1 minute read
Updating focus points
by Jim Logan
Update allows you to modify previously recorded cues, groups, submasters or focus points in Stage. Update takes levels from all captured and selected channels, and those selected may be restricted with the Only command. 31
Updating an active focus point
Advertisement
The following procedure illustrates how to update a focus point that has been placed on stage.
Keystrokes:
1. Press [Stage]. 2. Press [Focus Point] [4] [Full].
Action:
Selects Stage display mode Places focus point 4 on stage at full
3. Modify channel levels as Sets focus point levels or selects desired. additional channels and sets their levels 4. Press [S2], Update. Prompt reads:
To update cue, select number and press ENTER To cancel, press CLEAR
5. To restrict channels in the update, use Only here.a Restricts channels in update Prompt reads:
Select channel number(s) To cancel, press CLEAR (Press 0 to reselect all non-zero channels)
6. Press [Focus Point] [4] [Enter]. Updates focus point 4
31. For an explanation of captured channels, see Channel modes, page 52. For an explanation of Only, see The Only command, page 8.
Updating a recorded focus point
You need not place a focus point on stage to update it. The following procedure illustrates how to update any recorded focus point.
Keystrokes:
1. Press [Stage]. 2. Press [S8], Fixture, [8], [Full].
Action:
Selects Stage display mode Sets fixture 8 intensity to full
3. Press [Only] [Color] [At] Sets levels for fixture 8 color category [5][0]. at 50% 4. Press [S7], Return. Returns to main Stage softkeys 5. Press [S2], Update, [Focus Selects focus point 3 to update
Point] [3]. Prompt reads:
To update focus point, select number and press ENTER To cancel, press CLEAR
6. To restrict channels in the update, use Only here.a Selects channels to update Prompt reads:
Select channel number(s) To cancel, press CLEAR (Press 0 to reselect all non-zero channels)
7. Press [Enter]. Updates focus point 3
