1 minute read

Group spreadsheet

Next Article
Control interfaces

Control interfaces

Go to the group spreadsheet as follows.

Keystrokes:

Advertisement

Actions:

1. Press [Blind] [Group] Selects the group mode of the blind [Enter]. display 2. Press [S3], Spreadsheet. Shows the group spreadsheet

Creating a group

After entering the group spreadsheet as explained above, create a group as follows.

Keystrokes: Actions:

1. Press [S2], Create Group. Prompt reads:

To create a new group, select group number and press ENTER To cancel, press CLEAR

2. Press [5] [Enter]. Selects group 5 Prompt reads:

Select channel(s)

3. Press [5] [Thru] [1][0]. Selects channels to include 4. Press [Full]. Sets channels 5 through 10 to full Prompt reads:

Enter intensity

5. Repeat steps 3-4. Continue selecting channels and setting levels until done

Editing groups

You may edit a group in the group spreadsheet. Follow all steps in the procedure under Creating a group on the previous page except Press [S1], Select Group in step 1.

Deleting groups

After entering the group spreadsheet as explained on the previous page, delete a group as follows.

Keystrokes: Actions:

1. Press [S6], Delete Group. Prompt reads:

To delete group(s), select number(s) and press ENTER To cancel, press CLEAR

2. Press [5] [And] [6] [Enter]. Selects groups 5 and 6 Prompt reads:

To confirm, press ENTER To cancel, press CLEAR

3. Press [Enter] [Enter]. Deletes groups 5 and 6

Replacing channel level

As a convenient editing technique, you may specify a particular level to change for a channel or number of channels. After entering the group spreadsheet as explained on the previous page, replace channel level as follows.

Keystrokes: Actions:

1. Press [S1], Select Group. Prompt reads:

Select group(s)

2. Press [5] [Enter]. Selects group 5 Prompt reads:

Select channel(s)

3. Press [5] [Thru] [1][0] [S3], Replace Level, [5][0].

Selects channels 5 through 10 at level 50 to change Prompt reads:

Select level to replace and press ENTER

4. Press [Enter]. Prompt reads:

Select new level and press ENTER

5. Press [Full] [Enter]. Changes all channels in the range 5 though 10 with level 50 to level full

This article is from: