boco Welding Protection. proFlex4®: For maximum safety.
boco Welding Protection. The right choice is all-important. Type of welder protection clothing
Selection criteria Based on the method
Based on the ambient conditions
Manual welding techniques with minimal formation of welding splatter and metal drips, e.g.: Gas fusion strips TIG welding MIG welding Microplasma welding Hard soldering Spot-welding MMA welding (manual metal arc welding) with a rutile-coated electrode
Operation of machines, e.g.: Oxygen cutting machines Plasma cutting machines Resistance welding machines Machines for thermal spray welding Table welding
Manual welding techniques with significant formation of welding splash and metal drips, e.g.: MMA welding (basic coated electrode or with cellulose coated electrode) MAG welding (with CO2 or mixed gases) MIG welding (with heavy current) Self-protecting flux-cored arc welding Plasma cutting Gouging Oxygen cutting Thermal spray welding
Operation of machines, e.g.: Constricted spaces Overhead welding or cutting or working in comparable forced postures
boco Welding Protection. Essential safety standards for your protection.
DIN EN ISO 11611 Protective clothing for use in welding and allied processes This clothing provides the necessary protection if the wearer is exposed to small metal splashes or comes into brief contact with flames or ultraviolet radiation when performing his job. It is designed for persons who perform welding, cutting or other allied processes. As a rule, the protective effect is achieved thanks to the combination of flameretardant fabric and specific processing characteristics.
DIN EN 1149 Protective clothing with electrostatic properties When worn, this protective clothing reduces the electrostatic charging of persons to a minimum and thus also the risk of discharge sparks. Sparks which result from such discharging present a major risk anywhere where explosive atmospheres can form. The protective clothing is capable of conducting static electricity.
boco Welding Protection. Essential safety standards for your protection. DIN EN 1149-1 With this test method, surface resistivity is calculated in ohms. The following applies: Electrical charges can be discharged more effectively and quicker the lower the resistance. This method can only be used for conductive materials such as carbon or metal fibres.
DIN EN 1149-3 With this test method, the speed of charge decay is measured. Here the time taken for the initial charge to be reduced by 50% is calculated. The quicker the charge decay the better. Moreover, the screen attenuation effectiveness against the electrical field is measured. Here too: the greater the effectiveness the better.
DIN EN 1149-5 In the most stringent EN 1149 test standard, performance properties are stipulated for both the material and the design of the protective clothing. The material must be certified to either EN 1149-1 or EN 1149-3.
boco Welding Protection. proFlex4®: For maximum safety. Cutting and welding; heat and fire: Whenever the going gets tough, it is vital that day-to-day challenges do not become uncontrolled risks. The boco proFlex4® collection is welder protective clothing which feels as light and comfortable as everyday clothes. What’s more, thanks to its special design, proFlex4+® is both lightweight and comfortable to wear. The light fabric in the back and modular reinforcements made of high-tech fabric in the areas subject to the greatest stresses and strains mean the wearer is protected at all times.
boco Welding Protection. proFlex4®: For maximum safety. Product advantages: Impressive tear strength and high degree of cut protection Good insulation against heat Permanent flame-retardant properties No afterflame or afterglow and no melt formation Antistatic properties Protection against Class 1 arc faults Protection against liquid chemical splash With pockets for kneepads
boco Welding Protection. proFlex4®: For maximum safety. Field tests: The Profi Line Protection range has been successfully tested at the GSI-SLV’s Rhein-Ruhr Training Centre in Gelsenkirchen, Germany.
boco Class 1 Welding Protection Safety standards overview. Click on one of the pictures for the detailed view.
Work Jacket proFlex4速
Welding Cape proFlex4速
Waistband Trousers
Dungarees
proFlex4速
proFlex4速
Work Jacket proFlex4®
Turn-down collar Covered snap closure Safety standards in front 2 chest pockets Inside chest pocket on left side 2 side pockets Adjustable sleeves Reflective stripes on sleeves and on the back Royal Art.-no.: 1030013010
Titan Art.-no.: 1030013013
DIN EN ISO 11611 Welding protection
DIN EN 1149-5 Protective clothing – electrostatic properties
DIN EN ISO 11612 A1, B1, C1, E2, F1 Heat and Flame Protection
DIN IEC 61482-1-2 Klasse 1 4kA Arc Fault Protection
Sizes: 23 – 30 | 42 – 70 | 90 – 118 Material: 40 % Nomex® | 18 % Kevlar® | 2 % P140 (Nylon mit Carbonkern) | 40 % Viskose FR
Titan/Steel grey Art.-no.: 1030013014
DIN EN 13034 Type 6 Chemical protection
Welding Cape proFlex4®
Stand-up collar Adjustable sleeves Open back Cape adjustable in back with fixlock buckle Titan/Steel grey Art.-no.: 1030009813 DIN EN ISO 11611 Welding protection
DIN EN 1149-5 Protective clothing – electrostatic properties
Sizes: S – XXXL Material: 40 % Nomex® | 18 % Kevlar® | 2 % P140 (Nylon with carbon core) | 40 % viskose FR
DIN EN ISO 11612 A1, B1, C1, F1 Heat and Flame Protection
Dungarees proFlex4®
Extendible elastic braces with quick-release buckle Dungaree patch pocket with flap Waistband with 5 belt loops 2 patch hip pockets Leg pocket left folding rule pocket with flap on right side Safety standards on folding rule pocket ergonomically designed pockets for kneepads reflective stripes around the leg at calf height
Royal Art.-no.: 1030013008
Titan/Steel grey Art.-no.: 1030013011
DIN EN ISO 11611 Welding protection
DIN EN 1149-5 Protective clothing – electrostatic properties
DIN EN ISO 11612 A1, B1, C1, E2, F1 Heat and Flame Protection
DIN IEC 61482-1-2 Class 1 4kA Arc Fault Protection
Sizes: 23 – 30 | 42 – 70 | 90 – 118 Material: 40 % Nomex® | 18 % Kevlar® | 2 % P140 (Nylon with carbon core) | 40 % viscose FR
DIN EN 13034 Type 6 Chemical protection
Waistband Trousers ® proFlex4 Waistband with 5 belt loops
Covered snap closure 2 side pockets 2 back pockets Leg pocket on left side Folding rule pocket on right side Safety standards on rule pocket Ergonomic knee padding pockets Reflective stripes around the leg at calf height
Royal Art.-no.: 1030013009
Titan Art.-no.: 1030013012
DIN EN ISO 11611 Welding protection
DIN EN 1149-5 Protective clothing – electrostatic properties
DIN EN ISO 11612 A1, B1, C1, E2, F1 Heat and Flame Protection
DIN IEC 61482-1-2 Class 1 4kA Arc Fault Protection
Sizes: 23 – 30 | 42 – 70 | 90 – 118 Material: 40 % Nomex® | 18 % Kevlar® | 2 % P140 (Nylon with carbon core) | 40 % viskose FR
DIN EN 13034 Type 6 Chemical protection
boco Class 2 Welding Protection Safety standards overview. Click on one of the pictures for the detailed view.
Work Jacket
Waistband Trousers
Dungarees
proFlex4+®
proFlex4+®
proFlex4+®
Work Jacket proFlex4+®
Turn-down stand-up collar with press stud for closing Concealed zip 2 patch breast pockets with flaps and 2 concealed press studs Inside breast pocket with zip on the right lnside breast pocket with press stud for closing on the left Reflective piping on the chest and back 3 possibilities for adjusting cuff diameter with strap and press studs Longer back Doubling thanks to module solution on the areas of the Dark blue/Titanium body at particular risk in the front and on the sleeves Art.-no.: 1030012377 DIN EN ISO 11611 Welding protection Class 2
DIN EN 1149-5 Protective clothing – electrostatic properties
Sizes: 21 – 32 | 42 – 64 | 90 – 114 Material: 54 % modacrylic fibre | 44 % cotton | 2 % carbon
DIN EN ISO 11612 A1, B1, C1, F1 Heat and Flame Protection
Dungarees proFlex4+®
Extendible elastic braces with quick-release buckles 1 dungaree patch pocket with reflective piping, flap with 2 concealed press studs and hook & loop fastener for closing 2 lateral slash pockets 2 patch hip pockets with a flap and 2 press studs for closing Waistband with 5 belt loops 1 patch pocket for ruler with a flap and hook & loop fastener for closing on the right 1 leg pocket with a flap and 2 concealed press studs for closing on the left 2 ergonomically designed pockets for kneepads with a hook & loop fastener for closing | Reflective piping down the sides Doubling thanks to module solution on the areas of the body at particular risk in the area of the hems and on the thighs Dark blue/Titanium Art.-no.: 1030012379 DIN EN ISO 11611 Welding protection
DIN EN 1149-5 Protective clothing – electrostatic properties
Sizes: 21 – 32 | 42 – 64 | 90 – 114 Material: 54 % modacrylic fibre | 44 % cotton | 2 % carbon
DIN EN ISO 11612 A1, B1, C1, F1 Heat and Flame Protection
Waistband Trousers ® proFlex4+ 2 lateral slash pockets
2 patch hip pockets with a flap and 2 press studs for closing Waistband with 5 belt loops and concealed button 1 patch pocket for ruler with a flap and hook & loop fastener for closing on the right 1 leg pocket with a flap and 2 concealed press studs for closing on the left 2 ergonomically designed pockets for kneepads with a hook & loop fastener for closing Reflective piping down the sides Doubling thanks to module solution on the areas of the body at particular risk in the area of the hems and on the thighs Dark blue/Titanium Art.-no.: 1030012378 DIN EN ISO 11611 Welding protection
DIN EN 1149-5 Protective clothing – electrostatic properties
Sizes: 21 – 32 | 42 – 64 | 90 – 114 Material: 54 % modacrylic fibre | 44 % cotton | 2 % carbon
DIN EN ISO 11612 A1, B1, C1, F1 Heat and Flame Protection
boco Protection Multifunctional protection in the workplace. Whether in the metalworking sector, industry or
Only protective clothing which is professionally cared
utility companies, the wearing of protective clothing
for and maintained can comply with statutory
is a legal requirement in many professions and
requirements in the long term. With the intro-duction
areas. Personal protective equipment (PPE) protects
of a certified process workflow in accordance with
employees against corresponding hazards and
the ISO 9001 standard*, CWS-boco is now helping
increases their safety in the workplace.
wearers and companies to meet the requirements for long-lasting protection.
boco high-visibility clothing offers a customised and standard-compliant solution with the latest fits for all protective areas. Professional, safe and ergonomic: boco’s Protection collection complies with a wide range of current standards, offers outstanding protection and is multifunctional. The individual models are durable, light, comfortable to wear and available to rent in the full service scheme. This ensures compliance with safety aspects for long-
(* Only valid for Germany)
boco rental service All-round carefree. The rental service for boco workwear is the perfect
In addition, we also check the items, repairing or
solution for keeping your employees looking smart
replacing any articles as necessary. Week after week
and tidy. Every member of staff receives their own
with fixed appointments: punctually and reliably. A
uniform including a spare set of clothes. There are no
chip integrated in the clothing allows us to deliver
procurement costs and you also save yourself the
the items back to the rightful owner every time. boco
considerable administrative efforts associated with
also makes an active contribution to protecting the
storing and caring for the items. Instead, your worn
environment through the use of gentle washing
clothing is simply collected by your personal CWS-
procedures and certified processes* for
boco service driver and always
environmental and quality management. As such,
delivered back to the respective lockers clean and
the boco rental service also takes the pressure off
fresh when you require it. As part of the rental
you!
service, CWS-boco collects, maintains and washes the clothing professionally.
(* Only valid for Germany)
boco rental service All-round carefree. The rental service for boco workwear is the perfect solution for keeping your employees looking smart and tidy. Every member of staff receives their own uniform including a spare set of clothes. There are no procurement costs and you also save yourself the considerable administrative efforts associated with storing and caring for the items. Instead, your worn clothing is simply collected by your personal CWS-boco service driver and always delivered back to the respective lockers clean and fresh when you require it. As part of the rental service, CWS-boco collects, maintains and washes the clothing professionally.
Product development taking suitable materials and standard specifications into consideration Personal alterations and labelling taking standard specifications into account A specially adapted washing and drying process and, if necessary, refitting of the products in accordance with the applicable standards
Quality inspections and laboratory tests
Professional repairs using materials which correspond to the applicable standards Delivery to the wearer’s personal locker
boco badge service Put your good name on display. The boco badge service allows you to personalise the workwear. If you so wish, we can optionally equip your clothing with a company or association logo or a name badge. By customising your clothing to fit your corporate image, we contribute to the holistic and professional public image of your company. This increases brand recognition among your customers and fosters trust and confidence.
The personal relationship between the end customer and your employee is important: Apart from logos, the boco Association badges Name badges badge service also offers personalisation of your workwear with a corresponding badge. Membership of an association is a clear Equipname your employees with the boco name indication that the company is an expert badges so they can be addressed The same applies for association badges. As a close partner of the trade, boco has integrated specific features into in its trade personally workwear for Make a wideyourself range of specialist clothing Select the colour of your choice stand out from your collections. competitors Embroidered badges Logo combination Choose from the standard boco shapes Combine the embroidered badge and (rectangular, square or round) name badge for the perfect company look We can also equip your workwear optimally with the badge of your choice
On-site customer service We are there for you! As one ofAnthracite the leading service partners for washroom
Your personal contact:
hygiene and textile services, optimal customer service isAnthracite/Grey a matter particularly close to our hearts. As
Max Mustermann
such, there are seven regional teams at CWS-boco
Sales – North
Brown/Light brown taking care of our customers’ individual wishes and
requirements. You can also find further information on our website: Visit page Marine
Royal blue/Marine
Signal red/Anthracite
Tel.: +49 (0)40 040404040 Mobile: +49 (0)40 040404040 m.mustermann@cws-boco.de