Tanks rebuildable of strictlyecig

Tanks Rebuildable of strictlyecig



Rebuildables, or RDAs are tanks wherein the customer is meant to use their own choices of wire and wick to fire at any custom combination of resistances and materials. This is a bit more complicated, but allows the vaper to achieve the most customized and extreme results.

Nimbus V3 RDA 

SKU: MODS:NIM



Brand:

Generic / Clone

Product Description This is an advanced dripping atomizer system for experienced users. 

Specs: 510 Connector / Tips Airhole size: 1 MM Stainless Steel Grade 304



3 Terminals (with holes)



Splash Shield

Be Advised: 1 - The atomizer may become damaged if the mesh is not oxidized correctly.

2 - Do not wind the wire too tightly around the pole.

3 - A rebuildable coil / wick should always be tested carefully with a meter before it is used. Faulty wicks / coils will blow electronic devices.

4 - New coil / wick units should always be tested and then used first on a strong basic electrical APV such as a Silver Bullet, that will not be destroyed by a short circuit.

5 - No new coil / wick assembly should be used on an electronic device until known to be safe.

6 - These items have inherent risks and may go faulty at any time even if they were originally in good working order. The owner bears the cost of equipment damaged as a result.

7 - RAs or RTAs must only be used on equipment that cannot be seriously damaged or harm the user. In practice this could mean an electrical device with a hot spring (fuse) or an electronic device that will not activate if there is a short-circuit (a dead short).

Unfused devices or unprotected electronic devices will suffer damage when used with a faulty RA or RTA.

Igo-w (PC Cap) RDA 

SKU: MODS:IGOCAP



Brand:

Generic / Clone

Product Description Clear cap and drip tip for the IGO W family of dripping atomizers. Dual air holes for maximum air flow.



Acrylic top cap



Two step design on the cap



Pre-drilled dual air holes



3 step design matching drip tip



Dual o-ring



Available for IGO-W atomizer

Igo-W4 RDA 

SKU: MODS:IGOW4



Brand:

Generic / Clone

Product Description The new IGO-W4 is an upgraded version of the popular IGO-W. It features the same 3 hole post for easy dual coil builds. The main feature of the new IGO-W4 is in the cap design. It now has a larger volume top cap for extra airflow, for even more extreme vapor production. Stainless steel comes with silica wick, kanthal wires, and extra o-rings.



Dripping atomizer



Polished stainless steel finish



Single air hole in top cap



Triple-post system



Fits most 510 drip tips (drip tips sold separately)



Double o-ring seals on bottom base



Height without drip tip: 25.5mm (Approx.)

For details information, visit us

http://strictlyecig.com