1 minute read
Updating cues
by Jim Logan
Update allows you to modify previously recorded cues, groups, submasters or focus points in Stage. Update takes levels from all captured and selected channels, and those selected may be restricted with the Only command. 19
Updating an active cue
Advertisement
The following procedure illustrates how to update a cue that has been played back.
Keystrokes:
1. Press [Stage].
Action:
Selects Stage display mode
2. Press [Cue], enter cue number and press [Go].
Plays back selected cue, bringing up its current levels 3. Modify channel levels as Sets cue levels or selects additional desired. channels and sets their levels 4. Press [S2], Update. Prompt reads:
To update cue, select number and press ENTER (TRACK + ENTER for tracking) To cancel, press CLEAR
5. To restrict channels in the update, use Only here.a Selects channels to update Prompt reads:
Select channel numbers To cancel, press CLEAR
6. Press [Enter].b Updates the active cue
a. Optional step. b.If you want the update to track into subsequent cues, press [Track] before pressing enter.
19. For an explanation of captured channels, see Channel modes, page 52. For an explanation of Only, see The Only command, page 8.
Updating a recorded cue
You need not play back the cue to update it. The following procedure illustrates how to update any recorded cue.
Keystrokes:
1. Press [Stage]. 2. Press [S8], Fixture, [1] [Thru] [8], [Full].
Action:
Selects Stage display mode Selects fixtures 1 through 8 and sets their intensities to full 3. Set the pan and tilt levels.a Sets the levels of the position attributes for all selected fixtures 4. Press [S2], Update, [3]. Selects cue 3 to update Prompt reads:
To update cue, select number and press ENTER (TRACK + ENTER for tracking) To cancel, press CLEAR
5. Press [Only] [S8], Fixture, [6] and [7].b Restricts the update to fixtures 6 and 7 Prompt reads:
Select fixture number(s) To cancel, press CLEAR
6. Press [Enter].c Updates cue 3
a. Use your trackpad. b.Optional step. If you don’t use Only, all non-zero channels are included in the update. c. If you want the update to track into subsequent cues, press [Track] before pressing enter.
