Focus point spreadsheet

Go to the focus point spreadsheet as follows.

Keystrokes:

Actions:

1. Press [Blind] [Focus Point] Selects the focus point mode of the [Enter]. blind display 2. Press [S3], Spreadsheet. Shows the focus point spreadsheet

Creating focus points

After entering the focus point spreadsheet as explained above, create a focus point as follows.

Keystrokes: Actions:

1. Press [S2], Create Focus. Prompt reads:

To create a new focus point, select focus point number and press ENTER To cancel, press CLEAR

2. Press [5] [Enter]. Selects focus point 5 Prompt reads:

Select channel(s)

3. Press [5] [Thru] [1][0]. Selects channels to include Prompt reads:

Enter intensity

4. Press [Full]. Sets channels 5 through 10 to full 5. Repeat steps 3-4. Continue selecting channels and setting levels until done

Editing focus points

You may edit a focus point in the focus point spreadsheet. Follow all steps in the procedure under Creating a focus point on the previous page except Press [S1], Select Focus in step 1.

Deleting in spreadsheet

After entering the focus point spreadsheet as explained on the previous page, delete a focus point as follows.

Keystrokes: Actions:

1. Press [S6], Delete Focus. Prompt reads:

To delete focus point(s), select number(s) and press ENTER To cancel, press CLEAR

2. Press [5] [And] [6] [Enter]. Selects focus points 5 and 6 Prompt reads:

To confirm, press ENTER To cancel, press CLEAR

3. Press [Enter] [Enter]. Deletes focus points 5 and 6

Replacing channel level

As a convenient editing technique, you may specify a particular level to change for a channel or number of channels. After entering the focus point spreadsheet as explained on the previous page, replace channel level as follows.

Keystrokes: Actions:

1. Press [S1], Select Focus. Prompt reads:

Select focus point(s)

2. Press [5] [Enter]. Selects focus point 5 Prompt reads:

Select channel(s)

3. Press [5] [Thru] [1][0] [S3], Replace Level, [5][0].

Selects channels 5 through 10 at level 50 to change Prompt reads:

Select level to replace and press ENTER

4. Press [Enter]. Prompt reads:

Select new level and press ENTER

5. Press [Full] [Enter]. Changes all channels in the range 5 though 10 with level 50 to level full