Dotco material removal by Joinmax

Dallas, TX Cooper Power Tools Sales & Service Center 1470 Post & Paddock Grand Prairie, TX 75050 Tel: (972) 641-9563 Fax: (972) 641-9674 Detroit, MI Cooper Power Tools Sales & Service Center 4121 North Atlantic Blvd. Auburn Hills, MI 48326 Tel: (248) 391-3700 Fax: (248) 391-6295

Cooper Power Tools P.O. Box 1410 Lexington, SC 29071-1410 USA Phone: 800-845-5629 803-359-1200 Fax: 803-359-0822 Cooper Power Tools 4121 North Atlantic Blvd. Auburn Hills, MI 48326 USA Phone: (248) 391-3700 Fax: (248) 391-6295 Cooper Power Tools 5925 McLaughlin Road Mississauga, Ontario Canada L5R 1B8 Phone: (905) 501-4785 Fax: (905) 501-4786

Houston, TX Cooper Power Tools Sales & Service Center 6550 West Sam Houston Parkway North, Suite 200 Houston, TX 77041 Tel: (713) 849-2364 Fax: (713) 849-2047 Lexington, SC Cooper Power Tools 670 Industrial Drive Lexington, SC 29072 Tel: (800) 845-5629 Tel: (803) 359-1200 Fax: (803) 358-7681

Cooper Power Tools de México S.A. de C.V. Libramiento La Joya No. 1 Bodega No. 2 Esq. Politécnico Barrio San José Cuautitlán, Edo de México C.P. 54870 Phone: +52-55-5899-9510 Fax: +52-55-5870-5012 Cooper Tools Industrial Ltda. Av. Liberdade, 4055 Zona Industrial - Iporanga 18087-170 Sorocaba, SP Brazil Tel: +55-15-3238-3929 Fax: +55-15-228-3260

SP-102-EN 0508 3.5M B Specifications subject to change without notice. 2008 COOPER INDUSTRIES, INC.

York, PA Cooper Power Tools Sales & Service Center 3990 East Market Street York, PA 17402 Tel: (717) 755-2933 Fax: (717) 757-5063

Canada Cooper Power Tools Sales & Service Center 5925 McLaughlin Road Mississauga, Ont. L5R 1B8 Canada Tel: (905) 501-4785 Fax: (905) 501-4786

Cooper Power Tools SAS Zone industrielle – B.P. 28 77831 Ozoir-la-Ferrière Cedex France Téléphone: +33-1-6443-2200 Téléfax: +33-1-6440-1717

Cooper Tools Hungária Kft. Berkenyefa sor 7 H-9027 Györ Hungary Tel: +36-96-505 300 Fax: +36-96-505 301

Cooper Power Tools GmbH & Co. OHG Postfach 30 D-73461 Westhausen Germany Phone: +49 (0) 73 63/ 81-0 Fax: +49 (0) 73 63/ 81-222 E-Mail: sales-de@cooperindustries.com

Cooper (China) Co., Ltd. 955 Sheng Li Road, Heqing Pudong, Shanghai China 201201 Tel: +86-21-28994176 +86-21-28994177 Fax: + 86-21-51118446

Dotco • Cleco ®

Material Removal Tools

www.cooperpowertools.com

SP-102-EN 0508 3.5M B

Cooper Industries, Ltd. 600 Travis, Ste. 5800 Houston, TX 77002-1001 P: 713-209-8400 www.cooperindustries.com

Seattle, WA Cooper Power Tools Sales & Service Center 2865 152nd Ave N.E. Redmond, WA 98052 Tel: (425) 497-0476 Fax: (425) 497-0496

SP-102-EN 0508 3.5M B

Note: All locations may not service all products. Please contact the nearest Sales & Service Center for the appropriate facility to handle your service requirements.

DOTCO • CLECO MATERIAL REMOVAL TOOLS

Sales & Service Centers

Table of Contents ISO-9001 “Quality System Certified” . . . . . . . . . . . . . 2 Model Number Index . . . . . . . . . . . . . . . . . . . . . . . . . 3 Tool Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Grinders Introduction . . . . . . . . . . . . . . . . . . . . . . . . 8 Precision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Inline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Inline Extended . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Right Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Cone or Plug Wheel . . . . . . . . . . . . . . . . . . . . . . 18 Type 1 Wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Type 27 Depressed Center Wheel . . . . . . . . . . . 21 Grinder Accessories . . . . . . . . . . . . . . . . . . . . . . 24 Sanders Introduction . . . . . . . . . . . . . . . . . . . . . . . . 28 Random Orbital . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Orbital . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Right Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Buffers & Polishers . . . . . . . . . . . . . . . . . . . . . . . 36 Sander, Buffer & Polisher Accessories . . . . . . . . 38 Drills Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 In-Line & Right Angle . . . . . . . . . . . . . . . . . . . . . 42 Pistol Grip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Right Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Drill Accessories . . . . . . . . . . . . . . . . . . . . . . . . . 48 Routers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Router Accessories . . . . . . . . . . . . . . . . . . . . . . 52 Saws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Saw Accessories . . . . . . . . . . . . . . . . . . . . . . . . 56 Percussion Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Percussion Tool Accessories . . . . . . . . . . . . . . . 62 Specialty Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Rivet Shavers . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Shears and Scissors . . . . . . . . . . . . . . . . . . . . . . 60 Nibblers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Lint Pickers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Hole Grinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 General Accessories . . . . . . . . . . . . . . . . . . . . . . . . 63 Training & Service . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Sales & Service Centers . . . . . . . . . . . . . . . . . . . . . 70 Website . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

ISO 9001

Cooper Power Tools Division has attained ISO 9001 Quality System Certification for seven of our facilities. The driving force behind the implementation of the Quality System is the commitment “to provide our customers with the best value delivered by offering only products and services that meet or exceed their expectations”.

Lexington, South Carolina

Dayton, Ohio

Braunschweig, Germany

Hicksville, Ohio

Springfield, Ohio

Westhausen, Germany

Ozoir-la-Ferrière, France

Model Number Index Model

Page

10B1200-32..................... 33 10B2500-01..................... 13 10K2752-84..................... 21 10L1000-36..................... 13 10L1001-36...................... 13 10L1003-36..................... 13 10L1080-36..................... 13 10L1081-36...................... 13 10L1082-36...................... 13 10L1101-36...................... 15 10L1112-36...................... 15 10L1181-36...................... 15 10L1200-32..................... 33 10L1200-36.................17,33 10L1201-36..................17,33 10L1280-36..................17,33 10L1281-36..................17.33 10L2000-01..................... 13 10L2080-01..................... 13 10L2500-01..................... 13 10L2502-01..................... 13 10L2580-01..................... 13 10L2750-80..................... 33 10L2751-80..................... 33 10L2760-80..................... 37 10L9500-36......................11 10R0400-13......................11 10R0400-18......................11 10R0401-13......................11 10R0401-18......................11 10R0412-18.......................11 10R9000-03.....................11 10R9000-03.....................11 10T4309-62..................... 51 10T4316-62...................... 51 10T4318-62...................... 51 116GLF-115A-C4............. 17 116GLF-115A-D3T4......... 21 116GLF-115A-D3T45....... 21 116GLF-115A-W3T4........ 20 116GLFB-135A-W3T4..... 20 116GLFB-250-C4............ 13 116GLFC-165A-C4......... 17 116GLSB-135A-D3T4..... 21 116GLSB-250-C4........... 13 11Q2000.......................... 61 11T4318-62...................... 51 1260DVL-07..................... 23 12L1000-36..................... 13 12L1000-36RT................. 51 12L1001-36...................... 13 12L1001-36RT................. 51 12L1003-36...................... 13 12L1010-36...................... 61 12L1031-36...................... 61 12L1080-36...................... 13 12L1081-36...................... 13 12L1082-36...................... 13 12L1092-01...................... 37 12L1093-01...................... 37 12L1101-36...................... 15 12L1112-36....................... 15 12L1181-36...................... 15 12L1200-32...................... 33 12L1200-36..................17,33 12L1201-32...................... 33

Model

Page

12L1201-36..................17,33 12L1280-32...................... 33 12L1280-36..................17,33 12L1280-36B2................. 35 12L1281-32...................... 33 12L1281-36..................17,33 12L1281-36B2................. 35 12L1380-36..................17,33 12L1381-36..................17,33 12L1382-36..................17,33 12L1382-36B2................. 35 12L1382-36B4................. 35 12L1820-03...................... 31 12L1820-05...................... 31 12L1820-06...................... 31 12L1820-13...................... 31 12L1820-15...................... 31 12L1820-16...................... 31 12L1820-25...................... 31 12L1820-26...................... 31 12L1823-05...................... 31 12L1823-06...................... 31 12L1823-15...................... 31 12L1850-07...................... 31 12L1850-07HL................. 31 12L1850-09..................... 31 12L1850-17...................... 31 12L1850-19...................... 31 12L1850-27...................... 31 12L2000-01..................... 13 12L2000-01RT................ 51 12L2001-01..................... 13 12L2001-01RT................. 51 12L2002-01..................... 13 12L2062-96..................... 61 12L2065-90..................... 55 12L2080- 01.................... 13 12L2080-01RT................ 51 12L2081-01..................... 13 12L2081-01RT................. 51 12L2082-01..................... 13 12L2218-36.................17,33 12L2240-90..................... 55 12L2251-80..................... 33 12L2252-01..................... 17 12L2384-01..................... 17 12L2384-B1..................... 35 12L2384-K1 (Kit)............. 35 12L2500-01..................... 13 12L2500-01RT................ 51 12L2502-01..................... 13 12L2542-01..................... 13 12L2562-01..................... 13 12L2580-01..................... 13 12L2580-0124RT............ 51 12L2580-01RT................ 51 12L2582-01..................... 13 12L2582-0124RT............. 51 12L2582-01RT................. 51 12L2592-01..................... 37 12L2593-01..................... 37 12L2594-01..................... 37 12L2600-01..................... 15 12L2682-01..................... 15 12L2718-28...................... 20 12L2718-36..................... 17

Model

Page

12L2750-80..................... 33 12L2751-80...................... 33 12L2752-01..................... 17 12L2752-80..................... 33 12L2760-80................33,37 12L2761-80..................... 33 12L2762-80................33,37 12L4018-01..................... 51 12L4203-80..................... 37 12R0380-13......................11 12R0380-18......................11 12R0400-13......................11 12R0400-18......................11 12R0410-13......................11 12R0410-18......................11 12R0500-36.................... 13 12R9180-03......................11 12R9180-08......................11 12R9180-43......................11 12R9180-48......................11 12S1008-36..................... 13 12S1273-03..................... 55 12S1274-03..................... 55 12S1282-02..................... 55 12S1283-02..................... 55 12S1288-02..................... 55 12S2674-2A..................... 15 12S2749-01..................... 55 12S2774-02..................... 55 12S2792-01..................... 55 12S2792-02..................... 55 12S2794-01..................... 55 12S2794-02..................... 55 12S4216-01..................... 55 12S4218-01..................... 55 12S4225-02..................... 55 12S4225-03..................... 55 135DPV-14B-50.............. 45 135DPV-14B-51............... 45 135DPV-28B-51.............. 45 135DPV-7B-43................ 45 135DPV-7B-50................ 45 136BSV-4........................ 55 136GEL-240-C4.............. 15 136GEL-240-P3T............ 18 136GLF-115A-D3T4........ 21 136GLF-250-C4.............. 13 136GLFB-135A-W3T4..... 20 136GLR-115A-C4............ 17 136GLR-115A-D3T45...... 21 136GLR-115A-W3T4....... 20 136GLR-150-W3T4......... 19 136GLR-180-C4.............. 13 136GLR-180-W3T4......... 19 136GLR-250-C4............. 13 136GLS-115A-D3T4........ 21 136GLS-115A-W3T4....... 20 136GLS-240-C4............. 13 136GLSB-135A-D3T4..... 21 136GLSB-135A-W3T4.... 20 136VGL-115-D3T4........... 23 136VGL-135-D3T4........... 23 136VGL-180-D3T3.......... 23 14CFS60-95.................... 60 14CFS60-98.................... 60 14CFS90-38.................... 43

Model

Page

14CFS91-38.................... 43 14CFS92-38.................... 43 14CFS93-38.................... 43 14CFS93-98.................... 60 14CFS93-99.................... 60 14CFS94-38.................... 43 14CFS95-38.................... 43 14CFS96-38.................... 43 14CFS97-38.................... 43 14CHL92-38................. 45 14CHL92-40................ 45 14CHL92-51................. 45 14CHL92-53................. 45 14CHL98-38................. 45 14CHL98-40................. 45 14CHL98-51................. 45 14CHL98-53................. 45 14CNL60-95.................... 60 14CNL90-38.................... 43 14CNL90-40.................... 43 14CNL91-40.................... 43 14CNL91-51.................... 43 14CNL92-40.................... 43 14CNL92-51.................... 43 14CNL95-40.................... 43 14CNL95-51.................... 43 14CNL97-40.................... 43 14CNL97-53.................... 43 14CNL98-38.................... 43 14CNL98-40.................... 43 14CSL90-38.................... 43 14CSL90-40.................... 43 14CSL91-38.................... 43 14CSL91-40.................... 43 14CSL92-38.................... 43 14CSL92-40.................... 43 14CSL95-40.................... 43 14CSL95-51.................... 43 14CSL97-40.................... 43 14CSL97-51..................... 43 14CSL98-38.................... 43 14CSL98-40.................... 43 14G-810........................... 10 14G-830........................... 10 15DP-1.6B-53.................. 45 15DP-14B-49................... 45 15DP-4B-53.................... 45 15DP-8B-53.................... 45 15GELC-140-P3T ........... 18 15GELC-180-C4............. 15 15GELC-180-P3T............ 18 15GELC-180-P5.............. 18 15GL-60A-D5T7.............. 21 15GL-60A-W5T7............. 20 15L1488-38...................... 43 15L1489-38...................... 43 15LF081-38..................... 43 15LF082-38..................... 43 15LF083-38..................... 43 15LF087-38..................... 43 15LF281-52...................... 47 15LF281-62..................... 47 15LF282-52..................... 47 15LF282-62..................... 47 15LF283-52..................... 47

Model

Page

15LF283-62..................... 47 15LF284-62..................... 47 15LF285-52..................... 47 15LF285-62..................... 47 15LF286-52..................... 47 15LF286-62..................... 47 15LF287-52...................... 47 15LF287-62..................... 47 15LN281-52..................... 47 15LN281-62..................... 47 15LN282-52..................... 47 15LN282-62..................... 47 15LN283-52.................... 47 15LN284-52.................... 47 15LN284-62.................... 47 15LN285-52.................... 47 15LN286-52.................... 47 15LN287-52..................... 47 15LN288-52.................... 47 15LN288-62.................... 47 15LS281-52..................... 47 15LS281-62..................... 47 15LS282-52..................... 47 15LS282-62..................... 47 15LS283-52..................... 47 15LS283-62..................... 47 15LS284-62..................... 47 15LS285-62..................... 47 15LS286-62..................... 47 15LS287-52..................... 47 15LS287-62..................... 47 15VSB-60........................ 23 15Z-710............................ 10 15Z-720............................ 10 1760BVL-07..................... 23 1760BVL-09..................... 23 1760HL-16........................ 19 18G-810D........................ 10 1960BVL-09..................... 23 1960HG-16...................... 19 220G-600-C2.................. 10 220G-600-C2-K.............. 10 31AR-530......................... 21 31G-510........................... 13 31GR-510......................... 13 5120BHL-P...................... 18 560BHL-16....................... 19 560BHX-16...................... 19 590BHL-P........................ 18 B1-C-LT........................... 59 B1-CNB-LT-RD............... 59 B1-CNB-LT-RD-K........... 59 B1-C-PT........................... 59 BR-C-LT.......................... 59 CH-30-HX....................... 58 CH-30-HX-QC................ 58 CH-30-RD....................... 58 CH-30-RD-QC................ 58 CH4-30-RD..................... 58 CH4-30-RD-QC.............. 58 F2-PT-RT-B..................... 58 F4-PT-RT-B..................... 58 SC 3A............................... 58

Tool Operation Warranty Cooper warrants products and parts sold by it, insofar as they are of its own manufacture, against defects of material and workmanship, under normal use and service in accordance with its written instructions, recommendations, and ratings for installation, operation, maintenance, and service of products, for a period of ONE YEAR FROM THE DATE OF INITIAL USE, BUT IN NO EVENT SHALL THE WARRANTY EXCEED 24 MONTHS FROM DATE OF DELIVERY TO DISTRIBUTOR. Proof of Purchase with shipment date must be furnished by the user to validate the warranty. This warranty applies only to products manufactured by Cooper and specifically excludes products manufactured by others. Products not manufactured by Cooper are warranted only to the extent and in the manner warranted to Cooper by the manufacturer and then

only to the extent Cooper is able to enforce such warranty. Cooper’s warranty with respect to products manufactured by it is limited to the repair or replacement, as Cooper may elect, of any defective part regarding which the Distributor has given 5 days written notice from the discovery of such defect. Installation and transportation costs are not included. Cooper shall have the option of requiring the return to it of the defective material, transportation prepaid, for inspection. No allowance will be made for repairs without Cooper’s approval. COOPER MAKES NO OTHER WARRANTY OF ANY KIND WHATSOEVER, EXPRESSED OR IMPLIED, AND HEREBY DISCLAIMS ALL WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Lubrication Products CooperTools’ products are classified as non-hazardous manufactured items, defined in the OSHA 1910.1200 Hazard Communication Standard as “Articles”. These products, under conditions of normal use, do not release or cause exposure to a hazardous chemical. Under normal conditions of use, lubrication products sold separately for or used within these tools should not cause an exposure hazard. Refer to the Material Safety Data Sheet (M.S.D.S.) for Safety and Disposal Information. M.S.D.S. sheets are available upon request from CooperTools or on our website at www.coopertools.com. Cooper is also aware of, and complies with, the provisions of section 611 amendments to the Clean Air Act of 1990. No

ozone depleting chemicals have been used in the manufacture of our products. If you resell or distribute these products, you have the responsibility for ensuring that the Material Safety Data Sheets are provided to the purchaser. Proper lubrication is essential to the economical operation of pneumatic and electric tools. CooperTools products perform better and their life is extended by using the recommended lubricants. All lubricants that are listed in the accessory section of this catalog have undergone extensive testing and are recommended for use with CooperTools products.

Safe Work Practices Symbols

warning The signal word “WARNING” indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury; and, identifies safe work practices in this operating instruction. Observe these notes and proceed with special care in these cases. Pass all safety instructions on to other users. In addition to these instructions, the general local safety and accident prevention rules must be observed.

CAUTION The signal word “CAUTION” identifies all situations meriting special attention to ensure that guidelines, rules, hints and the correct work procedures are observed; and, to prevent damage to and destruction of the machine and/or parts.

Operational Instructions ■ These CooperTools portable and mountable tools are air powered. ALWAYS USE CAUTION WHEN USING POWER TOOLS FOR PERSONAL SAFETY.

■ Safety Code for Portable Air Tools – ANSI B1861 available from American National Standards Institute, Inc.; 1430 Broadway; New York, NY 10018

■ General Industry Safety & Health Regulations, part 1910, OSHA 2206, available from Superintendent of Documents; Government Printing Office; Washington, DC 20402

■ State and local regulations.

It is the user’s responsibility to refer and comply with ANSI B7.1

■ Use only genuine CooperTools replacements parts.

WARNING: Face & eye protection must be worn while operating power tools, per ANSI B186.1. Cutting tool maximum speed rating must be equal or exceed speed of air tool @ 90 psi (620 kPa). Follow cutting tool manufacturer’s mounting & operating instructions. Tools must be equipped with lock-off lever to be CE compliant.

warning

Before mounting any abrasive wheel, buffing wheel, wire brush, saw blade, flap wheel or other product, after all tool repairs and whenever a tool is issued for use, the RPM shall be checked with a tachometer to insure that its actual speed does not exceed rated speed. GOVERNED TOOLS IN USE ON THE JOB SHALL BE CHECKED AT LEAST ONCE EVERY TWENTY HOURS OF USE, OR ONCE WEEKLY, WHICHEVER IS MORE FREQUENT. Tachometers must be checked and calibrated on a regular basis according to the manufacturer’s recommendations.

warning Select proper guards for the application and mount securely and properly. Always mount guards so that abrasive debris, sparks, etc., are deflected away from the operator. Safety guards shall be in good condition. Any has been subjected to a wheel failure shall be replaced.

guard which discarded and

warning warning

Speed rating of abrasive wheel, buffing wheel, wire brush, saw blade, flap wheel, or other products used, must equal or exceed speed rating of tool.

Tools shall be used for purposes intended in their design. Refer to product catalog.

Exceeding the speed of accessories may cause failure of these products and serious operator injury.

Modification of the tool, or use of non specified accessories, may result in serious injury.

Wheels must clearly show the rated speed for its use, or must be discarded and not used.

warning Test and operate tools at 90 PSIG (620 kPa/6.2 bar) maximum pressure (measured at the tool while the tool is running) unless tool is marked otherwise. Use recommended air line filters – regulators – lubricators.

warning Wear impact resistant goggles or face shield at all times the tool is in operation. Other protective clothing shall be worn, if necessary, for spark protection deflection. SEE REGULATIONS.

Always remove the air supply hose before working on the tool or changing accessories

warning Immediately shut off the tool if unusual sound or vibration is detected. Remove and inspect the wheel and check the tool speed (RPM). Use of over-speeding grinder or unbalanced wheels may result in serious injury.

warning Each type of wheel, wire brush, saw blade, flap wheel and other product, has specific mounting procedures and regulations concerning spindles, flanges, blotters, collets, etc., which shall be used. Wheels must mount on tool’s spindle freely but not loosely. Spindle nuts must be tightened so as not to crack the wheel with too much force. Nuts must have all thread engagement.

warning Regularly inspect all wheels, etc., and discard cracked, chipped or otherwise damaged units. Redress out-of-balance wheels. See regulations.

warning High sound levels can cause permanent hearing loss. use hearing protection as recommended by your employer or OSHA. See 29CFR Part 1910.

warning Employ a safety program to provide inspection and maintenance of all phases of tool operation and air supply equipment in accordance with “Safety Code for Portable Air Tools,” ANSI B186.1. Make sure that all repairs are by trained personnel only and that these safety instructions are understood by the user.

warning When mounting any grinding wheel, the tool shall be run at operating speed with the safety guard in place, in a protected area such as under a work bench, for at least one minute. A damaged wheel should fail within that time. Any suspect wheel of unknown origin shall not be used and must be properly disposed.

It is the user's responsibility to refer and comply with ANSI B7.1

Dotco & Cleco...tools that work with operators...not against them. Performance

Versatility

Known for their durability, dependability and versatility, the Dotco & Cleco brands are viewed as the premier lines of material removal tools in the industrial marketplace. This is made possible by sound design and manufacturing techniques, producing tools that are small, comfortable and lightweight, yet can withstand tough treatment.

By using only a few motor types, a diverse line of Dotco products have been developed to handle a wide range of applications. Dotco tools also have a high interchangeability of parts making maintenance easier and more affordable.

Ergonomics With any repetitive task, workers can be subjected to discomfort and strain. Dotco & Cleco tools are designed so their form follows their function. Simply, tools that are more comfortable for the operator to use...tools that work with operators and not against them...including elastomer housings, low vibration, and low noise.

Dotcoâ&#x20AC;&#x2C6;& Cleco Quality Quality Dotco & Cleco power tools have been manufactured for 50 years. Understandably, we are proud of our tools. Proud that they have become the industry standard.

ISO 9001 Certified When we say our tools are built well, we really mean it. CooperTools manufacturing processes are ISO 9001 certified...that means the Dotco brand is manufactured to the highest standards.

Precision parts

Some operations require clean operating tools. That is why many Dotco tools can be run with oilless blades. Just another way we help you to make the best products possible.

Itâ&#x20AC;&#x2122;s simple, precision parts let operators manufacture precision products. Whether it is a spindle, a chuck, a motor or an angle head, our parts are manufactured from the finest materials available and are machined to the highest tolerances. It is understandable why we are proud of the .0005" runout on our collet model tools.

Low noise, low vibration

Parts interchangeability

Noise and vibration of power tools in manufacturing is an important issue. Dotco & Cleco tools have been designed to operate as quietly as possible, while providing substantial power. Vibration has been kept to a minimum by using precision parts and high quality bearings.

Maintenance of tools can be time consuming... and expensive. That is why Dotco products have been designed with high parts interchangeability. With fewer parts required to repair our tools, less inventory of parts is required and tools are easier to repair.

Oilless Blades

Grinders Introduction Performance, Versatility & Quality When it comes to fine finishing applications such as die grinding or de-burring, no tools are better suited for the job than Dotco® grinders. Dotco’s reputation for durability, dependability and versatility is among the highest for fine finishing applications. This is the result of years of continuous improvements in engineering design and manufacturing processes. Dotco grinders are designed with the operator in mind. They are small, lightweight and comfortable to use, without sacrificing durability. Plus, they incorporate elastomer coatings, and perfectly balanced moving parts to keep vibration to a minimum. This optimal combination of tool characteristics allows the operator to focus doing the best job possible, in the least amount of time.

Tough tools for tough jobs Cleco® and Buckeye® grinders meet the demanding requirements of industries including shipbuilding, pipe fabricating, transportation equipment manufacturing, and welding applications. Since these types of applications typically require a high material removal rate, Cleco and Buckeye grinders incorporate high horsepower/high RPM motors. To achieve maximum durability, Cleco and Buckeye grinders use top quality precision components, and motor assemblies are protected by either aluminum or steel housings.

Type 1 Cut Off Wheel Grinders Page 20 Right Angle Grinders Page 16

Precision Grinders Page 10

Inline Grinders Page 12

Extended Inline Grinders Page 14

Cone or Plug Wheel Grinders Page 18

WARNING: Face & eye protection must be worn while operating power tools, per ANSI B186.1. Cutting tool maximum speed rating must equal or exceed speed of air tool @ 90psi (620 kPa). Follow cutting tool manufacturer’s mounting & operating instructions. Tools must be equipped with lock-off lever to be CE compliant.

Grinder Abrasives Guide Precision Grinders, Carbide Bur and Mounted Wheel Grinders Used in finishing applications that require a high degree of durability. Cone and Plug Wheels Used for general purpose grinding work on mild steel, stainless steel, metal alloys, and cast steel. Applications include: ■ Grinding and smoothing ■ Beveling workpiece edges ■ Internal grinding fillets, corners prior to welding ■ Mild bending contours ■ General grinding in confined areas Type 1 Wheels Used on portable horizontal shaft tools. Applications Include: ■ Notch free grinding ■ Smoothing out weld seams ■ Removing seam lines ■ Pre-weld cleaning ■ Grinding concrete or from castings masonry products Type 1 Cut-Off Wheels Applications include cutting carbon and stainless steel, ferrous metals, and cast iron Type 6 & 11 Cup Wheels Used on right angle or vertical shaft tools. ■ Type 6 – Straight Cup Wheels ■ Type 11 – Flared Cup Wheels Type 27/28 Depressed Center Wheels Type 27 wheels are used at an angle to the workpiece between 30º and 45º. These wheels do not "flat grind." Type 28 wheels are saucer shaped wheels, which are contoured to provide a correct "built-in" grinding angle. Consequently, Type 28 wheels may be used for flat contact on the workpiece.

Type 1 Wheel Grinders Page 19

Type 27 Depressed Center Wheel & Cup Wheel Grinders Page 22

Type 27 Depressed Center Wheel Grinders Page 21 WARNING: Face & eye protection must be worn while operating power tools, per ANSI B186.1. Cutting tool maximum speed rating must equal or exceed speed of air tool @ 90psi (620 kPa). Follow cutting tool manufacturer’s mounting & operating instructions. Tools must be equipped with lock-off lever to be CE compliant.

Precision Grinders

50,000 – 100,000 RPM 0.06 – 0.2 hp (0.044 – 0.015 kW) ■ Variety of configurations to meet all

your application needs

■ Ideal for precision deburring and

10-90

metal removal

10-95

■ Turbine, governed and non-

governed models available

■ 12-03 right angle gearless model

to reduce maintenance and downtime

10-04

12R91

12-04

220g 12-03

14G

18G

220gL

WARNING: Maximum extension on 10-95 Series: 1/4” bur is 1-1/2” and 1/8” bur is 3/4” WARNING: Do not use grinding wheels or non-standard burs: failure to comply may shatter abrasive and cause serious injury.

Grinder Kits

15Z Series Air Marking Pen

220G-600-C2-K Kit includes grinder, hose, collet, collet wrench, cylindrical plain burr (413680), cylindrical radius end burr (413681), cone & taper burr (413682), and tree point burr (413683), carrying case.

■ 0.06 hp (0.044 kW) In-line Piston Motor 15z-710 ■ Sliding sleeve throttle ■ Carbide tipped stylus ■ Great for marking materials ranging from aluminum to titanium ■ Weighs only 4 oz.

14G-830 Kit includes grinder, hose, collet, collet wrench, two collet wrenches – 1006626, three grinding wheels – 1005327, 1005338, 1005344, dressing stone – 1004908, hose assembly – 1021393, carrying case – 1021743, filter-lubricator – 1020888

Model Number

Speed spm

Weight lbs.

kgs

15Z-710 20,000 .25

0.1

Length in.

Diameter in.

5.5 140 0.6 15

General Air Inlet: 1/8” NPT – Use 3/16” (4.7mm) I.D. hose All tools performance rated @ 90psi (620 kPa) air pressure. Standard Equipment Carbide tipped stylus Extra Equipment Replacement carbide tipped stylus 1018081 14G-830-kit

Air Marking Pen Kit 15Z-720 15Z-710 Air Marking

Pen, five (5) foot air hose assembly, 3/16” I.D. with 1/8” NPT fittings, two (2) 1/2” wrenches, carrying case

15Z-720 KIt

Precision Grinders Model Number With Collet Guard

Without Collet Guard

Wrenchless Chuck✢

Free Speed

Abrasives Capacity

rpm

Type Housing

Weight

Length

Collet Size

Air Inlet Size

lbs.

kgs

in.

A A

0.5 0.5

0.2 0.2

5.4 5.4

137 137

3mm 1/8”

1/8” 1/8”

1.9

0.9

5.8

147

1/8”

1/4”

C C

0.4 0.4

0.2 0.2

5.8 5.8

147 147

3mm 1/8”

1/8” 1/8”

10-90 Series – 0.06 hp (0.044 kW) – Front Exhaust – Turbine♦ 10L9500-36 10R9000-03 10R9000-03

100,000 3/16” Carbide Bur, 3/16” Diamond Pin 100,000 3/16” Diamond Pin

10-95 Series – 0.1 hp (0.074 kW) – Front Exhaust – Turbine♦ 10L9500-36

80,000 1/4” Carbide Bur, 3/16” Diamond Pin

12R91 Series W/O Overhose – 0.1 hp (0.074kw) – Governed – Front Exhaust – Turbine♦ 12R9180-03* 12R9180-08*

65,000** 1/8” Carbide Bur, 1/8” Diamond Pin 65,000** 1/8” Carbide Bur, 1/8” Diamond Pin

12R91 Series with 4ft (1.2m) Overhose – 0.1 hp (0.074kw) – Governed – Front Exhaust – Turbine♦ 12R9180-43* 12R9180-48*

65,000** 1/8” Carbide Bur, 1/8” Diamond Pin 65,000** 1/8” Carbide Bur, 1/8” Diamond Pin

C C

0.4 0.4

0.2 0.2

5.8 5.8

147 147

3mm 1/8”

1/8” 1/8”

C C

0.3 0.3

0.1 0.1

5.5 5.5

140 140

3mm 1/8”

1/8” 1/8”

A A

0.2 0.2

0.1 5.8* 147* 3mm 0.1 5.8* 147* 1/8”

1/8” 1/8”

C C

0.3 0.3

0.1 0.1

5.8 5.8

147 147

3mm 1/8”

1/8” 1/8”

0.1

4.6

118

1/8”

0.1

4.6

118

1/8”

0.3

0.1

3.9

1/8”

0.9

0.7

5.9

150

1/4”

1/8”

12-03 Series – 0.1 hp (0.074 kW) Gearless Right Angle – Rear Exhaust 12R0380-13* 12R0380-18

80,000 1/4” Carbide Bur, 1/4” Diamond Pin 80,000 1/4” Carbide Bur, 1/4” Diamond Pin

10-04 Series – 0.1 hp (0.074 kW) – Rear Exhaust 10R0401-13* 10R0401-18*

10R0400-13* 10R0400-18

10R0412-18

60,000 1/4” Carbide Bur, 1/4” Diamond Pin 60,000 1/4” Carbide Bur, 1/4” Diamond Pin

12-04 Series – 0.1 hp (0.074 kW) – Rear Exhaust 12R0410-13* 12R0410-18*

12R0400-13* 12R0400-18*

60,000 1/4” Carbide Bur, 1/4” Diamond Pin 60,000 1/4” Carbide Bur, 1/4” Diamond Pin

220G Series – 0.1 hp (.74 kW) – Push-Pull Start – Front Exhaust 220G-600-C2

60,000 1/4” Carbide Burr

220GL Series – 0.1 hp (.74 kW) – Lever Start – Front Exhaust 220GL-600-C2

60,000 1/4” Carbide Burr

14G Series – 0.1 hp (0.074 kW) – Front Exhaust 14G-810

50,000 1/4” Carbide Bur, 1/2” Mounted Wheel

18G Series – 0.2 hp (0.015 kW) – Front Exhaust 18G-810D

40,000 1/4” Carbide Bur, 1/2” Mounted Wheel

✢For length of 10R0412 wrenchless chuck models, add 0.4” (10mm) *Optional overhose lengths available, but not as Rapid Select **Governor-controlled speed Housing Guide: A=Aluminum, C=Composite, S=Steel ♦ CAUTION: Use dry air at 90psi (maximum): Do not lubricate turbine grinders. Lubrication will be detrimental to the operation and life of turbine tools. Do not attach a quick-disconnect fitting directly to the tool. General: Minimum Hose Size: 3/16” (4.8mm) All tools performance rated @ 90psi (620 kPa) air pressure. Standard Equipment: 10-90 Series: Applicable collet, collet wrenches, 7 ft. (2.1m) air supply hose, replaceable cartridge hose filter. 10-95 Series: Applicable collet, collet wrenches, 8 ft. (2.4m) air supply hose, built-in air filter, speed regulator

10-90

12R91 Series:Applicable collet, collet wrenches, collet guard, 5 ft. (1.5m) air supply hose 12-03, 10-04 & 12-04 Series: Applicable collet, collet wrenches, collet guard, 5 ft (1.5m) air supply hose, 1 ft. (0.3m) overhose 220G Series: Collet, Collet Nut Wrench, Collet Locking Pin 14G Series: Two collet wrenches, Nosepiece 18G Series: 1/4” collet - 7808, Nosepiece -1011790, 7/16” Spindle Wrench - 1011691, 11/16” Collet Nut Wrench - 1014472 Extra Equipment: Collets: See page 26 Collet Guard (10-90 series): See page 27 Cartridge hose filter: 45-0211 Overhose: See page 63

12-03

12R91

Inline Grinders

For Carbide Burrs, Mounted Points, Mounted Wheels

12,000 – 40,000 RPM 0.2 – 0.9 hp (0.15 – 0.67 kW) ■ Great for die and mold work,

deburring

10-10

■ Aluminum, composite or rugged

steel housings

■ Complete selection of rpm

12-05

speeds available

■ Front, side, and rear exhaust

models available

12-10

10-20

116glS

12-20

136glr

10-25

31g

12-25

Inline Grinders

For Carbide Burrs, Mounted Points, Mounted Wheels

Model Number Front Exhaust

Side Exhaust

Free Speed Rear Exhaust

Abrasives Capacity

rpm

Type Housing

Weight lbs. kgs

Length in.

Collet Size

Air Inlet Size

12-05 Series – 0.2 hp (0.15 kW) – with Collet Guard 12R0500-36

40,000

1/4” Carbide Burr, 7/8” Mtd. Wheel

0.7 0.3 5.9 150

1/4”

1/8”

1/2” Carbide Burr, 1” Mtd. Wheel 1/2” Carbide Burr, 1” Mtd. Wheel 1/2” Carbide Burr, 1” Mtd. Wheel 1/2” Carbide Burr, 1” Mtd. Wheel

C C C C

0.8 0.8 0.8 0.8

152 152 152 152

1/4” 1/4” 1/4” 1/4”

1/2” Carbide Burr, 1” Mtd. Wheel 1/2” Carbide Burr, 1” Mtd. Wheel 1/2” Carbide Burr, 1” Mtd. Wheel

A A A

0.7 0.3 4.6 117 0.7 0.3 4.6 117 0.7 0.3 4.6 117

1/4” 1/4” 1/4”

3/4” Carbide Burr, 1.5” Mtd. Wheel 3/4” Carbide Burr, 1.5” Mtd. Wheel 3/4” Carbide Burr, 1.5” Mtd. Wheel

C C C

1.4 0.6 6.9 175 1.4 0.6 6.9 175 1.4 0.6 6.9 175

1/4” 1/4” 1/4”

25,000

3/4” Carbide Burr, 1.5” Mtd. Wheel

1.3 0.6 5.8 147

1/4”

25,000 25,000

3/4” Carbide Burr 3/4” Carbide Burr

S S

1.8 0.8 6.3 160 1.8 0.8 6.3 160

1/4” 1/4”

25,000 25,000 24,000 18,000

1” Carbide Burr 1” Carbide Burr 1” Carbide Burr 1” Carbide Burr

S S S A

1.9 2.0 2.0 1.9

1/4” 1/4” 1/4” 1/4”

1.6 0.7 6.8** 173** 1/4”

1/4”

1” Carbide Burr, 1.5” Mtd. Wheel 1” Carbide Burr, 1.5” Mtd. Wheel 1” Carbide Burr, 1.5” Mtd. Wheel

C C C

1.8 0.8 7.3 185 1.8 0.8 7.3 185 1.8 0.8 7.4 188

1/4” 1/4” 1/4”

1” Carbide Burr, 1.5” Mtd. Wheel 1” Carbide Burr, 1.5” Mtd. Wheel 1” Carbide Burr, 1.5” Mtd. Wheel

A A A

1.4 0.6 6.3 159 1.4 0.6 6.3 159 1.4 0.6 6.3 159

1/4” 1/4” 1/4”

12-10 Series – 0.3 hp (0.22 kW) – 300 Series Collet 12L1001-36 12L1000-36 12L1003-36• 12S1008-36•

12L1081-36+ 12L1080-36▲+ 12L1082-36•+

34,000 30,000 25,000 20,000

0.4 0.4 0.4 0.4

6.0 6.0 6.0 6.0

10-10 Series – 0.3 hp (0.22 kW) – 300 Series Collet 10L1081-36 10L1080-36▲ 10L1082-36▲•

10L1001-36▲ 10L1000-36▲ 10L1003-36•

34,000 30,000 25,000

12-20 Series – 0.6 hp (0.45 kW) – 200 Series Collet 12L2000-01 12L2001-01• 12L2002-01•

12L2080- 01▲+ 12L2081-01• 12L2082-01•

25,000 20,000 18,000

10-20 Series – 0.6 hp (0.45 kW) – 200 Series Collet 10L2080-01

10L2000-01▲

116 Series – 0.6 hp (0.45 kW) – 200 Series Collet 116GLFB-250-C4 116GLSB-250-C4

136 Series – 0.6 hp (0.45 kW) – 200 Series Collet 136GLR-250-C4 136GLF-250-C4 136GLS-240-C4 136GLR-180-C4

0.9 0.9 0.9 0.9

7.4 6.8 6.8 7.4

188 173 173 188

31G Series – 0.6 hp (0.45 kW) – Universal Collet 31G-510

31GR-510

20,000* 3/4” Carbide Burr, 1.5” Mtd. Wheel

12-25 Series – 0.9 hp (0.67 kW) – 200 Series Collet 12L2500-01 12L2502-01• 12L2562-01•

12L2580-01+ 12L2582-01•+ 12L2542-01•

23,000 18,000 12,000*

10-25 Series – 0.9 hp (0.67 kW) – 200 Series Collet 10L2500-01 10B2500-01 10L2502-01•

10L2580-01

23,000 23,000 18,000

Housing Guide: A=Aluminum, C=Composite, S=Steel ▲ Button throttle available • Oilless blades + Overhose model available but not necessarily as Rapid Select *Governor controlled speed. If front exhaust, add 0.7” (18mm) to length **For 31G series rear exhaust model, add 0.6” (18mm) ‡Mounted wheel capacity depends on wheel diameter, thickness and overhang. Consult wheel manufacturer for speed recommendations. General: All tools performance rated @ 90psi (620 kPa) air pressure. Minimum Hose I.D.– 12-05 Series: 3/16” (4.8mm) 10-10, 12-10, 116 Series: 1/4” (6.4mm)

10-20, 10-25, 12-20, 12-25, 136, 31G Series: 5/16” (7.9mm) Standard Equipment: 12-05 Series: Applicable collet, collet wrenches, collet guard, 7 ft (2.1m) air supply hose 12-10, 12-20, 12-25, 10-10, 10-20, 10-25, 116, 136, 31G Series: Applicable collet, collet wrenches Extra Equipment: See pages 24–27 Overhose (rear exhaust): See page 63

12-05

12-20

Inline Extended Grinders

For Carbide Burrs, Mounted Points, Mounted Wheels

18,000 – 28,000 RPM 0.3 – 1.2 hp (0.22 – 0.9 kW) ■ Extended housings ■ Aluminum, composite or rugged

steel housings

12-11

10-11

12-26

136g

12-26

15g

Inline Extended Grinders

For Carbide Burrs, Mounted Points, Mounted Wheels

Model Number Front Exhaust

Side Exhaust

Free Speed Rear Exhaust

Abrasives Capacity

Type Housing

rpm

Weight lbs. kgs

Collet Air Size Inlet Size mm

Length in.

12-11 Series - 0.3 hp (0.22 kW) - 5” (127mm) Extension - 300 Series Collet 12L1101-36 12L1112-36•

12L1181-36

28,000 25,000

1/2” Carbide Burr, 1” Mtd. Wheel 1/2” Carbide Burr, 1” Mtd. Wheel

C C

1.3 0.6 10.9 277 1.3 0.6 10.9 277

1/4” 1/4”

10-11 Series - 0.3 hp (0.22 kW) - 5” (127mm) Extension - 300 Series Collet 10L1101-36 10L1112-36▲

10L1181-36

28,000 25,000

1/2” Carbide Burr, 1” Mtd. Wheel 1/2” Carbide Burr, 1” Mtd. Wheel

A A

1.2 0.5 1.2 0.5

9.8 9.8

248 248

1/4” 1/4”

24,000

1” Carbide Burr, 2” Mtd. Wheel

3.5 1.6 12.4 315

1/4”

C C

2.9 1.3 12.9 328 2.9 1.3 12.9 328

1/4” 1/4”

4.2 1.9 23.5 597

1/4”

15GELC-180-C4 18,000* 1.25” Carbide Burr, 2” Mtd. Wheel S 4.3 2.0 14.5 368 1/4” Extra Equipment: Housing Guide: A=Aluminum, C=Composite, S=Steel See pages 24–27 ▲ Button throttle available Overhose (rear exhaust): See page 63 *Governor controlled speeds • Oilless blades Multiple Extensions for 12-26 Series: ‡Mounted wheel capacity depends on wheel diameter, thickness and Each extension changes the tool length and weight by: overhang. Consult wheel manufacturer for speed recommendations. 12-26 series = 7.25” (184mm) and 1.2 lbs. (0.54 kg); The length and weight in the table are for 2A models General: 1A = One extension All tools performance rated @ 90psi (620 kPa) air pressure. 2A = Two extension Minimum Hose I.D.– 3A = Three extensions, etc. 10-11, 12-11 Series: 1/4” (4.8mm) All multiple extensions are not available in all speeds 12-26, 136 Series: 5/16” (7.9mm) 15 (governed) Series: 3/8” (9.5mm) Standard Equipment: Applicable collet, collet wrenches

3/8”

136 Series – 0.8 hp (0.6 kW) – 200 Series Collet 136GEL-240-C4

12-26 Series - 0.9 hp (0.67 kW) - 5” (127mm) Extension - 200 Series Collet 12L2600-01 12L2682-01•

22,000 18,000

1” Carbide Burr, 1.5” Mtd. Wheel 1” Carbide Burr, 1.5” Mtd. Wheel

12-26 Series – 0.9 hp (0.67 kW) – Multiple Extension - 300 Series Collet 12S2674-2A•

18,000 3/4” Carbide Burr, 1.5” Mtd. Wheel

15 Series – 1.2 hp (0.9 kW) – 200 Series Collet – Governed

12-11

Right Angle Grinders

For Carbide Burrs, Mounted Points, Mounted Wheels

6,000 – 30,000 RPM 0.3 – 0.9 hp (0.22 – 0.67 kW) 12-23

■ Suitable for a wide range

of finishing and deburring applications

12-12

■ Geared or gearless ■ Front, side, or rear exhaust ■ Heavy duty heads available for

more rugged applications

■ Extended head models available 12-13

12-27

12-22

12-22 Heavy Duty Head

116GL Extended Head

12-27 Heavy Duty Head

136glr Heavy Duty Head

Right Angle Grinders

For Carbide Burrs, Mounted Points, Mounted Wheels

Free Speed

Model Number Front Exhaust

Side Exhaust Rear Exhaust

Head Height*

Length

lbs. kgs

in.

Air Collet Inlet Size Size mm

C C C C

1.1 1.1 1.0 1.0

0.5 0.5 0.5 0.5

2.7 2.7 2.9 2.9

69 69 74 74

6.3 6.3 5.0 5.0

160 160 127 127

C C C

1.1 1.1 1.1

0.5 3.7 0.5 3.7 0.5 3.7

94 94 94

7.1 180 1/4” 1/4” 7.1 180 1/4” 1/4” 7.1 180 1/4” 1/4”

2.0 0.91 5.5 140 7.5 190 1/4” 1/4”

3.2

1.5 3.9

9.3 236 1/4” 1/4”

1.7

0.8 2.7

7.5 191 1/4” 1/4”

3.3

1.5

7.1 180 1/4” 1/4”

2.6

1.2

9.1 231 1/4” 1/4”

3.4

1.5

8.3 211 1/4” 1/4”

3.4

1.5 3.9

9.8 249 1/4” 1/4”

1.9

0.9 2.9

8.0 203 1/4” 1/4”

Type Housing

Abrasives Capacity‡

rpm

Weight

12-12 & 10-12 Series – 0.3 hp (0.22 kW) – 300 Series Collet 12L1201-36 12L1200-36 10L1201-36 10L1200-36

12L1281-36 12L1280-36 10L1281-36 10L1280-36

20,000 12,000 20,000 12,000

1/2” Carbide Burr, 1” Mtd. Whl. 1/2” Carbide Burr, 1” Mtd. Whl. 1/2” Carbide Burr, 1” Mtd. Whl. 1/2” Carbide Burr, 1” Mtd. Whl.

1/4” 1/4” 1/4” 1/4”

12-13 Series – 0.3 hp (0.22 kW) – Gearless – 300 Series Collet 12L1380-36 12L1381-36 12L1382-36•

30,000 1/2” Carbide Burr, 1” Mtd. Whl. 25,000 1/2” Carbide Burr, 1” Mtd. Whl. 20,000 1/2” Carbide Burr, 1” Mtd. Whl.

12-23 Series – 0.5 hp (0.38 kW) – Gearless – 200 Series Collet 12L2384-01

20,000 3/4” Carbide Burr, 1.25” Mtd. Whl.

12-22 Series – 0.6 hp (0.45 kW) – 200 Series Collet – Heavy Duty Head 12L2252-01•

11,000 3/4” Carbide Burr, 2” Mtd. Whl.

12-22 Series – 0.6 hp (0.45 kW) – 300 Series Collet 12L2218-36

18,000 1/2” Carbide Burr, 1” Mtd. Whl.

116 Series – 0.6 hp (0.4 kW) – 200 Series Collet – Heavy Duty Head 116GLF-115A-C4

11,500 1” Carbide Burr

116 Series – 0.6 hp (0.4 kW) – 200 Series Collet – Extended Head 116GLFC-165A-C4

16,500 3/4” Carbide Burr

136 Series – 0.8 hp (0.6 kW) – 200 Series Collet – Heavy Duty Head 136GLR-115A-C4

11,500 1” Carbide Burr

12-27 Series – 0.9 hp (0.67 kW) – 200 Series Collet – Heavy Duty Head 12L2752-01

11,000 1” Carbide Burr, 2” Mtd. Whl.

12-27 Series – 0.9 hp (0.67 kW) – 300 Series Collet 12L2718-36

18,000 3/4” Carbide Burr, 1.25” Mtd. Whl.

Housing Guide: A=Aluminum, C=Composite, S=Steel * Over spindle • Oilless blades ‡Mounted wheel capacity depends on wheel diameter, thickness and overhang. Consult wheel manufacturer for speed recommendations. General: All tools performance rated @ 90psi (620 kPa) air pressure. Minimum Hose I.D.– 12-12, 10-12, 12-13, 12-23, 116 Series: 1/4” (4.8mm) 12-22, 12-27, 136 Series: 5/16” (7.9mm)

12-12

Standard Equipment: Applicable collet, collet wrenches Extra Equipment: See pages 24–27 Overhose (rear exhaust): See page 63.

12-22

Inline Grinders For Cone or Plug Wheels

9,000 – 24,000 RPM 0.8 – 2.1 hp (0.6 – 1.6 kW)

136GEL

■ Governed and non-governed

15gelc

models

■ Side exhaust 590BHL

■ Extended Series ■ Rugged steel housings

Model Number Rear Exhaust

Rotatable Side Exhaust

Free Speed

Abrasives Capacity

rpm

Type Housing

Weight

Length in.

Spindle Size

Air Inlet Size

lbs.

kgs

3.5

1.6

12.3 312

3/8”-24

1/4”

S S S

4.3 4.5 4.3

2.0 2.0 2.0

14.5 368 14.9 378 14.5 368

3/8”-24 5/8”-11 3/8”-24

1/4” 1/4” 1/4”

S S

7.6 7.6

3.4 3.4

17.9 455 17.9 455

5/8”-11 5/8”-11

1/4” 1/4”

136 Series Extended – 0.8 hp (0.6 kW) – Non-Governed – Rear Exhaust 136GEL-240-P3T

24,000

1.25" Cone or Plug Wheel

15 Extended Series – 1.2 hp (0.9 kW) – Governed – Rotatable Exhaust Deflector 15GELC-180-P3T 15GELC-180-P5T 15GELC-140-P3T

18,000* 2” Cone or Plug Wheel 18,000* 2” Cone or Plug Wheel 14,000* 2” Cone or Plug Wheel

500B Horizontal Series – 2.1 hp (1.6 kW) – Governed – Rotatable Exhaust Deflector 590BHL-P 5120BHL-P

9,000* 3” Cone or Plug Wheel 12,000* 3” Cone or Plug Wheel

Housing Guide: A=Aluminum, C=Composite, S=Steel *Governor controlled speeds General: All tools performance rated @ 90psi (620 kPa) air pressure. Minimum Hose I.D.– 136, 15, 500B Series: 5/16” (7.9mm)

Standard Equipment: Applicable wrenches, operating instructions & service manual Extra Equipment: See pages 28–31 Overhose (rear exhaust): See page 63.

Inline Grinders For Type 1 Wheels

6,000 – 18,000 RPM 0.5 – 4.1 hp (0.4 – 3.1 kW)

136glr

■ Short & extended ■ Side & rear exhaust ■ Safety lever or spade handle 560bhl

1760hl

1960hg

Model Number Rear Exhaust

Free Speed

Abrasives Capacity

rpm

Rotatable Side Exhaust

Type Housing

lbs.

kgs

in.

Arbor/ Spindle Size mm

1.1 1.1

7.3 7.3

185 3/8”-24 185 3/8”-24

Weight

Length

Air Inlet Size

1/4” 1/4”

136 Series – 0.5 hp (0.4 kW) – Rear Exhaust 136GLR-180-W3T4 136GLR-150-W3T4

18,000 3” x 1/2” (4” wheel guard) 15,000 3” x 1/2” (4” wheel guard)

S S

2.4 2.4

6,000 6” x 1” (6” wheel guard)

10.8 4.9 18.4 467

5/8”

1/2”

11.6 5.3 18.8 478

5/8”

1/2”

6,000* 6” x 1” (6” wheel guard)

14.5 6.6 19.6 498

5/8”

1/2”

6,000* 6” x 1” (6” wheel guard)

6.8

5/8”

1/2”

500B Series – 1.9 hp (1.4kW) – Rotatable Exhaust 560BHL-16

500B Series – 1.9 hp (1.4kW) – Rotatable Exhaust – Spade Handle 560BHX-16

6,000 6” x 1” (6” wheel guard)

1700 Series – 3.1 hp (2.3kW) – Lock-off Lever Throttle 1760HL-16

1900 Series – 4.1 hp (3.1 kW) – Spade Handle 1960HG-16

Housing Guide: A=Aluminum, C=Composite, S=Steel * Governor controlled speeds General: All tools performance rated @ 90psi (620 kPa) air pressure. Minimum Hose I.D.– 560, 1700, 1900 Series: 1/2” (12.7mm)

7.6 21.4 544

Standard Equipment: 136, 500B, 1700 & 1900 series: Wheel guard and flange wrench Extra Equipment: See pages 24–27 Wheel Guards: See page 27 Overhose (rear exhaust): See page 63

Inline & Right Angle Grinders For Type 1 Cut-Off Wheels

116GLF Heavy Duty Head

12,000 – 18,000 RPM 0.5 – 1.1 hp (0.4 – 0.8 kW) ■ Composite and steel housing ■ Front, Side & Rear Exhaust

136GLF Heavy Duty Head

12-27 Heavy Duty Head

116GLFB Extended Head 15gl

136GLFB Extended Head

Free Speed

Model Number Front Exhaust

Side Exhaust

Rear Exhaust

rpm

Type 1 Cut-Off Wheel Capacity

Type Housing

Weight lbs.

kgs

Length in.

Head Height in.

Arbor/ Spindle mm Size

Air Inlet Size

116 Series – 0.6 hp (0.4kW) – Heavy Duty Head 116GLF-115A-W3T4

11,500 4”x 1/8” (4” wheel guard)

3.6 1.6 7.1 180 3.2 81

1/4”

13,500 4”x 1/8” (4” wheel guard)

3.0 1.4 9.1 231 2.2 56

1/4”

11,500 4”x 1/8” (4” wheel guard) 11,500 4”x 1/8” (4” wheel guard)

S S

3.8 1.7 8.3 211 3.2 81 3.8 1.7 8.3 211 3.2 81

3/8” 3/8”

13,500 4”x 1/8” (4” wheel guard) 13,500 4”x 1/8” (4” wheel guard)

S S

3.3 1.5 9.6 244 2.2 56 3.3 1.5 9.6 244 2.2 56

3/8” 3/8”

18,000 4”x 1/8” (4” wheel guard)

3.2 1.5 8.0 203

6,000** 7”x1/8” (7” wheel guard)

7.1 3.2 10.0 254 4.0 102

116 Series – 0.5 hp (0.4kW) – Extended Head 116GLFB-135A-W3T4

136 Series – 0.8 hp (0.6kW) – Heavy Duty Head 136GLS-115A-W3T4 136GLR-115A-W3T4

136 Series – 0.7 hp (0.5kW) – Extended Head 136GLFB-135A-W3T4 136GLSB-135A-W3T4

12-27 Series – 0.9 hp (0.67 kW) 12L2718-28

3/8”

1/4”

15 Series – 1.1 hp (0.8 kW) 15GL-60A-W5T7 Housing Guide: A=Aluminum, C=Composite, S=Steel **Governor controlled speeds General: All tools performance rated @ 90psi (620 kPa) air pressure. Minimum Hose I.D.– 116 Series: 1/4” (6.4mm) 12-27, 136 Series: 5/16” (7.9mm) 15 Series: 3/8” (9.5mm)

3/8”

Standard Equipment: 12-27 Series: Wheel guard, spindle wrench, inner and outer wheel flanges 116, 136 Series: Wheel guard, wheel adapter, spindle wrench 15 Series: Wheel guard Operating instructions & service manual Extra Equipment: Wheel Guards: See page 27 Overhose (rear exhaust): See page 63

Right Angle Grinders

For Type 27 Depressed Center Wheels

6,000 – 14,500 RPM 0.6 – 1.1 hp (0.4 – 0.8 kW) ■ Front, side, & rear exhaust models ■ Governed or non-governed models

116glsb Extended Head

31ar

15gl

136glf Heavy Duty Head

Free Speed

Model Number Front Exhaust

Side Exhaust

Rear Exhaust

rpm

Type 1 Cut-Off Wheel Capacity

Type Housing

Weight

Length

lbs. kgs in. mm

Head Height in.

Arbor/ Spindle mm Size

Air Inlet Size

31A Series – 0.6 hp (0.45 kW) 31AR-530

13,500 4” (4” wheel guard)

2.3 1.0 10.8 274

3/8"

1/4”

11,500* 4” (4” wheel guard) 11,500* 4.5” (4.5” wheel guard)

S S

3.6 1.6 7.1 180 3.2 81 3/8”-24 3.6 1.6 7.1 180 3.2 81 3/8”-24

1/4” 1/4”

13,500* 4” (4” wheel guard)

3.0 1.4 9.1 231 3.2 81 3/8”-24

1/4”

S S S

3.9 1.8 7.6 193 3.2 81 3/8”-24 3.8 1.7 8.3 211 3.2 81 3/8”-24 3.9 1.8 7.6 193 3.2 81 3/8”-24

1/4” 1/4” 1/4”

13,500* 4” (4” wheel guard)

3.3 1.5 9.6 244 3.2 81 3/8”-24

1/4”

11,000 4” (4” wheel guard)

3.8 1.7 8.7 223 3.5 89

3/8”

1/4”

6,000* 7” (7” wheel guard)

7.1 3.2 10.0 254 4.0 102

5/8”

1/4”

116 Series – 0.6 hp (0.4 kW) – Heavy Duty Head 116GLF-115A-D3T4 116GLF-115A-D3T45

116 Series – 0.6 hp (0.4 kW) – Extended Head 116GLSB-135A-D3T4

136 Series – 0.8 hp (0.6 kW) – Heavy Duty Head 136GLF-115A-D3T4

11,500* 4” (4” wheel guard) 136GLR-115A-D3T45 11,500* 4.5” (4.5” wheel guard) 136GLS-115A-D3T4 11,500* 4” (4” wheel guard)

136 Series – 0.8 hp (0.6 kW) – Extended Head 136GLSB-135A-D3T4

10-27 Series – 0.9 hp (0.67 kW) 10K2752-84

15 Series – 1.1 hp (0.8 kW) – Governed 15GL-60A-D5T7 Housing Guide: A=Aluminum, C=Composite, S=Steel *Governor controlled speeds **Over spindle +Overhose model available General: All tools performance rated @ 90psi (620 kPa) air pressure. Minimum Hose I.D.– 136 Series: 1/4” (6.4mm) 10-27, 31, 136 Series: 5/16” (7.9mm) 15 Series: 3/8” (9.5mm)

Standard Equipment: 10-27 Series: Wheel guard, spindle wrench 116, 136 Series: Wheel guard, wheel adapter, spindle wrench 15 Series: Wheel guard, flange wrench Operating instructions & service manual Extra Equipment: See pages 24–27 Wheel Guards: See page 27 Overhose (rear exhaust): See page 63

Vertical Grinders

For Type 27 Depressed Center Wheel & Cup Wheel

6,000 – 18,000 RPM 0.4 – 4.1 hp (0.3 – 3.1 kW) ■ Robust sand-cast housing ■ For heavy material removal &

rough grinding operations

136vgl

■ Safety lever throttle 15vsB

1260dvl

1760bvl

1960bvl

Vertical Grinders

For Type 27 Depressed Center Wheel & Cup Wheel

Model Number

Free Speed

Abrasive Capacity

rpm

Max. Power hp

0.6 0.4 0.4

0.4 0.3 0.3

1.0

Exhaust

Weight

Height**

Length

Spindle Size

Air Inlet Size

lbs.

kgs

in.

Front Front Front

2.4 2.4 2.4

1.1 1.1 1.1

4.0 4.0 4.0

102 102 102

7.3 7.3 7.3

185 185 185

3/8”-24 3/8”-24 3/8”-24

1/2” 1/2” 1/2”

0.7

Front

5.4

2.4

6.6

168

5/8”-11

3/8”

2.0

1.5

Side

7.5

3.4

7.5

191

5/8”-11

1/2”

3.0 3.0

2.2 2.2

Side Side

9.1 9.1

4.1 4.1

7.0 7.0

178 178

5/8”-11 5/8”-11

1/2” 1/2”

4.1

3.1

Side

12.8

5.8

8.3

211

5/8”-11

1/2”

136 Series – Lock-off Lever Throttle – Gearless 136VGL-180-D3T3 136VGL-135-D3T4 136VGL-115-D3T4

18,000 13,500 11,500

3” (3” wheel guard) 4” (4” wheel guard) 4” (4” wheel guard)

15 Vertical Series – Self Closing Thumb Throttle – Geared 15VSB-60

6,000

7” (7” wheel guard)

1200 Series – Lock-off Lever Throttle 1260DVL-07

6,000*

7” (7” wheel guard)

1700 Series – Lock-off Lever Throttle – Governed 1760BVL-07 1760BVL-09

6,000* 6,000*

7” (7” wheel guard) 9” (9” wheel guard)

1900 Series – Lock-off Lever Throttle – Governed 1960BVL-09

6,000*

9” (9” wheel guard)

*Governor controlled speeds **Over spindle General: All tools performance rated @ 90psi (620 kPa) air pressure. Minimum Hose I.D.– 136 Series: 3/4” (19mm) 15 Series: 3/8” (9.5mm) 1200 Series: 1/2” (12.7mm) 1700, 1900 Series: 3/4” (19mm))

Standard Equipment: 136, 15 Series: Wheel guard, flange wrench 1200, 1700, 1900: Wheel guard, spindle wrench Operating instructions & service manual Extra Equipment: See pages 24–27 Wheel Guards: See page 27 Wheel adapter kit: See page 25

Grinder Accessories Precision Carbide Burs for Die Grinders Size

Code No. 1/4” Shank

Max. Speed

Cylindrical Radius End 1/16” x 3/4” 3/8” x 3/4” 1/2” x 1” 5/8” x 1”

889035 889036 889038 889039

80,000 66,000 50,000 40,000

889003 889005 889006 889009

133,000 80,000 66,000 40,000

Cylindrical Plain 3/16” x 5/8” 5/16” x 3/4” 3/8” x 3/4” 5/8” x 1”

Cleco Wheel Guards Tool Series

Size

Part No.

Speed (rpm)

3” 4” 4” 3” 4” 7” 3” 4” 4” 6” 6” 8”

202226 889208 202227 202278 202245 204131 865786 865988 881608 865993 202022 202025

13,500 & 16,500 11,500 13,500 & 16,500

7” 3” 4” 4” 4 1/2” 3” 4” 5” 7” 7” 9” 9” 7”

865986 849905 203382 889208 202063 202226 202227 203142 849760 202374 202608 867741 867740

7” 7” 7” 7” 9”

849760 202374 867740 865986 869067

4” 5” 6”

202465 861892 861893

Type 1 Wheel 116RA, 136RA 116RA, 136RA 116RA, 136RA 136, 15 136, 15 15RA 15H 15H 500BH 500BH 1700V, 1900V 1700V, 1900V

9,000 & 12,000 6,000

Type 27 Wheel Oval 1/4” x 3/8” 3/8” x 5/8”

889056 889057

100,000 66,000

Cone Round End 14° 1/4” x 5/8” 5/16” x 7/8” 3/8” x 11/16” 1/2” x 11/8” 3/4” x 11/2”

889135 889101 889102 889103 889106

100,000 66,000 50,000 40,000 33,000

889108 889132

100,000 66,000

889046 889048 889051

100,000 66,000 40,000

889128

100,000

Ball 1/4” 3/8” 3/8”

11,500 11,500 13,500 & 16,500 13,500 & 16,500 11,500

Type 28 Wheel

Cone or Taper 1/4” x 3/4” 3/8” x 5/8”

15RA 136V 136V 116RA, 136RA 116RA, 136RA 116RA, 136RA 116RA, 136RA 116RA, 136RA 15V 1200V 1200V 1700V, 1900V 1700V, 1900V 15V 1200V 1700V, 1900V 15RA 1700V, 1900V

Type 6 & 11 (Cup) Wheel 1200V 1700V, 1900V 1700V, 1900V

Tree Pointed 1/4” x 3/4”

Buckeye Wheel Guards Tool Series

Tree Radius End 1/4” x 3/4” 1/2” x 1” 3/4” x 1” 3/4” x 11/2”

889128 889067 889069 889071

100,000 50,000 33,000 33,000

Size

Guard Number

Type 1 (Cut-Off) Wheel 31A

4”

1025947

Type 27 Depressed Center Wheel 31A 31A 31A

4” 1022312 4” Thin 1024745 4 1/2” 1024788

Grinder Accessories Spiral Cool Sanding Kits

Overhose for 136* Grinders Part Number

861654

Part No.

861792 861655 861656*

869580 869204 202343

861655

Size

Description

Exhaust Overhose Overhose Adapter Hose Clamp

869204

* Rear exhaust models only

Used On

5” 7” 9”

116RA, 136RA 15RA, 15V, 1200V, 1700V, 1900V 1700V, 1900V

202343 869580

* For use on 4,500 and 6,000 rpm models only

4 1/2” Wheel Guard Kit

Exhaust Hose

Part Number

Used On

14-2188

116RA, 136RA

Part Number

Description

1018422

Overhose (5’)

Use with any Buckeye 31 series straight housing tool Secures over the exhaust bushing at the rear of the tool to carry exhaust debris away from the work area.

Type 27 & 28 Wheel Adapter Kit* Part Number

Used On

849269

15v, 1200v, 1700v, 1900v

849269

Router Attachment Part Number

Used On

861804

116, 136 861804

Grinder Accessories Part Number

Collet Size

Tool Termination

1/16” 3/32” 3/32” 1/8” 1/8” 1mm 2.35mm 3mm 3mm

-04 or -14 -06 or -16 -16 -08 or -18 -18 -00 or -10 -02 or -12 -03 or -13 -13

Capacity Min. Max.

10-04

10-90

OPT STD

OPT OPT

Tool Series* 12-03

12-04

Series HG Collets 103 102 01-0102 100 01-0100 146 131 148 01-0148

– – – – – – – – –

1/16” 3/32” 3/32” 1/8” 1/8” 1mm 2.35mm 3mm 3mm

STD

Collet Size

Tool Termination

Min.

Max.

1/8” 3/16” 1/4” 3mm 6mm

-4508 -4512 -45 -45M3 -45M6

– – – – –

1/8” 3/16” 1/4” 3mm 6mm

1/8” 3/16” 1/4” 5/16” 3/8” 7/16” 1/2” 8mm 10mm

-6208 -6212 -6216 -6220 -62 -6228 -6232 -62M8 -6270

3/32” 5/32” 7/32” 9/32” 11/32” 13/32” 15/32” – –

1/8” 3/16” 1/4” 5/16” 3/8” 7/16” 1/2” 8mm 10mm

1/8” 5/32” 3/16” 7/32” 1/4” 9/32” 5/16” 11/32” 3/8” 6mm 8mm

-0108 -0110 -0112 -0114 -01 -0118 -0120 -0122 -0124 -01M6 -01M8

3/32” 1/8” 5/32” 3/16” 7/32” 1/4” 9/32” 5/16” 11/32” 5.2mm 7.2mm

1/8” 5/32” 3/16” 7/32” 1/4” 9/32” 5/16” 11/32” 3/8” 6mm 8mm

3/64” 5/64” 3/32” 1/8” 5/32” 3/16” 1/4” 3mm 6mm

-3603 -3605 -3606 -3608 -3610 -3612 -36 -36M3 -36M6

1/64” 3/64” 1/16” 3/32” 1/8” 5/32” 7/32” 2.2mm 5.2mm

3/64” 5/64” 3/32” 1/8” 5/32” 3/16” 1/4” 3mm 6mm

STD STD

OPT OPT STD

STD STD

Capacity Part Number

STD STD

Tool Series*

10-95

12-10 12-11 12-12

12-20 12-25

12-21 12-22 12-26 12-27 12-31

10-43 11-43

12-05 12-22 12-27

Universal Collets 7809 7812 7808 7810 7811

OPT OPT STD OPT OPT

“K” Series Collets 120 121 122 123 124 125 126 134 135

OPT OPT OPT OPT STD OPT OPT OPT OPT

Series 200 Collets 204 205 206 207 208 209 210 211 212 213 216

OPT OPT OPT OPT STD OPT OPT OPT OPT OPT OPT

Series 300 Collets 301 302 303 304 305 306 308 311 310 * Std = Standard Collet OPT = Optional Collet

STD

OPT

OPT OPT OPT OPT OPT OPT STD OPT OPT

Grinder Accessories Long Collet Guard

Model Number

Wheel Size

Tool Series*

Completely covers the collet. Limits the diameter of the cutting tool used to 5/8”.

Guard No.

Stationary Cup Wheel Guards 10-53 & 10-58

Part Number

Tool Series

1020

12-10

Noise Suppressor Guard Completely covers the collet. Limits the diameter of the cutting tool used to 1/2”. Air is exhausted at an angle.

6” (152mm)

14-5002

Type 1 (Cut-Off) Wheel Guards 12-10 3” x 3/16” (76mm x 4.8mm) 12-12 3” x 3/16” (76mm x 4.8mm) 12-20 & 12-25 3” x 3/16” (76mm x 4.8mm) 12-22 & 12-27 (LP) 3” x 3/16” (76mm x 4.8mm) 12-25 4” x 3/16” (102mm x 4.8mm) 12-22 & 12-27 (LP) 4” x 3/16” (102mm x 4.8mm)

14-1018 14-1258 14-2624 14-1258 14-2623 14-1259

14-2623

Type 1 Wheel Guards

Part Number

Tool Series

14-2188

12-10 tront exhaust tools only

Turbine Collet Guard Slips on and off tool with a slight twist.

12-25 12-26 12-31 12-41 12-41 12-51 10-56

3” x 1/2” (76mm x 13mm) 3” x 1/2” (76mm x 13mm) 3” x 1/2” (76mm x 13mm) 3” x 1” (76mm x 25mm) 4” x 1” (102mm x 25mm) 6” x 1” (152mm x 25mm) 8” x 1” (203mm x 25mm)

14-2551 14-2097 14-3011 14-3011 14-4074 14-5012 14-5022

14-1259

Type 27 Depressed Center Wheel Guards

Part Number

Tool Series

14-1280

10-9000

14-5008

Depressed Center Wheel Adapters Adapt abrasive with a 7/8” arbor tool with 5/8-11 thread. Part Number

Description

14-5008

Metal Flange

12-22 & 12-27 (LP) 12-28 (NG) 12-22 & 12-27 12-22 & 12-27 (LP) 12-27 12-27 12-22 & 12-27 12-42 10-53 & 10-58 10-53 & 10-58

3” (76mm) 3” (76mm) 4” (102mm) 4” (102mm) 4.5” (115mm) 5” (127mm) 5” (127mm) 7” (178mm) 7” (178mm) 9” (229mm)

14-2593 14-2564 14-2562 14-2594 14-2672 14-2252 14-2152 14-2123 14-5018 14-5017

14-2594

Type 28 Depressed Center Wheel Guards 10-53 & 10-58 10-53 & 10-58 * Std = Standard Collet LP = Low Profile NG = Non-Governed

7” (178mm) 9” (229mm)

14-5018 14-5019

14-5018

Toolpost Holders Special high-speed machining operations can be made with this lathe mounted cross-slide attachment. Swivel holder permits positioning the grinder thru 180° arc.

Part Number

Tool Series

14-0991

10-04

Sanders, Buffers & Polishers Introduction

Dotco sanders, buffers and polishers are available in a variety of styles and power ratings to provide flexibility in choosing the best tool for the job. Disc sanding and polishing, wire brushes, buffing wheels, abrasive sheets, woven or non-woven belts. No matter the application, Dotco has a quality tool solution. ®

Motor ratings for sanders range from 0.6 – 1.6HP. All sanders feature composite, aluminum or steel housings to protect the internal parts as much as possible.

Dotco 12-18 Series random orbital & orbital sanders The Dotco 12-18 Series random orbital and orbital sanders have a low profile design for better sanding control which improves finish quality. They are lightweight with low vibration to reduce operator fatique and improve production levels. You can choose between models with either 3/16” (black lever) or 3/32” (chrome lever) random orbital pattern to best fit your application. All models are shipped with 3 interchangeable grips to comfortably fit any hand in your plant. Vacuum models are extremely efficient and are equipped with super vac for increased efficiency.

Dotco 12-23 Series belt sanders The Dotco 12-23 Series belt sanders can grind corners, enter grooves, debur, strap polish or enter channels. The unique belt cover makes belt changes quick and easy. You can use non-woven nylon or coated abrasive belts on a variety of surfaces.

Enter Channels Strap Polish

The unique sanding attachment pivots 360 degrees to allow user flexibility in reaching confined areas. The belt cover snaps on/off easily with no special tools needed allowing for quick belt changes. The arm itself is interchangeable to best suit a variety of applications.

Orbital Sanders Page 31

Right Angle Sanders Page 32

Random Orbital Sanders Page 30

Durable high carbon steel lever won’t break off Sintered bronze one piece muffler does an excellent job of muffling noise and does not clog as easily as competitive models. When needed, makes servicing tool easy. 3 interchangeable grips to reduce fatique and increase user comfort shipped standard with every sander Hardened alloy steel cylinder for power, speed and longer cylinder life

Floating rotor design reduces internal friction for a higher power transfer, simplified maintenance and longer tool life

Hardened alloy steel shaft balancer for durability and long wear Underside variable speed control allows user to easily adjust speed for different applications

A wide range of industrial-quality PSA and hook and loop pads available in 3”, 5” and 6” sizes

Belt Sanders Page 34

Buffers/Polishers Page 36

Sanders

Random Orbital & Orbital

12-18 Series Random Orbital Nominal Motor Power . 0.24 hp 0.18 kW ■ Low profile for more sanding control ■ Lightest weight to reduce operator fatique ■ Extremely efficient built-in vacuum system with swivel hose fittings ■ 3/16” & 3/32” random orbital pattern

3/16”

3/32”

■ Levers allow users to visually see the difference between 3/16” and 3/32” ■ 3 interchangeable grips to fit all hand sizes

12L1820-03

12L1820-15

12L1820-05

12-18 Series Orbital

Nominal Motor Power . 0.24 hp 0.18 kW

12L1850-09

■ Lightest weight full size orbital sander in the world ■ Full 10,000 OPM with more power and faster cutting than any equivalent machine ■ Patent pending pad suspension system that produces unmatched performance ■ 3 interchangeable grips to fit all hand sizes ■ 3/16” orbital pattern 12L1850-17

Sanders

Random Orbital & Orbital

Model Number 3/16” Orbit

Sanding Pad Size

3/32” Orbit

Weight

Free Speed

Height

Length

rpm

lbs.

kgs.

in.

12,000 12,000 12,000

1.56 1.62 1.68

0.71 0.73 0.76

3.33 3.33 3.33

84.58 84.58 84.58

5.11 5.48 5.48

129.79 139.19 139.19

3.33 3.33 3.33

84.58 84.58 84.58

6.98 7.75 7.75

177.29 196.85 196.85

84.58 84.58

8.33 8.84

211.58 224.54

12-18 Series – Random Orbital Sander – Non Vacuum 12L1820-03 12L1820-05+ 12L1820-06+

3.5” 5.0” 6.0”

12L1823-05+ 12L1823-06

12-18 Series – Random Orbital Sander – Central Vacuum, Vacuum Attachment & Shroud 12L1820-13 12L1820-15+ 12L1820-16+

3.5” 5.0” 6.0”

12L1823-15

12,000 12,000 12,000

1.60 1.73 1.90

0.73 0.78 0.86

12-18 Series – Random Orbital Sander – Self-Generated Unit with Vacuum Hose & Floor Bag 12L1820-25+ 12L1820-26+

5.0” 6.0”

General: Air Inlet: 1/4” NPT - Use 1/4” (6.4mm) I.D. Hose All tools performance rated @90 psi (620 kPa) air pressure Air Flow: 16 SCFM (453 LPM) Power: 0.24 hp (179 W)

12,000 12,000

1.73 1.80

0.78 0.82

3.33 3.33

Optional Equipment: See page 38 for back-up pads. Additional Models: + Add “HL” to end of model number to designate hook and loop pad.

Standard Equipment: Operating instructions & parts manual. Random Orbital Models – 3/8” low profile medium density premium urethane back-up pad; Interchangeable grips (3)

12L1823-05

12L1820-25

12L1820-16

Clip

Model Number PSA

Speed Abrasive Size orbits/minute

Hook & Loop

Weight lbs. kg

Height In. mm

in.

Length mm

Width in. mm

12-18 Series – 3/16” Orbital Sander – Non-Vacuum 12L1850-09 12L1850-07

12L1850-07HL

3.66” x 9” 3.66” x 7”

10,000 10,000

2.28 2.20

1.03 1.00

3.94 3.94

100.01 100.01

6.88 6.88

174.63 174.63

3.53 89.69 3.53 89.69

10,000

2.20

1.00

3.94

100.01

8.78

223.04

3.53 89.69

100.01 10.00 254.00

3.53 89.69

12-18 Series – 3/16” Orbital Sander – Central Vacuum 12L1850-19

12L1850-17

3.66” x 7”

12-18 Series – 3/16” Orbital Sander – Self-Generated Unit with Vacuum Hose & Floor Bag 12L1850-27 General: Air Inlet: 1/4” NPT - Use 1/4” (6.4mm) I.D. Hose All tools performance rated @90 psi (620 kPa) air pressure

3.66” x 7”

10,000

2.37

Air Flow: 16 SCFM (453 LPM) Power: 0.24 hp (179 W) Standard Equipment: Operating instructions & parts manual.

1.08

3.94

Orbital Models – back-up pad. Interchangeable grips (3) Optional Equipment: See page 38 for back-up pads.

Right Angle Sanders For Disc Sanding & Polishing

1,250 – 30,000 RPM 0.3 – 1.7 hp (0.22 – 1.27 kW) ■ Suitable for a wide range of

finishing and sanding applications

12-12

12-22

■ Geared or gearless models ■ Front, side, and rear exhaust

models

■ Composite or aluminum housing ■ Choice governed or non-governed

models

10-12

12-13 Gearless

12-22 Heavy Duty Head 12-27 Heavy Duty Head

10-27 Heavy Duty Head

Right Angle Sanders For Disc Sanding & Polishing

Model Number Front Exhaust

Rear Exhaust

Free Speed

Disc Capacity

rpm

Head Height*

lbs.

in.

Collet/ Spindle Size

C C C C

1.1 1.1 1.0 1.0

0.5 0.5 0.5 0.5

6.3 6.3 5.0 5.0

160 160 127 127

2.9 2.9 2.9 2.9

74 74 74 74

1/4” 1/4” 1/4” 1/4”

C C C C

1.1 1.1 1.0 1.0

0.5 0.5 0.5 0.5

6.3 6.3 5.0 5.0

160 160 127 127

1.9 1.9 1.9 1.9

48 48 48 48

1/4”-28 1/4”-28 1/4”-28 1/4”-28

1/4” 1/4” 1/4” 1/4”

C C C

1.1 1.1 1.1

0.5 0.5 0.5

7.1 7.1 7.1

180 180 180

3.9 3.9 3.9

99 99 99

1/4” 1/4” 1/4”

1.7

0.8

7.5

191

2.7

1/4”

3.2

1.5

9.3

236

3.9

5/8-11”

1/4”

3.4 3.4 3.4 3.3 3.3 3.3

1.5 9.8 249 1.5 9.8 249 1.5 9.8 249 1.5 10.5 267 1.5 10.5 267 1.5 10.5 267

3.9 3.9 3.9 3.9 3.9 3.9

99 99 99 99 99 99

5/8”-11” 5/8”-11” 5/8”-11” 5/8”-11” 5/8”-11” 5/8”-11”

1/4” 1/4” 1/4” 1/4” 1/4” 1/4”

3.1 3.1

1.4 1.4

3.9 3.9

99 99

5/8”-11” 5/8”-11”

1/4” 1/4”

Type Housing

Weight

Length

Air Inlet Size

12-12 & 10-12 Series – 0.3 hp (0.22 kW) – 300 Series Collet 12L1201-36 12L1200-36 10L1201-36 10L1200-36

12L1281-36 12L1280-36 10L1281-36 10L1280-36

20,000 12,000 20,000 12,000

2” Sanding/Polishing Disc 3” Sanding/Polishing Disc 2” Sanding/Polishing Disc 3” Sanding/Polishing Disc

12-12 & 10-12 Series – 0.3 hp (0.22 kW) – 1/4”-28 Internal Thread 12L1201-32 12L1200-32 10L1200-32 10B1200-32

12L1281-32 12L1280-32

20,000 12,000 12,000 12,000

2” Sanding/Polishing Disc 3” Sanding/Polishing Disc 3” Sanding/Polishing Disc 3” Sanding/Polishing Disc

12-13 Series – 0.3 hp (0.22 kW) – Gearless – 300 Series Collet 12L1380-36 12L1381-36 12L1382-36•

30,000 1” Sanding/Polishing Disc 25,000 2” Sanding/Polishing Disc 20,000 2” Sanding/Polishing Disc

12-22 Series – 0.6 hp (0.45 kW) – 300 Series Collet – Heavy Duty Head 12L2218-36

18,000 3” Sanding/Polishing Disc

12-22 Series – 0.6 hp (0.45 kW) – 5/8”-11 Threaded Spindle – Heavy Duty Head 12L2251-80•

9,000

5” Sanding/Polishing Disc

12-27 Series – 0.9 hp (0.67 kW) - 5/8” – 11 Threaded Spindle – Heavy Duty Head 12L2752-80 12L2751-80 12L2750-80 12L2762-80• 12L2761-80• 12L2760-80•

11,000 9,000 6,000 4,500** 6,000** 3,300**

4” Sanding/Polishing Disc 5” Sanding/Polishing Disc 7” Sanding/Polishing Disc 7” Sanding/Polishing Disc 7” Sanding/Polishing Disc 7” Sanding/Polishing Disc

C C C C C C

10-27 Series – 0.9 hp (0.67 kW) - 5/8” – 11 Threaded Spindle – Heavy Duty Head 10L2751-80 10L2750-80

9,000 6,000

5” Sanding/Polishing Disc 7” Sanding/Polishing Disc

Housing Guide: A=Aluminum, C=Composite, S=Steel * Over spindle **Governor controlled speeds • Oilless blades General: All tools performance rated @ 90psi (620 kPa) air pressure. Minimum Hose I.D.– 12-12, 10-12, 12-13 Series: 1/4” (4.8mm) 12-22, 12-27, 10-27, Series: 5/16” (7.9mm) 12-42 Series: 1/2” (12.7mm)

A A

8.5 8.5

216 216

Standard Equipment: Applicable collet, collet wrenches 12-13 tools also include grease gun and gear lube Extra Equipment: Collets: See page 26 Overhose (rear exhaust): See page 63

12-22

Belt Sanders

For Woven & Non-Woven Sanding Belts

12,000 – 20,000 RPM 0.3 – 0.5 hp (0.22 – 0.38 kW) ■ Grind, debur, strap polish, blend ■ Choice of geared or gearless ■ Ergonomic housing reduces cold

air transmission to operator

■ 12-23 model accepts

interchangeable arms

12-13

12-12

12-23

Enter Channels

Strap Polish 34

Belt Sanders

For Woven & Non-Woven Sanding Belts

Model Number Front Exhaust

Rear Exhaust

Free Speed

Belt Capacity

rpm

lbs.

kgs.

in.

Air Inlet Size

Straight Straight

1.4 1.4

0.6 0.6

11.3 11.3

287 287

1/4” 1/4”

Straight Straight

1.4 1.7

0.6 0.8

11.3 11.3

287 287

1/4” 1/4”

Straight 2.5 Straight/Offset 2.5

1.1 1.1

15.0 15.0

381 381

1/4” 1/4”

Type Housing

Contact Arm

C C C C

Weight

Length

12-12* Series – 0.3 hp (0.22 kW) – Sanding Belt 12L1281-36B2 12L1280-36B2

20,000 1/2”W x 12”L Sanding Belt 12,000 1/2”W x 12”L Sanding Belt

12-13* Series – 0.3 hp (0.22 kW) – Gearless – Sanding Belt 12L1382-36B2• 12L1382-36B4•

20,000 1/2”W x 12”L Sanding Belt 20,000 1”W x 12”L Sanding Belt

12-23 Series - 0.5 hp (0.38 kW) – Gearless – Woven or Non-Woven Belt 12L2384-B1 12L2384-K1 (Kit)

20,000 5/8”or 3/4”W x 18”L Belt 20,000 (See details below)

Housing Guide: A=Aluminum, C=Composite, S=Steel • Oilless blades General: All tools performance rated @ 90psi (620 kPa) air pressure. Minimum Hose I.D. 1/4” (6.4mm) Standard Equipment: 12-12, 12-13 series: No.80 and No.120 grit sanding belt or one medium grit non-woven belt, applicable wrenches, grease gun, gear lube 12-23 series: Tool and contact arm, adjustment wrench.

C C

Extra Equipment: For lock-off safety lever, substitute “S” for “L” in model number. Overhose (rear exhaust): See pg. 63 Attachments: See pg. 40 Optional Equipment: See pg. 38 for additional belts. *Optional Terminations for 12-12 & 12-13 Series (All models may not be available): -32Bx 1/4”-28 Internal Thread; -36Bx 1/4” collet

Dotco 12L2384-K1 Kit

Kit includes the following:

When you order the Dotco 12L2384K1 kit you get the tool and all three interchangeable arms, belts and wrenches. You’ll be ready for just about any finishing project using the Dotco 12L2384-K1 kit.

Tool with 3/4” wide straight arm (1) Additional Arms (2) 1 – 1/2” wide straight arm 1 – offset arm 1/4” x 18” Aluminum Oxide Belts (3) 1 – 60 grit 1 – 80 grit 1 – 120 grit 1/2” x 18” Aluminum Oxide Belts (3) 1 – 60 grit 1 – 80 grit 1 – 120 grit 3/4” x 18” Aluminum Oxide Belts (2) 1 – 60 grit 1 – 80 grit 3/4” x 18” Non-Woven Belt (1) Medium Wrenches & Misc. Items 1 – 3/4” open end wrench 1 – 9/16” open end wrench 1 – 9/64” hex wrench 1 – 3/16” hex wrench 1 – 1/4” collet 1 – collet cap 1 – chuck body Carrying Case w/Foam Inserts (1)

Buffers/Polishers

For Wire Brushes, Buffing Wheels and Abrasive Sheets

2,200 – 6,200 RPM 0.3 – 1.7 hp (0.22 – 1.27 kW)

12-25

■ Many models to choose from to

meet your application needs

■ Front, side, and rear exhaust

12-10

12-27

10-27

Buffers/Polishers

For Wire Brushes, Buffing Wheels and Abrasive Sheets

Model Number Front Exhaust

Side Exhaust

Rear Exhaust

Free Speed rpm

Capacity Wire Buffing Brush Wheel

Type Housing

Weight

Length

lbs.

kgs

in.

Collet/ Air Spindle Inlet Size Size mm

Height** in.

12-10 Series – 0.3 hp (.22 kW) – 200 Series Collet 12L1093-01 12L1092-01

5,000 3,200

3” 3”

C C

1.6 1.6

0.7 0.7

7.2 7.2

183 183

1/4” 1/4”

4” 4” 4”

6” 6” 6”

C C C

2.1 2.1 2.1

0.9 0.9 0.9

9.3 9.3 9.3

236 236 236

1/4” 1/4” 1/4”

6” 6” 6”

C C A

3.3 3.3 3.9

1.5 1.5 1.8

10.5 10.5 9.3

267 267 236

3.9 3.9 3.9

98 5/8”-11 1/4” 98 5/8”-11 1/4” 98 5/8”-11 1/4”

6.4

2.9

13.6

346

3.9

98 5/8”-11 1/2”

12- 25 Series – 0.9 hp (.67 kW) – 200 Series Collet 12L2594-01 12L2593-01 12L2592-01

6,200 4,700 3,200

12-27 & 10-27 Series – 0.9 hp (.67 kW) – 5/8”-11 Threaded Spindle 12L2762-80• 12L2760-80• 10L2760-80

4,500* 3,300* 3,300*

4” 4” 4”

12-42 Series – 1.7 hp (1.27 kW) - 5/8”-11 External Threaded Spindle 12L4203-80•

3,400

Housing Guide: A=Aluminum, C=Composite, S=Steel *Governor controlled speeds **Over spindle •Oilless blades General: All tools performance rated @ 90psi (620 kPa) air pressure. Minimum Hose I.D.– 12-10 Series: 1/4” (6.4mm) 12-25, 12-27, 10-27, Series: 5/16” (7.9mm) 12-42 Series: 1/2” (12.7mm)

4”

8”

Standard Equipment: 12-10, 12-25: Applicable collet, collet wrenches 10-27, 12-27: Spindle wrench 12-42: Nut, washer, spacer and wrenches. Extra Equipment: Collets: See page 26 Overhose (rear exhaust): See page 62 Dead Handle: (12-10 models) 6188 Dead Handle: (12-25 Models) 8088

12-42

Sander Accessories Low Profile Backup Pads for Random Orbital Sanders A thinner, harder pad generally recommended for aggressive sanding and leveling of flat surfaces. Diameter

Thickness

3 1/2” 5” 6”

3/8” 3/8” 3/8”

PSA Pads

Hook & Loop Pads

Non-Vacuum

Vacuum

Non-Vacuum

Vacuum

543025 543017 543021

543025 543018 543022

543026 543019 543023

543026 543020 543024

543025 543017

543024

Tapered Edge Backup Pads for Random Orbital Sanders A thicker, softer pad generally recommended for contour sanding and feather edging. Diameter

Thickness

5” 6”

3/4” 3/4”

PSA Pads Non-Vacuum

543041 543042

543042

Backup Pads for Orbital Sanders

PSA adhesion to tool eliminates the need for any tools when changing pads. Pad remains flat throughout full orbit at any speed. Diameter

Thickness

3-2/3”x7”

3/8”

PSA Pads

Hook & Loop Pads

Non-Vacuum

Vacuum

Non-Vacuum

Vacuum

543011

–

543014

Belt Sander Attachments Dotco 12-12 and 12-13 series. 300 Series Collet -36 Termination

1/4”-28 Int. Thread -32 Termination

Sanding Belt Size in. mm

in.

Sanding Area mm

Non-Woven Attachments (used with 12,000 rpm 12-12 series) 14-1715

–

1/2” x 18”

13 x 457

1/2” x 6”

13 x 152

Coated Abrasive Attachments (used with 12,000 rpm 12-12 series; 20,000 rpm 12-12 & 12-13 series) 14-1639 14-1316 14-1473 14-1319 14-1613

14-1638 14-1301 14-1463 14-1318 14-1603

1/4” x 12” 1/2” x 12” 1” x 12” 1/2” x 24” 1” x 24”

6.4 x 305 13 x 305 25 x 305 13 x 610 25 x 610

1/4” x 4” 1/2” x 4” 1” x 4” 1/2” x 10” 1” x 10”

6.4 x 102 13 x 102 25 x 102 13 x 254 25 x 254

Sanding Belts – Aluminum Oxide, Resin Bond For use with Dotco belt sanders. Minimum order: 10 of any one belt. Grit Size

40 50 60 80 100 120 150 180 240 320

Belt Number 1/4” x 12

14-1590 14-1591 14-1593 14-1596

1/2” x 12

14-1344 14-1345 14-1346 14-1348 14-1350 14-1352 14-1355 14-1358 14-1360 14-1362

1” x 12

1/2” x 24

1” x 24

1/4” x 18

1/2” x 18

3/4” x 18

14-1582 14-1583

14-1366 14-1368

14-1642

14-2320 14-2321

14-2316 14-2317

14-2326 14-2323

14-1585

14-1372

14-2322

14-2318

14-1588

14-1378

14-1648

Sanding Belts – Non-woven Minimum order: 10 of any one belt. Grit Size

Extra Fine Fine Medium Coarse

Part Number 1/4” x 18 3/4” x 18

14-1728 14-1729 14-1730 14-1731

14-2327

Sander Accessories Spiralcool™ Backing Pads

Sanding Pad Nut

For Dotco sanders with 5/8”-11 threaded spindles. Pad contour develops draft action to cool disc and avoid excessive pick-up.

For use with Dotco sanders with 5/8”-11threaded spindles.

Part Number – Pad Diameter (Max. rated RPM) Flexibility

4” 12,000 rpm

4 1/2” 11,000 rpm

5” 10,000 rpm

7” 7,000 rpm

9” 6,000 rpm

Flexible Medium Rigid

14-2197 14-2198 14-2199

14-2255 14-2256 14-2257

14-2115 14-2116 14-2117

14-2529 14-2200 14-2201

14-2202 14-2203

Part Number

Tool Series

14-2118

5/8”-11 threaded spindle

Spanner Wrench For use with 14-2118 Sanding Nut Pad.

Save-A-Disc Pads

Part Number

Tool Series

14-2319

5/8”-11 threaded spindle

For Dotco sanders with 5/8”-11 threaded spindles. Ribs on the backing plate cause a flexing action which throws off accumulation. 14-2517

Diameter

5” 7” 9”

Part Number Max. rpm

7,500 7,500 7,500

Assembly

Pad Only

Plate Only

Nut Only

14-2515 14-2517 14-2519

14-2521 14-2521 14-2521

14-2522 14-2523

14-2525 14-2525 14-2525

Sanding Disc Cutter An adjustment scale allows a 9” maximum diameter sanding disc to be cut down to 3” or 4” diameter. The double bevel cutting edge assures a round cut without a loose edge or raveling.

PSA Disc Holders

Part Number

Collet Chuck: Chuck the PSA disc holder shank directly into the appropriate collet (1/8” or 1/4”).

Threaded Spindle:

Description

14-2535 Replacement Blades 14-2590 14-2591

14-1112

Remove the threaded shank from the PSA disc holder. Referring to the spindle adapter chart, select the correct spindle and thread it into the PSA holder. Part Number

Disc Holder Diameter

Shank Assembly

PSA Disc Holder Thread

14-1146 14-1105 14-1147 14-1107 14-1170 14-1110 14-1111 14-1112 14-1113 14-1114

1/2” 1/2” 3/4” 3/4” 1” 1” 1-1/2” 2” 3” 4”

1/8” 1/4” 1/8” 1/4” 1/8” 1/4” 1/4” 1/4” 1/4” 1/4”

5-40 Female 5-40 Female 5-40 Female 5-40 Female 5-40 Female 5-40 Female 1/4”-20 Female 1/4”-20 Female 1/4”-20 Female 1/4”-20 Female

Mini Chucks

Disc Cutter

Upper Lower

14-1104

For use with Dotco 12-12 series. To adapt right angle threaded spindle sanders for drilling, disc sanding with PSA holders, and light grinding. Part Number Assembly Collet

Shank Size

1/8” 1/4” 6 mm

14-1102* 14-1104* 14-1094

14-0158** 14-0168*** 14-0170***

* NOTE: For 1/4”-28 internal thread ** NOTE: For 5/16”-24 internal thread – 1/8” collet *** NOTE: For 3/8”-24 internal thread – 1/4” collet

Spindle Adapters For use with PSA Disc holders. Part Number

14-1142 14-1144 14-2903 14-1212 14-1211

14-1144

Adapter Description Thread Thread (for Tool Spindle) (for PSA Disc Holder)

1/4”-28 Male 1/4”-28 Male 5/8”-11 Male 5/8”-11 Male 5/8”-11 Female

5 -40 Male 1/4”-20 Male 5/16”-24 Male 1/4”-20 Male 3/8”-24 Male

Max. Disc Dia.

1” 4” 4” 4” 4”

Drills Introduction

Dotco drills are used daily in applications ranging from aerospace to oil fields and refineries. Three styles are available - pistol grip, straight handle, and right angle models. Drills in this section range from 0.3 – 1.5HP. Plus, dead handles are available for several models. ®

Parts interchangeability Maintenance of tools can be time consuming and expensive. That is why our products have been designed with high parts interchangeability. With fewer parts required to repair our tools, less inventory of parts is required and tools are easier to repair.

Precision parts It’s simple, precision parts let operators manufacture precision products. Whether it is a spindle, a chuck, a motor or an angle head, our parts are manufactured from the finest materials available and are machined to the highest tolerances. It is understandable why we are proud of the .0005” runout on our collet model tools.

Extraordinary new drills, inspired by an extraordinary device. The human hand. The familiar gray Dotco drill has long been the industry workhorse for the high-volume, high-repetition, highprecision demands of today’s assembly line. The new Dotco drills have been dramatically redesigned ergonomically to deliver increased comfort and productivity, while assuring decreased operator fatigue, potential for injury and downtime on the line. And we not only changed the way Dotco drills look. We also changed the way they perform.

ergonomic and performance criteria. The handles of the new 14 Series are more oval, for example, because that’s what fits the human hand better and ensures less slippage. Our human engineering research also led to the addition of a new rubber grip for better temperature control, because compressed air exhaust in a metal housing makes the tool cold to the hand and reduces speed and efficiency.

The miracle of technology and human engineering

Moreover, the ideal is to have the line of action straight down the barrel so that the operator is pushing forward on the tool with the greatest control, the greatest in-line force, the least angular force and the least fatigue to the wrist. That’s why we designed the new drills with ergonomically-critical finger and thumb guides. That’s also why we added a finger lip under the trigger, which keeps the other fingers from interfering with the trigger action.

Technology has allowed us to make these extraordinary improvements. Rapid prototypes are now available through our proprietary design-engineering platform, so we can do modeling in real time and put prototypes in the hands of operators to get immediate feedback on

The trigger, by the way, is practically forceless. It requires only 4 ounces of pressure to engage the trigger. And the trigger mechanism is designed with a pressurized tipvalve, so that once you overcome the initial resistance, you’re off to the races.

Design features double ball bearings for the spindle, pre-loaded for longer bearing life and more accurate spindle control. Vibration and runout are reduced.

Time-proven motor and gear design is well balanced to reduce vibration and extend tool life.

Full feathering is accomplished with our pressurized tip-valve design for speed control while drilling. Each tool is individually checked, aligned and adjusted on our assembly line for minimum chuck runout. Vibration is minimized. Housing is made of durable lightweight industrial grade aluminum.

Gears are machined from alloy steel and heat-treated, with fixed cages to control centers for smooth operation.

Ergonomically critical finger and thumb guides fit the hand and aid in control.

The handles of the new 14 Series are more oval because that’s what fits the human hand better. They are flat where they need to be flat and round where they need to be round ensuring less slippage.

The trigger is practically forceless requiring only 4 ounces of pressure to engage.

Rubber grip acts as a thermal protector and isolates vibration for improved operator comfort.

Finger lip under the trigger keeps other fingers from interfering with the trigger action. Handles are shaped to fit the human hand. They are flat where they need to be flat and round where they need to be round. Minimal noise levels enhance operator comfort.

Inline, Right Angle & Pistol Grip Drills

500 – 28,500 RPM 0.3 – 0.4 hp (0.22 – 0.30 kW) ■ Wide selection of tools to match

15lf

15-14

your application

■ Rear exhaust ■ Select geared models available

330 – 29,000 RPM 0.4 – 0.9 hp (0.30 – 0.67 kW) 14CN

■ Non-reversible ■ Ergonomically critical finger

and thumb guides fit the hand to aid in control ■ Excellent for aerospace, metal fab and woodworking

14CS

14CF

Inline, Right Angle & Pistol Grip Drills Free Speed

Model Number

Weight

Length

Head Ht.

Chuck Air Inlet Size Size

rpm

Drill Diameter Capacity

Type Housing

lbs.

kgs

in.

5,300 4,000 3,300 600

1/4” 1/4” 1/4” 1/4”

C C C C

1.4 1.4 1.4 2.0

0.6 0.6 0.6 0.9

8.0 8.0 8.0 9.3

203 203 203 236

1/4” 1/4” 1/4” 1/4”

3,600* 2,400*

1/4” 1/4”

C C

1.5 1.5

0.7 0.7

8.0 8.0

203 203

3.0 3.0

76 76

1/4” 1/4”

Inline 15LF Series – 0.4 hp (0.30 kW) 15LF081-38+ 15LF082-38+ 15LF083-38+ 15LF087-38+

Right Angle 15-14 Series – 0.3 hp (0.22 kW) 15L1489-38 15L1488-38

Standard Equipment: Jacobs geared chuck, chuck key, dead handle (all inline models with chuck size greater than 1/4”). Extra Equipment: Overhose (rear exhaust): See page 63 Dead Handle: 539602

Housing Guide: A=Aluminum, C=Composite, S=Steel * Planetary geared + Model available without chuck. Replace -38 with -40. General: All Tools performance rated @ 90psi (620 kPa) air pressure. Minimum Hose I.D.– 15LF, 15-14 Series: 1/4” (6.4mm) 15-29 Series: 5/16” (7.9mm)

Free Speed

Model Number With Chuck

Without Chuck

rpm

Drill Diameter Capacity

Geared Chuck Size

Air Inlet Size

lbs.

kgs

in.

29,000 5,200 3,800 3,200 2,400 1,000 700 600

1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4”

1.5 1.5 1.5 1.5 1.6 1.8 1.8 1.8

0.68 0.68 0.68 0.68 0.72 0.82 0.82 0.82

5.7 5.7 5.7 5.7 5.7 6.9 6.9 6.9

145 145 145 145 145 175 175 175

3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8”

1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4”

20,000 6,000 5,200 3,200 1,300 500

1/4” 1/4” 1/4” 1/4” 3/8” 3/8”

2.1 2.1 2.1 2.1 2.9 2.9

0.95 0.95 0.95 0.95 1.31 1.31

6.3 6.3 6.3 6.3 8.1 8.1

160 160 160 160 205 205

1/4” 1/4” 1/4” 1/4” 3/8” 3/8”

1/4” 1/4” 1/4” 1/4” 1/4” 1/4”

20,000 6,000 5,200 3,200 1,300 500

1/4” 1/4” 3/8” 3/8” 3/8” 1/2”

2.2 2.2 2.4 2.4 2.8 3.5

1.00 1.00 1.08 1.08 1.27 1.59

6.8 6.8 7.2 7.2 8.6 9.1

173 173 183 183 218 231

1/4” 1/4” 3/8” 3/8” 3/8” 1/2”

1/4” 1/4” 1/4” 1/4” 1/4” 1/4”

Weight**

Length**

14CF Series – 0.4 hp (0.30 kW) – Non-reversible 14CFS90-38 14CFS91-38 14CFS92-38 14CFS93-38 14CFS94-38 14CFS95-38 14CFS96-38 14CFS97-38

14CS Series – 0.6 hp (0.45 kW) – Non-reversible 14CSL90-38 14CSL98-38 14CSL91-38 14CSL92-38 14CSL95-51 14CSL97-51

14CSL90-40 14CSL98-40 14CSL91-40 14CSL92-40 14CSL95-40 14CSL97-40

14CN Series – 0.9 hp (0.67 kW) – Non-reversible 14CNL90-38 14CNL98-38 14CNL91-51 14CNL92-51 14CNL95-51 14CNL97-53

14CNL90-40 14CNL98-40 14CNL91-40 14CNL92-40 14CNL95-40 14CNL97-40

General: See page 41 for additional features and benefits. Air Inlet: 1/4” NPT – Use 5/16” (7.9mm) I.D. hose. All Tools performance rated @ 90psi (620 kPa) air pressure.

Standard Equipment: 14CF: Jacobs geared chuck, chuck key 14CS, 14CN: Jacobs geared chuck, chuck key, dead handle (All models with a chuck opening greater than 1/2”) Extra Equipment: Overhose: See pg. 63

Pistol Grip & Variable Speed Drills

3,200 – 6,000 RPM 1.4 hp (1.04 kW) ■ Trigger Start 14CHL92-40

■ Non reversible ■ Rear exhaust

160 – 1400 rpm 1.0 HP (0.75 kW) ■ Trigger Start ■ Non-reversible

15dp-14b-49

15dp-8b-53

600 – 2600 rpm 0.7 HP (0.5 kW) ■ Sand cast handle ■ Hardened steel back cap ■ Governed speed control ■ Variable speed ■ Calibrated speed control ■ Non-reversible

135 dpv-7b-43

Pistol Grip & Variable Speed Drills Model

Termination

RPM

14CHL92-40 14CHL92-38 14CHL92-51 14CHL92-53 14CHL98-40 14CHL98-38 14CHL98-51 14CHL98-53

3/8”-24 External Threads 1/4” Jacobs Chuck 3/8” Jacobs Chuck 1/2” Jacobs Chuck 3/8”-24 External Threads 1/4” Jacobs Chuck 3/8” Jacobs Chuck 1/2” Jacobs Chuck

3,200 3,200 3,200 3,200 6,000 6,000 6,000 6,000

Weight

Length

Lbs

2.37 2.63 2.83 3.79 2.37 2.63 2.83 3.79

1.08 1.20 1.29 1.72 1.08 1.20 1.29 1.72

5.50 6.53 7.05 7.44 5.50 6.53 7.05 7.44

140 166 179 189 140 166 179 189

Air Inlet

3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8”

General: All tools performance rated @ 90 PSI (620 kPa) air pressure. All tools rated at 86 dBA. All models with chuck opening greater than ½” have side handle standard.

Model Number

Free Speed

Stall Torque

rpm

Chuck Capacity*

Length

Weight

ft. lbs.

in.

lbs.

160† 44† 22 14

217† 60.0† 30.0 19.0

1/2 1/2 1/2 3/8

13 13 13 10

9 3/4 8 1/2 8 1/2 8 1/4

248 216 216 210

6 5 1/2 5 1/2 4 1/2

2.7 2.5 2.5 2.0

1.0 hp (0.67 kW) – Non-reversible 15DP-1.6B-53 15DP-4B-53 15DP-8B-53 15DP-14B-49

160 400 800 1400

General: Air Inlet: 3/8” NPTF Minimum Hose Size: 3/8” Spindle Thread: 1/2”-20 Spindle Offset: Pistol Grip: 31/32”

*Capacity CAUTION NOTE: . Pistol Grip 15 Series Drills must be equipped with support handle (881580) when used with chucks larger than 3/8” capacity. † Theoretical stall torque based on gear reduction. These tools are intended for slow speed applications and not high torque applications. High maintenance should be expected if tools are operated in their upper torque range.

Standard Equipment: Operating instructions and service manual Dead handles on all models except 15DP-14B 3-Jaw Chuck and Key

Model Number

caution: High reaction torque may be experienced with any drill at breakthrough. Caution must be exercised when using any cutting tool because of the possibility of the cutting tool bending or breaking. Cutting tool maximum speed rating must equal or exceed speed of tool. Eye protection must be worn while operating power tools.

Speed (rpm) Free

Governed

Chuck Capacity* in.

Length in.

Weight mm

lbs.

0.7 hp (0.5 kW) – Variable Speed 135DPV-7B-43 600 150 - 550 135DPV-7B-50 600 150 - 550 135DPV-14B-50 1250 400 - 1200 135DPV-14B-51 1250 400 - 1200 135DPV-28B-51 2600 700 - 2400 General: Air Inlet: 1/4” NPT Minimum Hose Size: 1/4” (6mm) Spindle Offset: 25/32” (20mm) Tool performance rated at 90 psi (620kPa) air pressure. Standard Equipment: Operating instructions and service manual 3-Jaw Chuck and Key

3/8 10 9 5/8 244 3 5/8 1.6 1/2 13 9 5/8 244 3 5/8 1.6 1/2 13 9 1/4 235 3 3/8 1.5 3/8 10 9 1/4 235 3 3/8 1.5 3/8 10 8 1/2 216 3 1/8 1.4 * Capacity CAUTION NOTE: . 135DPV Drills must be equipped with support handle (861006) if 1/2” (13mm) capacity chuck is specified. caution: High reaction torque may be experienced with any drill at breakthrough. Caution must be exercised when using any cutting tool because of the possibility of the cutting tool bending or breaking. Cutting tool maximum speed rating must equal or exceed speed of tool. Eye protection must be worn while operating power tools.

Right Angle Drills

320 – 5,600 RPM 0.4 – 0.9 hp (0.30 – 0.67 kW) ■ An impressive number of speeds

to match your drilling application

■ Wide range of angle head

designs – 45°, mini 90°, 360°, compact or heavy duty 90°

15lf

15ls

15lf

15ln

Optional Angle Heads (NOTE: All models not available with all angle heads.) Termination

Spindle Thread

Termination

600 Series Mini Angle Head -61 #10-32 Internal -62 1/4”-28 Internal -63 9/32”-40 Internal -64 5/16”-24 Internal

Termination

Spindle Thread

360 Degree Mini Angle Head -91 #10-32 Internal -92 1/4”-28 Internal

360º Series

Spindle Thread

500 Series Heavy Duty Angle Head -52 1/4”-28 Internal -53 9/32”-40 Internal -54 5/16”-24 Internal -55 3/8”-24 Internal -59 1/4” Cap. 3 jaw chuck -59NC 3/8”-24 Male Thread

600 Series Termination

Spindle Thread

700 Series Compact Angle Head -72 1/4”-28 Internal -73 9/32”-40 Internal -74 5/16”-24 Internal

500 Series Termination

Spindle Thread

45 Degree Mini Angle Head -42 1/4”-28 Internal -43 9/32”-40 Internal -44 5/16”-24 Internal

500 Series

700 Series 45º Series

Right Angle Drills Model Number

Free Speed rpm

Drill Diameter Capacity

Type Housing

Weight

Length

Spindle Size

Air Inlet Size

lbs.

in.

C C C C C C C

1.6 1.6 1.6 1.8 1.9 1.9 1.9

0.75 0.75 0.75 0.85 0.85 0.85 0.85

10.7 10.7 10.7 11.1 11.8 11.8 11.8

272 272 272 282 300 300 300

1/4”-28* 1/4”-28* 1/4”-28* 1/4”-28* 1/4”-28* 1/4”-28* 1/4”-28*

1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4”

C C C C C C C

2.3 2.3 2.3 1.8 1.9 1.9 1.9

1.05 1.05 1.05 0.85 0.85 0.85 0.85

11.5 11.5 11.5 12.4 12.7 12.7 12.7

292 292 292 315 323 323 323

1/4”-28* 1/4”-28* 1/4”-28* 1/4”-28* 1/4”-28* 1/4”-28* 1/4”-28*

1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4”

C C C C

2.5 2.5 2.5 2.5

1.15 1.15 1.15 1.15

12.0 12.0 12.0 12.0

305 305 305 305

1/4”-28* 1/4”-28* 1/4”-28* 1/4”-28*

1/4” 1/4” 1/4” 1/4”

1.7 1.7 1.7 2.0 2.0 2.0

0.75 0.75 0.75 0.95 0.95 0.95

11.0 11.0 11.0 12.0 12.0 12.0

280 280 280 305 305 305

1/4”-28* 1/4”-28* 1/4”-28* 1/4”-28* 1/4”-28* 1/4”-28*

1/4” 1/4” 1/4” 1/4” 1/4” 1/4”

2.4 2.4 2.4 2.8

1.05 1.05 1.05 1.25

11.0 11.0 11.0 12.3

297 297 297 330

1/4”-28* 1/4”-28* 1/4”-28* 1/4”-28*

1/4” 1/4” 1/4” 1/4”

2.6 2.6 2.6 2.6 3.0 3.0 3.0 3.0

1.15 1.15 1.15 1.15 1.35 1.35 1.35 1.35

11.5 11.5 11.5 11.5 12.8 12.8 12.8 12.8

310 310 310 310 343 343 343 343

1/4”-28* 1/4”-28* 1/4”-28* 1/4”-28* 1/4”-28* 1/4”-28* 1/4”-28* 1/4”-28*

1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4”

Light Duty Head – 15LF Series – 0.4 hp (0.30 kW) – Rear Exhaust 15LF281-62 15LF282-62 15LF283-62 15LF284-62 15LF285-62 15LF286-62 15LF287-62

5,300 4,000 3,300 2,400 1,000 750 600

1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4”

Light Duty Head – 15LS Series – 0.6 hp (0.45 kW) – Rear Exhaust 15LS281-62 15LS282-62 15LS283-62 15LS284-62 15LS285-62 15LS286-62 15LS287-62

5,430 3,370 2,010 1,660 1,360 840 500

1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4”

Light Duty Head – 15LN Series – 0.9 hp (0.67 kW) – Rear Exhaust 15LN288-62 15LN281-62 15LN282-62 15LN284-62

5,600 5,000 3,100 1,530

1/4” 1/4” 1/4” 1/4”

Heavy Duty Head – 15LF Series – 0.4 hp (0.30 kW) – Rear Exhaust 15LF281-52 15LF282-52 15LF283-52 15LF285-52 15LF286-52 15LF287-52

3,700 2,800 2,300 700 525 420

1/4” 1/4” 1/4” 1/4” 1/4” 1/4”

C C C C C C

Heavy Duty Head – 15LS Series – 0.6 hp (0.45 kW) – Rear Exhaust 15LS281-52 15LS282-52 15LS283-52 15LS287-52

3,800 2,360 1,410 350

1/4” 1/4” 1/4” 1/4”

C C C C

Heavy Duty Head – 15LN Series – 0.9 hp (0.67 kW) – Rear Exhaust 15LN288-52 15LN281-52 15LN282-52 15LN283-52 15LN284-52 15LN285-52 15LN286-52 15LN287-52

3,900 3,500 2,170 1,300 1,070 870 540 320

1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4”

Housing Guide: A=Aluminum, C=Composite, S=Steel * Internal Thread General: Minimum Hose I.D.– 15LF, 15LS, 15LN Series: 1/4” (6.4mm) All Tools performance rated @ 90psi (620 kPa) air pressure. Standard Equipment: Light Duty Tools: 600 Series Mini Angle Head with 1/4”-28 internal thread Heavy Duty Tools: 500 Series Heavy Duty Angle Head with 1/4”-28 internal thread

C C C C C C C C

Extra Equipment: For lock-off safety lever, substitute “S” for “L” in model number. Overhose (rear exhaust): See page 63 Collets for 9/32”-40 terminations: See page 48 Optional Chuck Terminations: NOTE: The Light Duty model numbers shown in the above table are equipped with the 600 series (-62) angle head with 1/4”-28 internal thread. The Heavy Duty model numbers are equipped with the 500 series (-52) angle head with 1/4”-28 internal thread. To order other angle head configurations, the proper termination code from the charts on page 49 must be specified, in place of the standard -62 or -52 termination, when ordering. All models not available with all angle heads.

Drill Accessories Mini Chucks For use with DOTCO 12-12 series. To adapt right angle threaded spindle sanders for drilling, disc sanding with PSA holders, and light grinding. Shank Size

Assembly

Collet

1/8” 1/4” 6 mm

14-1102* 14-1104* 14-1094

14-0158** 14-0168*** 14-0170***

* NOTE: For 1/4”-28 internal thread ** NOTE: For 5/16”-24 internal thread – 1/8” collet *** NOTE: For 3/8”-24 internal thread – 1/4” collet

Quick Change Pressure Foot Adapter For use on 1”-20 external thread tools. Part Number

Diameter “A”

1110164 1110165 1110166 1110167

1.375/1.373 1.437/1.435 1.501/1.499 1.626/1.623

1110164

14-1104

Vacuum Attachment For use on Dotco pistol grip drills.

Cone Jaw Chuck Part No.

Part Number

Description

Small Handle Tools

1020699 1/4” capacity with a 1/4”-28 male thread

1025867

Shop Vac Shroud Only

Large Handle Tools

Jacobs Chucks Thread Size

Part No.

Capacity

Description

1005078 3/8”-24 1/4” 1 BA 1001505 3/8”-24 1/4” HD 7 BA 3/8” Keyless (31073) 1110945 3/8”-24 863420 3/8”-24 3/8” 22 BA (lt.duty) 1004422 3/8”-24 3/8” 2 BA (med.duty) 1001252 3/8”-24 3/8” 41 BA (med.duty) 1009726 3/8”-24 1/2” 33 BA *OB 1075 5/16”-24 5/32”

1025867 1025891

Term.

-38 -42 -56 -47 -43 -51 -53 37

Shop Vac Shroud Only Shroud, Venturi Vacuum Attachment & Bag

1001252

Retrofit Kits

Dead Handles Drill Model

Part Number

8 111 135 15 136

861006 861006 861006 881580 861006

Retrofit your existing Dotco 15CFS and Buckeye 21D drills to the new Dotco 14CFS series. Part No.

Retrofit Kit For

01-1401 01-1402

Dotco 15CFS series Buckeye 21D series

881580

300 Series Collet Chuck Use with Standard Collet: 1/4” (#308). Termination Number: -36 Part Number

Description

14-1148

1/64”-1/4” capacity with a 5/16”-24 female thread

Capacity

Part Number

3/8”-24

1/4” Hex

849414

Collet Chuck (1/4-28 Male Thread)

Drill Size

Part Number

3/16” 1/4”

863810 863806

1005184

For use on Dotco 15LF, 15LS & 15LN right angle drills with 9/32”-40 spindles. (Termination codes: - 43, -53, -63, -73, & -93)

Quick-Change Chuck Thread Size

Collets

863810

Drill

Part Number

Size

Dec.

Part Number

Size

Dec.

1005180 1005182 1005183 1005184 1005185 1005186 1005187 1005188 1006408 1006412 1005875 1005684 1006395

1/16 3/32 7/64 1/8 9/64 5/32 11/64 3/16 53 51 46 40 39

.0625 .0937 .1094 .125 .1406 .1562 .1719 .1875 .0595 .067 .081 .098 .0995

1.6 2.4 2.8 3.2 3.6 4.0 4.4 4.8 1.5 1.7 2.1 2.5 2.5

1005873 1013904 1005872 1006373 1005926 1005682 1005876 1006035 1005977 1005927 1005871 1006001 1005681

31 30 27 26 22 21 20 19 17 13 12 11 10

.120 .1285 .144 .147 .157 .159 .161 .166 .173 .185 .189 .191 .1935

3.0 3.3 3.7 3.7 4.0 4.0 4.1 4.2 4.4 4.7 4.8 4.9 4.9

Drill Accessories Optional Drill Attachments

For use on Dotco 15LF, 15LS, and 15LN series. Capacity: 1/4” Diameter Drill These drill attachments can be ordered as a separate accessory item or as part of a complete model. To order as a complete model, use the basic model number from the appropriate 15LF, 15LS, or 15LN catalog page and replace the termination number (-32 for example) with the termination number of the desired optional attachment (-71 for example) from this page. Part Number

Termination

Spindle Thread

Compact Angle Head – 700 Series 1025477 1025476 1025668

-72 -73 -74

1/4”-28 Internal Thread 9/32”-40 Internal Thread 5/16”-24 Internal Thread

-61 -62 -63 -64

#10-32 Internal Thread 1/4”-28 Internal Thread 9/32”-40 Internal Thread 5/16”-24 Internal Thread

1025447

Mini Angle Head – 600 Series 1025314 1025409 1025313 1025328

1025409

Heavy Duty Angle Head – 500 Series 1021289 1021292 1021291 1025780

-52 -53 -54 -55

1/4”-28 Internal Thread 9/32”-40 Internal Thread 5/16”-24 Internal Thread 3/8”-24 Internal Thread

-42 -43 -44

1/4”-28 Internal Thread 9/32”-40 Internal Thread 5/16”-24 Internal Thread

-91 -92

#10-32 Internal Thread 1/4”-28 Internal Thread

1021289

45º Angle Head 1025730 1025731 1025733

1025730

360º Angle Head 1025696 1025694

1025694

Part No.

Termination

Drill Chuck

Heavy Duty Angle Head 1021620 1021620

-59 -59 NC

500 Series Angle Head with drill chuck, 1/4” capacity 500 Series Angle Head, no chuck 3/8”-24 ext. thread

1021620

Routers

9,000 – 34,000 RPM 0.3 – 1.7 hp (0.22 – 1.27 kW) ■ All models oil free

12-20 12-10

■ Patent pending governed design

allows the tool to idle for long life but provides full power under load

■ Roll valve gives easy, convenient

operation

12-25

*Router guides not included.

10-43

11-43

12-40

Routers Free Speed

Type Housing

Shank Diameter Capacity

lbs.

in.

Air Inlet Size

34,000 30,000

C C

1/4” 1/4”

1.4 1.4

0.6 0.6

6.7 6.7

170 170

1/4” 1/4”

12L2080-01RT 12L2081-01RT•

25,000 20,000

C C

1/4” 1/4”

1.9 1.9

0.9 0.9

7.5 7.5

191 191

1/4” 1/4”

12L2580-01RT 12L2582-01RT• 12L2580-0124RT 12L2582-0124RT•

23,000 18,000 23,000 18,000

C C C C

1/4” 1/4” 3/8” 3/8”

2.6 2.6 2.6 2.6

1.2 1.2 1.2 1.2

7.1 7.1 7.1 7.1

180 180 180 180

1/4” 1/4” 1/4” 1/4”

18,000

1/4”

4.2

1.9

11.3

287

1/2”

18,000 16,000 9,000

A A A

3/8” 3/8” 3/8”

7.4 7.4 7.4

3.4 3.4 3.4

7.1 7.1 7.1

180 180 180

1/2” 1/2” 1/2”

3/8”

5.5

2.5

7.1

180

1/2”

Model Number Front Exhaust

Side Exhaust

Rear Exhaust

rpm

Weight

Length

12-10 Series – 0.3 hp (.22 kW) 12L1001-36RT 12L1000-36RT

12-20 Series – 0.6 hp (.45 kW) 12L2000-01RT 12L2001-01RT•

12-25 Series – 0.9 hp (.67 kW) 12L2500-01RT

12-40 Series – 1.7 hp (1.27 kW) 12L4018-01•

10-43 Series – 1.7 hp (1.27 kW) – Base Mount 10T4318-62• 10T4316-62• 10T4309-62•

11-43 Series* – 1.7 hp (1.27 kW) – Mountable Motor Unit 11T4318-62• Housing Guide: A=Aluminum, C=Composite, S=Steel *NOTE: The 11-43 series is the power unit of the 10-43 series. • Oilless blades General: Minimum Hose I.D.– 12-10 Series: 1/4” (6.4mm) 12-20, 12-25 Series: 5/16” (7.9mm) 12-40,10-43, 11-43 Series: 1/2” (12.7mm) All tools performance rated @ 90psi (620 kPa) air pressure.

18,000

Standard Equipment: Collet, applicable wrenches Extra Equipment: Collets: See page 26 Overhose (rear exhaust): See page 63 Attachment Guides: See pg. 52

12-10

Router Accessories Router Assemblies For use with Dotco 12-10, 12-20 and 12-25 series. Tool Series

Part Number

Cutter Shank Capacity

Complete Attachment

Nose Housing

Bearing

Ring

Lock Nut

Router Housing

1/4” 1/4” 3/8” 1/4”

14-2187 14-2180 14-2429 7197

14-2176 14-2176 14-2426

14-0508 14-0508 14-0533 14-0508

1098 1098 1068 1098

14-2082 14-2082 14-2082 N/A

14-1180 14-2180 14-2180 N/A

12-10 12-20/12-25 12-20/12-25 12-12/12-22/12-27

For use with Dotco 12-40 series. Tool Series

12-40 12-40

14-2180

Internal Bowed Retaining Ring

Cutter Shank Capacity

1/4” 3/8”

Part Number Nose Housing

Bearing

Retaining Ring

4272 4263

14-0508 14-0533

1098 1068

Ball Bearing

Router Guides For use on Dotco 12-10, 12-20, 12-20, 12-25 and 12-40 series. 5/8-18NF

.390” DIA

offset 1/2” (“B” dimension minus router bit dia.)

The minimum router bit length (OAL) to be used is determined by the formula: OAL = 1-13/16”+C+P (series 12-10); OAL = 2”+C+P (series 12-20 & 12-25). “C” is the “C” dimension of the router guide and “P” is the desired protrusion of the router bit.

Important: Insert bit into collet as far as possible, then pull out 1/16” and tighten collet.

In an emergency, if it is necessary to pull out the bit more than 1/4”, be sure to insert a short length of blank shank (not to exceed 5/8” long) in the bottom of the collet before inserting the bit.

Part Number

Dimensions (in.) B C

For Router Bits with 1/4” Shanks 14-2703 14-2400 14-2401 14-2402 14-2406 14-2407 14-2408 14-2411 14-2412 14-2413 14-2414 14-2417 14-2420 14-2421 14-2500 14-2501 14-2502 14-2505 14-2506 14-2507 14-2510 14-2511 14-2512 14-2600

3/4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 2 1/2

3/8 3/8 3/8 3/8 7/16 7/16 7/16 1/2 1/2 1/2 1/2 9/16 5/8 5/8 3/8 3/8 3/8 7/16 7/16 7/16 1/2 1/2 1/2 1/2

1/2 1/8 1/4 3/8 1/8 1/4 3/8 1/4 1/2 5/8 3/4 1/8 1/8 5/8 1/8 1/4 3/8 1/8 1/4 3/8 1/4 3/8 1/2 1/2

1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 3/16

Part Number

Dimensions (in.) B C

For Router Bits with 3/8” Shanks 14-2531 14-2538 14-2539 14-2540 14-2541 14-2542 14-2893 14-2925 14-2544 14-2240 14-2632 14-2633 14-2634 14-2630 14-2635 14-2243 14-2636 14-2631

1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2

1/2 1/2 1/2 9/16 9/16 9/16 5/8 5/8 5/8 1/2 1/2 1/2 9/16 9/16 9/16 5/8 5/8 5/8

3/8 1/2 5/8 3/8 1/2 5/8 3/8 1/2 5/8 3/8 1/2 5/8 3/8 1/2 5/8 3/8 1/2 5/8

1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8

Router Accessories Dotco 10-43 Series Router Template Guides Dimensions in Inches A B C

Part Number

14-4019 14-4020 14-4021

5/16 3/8 9/16

3/8 7/16 5/8

For Use w/Router Bits Up To:

3/16 5/16 3/16

1/4” 5/16” 1/2”

14-4020

Rivet Trimmer Attachment For use on Dotco 12-12 series front or rear exhaust collet models. Trims “pop” or “blind” rivets up to 3/16” diameter, also suitable for shaving small welds. Micrometer adjustment controls height of cut to .001”. Runner pads minimize scratching of the work surface. Part No.

Diameter

Shank

Length

Description

Recommended Use

3/4” 1/2”

1/4” 1/4”

1 7/8” 1 7/8”

Inverted Cone, carbide Cylindrical, carbide

Steel Rivets Shaving welds

Trimmer

14-1723

Cutters 14-1732 14-1332

Two Handed Router Base Use with front or rear exhaust collet models. Two handed control for router applications. Easy depth adjustment. Can also be used with 10-43 template guides. Cutters: 14-2442 (combination flush/bevel 22°) Part Number

Series

14-1577 14-2577

Dotco 12-10 Series Dotco 12-20 & 12-25 Series

Laminate Trimmer Attachment Part Number

Series

14-1178 14-2178

Dotco 12-10 Series Dotco 12-20 & 12-25 Series

14-2577 14-2178

Saws

12-12

9,000 – 34,000 RPM 0.3 – 1.7 hp (0.22 – 1.27 kW)

12-22

12-27

12-42

136 Series Band Saw ■ Variable Speed Control

136BS

■ Adjustable Handle ■ Lock-off Lever Start

Saws Free Speed rpm

Saw Blade Capacity

Maximum Depth of Cut*

lbs.

in.

Air Inlet Size

14,000

9/16”

2 1/2”

2.1

1.0

8.9

226

1/4”

14,000

9/16”

2 1/2”

2.3

1.0

10.9

277

1/4”

20,000 12,000 2,400 20,000 12,000

2” 2” 2” 2” 2”

7/16” 7/16” 7/16” 7/16” 7/16”

1.3 1.3 1.6 2.3 2.3

0.6 0.6 0.7 1.0 1.0

7.1 7.1 8.9 7.1 7.1

180 180 226 180 180

1/4” 1/4” 1/4” 1/4” 1/4”

12S2774-02 (Floor bag)

4,700 940 4,700 940 11,000 7,000

2 1/2” 2 1/2” 4” 4” 4” 4”

9/16” 9/16” 1” 1” 1” 1”

4.6 5.6 5.2 6.2 4.8 6.5

2.1 2.5 2.4 2.8 2.2 2.9

13.2 15.0 14.5 16.2 11.4 14.1

335 381 368 411 290 358

1/4” 1/4” 1/4” 1/4” 1/4” 1/4”

12S4225-03• (Vac Adapt) 12S4225-02 (Floor bag)

8,600 5,800 8,500 8,500

4” 4” 4” 4”

1” 1” 1” 1”

7.9 7.9 9.2 9.2

3.6 3.6 4.2 4.2

15.5 15.5 17.0 17.0

394 394 432 432

1/2” 1/2” 1/2” 1/2”

Model Number Front Exhaust

Side Exhaust

Rear Exhaust

Vacuum

Weight

Length

12-20 Series – 0.6 hp (0.45 kW) – Oscillating – Inline 12L2065-90•

12-22 Series – 0.6 hp (0.45 kW) – Oscillating – Right Angle 12L2240-90•

12-12 Series - 0.3 hp (0.22 kW) 12S1283-02 12S1282-02 12S1288-02 12S1274-03 (Vac Ready) 12S1273-03 (Vac Ready)

12-27 Series - 0.9 hp (0.67 kW) 12S2794-01 (Vac Ready) 12S2792-01 (Vac Ready) 12S2794-02 (Vac Ready) 12S2792-02 (Vac Ready) 12S2749-01

12-42 Series - 1.7 hp (1.27 kW) 12S4218-01• 12S4216-01•

*NOTE: Maximum depth of cut is based on maximum saw blade capacity. General: Minimum Hose I.D.– 12-12 Series: 1/4” (6.4mm) 12-20,12-22, 12-25, 12-27 Series: 5/16” (7.9mm) 12-42 Series: 1/2” (12.7mm) All tools performance rated @ 90psi (620 kPa) air pressure. Standard Equipment: Applicable wrenches, oilless blades (•) 12-27 & 12-42 Series: 3/4” Arbor adapter. Extra Equipment: Overhose (rear exhaust): See page 63 Blades: See pg. 56

Model

Cutting Capacity in.

Vacuum conversion kits for standard models see pg. 57 Arbor Adapters (12-7 Models): Order 14-2596 and 14-2597 to adapt to 3/4” arbor hole saw blades. Optional Equipment: 12-27 & 12-42 Arbor adapters: May be substituted on request: 1/2” arbor hole – 2 spacers (14-2575) 5/8” arbor hole – bushing (14-2574) 7/8” arbor hole – bushing (14-2576) 1” arbor hole – bushing (14-2572)

Length

Blade Capacity

Height

Width

Weight

in.

lbs.

44 7/8 x 1/2 x .02

1140 x 12.7 x .5

22.25

565

7.0

178

8.3

211

12.5

5.7

136 Series Band Saw – .75 hp (.56 kW) 136BSV-4

4.8

122

General: Air Inlet: 1/4" NPTF Minimum Hose Size: 1/4" Tool performance rated at 90 psi (620kPa) air pressure.

Standard Equipment: Operating instructions and service manual 18 teeth/in. blade: 204271 Optional Equipment: 24 teeth/in. blade: 204272

Saw Accessories

14-1891

Part Number

14-2700

14-2928

Diameter

Recommended Use (Guidelines only)

Maximum Depth Maximum rpm & Width of Cut

Type

Saw Blades – 1/4” arbor hole 14-1875

1 1/4”

High Speed Steel 22 Teeth

3/32” x 1/16”