Manoskop 730

Manoskop® 730.

Extremely robust.

1 Mechanical 1 Deviation 1 Simple

torque wrench

of indication ± 4 %

to adjust and use

1 Positive

and detectable click even at the lowest of settings (double signals)

1 Measurement

ranges from 2-800 N m

Manoskop® 730.

Extremely robust.

Protected mechanism Extremely resistant to mechanical wear, protected against dirt inside the outer housing.

No need for manual reset to zero. Thanks to the wear-free triggering cam system. The measuring element is only under load while force is being applied.

Any force applied to the tool after the »click« or applied in the opposite direction to the current function – e.g. forcible loosening of a jammed screw – does not act on the trigger mechanism and cannot cause damage to it.

More sturdily handle Made of extremely tough, impact resistant plastic; resistant to oils, grease, fuels, brake fluids and Skydrol.

Rapid setting of the torque level at which the tool cuts out (sizes 2-65).

Easily readable double scale Twin scales for N m/ft.lb and N m/in.lb (sizes 5–80).

QuickRelease safety lock Firm locking and rapid change of insert tools (sizes 5–65) thanks to the QuickRelease safety lock.

-

The square drive enables a broad range of tightening tools (9x12 mm and 14x18 mm).

+

Rapid adjustment from outside, no disassembly of the torque wrench.

EDUARD WILLE GmbH & Co. KG Lindenallee 27 42349 Wuppertal Germany Phone +49 202 4791-0 Fax +49 202 4791-200 info@stahlwille.de www.stahlwille.de

91 97 91 08 Printed in Germany Copyright by EDUARD WILLE GmbH & Co. KG Wuppertal – 0,5/06/13 PAF