10.00

Room Legend A

CO-WORKING SPACE FEMALE W.C. HALL WAY WAY

10.00

DROP OFF 1

FEMALE W.C.

A204

GAME ROOM ROOM

A202

GOURMET

HALLWAY HALLWAY

MALE W.C. OFFICE SPACE

GREYHOUND

HALL WAY

HALLWAY A AY

10.00

GREYHOUND

10.00

OFFICE E SPACE

GAME ROOM

10.00

A404 A40

ASIA BOOK

RELAXING AREA A

GREYHOUND CAFE HALL WAY WAY

STORAGE

Calculating ing...

LOBBY

GREYHO OUND MALE W.C.

RESTAURANT

FEMALE W.C.

MALE W.C.

10.00

FEMALE W.C.

CO O-WORKING SPAC CE

MALE W.C. OFFICE

1 A205

STORAGE

2 A202

GOURME ET

Calculating...

10.00

RESTAURAN RES RANT

1 A302

A401 A40

A501 A50 A40

A401 A40

10.00

A501 A50 A40

1 A302

F STORAGE MALE W.C.

OFFICE GREYHOU UND CAFE

FEMALE W .C.

MALE W.C.

FEMALE W..C.

10.00

1 A203

RELAXING AREA

G V

10.00

DROP OFF 1

LOBB BBY

A201

HALL WAY A AY

10.00

HALL WAY

A402 A40

Ground floor plan

4th floor plan

A301

A404 A40

10.00

A301 10.00

10.00

A501 A50 A40 10.00

10.00

Room Legend

Room Legend A

CO-WORKING SPACE

BATHROOM

FEMALE W.C.

BED ROOM

OFFICE SPACE

CO-WORKING SPACE OUTDOOR

10.00

OFFICE SPACE

FITNESS GARDEN

HALL WAY WAY

CREATIVE STAIR OUTDOOR R

HALL WAY WA

KID POOL KID ROOM

LIVING ROOM

HALL WAY

10.00

HALL WAY

OFFICE SPACE

MALE W.C.

OFFICE SPACE

READING SPACE WALK-IN CLOSET

POOL

FEMALE W.C.

10.00

CO-WORKING NG SPACE

Calculating ing...

10.00

MALE W.C.

YOGA ROOM Calculating ing...

CO-WORKING SP SPACE OUTDOOR

10.00

1 A302

1 A302 CREATIVE ST TAIR OUTDOOR

A401 A40

A501 A50 A40

A401 A40

10.00

A501 A50 A40

F MALE W.C.

FEMALE W .C.

BATHROOM

KID ROOM LIVING ROOM

10.00

GARDEN

READIN NG SPACE

G V

WALK-IN CLOSET

G V YOGA ROOM

A211

BED ROOM

FITNESS

10.00

2 A210

KID POO OOL L

10.00

POO OOL

A210

7th floor plan

A402 A40

10th floor plan

The building have overall 14 floor plans. Each floor have all the function in one. Each square provide different usage.

Level 15

56.00

4.00

56.00

Level 14

52.00

4.00

52.00

Level 13

48.00

4.00

48.00

Level 12

44.00

4.00

44.00

Level 11

40.00

4.00

40.00

Level 10

36.00

4.00

36.00

Level 09

32.00

4.00

32.00

Level 08

28.00

4.00

28.00

Level 07

24.00

4.00

24.00

Level 06

20.00

4.00

20.00

Level 05

16.00

4.00

16.00

Level 04

12.00

4.00

12.00

Level 03

8.00

4.00

8.00

Level 02

4.00

Level 01

0.00

4.00

0.00

Basement

-4.00

Level 15

Level 15 56.00

56.00

4.00

C A501 Level 14

Level 14 52.00

4.00

52.00

Level 13

Level 13 48.00

4.00

48.00

Level 12

44.00

4.00

44.00

Level 11

40.00

4.00

40.00

Level 10

Level 10 36.00

4.00

36.00

Level 09

4.00

32.00

4.00

32.00

Level 08

Level 08 28.00

4.00

28.00

Level 07

Level 07 24.00

4.00

24.00

Level 06

4.00

20.00

4.00

20.00

Level 05

16.00

4.00

16.00

Level 04

4.00

12.00

4.00

12.00

Level 03

Level 03 8.00

4.00

8.00

Level 02

4.00

Level 01

Level 01 0.00

4.00

0.00

Basement -4.00

WOODEN PLANK , MATERIALS : NAUGHTONE WOOD OAK

VERTICAL WOOD PLANK 150 X 50 MM 10.00 0.29 0.29 0.29 0.29 0.29 0.29 0.29 0.29 0.29 0.29 0.29 0.29 0.29 0.29 0.29 0.29 0.29 0.29 0.29 0.29 0.29 0.29 0.29 0.29 0.29 0.29 0.29 0.29 0.29 0.29 0.29 0.29

Level 03

10.00

8.00

4.00

---

Level 02 4.00

4.00

Level 01 0.00

FACADE TOP VIEW 1 : 50

FACADE FRONT VIEW 1 : 50

WOODEN PLANK , MATERIALS : NAUGHTONE WOOD OAK VERTICAL 150 X 50 MM, H : 8000 MM Level 06 20.00

WOODEN PLANK , MATERIALS : NAUGHTONE WOOD OAK VERTICAL 150 X 50 MM, H : 8000 MM CONCRETE COLUMN 300 X 500

Level 05 16.00

Level 04 12.00

Level 03

A206

8.00

HORIZONTAL WOOD PLANK 100 MM, L : 10000 MM

Level 02 4.00

Level 01 0.00

Basement -4.00

FACADE SIDE VIEW 1 : 50

FACADE ISOMETRIC VIEW

Axonometric diagram

12th floor

9th floor

7th floor

3th floor

ground floor

Overall building appearance and landscape

Commercial and living area

Office and co-working space

07 Wood house for exchange student at SoA+D Design brief is to design a house for exchange student who stay at SaA+D university and the concept are from the material selection. In this project I got wood as a starter of the concept.

Site pond

50 cm

20 m

30 m

pond 50 cm

10 m

Concept My inspiration is come from my material selection. My material is wood from design proposition. So from the site, I thought about the tree that could be represent Bangkhuntian best. So mangroove tree is the first tree that came up to my thought.

center of the truck

smaller branch

smallest branch

Adapt a system to house design

main space

sub-function

function

Model development

For the model on the left, I tried to simply connect 3 space which is small,medium and large space together. And on the right I made a space hierarchy into small, medium and large circle.

3 And from from number 2, as the site boundary was limit, So I decided to reduce a model component and move 2 components closer

So I developed it to be the preliminary design, I cut the roof for the sky light and make a connection of 2 masses by wooden bridge

Model development

Final outcome

So for the final outcome, I decided to divide it into 4 differrent height sector. And make a space in the middle to become a courtyard. I developed the skylight on top of the roof to only be 1 single line just for natural light to come in and simplify the design.

Section 1

Section 2

A D B C

Plan 1st floor Section 1

Section 2

A D B C

Plan 2nd floor

Section 1

Section 2

Elevation A

Elevation B

Elevation C

Elevation D

08 Renovation project too fast too sleep co-working space This project is about to renovate co-working space and cafe called "Too fast to sleep" in Samyan, Bangkok Thailand.

Idea concept and inspiration This concept is came from the experience when you walk along this building. That the level of the silence is increasing continuously when you get into the very inner side of the building. And also the first impression i got from the building that the building was looking small on the outside but space was unexpectingly huge on inside

the form inspiring from the experiment of imploding - the more the can get implode, the space inside the can is getting smaller. So in comparison into architectural space and concept, I want to make the space that gradually getting smaller and the privacy and the silence is gradually change too due to the concept.

the concept diagram from the imploding experimental clip

Idea concept and inspiration

1st develop 3d model : tried to connect each imploding stage to become 1 piece of model

2nd develop 3d model : tried to imitate each stage of imploding and make a model of each stage

3rd develop 3d model : developed model from 2nd stage model, make the model to be flat. And project the shadow from the section view of the model

4th develop 3d model : make the flat surface to connect as one design

Final study model development PRIVATE LIBRARY

3rd floor

PUBLIC

MEETING SPACE

PUBLIC

MEETING SPACE

2nd floor

PRIVATE LIBRARY

CAFE &RESTAURANT 1st floor

PRIVATE OFFICE

THE MOST PRIVATE ZONE CAN ONLY BE ACCESSED BY ENTERING THE SECOND LEVEL OF ANOTHER PRIVATE ZONE TO MAKE IT EVEN MORE PRIVATE

I LIFT THE PRIVATE ZONE UP TO THIRD FLOOR LEVEL TO RELATE TO MY DESIGN CONCEPT “IMPLODING OF SILENCE” I HAD RESEARCH AND FOUND THAT HOW HIGH THE ROOM ABOVE THE GROUND IS HOW QUIET IT IS.

RELATED TO K. ANEK THAT HE REALLY CONCERN ABOUT FUNCTION IN TO FAST TOO SLEEP SO THIS FACADE COULD ACT LIKE A LARGE BOOKSHELF ND THE CUSTOMER COULD BE ABLE TO SIT IN THERE TOO.

Elevation A

LEVEL 1 FLOOR PLAN

C D B A

LEVEL 2 FLOOR PLAN

LEVEL 3 FLOOR PLAN

Elevation D

C D B A

Interior perspective

09 Art4d x lamitak design competition : visualization wave (3rd Prize) Design brief is to design a product, pavillion or component of the building by using the 'Lamitak' laminate sheet in the design.

Idea concept and inspiration

+ projection mapping technology

overlapping concept

+ New experimental space

+ bending ability of laminate

by combining these idea together created new way of expressing art , graphic , footage and can also be mini public node for people to gather. This pavillion would move and change it’s way of folding as the visual in projector change.

The panel change its bending level by the mapping program and will stay on point with the picture or graphic showing showing 3D effects

Function

can adapt to be stage background for stage play to make more realistic and new experience for the spectator.

Can be adapt with interior design as space divider in the bigger scale

The design is flexible enough to change its shape depending to the surrounding and space

Pavillion system TOP

FRONT

SIDE

0.3 m 3 m

1.5 m

3 m

1.5 m 0.1 m 1.5 m

1.5 m

curved laminate box automatic wire reel connected with computer mapping program

fishing wire white laminate

Changing the density and number of strip

Change the height of the structure and change how the structure curved

Attached joist

Change how much laminate need to bend to have correctly mapped with projector

10 1:1 card board shelter at Soa+d gallery ‘Black impact’ CO-WORKING WITH : LAKSIKA SANPRADITH VORAMATE KRITPOLCHAI WATSUPHOL SINCHANACHAI WITITA WANGPLATONG

SARAN PRISUTKUL SASIPIM SIVAROROSKUL SATTAPAWN LIMPACHA SIWAGON SINTANAPON

Idea and inspiration An idea came from the need of adjustable space and user. This pavillion will be place at the faculty of architecture which will include a variety of behavior in each student, some feel comfortable to be alone, some feel better with other. So we come up witht heset of module which allow the user to adjust and add a creativity by adjust the composition of the pavillion by themself.

STACKING METHOD TO MAKE THE STRENGHT OF THE MODULE STRONG TO HOLD HUMAN WEIGHT WHEN SITS.

REINFORCING METHOD TO MAKE THE STRUCTURE LIGHT SO ECH MODULE CAN CONNECT TOGETHER AND ABLE TO PUT ACROSS THE WALL

WE HAD PREFAB EACH PIECE BY USING THE DI-CUTTER METHOD AND HAD A LITTLE HAND CUT TO DETAILED IT

PLACING A STACKING MODULE ON THE BASE OF EACH MODULE LINE TO HOLD THE PRESSURE OF OTHER UPPER PIECES. PLACING REINFORCE TO UPPER PART TO REDUCE THE WEIGHT

3 X 8 CONNECTED EACH MODULE WITH BINDER PAPER CLIP WITH THE SILVER HOLDER TAKEN OUT. WE USED 8 OF BINDER PAPERCLIP TO CONNECT 2 OF THEM TOGETHER

Develop and testing CHOSEN GALLERY AS THE SITE FOR PLACING THIS MODULE BECAUSE THE WHITE COLOR OF THE GAL GALLERY WALL WILL ENHANCE THE BLACK COLOR OF THE SHELTER MORE.

THE FORM REFERS TO MOVEMENT AND WIDE SPREADING OF THE MODULE. THIS CREATES EYE CATCHING AND ATTRACTION FROM THE PEOPLE PASSING BY.

ACCORING TO THE INSPIRATION OF HUMAN POSTURE, THE MODULE BY ITSELF HAVE AN ANGLE WHICH IS ABLE TO SUPPORT HUMAN BACK AND ABLE TO SIT WITHOUT HURTING AND UNCOMFORTABLE.

OUR SHELTER COULD HAVE BOTH INTERIOR AND EXTERIOR SPATIAL QUALITY DEPENDS ON WAY AND SIDE OF THE USER USING. 2 STACKING LINES OF MODULE WILL CREATE SPACE FOR 1-2 PEOPLES.

11 Arsa volunteer camp at naan province , pua district , baan kok joon school Design brief is to design a product, pavillion or component of the building by using the 'Lamitak' laminate sheet in the design.

Idea concept and inspiration ARSA "Tawan Yimchang" is a volunteer group since 2009. This camp is 21st camp. This year we had built multipurpose class room as the request from the head of the school that they had not efficient class room for all level of the student. Each year we had 15 days to complete our building and since this year had limited the amount of the student who were able to get into the camp into 150 peoples and also had 2 buildings to finish. so this year was so challenging to managed all the people and time to finish the building on time. We seperate each major of the student into the job that each person are expert at.

saliV saliV Vilasinee Nitbongkoch +66 911026699 E-mail : vilasinee.nit@gmail.com