INDUSTRIAL POWER TOOLS
Cordless 25
R
Industrial Cordless Tools
Tool Selection Chart
Torque Range Reference Torque is a very important reference value while choosing a right tool for tightening. Due to the actual tighten torque may vary because of nut sizes, joint types and working environment, the above table is only for a reference to choose a right tool. When the torque is at the mean value of the torque range, the tool provides the best performance.
Tightening Torque (N.m) This table shows the recommended tightening torque for common bolt size M2 to M16. According to ISO 898-1 Bolt Size mm M2 M3 M4 M5 M6
3.6 0.10 0.35 0.81 1.60 2.80
4.6 0.13 0.46 1.10 2.20 3.70
4.8 0.17 0.61 1.40 2.95 4.90
Bolt Grade 5.8 8.8 0.22 0.35 0.77 1.20 1.80 2.90 3.60 5.70 6.10 9.80
10.9 0.49 1.70 4.00 8.10 14.0
12.9 0.58 2.10 4.90 9.70 17.0
Bolt Size mm M8 M10 M12 M14 M16
4.6 8.9 17 30 48 74
4.8 10.5 21 36 58 88
Bolt Grade 5.8 8.8 15 24 29 47 51 81 80 128 123 197
N.m 6 7 8 9 10 11 12 13
kg-cm 61.18 71.38 81.58 91.77 101.97 112.17 122.37 132.56
10.9 33 65 114 181 277
12.9 40 79 136 217 333
Torque Conversion N.m 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5
26
kg-cm 8.16 9.18 10.20 11.22 12.24 13.26 14.28 15.30
in-lbs 7.08 7.97 8.85 9.74 10.62 11.51 12.39 13.28
N.m 1.6 1.7 1.8 1.9 2 3 4 5
kg-cm 16.32 17.34 18.35 19.37 20.39 30.59 40.79 50.99
in-lbs 14.16 15.05 15.93 16.82 17.70 26.55 35.40 44.25
in-lbs 53.10 61.95 70.81 79.66 88.51 97.36 106.21 115.06
R
<SCB series>
Industrial Cordless Tools
Programmer (One programmer fits all SCB series tools) Increase tool speed
Decrease tool speed
● Easy to set the tool speed. 1.High speed for metallic assemblies. 2.Medium speed for plastic assemblies. 3.Low speed for special assemblies.
● Total used time display function.
● Total operation count display function.
● Trip operation count display function.
27
<SCB series>
Industrial Cordless Tools
Cordless Shut-off Screwdriver SCB series
User can distinguish the torque at a glance of color.
( Brushless motor )
LED light for working in dark area.
Trigger repeat protection avoid double hits on already seated screw.
Easy attached sliding battery system.
Soft grip handle reduces vibration and fatigue.
High capacity Li-ion battery pack delivers longer run-time.
Mini USB Connector: Tool speed can be adjusted by the extra programmer.
When the arrow mark is blue, it means the tool is in the reverse operation. A green light tells the operator that the preset torque is reached and the tightening is OK.
Touch switch for F/R operation.
A red light and one long "beep" sound tell the operator that the preset torque is not reached,the screwing fastener must be performed again. A flashing yellow light and five short "beep" sounds give an early warning when it is time for recharging.
LED indicator provides simple process information to the operator. The signal is visible from any angle.
28
A yellow light and one long "beep" sound mean a battery lock that indicates the tool can't work and MUST change the battery pack immediately.
R
R
<SCB series>
Industrial Cordless Tools
Advanced brushless motor.
Precise alloy steel gear for high durability.
Torque adjustment.
Precision clutch for torque accuracy.
(Beep Tone)
APPLICATIONS ● Assembly applications where torque accuracy is required. ● Areas where pneumatic or electric tools are impractical to use due to hoses/cables. ● Especially used on car interior assembly. ● Attaching components to the dashboard. ● Hose clips on turbo chargers and air intakes,heating and climate systems and coolant circuits.
PRODUCT STRENGTHS ● Adopting with the innovative Lithium-ion battery technology that extends the operating time of one full charged battery to be longer than the Ni-Cad and the Ni-MH battery. ● Lithium-ion battery has no memory effect which extends the cycle life of the battery. ● The unique design of low battery warning that reminds operators the time to change the battery. ● Brushless motor has longer life time and wear free for low maintenance and spare part costs. ● Tool speed can be adjusted for different applications. ● Soft grip handle reduces vibration and fatigue. ● Torque accuracy : Meet ISO 5393 Cmk>2 at ± 10% tolerance
SPECIFICATIONS Model
Volt.
Drive Size
Screw Size
Torque Range
Free Speed
V
in
mm
N.m（ft-lb）
rpm
Weight w/o Batt. kg
Vibration Value
Noise Level
m/s2
dB(A)
High speed for short cycle times
<2.5
<75
<2.5
<75
<2.5
<75
<2.5
<75
Application
lb
SC180BBS3
18
1/4” Hex. M3~M4
0.8~3 ( 0.6~2.2 )
500~1,550 0.95 2.1
SC180BBS6
18
1/4” Hex. M3~M5
1~6 ( 0.7~4.4 )
300~900
0.95 2.1 Special for hose clip
SC180BBS9
18
1/4” Hex. M3~M5
1.5~9 ( 1.1~6.6 )
300~700
0.95 2.1
SC180BBS12
18
1/4” Hex. M4~M6
2~12 ( 1.5~9 )
250~550
0.95 2.1 Broad torque range
Combination of speed and torque
★ Adjustment screwdriver , suspension bail , marking color ring are included with the tool.
29
<SC series>
Industrial Cordless Tools
Cordless Shut-off Screwdriver SC series
( Brush motor )
LED light for working in dark area.
Press button for easy Forward/ Reverse operation.
Trigger repeat protection avoid double hits on already seated screw. Ergonomical handle design provides a well-balance.
Easy attached sliding battery system.
High capacity 3.0 A.h Li-ion battery pack delivers longer run-time.
LED indicator provides simple process information to the operator.
A green light tells the operator that the preset torque is reached and the tightening is OK. A red light and one long "beep" sound tell the operator that the preset torque is not reached,the screwing fastener must be performed again. A flashing yellow light and five short "beep" sounds give an early warning when it is time for recharging. A yellow light and one long "beep" sound mean a battery lock that indicates the tool can't work and MUST change the battery pack immediately.
APPLICATIONS ● Assembly applications where torque accuracy is required. ● Areas where pneumatic or electric tools are impractical to use due to hoses/cables. ● Especially used on car interior assembly. ● Attaching components to the dashboard. ● Hose clips on turbo chargers and air intakes,heating and climate systems and coolant circuits.
PRODUCT STRENGTHS ● Adopting with the innovative Lithium-ion battery technology that extends the operating time of one full charged battery to be longer than the Ni-Cad and the Ni-MH battery. ● Lithium-ion battery has no memory effect which extends the cycle life of the battery. ● The unique design of low battery warning that reminds operators the time to change the battery. ● The ergonomic handle design makes work easier and effort-saving that promotes the work efficiency. ● Torque accuracy : Meet ISO 5393 Cmk>2 at ± 10% tolerance 30
R
R
<SC series>
Industrial Cordless Tools
High performance brush motor.
Precise alloy steel gear for high durability.
Torque adjustment
Precision clutch for torque accuracy.
Precision IC board control.
(Beep Tone)
SPECIFICATIONS Model
Volt.
Drive Size
Screw Size
Torque Range
V
in
mm
N.m（ft-lb）
Free Weight Speed w/o Batt. rpm
kg
Application
lb
Vibration Value
Noise Level
m/s2
dB(A)
<2.5
<75
<2.5
<75
<2.5
<75
<2.5
<75
SC108BS3L
10.8
1/4” Hex. M3~M4 1~3.5 ( 0.7~2.6 ) 1,100
1.0
High speed for short cycle 2.2 times
SC108BS5B
10.8
1/4” Hex. M3~M5 1~5.5 ( 0.7~4.1 )
170
1.0
2.2 Special for hose clip
SC108BS8I
10.8
1/4” Hex. M4~M5
2~8 ( 1.5~5.9 )
800
1.0
SC108BS11F
10.8
1/4” Hex. M4~M6 3~11 ( 2.2~8.1 )
500
1.0
SC108BS12D 10.8
1/4” Hex. M4~M6
4~12 ( 3~9 )
300
1.0
2.2 Special for heavy soft joint
<2.5
<75
SC108BS12B 10.8
1/4” Hex. M4~M6
4~12 ( 3~9 )
170
1.0
2.2 Special for heavy soft joint
<2.5
<75
SC108BS12E 10.8
1/4” Hex. M3~M6 1.5~12 ( 1.1~9 )
470
1.0
<2.5
<75
SC108BS12Z 10.8
1/4” Hex. M3~M6 1.5~12 ( 1.1~9 )
380
1.0
<2.5
<75
Combination of speed and torque Combination of speed and 2.2 torque 2.2
Broad torque range and special for medium soft joint Broad torque range and 2.2 special for heavy soft joint 2.2
★ Adjustment screwdriver is included with the tool.
31
<WR series>
Industrial Cordless Tools
Cordless Shut-off Angle Wrench/Screwdriver WR series
( Brushless motor )
10.8V/14.4V High capacity 3.0 A.h Li-ion battery pack delivers longer run-time.
Ergonomical handle design provides a well-balance.
User can distinguish the torque at a glance of color.
LED light for working in dark area.
Press button for easy Forward/Reverse operation.
Trigger repeat protection avoid double hits on already seated screw.
The angled head allowing multiple head positions.
A green light tells the operator that the preset torque is reached and the tightening is OK. A red light and one long "beep" sound tell the operator that the preset torque is not reached,the screwing fastener must be performed again. A flashing yellow light and five short "beep" sounds give an early warning when it is time for recharging. A yellow light and one long "beep" sound mean a battery lock that indicates the tool cannot work and MUST change the battery pack immediately. LED indicator provides simple process information to the operator.
APPLICATIONS ● Assembly applications where torque accuracy is required. ● Areas where pneumatic or electric tools are impractical to use due to hoses/cables. ● Especially used in cramped spaces.
PRODUCT STRENGTHS ● The high performance brushless motor reduces the harm of environment and provides more fastening cycles per battery charge. ● To use innovative 3.0A.h Li-ion battery makes working time longer than Ni-Cad and Ni-MH batteries. ● Li-ion battery without memory effect so the battery life can be last longer. ● The common use 30 N.m tool is lighter and shorter than other brands , it makes the operation much easier and less fatigue. ● Torque accuracy : Meet ISO 5393 Cmk>2 at ±10% tolerance 32
R
R
<WR series>
Industrial Cordless Tools
Advanced brushless motor.
(Beep Tone)
Precision IC board control.
Precision clutch for torque accuracy.
Torque adjustment.
Precise alloy steel gear for high durability.
H (mm)
W (mm)
D (mm)
3/8" Sq.
39
12
16
1/4" Sq.
39
9
16
1/4" Hex.
39
20
16
455
Drive Type
SPECIFICATIONS Model
WR108BAS8I
114
Volt.
Drive Size
Screw Size
Torque Range
V
in
mm
N.m（ft-lb）
rpm
kg
M4~M5
2~8 ( 1.5~5.9 )
850
1.3 2.86
M5~M6
5~16 ( 3.7~11.8 )
330
1.3 2.86
Vibration Value
Noise Level
m/s2
dB(A)
High speed for short cycle times
2.63
<75
Combination of speed and torque
2.63
<75
2.55
<75
2.55
<75
Free Weight Speed w/o Batt.
Application
lb
10.8 1/4” Hex.
WR108B2AS8I
10.8
1/4” Sq.
WR108B3AS8I
10.8
3/8” Sq.
WR108BAS16D
10.8 1/4” Hex.
WR108B2AS16D 10.8
1/4” Sq.
WR108B3AS16D 10.8
3/8” Sq.
WR144B3AS30E 14.4
3/8” Sq.
M6~M8
8~30 ( 5.9~22.1 )
400
WR144B3AS30C 14.4
3/8” Sq.
M6~M8
8~30 ( 5.9~22.1 )
250
High torque and special for medium soft joint High torque and special 1.3 2.86 for heavy soft joint 1.3 2.86
★ Adjustment screwdriver , spanner , suspension bail , marking color ring are included with the tool.
33
<Accessories>
R
Industrial Cordless Tools
Accessories Li-ion Battery Pack
BB108BN-330 Part No. BB108BN-330 BB144BN-330 BB180BN-315 BB180BN-330
BB144BN-330 Description 10.8 V 3.0 A.h 14.4 V 3.0 A.h 18 V 1.5 A.h 18 V 3.0 A.h
B84192B
B84192B
Description Input:100~240 VAC Output:10.8~14.4 VDC for Ni-MH＆Li-ion Input:100~240 VAC Output:18~19.2 VDC for Ni-MH＆Li-ion
E86B-UL Weight 0.51 kg (1.12 lb)
0.51 kg (1.12 lb)
Marking color ring (suit to WR series)
000-4120R
000-4120W
Part No. 000-4120R 000-4120W 000-4120Y
000-4120Y Description Red White Yellow
Angle head ass'y (suit to WR series)
B42WR108B Part No. B42WR108B B42WR108B2 B42WR108B3
34
Charger Time 65 min. 65 min. 40 min. 65 min.
0.49 0.60 0.42 0.71
Weight kg (1.07 kg (1.32 kg (0.92 kg (1.56
lb) lb) lb) lb)
Power cord (for charger use)
B84B
B84B
BB180BN-330
Size（L × W × H） 93 × 78 × 70 mm 108 × 78 × 70 mm 93 × 78 × 70 mm 127 × 78 × 70 mm
Charger
Part No.
BB180BN-315
B42WR108B2
B42WR108B3 Description 1/4” Hex. 1/4” Sq. 3/8” Sq.
E86B-VD
E86B-AS
E86B-UK
Part No.
Description
Weight
E86B-UL
for USA region
62 g (0.13 lb)
E86B-VD
for Europe region
79 g (0.17 lb)
E86B-AS
for Australia region
105 g (0.23 lb)
E86B-UK
for England region
151 g (0.33 lb)
Marking color ring (suit to SCB series)
000-4121B
000-4121R
Part No. 000-4121B 000-4121R 000-4121W 000-4121Y
000-4121W
000-4121Y
Description Blue Red White Yellow
Angle head adapter (suit to WR series)
B55WR108B Part No. B55WR108B B55WR108B-1
B55WR108B-1 Description Length : 2” Length : 4”
R
<Accessories>
Industrial Cordless Tools
Programmer Setting the tool speed.
Shoulder strap
Part No. : B74SC180B ( suit to SCB series )
Part No. : D37SC108B-2 ( suit to SC series )
● Please see the instruction manual.
Adjustment screwdriver
Spanner Part No. : D34WR108B ( suit to WR series )
Part No. : D57SC108B-1 ( suit to all series )
Suspension bail To suspend the tool on a balancer. Part No. : D39WR108B-6 ( suit to WR series )
Part No. : D39SC180B-1 ( suit to SCB series )
Tool cover To avoid damaging the workpiece surface. Part No. : C16SC108B ( suit to SC series )
Part No. : C16SC180B ( suit to SCB series )
Part No. : C16WR108B ( suit to WR series )
35
Cordless 36