Rivets gesipa np by Joinmax

AccuBird

® Rechargeable 12 Volt Battery

Riveting Tool

CE-Conformity:

Machinery safety according to EEC Directive No. 98/37 EG

Working Range:

Blind Rivets up to 5 mm Ø in all materials. Bulb-tite ® Blind Rivets: 4,0; 5,2 and 6,3 mm Ø Alu and Steel.

Technical Data: Weight: Stroke: Operating voltage: Traction power:

2.2 kg (with Battery) 20 mm 12 V 8.500 N

Nosepieces/Accessories: Nosepieces: 17/24 (in working position) 17/27, 17/29, 17/32 (in magazine) AccuBird® and one 12 Volt Battery and one quick charger in case. Part-No. 725 0037

Special Accessory: Retaining Nosepiece Spring force

• Inserted rivet remains in any position • Rivets may be set with only one hand • Safer working

Retaining Nosepiece 17/18 R 17/24 R 17/27 R

Part- No. 725 4078 725 4086 725 4094

5 12,60 per piece

Retaining Nosepiece 17/29 R *17/32 R* *17/36 R*

AccuBird® and one 12 Volt Battery and one quick charger in cardboard box. Part-No. 725 0029

PartNo. 725 4108 725 4116 725 4124

® and one 12 Volt AccuBird Battery in cardboard box. Part-No. 725 0010

*also for PowerBird ®

Changeover set (part 50) for bulbtite ® rivets: Jaw pusher (part 54), jaws (part 55) and 3 nosepieces (see list) Part-No. 725 9290

Jaws (3 parts) for AccuBird®:

12 V Quick-Charger

Part-No. 7251613

Part-No. 725 1035

Nosepieces and performance per charge: Rivets/ Nosepiece charge

Rivet-Ø Material in mm

Technical Data: Power supply: Recharging time: Weight:

230 V AC / 50 Hz approx. 60 minutes 0,45 kg

Battery

12 V DC Part-No. 725 1092 1,7 Ah (NiCd)

Weight: 0,62 kg

2,4

Alu

1.900

17/18*

725 2075

3 and 3,2

Alu

1.300

17/24

725 1583

3 and 3,2

Steel

1.100

17/24

725 1583

3 and 3,2

Stainless Steel

1.000

17/24

725 1583

Alu

1.000

17/24

725 1583

Steel

900

17/27

725 2040

Stainless Steel

800

17/29

725 2059

4,8 and 5

Alu

700

17/29

725 2059

4,8 and 5

Steel

500

17/32

725 2067

4,8 and 5

Stainless Steel

400

17/36*

725 2083

Extended and special nosepieces available on request.

Power-Battery 12 V DC

2,0Ah(NiCd) Part-No. 725 1095

Part-No. 725 1030 * 3,2Ah(NiMH) available as special accessory

* Recharge only with charger P/N 725 1035 30

PartNo.

Rivets/ Nosepiece charge

Material Bulb-tite® Rivet-Ø in mm

PartNo.

Alu/Alu

1.000

17/26 BT*

725 2202

5,2

Alu/Alu 800

17/32 BT*

725 2210

6,3

Alu/Alu 600

17/42 BT*

725 2229

6,3

Steel/Steel 300

17/42 BT*

725 2229

* Available as special accessory..

PowerBird

® Rechargeable 12 Volt High Power

Working Range: Blind rivets from Ø 4.8 mm steel up to 6.4 mm all materials. Bulb-tite® blind rivets up to 7.7 mm, all materials. Mega Grip® blind rivets up to 6.4 mm, all materials.

CE-Conformity: Machinery safety according to EEC Directive No. 98/37 EG

Technical Data: Weight: Stroke: Operating Voltage Traction Power:

2.2 kg with battery 20 mm 12 V DC 13.000 N

Nosepieces/Accessories PowerBird® with one 12 V Power Battery, one quick-charger in case

Nosepieces: 17/32 in working position, 17/36, 17/40, 17/45 in magazine

Part-No. 724 0031

PowerBird® with spring loaded trigger system, one 12 V Power Battery, one quick-charger

12 V Quick-Charger Part-No. 725 1035

Part-No. 724 0160

Jaws (3 parts) for PowerBird®: Part-No. 7102208

Nosepieces and performance per charge:

Technical Data: Power Supply: Recharging Time: Weight:

230 V AC, 50 Hz Approx 60 min. 0,45 kg

Power Battery 12 V DC Part-No. 725 1095

2,0 Ah (NiCd)

Weight: 0,62 kg

Rivet- Ø Material mm 4,8 and 5,0 Steel 4,8 and 5,0 Stainless Steel 6,0 Alu 6,0 Steel 6,4 Alu/PG-Alu 6,4 Steel

Rivets/ Nosepiece charge 500 17/32 400 17/36 400 17/36 220 17/40 300 17/45 180 17/45

Part-No. 725 2067 725 2083 725 2083 725 2560 724 3065 724 3065

Bulb-tite® Blind Rivets 4,0 Alu/Alu 720 5,2 Alu/Alu 660 6,3 Alu/Alu 420 6,3 Steel/Steel 220 6,3 Monel/Stainl.Steel 270 7,7 Alu/Alu 340

17/26 BT* 17/32 BT* 17/42 BT* 17/42 BT* 17/42 BT* 17/48 BT* and set of Jaws

725 2202 725 2210 725 2229 725 2229 725 2229 725 2237 715 1527

17/31 MG* 17/41 MG* 17/31 MG* 17/41 MG* 17/31 MG* 17/41 MG*

725 2250 724 3146 725 2250 724 3146 725 2250 724 3146

Mega Grip® Blind Rivets

Power Battry 12 V DC

Part-No. 725 1030 * 3,2Ah(NiMH) available as special accessory

* Recharge only with charger P/N 725 1035

4,9 Alu/Alu 6,6 Alu/Alu 4,9 Steel/Steel 6,6 Steel/Steel 4,9 Inox/Inox 6,6 Inox/Inox * Available as special accessory.

430 300 300 100 300 100

Special nosepieces available on request ®

TAURUS-SERIES

PneumaticTAURUS 1

Part-No. 756 0001

Working Range: Blind Rivets up to 4 mm Ø Alu/Steel (max. mandrel Dia. 2,5 mm)

Technical Data: Weight: 1,3 kg Operating air pressure: 5 - 7 bar Air hose connection: 6 mm Ø (1/4’’) Air consumption: per cycle ca. 1,0 ltr. Traction Power: 4.200 N at 5 bar Stroke: 15 mm

TAURUS — Main features at a glance Powerful, efficient performance

• Tool range offering graduated pulling strength • High weight/performance ratio • Optimum stroke for fast and efficient working • The compressed air used in the setting process also ejects the spent mandrel (unique, worldwide !) • Innovative jaw control system substantially increases jaw lifetime Powerful, efficient performance

•Automatic rivet suction switch-on when lifting the tool • Padded, ergonomic tool grip • Removable spent mandrel container with built-in safety device against

ejected mandrels Air hose connection on the tool rear or right side for maximum freedom of movement Accommodation of interchangeable nosepieces in tool base Suspension loop fully retractable into tool body

•

Nosepieces/Accessories Nosepieces: 17/18 (in working position) 17/24, 17/27 (in tool bottom) Maintenance wrench SW12/14, SW14/17 1 oil bottle 100 ml 1 oil refill can Operating instructions with spare parts list

Jaws (3 parts): Complete TAURUS-Series Part-No. 756 1172

5Swivel 10,60air perconnector: set

Complete TAURUS-Series Part-No. 756 1023

• •

hydraulic Blind Rivet setting Tools TAURUS 2

TAURUS 3

TAURUS 4

Part-No. 757 0007

Part-No. 758 0002

Part-No. 759 0001

Working Range: Blind Rivets up to 5 mm Ø all materials and up to 6 mm Ø Alu/Steel (max. mandrel Dia. 3,2 mm)

Technical Data: Weight: 1,6 kg Operating air pressure: 5-7 bar Air hose connection: 6 mm Ø (1/4’’) Air consumption: per cycle ca. 2,3 ltr. Traction Power: 9.000 N at 5 bar Stroke: 18 mm

Nosepieces/Accessories Nosepieces: 17/27 (in working position) 17/29, 17/32, 17/36 (in tool bottom) Maintenance wrench SW12/14, SW14/17 1 oil bottle 100 ml

2,4 3,2 3 3 and 3,2 4 4 4 5 and 4,8 5 and 4,8 5 and 4,8 6 6 6,4 6,4 8

Working Range:

Working Range: Blind Rivets up to 6,4 mm Ø all materials (max. mandrel Dia. 4,5 mm)

Blind Rivets up to 6,4 mm Ø all materials and up to 8 mm Ø Alu (max. mandrel Dia. 4,5 mm)

Technical Data:

Technical Data: Weight: 1,9 kg Operating air pressure: 5-7 bar Air hose connection: 6 mm Ø (1/4’’) Air consumption: per cycle ca. 4,8 ltr. Traction Power: 14.000 N at 5 bar Stroke: 25 mm

Weight: 2,0 kg Operating air pressure: 5 - 7 bar Air hose connection: 6 mm Ø (1/4’’) Air consumption: per cycle ca. 4,8 ltr. Traction Power: 20.000 N at 5 bar Stroke: 19 mm

Nosepieces/Accessories

Nosepieces/Accessories Nosepieces: 17/36 (in working position) 17/40, 17/45 (in tool bottom) Maintenance wrench SW12/14, SW14/17 1 oil bottle 100 ml

Nosepieces: 17/36 (in working position) 17/40, 17/45 (in tool bottom) Maintenance wrench SW12/14, SW14/17 1 oil bottle 100 ml 1 oil refill can

Conversion kit for PH 2000-

Nosepieces: Rivet- Ø mm

Material Alu CAP-Alu, CAP-CU Alu/CU Alu, CU, Steel, Stainless Steel, Stinox, Alu/Alu, PG-Alu, PG-Steel Alu, CU, CAP-Alu, CAP-CU Steel, Alu/Alu, PG-Alu Stainless Steel, Stinox, PG-Steel Alu, CAP-Alu, CAP-CU, PG-Alu Steel, Alu/Alu Stainless Steel, Stinox, PG-Steel Alu Steel Alu Steel, Alu/Alu Alu

Nosepiece

Part-No.

5 per piece

17/18 17/18 17/20 17/24

725 2075 725 2075 725 2269 725 1583

2,80 2,80 2,80 2,80

17/24 17/27 17/29 17/29 17/32 17/36 17/36 17/40 17/40 17/45 17/45

725 1583 725 2040 725 2059 725 2059 725 2067 725 2083 725 2083 725 2560 725 2560 724 3065 724 3065

2,80 2,80 2,80 2,80 2,80 2,80 2,80 2,80 2,80 2,80 2,80

17/26 BT* 17/32 BT* 17/42 BT* 17/48 BT*

725 2202 725 2210 725 2229 725 2237

18,10 18,10 18,10 18,10

17/31 MG* 17/41 MG*

725 2250 724 3146

22,60 22,60

spent mandrel containe: (Description on page 34) for TAURUS 1 Part-No. 756 1104 for TAURUS 2-4 Part-No. 756 1107

CE -Conformity:

Machinery safety according to EEC Directive No.98/37 EG

BULB-TITE ® Blind Rivets 4 5,2 6,3 7,7

Alu/Alu Alu/Alu Alu/Alu,Steel/Steel,Monel/Stainl.Steel Alu/Alu

Mega Grip ® Blind Rivets 4,8 6,4

Alu/Alu,Steel/Steel,Stainless Steel Alu/Alu,Steel/Steel,Stainless Steel

* Available as a special accessory. Elongated nosepieces and further special nosepieces available on request. ®

TAURUS variants TAURUS with built-in spent mandrel container Non removable, sideways emptying spent mandrel container from PH 2000, particularly suited for extra-long mandrels from 50 up to 70 mm.

TAURUS with spring loaded trigger system This feature ensures that the materials of the riveting application will be pressed together before the rivet is installed, thus avoiding gaps in between. Moreover the operator will be certain that the rivet has reached its end position in the application and that the setting head is in contact with the upper side of the material before the riveting process is started.

TAURUS with rivet counter

The tool is equipped with a sensor which detects the evacuation of the 足broken mandrel after the setting process is complete. The sensor is installed just in front of the mandrel container and connected either to a local control and display unit GRivCount or to a centralized monitoring system via the line amplifier GRivAmp.

TAURUS with setting process monitoring

The setting process monitoring is achieved by a direct on-line analysis of 足traction force and traction course recorded during the setting of the rivet. All system components necessary for operation are included in the tool itself. The setting analysis takes less than 1 microsecond and its result is directly displayed by a green or red LED installed in the tool base and, optionally, by a warning tone. Moreover, a collective analysis of the complete work piece is also included. The tool stores more than 260.000 individual setting processes, which can be recalled at any time. The system also identifies failure patterns and memorizes those for failure analysis and troubleshooting. The tools can be operated as stand-alone or as part of integrated production systems. 速

Automatic Riveting Unit GAV TAURUS 1 (with built-in spent mandrel container) Part-No. 756 0005

TAURUS 2 (with built-in spent mandrel container) Part-No. 757 0018

Fully automatic Blind Riveting Unit for industrial applications

TAURUS 3 (with built-in spent mandrel container) Part-No. 758 0011

TAURUS 4 (with built-in spent mandrel container) Part-No. 759 0007

Prices on demand

CE-Conformity: Machinery safety according to EEC Directive No. 98/37 EG

TAURUS 1 (with spring loaded trigger system) Part-No. 756 0021

TAURUS 2 (with spring loaded trigger system) Part-No. 757 0016

GAV-8000

Part-No. 758 0005

with electronic operation control and setting process monitoring

TAURUS 4 (with spring loaded trigger system)

Part-No. 719 0008

TAURUS 3 (with spring loaded trigger system)

Part-No. 759 0002

TAURUS 1-4 (with rivet counter)

Working Range: Blind rivets from Ø 2,4 mm up to Ø 6,4 mm Alu,Copper and up to Ø 6 mm Steel, as well as Ø 5 mm Stainless Steel. Shaft length up to 30 mm

Main features: Main benefits: • Productivity increase: Approx. 50% time and cost saving compared with conventional blind riveting tools due to automatic loading of blind rivet into the gun’s working position. • No skilled staff required • High action radius through 4,5 m tubing between riveting gun and main unit • Capability of integration into full automatic production lines

Main advantages: • Permanent operation monitoring and display of the most important process steps • Integrated mandrel disposal through aspiration • Built-in interface for remote contro

New features compared with GAV 7000: TAURUS 1-4 (with setting process monitoring)

• Completely new electronic control • Integrated setting process control • Display of tool’s function and of process analysis in real time • Intuitive operation and settings over navigation and function keys • Simplified error detection and trouble-shooting

GAV-7000 electronic

Same scope of operation as GAV-8000, but without setting process monitoring function. Part-No. 719 0026

Power Tools CE -Conformity: Machinery safety according to EEC Directive No. 98/37 EG

PH 1

Part-No. 716 0011

PH 2

PH 2000

Part-No. 717 0017

Part-No. 715 0016

Working Range:

up to 4 mm Ø all materials Non-qualified for CAP Blind Rivets Stainl.Steel!

Technical Data:

Nosepieces/Accessories

Working Range:

Weight: (2.8 lbs) 1.3 kg Operating air pressure: (60-90 psi) 6 bar Air hose connection: (1/4’’) Ø 6 mm Air consumption: per cycle 1.2-1.8 ltr. (0.3 ltr. compr. air) Traction power: 7.375 N at 5 bar Stroke: (.590’’) 15 mm

Nosepieces/Accessories

Nosepieces: 16/24 (in working position) 16/18, 16/27, 16/29 (as accessory) 1 pair of jaws, 1 spent mandrel bottle, 1 maintenance wrench each MSU and MSZ Maintenance instructions and spare parts list

PH 1

Part-No. 705 2057

PH 1-L

Part-No. 716 0119

from 3 up to 5 mm Ø all materials — 2,4 mm Ø with Special Jaw Assembly (p.38) Non-qualified for CAP Blind Rivets Stainl.Steel!

Technical Data:

Weight: (2.6 lbs) 1.2 kg Operating air pressure: (60-90 psi) 6 bar Air hose connection: (1/4’’) Ø 6 mm Air consumption: per cycle 0.8-1.2 ltr. (0.2 ltr. compr. air) Traction power: 5.200 N at 5 bar Stroke: (.590’’) 15 mm

Jaws (2 parts):

Nosepieces: 16/32 (in working position) 16/24, 16/27, 16/29, 16/36 (as accessory) 1 set of jaws, 1 spent mandrel bottle, 1 maintenance wrench each MSU and MSZ Maintenance instructions and spare parts list

Jaws (3 parts):

PH 2, PH 2000

Part-No. 710 2151 t

L: Version with reduced weight,

Mandrel Absorption System and overcoated with plastic.

from 3,0 up to 6,4 mm Ø all materials — 2,4 mm Ø with Special Jaw Assembly (p.38)

Technical Data: Weight: (4.1 lbs) 1.9 kg Operating air pressure: (75-115 psi) 6 bar Air hose connection: (1/4’’) Ø 6 mm Air consumption: per cycle 2.8 - 3.6 ltr. (0.6 ltr. compr. air) Traction power: 10.000 N at 5 bar Stroke: (.866’’) 22 mm

Nosepieces/Accessories Nosepieces: 16/32 (in working position) 16/24, 16/27, 16/29, 16/36, 16/40 16/45 (as accessory) 1 set of jaws, 1 air deflector (no. 896) 1 maintenance wrench MSU

VAS (Vacuum

Absorption System)

Working Range: 3,2 mm Ø all materials, 4 mm Ø Alu and Copper Standard as well as PolyGrip® — 2,4 up to 3,0 mm Ø with conversion kit (p.38)

Nosepieces/Accessories Technical Data Weight: (2.6 lbs) 1,18 kg* Operating air pressure: (60-90 psi) 4-6 bar Air hose connection (1/4’’) 6 mm Ø Air consumption: 2-3 ltr. per cycle (with VAS) Traction power: 3.660 N at 5 bar Stroke: (.630’’) 16 mm

Nosepieces: 10/24 (in working position) 10/18, 10/27 (as accessory) 1 set of jaws,1 maintenance wrench MSZ 1 Nosepiece maintenance wrench Maintenance instructions and spare parts list

(Description on page 38) PH 1 equipped with VAS Part-No. 716 0070 PH 2 equipped with VAS Part-No. 717 0033

Jaws (2 parts): Part-No. 716 1069

Power Tools CE -Conformity: Machinery safety according to EEC Directive No. 98/37 EG

PH 2000-BT

(for BULB- tite® only)

Part-No. 715 0040

PH 2-VK

Part-No. 717 0068

PH-Axial Part-No. 770 0008

Working Range: up to 7,7 mm Ø all materials

Technical Data: See PH 2000

Working Range:

Nosepieces/Accessories

up to 4 mm Ø Alu, Steel and Copper

Technical Data:

Nosepieces: 16/32 BT (in working position) 16/26 BT, 16/42 BT, 16/48 BT (as accessory) 1 nozzle tube no. 8080 a (built-in) 1 nozzle tube no. 8080 b (as accessory) 1 maintenance wrench MSU 1 ball headed screw driver SW 2,5 1 oil refill can with hydraulic oil 1 air deflector (no. 896) Maintenance instructions and spare parts list

Jaws (3 parts):

Weight: (2.8 lbs) 1.3 kg Operating air pressure: (90 psi) 6 bar Air hose connection: (1/4’’) Ø 6 mm Air consumption: per cycle 1.2-1.8 ltr. (0.3 ltr. compr. air) Traction power: 5.200 N at 5 bar Stroke: (.550’’) 14 mm

from 4 up to 5 mm Ø Steel — 2,4 -3,2 mm Ø with Special Jaw Assembly (p.38)

Nosepieces/Accessories

PH 2000 BT

Part-No. 715 1527

Nosepieces:10/24(in working position),10/18, 10/27(as accessory),1spent mandrel container,1maintenance wrench each MSU and MSZ, maintenance instructions and spare parts list VK: Shortened head for riveting in places of difficult access

Jaws (3 parts):

PH 2 -VK

Part-No. 705 2057 Rivet-Ø

Rivet Material

PH 1

PH 2

PH 1-L

PH 2-VK

PH-Axial

PH 2000 PH 2000-BT

2,4

Alu

16/18

10/18*

10/18•

10/18

10/18*

—

3,2

CAP-Alu, CAP-Cu

16/18

10/18*

10/18•

10/18

10/18*

—

Alu, Cu, Steel, Stainless Steel, Stinox 3 and 3,2 Alu/Alu, PG-Alu, PG-Steel

16/24

10/24*

• 10/24

10/24

10/24*

—

Alu, Cu, CAP-Alu, CAP-Cu

16/24

16/24*

10/24•

10/24

16/24*

—

PG-Alu, Steel, Alu/Alu

16/27

16/27*

10/27•

10/27

16/27*

—

Stainless Steel, Stinox, PG-Steel

16/29

16/29*

—

16/29*

—

5 and 4,8 Alu, CAP-Alu, CAP-Cu, PG-Alu

—

16/29*

—

16/29*

—

5 and 4,8 Steel, Alu/Alu

—

16/32*

—

16/32*

—

5 and 4,8 Stainless Steel, Stinox, PG-Steel

—

16/36*

—

16/36*

—

Alu

—

16/36*

—

Steel

—

16/40*

—

6,4

Alu, PG-Alu

—

16/40*

—

6,4

Steel, Alu/Alu

—

16/45*

—

Plastic

—

16/30K

—

Plastic

—

16/35K

—

Plastic

—

16/40K

— —

4,8

all MEGA GRIP®

—

16/31MG**

6,4

all MEGA GRIP®

—

16/41MG**

—

all BULB-TITE®

—

16/26BT

5,2

all BULB-TITE®

—

16/32BT

6,3

all BULB-TITE®

—

16/42BT

7,7

all BULB-TITE®

—

16/48BT

• = only PG-Alu

Technical Data: Weight: (4 lbs) 1.8 kg Operating air pressure: (95 psi) 6 bar Air hose connection: (1/4’’) Ø 6 mm Air consumption: per cycle 1.2 -1.8 ltr. (0.3 ltr. compr. air) Traction power: 7.375 N at 5 bar Stroke: (.590’’) 15 mm

Nosepieces/Accessories

Nosepieces for Power Tools:

* Special Jaw Assembly for small rivet diameters required (see page 38)

Working Range:

Nosepieces: 16/32 (in working position) 16/24, 16/27, 16/29 (as accessory) Jaw pusher with reducing tube no. 125 for 4 mm Ø rivets in alu and copper Ejection tube with socket for spent mandrels Maintenance instructions and spare parts list

Jaws (3 parts):

PH-Axial

Part-No. 710 2151

** Changeover set necessary (715 9714)

Part N° for Nosepieces: Nosepiece

Part-No.

Nosepiece

Part-No.

Nosepiece

Part-No.

Nosepiece

Part-No.

Nosepiece

Part-No.

10/18

705 1182

16/18

717 1196

16/30 K

714 1300

16/31 MG

717 9669

16/26 BT

717 1471

10/24

705 1247

16/41 MG

717 9677

16/24

717 1234

16/35 K

714 1351

16/32 BT

717 1498

16/27

717 1277

16/40 K

714 1408

16/42 BT

717 1501

16/48 BT

717 1528

16/29

717 1293

16/32

717 1323

16/36

717 1366

16/40

717 1390

16/45

717 1455

5 per piece

2,70

Special Accessories for Blind Riveting Tools VAS

Part-No. 728 0017

Vacuum Absorption system: TVAS for PH 1 and PH 2 This device absorbs the spent mandrel after the riveting operation and transports it automatically into the mandrel container. A further advantage is offered when the rivet, inserted into the nosepiece, is held in the jaw mechanism even if the tool head is in the vertical position. The vacuum absorption device is available as a complete built-in unit and can also be retrofitted to existing GESIPA Riveting Power Tools at any time.

with reduced head diameter (20 mm) and 2 part jaw assembly

Working Range: up to 4 mm Ø Stainless Steel and 5 mm Ø Alu

Type 198 (PH 1, PH 2): Part-No. 717 1986

Weight of unit: Operating air pressure:

Part-No. 715 8971

430 g 4-6 bar

Type 298 (PH Axial):

Equipment/Accessories:

The Universal nosepiece replaces five nosepiece sizes. The integrated rotary star in the steel sleeve can be unlocked easily without tools in order to select the appropriate size of nosepiece.

Working Range: from 2,4 to 5 mm Ø Alu, Copper and Steel, and 4 mm Ø Stainless Steel.

Standard: Nosepiece 10/24 (on request available with nosepiece 10/18, 10/27, 10/29, 10/32)

for setting rivets in deep positions and with difficult access for PH 1, PH 2 Part-No. 717 1641 (100mm)

Part-No. 99 (with 2 parts jaws)

Part-No. 704 0016

Part-No. 199 (with 3 parts jaws)

for PH 2000 Part-No. 715 9994 (100mm)

Part-No. 704 0024

for AccuBird® Part-No. 725 2293 (100mm)

Part-No. 105.1 Jaw pusher Part-No. 716 6338 Part-No. 106.1 Nozzle tube Part-No. 716 6346

By turning the rotary star select required nosepiece and release the trigger, which automatically locks the rotary star.

Extension Units

for setting rivets in places with difficult access and in corners.

Conversion kit PH 1-L for blind rivets 2,4 up to 3,0 mm Ø

Operate the tool and hold the trigger, then push back adjusting ring to end position.

Accessories:

Angle Head for PH 1, PH 2

Operation:

Part-No. 770 2981

1 Air deflector (Part-No. 896) 1 wrench MSU Maintenance instructions and spare parts list

Universal Nosepiece for Blind Riveting Tools HN 2, PH1, PH 2, PH 2000 and AccuBird ®

Type 898 (PH 2000):

Technical Data:

Special Jaw Assembly for small rivet diameters for PH1, PH 2, PH 2000 and PH Axial

for PowerBird® Part-No. 724 3278 (100mm) for TAURUS 1 Part-No. 756 2013 (50mm) Part-No. 756 2015 (100mm)

Rotary star Special steel sleeve

Adjusting ring

Sealing ring

The Universal nosepiece consists of: special steel sleeve, adjusting ring complete, rotary star and sealing ring. For HN 2, PH 1, PH 2, PH 2-KA and PH 2000 Universal-Nosepiece — 16 Part-No. 717 1188 For AccuBird® Universal-Nosepiece — 17 Part-No. 725 1637

for TAURUS 2 Part-No. 757 1016 (50mm) Part-No. 757 1019 (100mm) for TAURUS 3 and 4 Part-No. 758 1021 (50mm) Part-No. 758 1023 (100mm)

Blind Rivet Nut Hand Tools GBM 10

GBM 20

GBM 10 — M 5

Part-No. 720 0013

GBM 20 — M5

Part-No. 721 0019

GBM 10 — M 4 GBM 10 — M 6

Part-No. 720 0056 Part-No. 720 0064

GBM 20 — M4 GBM 20 — M6

Part-No. 721 0027 Part-No. 721 0035

Working Range:

Technical Data: Weight: Overall length:

from M 3* up to M 6 Alu and up to M 5 Steel, Brass und Stainless Steel

Accessories:

Weight: Overall length:

GBM 30 — M6

Part-No. 722 0014

GBM 30 — M5 Part-No. 722 0022 GBM 30 — M8 Part-No. 722 0030 GBM 30 — M10 Part-No. 722 0049

from M 3* up to M 10 Alu and Steel Up to M8 Brass and Stainless Steel

Technical Data:

Technical Data: (1.3 lbs) 600 g (101/4’’) 260 mm

Working Range:

from M 3* up to M 6 Alu and up to M 5 Steel, Brass and Stainless Steel

GBM 30

(2 lbs) 900 g (14.2’’) 360 mm

Accessories:

Weight: Length:

(4 lbs) 1.8 kg (18.5’’) 470 mm

Accessories:

Standard: Threaded mandrel and nosepiece M 5 (by choice also with M 4 or M 6) Maintenance instructions with spare parts list

Standard: Threaded mandrel and nosepiece M 6 (by choice also with M 5, M 8 or M 10) Maintenance instructions with spare parts list Stroke chart

Threaded mandrels & Nosepieces:

Article

Part-No.

Article

Part-No.

Article

Threaded Mandrel M4 Threaded Mandrel M5 Threaded Mandrel M6 Nosepiece M4 Nosepiece M5 Nosepiece M6

720 2407 720 2504 720 2601 720 2415 720 2512 720 2628

Threaded Mandrel M3 Threaded Mandrel M4 Threaded Mandrel M5 Threaded Mandrel M6 Nosepiece M3 Nosepiece M4 Nosepiece M5 Nosepiece M6

721 2305 721 2402 721 2496 721 2607 721 2313 721 2410 721 2518 721 2615

Threaded Mandrel M5 Threaded Mandrel M6 Threaded Mandrel M8 Threaded Mandrel M10 Nosepiece M5 Nosepiece M6 Nosepiece M8 Nosepiece M10

Part-No. 722 722 722 722 722 722 722 722

2505 2602 2807 2904 2513 2610 2815 2912

*M3 threaded mandrel and nosepiece (also M4 for GBM30) available as special accessories!

FireBird

® Battery Operated

Blind Rivet Nut Tool CE-Conformity:

Machinery safety according to EEC Directive No. 98/37 EG

Working Range: Up to M 10 alu, M 8 steel and up to M 6 Stainless Steel

Nosepieces/Accessories: Threaded mandrel and nosepiece M 6 (in working position) 1 hexagonal wrench Threaded mandrels and nosepieces M 4 and M 5 (in magazine)

Technical Data: Weight: Traction power: Operating voltage:

2.3 kg (with battery) 13.000 N 12 V DC

12 V Quick-Charger Part-No. 725 1035

FireBird® and one 12 V DC Battery and one quick charger — in case.

Technical Data: Power supply: Recharging time: Weight:

Part-No. 726 0032

230 V AC / 50 Hz approx. 60 minutes 0,45 kg

Battery

Part-No. 725 1092

Performance / threaded mandrels and nosepieces for FireBird®:

12 V DC 1,7 Ah (NiCd)

Weight: 0,62 kg

Power-Battery 12 V DC

2,0Ah(NiCd) Part-No. 725 1095 3,2Ah(NiMH) Part-No. 725 1030 * available as special accessory Recharge only with charger P/N 725 1035

Blind rivet nut inner thread

Material

approx. Rivet nuts/ charge

M 3

Alu

600

M 3

Steel/Stainl.Steel

550

M 4

Alu

520

M 4

Steel/Stainl.Steel

480

M 5

Alu

480

M 5

Steel/Stainl.Steel

400

M 6

Alu

400

M 6

Steel/Stainl.Steel

300

M 8

Alu

340

M 8

Steel

180

M 10

Alu

300

Threaded mandrel

Part-No.

Nosepiece

726 2019*

726 2086*

726 2027*

726 2094*

726 2035*

726 2108*

726 2043*

726 2116*

726 2051*

726 2124*

726 2078*

726 2132*

* Available as special accessory. ®

GBM 95

Power Tool for Blind Rivet Nuts

Working Range: from M 3 to M 10 all materials

Technical Data: Weight: (5.1 lbs) 2.3 kg Operating air pressure: (90 psi) 6 bar Air connection: (1/4’’) Ø 6 mm Air consumption: per cycle approx. 8 ltr. Trac(1.600 kp) 15.700 N tion power:

CE-Conformity: Machinery safety according to EEC Directive No. 98/37 EG

Accessories:

GBM 95

1 maintenance wrench MSU 1 hexagon screw driver SW 4 1 hexagon ball-end driver SW 2,5 1 assembly rod 1 pin spanner Ø 42 1 oil refill can with hydraulic oil

GBM 95 — M6 Part-No. 727 0143 GBM GBM GBM GBM GBM

Standard: Threaded mandrel and nosepiece M 6 (by choice also with M 3, M 4, M 5, M 8 or M 10) Maintenance instructions with spare parts list Stroke chart

Threaded mandrels: Article Threaded Mandrel M3 Threaded Mandrel M4 Threaded Mandrel M5 Threaded Mandrel M6 Threaded Mandrel M8 Threaded Mandrel M10

Part-No. 727 727 727 727 727 727

9108 9116 9124 9132 9140 9159

95 — M3 Part-No. 95 — M4 Part-No. 95 — M5 Part-No. 95 — M8 Part-No. 95 — M10 Part-No.

727 727 727 727 727

0208 0194 0186 0178 0151

Nosepieces: Article Nosepiece M3 Nosepiece M4 Nosepiece M5 Nosepiece M6 Nosepiece M8 Nosepiece M10

Part-No. 727 727 727 727 727 727

9167 9175 9183 9191 9205 9213

Blind Rivet Nut Kit Contents: 1 GBM 10 tool with threaded mandrel and nosepiece M 5 and additional threaded mandrels and nosepieces M 4 and M 6. Blind rivet nuts of assorted sizes M 4 to M 6 in Alu for grip ranges 0,25 up to 3 mm. Part-No. 753 0013

Do-It-Yourself Program Hand Riveter NTS Part-No. 703 0029

Mini-Pack Blind Rivets

Blind Rivet Nut Tool GBM 5 Part-No. 723 0028

18 of the most popular blind rivet sizes in Alu/Steel, Steel/Steel and Copper/ Bronze in attractive boxes.

For easy operation. Slim design of tool body for setting rivets in narrow places, self opening spring for automatic mandrel ejection.

Easy stroke adjustment. Quick exchange of threaded mandrel.

Mini-Pack Rivets are supplied in a cardboard box with 10 boxes each.* Alu/Steel Rivet body

Nietboy

Part-No. 755 0014

The handyman’s riveting kit including NTS Hand Riveter and a selection of 100 rivets, washers and a drill.

Blind Rivet AssortPart-No. 639 1109

Contents: 100 blind rivets in Alu/Steel: 4 mm Ø x 6, x 8, x 12.

Service-Pack

Grip

Part-No.

Pcs.

Length

Range

per

Pack

1—3

630 4206

100

3—6

630 4214

100

6—9

630 4222

100

1—3

630 4230

100

3—6

630 4249

100

6—9

630 4257

100

1—3

630 4265

3—6

630 4273

6—9

630 4281

50 Grip

Part-

Part-No.

Pcs.

Range

No.

per

Steel/Steel Rivet body

Range

Length

1—3

631 3108

100

3—6

631 3116

100

6—9

631 3124

100

1—3

631 3132

100

3—6

631 3140

100

6—9

631 3159

100

Part-No.

Pcs.

Pack

Copper/Bronze Grip

Length

Range

per

Pack

1—3

635 3010

3—6

635 3029

6—9

635 3037

Description

0,25 — 3,0

639 4000

M 4 medium

2,5 — 4,5

639 4019

M 5 short

0,25 — 3,0

639 4027

M 5 medium

2,5 — 5,0

639 4035

M 6 short

0,25 — 3,5

639 4043

M 6 medium

3,0 — 5,5

639 4051

20 pieces

M 4 short

20 pieces 15 pieces 15 pieces 8 pieces 7 pieces

Blind Rivet Nut Assortment

Part-No. 639 4094 Contents: 1 threaded mandrel M 4 and M 5 each for GBM and 16 each of rivet nuts M 4 and M 5 short and medium.

PolyGrip Alu/Steel

Part-No. 639 2016

Contents: 50 pcs. each of washers 3,1 and 4,1 mm Ø and 1 each of drills 3,1 und 4,1 mm Ø.

Rivet body

Grip

Part-No.

Pcs.

Length

Range

per

Pack

3,2

0,5 — 5

670 4073

100

3,2

3—8

670 4080

100

0,5—6,5 670 4090

100

4,8 4,8

PolyGrip Alu/Steel Large Flange K16 Rivet body

Grip

Part No.

Pcs.

Length

Range

per

Pack

670 4100

0,5—6,5 670 4110

4,8

0,5—6,5 670 4130

6,5 — 13 670 4120

4,8

6,5—13

670 4140

7 — 13

* Only available in full cardboard boxes

GBM-Mini-Pack Blind Rivet Nuts in Alu on blister card.

Contents Grip

Rivet body

Mini-Pack Blind Rivet Nuts

PunchBird

Electro-mechanical punching tool battery powered — high performance

Working Range:

Ø 22 mm: max. 2,0 mm steel sheet metal or 1,5 mm stainless steel Ø 35 mm: max. 1,5 mm steel sheet metal or 1,0 mm stainless steel

CE-Conformity:

Technical Data: Traction force: 13 kN Weight: 2,4 kg with battery Power source: DC Motor 12 V Punching time: approx.18 sec. per hole approx. 250 Holes per charge:

Machinery safety according to EEC Directive No. 98/37 EG

Equipment/Accessories PunchBird with one 12 Volt Power Battery and one quick charger in case

Power Battery 12 V DC/2,0Ah (NiCd) Quick-Charger Drill Ø 11 mm Metal case

Part-No. 771 0001 5 995,00

2 Adapter for available punching blocks (UNF 3/8 - 24 and M10 x 1)

12 V Quick-Charger

Part-No. 725 1035

Range of punching blocks

Battery powered tool for fast punching of holes in sheet metal

Technical Data: Power Supply: Recharging Time: Weight:

Use of a completely new jaw and traction mechanism allows to reduce by more than half the operation time compared with other tools available on the market.

230 V AC, 50 Hz Approx 60 min. 0,45 kg

Further advantages:

Power Battery 12 V DC Part-No. 725 1095 Weight: 0,62 kg

2,0 Ah (NiCd)

Power Battry 12 V DC

Part-No. 725 1030 * 3,2Ah(NiMH) available as special accessory

• Easy operation — No exchange of traction rod necessary on the punching Punching Blocks Accessories Punching block Ø Punching block Ø Punching block Ø Punching block Ø Punching block Ø Punching block Ø Punching block Ø Punching block Ø Punching block Ø

15,2 16,0 18,6 20,4 22,5 25,5 28,3 32,0 35,0

mm (compl.) mm (compl.) mm (compl.) mm (compl.) mm (compl.) mm (compl.) mm (compl.) mm (compl.) mm (compl.)

Part-No. 771 771 771 771 771 771 771 771 771

0002 0003 0004 0005 0006 0010 0007 0008 0009

* Recharge only with charger 725 1035 ®