Sensotork® 713R. The most precise of all.
1 Electronic
indicating torque/angle wrench (Type I)
1 Angle
measurement without reference arm, can be ratcheted
1 Advance
warning points via visual, tactile and aural signals
1 Large
easy read display for both text and numbers
1 Accurate
to ± 1 % or 2°
Sensotork® 713R. The most precise of all.
The square drive
Easy extension setting
Amazingly simple handling
Warning signals
enables a broad range of
Where the insert tool
All functions are selected
Can be selected as either
tightening tools (9x12 mm
requires an extension
using the arrow keys.
acoustic (buzzer), tactile
and 14x18 mm).
adjustment, simply enter
The visual guidance system
(vibration in the handle),
the new value.
makes operation a simple
visual (LEDs and display) or
Recalculation using
matter (e.g. »Defined
a combination of these. The
complicated formulae is
sequence«).
point at which the warning signal is triggered can be
no longer necessary.
freely set.
QuickRelease safety lock
Angle measurement
Measurements independent
Data output
Firm locking and rapid change
without reference arm,
of the point of application
The port allows all data
of insert tools thanks to the
can be ratcheted
of force
stored in the wrench to be
QuickRelease safety lock.
Angle-controlled
The reading will always be
output to a PC for detailed
measurements using the
accurate, irrespective of
evaluation (USB).
Sensotork® 713R do not
where you grip the torque
require a reference arm.
wrench (sizes 6 and 20).
Benefits at a glance 1 Angle
measurement without reference arm, can be ratcheted
1 Broad
measuring range (5 % – 100 % of rated value)
1 Extremely 1 Units
1 Clockwise 1 Large
and anticlockwise use
easy readable display for both text and numbers
1 Advance 1 For
wide range of angle measurement
of measurement N m / ft.lb / in.lb
warning points via visual, tactile and aural signals
use with all insert tools 9x12 mm and 14x18 mm
1 QuickSelect
rapid recall of predefind sets of operating
parameters 1 User
programmable interface: both at the wrench or
via software 1 Defined
sequence: A number of repeated joints can be
grouped as a defined sequence 1 Readings
can either be directly stored, transmitted to the
PC or simply displayed 1 Password 1 Freely
protection tamper proof use
selectable names for each series of test
1 Various
languages available
1 Works-specific 1 Resistant 1 Wide
identifier
to oils, grease, fuels, brake fluids and Skydrol
range of application: –20°C to +60°C
1 Meets
requirements of DKD-R 3-7, Class 2
1 Accurate
to ± 1 % or 2°
EDUARD WILLE GmbH & Co. KG Lindenallee 27 42349 Wuppertal Germany Phone +49 202 4791-0 Fax +49 202 4791-200 info@stahlwille.de www.stahlwille.de
91 97 91 10 Printed in Germany Copyright by EDUARD WILLE GmbH & Co. KG Wuppertal – 0,5/06/13 PAF