5 Steps To Installing A High-Velocity HVAC System

5 Steps To Installing A High-Velocity HVAC System

Written By : Jennifer Smith Date : 4-july-2019

Context: • What is HVAC System • 5 Steps To Installing A High-Velocity HVAC System

• Graphics • Contact Us

What is HVAC System “The initials HVAC stand for Space heating, Freshening and Air Preparing. They describe the functions of an HVAC system. This mechanical system’s enterprise is primarily an attempt to take control of the conservational conditions inside the interplanetary you work.”

5 Steps To Installing A High-Velocity HVAC System

1.

2.

3.

4.

5.

Calculate The Load.

Find A Suitable Location For The Fan Coil Unit Construct A Simple Platform Connect Supply Tubing And Plenum Duct Install Supply Tubing

1. Calculate The Load.

“The initial step is to complete a heap computation. SpacePak gives a "Kwik Way" measuring structure that is intended to precisely give a room-by-room load for the high-speed framework. Additionally offered is a "Source" CD including count programming. The product can be downloaded at no expense at www.spacepak.com.

Since the framework has been appropriately estimated for the structure, we can start our hardware establishment.�

2.Find A Suitable Location For The Fan Coil Unit

“The underlying thought is the area of the fan loop unit. The fan loop unit might be situated in an unconditioned space. Regions, for example, an upper room, carport, or creep space are adequate as long as the area is shielded from the climate and nearby codes are met. The fan loop unit may likewise be situated in an adapted space, for example, a cellar, storage room, or utility room. Two kinds of fan curl design are offered - flat and vertical cupboards.�

3. Construct A Simple Platform

You can develop a straightforward stage dependent on the size of the fan curl unit. (Guidelines for this might be found in the establishment manual). It is prescribed to utilize 2-by 8-inch stud amble and at least 1/2-inch pressed wood for stage development.

Continuously utilize the gave segregation strips under the unit for best execution. You can also hire company like QRG AIR CONDITIONING

5. Install Supply Tubing You are presently prepared to introduce the supply tubing. (Snappy connectors, plenum departures with gaskets, and offsetting holes are provided with the establishment unit.) Always maintain a strategic distance from sharp twists in the supply tubing and attenuator tubing. Supply tubing normally comes in 100-foot lengths and might be sliced to wanted length. The base length is 6 feet and the most extreme is 30 feet with attenuator. Slice your supply tubing to the best possible length.

4. Connect Supply Tubing And Plenum Duct When introducing the air circulation parts, it is dependably a smart thought to complete a framework design dependent on your estimating parameters. The plenum conduit might be kept running in essentially any area that is available for the connection of the supply tubing. (Audit recommended formats in the establishment manual).

Graphics:

Contact Us

Contact Number : 703-466-0072 Email us:

info@qrgtech.com

Visit us on: Quality Furnace Installation Services