Stahwille catalogue by Joinmax

www.stahlwille.de P.O.Box 12 01 03 42331 Wuppertal Germany Tel.: +49 202 4791-0 Fax: +49 202 4791-355 export@stahlwille.de www.stahlwille.de

Programme 2012

EDUARD WILLE GmbH & Co. KG

Programme 2012

Key to success

This claim is central to STAHLWILLE‘s message.

the forging blank through to the finished product,

Literally. It is the commitment we make to our

in our own production facilities. We place

customers.

emphasis on ecological compatibility and protection of our environment.

In making this claim, STAHLWILLE focuses on the benefit to the customer because we want

Contributing to efficient business success using

them to be able to use tried-and-tested, perfect

high-grade tools, guaranteeing reliability and

tools, every time. Tools that are more durable,

accuracy, maintaining close proximity to the

stronger – and, as a result, more economical.

customer – this is only possible by applying decades of experience, human candidness and

By the way: STAHLWILLE products are exclu-

confidence in each other.

sively made in German production facilities. We hope you will take our slogan „Key to Our entire range of tightening tools is manu-

success“ the way it is meant: more than just an

factured throughout the production process, from

advertising slogan, a lot more …

Tool trolleys, Tool boxes, Sets

Page 10-62

Spanners

Page 64-83

Sockets, Socket sets, Accessories for manual drives

Page 86-139

IMPACT sockets, Accessories, machine actuated

Page 142-154

Torque tools, Torque testers

Page 156-196

Screwdrivers

Page 198-212

Pliers

Page 214-241

Pipe cutters, Hammers, Chisels, Files, Miscellaneous tools

Page 244-259

Pullers

Page 262-267

Special automotive tools

Page 270-311

125

532G Ratchet

125

512G Ratchet

Encapsulated housing

minimises the ingress of dirt.

177

25aSP Spline drive ratchet ring spanners

13214 Line maintenance set, metric sizes, in tool box No 13216/4

287

2501N TCS New workshop set for BMW motorbikes (consisting of 9 TCS sets)

96832622

96832099

96832095

96832100 96832096

258

256

2 4

96832097

96832101

96832098

96832102

12966 Wire stripping knife with hooked blade

12322 Tungsten carbide scribing iron

735/65 Ratchet insert tool

1 High precision crimping Easy-action force transmission

247

231

6637 Crimping pliers

231

6640 Crimping pliers

231

6638 Crimping pliers

232

6641 Crimping pliers

231

6639 Crimping pliers

Simple handling

232

165N Double flaring tool, new design

247

150

1204/21-1 BITS box (Phillips®, Internal hex, TORX®, POZIDRIV®)

150

6966 Stripping and cutting tool for use with crimping pliers

158-26 Plastic pipe shears

158-35 Plastic pipe shears

158-42 Plastic pipe shears

1204/21-2 BITS box (Phillips®, Slotted, TORX®, Internal hex, TORQ-SET®)

STAHLWILLE tools are known in over

The result is more than the sum of its parts: carefully

100 countries of the world. Not only that, they

crafted designs, high-grade materials, sophisticated

enjoy an excellent reputation, after all, customers

workmanship and dependable quality.

from the fields of energy generation, aerospace, transport, industry and the trades put their confidence in solid quality, forged and finished exclusively in German locations.

4 6

STAHLWILLE handtools are designed on the basis that they are an extension to your hand. This is how intelligent designs that can deal with considerable loads, provide easy and safe handling and a high degree of reliability is created. Special forging techniques give the already high-grade steel the ideal molecular structure. STAHLWILLEâ&#x20AC;&#x2DC;s rounded finish gives the smooth finishing touches to the tool surface making it skin-friendly and easy to hold.

STAHLWILLE tools are to be found in many

Tools for the energy generating industry require

fields. In energy generation, in transport, in

attention to complex ideas in other dimensions.

aerospace and in industry. In fact, wherever

For years, STAHLWILLE has had an excellent

safety, accuracy and speed are required.

reputation among experts both at home and abroad. They understand that safety and ease

For example, STAHLWILLE develops

of use are guaranteed.

high-grade tools and sets of tools â&#x20AC;&#x201C; including

6 8

High Performance Quality, for use on aero-

In the field of transport, STAHLWILLE develops

planes, e.g. for use with Hi-Lok bolts and the

complete kits of special-purpose tools together

Tool Control System (awarded the Aerospace

with leading vehicle manufacturers â&#x20AC;&#x201C;

Industry Award).

guarantees for mobility worldwide.

In motorsports as well – a field that has always been a test bed for new ideas – STAHLWILLE has a long tradition of professional involvement. Whether it is in Formula One, the Superbike world championships or the 24-hour Nürburgring races: As technical sponsors, we and our tools are at the very heart of the action – gathering valuable ideas to assist in the further development and design of our tools. Having said all that, it is quite logical that STAHLWILLE‘s quality assurance system is certified in accordance with DIN EN ISO 9001, isn‘t it?

1862 Company founded by Eduard Wille 1899 The company traditions are carried on by

Emil and Eduard Wille, the sons of the

owner.

and a further 25 trainees/apprentices.

Approx. 80% of all products made are

exported, mainly to European countries.

1938 The company is taken on by the grand-

children of the founder. STAHLWILLE now

employs approx. 400 employees.

1955 The family business expands moderately.

8 10

The multilingual catalogue contains

around 3,000 different tools.

Today, the company is still a family-owned

1914 The Wille brothers now employ 500 staff

business with more than 500

employees. Management is by Managing

Directors who are independent of the

family, checks and controls exercised

by an advisory board.

Exports are distributed worldwide to

over 100 countries through our own

distributor companies.

Three different production locations, all

in Germany.

The system and its components The CONVERTA system and its components are

mechanism prevents more than one drawer being

a modular system. The system consists of wheely

opened at any one time.

boxes with drawers or up-and-over doors, magazines with integrated carrying handles,

All the boxes can be fitted with a cylinder lock to

magazine drawers and magazines and a set of

enable central locking. The boxes can still be

wheels, and detachable spray-can holders.

locked even if one or more magazines or drawers

Thanks to the possibility of combining the many

have been removed.

modules available, there are almost no limits to the options open to the user in optimising his or her

All painted parts have an environmentally friendly

individual tool-storage environment.

powdercoat. The worktops of the cases are fitted with an oil and skydrol resistant plastic mat with

All the magazines are positioned on flat magazine

compartments for small components.

drawers which can be locked in place when extended. The tool magazines and standard

The undersides of the magazines have non-slip

drawers are interchangeable. A safety

film attached to them.

920 + R 920 10

920 + 922N

920 + 97N/7R

CONVERTA

Accessories CONVERTA

The modular components system in the aerospace industry (maintenance), in industry, the trades and all service work in the field for maintenance and assembly jobs x x x x

x x x x x x x x

Fully mobile for use anywhere. Multitalented – numerous combination options. Wheel it – or carry it. Interchangeable drawers and a range of magazines. Magazines are placed on flat drawers and can be opened easily when the drawer is pulled out. The undersides are coated with non-slip, Skydrol and oil resistant rubber. The magazine drawers can easily be exchanged for normal drawers (as with the Tool trolleys and Tool boxes in the full range). Topple-proof because only one drawer can be opened at any one time. Drawers designed to match the STAHLWILLE inlay system. Can be completely locked using the laterally-mounted cylinder lock (central locking). Hanging option for spray-can holders. Tough worktop made of plastic, oil and Skydrol resistant with compartments for screws, nuts etc. Can be combined with Tool trolley No 97. All painted parts have an environmentally friendly powdercoat.

920

Coated with environmentally friendly silver-coloured textured powder-coat. For mounting tool magazines No 920 C.

‘

Code

R kg

€

2.64

58.50

‘

81 48 10 00 ‘

920 C

Tool magazines

Coated with environmentally friendly silver-coloured textured powder-coat. For use with magazine drawers No 920 C-SCH.

Magazine case

with 5 drawers and 5 magazines. Converts to tool trolley with undercarriage No R 920. Features two removable spray can holders on the end pieces of the case and two integrated lifting handles. Drawers for mounting magazines are removable and lockable in fully extended position. The magazines can be replaced with standard drawers. The worktop of the case is fitted with an oil and Skydrol resistant plastic mat with compartments for small components.

‘

Code

920 C-SCH Magazine drawer

Colour

R kg

Can be combined with No

‘

€

‘

Code

‘

Dimensions mm

Can be combined R with No kg

€

81 48 10 60 920 C 60

530 x 350 x 48 920; 922N; 92KM G; 94N; 97N/7; 97N/7KM; 97N/8; 97N/8KM; 97H/10KM 3.2 109.00 81 48 10 80 920 C 80 530 x 350 x 68 920; 922N; 92KM G; 94N; 97N/6; 97N/6KM; 97N/8; 97N/8KM; 97H/8; 97H/KM 3.3 110.00 81 48 11 20 920 C 120 530 x 350 x 108 92KM G; 97N/6; 97N/6KM; 97N/7; 97N/7KM; 97N/8; 97N/8KM; 97H/8; 97H/8KM 3.7 119.00

‘

81 48 00 00

red RAL 3020

920; 922N; 94N; 97N; 97N/KM; 97H/8; 97H/KM 39

1075.00

‘

922N

Wheely box with drawers

With 4 wheels O 125 mm (2 pivoting castors, one wheel with parking brake). With 5 silver-coloured drawers (sizes: 4 drawers 60 mm high, 1 x 80 mm). Drawers are removable and lockable in fully extended position. The worktop of the case is fitted with an oil and Skydrol resistant plastic mat with compartments for small components. Spray can holders No SDH 921 can be retrofitted to the sides (please order separately).

‘

Code

Colour

Can be combined with No

R kg

€

red RAL 3020

920; 94N

37.4

670.00

‘

96 48 00 02 ‘

Made-to-measure for workshop professionals Compact, sturdy outer housing enables numerous

To maximise efficiency, fit the drawers with the

different configurations, each in 4 colours – this

STAHLWILLE Tool Control System or

exceptionally flexible range of STAHLWILLE Tool

corresponding standard ABS inlays. Exploit the

Trolleys leaves nothing to be desired!

convenient choice of accessories such as the rubbish bin, multifunctional back panel etc. to

This modular system, where the Tool Trolleys can

enhance the already generous standard

have from 6 to 10 drawers and a range of heights,

equipment and create your own personal

enables you to configure your STAHLWILLE Tool

workspace.

Trolleys to meet your own specific needs.

The modular tool tray system Tool trays from STAHLWILLE ensure perfect tool management within the Tool Trolley. All the tools are neatly arranged and instantly at hand, and always securely held in the same place.

Got your drawers organised? With our Tool Control System, the tools are arranged in chemicalresistant special foam inlays with three-dimensional cut-outs. The signal colour is yellow. A quick glance at the tray shows the service technician instantly if everything is where it should be. If he can see yellow – there’s something wrong!

The right version for every application Product benefits at a glance: Double-bearing wheels,

Topple-proof – it is not possible to pull out

oil and acid-resistant

more than one drawer at a time

2 Parking brakes

Can be equipped with STAHLWILLE Standard

Fully extendible drawers,

and Tool Control System inlays

simply lift to lock in place

Can be combined with Tool box No 94

Removable drawers

4 colour options:

Smooth-action rollers Subdivided worktop Cylinder lock at side

Green

Red

Blue

Grey

to provide central locking

Standard

RAL 3020

RAL 270 30 35 RAL 7016

Additional tray No 913/2 – extends the worktop

Multifunctional back panel No 913/3 – ensures a tidy workspace

Spray-can holder

The wheels on the Tool Trolley enable easy manoeuvring even when heavily loaded

Mobile work bench No 97N/6KM

Tool trolleys, Tool boxes, Sets Tool trolleys, Tool boxes, Workbenches and accessories 97N/6KM

Tool trolleys

97N/7KM

with solid multi-purpose worktop No 913/1, plastic handles on the drawers and impact protection strips on the vertical edges, fitted with doublebearing wheels, oil and acid-resistant, 2 parking brakes and 6 removable drawers mounted on smooth-action rollers, fully extendible drawers, simply lift to lock in place. Topple-proof – it is not possible to pull out more than one drawer at a time. Holders for paper rolls and spray cans. Can be enhanced with STAHLWILLE standard and TCS inlays (see pp. 33–59). Central locking thanks to the laterally-mounted cylinder lock. Can be combined with Tool boxes No 94N and No 94N/KM. Can also be enhanced using additional tray No 913/2 and multifunctional back panel No 913/3 (please order separately).

STAHLWILLE green

RAL 3020

RAL 2703035

Tool trolleys

with solid multi-purpose worktop No 913/1, plastic handles on the drawers and impact protection strips on the vertical edges, fitted with doublebearing wheels, oil and acid-resistant, 2 parking brakes and 7 removable drawers mounted on smooth-action rollers, fully extendible drawers, simply lift to lock in place. Topple-proof – it is not possible to pull out more than one drawer at a time. Holders for paper rolls and spray cans. Can be enhanced with STAHLWILLE standard and TCS inlays (see pp. 33–59). Central locking thanks to the laterally-mounted cylinder lock. Can be combined with Tool boxes No 94N and No 94N/KM. Can also be enhanced using additional tray No 913/2 and multifunctional back panel No 913/3 (please order separately).

STAHLWILLE green

RAL 7016

RAL 3020

RAL 2703035

RAL 7016

‘

Code

R kg

Colour

€

‘

81 16 00 04 81 16 00 05 81 16 00 06 81 16 00 40 ‘

97N/6KM G 97N/6KM R 97N/6KM B 97N/6KM A U

97N/6

green red, RAL 3020 blue, RAL 2703035 charcoal grey, RAL 7016

49.2 49.2 49.2 49.2

1006.00 1006.00 1006.00 1006.00

RAL 3020

RAL 2703035

R kg

€

51.4 51.4 51.4 51.4

1060.00 1060.00 1060.00 1060.00

Tool trolleys

with double-bearing, oil and acid-resistant wheels, 2 parking brakes and 7 removable drawers mounted on smooth-action rollers, fully extendible drawers, simply lift to lock in place. Topple-proof – it is not possible to pull out more than one drawer at a time. Holders for spray cans and paper rolls. Divided work area. Can be enhanced with STAHLWILLE standard and TCS inlays (see pp. 33–59). Central locking thanks to the laterallymounted cylinder lock. May be combined with Tool boxes No 94N and No 94N/KM.

RAL 7016

STAHLWILLE green

RAL 3020

RAL 2703035

RAL 7016

‘

Colour

R kg

‘

Colour

97N/7KM G green 97N/7KM R red, RAL 3020 97N/7KM B blue, RAL 2703035 97N/7KM A U charcoal grey, RAL 7016

97N/7

‘

81 16 00 01 81 16 00 02 81 16 00 03 81 16 00 58

81 16 00 10 81 16 00 11 81 16 00 12 81 16 00 57

Tool trolleys

STAHLWILLE green

‘

with double-bearing, oil and acid-resistant wheels, 2 parking brakes and 6 removable drawers mounted on smooth-action rollers, fully extendible drawers, simply lift to lock in place. Topple-proof – it is not possible to pull out more than one drawer at a time. Holders for spray cans and paper rolls. Divided work area. Can be enhanced with STAHLWILLE standard and TCS inlays (see pp. 33–59). Central locking thanks to the laterallymounted cylinder lock. May be combined with Tool boxes No 94N and No 94N/KM.

Code

97N/6G 97N/6R 97N/6B 97N/6A U

green red, RAL 3020 blue, RAL 2703035 charcoal grey, RAL 7016

47.7 47.7 47.7 47.7

€ 836.00 836.00 836.00 836.00

Code

Colour

R kg

€

97N/7G 97N/7R 97N/7B 97N/7A U

green red, RAL 3020 blue, RAL 2703035 charcoal grey, RAL 7016

49.9 49.9 49.9 49.9

890.00 890.00 890.00 890.00

‘

81 16 00 07 81 16 00 08 81 16 00 09 81 16 00 59 ‘

97N/8KM

Tool trolleys

97H/8KM

with solid multi-purpose worktop No 913/1, plastic handles on the drawers and impact protection strips on the vertical edges, fitted with doublebearing wheels, oil and acid-resistant, 2 parking brakes and 8 removable drawers mounted on smooth-action rollers, fully extendible drawers, simply lift to lock in place. Topple-proof – it is not possible to pull out more than one drawer at a time. Holders for paper rolls and spray cans. Can be enhanced with STAHLWILLE standard and TCS inlays (see pp. 33–59). Central locking thanks to the laterally-mounted cylinder lock. Can be combined with Tool boxes No 94N and No 94N/KM. Can also be enhanced using additional tray No 913/2 and multifunctional back panel No 913/3 (please order separately).

STAHLWILLE green

RAL 3020

RAL 2703035

STAHLWILLE green

RAL 3020

RAL 2703035

RAL 7016

‘

Code

R kg

Colour

€

‘

81 16 00 16 81 16 00 17 81 16 00 18 81 16 00 41

97N/8KM G green 97N/8KM R red, RAL 3020 97N/8KM B blue, RAL 2703035 97N/8KM AU charcoal grey, RAL 7016

53.5 53.5 53.5 53.5

1131.00 1131.00 1131.00 1131.00

‘

Code

Colour

R kg

€

56.8 56.8 56.8 56.8

1190.00 1190.00 1190.00 1190.00

‘

81 16 00 36 81 16 00 37 81 16 00 38 81 16 00 35

97H/8KM G green 97H/8KM R red, RAL 3020 97H/8KM B blue, RAL 2703035 97H/8KM AU charcoal grey, RAL 7016

‘

97N/8

97H/8

Tool trolleys

with double-bearing, oil and acid-resistant wheels, 2 parking brakes and 8 removable drawers mounted on smooth-action rollers, fully extendible drawers, simply lift to lock in place. Topple-proof – it is not possible to pull out more than one drawer at a time. Holders for spray cans and paper rolls. Divided work area. Can be enhanced with STAHLWILLE standard and TCS inlays (see pp. 33–59). Central locking thanks to the laterallymounted cylinder lock. May be combined with Tool boxes No 94N and No 94N/KM.

STAHLWILLE green

RAL 3020

RAL 2703035

Code

STAHLWILLE green

RAL 3020

RAL 2703035

RAL 7016

‘

Colour

R kg

‘

81 16 00 13 81 16 00 14 81 16 00 15 81 16 00 60

Tool trolleys

with smooth-running plastic castors, 2 locking brakes and 8 removable drawers mounted on smooth-action rollers, fully extendible drawers, simply lift to lock in place. Topple-proof – it is not possible to pull out more than one drawer at a time. Holders for spray cans and paper rolls. Divided work area. Can be enhanced with STAHLWILLE standard and TCS inlays (see pp. 33–59). Side wall space can be individually optimised using the square-hole perforations and hooks No 8031–8041. Central locking thanks to the laterally-mounted cylinder lock. May be combined with Tool boxes No 94N and No 94N/KM.

RAL 7016

‘

with solid multi-purpose worktop No 913/1, plastic handles on the drawers and impact protection strips on the vertical edges, with smooth-running plastic castors, 2 locking brakes and 8 removable drawers mounted on smoothaction rollers, fully extendible drawers, simply lift to lock in place. Topple-proof – it is not possible to pull out more than one drawer at a time. Holders for spray cans and paper rolls. Can be enhanced with STAHLWILLE standard and TCS inlays (see pp. 33–59). Side wall space can be individually optimised using the square-hole perforations and hooks No 8031–8041. Central locking thanks to the laterally-mounted cylinder lock. May be combined with Tool boxes No 94N and No 94N/KM. Can also be enhanced using additional tray No 913/2 and multifunctional back panel No 913/3 (please order separately).

RAL 7016

‘

Tool trolleys

97N/8G 97N/8R 97N/8B 97N/8AU

green red, RAL 3020 blue, RAL 2703035 charcoal grey, RAL 7016

51.7 51.7 51.7 51.7

€ 951.00 951.00 951.00 951.00

Code

Colour

R kg

€

97H/8G 97H/8R 97H/8B 97H/8AU

green red, RAL 3020 blue, RAL 2703035 charcoal grey, RAL 7016

55 55 55 55

987.00 987.00 987.00 987.00

‘

81 16 00 31 81 16 00 32 81 16 00 33 81 16 00 61 ‘

Tool trolleys, Tool boxes, Sets 97H/10KM

Tool trolleys

94N/KM

with solid multi-purpose worktop No 913/1, plastic handles on the drawers and impact protection strips on the vertical edges, with smooth-running plastic castors, 2 locking brakes and 10 removable drawers mounted on smooth-action rollers, fully extendible drawers, simply lift to lock in place. Topple-proof – it is not possible to pull out more than one drawer at a time. Holders for spray cans and paper rolls. Can be enhanced with STAHLWILLE standard and TCS inlays (see pp. 33–59). Side wall space can be individually optimised using the square-hole perforations and hooks No 8031–8041. Central locking thanks to the laterally-mounted cylinder lock. May be combined with Tool boxes No 94N and No 94N/KM. Can also be enhanced using additional tray No 913/2 and multifunctional back panel No 913/3 (please order separately).

Tool boxes

with plastic handle on the drawers and impact protection strips on the vertical edges and with 5 removable drawers on smooth-action rollers, fully extendible drawers, simply lift to lock in place. Handles integrated in side walls. Central locking thanks to the laterally-mounted cylinder lock. Can be enhanced with STAHLWILLE standard and TCS inlays (see pp. 33–59). Can also be mounted on Tool trolleys No 97N, No 97H, Wheely box No 922N.

STAHLWILLE green

RAL 3020

RAL 2703035

RAL 7016

‘

Code

Colour

R kg

€

94N/KM G 94N/KM R 94N/KM B 94N/KM AU

green red, RAL 3020 blue, RAL 2703035 charcoal grey, RAL 7016

35.5 35.5 35.5 35.5

666.00 666.00 666.00 666.00

‘

81 43 00 17 81 43 00 18 81 43 00 19 81 43 00 07 ‘

STAHLWILLE green

RAL 3020

RAL 2703035

94N

RAL 7016

‘

Code

Colour

R kg

97H/10KM G 97H/10KM R 97H/10KM B 97H/10KM AU

green red, RAL 3020 blue, RAL 2703035 charcoal grey, RAL 7016

63.5 63.5 63.5 63.5

‘

81 16 00 54 81 16 00 55 81 16 00 56 81 16 00 62

€ 1349.00 1349.00 1349.00 1349.00

Tool boxes

5 removable drawers on smooth-action rollers, fully extendible drawers, simply lift to lock in place. Handles integrated in side walls. Can be enhanced with STAHLWILLE standard and TCS inlays (see pp. 33–59). Central locking thanks to the laterally-mounted cylinder lock. Can also be mounted on Tool trolleys No 97N, No 97H/8, Wheely box No 922N.

‘

STAHLWILLE green

RAL 3020

RAL 2703035

RAL 7016

‘

Code

Colour

R kg

€

94NG 94NR 94NB 94NAU

green red, RAL 3020 blue, RAL 2703035 charcoal grey, RAL 7016

32.5 32.5 32.5 32.5

585.00 585.00 585.00 585.00

‘

81 43 00 01 81 43 00 02 81 43 00 03 81 43 00 08 ‘

92KM G

Mobile workbench

Drawers

with 4 smooth-running plastic wheels, of which 2 are swivelling and have parking brakes; 7 removable drawers with plastic handles, smooth-action rollers, fully extendible drawers, simply lift to lock in place, holders for paper rolls and spray cans, 30 mm multiplex beechwood worktop. Roomy storage area with a shelf in the cabinet, drawers and access door to storage area, each individually lockable with a cylinder lock. One outer side and the inside of the storage area access door can be individually adapted to suit requirements using perforated sheets with square holes for hooks No 8031–8041. Can be enhanced with STAHLWILLE standard and TCS inlays (see pp. 33–59).

coated with environmentally friendly silver-coloured textured powder-coat.

‘

Dimensions mm

81 48 20 60 81 48 20 80

SCH 60 SCH 80

530 x 350 x 60 530 x 350 x 80

81 48 21 00

SCH 100

81 48 21 20

SCH 120

Code

Can be combined with No

R kg

€

2.4

69.50

2.8

71.50

3.1

72.00

3.2 3.5

72.50 76.00

R kg

€

2.5

82.50

‘

81 48 21 40

SCH 140

94N; 97N/7; 97N/8; 922N 94N; 97N/6; 97N/8; 97H/8; 920; 922N 530 x 350 x 100 97N/6; 97N/7; 97N/8; 97H/8 530 x 350 x 120 97N/6; 97N/7; 97N/8; 97H/8; 920 530 x 350 x 140 97N/6; 97N/7; 97H/8

‘

Drawers with plastic handles coated with environmentally friendly silver-coloured textured powder-coat.

‘

Code

R kg

€

73.0

1869.00

‘

85 01 00 14 ‘

96/3

‘

Mobile workbench

Code

with chassis and retractable tool panel. 5 ball-bearing mounted steel drawers with slotted liners for partitioning drawers. Aluminium handle. Automatic catches on all drawers prevent them opening in transit. Lockup cabinet with height-adjustable shelf. Worktop is 50 mm thick, warp- and water resistant, multilayer bonded beech wood with clear varnish finish. Front edge has hardwood edging strip.

Dimensions mm

Can be combined with No

‘

81 48 30 60 81 48 30 80 81 48 31 00 81 48 31 20 1

81 48 31 40

SCH 60KM 530 x 350 x 60

92KM G; 97N/7KM; 97N/8KM; 97H/10KM; 94N/KM SCH 80KM 530 x 350 x 80 92KM G; 97N/6KM; 97N/8KM; 97H/8KM; 97H/10KM; 94N/KM SCH 100KM 530 x 350 x 100 97N/6KM; 97N/7KM; 97N/8KM; 97H/8KM; 97H/10KM SCH 120KM 530 x 350 x 120 92KM G; 97N/6KM; 97N/7KM; 97N/8KM; 97H/8KM; 97H/10KM SCH 140KM 530 x 350 x 140 97N/6KM; 97N/7KM; 97H/8KM

2.65 83.00 3.3

83.50

3.4

84.00

3.6

84.50

‘

VE 50-150

Drawer separators

allow you to divide up the drawer the way you need it. Consisting of: one each galvanised steel front and back piece and three separators. Separator height = 40 mm. ‘

Code

R kg

€

160

2980.00

‘

85 03 00 03 ‘

‘

Code

for No

‘

81 48 40 01 92KM G; 94N; 94N/KM; 97N; 97N/KM; 97H/8; 97H/KM; 920; 922N

R kg

€

0.7 21.00

‘

Tool trolleys, Tool boxes, Sets 912

Empty tray for small components

R 920

with compartments for small parts such as screws, nuts etc. Oil and Skydrol resistant. 8 compartments each 60 x 80 mm or 80 x 80 mm, 2 compartments each 100 x 165 mm or 50 x 330 mm.

Set of wheels

Set consists of two fixed wheels and two pivoting, 125 mm O. Two wheels with locking brake.

‘

Code

for No

R g

€

330

17.40

‘

83 81 20 70

92KM G; 94N; 94N/KM; 97N; 97N/KM; 97H/8; 97H/KM; 920; 922N 520 x 340 x 30

‘ ‘

913

Cover

Code

for No

R kg

€

94N; 94N/KM; 97N; 97N/KM; 920; 922N

4.3

56.00

‘

89 48 00 01

Oil and Skydrol resistant.

‘

SDH 921 ‘

Code

for No

R g

€

936

41.70

‘

89 01 00 11

94N; 94N/KM; 97N; 97N/KM; 97H/8; 97H/KM; 920; 922N 680 x 450 x 20

Spray can and paper roll holder

coated with environmentally friendly silver-coloured textured powdercoat.

‘

913/1

Multi-purpose worktop

Code

R kg

for No

€

‘

Particularly sturdy construction with robust, two-part handle-bar. Large worktop and 11 holes for storing e.g. screwdrivers, files, scrapers etc. additional compartments for small components and 2 round recesses for cans. 4 additional holes for mounting the multifunctional back panel No 913/3. Oil and Skydrol resistant.

81 48 30 01

AB97N

for No

R kg

€

3.1

69.50

‘

89 01 00 22

94N; 94N/KM; 97N; 97N/KM; 97H/8; 97H/KM; 920; 922N 780 x 540 x 35

37.00

Rubbish bin for attaching to tool trolleys

Capacity approx. 9 l. All painted parts have an environmentally friendly silver finish powder coat.

‘

Code

92KM G; 94N; 94N/KM; 97N; 97N/KM; 97H/8; 97H/KM; 920; 922N

‘

913/2

Additional tray

slots into and extends the multipurpose worktop No 913/1. Oil and Skydrol resistant.

‘

Code

R kg

€

92KM G; 97N; 97N/KM; 97H/8; 97H/KM 278 x 300 x 140 2.1

55.00

for No

‘

89 01 00 12 ‘

‘

Code

for No

R kg

€

443 x 540 x 35

2.2

124.00

‘

89 01 00 23

97N; 97N/KM; 97H/8; 97H/KM; 920; 922N

‘

913/3

Multifunctional back panel

Perforated panel for attaching to multipurpose worktop No 913/1, for mounting drawings & dockets using magnets or for hanging tools with hook sets No 8031 to 8041. Consisting of: 2 uprights for inserting in the base and perforated panel, silver paint finish.

PB98

Personal box

for personal effects. With separate locking system. Can be bolted to Tool trolleys built in 2008 or later; for fitting to older models, 2 holes will need to be drilled (6.5 mm). All painted parts have an environmentally friendly silver finish powder coat.

‘

Code

R kg

€

92KM G; 97N; 97N/KM; 97H/8; 97H/KM 277 x 317 x 115 2.4

141.00

for No

‘

89 01 00 13 ‘ ‘

Code

R kg

€

570 x 365 x 40

3.7

149.00

‘

89 01 00 24 ‘

• •

• • • • • •

G KM

0 92

• • •

• • • •

• •

•

• • • •

• • •

• •

• • • • • •

• •

• • •

•

• •

• • •

• •

• • • • • •

446/08

•

• •

• • •

•

• •

•

Tool boxes

•

• • • •

Lockable personal box PB 98

•

• • • •

Spray can holders SDH 921

•

• • • • •

Rubbish bin AB 97N

•

• • • • •

Set of wheels R 920

•

• • • • •

Additional tray 913/2

/1 0K M

•

• • • • •

Multifunctional back panel 913/3 (only in conjunction with 913/1)

97 H

•

• • •

• •

• • • •

Worktops 913 913/1

• • • •

• • •

•

• • •

• • • •

Empty tray for small components 912

•

• •

• • • •

Tool magazines 920 C 60 920 C 80 920 C 120

97 H No

• • • • •

• •

• • • •

Magazine drawer 920C-SCH

/8 KM No

•

• • • • •

• • •

• • • •

Drawer separators VE 50-150

97 H

/8 KM

• • • •

Drawers SCH 60 SCH 80 SCH 100 SCH 120 SCH 140 Drawers with plastic handles SCH 60KM SCH 80KM SCH 100KM SCH 120KM SCH 140KM

83/010

97 N

KM /7 97 N

97 N

• • • •

97 N

Ac ce ss or ie s

What accessories are available for each Tool Trolley, Tool Box and Mobile Workbench?

•

• • • •

• •

•

• • •

Tool box, 5 trays

lockable by padlock.

Tool box, 3 trays

lockable by padlock.

‘

Code

W mm

H mm

D mm

R kg

€

530

200

5.59

68.00

‘ ‘

Code

W mm

H mm

D mm

R kg

€

420

150

200

3.7

44.80

‘

81 07 00 00 ‘

W = Width, H = Height, D = Depth ‘

81 06 00 00 ‘

W = Width, H = Height, D = Depth

82/013

‘

83/09

Tool box

with lift out tray. Lockable by padlock.

Tool box, 5 trays

lockable by padlock.

‘

Code

‘

W mm

H mm

D mm

R kg

‘

81 05 00 00

420

200

4.7

€ 57.00

Code

W mm

H mm

D mm

R kg

€

545

225

180

6.9

112.00

‘

81 08 00 00

‘

W = Width, H = Height, D = Depth

‘

Tool trolleys, Tool boxes, Sets 13216/2

Tool box

910

with 2 drawers and one compartment under the lid (each 449 x 55 x 185 mm), safety lock and dip-coated carrying handle on the lid. Wide, spring-mounted dip-coated carrying handles on the sides. High-grade, fully extendible sturdy rails. Easily removable drawers. The perforated panel can be arranged as required using spring loaded clips No 8050 (page 21, please order separately).

Non-slip mat GRIPMAT

protects the tools, prevents them sliding and rattling. 1 roll will normally be sufficient for a tool trolley with up to 7 drawers.

‘

Code

L mm

W mm

R g

€

3800

370

680

36.70

‘

89 01 00 03 ‘

L = Length, W = Width ‘

‘

Code

W mm

H mm

D mm

R kg

510

270

230

‘

81 09 10 02

€

Perforated panels, hooks and holding devices

299.00

‘

8002

W = Width, H = Height, D = Depth

Perforated panel

‘

13216/3

Perforation 9 x 9 mm, made of sturdy, 1 mm thick sheet steel, with 2 strengthening ribs at rear. These ribs carry the holes for wall mounting panel. For the individual mounting of tools, on a variety of hooks and clips No 8031–8041.

Tool box

with 3 drawers and one compartment under the lid (each 449 x 55 x 185 mm), safety lock and dip-coated carrying handle on the lid. Wide, spring-mounted dip-coated carrying handles on the sides. High-grade, fully extendible sturdy rails. Easily removable drawers. The perforated panel can be arranged as required using spring loaded clips No 8050 (page 21, please order separately).

‘

Code

W mm

H mm

D mm

R kg

500

1000

‘

80 02 00 01

€ 111.00

‘

W = Width, H = Height, D = Depth ‘

8144

Workshop cabinet with hooks

‘

Code

W mm

H mm

D mm

R kg

€

510

365

230

379.00

‘

81 09 10 03 ‘

W = Width, H = Height, D = Depth ‘

13216/4

Tool box

with 4 drawers, a compartment under the lid (each 449 x 55 x 185 mm), safety lock and sturdy textured aluminium sheeting on the lid. Wide, spring-mounted dip-coated carrying handles on the sides. High-grade, fully extendible sturdy rails. Easily removable drawers. The perforated panel can be arranged as required using spring loaded clips No 8050 (page 21, please order separately).

with perforated panels for rear and side walls, complete with shelves. There is a spacious drawer on telescopic rails below the shelves. The cabinet contains a range of hooks: 12 pieces No 8031 size 1, 3 pieces No 8031 size 2, 1 piece No 8032 size 1, 3 pieces No 8034 size 1, 7 pieces No 8035 size 1, 3 pieces No 8036 size 1, 5 pieces No 8036 size 2, 12 pieces No 8036 size 3, 5 pieces No 8038, 1 piece No 8041.

‘

Code

W mm

H mm

D mm

R kg

€

655

800

270

776.00

‘

96 81 44 07 ‘

W = Width, H = Height, D = Depth ‘

‘

Code

W mm

H mm

D mm

R kg

€

510

415

230

449.00

‘

81 09 10 04 ‘

W = Width, H = Height, D = Depth ‘

8031

Single hook

8036

for perforated panel No 8002, Workshop cabinet No 8144, Mobile workbench No 92KM G and Tool trolleys No 97H/8, 97H/KM.

Spring clip

for perforated panel No 8002, Workshop cabinet No 8144, Mobile workbench No 92KM G and Tool trolleys No 97H/8, 97H/KM.

1 ‘

‘

Code

size

‘

80 31 00 30 80 31 00 60 80 31 00 90

1 2 3

30 60 90

R g S 13 17 21

5 5 5

€ 2.70 2.70 2.70

Code

size

R g

1 2 3

12 18 24

9 10 14

6 6 6

R g

30 x 72

‘

80 36 00 12 80 36 00 18 80 36 00 24

€ 2.40 2.40 2.40

‘

8032

Twin hook

8038

for perforated panel No 8002, Workshop cabinet No 8144, Mobile workbench No 92KM G and Tool trolleys No 97H/8, 97H/KM.

Container

for perforated panel No 8002, Workshop cabinet No 8144, Mobile workbench No 92KM G and Tool trolleys No 97H/8, 97H/KM.

‘

Code

size

‘

80 32 00 30 80 32 00 60

1 2

30 60

R g S 19 26

3 3

€ 4.50 4.50

Code ‘

80 38 00 30

€ 1.95

‘

8034

8041

Twin hook

Holding device for spanners

for perforated panel No 8002, Workshop cabinet No 8144, Mobile workbench No 92KM G and Tool trolleys No 97H/8, 97H/KM.

‘

Code

size

R g S

1 2

40 x 35 50 x 40

30 30

‘

80 34 00 40 80 34 00 50

3 3

€ 4.60 4.75

‘

Code

R g

235 x 144 x 47

‘

8035

80 41 02 35

Square lug

€ 13.70

‘

for perforated panel No 8002, Workshop cabinet No 8144, Mobile workbench No 92KM G and Tool trolleys No 97H/8, 97H/KM.

8050

Spring clip

for perforated panel No 8002, Workshop cabinet No 8144, Mobile workbench No 92KM G, Tool trolleys No 97H/8, 97H/KM and Tool boxes No 13216/2, No 13216/3, 13216/4.

‘ ‘

Code

size

‘

80 35 00 17 80 35 00 20

1 2

17 x 35 20 x 55

R g S 23 26

3 3

€ 4.60 4.60

Code

size

R g

6 12

28 35

5 5

‘

81 48 50 06 81 48 50 12

€ 6.95 6.95

‘

Tool trolleys, Tool boxes, Sets

Tool cases, hard shell

Workshop sets

13209/1

801N

Tool case, hard shell, base model

Large tool set

127 Tools

sturdy aluminium frame, 2 locks, ergonomically shaped carrying handle, robust jointed lid-prop, tool-holder panel for storing tools from both sides, with 21 pockets and integrated document pouch. ABS insert can be subdivided and includes cover with 6 pockets.

‘

Code

R kg

€

28.6

2033.20

‘

97 84 12 10 ‘

No 10/12

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 21 x 23; 24 x 27; 25 x 28; 30 x 32 mm

No 12/10Pc

sizes 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11 mm

No 20/12

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 21 x 23; 24 x 27; 25 x 28; 30 x 32 mm

No 29

sizes 10 x 11; 12 x 13; 14 x 15; 16 x 18; 17 x 19; 21 x 23 mm

No 35c Pkw

sizes 17; 19; 22; 1/2'' D

No 39 No 39/1

400 mm (2x) 600 mm (2x)

No 50

1/2'' a sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 23; 24; 25; 26; 27; 28; 30; 32 mm

No 51

a sizes 13; 16 mm-5/8''; 17; 18; 19 mm; 20.8 mm-13/16''; 22; 24; 27; 30; 32 mm

No 54

1/2''

a sizes 4; 5; 6; 8; 10; 12; 14 mm

No 501

1/2''

D 433 mm

No 504/15

1/2''

D 397 mm

No 506

1/2''

D 300 mm

No 509/2

1/2''

D a 52 mm

No 509/5

1/2''

D a 130 mm

No 509/10

1/2''

D a 255 mm

No 510

1/2''

D a 71 mm

No 512

1/2''

No 100/8

200 mm

No 103

150 mm

No 104

120 x 4 mm

No 105

100 x 10 mm

No 4622

size 2 (1.2 x 6.5 x 125 mm); size 3 (1.2 x 8.0 x 150 mm); size 5 (2.0 x 12.0 x 200 mm)

No 4628

size 2 (0.6 x 3.5 x 75 mm); size 4 (0.8 x 4.0 x 125 mm)

No 4630

sizes 1; 2; 3

No 4724

size 2 (1.0 x 5.5 x 25 mm)

‘

Code

W mm

H mm

D mm

R kg

€

460

310

160

4.1

185.00

‘

81 62 00 02

‘

W = Width, H = Height, D = Depth ‘

‘

13209/2

Tool case, hard shell, medium model

as for No 13209/1, but with an additional combination lock, tool-holder panel with 13 pockets and 26 rubber-loop holders, separate document pouch in the lid, ABS inlay tray with 13 pockets and 8 rubber-loop holders.

‘

1/2''

‘

Code

W mm

H mm

D mm

R kg

‘

81 62 00 03

460

310

180

4.5

‘

€

‘

246.00

‘

W = Width, H = Height, D = Depth ‘ ‘

13209

Tool case, hard shell, premium model

‘

as for No 13209/1, but with an additional combination lock, tool-holder panel with 13 pockets and 26 rubber-loop holders, additional tool-holder panel with 11 pockets and a smaller components pouch, separate document pouch in the lid, ABS inlay tray with 13 pockets and 8 rubber-loop holders.

‘

No 65 01 6 180 ‘ ‘

Code

W mm

H mm

D mm

R kg

460

310

180

‘

81 62 00 01

€ 301.00

No 65 29 6 200 ‘

No 65 30 6 200 ‘

‘

W = Width, H = Height, D = Depth

No 65 43 4 002

‘ ‘

No 65 45 4 002 ‘

No 65 54 4 250 ‘

No 65 64 2 250 ‘

No 4622

size 2 (1.2 x 6.5 x 125 mm); size 3 (1.2 x 8.0 x 150 mm); size 5 (2.0 x 12.0 x 200 mm)

No 4628

size 2 (0.6 x 3.5 x 75 mm); size 4 (0.8 x 4.0 x 125 mm)

No 4630

sizes 1; 2; 3

No 4724

size 2 (1.0 x 5.5 x 25 mm)

No 66 02 6 160 ‘

No 10670

310 mm

No 10676

85 x 12 x 315 mm

‘

‘ ‘

No 10960

500 g

‘

No 11095/13

0.05–1 mm

No 65 01 6 180

‘

No 12025

210 mm

No 12030

260 mm

No 12035

210 mm

‘

No 65 29 6 200 ‘

‘

No 65 30 6 200

‘

No 12050

300 mm

No 65 43 4 002

‘

No 12150

200 mm

No 12200

145 mm

No 65 45 4 002 ‘

‘

No 65 54 4 250

‘

No 65 64 2 250

No 12250

‘

No 66 02 6 160

No 12320

‘

No 12375

No 10670

310 mm

No 10676

85 x 12 x 315 mm

No 10960

500 g

No 11095/13

0.05–1 mm

No 12025

210 mm

No 12030

260 mm

No 12035

210 mm

No 12050

300 mm

No 12150

200 mm

No 12200

145 mm

‘

No 12931

‘

802N

Large tool set ‘

129 Tools ‘

‘

Code

R kg

€

28.1

2146.80

‘

97 84 03 12

‘

‘ ‘

No 12/10Pc

sizes 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11 mm

No 13/26

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 23; 24; 25; 26; 27; 28; 29; 30; 32 mm

‘ ‘

‘

No 29

sizes 10 x 11; 12 x 13; 14 x 15; 16 x 18; 17 x 19; 21 x 23 mm

‘

No 12250 ‘

No 12320 ‘

No 12375 ‘

No 35c Pkw

sizes 17; 19; 22; 1/2'' D

No 39 No 39/1

400 mm (2x) 600 mm (2x)

No 50

1/2'' a sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 23; 24; 25; 26; 27; 28; 30; 32 mm

‘

No 12931

‘

803N

Large tool set

160 Tools

‘

No 51

a sizes 13; 16 mm-5/8''; 17; 18; 19 mm; 20.8 mm-13/16''; 22; 24; 27; 30; 32 mm 1/2''

‘

No 54

1/2''

a sizes 4; 5; 6; 8; 10; 12; 14 mm

No 501

1/2''

D 433 mm

No 504/15

1/2''

D 397 mm

No 506

1/2''

D 300 mm

No 509/2

1/2''

D a 52 mm

No 509/5

1/2''

D a 130 mm

No 509/10

1/2''

D a 255 mm

‘

No 510

1/2''

D a 71 mm

No 512

1/2''

No 100/8

200 mm

No 103

150 mm

No 104

120 x 4 mm

No 105

100 x 10 mm

‘

Code

R kg

€

17.8

1652.90

‘

97 84 26 13 ‘

No 10/12

No 10a

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 21 x 23; 24 x 27; 25 x 28; 30 x 32 mm sizes 1/4 x 5/16; 3/8 x 7/16; 1/2 x 9/16; 5/8 x 11/16; 3/4 x 7/8; 15/16 x 1''

‘

No 12/10Pc No 12a/13Pc

sizes 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11 mm sizes 5/32; 3/16; 13/64; 7/32; 15/64; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16''

‘

No 13 No 13a

sizes 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19 mm sizes 3/8; 7/16; 1/2; 9/16; 5/8; 11/16; 3/4''

‘

No 21

‘

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 17 x 19 mm

‘

Continuation next page 23

Tool trolleys, Tool boxes, Sets No 20a

sizes 1/4 x 5/16; 3/8 x 7/16; 1/2 x 9/16; 3/4 x 7/8; 15/16 x 1''

No 23/8

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22 mm sizes 3/8 x 7/16; 1/2 x 9/16; 9/16 x 5/8; 11/16 x 3/4; 13/16 x 7/8; 15/16 x 1''

‘

No 230a ‘

No 50

No 50a

1/2'' a sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 23; 24; 27; 30; 32 mm 1/2'' a sizes 3/8; 7/16; 1/2; 9/16; 5/8; 11/16; 3/4; 13/16; 7/8; 15/16; 1; 1 1/16; 1 1/8; 1 3/16; 1 1/4''

804N

Large tool set

105 Tools ‘

Code 97 84 27 14

1/2''

D 433 mm

No 504/15

1/2''

D 397 mm

No 506

1/2''

D 300 mm

No 509/2

1/2''

D a 52 mm

No 509/5

1/2''

D a 130 mm

No 509/10

1/2''

D a 255 mm

No 510

1/2''

D a 71 mm

No 512

1/2''

No 100

150 mm

No 105

120 x 12 mm

No 108

150 x 4; 150 x 6 mm

‘

No 4620

size 3 (1.0 x 5.5 x 100 mm); size 4 (1.2 x 6.5 x 150 mm); size 5 (1.6 x 8.0 x 175 mm); size 6 (1.6 x 10.0 x 200 mm)

‘

No 12/10Pc

sizes 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11 mm

No 13

sizes 6; 7; 8; 9; 10; 11; 12; 13; 15; 16; 17; 18; 19; 21; 22; 24; 27; 30; 32 mm

No 40/13/6

1/4'' a No 40 sizes 3.5; 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13 mm; No 400; 404; 405/2; 405/6; 407; 415

No 50

1/2'' a sizes 10; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24; 27; 30; 32 mm

No 51

1/2'' a sizes 16 mm-5/8''; 20.8 mm-13/16''

No 506

1/2''

D 300 mm

No 509/5

1/2''

D a 130 mm

No 509/10

1/2''

D a 255 mm

No 510

1/2''

D a 71 mm

No 512

1/2''

No 100/8

200 mm

No 103

200 mm

No 105-8/6 K

No 105/120 x 10 mm; No 108/150 x 2.5; 150 x 3; 150 x 4; 150 x 5; 150 x 6 mm

No 4620

size 1 (0.6 x 3.5 x 75 mm); size 2 (0.8 x 4.0 x 100 mm); size 3 (1.0 x 5.5 x 125 mm); size 4 (1.2 x 6.5 x 150 mm); size 5 (1.6 x 8.0 x 175 mm)

No 4628

size 1 (0.4 x 2.5 x 60 mm)

No 4630

size 1; size 2

‘

‘ ‘

‘

No 4628

size 2 (0.6 x 3.5 x 75 mm)

No 4630

sizes 1; 2; 3

No 4724

size 2 (1.0 x 5.5 x 25 mm)

‘

No 65 01 6 200 ‘

No 65 09 5 140

1025.00

‘

No 501 ‘

€

11.8

‘

R kg

‘

No 65 51 6 240

‘

No 66 02 6 160

No 65 01 6 180

‘ ‘

No 10760CV/9

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

No 65 29 6 200 ‘

‘

No 65 51 6 240 ‘

No 65 64 2 250 ‘

No 10760aCV/10Pc sizes 1/16; 5/64; 3/32; 1/8; 5/32; 3/16; 7/32; 1/4; 5/16; 3/8''

No 66 02 6 160 ‘

‘

No 10970

1 lb.

No 12050

300 mm

‘

No 10760CV/9

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

No 10955

35 mm O

No 10960

500 g

No 11095/20

0.05–1 mm

‘

‘ ‘

‘

No 12251 ‘

No 12321 ‘

No 12375 ‘

811N

Car tool set

3027

84 Tools

Electrician tool set

78 Tools

‘

R kg

Code ‘

97 84 13 11

16.3

€ 1066.80

‘

Code

R kg

€

6.3

933.10

‘

97 84 31 01 ‘

No 10/12

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 21 x 23; 24 x 27; 25 x 28; 30 x 32 mm

No 20/12

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 21 x 23; 24 x 27; 25 x 28; 30 x 32 mm

No 39

400 mm (2x)

No 50

1/2'' a sizes 10; 11; 12; 13; 14; 15; 16; 17; 19; 21; 22; 23; 24; 26; 27; 30; 32 mm

No 13 No 13/9

sizes 6; 7 mm sizes 9; 10; 11; 12; 13; 14; 17; 19; 22 mm

No 40/23/6N

1/4'' a No 40 sizes 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm No 41K sizes 0.6 x 3.5; 1 x 5.5; 1.2 x 8 mm No 44K: 3; 4; 5; 6; 8 mm No 44P: sizes 1; 2; 3; 4 No 400; 404; 405/2; 405/6; 407; 415

No 46

3/8''

a sizes 12; 20.8 mm

No 4600

3/8''

a size 16 mm

No 425

3/8''

D 165 mm

No 428

3/8''

D a 46 mm

No 427/6

3/8''

D a 160 mm

No 4628

size 2 (0.6 x 3.5 x 75 mm); size 4 (0.8 x 4.0 x 125 mm); size 6 (1.0 x 5.5 x 200 mm)

No 4630

size 1; size 2

No 4724

size 2 (1.0 x 5.5 x 25 mm)

No 4734

size 2

No 10546

size 3

No 10551

size 1 x 2

No 10760CV/9

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

No 7756

3–48 Volt

‘

No 51

a sizes 16 mm-5/8''; 20.8 mm-13/16'' 1/2''

‘

No 54

1/2''

‘

No 504/15

1/2''

‘

a sizes 4; 5; 6; 8; 10; 12; 14 mm D 397 mm

‘

No 506

1/2''

D 300 mm

No 509/2

1/2''

D a 52 mm

No 509/5

1/2''

D a 130 mm

‘

No 509/10

1/2''

D a 255 mm

‘

No 510

1/2''

D a 71 mm

No 512

1/2''

No 100/8

200 mm

‘

No 103

150 mm

No 104

120 x 4 mm

No 105

100 x 10 mm

No 4622

size 2 (1.2 x 6.5 x 125 mm); size 3 (1.2 x 8.0 x 150 mm); size 5 (2.0 x 12.0 x 200 mm)

‘ ‘

‘

No 4628

size 2 (0.6 x 3.5 x 75 mm); size 4 (0.8 x 4.0 x 125 mm)

No 4630

sizes 1; 2; 3

No 4724

size 2 (1.0 x 5.5 x 25 mm)

No 65 01 5 180 ‘

No 65 29 5 160

‘

No 65 30 5 160 ‘

No 65 51 6 240

No 65 01 6 180

‘

No 65 29 6 200

‘

No 66 02 6 140

‘

No 65 30 6 200

No 66 22 5 160

‘ ‘

No 65 43 4 002

No 10641

‘ ‘

No 65 45 4 002 ‘

No 10956

O 35 mm

No 1551

for contact sizing y 2.8 mm

No 1552

for contact sizing y 5.8 mm

No 1560

Content: 1 Piece No 1501 ejection tool for contact sizing O 1.5 mm 1 Piece No 1502 ejection tool for contact sizing O 3.5 mm 1 Piece No 1503 ejection tool for contact sizing O 4.0 mm ABS (trucks) resp. mounting bush No 1523 2 Pieces No 1511 dismounting bush O 1.5 mm (1 Piece assembled) 2 Pieces No 1512 dismounting bush O 3.5 mm (1 Piece assembled) 2 Pieces No 1513 dismounting bush O 4.0 mm 1 Piece No 1523 mounting bush (ABS)

‘

No 65 54 4 250

‘

No 65 64 2 250

‘

No 66 02 6 160 ‘

No 10670

310 mm

No 10676

85 x 12 x 315 mm

No 10960

500 g

‘

No 12375 ‘

‘

Tool trolleys, Tool boxes, Sets 841N

Construction machinery set

Tool sets for aerospace industry

129 tools, recommended Tool box No 94N, p. 16

13200a

‘

Code

R kg

€

35.9

1968.80

‘

97 84 14 18

Basic tool set for aircraft mechanics (piston engine)

178 Tools

‘

No 10/9

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 21 x 24 mm

‘

Code

R kg

€

2739.65

‘

97 84 60 11 ‘

‘

No 14

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 27; 30; 32; 34; 36 mm

No 12a/13Pc

sizes 5/32; 3/16; 13/64; 7/32; 15/64; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16''

No 13a

sizes 3/16; 13/64; 7/32; 15/64; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16; 19/32; 5/8; 11/16; 3/4; 25/32; 13/16; 7/8; 15/16; 1''

No 230a

sizes 1/4 x 5/16; 5/16 x 11/32; 3/8 x 7/16; 7/16 x 1/2; 1/2 x 9/16; 9/16 x 5/8; 11/16 x 3/4; 13/16 x 7/8; 15/16 x 1''

No 4025

size 4

No 40aD/30/7QR

a No 40a: size 1/8'' No 40aD: sizes 5/32; 3/16; 7/32; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16'' No 40aDL: sizes 5/32; 3/16; 7/32; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16'' No 402a: sizes 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2'' No 400QR; 405/2QR (2x); 405/6QR; 407QR; 412; 415 SG-QR

No 409

3/8''

D 1/4'' a

No 415SGB

1/4''

No 46a

3/8''

a sizes 7/16; 1/2; 9/16; 5/8''

No 427/18

3/8''

D a 455 mm

No 431

1/4''

D 3/8'' a

No 45a/22/8QR

3/8''

‘

No 40/13/6

a No 40 sizes 3.5; 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13 mm; No 400; 404; 405/2; 405/6; 407; 415 1/4''

‘

No 50/16/6

1/2'' a No 50: sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24; 27; 30; 32 mm No 506; 509/5; 509/10; 506; 510; 512

‘

No 504/15

1/2''

D 397 mm

No 514

3/4''

D 1/2'' a

No 55/9/6N

3/4'' a No 55: sizes 32; 34; 36; 38; 41; 46; 50; 55; 60 mm No 552; 554; 556; 558; 559/8; 559/16

No 568

1/2''

No 102-5/6Pc

No 104/120 x 2; 120 x 4 mm No 105/120 x 10 mm No 106/125 mm; 150 mm No 107/125 mm

‘

D 3/4'' a

1/4''

‘

‘ ‘

No 4840

sizes 1; 2

No 4891

r 4820: 0.6 x 3.5 x 75 mm 0.8 x 4.0 x 100 mm 1.0 x 5.5 x 125 mm 1.2 x 6.5 x 150 mm k 4830: sizes 1; 2

‘

a No 45a: sizes 1/4; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16; 5/8; 11/16; 3/4; 13/16; 7/8; 15/16; 1'' No 47a: sizes 5/16; 3/8; 7/16; 1/2; 9/16; 5/8; 11/16; 3/4''

No 427/10QR; 427/6QR; 427/3QR; 428QR; 435SG-QR; 442; 443; 453 ‘

No 10760CV/9

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

‘

No 65 01 5 180 ‘

No 1220 No 1221 No 1222 No 1223

size 0 size 1 size 2 size 3

No 13010

sizes 0; 1; 2; 3; 4; 5; 6; 8; 10

No 4006/1

1/4''

No 12503

1/4''

No 4622

size 1 (1.0 x 5.5 x 100 mm); size 3 (1.2 x 8.0 x 150 mm); size 4 (1.6 x 10.0 x 175 mm)

No 4632

sizes 1; 2; 3

‘

No 65 31 5 170 ‘

‘

No 65 63 2 250 ‘ ‘

‘

No 65 67 2 280 ‘

No 65 72 6 240 ‘ ‘

No 66 00 5 160 ‘

‘

No 10956

O 35 mm

No 10960

300; 500 g

No 11095/20

20 blades 0.05–1 mm

No 12050

300 mm

No 12050R

10 blades

‘

No 10760aCV/13 sizes 0.028; 0.035; 0.050; 1/16; 5/64; 3/32; 7/64; 1/8; 9/64; 5/32; 3/16; 7/32; 1/4'' ‘

‘

No 65 01 5 180 ‘

No 65 10 5 190

‘ ‘

No 65 31 5 170

‘ ‘

No 65 51 6 240

‘

No 12374

No 65 75 1 280

‘

No 12600

1800 g

‘

No 66 00 5 180

‘

No 12931 ‘

No 105-8/6 K

No 105/120 x 10 mm; No 108/150 x 2.5; 150 x 3; 150 x 4; 150 x 5; 150 x 6 mm

No 65 75 1 220 ‘

No 66 00 5 180 ‘

‘

No 10670

215 mm

No 10955

O 27 mm

‘

300 g

‘

No 105-8/6 K

No 105/120 x 10 mm; No 108/150 x 2.5; 150 x 3; 150 x 4; 150 x 5; 150 x 6 mm

No 10955

O 27 mm

No 10960

300 g

No 12025

210 mm

No 12030

260 mm

No 12035

210 mm

No 12036

250 mm

‘

No 10960

‘

No 12320 ‘ ‘

No 12321 ‘ ‘

No 12600

500 g

‘ ‘

No 12900 ‘

‘

No 12921N

O 50 mm

No 12922E

O 6 mm

‘

No 12053 ‘

No 12931

No 13110

300 mm

No 12321 ‘

‘

No 12900N

‘

No 13126 ‘

No 12921N

O 40 mm

No 13110

300 mm

‘

No 13135

‘

No 13126 ‘

13205a

Standard aircraft maintenance tool set 13207a

131 Tools

Electricians set in tool case No 13209

‘

Code

R kg

€

7.8

1758.55

‘

97 84 60 12 ‘

No 12a/13Pc

sizes 5/32; 3/16; 13/64; 7/32; 15/64; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16''

‘

No 13a

sizes 3/16; 13/64; 7/32; 15/64; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16; 19/32; 5/8; 11/16; 3/4''

111 Tools ‘

Code

R kg

€

12.5

1585.20

‘

98 81 03 22 ‘

No 13a

sizes 3/16; 13/64; 7/32; 15/64; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16; 19/32; 5/8; 11/16; 3/4''

No 12a/13Pc

sizes 5/32; 3/16; 13/64; 7/32; 15/64; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16''

No 40a

1/4''

a sizes 1/8; 5/32''

No 400QR

1/4''

D 150 mm

No 40aD/12/7QR

a No 40a: size 1/8'' No 40aD: sizes 5/32; 3/16; 7/32; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16'' No 400QR; 405/2QR (2x); 405/6QR; 407QR; 412; 415SG-QR

No 4006/1

1/4''

No 4660 VDE

size 1 (0.4 x 2.5 x 75 mm); size 3 (0.6 x 3.5 x 100 mm); size 5 (1.0 x 5.5 x 125 mm); size 6 (1.2 x 6.5 x 150 mm)

No 4665 VDE

sizes 0; 1; 2

‘

No 230a

sizes 5/16 x 11/32; 3/8 x 7/16; 7/16 x 1/2; 1/2 x 9/16; 9/16 x 5/8; 11/16 x 3/4''

‘

No 4025

size 4

No 409

3/8''

No 40aD/30/7QR

‘

D 1/4'' a

‘

1/4''

‘

No 1161–1166

0.5 x 4; 0.6 x 3.5; 0.6 x 4.5; 0.8 x 4; 0.8 x 5.5; 1 x 5.5 mm

‘

No 10760aCV/13 sizes 0.028; 0.035; 0.050; 1/16; 5/64; 3/32; 7/64; 1/8; 9/64; 5/32; 3/16; 7/32; 1/4''

‘

No 1220–1223

sizes 0; 1; 2; 3

No 13008

sizes 0; 1; 2; 3; 4; 5

No 13010

sizes 0; 1; 2; 3; 4; 5; 6; 8; 10

No 4006/1

1/4''

No 12503

1/4''

No 4622

size 1 (1.0 x 5.5 x 100 mm); size 3 (1.2 x 8.0 x 150 mm); size 4 (1.6 x 10.0 x 175 mm)

‘

No 65 01 5 160, No 65 01 5 180 ‘

‘

No 65 24 5 160 ‘

No 65 29 5 200 ‘

No 65 30 5 200 ‘

‘

No 4632 ‘

sizes 1; 2; 3

No 65 31 5 170 ‘

No 65 01 5 180 ‘

No 65 55 5 125 ‘

No 65 10 5 190

No 65 76 5 231

‘ ‘

No 65 31 5 170

No 66 00 5 130

‘ ‘

No 65 51 6 240 ‘

Continuation next page 27

Tool trolleys, Tool boxes, Sets 13210

No 66 02 5 180 ‘

101 Tools No 66 23 5 160

‘

No 105-8/6 K

Electronics set in tool case No 13209

No 105/120 x 10 mm; No 108/150 x 2.5; 150 x 3; 150 x 4; 150 x 5; 150 x 6 mm

Code

R kg

€

10.7

1661.50

‘

98 81 03 01

‘

No 10960

No 13

300 g

No 13a

sizes 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm sizes 3/16; 7/32; 1/4; 3/8; 1/2''

No 16

sizes 3.2; 3.5; 4; 4.5; 5 mm

No 4025

size 4

No 4621

size 5 (1.2 x 8.0 x 160 mm)

No 4630

sizes 0; 1; 2

No 4660 VDE

size 1 (0.4 x 2.5 x 75 mm); size 4 (0.8 x 4.0 x 100 mm); size 6 (1.2 x 6.5 x 150 mm)

No 4724

size 1 (0.6 x 3.5 x 25 mm); size 2 (1.0 x 5.5 x 25 mm)

No 4753

i sizes 0.7; 0.9; 1.3 mm

No 4797

r 4751: 0.3 x 1.5; 0.4 x 2; 0.4 x 2.5; 0.5 x 3 mm l 4752: No 00; No 0; No 1

No 10546

size 2 (0.8 x 4.0 x 100 mm); size 3 (1.0 x 5.5 x 125 mm)

No 10554

220–250 Volt

‘

No 12053

‘

No 12320

‘

No 12600

500 g

No 12921N

O 40 mm

No 12922E

O 6 mm

‘

No 12941 ‘

No 13008

sizes 0; 1; 2; 3; 4; 5

No 13010

sizes 0; 1; 2; 3; 4; 5

‘

No 13126

‘

No 13130 ‘

No 13131 ‘ ‘

‘

No 13209 ‘ ‘

13208a

No 10760aCV/13 sizes 0.028; 0.035; 0.050; 1/16; 5/64; 3/32; 7/64; 1/8; 9/64; 5/32; 3/16; 7/32; 1/4''

Board case for aircraft in tool case No 13209

‘

57 Tools

No 10765

sizes 2; 2.5; 3; 4 mm

No 12500N

sizes 6; 7 mm

‘

Code

‘

R kg

€

8.9

846.55

‘

98 81 03 23

No 018/3 ‘

No 109

‘

sizes 1; 2; 3; 4; 5; 6; 7; 8

‘

No 13a

sizes 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2''

No 4025

sizes 4; 6; 8

No 1220 No 1221 No 1222 No 1223

size 0 size 1 size 2 size 3

No 13008

sizes 0; 1; 2; 3; 4; 5; 6

No 13010

sizes 0; 1; 2; 3; 4; 5; 6; 8; 10

No 4006/1

1/4''

No 4622

size 1 (1.0 x 5.5 x 100 mm); size 3 (1.2 x 8.0 x 150 mm); size 4 (1.6 x 10.0 x 175 mm)

‘

No 65 01 5 160 ‘

‘

No 65 11 5 135 ‘

No 65 32 5 170 ‘

No 65 36 5 160

‘

No 66 04 6 110

‘

No 4632

No 66 06 6 130 ‘

No 66 23 5 160 ‘

sizes 1; 2; 3

No 12900

‘

1/16; 5/64; 3/32;

No 10760aCV/13 sizes 0.028; 0.035; 0.050; 7/64; 1/8; 9/64; 5/32; 3/16; 7/32; 1/4''

No 10971 ‘

No 12921N ‘

O 50 mm

‘

No 65 01 5 180

No 13100

‘ ‘

No 65 10 5 190

No 13135

‘ ‘

No 65 51 6 240

Drip oiler

‘

No 65 76 5 231

Magnetic lifter

‘ ‘

No 66 00 5 180 ‘

Electronics tweezers ‘

No 12320 ‘

Electronics tweezers ‘

No 13126

Extractor hook set

‘

No 13209 ‘

Test equipment set for safety applications ‘

Universal soldering iron

No 12035

210 mm

No 12036

260 mm

No 12050

465 mm

No 12200

145 mm

‘

Solder

‘

Solder removing pump, antistatic ‘

‘

Blade holders with blades ‘

‘

Lamp extractor

No 12378

‘

Magnifying glass

No 12752R

‘

2 Screwdrivers ‘

No 12800

Tweezers

‘

No 12900N

Stripper

‘

No 12931

No 13110

300 mm

‘

Set of soldering tools

‘

Solder removing wire

13213a

‘

Hand vice

130 Tools

‘

Inspection mirror, insulated, O 40 mm

‘

Engine mechanics set

‘

Code

R kg

€

12.1

2350.55

‘

97 84 60 10

No 13209

‘

13211a

Sheetmetal set

No 13a No 130a

sizes 19/32; 5/8; 11/16; 3/4'' sizes 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16''

No 24

sizes 1/4 x 5/16; 5/16 x 3/8; 3/8 x 7/16; 1/2 x 9/16; 5/8 x 3/4''

No 230a

sizes 1/4 x 5/16; 5/16 x 3/8; 3/8 x 7/16; 7/16 x 1/2; 1/2 x 9/16; 9/16 x 5/8; 5/8 x 3/4; 11/16 x 3/4''

No 405

1/4''

D a sizes 10; 14

No 413

1/4''

No 415SGB

1/4''

No 40aD/30/7QR

No 45a/22/8QR

3/8'' a No 45a: sizes 1/4; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16; 5/8; 11/16; 3/4; 13/16; 7/8; 15/16; 1'' No 47a: sizes 5/16; 3/8; 7/16; 1/2; 9/16; 5/8; 11/16; 3/4''

‘

53 Tools ‘ ‘

R kg

Code

€

‘

97 84 60 08

801.80

‘

‘ ‘

1/4

5/16; 3/8

7/16; 1/2

9/16''

No 10a

sizes

No 13a

sizes 7/32; 11/32''

No 230a

sizes 1/4 x 5/16; 3/8 x 7/16; 1/2 x 9/16''

No 4025

size 8

No 442 No 443

1/4'' b 3/8'' a 5/16'' b 3/8'' a

No 453

3/8''

No 103

150 mm

No 104-5/6D

No 104/120 x 2; 120 x 3; 120 x 4; 120 x 5; 120 x 6 mm No 105/120 mm

No 104

120 x 8 mm

No 108/6D

No 108/150 x 2.5; 150 x 3; 150 x 4; 150 x 5; 150 x 6; 150 x 8 mm

‘ ‘

‘

1/4''

‘

No 427/10QR; 427/6QR; 427/3QR; 428QR; 435SG-QR; 442; 443; 453

‘

No 109

sizes 1; 2; 3; 4; 5

No 4622

size 1 (1.0 x 5.5 x 100 mm); size 2 (1.2 x 6.5 x 125 mm); size 4 (1.6 x 10.0 x 175 mm); size 5 (2.0 x 12.0 x 200 mm)

No 4631

sizes 1; 2

No 4632

sizes 1; 2; 3

‘

No 4622

size 1 (1.0 x 5.5 x 100 mm); size 3 (1.2 x 8.0 x 150 mm); size 4 (1.6 x 10.0 x 175 mm); size 6 (2.5 x 14.0 x 250 mm)

‘

‘ ‘

No 4630

sizes 1; 2; 3

No 4734

size 2

‘ ‘

No 10760aCV/10Pc sizes 1/16; 5/64; 3/32; 1/8; 5/32; 3/16; 7/32; 1/4; 5/16; 3/8''

‘

No 65 01 6 180 ‘

No 65 64 2 175 ‘

‘

No 66 02 6 160 ‘

No 10670

265 mm

No 10955

32 mm O

No 10970

3/4;

No 12025

210 mm

No 12030

260 mm

No 65 16 5 200 ‘

‘

1 1/2 lb.

No 65 31 5 170 ‘

No 65 51 6 240 ‘

‘

Continuation next page 29

Tool trolleys, Tool boxes, Sets No 65 75 1 220

No 405QR/2

1/4''

D a 54 mm

No 405QR/6

1/4''

D a 150 mm

No 407QR

1/4''

D a 38 mm

No 409M

3/8''

D 1/4'' a

No 415QR

1/4''

No 415SGB

1/4''

No 412

1/4''

No 45

a sizes 15; 17; 19; 21; 22; 24 mm

No 46

3/8''

a sizes 15; 17; 19; 21 mm

No 427QR/3

3/8''

D a 76 mm

No 427QR/10

3/8''

D a 240 mm

No 428QR

3/8''

D a 46 mm

No 431

1/4''

D 3/8'' a

No 432M

1/2''

D 3/8'' a

No 435QR

3/8''

No 443

5/16''

No 453

3/8''

‘

No 66 00 5 160

‘

No 10960

300 g

No 11097/22

4–25/1000''

‘

No 12600

500 g

‘

No 12900N ‘

No 12921N ‘

13214

O 50 mm

‘

Line maintenance set in tool box No 13216/4

ö xU

3/8''

‘

for maintenance on aeroplanes and helicopters, 121 Tools

‘

‘ ‘

R kg

Code

€

‘

98 81 48 03

27.5

2620.70

‘

b 3/8'' a

No 4000 ‘

No 104

120 x 2; 120 x 3; 120 x 4; 120 x 5 mm

No 109

sizes 2; 5

No 4622

size 1 (1.0 x 5.5 x 100 mm); size 3 (1.2 x 8.0 x 150 mm)

No 4632

sizes 1; 2; 3

No 10767/9

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

‘

No 65 16 5 200 ‘

No 65 32 5 170 ‘

No 65 51 6 240 ‘

No 65 64 2 175 ‘

No 65 75 1 220 ‘

No 66 00 5 160 ‘

No 10956

O 35 mm

No 10960

500 g

No 11095/20

0.05–1 mm

‘

No 12053 ‘

No 12320 ‘

No 13

sizes 5.5; 6; 7; 8; 9; 10; 12; 13; 14; 15; 17; 19; 20; 21; 22; 24; 27; 30 mm

‘

No 12321 ‘

No 12600

270 g

‘

No 16

sizes 3.2; 3.5; 4; 4.5; 5 mm

No 25

sizes 7 x 8; 9 x 10; 12 x 13; 17 x 19 mm

No 12900

‘ ‘

a sizes 4; 4.5 mm

No 40

1/4''

No 40D

1/4'' a sizes 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm

‘

a size 4.5 mm 1/4'' a sizes 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm

O 50 mm

No 12922E

O 6 mm

No 12931

‘

No 13126

‘

No 40L No 40DL

No 12921N ‘

‘

1/4''

No 8050 ‘

‘

No 402 ‘

1/4''

a sizes 6; 7; 8; 9; 10 mm No 13216/4 ‘

size 6 (4x); size 12 (6x)

13214a

Line maintenance set in tool box No 13216/4

No 427QR/3

3/8''

D a 76 mm

No 427QR/10

3/8''

D a 240 mm

No 428QR

3/8''

D a 46 mm

No 431

1/4''

D 3/8'' a

No 432M

1/2''

D 3/8'' a

No 435QR

3/8''

No 443

5/16''

No 453

3/8''

‘

ö x

‘

for maintenance on aeroplanes and helicopters, 122 Tools ‘

‘

Code

R kg

€

27.2

2596.35

‘

98 81 48 01 ‘

‘

b 3/8'' a

No 4000 ‘

No 104

120 x 2; 120 x 3; 120 x 4; 120 x 5 mm

No 109

sizes 2; 5

No 4622

size 1 (1.0 x 5.5 x 100 mm); size 3 (1.2 x 8.0 x 150 mm)

No 4632

sizes 1; 2; 3

No 10767a/13

sizes 0.050; 1/16; 5/64; 3/32; 7/64; 1/8; 9/64; 5/32; 3/16; 7/32; 1/4; 5/16; 3/8''

‘

No 65 16 5 200 ‘

No 65 32 5 170 ‘

No 65 51 6 240 ‘

No 65 64 2 175 ‘

No 65 75 1 220 ‘

No 66 00 5 160 ‘

No 10956

O 35 mm

No 10960

500 g

No 11095/20

0.05–1 mm

‘

No 12053 ‘

No 12320 ‘

No 12321 ‘

No 13a

sizes 3/16; 13/64; 7/32; 15/64; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16; 19/32; 5/8; 11/16; 3/4; 25/32; 13/16; 7/8; 15/16; 1; 1 1/16; 1 1/8''

No 12600 No 12900 ‘

‘

No 25a

sizes 1/4 x 5/16; 5/16 x 11/32; 3/8 x 7/16; 1/2 x 9/16''

270 g

‘

No 12921N

O 50 mm

No 12922E

O 6 mm

No 12931

‘

No 40aD

a sizes 3/16; 7/32; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16'' 1/4''

‘

a sizes 3/16; 7/32; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16''

No 40aDL

1/4''

No 402a

1/4''

a sizes 1/4; 5/16; 3/8; 7/16; 1/2''

No 405QR/2

1/4''

D a 54 mm

No 405QR/6

1/4''

D a 150 mm

No 407QR

1/4''

D a 38 mm

No 409M

3/8''

D 1/4'' a

No 415QR

1/4''

No 415SGB

1/4''

No 412

1/4''

No 45a

3/8''

a sizes 1/2; 9/16; 19/32; 5/8; 11/16; 3/4; 1''

No 13126 ‘

‘

No 8050

size 6 (4x); size 12 (6x)

‘

No 13216/4 ‘

‘

15/16; ‘

No 46a ‘

3/8''

a sizes 5/8; 11/16; 3/4; 7/8'' 31

Tool trolleys, Tool boxes, Sets 13214a WW Line maintenance set

No 4000 ‘

ö x 1

No 104

120 x 2; 120 x 3; 120 x 4; 120 x 5 mm

No 109

sizes 2; 5

No 4622

size 1 (1.0 x 5.5 x 100 mm); size 3 (1.2 x 8.0 x 150 mm)

No 4632

sizes 1; 2; 3

No 10767a/13

sizes 0.050; 1/16; 5/64; 3/32; 7/64; 1/8; 9/64; 5/32; 3/16; 7/32; 1/4; 5/16; 3/8''

‘

for maintenance on aeroplanes and helicopters, 122 Tools, in TCS inlays (Tool Control System see page 44–59), 4x3/3 inlays for 4 drawers, suitable for Workbench No 92KM G, Tool trolley 97N, 97N/KM, 97H/8; 97H/KM; Tool boxes No 94N, 94N/KM, Magazine case No 920 and Wheely box No 922N.

‘

R kg

Code

€

‘

97 83 08 02

12.54

‘

2054.35

‘

No 65 16 5 200 ‘

No 65 32 5 170 ‘

No 65 51 6 240 ‘

No 65 64 2 175 ‘

No 65 75 1 220 ‘

No 66 00 5 160 96 83 08 85

96 83 08 86

‘

No 10956

O 35 mm

No 10960

500 g

No 11095/20

0.05–1 mm

‘

No 12053 ‘

No 12320 96 83 08 87

96 83 08 88

‘

No 12321 ‘

No 13a

sizes 3/16; 13/64; 7/32; 15/64; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16; 19/32; 5/8; 11/16; 3/4; 25/32; 13/16; 7/8; 15/16; 1; 1 1/16; 1 1/8''

‘

No 12600 No 12900 ‘

No 25a

sizes 1/4 x 5/16; 5/16 x 11/32; 3/8 x 7/16; 1/2 x 9/16'' a sizes 3/16; 7/32; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16''

No 40aD

1/4''

No 40aDL

1/4''

‘

No 402a

1/4''

a sizes 1/4; 5/16; 3/8; 7/16; 1/2''

No 405QR/2

1/4''

D a 54 mm

No 405QR/6

1/4''

D a 150 mm

No 407QR

1/4''

D a 38 mm

No 409M

3/8''

D 1/4'' a

No 415QR

1/4''

No 415SGB

1/4''

No 412

1/4''

No 45a

3/8''

a sizes 1/2; 9/16; 19/32; 5/8; 11/16; 3/4; 1''

‘

15/16; ‘

No 46a

3/8''

a sizes 5/8; 11/16; 3/4; 7/8''

No 427QR/3

3/8''

D a 76 mm

No 427QR/10

3/8''

D a 240 mm

No 428QR

3/8''

D a 46 mm

No 431

1/4''

D 3/8'' a

No 432M

1/2''

D 3/8'' a

No 435QR

3/8''

No 443

5/16''

No 453

3/8''

‘

b 3/8'' a

O 50 mm

No 12922E

O 6 mm

No 12931

‘

a sizes 3/16; 7/32; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16''

No 12921N ‘

‘

270 g

‘

No 13126 ‘

The modular tool tray system Standard – the perfectly organised workshop Tool trays from STAHLWILLE ensure perfect tool

STAHLWILLE system provide the security and

management within the Tool Trolley or Tool Box.

efficiency required for smooth workflows and

All the tools are neatly arranged and instantly at

reliable quality.

hand, and always securely held in the same place. The Tool Trolley or Tool Box can be

The drawers of the Tool Trolleys can be optimally

equipped as required with 1/6, 1/3, 2/3 or

used if a number of spare inlays are kept in store

3/3 inlays.

to enable the perfect “for task” combination of tools. In addition, these inlays are made of

Wherever large numbers of tools are in constant

skydrol resistant and permanently oil resistant

use and rapid, unhindered access is paramount,

engineering plastic and the sculpted cutouts

the inlays in this tried-and-tested modular

protect your high-grade, expensive tools.

Proven in practice – over and over again: our TCS and Standard inlays will all fit the CONVERTA system

Tool trolleys, Tool boxes, Sets

Tool sets in plastic inlays for Workbench No 92KM G, Tool trolleys No 97N, 97N/KM, 97H/8, 97H/KM; Tool boxes No 94N, 94N/KM; Magazine case No 920 and Wheely box No 922N (Modular system)

No 400

1/4''

D 150 mm

No 404

1/4''

D 116 mm

No 405/2

1/4''

D a 54 mm

No 405/6

1/4''

D a 150 mm

No 407

1/4''

D a 38 mm

No 412

1/4''

No 415

1/4''

No 10760CV

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10; 12 mm

No 52

1/2'' a sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 27; 30; 32 mm

No 506

1/2''

D 300 mm

No 509/2

1/2''

D a 52 mm

No 509/5

1/2''

D a 130 mm

No 509/10

1/2''

D a 255 mm

No 510

1/2''

D a 71 mm

No 512

1/2''

No 4620

size 1 (0.6 x 3.5 x 75 mm); size 2 (0.8 x 4.0 x 100 mm); size 3 (1.0 x 5.5 x 125 mm); size 4 (1.2 x 6.5 x 150 mm) size 5 (1.6 x 8.0 x 175 mm)

No 4630

sizes 1; 2; 3

‘

806/10

Tool set ‘

99 Tools, in plastic inlays (modular system see page 33–43), 9x1/3 and 1x3/3 inlays for 4 drawers, suitable for Workbench No 92KM G, Tool trolleys No 97N, 97N/KM, 97H/8, 97H/KM; Tool boxes No 94N, 94N/KM, Magazine case No 920 and Wheely box No 922N.

‘

‘ ‘

R kg

Code

€

‘

1054.50

‘

98 83 00 01

13.35

‘ ‘

‘

96 83 81 26

96 83 81 27 ‘

‘

No 65 01 5 180 ‘

No 65 29 5 200 ‘

No 65 43 4 002 ‘

96 83 81 28

96 83 81 10

No 65 45 4 002 ‘

No 65 51 6 240 ‘

No 65 64 2 250 ‘

No 66 02 5 160 ‘

96 83 81 12

96 83 81 13

No 102

175 mm

No 108

150 x 6; 175 x 6 mm

No 109

size 6; 100 x 3.4 mm

No 10956

O 35 mm

No 10960

500 g

‘

96 83 82 37

96 83 81 21

96 83 81 23

96 83 81 25

No 10

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 24 x 27; 30 x 32 mm

No 13

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24 mm

No 40

1/4'' a sizes 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm

‘

808/9

Tool set

102 Tools, in plastic inlays (modular system see page 33–43), 9x1/3 and 1x3/3 inlays for 4 drawers, suitable for Workbench No 92KM G, Tool trolleys No 97N, 97N/KM, 97H/8, 97H/KM; Tool boxes No 94N, 94N/KM, Magazine case No 920 and Wheely box No 922N.

No 456

3/8'' a sizes 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22 mm

No 425

3/8''

D 165 mm

No 427/3

3/8''

D a 76 mm

No 427/6

3/8''

D a 160 mm

No 427/10

3/8''

D a 240 mm

No 428

3/8''

D a 46 mm

No 435

3/8''

No 4620

size 1 (0.6 x 3.5 x 75 mm); size 2 (0.8 x 4.0 x 100 mm)

No 4622

size 1 (1.0 x 5.5 x 100 mm); size 2 (1.2 x 6.5 x 125 mm); size 3 (1.2 x 8.0 x 150 mm)

No 4632

sizes 1; 2; 3

‘

Code

R kg

€

11.7

1052.80

‘

98 83 00 02

‘

96 83 81 30

96 83 81 05

No 65 01 5 200 ‘

No 65 29 5 160 ‘

No 65 43 4 002 ‘

No 65 45 4 002 ‘

96 83 81 06

96 83 81 10

No 65 51 6 240 ‘

No 65 64 2 250 ‘

No 66 02 5 160 ‘

No 102

175 mm

No 105

120 x 12 mm

No 108

150 x 2.5; 150 x 3; 150 x 4; 150 x 5; 150 x 6; 150 x 8 mm

No 10956

O 35 mm

No 10970

1 lb.

‘

96 83 81 11

96 83 82 38

‘

96 83 81 32

96 83 81 24

96 83 81 31

No 10

sizes 5.5 x 7; 8 x 10; 10 x 12; 11 x 13; 12 x 14; 14 x 17; 17 x 19; 18 x 21; 19 x 22; 22 x 24 mm

‘

No 14

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24 mm

No 40

1/4'' a sizes 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm

The modular tool tray system 1/6 tray (175 x 175 mm)

1/3 tray (175 x 350 mm)

2/3 tray (350 x 350 mm)

3/3 tray (530 x 350 mm)

‘

No 400

1/4''

D 150 mm

No 404

1/4''

D 116 mm

No 405/2

1/4''

D a 54 mm

No 405/6

1/4''

D a 150 mm

No 407

1/4''

D a 38 mm

No 412

1/4''

No 415

1/4''

No 10760CV

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10; 12 mm

‘

Tool trolleys, Tool boxes, Sets ES 10/10, 5.5x7–22x24 mm

ES 13/5, 27–32 mm

175 x 350 x 60 mm, 10 pieces ‘

R g

Code

€

‘

96 83 81 30

1100

78.25

‘

530 x 350 x 30 mm, 5 pieces ‘

R g

Code

€

‘

No 10

sizes 5.5 x 7; 8 x 10; 10 x 12; 11 x 13; 12 x 14; 14 x 17; 17 x 19; 18 x 21; 19 x 22; 22 x 24 mm

96 83 81 04

Empty tray

106

150.40

‘

No 13

sizes 27; 28; 29; 30; 32 mm

‘

83 81 20 33

2280

8.10

‘

83 81 20 40

Empty tray

287

21.60

‘

ES 14/10, 6–15 mm

ES 10/10, 6x7–30x32 mm

175 x 350 x 39 mm, 10 pieces

175 x 350 x 70 mm, 10 pieces

‘ ‘

R g

Code

€

‘

96 83 81 26

1515

78.35

Code

R g

€

700

87.45

‘

96 83 81 05 ‘

‘

No 10

No 14

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 24 x 27; 30 x 32 mm

83 81 20 34

Empty tray

112

Empty tray

110

8.15

‘

83 81 20 22

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15 mm

‘

8.15

‘

ES 14/8, 16–24 mm ES 13/10, 6–15 mm

175 x 350 x 51 mm, 8 pieces ‘

175 x 350 x 40 mm, 10 pieces ‘

Code

€

525

82.40

€

‘

96 83 81 27

R g

Code

R g

‘

96 83 81 06

1820

122.95

‘

No 14

sizes 16; 17; 18; 19; 20; 21; 22; 24 mm

‘

No 13

83 81 20 35

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15 mm

Empty tray

112

8.15

‘

83 81 20 23

Empty tray

105

8.15

ES 20/8, 6x7–19x22 mm

‘

ES 13/8, 16–24 mm

175 x 350 x 30 mm, 8 pieces ‘

175 x 350 x 54 mm, 8 pieces

R g

Code R g

Code ‘

96 83 81 28

1440

96 83 81 67 €

1266 No 20

119.95

No 13

sizes 16; 17; 18; 19; 20; 21; 22; 24 mm

‘

Empty tray

112

8.15

98.45

‘

83 81 20 24

€

‘

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 21; 19 x 22 mm

‘

83 81 20 83 ‘

Empty tray

103

8.35

ES 20/10, 6x7–30x32 mm

ES 10750/10, 6x7–20x22 mm

175 x 350 x 30 mm, 10 pieces ‘

530 x 350 x 44 mm, 10 pieces

R g

Code

‘

R g

Code

€

‘

96 83 81 07

2620

€

‘

96 83 81 68

1132

90.80

‘

152.90

No 10750

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22 mm

No 10750 1/2

sizes 6; 7

‘ ‘

No 20

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 24 x 27; 30 x 32 mm

‘

83 81 20 84

Empty tray

103

8.35

R g

€

‘

83 81 20 44

Empty tray

309

21.60

ES 10751/10, 6x7–20x22 mm

‘

ES 24/7, 8x10–19x22 mm

175 x 350 x 30 mm, 10 pieces ‘

175 x 350 x 30 mm, 7 pieces

Code

‘

R g

Code ‘

96 83 81 71

835

‘

€

96 83 81 69

1586

123.55

No 10751

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22 mm

No 10750 1/2

sizes 6; 7

‘

No 24

sizes 8 x 10; 10 x 11; 11 x 13; 12 x 14; 14 x 17; 17 x 19; 19 x 22 mm

‘

83 81 20 86

Empty tray

103

8.35

‘

210.25

‘

83 81 20 84

Empty tray

103

8.35

‘

ES 25/7, 7x8–17x19 mm

ES TX/32

175 x 350 x 30 mm, 7 pieces

175 x 350 x 40 mm, 32 pieces

‘

R g

Code ‘

96 83 81 08

1040

‘

€ 154.55

‘

Code

R g

€

931

249.15

‘

96 83 81 66 ‘

No 25

sizes 7 x 8; 9 x 10; 10 x 11; 12 x 13; 14 x 15; 16 x 18; 17 x 19 mm

No 21TX

sizes E6 x E8; E10 x E12; E14 x E18; E20 x E24

No 45TX

3/8''

a sizes E8; E10; E12; E14

No 50TX

1/2''

a sizes E16; E18; E20

No 412

1/4''

No 442

1/4''

b 3/8'' a

‘

83 81 20 38

Empty tray

111

8.15

‘

‘ ‘

ES 29/6, 8x9–18x19 mm

‘

175 x 350 x 30 mm, 6 pieces ‘

R g

Code ‘

96 83 81 09

1185

€

5/16''

No 1440 No 1441 No 1442 No 1443 No 1444 No 1445

size T10 size T15 size T20 size T25 size T27 size T30

No 1432 No 1433 No 1434

size T40 size T45 size T50

No 10766/9

sizes T8; T9; T10; T15; T20; T25; T27; T30; T40

‘

198.35

‘

No 29

sizes 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19 mm

‘

83 81 20 41

Empty tray

105

b 1/2'' a

No 543 ‘

8.15

‘ ‘

83 81 20 82

Empty tray

103

8.35

‘

Tool trolleys, Tool boxes, Sets ES 1/4'' + 10760CV

ES 1/2'' – 512/6

175 x 350 x 41 mm, 27 pieces

175 x 350 x 35 mm, 6 pieces

‘

R g

Code

€

‘

96 83 81 10

1035

174.25

‘

R g

Code

€

‘

96 83 81 13

1915

137.75

110

8.15

‘

No 40

a sizes 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm 1/4''

No 506

1/2''

D 300 mm

No 509/2

1/2''

D a 52 mm

No 509/5

1/2''

D a 130 mm

No 509/10

1/2''

D a 255 mm

No 510

1/2''

D a 71 mm

No 512

1/2''

‘

‘ ‘

No 400

1/4''

D 150 mm

No 404

1/4''

D 116 mm

No 405/2

1/4''

D a 54 mm

No 405/6

1/4''

D a 150 mm

No 407

1/4''

D a 38 mm

No 412

1/4''

No 415

1/4''

No 10760CV

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10; 12 mm

‘

83 81 20 29

Empty tray

‘

ES 54/54KK

‘

83 81 20 28

Empty tray

107

8.15

‘

ES 456/16/6

175 x 350 x 38 mm, 14 pieces ‘

R g

Code

€

‘

96 83 81 14

1630

161.25

‘

175 x 350 x 40 mm, 22 pieces

No 54

1/2'' a sizes 4; 5; 6; 7; 8; 10; 12; 14; 17; 19 mm

No 54KK

1/2''

‘

R g

Code ‘

€

‘

83 81 20 46

Empty tray

a sizes 5; 6; 8; 10 mm 108

8.15

R g

€

505

61.90

‘

96 83 81 11

1555

230.30

‘

No 456

3/8'' a sizes 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22 mm

No 425

3/8''

D 165 mm

No 427/3

3/8''

D a 76 mm

No 427/6

3/8''

D a 160 mm

No 427/10

3/8''

D a 240 mm

No 428

3/8''

D a 46 mm

No 435

3/8''

ES 54KK/5

‘

175 x 175 x 30 mm, 5 pieces ‘

Code ‘

83 81 20 32

Empty tray

103

8.15

‘

96 83 81 65 ‘

No 54KK

ES 52/17

‘

83 81 20 51 ‘

175 x 350 x 47 mm, 17 pieces ‘

R g

Code ‘

96 83 81 12

1760

€ 130.10

‘

No 52

a sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 27; 30; 32 mm 1/2''

‘

83 81 20 30 ‘

Empty tray

107

8.15

Empty tray

1/2''

a sizes 5; 6; 7; 8; 10 mm 55

4.00

ES 1054/2054

ES 55/6/4

175 x 175 x 30 mm, 6 pieces ‘

Code

R g

€

900

69.00

‘

96 83 81 64 ‘

No 1054 No 2054 ‘

83 81 20 81

a sizes 8; 10; 12 mm 1/2'' a sizes 5; 6; 14 mm 55

‘

R g

Code

€

‘

1/2''

Empty tray

530 x 350 x 83 mm, 10 pieces

96 83 81 74

7875

383.00

‘

4.10

No 55

3/4''

a sizes 34; 36; 41; 46; 50; 55 mm

No 552

3/4''

No 556

3/4''

No 558

510 mm

No 559/8

3/4''

‘

ES 54X/54TX ‘

‘

83 81 20 89

Empty tray

D a 200 mm 298

23.40

‘

ES 2309/4

175 x 350 x 38 mm, 16 pieces ‘

R g

Code

€

‘

96 83 81 15

1600

198.75

‘

No 54X

a sizes M5; M6; M8; M10; M12; M14; M16

No 54TX

a sizes T20; T25; T27; T30; T40; T45; T50; T55; T60

1/2''

‘

1/2''

‘

83 81 20 45

Empty tray

111

8.15

‘

175 x 175 x 40 mm, 4 pieces ‘

R g

Code

€

‘

96 83 81 62

1145

113.90

‘

No 2309

ES 1054/2054TX/6

a sizes 17; 19; 20.8 mm-13/16''; 22 mm

1/2''

‘

83 81 20 80

Empty tray

4.10

R g

€

800

105.10

‘

ES 2309K/3 175 x 175 x 30 mm, 6 pieces ‘

Code

R g

€

950

84.80

‘

96 83 81 63 ‘

No 1054TX No 2054TX ‘

83 81 20 81

Empty tray

175 x 175 x 30 mm, 3 pieces

a sizes T30; T50; T55; T60 1/2'' a sizes T40; T45 1/2''

‘

4.10

Code ‘

‘

96 83 82 60 ‘

No 2309K ‘

83 81 20 80

Empty tray

1/2''

a sizes 17; 19; 20.8 mm-13/16'' 55

4.10

‘

Tool trolleys, Tool boxes, Sets ES 721/15/3/2

ES 4620/4622/4632/8

175 x 350 x 39 mm, 8 pieces ‘

530 x 350 x 40 mm, 6 pieces Code

‘

R g

Code

€

‘

96 83 81 72

5012

R g

€

770

78.30

‘

96 83 82 38 ‘

529.90

No 4620

size 1 (0.6 x 3.5 x 75 mm); size 2 (0.8 x 4.0 x 100 mm)

No 4622

size 1 (1.0 x 5.5 x 100 mm); size 2 (1.2 x 6.5 x 125 mm); size 3 (1.2 x 8.0 x 150 mm)

No 4632

size 1; 2; 3

‘

a sizes 17; 19; 20.8 mm-13/16''

No 2309K

1/2''

No 721/15

30–150 N m

‘

‘ ‘

No 35c cars ‘

17; 19; 22; D 1/2''

‘

83 81 21 02

Empty tray

111

8.15

R g

€

865

84.20

‘

No 10599/2

245 mm

ES 4622–4734/9

‘

83 81 20 87

Empty tray

299

22.30

‘

ES 4620/4628/4630/7

175 x 350 x 39 mm, 9 pieces ‘

Code

175 x 350 x 39 mm, 7 pieces

‘

96 83 82 34

‘

Code

R g

€

530

48.65

‘

96 83 82 36

‘

No 4622

size 1 (1.0 x 5.5 x 100 mm); size 2 (1.2 x 6.5 x 125 mm); size 3 (1.2 x 8.0 x 150 mm); size 4 (1.6 x 10.0 x 175 mm)

No 4628

size 1 (0.4 x 2.5 x 60 mm)

No 4632

sizes 1; 2

No 4724

size 2 (1.0 x 5.5 x 25 mm)

No 4734

size 2

‘

No 4620

size 1 (0.6 x 3.5 x 75 mm); size 2 (0.8 x 4.0 x 100 mm); size 3 (1.0 x 5.5 x 125 mm); size 4 (1.2 x 6.5 x 150 mm)

‘

No 4628

size 1 (0.4 x 2.5 x 60 mm)

No 4630

sizes 1; 2

‘

83 81 21 01

Empty tray

8.15

‘

83 81 21 03

Empty tray

100

8.15

‘

ES 4622SK/4632SK/6

ES 4620/4630/8

175 x 350 x 39 mm, 6 pieces

175 x 350 x 39 mm, 8 pieces

‘

R g

Code ‘

96 83 82 37

770

€ 66.70

‘

No 4620

size 1 (0.6 x 3.5 x 75 mm); size 2 (0.8 x 4.0 x 100 mm); size 3 (1.0 x 5.5 x 125 mm); size 4 (1.2 x 6.5 x 150 mm); size 5 (1.6 x 8.0 x 175 mm)

Code

R g

€

770

77.80

‘

96 83 82 19 ‘

No 4622SK

size 1 (0.8 x 4.0 x 90 mm); size 2 (1.0 x 5.5 x 100 mm); size 3 (1.2 x 6.5 x 125 mm); size 4 (1.2 x 8.0 x 150 mm)

No 4632SK

sizes 1; 2

‘

‘ ‘

No 4630

sizes 1; 2; 3

83 81 21 06

‘

83 81 21 02 ‘

‘

Empty tray

111

8.15

Empty tray

111

8.15

ES 4650/9

ES 4820/4830/8

175 x 350 x 39 mm, 9 pieces R g

Code ‘

96 83 82 17 ‘

No 4650

‘

€

645 79.90 sizes T8; T9; T10; T15; T20; T25; T27; T30; T40

Code

Empty tray

100

R g

€

735

78.00

‘

96 83 81 35 ‘

No 4820

0.6 x 3.5 x 75 mm; 0.8 x 4.0 x 100 mm; 1.0 x 5.5 x 125 mm; 1.2 x 6.5 x 150 mm; 1.6 x 8.0 x 175 mm

No 4830

sizes 1; 2; 3

‘

83 81 21 04

175 x 350 x 30 mm, 8 pieces

‘

8.15

‘ ‘

‘

ES 4656/9

83 81 20 68

Empty tray

110

8.40

‘

ES 4856/9

175 x 350 x 39 mm, 9 pieces ‘

Code

R g

€

645

93.60

‘

96 83 82 18 ‘

No 4656

sizes T8; T9; T10; T15; T20; T25; T27; T30; T40

‘

83 81 21 04

Empty tray

100

8.15

‘

175 x 350 x 30 mm, 9 pieces ‘

Code 96 83 81 36

€

705

107.10

‘

No 4856

ES 4660/4665 VDE/6

R g

‘

sizes T8; T9; T10; T15; T20; T25; T27; T30; T40

‘

83 81 20 67

Empty tray

110

8.35

‘

ES 12500N/7 175 x 350 x 39 mm, 6 pieces ‘

Code

R g

€

525

51.50

‘

96 83 82 35 ‘

No 4660 VDE

size 1 (0.4 x 2.5 x 75 mm); size 3 (0.6 x 3.5 x 100 mm); size 5 (1.0 x 5.5 x 125 mm); size 6 (1.2 x 6.5 x 150 mm)

175 x 350 x 39 mm, 7 pieces ‘

R g

Code ‘

96 83 82 00

1060

€ 96.00

‘

No 4665 VDE

No 12500N

sizes 1; 2

sizes 7; 8; 9; 10; 11; 12; 13 mm

‘

83 81 21 05

Empty tray

8.15

83 81 30 85

Empty tray

103

8.35

‘

ES 10768/6

ES 4820/4830/6

175 x 350 x 33 mm, 6 pieces ‘

Code

R g

€

480

52.90

‘

96 83 81 34

350 x 350 x 37 mm, 6 pieces ‘

‘

No 4820

0.6 x 3.5 x 75 mm; 0.8 x 4.0 x 100 mm; 1.0 x 5.5 x 125 mm; 1.2 x 6.5 x 150 mm

Code

R g

€

780

62.40

‘

96 83 81 19 ‘

‘

No 4830

No 10768

sizes 1; 2

sizes 3; 4; 5; 6; 8; 10 mm

‘

83 81 20 66

Empty tray

111

8.10

83 81 20 42

Empty tray

209

15.80

‘

Tool trolleys, Tool boxes, Sets ES 10769/7

ES 6501–6602/7B

175 x 350 x 35 mm, 7 pieces 530 x 350 x 40 mm, 7 pieces

‘

Code

R g

€

450

54.80

‘

96 83 81 20 ‘

No 10769

96 83 81 32

sizes T10; T15; T20; T25; T27; T30; T40

Empty tray

116

€

2055

169.30

307

22.50

‘

No 65 01 5 200

‘

83 81 20 43

R g

Code ‘

8.15

‘

No 65 29 5 160 ‘

ES 10769B/7

No 65 43 4 002 ‘

No 65 45 4 002 ‘

No 65 51 6 240 ‘

No 65 64 2 250 ‘

175 x 350 x 35 mm, 7 pieces

No 66 02 5 160

‘

Code

R g

€

450

56.55

‘

96 83 81 29

83 81 20 21 ‘

ES 6543–6546/4

‘

No 10769B

Empty tray

sizes T10; T15; T20; T25; T27; T30; T40

‘

83 81 20 43

Empty tray

116

8.15

‘

ES 6501–6602/7A 175 x 350 x 30 mm, 4 pieces ‘

Code

R g

€

700

77.45

109

8.05

‘

96 83 81 22 ‘

No 65 43 4 002 ‘

530 x 350 x 40 mm, 7 pieces ‘

R g

Code ‘

96 83 81 21

2085

No 65 44 4 021 ‘

€ 172.70

No 65 45 4 002 ‘

‘

No 65 46 4 021

No 65 01 5 180

‘

83 81 20 37 No 65 29 5 200

Empty tray

‘

ES 102/108/109/4

No 65 43 4 002 ‘

No 65 45 4 002 ‘

No 65 51 6 240 ‘

No 65 64 2 250 ‘

175 x 350 x 30 mm, 4 pieces

No 66 02 5 160 ‘

83 81 20 21

‘

Empty tray

307

22.50

‘

Code

R g

€

555

45.35

115

8.15

‘

96 83 81 23 ‘

No 102

175 mm

No 108

150 x 6; 175 x 6 mm

No 109

size 6; 100 x 3.4 mm

‘

83 81 20 27 ‘

Empty tray

ES 102/105/108/8

ES 10956/10970/2

175 x 350 x 33 mm, 8 pieces

175 x 350 x 45 mm, 2 pieces

‘

Code

R g

€

900

60.35

‘

96 83 81 24 ‘

No 102

175 mm

No 105

120 x 12 mm

No 108

150 x 2.5; 150 x 3; 150 x 4; 150 x 5; 150 x 6; 150 x 8 mm

1 R g

Code ‘

96 83 81 31

€

1075

51.55

114

8.15

‘

No 10956

O 35 mm

No 10970

1 lb.

‘

83 81 20 25

Empty tray

‘

83 81 20 36

Empty tray

114

8.15

‘

Empty inlay ES 10670–13110/11

175 x 350 x 30 mm

530 x 350 x 35 mm, 11 pieces ‘ ‘

R g

Code ‘

96 83 81 73

2120

€ 159.95

Code

R g

€

110

8.15

R g

€

4.10

‘

83 81 20 47 ‘

‘

No 10670

265 mm

No 12025

210 mm

Empty inlay

No 12030

260 mm

175 x 175 x 28 mm

No 12035

210 mm

No 12036

260 mm

No 12050

465 mm

‘

No 12320 ‘

No 12321 ‘ ‘

No 12377 ‘

Code ‘

No 12931

No 13110

300 mm

83 81 20 80 ‘

‘

83 81 20 88

Empty tray

301

22.30

‘

ES 10956/10960/2

175 x 350 x 45 mm, 2 pieces ‘

R g

Code ‘

96 83 81 25

€

1130

46.95

114

8.15

‘

No 10956

O 35 mm

No 10960

500 g

‘

83 81 20 25

Empty tray

‘

The modular tool tray system Tool Control System – built-in safety!

Initially, the TCS Tool Control System was

The advantages at a glance

developed by STAHLWILLE in conjunction with

With our Tool Control System, the tools are

British Aerospace MAD for the aerospace

arranged in chemical-resistant special foam

industry with a view to improving safety. Today,

inlays with sculpted three-dimensional cut-outs.

the system is appreciated by employees in the automotive industry and other fields of industry

The signal colour is yellow. A glance is enough

and the trades for its convincing benefits. The

to see whether all tools are in their correct

system guarantees a high level of organisation

places: if you can see yellow, there is

and security, protects high-grade, expensive tools

something missing.

from damage and is ideal wherever large numbers of tools are prone to “disappear” – in other words, a real value-for-money investment that will soon pay for itself.

1. The sculpted cut-outs for each tool are individually shaped using computer technology to provide each tool with a secure place. Easy to remove thanks to additional recesses.

2. The sculpted cut-outs enable you to see at a glance where each tool goes. Saves time and money. 4. Two-layer, two-colour plastic inlays: the upper half is black and the lower layer is yellow.

3. The inlays are chemical-resistant and extremely flexible.

Tool sets in TCS inlays for Workbench No 92KM G, Tool trolleys No 97N, 97N/KM, 97H/8, 97H/KM, Tool boxes No 94N, 94N/KM, Magazine case No 920 and Wheely box No 922N

No 405/2

1/4''

D a 54 mm

No 405/6

1/4''

D a 150 mm

No 407

1/4''

D a 38 mm

No 412

1/4''

No 415

1/4''

No 10760CV

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10; 12 mm

No 52

1/2'' a sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 27; 30; 32 mm

No 506

1/2''

D 300 mm

No 509/2

1/2''

D a 52 mm

No 509/5

1/2''

D a 130 mm

No 509/10

1/2''

D a 255 mm

No 510

1/2''

D a 71 mm

No 512

1/2''

No 4620

size 1 (0.6 x 3.5 x 75 mm); size 2 (0.8 x 4.0 x 100 mm); size 3 (1.0 x 5.5 x 125 mm); size 4 (1.2 x 6.5 x 150 mm)

No 4630

sizes 1; 2; 3

‘

806/9 TCS

TCS tool set

ö x

‘

98 Tools, in TCS inlays (Tool Control System see page 44–59), 7x1/3, 1x2/3 and 1x3/3 inlays for 4 drawers, suitable for Workbench No 92KM G, Tool trolleys No 97N, 97N/KM, 97H/8; 97H/KM; Tool boxes No 94N, 94N/KM, Magazine case No 920 and Wheely box No 922N.

‘

R kg

Code

‘

€

‘

98 83 00 04

12.53

1135.15

‘

No 65 01 5 180 ‘

No 65 29 5 200 ‘

96 83 81 75

No 65 43 4 002

96 83 81 76 ‘

No 65 45 4 002 ‘

No 65 51 6 240 ‘

No 65 64 2 250 ‘

96 83 81 77

No 66 02 5 160

96 83 82 78 ‘

No 102

175 mm

No 108

150 x 6; 175 x 6 mm

No 109

size 6; 100 x 3.4 mm

No 10956

O 35 mm

No 10960

500 g

‘

96 83 81 79

96 83 81 80 ‘

Tool Control System The safety inlay system 96 83 81 81

Designed to fit our Tool Trolleys and Tool Boxes With yellow signal cut-outs to show whether all tools are in their places

96 83 81 82

96 83 81 83

No 10

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 24 x 27; 30 x 32 mm

No 13

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24 mm

No 40

1/4'' a sizes 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm

No 400

1/4''

D 150 mm

No 404

1/4''

D 116 mm

‘

Tool trolleys, Tool boxes, Sets TCS 10/10, 6x7–30x32 mm

TCS 10+13+24/30

ö x

530 x 350 x 75 mm, 30 pieces 350 x 350 x 30 mm, 10 pieces ‘ ‘

R g

Code

€

‘

R g

Code

€

‘

96 83 81 82

1414

96.80

‘

96 83 06 05

3724

351.45

‘

No 10

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 24 x 27; 30 x 32 mm

No 10

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 21 x 24 mm

No 13

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24; 27; 30; 32 mm

No 24

size 10 x 11 mm

‘

TCS 10/10, 6x7–30x32 mm MF

ö x

‘

TCS 10a/9

175 x 350 x 75 mm, 10 pieces ‘

R g

Code

€

‘

96 83 03 53

1437

ö x

96.45

‘

No 10

175 x 350 x 70 mm, 9 pieces

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 21; 19 x 22; 24 x 27; 30 x 32 mm

‘

R g

Code

‘

96 83 87 79

1555

€ 108.05

‘

TCS 10/10, 6x7–24x27 mm

sizes 1/4 x 5/16; 3/8 x 7/16; 1/2 x 9/16; 19/32 x 11/16; 5/8 x 3/4; 3/4 x 7/8; 25/32 x 13/16; 15/16 x 1; 1 1/8 x 1 5/16''

No 10a

ö x

‘

TCS 13/18, 6–24 mm

ö x

175 x 350 x 66 mm, 10 pieces ‘

R g

Code

€

‘

96 83 81 87

1287

84.90

‘

No 10

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 21 x 24; 24 x 27 mm

530 x 350 x 35 mm, 18 pieces ‘

‘

TCS 10/10, 6x7–24x27 mm MF

96 83 81 83

ö x

No 13 ‘

‘

R g

€

‘

96 83 03 58

1320

89.50

‘

No 10 ‘

1850

€ 217.25

‘

175 x 350 x 66 mm, 10 pieces Code

R g

Code ‘

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 21 x 24; 24 x 27 mm

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24 mm

TCS 13/17, 6–24 mm

TCS 13/25, 5.5–34 mm

ö x

530 x 350 x 75 mm, 25 pieces

350 x 350 x 60 mm, 17 pieces

‘

R g

‘

R g

Code ‘

96 83 01 64

1615

Code

€

‘

198.35

‘

96 83 20 96

No 13

4550 399.30 sizes 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 23; 24; 27; 29; 30; 32; 34 mm

No 13

‘

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24 mm

‘

€

‘

TCS 13/17, 6–24 mm MF

TCS 12+13+14/29

ö x

350 x 350 x 60 mm, 17 pieces

530 x 350 x 80 mm, 29 pieces

‘

R g

Code ‘

‘

€

R g

Code

€

‘

96 83 03 51

1552

207.35

‘

96 83 01 93

3752

389.65

‘

No 13

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24 mm

No 12

sizes 5.5; 12; 14 mm (2x)

No 13

sizes 7; 11 mm (2x); 6; 8; 9; 10; 12; 13; 14; 15; 16; 17; 18; 19; 20; 22; 24; 30; 32; 36 mm (1x)

No 14

size 17 mm

‘

TCS 13/21, 6–34 mm

ö x

‘

TCS 13a/19 530 x 350 x 75 mm, 21 pieces ‘

R g

Code ‘

96 83 01 74

3571

ö x

€ 318.95

‘

No 13 ‘

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24; 27; 30; 32; 34 mm

350 x 350 x 55 mm, 19 pieces ‘

R g

Code ‘

96 83 87 78

2000

€ 255.80

‘

No 13a

sizes 3/16; 7/32; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16; 19/32; 5/8; 11/16; 3/4; 25/32; 13/16; 7/8; 15/16; 1''

‘

Tool trolleys, Tool boxes, Sets TCS 13a/23

TCS 20/8, 6x7–19x22 mm MF

ö x

175 x 350 x 45 mm, 8 pieces ‘

R g

530 x 350 x 55 mm, 23 pieces Code

‘

R g

Code

€

‘

96 83 08 85

2726

96 83 03 56

1323 No 20

332.65

sizes 3/16; 13/64; 7/32; 15/64; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16; 19/32; 5/8; 11/16; 3/4; 25/32; 13/16; 7/8; 15/16;

113.30

‘

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 21; 19 x 22 mm

‘

No 13a

€

‘

1; 1 1/16; 1 1/8''

‘

TCS 20/10; 6x7–30x32 mm

ö x

TCS 14/5, 17–21 mm

ö x

175 x 350 x 30 mm, 5 pieces

350 x 350 x 45 mm, 10 pieces ‘

‘

R g

Code ‘

96 83 81 88

1065

€ 86.40

R g

Code

€

‘

96 83 01 66

2450

162.50

‘

No 14

No 20

sizes 17; 18; 19; 20; 21 mm

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 21; 19 x 22; 24 x 27; 30 x 32 mm

‘

TCS 14/8, 8–16 mm

ö x

TCS 25/7

ö x

175 x 350 x 30 mm, 8 pieces ‘

Code

€

660

87.90

‘

96 83 81 89

175 x 350 x 30 mm, 7 pieces

R g

‘

Code

R g

€

984

165.50

‘

No 14

sizes 8; 10; 11; 12; 13; 14; 15; 16 mm

‘

96 83 87 51 ‘

No 25

TCS 20/8, 6x7–19x22 mm

sizes 7 x 8; 9 x 10; 10 x 11; 12 x 13; 14 x 15; 16 x 18; 17 x 19 mm

‘

ö x

TCS 29/7, 8x9–20x22 mm

ö x

175 x 350 x 45 mm, 8 pieces ‘

R g

Code ‘

96 83 81 92

1300

€ 108.70

‘

No 20

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 21; 19 x 22 mm

175 x 350 x 40 mm, 7 pieces ‘

R g

Code ‘

96 83 01 95

1520

€ 258.10

‘

No 29 ‘

sizes 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22 mm

TCS 1/4'' + 10760CV

TCS 40/35/9

ö x

ö x 1

175 x 350 x 40 mm, 44 pieces

175 x 350 x 43 mm, 27 pieces

‘

Code

R g

€

‘

987

184.70

‘

96 83 81 76 ‘

a sizes 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm

Code 96 83 06 01

1/4''

No 40 ‘

No 400

1/4''

D 150 mm

No 404

1/4''

D 116 mm

No 405/2

1/4''

D a 54 mm

‘

1045

D a 150 mm

No 407

1/4''

a sizes 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm

No 40L

1/4'' a sizes 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13 mm

No 41K

1/4''

No 44K

1/4''

a, E 3; 4; 5; 6; 8 mm

No 44P

1/4''

a, k sizes 1; 2; 3; 4 mm

No 400

1/4''

D 150 mm

No 404

1/4''

D 116 mm

No 405/2 No 405/4

1/4'' 1/4''

D a 54 mm D a 100 mm

No 405/6

1/4''

D a 150 mm

No 407

1/4''

D a 38 mm

No 412

1/4''

No 415

1/4''

No 409

3/8''

D 1/4'' a

1/4''

‘

a, r 0.6 x 3.5; 1.0 x 5.5; 1.2 x 8 mm

D a 38 mm

No 412

1/4''

No 415

1/4''

No 10760CV

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10; 12 mm

‘

‘ ‘

‘

TCS 40/41/44/8

ö x

‘

175 x 350 x 40 mm, 33 pieces

TCS 456/16/7

‘

Code

R g

€

715

258.00

‘

96 83 02 17

416.85

No 40

‘

1/4''

‘

€

‘

No 405/6 ‘

R g

‘

No 40

a sizes 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm

No 41K

1/4''

No 44K

1/4''

ö x

‘

a, r 0.6 x 3.5; 1.0 x 5.5; 1.2 x 8 mm

175 x 350 x 40 mm, 23 pieces ‘

R g

‘

Code ‘

No 44P

1/4''

No PZ 1221 No PZ 1222

1/4''

‘

No 400

a, k sizes 1; 2; 3; 4

E, l size 1 1/4'' E, l size 2 1/4''

‘

D 150 mm D 116 mm

No 404

1/4''

No 405/2

1/4''

D a 54 mm

No 405/6

1/4''

D a 150 mm

‘

No 407

1/4''

‘

D a 38 mm

No 409

3/8''

D 1/4'' a

No 412

1/4''

No 415

1/4''

‘

a, E 3; 4; 5; 6; 8 mm

96 83 02 18

1400

€ 248.80

‘

No 456

3/8'' a sizes 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22 mm

No 427/3

3/8''

D a 76 mm

No 427/5

3/8''

D a 125 mm

No 427/10

3/8''

D a 240 mm

No 428

3/8''

D a 46 mm

No 431

1/4''

D 3/8'' a

No 432

1/2''

D 3/8'' a

No 435

3/8''

‘

Tool trolleys, Tool boxes, Sets TCS 456/16/4 MF

TCS 1/2''-512/6

ö x

175 x 350 x 45 mm, 20 pieces

175 x 350 x 35 mm, 6 pieces

‘ ‘

R g

Code

€

‘

R g

Code ‘

96 83 03 57

1123

222.15

‘

a sizes 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22 mm

96 83 81 75

No 427/5

3/8''

D a 125 mm

No 427/10

3/8''

D a 240 mm

No 428

3/8''

D a 46 mm

No 435

3/8''

‘

No 506

1/2''

D 300 mm

No 509/2

1/2''

D a 52 mm

No 509/5

1/2''

D a 130 mm

No 509/10

1/2''

D a 255 mm

No 510

1/2''

D a 71 mm

No 512

1/2''

‘

TCS 456/31/8

TCS 1/2''-512/9

ö x

175 x 350 x 40 mm, 9 pieces

350 x 350 x 32 mm, 39 pieces

‘

R g

‘

R g

Code

€

‘

96 83 06 02

2701

658.15

Code ‘

96 83 06 03

a sizes 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22 mm 3/8''

2364

‘

No 456

No 506

1/2''

D 300 mm

No 509QR/2

1/2''

D a 52 mm

No 509/5

1/2''

D a 130 mm

No 509QR/10

1/2''

D a 255 mm (2x)

No 510

1/2''

D a 71 mm

No 512

1/2''

No 513

3/8''

D 1/2'' a

No 514

3/4''

D 1/2'' a

‘

No 46

3/8''

‘

a sizes 10; 11; 12; 13 mm

No 47

a sizes 10; 11; 12; 13; 14; 15; 16 mm

No 1049

3/8''

a size 9 mm

No 49X

3/8''

a sizes M6; M8; M10

No 427/3

3/8''

‘

D a 76 mm ‘

No 427/5

3/8''

D a 125 mm

No 427/10

3/8''

D a 240 mm

No 428

3/8''

D a 46 mm

No 431

1/4''

D 3/8'' a

No 432

1/2''

D 3/8'' a

No 435

3/8''

No 452

3/8''

‘

€ 148.20

‘

3/8''

No 456

1845

€ 187.40

TCS 50/52/30/6 MF

TCS 52/18 MF

ö x

ö x 1

175 x 350 x 55 mm, 18 pieces ‘

350 x 350 x 70 mm, 36 pieces

R g

Code

‘

R g

Code

€

‘

96 83 03 54

4604

96 83 03 59

1850

1/2'' a sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 27; 30; 32; 34 mm

No 52

399.00

1/2'' a sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 30 mm

159.15

‘

No 50

€

‘

No 52

1/2'' a sizes 12; 13; 17; 18; 19; 20; 21; 22; 24; 27; 30; 32; 34 mm

No 54

1/2''

a sizes 5; 6; 7; 8; 10; 12 mm

No 506

1/2''

D 300 mm

No 509/5

1/2''

D a 130 mm

No 509/10

1/2''

D a 255 mm

No 510

1/2''

D a 71 mm

No 512

1/2''

TCS 50a/17

‘

ö x

175 x 350 x 40 mm, 17 pieces ‘

R g

Code

€

‘

3/8''

No 513 ‘

D 1/2'' a

96 83 87 80

1600

161.15

‘

a sizes 3/8; 7/16; 1/2; 9/16; 19/32; 5/8; 11/16; 3/4; 25/32; 13/16; 7/8; 15/16; 1; 1 1/16; 1 1/8; 1 3/16; 1 1/4''

1/2''

No 50a

TCS 50/51/52/32

ö x

‘

TCS 50TX/54TX/17

ö x

175 x 350 x 50 mm, 32 pieces ‘

R g

Code

€

‘

96 83 81 91

2950

265.20

175 x 350 x 40 mm, 17 pieces ‘

‘

a sizes 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 30 mm 1/2''

No 50

R g

Code ‘

€

‘

1/2'' a sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 27; 30; 32 mm

No 52 ‘

96 83 87 63

1382

202.15

‘

No 50TX

1/2'' a sizes E10; E11; E12; E14; E16; E18; E20; E24

No 54TX

1/2'' a sizes T20; T25; T27; T30; T40; T45; T50; T55; T60

‘

1/2''

No 51 ‘

a sizes 22; 27 mm ‘

TCS 52/17

ö x

175 x 350 x 40 mm, 17 pieces ‘

R g

Code ‘

96 83 81 77

1605

€ 140.55

‘

No 52

a sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 27; 30; 32 mm 1/2''

‘

Tool trolleys, Tool boxes, Sets TCS 40/456/52/78/19

TCS 40/45/50/89/19

ö x

530 x 350 x 30 mm, 97 pieces

530 x 350 x 70 mm, 108 pieces

‘

R g

Code

€

‘

96 83 20 95

7000

977.40

‘

R g

Code

€

‘

96 83 01 92

8000

1119.75

‘

No 40

a sizes 4; 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13 mm

No 44K

1/4''

No 456

a sizes 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22 mm

1/4''

‘

a, E 3; 4; 5; 6; 8 mm

a sizes 5; 6; 8 mm

No 52

a sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24; 27; 30; 32; 34 mm

‘

No 44

1/4''

a sizes 3; 4; 5; 6 mm

No 400

1/4''

D 150 mm

No 404

1/4''

D 116 mm

No 405/6

1/4''

D a 150 mm

No 407

1/4''

D a 38 mm

No 409M

3/8''

D 1/4'' a

No 415

1/4''

No 45

a sizes 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19 mm

No 46

3/8''

a sizes 20.8 mm-13/16''

No 49

3/8''

a sizes 4; 5; 6; 7; 8; 10 mm

No 425

3/8''

D 165 mm

No 427/3

3/8''

D a 76 mm

No 427/10

3/8''

D a 240 mm

No 428

3/8''

D a 46 mm

No 432M

1/2''

D 3/8'' a

No 435

3/8''

No 50

a sizes 19; 21; 22; 24; 27; 30; 32 mm

No 52

1/2'' a sizes 16; 17; 18; 19; 22; 24; 27; 30; 32 mm

No 54

1/2''

a sizes 6; 7; 8; 10 mm

No 54X

1/2''

a sizes M6; 8; 12; 14

No 506

1/2''

D 300 mm

No 509/5

1/2''

D a 130 mm

No 509/10

1/2''

D a 255 mm

No 510

1/2''

D a 71 mm

No 512

1/2''

No 514M

3/4''

D 1/2'' a

No 40TX No 45TX

1/4'' 3/8''

a sizes E4; E5; E6; E7; E8 a sizes E10; E12; E14

No 50TX

1/2''

a sizes E11; E16; E18; E20; E24

No 54TX No 1410 No 1411 No 1412 No 1413 No 1440 No 1441 No 1442 No 1443 No 1444 No 1445 No 1446 No 1427

a sizes T45; T50; T55; T60 size T6 size T7 size T8 size T9 size T10 size T15 size T20 size T25 size T27 size T30 size T40 size T25 (65 mm)

No 415SGB

1/4''

‘

3/8''

a sizes 3.5; 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13 mm 1/4''

‘

3/8''

No 49

No 40

‘

1/2''

‘

No 54

1/2''

a sizes 10; 12 mm

‘

1/4''

a sizes E8; E10

‘

No 40TX No 44KTXB

a sizes T8; T10; T15; T20; T25; T27; T30; T40

No 45TX

3/8''

No 49TX No 54TX

3/8''

No 1054TX No 2054TX

1/2''

No 400

1/4''

D 150 mm

No 404

1/4''

D 116 mm

No 405/2 No 405/4

1/4'' 1/4''

D a 54 mm D a 100 mm

No 407

1/4''

D a 38 mm

No 412

1/4''

No 415

1/4''

No 425

3/8''

‘

1/4''

3/8''

‘

‘ ‘

‘

a Gr. E8; E10; E12; E14 ‘

‘

a sizes T25; T45 1/2'' a sizes T40; T50; T55; T60 a sizes T50; T55 1/2'' a size T40; T45

‘

1/2''

‘

No 427/3

3/8''

No 427/10

3/8''

‘

D a 76 mm D a 240 mm

No 428

3/8''

D a 46 mm

No 431

1/4''

D 3/8'' a

No 432

1/2''

D 3/8'' a

No 435

3/8''

‘

No 506

1/2''

D 300 mm

No 509/5

1/2''

D a 130 mm

‘

No 509/10

1/2''

D a 255 mm

‘

No 510

1/2''

D a 71 mm

No 512

1/2''

No 513

3/8''

D 1/2'' a

‘

D 165 mm

‘

1/2''

‘

TCS 54/2309K/12506

TCS TX/57 MF N

ö x

ö x 1

175 x 350 x 40 mm, 13 pieces ‘

R g

Code

€

‘

96 83 01 63

1830

214.10

‘

350 x 350 x 75 mm, 57 pieces ‘

R g

Code

€

‘

a sizes 5; 6; 7; 8; 10; 12; 14; 17; 19 mm 1/2''

No 54

96 83 04 50

a sizes 17; 19 mm

No 2309K

1/2''

No 12506

sizes 6; 7 mm

No 21TX

sizes E6 x E8; E10 x E12; E14 x E18; E20 x E24

No 40TX No 45TX

1/4'' 3/8''

a sizes E4; E5; E6; E7; E8 a sizes E10; E12; E14

No 49TX

3/8''

a sizes T40; T45

No 50TX

1/2''

a sizes E16; E18; E20; E24

No 54TX

1/2''

a sizes T50; T55; T60

No 415SGB

1/4''

No 412

1/4''

No 442

1/4''

b 3/8'' a

No 1410 No 1411 No 1412 No 1413 No 1440 No 1441 No 1442 No 1443 No 1444 No 1445 No 1446 No 1427

size T6 size T7 size T8 size T9 size T10 size T15 size T20 size T25 size T27 size T30 size T40 size T25 (65 mm)

No 4650

sizes T6; T7; T8; T9; T10; T15; T20; T25; T27; T30

No 10766

sizes T6; T7

No 10766/9

sizes T8; T9; T10; T15; T20; T25; T27; T30; T40

‘

‘ ‘

TCS 54/54X/16

‘

ö x

‘

175 x 350 x 35 mm, 16 pieces

‘

R g

Code

€

‘

96 83 87 62

1665

490.95

‘

2060

191.80

‘

No 54

a sizes 4; 5; 6; 7; 8; 10; 12; 14; 17 mm

No 54X

1/2'' a sizes M5; M6; M8; M10; M12; M14; M16

1/2''

‘

Tool Control System

TCS 55/11/6

The safety inlay system Designed to fit our Tool Trolleys and Tool Boxes

ö x

With yellow signal cut-outs to show whether all tools are in their places 530 x 350 x 90 mm, 17 pieces ‘

R g

Code ‘

96 83 02 21

10100

€ 556.00

‘

No 55

3/4'' a sizes 22; 24; 27; 30; 32; 34; 36; 38; 41; 46; 50 mm

No 552

3/4''

No 556

3/4''

No 558

510 mm

No 559/8 No 559/16

3/4'' 3/4''

D a 200 mm D a 400 mm

No 568

1/2''

D 3/4'' a

‘

Tool trolleys, Tool boxes, Sets TCS 4620/4630

TCS 4620/4660VDE

ö x

175 x 350 x 35 mm, 7 pieces ‘

Code

R g

€

490

65.65

‘

96 83 82 78

530 x 350 x 40 mm, 18 pieces

‘

R g

Code ‘

No 4620

size 1 (0.6 x 3.5 x 75 mm); size 2 (0.8 x 4.0 x 100 mm); size 3 (1.0 x 5.5 x 125 mm); size 4 (1.2 x 6.5 x 150 mm)

96 83 11 79

1689

‘

No 4620

size 1 (0.6 x 3.5 x 75 mm); size 2 (0.8 x 4.0 x 100 mm); size 4 (1.2 x 6.5 x 150 mm); size 5 (1.6 x 8.0 x 175 mm); size 6 (1.6 x 10.0 x 200 mm); size 7 (2.0 x 12.0 x 200 mm)

No 4628

size 1 (0.4 x 2.5 x 60 mm)

No 4630

sizes 1; 2; 3

No 4632

size 4

No 4640

sizes 0; 1; 2

No 4660 VDE

size 1 (0.4 x 2.5 x 75 mm)

No 4724

size 2 (1.0 x 5.5 x 25 mm)

No 4734 No 4744

size 2 size 1

‘

No 4630

€ 180.55

sizes 1; 2; 3

‘

TCS 4620/4660VDE+10767

‘

ö x

‘

530 x 350 x 35 mm, 27 pieces

‘

R g

Code ‘

96 83 11 68

2080

€

‘

206.35

TCS 4621/4734/16

‘

No 4620

size 1 (0.6 x 3.5 x 75 mm); size 2 (0.8 x 4.0 x 100 mm); size 4 (1.2 x 6.5 x 150 mm); size 5 (1.6 x 8.0 x 175 mm); size 6 (1.6 x 10.0 x 200 mm); size 7 (2.0 x 12.0 x 200 mm)

No 4628

size 1 (0.4 x 2.5 x 60 mm)

No 4630

sizes 1; 2; 3

No 4632

size 4

No 4640

sizes 0; 1; 2

‘

ö x

530 x 350 x 30 mm, 16 pieces ‘

R g

‘

Code ‘

€

‘

No 4660 VDE

size 1 (0.4 x 2.5 x 75 mm)

No 4724

size 2 (1.0 x 5.5 x 25 mm)

No 4734 No 4744

size 2 size 1

No 10767/9

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

96 83 20 98

1490

‘

No 4621

size 0 (0.4 x 2.5 x 80 mm); size 1 (0.5 x 3.5 x 90 mm); size 2 (0.6 x 4.0 x 100 mm); size 4 (1.0 x 6.5 x 140 mm); size 5 (1.2 x 8.0 x 160 mm)

No 4631

size 1; 2

No 4632

size 1; 2; 3

No 4724

size 2 (1.0 x 5.5 x 25 mm)

No 4734

size 2

No 10506

0.8 x 4.0 x 300 mm

No 10518

1.0 x 5.5 x 410 mm

No 12600

500 g

No 12922E

O 6 mm

‘

‘ ‘

‘

218.45

TCS 4622/4650+10760+10766

TCS 4820/4830

ö x

ö x 1

175 x 350 x 35 mm, 7 pieces 530 x 350 x 40 mm, 36 pieces

‘

R g

Code

Code €

‘

R g

€

555

75.40

‘

96 83 81 84 ‘

96 83 11 96

1895

238.00

‘

No 4622

‘

size 1 (1.0 x 5.5 x 100 mm); size 2 (1.2 x 6.5 x 125 mm); size 4 (1.6 x 10.0 x 175 mm); size 5 (2.0 x 12.0 x 200 mm)

No 4820

0.6 x 3.5 x 75 mm; 0.8 x 4.0 x 100 mm; 1.0 x 5.5 x 125 mm; 1.2 x 6.5 x 150 mm

No 4830

sizes 1; 2; 3

‘

No 4630

size 1

No 4632

size 3

No 4650

sizes T6; T7; T8; T9; T10; T15; T20; T25; T27; T30

No 4724

size 2 (1.0 x 5.5 x 25 mm)

No 4734

size 2

No 10760CV/9

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

No 10766/9

sizes T8; T9; T10; T15; T20; T25; T27; T30; T40

‘

TCS 4856

‘

ö x

‘

175 x 350 x 40 mm, 7 pieces ‘

‘

Code 96 83 87 55

‘

R g

€

447

88.45

‘

TCS 4650

No 4856

sizes T8; T9; T10; T15; T20; T25; T30

‘

ö x

TCS 4724/4840+10767

ö x

175 x 350 x 35 mm. 8 pieces ‘

Code

R g

€

350

83.75

‘

96 83 87 67

530 x 350 x 45 mm, 24 pieces ‘

R g

‘

No 4650

sizes T8; T9; T10; T15; T20; T25; T27; T30

‘

Code ‘

96 83 07 06

1755

€ 255.30

‘

TCS 4660/4665

No 4628

size 1 (0.4 x 2.5 x 60 mm)

No 4724

size 2 (1.0 x 5.5 x 25 mm)

No 4734 No 4744

size 2 size 1

No 4820

0.6 x 3.5 x 75 mm; 0.8 x 4.0 x 100 mm; 1.2 x 6.5 x 150 mm; 1.6 x 10.0 x 200 mm; 2.0 x 12.0 x 250 mm

No 4830 No 4840

sizes 1; 2; 3 size 1

No 10767/9

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

‘

ö x

‘

175 x 350 x 40 mm, 6 pieces ‘

Code

R g

€

400

65.85

‘

96 83 87 66

‘

No 4660 VDE

size 1 (0.4 x 2.5 x 75 mm); size 3 (0.6 x 3.5 x 100 mm); size 5 (1.0 x 5.5 x 125 mm); size 6 (1.2 x 6.5 x 150 mm)

‘

No 7756 ‘

‘

No 4665 VDE

size 1; 2

No 12922E ‘

O 6 mm

‘

Tool trolleys, Tool boxes, Sets TCS 10765/10768/12507/19

TCS 6501–6602/4N

ö x

175 x 350 x 35 mm, 4 pieces ‘

530 x 350 x 30 mm, 19 pieces

R g

‘

Code

R g

Code

€

‘

96 83 06 22

1080

€ 128.30

‘

96 83 06 21

1640

150.30

‘

No 65 01 5 180 ‘

No 10765/9

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

No 65 29 5 200

‘ ‘

No 10768

sizes 2.5; 3; 4; 5; 6; 8; 10 mm

No 12507-2K

sizes 8; 10; 13 mm

No 65 72 6 240 ‘

‘

No 66 02 5 160 ‘

‘

TCS 6543–6564/3

TCS 10769+10771/17

ö x

175 x 350 x 30 mm, 3 pieces ‘

350 x 350 x 30 mm, 17 pieces Code

‘

Code

R g

€

940

138.70

‘

96 83 20 99

R g

€

815

73.00

R g

€

626

88.00

‘

96 83 81 80 ‘

No 65 43 4 002 ‘

No 10769

sizes T9; T10; T15; T20; T25; T30; T40; T45; T50

No 65 45 4 002 ‘

‘

No 10771/8

sizes T9; T10; T15; T20; T25; T27; T30; T40

No 65 64 2 250 ‘

‘

TCS 6543–6546/4

TCS 6501–6602/4

ö x

175 x 350 x 30 mm, 4 pieces 175 x 350 x 35 mm, 4 pieces

‘

R g

Code ‘

96 83 81 79

1010

€ 114.40

Code ‘

96 83 06 08 ‘

‘

No 65 43 4 002 No 65 01 5 180

‘

No 65 29 5 200

No 65 44 4 021 ‘

‘

No 65 51 6 240 ‘

No 65 45 4 002 ‘

No 66 02 5 160 ‘

No 65 46 4 021 ‘

TCS 6534–6545/6

TCS 102-108/11

ö x

175 x 350 x 33 mm, 11 pieces ‘

350 x 350 x 30 mm, 6 pieces

R g

‘

Code

R g

Code

€

‘

€

‘

96 83 87 54

1665

108.05

‘

96 83 21 00

1070

147.80

‘

No 102

150; 200; 250 mm

No 105

120 x 10; 120 x 12 mm

No 108

150 x 2.5; 150 x 3; 150 x 4; 150 x 5; 150 x 6; 150 x 8 mm

‘

No 65 34 5 280

‘

No 65 35 5 200 ‘ ‘

No 65 43 4 001 No 65 43 4 002

TCS 102–108/10957/12718/13

‘

No 65 45 4 001 No 65 45 4 002

ö x

‘

TCS 102–109/10956/10960/6

ö x

530 x 350 x 40 mm, 13 pieces ‘

R g

Code

175 x 350 x 40 mm, 6 pieces

‘

96 83 02 26

R g

Code

1500

€ 222.60

‘

€

‘

96 83 81 81

3730

94.60

No 102

200 mm

No 103

150 mm

No 105

120 x 10 mm

No 108

150 x 3; 150 x 4; 150 x 5; 150 x 6; 150 x 8; 200 x 8 mm

No 10957

O 40 mm

No 10960

500; 800 g

‘

O 35 mm

‘

No 10956 No 10960

500 g

‘

No 102

175 mm

No 108

150 x 6; 175 x 6 mm

No 109

size 6; 100 x 3.4 mm

‘

‘ ‘

No 12718

‘ ‘

TCS 102–108/10960/10

TCS 102–108/10957/10960 MF

ö x

175 x 350 x 40 mm, 10 pieces ‘

R g

Code

€

‘

96 83 03 61

1569

102.25

‘

No 102

200 mm

No 105

120 x 12 mm

No 108

115 x 2; 150 x 3; 150 x 4; 150 x 5; 150 x 6; 175 x 4; 200 x 8 mm

‘

530 x 350 x 40 mm, 12 pieces ‘

R g

Code

€

‘

96 83 03 55

3343

216.60

‘

No 102

200 mm

No 103

150 mm

No 105

120 x 10 mm

No 108

150 x 3; 150 x 4; 150 x 5; 150 x 6; 150 x 8 mm

No 10957

O 40 mm

No 10960

500; 800 g

‘

No 10960

500 g

‘

No 12718 ‘

Tool trolleys, Tool boxes, Sets TCS 102–108/10957/10960/13

TCS 102–108/10956/10960/18

ö x

530 x 350 x 55 mm, 18 pieces

530 x 350 x 60 mm, 13 pieces

‘

R g

‘

R g

Code

€ 249.75

‘

96 83 01 77

5540

Code ‘

96 83 06 20

3653

€ 249.15

‘

No 102

200; 300 mm

‘

No 103

175 mm

‘

No 105

120 x 12 mm

No 108

150 x 3; 150 x 4; 150 x 5; 150 x 6; 150 x 8 mm

No 102

150 mm

No 103

150 mm

No 105

120 x 10 mm

No 108

150 x 2.5; 150 x 3; 150 x 4; 150 x 5; 150 x 6; 150 x 8 mm

No 10956

O 50 mm

No 10960

300; 500 g

‘

No 10957

O 50 mm

No 10960

500; 800; 1000 g

‘

No 10356

TCS 102–108/10957/10960/16

‘

ö x

No 10670

285 mm

No 10672

20 x 315 mm

‘

No 12374 ‘

No 12900N ‘

No 12965 ‘

530 x 350 x 45 mm, 16 pieces

TCS 12025–13110/11

‘

R g

Code 96 83 06 09

3715

ö x

€

‘

265.85

‘

No 102

200 mm

No 103

150 mm

No 105

120 x 10 mm

No 108

150 x 3; 150 x 4; 150 x 5; 150 x 6; 150 x 8 mm

‘

530 x 350 x 35 mm, 11 pieces ‘

R g

‘

No 10957 ‘

O 40 mm

Code ‘

96 83 87 59 No 10960

500 g

No 12025

210 mm

No 12030

260 mm

No 12035

210 mm

No 12036

260 mm

No 12050

300 mm

‘

No 12373 ‘

No 12600

2070

‘

500 g

‘

‘ ‘

No 12718 ‘

‘

No 12931

‘

No 12320

No 65 64 2 250

‘

No 39 cars

400 mm

No 12321 ‘

‘

No 12718 ‘

No 12931

‘

No 12965 ‘

No 13110 ‘

300 mm

€ 185.25

TCS 13126/13127/2

Accessories for display units

ö x

8043

175 x 350 x 60 mm, 2 pieces ‘

Code

R g

€

475

188.30

‘

96 83 00 14 ‘

No 13126 ‘

No 13127 ‘

TCS 1/3 MF

Steel display tray for small components

Consisting of: 1 base 100 x 47 cm, RAL 7035, made in one piece with grooves front and back 1 pair hook-on supports for fixing tray to perforated panel, depth 47 cm, RAL 7035 2 dividers, clear plastic, for compartmented tray grooves, 100 x 7.5 cm 8 toothed dividers clear plastic, 47 x 7.5 cm 5 cross dividers, clear plastic, 8.4 x 7.5 cm 25 cross dividers, clear plastic, 16.8 x 7.5 cm 1 price rail, plastic, 100 cm 1 protective film for price rail

‘

ö x

W mm

H mm

D mm

R kg

€

1000

470

11.6

Price on request

Code ‘

88 10 01 11 ‘

W = Width, H = Height, D = Depth ‘

8043/1

175 x 350 x 30 mm, empty inlay ‘

Code

R g

€

23.20

‘

83 82 03 60

Cover for steel display tray

protects against dust and pilfering, for steel display tray No 8043

‘

Code

W mm

H mm

D mm

R kg

€

1005

450

4.6

Price on request

‘

88 10 01 10 ‘

W = Width, H = Height, D = Depth ‘

8023L

Light unit

with connecting cable

8003S

Display unit

220 cm high, 100 cm wide, black, RAL 9005, on request available in green RAL 6024 and light grey RAL 7035.

‘

Code

R kg

€

8.5

Price on request

‘

80 23 01 10

Consists of: 5 steel pegboards 100 x 40 cm, 1 base plate light grey, 2 base supports with adjusting screws, 100 hooks 170 x 9 mm, plastic coated, 25 hooks 170 x 6 mm, plastic coated Without columns and light unit (please order separately: column No 8024, single, or No 8029, 2 columns, and light unit No 8023L)

‘

Light unit available on request with slogan in other languages ‘

8023-2

Angle bracket with cover

1 pair, for Light unit 8023L

‘

Code

R kg

€

1.1

Price on request

‘

80 23 00 12 ‘

8023-3

Angle holder

Holder for two Light units 8023L mounted side-by-side ‘

Code

R kg

8003S 8024 8029 8023L

38.5 6 12 8.5

‘

80 03 00 10 80 24 00 00 80 29 00 00 80 23 01 10

€ ‘

(1 column) (2 columns) (light unit)

Price on request Price on request Price on request Price on request

Code

R kg

€

0.75

Price on request

‘

80 23 00 13 ‘

‘

Tool trolleys, Tool boxes, Sets 8024

Column

8026S

without base support, black RAL 9005

Steel pegboard

100 x 40 cm, black RAL 9005, on request available in green RAL 6024 and light grey RAL 7035

‘

Code

R kg

€

3.5

Price on request

‘

80 26 00 03 ‘

8027

Base plate

metal, light grey RAL 7035 ‘

Code

L cm

R kg

220

‘

80 24 00 00

€ Price on request

‘

8029

2 Columns

Code

R kg

€

5.6

Price on request

‘

without base supports, black RAL 9005

80 27 00 00 ‘

8042

Drawer

for storing larger parts under the base plate. Steel sheet, light grey, W 100 x H 18 x D 47 cm ‘

Code

R kg

‘

80 42 00 00

€ Price on request

‘

8015

Plastic coated hook

‘

Code

L cm

R kg

€

220

Price on request

‘

80 29 00 00

25 pieces, 55 x 6 mm

‘

8024-1

Column extension

for extending the Column from 220 to 260 cm ‘

Code

R g

€

600

Price on request

‘

88 10 01 03

‘

Code

L cm

R kg

€

1.6

Price on request

‘

80 24 00 01

‘

8016

Plastic coated hook

‘

8025

50 pieces, 170 x 9 mm

Base support

for column

‘

Code

R g

‘

88 10 01 04 ‘

‘

Code

R kg

‘

80 25 00 00 ‘

€ Price on request

3850

€ Price on request

8017

Plastic coated hook

8004S

25 pieces, 170 x 6 mm

‘

R g

Code ‘

88 10 01 05

1040

€ Price on request

‘

8022N

Pliers/wrench hook

Corner display unit, 90°

Consists of: 5 steel pegboards, left, 40 cm high, black RAL 9005, 5 steel pegboards, right, 40 cm high, black RAL 9005. On request available in green RAL 6024 and light grey RAL 7035, 1 base plate, metal, light grey RAL 7035. 1 base support with adjusting screws. Without columns and corner cover (please order separately column No 8024, single, or No 8029, 2 columns, and cover No 8023-4)

‘

Code

R g

€

108

Price on request

‘

88 10 01 26 ‘

8044

Toothed divider

‘

Code

47 x 7.5 cm, for flexible arrangement of compartments in the display tray

D mm

W mm

H mm

D mm

R kg

€

950

660

2200

850

33.5

Price on request

‘

80 04 00 10 ‘

D = Diagonal, W = Width of pegboard, H = Height, D = Depth ‘

‘

R g

Code ‘

88 10 01 12

201

Price on request

‘

8045

8023-4

€

Cover

for use with Corner display unit No 8004S.

Cross divider

16.8 x 7.5 cm, for flexible arrangement of compartments in the display tray

‘

R kg

Code

€

‘

80 23 00 14

Price on request

‘

Cover available on request with slogan in other languages ‘ ‘

Code

R g

€

Price on request

‘

88 10 01 18 ‘

8046

Display stands ST 11

Cross divider

Display stand for pliers

for 72 pairs of pliers, matt black lacquered, three-tier design. Counter or wall display. Supplied without pliers.

8.4 x 7.5 cm, for flexible arrangement of compartments in the display tray

‘

Code

R g

€

Price on request

‘

88 10 01 14 ‘

‘

Code

W mm

H mm

D mm

R kg

€

500

200

380

4.5

Price on request

‘

82 08 00 01 ‘

W = Width, H = Height, D = Depth ‘

Tool trolleys, Tool boxes, Sets ST 97

SERVOMAT display stand for sockets

ST 97 R/1202

free standing or for hanging on pegboards, variable configuration possible for sockets with 1/4, 3/8 and 1/2'' u square drive. Display Stand is delivered with 17 dividing elements. Further dividing elements can be ordered for an individual arrangement. Details: sheet metal, green painted, with acryl-glass cover, 660 x 250 x 200 mm. Supplied without sockets.

Standard partitions

for SERVOMAT ST 97 ‘

Code

partition height

R g

€

12 mm, bent

Price on request

‘

88 13 00 02 ‘

ST 97 R/2201

Standard partitions

for SERVOMAT ST 97

‘

Code

R g

6380

‘

82 13 00 01

‘

€ Price on request

‘

Code

partition height

R g

€

22 mm, straight

Price on request

‘

88 13 00 03 ‘

ST 97 R/1201

Standard partitions

ST 97 R/2202

for SERVOMAT ST 97

Standard partitions

for SERVOMAT ST 97

‘

Code

partition height

R g

€

12 mm, straight

Price on request

‘

88 13 00 01 ‘

‘

Code

R g

€

22 mm, bent

Price on request

‘

88 13 00 04 ‘

partition height

STAHLWILLE spanners Conventional spanners When force is applied to a spanner, the greatest force acts on the joint between the jaw and the shaft. Standard-quality open-jaw spanners do not take this fact into consideration. In the context of normal hard work, this can lead to the tool breaking, causing considerable personal injury. STAHLWILLE spanners To reduce the danger of breakage, we add more material where the greatest loads are to be found and take it away from the places that are not under such stress. In this way, we are able to manufacture extremely sturdy, slim and light tools which also facilitate working in confined spaces due to their compact designs.

Load zones in standard-quality spanners

Load zones in spanners by STAHLWILLE

Extremely resilient, remarkably durable

Concentrated force

Drop-forged from high-grade special steels

More resilient than any screw

Optimum hardening in continuous furnaces with no scale build-up or skin decarburisation

Rings are thinner than conventional rings, facilitating work in confined spaces

Gentle quenching in oil

Light and easy to handle High resistance to bending and low weight thanks to STAHLWILLE's typical double-T profile Snug-fitting, skin-friendly surfaces thanks to STAHLWILLE's rounded finish

Open-jaw spanners in oil

Absolutely resistant to bending thanks to the double-T profile

Strong, extremely tough and durable Quality assured STAHLWILLE's Quality Assurance System was awarded an internationally recognised certificate in accordance with DIN ISO 9001 by the DQS (German Association for the Certification of Quality Assurance Systems).

This one – and the next one: tailored to fit

This one – and the next one: perfect chrome plating

Guaranteed test results STAHLWILLE combination spanners No 13 (ring)

Guaranteed test results STAHLWILLE combination spanners No 13 (open-jaw) Nm

2000

1900

1800

1700

1600

1500

1400

1300

1200

1100

1000

900

800

700

600

500

400

300

200

100

0 6 8 3,5 5

10 13 16 17 18 19 21 22 24 27 30 32 34 36 41 6 8 10 *10 12 *12 14 *14 16 18 20 *22 22 24 27

6 8 3,5 5

Size/thread (M) * Reference to older screw thread standards Test results for STAHLWILLE Test results to DIN 899 or ISO 1711 Clamping torque for 8.8 screws at 100 % tensile yield strength (μ = 0,14)

STAHLWILLE No 8 striking face double hex box-spanners are tougher, thinner and higher.

10 13 16 17 18 19 21 22 24 27 30 32 34 36 41 6 8 10 *10 12 *12 14 *14 16 18 20 *22 22 24 27

Test results for STAHLWILLE Test results to DIN 899 or ISO 1711 Clamping torque for 12.9 screws at 100 % tensile yield strength (μ = 0,14)

Key benefits when tightening and loosening screws Tougher than any screw thanks to the forged double hex. Thinner than conventional rings – facilitating work in confined spaces. Higher than standard nuts – prevents the spanner jamming on the nut. 65

Spanners 10

Double open ended spanners

10a

Double open ended spanners

‘

DIN 3110, ISO 10102 (metric sizes), Chrome Alloy Steel, chrome plated.

A „

L mm

b1 mm

b2 a mm mm

R g

1/4 x 5/16 5/16 x 3/8 3/8 x 7/16 7/16 x 1/2

140 140 155 170 190 205 205 205 220 220 235 235 235 250 270 300

16 18 23 26 30 32 35 36 36 40 40 42 45 49 53 64

18 23 26 30 32 36 40 40 42 42 47 49 47 53 55 75

21 34 48 58 73 96 105 101 135 135 167 177 190 235 303 502

10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5

Code ‘

40 43 16 20 40 43 20 24 40 43 24 28 40 43 28 32 40 43 32 34 40 43 34 36 40 43 35 38 40 43 36 38 40 43 36 40 40 43 38 40 40 43 38 42 40 43 40 44 40 43 41 42 40 43 44 46 40 43 46 48 40 43 52 58 1

‘

Code

A mm

R g

L mm

b1 mm

b2 mm

a mm

100 120 120 140 140 140 155 170 170 170 170 170 190 190 205 190 205 205 220 220 220 235 235 235 250 250 250 270 280 285 300 300 300 300 325 325 375 425

12.5 14.8 15.5 17 18 18 23 23 23 26 28 28 30 30 30 32 32 36 36 38 40 40 42 45 47 47 49 53 53 55 60 60 66 66 70 75 80 88

14 17 17 18 21 23 26 28 30 30 30 32 32 35 38 35 38 38 40 42 42.5 47 49 49 51 53 53 57.5 60 62 66 70 70 75 80 80 88 94.5

3.4 11 3.7 19 3.7 17 4.0 25 4.0 21 4.5 33 4.8 40 5.3 51 5.3 57 5.3 55 5.3 64 5.3 63 5.3 70 5.3 73 5.8 92 5.3 81 5.8 99 5.8 100 6.7 125 6.7 131 6.7 147 7.3 170 7.3 179 7.3 185 7.8 225 7.8 215 7.8 232 8.3 293 8.3 299 8.3 309 9.4 412 9.4 418 9.4 451 9.4 480 10 546 10 619 11 800 12 1030

‘

40 03 04 05 4x5 40 03 55 07 5.5 x 7 40 03 06 07 6x7 40 03 07 08 7x8 40 03 08 09 8x9 40 03 08 10 8 x 10 40 03 10 11 10 x 11 40 03 10 12 10 x 12 40 03 10 13 10 x 13 40 03 11 13 11 x 13 40 03 12 13 12 x 13 40 03 12 14 12 x 14 40 03 13 14 13 x 14 40 03 13 15 13 x 15 40 03 13 17 13 x 17 40 03 14 15 14 x 15 40 03 14 17 14 x 17 40 03 16 17 16 x 17 40 03 16 18 16 x 18 40 03 17 19 17 x 19 40 03 18 19 18 x 19 40 03 18 21 18 x 21 40 03 19 22 19 x 22 40 03 20 22 20 x 22 40 03 21 23 21 x 23 40 03 21 24 21 x 24 40 03 22 24 22 x 24 40 03 24 26 24 x 26 40 03 24 27 24 x 27 40 03 25 28 25 x 28 40 03 27 30 27 x 30 40 03 27 32 27 x 32 40 03 30 32 30 x 32 40 03 30 34 30 x 34 40 03 32 36 32 x 36 40 03 34 36 34 x 36 40 03 36 41 36 x 41 40 03 41 46 41 x 46 1

S 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 1 1 1

€ 4.70 4.70 4.15 5.00 4.50 5.00 4.40 6.05 5.60 6.35 5.35 6.20 6.35 6.15 6.65 5.55 6.80 6.25 7.50 7.05 7.05 9.30 8.75 7.95 8.85 10.40 9.95 11.50 10.70 13.60 15.50 16.00 14.30 17.30 26.30 27.30 34.30 49.70

1/2 x 9/16 9/16 x 5/8 19/32 x 11/16 5/8 x 11/16 5/8 x 3/4 11/16 x 3/4 11/16 x 13/16 3/4 x 7/8 25/32 x 13/16 7/8 x 15/16 15/16 x 1 1 1/8 x 1 5/16

€ 4.75 5.90 5.65 8.00 6.95 7.75 8.30 8.30 8.60 10.10 9.80 10.30 10.30 11.90 13.70 18.50

‘

Sets: Double open ended spanners ‘

Code

Content mm/“

R g

€

745

45.20

945

55.60

1540

70.20

2125

92.65

1242

66.15

‘

96 40 03 05

10/8

96 40 03 14

10/9

96 40 03 07

10/10

96 40 03 06

10/12

96 40 43 06

10a/7

96 40 43 07

10a/11

‘

6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 21 x 24 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 24 x 27; 30 x 32 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 21 x 23; 24 x 27; 25 x 28; 30 x 32 1/4 x 5/16; 3/8 x 7/16; 1/2 x 9/16; 5/8 x 3/4; 11/16 x 13/16; 7/8 x 15/16; 1 1/8 x 1 5/16 1/4 x 5/16; 3/8 x 7/16; 1/2 x 9/16; 9/16 x 5/8; 19/32 x 11/16; 5/8 x 3/4; 11/16 x 13/16; 3/4 x 7/8; 25/32 x 13/16; 7/8 x 15/16; 1 1/8 x 1 5/16

‘

Standard packing: clear view wallet. ‘

4 4.5 4.8 5.3 5.3 5.8 5.8 5.8 6.7 6.7 7.3 7.3 7.3 7.8 8.3 9.4

1870 102.80

ES 10/10, 5.5x7–22x24 mm

TCS 10/10, 6x7–30x32 mm MF

x ö 175 x 350 x 75 mm, 10 pieces

175 x 350 x 60 mm, 10 pieces

‘ ‘

R g

Code

€

‘

96 83 81 30

1100

78.25

R g

Code

€

‘

96 83 03 53

1437

96.45

‘

No 10

sizes 5.5 x 7; 8 x 10; 10 x 12; 11 x 13; 12 x 14; 14 x 17; 17 x 19; 18 x 21; 19 x 22; 22 x 24 mm

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 21; 19 x 22; 24 x 27; 30 x 32 mm

‘

83 81 20 33

Empty tray

106

8.10

‘

TCS 10/10, 6x7–24x27 mm

x ö

ES 10/10, 6x7–30x32 mm

175 x 350 x 66 mm, 10 pieces ‘

R g

175 x 350 x 70 mm, 10 pieces Code

‘

R g

Code

€

‘

96 83 81 26

1515

96 83 81 87

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 24 x 27; 30 x 32 mm

1287

84.90

‘

78.35

No 10

‘

No 10

€

‘

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 21 x 24; 24 x 27 mm

‘

83 81 20 22

Empty tray

112

TCS 10/10, 6x7–24x27 mm MF

8.15

‘

x ö

TCS 10/10, 6x7–30x32 mm

x ö

175 x 350 x 66 mm, 10 pieces ‘

R g

Code

€

‘

96 83 03 58

1320

89.50

‘

No 10

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 21 x 24; 24 x 27 mm

‘

350 x 350 x 30 mm, 10 pieces

TCS 10+13+24/30

‘

R g

Code

€

‘

96 83 81 82

1414

x ö

96.80

‘

No 10

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 24 x 27; 30 x 32 mm

‘

530 x 350 x 75 mm, 30 pieces ‘

R g

Code

€

‘

96 83 06 05

3724

351.45

‘

No 10

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 21 x 24 mm

No 13

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24; 27; 30; 32 mm

No 24

size 10 x 11 mm

‘

Spanners TCS 10a/9

x ö

Combination spanners OPEN-BOX

DIN 3113 form A/ISO 7738 form A (metric sizes), Chrome Alloy Steel, chrome plated.

175 x 350 x 70 mm, 9 pieces ‘

R g

Code

€

‘

96 83 87 79

1555

108.05

‘

sizes 1/4 x 5/16; 3/8 x 7/16; 1/2 x 9/16; 19/32 x 11/16; 5/8 x 3/4; 3/4 x 7/8; 25/32 x 13/16; 15/16 x 1; 1 1/8 x 1 5/16“

No 10a

‘

Code

A mm

L mm

b mm

d mm

a1 mm

a2 mm

R g

5.5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 34 36 38 41 46 50 55 60

100 14.8 105 15.5 110 17 115 18 120 21 125 23 135 26 140 28 160 30 165 32 170 35 180 36 190 38 200 40 230 42 230 45 260 47 260 49 280 53 280 53 300 55 300 57.5 300 60 320 62 330 64 330 66 360 70 450 80 460 88 480 87 480 88 500 94.5 530 103 560 114 590 125

9.2 9.9 11.3 12.4 13.4 14.8 16.4 17.8 19.1 20.6 21.9 23.2 24.6 26 27.5 29 30.3 31.8 33.5 34.9 36.3 37.8 39.2 40.6 41.9 43.2 45.8 48 50.8 53.6 57.8 65.2 73 81 89.8

3.5 3.6 3.9 4.2 4.5 4.8 4.8 5.3 5.3 5.3 5.3 5.8 5.8 6.7 6.7 7 7.3 7.3 7.8 7.8 8.4 8.4 8.4 8.4 8.9 8.9 9.4 9.4 10 11 11 13 14 15 16

5.8 6 6 7 7 7 8 8.5 8.5 8.5 8.5 10 10 11.5 11.5 13 13 13 14 14 14.5 14.5 14.5 14.5 16 16 16.5 17 18 19 19 20 21 22 24

13 15 20 21 27 35 43 46 57 68 73 89 99 126 142 176 216 220 251 254 281 315 345 368 420 404 484 683 787 915 1055 1352 1700 2193 2825

‘

Plastic-wallets for sets of spanners ‘

Code

wallet No

for set No

R g

€

010/12 012/10 012/15 023/8

10/12*, 10a/11* 12/10 Pc 12/15 Pc, 12a/13 Pc 23/8*

276 41 68 123

18.20 6.50 9.60 14.40

‘

83 40 03 06 83 40 46 01 83 40 06 01 83 41 07 04 ‘

* Plastic-wallets must be ordered separately! ‘

013/6KH*

Clip holder for sets of spanners

40 08 55 00 40 08 06 06 40 08 07 07 40 08 08 08 40 08 09 09 40 08 10 10 40 08 11 11 40 08 12 12 40 08 13 13 40 08 14 14 40 08 15 15 40 08 16 16 40 08 17 17 40 08 18 18 40 08 19 19 40 08 20 20 40 08 21 21 40 08 22 22 40 08 23 23 40 08 24 24 40 08 25 25 40 08 26 26 40 08 27 27 40 08 28 28 40 08 29 29 40 08 30 30 40 08 32 32 40 08 34 34 40 08 36 36 40 08 38 38 40 08 41 41 40 08 46 46 40 08 50 50 40 08 55 55 40 08 60 60 1

‘

Code

for set No

‘

83 40 08 06 ‘

* to be discontinued ‘

13/6

R g S 40

€ 6.45

‘

€

10 6.25 10 6.05 10 6.05 10 6.10 10 6.80 10 6.90 10 7.25 10 7.75 10 8.60 10 8.65 10 10.10 10 10.80 10 11.30 10 12.60 10 13.20 10 14.30 10 14.80 10 16.10 5 20.50 5 18.70 5 22.30 5 22.90 5 21.20 5 27.00 5 27.50 5 25.30 5 27.80 1 41.70 1 46.40 1 60.00 1 59.00 1 83.50 1 116.00 1 143.00 1 184.00

13a

Combination spanners OPEN-BOX

‘

Code

A „

L mm

b mm

d mm

a1 mm

a2 R mm g

3/16 13/64 7/32 15/64

95 14 95 14 95 14 95 14 105 15.5 110 17 115 18 120 21 125 23 135 26 160 30 165 32 170 35 180 37 200 40 230 42 235 45 260 47 260 49 280 53 300 55 300 60 330 64 335 66 360 70 450 74 460 80 460 80 480 87 480 88 500 94.5 530 103 530 103

9.8 9.8 9.8 9.8 10.2 11.3 12.4 13.4 14.3 16.4 18.8 20.6 21.9 23.2 25.3 27.5 29 30 31.8 34.9 37.2 39.2 41.4 43.2 45.8 47 49.3 51.4 53.6 58 65.3 68.4 74

3 3 3 3 3.6 3.9 4.2 4.5 4.8 4.8 5.3 5.3 5.3 5.8 6.7 6.7 7 7.3 7.3 7.8 8.4 8.4 8.9 8.9 9.4 9.6 10 10 11 11 13 14 14

3.2 3.2 3.2 3.2 6 6 7 7 7 8 8.5 8.5 8.5 10 11.5 11.5 13 13 13 14 14.5 14.5 16 16.5 16.5 17 18 18 19 19 20 21 21

5 8.15 5 8.15 5 7.95 5 8.30 10 6.85 10 7.55 10 7.00 10 7.80 10 7.85 10 8.20 10 9.05 10 9.80 10 11.70 10 11.80 10 13.20 10 14.40 5 15.80 5 16.20 5 18.30 5 20.40 5 21.50 5 22.90 5 26.80 1 32.20 5 31.10 1 43.40 1 51.50 1 51.50 1 62.50 1 68.00 1 94.50 1 111.00 1 125.00

‘

40 48 12 12 40 48 13 13 40 48 14 14 40 48 15 15 40 48 16 16 40 48 18 18 40 48 20 20 40 48 22 22 40 48 24 24 40 48 28 28 40 48 32 32 40 48 34 34 40 48 35 35 40 48 36 36 40 48 38 38 40 48 40 40 40 48 41 41 40 48 42 42 40 48 44 44 40 48 46 46 40 48 48 48 40 48 50 50 40 48 52 52 40 48 54 54 40 48 56 56 40 48 58 58 40 48 60 60 40 48 62 62 40 48 64 64 40 48 66 66 40 48 69 69 40 48 70 70 40 48 72 72 1

1/4 9/32 5/16 11/32 3/8 7/16 1/2 9/16 19/32 5/8 11/16 3/4 25/32 13/16 7/8 15/16

1 1 1/16 1 1/8 1 3/16 1 1/4 1 5/16 1 3/8 1 7/16 1 1/2 1 5/8 1 13/16 1 7/8 2

10 10 10 9 14 17 20 26 32 41 57 68 74 88 116 144 175 204 217 255 286 327 380 398 504 617 796 770 961 1021 1343 1779 1817

€

2 Sets: Combination spanners OPEN-BOX ‘

Code

R g

Content mm/“

€

‘

96 40 08 13 96 40 08 01 96 40 08 08 96 40 08 02 96 40 08 03 1

96 40 08 16 96 40 08 04 96 40 08 05 1

96 40 48 03 96 40 48 12 96 40 48 04

‘

13/6 3) 13/9 13/10KT 1) 13/11 13/15

7; 8; 10; 13; 17; 19 9; 10; 11; 12; 13; 14; 17; 19; 22 8; 9; 10; 11; 12; 13; 14; 15; 17; 19 8; 9; 10; 11; 12; 13; 14; 15; 17; 19; 22 6; 7; 8; 9; 10; 11; 12; 13; 17; 19; 22; 24; 27; 30; 32 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 13/16 2) 21; 22; 24 13/17 6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22 2 6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 13/26 ) 19; 20; 21; 22; 23; 24; 25; 26; 27; 28; 29; 30; 32 7/16; 1/2; 9/16; 5/8; 11/16; 3/4; 13/16; 7/8 13a/8 13a/10KT 1) 1/4; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16; 5/8; 11/16; 3/4 13a/20 2) 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16; 19/32; 5/8; 11/16; 3/4; 25/32; 13/16; 7/8; 15/16; 1; 1 1/16; 1 1/8; 1 1/4

457 58.60 758 86.55 746 92.85 915 102.75 2236 189.10 1620 165.70 1493 167.35 4705 380.55 959 100.95 750 102.15 3210 288.20

‘

STAHLWILLE AS-Drive The rings of STAHLWILLE combination spanners and double ended ring spanners are equipped with the AS-Drive* profile: this permits high transmission of forces to the lands of nuts and bolts without damaging them. No longer will you have to worry about stripping the corners off nuts and bolts.

Standard packing: clear view wallet. (Coloured plastic-wallets: page 68) 1 ) carton with clear view cover 2 ) packed in carton 3 ) in convenient clip holder ‘

ES 13/10, 6–15 mm

175 x 350 x 40 mm, 10 pieces ‘

Code

R g

€

525

82.40

‘

*Anti-Slip-Drive

96 83 81 27 ‘

No 13

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15 mm

‘

83 81 20 23

Empty tray

105

8.15

‘

Spanners ES 13/8, 16–24 mm

TCS 13/17, 6–24 mm MF

x ö 175 x 350 x 54 mm, 8 pieces ‘

R g

Code ‘

96 83 81 28

1440

€ 119.95

‘

No 13

sizes 16; 17; 18; 19; 20; 21; 22; 24 mm

‘

350 x 350 x 60 mm, 17 pieces ‘

83 81 20 24

Empty tray

112

R g

8.15

‘

Code ‘

96 83 03 51

ES 13/5, 27–32 mm

1552

€ 207.35

‘

No 13

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24 mm

‘

TCS 13/21, 6–34 mm

x ö

530 x 350 x 30 mm, 5 pieces ‘

R g

Code ‘

96 83 81 04

2280

€ 150.40

‘

530 x 350 x 75 mm, 21 pieces ‘

No 13

R g

sizes 27; 28; 29; 30; 32 mm

‘

83 81 20 40

Empty tray

287

21.60

Code ‘

€

‘

96 83 01 74

3571

318.95

‘

No 13

TCS 13/18, 6–24 mm

x ö

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24; 27; 30; 32; 34 mm

‘

TCS 13/25, 5.5–34 mm

x ö

530 x 350 x 35 mm, 18 pieces ‘

R g

Code ‘

96 83 81 83

1850

€ 217.25

‘

530 x 350 x 75 mm, 25 pieces ‘

No 13

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24 mm

R g

Code ‘

€

‘

96 83 20 96 ‘

No 13

TCS 13/17, 6–24 mm

x ö

‘

350 x 350 x 60 mm, 17 pieces ‘

R g

Code ‘

96 83 01 64

1615

€ 198.35

‘

No 13 ‘

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24 mm

4550 399.30 sizes 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 23; 24; 27; 29; 30; 32; 34 mm

TCS 12+13+14/29

x ö

Combination spanners OPEN-BOX, long

DIN 3113 form B/ ISO 7738 form B, Chrome Alloy Steel, chrome plated.

530 x 350 x 80 mm, 29 pieces ‘

R g

Code

€

‘

96 83 01 93

3752

389.65

‘

No 12

sizes 5.5; 12; 14 mm (2x)

‘

No 13

Code

sizes 7; 11 mm (2x); 6; 8; 9; 10; 12; 13; 14; 15; 16; 17; 18; 19; 20; 22; 24; 30; 32; 36 mm (1x) size 17 mm

40 10 06 06 40 10 07 07 40 10 08 08 40 10 09 09 40 10 10 10 40 10 11 11 40 10 12 12 40 10 13 13 40 10 14 14 40 10 15 15 40 10 16 16 40 10 17 17 40 10 18 18 40 10 19 19 40 10 20 20 40 10 21 21 40 10 22 22 40 10 24 24 40 10 27 27 40 10 30 30 40 10 32 32 40 10 34 34 40 10 36 36 40 10 41 41 1

‘

TCS 13a/19

x ö

350 x 350 x 55 mm, 19 pieces

‘

R g

Code

€

‘

96 83 87 78

2000

d a1 a2 t mm mm mm mm

6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 24 27 30 32 34 36 41

9.5 10.8 12.1 13.3 14.6 15.9 17.3 18.6 20.1 21.4 22.7 24.1 25.5 27 28.5 29.8 31.3 34.3 38.6 42.6 45.2 48 50.8 57.8

‘

No 14

A L b mm mm mm

255.80

‘

125 135 145 155 165 180 180 195 210 215 230 240 255 265 280 280 300 330 385 415 430 460 480 560

14 16 17.5 19 21 23.5 25.5 27.5 29.5 31 33 35 37 39.5 41.5 43 45 50 56 63 67 72 74 84

4.5 5 5 5.5 5.5 6 6 6.5 6.5 7 7 7.5 7.5 8 8 8.5 8.5 9.5 10.5 12 12 13 13 14

6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 13 14 14 16 18 18 18 19 20

R g S

7 18 8 25 8 28 9 34 9 43 10 55 10 61 11 83 11 88 13 109 14 108 15 151 16 151 18 190 19 219 19 244 20 268 22 363 24 502 26 645 27 666 27 900 28 951 32 1322

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 1 1 1

€ 6.75 6.75 6.55 7.60 7.20 7.65 8.20 8.95 9.35 10.30 11.10 11.70 13.00 13.50 14.40 15.20 16.80 19.10 21.50 26.90 28.50 41.50 48.60 61.50

‘

sizes 3/16; 7/32; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16; 19/32; 5/8; 11/16; 3/4; 25/32; 13/16; 7/8; 15/16; 1“

No 13a ‘

TCS 13a/23

x ö

STAHLWILLE AS-Drive

530 x 350 x 55 mm, 23 pieces ‘

R g

Code

€

‘

96 83 08 85

2726

332.65

‘

No 13a ‘

sizes 3/16; 13/64; 7/32; 15/64; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16; 19/32; 5/8; 11/16; 3/4; 25/32; 13/16; 7/8; 15/16; 1; 1 1/16; 1 1/8“

The rings of STAHLWILLE combination spanners and double ended ring spanners are equipped with the AS-Drive* profile: this permits high transmission of forces to the lands of nuts and bolts without damaging them. No longer will you have to worry about stripping the corners off nuts and bolts. *Anti-Slip-Drive

Spanners TCS 14/5, 17–21 mm

x ö 175 x 350 x 30 mm, 5 pieces ‘

R g

Code

€

‘

96 83 81 88

1065

86.40

‘

No 14

sizes 17; 18; 19; 20; 21 mm

‘

TCS 14/8, 8–16 mm

x ö

Sets: Combination spanners OPEN-BOX, long ‘

Code

Content mm

R g

€

10; 13; 17; 19; 22; 24 10; 11; 13; 17; 19; 22; 24; 27; 30 8; 10; 11; 12; 13; 14; 16; 17; 18; 19 8; 9; 10; 11; 12; 13; 14; 15; 17; 19; 22 6; 7; 8; 9; 10; 11; 12; 13; 17; 19; 22; 24; 27; 30; 32 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24; 27; 30 6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22

1175 2395 1235 1465

77.25 133.30 103.20 107.80

‘

96 40 10 08 96 40 10 09 96 40 10 07 96 40 10 06 96 40 10 04 1

14/6 ) 14/9 2) 14/10 KT 1) 14/11 14/15

96 40 10 10 14/15N 2) 96 40 10 05 14/17

175 x 350 x 30 mm, 8 pieces ‘

Code

R g

€

660

87.90

‘

3400 197.65

96 83 81 89 ‘

No 14 3165 200.45

‘

1874 175.00

15*

‘

Standard packing: clear view wallet 1 ) packed in plastic with transparent cover 2 ) packed in carton

sizes 8; 10; 11; 12; 13; 14; 15; 16 mm

Combination spanners OPEN-BOX

SoftGRIP®

‘

registered design, long, DIN 3113 form B/ISO 7738 form B, Chrome Alloy Steel, chrome plated.

ES 14/10, 6–15 mm

175 x 350 x 39 mm, 10 pieces ‘

R g

Code

‘

€

‘

96 83 81 05

700

87.45

‘

No 14

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15 mm

‘

83 81 20 34

Empty tray

110

8.15

‘

ES 14/8, 16–24 mm

Code 40 11 06 06 40 11 09 09 40 11 10 10 40 11 11 11 40 11 12 12 40 11 15 15 40 11 16 16 40 11 18 18 40 11 19 19 40 11 24 24 40 11 27 27 40 11 30 30 40 11 32 32 40 11 34 34 1

R g

‘

1820

‘

€ 122.95

‘

No 14

sizes 16; 17; 18; 19; 20; 21; 22; 24 mm

‘

83 81 20 35 ‘

Empty tray

6 9 10 11 12 15 16 18 19 24 27 30 32 34

125 155 165 180 180 215 230 255 265 330 385 415 430 460

* to be discontinued

‘

96 83 81 06

L b d a1 a2 t R mm mm mm mm mm mm g S

‘

175 x 350 x 51 mm, 8 pieces Code

A mm

‘

112

8.15

14 19 21 23.5 25.5 31 33 37 39.5 50 56 63 67 72

9.5 13.3 14.6 15.9 17.3 21.4 22.7 25.5 27 34.3 38.6 42.6 45.2 48

4.5 5.5 5.5 6 6 7 7 7.5 8 9.5 10.5 12 12 13

6 8 8 9 9 11 11 12 13 14 16 18 18 18

7 9 9 10 10 13 14 16 18 22 24 26 27 27

18 34 45 55 60 109 120 160 200 363 484 625 666 900

10 10 10 10 10 10 10 10 10 5 5 5 5 1

€ 6.45 7.85 8.35 8.45 9.40 12.20 12.60 14.20 15.20 21.50 24.10 28.20 31.50 48.30

Double ended ring spanners

StahlwilleSTABIL® offset, DIN 838/ISO 10104 (metric sizes), Chrome Alloy Steel, chrome plated.

Sets: Double ended ring spanners ‘

Code

A mm

L mm

d1 mm

d2 a1 a2 t mm mm mm mm

6x7 8x9 8 x 10 10 x 11 10 x 13 12 x 13 13 x 17 14 x 15 16 x 17 17 x 19 18 x 19 18 x 21 19 x 22 20 x 22 21 x 23 21 x 24 22 x 24 24 x 26 24 x 27 25 x 28 27 x 30 27 x 32 30 x 32 30 x 34 36 x 41 46 x 50

165 180 180 200 220 220 245 245 255 270 275 300 300 300 315 330 330 330 330 350 360 360 365 365 440 535

10.5 13.1 13.1 15.8 15.8 18.6 20 21.3 23.9 25.3 26.6 26.6 28 29.4 30.7 30.7 32.1 34.7 34.7 36 38.3 39.3 42.6 42.6 53 65.2

11.8 14.5 15.8 17.2 20 20 25.3 22.6 25.3 28 28 30.7 32.1 32.1 33.4 34.7 34.7 37.3 38.6 40 42.6 47.2 45.4 48 60 73

‘

41 04 06 07 41 04 08 09 41 04 08 10 41 04 10 11 41 04 10 13 41 04 12 13 41 04 13 17 41 04 14 15 41 04 16 17 41 04 17 19 41 04 18 19 41 04 18 21 41 04 19 22 41 04 20 22 41 04 21 23 41 04 21 24 41 04 22 24 41 04 24 26 41 04 24 27 41 04 25 28 41 04 27 30 41 04 27 32 41 04 30 32 41 04 30 34 41 04 36 41 41 04 46 50 1

6 7 7 9 9 9 10 10 11 12 12 12 13 13 13 13 14 14 14 14 15 15 15 15 17 19

7 8 9 9 10 10 12 12 12 13 13 13 14 14 14 14 14 15 15 15 15 16 16 16 18 20

R g S

18 46 20 62 21 61 23 93 25 122 25 126 27 169 27 163 27 181 29 220 29 228 31 279 31 315 31 317 31 312 34 384 34 368 34 427 34 447 34 414 37 595 37 596 37 603 37 670 40 1063 45 1709

€

10 8.05 10 8.30 10 9.65 10 9.00 10 10.70 10 9.65 10 12.30 10 10.40 10 11.30 10 13.30 10 13.10 10 17.00 10 16.40 5 15.70 5 18.90 5 20.30 5 19.40 5 21.50 5 20.20 5 24.10 5 27.00 5 26.00 5 25.60 1 28.80 1 51.00 1 102.00

StahlwilleSTABIL® offset. ‘

Code

Content mm/“

R g

€

930

69.80

1291

85.50

‘

96 41 04 08

20/7N

96 41 04 05

20/8

96 41 04 09

20/9

96 41 04 07

20/10

96 41 04 06

20/12

96 41 44 02

20a/6

96 41 44 05

20a/10

6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 21 x 24 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 24 x 27; 30 x 32 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 21 x 23; 24 x 27; 25 x 28; 30 x 32 1/4 x 5/16; 3/8 x 7/16; 1/2 x 9/16; 5/8 x 3/4; 11/16 x 13/16; 7/8 x 15/16 1/4 x 5/16; 3/8 x 7/16; 1/2 x 9/16; 9/16 x 5/8; 19/32 x 11/16; 5/8 x 3/4; 11/16 x 13/16; 3/4 x 7/8; 25/32 x 13/16; 7/8 x 15/16

1650 105.80 2331 131.30

3137 174.30 1244

89.00

2260 153.80

‘

Standard packing: carton. (Coloured plastic-wallets: page 68) ‘

ES 20/8, 6x7–19x22 mm

‘

20a

Double ended ring spanners

175 x 350 x 30 mm, 8 pieces ‘

‘

Code

A „

L mm

d1 mm

d2 a1 a2 t mm mm mm mm

R g S

180 200 220 245 255 270 300 300 300 330 330 365

11.8 15.8 20 21.3 23.9 23.9 25.3 28 29.4 32.1 34.7 42.6

13.1 17.2 21.3 25.3 25.3 28 30.7 32.1 32.1 34.7 37.3 45.4

61 88 131 168 177 235 280 299 333 363 419 581

‘

41 44 16 20 1/4 x 5/16 41 44 24 28 3/8 x 7/16 41 44 32 34 1/2 x 9/16 41 44 34 36 9/16 x 5/8 41 44 35 38 19/32 x 11/16 41 44 36 40 5/8 x 3/4 41 44 38 42 11/16 x 13/16 41 44 40 44 3/4 x 7/8 41 44 41 42 25/32 x 13/16 41 44 44 46 7/8 x 15/16 41 44 46 48 15/16 x 1 41 44 52 58 1 1/8 x 1 5/16 1

7 9 9 10 11 12 12 13 13 14 14 15

7 9 10 12 12 13 13 14 14 14 15 16

20 23 25 27 27 29 31 31 31 34 34 37

10 10 10 10 10 10 5 5 5 5 5 1

€ 9.90 10.80 12.00 13.30 14.00 15.70 18.70 18.30 19.20 21.90 24.30 29.10

R g

Code

€

‘

96 83 81 67

1266

98.45

‘

No 20

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 21; 19 x 22 mm

‘

83 81 20 83

Empty tray

103

8.35

‘

ES 20/10, 6x7–30x32 mm

‘

530 x 350 x 44 mm, 10 pieces ‘

R g

Code

€

‘

96 83 81 07

2620

152.90

‘

No 20

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 24 x 27; 30 x 32 mm

‘

83 81 20 44

Empty tray

309

21.60

‘

Spanners 12

TCS 20/8, 6x7–19x22 mm

x ö

Small double open ended spanners ELECTRIC

Chrome Alloy Steel, chrome plated.

175 x 350 x 45 mm, 8 pieces ‘

R g

Code

€

‘

96 83 81 92

1300

108.70

‘

No 20

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 21; 19 x 22 mm

‘

Code

‘

TCS 20/8, 6x7–19x22 mm MF

x ö

175 x 350 x 45 mm, 8 pieces ‘

R g

Code 96 83 03 56

€

1323

113.30

‘

No 20

40 06 32 32 40 06 35 35 40 06 04 04 40 06 45 45 40 06 05 05 40 06 55 55 40 06 06 06 40 06 07 07 40 06 08 08 40 06 09 09 40 06 10 10 40 06 11 11 40 06 12 12 40 06 13 13 40 06 14 14 1

‘

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 21; 19 x 22 mm

3.2 3.5 4 4.5 5 5.5 6 7 8 9 10 11 12 13 14

12a

TCS 20/10; 6x7–30x32 mm

b mm

a mm

R g

€

70 70 70 70 78 78 78 91 96 103 105 116 116 131 131

10.5 10.5 10.5 10.5 12.6 12.6 12.6 14.7 16.8 18.9 21 24.2 24.2 28.3 28.3

2 2 2 2 2 2 2 2 3 3 3 3 3 3 3

5 5 5 5 7 7 6 9 16 19 22 27 27 37 36

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

7.00 7.00 6.85 6.85 6.85 6.85 6.85 6.85 6.85 6.85 6.85 7.10 7.65 8.05 9.00

Small double open ended spanners ELECTRIC

‘

x ö

Code

A „

L mm

b mm

a mm

R g

€

5/32 3/16 13/64 7/32

70 70 78 78 78 91 91 96 103 105 116 131 131

10.5 10.5 12.6 12.6 12.6 14.7 14.7 16.8 18.9 21 24.2 28.3 28.3

2 2 2 2 2 2 2 3 3 3 3 3 3

5 5 7 6 6 9 9 16 19 22 28 37 36

10 10 10 10 10 10 10 10 10 10 10 10 10

7.35 7.35 7.35 7.35 7.35 7.35 7.35 7.35 7.50 7.50 7.55 9.00 9.95

‘

40 46 10 10 40 46 12 12 40 46 13 13 40 46 14 14 40 46 15 15 40 46 16 16 40 46 18 18 40 46 20 20 40 46 22 22 40 46 24 24 40 46 28 28 40 46 32 32 40 46 34 34 1

350 x 350 x 45 mm, 10 pieces ‘

R g

€

‘

96 83 01 66

L mm

‘

Code

A mm

‘

2450

15/64 1/4 9/32 5/16 11/32 3/8 7/16 1/2 9/16

‘

162.50

‘

No 20

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 21; 19 x 22; 24 x 27; 30 x 32 mm

‘

Sets: Small double open ended spanners ELECTRIC ‘

Code

‘

Content mm/“

R g

€

96 40 06 53 12/10Pc 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11 161 75.25 96 40 06 51 12/15Pc 3.2; 3.5; 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 296 117.05 96 40 46 54 12a/13Pc 5/32; 3/16; 13/64; 7/32; 15/64; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16 270 109.90 ‘

Pc: in plastic-wallet ‘

130a

Combination spanners

16/5Pc

Set: Combination spanners OPEN-BOX; 3.2–5 mm

P Q

Fed. Spec. GGG-W-636 E, HPQ high performance steel, chrome plated.

‘ ‘

Code

A „

L mm

b mm

d mm

a1 mm

a2 mm

R g S

1/4 9/32 5/16 11/32

105 110 115 120 125 135 150 165

14.2 15.5 17 19 20.5 23 27 30.5

9.8 10.9 12 13.1 14.1 16.2 18.2 20.6

3.6 4.1 4.5 4.9 5.2 6 6.5 7

6 6 7 7 7 8 8.5 8.5

13 16 20 25 32 42 61 78

‘

40 57 16 16 40 57 18 18 40 57 20 20 40 57 22 22 40 57 24 24 40 57 28 28 40 57 32 32 40 57 34 34 1

3/8 7/16 1/2 9/16

10 10 10 10 10 10 10 10

€ 18.60 18.70 19.10 20.10 23.10 24.00 25.00 28.50

‘

130aSP

Spline drive combination spanners

Code

Content mm

R g

€

3.2; 3.5; 4; 4.5; 5

42.45

‘

96 40 09 02 ‘

Pc: in green plastic-wallet ‘

180a

Double ended ring spanners

P Q

short, shallow offset, Fed. Spec. GGG-W-636 E, S.B.A.C. Techn. Spec. T.S. 48 up to size 1/2“, HPQ high performance steel, chrome plated.

MS-33787, MIL-W-8982, HPQ high performance steel, chrome plated.

‘

A „

Code

L d1 d2 a1 a2 t1 t2 R mm mm mm mm mm mm mm g S

‘

Code

Spline A L size „ mm

b mm

d mm

a1 a2 R mm mm g S

14.2 17 20.5 23 27 30.5

10 12.2 14.8 16.5 18.7 20.8

3.6 4.5 5.2 6 6.5 7

‘

40 58 16 16 40 58 20 20 40 58 24 24 40 58 28 28 40 58 32 32 40 58 34 34 1

8 10 12 14 16 18

1/4 5/16 3/8 7/16 1/2 9/16

105 115 125 135 150 165

5.6 6.4 7 8 8.5 8.5

13 21 31 43 59 84

5 5 5 5 5 5

€ 18.70 19.20 23.20 24.10 25.10 28.00

‘

1/4 x 5/16 3/8 x 7/16 1/2 x 9/16 9/16 x 5/8

41 60 16 20 41 60 24 28 41 60 32 34 41 60 34 36

107 122 141 148

10.2 14.6 18.5 20.7

11.8 16.7 20.7 22.6

7 8 7.2 7.4 6.7 7.8 9 10 8.7 9.5 11 12 9.5 10.5 11.5 12.5

26 42 62 87

10 10 10 10

€ 26.10 27.10 29.00 34.30

‘

230a

Double ended ring spanners

P Q

shallow offset, SAE AS 954 (dimensions and test loads); Fed. Spec. GGG-W-636E, S.B.A.C. Techn. Spec. T.S. 48 up to size 1/2“, HPQ high performance steel, chrome plated.

Combination spanners OPEN-BOX

ISO 3318, Chrome Alloy Steel, chrome plated.

‘

Code

A „

‘

Code

A mm

L mm

b mm

d mm

a1 mm

a2 mm

R g

€

3.2 3.5 4 4.5 5

75 75 85 85 95

10 10 12.5 12.5 14

6.6 6.6 7.8 7.8 9.8

3 3 3 3 3

3.2 3.2 3.2 3.2 3.2

6 6 9 8 11

10 10 10 10 10

8.30 8.30 8.35 8.35 8.35

‘

40 09 32 32 40 09 35 35 40 09 40 40 40 09 45 45 40 09 50 50 1

‘

41 61 16 20 41 61 20 22 41 61 20 24 41 61 24 28 41 61 28 32 41 61 32 34 41 61 34 36 41 61 36 40 41 61 38 40 41 61 42 44 41 61 46 48 41 61 48 50 41 61 52 56 1

1/4 x 5/16 5/16 x 11/32 5/16 x 3/8 3/8 x 7/16

L d1 d2 a1 a2 t1 t2 R mm mm mm mm mm mm mm g S

180 195 195 215 7/16 x 1/2 225 1/2 x 9/16 235 9/16 x 5/8 245 5/8 x 3/4 274 11/16 x 3/4 275 13/16 x 7/8 301 15/16 x 1 340 1 x 1 1/16 368 1 1/8 x 1 1/4 403

10.2 11.9 11.9 14.6 16.7 19.5 20.7 22.6 25.4 29.5 34.1 36.5 40.8

11.9 13.5 14.6 16.7 19.5 20.7 22.6 27.5 27.5 31.7 36.5 38.6 45

5.2 7 6 7.9 8.7 9.1 9.5 11.1 11.1 13.5 14.5 15 16

6 8 7.9 8.7 9.1 9.5 11.5 12 12 14.5 15 16 18

7.9 8 10.8 11.4 11.9 12.2 13.8 14.8 15.2 19 22 23 25

8.8 9 12.4 11.7 12.6 12.9 13.9 15.8 15.8 20 23 24 27

36 45 54 74 105 119 122 156 158 175 375 460 620

10 10 10 10 10 10 10 10 10 5 5 5 5

€ 20.70 23.30 22.10 22.30 23.80 25.80 30.00 31.00 35.40 39.70 44.80 49.20 52.50

‘

Spanners 23

Double ended ring spanners

StahlwilleSTABIL®

shallow offset, DIN 897/ISO 10104 (metric sizes), Chrome Alloy Steel, chrome plated.

straight, DIN 837/ISO 10103, Chrome Alloy Steel, chrome plated.

‘

Code

A mm

L mm

d1 d2 a1 a2 t1 t2 R mm mm mm mm mm mm g S

6x7 8x9 10 x 11 12 x 13 14 x 15 16 x 17 17 x 19 18 x 19 20 x 22 21 x 23 24 x 27 30 x 32

170 179 188 203 219 248 250 251 280 328 376 429

9.5 12.1 14.6 17.3 20.1 22.7 24.1 25.5 28.5 29.8 34.3 42.6

‘

41 07 06 07 41 07 08 09 41 07 10 11 41 07 12 13 41 07 14 15 41 07 16 17 41 07 17 19 41 07 18 19 41 07 20 22 41 07 21 23 41 07 24 27 41 07 30 32 1

10.8 13.3 15.9 18.6 21.4 24.1 27 27 31.3 32.9 38.6 45.2

6 7 8.5 9.5 10.5 11.5 12.5 12.5 13.5 13.5 14.5 18

7 8 9.5 10.5 11.5 12.5 13.5 13.5 14.5 14.5 16 18

7 8 9 10 11 14 15 16 19 19 22 26

8 9 10 11 13 15 18 18 20 22 24 27

41 49 66 95 109 144 162 157 223 281 426 608

10 10 10 10 10 10 10 10 5 5 5 5

‘

€ 9.75 9.30 9.90 10.70 12.20 12.80 13.60 14.60 17.50 21.40 22.40 28.30

‘

Code 41 05 06 07 41 05 08 09 41 05 08 10 41 05 10 11 41 05 12 13 41 05 13 17 41 05 14 15 41 05 16 17 41 05 16 18 41 05 17 19 41 05 18 19 41 05 18 21 41 05 19 22 41 05 20 22 41 05 21 24 41 05 24 27 41 05 27 32 41 05 30 32 41 05 30 34 1

23/8

Set: Double ended ring spanners; 6x7–20x22 mm

shallow offset.

A mm

L mm

d1 mm

d2 mm

a mm

R g

100 115 115 130 150 170 165 170 185 185 185 210 210 210 235 290 320 325 325

9.6 12.5 12.5 15.4 18.2 19.5 21 23.8 23.8 25 26.3 26.3 27.6 29 30.5 34.7 38.5 43 43

11 14 15.4 16.6 19.5 25 22.5 25 26.3 27.6 27.6 30.5 32.4 32.4 34.7 38.5 45.5 45.5 48.5

4.5 5.5 6 6 6.5 8 7.5 8 8 8 9 9 9 9 10 11 12 12 12

14 19 18 28 42 57 55 68 74 78 84 107 109 109 128 225 283 289 307

10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5

‘

6x7 8x9 8 x 10 10 x 11 12 x 13 13 x 17 14 x 15 16 x 17 16 x 18* 17 x 19 18 x 19 18 x 21 19 x 22 20 x 22 21 x 24 24 x 27 27 x 32 30 x 32 30 x 34

€ 7.95 7.95 8.20 8.80 9.70 11.40 10.70 11.30 12.40 11.30 11.90 16.60 15.40 14.10 17.70 18.50 25.00 23.80 26.60

‘

* to be discontinued ‘

Sets: Double ended ring spanners

StahlwilleSTABIL®

‘

Code

R g

€

6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22 870

96.75

Content mm

‘

96 41 07 04 ‘

Standard packing: carton. (Coloured plastic-wallets: page 68)

‘

Code

Content mm

R g

‘

96 41 05 03 96 41 05 01

21/7 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22 397 21/10 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 24 x 27; 30 x 32 943

‘

Standard packing: carton (Coloured plastic-wallets: page 68) ‘

€ 74.45 124.70

220

Double ended ring spanners

220aSP

P Q

Double ended ring spanners

extra long, 15° angled, SAE AS 954-E (test loads) (American sizes), HPQ high performance steel, chrome plated.

extra long, with spline-drive profile, 15° angled, MS-33787, MIL-W-8982, HPQ high performance steel, chrome plated.

‘

Code

A mm

L mm

d1 d2 mm mm

a1 mm

a2 mm

‘

41 03 55 07 5.5 x 7 185 41 03 06 08 6 x 8 205 41 03 09 11 9 x 11 250 41 03 10 11 10 x 11 250 41 03 12 14 12 x 14 290 41 03 13 14 13 x 14 290 41 03 17 19 17 x 19 365 41 03 18 19 18 x 19 365 41 03 19 22 19 x 22 408 41 03 20 22 20 x 22 409 1

8.8 9.8 14.2 15.5 18.3 18.7 25 25.5 27.5 28.5

11 12.1 16.7 16.7 20.7 20.7 27.5 27.5 31.5 31.5

5.3 5.6 8 8 9.5 9.5 11 11 13 13

5.8 6 8.7 8.7 9.5 9.5 12 12 14.3 14.3

R g S 28 34 80 80 162 160 296 295 520 515

5 5 5 5 5 5 5 5 5 5

€ 25.40 27.60 28.10 28.10 30.30 34.10 38.10 44.70 50.00 54.50

Code 41 16 07 09 41 16 08 10 41 16 12 14 41 16 16 18 41 16 18 20 41 16 22 24 41 16 26 30 41 16 28 32 1

L mm

d1 d2 a1 mm mm mm

a2 R mm g S

7x9 8 x 10 12 x 14 16 x 18 18 x 20 22 x 24 26 x 30 28 x 32

7/32 x 9/32 1/4 x 5/16 3/8 x 7/16 1/2 x 9/16

185 205 250 290 9/16 x 5/8 315 11/16 x 3/4 365 13/16 x 15/16 410 7/8 x 1 430

9.4 10.4 14.9 19 21 25 29.5 32

5.8 6 8.7 9.5 11 12 14.3 15

11.5 12.4 17 21 23 27.5 34 36.5

5.3 5.6 8 9.5 10 11 13 13.5

23 33 79 161 205 310 496 582

5 5 5 5 5 5 5 5

€ 23.50 25.60 28.20 33.40 38.00 43.60 48.70 53.00

‘

20TX*

‘

220a

Spline A size „

‘

Double ended ring spanners

for external TORX® screws, offset, Chrome Alloy Steel, chrome plated.

Double ended ring spanners

‘

Code

A „

L mm

d1 d2 mm mm

‘

41 43 14 16 41 43 16 20 41 43 24 28 41 43 32 34 41 43 36 40 41 43 38 40 1

7/32 x 1/4 1/4 x 5/16 3/8 x 7/16 1/2 x 9/16

184 205 250 290 5/8 x 3/4 363 11/16 x 3/4 365

9 9.9 14 18.5 22.6 25

a1 mm

a2 mm

R g S

9.9 5.3 5.8 29 12.2 5.6 6 33 16 8 8.7 79 21 9.5 9.5 160 27 11 12 298 27 11 12 291

5 5 5 5 5 5

€ 25.30 26.30 28.90 34.10 40.40 44.70

‘

STAHLWILLE HPQ spanners STAHLWILLE HPQ* spanners are manufactured from selected tough steel alloys. The result: extremely high load capacity with exceptionally thin rings. HPQ spanners are free of cadmium and are therefore suitable for use on titanium alloy parts and titanium fasteners as used e.g. in the aerospace industry, where safety is a crucial factor.

Code

L d1 d2 a1 a2 t R mm mm mm mm mm mm g S

size

‘

41 24 11 12 41 24 14 16 41 24 18 20 41 24 22 24

E11 x E14 x E18 x E22 x

E12 E16 E20 E24

196 218 254 298

14.6 17.4 22.6 25.3

15.9 9 18.8 9 24.1 11 29.5 12

9 10 12 13

23 25 27 31

90 132 183 293

1 1 1 1

€ 14.70 19.60 19.60 22.30

‘

* to be discontinued ‘

21TX

Double ended ring spanners

for external TORX® screws, straight, Chrome Alloy Steel, chrome plated.

*High Performance Quality ‘

d1 mm

d2 mm

a1 mm

a2 mm

R g S

41 25 06 08 E6 x E8 115.5 9.6 41 25 10 12 E10 x E12 149.5 13.7 17.8 41 25 14 18 E14 x E18 185 24.7 41 25 20 24 E20 x E24 227

11.6 15.7 22.5 29.2

4.5 6.5 8 10.5

5.5 7.5 9.5 12.5

17 33 71 129

Code

size

L mm

‘

10 10 10 10

€ 10.40 12.30 15.60 20.20

‘

Spanners H Double ended open ring

ES 24/7, 8x10–19x22 mm

spanners, angled

DIN 3118/ISO 3318 (metric sizes), Chrome Alloy Steel, chrome plated.

175 x 350 x 30 mm, 7 pieces ‘

Code

R g

€

835

123.55

‘

96 83 81 71 ‘

No 24

sizes 8 x 10; 10 x 11; 11 x 13; 12 x 14; 14 x 17; 17 x 19; 19 x 22 mm

‘

Code

A mm

L d1 d2 a1 a2 m1 m2 R mm mm mm mm mm mm mm g S

‘

41 08 08 10 41 08 09 11 41 08 10 11 41 08 10 12 41 08 11 13 41 08 12 14 1

8 x 10 9 x 11 10 x 11 10 x 12 11 x 13 12 x 14

145 155 155 160 170 180

17.5 18.5 19.5 19.5 21.5 24

19.5 21.5 21.5 22.5 24 26

7 8.5 8.5 9 8.5 9 8.5 9.5 9 10 9.5 10.5

6.3 7.1 6.7 8.6 7.1 8.6 7.1 9 8.6 10 9 11

39 54 55 59 80 89

10 10 10 10 10 10

‘

€ 14.50 15.30 14.20 14.40 14.40 16.10

83 81 20 86

Empty tray

103

8.35

‘

240

Ratchet wrenches FastRatch

registered design, specially suitable for union nuts. Using a single wrench, it is possible to tighten/loosen both metric and imperial nuts and bolts. Made of hardened and tempered stainless steel.

‘

H Double ended open ring

24a

spanners, angled

‘

Code

A „

L d1 d2 a1 a2 m1 m2 R mm mm mm mm mm mm mm g S

‘

41 48 16 20 41 48 20 24 41 48 24 28 41 48 32 34

1/4 x 5/16 5/16 x 3/8 3/8 x 7/16 1/2 x 9/16

105 145 155 180

16.5 17.5 19.5 24

18 19.5 21.5 26

5.5 7 7 8.5 8.5 9 9.5 10.5

3.7 5 6.3 7.1 7.1 8.6 9.5 11

32 39 57 87

10 10 10 10

€ 20.00 20.00 20.30 22.00

‘

I Double ended open ring

‘

Code

spanners, angled

A mm/“

L mm

b mm

a mm

R g

121.4 133.3 140.4 146.3 168.4 174.6 191.3 201.7 212.8 238.5

16 20 23 25 26.8 29.6 32.8 34.3 36.2 38.5

4 4 5 5 6 6 7 7 7 7

60 70 103 100 154 180 270 310 310 380

1 1 1 1 1 1 1 1 1 1

29.80 30.00 31.20 32.90 33.40 34.10 37.20 38.90 41.40 41.60

R g

€

‘

41 10 08 08 41 10 10 10 41 10 11 11 41 10 12 12 41 10 13 13 41 10 14 14 41 10 16 16 41 10 17 17 41 10 18 18 41 10 19 19

DIN 3118/ISO 3318 (metric sizes), Chrome Alloy Steel, chrome plated.

18 10 11 12 13 14 16 17 18 19

5/16 3/8 7/16 15/32 1/2 9/16 5/8 21/32 11/16 3/4

€

‘

Code

A mm

L d1 d2 a1 a2 m1 m2 R mm mm mm mm mm mm mm g S

‘

41 08 14 17 41 08 16 19 41 08 17 19 41 08 18 21 41 08 19 22 41 08 22 24 41 08 24 27 41 08 27 36 41 08 30 32 1

14 x 17 16 x 19* 17 x 19 18 x 21* 19 x 22 22 x 24 24 x 27 27 x 36 30 x 32

200 220 220 230 230 245 270 300 300

26 29 30 31.5 33 37 40.5 42 48.5

30 33 33 35.5 37 40.5 44.5 54 50.5

10.5 12 12 13 13 15 16 16 20

12 13 13 13.5 15 16 17.5 19 22

11 13 14 14.8 15.8 17 18 20 22

14 15.8 15.8 16.2 17 18 20 27 24

115 10 155 5 151 10 182 5 192 5 251 5 310 5 414 5 455 5

€ 16.10 22.20 18.10 25.00 21.80 24.40 30.50 37.70 39.10

‘

* to be discontinued ‘

I Double ended open ring

24a

spanners, angled

Sets: Ratchet wrenches FastRatch

‘

Code

A „

‘

41 48 36 40 41 48 40 48

5/8 x 3/4 3/4 x 1

L d1 d2 a1 a2 m1 m2 R mm mm mm mm mm mm mm g S 218 232

29 33 12 33 40.2 13

13 12.7 15.8 148 16 15.8 19 199

5 5

‘

€ 25.10 30.60

Code

96 41 10 01

240/5

96 41 10 02

240/6

‘

Content mm/“

‘

10 mm - 3/8“; 11 mm - 7/16“; 14 mm - 9/16“; 1022 17 mm - 21/32“; 19 mm - 3/4“ 8 mm - 5/16“; 10 mm - 3/8“; 13 mm - 1/2“; 14 mm - 9/16“; 17 mm - 21/32“; 19 mm - 3/4“ 1094

175.80 207.80

Ratchet ring spanners

ES 25/7, 7x8–17x19 mm

with bi-hexagon, straight, 22 teeth, chrome plated.

175 x 350 x 30 mm, 7 pieces ‘

R g

Code

€

‘

96 83 81 08

1040

154.55

‘

No 25

sizes 7 x 8; 9 x 10; 10 x 11; 12 x 13; 14 x 15; 16 x 18; 17 x 19 mm

‘

Code

A mm

L mm

d1 mm

d2 mm

a mm

R g

7x8 9 x 10 10 x 11 12 x 13 14 x 15 16 x 18 17 x 19

109 139 170 170 170 205 205

15 20 26 26 26 33 33

17 23 30 30 30 36 36

9 9 12 12 12 12 12

55 80 144 135 126 196 188

1 1 1 1 1 1 1

‘

41 13 07 08 41 13 09 10 41 13 10 11 41 13 12 13 41 13 14 15 41 13 16 18 41 13 17 19 1

83 81 20 38 €

Empty tray

111

8.15

‘

14.40 17.60 21.50 21.50 21.50 23.60 26.30

TCS 25/7

x ö

‘

175 x 350 x 30 mm, 7 pieces

25aN

Ratchet ring spanners

‘

as No 25, but made of solid steel, Fed. Spec. GGG-W-001405.

Code

R g

€

984

165.50

‘

96 83 87 51 ‘

No 25

sizes 7 x 8; 9 x 10; 10 x 11; 12 x 13; 14 x 15; 16 x 18; 17 x 19 mm

‘

25aSP

‘

Code

A „

L mm

d1 mm

d2 a mm mm

R g

109 109 139 174 205 235 235

15 15 20 26 33 36 36

17 17 23 30 36 40 40

65 60 90 164 257 296 281

1 1 1 1 1 1 1

‘

41 56 16 20 41 56 20 22 41 56 24 28 41 56 32 34 41 56 36 38 41 56 40 44 41 56 42 46 1

1/4 x 5/16 5/16 x 11/32 3/8 x 7/16 1/2 x 9/16 5/8 x 11/16 3/4 x 7/8 13/16 x 15/16

9 9 9 12 12 13 12

€ 14.00 25.80 16.10 19.60 23.60 25.10 25.90

Spline drive ratchet ring spanners

straight, 22 teeth, chrome plated.

‘

Code

A „

Spline size

L d1 d2 a mm mm mm mm

R g S

109 139 174 205 235

59 84 153 245 279

‘

41 57 08 10 41 57 12 14 41 57 16 18 41 57 20 22 41 57 24 28 1

8 x 10 12 x 14 16 x 18 20 x 22 24 x 28

1/4 3/8 1/2 5/8

x 5/16 x 7/16 x 9/16 x 11/16 3/4 x 7/8

15 20 26 33 36

17 23 30 36 40

9 9 12 12 13

1 1 1 1 1

€ 15.50 19.60 24.90 29.20 30.50

‘

25B

Ratcheting bit holder

for hexagon bits, magnetic location, reversible heads angled, chrome plated.

Sets: Ratchet ring spanners ‘

Code

Content mm/“

R g

9 x 10; 12 x 13; 14 x 15; 17 x 19 7 x 8; 9 x 10; 10 x 11; 12 x 13; 14 x 15; 16 x 18; 17 x 19 3/8 x 7/16; 1/2 x 9/16; 5/8 x 11/16; 3/4 x 7/8 1/4 x 5/16; 5/16 x 11/32; 3/8 x 7/16; 1/2 x 9/16; 5/8 x 11/16; 3/4 x 7/8; 13/16 x 15/16

556

86.90

1049 1000

160.80 84.40

1271

164.50

‘

96 41 13 02 96 41 13 01

25/4 25/7Pc

96 41 56 02 96 41 56 01

25a/4N 25a/7PcN

€

‘

Standard packing: clear view wallet. Pc: in green plastic-wallet. ‘

Code ‘

41 54 16 20

inside b„ 1/4

L d1 d2 a1 a2 mm mm mm mm mm

x 5/16 138 20

R g

105

€ 24.40

‘

Spanners 26a

Ratchet ring spanners

f Double ended flexi-joint

spanners FLEXI

reversible, with bi-hexagon, angled, 22 teeth, chrome plated.

Chrome Alloy Steel, chrome plated.

‘

Code

A mm

L mm

d1 mm

d2 mm

a1 a2 mm mm

R g S

8x9 10 x 11 10 x 13 12 x 13 14 x 15 16 x 17 16 x 18 17 x 19 18 x 19 20 x 22 21 x 23 24 x 27

201 202 230.5 228 227 247 249 250 246.5 287.5 286.5 349.5

11.9 14.7 14.7 17.2 19.7 22.2 22.2 23.7 24.7 27.3 28.6 32.4

13.4 15.9 18.4 18.4 20.9 23.7 24.7 26.3 26.3 29.8 31.1 36.1

26 30.5 30 33 35 38.5 38.5 39 40 45.5 46.5 50.5

81 102 137 153 197 234 267 277 294 430 447 716

‘

€

‘

Code

A „

L mm

d1 mm

d2 mm

a mm

R g

109 139 170

15 20 26

17 23 30

9 9 12

55 80 126

1 1 1

‘

41 55 16 20 41 55 24 28 41 55 32 34

1/4 3/8 1/2

x x x

5/16 7/16 9/16

€ 16.50 19.00 22.00

‘

Double ended ring spanners STARTER

43 01 08 09 43 01 10 11 43 01 10 13 43 01 12 13 43 01 14 15 43 01 16 17 43 01 16 18 43 01 17 19 43 01 18 19 43 01 20 22 43 01 21 23 43 01 24 27 1

ISO 3318, Chrome Alloy Steel, chrome plated.

27.5 32 33.5 33.5 37 39 40 41 41 48 50 60.5

10 10 10 10 10 10 10 5 5 5 5 5

27.20 27.20 33.80 29.70 31.40 35.20 41.00 36.80 39.50 45.40 49.20 70.50

‘

f Double ended flexi-joint

29a

spanners FLEXI

‘

Code

A „

d1 mm

d2 mm

a1 a2 R mm mm g

x 7/16 202 14 x 9/16 227 18.1 x 11/16 249.5 22.1

16 20 24

30.5 32 98 35 37 195 39 40 269

L mm

‘

43 41 24 28 43 41 32 34 43 41 36 38

3/8 1/2 5/8

€

5 29.90 5 34.60 5 40.20

‘

29/7

Set: Double ended flexi-joint spanners FLEXI; 8x9–20x22 mm

‘

Code

A mm

L d1 d2 a r1 r2 R mm mm mm mm mm mm g S

‘

41 09 10 12 41 09 11 13 41 09 14 16 41 09 14 17 41 09 15 17 41 09 16 18 41 09 19 22 1

10 x 12 11 x 13 14 x 16 14 x 17 15 x 17 16 x 18 19 x 22

150 150 179 179 184 200 225

16.5 16.5 21 21 22.5 25.3 28

19.5 19.5 24.5 24.5 25 27.5 32

6.5 6.5 7.5 7.5 7.5 8.5 9

35 35 36 36 38 47 48

60 60 64 64 66 68 67

53 50 91 89 96 130 164

10 10 10 10 10 5 5

€ 19.00 18.00 23.20 21.10 22.60 28.20 30.30

‘

c Double ended flexi-joint spanner

FLEXI

Code 96 43 01 01

R g

Content mm

‘

8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22 mm

1503

€ 235.60

‘

Standard packing: carton.

Chrome Alloy Steel, chrome plated.

‘

ES 29/6, 8x9–18x19 mm

‘

Code

A mm

L d1 d2 a1 a2 mm mm mm mm mm

R g S

6x7

180 9.5

‘

43 01 06 07 ‘

175 x 350 x 30 mm, 6 pieces € 25.70

‘

R g

Code ‘

96 83 81 09

1185

€ 198.35

‘

No 29

sizes 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19 mm

‘

83 81 20 41 ‘

Empty tray

105

8.15

TCS 29/7, 8x9–20x22 mm

x ö

Striking face ring spanners

StahlwilleSTABIL® Chrome Alloy Steel, green painted.

175 x 350 x 40 mm, 7 pieces ‘

R g

Code

€

‘

96 83 01 95

1520

258.10

‘

No 29

sizes 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22 mm

‘

Code

A mm

L mm

b mm

a mm

R g

195 195 200 250 280 300 300 325 355 360 440 440 445 450 455 460 500 505 510

47 52.4 59 65 70 76 82.5 90.5 97 103.5 110 117 124 131 137 146 156 162 174

24 26 29 32 35 38 42 45 48 51 57 57 60 67 72 73 82 82 82

661 684 896 1218 1555 2087 2394 3209 3649 4428 5895 6033 6885 7875 10224 10202 14492 14376 15308

‘

Heavy duty ring spanners

without tubular handle, Chrome Alloy Steel, chrome plated.

42 01 00 32 42 01 00 36 42 01 00 41 42 01 00 46 42 01 00 50 42 01 00 55 42 01 00 60 42 01 00 65 42 01 00 70 42 01 00 75 42 01 00 80 42 01 00 85 42 01 00 90 42 01 00 95 42 01 01 00 42 01 01 05 42 01 01 10 42 01 01 15 42 01 01 20 1

1 ‘

Code

A mm

L1 mm

L2 mm

b mm

a mm

h mm

180 190 200 235 245 250 265 265 280 290 300 345 355 365 375 385 385 410 410 412

555 560 565 730 735 740 750 750 910 920 925 1050 1060 1065 1070 1075 1075 1100 1100 1100

38 41 47 49 54 56 62 62 69 76 81 90 98 105 110 125 125 140 140 143

17 17 18 18 20 21 22 22 23 25.5 28 30.5 33 35.5 38 40.5 40.5 45 45 45

29.5 31.5 33.5 34 35.5 37.5 39.5 39.5 40 42.5 45.5 49 53 55 57.6 59 59 63 63 63

‘

42 02 00 24 24 42 02 00 27 27 42 02 00 30 30 42 02 00 32 32 42 02 00 36 36 42 02 00 38 38 42 02 00 41 41 42 02 00 42 42 42 02 00 46 46 42 02 00 50 50 42 02 00 55 55 42 02 00 60 60 42 02 00 65 65 42 02 00 70 70 42 02 00 75 75 42 02 00 80 80 42 02 00 85 85 42 02 00 90 90 42 02 00 95 95 42 02 01 00 100 1

R g handle S 381 5 1/2 -1 421 1 503 1 712 2 816 2 810 2 910 2 919 2 1192 3 1426 3 1541 3 2260 4 2603 4 2882 4 3058 4 3889 4 3648 4 5238 4 4630 4 4895 4

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

€ 29.90 31.20 33.70 39.70 41.40 58.50 49.40 57.00 56.00 66.50 72.50 93.50 101.00 114.00 132.00 152.00 156.00 290.00 311.00 343.00

‘

No 5a available on request L2 = length with handle No 5 1/2

Tubular handles

for heavy duty ring spanners No 5.

Code

L d size mm mm

A mm

A „

48 03 00 01 48 03 00 02 48 03 00 03 48 03 00 04 ‘

1 2 3 4

460 610 760 860

19 22 25 30

R g S

24–30 32–42 46–56 60–100

1–1 3/16 605 1 1/4–1 11/16 1562 1 3/4–2 1/4 2820 2 3/8–3 7/8 3705

1 1 1 1

€ 27.10 31.60 54.00 71.00

€ 83.50 88.00 105.00 109.00 125.00 140.00 157.00 186.00 207.00 230.00 271.00 300.00 365.00 409.00 489.00 513.00 688.00 720.00 829.00

‘

4205a

Striking face ring spanners

DIN 7444, special steel, grey.

‘

Code

A „

L mm

b mm

a mm

R g

1 1/4 1 5/16 1 1/2 1 5/8 1 11/16 1 13/16 1 7/8 2 2 1/16 2 3/16 2 1/4 2 3/8 2 7/16 2 9/16 2 5/8 2 3/4 2 13/16 2 15/16

190 190 205 230 230 240 240 255 255 270 270 280 280 300 300 330 330 330

52 52 58 66 66 74 74 80 80 86 86 93 93 102 102 110 110 110

17 17 18 20 20 22 22 24 24 25 25 26 26 30 30 33 33 33

350 350 500 700 700 975 975 1075 1075 1320 1340 1600 1600 2300 2300 2900 2900 2900

‘

42 45 00 56 42 45 00 58 42 45 00 64 42 45 00 66 42 45 00 67 42 45 00 69 42 45 00 70 42 45 00 72 42 45 00 73 42 45 00 75 42 45 00 76 42 45 00 78 42 45 00 79 42 45 00 81 42 45 00 82 42 45 00 84 42 45 00 85 42 45 00 87 1

‘

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Additional spanner opening to DIN 7444 on request.

‘

5 1/2

32 36 41 46 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120

S 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

€ 32.80 32.80 41.40 54.50 54.50 59.00 59.00 68.00 68.00 77.50 77.50 81.00 81.00 105.00 105.00 118.00 118.00 127.00

‘

Additional spanner opening on request. ‘

Spanners 61*

4026

Striking sockets

Single-end spanners, adjustable

left-handed, DIN 3117/ISO 6787, A shape, jaw offset 15°, Chrome-Vanadium, gunmetal finish.

They may be extended by adding any number of similar sockets, to reach deep seated bolts. Equal inside and outside hexagons, Chrome Alloy Steel, chrome plated.

‘

Code

A L size max. mm mm

b mm

a mm

R g

4 6 8 10 12 15 18

33 48 60 71 83 103 120

9.5 50 12 138 13.5 247 16 397 19 699 25 1324 30 2076

‘

40 26 00 04 40 26 00 06 40 26 00 08 40 26 00 10 40 26 00 12 40 26 00 15 40 26 00 18 1

‘

Code

A mm

L mm

d mm

a „

R g

65 82.5 146

1 1 1 1/2

‘

06 03 00 46 06 03 00 60 07 03 01 05

46 60 105

82 95 155

873 1673 9189

S 1 1 1

€

114 159 206 257 309 384 460

S 5 5 5 5 5 1 1

€ 18.20 19.60 23.20 28.80 39.10 62.50 99.00

‘

147.00 187.00 1149.00

‘

13 20 24 29 34 43 53

4204

Striking face open ended spanners

DIN 133, Special Tool Steel, grey finish.

* to be discontinued ‘

4004

Single-end spanners

DIN 894, Special Tool Steel, grey finish. ‘

Code

A mm

L mm

b mm

a mm

R g

16 17 17 17.5 18.5 20 21 23 24.5 27 30 30 34 34 38 38 44 44

321 451 424 698 923 1245 1445 2057 2559 3285 4573 4163 6059 5871 7600 7600 11500 11200

‘

Code

A mm

L mm

b mm

a mm

R g

24 27 30 32 36 41 46 50 55 60 65 70 75 80 85 90 95

215 238 261 273 300 335 369 412 457 492 528 572 608 645 690 690 847

50 56 62 66 74 83.5 93 102 112 122 132 142 152 162 173 173 195

8.9 9.8 10.8 11.8 12.8 12.8 14.8 17 18 18 19 20 21 22 23 23 25

147 193 268 315 421 555 770 1003 1267 1650 2012 2425 2758 2963 3717 3570 5943

‘

40 04 02 40 40 04 02 70 40 04 03 00 40 04 03 20 40 04 03 60 40 04 04 10 40 04 04 60 40 04 05 00 40 04 05 50 40 04 06 00 40 04 06 50 40 04 07 00 40 04 07 50 40 04 08 00 40 04 08 50 40 04 09 00 40 04 09 50 1

S 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

€ 6.50 7.40 8.55 9.75 13.50 17.40 21.90 28.10 30.30 38.80 48.60 57.00 72.50 88.00 111.00 129.00 184.00

‘

4025

Single-end spanners, adjustable

right-handed, DIN 3117/ISO 6787, B shape, jaw offset 22°, Chrome Vanadium, chrome plated.

‘

Code

A L size max. mm mm

b mm

a mm

R g

4 6 8 10 12 15 18

33 48 60 71 83 103 120

9.5 53 12 123 13.5 241 16 399 19 708 25 1287 30 2105

‘

40 25 00 04 40 25 00 06 40 25 00 08 40 25 00 10 40 25 00 12 40 25 00 15 40 25 00 18 1

‘

13 20 24 29 34 43 53

114 159 206 257 309 384 460

42 04 00 27 42 04 00 30 42 04 00 32 42 04 00 36 42 04 00 41 42 04 00 46 42 04 00 50 42 04 00 55 42 04 00 60 42 04 00 65 42 04 00 70 42 04 00 75 42 04 00 80 42 04 00 85 42 04 00 90 42 04 00 95 42 04 01 00 42 04 01 05

S 5 5 5 5 5 1 1

€ 19.70 21.10 25.10 31.20 41.50 67.50 106.00

‘

27 30 32 36 41 46 50 55 60 65 70 75 80 85 90 95 100 105

180 190 190 215 235 255 275 300 320 342 375 375 408 408 445 445 485 485

56 62 62 76 86 98 105 116 128 138 154 154 174 174 194 194 215 215

S 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

€ 18.50 19.70 21.20 28.50 35.00 47.50 53.50 63.50 68.50 91.50 113.00 123.00 157.00 168.00 204.00 221.00 355.00 409.00

10750

Box spanners

ES 10750/10, 6x7–20x22 mm

DIN 896 Type B, made of seamlessly drawn precision steel tubing, recessed at both ends, Chrome Alloy Steel, surface polished and chrome plated.

175 x 350 x 30 mm, 10 pieces ‘

R g

‘

Code

A mm

L mm

d1 mm

d2 mm

R g

6x7 8x9 10 x 11 12 x 13 14 x 15 16 x 17 17 x 19 18 x 19 20 x 22 21 x 23 24 x 26 24 x 27 30 x 32 32 x 36 36 x 41 41 x 46 46 x 50 55 x 60

110 110 120 140 140 150 160 160 170 170 190 190 200 220 220 240 240 240

7.52 12.2 14.2 17.2 19.2 22.2 24.2 25.2 27.2 28.2 32.2 32.2 39.2 42.2 47.2 53.2 58.5 70.2

10.5 26 13.2 30 15.2 48 18.2 68 20.2 78 23.2 123 26.2 147 26.2 148 29.3 200 30.2 191 34.2 293 35.2 289 42.3 382 46.2 535 52.5 662 59.2 750 63.5 959 76.2 1125

‘

43 32 06 07 43 32 08 09 43 32 10 11 43 32 12 13 43 32 14 15 43 32 16 17 43 32 17 19 43 32 18 19 43 32 20 22 43 32 21 23 43 32 24 26 43 32 24 27 43 32 30 32 43 32 32 36 43 32 36 41 43 32 41 46 43 32 46 50 43 32 55 60 1

S 10 10 10 10 10 10 10 10 5 5 5 5 5 2 2 2 2 2

€ 4.50 5.20 5.80 6.20 6.65 8.25 9.55 9.55 9.90 9.95 13.20 13.20 18.00 25.10 30.80 37.10 67.00 103.00

Code

€

‘

96 83 81 68

1132

90.80

‘

No 10750

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22 mm

No 10750 1/2

sizes 6; 7

‘

83 81 20 84

Empty tray

103

8.35

‘

10751

Box spanners

double ended, forged Chrome Vanadium Steel, bored out, polished heads, chrome plated.

‘

A mm

L mm

d1 mm

d2 mm

E mm

R g S

6x7 8x9 10 x 11 12 x 13 14 x 15 16 x 17 18 x 19 20 x 22 21 x 23 24 x 27 30 x 32

110 120 130 140 150 160 170 180 185 190 200

9.5 11.8 14.4 17 19.5 21.8 24.4 27.3 28.5 32.2 39

10.5 13 16 18.4 20.8 23 26 30 31 36 41.5

8 9 11 13 14 16 18 20 21 24 30

39 55 72 116 147 193 225 328 340 436 619

‘

Code ‘

43 20 06 07 43 20 08 09 43 20 10 11 43 20 12 13 43 20 14 15 43 20 16 17 43 20 18 19 43 20 20 22 43 20 21 23 43 20 24 27 43 20 30 32 1

€

10 10 10 10 10 10 10 5 5 5 5

16.10 16.10 16.60 18.20 22.80 25.40 29.00 31.30 34.50 43.00 81.50

‘

ES 10751/10, 6x7–20x22 mm

175 x 350 x 30 mm, 10 pieces

Sets: Box spanners

‘

Code

Content mm

R g

‘

96 43 12 01 10750/7 96 43 12 04 10750/11 ‘

8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22 725 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 21 x 23; 24 x 27; 30 x 32 1862

R g

Code

€

‘

€

96 83 81 69

1586

210.25

‘

No 10751

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22 mm

No 10750 1/2

sizes 6; 7

51.55 ‘

‘

97.20

83 81 20 84

Empty tray

103

8.35

‘

10750 1/2

Tommy bars

for No 10750 and No 10751, stepped.

‘

Code

size

‘

48 01 00 06 48 01 00 07 48 01 00 08

6 7 8

for No 10751 A mm

L mm

R g S

6 x 7–14 x 15 6 x 7–16 x 17 16 x 17–24 x 27 18 x 19–30 x 32 – 30 x 32–55 x 60

180 320 630

57 338 1480

for No 10750 A mm

1 1 1

€ 10.90 15.50 39.80

‘

L = Length ‘

Certified to DIN EN ISO 9001

After STAHLWILLE was certified, as one of the very first companies back in 1990, to DIN EN ISO 9002, our Quality Assurance System was also certified to DIN EN ISO 9001 in 1992.

Sockets, Socket sets, Accessories for manual drives

STAHLWILLE sets of socket spanners and inserts... The professionals in industry and the trades are under pressure to work quickly, accurately and economically. Which is why they make heavy demands on their tools. Due to the numerous technical innovations incorporated in them, STAHLWILLE ratchets and sockets make a valuable contribution to the prevention of both mistakes and injuries. By using ratchets, adaptors and inserts made by STAHLWILLE, professional tradesmen are quite simply “making sure”. It does not matter whether it is a full set of tools or individual components – users can be sure they will get top-of-the-range quality every time. This is guaranteed by adherence to the closest tolerances during production and stringently applied quality assurance measures in accordance with DIN EN ISO 9001.

The legendary reliability and precision of these tools is enhanced by a large number of user-friendly features. Non-slip, ergonomically manufactured 2-component handles facilitate strain-free working. Slim-design sockets enable access to awkward places. The QuickRelease system ensures full control over the joint between the ratchet, the adaptors and the sockets. Sculpted chemical-resistant cut-outs in special PE foam inlays prevent tools rattling and sliding around.

Safety advantage 1 STAHLWILLE QuickRelease system The problem: imagine what happens if a tool falls into an inaccessible place during repair or overhaul work. The consequences: arduous, costly search and recovery, possibly involving disassembly of an aeroengine or machine. The solution: the safety lock built into the QuickRelease system prevents damage to workpieces and guarantees secure, rapid connection of all individual components to form a single combined unit. Nothing can get lost because it is not possible to inadvertently release a tool. To release a tool, it is first necessary to press the release button deliberately. Even if you have oily or greasy hands, attaching and separating the individual components is so simple it noticeably smoothes your workflows.

Safety advantage 2

AS - drive

STAHLWILLE AS-Drive

The tolerances on the jaw sizes and square drives of these cold-extruded sockets are as close as if they had been broached. This prevents them slipping off the heads. The consequences: minimum wear on both screws and tools.

The problem: removing heavily corroded screws requires the application of considerable force. The socket slips off the head of the screw. The consequences: uncontrolled movements cause injuries and damage to both the workpiece and the tools. The solution: STAHLWILLE sockets are equipped with the AS Drive* profile. This permits high transmission of forces to the lands of nuts and bolts without damaging them. The risk of injury is minimised and the corners of the screw heads and nuts are no longer damaged. *AS-Drive = Anti-Slip-Drive

provide guaranteed safety and efficiency.

Set No 45/14/5iQR in sturdy plastic case

Ergonomically designed 2-component handle made of impact-resistant, skydrol resistant plastic. All metal parts are made of high-grade steel (Chrome Alloy Steel, chrome plated). Firm seating and yet easy release of sockets and adaptors. Wear parts can be easily replaced using sets of spares for sockets. Separate pawl to switch from clockwise to anticlockwise.

Safety advantage 3 STAHLWILLE HPQ inserts

Some sets of STAHLWILLE socket spanners are supplied in sturdy plastic cases.

The problem: although there is hardly enough room to move, you still have to apply considerable torque to loosen a stubborn screw. The consequences: many of the sockets available are useless simply because their wall thickness makes them impracticable in awkward places. The solution: STAHLWILLE HPQ* sockets are manufactured from selected tough steel alloys. These sockets will not slip off the head of the screw, nor will they stretch when subjected to heavy loads. Their extremely thin walls and unbelievably high load capacity are simply exemplary. HPQ sockets are free of cadmium and are therefore suitable for use on titanium alloy parts and titanium fasteners as used e.g. in the aerospace industry, where safety is a crucial factor. They meet these aerospace standards: E DIN EN 3709, E DIN EN 3710, SAE AS 954-E, S.B.A.C. AS 40605/40606, MS-33787, MIL-W-8982. *HPQ = High Performance Quality

6.3

Sockets, Socket sets

1/4''

f Sockets

40D

40aD/10CL

P Q

ISO DIN 1174-1 3120

Set: Sockets with clip strip

P Q

metric sizes: DIN 3124/ISO 2725-1, E DIN EN 3709, ASME B 107.5M, American sizes: ASME B 107.1, Fed. Spec. GGG-W-641, SAE AS 954-E (test loads), HPQ high performance steel, chrome plated.

Content: 3/16; 7/32; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16'' 1 clip strip No 40CL-2

‘

Code

R g

€

206

50.60

‘ ‘

A mm

d1 d2 mm mm

d3 L t1 t2 R mm mm mm mm g S

5 5.5 6 7 8 9 10 11 12 13 14

7.9 8.5 9.2 10.7 11.6 12.8 14.3 15.5 16.5 17.8 18.8

4 4.5 5 6 7 8 9 10 11 12 13

‘

01 03 00 05 01 03 00 55 01 03 00 06 01 03 00 07 01 03 00 08 01 03 00 09 01 03 00 10 01 03 00 11 01 03 00 12 01 03 00 13 01 03 00 14 1

10.7 10.7 10.7 10.7 11.6 12.8 14.3 15.5 16.5 17.8 18.8

23 4.5 23 6 23 6 23 6.5 23 8 23 8 23 8 23 9 23 9.5 23 9.5 24 10

15 15 15 13.4 13.1 12.8 14.9 14.6 14.3 14 14.7

9 9 9 10 11 13 17 19 23 25 32

10 10 10 10 10 10 10 10 10 10 10

96 01 53 10 ‘

€ 4.00 3.95 3.95 3.95 3.95 4.15 4.15 4.30 5.05 5.05 5.20

P Q

metric sizes: DIN 3124/ISO 2725-1, ASME B 107.5M, E DIN EN 3709 (test loads), American sizes: ASME B 107.1, Fed. Spec. GGG-W-641, SAE AS 954-E (test loads), HPQ high performance steel, chrome plated.

‘

f Sockets

40aD ‘

Code

A ''

d1 d2 d3 mm mm mm

‘

01 53 00 10 01 53 00 12 01 53 00 14 01 53 00 16 01 53 00 18 01 53 00 20 01 53 00 22 01 53 00 24 01 53 00 28 01 53 00 32 01 53 00 34 1

5/32 3/16 7/32 1/4 9/32 5/16 11/32 3/8 7/16 1/2 9/16

6.7 7.6 8.6 9.4 10.7 11.6 12.7 13.7 15.8 17.3 18.8

10.7 10.7 10.7 10.7 10.7 11.6 12.7 13.7 15.8 17.3 18.8

3.2 4 5 5.5 6.6 7 8.1 8.3 10 11.5 13.1

e Sockets

Code

t1 t2

L t1 t2 R mm mm mm g S 23 3.5 23 4.5 23 6 23 6 23 6.5 23 8 23 8 23 8 23 9 23 9.5 24 10

‘

15 15 15 15 13.2 13.1 13.3 13.3 14.6 14.1 14.7

7 9 9 9 10 11 13 16 21 27 31

10 10 10 10 10 10 10 10 10 10 10

‘

€ 4.25 4.10 4.15 4.15 4.15 4.25 4.40 4.40 4.75 5.25 5.40

Code 01 01 00 03 01 01 00 32 01 01 00 35 01 01 00 04 01 01 00 45 01 01 00 05 01 01 00 55 01 01 00 06 01 01 00 07 01 01 00 08 01 01 00 09 01 01 00 10 01 01 00 11 01 01 00 12 01 01 00 13 01 01 00 14 1

STAHLWILLE AS-Drive STAHLWILLE sockets are equipped with the AS-Drive* profile: this permits high transmission of forces to the lands of nuts and bolts without damaging them. No longer will you have to worry about stripping the corners off nuts and bolts. *Anti-Slip-Drive

d2 d3 mm mm

L t1 t2 R mm mm mm g S

3 3.2 3.5 4 4.5 5 5.5 6 7 8 9 10 11 12 13 14

10.7 10.7 10.7 10.7 10.7 10.7 10.7 10.7 10.7 11.6 12.8 14.3 15.5 16.5 17.8 18.8

23 2 23 2 23 2.5 23 3.5 23 4 23 4.5 23 6 23 6 23 6.5 23 8 23 8 23 8 23 9 23 9.5 23 9.5 24 10

5.6 5.6 6 6.7 7.3 7.9 8.5 9.2 10.7 11.6 12.8 14.3 15.5 16.5 17.8 18.8

2.5 2.5 2.5 3.2 3.7 4 4.5 5 6 7 8 9 10 11 12 13

15 15 15 15 15 15 15 15 13.4 13.1 12.8 14.9 14.6 14.3 14 14.7

7 8 8 9 9 9 9 9 10 11 14 17 19 24 26 32

€

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

4.70 4.45 4.25 3.95 3.85 4.00 3.95 3.95 3.95 3.95 4.10 4.20 4.30 4.80 4.50 5.25

€

‘

e Sockets

40a ‘

Code

A ''

d1 mm

d2 d3 mm mm

L t1 t2 R mm mm mm g S

1/8 5/32 3/16 7/32

5.6 6.7 7.6 8.6 9.4 10.7 11.6 12.7 13.7 15.8 17.3 18.8

10.7 10.7 10.7 10.7 10.7 10.7 11.6 12.7 13.7 15.8 17.3 18.8

23 2 23 3.5 23 4.5 23 6 23 6 23 6.5 23 8 23 8 23 8 23 9 23 9.5 24 10

‘

01 41 00 08 01 41 00 10 01 41 00 12 01 41 00 14 01 41 00 16 01 41 00 18 01 41 00 20 01 41 00 22 01 41 00 24 01 41 00 28 01 41 00 32 01 41 00 34 1

‘

A d1 mm mm

‘

1/4 9/32 5/16 11/32 3/8 7/16 1/2 9/16

2.5 3.2 4 5 5.5 6.6 7 8.1 8.3 10 11.5 13.1

15 15 15 15 15 13.2 13.1 13.3 13.3 14.6 14.1 14.7

7 9 9 9 9 10 12 14 16 21 27 31

10 10 10 10 10 10 10 10 10 10 10 10

3.95 4.25 4.10 4.15 4.15 4.15 4.25 4.60 4.60 4.65 5.25 5.30

6.3

1/4''

ISO DIN 1174-1 3120

f Sockets

40DL

40aDL/7

P Q

Set: Sockets

P Q

extra deep, metric sizes: E DIN EN 3710, E DIN EN 3709, DIN 3124/ISO 2725-1, ASME B 107.5M, American sizes: ASME B 107.1, Fed. Spec. GGG-W-641, SAE AS 954-E, HPQ high performance steel, chrome plated.

extra deep Content: 3/16; 1/4; 5/16; 3/8; 7/16; 1/2; 9/16''

‘

Code

A d1 mm mm

d2 d3 mm mm

L t1 t2 R mm mm mm g S

5 5.5 6 7 8 9 10 11 12 13 14

10.7 10.7 10.7 10.7 11.6 12.8 14.3 15.5 16.5 17.8 18.8

50 50 50 50 50 50 50 50 50 50 50

‘

01 24 00 05 01 24 00 55 01 24 00 06 01 24 00 07 01 24 00 08 01 24 00 09 01 24 00 10 01 24 00 11 01 24 00 12 01 24 00 13 01 24 00 14 1

7.9 8.5 9.2 10.7 11.6 12.8 14.3 15.5 16.5 17.8 18.8

4 4.5 5 6 7 8 9 10 11 12 13

4.5 6 6 6.5 8 8 9 10.5 12 12 15

42 42 42 40.9 40.1 39.8 41.9 41.6 41.3 41 40.7

18 16 18 21 23 30 35 40 47 50 57

5 5 5 5 5 5 5 5 5 5 5

€ 12.60 12.70 12.60 12.60 12.60 12.60 12.60 13.20 13.20 13.20 13.20

‘

f Sockets

40aDL ‘

Code

A ''

d1 mm

d2 d3 mm mm

L t1 t2 R mm mm mm g S

5/32 3/16 7/32 1/4

6.7 7.6 8.6 9.4 10.7 11.6 12.7 13.7 15.8 17.3 18.8

10.7 3.2 10.7 4 10.7 5 10.7 5.2 10.7 6.5 11.6 7 12.7 8.1 13.7 8.3 15.8 10 17.3 11.5 18.8 13.1

50 4.5 42 13 50 4.5 42 15 50 6 42 16 50 6 42 19 50 8 40.2 20 50 8 40.1 24 50 9 39.7 26 50 9 39.7 33 50 10.5 41.6 42 50 12 41.1 44 50 15 40.7 55

‘

01 64 00 10 01 64 00 12 01 64 00 14 01 64 00 16 01 64 00 18 01 64 00 20 01 64 00 22 01 64 00 24 01 64 00 28 01 64 00 32 01 64 00 34 1

9/32 5/16 11/32 3/8 7/16 1/2 9/16

5 5 5 5 5 5 5 5 5 5 5

€ 12.20 12.20 12.20 12.20 12.20 12.20 12.20 12.60 12.60 12.60 12.60

‘

Code

R g

€

241

87.00

‘

96 01 64 01 ‘

packed in carton ‘

40aDL/10CL Set: Sockets with clip strip

P Q

Content: 3/16; 7/32; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16'' 1 clip strip No 40CL-2

‘

Code

R g

€

350

129.20

‘

96 01 64 10 ‘

f Sockets

40aDV

‘

P Q

SAE AS 954, S.B.A.C. AS 40605/40606, HPQ high performance steel, chrome plated.

STAHLWILLE HPQ inserts STAHLWILLE HPQ* sockets are manufactured from selected tough steel alloys. The result: they are extremely durable. HPQ sockets are free of cadmium and are therefore suitable for use on titanium alloy parts and titanium fasteners as used e.g. in the aerospace industry, where safety is a crucial factor.

‘

Code

A ''

d1 mm

d2 d3 mm mm

L t1 t2 R mm mm mm g S

7/32 1/4 9/32 5/16

8.6 9.4 10.7 11.6

10.7 10.7 10.7 11.6

31.8 31.8 31.8 31.8

‘

01 65 00 14 01 65 00 16 01 65 00 18 01 65 00 20

5 5.2 6.6 7

6 6 6.5 8

23.8 23.8 22 21.9

12 13 13 15

10 10 10 10

€ 11.60 11.60 11.60 11.60

‘

*High Performance Quality

6.3

Sockets, Socket sets

1/4''

e Sockets

40L

402a/5

P Q

Set: UNIFLEX sockets

P Q

Content: 1/4; 5/16; 3/8; 7/16; 1/2''

extra deep, DIN 3124/ISO 2725-1, ASME B 107.5M, E DIN EN 3710, E DIN EN 3709 (test loads), HPQ high performance steel, chrome plated.

ISO DIN 1174-1 3120

‘

Code

A d1 mm mm

d2 d3 mm mm

L t1 t2 R mm mm mm g S

4 4.5 5 5.5 6 7 8 9 10 11 12 13

10.7 3.2 10.7 3.7 10.7 4 10.7 4.5 10.7 5 10.7 6 11.6 7 12.8 8 14.3 9 15.5 10 16.5 11 17.8 12

50 3.5 42 14 50 4 42 15 50 4.5 42 16 50 6 42 17 50 6 42 18 50 6.5 40.9 24 50 8 40.1 27 50 8 39.8 31 50 9 41.9 38 50 10.5 41.6 43 50 12 41.3 49 50 12 41 56

‘

01 02 00 04 01 02 00 45 01 02 00 05 01 02 00 55 01 02 00 06 01 02 00 07 01 02 00 08 01 02 00 09 01 02 00 10 01 02 00 11 01 02 00 12 01 02 00 13 1

10 10 10 10 10 10 10 10 10 10 10 10

13.70 13.70 12.70 12.70 12.70 12.70 12.60 13.60 13.00 13.60 13.70 13.40

‘

R g

€

101

158.50

Code ‘

96 01 54 01 ‘

f UNIFLEX sockets

402aK

P Q

short version, HPQ high performance steel, chrome plated.

‘

f UNIFLEX sockets

402

P Q

American sizes: SAE AS 954, ASME B 107.1, HPQ high performance steel, chrome plated.

‘

A ''

Code

d1 mm

d2 d3 L mm mm mm

‘

01 54 10 24 01 54 10 34

3/8 9/16

t1 t2 R mm mm g S

13.6 12.7 6.7 34 9.1 12.0 19 12.7 13.1 37.5 10.3 11.8

18 25

5 5

€ 32.50 32.50

‘

Code

A mm

d1 mm

d2 d3 mm mm

L t1 t2 R mm mm mm g S

9.2 10.4 11.6 13 14.2

12.7 12.7 12.7 12.7 12.7

32 5.5 33.5 6 35 8 36 8 38 12

‘

01 14 00 06 6 01 14 00 07 7 01 14 00 08 8 01 14 00 09 9 01 14 00 10 10 1

5 6 6.7 8 9

10 11.5 13 12 14

16 16 17 20 38

5 5 5 5 5

€ 31.70 31.70 31.70 31.70 31.70

for external TORX® screws, HPQ high performance steel, chrome plated.

‘

Code

‘

A ''

d1 mm

‘

01 54 00 14 01 54 00 16 01 54 00 18 01 54 00 20 01 54 00 22 01 54 00 24 01 54 00 28 01 54 00 32

f UNIFLEX sockets

402a

p Sockets

40TX

‘

6.7 7.3 7.9 8.5 9.2 10.7 11.6 12.8 14.3 15.5 16.5 17.8

€

7/32 1/4 9/32 5/16 11/32 3/8 7/16 1/2

8.6 9.6 11 11.6 12.7 13.6 15.7 17.3

d2 d3 L mm mm mm

t1 t2 R mm mm g S

12.7 4.8 32 5.5 10 12.7 5.2 32 5.5 10 12.7 6.4 32 6.5 10 12.7 6.7 35 8 13 12.7 8 35 7.5 11.5 12.7 9 38 8.6 13.1 12.7 10.5 39.5 10.7 15 12.7 12 41.5 11.1 16.5

17 16 19 17 19 20 23 27

5 5 5 5 5 5 5 5

€ 32.50 31.70 32.50 31.70 32.50 31.70 31.70 31.70

Code

size

C mm

E4 E5 E6 E7 E8 E10

3.8 5.6 10.7 4.7 6.7 10.7 5.7 8 10.7 6.2 9.6 10.7 7.5 10.5 11.6 9.4 12.7 12.7

‘

01 27 00 04 01 27 00 05 01 27 00 06 01 27 00 07 01 27 00 08 01 27 00 10 1

‘

d1 d2 d3 L t1 t2 R mm mm mm mm mm mm g S 2 2.8 3.6 3.8 4.3 5.6

23 23 23 23 23 23

4.5 5 5.5 6.5 7 9

15 15 15 15 15 15

8 7 10 10 10 17

10 10 10 10 10 10

€ 5.70 5.70 5.70 5.70 5.70 6.05

6.3

1/4''

ISO DIN 1174-1 3120

h Sockets spline-drive

40aSP

r Screwdriver sockets

41K

for slotted screws, blades to DIN 5264, Chrome Alloy Steel, chrome plated.

MS-33787, MIL-W-8982, HPQ high performance steel, chrome plated.

‘ ‘

Code ‘

Spline A d1 d2 d3 L t1 t2 R size '' mm mm mm mm mm mm g S

01 01 10 07 7 01 01 10 08 8 01 01 10 09 9 01 01 10 10 10 01 01 10 12 12 01 01 10 14 14 1

7/32 1/4 9/32 5/16 3/8 7/16

8.6 9.5 11.2 11.6 13.8 15.7

10.7 5 10.7 5.6 11.2 6.6 11.6 7.1 13.8 8.6 15.7 10.4

22.2 6 22.2 7 22.2 8 22.2 8 23 8.7 25 10.7

14.2 14.2 12.4 12.2 12.6 14.1

7 10 10 12 18 24

1 1 1 1 1 1

€ 23.20 31.00 31.00 31.00 31.60 31.60

‘

Code

r mm

L1 L2 d a b mm mm mm mm mm

R g

9 10 11 12 14

5 5 5 5 5

‘

01 28 00 06 01 28 00 08 01 28 00 10 01 28 00 12 01 28 00 16 1

0.6x3.5 28 0.8x4 28 1x5.5 28 1.2x8 28 1.6x10* 28

16 16 16 16 16

11.6 11.6 11.6 11.6 11.6

0.6 3.5 0.8 4 1 5.5 1.2 8 1.6 10

€ 5.85 5.85 5.85 5.85 6.40

‘

* to be discontinued ‘

40aLSP

h Sockets spline-drive

i INHEX sockets

for socket head screws, DIN 7422, Chrome Alloy Steel, chrome plated.

extra deep bolt clearance, MS-33787, MIL-W-8982, HPQ high performance steel, chrome plated.

‘

Code

B mm

L1 mm

L2 mm

d mm

R g

3 4 5 6

55 55 55 55

30 30 30 30

10.7 10.7 10.7 11.6

14 16 20 26

5 5 5 5

‘

Code ‘

Spline A d1 d2 d3 L t1 t2 R size '' mm mm mm mm mm mm g S

01 02 10 07 7 01 02 10 08 8 01 02 10 10 10

7/32 1/4 5/16

8.6 10.7 5 50.8 9.5 10.7 5.6 50.8 11.6 11.6 7.1 50.8

6 8 8

42.8 42.8 40.8

18 24 27

1 1 1

€ 31.10 32.60 33.60

01 05 00 03 01 05 00 04 01 05 00 05 01 05 00 06 ‘

i INHEX sockets

‘

44a 402aSP

h Uniflex sockets spline-drive

‘

Code

01 45 00 04 01 45 00 05 01 45 00 06 01 45 00 07 01 45 00 08 01 45 00 09 01 45 00 10 01 45 00 12 01 45 00 14 01 45 00 16 1

‘

Code ‘

B ''

L1 mm

L2 mm

d mm

R g

1/16 5/64 3/32 7/64

55 55 55 55 55 55 55 55 55 55

30 30 30 30 30 30 30 30 30 30

10.7 10.7 10.7 10.7 10.7 10.7 10.7 10.7 10.7 11.6

11 12 14 17 12 13 14 17 19 24

5 5 5 5 5 5 5 5 5 5

‘

MS-33787, MIL-W-8982, HPQ high performance steel, chrome plated.

Spline A d1 d2 d3 L t1 t2 R size '' mm mm mm mm mm mm g S

01 54 20 16 8 01 54 20 20 10

1/4 5/16

9.5 12.7 5.6 32 11.6 12.7 7.1 35

6.4 9.8 8 13

16 18

5 5

€ 9.00 9.00 9.00 9.00

1/8 9/64 5/32 3/16 7/32 1/4

€ 10.70 10.40 10.40 10.40 10.40 10.40 10.40 10.40 10.40 10.40

‘

€ 43.80 45.60

i INHEX sockets

44K

for socket head screws, Chrome Alloy Steel, chrome plated.

‘

Code

B mm

L1 mm

L2 mm

d mm

R g

3 4 5 6 8

28 28 28 28 28

16 16 16 16 16

11.6 11.6 11.6 11.6 11.6

10 10 10 10 15

5 5 5 5 5

‘

01 12 00 03 01 12 00 04 01 12 00 05 01 12 00 06 01 12 00 08 1

€ 5.85 5.85 5.85 5.85 5.85

‘

6.3

Sockets, Socket sets

1/4''

n Screwdriver sockets

44KTX

40CL

for inside TORX screws, Chrome Alloy Steel, chrome plated.

ISO DIN 1174-1 3120

Clip strips

for socket retention, with 9 or 10 retaining clips. Supplied without sockets.

‘

Code

size

C mm

L1 mm

L2 mm

d mm

R g

T8 T9 T10 T15 T20 T25 T27 T30 T40

2.3 2.5 2.7 3.3 3.8 4.4 5.0 5.5 6.6

28 28 28 28 28 28 28 28 28

16 16 16 16 16 16 16 16 16

11.6 11.6 11.6 11.6 11.6 11.6 11.6 11.6 11.6

10 10 10 10 11 11 11 11 12

5 5 5 5 5 5 5 5 5

‘

01 35 00 08 01 35 00 09 01 35 00 10 01 35 00 15 01 35 00 20 01 35 00 25 01 35 00 27 01 35 00 30 01 35 00 40 1

€ 6.80 6.80 6.80 6.80 6.80 6.80 6.90 6.80 7.05

‘

Code

size

L mm

R g

1 2

200 300

36 52

5 5

‘

80 40 00 01 80 40 00 02

€ 5.60 5.60

‘

Drive tools and accessories 1/4'' u, finish: Chrome Alloy Steel, chrome plated.

o Screwdriver sockets

44KTXB

with hollow point, for inside TORX® screws (TORX® TAMPER RESISTANT), Chrome Alloy Steel, chrome plated.

411 ‘

Code

size

C mm

L1 mm

L2 mm

d mm

R g

T8 T9 T10 T15 T20 T25 T27 T30 T40

2.3 2.5 2.7 3.3 3.8 4.4 5.0 5.5 6.6

28 28 28 28 28 28 28 28 28

16 16 16 16 16 16 16 16 16

11.6 11.6 11.6 11.6 11.6 11.6 11.6 11.6 11.6

10 10 10 10 10 11 11 11 12

5 5 5 5 5 5 5 5 5

‘

01 35 10 08 01 35 10 09 01 35 10 10 01 35 10 15 01 35 10 20 01 35 10 25 01 35 10 27 01 35 10 30 01 35 10 40 1

€ 7.00 7.00 7.00 7.00 7.00 7.00 7.15 7.00 7.15

‘

Code

L mm

b mm

a mm

R g

118

19.5

‘

11 23 10 11

€ 33.10

‘

415

Ratchet

reversible, 22 teeth, with 2-component handle, DIN 3122/ISO 3315.

k Screwdriver sockets

44P

Ratchet, fine tooth

reversible, 60 teeth, with 2-component handle, for use in confined spaces, re-engages after movement of 6°, DIN 3122/ISO 3315.

for recessed head screws Phillips-Recess®, tips to DIN 5260, Chrome Alloy Steel, chrome plated.

‘

Code

L mm

b mm

a mm

R g

117

12.5

‘

11 11 10 10

€ 44.80

‘

415QR ‘

Code

PH size

L1 mm

L2 mm

d mm

R g

1 2 3 4

28 28 28 28

16 16 16 16

11.6 11.6 11.6 11.6

10 11 12 14

5 5 5 5

‘

01 29 00 01 01 29 00 02 01 29 00 03 01 29 00 04

€ 5.85 5.85 5.85 5.85

QuickRelease ratchet

Ü ü

reversible, 22 teeth, with QuickRelease safety lock and 2-component handle, DIN 3122/ISO 3315. ‘

‘

l Screwdriver sockets

44PZ

Code 11 11 00 20

for POZIDRIV/SUPADRIV® screws, Chrome Alloy Steel, chrome plated.

‘

Code

PZ size

L1 mm

L2 mm

d mm

R g

1 2

28 28

16 16

11.6 11.6

10 11

5 5

‘

01 30 00 01 01 30 00 02 ‘

L mm

b mm

a mm

R g

117

12.5

‘

€ 6.35 6.35

€ 48.00

6.3

1/4''

ISO DIN 1174-1 3120

415SK*

Ratchet

416

reversible, slim handle, 22 teeth, DIN 3122/ISO 3315. ‘

Code

L mm

b mm

a mm

R g

117

12.5

‘

11 12 00 10

€

Flexible joint ratchet

reversible, 60 teeth, handle may be raised or lowered by approx. 90°. Lockable in following positions: straight, 30° up, 60° up, 30° down. Unlocked by depressing button in handle, registered design.

45.00

‘

* to be discontinued ‘

Code

L mm

b mm

a mm

R g

170

19.5

237

‘

415SG-QR

11 26 00 01

QuickRelease ratchet

4110

reversible, 22 teeth, with QuickRelease safety lock and steel handle, DIN 3122/ISO 3315.

Code

Spare parts set for ratchets No 411, 416

Content: 1 pinion; 1 pawl; 1 switching disk; 1 spring; 3 screws

‘

b mm

a mm

R g

‘

€

Code

R g

‘

11 11 00 30

117

68.50

‘

Ü ü

L mm

€

12.5

50.00

‘

19 20 00 01

€ 24.50

‘

for ratchets from 4/96

415QRL

‘

QuickRelease ratchet

Ü ü

4150

long, reversible, 22 teeth, with QuickRelease safety lock and 2-component handle.

Spare parts set for ratchets No 415, 415SK, 415SG

Content: 1 pinion; 1 pawl; 1 lever with pin; 1 ball; 2 compression springs; 2 screws M 1.7 x 8; 1 cover plate

‘

Code

L mm

b mm

a mm

R g

153

12.5

‘

11 11 01 53

€ 59.50

‘

Code

R g

‘

19 01 00 00

€ 24.90

‘

415B

Bit ratchet 4150QR

reversible, 22 teeth, with 2-component handle and inside hexagon, 1/4'', DIN 3126/ISO 1173 D 6.3 for Bits Screwdriver sockets 1/4''. Internal hex drive with a collar-thrust spring (registered design). Bits are easy to insert, lock securely in position and can be removed just as easily; even hex bits with a wide groove (Type E, DIN 3126/ISO 1173).

Spare parts set for ratchets No 415QR, 415SG-QR

Ü ü

Content: 1 pinion; 1 pawl; 1 lever with pin; 1 ball; 2 compression springs; 2 screws M 1.7 x 8; 1 cover plate ‘

R g

L mm

R g

150

‘

Code

L mm

b mm

a mm

R g

117

‘

Code €

‘

19 01 10 20

€ 27.70

‘

11 13 10 11

54.50

‘

400 415SGB

Bit ratchet

DIN 3122/ISO 3315.

reversible, 22 teeth, with steel handle and inside hexagon, 1/4'', DIN 3126/ISO 1173 D 6.3 for Bits Screwdriver sockets 1/4''. Internal hex drive with a collar-thrust spring (registered design). Bits are easy to insert, lock securely in position and can be removed just as easily; even hex bits with a wide groove (Type E, DIN 3126/ISO 1173).

‘

Code ‘

11 05 00 10

400QR

L mm

b mm

a mm

R g

117

‘

11 13 00 11 ‘

€ 8.85

‘

Code

Drive handle

€ 56.00

QuickRelease drive handle

Ü ü

DIN 3122/ISO 3315, with QuickRelease safety lock. ‘

Code

L mm

R g

150

‘

11 05 10 10

€ 10.30

‘

6.3

Sockets, Socket sets 400 Drall

1/4''

Drive handle

405

1/4''

ISO DIN 1174-1 3120

Extensions

DIN 3123/ISO 3316.

with square drive in end of handle, DIN 3122/ISO 3315. ‘

Code

L mm

R g

150

110

‘

11 05 00 11

€ 9.80

‘

size

L mm

d mm

R g

2 4 6 10 14

54 100 150 254 356

11.6 11.6 11.6 11.6 11.6

29 46 65 115 155

5 5 5 1 1

‘

Code ‘

401

Drive handle

11 01 00 01 11 01 00 06 11 01 00 02 11 01 00 10 11 01 00 14

flexible shaft (right hand rotation only), maximum torque 5 N m.

‘

Code

L mm

R g

240

130

‘

11 05 10 02

€ 6.15 6.35 6.80 9.35 11.10

‘

€

405W

17.90

Extensions with wobble-drive

‘

swivel angle 8° each side, max. torque 40 N m.

403

Flexible handle

DIN 3122/ISO 3315, with 2-component handle. ‘

Code

L mm

R g

154.5

‘

11 06 10 10

€ 25.90

‘

Code

size

L mm

d mm

R g

2 4 6 10 14

54 100 150 254 356

11.6 11.6 11.6 11.6 11.6

28 45 55 110 155

1 1 1 1 1

‘

404

11 01 00 11 11 01 00 16 11 01 00 12 11 01 00 20 11 01 00 24

Sliding T-handle

DIN 3122/ISO 3315.

€ 7.15 8.20 8.50 11.10 12.70

‘ ‘

Code

L mm

R g

116

‘

11 07 00 00

€ 8.45

‘

405QR

QuickRelease extensions

Ü ü

DIN 3123/ISO 3316.

404QR

QuickRelease sliding T-handle

Ü ü

with QuickRelease safety locks.

‘

Code

L mm

R g

116

‘

11 07 10 00

€ 9.70

‘

size

L mm

d mm

R g

2 4 6 13 14

54 102 150 330 356

11.6 11.6 11.6 11.6 11.6

28 49 65 140 150

1 1 1 1 1

‘

Code ‘

413

Speeder brace

11 01 10 01 11 01 10 06 11 01 10 02 11 01 10 13 11 01 10 05

with steel handle, for greater axial power transmission, detachable palm head, working radius 70 mm.

‘

406

‘

Code

L mm

R g

440

352

‘

11 10 00 01

€ 7.15 7.30 7.85 12.60 12.80

€ 52.50

Extension, flexible

(right hand rotation only) maximum torque 5 N m.

‘

Code

L mm

d mm

R g

152

11.6

‘

11 04 00 00 ‘

€ 15.70

6.3

1/4''

ISO DIN 1174-1 3120

407

Universal joint

410

Adaptor

DIN 3123/ISO 3316.

1/4''

socket x 1/2'' plug (6.3 x 12.5), HPQ high performance steel.

‘

Code

L mm

d mm

R g

12.8

‘

11 02 00 00

‘

€ 19.80

‘

Code

L mm

d mm

R g

16.5

‘

11 03 00 03

€ 10.90

‘

407QR

QuickRelease universal joint

412

Ü ü

with QuickRelease safety lock.

c 1/4'' inside hexagon, DIN 3126/ISO 1173 D 6.3. Internal hex drive with a collar-thrust spring (registered design). Bits are easy to insert, lock securely in position and can be removed just as easily; even hex bits with a wide groove (Type E, DIN 3126/ISO 1173). HPQ high performance steel.

‘

L mm

Code

Bit holder

d mm

R g

‘

€

Code

L mm

d mm

R g

11.6

‘

11 02 10 00

22.70

‘

11 18 00 10

€ 14.60

‘

409

Adaptor

412-1

1/4''

socket x 3/8'' plug (6.3 x 10), DIN 3123/ISO 3316, HPQ high performance steel.

‘

Code

L mm

d mm

R g

12.8

‘

11 03 00 02

Bit holder

€ 7.20

‘

409M/432M Set adaptors, 3 pieces /514M/3

c 1/4'' inside hexagon, DIN 3126/ISO 1173 D 6.3 Outer w 10 mm for use in tools with 10 mm internal hex drive or internal double hexagon (e.g. ''FLEXI'' double-ended flexi-joint spanners, T-handle universal joint spanners, box spanners, ratchet ring spanners etc.). Internal hex drive with a collar-thrust spring (registered design). Bits are easy to insert, lock securely in position and can be removed just as easily; even hex bits with a wide groove (Type E, DIN 3126/ISO 1173). HPQ high performance steel. ‘

outside E

L mm

d mm

R g

11 18 00 20 10 mm

11.6

Code

1/4''

socket x 3/8'' plug, 3/8'' socket x 1/2'' plug, 1/2'' socket x 3/4'' plug.

‘

€ 12.00

‘

417/1

Locking adaptor

with hexagon key wrench No 10760aCV 3/32''. ‘

Code

R g

120

‘

96 12 10 02

‘

€ 53.80

‘

Code

L mm

d mm

R g

‘

96 11 27 01

€ 28.25

‘

409M

Adaptor

1/4''

socket x 3/8'' plug (6.3 x 10 mm).

‘

Code

L mm

O mm

R g

‘

11 03 00 10

€ 14.40

‘

6.3

Sockets, Socket sets 4008

1/4''

Ratcheting BIT holder

ISO DIN 1174-1 3120

Tools for Hi-Lok bolts

Positions selectable are clockwise/anticlockwise/fixed with fixed blade. Inner hex. with magnet, for 1/4'' screwdriver bits with outside hexagon 1/4'' DIN 3126/ISO 1173 C 6.3. The square drive extension No 3115/1 can be used to adapt 1/4'' socket inserts (outer hex. to 1/4'' outer square). The ratcheting bit holder is fitted with a quick-twist knurled socket to allow the user to tighten or untighten loosely by hand. Socket mountings are toothed, heavy-duty and angled at 30°. Ergonomically shaped handle with 1/4'' inner square drive, for use with cross-handle, extension bar etc.

40aD/8/1H

Socket set

for Hi-Lok bolts. Content: 5 Sockets with bi-hexagon No 40aD: sizes 7/32; 1/4; 5/16; 11/32; 3/8'' 3 Offset Screwdrivers No 10759a: 1/16; 5/64; 3/32'' 1 Ratchet No 415SGH

‘

Code

‘

Code ‘

18 12 00 00

inside b D 6.3

L1 mm

L2 mm

d mm

R g

1/4

206.5

185

€

96 01 53 03

36.40

inside b DIN 3126/ISO 1173

Ratcheting BIT holder set

29 pieces Content: 1 Ratcheting bit holder No 4008 3 Bits k 1221; 1222; 1223 3 Bits l PZ 1221; PZ 1222; PZ 1223 6 Bits o 1440 T10; 1441 T15; 1442 T20; 1443 T25; 1445 T30; 1446 T40 3 Bits i 1301; 1302; 1303 3 Bits r 1163 0.6 x 4.5; 1165 0.8 x 5.5; 1166/1 1.2 x 6.5 mm 1 Square drive extension No 3115/1 with 1/4'' outer hex. and outer square drives for attaching 1/4'' u sockets 9 Sockets No 40, 1/4'' u sizes 4; 5; 5.5; 6; 7; 8; 10; 11; 13 mm R g

1025

‘

96 18 12 02

112.65

415SGH

Ratchet

‘

Code

L mm

b mm

a mm

R g

117

12.5

‘

11 11 00 02

€ 62.50

‘

414H

Hi-Lok extensions

with lock-on facility as on ratchet No 415SGH, patent. ‘

Code

size

L mm

d mm

R g

2 4 6

54 102 152

13 13 13

34 49 66

1 1 1

‘

Code

425

€

reversible, 22 teeth, patent, axially drilled pinion, locking facility for sockets. For use on Hi-Lok bolts in the aerospace industry.

‘

4008/27/1

‘

R g

‘

€

11 24 00 11 11 24 00 12 11 24 00 13

€ 35.60 36.00 37.40

‘

143.70

10759

‘

Offset screwdrivers

with hexagon end for Ratchet No 415SGH, patent. Round shaft on Screwdriver enables locking of ball retainer.

‘

Code

size

B mm

L mm

R g

1 2

2 2

50 100

5 8

5 5

‘

43 06 20 02 43 06 40 02

€ 3.80 4.10

‘

10759a

Offset screwdrivers

‘

Code

size

B ''

L mm

R g

1/16

50 100 50 100 50 100

5 8 5 8 5 8

5 5 5 5 5 5

‘

43 56 00 04 43 56 40 04 43 56 00 05 43 56 40 05 43 56 00 06 43 56 40 06 1

‘

1 2 1 2 1 2

1/16 5/64 5/64 3/32 3/32

€ 3.75 3.75 3.75 3.75 3.75 3.75

6.3

1/4''

ISO DIN 1174-1 3120

40/9/4

Socket set 1/4'' u

40/13/6QR

Ü ü

in sturdy sheet steel case, 13 pieces Content: 9 sockets with hexagon No 40: sizes 4; 5; 5.5; 6; 7; 8; 10; 11; 13 mm 1 ratchet No 415 2 extensions No 405/2 (54 mm), No 405/6 (150 mm) 1 universal joint No 407 ‘

Code

R g

€

820

131.90

‘

96 01 01 19 ‘

40D/9/4

Socket set

1/4''

96 01 01 80

40/44/17/5

R g

€

852

132.40

‘

Socket set 1/4'' u

in sturdy sheet steel case, 22 pieces Content: 13 sockets with hexagon No 40: sizes 3.5; 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13 mm 4 INHEX sockets No 44: sizes 3; 4; 5; 6 mm 1 ratchet No 415 1 extension No 405/6 (150 mm) 1 universal joint No 407 1 drive handle No 400 1 T-handle No 404 R g

‘

96 01 01 13

1071

€ 196.05

‘

40/44/17/ 5QR

Socket set 1/4'' u

Ü ü

R g

‘

175.95

Socket set 1/4'' u

Code

‘

96 01 01 24

€

765

‘

in sturdy sheet steel case, 19 pieces Content: 13 sockets with hexagon No 40: sizes 3.5; 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13 mm 1 ratchet No 415 2 extensions No 405/2 (54 mm), No 405/6 (150 mm) 1 universal joint No 407 1 drive handle No 400 1 T-handle No 404

Code

R g

‘

96 01 03 04

‘

Code

in sturdy ABS plastic case, 19 pieces Content: 13 sockets with hexagon No 40: sizes 3.5; 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13 mm 1 ratchet No 415QR 2 extensions No 405QR/2 (54 mm), No 405QR/6 (150 mm) 1 universal joint No 407QR 1 drive handle No 400QR 1 T-handle No 404QR

Code

in sturdy sheet steel case, 13 pieces Content: 9 sockets with bi-hexagon No 40D: sizes 4; 5; 5.5; 6; 7; 8; 10; 11; 13 mm 1 ratchet No 415 2 extensions No 405/2 (54 mm), No 405/6 (150 mm) 1 universal joint No 407

40/13/6

Socket set 1/4'' u

1027

€ 166.20

in sturdy ABS plastic case, 22 pieces Content: 13 sockets with hexagon No 40: sizes 3.5; 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13 mm 4 INHEX sockets No 44: sizes 3; 4; 5; 6 mm 1 ratchet 415QR 1 extension No 405/6QR (150 mm) 1 universal joint No 407QR 1 drive handle 400QR 1 T-handle No 404QR ‘

Code

R g

€

805

204.80

‘

96 01 01 81 ‘

6.3

Sockets, Socket sets 40/23/7

1/4''

Socket set 1/4'' u

40D/23/6

Socket set 1/4'' u

in sturdy sheet steel case, 30 pieces Content: 12 sockets with hexagon No 40: sizes 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13 mm 4 INHEX sockets No 44: sizes 3; 4; 5; 6 mm 3 Bits k 1221: size 1; 1222: size 2; 1223: size 3 4 bits r 1162: 0.6 x 3.5 mm, 1164: 0.8 x 4 mm; 1166: 1 x 5.5 mm; 1168: 1.6 x 8 mm 1 ratchet No 415 2 extensions No 405/2 (54 mm), No 405/6 (150 mm) 1 universal joint No 407 1 drive handle No 400 1 T-handle No 404 1 bit-holder No 412

in sturdy sheet steel case, 29 pieces Content: 11 sockets with bi-hexagon No 40D: sizes 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm 3 screwdriver sockets r No 41K: sizes 0.6 x 3.5; 1.0 x 5.5; 1.2 x 8 mm 5 INHEX sockets No 44K: sizes 3; 4; 5; 6; 8 mm 4 screwdriver sockets k No 44P: sizes 1; 2; 3; 4 1 ratchet No 415 2 extensions No 405/2 (54 mm), No 405/6 (150 mm) 1 universal joint No 407 1 drive handle No 400 1 T-handle No 404

‘

R g

Code ‘

96 01 01 34

1355

€ 229.75

‘

40D/23/7

R g

Code ‘

96 01 03 06

1120

40/24/6

Socket set 1/4'' u

in sturdy sheet steel case, 30 pieces Content: 12 sockets with bi-hexagon No 40D: sizes 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13 mm 4 INHEX sockets No 44: sizes 3; 4; 5; 6 mm 3 bits k No 1221: size 1; No 1222: size 2; No 1223: size 3 4 Bits r 1162: 0.6 x 3.5 mm, 1164: 0.8 x 4 mm; 1166: 1 x 5.5 mm 1168: 1.6 x 8 mm 1 ratchet No 415 2 extensions No 405/2 (54 mm), No 405/6 (150 mm) 1 universal joint No 407 1 drive handle No 400 1 T-handle No 404 1 bit-holder No 412

in sturdy ABS plastic case, 30 pieces Content: 12 sockets with hexagon No 40: sizes 4; 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm 3 screwdriver sockets r No 41K: 0.6 x 3.5; 1.0 x 5.5; 1.2 x 8 mm 5 INHEX sockets No 44K: sizes 3; 4; 5; 6; 8 mm 2 screwdriver sockets k No 44P: sizes 1; 2 2 screwdriver sockets l No 44PZ: sizes 1; 2 1 ratchet No 415 2 extensions No 405/2 (54 mm), No 405/6 (150 mm) 1 universal joint No 407 1 drive handle No 400 1 T-handle No 404

‘

Code ‘

96 01 03 05

1380

€ 230.55

€ 230.35

‘

Socket set 1/4'' u

R g

ISO DIN 1174-1 3120

Code

R g

€

895

234.15

‘

96 01 01 38 ‘

‘

40/23/6N

Socket set 1/4'' u

40/24/6QR

Socket set 1/4'' u

Ü ü

in sturdy sheet steel case, 29 pieces Content: 11 sockets with hexagon No 40: sizes 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm 3 screwdriver sockets r No 41K: sizes 0.6 x 3.5; 1.0 x 55; 1.2 x 8 mm, 5 INHEX sockets No 44K: sizes 3; 4; 5; 6; 8 mm 4 screwdriver sockets k No 44P: sizes 1; 2; 3; 4 1 ratchet No 415 2 extensions No 405/2 (54 mm), No 405/6 (150 mm) 1 universal joint No 407 1 drive handle No 400 1 T-handle No 404

in sturdy ABS plastic case, 30 pieces Content: 12 sockets with hexagon No 40: sizes 4; 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm 3 screwdriver sockets r No 41K: 0.6 x 3.5; 1.0 x 5.5; 1.2 x 8 mm 5 INHEX sockets No 44K: sizes 3; 4; 5; 6; 8 mm 2 screwdriver sockets k No 44P: sizes 1; 2 2 screwdriver sockets l No 44PZ: sizes 1; 2 1 ratchet No 415QR 2 extensions No 405QR/2 (54 mm), No 405QR/6 (150 mm) 1 universal joint No 407QR 1 drive handle No 400QR 1 T-handle No 404QR

‘

Code

R g

‘

96 01 01 36 ‘

1167

‘

€ 229.60

Code 96 01 01 82 ‘

R g

€

915

245.00

‘

6.3

1/4''

ISO DIN 1174-1 3120

40ma/25/8

Socket set 1/4'' u

40/52/27/11 Socket set 1/4''; 1/2'' u

in sturdy sheet steel case, 33 pieces Content: 25 sockets with hexagon No 40: sizes 3.2; 3.5; 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm No 40a: sizes 3/16; 7/32; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16'' 1 ratchet No 415 2 extensions No 405/2 (54 mm), No 405/6 (150 mm) 1 extension, flexible No 406 (152 mm) 1 universal joint No 407 1 drive handle No 400 1 flexible handle No 403 1 T-handle No 404

in sturdy sheet steel case, 38 pieces Content: 9 sockets with hexagon No 40: sizes 4; 5; 5.5; 6; 7; 8; 9; 10; 11 mm 10 sockets with hexagon No 52: sizes 13; 16; 17; 18; 19; 21; 22; 24; 27; 30 mm 3 INHEX sockets No 44: sizes 3; 4; 5 mm 5 INHEX sockets No 54: sizes 6; 8; 10; 12; 14 mm 2 ratchets No 415, No 512 4 extensions No 405/2 (54 mm), No 509/5 (130 mm), No 405/6 (150 mm), No 509/10 (255 mm) 2 universal joints No 407, No 510 1 drive handle No 400 2 T-handles No 404, No 506

‘

Code

R g

‘

€

‘

96 01 01 62

2050

274.40

‘

Code

R g

‘

96 01 01 60

5275

€ 439.20

‘

40/45/36/12 Socket set 1/4''; 3/8''

40TX/ Socket set TORX® 1/4'' u 44KTX/15/6

in sturdy sheet steel case, 48 pieces Content: 8 sockets with hexagon No 40: sizes 4; 4.5; 5; 5.5; 6; 7; 8; 9 mm 12 sockets with bi-hexagon No 45: sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22 mm 1 socket with bi-hexagon, long, with rubber insert No 4600: size 16 mm - 5/8'' 3 bits k 1221: size 1; 1222: size 2; 1223: size 3 1 bit l PZ1222: size 2 6 bits r 1160: 0.5 x 3 mm; 1162: 0.6 x 3.5 mm; 1164: 0.8 x 4 mm; 1166: 1 x 5.5 mm; 1166/1: 1.2 x 6.5 mm; 1168: 1.6 x 8 mm 5 bits i 1300: 3 mm; 1301: 4 mm; 1302: 5 mm; 1303: 6 mm; 1304: 8 mm 2 ratchets No 415, No 435 3 extensions No 427/3 (76 mm), No 405/6 (150 mm), No 427/10 (240 mm) 2 universal joints No 407, No 428 1 drive handle No 400 1 T-handle No 425 2 bit-holder No 412, No 442 1 adaptor No 431

in sturdy sheet steel case, 21 pieces Content: 6 sockets for external TORX® screws No 40TX: sizes E4; E5; E6; E7; E8; E10 9 screwdriver sockets for internal TORX® screws No 44KTX: sizes T8; T9; T10; T15; T20; T25; T27; T30; T40 1 ratchet No 415 2 extensions No 405/2 (54 mm), No 405/6 (150 mm) 1 universal joint No 407 1 drive handle No 400 1 T-handle No 404 ‘

Code 96 01 27 01

R g

‘

96 01 10 47 ‘

3005

€

999

208.65

‘

88TX

‘

Code

R g

‘

€ 411.65

Socket set TORX® 1/4'' u

in sturdy sheet steel case, 36 pieces Content: 10 sockets with hexagon No 40: sizes 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13 mm 6 sockets for external TORX® screws No 40TX: sizes E4; E5; E6; E7; E8; E10 5 INHEX sockets No 44K: sizes 3; 4; 5; 6; 8 mm 9 screwdriver sockets for internal TORX® screws No 44KTX: sizes T8; T9; T10; T15; T20; T25; T27; T30; T40 1 ratchet No 415 2 extensions No 405/2 (54 mm), No 405/6 (150 mm) 1 universal joint No 407 1 drive handle No 400 1 T-handle No 404 ‘

Code

R g

‘

98 81 88 01

1455

€ 282.00

‘

6.3

Sockets, Socket sets 89TX

1/4''

Socket set TORX® 1/4; 3/8; 1/2'' u

40a/9/4

in sturdy sheet steel case, 35 pieces Content: 3 sockets for external TORX® screws No 40TX: sizes E4; E5; E6 2 screwdriver sockets for internal TORX® screws No 44KTX: sizes T8; T9 4 sockets for external TORX® screws No 45TX: sizes E7; E8; E10; E12 5 screwdriver sockets for internal TORX® screws No 49TX: sizes T10; T15; T20; T25; T27 6 sockets for external TORX® screws No 50TX: sizes E11; E14; E16; E18; E20; E24 6 screwdriver sockets for internal TORX® screws No 54TX: sizes T30; T40; T45; T50; T55; T60 7 bits o 1440: T10; 1441: T15; 1442: T20; 1443: T25; 1444: T27; 1445: T30; 1446: T40 1 bit-holder No 442 1 TORX® controller: sizes E6; E7; E8; E10; E12; E14; E16; T10; T15; T20; T25; T27; T30; T40; T45; T47; T50; T55; T60

R g

‘

98 81 09 08

2765

‘

Code

R g

€

920

135.05

‘

96 01 41 07 ‘

40aD/9/4

€ 339.00

‘

86TX

Socket set 1/4'' u

in sturdy sheet steel case, 13 pieces Content: 9 sockets with hexagon No 40a: sizes 3/16; 7/32; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2'' 1 ratchet No 415 2 extensions No 405/2 (54 mm), No 405/6 (150 mm) 1 universal joint No 407

‘

Code

ISO DIN 1174-1 3120

Socket set TORX® 1/4; 1/2'' u

in sturdy sheet steel case, 63 pieces Content: 9 sockets with hexagon No 40: sizes 4; 5; 5.5; 6; 7; 8; 9; 10; 11 mm 10 sockets with hexagon No 52: sizes 13; 16; 17; 18; 19; 21; 22; 24; 27; 30 mm 5 sockets for external TORX® screws No 40TX: sizes E4; E5; E6; E7; E8 7 sockets for external TORX® screws No 50TX: sizes E10; E12; E14; E16; E18; E20; E24 3 INHEX sockets No 44: sizes 3; 4; 5 mm 5 INHEX sockets No 54: sizes 6; 8; 10; 12; 14 mm 6 screwdriver sockets for internal TORX® screws No 44KTX: sizes T8; T9; T10; T15; T20; T25 7 screwdriver sockets for internal TORX® screws No 54TX: sizes T27; T30; T40; T45; T50; T55; T60 2 ratchets No 415, No 512 4 extensions No 405/2 (54 mm), No 509/5 (130 mm), No 405/6 (150 mm), No 509/10 (255 mm) 2 universal joints No 407, No 510 1 drive handle No 400 2 T-handles No 404, No 506

Socket set 1/4'' u

in sturdy sheet steel case, 13 pieces Content: 9 sockets with bi-hexagon No 40aD: sizes 3/16; 7/32; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2'' 1 ratchet No 415 2 extensions No 405/2 (54 mm), No 405/6 (150 mm) 1 universal joint No 407 ‘

Code

R g

€

830

134.75

‘

96 01 53 02 ‘

40ma/25/8

Socket set 1/4'' u

‘

Code

R g

‘

€

Code

R g

‘

96 01 27 02 ‘

7045

679.20

96 01 01 62 ‘

100

2050

€ 274.40

6.3

1/4''

ISO DIN 1174-1 3120

40aD/12/ 7QR

Socket set 1/4'' u

ES 1/4'' + 10760CV

Ü ü

in sturdy sheet steel case, 19 pieces Content: 1 socket with hexagon No 40a: size 1/8'' 11 sockets with bi-hexagon No 40aD: sizes 5/32; 3/16; 7/32; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16'' 1 ratchet No 415SG-QR 3 extensions No 405/2QR (2x) (54 mm), No 405/6QR (150 mm) 1 universal joint No 407QR 1 drive handle No 400QR 1 bit-holder No 412

175 x 350 x 41 mm, 27 pieces ‘

R g

Code 96 83 81 10

1035 No 40

1/4'' a sizes 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm

No 400

1/4''

D 150 mm

No 404

1/4''

D 116 mm

No 405/2

1/4''

D a 54 mm

No 405/6

1/4''

D a 150 mm

No 407

1/4''

D a 38 mm

No 412

1/4''

No 415

1/4''

No 10760CV

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10; 12 mm

‘

Code ‘

96 01 42 08

1020

‘

€

‘

196.50

‘

40aD/30/ 7QR

Socket set

1/4''

‘

Ü ü

in sturdy sheet steel case, 37 pieces Content: 1 socket with hexagon No 40a: size 1/8'' 11 sockets with bi-hexagon No 40aD: sizes 5/32; 3/16; 7/32; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16'' 11 sockets with bi-hexagon, long, No 40aDL: sizes 5/32; 3/16; 7/32; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16'' 7 UNIFLEX sockets with bi-hexagon No 402a: sizes 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2'' 1 ratchet No 415SG-QR 3 extensions No 405/2QR (2x) (54 mm), No 405/6QR (150 mm) 1 universal joint No 407QR 1 drive handle No 400QR 1 bit-holder No 412 R g

‘

96 01 42 05

2210

‘

83 81 20 28

Empty tray

107

8.15

‘

TCS 1/4'' + 10760CV

x ö 175 x 350 x 43 mm, 27 pieces ‘

Code

R g

€

987

184.70

‘

96 83 81 76 ‘

No 40

1/4'' a sizes 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm

No 400

1/4''

D 150 mm

No 404

1/4''

D 116 mm

No 405/2

1/4''

D a 54 mm

No 405/6

1/4''

D a 150 mm

No 407

1/4''

D a 38 mm

No 412

1/4''

No 415

1/4''

No 10760CV

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10; 12 mm

‘

Code

174.25

‘

R g

€

‘

€ 562.00

‘

‘ ‘

‘

101

6.3

Sockets, Socket sets

1/4''

TCS 40/41/44/8

TCS 40/35/9

x ö

175 x 350 x 40 mm, 33 pieces

175 x 350 x 40 mm, 44 pieces

‘

R g

Code

€

‘

96 83 02 17

715

258.00

‘

a sizes 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm

96 83 06 01

No 41K

1/4''

1045

416.85

No 40

a sizes 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm

No 40L

1/4'' a sizes 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13 mm

No 41K

1/4''

No 44K

1/4''

a, E 3; 4; 5; 6; 8 mm

No 44P

1/4''

a, k sizes 1; 2; 3; 4 mm

No 400

1/4''

D 150 mm

No 404

1/4''

D 116 mm

No 405/2 No 405/4

1/4'' 1/4''

D a 54 mm D a 100 mm

No 405/6

1/4''

D a 150 mm

No 407

1/4''

D a 38 mm

No 412

1/4''

No 415

1/4''

No 409

3/8''

D 1/4'' a

1/4''

‘

No 44K

1/4''

a, E 3; 4; 5; 6; 8 mm

No 44P

1/4''

a, k sizes 1; 2; 3; 4

No PZ 1221 No PZ 1222

1/4''

‘

E, l size 1 1/4'' E, l size 2

No 400

1/4''

D 150 mm

No 404

1/4''

D 116 mm

No 405/2

1/4''

D a 54 mm

No 405/6

1/4''

D a 150 mm

No 407

1/4''

D a 38 mm

No 409

3/8''

D 1/4'' a

‘

No 412

1/4''

‘

No 415

1/4''

ba D

a, r 0.6 x 3.5; 1.0 x 5.5; 1.2 x 8 mm

‘

102

€

‘

a, r 0.6 x 3.5; 1.0 x 5.5; 1.2 x 8 mm

‘

R g

Code ‘

‘

No 40 ‘

ISO DIN 1174-1 3120

3/8''

ISO DIN 1174-1 3120

f Sockets

e Sockets

456

P Q

DIN 3124/ISO 2725-1, ASME B 107.5M, E DIN EN 3709 (test loads), HPQ high performance steel, chrome plated.

metric sizes: DIN 3124/ISO 2725-1, ASME B 107.5M, E DIN EN 3709, American sizes: ASME B 107.1, Fed. Spec. GGG-W-641, SAE AS 954-E (test loads), HPQ high performance steel, chrome plated.

‘

Code

A mm

d1 d2 d3 L t1 t2 R mm mm mm mm mm mm g

7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 24

10.5 11.7 13 14.3 15.6 16.9 18 19.4 20.6 21.7 23 24.2 25.2 26.2 27.7 28.7 31.5

10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5

‘

02 01 00 07 02 01 00 08 02 01 00 09 02 01 00 10 02 01 00 11 02 01 00 12 02 01 00 13 02 01 00 14 02 01 00 15 02 01 00 16 02 01 00 17 02 01 00 18 02 01 00 19 02 01 00 20 02 01 00 21 02 01 00 22 02 01 00 24 1

16.5 16.5 16.5 16.5 16.5 17.5 17.5 17.5 19 19 19 19 19 20 21 21 24

6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 21

24 25 25 27 27 28 30 30 31 31 31 32 32 34 34 35 35

6 7 7 8.5 8.5 9.5 11.5 11.5 12.5 13.5 12.5 13.5 13.5 15.5 15.5 17 18

12.5 13.5 13.5 15.5 13.7 14.4 16.1 15.8 19.2 18.9 18.6 19.3 19 20.7 20.5 21.2 21.2

19 19 19 20 21 24 30 28 30 33 44 39 39 51 53 61 92

Code € 6.15 5.85 5.90 5.90 5.90 5.90 5.85 6.15 6.40 6.40 6.15 6.40 6.25 8.10 7.45 7.30 10.20

02 11 00 07 02 11 00 08 02 11 00 09 02 11 00 10 02 11 00 11 02 11 00 12 02 11 00 13 02 11 00 14 02 11 00 15 02 11 00 16 02 11 00 17 02 11 00 18 02 11 00 19 02 11 00 20 02 11 00 21 02 11 00 22 1

Code

A ''

d1 d2 d3 L t1 t2 R mm mm mm mm mm mm g

9.7 11.7 12.5 13.7 15.7 18 20.2 20.6 21.7 23.4 25.2 27.2 28.7 31.5 33

10 10 10 10 10 10 10 5 5 5 5 5 5 5 5

‘

02 41 00 16 02 41 00 20 02 41 00 22 02 41 00 24 02 41 00 28 02 41 00 32 02 41 00 34 02 41 00 35 02 41 00 36 02 41 00 38 02 41 00 40 02 41 00 42 02 41 00 44 02 41 00 46 02 41 00 48 1

1/4 5/16 11/32 3/8 7/16 1/2 9/16 19/32 5/8 11/16 3/4 13/16 7/8 15/16

16.5 16.5 16.5 16.5 16.5 17.5 19 19 19 19 19 20.5 22 24 25.5

5.2 7 8.1 8.4 10 11.5 13.1 14 15 16.3 18 19.4 21 22.6 24.2

24 25 25 27 28 30 31 31 31 32 32 34 35 35 35

d3 mm

L t1 t2 R mm mm mm g S

7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

10.5 11.7 13 14.3 15.6 16.9 18 19.4 20.6 21.7 23 24.2 25.2 26.2 27.7 28.7

6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

24 25 25 27 27 28 30 30 31 31 31 32 32 34 34 35

16.5 16.5 16.5 16.5 16.5 17.5 17.5 17.5 19 19 19 19 19.6 20.5 21.8 21

6 7 7 8.5 8.5 9.5 11.5 11.5 12.5 13.5 12.5 13.5 13.5 15.5 15.5 17

12.5 13.5 13.5 15.5 13.7 14.4 16.1 15.8 19.2 18.9 18.6 19.3 19 20.7 20.5 21.2

19 19 20 20 21 24 25 29 30 34 45 42 43 53 59 59

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

€ 6.20 5.85 5.80 5.85 5.90 5.85 5.75 6.10 6.70 6.80 6.45 6.80 6.45 8.15 7.55 7.55

f Sockets

460a

P Q

f Sockets

45a

d1 d2 mm mm

‘

A mm

‘

6 7 7 8.5 9.5 11.5 12.7 13 13.5 14.7 15.9 16.5 18 18.5 18.5

12.5 13.5 13.5 15.5 15.1 16.5 16.8 19.2 18.9 19.5 19 20.5 21 20.7 20.2

18 19 19 20 20 24 28 36 31 34 41 52 59 95 97

€ 5.95 5.95 5.95 5.95 6.10 6.10 6.45 7.60 6.80 6.80 7.50 8.50 7.65 10.10 10.50

SAE AS 954-E, S.B.A.C. AS 40610/40611, ASME B 107.1, HPQ high performance steel, chrome plated.

‘

Code

A ''

d1 d2 mm mm

d3 mm

‘

02 62 00 16 02 62 00 20 02 62 00 24 02 62 00 28 02 62 00 32 1

1/4 5/16 3/8 7/16 1/2

9.9 11.5 13.7 15.7 17.5

16.5 5.2 16.5 7 16.5 8.5 16.5 10 17.8 11.5

L t1 t2 R mm mm mm g S 32 7 32 8.5 38 9 38 11 44 12

20.5 20.5 26.5 24.5 30

21 22 29 33 44

5 5 5 5 5

€ 12.90 12.90 12.90 12.90 12.90

‘

STAHLWILLE HPQ inserts

STAHLWILLE AS-Drive

STAHLWILLE HPQ* sockets are manufactured from selected tough steel alloys. The result: they are extremely durable. HPQ sockets are free of cadmium and are therefore suitable for use on titanium alloy parts and titanium fasteners as used e.g. in the aerospace industry, where safety is a crucial factor.

STAHLWILLE sockets are equipped with the AS-Drive* profile: this permits high transmission of forces to the lands of nuts and bolts without damaging them. No longer will you have to worry about stripping the corners off nuts and bolts. *Anti-Slip-Drive

*High Performance Quality

103

Sockets, Socket sets

3/8''

f Sockets

e Spark plug socket

3466

P Q

ISO DIN 1174-1 3120

P Q

extra deep, metric sizes: DIN 3124/ISO 2725-1, E DIN EN 3710, E DIN EN 3709, ASME B 107.5M, American sizes: ASME B 107.1, Fed. Spec. GGG-W-641, SAE AS 954-E, HPQ high performance steel, chrome plated.

extra deep, with magnet, HPQ high performance steel, chrome plated.

‘

Code

A mm/''

d1 d2 d3 L t1 t2 R mm mm mm mm mm mm g S

‘

02 14 00 36 16-5/8

21.8 25.5 15

€

72.9 198 5 30.00

‘ ‘

Code

A mm/''

d1 mm

d2 d3 mm mm

L t1 t2 R mm mm mm g S

8 10 11 12 13 14 15 16 17 18 19 20.8-13/16 1) 21 22

11.7 14.3 15.6 16.9 18 19.4 20.6 21.7 23 24.2 25.2 27.2 27.7 28.7

16.5 16.5 16.5 17.5 17.5 17.5 19 19.5 21 22 23 25 25.5 26.5

54 54 54 54 54 60 60 60 65 65 65 65 65 65

‘

02 02 00 08 02 02 00 10 02 02 00 11 02 02 00 12 02 02 00 13 02 02 00 14 02 02 00 15 02 02 00 16 02 02 00 17 02 02 00 18 02 02 00 19 02 02 02 08 02 02 00 21 02 02 00 22 1

7 9 10 11 12 13 14 15 16 17 18 20 21

9 20 20 20 20 25 25 25 30 30 30 18 30 30

42.5 42.5 40.7 40.4 40.1 45.8 48.2 47.9 52.6 52.3 52 51.5 51.2

36 41 51 57 61 75 85 81 97 121 112 151 137 178

10 10 10 10 10 10 10 10 10 10 10 10 5 5

12.30 12.30 13.20 13.20 12.70 13.20 13.50 13.80 14.00 15.30 15.30 15.00 16.80 16.90

f Spark plug socket

4600

€

P Q

extra deep, with rubber insert, HPQ high performance steel, chrome plated.

‘

A d1 d2 mm/'' mm mm

L mm

t1 mm

t2 R mm g S

€

16-5/8

47.8 88 10

14.40

Code ‘

02 12 00 36 ‘

e Spark plug socket

‘

4606

) with rubber insert for spark plugs

‘

Code

A ''

‘

02 42 00 16 02 42 00 20 02 42 00 24 02 42 00 28 02 42 00 32 02 42 00 34 02 42 00 35 02 42 00 36 02 42 00 38 02 42 00 40 02 42 00 42 02 42 00 44 02 42 00 46 02 42 00 48 1

P Q

f Sockets

46a ‘

1/4 5/16 3/8 7/16 1/2 9/16 19/32 5/8 11/16 3/4 13/16 7/8 15/16

d1 d2 d3 L t1 t2 R mm mm mm mm mm mm g S 9.7 11.7 13.7 15.7 18 20.2 20.6 21.7 23.4 25.2 27.2 28.7 31.5 33

16.5 16.5 16.5 16.5 17.5 19 19 19.5 21.5 23 25 26.5 29 31

5.2 7 8.4 10 11.5 13.1 14 15 16.3 18 19.4 21 22.6 24.2

54 54 54 54 54 60 60 60 65 65 65 65 65 65

9 9 20 20 20 25 25 25 30 30 30 30 30 30

42.5 42.5 42.5 40.7 40.2 45.8 48.2 47.9 52.5 52 51.6 51.2 50.7 50.2

33 35 45 53 64 66 84 81 114 137 130 184 195 205

5 5 5 5 5 5 5 5 5 5 5 5 5 5

extra deep, with rubber insert, HPQ high performance steel, chrome plated. € 12.90 12.90 12.50 12.50 12.50 12.90 13.30 12.90 14.80 14.80 14.80 14.80 15.20 15.20

‘

5100

21.7 19.5

‘

A mm/''

Code ‘

02 13 00 18

18-11/16

d1 d2 L t1 t2 R mm mm mm mm mm g S 24.2 22

18 52.8 132 10

€ 14.60

‘

Assembly of spark plugs on motorcycles, mopeds ‘

f UNIFLEX sockets

P Q

SAE AS 954-E (American sizes), HPQ high performance steel, chrome plated.

Rubber insert

for size 20.8 mm (No 46; 51; 51S). ‘

Code

R g

‘

09 01 00 01

€ 1.15

‘

Code

A mm

d1 mm

10 11 12 13 14 15 16 17 18 19

14.3 15.6 16.9 18.3 19.4 20.6 21.8 23 24.2 25.5

d2 d3 mm mm

L mm

t1 t2 R mm mm g S

45.5 47.5 48 48 48.5 48.5 51.5 53.5 54.5 57

7 11 11 12 13 13 14 15 16 16

‘

02 04 00 10 02 04 00 11 02 04 00 12 02 04 00 13 02 04 00 14 02 04 00 15 02 04 00 16 02 04 00 17 02 04 00 18 02 04 00 19 1

‘

104

17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5

9 10 11 12 13 14 15 16 17 18

12 14 14.5 14.5 14.5 14.5 17 18.5 18.5 21

51 55 54 53 55 56 58 63 61 68

1 1 1 1 1 1 1 1 1 1

€ 33.30 35.00 34.20 33.60 34.10 34.10 37.30 35.70 37.30 37.30

3/8''

ISO DIN 1174-1 3120

f UNIFLEX sockets

47a ‘

Code

A ''

d1 mm

d2 d3 mm mm

L mm

t1 t2 R mm mm g S

5/16 3/8 7/16 1/2

11.7 13.7 15.8 18.3 19.7 21.6 23.5 25.5

17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5

45.5 45.5 47.5 47.5 48.5 51.5 53.5 57

7 7 11 11.5 13 14 16 16

‘

02 44 00 20 02 44 00 24 02 44 00 28 02 44 00 32 02 44 00 34 02 44 00 36 02 44 00 38 02 44 00 40 1

9/16 5/8 11/16 3/4

7 8.5 10 11.5 13.1 15 16.3 18

12.5 12 14 14 14.5 17 18.5 21

50 50 50 57 55 59 58 67

1 1 1 1 1 1 1 1

€ 32.30 32.30 32.30 32.30 32.30 35.10 35.80 35.80

MS-33787, MIL-W-8982, HPQ high performance steel, chrome plated.

‘

Spline A d1 d2 d3 L t1 t2 R size '' mm mm mm mm mm mm g

‘

Code

p Sockets

45TX

h Sockets spline-drive

45aSP

‘

02 01 10 12 12 02 01 10 14 14 02 01 10 16 16

3/8 7/16 1/2

13.7 16.5 8.6 26.5 9 15 16 17.3 10.4 28 11 14.5 18 18.3 12.2 28 11.5 14

24 37 28

1 1 1

€ 40.40 40.40 40.40

‘

for external TORX® screws, HPQ high performance steel, chrome plated.

h Socket spline-drive

45aPSP

MS-33787, MIL-W-8982, for disassembling jet engines, series CFM 56, HPQ high performance steel, gunmetal finish.

‘

Code

size

‘

02 27 00 05 02 27 00 06 02 27 00 07 02 27 00 08 02 27 00 10 02 27 00 12 02 27 00 14 1

C d1 d2 d3 L t1 t2 R mm mm mm mm mm mm mm g S

E5 4.7 7 E6 5.7 8 E7 6.2 9 E8 7.5 10.5 E10 9.4 13 E12 11.1 14.9 E14 12.9 16.5

16.5 16.5 16.5 16.5 16.5 16.5 17.3

2.8 3.6 3.8 4.3 5.6 7.2 8

28 5 28 5.5 28 6.5 28 7 28 8 28 9.5 28 10

16.5 16.5 16.5 16.5 16.5 16.5 16.5

23 23 24 22 27 28 34

10 10 10 10 10 10 10

€ 8.30 8.30 8.30 8.30 8.30 8.25 8.55

‘

Spline A d1 d2 d3 L t1 t2 size '' mm mm mm mm mm mm

Code

R g S

‘

22 41 00 28 14

7/16

18.8 18.8 10.4 28

11 14.5

€ 16.90

‘

h Sockets spline-drive

46aSP

p Set: Sockets

45TX/7

extra deep bolt clearance, MS-33787, MIL-W-8982, HPQ high performance steel, chrome plated.

for external TORX® screws. Content: E5; E6; E7; E8; E10; E12; E14

‘

Spline A d1 d2 d3 L t1 t2 R size '' mm mm mm mm mm mm g

Code ‘ ‘

Code

R g

219

‘

96 02 27 02

€

02 02 10 12 12 02 02 10 14 14

60.55

54 9 54 11

42.5 42.5

52 63

S 1 1

€ 49.80 49.80

f Socket

45aP

P Q

‘

p UNIFLEX sockets

47TX

13.7 16.5 8.6 16 17.3 10.4

‘

in carton packing

3/8 7/16

ASME B 107.1, Fed. Spec. GGG-W-641, SAE AS 954-E (test loads), for disassembling jet engines, series CFM 56, HPQ high performance steel, gunmetal finish.

for external TORX® screws, Chrome Alloy Steel, chrome plated.

‘

Code

C mm

d1 mm

d2 mm

L mm

R g

E8 7.5 E10 9.4 E12 11.1 E14 12.9

11.5 13.8 16 17.8

19 19 19 19

43 44 46 48

56 61 66 75

1 1 1 1

size

‘

02 07 00 08 02 07 00 10 02 07 00 12 02 07 00 14

€ 29.10 29.10 29.10 29.10

‘

Code

A d1 d2 d3 L t1 t2 '' mm mm mm mm mm mm

R g

€

5/16

7.35

‘

02 43 00 20

11.9 16.5 8.1

13.5

‘

105

Sockets, Socket sets

3/8''

i INHEX sockets

ISO DIN 1174-1 3120

n Screwdriver sockets

49TX ®

for inside TORX screws, Chrome Alloy Steel, chrome plated.

for socket head screws, DIN 7422, Chrome Alloy Steel, chrome plated.

‘

size

C mm

L1 mm

L2 mm

d mm

R g

T9 T10 T15 T20 T25 T27 T30 T40 T45

2.5 2.7 3.3 3.8 4.4 5 5.5 6.6 7.8

49 49 49 49 49 49 49 49 49

17 17 17 17 17 17 17 17 17

17.8 17.8 17.8 17.8 17.8 17.8 17.8 17.8 17.8

45 45 45 46 46 46 47 48 49

5 5 5 5 5 5 5 5 5

‘

Code

B mm

L1 mm

L2 mm

R g

d mm

‘

02 05 00 03 02 05 00 04 02 05 00 05 02 05 00 06 02 05 00 07 02 05 00 08 02 05 00 10 1

3 4 5 6 7 8 10

52 52 52 52 52 52 52

20 20 20 20 20 20 20

17.8 17.8 17.8 17.8 17.8 17.8 17.8

38 40 44 46 51 55 62

S 5 5 5 5 5 5 5

€ 8.35 7.85 7.85 7.85 7.85 8.85 8.85

‘

Code ‘

02 10 00 09 02 10 00 10 02 10 00 15 02 10 00 20 02 10 00 25 02 10 00 27 02 10 00 30 02 10 00 40 02 10 00 45 1

i INHEX sockets

49a

‘

Code

‘

B ''

L1 mm

L2 mm

d mm

R g

1/8 9/64 5/32 3/16

52 52 52 52 52 52 52 52

20 20 20 20 20 20 20 20

17.8 17.8 17.8 17.8 17.8 17.8 17.8 17.8

40 40 40 44 46 48 55 61

5 5 5 5 5 5 5 5

‘

02 45 00 08 02 45 00 09 02 45 00 10 02 45 00 12 02 45 00 14 02 45 00 16 02 45 00 20 02 45 00 24 1

7/32 1/4 5/16 3/8

€ 9.85 9.65 9.65 9.65 9.65 9.65 9.65 9.65 10.10

€

n Set: Screwdriver sockets

49TX/8

for inside TORX® screws. T9; T10; T15; T20; T25; T27; T30; T40

9.90 10.10 9.90 9.65 9.90 9.90 10.90 11.30

‘

i INHEX sockets

2049

‘

for socket head screws, extra long, DIN 7422, Chrome Alloy Steel, chrome plated.

Code

R g

456

‘

96 02 10 01

€ 80.45

‘

in carton packing

‘

Code

B mm

L1 mm

L2 mm

d mm

4 5 6 8 10

100 100 100 120 120

68 68 68 88 88

17.8 17.8 17.8 17.8 17.8

R g

‘

02 15 10 04 02 15 10 05 02 15 10 06 02 15 12 08 02 15 12 10 1

45 50 57 85 106

5 5 5 5 5

€ 9.75 9.75 9.75 10.10 10.70

m Screwdriver sockets

49X

for tri-square socket head screws (XZN®), DIN 2324, Chrome Alloy Steel, chrome plated.

‘

i INHEX sockets for socket head screws, DIN 7422, special lengths, Chrome Alloy Steel, chrome plated.

‘

Code

‘

Code

B mm

L1 mm

L2 mm

d mm

R g

7 8 9

100 24 57

68 17.8 6.5 19 25 17.8

66 28 62

5 5 5

‘

02 15 10 07 02 15 24 08 02 15 10 09

1049/7 3049/8 1049/9 1)

€ 15.10 9.55 8.95

02 06 00 05 02 06 00 06 02 06 00 08 02 06 00 10

) For brake calliper retainers on BMW and MINI.

‘

L1 mm

L2 mm

d mm

R g

M5 M6 M8 M10

52 52 52 52

20 20 20 20

17.8 17.8 17.8 17.8

45 47 56 63

5 5 5 5

€ 11.00 11.00 11.00 11.80

‘

m Screwdriver sockets

3049X

‘

size

‘

for tri-square socket head screws (XZN®), extra long, DIN 2324, Chrome Alloy Steel, chrome plated. ‘

Code

size

L1 mm

L2 mm

d mm

R g

M8 M10

120 120

88 88

17.8 17.8

80 106

5 5

‘

02 26 12 08 02 26 12 10 ‘

106

€ 11.90 12.90

3/8''

ISO DIN 1174-1 3120

440

CROW-RING spanners

440a

Code

Caution! Modified settings on torque wrench (refer to note on page 196). Chrome Alloy Steel, chrome plated.

01 49 00 24 01 49 00 28 01 49 00 32 01 49 00 34 02 49 00 36 02 49 00 38 02 49 00 40 02 49 00 42 02 49 00 44 02 49 00 46 02 49 00 48 02 49 00 50 03 49 00 52 03 49 00 56 03 49 00 58 03 49 00 60 03 49 00 62 03 49 00 64 03 49 00 65 03 49 00 66 03 49 00 68 03 49 00 69 03 49 00 72 03 49 00 76 03 49 00 77 03 49 00 78 1

‘

A mm

a L b a S W '' mm mm mm mm mm

‘

01 19 00 08 01 19 00 09 01 19 00 10 01 19 00 11 01 19 00 12 01 19 00 13 01 19 00 14 02 19 00 15 02 19 00 16 02 19 00 17 02 19 00 18 02 19 00 19 02 19 00 20 02 19 00 21 02 19 00 22 02 19 00 23 02 19 00 24 02 19 00 25 02 19 00 26 02 19 00 27 02 19 10 27 03 19 00 28 03 19 00 30 03 19 00 32 03 19 00 34 03 19 00 36 03 19 00 38 03 19 00 40 03 19 00 41 03 19 00 42 03 19 00 46 03 19 00 50 1

1/4 8 1/4 9 10 1) 1/4 1/4 11 12 1) 1/4 1/4 13 14 1) 1/4 3/8 15 3/8 16 17 2) 3/8 3/8 18 19 2) 3/8 3/8 20 3/8 21 22 2) 3/8 3/8 23 24 2) 3/8 3/8 25 3/8 26 3/8 27 27DC 3) 3/8 1/2 28 1/2 30 1/2 32 1/2 34 1/2 36 1/2 38 1/2 40 1/2 41 1/2 42 1/2 46 1/2 50

23.8 28.5 28.4 28 30.8 32 31.7 36.5 36.1 39.2 40.8 40.5 42.9 42.8 45.3 47.5 47.3 49.3 49.3 52.8 57.1 56.8 63 62.5 64.2 66.5 68.1 71.8 71.8 71 77.7 83.2

12.7 18.2 18.2 18.2 20.6 22.2 22.2 24.6 24.6 27.3 29 29 31.3 31.3 33.5 35.7 35.7 37.7 37.7 40 42.1 42.1 48 48 50 51.9 53.9 57.9 57.9 57.9 64.2 70.5

8 13.5 13.5 13.5 14 14 14 17.5 17.5 17.5 18.5 18.5 18.5 18.5 19 19.5 19.5 20 20 21.4 15 22.5 22.5 22.5 24 24 24 24.5 24.5 24.5 26 27.5

12.3 14 14 14 15.7 16.4 16.4 19.1 19.1 20.5 21.3 21.3 22.5 22.5 23.6 24.6 24.6 25.7 25.7 28.2 29.3 29.3 32.5 32.5 33.5 34.6 35.6 37.7 37.7 37.7 40.9 44.1

6.3 6.7 7.1 8.6 9 10 11.1 11.9 13 14 14.8 15.8 15.8 16.2 17 17.5 18 19 19 20 20 21 22 24 27 27 28.6 31 31 33.2 34.1 39.7

R g S 11 21 16 17 20 20 20 34 27 40 45 40 54 45 57 71 57 80 63 100 92 120 155 137 148 150 147 160 169 189 215 295

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

€ 36.70 37.50 32.60 36.70 33.50 32.60 32.60 47.10 41.80 41.80 41.80 41.00 43.70 42.60 42.60 48.10 42.60 49.30 43.70 50.00 51.50 51.50 53.50 55.50 55.50 57.00 61.00 69.00 62.00 69.00 70.50 90.00

b mm

a mm

S mm

W mm

R g S

3/8 1) 7/16 1/2 9/16

1/4

18.2 18.2 20.6 22.2 24.6 27.3 29 31.3 33.5 35.7 37.7 40 42.1 48 48 50 51.9 53.9 55.9 57.9 62 64.2 70.5 78.7 80.9 83

13.5 13.5 14 14 17.5 17.5 18.5 18.5 19 19.5 20 21.4 22.5 22.5 22.5 24 24 24 24 24.5 25.5 26 27.5 29.5 30 30.5

14 14 15.7 16.4 19.1 20.5 21.3 22.5 23.6 24.6 25.7 28.2 29.3 32.5 32.5 33.5 34.6 35.6 36.7 37.7 39.8 40.9 44.1 48.2 49.2 50.2

7.1 8.6 10 11.1 11.9 14 14.2 15.8 17.5 18.3 19 20 21 23.8 24.6 27 27 28.6 29.4 31 33.2 34.1 39.7 42.8 43.6 46

14 14 19 23 33 36 44 51 62 63 71 84 110 137 130 138 143 152 172 169 199 229 277 337 309 385

5/8 11/16 3/4 13/16

1/4 1/4 1/4 3/8 3/8 3/8 3/8

7/8 15/16

3/8 3/8 3/8 1/16 3/8

1 1 1 1/8 1/2 1 1/4 1/2 1 5/16 1/2 1 3/8 1/2 1 7/16 1/2 1 1/2 1/2 1 9/16 1/2 1 5/8 1/2 1 3/4 1/2 1 13/16 1/2 1/2 2 2 1/4 1/2 2 5/16 1/2 2 3/8 1/2

28.4 28 30.5 31.7 36.5 39.2 40.9 42.9 45.2 47.2 49.3 52.8 56.8 62.5 62.3 64.2 66.5 68.1 70.1 71.8 75.6 77.7 83.2 91.2 93.3 95.2

€

1 35.00 1 35.00 1 35.00 1 35.00 1 42.90 1 42.90 1 42.90 1 42.90 1 43.60 1 44.70 1 44.70 1 44.70 1 44.70 1 48.70 1 51.50 1 51.50 1 56.00 1 56.00 1 64.00 1 64.00 1 74.50 1 74.50 1 80.50 1 90.50 1 109.00 1 113.00

) For Volvo aero-engines, types ''JAS''

‘

440S MJ

CROW-RING spanners

Supersedes No 440 MJ Caution! Modified settings on torque wrench (refer to note on page 196), EN 4108, for pipe unions with straight cylindrical involute toothing, HPQ high performance steel, chrome plated.

‘

a L '' mm

‘

) For union nuts on fuel injection leads on 4-cylinder Mercedes-Benz diesel engines 2 ) For use on suction or pressure lines within expansion valve of air conditioning unit (Mercedes-Benz) 3 ) Slim-line version for setting of electronic injection on 440-HP-engines Mercedes-Benz series OM 442

A ''

‘

Code

CROW-RING spanners

‘

Code

Threaded G a nut mm ''

L mm

b mm

a mm

S mm

W R mm g S

1/4 1/4 3/8 3/8

31.9 36.5 43.8 45.2 46.2 48.4 49.5 54.4 60.8

22 27 31 33 35 37 39 44 50

8 8 8 8 8 9 9 10 10

17 19.5 24 25 26 27 28 31 36

6.5 8.5 10.5 13 15 17.5 19.7 21.5 23.7

‘

01 21 10 10 01 21 10 14 02 21 10 16 02 21 10 18 02 21 10 20 02 21 10 22 02 21 10 24 02 21 10 27 02 21 10 30 1

MJ10 MJ14 MJ16 MJ18 MJ20 MJ22 MJ24 MJ27 MJ30

DN04 DN06 DN08 DN10 DN12 DN14 DN16 DN18 DN20

3/8 3/8 3/8 3/8 3/8

25 30 50 45 50 55 60 75 95

€

1 170.00 1 188.00 1 191.00 1 194.00 1 199.00 1 203.00 1 205.00 1 209.00 1 214.00

‘

107

Sockets, Socket sets 540

3/8''

CROW-FOOT spanners

540a

ISO DIN 1174-1 3120

CROW-FOOT spanners

‘

Caution! Modified settings on torque wrench (refer to note on page 196), Chrome Alloy Steel, chrome plated.

Code

A ''

a ''

L mm

b mm

a mm

S mm

R g

3/8 7/16 1/2 9/16

1/4 3/8 3/8 3/8

5/8 11/16

3/8 3/8 3/8 3/8

25.5 32 34.3 37.7 37.7 42.5 42.5 42.3 44.5 47 47 50 50 53 53 54.5 56.5 58 59.5 63 63 68 72 75 75.6 80.5 81.5

19.8 6.3 22.2 6.3 25.4 6.3 30 6.3 30 6.3 38 6.3 38 6.3 38 6.3 41 6.3 45 8 45 8 50 8 50 8 57 8 57 8 60 8 62 8 65 8 68 8 70 8 70 8 76 8 82 8 88 8 91 10 96 10 96 8

14.6 17.2 18.1 20.9 20.4 24.1 24 24 25.8 26.7 27.2 28.5 29.2 30.3 31.2 32.3 33.1 34.5 35.7 37.3 37.7 40.4 42 44.8 46 49.5 51.3

17 34 37 40 44 62 66 59 65 78 78 84 83 101 101 105 107 118 126 140 126 161 205 214 265 297 214

‘

01 50 00 24 02 50 00 28 02 50 00 32 02 50 00 34 02 50 00 36 02 50 00 38 02 50 00 40 02 50 00 42 02 50 00 44 02 50 00 48 02 50 00 50 02 50 00 52 02 50 00 54 02 50 00 56 02 50 00 58 02 50 00 60 02 50 00 62 02 50 00 64 02 50 00 65 02 50 00 66 02 50 00 67 02 50 00 68 02 50 00 70 02 50 00 72 02 50 00 74 02 50 00 76 03 50 00 78 1

‘

Code

A a mm ''

L mm

b mm

a mm

S mm

R g

25.5 25.5 25.5 32 34.3 34.3 37.7 37.7 37.7 42.5 42.5 42.5 42.4 44.5 44.5 44.5 44.4 47 47 47 50 50 53 54.5 56.5 63 63 63 72 75

19.8 19.8 19.8 22.2 25.4 25.4 30 30 30 38 38 38 38 41 41 41 41 45 45 45 50 50 57 60 62 70 70 70 82 88

6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 8 8 8 8 8 8 8 8 8 8 8 8 8

14.6 14.6 14.6 17.4 18.2 17.8 20.8 20.4 19.9 23.8 22.9 22.4 25 23.6 24.2 25.8 26.2 26.4 27.6 27.6 29.3 29.3 30.5 31.6 32.8 37.6 37.2 37.7 43.1 45.4

21 21 20 36 37 36 46 45 45 62 61 64 55 59 64 63 60 75 80 76 78 84 95 107 100 130 130 125 191 217

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

‘

01 20 00 08 01 20 00 09 01 20 00 10 02 20 00 11 02 20 00 12 02 20 00 13 02 20 00 14 02 20 00 15 02 20 00 16 02 20 00 17 02 20 00 18 02 20 00 19 02 20 00 20 02 20 00 21 02 20 00 22 02 20 00 23 02 20 00 24 02 20 00 25 02 20 00 26 02 20 00 27 02 20 00 28 02 20 00 30 02 20 00 32 02 20 00 34 02 20 00 36 02 20 00 40 02 20 00 41 02 20 00 42 02 20 00 46 02 20 00 50 1

8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 30 32 34 36 40 41 42 46 50

1/4 1/4 1/4 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8

€ 26.60 26.60 26.60 28.00 25.90 25.90 24.10 30.90 31.50 29.10 34.20 29.10 39.30 39.30 39.30 42.30 40.10 42.30 40.70 39.70 43.00 39.70 39.70 43.30 49.20 60.50 71.00 71.00 84.00 84.00

3/4 13/16 7/8 1 1 1/16 1 1/8 1 3/16 1 1/4 1 5/16 1 3/8 1 7/16 1 1/2 1 9/16 1 5/8 1 11/16 1 3/4 1 7/8 2 2 1/8 2 1/4 2 3/8

3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 1/2

€

1 26.30 1 26.90 1 26.30 1 26.30 1 31.40 1 31.40 1 31.40 1 34.20 1 39.70 1 39.70 1 39.70 1 38.30 1 39.70 1 39.70 1 40.70 1 39.70 1 49.20 1 49.20 1 50.50 1 66.00 1 69.50 1 73.50 1 79.50 1 82.00 1 106.00 1 109.00 1 112.00

‘

540a HD

CROW-FOOT spanners Heavy Duty

For particularly high loadings, e.g. stainless steel screw fittings. Full use of jaws in conjunction with standard ratchets. Caution! Modified settings on torque wrench (refer to note on page 196), chrome plated. Supplied without ratchet.

‘

Code

A ''

a ''

L mm

b mm

a mm

S mm

R g S

9/16 5/8 11/16 13/16

3/8 3/8 3/8 3/8

7/8 15/16

3/8 3/8 3/8 3/8

43.4 45 47.2 51 52 54 56 57 59 62 66.5 76 85 89 91.5 93 95

32 34.8 38 46.4 48 51.2 53.4 53.8 53.8 60 66 70 84 90 92.8 96 99

11 11 11 11 11 11 11 11 11 11 11 16 16 16 16 16 16

26.8 27.7 28.6 30.5 31.3 32.3 33.2 34.1 35 36.8 39.6 45 49.6 52.3 54.2 55.1 56

72 79 87 114 118 130 137 136 140 168 192 358 470 505 523 545 568

‘

02 50 10 34 02 50 10 36 02 50 10 38 02 50 10 42 02 50 10 44 02 50 10 46 02 50 10 48 02 50 10 50 02 50 10 52 02 50 10 56 02 50 10 62 03 50 10 64 03 50 10 69 03 50 10 72 03 50 10 74 03 50 10 75 03 50 10 76 1

‘

108

1 1 1/16 1 1/8 1 1/4 1 7/16 1 1/2 1 13/16 2 2 1/8 2 3/16 2 1/4

3/8 3/8 3/8 1/2 1/2 1/2 1/2 1/2 1/2

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

€ 34.20 40.40 40.90 43.00 51.50 51.50 51.50 51.50 51.50 52.50 64.50 65.00 67.50 107.00 130.00 138.00 139.00

3/8''

ISO DIN 1174-1 3120

f Adaptor

447

45CL

P Q

Clip strips

for socket retention, with 9 or 10 retaining clips. Supplied without sockets.

Caution! Modified settings on torque wrench (refer to note on page 196), American sizes: SAE AS 954-E, HPQ high performance steel, gunmetal finish.

‘

Code

‘

Code

A mm

d1 mm

d2 mm

h1 mm

h2 mm

S mm

R g

7 8 9 10 13

11.5 12.4 14 15.6 19.3

19 19 19 19 19

6 6 8 8 9.2

11 11 11 11 11

50.8 50.8 50.8 50.8 50.8

30 30 40 40 55

1 1 1 1 1

‘

02 18 10 07 02 18 10 08 02 18 10 09 02 18 10 10 02 18 10 13 1

€ 25.70 25.70 26.40 26.40 28.00

‘

f Adaptor

447a ‘

Code

A ''

d1 mm

d2 mm

h1 mm

h2 mm

S mm

R g

1/4 5/16 3/8 7/16

10.4 12.4 14.9 17 19 21 23

19 19 19 19 19 19 19

6 6 8 8 9.2 9.2 12

11 11 11 11 11 11 11

50.8 50.8 50.8 50.8 50.8 50.8 50.8

27 29 41 40 56 61 73

1 1 1 1 1 1 1

‘

02 47 00 16 02 47 00 20 02 47 00 24 02 47 00 28 02 47 00 32 02 47 00 34 02 47 00 36 1

1/2 9/16 5/8

L mm

R g

80 45 00 01 80 45 00 02

1 2

200 300

40 58

5 5

€ 5.60 5.60

‘

Drive tools and accessories 3/8'' u, finish: Chrome Alloy Steel, chrome plated.

€ 25.80 25.10 25.10 25.90 25.90 28.00 28.00

‘

447aSP

size

‘

422

fine tooth, reversible, 60 teeth, with 2-component handle, for use in confined spaces, re-engages after movement of 6°, DIN 3122/ISO 3315. ‘

Code

Spline-Drive adaptor

Ratchet

L mm

b mm

a mm

R g

194

236

‘

12 23 10 11

€ 39.00

‘

Caution! Modified settings on torque wrench (refer to note on page 196), MS-33787, MIL-W-8982, HPQ high performance steel, gunmetal finish.

435

Ratchet

reversible, 30 teeth, with 2-component handle, DIN 3122/ISO 3315. ‘

Code

L mm

b mm

a mm

R g

193

17.9

245

‘

12 11 10 10

€ 49.60

‘

435QR

‘

Code

Spline A size ''

d1 d2 h1 h2 S R mm mm mm mm mm g

‘

02 48 00 14 02 48 00 16 02 48 00 18 02 48 00 20 02 48 00 24 02 48 00 28 02 48 00 32 02 48 00 34 02 48 00 36 1

7 8 9 10 12 14 16 18 20

7/32 1/4 9/32 5/16 3/8 7/16 1/2 9/16 5/8

9.4 10.4 11.5 12.4 14.9 17 19 21 23

19 6 19 6 19 6 19 6 19 8 19 9.2 19 9.2 19 9.2 19 12

11 11 11 11 11 11 11 11 11

50.8 50.8 50.8 50.8 50.8 50.8 50.8 50.8 50.8

27 27 29 29 40 50 59 55 74

S 1 1 1 1 1 1 1 1 1

€ 36.70 36.70 36.70 36.70 36.70 37.70 38.80 38.80 39.80

QuickRelease ratchet

Ü ü

reversible, 30 teeth, with QuickRelease safety lock and 2-component handle, DIN 3122/ISO 3315. ‘

Code

L mm

b mm

a mm

R g

193

17.9

244

‘

12 11 00 20

€ 53.00

‘

435SG-QR

QuickRelease ratchet

Ü ü

reversible, 30 teeth, with QuickRelease safety lock and steel handle, DIN 3122/ISO 3315. ‘

Code

L mm

b mm

a mm

R g

193

17.9

275

‘

12 11 00 30

€ 56.50

‘

109

Sockets, Socket sets 445

3/8''

Ratchet adaptor

421

reversible, 20 teeth.

ISO DIN 1174-1 3120

Speeder brace

working radius 85 mm, DIN 3122/ISO 3315.

‘ ‘

Code

O mm

L mm

R g

‘

12 14 00 00

135

€ 106.00

Code

L mm

R g

386.5

385

L mm

R g

408

619

L mm

R g

253.5

222

L mm

R g

165

133

‘

12 10 00 10

€ 29.90

‘

450*

453

RATCHFIX ratchet

reversing lever near handle, 30 teeth, DIN 3122/ISO 3315. ‘

Code

L mm

b mm

a mm

R g

196

249

‘

€

Speeder brace

with steel handle, for greater axial power transmission, detachable palm head, working radius 85 mm, DIN 3122/ISO 3315. ‘

12 15 00 01

40.00

‘

Code

* to be discontinued

‘

12 10 00 02

€ 69.00

‘

452

Flexible joint ratchet 424

DIN 3122/ISO 3315, with 2-component handle. ‘

Code

‘

Code

L mm

b mm

a mm

R g

300

505

‘

12 26 00 01

‘

€

12 06 10 10 ‘

425

Sliding T-handle

DIN 3122/ISO 3315.

Spare parts set for ratchets No 422, 452

Content: 1 pinion; 1 pawl; 1 switching disk; 1 spring; 3 screws.

‘

Code ‘

12 07 00 00

‘

Code

R g

‘

59 25 10 05

€ 36.30

69.50

‘

7350/5

Flexible handle

€ 12.70

‘

€

425QR

26.20

QuickRelease sliding T-handle

‘

Ü ü

for ratchets from 12/97 ‘

with QuickRelease safety lock.

4350

Spare parts set for ratchets No 435, 435SG, 438, 439

Content: 1 pinion; 1 pawl; 1 lever with pin; 1 ball; 2 compression springs; 2 screws

‘

Code

L mm

R g

165

148

‘

12 07 10 00

€ 14.60

‘ ‘

Code

R g

‘

19 02 00 00

427

€ 24.80

Extensions

DIN 3123/ISO 3316.

‘

for ratchets from 1992 ‘

4350QR

Spare parts set for ratchets No 435QR, 435SG-QR

‘

Ü ü

Content: 1 pinion; 1 Pawl; 1 lever with pin; 1 ball; 2 compression springs; 2 screws ‘

Code

R g

‘

19 02 00 20 ‘

110

size

L mm

d mm

R g

12 01 00 05 1.5 12 01 00 01 3 12 01 00 06 5 12 01 00 02 6 12 01 00 03 10 12 01 00 04 18

38 76 125 160 240 455

17 17 17 17 17 17

36 67 104 127 188 345

5 5 5 5 5 5

Code ‘

€ 27.70

‘

€ 9.55 9.80 10.40 11.10 12.40 34.70

3/8''

ISO DIN 1174-1 3120

427W

Extensions with wobble-drive

13220

swivel angle 15° each side, max. torque 80 N m.

Special extension

for removing Boroscope plugs, with Boroscope plug locking, external hexagon size 16 mm. ‘

Code

L mm

R g

355

362

‘

12 27 00 20

€ 169.00

‘

Code

L mm

d mm

R g

3 5 6

76 125 160

17 17 17

67 104 127

5 5 5

‘

12 01 00 07 12 01 00 08 12 01 00 09

428

size

€

Universal joint

DIN 3123/ISO 3316.

12.00 13.70 14.50

‘

427QR

QuickRelease extensions

‘

Ü ü

Code

L mm

d mm

R g

18.8

‘

12 02 00 00

DIN 3123/ISO 3316.

€ 22.80

‘

428QR

QuickRelease universal joint

Ü ü

DIN 3123/ISO 3316, with QuickRelease safety lock.

‘

Code

size

L mm

d mm

R g

3 6 10

76 160 240

17 17 17

66 127 185

1 1 1

‘

12 01 10 01 12 01 10 02 12 01 10 03

€

‘

11.40 12.80 14.30

‘

433/1

Code 12 02 10 00

L mm

d mm

R g

€ 27.10

‘

431

Locking adaptor

Adaptor

with hexagon key wrench No 10760aCV 1/8''.

3/8'' ‘

Code

L mm

d mm

R g

‘

96 12 27 01

€ 32.05

‘

socket x 1/4'' plug (10 x 6.3), maximum torque 62 N m, DIN 3123/ISO 3316, HPQ high performance steel.

‘

Code

L mm

d mm

R g

17.2

‘

12 03 00 01

434

432 3/8''

L mm

d mm

R g

194

109

‘

Adaptor

‘

12 04 00 00

€ 23.80

socket x 1/2'' plug (10 x 12.5), DIN 3123/ISO 3316, HPQ high performance steel.

‘

1225

8.80

‘

Extension, flexible

(right hand rotation only), maximum torque 7 N m.

Code

€

Code

Special extension

L mm

d mm

R g

17.2

‘

12 03 00 03

€ 8.75

‘

409M/432M/ Set adaptors, 3 pieces 514M/3 1/4''

‘

Code

L mm

d mm

R g

150

128

‘

12 25 00 01

€

socket x 3/8'' plug, socket x 1/2'' plug, 1/2'' socket x 3/4'' plug. 3/8''

18.60

‘

Code

R g

120

‘

96 12 10 02

€ 53.80

‘

111

Sockets, Socket sets 432M 3/8''

3/8''

Adaptor

45/14/5i

1/2''

socket x plug (10 x 12.5 mm).

‘

Code

L mm

O mm

R g

‘

12 03 00 10

€ 17.30

‘

442

Bit holder

Code

L mm

d mm

R g

16.5

‘

R g

‘

96 02 01 32

1866

€ 215.25

‘

456/14/5i € 17.00

‘

443

in sturdy sheet steel case, 19 pieces Content: 14 sockets with bi-hexagon No 45: sizes 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22 mm 1 ratchet No 435 2 extensions No 427/3 (76 mm), No 427/10 (240 mm) 1 T-handle No 425 1 universal joint No 428

Code

‘

12 18 00 26

Socket set 3/8'' u

‘

ISO DIN 1174-1 3120

Bit holder

c 5/16'' inside hexagon, DIN 3126/ISO 1173 D 8. Internal hex drive with a collar-thrust spring (registered design). Bits are easy to insert, lock securely in position and can be removed just as easily; even hex bits with a wide groove (Type E, DIN 3126/ISO 1173).

Socket set 3/8'' u

in sturdy sheet steel case, 19 pieces Content: 14 sockets with hexagon No 456: sizes 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22 mm 1 ratchet No 435 2 extensions No 427/3 (76 mm), No 427/10 (240 mm) 1 T-handle No 425 1 universal joint No 428 ‘

R g

‘

Code

d mm

R g

16.5

‘

12 18 00 30

Code

L mm

‘

€

96 02 11 32

€ 216.85

‘

18.00

‘

45/11/4

1866

45/14/5iQR Socket set 3/8'' u

Socket set 3/8'' u

Ü ü

in sturdy sheet steel case, 15 pieces Content: 11 sockets with bi-hexagon No 45: sizes 8; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19 mm 1 ratchet No 435 2 extensions No 427/3 (76 mm), No 427/10 (240 mm) 1 universal joint No 428

in a sturdy ABS plastic case, 19 pieces Content: 14 sockets with bi-hexagon No 45: sizes 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22 mm 1 ratchet No 435QR 2 extensions No 427QR/3 (76 mm), No 427QR/10 (240 mm) 1 T-handle No 425QR 1 universal joint No 428QR

‘

R g

Code ‘

‘

€

R g

Code ‘

96 02 01 09

1602

181.85

‘

96 02 01 80

1650

€ 226.85

‘

456/11/4

Socket set 3/8'' u

45/13/5

in sturdy sheet steel case, 15 pieces Content: 11 sockets with hexagon No 456: sizes 8; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19 mm 1 ratchet No 435 2 extensions No 427/3 (76 mm), No 427/10 (240 mm) 1 universal joint No 428 ‘

Code

R g

‘

96 02 11 33

1780

€ 183.20

Socket set 3/8'' u

in sturdy sheet steel case, 18 pieces Content: 12 sockets with bi-hexagon No 45: sizes 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19 mm 1 socket with bi-hexagon, long, with rubber insert, No 4600: size 16 mm - 5/8'' 1 ratchet No 435 2 extensions No 427/3 (76 mm), No 427/10 (240 mm) 1 T-handle No 425 1 universal joint No 428 ‘

‘

Code

R g

‘

96 02 02 34 ‘

112

1939

€ 214.85

3/8''

ISO DIN 1174-1 3120

456/13/5

Socket set 3/8'' u

456/49/19/5 Socket set 3/8'' u in sturdy sheet steel case, 24 pieces Content: 11 sockets with hexagon No 456: sizes 8; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19 mm 1 socket with bi-hexagon, long, with rubber insert No 4600: size 16 mm - 5/8'' 7 INHEX sockets No 49: sizes 3; 4; 5; 6; 7; 8; 10 mm 1 ratchet No 435 2 extensions No 427/3 (76 mm), No 427/10 (240 mm) 1 T-handle No 425 1 universal joint No 428

in sturdy sheet steel case, 18 pieces Content: 12 sockets with hexagon No 456: sizes 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19 mm 1 socket with bi-hexagon, long, with rubber insert, No 4600: size 16 mm - 5/8'' 1 ratchet No 435 2 extensions No 427/3 (76 mm), No 427/10 (240 mm) 1 T-handle No 425 1 universal joint No 428 ‘

R g

Code ‘

96 02 02 02

1970

‘

€ 216.10

R g

Code ‘

€

‘

96 02 02 36

2749

276.95

‘

45ma/28/5

Socket set

3/8''

89N

in sturdy sheet steel case, 33 pieces Content: 28 sockets with bi-hexagon No 45: sizes 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22 mm No 45a: sizes 1/4; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16; 5/8; 11/16; 3/4; 13/16; 7/8'' 1 ratchet No 435 2 extensions No 427/3 (76 mm), No 427/10 (240 mm) 1 T-handle No 425 1 universal joint No 428 ‘

R g

Code ‘

96 02 01 22

3040

€ 318.35

‘

45/49/19/5

Socket set 3/8'' u

Code

R g

96 02 02 23 ‘

2675

R g

‘

96 02 01 28

5225

€ 488.70

‘

STAHLWILLE AS-Drive

‘

in sturdy sheet steel case, 44 pieces Content: 15 sockets with bi-hexagon No 45: sizes 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22 mm 2 sockets with bi-hexagon, long, with rubber insert, No 4600: size 16 mm - 5/8'', No 46: size 20.8 mm - 13/16'' 7 INHEX sockets No 49: sizes 3; 4; 5; 6; 7; 8; 10 mm 15 combination spanners No 13: sizes 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22 mm 1 ratchet No 435 2 extensions No 427/3 (76 mm), No 427/10 (240 mm) 1 T-handle No 425 1 universal joint No 428 ‘

in sturdy sheet steel case, 24 pieces Content: 11 sockets with bi-hexagon No 45: sizes 8; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19 mm 1 socket with bi-hexagon, long, with rubber insert No 4600: size 16 mm - 5/8'' 7 INHEX sockets No 49: sizes 3; 4; 5; 6; 7; 8; 10 mm 1 ratchet No 435 2 extensions No 427/3 (76 mm), No 427/10 (240 mm) 1 T-handle No 425 1 universal joint No 428

Code

Socket set 3/8'' u

€ 275.60

113

Sockets, Socket sets

3/8''

40/45/36/12 Socket set 1/4''; 3/8'' u

45TX/49TX/ Socket set TORX® 3/8'' u 15/5

in sturdy sheet steel case, 20 pieces Content: 7 sockets for external TORX® screws No 45TX: sizes E5; E6; E7; E8; E10; E12; E14 8 screwdriver sockets for internal TORX® screws No 49TX: sizes T9; T10; T15; T20; T25; T27; T30; T40 1 ratchet No 435 2 extensions No 427/5 (125 mm), No 427/10 (240 mm) 1 universal joint No 428 1 T-handle No 425 ‘

R g

‘

96 01 10 47

3005

96 02 27 03

89TX

€ 411.65

Socket set 3/8'' u

‘

96 02 01 08 ‘

6521

271.25

Socket set TORX® 1/4; 3/8; 1/2'' u

R g

Code ‘

98 81 09 08

2765

€ 339.00

‘

45/49/32/ 5TX

‘

R g

2005

‘

in sturdy sheet steel case, 50 pieces Content: 11 sockets with bi-hexagon No 45: sizes 8; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19 mm 9 sockets with bi-hexagon, long, No 46: sizes 10; 11; 12; 13; 14; 15; 17; 18; 19 mm 2 sockets with bi-hexagon, long, with rubber insert No 4600: size 16 mm - 5/8''; No 46: size 20.8 mm - 13/16'' 10 UNIFLEX sockets with bi-hexagon No 47: sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19 mm 5 INHEX sockets No 49: size 4; 5; 6; 8; 10 mm 4 bits k 1231: size 1; 1232: size 2; 1233: size 3; 1234: size 4 1 ratchet No 435 2 extensions No 427/3 (76 mm), No 427/10 (240 mm) 1 flexible handle No 424 1 T-handle No 425 1 universal joint No 428 1 flexible extension No 434 1 bit-holder No 443

Code

€

‘

45/41/9

R g

Code

‘

Code

ISO DIN 1174-1 3120

€ 898.20

Socket set 3/8'' u

in sturdy sheet steel case, 37 pieces Content: 11 sockets with bi-hexagon No 45: sizes 8; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19 mm 7 sockets for external TORX® screws No 45TX: sizes E5; E6; E7; E8; E10; E12; E14 6 INHEX sockets No 49: sizes 4; 5; 6; 7; 8; 10 mm 8 screwdriver sockets for internal TORX® screws No 49TX: sizes T9; T10; T15; T20; T25; T27; T30; T40 1 ratchet No 435 2 extensions No 427/3 (76 mm), No 427/10 (240 mm) 1 T-handle No 425 1 universal joint No 428 ‘

Code

R g

‘

96 02 01 19 ‘

114

3234

€ 388.65

3/8''

ISO DIN 1174-1 3120

45a/12/5

Socket set 3/8'' u

45a/22/8QR Socket set 3/8'' u

Ü ü

in sturdy sheet steel case, 17 pieces Content: 11 sockets with bi-hexagon No 45a: sizes 1/4; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16; 5/8; 11/16; 3/4; 13/16'' 1 socket with bi-hexagon, long, with rubber insert No 4600: size 16 mm - 5/8'', 1 ratchet No 435 2 extensions No 427/3 (76 mm), No 427/10 (240 mm) 1 T-handle No 425 1 universal joint No 428

in sturdy sheet steel case, 30 pieces Content: 14 sockets with bi-hexagon No 45a: sizes 1/4; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16; 5/8; 11/16; 3/4; 13/16; 7/8; 15/16; 1'' 8 UNIFLEX sockets with bi-hexagon No 47a: sizes 5/16; 3/8; 7/16; 1/2; 9/16; 5/8; 11/16; 3/4’’ 1 ratchet No 435SG-QR 3 extensions No 427/3QR (76 mm), No 427/6QR (160 mm), No 427/10QR (240 mm) 1 universal joint No 428QR 2 bit-holders No 442, No 443 1 speeder brace No 453

‘

R g

Code ‘

€ ‘

96 02 42 04

1914

R g

213.85

‘

Code ‘

45ma/28/5

Socket set

3/8''

96 02 42 07

45a/33/13

‘

R g

‘

96 02 01 22

€ 630.30

‘

in sturdy sheet steel case, 33 pieces Content: 28 sockets with bi-hexagon No 45: sizes 7; 8; 9; 10; 11; 12; 13; 14;15; 16; 17; 18; 19; 20; 21; 22 mm No 45a: sizes 1/4; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16; 5/8; 11/16; 3/4; 13/16; 7/8'' 1 ratchet No 435 2 extensions No 427/3 (76 mm), No 427/10 (240 mm) 1 T-handle No 425 1 universal joint No 428

Code

3947

3040

€ 318.35

‘

45a/14/8QR Socket set 3/8'' u

Ü ü

in sturdy sheet steel case, 22 pieces Content: 14 sockets with bi-hexagon No 45a: sizes 1/4; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16; 5/8; 11/16; 3/4; 13/16; 7/8; 15/16; 1'' 1 ratchet No 435SG-QR 3 extensions No 427/3QR (76 mm), No 427/6QR (160 mm), No 427/10QR (240 mm) 1 universal joint No 428QR 2 bit-holders No 442, No 443 1 speeder brace No 453

Socket set 3/8'' u

in sturdy sheet steel case, 46 pieces Content: 10 sockets with bi-hexagon No 45a: sizes 1/4; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16; 5/8; 11/16; 3/4'' 2 sockets with bi-hexagon, long, with rubber insert, No 4600: size 16 mm - 5/8'', No 46: size 20.8 mm - 13/16'' 7 sockets with bi-hexagon, long, No 46a: sizes 3/8; 7/16; 1/2; 9/16; 11/16; 3/4; 7/8'' 7 UNIFLEX sockets with bi-hexagon No 47a: sizes 3/8; 7/16; 1/2; 9/16; 5/8; 11/16; 3/4'' 3 INHEX sockets No 49a: sizes 1/8; 5/32; 3/16'' 4 bits k 1231: size 1; 1232: size 2; 1233: size 3; 1234: size 4 2 ratchets No 415, No 435 1 ratchet adaptor No 445 3 extensions No 427/3 (76 mm), No 427/6 (160 mm), No 427/10 (240 mm) 1 flexible extension No 434 (194 mm) 1 adaptor No 409 1 speeder brace No 421 1 flexible handle No 424 1 T-handle No 425 1 universal joint No 428 1 bit-holder No 443 ‘

Code

R g

‘

96 02 41 13

6540

€ 908.00

‘

Code

R g

‘

96 02 42 06

3637

€ 362.10

‘

115

Sockets, Socket sets

3/8''

ES 456/16/6

ISO DIN 1174-1 3120

TCS 456/31/8

x ö 175 x 350 x 40 mm, 22 pieces ‘

R g

Code ‘

96 83 81 11

1555

€ 230.30

‘

3/8'' a sizes 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22 mm

No 456

350 x 350 x 32 mm, 39 pieces ‘

R g

‘

No 425

3/8''

D 165 mm

No 427/3

3/8''

D a 76 mm

No 427/6

3/8''

D a 160 mm

No 427/10

3/8''

D a 240 mm

‘

No 428

3/8''

D a 46 mm

‘

3/8''

No 435 ‘

83 81 20 32

Code 96 83 06 02

2701

103

8.15

No 456

3/8'' a sizes 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22 mm

No 46

3/8''

No 47

a sizes 10; 11; 12; 13; 14; 15; 16 mm

No 1049

3/8''

a size 9 mm

No 49X

3/8''

a sizes M6; M8; M10

No 427/3

3/8''

D a 76 mm

No 427/5

3/8''

D a 125 mm

No 427/10

3/8''

D a 240 mm

No 428

3/8''

D a 46 mm

No 431

1/4''

D 3/8'' a

No 432

1/2''

D 3/8'' a

No 435

3/8''

No 452

3/8''

‘

TCS 456/16/7

‘

x ö

‘

175 x 350 x 40 mm, 23 pieces

‘

R g

‘

96 83 02 18

1400

‘

€

‘

248.80 ‘

‘

No 456

a sizes 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22 mm

No 427/3

3/8''

D a 76 mm

No 427/5

3/8''

D a 125 mm

No 427/10

3/8''

D a 240 mm

No 428

3/8''

D a 46 mm

No 431

1/4''

D 3/8'' a

No 432

1/2''

D 3/8'' a

No 435

3/8''

a sizes 10; 11; 12; 13 mm

3/8''

‘

Code

658.15

‘

Empty tray

€

‘

3/8''

‘

Tool Control System The safety inlay system

TCS 456/16/4 MF

Designed to fit our Tool Trolleys and Tool Boxes

x ö

With yellow signal cut-outs to show whether all tools are in their places

175 x 350 x 45 mm, 20 pieces ‘

R g

Code ‘

96 83 03 57

1123

€ 222.15

‘

No 456

3/8'' a sizes 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22 mm

No 427/5

3/8''

D a 125 mm

No 427/10

3/8''

D a 240 mm

No 428

3/8''

D a 46 mm

No 435

3/8''

‘

116

12.5

ISO DIN 1174-1 3120

1/2''

f Sockets

e Sockets

P Q

DIN 3124/ISO 2725-1, ASME B 107.5M, E DIN EN 3709 (test loads), HPQ high performance steel, chrome plated.

metric sizes: DIN 3124/ISO 2725-1, E DIN EN 3709, ASME B 107.5 M, American sizes: ASME B 107.1, Fed. Spec. GGG-W-641, SAE AS 954-E (test loads), HPQ high performance steel, chrome plated.

t1 t1

Code

‘

Code

A mm

d1 mm

d2 mm

d3 mm

L t1 mm mm

t2 mm

R g S

8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 30 31 32 34

13 13.7 14.5 15.8 17 18.3 19.9 21.2 22.4 24 24.7 26.2 27.2 28.7 29.7 30.7 32 33.2 34.4 36.2 37.4 39.7 42.2 42.2 45

22 22 22 22 22 22 22.7 22.7 23.7 23.7 23.7 25 25 26 26 26 26 25 25 26 27 28 28 28 28

7 8 9 10 11 12 13 14 15 15.2 17 18 19 20 21 20 21 22 23 24 25 27 28 29 31

38 38 38 38 38 38 38 38 38 38 38 38 42 42 42 42 42 42 42 45 45 45 47 47 47

9 9 9 9.5 13 13 13 13.5 13.5 15 15.5 16 17 18 18 18 18.5 18.5 18.5 19.5 19.5 20.5 22 22 22

22 22 22 22 22 22 20.5 20.2 19.6 19.6 19.1 21.7 25.5 25.2 24.9 25.4 24.9 24.6 24.3 27 26.7 26.1 27.9 27.6 27

56 57 57 52 58 60 60 62 63 66 71 78 89 104 113 114 117 119 122 150 158 171 215 189 209

‘

03 01 00 08 03 01 00 09 03 01 00 10 03 01 00 11 03 01 00 12 03 01 00 13 03 01 00 14 03 01 00 15 03 01 00 16 03 01 00 17 03 01 00 18 03 01 00 19 03 01 00 20 03 01 00 21 03 01 00 22 03 01 00 23 03 01 00 24 03 01 00 25 03 01 00 26 03 01 00 27 03 01 00 28 03 01 00 30 03 01 00 31 03 01 00 32 03 01 00 34 1

‘

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5

A mm

d1 mm

d2 mm

d3 mm

L mm

t1 t2 mm mm

R g S

8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 30 32 34

13 13.7 14.5 15.8 17 18.3 19.9 21.2 22.4 24 24.7 26.2 27.2 28.7 29.7 30.7 32 33.2 34.4 36.2 37.4 39.7 42.2 45

22 22 22 22 22 22 22.7 22.7 23.7 23.7 23.7 25 25 26 26 26 26 26 25 26 27 28 28 28

7 8 9 10 11 12 13 14 15 15.2 17 18 19 20 21 20 21 22 23 24 25 27 29 31

38 38 38 38 38 38 38 38 38 38 38 38 42 42 42 42 42 42 42 45 45 45 47 47

9 9 9 9.5 13 13 13 13.5 13.5 15 15.5 16 17 18 18 18 18.5 18.5 18.5 19.5 19.5 20.5 22 22

56 56 60 58 52 51 59 63 65 70 73 79 95 110 115 119 125 128 132 161 166 186 200 235

‘

€ 6.75 6.95 5.65 5.90 5.85 5.65 6.10 6.40 6.25 6.65 7.05 6.65 7.45 7.85 7.15 8.90 7.90 10.50 10.10 10.10 11.80 10.60 14.50 10.90 16.50

03 03 00 08 03 03 00 09 03 03 00 10 03 03 00 11 03 03 00 12 03 03 00 13 03 03 00 14 03 03 00 15 03 03 00 16 03 03 00 17 03 03 00 18 03 03 00 19 03 03 00 20 03 03 00 21 03 03 00 22 03 03 00 23 03 03 00 24 03 03 00 25 03 03 00 26 03 03 00 27 03 03 00 28 03 03 00 30 03 03 00 32 03 03 00 34 1

22 22 22 22 22 22 20.5 20.2 19.6 19.6 19.1 21.7 25.5 25.2 24.9 25.4 24.9 24.6 24.3 27 26.7 26.1 27.6 27

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5

€ 6.35 6.50 5.50 5.85 5.75 5.65 5.90 6.35 6.30 6.65 6.95 6.65 7.50 7.75 7.15 8.90 7.90 10.50 9.95 9.85 12.00 9.85 10.40 14.00

‘

ES 52/17

‘

f Sockets

50a ‘

Code

A ''

d1 mm

d2 mm

d3 mm

L mm

t1 t2 mm mm

R g S

14.3 16.3 18.3 20.3 19/32 21.3 5/8 22.4 11/16 24.2 3/4 26.2 25/32 27 13/16 28.2 7/8 29.7 15/16 32 1 33.7 1 1/16 36.2 1 1/8 38.1 1 3/16 39 1 1/4 40 1 5/16 41.8 1 3/8 46 1 7/16 49.4 1 1/2 51

22 22 22 22.7 22.7 23.7 23.7 25 25 25 26 26 27 26 28 28 28 28 28 31 31

8.3 9.9 11.5 13.1 13.5 15 16.5 18 18.6 19.4 21 22.6 24.2 25.8 27.4 28 30.5 32.1 33.7 34 35

38 38 38 38 38 38 38 38 41 41 42 42 42 45 45 45 45 47 50 54 54

9 9 13 13 13.5 13.5 15.5 16 16 16.5 18 18.5 18.5 19.5 20 20.5 21 22 23 26 26

57 59 59 62 61 62 68 78 90 95 111 121 135 155 167 178 196 210 232 320 330

‘

03 41 00 24 03 41 00 28 03 41 00 32 03 41 00 34 03 41 00 35 03 41 00 36 03 41 00 38 03 41 00 40 03 41 00 41 03 41 00 42 03 41 00 44 03 41 00 46 03 41 00 48 03 41 00 50 03 41 00 52 03 41 00 54 03 41 00 56 03 41 00 58 03 41 00 60 03 41 00 62 03 41 00 64 1

3/8 7/16 1/2 9/16

22 22 22 20.2 20.1 19.6 19.2 21.7 24.6 24.3 24.9 24.4 24 26.5 26 25.9 25.1 26.7 29.2 33.1 32.8

10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5

€ 6.25 6.25 6.20 7.00 7.00 7.00 7.10 7.10 7.75 7.95 8.45 8.70 9.30 10.80 10.90 11.20 11.20 14.10 17.40 19.70 19.90

175 x 350 x 47 mm, 17 pieces ‘

R g

Code ‘

96 83 81 12

1760

€ 130.10

‘

No 52

a sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 27; 30; 32 mm 1/2''

‘

83 81 20 30

Empty tray

107

8.15

‘

117

12.5

Sockets, Socket sets

1/2''

TCS 52/17

f Sockets

x ö

ISO DIN 1174-1 3120

P Q

175 x 350 x 40 mm, 17 pieces ‘

R g

€

‘

96 83 81 77

1605

Code

140.55

‘

a sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 27; 30; 32 mm 1/2''

No 52

‘

Code

A mm/''

d1 d2 d3 L t1 t2 mm mm mm mm mm mm

R g S

10 13 14 15 16 16-5/8 1) 17 18 19 20.8-13/16 1) 21 22 24 26 27 2) 30 2) 32

14.5 18.3 19.9 21.2 22.4 22.4 24 24.7 26.2 27.7 28.7 29.7 32 34.4 36.2 39.7 42.4

90 122 129 132 145 137 132 170 186 194 231 200 280 334 294 341 461

‘

TCS 52/18 MF

x ö

175 x 350 x 55 mm, 18 pieces ‘

R g

Code

€

‘

96 83 03 59

1850

159.15

‘

1/2'' a sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 27; 30; 32; 34 mm

No 52

03 02 00 10 03 02 00 13 03 02 00 14 03 02 00 15 03 02 00 16 03 02 02 16 03 02 00 17 03 02 00 18 03 02 00 19 03 02 02 08 03 02 00 21 03 02 00 22 03 02 00 24 03 02 00 26 03 02 00 27 03 02 00 30 03 02 00 32

‘

22 22 22.7 22.7 23.7 23.7 23.7 23.7 25 26 26.5 27.5 30 32.5 34 37.5 40

9 12 13 14 15 15.4 16 17 18 20 20 21 21 23 27 30.2 29

83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83

19 35 35 35 35 19 35 35 35 22 35 35 35 35 20 35 35

67 67 65.2 64.9 64.6 64.5 64.3 64.1 66.7 66.2 66.2 65.5 66.1 65.3 60 65 63.9

10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5

€ 16.20 14.00 15.00 16.10 16.40 17.80 15.60 16.80 15.20 19.80 17.00 17.30 17.70 22.30 20.90 21.20 21.80

‘

) with rubber insert for spark plugs ) for diesel injector (Audi, Daihatsu, Ford, Mazda, Mercedes, Mitsubishi, Nissan, Opel, Peugeot, Toyota, VW, Volvo)

TCS 50/51/52/32

x ö

‘

f Sockets

51a ‘

Code

175 x 350 x 50 mm, 32 pieces ‘

R g

Code

€

‘

96 83 81 91

2950

265.20

‘

No 50

a sizes 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 30 mm

No 52

1/2'' a sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 27; 30; 32 mm

1/2''

‘

1/2''

No 51 ‘

a sizes 22; 27 mm

03 42 00 24 03 42 00 28 03 42 00 32 03 42 00 34 03 42 00 36 03 42 00 38 03 42 00 40 03 42 00 42 03 42 00 44 03 42 00 46 03 42 00 48 03 42 00 50 03 42 00 52 03 42 00 54 03 42 00 56 03 42 00 58 03 42 00 60 03 42 00 62 03 42 00 64 1

TCS 50a/17

x ö

‘

175 x 350 x 40 mm, 17 pieces ‘

R g

Code

€

‘

96 83 87 80

1600

161.15

‘

No 50a

a sizes 3/8; 7/16; 1/2; 9/16; 19/32; 5/8; 11/16; 3/4; 25/32; 13/16; 7/8; 15/16; 1; 1 1/16; 1/2''

1 1/8; 1 3/16; 1 1/4'' ‘

118

A ''

d1 d2 mm mm

d3 L t1 t2 mm mm mm mm

R g S

14.3 16.3 18.3 20.3 22.4 24.2 26.2 27.7 29.7 32 33.7 36.2 38.1 39 40 41.8 46 49.4 51

8.3 9.9 11.5 13.1 15 16.5 18 19.5 21 22.6 24.2 25.8 27.4 28 30.5 32.1 33.7 34 35

93 102 122 131 145 158 188 170 200 281 260 359 300 377 433 479 506 635 675

‘

3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16

1 1 1/16 1 1/8 1 3/16 1 1/4 1 5/16 1 3/8 1 7/16 1 1/2

22 22 22 22.7 23.7 23.7 25 26 27.5 30 32 34 36 37 38 40 44 47 49

83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83

19 19 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35

67 67 67 65.2 64.6 64.2 66.7 66.3 65.9 65.7 65 64.5 64 63.9 63.1 62.7 62.2 62.1 61.8

5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

€ 19.10 19.10 17.30 17.30 18.70 20.10 19.70 22.00 22.40 24.50 24.80 27.90 29.40 26.80 28.90 28.50 30.20 30.50 31.70

12.5

ISO DIN 1174-1 3120

1/2''

51/8

Set: Sockets

p Sockets

50TX

P Q

for external TORX® screws, HPQ high performance steel, chrome plated.

long. Content: 13; 17; 19; 22; 24; 27; 30; 32 mm

‘

R g

2780

Code ‘

96 03 02 02

€

167.70

‘

size

C d1 d2 d3 L t1 t2 R mm mm mm mm mm mm mm g S

E10 E11 E12 E14 E16 E18 E20 E24

9.4 10.1 11.1 12.9 14.7 16.6 18.4 22.1

in sturdy sheet steel box ‘

Code ‘

e Sockets

51S

P Q

03 27 00 10 03 27 00 11 03 27 00 12 03 27 00 14 03 27 00 16 03 27 00 18 03 27 00 20 03 27 00 24 1

extra deep, DIN 3124/ISO 2725-1, E DIN EN 3710, E DIN EN 3709 (test loads), HPQ high performance steel, chrome plated.

13 14 14.9 16.7 19 21 23.5 27.8

22 5.6 38 22 6 38 22 7.2 38 22 8 38 22 9.3 38 26.5 10.4 38 26.5 12 38 26 14.1 41.2

9.5 9.5 9.5 11 12.5 13.5 15 17.5

22 22 22 22 22 22 22 23.6

53 50 55 56 60 92 98 120

10 10 10 10 10 10 10 10

€ 8.80 9.05 8.85 9.15 9.40 9.85 9.85 13.00

‘

50TX/7

‘

Code

A mm/''

d1 d2 d3 L t1 t2 R mm mm mm mm mm mm g S

17 19 20.8-13/16 1) 22

24 26.2 27.7 29.7

‘

03 24 00 17 03 24 00 19 03 24 02 08 03 24 00 22

p Set: Sockets

23.7 25 26 27.5

16 18 20 21

83 83 83 83

35 35 22 35

64.3 66.7 66.2 65.9

157 190 196 246

10 10 10 10

€

for external TORX® screws. Content: E10; E12; E14; E16; E18; E20; E24

19.00 19.00 21.20 23.00

‘

) with rubber insert for spark plugs and for tightening and untightening wheel nuts on Japanese cars

‘

5100

Rubber insert

‘

for size 20.8 mm (No 51; 51S; 46).

Code

R g

623

R g

1155

‘

96 03 27 03

‘

Code

R g

‘

09 01 00 01

‘

€

in carton packing ‘

1.15

‘

50TX/8

e UNIFLEX sockets

€ 71.90

p Set: Sockets

for external TORX® screws. Content: E10; E11; E12; E14; E16; E18; E20; E24

Chrome Alloy Steel, chrome plated.

‘

Code ‘

€

‘

Code

A mm

d1 d2 d3 L t1 t2 R mm mm mm mm mm mm g S

10 13 16 17 18 19

14.7 18.4 22.4 23.5 25 26.3

‘

96 03 27 04 €

96.85

‘

in sturdy sheet steel box ‘

03 04 00 10 03 04 00 13 03 04 00 16 03 04 00 17 03 04 00 18 03 04 00 19 1

25 25 25 25 25 25

9 12 15 16 17 18

70 70 69 70 70 70

12 12 13 13 12 12

20 20 17 18 18 17.5

136 140 141 141 145 148

1 1 1 1 1 1

32.50 34.50 34.20 36.10 34.20 34.00

‘

119

12.5

Sockets, Socket sets

1/2''

TCS 50TX/54TX/17

i INHEX sockets

x ö

ISO DIN 1174-1 3120

for hexagon socket head screws, DIN 7422, Chrome Alloy Steel, chrome plated.

175 x 350 x 40 mm, 17 pieces ‘

R g

Code

‘

€

‘

96 83 87 63

1382

202.15

‘

No 50TX

1/2'' a sizes E10; E11; E12; E14; E16; E18; E20; E24

No 54TX

a sizes T20; T25; T27; T30; T40; T45; T50; T55; T60

‘

1/2''

‘

50aPSP

h Sockets spline-drive

Code 03 05 00 04 03 05 00 05 03 05 00 06 03 05 00 07 03 05 00 08 03 05 00 10 03 05 00 12 03 05 00 14 03 05 00 17 03 05 00 19 1

B mm

L1 mm

L2 mm

d mm

R g

4 5 6 7 8 10 12 14 17 19

60 60 60 60 60 60 60 60 60 60

22 22 22 22 22 22 20 20 20 20

22.7 22.7 22.7 22.7 22.7 22.7 23.7 23.7 27.5 31

68 68 71 75 79 97 122 135 186 242

5 5 5 5 5 5 5 5 5 5

‘

MS-33787, HPQ high performance steel, gunmetal finish.

i INHEX sockets

54a ‘

Code

B ''

L1 mm

L2 mm

d mm

R g

7/32 1/4 5/16 3/8

60 60 60 60 60 60 60 60 60

22 22 22 22 22 20 20 20 20

22.7 22.7 22.7 22.7 22.7 23.7 23.7 27.5 31

70 75 81 97 103 125 137 169 244

5 5 5 5 5 5 5 5 2

‘

03 45 00 14 03 45 00 16 03 45 00 20 03 45 00 24 03 45 00 28 03 45 00 32 03 45 00 34 03 45 00 36 03 45 00 40 1

‘

Code

€ 8.40 8.40 8.40 8.40 9.30 9.30 10.90 11.40 13.20 19.90

Spline A d1 d2 d3 L t1 t2 R size '' mm mm mm mm mm mm g

‘

03 01 20 24 12 03 01 20 28 14 03 01 20 34 18

3/8 7/16 9/16

15.5 22 8.6 18 23.7 10.4 22 23.7 13.5

38 38 38

9.5 11 12

22 22 20

55 65 71

S 5 5 5

€ 21.10 20.20 24.80

7/16 1/2 9/16 5/8 3/4

€ 8.55 8.55 9.30 9.30 10.80 10.40 11.90 12.80 20.30

‘

50aPLSP

54/10

h Socket spline-drive

INHEX socket set No 54

sizes 4; 5; 6; 7; 8; 10; 12; 14; 17; 19 mm

extra deep bolt clearance, MS-33787, HPQ high performance steel, gunmetal finish.

‘

R g

‘

Code

Spline A d1 d2 d3 L t1 t2 R size '' mm mm mm mm mm mm g

‘

03 01 30 28 14

7/16

18 23.7 10.4 50

S 5

€ 20.20

‘

Code

€

‘

96 03 05 08

1655

126.50

‘

in sturdy sheet steel case ‘

51aP

h Socket

ES 54/54KK

extra deep bolt clearance, HPQ high performance steel, gunmetal finish. For the brakes on A320/A321.

175 x 350 x 38 mm, 14 pieces ‘

R g

Code

€

‘

96 83 81 14

1630

161.25

‘

Code

A d1 d2 d3 L t1 t2 R '' mm mm mm mm mm mm g

‘

03 42 10 41 ‘

25/32

23 17.9 80

182

S 1

€ 77.50

1/2'' a sizes 4; 5; 6; 7; 8; 10; 12; 14; 17; 19 mm

No 54KK

1/2''

‘

83 81 20 46 ‘

120

No 54

Empty tray

a sizes 5; 6; 8; 10 mm 108

8.15

12.5

1/2''

ISO DIN 1174-1 3120

TCS 54/54X/16

ES 1054/2054

x ö 175 x 350 x 35 mm, 16 pieces

175 x 175 x 30 mm, 6 pieces

‘ ‘

R g

Code

€

‘

Code

R g

€

900

69.00

‘

96 83 87 62

1665

191.80

‘

96 83 81 64 ‘

a sizes 4; 5; 6; 7; 8; 10; 12; 14; 17 mm 1/2''

No 54 ‘

1/2''

‘

1/2'' a sizes M5; M6; M8; M10; M12; M14; M16

No 54X

1/2''

No 1054 No 2054 83 81 20 81

a sizes 8; 10; 12 mm a sizes 5; 6; 14 mm

Empty tray

4.10

‘

j INHEX sockets

54IC

i INHEX sockets

for hexagon socket head screws with guide pin, Chrome Alloy Steel, chrome plated.

for hexagon socket head screws, extra long, DIN 7422, Chrome Alloy Steel, chrome plated.

‘

Code

B mm

L1 L2 mm mm

d mm

R g

‘

03 15 12 05 03 15 12 06 03 15 12 07 03 15 12 08 03 15 14 10 03 15 14 12 03 15 14 14 1

2054/5 5 2054/6 6 2054/7 7 1054/8K 8 1054/10 10 1054/12 1) 12 2054/14 14

120 82 120 82 120 82 120 82 140 102 140 100 140 100

22.7 22.7 22.7 22.7 22.7 23.7 23.7

‘

78 84 96 104 150 197 231

5 5 5 5 5 5 5

€ 9.05 9.05 9.70 10.10 10.80 12.60 13.30

Code

B mm

L1 mm

L2 mm

d mm

R g

5 6 8 10 12 14

60 60 60 60 60 60

22 22 22 22 20 20

22.7 22.7 22.7 22.7 23.7 23.7

70 71 70 95 120 131

5 5 5 5 5 5

‘

03 07 00 05 03 07 00 06 03 07 00 08 03 07 00 10 03 07 00 12 03 07 00 14 1

€ 9.90 9.90 11.10 11.60 13.40 13.80

‘

) For fitting radiators

i INHEX sockets

54KK

‘

i INHEX sockets

with ball point hexagon, for hexagon socket head screws, swivel angle up to 25° each side, Chrome Alloy Steel, chrome plated.

for hexagon socket head screws, special lengths, DIN 7422, Chrome Alloy Steel, chrome plated.

‘

Code

‘

B mm

L1 mm

L2 mm

d mm

R g

5 6 7 1) 8 10

100 100 100 100 100

62 62 62 62 62

22.7 22.7 22.7 22.7 22.7

75 80 84 95 120

5 5 5 5 5

‘

Code

B mm

L1 L2 mm mm

d mm

R g

1054/5 1054/6 3054/6 1) 1054/6L 1054/7 3054/8 1054/8 1054/13

5 6 6 6 7 8 8 13

180 20 70 32 100 62 220 182 100 62 80 42 140 102 70 25

22 22.7 22.7 22.7 22.7 22.7 22.7 24

118 72 80 108 87 88 114 130

5 5 5 5 5 5 5 5

‘

03 15 18 05 03 15 07 06 03 15 10 06 03 15 22 06 03 15 10 07 03 15 08 08 03 15 14 08 03 15 07 13 1

€ 15.70 9.05 15.60 18.60 15.60 13.60 16.60 23.60

03 28 00 05 03 28 00 06 03 28 00 07 03 28 00 08 03 28 00 10 1

€ 10.70 10.70 12.40 11.90 12.20

‘

) Application: BMW brakes

‘

ES 54KK/5

‘

) for intake manifolds on 5-cylinder diesel engines on VW/Audi and T4 vans

‘

175 x 175 x 30 mm, 5 pieces ‘

Code

R g

€

505

61.90

‘

96 83 81 65 ‘

No 54KK ‘

83 81 20 51

Empty tray

1/2''

a sizes 5; 6; 7; 8; 10 mm 55

4.00

‘

121

12.5

Sockets, Socket sets

1/2''

i INHEX sockets

1054KK

ISO DIN 1174-1 3120

m Screwdriver sockets

54X

for trisquare socket head screws (XZN®), DIN 2324, Chrome Alloy Steel, chrome plated.

with ball point hexagon, for hexagon socket head screws, swivel angle up to 25° each side, special lengths, Chrome Alloy Steel, chrome plated. ‘

Code

B mm

L1 mm

L2 mm

d mm

R g

5 8

238 238

200 200

22.7 22.7

145 154

5 5

‘

€ ‘

03 31 00 05 03 31 00 08

18.40 20.70

‘

Code

size

L1 mm

L2 mm

d mm

R g

M5 M6 M8 M10 M12 M14 M16

60 60 60 60 60 60 60

22 22 22 22 20 20 20

22.7 22.7 22.7 22.7 23.7 23.7 27.5

67 74 79 94 120 128 174

5 5 5 5 5 5 5

‘

03 06 00 05 03 06 00 06 03 06 00 08 03 06 00 10 03 06 00 12 03 06 00 14 03 06 00 16

q Screwdriver sockets

54CV

for spline socket head screws (Ribe CV®), Chrome Alloy Steel, chrome plated.

€ 10.40 10.40 10.40 12.00 12.70 13.90 15.20

‘

m Screwdriver sockets

3054X

‘

Code

size

L1 mm

L2 mm

d mm

R g

M5 M6 M7 M8 M9 M10 M12 M13 M14 M16

60 60 60 60 60 60 60 60 60 63

22 22 22 22 22 22 20 20 20 23

22.7 22.7 22.7 22.7 22.7 22.7 23.7 23.7 23.7 27.5

69 71 78 78 92 95 119 123 126 163

5 5 5 5 5 5 5 5 5 5

‘

03 09 00 05 03 09 00 06 03 09 00 07 03 09 00 08 03 09 00 09 03 09 00 10 03 09 00 12 03 09 00 13 03 09 00 14 03 09 00 16 1

€ 10.20 9.90 12.60 9.90 13.80 11.10 11.60 16.30 13.60 14.80

‘

Application: Size M7, for brakes, cylinder head screws, bodywork and motor jobs incl. valve covers and spark plug covers on Fiat vehicles Size M8, bodywork and motor jobs incl. valve covers and spark plug covers on Fiat vehicles Size M9, brakes, cylinder head screws (1.2 l; 8V/16V) on Fiat vehicles Size M10, for cylinder head screws (1.2 l; 8V/16V) on Fiat vehicles Size M12, for cylinder head screws on Fiat 2.0 l engines Size M13, for brakes, cylinder head screws on Fiat vehicles, cylinder head screws on Alfa vehicles, e.g. 1.6 l; 16V engines Size M14, M16, for cylinder head screws on Alfa vehicles, e.g. 1.6 l; 16V engines ‘

54CV/9

for trisquare socket head screws (XZN®), DIN 2324, extra long, Chrome Alloy Steel, chrome plated.

‘

Code

size

L1 mm

L2 mm

d mm

R g

M8 M10 M12 M14

140 140 140 140

102 102 102 100

22.7 22.7 22.7 23.7

109 142 160 225

5 5 5 1

‘

03 26 14 08 03 26 14 10 03 26 14 12 03 26 14 14

€ 11.10 15.50 14.00 17.30

‘

Application: sizes M10 and M12 for cylinder head screws on VW/Audi, Opel, Mercedes-Benz, size M14 for cylinder head screws on VM diesel engines, Chrysler ‘

3054X/54X/8

m Set: Screwdriver sockets

for trisquare socket head screws (XZN®), 8 pieces, Content: 3054X: M8, M10, M12 54X: M6, M8, M10, M12, M14

q Set: Screwdriver sockets

for spline socket head screws (Ribe CV®), 9 pieces, Content: M5; M6; M7; M8; M9; M10; M12; M13; M14

‘

Code

R g

1460

‘

96 03 26 06

€ 120.40

‘

in sturdy sheet steel case ‘

m Screwdriver sockets

‘

Code

R g

1420

‘

96 03 09 01 ‘

in sturdy sheet steel case ‘

€ 127.90

for trisquare socket head screws (XZN®), special lengths, DIN 2324, Chrome Alloy Steel, chrome plated. ‘

Code

size

L1 mm

L2 mm

d mm

R g

1054x 2054x 2054x 2054x

M8 M8 M10 M12

80 120 110 110

42 82 72 70

22.7 22.7 22.7 23.7

86 104 130 168

5 5 5 5

‘

03 16 08 08 03 16 12 08 03 16 11 10 03 16 11 12 ‘

Application: No 1054x, size M8, for jointed shafts on VW/Audi ‘

122

€ 14.40 15.70 15.00 16.80

12.5

1/2''

ISO DIN 1174-1 3120

n Screwdriver sockets

54TX

ES 54X/54TX

for inside TORX screws, Chrome Alloy Steel, chrome plated.

175 x 350 x 38 mm, 16 pieces ‘

‘

Code

size

C mm

L1 L2 mm mm

d mm

R g

‘

03 10 00 20 03 10 00 25 03 10 00 27 03 10 00 30 03 10 00 40 03 10 00 45 03 10 00 50 03 10 00 55 03 10 00 60 03 10 00 70 1

T20 T25 T27 T30 T40 T45 T50 T55 T60 T70

3.8 4.4 5 5.5 6.6 7.8 8.8 11.2 13.2 15.5

55 55 55 55 55 55 55 58 58 60

17 17 17 17 17 17 17 18 18 20

22.7 71 22.7 71 22.7 72 22.7 72 22.7 72 22.7 74 22.7 86 23.7 112 23.7 113 27.5 155

S 5 5 5 5 5 5 5 5 5 1

€ 10.60 10.60 10.60 10.60 11.30 11.30 12.20 13.90 14.50 19.40

96 83 81 15

‘

54TX/9

1600

€ 198.75

‘

No 54X

1/2'' a sizes M5; M6; M8; M10; M12; M14; M16

No 54TX

1/2'' a sizes T20; T25; T27; T30; T40; T45; T50; T55; T60

‘

83 81 20 45

Empty tray

111

8.15

‘

n Screwdriver sockets

‘

Application: size T55 for the cylinder head screws on the Opel Omega V6

R g

Code ‘

for inside TORX® screws, extra long, Chrome Alloy Steel, chrome plated.

n Set: Screwdriver sockets

for inside TORX® screws, 9 pieces, Content: sizes T20; T25; T27; T30; T40; T45; T50; T55; T60 ‘

Code

C L1 L2 size mm mm mm

d mm

R g

1054TX 2054TX 2054TX 1054TX 1054TX 1054TX

T30 T40 T45 T50 T55 T60

22.7 22.7 22.7 22.7 22.7 23.7

99 110 111 143 159 221

5 5 5 5 5 5

‘

03 13 12 30 03 13 14 40 03 13 14 45 03 13 14 50 03 13 14 55 03 13 14 60 1

5.5 6.6 7.8 8.8 11.2 13.2

120 140 140 140 140 140

82 102 102 102 102 100

€ 11.90 12.30 12.30 13.60 13.70 16.90

‘ ‘

Code

R g

820

‘

96 03 10 04

€

Application: size T55 for the cylinder head screws on various Ford models, e.g. Mondeo 16V ‘

108.60

n Screwdriver sockets

1054TX

‘

packed in carton ‘

for inside TORX® screws, extra long, Chrome Alloy Steel, chrome plated.

54TX/10

n Socket set TORX®

for inside TORX® screws, 10 pieces, Content: sizes T20; T25; T27; T30; T40 (2x); T45; T50; T55; T60

‘

Code

size

C mm

L1 mm

L2 mm

d mm

R g

T40 T45 T70

6.6 7.8 15.5

120 120 107

82 82 67

22.7 22.7 23.7

100 100 201

5 5 5

19.00 19.10 26.40

R g

€

950

84.80

‘

03 13 12 40 03 13 12 45 03 13 10 70

€

‘ ‘

Code

R g

‘

96 03 10 05

1300

ES 1054/2054TX/6

€ 135.80

‘

in sturdy sheet steel case ‘

175 x 175 x 30 mm, 6 pieces ‘

Code ‘

96 83 81 63 ‘

No 1054TX No 2054TX ‘

83 81 20 81

Empty tray

a sizes T30; T50; T55; T60 1/2'' a sizes T40; T45 1/2''

4.10

‘

123

12.5

Sockets, Socket sets 1054TX/4Pc

1/2''

n Set: Screwdriver sockets

ISO DIN 1174-1 3120

o Set: Screwdriver sockets

54TXB/9 ®

for inside TORX screws, tamper proof, with hollow point (TORX® TAMPER RESISTANT). 9 pieces Content: T20; T25; T27; T30; T40; T45; T50; T55; T60

for inside TORX screws, in plastic wallet, 4 pieces, Content: T40; T45; T50; T55

‘

Code

R g

527

‘

96 03 13 01

€ 71.60

‘

1054KKTX*

Code

n Screwdriver sockets

R g

811

‘

96 03 10 07

€ 122.20

‘

for inside TORX® screws, with ball point, swivel angle up to 20° each side, extra long, Chrome Alloy Steel, chrome plated.

in carton packing with transparent cover ‘

54TXB/10

o Set: Screwdriver sockets

for inside TORX® screws, tamper proof, with hollow point (TORX® TAMPER RESISTANT). 10 pieces Content: T20; T25; T27; T30; 2 x T40; T45; T50; T55; T60 ‘

Code

size

C mm

L1 L2 mm mm

d mm

R g

T30 T40 T45 T50

5.5 6.6 7.8 8.8

120 82 140 102 140 102 140 102

22.7 99 22.7 105 22.7 105 22.7 143

‘

03 20 00 30 03 20 00 40 03 20 00 45 03 20 00 50

S 5 5 5 5

€ 17.00 17.30 17.70 18.60

‘

Code

R g

1288

‘

96 03 10 08

€ 150.70

‘

in sturdy sheet steel box ‘

* to be discontinued ‘

50CL

o Screwdriver sockets

54TXB

Clip strips

for socket retention, with 9 or 11 retaining clips. Supplied without sockets.

for inside TORX® screws, tamper proof, with hollow point, Chrome Alloy Steel, chrome plated (TORX® TAMPER RESISTANT).

‘

Code

size

C mm

L1 L2 mm mm

d mm

R g

T20 T25 T27 T30 T40 T45 T50 T55 T60

3.8 4.4 5 5.5 6.6 7.8 8.8 11.2 13.2

55 55 55 55 55 55 55 58 58

22.7 70 22.7 70 22.7 71 22.7 71 22.7 71 22.7 73 22.7 86 23.7 111 23.7 113

‘

03 11 00 20 03 11 00 25 03 11 00 27 03 11 00 30 03 11 00 40 03 11 00 45 03 11 00 50 03 11 00 55 03 11 00 60 1

17 17 17 17 17 17 17 18 18

S 5 5 5 5 5 5 5 5 5

€ 12.40 12.20 12.20 12.20 12.60 12.60 13.50 14.50 17.00

‘

Application: size T50 for the spare wheel retaining plate on the bumper of the Opel Frontera Sport ‘

124

‘

Code

size

L mm

R g

1 2

200 300

54 73

5 5

‘

80 50 00 01 80 50 00 02 ‘

€ 5.40 5.40

12.5

1/2''

ISO DIN 1174-1 3120

517

Drive tools and accessories 1/2'' u, finish: Chrome Alloy Steel, chrome plated.

512

Ratchet

Code

reversible, 36 teeth, with 2-component handle, DIN 3122/ISO 3315.

13 26 00 01

b mm

a mm

R g

415

798

€ 78.00

‘

522

L mm

b mm

a mm

R g

265.5

610

‘

13 11 10 10

L mm

‘

Code

Flexible joint ratchet

€

Ratchet adaptor

reversible, 20 teeth.

57.00

‘

512G

Ratchet

‘

Code 13 14 00 00

reversible, 36 teeth, with 2-component handle, DIN 3122/ISO 3315. Encapsulated housing minimises the ingress of dirt. L mm

b mm

a mm

R g

265,5

610

‘

13 11 11 10

O mm

R g

67,5

316

532 €

63.50

Ratchet

long handle, reversible, 36 teeth, with 2-component handle. ‘

‘

Code

L mm

b mm

a mm

R g

380

821

‘

512QR

€ 123.00

‘

Code

L mm

‘

QuickRelease ratchet

13 12 10 10

€ 78.50

‘

Ü ü

‘

Code

L mm

b mm

a mm

R g

265,5

599

‘

13 11 00 20

€ 61.00

long handle, reversible, 36 teeth, with 2-component handle. Encapsulated housing minimises the ingress of dirt. ‘

‘

512SG-QR

Code

QuickRelease ratchet

b mm

a mm

R g

13 12 11 10

380

821

5120 + 7210/15

L mm

b mm

a mm

R g

265,5

680

‘

€ 64.50

‘

Spare parts set for ratchets No 512, 512SG, 532, 538

‘

Code

R g

127

‘

515

19 04 00 00

Ratchet, fine tooth

€ 25.80

‘

for ratchets from 1990

reversible, 60 teeth, with 2-component handle, for use in confined spaces, re-engages after movement of 6°, DIN 3122/ISO 3315.

‘

5120QR

L mm

b mm

a mm

R g

265

26,2

502

‘

Spare parts set for ratchets No 512, 512SG-QR

Ü ü

‘

13 23 10 11

84.50

Content: 1 pinion; 1 pawl; 1 lever with pin; 1 ball; 2 compression springs; 2 screws.

‘

Code

€

‘

reversible, 36 teeth, with QuickRelease safety lock and steel handle, DIN 3122/ISO 3315.

13 11 00 30

L mm

‘

Ü ü

Code

Ratchet

532G

reversible, 36 teeth, with QuickRelease safety lock and 2-component handle, DIN 3122/ISO 3315.

€

Content: 1 pinion; 1 pawl; 1 lever with pin; 1 ball; 2 compression springs; 2 screws.

46.10

‘ ‘

Code

R g

127

‘

19 04 00 20

€ 28.60

‘

125

12.5

Sockets, Socket sets 7350/20

1/2''

Spare parts set for ratchets No 515, 517

506QR

ISO DIN 1174-1 3120

QuickRelease sliding T-handle

Ü ü

Content: 1 pinion; 1 pawl; 1 switching disk; 1 spring; 3 screws.

with QuickRelease safety lock.

‘

R g

Code ‘

59 25 10 20

146

€ 28.70

‘

Code

L mm

R g

300

470

‘

13 07 10 00

€ 19.10

‘

for ratchets from 4/96 ‘

509 501

Speeder brace

Extensions

DIN 3123/ISO 3316.

working radius 105 mm, DIN 3122/ISO 3315.

‘

Code

L mm

R g

456

615

‘

13 10 00 10

€ 37.30

‘

Code

size

L mm

d mm

R g

2 3 5 10

52 75 130 255

23 23.2 23.2 23.2

88 120 191 341

5 5 5 5

‘

501B

13 01 00 01 13 01 00 04 13 01 00 02 13 01 00 03

Speeder brace

with steel handle, for greater axial power transmission, detachable palm head, working radius 105 mm, DIN 3122/ISO 3315.

€ 9.00 9.60 9.90 13.20

‘

509W

Extensions with wobble-drive

swivel angle 15° each side, maximum torque 200 N m.

‘

Code

L mm

R g

456

886

‘

13 10 00 02

€ 88.00

‘

504

Flexible handle

DIN 3122/ISO 3315, with 2-component handle.

‘

Code

‘

Code

size

L mm

R g

15 18

397 469

674 770

1 1

‘

13 06 10 12 13 06 10 13

€ 43.60 64.50

‘

5040

size

L mm

d mm

R g

2 3 5 10

52 75 130 255

23 23.2 23.2 23.2

80 120 191 341

5 5 5 5

‘

13 01 00 05 13 01 00 06 13 01 00 07 13 01 00 08

€ 11.10 11.90 13.70 16.90

‘

509QR

Spare parts set for No 504

QuickRelease extensions

Ü ü

Content: 1 Universal Joint 1 Screw 1 Spring Washer

DIN 3123/ISO 3316.

‘

Code

R g

‘

96 19 08 00

€ 19.10

‘

size

L mm

d mm

R g

2 3 5 10

52 75 130 255

23 23 23 23

90 123 187 341

1 1 1 1

‘

506

Code

Sliding T-handle

‘

13 01 10 01 13 01 10 04 13 01 10 02 13 01 10 03

DIN 3122/ISO 3315.

‘ ‘

Code

L mm

R g

300

436

‘

13 07 00 00 ‘

126

€ 16.60

€ 10.40 11.00 11.50 15.00

12.5

1/2''

ISO DIN 1174-1 3120

3505

Special extension

7789-1

Adaptor

Q 1/2''

socket x 1'' plug (12.5 x 25 mm), HPQ high performance steel.

‘

Code

L mm

d mm

R g

120

23.2

186

‘

13 21 00 01

€ 21.90

‘

Code

L mm

d mm

R g

36.5

175

‘

510

58 52 20 89

Universal joint

€ 23.00

‘

DIN 3123/ISO 3316.

409M/432M Set adaptors, 3 pieces /514M/3 1/4''

socket x 3/8'' plug, socket x 1/2'' plug, 1/2'' socket x 3/4'' plug. 3/8''

‘

Code

L mm

d mm

R g

146

‘

13 02 00 00

€

23.90

‘

510QR

QuickRelease universal joint Code

Ü ü

R g

120

‘

96 12 10 02

DIN 3123/ISO 3316, with QuickRelease safety lock.

€ 53.80

‘

514M

Adaptor

1/2''

socket x 3/4'' plug (12.5 x 20 mm).

‘

Code

L mm

d mm

R g

157

‘

13 02 10 00

€ 27.50

‘

513

Code

Adaptor

13 03 00 10

543

socket x 3/8'' plug (12.5 x 10), maximum torque 202 N m, DIN 3123/ISO 3316, HPQ high performance steel. L mm

d mm

R g

22.7

‘

€ 9.30

‘

514

€ 22.10

Bit holder

L mm

d mm

R g

‘

13 18 00 10

€ 20.50

‘

socket x 3/4'' plug (12.5 x 20), DIN 3123/ISO 3316, HPQ high performance steel.

52/9/3

‘

L mm

d mm

R g

118

‘

1/2''

13 03 00 05

c inside hexagon, DIN 3126/ISO 1173 D 8. Internal hex drive with a collar-thrust spring (registered design). Bits are easy to insert, lock securely in position and can be removed just as easily; even hex bits with a wide groove (Type E, DIN 3126/ISO 1173). Code

Adaptor

Code

R g

5/16''

‘

13 03 00 02

O mm

‘

1/2''

Code

L mm

‘

€ 11.70

Socket set 1/2'' u

in sturdy sheet steel case, 12 pieces Content: 9 sockets with hexagon No 52: sizes 10; 13; 16; 17; 18; 19; 21; 22; 24 mm 1 ratchet No 512 2 extensions No 509/5 (130 mm), No 509/10 (255 mm) ‘

Code

R g

‘

96 03 03 43

2900

€ 177.90

‘

127

12.5

Sockets, Socket sets 50/12/3

1/2''

Socket set 1/2'' u

50/16/6

‘

R g

‘

96 03 04 35

3750

Socket set 1/2'' u

in sturdy sheet steel case, 22 pieces Content: 16 sockets with bi-hexagon No 50: sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24; 27; 30; 32 mm 1 ratchet No 512 3 extensions No 509/3 (75 mm), No 509/5 (130 mm), No 509/10 (255 mm) 1 T-handle No 506 1 universal joint No 510

in sturdy sheet steel case, 15 pieces Content: 12 sockets with bi-hexagon No 50: sizes 10; 13; 16; 17; 18; 19; 21; 22; 24; 27; 30; 32 mm 1 ratchet No 512 2 extensions No 509/5 (130 mm), No 509/10 (255 mm)

Code

€ 209.80

‘

R g

Code ‘

52/12/3

96 03 04 47

Socket set 1/2'' u

52/16/6

‘

R g

‘

96 03 04 36

4957

€ 283.05

‘

in sturdy sheet steel case, 15 pieces Content: 12 sockets with hexagon No 52: sizes 10; 13; 16; 17; 18; 19; 21; 22; 24; 27; 30; 32 mm 1 ratchet No 512 2 extensions No 509/5 (130 mm), No 509/10 (255 mm)

Code

ISO DIN 1174-1 3120

3715

€

Socket set 1/2'' u

in sturdy sheet steel case, 22 pieces Content: 16 sockets with hexagon No 52: sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24; 27; 30; 32 mm 1 ratchet No 512 3 extensions No 509/3 (75 mm), No 509/5 (130 mm), No 509/10 (255 mm) 1 T-handle No 506 1 universal joint No 510

208.00

‘ ‘

54/8/4

Socket set 1/2'' u

‘

96 03 04 48

in sturdy sheet steel case, 12 pieces Content: 8 INHEX sockets No 54: sizes 4; 5; 6; 8; 10; 12; 14; 17 mm 1 ratchet No 512 2 extensions No 509/5 (130 mm), No 509/10 (255 mm) 1 T-handle No 506

52/16/6QR

R g 3833

€ 215.60

‘

52/16/5

Socket set 1/2'' u

in sturdy sheet steel case, 21 pieces Content: 15 sockets with hexagon No 52: sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24; 27; 30 mm 1 socket, long, with rubber insert No 51: sizes 16 mm - 5/8'' 1 ratchet No 512 2 extensions No 509/5 (130 mm), No 509/10 (255 mm) 1 T-handle No 506 1 universal joint No 510 R g

‘

96 03 04 06 ‘

128

Socket set 1/2''

4765

in sturdy ABS plastic case, 22 pieces Content: 16 sockets with hexagon No 52: sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24; 27; 30; 32 mm 1 ratchet No 512QR 3 extensions No 509QR/3 (75 mm), No 509QR/5 (130 mm), No 509QR/10 (255 mm) 1 T-handle No 506QR 1 universal joint No 510QR ‘

Code

R g

‘

96 03 04 80 ‘

‘

Code

€ 280.85

Ü ü

‘

96 03 05 01

4940

‘

Code

R g

Code

€ 278.65

4243

€ 293.85

12.5

1/2''

ISO DIN 1174-1 3120

50/22/6

Socket set 1/2'' u

40/52/27/11 Socket set 1/4''; 1/2'' u

in sturdy sheet steel case, 28 pieces Content: 22 sockets with bi-hexagon No 50: sizes 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 23; 24; 26; 27; 28; 30; 32 mm 1 ratchet No 512 3 extensions No 509/3 (75 mm), No 509/5 (130 mm), No 509/10 (255 mm) 1 T-handle No 506 1 universal joint No 510 ‘

R g

Code ‘

96 03 04 07

5540

€ 336.40

‘

52/22/6

Socket set 1/2'' u

Code

in sturdy sheet steel case, 28 pieces Content: 22 sockets with hexagon No 52: sizes 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 23; 24; 26; 27; 28; 30; 32 mm 1 ratchet No 512 3 extensions No 509/3 (75 mm), No 509/5 (130 mm), No 509/10 (255 mm) 1 T-handle No 506 1 universal joint No 510

96 01 01 60

R g

‘

96 03 04 09

5600

5275

€ 439.20

‘

50/54/25/6 Socket set 1/2'' u

‘

Code

R g

‘

€ 333.45

in sturdy sheet steel case, 31 pieces Content: 17 sockets with bi-hexagon No 50: sizes 8; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24; 27; 30; 32 mm 8 INHEX sockets No 54: sizes 4; 5; 6; 7; 8; 10; 12; 14 mm 1 ratchet No 512 3 extensions No 509/3 (75 mm), No 509/5 (130 mm), No 509/10 (255 mm) 1 T-handle No 506 1 universal joint No 510

‘

50ma/39/6N Socket set 1/2'' u

Code

in sturdy sheet steel case, 45 pieces Content: 39 sockets with bi-hexagon No 50: sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 23; 24; 25; 26; 27; 28; 30; 32; 34 mm No 50a: sizes 3/8; 7/16; 1/2; 9/16; 19/32; 5/8; 11/16; 3/4; 25/32; 13/16; 7/8; 15/16; 1; 1 1/16; 1 1/8; 1 3/16; 1 1/4'' 1 ratchet No 512 3 extensions No 509/3 (75 mm), No 509/5 (130 mm), No 509/10 (255 mm) 1 T-handle No 506 1 universal joint No 510 ‘

Code

R g

‘

96 03 01 40

8560

€

R g

‘

96 03 04 39

6090

€ 382.90

‘

52/54/25/6 Socket set 1/2'' u in sturdy sheet steel case, 31 pieces Content: 17 sockets with hexagon No 52: sizes 8; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24; 27; 30; 32 mm 8 INHEX sockets No 54: sizes 4; 5; 6; 7; 8; 10; 12; 14 mm 1 ratchet No 512 3 extensions No 509/3 (75 mm), No 509/5 (130 mm), No 509/10 (255 mm) 1 T-handle No 506 1 universal joint No 510

511.45

‘ ‘

Code

R g

‘

96 03 02 39

6106

€ 380.30

‘

129

12.5

Sockets, Socket sets 50/43/7

1/2''

Socket set 1/2'' u

876N

in sturdy sheet steel case, 50 pieces Content: 23 sockets with bi-hexagon No 50: sizes 8; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 23; 24; 25; 26; 27; 28; 30; 32; 34 mm 7 sockets, long, No 51: sizes 13; 17; 18; 19; 22; 24; 27 mm 2 sockets, long, with rubber insert No 51: sizes 16 mm - 5/8'', 20.8 mm - 13/16'' 6 UNIFLEX sockets with hexagon No 53: sizes 10; 13; 16; 17; 18; 19 mm 5 INHEX sockets No 54: sizes 4; 5; 6; 8; 10 mm 1 ratchet No 512 3 extensions No 509/3 (75 mm), No 509/5 (130 mm), No 509/10 (255 mm) 1 flexible handle No 504/15 1 T-handle No 506 1 universal joint No 510

ISO DIN 1174-1 3120

Socket set 1/2'' u

in sturdy sheet steel case, 47 pieces Content: 19 sockets with hexagon No 52: sizes 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24; 27; 30; 32; 34 mm 2 sockets, long, with rubber insert, No 51: sizes 16 mm - 5/8''; 20.8 mm - 13/16'' 7 INHEX sockets No 54: sizes 4; 5; 6; 7; 8; 10; 12 mm 13 combination spanners No 13: sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24 mm 1 ratchet No 512 3 extensions No 509/3 (75 mm), No 509/5 (130 mm), No 509/10 (255 mm) 1 T-handle No 506 1 universal joint No 510 ‘

‘

R g

Code ‘

96 03 01 36

10710

€ 825.95

Code

R g

‘

96 03 03 01

8240

€ 583.85

‘

87N

Socket set

1/2''

50TX/16/5

in sturdy sheet steel case, 21 pieces Content: 7 sockets for external TORX® screws No 50TX: sizes E10; E12; E14; E16; E18; E20; E24 9 screwdriver sockets for internal TORX® screws No 54TX: sizes T20; T25; T27; T30; T40; T45; T50; T55; T60 1 ratchet No 512 3 extensions No 509/2 (52 mm), No 509/5 (130 mm), No 509/10 (255 mm) 1 universal joint No 510

in sturdy sheet steel case, 47 pieces Content: 19 sockets with bi-hexagon No 50: sizes 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24; 27; 30; 32; 34 mm 2 sockets, long, with rubber insert, No 51: sizes 16 mm - 5/8''; 20.8 mm - 13/16'' 7 INHEX sockets No 54: sizes 4; 5; 6; 7; 8; 10; 12 mm 13 combination spanners No 13: sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24 mm 1 ratchet No 512 3 extensions No 509/3 (75 mm), No 509/5 (130 mm), No 509/10 (255 mm) 1 T-handle No 506 1 universal joint No 510

‘

Code 96 03 27 02

R g

96 03 01 01 ‘

8265

4315

€ 323.20

‘

876TX ‘

R g

‘

Code

Socket set TORX® 1/2'' u

€ 589.40

Socket set TORX® 1/2'' u

in sturdy sheet steel case, 39 pieces Content: 12 sockets with hexagon No 52: sizes 8; 10; 13; 16; 17; 18; 19; 21; 22; 24; 27; 30 mm 6 INHEX sockets No 54: sizes 5; 6; 8; 10; 12; 14 mm 7 sockets for external TORX® screws No 50TX: sizes E10; E12; E14; E16; E18; E20; E24 9 screwdriver sockets for internal TORX® screws No 54TX: sizes T20; T25; T27; T30; T40; T45; T50; T55; T60 1 ratchet No 512 2 extensions No 509/5 (130 mm), No 509/10 (255 mm) 1 T-handle No 506 1 universal joint No 510 ‘

Code

R g

‘

98 81 09 09 ‘

130

7203

€ 493.85

12.5

1/2''

ISO DIN 1174-1 3120

89TX

Socket set TORX® 1/4; 3/8; 1/2'' u

50a/17/6

in sturdy sheet steel case, 23 pieces Content: 17 sockets with bi-hexagon No 50a: sizes 3/8; 7/16; 1/2; 9/16; 19/32; 5/8; 11/16; 3/4; 25/32; 13/16; 7/8; 15/16; 1; 1 1/16; 1 1/8; 1 3/16; 1 1/4'' 1 ratchet No 512 3 extensions No 509/2 (52 mm), No 509/5 (130 mm), No 509/10 (255 mm) 1 T-handle No 506 1 universal joint No 510

‘

Code

‘

96 03 41 25

98 81 09 08

2765

339.00

Socket set TORX® 1/4; 1/2'' u

‘

96 01 27 02 ‘

7045

R g

Code ‘

96 03 01 40

8560

€ 511.45

‘

87aN

‘

Code

€ 305.95

50ma/39/6N Socket set 1/2'' u

‘

86TX

5145

‘

€

‘

R g

Code

‘

R g

Socket set 1/2'' u

€ 679.20

Socket set 1/2'' u

in sturdy sheet steel case, 40 pieces Content: 15 sockets with bi-hexagon No 50a: sizes 3/8; 7/16; 1/2; 9/16; 5/8; 11/16; 3/4; 13/16; 7/8; 15/16; 1; 1 1/16; 1 1/8; 1 3/16; 1 1/4'' 2 sockets, long, with rubber insert, No 51: sizes 16 mm - 5/8''; 20.8 mm - 13/16'' 5 INHEX sockets No 54a: sizes 7/32; 1/4; 5/16; 3/8; 1/2 '' 12 combination spanners No 13a: sizes 1/4; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16; 5/8; 11/16; 3/4; 13/16; 7/8'' 1 ratchet No 512 3 extensions No 509/2 (52 mm), No 509/5 (130 mm), No 509/10 (255 mm) 1 T-handle No 506 1 universal joint No 510 ‘

Code

R g

‘

96 03 41 01

7947

€ 534.05

‘

131

12.5

Sockets, Socket sets

1/2''

ES 1/2''-512/6

ISO DIN 1174-1 3120

TCS 50/52/30/6 MF

x ö 175 x 350 x 35 mm, 6 pieces ‘

R g

Code ‘

96 83 81 13

1915

€ 137.75

‘

No 506

1/2''

D 300 mm

No 509/2

1/2''

D a 52 mm

No 509/5

1/2''

D a 130 mm

No 509/10

1/2''

D a 255 mm

No 510

1/2''

D a 71 mm

No 512

1/2''

‘

83 81 20 29

350 x 350 x 70 mm, 36 pieces ‘

R g

Code

€

‘

96 83 03 54

4604

399.00

‘

No 50

1/2'' a sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 30 mm

No 52

1/2'' a sizes 12; 13; 17; 18; 19; 20; 21; 22; 24; 27; 30; 32; 34 mm

No 54

1/2''

a sizes 5; 6; 7; 8; 10; 12 mm

No 506

1/2''

D 300 mm

No 509/5

1/2''

D a 130 mm

No 509/10

1/2''

D a 255 mm

No 510

1/2''

D a 71 mm

No 512

1/2''

No 513

3/8''

D 1/2'' a

‘

Empty tray

110

8.15

‘ ‘

TCS 1/2''-512/6

‘

x ö

‘

175 x 350 x 35 mm, 6 pieces

‘

R g

Code ‘

96 83 81 75

1845

‘

€ 148.20

‘

No 506

1/2''

D 300 mm

No 509/2

1/2''

D a 52 mm

No 509/5

1/2''

D a 130 mm

No 509/10

1/2''

D a 255 mm

No 510

1/2''

D a 71 mm

No 512

1/2''

‘

Tool Control System The safety inlay system

TCS 1/2''-512/9

x ö

Designed to fit our Tool Trolleys and Tool Boxes With yellow signal cut-outs to show whether all tools are in their places

175 x 350 x 40 mm, 9 pieces ‘

R g

Code ‘

96 83 06 03

2364

‘

No 506

1/2''

D 300 mm

No 509QR/2

1/2''

D a 52 mm

No 509/5

1/2''

D a 130 mm

No 509QR/10

1/2''

D a 255 mm (2x)

No 510

1/2''

D a 71 mm

No 512

1/2''

No 513

3/8''

D 1/2'' a

No 514

3/4''

D 1/2'' a

‘

132

€ 187.40

3/4''

ISO DIN 1174-1 3120

c Sockets

P Q

DIN 3124/ISO 2725-1, ASME B 107.5 M, AS-drive and HPQ high performance steel up to size 38, chrome plated.

DIN 3124/ISO 2725-1, ASME B 107.5 M, extra deep, AS-drive and HPQ high performance steel up to size 36, chrome plated.

‘

Code

A d1 d2 d3 L t1 t2 mm mm mm mm mm mm mm

‘

05 01 00 19 05 01 00 21 05 01 00 22 05 01 00 23 05 01 00 24 05 01 00 27 05 01 00 30 05 01 00 32 05 01 00 33 05 01 00 34 05 01 00 36 05 01 00 38 05 01 00 41 05 01 00 46 05 01 00 50 05 01 00 55 05 01 00 60 1

19 21 22 23* 24 27 30 32 33 34 36 38 41 46 50 55 60

28.5 31 32 33.5 34 38.5 42 44.5 46 47 49.5 52 55.5 61 66 72 78

34.7 34.7 34.7 34.7 34.7 38 38 38 40 40 40 40 40 40 40 45 45

17 18 19 20 21 24 27 29 30 31 33 35 33 33 33 33 33

50 50 51 51 51 54 58 58 60 60 60 64 67 73 80 80 80

16 16 17 17 18.5 20 21 22 22 24 24 30 30 34 34 36 40

R g S

26 183 26 226 25.2 199 24.9 206 24.6 200 26.8 263 33.6 313 33 326 34.7 372 34.4 363 33.9 386 37.3 429 37.5 498 43.5 605 48.5 769 49.5 954 50.5 1025

5 5 5 5 5 5 5 2 2 2 2 2 2 1 1 1 1

€ 10.50 11.60 10.50 12.60 11.30 12.90 15.70 16.90 20.10 17.70 17.10 19.90 27.00 28.80 34.00 46.90 59.00

Code

A d1 d2 d3 L t1 t2 mm mm mm mm mm mm mm

R g S

22 24 27 30 32 34 36 41

374 341 443 477 526 562 620 714

‘

05 02 00 22 05 02 00 24 05 02 00 27 05 02 00 30 05 02 00 32 05 02 00 34 05 02 00 36 05 02 00 41 1

32 34 38.5 42 44.5 47 49.5 55.5

34.7 34.7 38 38 38 40 40 40

19 21 24 27 29 31 33 38

90 90 90 90 90 90 90 90

40 40 40 40 40 40 40 40

64.2 63.6 62.8 65.6 65 64.4 63.9 58.5

5 5 5 5 2 2 2 2

€ 28.10 26.40 29.10 32.60 34.50 36.40 40.00 49.10

‘

i INHEX sockets

for socket head screws, DIN 7422, Chrome Alloy Steel, chrome plated.

‘

* to be discontinued

‘

Code

d Sockets

55a

B mm

L1 mm

L2 mm

d mm

R g

14 17 19 22

80 80 80 80

25 25 25 25

34.7 34.7 34.7 40

272 311 346 515

1 1 1 1

‘

P Q

SAE AS 954-E (test loads), ASME B 107.1, AS-drive and HPQ high performance steel up to size 1 1/2'', chrome plated.

05 05 00 14 05 05 00 17 05 05 00 19 05 05 00 22

€ 33.90 33.90 34.80 36.50

‘

m Screwdriver sockets

59X

for trisquare socket head screws (XZN®), Chrome Alloy Steel, chrome plated.

‘

Code

A ''

d1 mm

d2 mm

d3 mm

L mm

t1 t2 mm mm

R g S

28.5 31 33 34 1 37 1 1/16 38.5 1 1/8 41 1 1/4 44.5 1 5/16 46.5 1 3/8 48.5 1 7/16 50 1 1/2 52 1 5/8 56 1 11/16 58 1 3/4 59.5 1 13/16 61.5 1 7/8 63.5 2 67

34.7 34.7 34.7 34.7 38 38 38 38 40 40 40 40.5 40 40 40 40 40 40

18.6 19.4 21 22.5 24 26 27.5 30.5 32.1 33.7 35.3 36.8 33 33 33 33 33 33

50 51 51 51 52 54 57 58 59 59 60 64 67 70 70 73 76 80

16 16.5 18 18.5 20 20 20 22 24 24 27 30 30 32 32 34 34 34

176 190 240 248 251 265 297 339 368 375 395 415 469 524 524 585 651 757

‘

05 41 00 40 05 41 00 42 05 41 00 44 05 41 00 46 05 41 00 48 05 41 00 50 05 41 00 52 05 41 00 56 05 41 00 58 05 41 00 60 05 41 00 62 05 41 00 64 05 41 00 66 05 41 00 67 05 41 00 68 05 41 00 69 05 41 00 70 05 41 00 72 1

3/4 13/16 7/8 15/16

26 25.1 24.5 24.2 24.8 26.2 32.5 32.6 33.1 32.7 33.2 36.8 37.5 40.5 40.5 43.5 45 48.5

2 2 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1

€ 13.20 15.00 13.60 13.60 14.10 15.50 18.60 19.20 20.70 20.70 22.50 21.40 31.30 31.40 31.30 33.40 34.70 38.20

‘

Code

size

L1 mm

L2 mm

d mm

R g

M14 M16 M18

90 80 100

35 25 45

34.7 34.7 34.7

281 302 310

1 1 1

‘

05 06 00 14 05 06 00 16 05 06 00 18

€ 31.40 32.70 36.90

‘

Application: Flywheel and oscillation damper on Mercedes-Benz commercial vehicles ‘

‘

133

Sockets, Socket sets

3/4''

n Screwdriver sockets

59TX

556

for inside TORX screws, Chrome Alloy Steel, chrome plated.

ISO DIN 1174-1 3120

Sliding head

without Bar handle No 558.

‘

Code

L mm

d mm

R g

61.5

318

L mm

d mm

R g

510

1299

‘

Code

size

C mm

L1 mm

L2 mm

d mm

R g

T60 T70 T80 T90 T100

13.2 15.5 17.6 19.9 22.1

80 80 80 80 80

25 25 25 25 25

34.7 34.7 34.7 34.7 40

265 285 300 331 474

1 1 1 1 1

‘

05 10 00 60 05 10 00 70 05 10 00 80 05 10 00 90 05 10 01 00 1

15 07 00 00 € 35.60 37.90 39.50 42.50 44.60

‘

558

Bar handle

‘

Code

Application: size T80 for MAN series M, size T100 for MAN series F

€ 20.30

‘

€

‘

15 17 00 00

24.20

‘

559

Extensions

DIN 3123/ISO 3316.

Drive tools and accessories 3/4'' u, finish: Chrome Alloy Steel, chrome plated.

‘

552

Ratchet

Code

size

L mm

d mm

R g

4 8 16

95 200 400

35 35 35

369 696 1389

5 5 5

L mm

d mm

R g

109

566

‘

Ü ü

15 01 00 03 15 01 00 01 15 01 00 02

reversible, 36 teeth, with QuickRelease safety lock, without Bar handle No 558.

€ 21.90 23.60 40.50

‘

561

Universal joint

DIN 3123/ISO 3316. ‘

Code

L mm

b mm

a mm

R g

165

1684

‘

15 11 00 00

€ 120.00

‘

5520

Code

Spare parts set for ratchet No 552

‘

15 02 00 00 ‘

Content: 1 pinion, 1 pawl, 1 lever, 1 ball, 1 compression spring, 2 screws

568

‘

Code

R g

507

‘

19 05 00 00

€ 59.55

‘

563

€ 76.50

Ratchet adaptor

Adaptor

Q 3/4''

socket x 1/2'' plug (20 x 12.5), maximum torque 512 N m, DIN 3123/ISO 3316, HPQ high performance steel.

‘

reversible, 44 teeth.

Code

L mm

d mm

R g

34.7

203

‘

15 03 00 03

€ 23.10

‘

Code

L mm

O mm

R g

105.5

1257

‘

15 14 00 00

€ 245.00

‘

569

Adaptor

Q 3/4''

554

inside x 1'' plug (20 x 25), DIN 3123/ISO 3316, HPQ high performance steel.

Flexible head

Ü ü

‘

with QuickRelease safety lock, without Bar handle No 558.

Code 15 03 00 06 ‘

‘

Code

L mm

d mm

R g

132

612

‘

15 06 00 00 ‘

134

L mm

d mm

R g

34.7

295

‘

€ 45.00

€ 24.20

3/4''

ISO DIN 1174-1 3120

55/10/6

Socket set 3/4'' u

55a/16/6

in sturdy sheet steel case, 16 pieces Content: 10 sockets with hexagon No 55: sizes 22; 24; 27; 30; 32; 34; 36; 41; 46; 50 mm 1 ratchet No 552 2 extensions No 559/8 (200 mm), No 559/16 (400 mm) 1 flexible head No 554 1 sliding head for T-handle No 556 1 bar handle No 558

Socket set 3/4'' u

in sturdy sheet steel case, 22 pieces Content: 16 sockets with bi-hexagon No 55a: sizes 7/8; 15/16; 1; 1 1/16; 1 1/8; 1 1/4; 1 5/16; 1 3/8; 1 7/16; 1 1/2; 1 5/8; 1 11/16; 1 3/4; 1 13/16; 1 7/8; 2'' 1 ratchet No 552 2 extensions No 559/8 (200 mm), No 559/16 (400 mm) 1 flexible head No 554 1 sliding head for T-handle No 556 1 bar handle No 558

‘

R g

Code ‘

96 05 01 04

13965

‘

€ 538.50

‘

R g

Code

€

‘

96 05 41 03

16750

726.80

‘

55/9/6N

Socket set

3/4''

ES 55/6/4

in sturdy sheet steel case, 15 pieces Content: 9 sockets with hexagon No 55: sizes 32; 34; 36; 38; 41; 46; 50; 55; 60 mm 1 ratchet No 552 2 extensions No 559/8 (200 mm), No 559/16 (400 mm) 1 flexible head No 554 1 sliding head for T-handle No 556 1 bar handle No 558

530 x 350 x 83 mm, 10 pieces ‘

R g

Code ‘

96 83 81 74

‘

R g

Code ‘

7875

15731

613.90

‘

No 55

3/4''

a sizes 34; 36; 41; 46; 50; 55 mm

No 552

3/4''

No 556

3/4''

No 558

510 mm

No 559/8

3/4''

‘

55a/10/5

383.00

‘

€ ‘

96 05 01 03

€

Socket set 3/4'' u

‘

in sturdy sheet steel case, 15 pieces Content: 10 sockets with bi-hexagon No 55a: sizes 1 1/16; 1 1/8; 1 1/4; 1 3/8; 1 7/16; 1 1/2; 1 5/8; 1 3/4; 1 13/16; 1 7/8'' 1 ratchet No 552 2 extensions No 559/8 (200 mm), No 559/16 (400 mm) 1 sliding head for T-handle No 556 1 bar handle No 558

‘

83 81 20 89

D a 200 mm

Empty tray

298

23.40

‘

TCS 55/11/6

x ö

‘

Code

R g

‘

96 05 41 01

12620

€ 541.50

530 x 350 x 90 mm, 17 pieces ‘

‘

R g

Code ‘

96 83 02 21

10100

€ 556.00

‘

No 55

3/4'' a sizes 22; 24; 27; 30; 32; 34; 36; 38; 41; 46; 50 mm

No 552

3/4''

No 556

3/4''

No 558

510 mm

No 559/8 No 559/16

3/4'' 3/4''

D a 200 mm D a 400 mm

No 568

1/2''

D 3/4'' a

‘

135

Sockets, Socket sets d Sockets

ISO DIN 1174-1 3120

1''

Drive tools and accessories 1'' u, finish: Chrome Alloy Steel, chrome plated.

P Q

DIN 3124/ISO 2725-1, AS-drive and HPQ high performance steel up to size 36, chrome plated.

882

Ratchet

Ü ü

reversible, 36 teeth, with QuickRelease safety lock, without Bar handle No 888. ‘

Code

A mm

d1 mm

d2 mm

d3 mm

L mm

t1 t2 mm mm

R g S

30 32 34 36 41 46 50 55 60

42.5 45 47 49.5 55.5 61 66 72 78

43 43 43 48 48 48.5 48 48 48

27 29 31 33 36 40 43 49 53

65 67 67 67 70 75 80 85 90

20 24 24 24 30 32 34 36 40

371 374 398 493 520 622 707 920 992

‘

06 01 00 30 06 01 00 32 06 01 00 34 06 01 00 36 06 01 00 41 06 01 00 46 06 01 00 50 06 01 00 55 06 01 00 60 1

33.1 34.6 34 33.4 37.5 43.5 47.5 49.5 56.5

2 2 2 2 1 1 1 1 1

€ 21.20 21.30 24.50 22.60 35.50 41.60 47.80 63.00 72.50

‘

Code

L mm

b mm

a mm

R g

185

2000

‘

16 11 00 00

€ 158.00

‘

8820

Spare parts set for ratchet No 882

Content: 1 pinion, 1 pawl, 1 lever, 1 ball, 1 compression spring, 2 screws

‘ ‘

c Sockets

Code

R g

539

‘

DIN 3124, Chrome Alloy Steel, chrome plated.

19 07 00 00

€ 94.55

‘

884

Flexible head

Ü ü

with QuickRelease safety lock, without Bar handle No 888.

‘

Code

A mm

d1 mm

d2 d3 mm mm

L t1 t2 mm mm mm

‘

R g S

‘

€

Code

L mm

d mm

R g

195

1800

L mm

d mm

R g

605

L mm

d mm

R g

700

3320

‘

06 01 00 65 06 01 00 70 06 01 00 75 06 01 00 80

65 87 70 94 75 101 80 108

60 60 60 60

58 63 68 73

105 110 115 120

40 42 45 48

68.5 72.5 78.5 83.5

1917 2210 2525 2865

1 95.50 1 121.00 1 134.00 1 153.00

16 06 00 00

110.00

‘

886

‘

Sliding head

without Bar handle No 888.

i INHEX sockets

€

DIN 7422, Chrome Alloy Steel, chrome plated. ‘

Code ‘

16 07 00 00

€ 35.30

‘

888

Bar handle

‘

Code

B mm

L1 mm

L2 mm

d mm

R g

14 17 19 22 24 27

85 85 85 90 90 90

25 25 25 25 25 25

43 43 43 48 48 49

390 417 445 661 719 827

1 1 1 1 1 1

‘

06 05 00 14 06 05 00 17 06 05 00 19 06 05 00 22 06 05 00 24 06 05 00 27 1

‘

136

€ ‘

55.50 55.50 54.50 59.00 60.00 59.00

Code ‘

16 17 00 00 ‘

€ 41.10

1''

ISO DIN 1174-1 3120

859

Extensions

60/6/6/882 Socket set 1''

DIN 3123/ISO 3316.

‘

Code

size

L mm

d mm

R g

8 16

200 410

43 43

965 1780

2 2

‘

16 01 00 01 16 01 00 02

€ 52.00 69.50

in sturdy sheet steel case, 12 pieces Content: 6 sockets with bi-hexagon No 60: sizes 36; 41; 46; 50; 55; 60 mm 1 ratchet No 882 2 extensions No 859/8 (200 mm), No 859/16 (410 mm) 1 flexible head No 884 1 sliding head for T-handle No 886 1 bar handle No 888

‘ ‘

866

Adaptor

Code

R g

‘

96 06 01 01

60/8/6/882 Socket set 1'' u

‘

L mm

d mm

R g

332

‘

16 03 00 05 ‘

€ 834.40

‘

3/4''

1'' socket x plug (25 x 20), maximum torque 1412 N m, DIN 3123/ISO 3316, HPQ high performance steel.

Code

27800

€ 31.70

in sturdy sheet steel case, 14 pieces Content: 4 sockets with bi-hexagon No 60: sizes 46; 50; 55; 60 mm 4 sockets with hexagon No 60: sizes 65; 70; 75; 80 mm 1 ratchet No 882 2 extensions No 859/8 (200 mm), No 859/16 (410 mm) 1 flexible head No 884 1 sliding head for T-handle No 886 1 bar handle No 888

‘

Code

R g

‘

96 06 01 03

30000

€ 1306.30

‘

137

Empty boxes and trays Set No

Box No

Box Code

€

Tray Code

€

40/9/4, 40D/9/4 40/13/6

40/9N

220x130x42

81 25 00 19

14.60

83 01 10 12

3.00

40/9N

220x130x42

81 25 00 19

14.60

83 01 10 80

3.00

40/13/6QR

40/9K

220x110x40

81 25 10 09

13.50

83 01 11 82

3.00

40/44/17/5

40/9N

220x130x42

81 25 00 19

14.60

83 01 10 81

3.00

40/44/17/5QR

40/9K

220x110x40

81 25 10 09

13.50

83 02 10 84

3.00

40/23/7, 40D/23/7

45/1N

315x134x46

81 26 00 11

16.30

83 01 10 16

3.80

40/23/6N, 40D/23/6

40/9N

220x130x42

81 25 00 19

14.60

83 01 10 14

3.00

40/24/6

40/9K

220x110x40

81 25 10 09

13.50

83 01 10 82

3.70

40/24/6QR

40/9K

220x110x40

81 25 10 09

13.50

83 01 10 83

3.70

40ma/25/8

40/7N

405x178x45

81 25 00 14

23.80

83 01 10 35

5.50

40/45/36/12

40/7N

405x178x45

81 25 00 14

23.80

83 01 10 11

5.50

40/52/27/11

50/4N

446x205x54

81 27 00 34

25.00

83 01 10 04

11.40

40TX/44KTX/15/6

40/9N

220x130x42

81 25 00 19

14.60

83 01 10 07

3.10

88TX

45/1N

315x134x46

81 26 00 11

16.30

83 02 10 17

3.80

89TX

50/3N

405x178x54

81 27 00 13

26.10

83 09 10 13

5.50

86TX

50/6N

470x234x74

81 27 00 19

42.40

83 01 10 02

11.40

40a/9/4, 40aD/9/4

40/9N

220x130x42

81 25 00 19

14.60

83 01 10 13

3.00

40aD/12/7QR

40/9N

220x130x42

81 25 00 19

14.60

83 01 11 16

8.95

40aD/30/7QR

40/7N

405x178x45

81 25 00 14

23.80

83 01 11 12

5.95

40aD/8/1H

40/9K

220x110x40

81 25 10 09

13.50

83 01 11 07

4.05

4008/27/1

40/9N

220x130x42

81 25 00 19

14.60

83 18 00 01

3.90

45/11/4, 456/11/4

45/1N

315x134x46

81 26 00 11

16.30

83 02 10 13

3.80

45/14/5i, 456/14/5i

45/1N

315x134x46

81 26 00 11

16.30

83 02 10 80

3.85

45/14/5iQR

45/1K

315x115x45

81 26 10 01

14.80

83 02 10 81

3.85

45/13/5N, 456/13/5

45/1N

315x134x46

81 26 00 11

16.30

83 02 10 45

3.80

45ma/28/5

40/7N

405x178x45

81 25 00 14

23.80

83 02 10 27

5.50

45/49/19/5, 456/49/19/5

40/7N

405x178x45

81 25 00 14

23.80

83 02 10 21

5.50

89N

50/6N

470x234x74

81 27 00 19

42.40

83 02 01 18

11.20

45/41/9

50/5

530x265x50

81 27 00 05

47.00

83 02 02 02

12.10

45TX/7

–

83 06 00 15

2.25

49TX/8

–

83 06 00 14

3.05

45TX/49TX/15/5

40/7N

405x178x45

81 25 00 14

23.80

83 02 10 19

3.85

45/49/32/5TX

40/7N

405x178x45

81 25 00 14

23.80

83 02 10 09

5.60

45a/12/5

45/1N

315x134x46

81 26 00 11

16.30

83 02 10 06

3.80

45a/14/8QR

50/4N

446x205x54

81 27 00 34

25.00

83 02 10 12

10.70

45a/22/8QR

50/4N

446x205x54

81 27 00 34

25.00

83 02 11 12

10.70

45a/33/13

50/5

530x265x50

81 27 00 05

47.00

83 02 02 13

12.10

52/9/3

50/3N

405x178x54

81 27 00 13

26.10

83 03 04 25

11.20

50/12/3, 52/12/3

50/3N

405x178x54

81 27 00 13

26.10

83 03 04 12

11.20

51/8

50/1N

315x134x54

81 27 00 11

19.40

83 03 04 02

4.60

54/10

40/9N

220x130x42

81 25 00 19

14.60

83 03 14 03

4.30

138

Set No

Box No

Box Code

€

Tray Code

€

54/12 54CV/9

45/1N

315x134x46

81 26 00 11

16.30

83 03 14 09

4.20

40/9N

220x130x42

81 25 00 19

14.60

83 03 24 09

4.30

3054X/54X/8

40/9N

220x130x42

81 25 00 19

14.60

83 03 26 12

5.80

54/8/4

50/3N

405x178x54

81 27 00 13

26.10

83 03 04 13

13.50

52/16/5

50/4N

446x205x54

81 27 00 34

25.00

83 03 04 09

11.20

50/16/6, 52/16/6

50/4N

446x205x54

81 27 00 34

25.00

83 03 14 80

11.20

52/16/6QR

50/4K

440x185x55

81 27 10 04

23.10

83 03 14 81

11.20

50/22/6, 52/22/6

50/4N

446x205x54

81 27 00 34

25.00

83 03 04 07

12.60

50ma/39/6N

50/5

530x265x50

81 27 00 05

47.00

83 03 14 26

12.20

50/54/25/6, 52/54/25/6

50/6N

470x234x74

81 27 00 19

42.40

83 03 14 17

12.40

50/43/7

50/5

530x265x50

81 27 00 05

47.00

83 03 05 11

12.10

87N, 876N

50/6N

470x234x74

81 27 00 19

42.40

83 09 00 11

22.50

50TX/7

–

83 06 00 09

3.00

50TX/8

40/9N

220x130x42

81 25 00 19

83 03 24 11

4.30

54TX/9

–

83 06 00 10

3.00

54TX/10

40/9N

220x130x42

81 25 00 19

83 03 14 02

4.30

54TXB/9

–

83 06 00 10

3.00

54TXB/10

40/9N

220x130x42

81 25 00 19

14.60

83 03 14 02

4.30

50TX/16/5

50/4N

446x205x54

81 27 00 34

25.00

83 03 14 13

10.70

876TX

50/6N

470x234x74

81 27 00 19

42.40

83 09 10 11

12.10

50a/17/6

50/4N

446x205x54

81 27 00 34

25.00

83 03 04 41

11.20

87aN

50/6N

470x234x74

81 27 00 19

42.40

83 09 00 12

22.50

55/10/6

55/7

575x220x86

81 29 00 08

54.50

83 04 00 02

18.50

55/9/6N

55/7

575x220x86

81 29 00 08

54.50

83 04 00 01

18.50

55a/10/5

55/6

520x160x86

81 29 00 07

47.40

83 04 00 03

16.90

55a/16/6

55/7

575x220x86

81 29 00 08

54.50

83 04 00 04

18.50

60/6/6/882

60/1

785x173x90

81 30 00 01

85.50

–

60/8/6/882

60/2

785x200x122

81 30 00 02

112.00

–

14.60

139

Certified to DIN EN ISO 9001

After STAHLWILLE was certified, as one of the very first companies back in 1990, to DIN EN ISO 9002, our Quality Assurance System was also certified to DIN EN ISO 9001 in 1992.

Power Tools

Power tools STAHLWILLE IMPACT. Tried-and-tested components for professional use in conjunction with compressed air and electric impact screwdrivers. All the tools in the IMPACT product range have been designed for particularly heavy-duty work on a day-to-day basis. Used as additional tools in conjunction with power impact tools they feature extremely good

load-bearing capacity and very long lifetimes. It is not only the professionals in the car-repair sector who appreciate the excellent precision and reliability of IMPACT tools. The name IMPACT is a by-word in all fields of industry and the trades for leading-edge quality made by professionals for professionals. The comprehensive range of products caters for all potential fields of application.

STAHLWILLE IMPACT sockets are extraordinarily tough. Their remarkable fitting accuracy, which is due to very tight tolerances, guarantees minimum loss of force as the impact is transferred from the impact screwdriver to the socket insert and also dramatically improved durability.

STAHLWILLE IMPACT sockets are made from high-grade Chrome Alloy Steel. They are hardened in an oil bath to ensure they are normalised and non-warping, making them extremely accurate tools with very close tolerances.

No 2309K e.g. 1/2'' wheel nut socket (sizes 17; 19 and 20.8 mm) with plastic sleeves, specially for sensitive alloy wheels.

IMPACT quality is available individually or in sets Whatever else the professional might want in a tool, there is no compromising on the quality. The extensions, adaptors, joints and sockets will always fit â&#x20AC;&#x201C; perfectly. Combine them as you need them. Slot them together. Done.

No 50IMP/6/2

142

Joints: 1 Deep groove for O-ring to improve grip and 2 straight-through central bore for locking pin. 3 Bevelled edge facilitates attachment. 4 Recessed keyway adaptors with springloaded pins on the square drive, e.g. No 3116, 3216.

STAHLWILLE range of BITS – uncompromisingly attractive. Reliable screwdriver inserts and adaptors in individual sizes or as sets for power screwdrivers or manual use.

No 4008/27/1

No 1201

The bit that fits – always That is why STAHLWILLE offers such a range of BITS for flatbladed, Phillips®, POZIDRIV/SUPADRIV®, internal TORX®, internal serration, internal hex drive, TRI-WING®, TORQ-SET® screws and recessed 5-star screws with a central pin – if required, also available in sets with corresponding tightening tools e.g. anticlockwise and clockwise ratcheting bit-holder. High-grade special steel alloys and special hardening processes guarantee optimum torquing and long service lifetimes.

Slotted

Internal TORX ®

Internal serration XZN®

Internal TORX ® with hollow point

Internal hex

TRI-WING®

POZIDRIV ® SUPADRIV ®

TORQ-SET®

Phillips®

5-star with hollow point

BITS screwdriver inserts from STAHLWILLE guarantee minimum transmission losses.

STAHLWILLE BITS are also suitable for use with heavy-duty power screwdrivers.

Get a grip on it: sturdy bit-holders and ratchets etc. STAHLWILLE BITS are, of course, also suitable for manual use, e.g. in conjunction with the corresponding bit-holders, ratchets, magazine holders, switchable ratchets and TORSIOMAX torque screwdrivers.

e.g. ratchet No 415SGB with 1/4'' internal hex drive, reversible e.g. bit holder No 4007 for BITS screwdriver inserts with external 1/4'' hex

143

Power tools

1/2''

c IMPACT sockets

51IMP

IMPACT sockets and accessory tools for power drivers

DIN ISO 3121 1174-2

a-drive, for power drivers, extra deep, Chrome Alloy Steel, gunmetal finish.

1/2''

‘

Code

A mm

d1 mm

d2 mm

L mm

t mm

R g

13 15 16 17 18 19 21 22 24 27

20.8 23.5 24.8 26.2 27.5 28.8 31.3 32.5 35 38.8

25 30 30 30 30 30 30 30 30 30

85 85 85 85 85 85 85 85 85 85

68.5 68 68 68 68 67.5 66.5 66.5 66 65

222 360 338 318 309 292 291 323 335 385

5 5 5 5 5 5 5 5 5 5

‘

23 02 00 13 23 02 00 15 23 02 00 16 23 02 00 17 23 02 00 18 23 02 00 19 23 02 00 21 23 02 00 22 23 02 00 24 23 02 00 27

Thin Walled – yet exceptionally strong. All STAHLWILLE IMPACT sockets made from high quality Chrome Vanadium Steel. Heat treated and oil quenched to avoid stresses, distortions and to maintain very close tolerances. Dimensional accuracy ensures minimal power transmission losses and drastically increases durability.

c IMPACT sockets

50IMP

€ 21.20 21.20 21.20 20.40 21.20 20.40 24.10 24.20 23.50 28.00

‘

a-drive, DIN 3129/ISO 2725-2, for power drivers, Chrome Alloy Steel, gunmetal finish.

1/2''

c IMPACT sockets

2309

a-drive, for power drivers, extra deep, with reduced outside diameter, Chrome Alloy Steel, gunmetal finish.

1/2''

4 ‘

Code

A mm

d1 mm

d2 mm

L mm

t mm

R g

10 11 13 14 15 16 17 18 19 21 22 24 27

16.8 18.1 20.8 22.1 23.5 24.8 26.2 27.5 28.8 31.3 32.5 35 38.8

25 25 25 25 30 30 30 30 30 30 30 30 30

38 38 38 38 38 38 38 38 40 40 42 45 50

21.5 21.5 21.5 21.5 21.5 21 21 20.5 22.5 21.5 21.5 25 25

89 88 85 86 132 130 132 130 133 135 141 164 190

10 10 10 10 10 10 10 10 10 10 10 5 5

‘

€ ‘

23 01 00 10 23 01 00 11 23 01 00 13 23 01 00 14 23 01 00 15 23 01 00 16 23 01 00 17 23 01 00 18 23 01 00 19 23 01 00 21 23 01 00 22 23 01 00 24 23 01 00 27 1

8.90 8.90 8.90 8.90 9.40 9.65 9.60 9.65 9.20 11.10 11.10 10.80 13.50

A mm

d1 mm

d2 mm

L mm

t mm

R g

17 19 20.8 22

25.7 28.2 30.7 32

30 30 30 30

85 85 85 85

68 67.5 66.5 66.5

242 257 272 311

5 5 5 5

Code ‘

23 09 00 17 23 09 00 19 23 09 02 08 23 09 00 22

€ 25.90 25.90 29.00 29.00

‘

for wheel nuts ‘

ES 2309/4

‘

50IMP/6/2

IMPACT-Set

8 pieces Content: 6 Sockets No 50IMP: sizes 13; 17; 19; 21; 22; 24 mm 1 Extension No 509/5IMP 1 Universal Joint No 510IMP for power drivers

175 x 175 x 40 mm, 4 pieces ‘

R g

Code

€

‘

96 83 81 62

1145

113.90

‘

No 2309

a sizes 17; 19; 20.8 mm-13/16''; 22 mm

1/2''

‘

83 81 20 80 ‘

‘

Code

R g

‘

96 23 01 01 ‘

144

1800

€ 148.45

Empty tray

4.10

1/2''

DIN ISO 3121 1174-2

c Wheel nut sockets

2309K

Accessory tools for IMPACT sockets 1/2'' a square drive outside D E 12.5, inside a G 12.5

a-drive, with plastic sleeve. Sleeve extension protects not only wheel bolts and nuts but also the wheel and holes.

1/2''

Finish: Chrome Alloy Steel, gunmetal finish

‘

Code

A mm

L mm

O mm

R g

17 19 20.8

87 87 87

32 32 32

242 250 265

1 1 1

‘

23 09 10 17 23 09 10 19 23 09 12 08

Extensions

€ 32.70 34.30 34.00

‘ ‘

ES 2309K/3

Code

L mm

d mm

R g

509/2IMP 509/5IMP 509/10IMP

52 130 255

30 30 30

151 271 452

5 5 5

‘

33 01 00 01 33 01 00 02 33 01 00 03

€ 19.30 23.90 30.00

‘

510IMP

Universal joint

175 x 175 x 30 mm, 3 pieces ‘

Code

R g

€

800

105.10

‘

96 83 82 60 ‘

‘

1/2''

No 2309K ‘

83 81 20 80

a sizes 17; 19; 20.8

Empty tray

mm-13/16''

Code

4.10

‘

L mm

d mm

R g

210

d mm

R g

30 30

109 174

5 5

R g

€

1 1

10 10

2.25 2.25

‘

33 02 00 00

€ 45.70

‘

p IMPACT sockets

2308TX

Adaptors

a-drive, external TORX®, for power drivers, Chrome Alloy Steel, gunmetal finish.

1/2''

‘

Code

‘ ‘

Code

size

C mm

d1 mm

d2 mm

L mm

R g

€

E10 E12 E14 E16 E18 E20 E24

9.4 11.1 12.9 14.7 16.6 18.4 22.1

14 15.9 17.7 20 22 24.5 30

25 25 25 25 30 30 30

38 38 38 38 38 38 41.2

67 73 73 77 115 120 149

10 10 10 10 10 10 10

12.00 12.30 12.10 12.80 14.20 15.00 19.10

‘

23 08 00 10 23 08 00 12 23 08 00 14 23 08 00 16 23 08 00 18 23 08 00 20 23 08 00 24 1

‘

33 03 00 02 33 03 00 05

inside outside L a '' D '' mm

513IMP 514IMP

1/2 1/2

3/8 3/4

37 49

€ 16.80 19.30

‘

Rubber rings ‘

Code

‘

39 01 19 40 39 01 24 40

5091/1IMP 1) 5091/2IMP 2)

‘

) for Socket sizes 8–14 mm, TORX® size E10–E16, size T30–T60 ) for Socket sizes 15–27mm, TORX® size E18–E24 and accessories

n IMPACT sockets

2307TX

2 ‘

a-drive, inside TORX , for power drivers, Chrome Alloy Steel, gunmetal finish. ®

1/2''

Connecting pins ‘

Code

R g

€

1 2

10 10

0.90 0.90

‘

39 02 20 30 39 02 25 30

5092/1IMP 1) 5092/2IMP 2)

‘

) for Socket sizes 8–14 mm, TORX® size E10–E16, size T30–T60 ) for Socket sizes 15–27 mm, TORX® size E18–E24 and accessories

2 ‘

Code

size

C mm

d mm

L mm

R g

T30 T40 T45 T50 T55 T60

5.5 6.6 7.8 8.8 11.2 13.2

25 25 25 25 25 25

40 40 40 40 40 40

57 58 59 57 61 66

5 5 5 5 5 5

‘

23 07 00 30 23 07 00 40 23 07 00 45 23 07 00 50 23 07 00 55 23 07 00 60 1

‘

€ 17.00 18.40 18.50 18.60 26.30 26.30

‘

145

Power tools

3/4''

c IMPACT sockets

55IMP

DIN ISO 3121 1174-2

Accessory tools for IMPACT sockets 3/4'' a square drive outside D F 20, inside a H 20

a-drive DIN 3129/ISO 2725-2, for power drivers, Chrome Alloy Steel, gunmetal finish.

3/4''

Finish: Chrome Alloy Steel, gunmetal finish Extensions ‘

Code

A mm

d1 mm

d2 mm

L mm

t mm

R g

17 18 19 21 22 24 27 28 29 30 32 33 34 36 38

29 30.5 32 35 36.5 39.5 43.5 45 46 47.4 49.9 51.5 52.4 54.9 58

44 44 44 44 44 44 44 44 44 44 44 44 44 44 44

48 48 48 50 50 50 51 54 54 54 54 54 54 57 58

23 23 23 25 25 24.5 24.5 27 26.5 26.5 26 25.5 29 32 33

365 345 359 375 377 382 387 417 425 438 456 477 490 545 592

5 5 5 5 5 5 5 5 5 2 2 2 2 2 2

‘

€ ‘

25 01 00 17 25 01 00 18 25 01 00 19 25 01 00 21 25 01 00 22 25 01 00 24 25 01 00 27 25 01 00 28 25 01 00 29 25 01 00 30 25 01 00 32 25 01 00 33 25 01 00 34 25 01 00 36 25 01 00 38 1

22.30 23.40 22.30 23.40 22.30 23.80 25.30 25.30 26.40 24.40 29.40 32.00 33.80 35.10 39.40

Code

L mm

d mm

R g

560/7IMP 560/10IMP 560/13IMP

180 250 330

44 44 44

805 1051 1305

5 5 5

‘

35 01 00 01 35 01 00 02 35 01 00 03 ‘

561IMP

Universal joint

‘

Code

56IMP

L mm

d mm

R g

657

R g

335 477

5 5

R g

€

2.45

R g

€

1.00

‘

IMPACT sockets

€ 61.50 70.50 83.50

35 02 00 00

€ 72.00

‘

a-drive, for power drivers, extra deep, Chrome Alloy Steel, gunmetal finish.

3/4''

Adaptors

‘

Code

‘

Code

A mm

d1 mm

d2 mm

L mm

t mm

R g

21 22 24 27 30 32 34 36

35 36.5 39.5 43.5 47.4 49.9 52.4 54.9

44 44 44 44 44 44 44 44

100 100 100 100 100 100 100 100

75 75 74.5 72.5 72.5 72 71.5 71

864 854 838 800 860 922 983 1038

2 2 2 2 2 2 2 2

‘

25 02 00 21 25 02 00 22 25 02 00 24 25 02 00 27 25 02 00 30 25 02 00 32 25 02 00 34 25 02 00 36 1

inside outside L d a '' D '' mm mm

‘

€ 36.60 36.60 36.60 38.00 42.80 43.30 50.50 56.00

‘

35 03 00 03 35 03 00 06

568IMP 569IMP

3/4 3/4

1/2

56 65

44 44

€ 27.80 31.80

‘

5591IMP

Rubber ring

‘

Code ‘

39 01 36 50 ‘

for sockets and accessories ‘

c IMPACT sockets

2509

5592IMP

a-drive, for power drivers, extra deep, with reduced diameter, Chrome Alloy Steel, gunmetal finish.

3/4''

Connecting pin

‘

Code ‘

39 02 35 40 ‘

for sockets and accessories ‘

‘

Code

A mm

d1 mm

d2 mm

L mm

t mm

R g

27 30 32 33

40.5 44.3 46.8 48

44 44 44 44

100 100 100 100

72.5 72.5 72 72

672 728 778 803

2 2 2 2

‘

25 09 00 27 25 09 00 30 25 09 00 32 25 09 00 33 ‘

for Trilex wheels ‘

146

€ 47.60 51.50 55.00 56.00

1''

DIN ISO 3121 1174-2

c IMPACT sockets

60IMP

Accessory tools for IMPACT sockets 1'' a square drive outside D F 25, inside a H 25

1'' a-drive, DIN 3129/ISO 2725-2, for power drivers, Chrome Alloy Steel, gunmetal finish.

Finish: Chrome Alloy Steel, gunmetal finish Extensions ‘

Code

A mm

d1 mm

d2 mm

L mm

t mm

R g

24 27 30 32 33 36 38 41 42 46 50 55 60

41.5 45 49 51.5 52.5 56.5 59 63 64.5 69.5 74.5 81 87

54 54 54 54 54 54 54 54 54 54 54 54 54

58 60 62 63 63 67 70 70 73 76 82 87 91

28 30 32 32 31.5 34.5 37 36.5 39 41 52 57 61

638 654 688 694 692 754 836 892 970 1106 1362 1669 1960

‘

€ ‘

26 01 00 24 26 01 00 27 26 01 00 30 26 01 00 32 26 01 00 33 26 01 00 36 26 01 00 38 26 01 00 41 26 01 00 42 26 01 00 46 26 01 00 50 26 01 00 55 26 01 00 60 1

2 32.00 2 30.30 2 36.60 2 35.40 2 37.40 2 43.20 2 45.80 2 46.40 1 55.50 1 56.00 1 68.50 1 87.00 1 101.00

‘

Code

L mm

d mm

R g

859/7IMP 180 859/13IMP 330

54 54

1361 2168

2 2

‘

36 01 00 01 36 01 00 02

€ 90.00 116.00

‘

871IMP

Universal joint

‘

c IMPACT sockets

66IMP

Code

L mm

d mm

R g

125

1244

‘

36 02 00 00

1'' a-drive, for power drivers, extra deep, Chrome Alloy Steel, gunmetal finish.

€ 128.00

‘

Adaptors 1''; 11/2''

‘ ‘

Code

A mm

d1 mm

d2 mm

L mm

t mm

R g

‘

26 02 00 24 26 02 00 27 26 02 00 30 26 02 00 32 26 02 00 33 26 02 00 36 26 02 00 38 26 02 00 41 26 02 00 46

24 27 30 32 33 36 38 41 46

41.5 45 49 51.5 52.5 56.5 59 63 69.5

54 54 54 54 54 54 54 54 54

110 110 110 110 110 110 110 110 110

80 80 79.5 79 78.5 78 77 76 72

1431 1393 1338 1296 1274 1312 1355 1504 1711

S 2 2 2 2 2 2 2 2 2

€ 51.50 52.50 54.50 56.50 60.00 60.50 65.00 69.00 84.50

‘

Code ‘

36 03 00 05 36 03 00 06

inside a ''

866IMP 1 867IMP 1) 11/2

outside L d D '' mm mm 3/4

70 90

R g

54 565 86 2100

2 1

€ 52.00 331.00

‘

) also for Multipower No MP300-5000 (page 184)

‘

6091IMP

Rubber ring

‘

Code

R g

€

3.00

R g

€

1.55

‘

39 01 48 50 ‘

c IMPACT sockets

2609

for sockets and accessories ‘

1'' a-drive, for power drivers, extra deep, with reduced outside diameter, Chrome Alloy Steel, gunmetal finish.

6092IMP

Connecting pin

‘

Code ‘

39 02 50 50 ‘

for sockets and accessories ‘

‘

Code

A mm

d1 mm

d2 mm

L mm

t mm

R g

27 30 32 33

42.3 46 48.5 49.8

54 54 54 54

110 110 110 110

80 79.5 79 78.5

1001 1047 1015 1102

2 2 2 2

‘

26 09 00 27 26 09 00 30 26 09 00 32 26 09 00 33

€ 58.50 64.50 68.00 68.00

‘

for wheel nuts ‘

147

Power tools k BITS

m BITS

DIN 3128, for Phillips screws.

for tri-square socket head screws (XZN®). ‘

Code

‘

Code

Phillips- outside E Recess®

‘

08 00 00 00 08 00 00 01 08 01 00 00 08 01 00 01 08 01 00 02 08 01 00 03 08 03 00 01 08 03 00 02 08 03 00 03 08 03 00 04 1

1218 1219 1220 1221 1222 1223 1231 1232 1233 1234

000 00 0 1 2 3 1 2 3 4

C4 C4 C 6.3 C 6.3 C 6.3 C 6.3 C8 C8 C8 C8

L mm

R g S

1/4 1/4 1/4 1/4 5/16 5/16 5/16 5/16

28 28 25 25 25 25 32 32 32 32

3 3 5 5 5 5 9 10 10 12

5 5 10 10 10 10 10 10 10 10

size

1350 1356 1357 1358 1359 1360

M4 M5 M6 M8 M10 M12

‘

€ 3.70 3.70 1.55 0.85 0.85 0.85 2.80 2.80 2.80 3.00

08 20 00 04 08 20 00 10 08 20 00 11 08 20 00 12 08 20 00 13 08 20 00 14 1

C 6,3 C 6.3 C 6.3 C8 C8 C8

1/4 1/4 1/4 5/16 5/16 5/16

L mm

R g S

25 25 25 28 38 38

4 5 5 10 15 20

10 10 10 10 10 10

€ 2.95 2.90 2.90 3.40 4.30 4.75

‘

outside E DIN 3126/ISO 1173 DIN 65254 (M4, M5, M6) Application: No 1350, size M4, for door lock attachment on the Audi TT, VW Golf, Bora, Passat B5, Lupo, New Beetle ‘

n BITS

‘

outside E DIN 3126/ISO 1173 Phillips-Recess® DIN 5260 extra hard for self tapping and other hardened screws.

outside E ''

for inside TORX® screws

‘

l BITS

‘

Code

for POZIDRIV/SUPADRIV® screws, extra hard.

08 13 00 03 08 13 00 04 08 13 00 05 08 13 00 06 08 13 00 07 08 13 00 08 08 13 00 09 08 13 00 10 08 13 00 15 08 13 00 20 08 13 00 25 08 13 00 27 08 13 00 30 08 13 00 40 08 13 00 45 08 14 00 27 08 14 00 30 08 14 00 40 08 14 00 45 08 14 00 50 08 14 00 55 1

‘

Code

‘

08 05 00 01 08 05 00 02 08 05 00 03

POZIDRIV/ outside E '' SUPADRIV®

PZ1221 PZ1222 PZ1223

1 2 3

C 6.3 C 6.3 C 6.3

C outside size mm E ''

L mm

R g S

1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1430 1431 1432 1433 1434 1435

T3 T4 T5 T6 T7 T8 T9 T 10 T 15 T 20 T 25 T 27 T 30 T 40 T 45 T 27 T 30 T 40 T 45 T 50 T 55

28 28 28 26 26 26 26 26 26 26 26 26 26 26 26 35 35 35 35 35 35

3 3 3 5 5 5 5 5 5 5 6 6 6 7 8 11 11 12 14 14 20

‘

1/4 1/4 1/4

L mm 25 25 25

R g S 5 5 6

10 10 10

€ 0.85 0.85 0.85

‘

outside E DIN 3126/ISO 1173 ‘

r BITS screwdrivers DIN 3127/ISO 2351, for slotted screws.

1.1 1.3 1.3 1.6 2.0 2.3 2.5 2.7 3.3 3.8 4.4 5.0 5.5 6.6 7.8 5.0 5.5 6.6 7.8 8.8 11.2

C4 C4 C4 C 6.3 C 6.3 C 6.3 C 6.3 C 6.3 C 6.3 C 6.3 C 6.3 C 6.3 C 6.3 C 6.3 C 6.3 C8 C8 C8 C8 C8 C8

1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 5/16 5/16 5/16 5/16 5/16 5/16

5 5 5 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

€ 3.65 3.65 3.65 3.55 3.25 3.25 3.25 3.10 3.10 3.10 3.00 3.00 3.00 3.00 3.75 4.75 4.75 5.20 5.20 5.50 5.70

‘ ‘

Code

axb mm

‘

08 07 00 17 08 07 00 18 08 07 00 19 08 07 00 20 08 07 00 21 08 07 00 22 08 07 00 23 08 07 00 24 08 07 00 25 08 07 00 26 08 07 00 30 08 07 00 27 08 07 00 28 08 07 00 29 08 08 00 30 08 08 00 31 08 08 00 32 08 08 00 33 08 08 00 34 08 08 00 35 08 08 00 36 1

1157 0.25 x 1.5 1158 0.4 x 2.0 1159 0.4 x 2.5 1160 0.5 x 3.0 1161 0.5 x 4.0 1162 0.6 x 3.5 1163 0.6 x 4.5 1164 0.8 x 4.0 1165 0.8 x 5.5 1166 1.0 x 5.5 1166/1 1.2 x 6.5 1167 1.2 x 8.0 1168 1.6 x 8.0 1169 1.6 x 10.0 1180 0.8 x 5.5 1181 1.0 x 5.5 1182 1.2 x 6.5 1183 1.2 x 8.0 1184 1.6 x 8.0 1185 1.6 x 10.0 1186 2.0 x 12.0

‘

outside E DIN 3126/ISO 1173 ‘

148

outside E '' C4 C4 C4 C 6.3 C 6.3 C 6.3 C 6.3 C 6.3 C 6.3 C 6.3 C 6.3 C 6.3 C 6.3 C 6.3 C8 C8 C8 C8 C8 C8 C8

1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 5/16 5/16 5/16 5/16 5/16 5/16 5/16

L mm

R g S

28 28 28 39 39 39 39 39 39 39 39 39 39 39 41 41 41 41 41 41 41

3 3 3 5 6 6 6 6 7 8 9 12 12 16 10 11 13 15 15 19 24

5 5 5 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

€ 3.90 3.90 3.90 3.00 3.05 3.00 3.05 3.00 3.05 3.00 3.00 3.25 3.15 3.55 3.45 3.55 3.55 4.35 4.35 5.45 6.40

outside E DIN 3126/ISO 1173 Application: No 1416, size T20, for the door handle attachment for Mercedes-Benz types 168 and 203 No 1421, size T45, for removing and refitting the front doors on the VW Golf III and Vento from model year 93 on No 1435, size T55, for screws in rear seats of BMW X6 Model E71, 7 series Model F01/F02 ‘

n BITS

1427 ®

for inside TORX screws. ‘

Code

size

‘

08 13 10 25

T 25

‘

For BMW series 3 and 5 outside E DIN 3126/ISO 1173 ‘

outside E '' C 6.3

1/4

L mm

R g S

€ 3.15

o BITS

i BITS

1299

with hollow point for inside TORX® screws (TORX® TAMPER RESISTANT).

for inside hexagon screws, for operating the adjusting screws on torque wrenches No 720, 721, 730 and 730N.

‘

Code

C outside size mm E ''

1440 1441 1442 1443 1444 1445 1446

T 10 T 15 T 20 T 25 T 27 T 30 T 40

‘

08 16 00 10 08 16 00 15 08 16 00 20 08 16 00 25 08 16 00 27 08 16 00 30 08 16 00 40 1

2.7 3.3 3.8 4.4 5.0 5.5 6.6

C 6.3 C 6.3 C 6.3 C 6.3 C 6.3 C 6.3 C 6.3

L mm

1/4 1/4 1/4 1/4

R g S

26 26 26 26 26 26 26

1/4 1/4 1/4

6 6 6 6 6 6 6

10 10 10 10 10 10 10

€ 4.60 4.60 4.40 4.30 4.30 4.30 4.30

‘

Code

B mm

‘

08 09 00 02

outside E

L mm

R g

€

C 6.3

1/4

3.10

‘

outside E DIN 3126/ISO 1173 ‘

s BITS screwdrivers

13008

for TRI-WING® screws.

‘

outside E DIN 3126/ISO 1173 ‘

ä 5-star BITS

‘

Code

with hollow point, for female 5-star screws with a centring pin.

08 25 00 00 08 25 00 01 08 25 00 02 08 25 00 03 08 25 00 04 08 25 00 05 08 25 00 06 1

‘

Code

outside E ''

‘

08 16 10 10 08 16 10 15 08 16 10 20 08 16 10 25 08 16 10 27 08 16 10 30 08 16 10 40 1

1440 TPI 10 1441 TPI 15 1442 TPI 20 1443 TPI 25 1444 TPI 27 1445 TPI 30 1446 TPI 40

C 6.3 C 6.3 C 6.3 C 6.3 C 6.3 C 6.3 C 6.3

1/4 1/4 1/4 1/4 1/4 1/4 1/4

L mm

R g

26 26 26 26 26 26 26

6 6 6 6 6 6 6

5 5 5 5 5 5 5

TRIWING®

‘

€ 5.60 5.60 5.45 5.45 5.30 5.30 5.30

outside E

0 1 2 3 4 5 6

C 6.3 C 6.3 C 6.3 C 6.3 C 6.3 C 6.3 C 6.3

'' 1/4 1/4 1/4 1/4 1/4 1/4 1/4

L mm 25 25 25 25 25 25 25

R g S 5 5 5 5 5 5 8

10 10 10 10 10 10 10

€ 5.20 5.20 5.20 5.20 5.20 5.20 6.75

‘

outside E DIN 3126/ISO 1173

‘

13010

t BITS screwdrivers

for TORQ-SET® screws.

‘ ‘

outside E DIN 3126/ISO 1173 ‘

Code

TORQSET®

‘

1204/8

08 26 00 00 08 26 00 01 08 26 00 02 08 26 00 03 08 26 00 04 08 26 00 05 08 26 00 06 08 26 00 08 08 26 00 10 08 26 00 16 08 26 00 20 08 26 00 24

5-star BITS set

Storage facility for BITS screwdriver inserts. Content: 1 bit-holder No 412 ä 7 BITS screwdriver inserts for female 5-star screws with centring pin, sizes TPI 10, 15, 20, 25, 27, 30, 40. For generators, motor management units, airflow sensors, door trim, immobilisers and injection pumps (e.g. Ford, Mercedes-Benz cars & HGVs, Rover, Volvo, VW/Audi).

outside E

0 1 2 3 4 5 6 8 10 1/4 A 5/16 A 3/8 A

C 6.3 C 6.3 C 6.3 C 6.3 C 6.3 C 6.3 C 6.3 C 6.3 C 6.3 C8 C8 C8

'' 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 5/16 5/16 5/16

L mm

R g S

25 25 25 25 25 25 25 25 25 32 32 32

5 5 5 5 5 5 5 5 5 11 11 11

10 10 10 10 10 10 10 10 10 10 10 10

€ 5.30 5.30 5.30 5.30 5.30 5.30 5.65 5.65 5.65 6.25 6.25 6.25

‘

outside E DIN 3126/ISO 1173 ‘

‘

Code

R g

‘

96 08 01 13

€ 57.00

‘

i BITS DIN 7426/ISO 3109, for socket head screws, extra hard. ‘

Code

‘

08 09 00 03 08 09 00 04 08 09 00 05 08 09 00 06 08 09 00 08 1

1300 1301 1302 1303 1304

B outside mm E 3 4 5 6 8

C 6.3 C 6.3 C 6.3 C 6.3 C 6.3

'' 1/4 1/4 1/4 1/4 1/4

L mm

R g

€

25 25 25 25 30

4 5 5 6 11

10 10 10 10 10

2.05 2.05 2.05 2.05 2.50

‘

outside E DIN 3126/ISO 1173 ‘

149

Power tools 1201

BITS box

4000

Spinner handles

for BITS screwdriver bits with outside hexagon 1/4'' DIN 3126/ISO 1173 C 6.3, handle of impact proof plastic. Internal hex drive with a collar-thrust spring (registered design). Bits are easy to insert, lock securely in position and can be removed just as easily; even hex bits with a wide groove (Type E, DIN 3126/ISO 1173).

Storage box with screwdriver bits. Content: 1 magnetic bit-holder k 3 Bits, sizes 1; 2; 3 for Phillips screws l 3 Bits, sizes 1; 2; 3 for POZIDRIV/SUPADRIV® screws r 3 Bits, sizes 0.6 x 4.5; 0.8 x 5.5; 1.2 x 6.5 mm; for slotted screws o 6 Bits, size T10; size T15; size T20; size T25; size T30; size T40; for inside TORX® screws (TORX® TAMPER RESISTANT) b 3 Bits, sizes 4; 5; 6 mm; for inside hexagon screws

‘

Code ‘

18 07 10 26

inside b '' D 6.3

1/4

d mm

L1 mm

L2 mm

R g S

190

103

€ 24.20

‘

inside b DIN 3126/ISO 1173

‘

Code

R g

195

‘

96 08 01 02

‘

€

4006/1

34.70

Spinner with magazine holder

‘

1204/21-1

for 6 BITS screwdriver bits (25 mm) with 1/4'' outer hexagon, DIN 3126/ISO 1173 C 6.3, transparent plastic handle for storing BITS with rotating selection cap, internal hexagon and powerful permanent magnet.

BITS box

Storage box with screwdriver bits. Content: 1 magnetic bit-holder k 4 Bits, sizes 1; 2 (2x); 3 for Phillips screws l 4 Bits, sizes 1; 2 (2x); 3 for POZIDRIV/SUPADRIV® screws n 9 Bits, sizes T10; T15; T20 (2x); T25 (2x); T27; T30; T40; for inside TORX® screws b 3 Bits, sizes 4; 5; 6 mm; for inside hexagon screws

‘

Code ‘

18 08 00 17

inside b D 6.3

d L1 '' mm mm 1/4

10 120

L2 mm

R g S

230

124

€ 31.10

‘

inside b DIN 3126/ISO 1173 ‘

12504

BIT holder

for BITS screwdriver bits with outside hexagon 1/4'' DIN 3126/ISO 1173 C 6.3, flexible shaft, handle of impact proof plastic. ‘

Code

‘

R g

Code ‘

96 08 01 21

185

‘

S 1

€ 28.60

‘

1204/21-2

R g S

D 6.3

1/4

175

290

168 10 16.30

€

‘

BIT holder

‘

Code ‘

18 11 00 16

inside b

L1 mm

L2 mm

R g S

D 6.3

1/4

‘

inside b DIN 3126/ISO 1173 ‘

R g

181

‘

150

L2 mm

inside b DIN 3126/ISO 1173

12503

‘

L1 mm

for BITS screwdriver bits with outside hexagon 1/4'' DIN 3126/ISO 1173 C 6.3, inside hexagon with magnet, stubby version, handle of impact proof plastic.

Storage box with screwdriver bits. Content: 1 magnetic bit-holder k 3 Bits, sizes 1; 2; 3 for Phillips screws r 4 Bits, sizes 0.5 x 3.0; 0.6 x 4.5; 0.8 x 5.5; 1.2 x 6.5 mm; for slotted screws n 6 Bits, sizes T10; T15; T20; T25; T30; T40; for inside TORX® screws b 3 Bits, sizes 4; 5; 6 mm; for inside hexagon screws t 4 Bits, sizes 4; 6; 8; 10 mm; for TORQ-SET® screws

96 08 01 22

‘

BITS box

Code

18 10 10 16

inside b

€ 43.10

€

10 13.20

4007

BIT holder

4008

for BITS screwdriver bits with outside hexagon 1/4'' DIN 3126/ISO 1173 C 6.3, inside hexagon with magnet, with T-handle.

‘

inside b

Code ‘

18 09 00 16

D 6.3

d L1 '' mm mm 1/4

10 200

L2 mm

R g S

165

108

Ratcheting BIT holder

€ 15.20

‘

inside b DIN 3126/ISO 1173 ‘

415B

BIT ratchet

‘

Code ‘

18 12 00 00

inside b

‘

11 13 10 11

D 6.3

L b '' mm mm 1/4

117 22

a mm

R g S

L1 mm

L2 mm

d mm

R g

D 6.3

1/4

206.5

185

€ 36.40

inside b DIN 3126/ISO 1173 ‘

4008/27/1

€ 54.50

‘

415SGB

‘

Code

inside b

BIT ratchet

reversible, all steel handle, for BITS screwdrivers with outside hexagon 1/4'' DIN 3126/ISO 1173 C 6.3, 22 teeth. Internal hex drive with a collar-thrust spring (registered design). Bits are easy to insert, lock securely in position and can be removed just as easily; even hex bits with a wide groove (Type E, DIN 3126/ISO 1173).

Ratcheting BIT holder set

‘

Code ‘

11 13 00 11

inside b D 6.3

L mm

R g S

1/4

117

Code

R g

1025

‘

€

96 18 12 02

€ 143.70

‘

56.00

‘

inside b DIN 3126/ISO 1173

3115/2

‘

25B

BIT holder

for torque screwdrivers No 760 and No 775, inside hexagon DIN 3126 D4 for BITS screwdriver bits C4, outside hexagon 1/4'' DIN 3126/ISO 1173 E 6.3.

Ratcheting BIT holder

for hexagon bits, magnetic location, reversible heads angled, chrome plated.

‘

Code ‘

inside b

outside E ''

31 15 00 03 4 mm

E 6.3

1/4

L mm

R g

L mm

R g

€ 16.00

‘

outside E DIN 3126/ISO 1173

‘

Code ‘

inside b ''

L d1 d2 a1 a2 R mm mm mm mm mm g

41 54 16 20 1/4 x 5/16 138 20 ‘

17 105

‘

S 1

€

1200/1

24.40

BIT holder

with permanent magnet 1/4'' inside and outside hexagon 1/4'' DIN 3126/ISO 1173 C 6.3. ‘

Code ‘

inside b

38 12 00 01 D 6.3

'' 1/4

outside E '' E 6.3

1/4

€ 9.75

‘

inside b/outside E DIN 3126/ISO 1173 ‘

151

Power tools 3825/1

Quick-change holder

3216

Adaptors, machine operated

DIN 7428/ISO 3317, with outside hexagon for power operated IMPACT sockets DIN 3129/ISO 2725-2 with inside square DIN 3121/ISO 1174-2. Large collar diameter for better support of IMPACT sockets. Square drive with spring loaded locking pin, Chrome Alloy Steel, gunmetal finish.

for BITS screwdriver bits with 1/4'' external hexagonal drive DIN 3126/ISO 1173 C 6.3, with quick-action chuck, adaptor with external hexagonal drive for powered use. ‘

Code ‘

inside b

38 25 00 02 D 6.3

'' 1/4

outside E '' E 6.3

1/4

L mm

R g

€ 19.30

‘

inside b/outside E DIN 3126/ISO 1173

Code

‘

3115

32 16 00 01 32 16 00 02

Adaptor, manually operated

outside outside L D '' E '' mm 3/8 3/8

3216/1 E 10 3216/2* E 10

E 6.3 E 6.3

1/4 1/4

50 100

d R mm g S 15.5 23 15.5 42

5 5

€ 20.70 27.30

‘

outside D DIN 3121/ISO 1174-2 Type E (spring-loaded locking pin) outside E DIN 3126/ISO 1173 Type E * to be discontinued

for torque screwdrivers No 760 and No 775, for manually operated sockets with recessed 6.3 (1/4'') square drive DIN 3120/ISO 1174-1 Type C and D, square drive with ball bearing, Chrome Alloy Steel, gunmetal finish.

‘

3316/1

‘

Code ‘

outside outside D '' E ''

31 15 00 01 A 6.3

1/4

E 6.3

1/4

L mm

d mm

R g

8.9

€ 10.90

‘

Adaptor, machine operated

outside D DIN 3120/ISO 1174-1 Type A (spring-loaded ball) outside E DIN 3126/ISO 1173 Type E ‘

3115/1

Adaptor, manually operated

for manually operated sockets with recessed 6.3 (1/4'') square drive DIN 3120/ISO 1174-1 Type C and D, square drive with ball bearing, Chrome Alloy Steel.

‘

outside outside L D '' E '' mm

Code ‘

33 16 00 01

‘

Code ‘

outside outside D '' E ''

31 15 00 02 A 6.3

1/4

C 6.3

1/4

1/2

E 12.5

E 6.3

1/4

d R mm g S 18

€ 24.20

‘

L mm

R g

€ 5.20

outside D DIN 3121/ISO 1174-2 Type E (spring-loaded locking pin) outside E DIN 3126/ISO 1173 Type E ‘

‘

outside D DIN 3120/ISO 1174-1 Type A (spring-loaded ball) outside E DIN 3126/ISO 1173 Type C

BIT holder

‘

3116/1

Adaptor, machine operated

DIN 7428/ISO 3317, with outside hexagon for power operated IMPACT sockets DIN 3129/ISO 2725-2 with inside square DIN 3121/ISO 1174-2. Square drive with spring loaded locking pin, Chrome Alloy Steel, gunmetal finish.

square drive socket, for hand use only, for BITS-Screwdriver bits with outside hexagon 1/4'' or 5/16'' DIN 3126/ISO 1173 C 6.3 or C 8, Chrome Alloy Steel, chrome plated. Internal hex drive with a collar-thrust spring (registered design). Bits are easy to insert, lock securely in position and can be removed just as easily; even hex bits with a wide groove (Type E, DIN 3126/ISO 1173). ‘

Code

inside b

412 442 443 543

D 6.3 D 6.3 D8 D8

1/4 1/4 5/16 5/16

‘

Code ‘

31 16 00 01

outside outside L D '' E '' mm E 6.3 1/4 E 6.3

1/4

d R mm g S 8.9

‘

outside D DIN 3121/ISO 1174-2 Type E (spring-loaded locking pin) outside E DIN 3126/ISO 1173 Type E ‘

152

€ 20.10

11 18 00 10 12 18 00 26 12 18 00 30 13 18 00 10 ‘

inside b DIN 3126/ISO 1173 inside a DIN 3120/ISO 1174-1 ‘

inside a C 6.3 C 10 C 10 C 12.5

d '' mm 1/4 3/8 3/8 1/2

11.6 16.5 16.5 22

L R mm g S 25 32 32 38

15 30 39 65

5 5 5 5

€ 14.60 17.00 18.00 20.50

412-1

k BITS screwdrivers

BIT holder

c inside hexagon, DIN 3126/ISO 1173 D 6.3. Outer w 10 mm for use in tools with 10 mm internal hex drive or internal double hexagon (e.g. ''FLEXI'' double-ended flexi-joint spanners, T-handle universal joint spanners, box spanners, ratchet ring spanners etc.). Internal hex drive with a collar-thrust spring (registered design). Bits are easy to insert, lock securely in position and can be removed just as easily; even hex bits with a wide groove (Type E, DIN 3126/ISO 1173). 1/4''

DIN 3128, for Phillips screws. ‘

Code 08 31 00 01 08 31 00 02 08 31 00 03

L mm

d mm

R g

11 18 00 20 10 mm

11.6

L mm

R g S

E 6.3 E 6.3 E 6.3

1/4 1/4 1/4

50 50 50

10 11 11

10 10 10

2.40 2.40 2.40

L mm

R g S

€

1/4 1/4 1/4

50 50 50

10 11 11

1 2 3

€

outside E DIN 3126/ISO 1173 Phillips-Recess® DIN 5260 €

l BITS screwdrivers

12.00

for POZIDRIV/SUPADRIV® screws.

‘

736

1260 1261 1262

outside E

‘

outside E

Code

PhillipsRecess®

‘

BIT holder insert tools ‘

Internal hex drive with a collar-thrust spring (registered design). Bits are easy to insert, lock securely in position and can be removed just as easily; even hex bits with a wide groove (Type E, DIN 3126/ISO 1173).

Code ‘

08 32 00 01 08 32 00 02 08 32 00 03

POZIDRIV/ outside E No SUPADRIV® 1270 1271 1272

1 2 3

E 6.3 E 6.3 E 6.3

10 10 10

2.45 2.45 2.45

‘

outside E DIN 3126/ISO 1173 ‘

i BITS screwdrivers ''

‘

inside size b

58 26 10 10 58 26 26 10 58 26 10 40

10 D8 10-1 D 6.3 40 D8

5/16 1/4 5/16

Code

‘

DIN 7426/ISO 3109, for Socket Head Screws.

‘

J mm

b mm

h mm

S mm

R g

€

; ; ,

16 14 16

12.5 17.5 10 17.5 12.5 25

47 45 112

28.50 29.00 38.90

‘

inside b DIN 3126/ISO 1173 ‘

Code

B mm

outside E

3 4 5 6 8

E 6.3 E 6.3 E 6.3 E 6.3 E 6.3

‘

08 33 00 03 08 33 00 04 08 33 00 05 08 33 00 06 08 33 00 08 1

1280 1281 1282 1283 1284

L mm

R g S

1/4

50 50 50 50 50

9 10 12 13 18

L mm

R g S

70 70 70 70 70 70 70

14 14 14 15 16 16 18

'' 1/4 1/4 1/4 1/4

€

10 10 10 10 10

6.45 6.45 6.45 6.45 8.35

‘

BITS screwdrivers

outside E DIN 3126/ISO 1173 ‘

with outside hexagon DIN 3126/ISO 1173, shape E 6.3 (1/4''), for use in power drivers.

n BITS screwdrivers for inside TORX® screws.

r BITS screwdrivers

‘

DIN 3127/ISO 2351, for slotted screws. Code

size

outside E

1290 1291 1292 1293 1294 1295 1296

T 10 T 15 T 20 T 25 T 27 T 30 T 40

E 6.3 E 6.3 E 6.3 E 6.3 E 6.3 E 6.3 E 6.3

‘

08 34 00 10 08 34 00 15 08 34 00 20 08 34 00 25 08 34 00 27 08 34 00 30 08 34 00 40 1

‘

Code

axb mm

‘

08 30 06 35 08 30 08 40 08 30 10 55 08 30 12 65 08 30 16 80 1

1242 1244 1246 1248 1250

0.6 x 3.5 0.8 x 4.0 1.0 x 5.5 1.2 x 6.5 1.6 x 8.0

‘

outside E DIN 3126/ISO 1173 ‘

outside E '' E 6.3 E 6.3 E 6.3 E 6.3 E 6.3

1/4 1/4 1/4 1/4 1/4

L mm

R g S

50 50 50 50 50

8 9 10 12 14

10 10 10 10 10

€ 5.25 5.25 5.25 5.55 6.10

1/4 1/4 1/4 1/4 1/4 1/4 1/4

€

10 10 10 10 10 10 10

7.20 7.20 7.00 6.95 6.95 6.80 6.80

‘

outside E DIN 3126/ISO 1173 ‘

2801

Sockets

with hexagon inserts for power drivers, hexagon fitted with permanent magnet, Chrome Alloy Steel, clear lacquered.

‘

Code ‘

28 01 00 07 28 01 00 08 28 01 00 10 28 01 00 13

A outside mm E 7 8 10 13

E 6.3 E 6.3 E 6.3 E 6.3

d mm

L mm

R g

1/4 1/4 1/4 1/4

12 13 15.5 18.7

50 50 50 50

25 27 35 45

5 5 5 5

€ 11.50 11.50 13.10 19.60

‘

153

Power tools 13006

Special socket

4030

with inside hexagon for BITS screwdriver inserts No 4040–4058, suitable for screws M 5–M 10, torque 120 N m.

registered design, for use on plugs in electronic rack Airbus A320–A340. ‘

Code ‘

outside E

O mm

L mm

R g

E 6.3

1/4

10 22.60

08 23 00 01

IMPACT driver

€

‘

Code

‘

outside E DIN 3126/ISO 1173

‘

inside b ''

L mm

R g

3/8

138

617

32 20 00 01

‘

€ 268.00

‘

13007

BIT screwdriver

Adaptors

for use on plugs in electronic rack Airbus A320–A340.

with outside hexagon, for IMPACT screwdriver No 4030.

‘

Code

B ''

‘

08 24 00 06

outside E

L mm

R g

E 6.3

1/4

3/32

€

‘

Code

outside E DIN 3126/ISO 1173

‘

775/30N/2

‘

7.90 32 21 00 01 33 21 00 01

Set

4035 4036

outside E''

outside D ''

L mm

R g

3/8 3/8

3/8 1/2

38 38

34 43

1 1

axb mm

outside E''

L mm

R g

€

1.0 x 7 1.4 x 9 1.6 x 10 2.0 x 12 1.5 x 13 2.5 x 16

3/8 3/8 3/8 3/8 3/8 3/8

40 40 40 40 40 40

17 19 21 20 24 30

10 10 10 10 10 10

10.70 10.70 11.40 13.10 14.60 16.00

PhillipsRecess®

outside E''

L mm

R g

€

2 3 4

3/8 3/8 3/8

35 35 35

17 17 17

10 11.60 10 11.60 10 11.60

€ 13.80 15.00

‘

r BITS screwdrivers

for use on plugs in electronic rack Airbus A320–A340. Content: 1 each Torque Screwdriver TORSIOMAX No 775/30 Special Socket No 13006 BIT-Screwdriver insert No 13007

for slotted screws, for IMPACT driver No 4030. ‘

Code

‘

08 40 00 10 08 40 00 14 08 40 00 16 08 40 00 20 08 40 00 15 08 40 00 25 1

4040 4041 4042 4043 4044 4045

‘

k BITS screwdrivers

‘

R g

Code ‘

96 51 05 02

235

€

for Phillips screws, for IMPACT driver No 4030.

1 295.50

‘ ‘

4060

IMPACT driver set

Code 08 41 00 02 08 41 00 03 08 41 00 04

for screw sizes M5–M10, in strong metal case. Content: 1 each IMPACT driver No 4030 Adaptors No 4035; No 4036 r BITS screwdrivers for slotted screws No 4040–4044 k BITS screwdrivers for Phillipsscrews No 4050–4052 i BITS screwdrivers for Hex. Socket Head screws No 4055–4058

Code

Phillips-Recess® DIN 5260 ‘

i BITS screwdrivers for socket head screws, for IMPACT driver No 4030. ‘

Code

R g

1410

‘

B mm

outside E''

L mm

R g

€

4055 4056 4057 4058

5 6 8 10

3/8 3/8 3/8 3/8

35 35 35 35

16 16 19 23

10 10 10 10

13.40 13.40 13.40 13.40

‘

€ 464.25

08 42 00 05 08 42 00 06 08 42 00 08 08 42 00 10 ‘

154

4050 4051 4052

‘

96 32 20 01

‘

Torque tools, Torque testers

Torque family Overview

7794-2 7707 W

7791 + 7791-2

MP300

73Nm/15

71/80

721Nf

720Nf

713R

730D

730N

721

730 760

2 000

755

000

cut-out indicating No

Torque wrenches

Torque screwdrivers

Capacity

Page

730D

10–650 N m

164

730N

2–650 N m

166

730

4–800 N m

167

720Nf

160–800 N m

168

721

6–300 N m

168

721Nf

160–1000 N m

169

755

1.5–300 N m

170

3–400 N m

171

3–60 N m

171

713R

712R/6

73Nm/15

160–800 N m

172, 173

2–15 N m

173

775

2–1000 cN m

174

760

15–600 cN m

175

Insert tools for torque wrenches 177

182

MULTIPOWER

MP300

800–5000 N m

184

Torque testers and calibrating units

perfectControl

7794-1

0.4–400 N m

187

perfectControl

7794-2

0.4–400 N m

187

Manutork

7791

0.4–400 N m

190

Manutork

7792

25–1100 N m

191

Test attachments 7790, 7791-2 –10 N m 191 for torque screwdrivers Torque tester 7707 W

0.4–1100 N m

192 157 3

1 Electronic torque wrench/angle-controlled wrench

171

QuickRelease

Firm locking and rapid change of any insert tools

158 4

Easy extension setting Where the insert tool requires an extension adjustment, simply enter the new value. Recalculation using complicated formulae is no longer necessary.

Angle-controlled measurements without a reference arm Broad measuring range (5% – 100% of rated value)

Password protection tamper proof use

Extremely wide range of angle measurement

Various languages available

Units of measurement N m / ft.lb / in.lb

Works-specific identifier

Clockwise and anticlockwise use

Programmable via PC

Freely selectable names for each series of test

For use with all insert tools 9x12 and 14x18 Quickselect rapid recall of predefind sets of operating parameters Defined sequence A number of repeated joints can be grouped as a defined sequence

Readings can either be directly stored, transmitted to the PC or simply displayed

Resistant to oils, grease, fuels, brake fluids and Skydrol Wide range of application: –20°C to +60°C Meets requirements of DKD-R 3-7, Class 2 Deviation of indication ± 1%

Amazingly simple handling

All functions are selected using the arrow keys. The visual guidance system makes operation a simple matter.

Free choice of grip The reading will always be accurate, irrespective of where you grip the torque wrench.

Data output

USB interface

Warning signals

Can be selected as either acoustic (buzzer), tactile (vibration in the handle), visual (LEDs and display) or a combination of these. The point at which the warning signal is triggered can be freely set. 159 5

MANOSKOP速 730D

Electromechanical torque wrench

164

165

QuickRelease safety lock

No 7395-1 The square drive

160 6

Enables a broad range of insert tools

Measure, cut out and record:

When the preset torque is reached, the torque wrench cuts out and indicates this fact to the user via a definite tactile and audible signal. The tightening torques are stored. The data can be transferred to a PC for evaluation and documentation.

Cut-out and indicating

Displays the torque actually applied after the wrench cuts out. In this way, the user has the opportunity to optimise his or her working methods.

Automatic compensation to achieve correct tightening torque even if a changed extension is entered

Different tolerance limits can be set for each joint

Visual red and green signals in the display confirm the status of the joint

Units of measurement: N m / ft.lb / in.lb Automatic keypad lock

Additional security for presets using PIN code

Display also works for anticlockwise torque

Automatic notification of the next calibration date

Angle-controlled measurement without a reference arm using a supplementary module

Overload protection by means of acoustic and visual signals

Calibration with perfectControl calibrating and adjusting unit No 7794-2 Deviation of indication Âą 2%

Rapid setting

The convenient keypad enables the torque wrench to be quickly and easily set

Dual stop signal

Power supply

With tactile and acoustic cut-out signals

Two 1.5 V AA batteries

Easy-to-read display

2-component handle Angle controlled tightening

Simply attach the Angle Module No 7395-1 and connect the cable to the interface

Data output

USB interface

Has ergonomically designed, green softer layers and is resistant to oils, grease, fuels, brake fluids and Skydrol.

161 7

MANOSKOP速 730N

Mechanical torque wrench

The square drive

Protected mechanism Extremely resistant to mechanical wear, protected against dirt inside the outer housing

Enables a broad range of tightening tools

166

Integrated clockwise and anticlockwise operation

Simply by turning over the wrench and insert tool

162 8

QuickRelease safety lock Firm locking and rapid change of insert tools thanks to the QuickRelease safety lock

Accurate one-handed setting – quick & easy control using the knob at the end of the handle Audible setting positions Fail-safe setting mechanism in the knob Clearly readable twin scale (N m and ft.lb)

Square drives with QuickRelease safety locks – for 9x12 mm and 14x18 mm

Handle is resistant to oils, grease, fuels, brake fluids and Skydrol Deviation of indication ± 3%

Noticeable double signals when the preset torque is reached

Two-component handle

Made of extremely tough, impact resistant plastic with a kind-to-the-hands QuickSelect softer layer Rapid setting:

Pull, set, lock. All using the one setting knob

No need for manual reset to zero

Thanks to the wear-free triggering cam system. The measuring element is only under load while force is being applied.

Ring scale with fine settings For the black measuring range on the twin scale

Easily readable double scale The colour differentiation between the N m and ft.lb scales simplifies fine setting

Rapid adjustment

From outside, no disassembly of the torque wrench

163 9

Torque tools Service work & series production MANOSKOP® – indicating and cut-out

• tactile and acoustic trigger signal – 182 176 • mount for interchangeable insert tools • QuickRelease safety lock • fast setting using convenient keypad • automatic compensation to achieve correct tightening torque even if a changed extension is entered • overload protection by means of acoustic and visual signals • automatic keypad lock prevents inadvertent changes • angle-controlled measurements without a reference arm using Angle Module No 7395-1 (refer to page 165) • display also works for anticlockwise torque • units of measurement: N m, ft.lb, in.lb • different tolerance limits can be set for each joint • visual red and green signals in the display confirm the status of the joint • additional security for presets (function mode, trigger or preset value, unit of measurement, tolerance, save, deviating extension) using PIN code • up to 7.500 measurements can be stored • USB interface • automatic notification of the next calibration date • calibration using perfectControl calibrating unit No 7794 or calibration system No 7706 • two-component handle with ergonomically designed green softer layers (resistant to oils, grease, fuels, brake fluids and Skydrol) • with certificate • in sturdy plastic case (sizes 40 and 65 in steel case) • patents applied for • supplied with two 1.5 V AA batteries. AA/LR6, 1.2 V rechargeable cells may also be used. • display deviation value ± 2% 730D

Basic wrenches with tool carrier for insert tools

730D/20

Ü ü

‘

Code

size

10 20 40 65

10–100 N m 20–200 N m 40–400 N m 65–650 N m

‘

96 50 17 10 96 50 17 20 96 50 17 40 96 50 17 65

Setting/display resolution J Nm ft.lb in.lb mm

7.4–75 ft.lb 90–900 in.lb 0.2/0.1 15–150 ft.lb 180–1800 in.lb 0.5/0.1 30–300 ft.lb 360–3600 in.lb 1.0/0.1 48–480 ft.lb 580–5800 in.lb 1.0/0.1

0.2/0.1 2/1.0 0.5/0.1 5/1.0 1.0/0.1 10/1.0 1.0/0.1 10/1.0

‘

730DR

; , , ,

b h mm mm 28 28 28 30.6

23 23 23 25.6

L mm

LF SF R R g mm mm g with box

467 548 688 870

426.5 515 655 837

17.5 25 25 25

1085 1361 1765 3300

1510 1896 5155 6000

€ 399.55 429.00 625.80 775.80

Basic wrench with ratchet insert tool

‘

Code

size

‘

96 50 18 10 96 50 18 20 96 50 18 40 96 50 18 65 ‘

164

10 20 40 65

10–100 N m 7.4–75 ft.lb 20–200 N m 15–150 ft.lb 40–400 N m 30–300 ft.lb 65–650 N m 48–480 ft.lb

W 90–900 in.lb 180–1800 in.lb 360–3600 in.lb 580–5800 in.lb

Setting/display resolution Nm ft.lb in.lb

D ''

R g

Rg with box

0.2/0.1 0.5/0.1 1.0/0.1 1.0/0.1

1/2 1/2 3/4 3/4

1232 1663 2232 3767

1657 2198 4722 6530

0.2/0.1 2/1.0 0.5/0.1 5/1.0 1.0/0.1 10/1.0 1.0/0.1 10/1.0

€ 463.55 497.00 726.80 876.80

7759-3

USB adaptor, jack cable and software No 7732 for No 730D

7395-1

Angle Module for No 730D

Registered design, angle-controlled measurement without a reference arm. For torque wrench No 730D from software release 1.5.8. Torque wrenches No 730D fitted with older releases of the software can be upgraded. Simply attach the module and connect to the torque wrench interface and the No 730D can be used for angle controlled tightening. The measurements are read off and settings made via the torque wrench. When the preset snug point is reached, the torque wrench automatically switches over to angle-controlled measurement in degrees. Depending on the options selected, the torque wrench will either cut out when the preset angle is reached or an alarm is heard. One 1.5 V battery is included in the package. Deviation of indication ± 1%.

Documentation and management of readings on a PC • Read out stored wrench data and joint readings: - Joint identifier - Tool serial number - Date and time of tightening operation - Target torque or target angle - Torque level at which the tool cuts out - Tightening torque or angle reached - Tolerances - Joint evaluation • Storage of joint data in a database • Delete or print highlighted joints from the database • Export displayed joint data to a CSV file (compatible with Excel) • 13 languages • User management • Define new PIN • Delete joint data stored in wrench System requirements: • PC • Microsoft Windows 98 SE or compatible operating system with USB support • USB connection • Installed ODBC driver for Access data

7395-1

7395-1+730D ‘

Code

R g

€

387

408.50

‘

96 58 36 28 ‘

‘

Code

L m

R g

€

1.5

137

120.40

‘

96 58 36 27 ‘

165

Torque tools Service MANOSKOP® 730N • cut-out type – 182 176 • mount for interchangeable insert tools • QuickRelease safety lock • fast, accurate setting thanks to QuickSelect quick-action adjuster • dual stop signal • easy-to-read double scale with colour coding to differentiate between N m and ft.lb scales • the measuring element is only under load while force is being applied, no need for manual reset to zero • can be applied for either clockwise or anticlockwise tightening by turning the inserts over • any force applied to the tool after the ‘click’ or applied in the opposite direction to the current function – e.g. forcible loosening of a jammed screw - does not act on the trigger mechanism and cannot cause damage to it. • two-component handle with ergonomically designed green softer layers (resistant to oils, grease, fuels, brake fluids and Skydrol) • calibration using perfectControl calibrating unit No 7794 or calibration system No 7706. Adjustment without disassembly. • with certificate • registered design • display deviation value ± 3% 730N

Basic wrenches with tool carrier for insert tools

730N/10

Ü ü

5 ‘

Code

size

‘

50 18 10 02 2 2–20 N m 50 18 10 05 5 10–50 N m 50 18 10 10 10 20–100 N m 50 18 10 12 12 25–130 N m 50 18 10 20 20 40–200 N m 50 18 10 40 40 80–400 N m 50 18 10 65 65 130–650 N m 50 58 10 02 a/2 20–180 in.lb 50 58 10 05 a/5 90–450 in.lb 50 58 10 10 a/10 180–900 in.lb 50 58 10 20 a/20 350–1800 in.lb 50 58 10 40 a/40 60–300 ft.lb 1

W 20–180 in.lb 7–37 ft.lb 15–75 ft.lb 20–95 ft.lb 30–150 ft.lb 60–300 ft.lb 100–480 ft.lb 1.5–15 ft.lb 7–37 ft.lb 15–75 ft.lb 30–150 ft.lb 800–3600 in.lb

1Nm 5Nm 10 N m 10 N m 10 N m 20 N m 50 N m 10 in.lb 50 in.lb 100 in.lb 100 in.lb 20 ft.lb

10 in.lb 1 ft.lb 2.5 ft.lb 2.5 ft.lb 5 ft.lb 10 ft.lb 20 ft.lb 0.5 ft.lb 1 ft.lb 2.5 ft.lb 5 ft.lb 100 in.lb

Fine scale X

J mm

0.2 N m 0.25 N m 0.5 N m 0.5 N m 1Nm 2Nm 2.5 N m 2 in.lb 2.5 in.lb 5 in.lb 10 in.lb 2 ft.lb

; ; ; , , , , ; ; ; , ,

‘

730NR

b mm

h mm

28 28 28 28 28 28 30.6 28 28 28 28 28

23 23 23 23 23 23 25.6 23 23 23 23 23

L mm

LF mm

SF mm

R g

€

275 330 386 421 467 607 890 275 330 386 467 607

226 280.5 336 379 424.5 564.5 848 226 280.5 336 424.5 564.5

17.5 17.5 17.5 25 25 25 25 17.5 17.5 17.5 25 25

737 831 988 1128 1264 1655 3231 737 831 988 1264 1655

222.00 242.00 255.00 268.00 291.00 423.00 633.00 243.00 241.00 261.00 291.00 423.00

Torque wrenches with permanently installed ratchet

in sturdy plastic case (size 65 in steel case). Deviation of indication ± 4%.

730NR/20QR FK

‘

Code ‘

96 50 21 05 96 50 21 10 96 50 21 20 96 50 21 40 96 50 21 65 1

‘

size

166

Fine scale D X ''

5QR FK* 10–50 N m 7–37 ft.lb 5 N m 1 ft.lb 0.25 N m 10QR FK* 20–100 N m 15–75 ft.lb 10 N m 2.5 ft.lb 0.5 N m 20QR FK* 40–200 N m 30–150 ft.lb 10 N m 5 ft.lb 1Nm 40 FK 80–400 N m 60–300 ft.lb 20 N m 10 ft.lb 2Nm 65 FK 130–650 N m 100–480 ft.lb 50 N m 20 ft.lb 2.5 N m

* Ratchet has quick-release safety lock Ü ü ‘

3/8 1/2 1/2 3/4 3/4

b1 b2 h1 mm mm mm

h2 mm

L mm

LF mm

R Rg g with box

28 28 28 28 30.6

14.5 14.5 18 30.7 30.7

372.5 428.5 526 657 940

291 346.5 438 564.5 915

961 1129 1589 2122 3698

29 29 41 50 50

23 23 23 23 25.6

1386 1554 2014 2657 6188

€ 357.85 369.85 413.85 564.30 842.10

Service MANOSKOP® 730 • cut-out type – 182 176 • mount for insert/shell tools • QuickRelease safety lock (sizes 5–65) • rapid setting (sizes 2–65) • dual stop signal • twin scales N m/ft.lb and N m/in.lb (sizes 5–80) • the measuring element is only under load while force is being applied, no need for manual reset to zero • can be applied for either clockwise or anticlockwise tightening by turning the inserts over • any force applied to the tool after the ‘click’ or applied in the opposite direction to the current function – e.g. forcible loosening of a jammed screw - does not act on the trigger mechanism and cannot cause damage to it. • calibration using perfectControl calibrating unit No 7794 or calibration system No 7706. Adjustment without disassembly. • with certificate • display deviation value ± 4% 730

Basic wrenches with tool carrier for insert tools

730/2 ‘

Code

size

‘

50 18 00 02 50 18 00 04 50 58 00 01 50 58 00 02 50 58 00 04 1

2 4 a/2-1 a/2 a/4

4–20 N m 8–40 N m 17.5–87.5 in.lb 30–175 in.lb 70–350 in.lb

0.5 N m 1Nm 2.5 in.lb 5 in.lb 10 in.lb

‘

J mm

b mm

h mm

L mm

; ; ; ; ;

27.5 27.5 27.5 27.5 27.5

23 23 23 23 23

178.5 222 178.5 178.5 222

LF mm 174 218 174 174 218

SF mm

R g

€

17.5 17.5 17.5 17.5 17.5

315 395 315 315 395

194.00 199.00 228.00 205.00 209.00

730/5

Ü ü

‘

Code

size

‘

50 18 00 05 5 50 18 00 10 10 50 18 00 12 12 50 18 00 20 20 50 18 00 40 40 50 18 00 65 65 50 58 00 05 a/5 50 58 00 10 a/10 50 58 00 12 a/12 50 58 00 20 a/20 1

W 6–50 N m 20–100 N m 25–130 N m 40–200 N m 80–400 N m 130–650 N m 6–50 N m 20–100 N m 25–130 N m 40–200 N m

W 5–36 ft.lb 15–72.5 ft.lb 20–95 ft.lb 30–145 ft.lb 60–300 ft.lb 100–480 ft.lb 50–440 in.lb 180–880 in.lb 225–1150 in.lb 350–1750 in.lb

J mm

2Nm 2.5 N m 2.5 N m 5Nm 10 N m 20 N m 2Nm 2.5 N m 2.5 N m 5Nm

1 ft.lb 2.5 ft.lb 2.5 ft.lb 5 ft.lb 10 ft.lb 20 ft.lb 10 in.lb 20 in.lb 25 in.lb 50 in.lb

; ; , , , , ; ; , ,

‘

730

b mm 28 28 28 28 28 30.6 28 28 28 28

h mm 23 23 23 23 23 25.6 23 23 23 23

L mm 315 370 410 455 590 875 315 370 410 455

LF mm

SF mm

R g

€

288 343 390 435 570 855 288 343 390 435

17.5 17.5 25 25 25 25 17.5 17.5 25 25

805 965 1100 1250 1880 3280 805 965 1100 1250

209.00 222.00 233.00 252.00 369.00 549.00 208.00 228.00 245.00 252.00

Basic wrench with tool carrier for shell tools

‘

Code ‘

50 18 00 80

size

80 160–800 N m

K mm

b mm

h mm

L mm

LF mm

SF mm

R g

120–600 ft.lb

20 N m

20 ft.lb

24.5x28

970

990

5377

€ 776.00

‘

Use shell adaptor No 7370/80 to make 14 x 18 mm insert tools fit. ‘

167

Torque tools Standard MANOSKOP® 720Nf • cut-out type • easy setting • dual stop signal • twin scales N m/ft.lb • anticlockwise torquing thanks to swap-over square drive • all the sensitive components are protected by the sturdy tubular steel housing in the U-shaped aluminium profile • calibration using perfectControl calibrating unit No 7794 or calibration system No 7706. Adjustment without disassembly. • with certificate • display deviation value ± 4% 720Nf

Torque wrench with square drive

‘

Code

size

‘

50 19 00 81

160–800 N m 120–600 ft.lb

D ''

b mm

h mm

L mm

LF mm

SF mm

R g

20 N m

20 ft.lb

3/4

1034

938

6102

€ 763.00

‘

Standard MANOSKOP® 721 • cut-out type • rapid setting • dual stop signal • twin scales N m/ft.lb • the measuring element is only under load while force is being applied, no need for manual reset to zero • any force applied to the tool after the ‘click’ or applied in the opposite direction to the current function – e.g. forcible loosening of a jammed screw - does not act on the trigger mechanism and cannot cause damage to it. • all the sensitive components are protected by the sturdy tubular steel housing • calibration using perfectControl calibrating unit No 7794 or calibration system No 7706. Adjustment without disassembly. • with certificate • display deviation value ± 4% 721

Torque wrenches with reversible ratchet

‘

Code

size

‘

50 20 00 05 50 20 00 15 50 20 00 30

5 15 30

W 6–50 N m 30–150 N m 60–300 N m

W 5–36 ft.lb 25–110 ft.lb 50–220 ft.lb

X 2Nm 5Nm 10 N m

X 1 ft.lb 5 ft.lb 10 ft.lb

‘

size 30 with push through square drive (spare square drive, refer to page 183) ‘

168

D ''

b1 mm

b2 mm

h1 mm

h2 mm

L mm

LF mm

R g

€

3/8 1/2 1/2

28 28 28

27.5 41 44

23 23 23

14.5 18 27.5

352 452 553

293 387 486

900 1305 1720

253.00 261.00 313.00

Standard MANOSKOP® 721Nf • cut-out type • easy setting • dual stop signal • twin scales N m/ft.lb • anticlockwise torquing thanks to swap-over square drive • all the sensitive components are protected by the sturdy tubular steel housing in the U-shaped aluminium profile • calibration using perfectControl calibrating unit No 7794 or calibration system No 7706. Adjustment without disassembly. • with certificate • display deviation value ± 4% 721Nf

Torque wrenches with ratchet

721Nf/80

721Nf/100

‘

Code

size

‘

50 20 00 81 96 50 20 01

80 100

D ''

160–800 N m 200–1000 N m

120–600 ft.lb 150–725 ft.lb

20 N m 25 N m

20 ft.lb 25 ft.lb

3/4 3/4

b1 mm

b2 mm

h mm

L mm

LF mm

46.5 46.5

76 76

42 42

1051 1504

938 1365

R g

€

7222 980.00 7005 1166.50

‘

i BITS

1299

for inside hexagon screws, for operating the adjusting screws on torque wrenches No 720, 721, 730 and 730N. ‘

Code ‘

08 09 00 02

B outside mm E 2

C 6.3

L mm

R g

€

1/4

3.10

‘

outside E DIN 3126/ISO 1173 ‘

169

Torque tools Industrial MANOSKOP® 755 • For work on production lines or series production. No setting scale; have to be set with a tester such as the STAHLWILLE No 7707 W tester or the No 7794, No 7706 calibration system. • cut-out type – 182 176 • mount for interchangeable insert tools • dual stop signal • particularly light and easy to handle • handle and shank are made of square tubular steel • any force applied to the tool after the ‘click’ or applied in the opposite direction to the current function (up to the max. of the wrench’s range) does not act on the trigger mechanism and cannot cause damage to it. • anticlockwise torquing thanks to swap-over insert tools • with preset cut-out value on request (price on application) • display deviation value ± 4% Industrial MANOSKOP®

755R/1

Torque wrench with built-in ratchet, irrespective of the point of application of force, dual stop signal and cut-out. Deviation of indication ± 4%. Cut-out setting with aid of Setting Gauge.

‘

Code ‘

50 10 00 01

D ''

b mm

h mm

L mm

R g

€

1.5–12.5 N m

1.0–9.0 ft.lb

1/4

173.5

335

171.00

‘

755

Basic wrenches with tool carrier for insert tool

5 ‘

Code

size

4 10 20 30

4–40 N m 20–100 N m 40–200 N m 60–300 N m

4–30 ft.lb 15–74 ft.lb 30–147 ft.lb 40–220 ft.lb

‘

50 01 00 04 50 01 00 10 50 01 00 20 50 01 00 30 ‘

J mm

b mm

h mm

L mm

LF mm

SF mm

R g

€

; ; , ,

22 28 28 28

18 24 24 24

201 318 457 609

172 289 435 587

17.5 17.5 25 25

522 635 1060 1210

107.00 114.00 128.00 136.00

Inlays for plastic case

Plastic case, empty ‘

for safe storage and transport of torque wrenches (please order inlays separately). Supplied without torque wrench.

Code 83 07 10 04

‘

Code

for torque wrenches No

L mm

R g

‘

81 37 00 02

81 37 00 03 ‘

170

for torque wrenches No

R g

€

4.45

113

6.80

‘

7301 712R/6; 713R/6; 721/5; 721/15; 730/5; 730/10; 730/12; 730/20; 730a/5; 730a/10; 730a/12; 730a/20; 730N/5; 730N/10; 730N/12; 730N/20; 730Na/5; 730Na/10; 730Na/20; 730D/10 550 7302 713R/20; 721/30; 730/40; 730N/40; 730Na/40; 730D/20 680

€

83 07 10 02 ‘

425

15.40

535

17.50

712R/6; 713R/6; 721/5; 721/15; 730/5; 730/10; 730/12; 730/20; 730a/5; 730a/10; 730a/12; 730a/20; 730N/5; 730N/10; 730N/12; 730N/20; 730Na/5; 730Na/10; 730Na/20; 730D/10 713R/20; 721/30; 730/40; 730N/40; 730Na/40; 730D/20

Indicating torque wrenches Electronic angle-controlled torque wrench Sensotork® 713 • simple, flexible operation thanks to operator guidance on large-format display • very broad measuring range (5% to 100% of rated value) • supplied with insert tool reversible ratchet, more insert tools 176 – 182 • QuickRelease safety lock • for clockwise and anticlockwise torquing • measurements independent of the point of application of force (sizes 6 and 20) • units of measurement: N m, ft.lb, in.lb • advance warning points programmable for visual, tactile and acoustic signals • torque and angle are simultaneously visible • convenient angle measurement across a very wide angle range without a reference arm • insert tool lengths can be individually set • maintenance friendly due to easy adjustment and automatic reminder of next calibration date • repeated joints can be collated to form a single menu-guided sequence • individual identification markings possible • password protection to prevent inadvertent changes and make the tool tamper-proof • meets requirements of DKD-R 3-7, Class 2 • works certificate in accordance with DIN EN 10204 • in sturdy plastic case (size 40 in tough steel case) • supplied with three 1.5 V AA batteries. AA/LR6, 1.2 V NiMH rechargeable cells may also be used. • fully automated calibration (torque) using perfectControl calibrating unit No 7794-2. Adjustment without disassembly. • display deviation value for angle ± 1% • display deviation value ± 1%

Electronic angle-controlled torque wrenches Sensotork®

713R

Ü ü

‘

Code

size

‘

96 50 16 06 96 50 16 20 96 50 16 40

6 20 40

W 3–60 N m 10–200 N m 20–400 N m

D ''

J mm

b mm

h mm

L mm

R g

Rg with box

2.5–44 ft.lb 7–148 ft.lb 15–296 ft.lb

3/8 1/2 3/4

; , ,

50 50 50

33.5 33.5 33.5

378 608 838

856 1552 2332

1500 2430 5555

‘

€ 1194.00 1264.00 1386.00

Electronic torque wrench Sensotork 712® 712R/6

Electronic torque wrench Sensotork®

Ü ü

Electronic torque wrench with option of attaching interchangeable insert tools, same design as No 713 but without angle function.

‘

Code ‘

96 50 15 06 ‘

D ''

J mm

b mm

h mm

L mm

R g

Rg with box

3–60 N m

2.5–44 ft.lb

3/8

;

33.5

378

856

1500

€ 1016.00 171

Torque tools Accessories for electronic angle-controlled torque wrench Sensotork® No 713 and electronic torque wrench Sensotork® No 712 7759-1

USB adaptor, jack cable and software Sensomaster for No 712R, 713R

for documenting and managing readings on a PC and carrying out statistical analyses. • Read out stored wrench data and joint readings: Joint identifier, Tool serial number, Target torque or target angle, Torque level at which the tool cuts out, Tightening torque or angle reached, Tolerances, Joint evaluation • Storage of joint data in a database • Delete or print highlighted joints from the database • Export displayed joint data to a CSV file (compatible with Excel) • 13 languages • User management • Define new PIN • Delete joint data stored in wrench System requirements: • PC • Microsoft Windows 98 SE or compatible operating system with USB support • USB connection • Installed ODBC driver for Access data ‘

Code

L m

R g

€

1.5

137

120.40

‘

96 58 36 25 ‘

MANOSKOP® 71

– 182 176 • indicating type • mount for interchangeable shell tools • all 14 x 18 mm insert tools can also be used with insert tool adaptor No 7370/80 (max. 650 N m) • trailing pointer dial • twin scales N m/ft.lb • scale is made of luminescent light yellow special film enabling clear readings even in poor light conditions • handle with integrated force compensator • measuring element is a bending plate housed in the handle • with overload protection • can be applied for either clockwise or anticlockwise tightening by turning the wrench over • calibration using perfectControl calibrating unit No 7794 or calibration system No 7706. Adjustment without disassembly. • with certificate • display deviation value ± 4%

71/80

MANOSKOP® 71 with integrated force compensator

‘

Code ‘

50 03 00 80 ‘

172

K mm

b mm

h mm

L mm

LF mm

SF mm

R g

160–800 N m

120–600 ft.lb

10 N m

10 ft.lb

24.5x28

1048

1050

2360

€ 876.00

MANOSKOP® 71 with permanently installed reversible ratchet • indicating type • trailing pointer dial • twin scales N m/ft.lb • scale is made of luminescent light yellow special film enabling clear readings even in poor light conditions • additional protection for the gauge by the protective ring • not for anticlockwise measurement • calibration using perfectControl calibrating unit No 7794 or calibration system No 7706. Adjustment without disassembly. • with certificate • display deviation value ± 4% 71aR/80

MANOSKOP® 71 with integrated force compensator

‘

D ''

b mm

h mm

L mm

LF mm

R g

100–600 ft.lb

160–800 N m

10 ft.lb

10 N m

3/4

1152

1060

4280

Code ‘

50 45 00 80

€ 1028.00

‘

Friction gauge • indicating type • permanently installed square drive • trailing pointer dial • no “needle wobble” during measurements • lighter construction due to use of aluminium • with certificate • display deviation value ± 4% 73Nm/15

Friction gauge

‘

Code ‘

50 24 00 15

D ''

b mm

h mm

L mm

LF mm

SF mm

R g

€

2–15 N m

0.5 N m

1/2

298.5

250

775

350.00

‘

173

Torque tools

Torque screwdrivers TORSIOMAX 775 • cut-out type • for torque-controlled bolt tightening in the cN m and in.lb ranges • for one-off or production runs • measuring element is a screw compression spring • anticlockwise and clockwise tightening • with 1/4'' internal hex drive (F 6.3 DIN 3126/ISO1173) • infinitely variable via micrometer scale (twist scale) • disengaging clutch coupling prevents the preset value being exceeded • the shape of the handle and its surface texture ensure safe and accurate transmission of torque • insert tools: For all 1/4'' hex E 6.3, Phillips-head screws, POZIDRIV / SUPADRIV®, straight-slot, TORX®, hex BITS (see pp. 153, 154). For very small joints, BITS with a 4 mm hex drive and an adapter No 3115/2 for BITS screwdriver inserts, Type C4, and external hex 1/4'' (E 6.3 DIN 3126/ISO 1173) are required (refer to pages 148, 151). • display deviation value ± 6%

775

Torque screwdriver TORSIOMAX

775/3

775/12

775/30

775/50

775/100

‘

Code

size

‘

51 06 00 03 51 06 00 12 51 06 00 30 51 06 00 50 51 06 01 00 51 46 00 03 51 46 00 12 51 46 00 50 1

31) 122) 302) 502) 1003) a/31) a/122) a/502)

W 2–30 cN m 20–120 cN m 40–300 cN m 100–500 cN m 400–1000 cN m 0.2–3 in.lb 2–12 in.lb 10–50 in.lb

inside b

L mm

R g

€

0.2 cN m 1 cN m 1 cN m 2.5 cN m 5 cN m 0.02 in.lb 0.1 in.lb 0.25 in.lb

F 6.3 F 6.3 F 6.3 F 6.3 F 6.3 F 6.3 F 6.3 F 6.3

105 157 160 205 235 105 157 205

210 195 215 455 770 210 350 606

224.00 228.00 265.00 272.00 417.00 242.00 246.00 291.00

‘

) with a swivelling handle-end to improve tool control; and with a clamping screw for locking the preset. ) with an additional locking mechanism to prevent the selected torque being inadvertently adjusted. 3 ) with screw-on handles for increasing the force applied for large torques. 2

‘

Note! Torque tightening tools are measuring instruments. They must be regularly calibrated with suitable instruments and adjusted accordingly (see DIN EN ISO 6789, 5.3 Recalibrating). ‘

174

TORSIOMETER 760 • indicating type • the measuring element is a torsional leaf spring • clockwise tightening (with trailing pointer) and anticlockwise tightening • with 1/4'' internal hex drive (F 6.3 DIN 3126) • comparative scale in in.lb and cursor • inserts and adaptors with external hex E 6.3 (1/4'') DIN 3126/ISO 1173 are securely held and firmly controlled in the mounting shaft (for BITS screwdriver inserts, refer to pages 153, 154). • to attach 1/4'' sockets, please order adaptor No 3115 (refer to page 152). • display deviation value ± 4% 760

Torque screwdrivers TORSIOMETER

‘

Code

size

inside b

L mm

R g

€

7.5 15 30 60

15–75 cN m 30–150 cN m 60–300 cN m 120–600 cN m

1.5–6.5 in.lb 3–13 in.lb 6–26 in.lb 12–52 in.lb

2.5 cN m 5 cN m 10 cN m 20 cN m

F 6.3 F 6.3 F 6.3 F 6.3

185 185 185 185

225 225 230 230

217.00 229.00 222.00 231.00

‘

51 04 00 07 51 04 00 15 51 04 00 30 51 04 00 60 ‘

175

Which insert tool for which torque wrench? 713R

Electronic angle-controlled Torque Wrench Sensotork®, indicating

730D

Service/Industrial MANOSKOP®, cut-out, indicating

730N

Service MANOSKOP®, cut-out 40

60 80

0 1

0 30 40 50 60

Service MANOSKOP®, cut-out

730

klick

MANOSKOP 730 DBGM

755

Industrial MANOSKOP®, cut-out

Torque Wrench MANOSKOP ®, indicating

GERMANY

Nr. 730/5 6-50 Nm 5-35 ft. lb

Nm ft. lb

10 5

5 size 02 04 05 06 10 12 20 30 40 65 80

size a/20 a/40 a/50 – a/10 a/12 a/20 – a/40 – –

size 02 04 05 06 10 12 20 30 40 65 80

size a/20 a/40 a/50 – a/10 a/12 a/20 – a/40 – –

176

No 725QR/ 725QR/ 725QR/ 725QR/ 725B 725L/5 725/4 735/5 735/10 735/20 735/40 735/65 735/80 734/4 734/5 734/10 734/20 734/40 734/80 20 10 5 mm 4 D D D D D C C C C C

No mm D D D D D C C C C C 24.5x28

24.5x28

734F

734L/5 731/10 731/40 731/80 732/10 732/40 732/80

732G/ 10

732TX/ 732TX/ 733/10 736/10 736/40 737/10 737/40 40 10

Insert/shell tools for torque wrenches Output square drive D in accordance with DIN 3120 725QR

725/4

Ratchet insert tool

reversible, 22 teeth.

QuickRelease ratchet insert tool

Ü ü

‘

reversible, with QuickRelease safety lock, size 4: 22 teeth, sizes 5 and 10: 30 teeth, size 20: 36 teeth.

Code

D ''

J mm

b mm

h mm

S mm

R g

€

1/4

;

14.5

17.5

59.00

‘

58 25 40 04 ‘

735

Ratchet insert tools, fine tooth

reversible, 60 teeth. ‘

size

D ''

J mm

58 25 30 04 4 58 25 30 05 5 58 25 30 10 10 58 25 30 20 20

1/4 3/8 1/2 1/2

; ; ; ,

Code ‘

‘

b h mm mm 22 29 29 41

S mm

14.5 14.5 14.5 18

17.5 28* 28* 38.5*

R g

€

60 130 141 325

76.00 77.50 79.50 85.50

* Caution! Modified settings on torque wrench (refer to note on page 196). ‘ ‘

725B

Code

Bit ratchet insert tool

size

D ''

‘

reversible, with inside hexagon, 1/4'' or 5/16'', DIN 3126/ISO 1173 D 6.3 or D8, for direct acceptance of bits 1/4'' or 5/16'' outside hexagon C 6.3 (size 4: 22 teeth, size 5: 30 teeth). Internal hex drive with a collar-thrust spring (registered design). Bits are easy to insert, lock securely in position and can be removed just as easily; even hex bits with a wide groove (Type E, DIN 3126/ISO 1173). Supplied without bits.

3/8 1/2 1/2 3/4

58 25 00 05 5 58 25 00 10 10 58 25 00 20 20 58 25 00 40 40 58 25 00 65** 65 U 3/4 1

‘

J mm

b mm

h mm

S mm

R g

€

; ; , , ,

33 33 43 50 58

24 24 26 32 36

17.5 17.5 25 25 30*

155 147 302 510 701

62.00 64.00 68.00 101.00 117.00

* Caution! Modified settings on torque wrench (refer to note on page 196). ** available from spring 2012 ‘

735/80

Ratchet shell tool

with push through square drive, 30 teeth. ‘

Code

size

‘

58 25 50 04 58 25 50 05

4 5

J mm

b mm

h mm

S mm

R g

€

; ;

22 29

14 17.5 14.5 28*

54 117

58.00 78.50

inside b '' 1/4 5/16

‘

* Caution! Modified settings on torque wrench (refer to note on page 196). ‘

Code

D ''

K mm

b mm

h mm

S mm

R g

€

3/4

24.5x28

2000

356.00

‘

725L/5

58 25 00 80

Ratchet insert tool

‘

reversible, 30 teeth. Caution! Modified settings on torque wrench (refer to note on p. 196). This ratchet insert tool has the same extension length as ring insert tool No 732G/10 (see p. 180) and square drive insert tool No 734L/5 (see p. 178).

‘

Code

D ''

J mm

b mm

h mm

S mm

R g

€

3/8

;

27.5

14.5

164

85.00

‘

58 15 10 05 ‘

177

Insert/shell tools 734

Square drive insert tools

731/10

Open ended insert tools

‘

Code

D size ''

‘

58 24 00 04 58 24 00 05 58 24 00 10 58 24 00 20 58 24 00 40 1

4 5 10 20 40

1/4 3/8 1/2 1/2 3/4

‘

734/80

J mm

b mm

; ; ; , ,

h mm

R g

S mm

‘

€

Code

A mm

J mm

b mm

h mm

S mm

R g

€

7 8 9 10 11 12 1) 13 14 15 16 17 18 19

; ; ; ; ; ; ; ; ; ; ; ; ;

22 22 26 26 26 30 30 35 35 38 38 42 42

5 5 5.5 5.5 5.5 7 7 8 8 8.5 8.5 9 9

17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 20* 20*

40 39 38 42 41 43 48 52 51 58 60 71 74

28.40 27.10 28.40 26.40 26.40 27.10 26.40 26.40 26.40 26.40 26.40 26.40 26.40

‘

20 20 20 27 40

14 14 14 18 25

17.5 71 17.5 76 17.5 82 25 203 25 396

24.50 24.50 25.20 27.30 45.10

Square drive shell tool

58 21 10 07 58 21 10 08 58 21 10 09 58 21 10 10 58 21 10 11 58 21 10 12 58 21 10 13 58 21 10 14 58 21 10 15 58 21 10 16 58 21 10 17 58 21 10 18 58 21 10 19 1

‘

) For flare nuts of hydraulic pipes on French vehicles

‘

Code

D ''

K mm

b mm

h mm

S mm

R g

3/4

1200

‘

58 24 00 80 ‘

‘

€

731a/10

146.00

Open ended insert tools

‘

734F

Square drive insert tools

Code

A ''

‘

58 61 10 16 58 61 10 20 58 61 10 24 58 61 10 28 58 61 10 32 58 61 10 34 58 61 10 36 58 61 10 38 58 61 10 40

with permanently attached, captive square drive.

1 ‘

Code

D size ''

‘

58 24 10 04 58 24 10 05

4 5

1/4 3/8

‘

734L/5

J mm

b mm

h mm

S mm

R g

€

; ;

22 22

14 14

17.5 17.5

72 75

31.90 31.90

1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4

‘

731/40

J mm

b mm

h mm

S mm

R g

€

; ; ; ; ; ; ; ; ;

22 22 26 26 30 35 38 42 42

5 5 5.5 5.5 7 8 8.5 9 9

17.5 17.5 17.5 17.5 17.5 17.5 17.5 20* 20*

36 53 38 37 44 49 64 76 73

28.40 28.40 28.40 28.40 28.40 28.40 28.40 28.40 28.40

Open ended insert tools

Square drive insert tool

Caution! Modified settings on torque wrench (refer to note on p. 196). This square-drive insert tool has the same extension length as ring insert tool No 732G/10 (see p. 180) and ratchet insert tool No 725L/5 (see p. 177). ‘

Code

A mm

J mm

b mm

h mm

S mm

R g

€

13 14 15 16 17 18 19 21 22 24 25 27 30 32 34 36 38 41

, , , , , , , , , , , , , , , , , ,

30 35 35 38 38 42 42 50 50 53 53 60 66 66 66 74 74 82

7 8 8 9 9 10 10 11 11 12 12 13 14 14 14 15 15 15

25 25 25 25 25 25 25 25 25 25 25 30* 30* 32.5* 32.5* 32.5* 32.5* 36.5*

128 129 132 140 136 147 145 171 165 167 170 219 245 246 239 275 265 307

30.20 30.20 32.60 30.20 30.20 30.20 30.20 36.60 36.60 36.60 39.20 36.60 41.00 41.00 44.10 42.80 44.00 46.10

‘

Code

D ''

J mm

b mm

h mm

S mm

R g

3/8

;

141 54.50

‘

58 24 20 05 ‘

€

58 21 40 13 58 21 40 14 58 21 40 15 58 21 40 16 58 21 40 17 58 21 40 18 58 21 40 19 58 21 40 21 58 21 40 22 58 21 40 24 58 21 40 25 58 21 40 27 58 21 40 30 58 21 40 32 58 21 40 34 58 21 40 36 58 21 40 38 58 21 40 41 1

‘

* Caution! Modified settings on torque wrench (refer to note on page 196). ‘

178

731a/40

Open ended insert tools

732a/10

‘

Code

A ''

‘

58 61 40 28 58 61 40 32 58 61 40 34 58 61 40 36 58 61 40 38 58 61 40 40 58 61 40 42 58 61 40 44 58 61 40 46 58 61 40 48 58 61 40 52 1

7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1 1/8

‘

J mm

b mm

h mm

S mm

R g

€

, , , , , , , , , , ,

30 30 35 38 42 42 50 50 53 60 66

7 7 8 9 10 10 11 11 12 13 14

25 25 25 25 25 25 25 25 25 30* 30*

127 125 129 136 148 144 171 165 177 224 258

33.40 33.40 33.40 33.40 33.40 33.40 39.30 39.30 39.30 39.30 39.30

* Caution! Modified settings on torque wrench (refer to note on page 196). ‘

Ring insert tools

P ‘

Code

A ''

‘

58 62 10 16 58 62 10 20 58 62 10 24 58 62 10 28 58 62 10 32 58 62 10 34 58 62 10 36 58 62 10 38 58 62 10 40 58 62 10 42 58 62 10 44 1

1/4 5/16 3/8 1) 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8

‘

J mm

b mm

h mm

S mm

R g

€

; ; ; ; ; ; ; ; ; ; ;

13 14.2 17.2 18.5 21.5 22.5 26 28 30.5 33 34.5

8 8 9 9 11 11 12 13 13 15 15

17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5

36 37 37 40 53 52 54 58 58 68 69

29.20 29.20 29.20 29.20 29.20 29.20 29.20 29.20 29.20 30.80 30.80

731/80

) For Volvo aero-engines, types ''JAS''

Open ended shell tools

‘

732/40

Ring insert tools

P ‘

Code

A mm

K mm

b mm

h mm

S mm

R g

€

24 27 30 32 34 36 41 46 50 55 60

24.5x28

50 56 63 67 72 74 84 94 104 114 124

13 14 15 15 15 15 16 17 18 19 20

95 95 95 95 95 95 95 95 95 95 95

601 620 655 670 699 740 810 867 1010 1150 1330

145.00 145.00 147.00 147.00 147.00 151.00 151.00 154.00 157.00 162.00 165.00

‘

58 21 80 24 58 21 80 27 58 21 80 30 58 21 80 32 58 21 80 34 58 21 80 36 58 21 80 41 58 21 80 46 58 21 80 50 58 21 80 55 58 21 80 60 1

24.5x28 24.5x28 24.5x28 24.5x28 24.5x28 24.5x28 24.5x28 24.5x28 24.5x28 24.5x28

‘

732/10

Ring insert tools

‘

Code 58 22 40 13 58 22 40 14 58 22 40 15 58 22 40 16 58 22 40 17 58 22 40 18 58 22 40 19 58 22 40 21 58 22 40 22 58 22 40 24 58 22 40 27 58 22 40 28 58 22 40 30 58 22 40 32 58 22 40 34 58 22 40 36 58 22 40 41 1

A mm

J mm

b mm

h mm

S mm

R g

€

13 14 15 16 17 18 19 21 22 24 27 28 30 32 34 36 41

, , , , , , , , , , , , , , , , ,

22.5 23 24 25.5 27 29 30.5 33 34.5 37.5 42.5 45.5 46 47.5 52 54 60

11 11 11 12 12 13 13 15 15 15 17 19 19 19 19 19 20

25 25 25 25 25 25 25 25 25 25 25 25 25 25 28* 28* 30*

130 123 128 133 135 134 138 144 145 153 162 175 182 181 210 203 240

31.10 31.10 31.70 31.10 31.10 31.10 31.10 37.00 37.00 37.00 37.00 44.00 41.80 41.80 44.00 41.80 41.80

‘

* Caution! Modified settings on torque wrench (refer to note on page 196). ‘

‘

Code

A mm

J mm

b mm

h mm

S mm

R g

€

7 8 10 11 12 13 14 15 16 17 18 19 21 22

; ; ; ; ; ; ; ; ; ; ; ; ; ;

13 14.2 17.2 18.5 20.5 21.5 22.5 24.5 26 27 28 30.5 33 34.5

8 8 9 9 11 11 11 12 12 13 13 13 15 15

17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5

37 40 44 41 49 55 52 52 54 59 56 65 71 74

29.40 28.60 28.00 29.40 29.40 28.00 29.40 28.60 28.00 28.00 28.00 28.00 29.40 28.00

‘

58 22 10 07 58 22 10 08 58 22 10 10 58 22 10 11 58 22 10 12 58 22 10 13 58 22 10 14 58 22 10 15 58 22 10 16 58 22 10 17 58 22 10 18 58 22 10 19 58 22 10 21 58 22 10 22 1

‘

732a/40

Ring insert tools

‘

Code

A ''

‘

58 62 40 32 58 62 40 34 58 62 40 36 58 62 40 38 58 62 40 40 58 62 40 42 58 62 40 44 58 62 40 46 58 62 40 48 1

‘

1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16

J mm

b mm

h mm

S mm

R g

€

, , , , , , , , ,

22.5 23 25.5 29 30.5 33 34.5 37.5 41

11 11 12 13 13 15 15 15 17

25 25 25 25 25 25 25 25 25

122 122 134 132 138 142 147 151 160

35.80 34.20 34.20 34.20 34.20 40.80 40.80 40.80 40.80

179

Insert/shell tools 732G/10

Ring insert tools

732a/80

P Q

Ring shell tools

P ‘

Caution! Modified settings on torque wrench (refer to note on p. 196). This insert tool has the same extension length as insert tool No 725L/5 (see p. 177) and square-drive insert tool No 734L/5 (see p. 178); HPQ high performance steel, gunmetal finish.

A ''

Code

K mm

b mm

h mm

S mm

R g

€

24.5x28

36 40.5

14 14

95 95

604 608

165.00 165.00

‘

15/16 1 1/16

58 62 80 46 58 62 80 50

) )

‘

) for jet engine pins (Airbus A320/A321)

‘

TORX® insert tools

732TX/10 ‘

Code

A mm

J mm

b mm

h mm

S mm

R g

€

7 8 9 10 13

; ; ; ; ;

11.5 12.4 14 15.6 19.3

6 6 8 8 9.2

45 45 45 45 45

31 33 40 44 60

27.60 27.60 27.60 27.60 28.50

‘

58 62 00 07 58 62 00 08 58 62 00 09 58 62 00 10 58 62 00 13 1

‘

Code

size

J mm

b mm

h mm

S mm

R g

€

E6 E8 E10 E12 E14

; ; ; ; ;

13 14.2 17.2 18.5 21.5

8 8 9 9 11

17.5 17.5 17.5 17.5 17.5

40 45 45 50 60

28.00 28.00 28.00 28.00 28.00

‘

732aG/10

58 29 10 06 58 29 10 08 58 29 10 10 58 29 10 12 58 29 10 14

Ring insert tools

P Q

‘

TORX® insert tools

732TX/40

‘

Code

A ''

‘

58 62 12 16 58 62 12 20 58 62 12 24 58 62 12 28 58 62 12 32 58 62 12 34 58 62 12 36 1

1/4 5/16 3/8 7/16 1/2 9/16 5/8

‘

J mm

b mm

h mm

S mm

R g

; ; ; ; ; ; ;

10.4 12.4 14.9 17 19 21 23

6 6 8 8 9.2 9.2 12

45 45 45 45 45 45 45

28 31 42 43 58 58 74

€ 29.00 29.00 29.00 29.90 29.90 27.20 29.90

Code

size

J mm

b mm

h mm

S mm

R g

€

E14 E18 E20 E24

, , , ,

22.5 24 29 30.5

11 11 13 13

25 25 25 25

130 135 150 150

37.00 37.00 37.00 41.80

‘

58 29 40 14 58 29 40 18 58 29 40 20 58 29 40 24

for assembling and dismantling aero-engines. ‘

732/80

‘

Ring shell tools

‘

733/10

Open ring insert tools

‘

Code

A mm

K mm

b mm

h mm

S mm

R g

€

24 27 30 32 34 36 41 46 50 55 60

24.5x28

36 40.5 46 49 52 54 61 66 75 84 93

15 15 16 16 17 17 18 19 20 21 22

95 95 95 95 95 95 95 95 95 95 95

605 610 630 635 650 650 675 720 803 889 995

148.00 148.00 152.00 152.00 152.00 155.00 162.00 158.00 158.00 160.00 160.00

‘

58 22 80 24 58 22 80 27 58 22 80 30 58 22 80 32 58 22 80 34 58 22 80 36 58 22 80 41 58 22 80 46 58 22 80 50 58 22 80 55 58 22 80 60 1

‘

24.5x28 24.5x28 24.5x28 24.5x28 24.5x28 24.5x28 24.5x28 24.5x28 24.5x28 24.5x28

‘

Code

A mm

J mm

b mm

h mm

W mm

S mm

R g

€

10 11 12 13 14 16 17 18 19 21 22 24

; ; ; ; ; ; ; ; ; ; ; ;

21.5 22.5 24.5 26 27 30.5 31.5 33 34 38.5 39.5 40

11 11 12 12 13 13 13 15 15 15 15 15

7.1 8.6 9 10 11 13 14 14.8 15.8 16.2 17 18

17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 20* 20* 20*

57 55 59 55 60 65 64 74 80 88 92 75

30.30 30.30 30.30 30.30 30.30 31.30 30.30 31.30 30.30 31.30 30.30 30.30

‘

58 23 10 10 58 23 10 11 58 23 10 12 58 23 10 13 58 23 10 14 58 23 10 16 58 23 10 17 58 23 10 18 58 23 10 19 58 23 10 21 58 23 10 22 58 23 10 24 1

‘

* Caution! Modified settings on torque wrench (refer to note on page 196). ‘

180

733a/10

Open ring insert tools

7370/40

Ü ü

P ‘

Code

A ''

‘

58 63 10 24 58 63 10 28 58 63 10 32 58 63 10 34 58 63 10 36 58 63 10 38 58 63 10 40 1

Adaptor

3/8 7/16 1/2 9/16 5/8 11/16 3/4

‘

736

J mm

b mm

h mm

W mm

S mm

R g

€

; ; ; ; ; ; ;

21.5 22.5 26 27.5 30.5 33 34

11 11 12 13 13 15 15

7.1 8.6 9.5 11 12.7 14 15.8

17.5 17.5 17.5 17.5 17.5 17.5 17.5

55 56 58 59 61 48 76

32.80 32.80 32.80 32.80 32.80 33.70 33.70

BIT holder insert tools

for using insert tools with an outer square drive of 9 x 12 mm on torque wrenches with an internal square drive of 14 x 18 mm. Caution! Modified settings on torque wrench (refer to note on p. 196).

‘

D mm

Code ‘

58 29 00 40 ‘

a mm

, ;

7370/10-2

b mm

h mm

S mm

R g

€

21.5

115

72.50

Adaptor

for use with insert tools with a lateral dovetail profile in torque wrenches with 9 x 12 mm internal square drives. Caution! Modified settings on torque wrench (refer to note on p. 196).

‘

Code

size

‘

58 26 10 10 58 26 26 10 58 26 10 40

inside b

10 D8 10-1 D 6.3 40 D8

'' 5/16 1/4 5/16

‘

J mm

b mm

h mm

S mm

R g

€

; ; ,

16 14 16

12.5 17.5 10 17.5 12.5 25

47 45 112

28.50 29.00 38.90 ‘

inside b DIN 3126/ISO 1173 ‘

Code ‘

737

58 29 00 12

Blank end insert tools

‘

gunmetal finish. To prevent damage from excessive temperatures, the locking pin, spring and washer are not fitted until the welding work has been completed. Instructions are supplied.

7370/40-2

D mm

b mm

h mm

S mm

R g

€

;

23.5

9.5

55.50

Adaptor

for use with insert tools with a lateral dovetail profile in torque wrenches with 14 x 18 mm internal square drives. Caution! Modified settings on torque wrench (refer to note on p. 196).

‘

Code

size

Welding surface h x b mm

J mm

H mm

L R mm g

10 40

8 x 14 11 x 25

; ,

14.5 21.5

8 12

‘

58 27 00 10 58 27 00 40 ‘

7370/10

35 98

€ 21.50 27.00

‘

Code

Adaptor

‘

58 29 00 42

Ü ü

‘

D mm

b mm

h mm

S mm

R g

31.5

9.5

34.6

138 62.00

€

for using insert tools with an outer square drive of 14 x 18 mm on torque wrenches with an internal square drive of 9 x 12 mm. Caution! Modified settings on torque wrench (refer to note on p. 196).

‘

Code ‘

58 29 00 10 ‘

D mm

a mm

; ,

b mm

h mm

S mm

R g

€

30.5

114

45.40

181

Insert/shell tools 7370/40-1

Adaptor

Tool holder

for using shell tools with an internal square drive of 24.5 x 28 mm on torque wrenches with an internal square drive of 14 x 18 mm. Caution! Modified settings on torque wrench (refer to note on p. 196).

with tool carrier to receive insert tools (without torque function). ‘

Code

‘

18 20 00 01 18 21 00 01

1820 1821

‘

J mm

L mm

R g

€

; ,

382.5 575

490 720

45.40 58.50

7380N/7385N Torque angle gauges ‘

Code ‘

58 29 00 41 ‘

7370/80

D mm

b mm

h mm

R g

24.5x28

251 54.50

€

Shell adaptor

for attaching 14 x 18 mm insert tools. Caution! Modified settings on torque wrench (refer to note on p. 196).

registered design, for angle controlled bolt/screw tightening, with static read-off point. Read-off possible from any angle thanks to a pair of angled scales. Removable magnet for attaching sockets with 1/2'' internal square drive. For use in conjunction with tightening tools such as Service MANOSKOP® No 730N. Since this tightening method requires a pre-determined snug torque to be applied, it is essential to choose a torque wrench covering both snug torque as well as maximum torque required to reach the recommended tightening angle. Whether 1/2'' or 3/4'' sq.dr. Torque Angle Gauge is used depends upon the square drive of the appropriate torque wrench employed.

‘

Code

a mm

b mm

h mm

S mm

R g

€

24.5x28

281

145.00

‘

58 29 00 80 ‘

‘

a D b h L R '' '' W X mm mm mm g

54 01 00 01 7380N 54 01 00 02 7385N

1/2 3/4

± 360° ± 360°

2° 2°

€

78 43 416 494 108.00 78 76 416 720 139.00

‘

730R/40/32 Torque wrench set

‘

Code

32 pieces, in steel case, for general service work. Content: 1 SERVICE-MANOSKOP® No 730/40, 80–400 N m 1 ratchet insert tool No 735/20, reversible, 1/2'' D-drive 1 square drive insert tool No 734/20, 1/2'' D-drive 7 o/e insert tools No 731/40, sizes 13, 15, 17, 19, 22, 27, 30 mm 1 No 3731/40 size 24 mm; 7 ring insert tools No 732/40, sizes 13, 15, 17, 19, 22, 24, 27 mm 10 sockets, bi-hexagon No 50, sizes 13, 14, 15, 17, 19, 22, 24, 25, 30, 32 mm 4 accessories, 1/2'' a-drive: 1 T-handle No 506 1 extension 255 mm No 509/10 1 extension 130 mm No 509/5 1 extension 55 mm No 509/2 ‘

Code

R g

9739

‘

96 50 20 53

€ 1235.20

‘

Ratchet spare parts sets for torque wrenches 721/5–80 ‘

Code

Content

59 19 10 05

7210/5

19 04 00 00

5120 + 7210/15

59 19 10 30

7210/30

59 19 10 80

7210/80

For ratchet/torque wrench No 721/5: 1 pinion, 1 pawl, 1 switch-over button and pin, 1 ball, 2 compression springs, 2 screws For ratchet/torque wrench No 721/15: 1 pinion, 1 pawl, 1 lever, 1 lever pin, 1 ball, 2 compression springs, 2 screws For ratchet/torque wrench No 721/30: 1 pinion, 1 pawl, 1 lever, 1 lever pin, 1 ball, 2 compression springs, 2 screws For ratchet/torque wrench No 721Nf/80, 721Nf/100, 735/80: 1 pinion, 2 pawls, 2 spring contact points, 2 compression springs

R g

€

24.40

127

25.80

134

36.10

448

132.00

‘

182

7350/10

Sets of spare parts for ratchet insert tools No 725QR, No 735 4150QR

Content: 1 pinion, 1 pawl, 1 switching disk, 1 spring, 3 screws.

Spare parts set

‘

Ü ü

Code

R g

59 25 10 10

735/10

R g

725QR/4

‘

28.80

for ratchets from 12/97 ‘

7350/20

for No

€

‘

19 01 10 20

for No

‘

Content: 1 pinion; 1 pawl; 1 lever with pin; 1 ball; 2 compression springs; 2 screws M 1.7 x 8; 1 cover plate

Code

Set of spare parts

€ 27.70

Set of spare parts

Content: 1 pinion, 1 pawl, 1 switching disk, 1 spring, 3 screws.

‘

4350QR

Spare parts set

Code

Ü ü

59 25 10 20

735/20

146

R g

725QR/5

‘

28.70

‘

7350/40

for No

€

for ratchets from 4/96

‘

19 02 00 20

R g

‘

Content: 1 pinion, 1 pawl, 1 lever with pin, 1 ball, 2 compression springs, 2 screws

Code

for No

‘

€ 27.70

Set of spare parts

Content: 1 pinion, 1 pawl, 1 switching disk, 1 spring, 3 screws.

‘

7250QR/10

Spare parts set

Code

Ü ü

59 25 10 40

735/40

219

€ 35.40

for ratchets from 5/97 ‘

70V

‘

for No

R g

725QR/10

‘

19 04 10 20

R g

‘

Content: 1 pinion, 1 pawl, 1 lever with pin, 1 ball, 2 compression springs, 2 screws

Code

for No

‘

€

Square drive units

for torque wrenches and insert tools.

27.10

‘

5120QR

Spare parts set

Ü ü

‘

Content: 1 pinion, 1 pawl, 1 lever with pin, 1 ball, 2 compression springs, 2 screws

Code

‘

Code

for No

R g

725QR/20

127

‘

19 04 00 20

€ 28.60

‘

7350/5

Set of spare parts

R g S

a ''

b ''

L mm

1/4 3/8 3/8 3/8

1/4 1/4 3/8 1/2

1/2 1/2 3/4 3/4

17.5 5 22 12 25.8 17 30 28 33.5 39 44.3 52 52.2 138 65 179

5 5 5 5 5 5 5 1

€ 11.30 12.40 9.65 11.70 7.25 9.15 17.80 18.70

‘

70VK

for No

R g

735/5

‘

Calibrating square drive units

Without a ball or pin. Optimum measuring results during calibration thanks to reduced lateral forces.

‘

59 25 10 05

for No

59 01 00 01 1 71...V/1 59 01 00 14 11 734/4 59 01 00 03 3 734/5 59 01 00 05 5 734/10 59 01 00 11 502 1/2 720/30; 734/20 59 01 00 07 7 721/30 59 01 00 08 8 734/40 59 01 00 15 12 720Nf/80; 721Nf/80+100

Content: 1 pinion, 1 pawl, 1 switching disk, 1 spring, 3 screws.

Code

size

‘

€ 26.20

‘

for ratchets from 12/97 ‘

‘

Code

size

for No

a ''

b ''

L mm

R g S

734/4 734/5 734/20 734/40

3/8 3/8 1/2 3/4

1/4 3/8 1/2 3/4

24.7 27.6 36.9 52.2

15 20 60 147

‘

59 01 10 14 11 59 01 10 03 3 59 01 10 11 502 1/2 59 01 10 08 8

5 5 5 5

€ 12.40 9.65 7.25 17.80

‘

183

Torque tools MULTIPOWER Makes child’s play of the largest torques. Multipower – or really “tough work”. STAHLWILLE Multipower torque multipliers with planetary gears take the fatigue out of tightening or loosening stiff or large bolt connections. A long lever is not necessary. STAHLWILLE Multipower multiplies human strength; steady torque transfer is easy on nuts and bolts. Even the largest torques are transferred with ease and precision over long periods. Accordingly, construction materials and workmanship are extremely robust. When combined with STAHLWILLE torque wrenches, Multipower really shows its strength. The Multipower range extends to 5000 N m/3687 ft.lb. Multipower tools are also available on request up to 12000 N m/8850 ft.lb. The Multipower from 2000 N m are fitted with an anti-backlash device. MULTIPOWER with overload protection and planetary gears, in carrying case, with spare hex. for overload device, deviation of indication ± 5%.

MP300-1350

MP300-800

MP300-5050 MP300-3000

MP300-2000

‘

Code

N m1)

ft.lb1)

N m2)

ft.lb2)

MP300-800 MP300-1350 MP300-2000*) MP300-3000*) MP300-5000*)

800 1350 2000 3000 5000

590 996 1475 2212 3687

229 375 160 240 294

169 277 118 177 217

Gear ratio

Torque ratio

a ''

D ''

b mm

h mm

L mm

R g

Rg with box

1 : 3.5 1 : 3.6 1 : 12.5 1 : 12.5 1 : 17.0

1/2 3/4 1/2 3/4

3/4 3/4

3/4

1 1/2

66 90 95 95 120

85 106 161 161 180

215 2000 5838 265 3400 7500 330 7000 11000 330 7000 10805 400 10400 14000

€

‘

53 03 08 00 53 03 13 50 53 03 20 00 53 03 30 00 53 03 50 00 1

4:1 4:1 16 : 1 16 : 1 20 : 1

1 1

641.00 936.00 2278.00 2700.00 3829.00

‘

Multipower tools are also available on request up to 12000 N m/8850 ft.lb. *) with anti-backlash device 1 ) max. output 2 ) max. input ‘

Spares for Multipower Sun wheel with overload cutout

Replacement square drives drilled, for STAHLWILLE Multipower STW 390–STW 393 (until 1996). ‘

Code

R g

‘

59 30 39 11 59 30 39 21 59 30 39 31

‘

Code

for No

R g

€

SR300-800 SR300-1350 SR300-2000 SR300-3000 SR300-5000 SR290N SR295N SR391N SR392N SR393N

MP300-800 MP300-1350 MP300-2000 MP300-3000 MP300-5000 STW 290N STW 295N STW 391N STW 392N STW 393N

45 106 120 130 127 41 95 95 105 105

116.00 116.00 116.00 116.00 116.00 116.00 116.00 116.00 116.00 116.00

‘

59 03 08 00 59 03 13 50 59 03 20 00 59 03 30 00 59 03 50 00 59 30 00 39 59 30 00 67 59 30 00 68 59 30 00 69 59 30 00 70 ‘

184

STW 391-700* STW 392-70 STW 393-70

‘

* also for STW 390 ‘

89 232 252

€ 199.00 168.00 164.00

With STAHLWILLE as your preferred partner you can ensure controlled tightening, record the results of tightening processes, monitor torque tools. STAHLWILLE's DAkkS calibration laboratory for torque is accredited by the German Accreditation Body in accordance with DIN EN ISO/IEC 17025: 2005. Which means the specific requirements listed in Technical Specification ISO/TS 16949 relating to testing laboratories are met. Absolutely essential: This is absolutely essential to all suppliers in the automotive sector!

Relationship between the national standard and the equipment

The transfer torque wrenches and torque transducers in use at STAHLWILLE's DAkkS calibration laboratory are subject to regular examination by the German Federal Physics Institute (PTB) in Braunschweig.

During the first stage, the end-user checks the accuracy of the torque tools in-house using suitable calibrated testing equipment. At the next stage, this test equipment is checked in STAHLWILLE's DAkkS calibrating laboratory.

The accuracy of the torque wrenches must be proved in a series of steps and these must be traceable. Only in this way can the reliability of the readings be guaranteed.

This accreditation by the German Accreditation Body (DAkkS) in accordance with DIN EN ISO/IEC 17025: 2005 guarantees the direct link between the measuring equipment and the national standard as laid down in DIN EN ISO 9001: 2008.

During the first stage, the enduser checks the accuracy of the torque tools in-house using suitable calibrated testing equipment.

185

Complete calibration systems with matched components Motorised calibrating tool No 7794-2

Transducer

USB adapter No 7757-1

PC – not included in the delivery

Manual calibrating unit No 7794-1

No 7721-1: 0.4 – 20 N m No 7722: 2 – 100 N m No 7723-2: 8 – 400 N m No 7723-3: 25 – 1100 N m

Printer – not included in the delivery

Complete calibration systems No:

7794-2/400

7794-2/1100

7794-1/400

7794-1/1100

Code Weight/kg Range/N m

96 52 10 78 61.9 0.4–400

96 52 10 79 69.6 0.4–1100

96 52 10 76 53 0.4–400

96 52 10 77 60.7 0.4–1100

Motorised calibrating tool

No 7794-2

–

Manual calibrating unit

–

No 7794-1

Extension unit

–

No 7791-1

–

No 7791-1

Transducer*

No 7721-1 (0.4–20 Nm) No 7723-2 (8–400 Nm)

No 7721-1 (0.4–20 Nm) No 7722 (2–100 Nm) No 7723-3 (25–1100 Nm)

No 7721-1 (0.4–20 Nm) No 7723-2 (8–400 Nm)

No 7721-1 (0.4–20 Nm) No 7722 (2–100 Nm) No 7723-3 (25–1100 Nm)

USB Adapter

No 7757-1

Jack cable

No 7751

Spiral cable

No 7752

Square drive adaptor

No 409M (1/4” a x 3/8” D) No 7787 (1/4” a x 3/4” D) No 7788 (3/8” a x 3/4” D) No 7789 (1/2” a x 3/4” D) No 7789-4 (1/4” a x 1/2” D) No 7789-5 (3/8” a x 1/2” D) No 734K/4 (1/4” D) No 734K/5 (3/8” D) No 734K/20 (1/2” D) No 734K/40 (3/4” D)

Calibration software

TORKMASTER

Works calibration Certificate

Calibrating square drive insert tools

Printer and PC are not included in the delivery. *Transducers can also be used in conjunction with workshop torque tester No 7707 W.

186

7794-2

Motorised calibrating and adjusting tool from 0.4 to 400 N m, registered design

The electronic perfectControl calibrating unit with its electric drive considerably reduces the amount of effort and time required for calibration and adjustment tasks on torque wrenches. • measurement possible without moving the point of application of force. • prevents faulty readings thanks to precision-mounted spindle and finely regulated motor. product design • extremely accurate calibration thanks to optimised bearings and square drives for the transducers. award • rapid, easy change of transducers thanks to quick-release latching system. • convenient pushbutton controls for clockwise and anticlockwise measurements with automatic speed compensation. 2011 • saves time because the bridge support is locked in place using a single-handed eccentric lever. • transmission of readings to a PC via USB interface for further processing, analysis and archiving. • calibration certificates can be printed or saved as a PDF file after calibration. • as found / as left calibrations can be documented. • during calibration, DIN EN ISO 6789:2003 in numerous languages is supported. Additional standards and works standards are available on request. • calibration up to 1100 N m is possible using the easily attached extension unit No 7791-1 (see p. 190) Both clicking and indicating torque wrenches can be calibrated. Calibration of transducers is possible using reference torque wrenches No 7770-100 and 7770-1000, available on request. 4 calibrating square drive insert tools No 734K (sizes 4, 5, 20, 40), 6 square drive adaptors (No 409M, No 7787, No 7788, No 7789, No 7789-4, No 7789-5), 1 USB adaptor No 7757-1, software Torkmaster, 1 jack cable No 7751, 1 spiral cable No 7752, 1 low-temperature cable connector, hexagon key wrench No 10760CV size 2 mm are included. The unit is supplied without the torque wrench, transducers or notebook.

7794-2

‘

Code

Capacity Nm

for transducer No

0.4–400

7721-1; 7722; 7723-1; 7723-2; 7723-3

‘

96 52 10 93

for torque wrenches with Profile width b mm mm functional length (LF) max. mm 815

180

640

h mm

L mm

R kg

328

1060

57 Price on request

€

‘

7794-1

Manual calibrating unit from 0.4 to 400 N m, registered design

As for perfectControl No 7794-2, but the drive is via an ergonomically designed handwheel. Can be upgraded to perfectControl calibrating unit No 7794-2 with an electric drive. Calibration up to 1100 N m is possible using the easily attached extension unit No 7791-1 (see p. 190). 4 calibrating square drive insert tools No 734K (sizes 4, 5, 20, 40), 6 square drive adaptors (No 409M, No 7787, No 7788, No 7789, No 7789-4, No 7789-5), 1 USB adaptor No 7757-1, software Torkmaster, 1 jack cable No 7751, 1 spiral cable No 7752, 1 low-temperature cable connector, hexagon key wrench No 10760CV size 2 mm are included. Supplied without torque wrench, transducer or notebook.

7794-1

‘

Code ‘

96 52 10 92

Capacity Nm

for transducer No

for torque wrenches with Profile width b h mm mm mm functional length (LF) max. mm

0.4–400 7721-1; 7722; 7723-1; 7723-2; 7723-3

815

180

L mm

705 355 1060

R kg

€

47 Price on request

‘

187

STAHLWILLE as your partner

Calibration Calibration is the regular examination of the accuracy and reliability of torque tools.

This is done using special-purpose calibrating equipment which is subject to stringent monitoring. This is essential because torque tools are precision instruments which are very often in use in safety-relevant environments. They are expected to provide the same level of accuracy in their readings reliably over long periods of time. In order to ensure these standards are guaranteed, it is essential that examination by means of calibration takes place at regular intervals and is documented.

At the very least, a calibration system must include the following components.

3. USB hub and USB cable Up to 5 transducers can be connected to the USB hub. From here, the data are transferred to the PC.

4. Cable You will require 1 cable fitted with jack plugs for each transducer which is permanently connected up.

5. Square drive adapter The set includes the square drive adapters necessary to make full use of the measuring range of the transducers; e.g. for transducer No 7723-3 (internal square drive 3/4”), square drive adapter No 7787 (1/4” female to 3/4” male), No 7788 (3/8” female to 3/4” male) and No 7789 (1/2” female to 3/4” male).

1. 1. Mechanical loader The mechanical loader is required for rapid, accurate fixing and operation of the torque wrench. The mechanical loader also ensures that the DIN EN ISO 6789 requirement for clicking torque wrenches is fulfilled, i.e. that, above 80 % of the final torque value, the force is applied slowly and steadily within a period of 0.5 to 4 seconds.

2. Transducer The torque applied using the torque wrench is digitalised within the transducer and transmitted via USB cable to the PC, which ensures errorfree transmission.

6. Software The data received in this way can then be used to issue a calibration certificate in accordance with DIN/ISO 6789.

Complete calibration systems with matched components Test attachment for torque screwdriver

Transducer

Mechanical base unit

USB hub No 7753

Cable No 7751

USB cable

No 7721: 0.2 – 10 N m No 7722: 2 – 100 N m No 7723-3: 25 – 1100 N m No 7724-1: 150 – 3000 N m

Extension unit

PC – not included in the delivery

Printer – not included in the delivery

Complete calibration systems No:

7706-8 PC

7706-9 PC

7706-10 PC

7706-11 PC

Code Weight/kg Range/N m

96 52 10 68 14.2 0.2–10

96 52 10 69 67.6 0.2–100

96 52 10 70 70.6 2–1100

96 52 10 74 108.4 25–3000

Mechanical loader

–

No 7791

No 7792

Stand alone test attachment for torque screwdrivers

No 7790

–

Test attachment for torque screwdrivers

–

No 7791-2

–

Extension unit

–

No 7791-1

No 7792-1

Transducer*

No 7721 (0.2–10 Nm)

No 7721 (0.2–10 Nm) No 7722 (2–100 Nm)

No 7722 (2–100 Nm) No 7723-3 (25–1100 Nm)

No 7723-3 (25–1100 Nm) No 7724-1 (150–3000 Nm)

USB hub (incl. cable for connection to PC)

–

No 7753

USB adapter

No 7757-1

–

2 x No 7751

No 431 (3/8” a x 1/4” D) No 409M (1/4” a x 3/8” D)

No 7787 No 7788 No 7789 No 409M

No 734K/4 (1/4” D) No 734K/5 (3/8” D) No 734K/20 (1/2” D) No 734K/40 (3/4” D)

Jack cable No 7751 (connection between transducer and USB hub) Square drive adaptor No 431 (3/8” a x 1/4” D)

(1/4” a x 3/4” D) (3/8” a x 3/4” D) (1/2” a x 3/4” D) (1/4” a x 3/8” D)

No 7787 (1/4” a x 3/4” D) No 7788 (3/8” a x 3/4” D) No 7789 (1/2” a x 3/4” D) No 7789-2 (3/4” a x 1|” D) No 7789-3 (1” a x 1|” D) No 734K/4 (1/4” D) No 734K/5 (3/8” D) No 734K/20 (1/2” D) No 734K/40 (3/4” D)

Calibrating square drive insert tools

–

No 734K/4 (1/4” D) No 734K/5 (3/8” D)

Adaptors

No 3115 (1/4” D x 1/4” E E 6.3) No 3115/1 (1/4” D x 1/4” E C 6.3)

No 3115 (1/4” D x 1/4” E E 6.3) – No 3115/1 (1/4” D x 1/4” E C 6.3)

Calibration software

TORKMASTER

Works calibration certificate

–

Printer and PC are not included in the delivery. *Transducers No 7721–7723 can also be used in conjunction with workshop torque tester No 7707 W.

189

Torque testers

Mechanical loaders for torque wrenches and torque screwdrivers Thanks to the modular design, end users can put together their own mechanical loader according to their specific requirements. Extensions with additional components are possible any time. All the components are carefully matched to ensure compatibility and can be easily fitted. This slot-in system is easy to use and has a very accurate fit. The components can be quickly and easily locked together using the integrated screw joints. The display unit can be attached at various points of the system via a holder. In this way, every user can organise his or her work to suit themselves. 7791

Mechanical base unit from 0.4 to 400 N m, registered design

Measurement possible without moving the point of application of force. Thanks to a specially designed force transmission system, mechanical loader No 7791 avoids the risk of the point of force application shifting during the calibration process. The lever below the test rail is actuated in a linear direction by the handwheel acting on a spindle. The linear motion is translated into a rotary movement which acts on the transducer. The torque wrench to be calibrated remains in the same position throughout the calibration process. This prevents measuring errors caused by the point of force application being moved. Thanks to a low-friction linear ball bearing, the torque wrench is automatically levelled as it is placed in the unit. A further linear ball bearing ensures the contact with the torque wrench is friction-free. The reduction in lateral forces acting on the transducer and in the friction on the point of contact with the torque wrench results in a corresponding reduction in mismeasurement. Supplied without torque wrench, transducer, display unit and holder.

7791 7791-2 7791

5 ‘

Code

Capacity Nm

for transducer No

0.4–400

7721-1; 7722; 7723-1; 7723-2; 7723-3

‘

52 11 00 91

for torque wrenches with Profile width b mm mm functional length (LF) max. mm 815

180

704

h mm

L mm

323 1069

R kg

€

26.5 2533.00

‘

7791-1

Extension unit for No 7791, 7794-1 and 7794-2 up to 1100 N m

with one pair of adapter plates No 7770-3 for height compensation between extension unit No 7791-1 and perfectControl calibrating units No 7794-1 and No 7794-2.

7791-2 7791 7791-1

7791-1

‘

Code

Capacity Nm

‘

52 11 01 91 ‘

190

–1100

for torque wrenches with Profile width b mm mm functional length (LF) max. mm 1390 (7791 + 7791-1)

180

308

h mm

L mm

R kg

€

135

673

5.4

412.00

7792

Mechanical base unit from 25 to 1100 N m, registered design 7790

7792 7792 ‘

Code

Capacity Nm

for transducer No

for torque wrenches with functional length (LF) max. mm

Profile width mm

b mm

h mm

L mm

R kg

€

25–1100

7723-3; 7724-1

1390

270

722

323

1668.5

4231.00

‘

52 11 00 92 ‘

7792-1

Extension unit for No 7792 up to 3000 N m 7790

7792-1

7792 7792-1

‘

Code

Capacity Nm

for torque wrenches with functional length (LF) max. mm

Profile width mm

b mm

h mm

L mm

R kg

€

–3000

2390 (7792 + 7792-1)

270

558

135

1073

23.9

831.00

‘

52 11 01 92 ‘

7790

Test attachments for torque screwdrivers 7791-2

Stand alone test attachment for torque screwdrivers

Can be bolted to mechanical loader No 7792. The torque screwdriver to be calibrated is inserted in the square mount of the transducer and fixed using the universal central clamp. The handwheel ensures that the required force is applied in a controlled manner to the torque screwdriver. Supplied without transducer or torque screwdriver.

Test attachment for torque screwdrivers

Can be bolted onto mechanical loader No 7791. The torque screwdriver to be calibrated is inserted in the square mount of the transducer and fixed using the universal central clamp. The handwheel ensures that the required force is applied in a controlled manner to the torque screwdriver.

‘

Code

Capacity for transducer b Nm No mm

h mm

t R mm kg

‘

58 52 10 90

–10

7721

€

250 442–593 351 7.9 1188.00

‘

Code

Capacity Nm

b mm

h mm

t mm

R kg

€

–10

250

442–593

351

3.9

1110.00

‘

52 11 02 91

Accessory 7750-1

‘

Holder

for display unit No 7750. Can be bolted to mechanical loaders and test attachments.

‘

Code

R g

€

165

43.20

‘

52 10 10 50 ‘

191

Torque testers Electronic torque tester for torque wrenches Sensotork® 7707 W (For complete calibration systems, see p. 186, 189) Compact workshop-based torque tester for easy adaptation by replacement of the transducers. High degree of accuracy thanks to flat transducer and conversion and digitalisation of readings within the transducer (see p. 193). High degree of safety through display showing actual torque read-off where clicking torque wrenches are used. Workshop torque tester Sensotork®

7707 W

Electronic workshop torque tester for torque wrenches, consisting of: • transducer (registered design) • holder • display unit (registered design) • tripod for display unit (with 1.5 m cable) • spiral cable • mains adaptor (110 V–230 V with interchangeable socket adaptors) or direct connection to 12 V in-car supply is possible • square drive adaptor (No 7707-2W, No 7707-2-1W, No 7707-2-2W, No 7707-3W) • kit for attaching the unit to a workbench or wall in a horizontal or vertical testing position for clockwise and anticlockwise use. Units of measurement: N m, ft.lb, in.lb. The easily interchangeable transducers are attached to the holder by means of a QuickRelease safety lock. Low lateral forces thanks to low-profile transducers, automatic detection of the transducer, flexible and user friendly because the unit can be used horizontally or vertically and the display unit can be placed in many positions, additional tripod with 1.5 m cable for mounting the display unit to facilitate visual monitoring when using longer torque wrenches, especially broad measuring range from approx. 2% to 100% of rated value. The software No 7759-4, including USB hub and jack cable (see p. 194), enables readings to be transferred to the PC for documenting and for generating calibration certificates in accordance with DIN EN 6789:2003 (no separate power supply needed, power comes from PC). While individual transducers are being recalibrated, the torque tester itself remains on-site for further use. Wide range of application (-20°C to +60°C). Complies with DIN 51309: 2005, Class 2 and DKD-R 3-8: 2003. With certificate. Supplied in sturdy plastic case.

Ü ü QuickRelease

Rapid change and firm locking of the transducers thanks to the QuickRelease safety lock.

Interchangeable square drive adapters: A set of interchangeable square drive adapters are conveniently stored in the mounting block for a range of different drive sizes.

‘

Code

Capacity Nm

Capacity ft.lb

Capacity in.lb

a ''

b mm

h1 mm

h2 mm

t mm

R g

7707-1W 0.4–20 2–100 7707-2W 1) 4–200 7707-2-1W 2) 8–400 7707-2-2W 3) 7707-3W 3) 25–1100

0.3–15 1.5–74 3–148 6–295 18–812

3.5–177 18–885 35–1770 71–3540 221–9736

1/4 3/8 1/2 3/4

180 180 180 180 180

79 79 79 79 79

215 215 215 215 215

180 180 180 180 180

6255 7025 7511 7654 7495

Rg with box

‘

96 52 10 80 96 52 10 72 96 52 10 83 96 52 10 84 96 52 10 82 1

3/4

‘

) with square drive adaptor No 409M (1/4'' a x 3/8'' D) ) with square drive adaptors No 7789-4 (1/4'' a x 1/2'' D), No 7789-5 (3/8'' a x 1/2'' D) 3 ) with square drive adaptors No 7787 (1/4'' a x 3/4'' D), No 7788 (3/8'' a x 3/4'' D), No 7789 (1/2'' a x 3/4'' D) 1 2

‘

192

9500 10300 10975 11100 11000

€ 3154.00 3168.00 3223.00 3223.00 3223.00

Which transducer is for which torque wrench? (Calibration in accordance with DIN EN ISO 6789: 2003) STAHLWILLE’s recommendation: +++ very well suited No

++ well suited

7721-1

730D/10 730D/20 730D/40 730D/65 730N/2 730N/5 730N/10 730N/12 730N/20 730N/40 730N/65 730Na/2 730Na/5 730Na/10 730Na/20 730Na/40 730/2 730/4 730a/2 730a/4 730/5 730/10 730/12 730/20 730/40 730/65

7722

+ suitable

7723-1 7723-2 7723-3

+++

730a/5 730a/10 730a/12 730a/20 730/80 720Nf/80 721/5 721/15 721/30 721Nf/80 721Nf/100 755R/1 755/4 755/10 755/20 755/30 71/40 71/80 71aR/80 73Nm/15 712R/6 712R/20 712R/40 713R/6 713R/20 713R/40

+++ +++ +++ +++ +++ +++

++ +++ +++

+++ +++ +++

+++ +++

7721–7724

++ +++ ++ +++ +++ +++

++ +++ + ++ + ++ ++ ++ +++ +++

++ +++ + + + ++ ++ +++

+ + ++ +++

7721-1

7722 +++ +++

+++

7723-1 7723-2 7723-3 7724-1 ++ ++ +++ +++

++ +++

+ ++ ++

++ +++

+ + +++ +++

+ +

+ ++ +++ +++

+ +

+ ++ ++ +++ +++

+ +

+++ +++ +++

+++

++ ++ +++

+ ++ +++ +++

++ +++ +++ +++ +++

+++ +++

Transducers

Ü ü

registered design, high degree of accuracy thanks to conversion and digitization of readings within the transducer itself. Not susceptible to lateral forces due to low-profile construction. Can also be used as part of a calibration system (see p. 186, 189). With certificate. Supplied in sturdy plastic case.

‘

Code

Display deviation value ± 1% of the reading Nm ft.lb in.lb

Measuring ranges by deviation of indication Display deviation value ± 0.5% of the reading Nm ft.lb in.lb

Display deviation value ± 0.25% of the reading Nm ft.lb in.lb

a ''

R g

€

1/4 1/4 1/4 3/8

1735 1735 1735 2486 2983 3134 2998 10500

1449.00 1449.00 1449.00 1599.00 1599.00 1599.00 1599.00 2899.00

‘

52 10 00 20 52 10 00 21 52 10 00 26 52 10 00 22 52 10 10 23 52 10 20 23 52 10 00 28 52 10 00 29 1

7721-0 )U 0.2–10 0.2–10 7721 2) 7721-1 0.4–20 7722 2–100 7723-1 4–200 7723-2 8–400 7723-3 25–1100 3 150–3000 7724-1 )

0.15–7.4 0.15–7.4 0.3–15 1.5–74 3–148 6–295 18–812 111–2214

1.8–88.5 1.8–88.5 3.5–177 18–885 35–1770 71–3540 221–9736 1328–26553

1–10 1–10 2–20 10–100 20–200 40–400 110–1100 300–3000

0.74–7.4 0.74–7.4 1.5–15 7–74 15–148 30–295 81–812 221–2214

8.9–88.5 8.9–88.5 18–177 89–885 177–1770 354–3540 974–9736 2655–26553

2–10 1.5–7.4 17.7–88.5 2–10 1.5–7.4 17.7–88.5 4–20 3–15 35–177 12–100 9–74 106–885 40–200 30–148 354–1770 80–400 59–295 708–3540 220–1100 162–812 1947–9736 600–3000 443–2214 5311–26553

1/2 3/4 3/4 1 1/2

‘

) for calibrating torque wrenches ) for calibrating torque screwdrivers ) for use with mechanical loader No 7792 and 7792-1 (see p. 191)

2 3 ‘

Note! Torque testers are measuring instruments! They have to be regularly calibrated and, where necessary, adjusted, using suitable calibration equipment. We recommend recalibrating every 12 months. ‘

193

Torque testers 7751

Accessories for workshop torque tester and calibration systems 7750

Jack cable

Connection between transducer and USB adaptor or display unit, with jacks at both ends, 90° angled.

Display unit

registered design, for displaying the actual torque as measured. Units of measurement: N m, ft.lb, in.lb. Modes of operation: track, peak hold, first peak (only with manual operation), additional display of actual torque applied with clicking torque wrenches. Swivels to any desired position thanks to universal ball-joint.

‘

Code

L m

R g

€

1.5

8.20

‘

52 11 00 51 ‘

7753

USB adaptor with USB cable

for connecting up to 5 transducers to the PC for evaluating your data.

‘

Code

R g

€

182

709.00

‘

52 10 00 50 ‘

‘

Code

L mm

b mm

h mm

R g

€

125

230

445.00

‘

52 11 00 53 ‘

7759-4

USB adaptor, jack cable and software Torkmaster

7752

Link between perfectControl or transducer and PC. For adjusting and calibrating torque wrenches and torque screwdrivers. Produces calibration certificates in accordance with DIN EN ISO 6789: 2003, which can be printed out or saved as PDF files. • as found / as left calibrations can be documented. • graphical representation of the torque progression • user management • 17 languages • equipment testing system

Spiral cable

Connection between transducer and display unit or USB adaptor, with jacks at both ends, 90° angled.

‘

Code

L max. mm

R g

€

500

10.30

‘

52 11 00 52 ‘

7760

Mains adaptor

Input: 110 V–230 V AC , Output: 12 V DC, with interchangeable socket adaptors.

System requirements: • PC • Microsoft Windows XP SP3 or later operating system • USB connection

‘

Code

Volt

R g

€

110–230

385

38.70

‘

52 11 00 56 ‘

409M 1/4''

Square drive adaptor

socket x 3/8'' plug (6.3 x 10 mm).

‘

Code

L mm

O mm

R g

€

14.40

‘ ‘

Code

L m

R g

€

1.5

137

120.40

‘

96 58 36 29 ‘

194

11 03 00 10 ‘

7787 1/4''

socket x

Square drive adaptor 3/4''

7789-3

plug (6.3 x 20 mm).

Square drive adaptor

1'' socket x 1

1/2''

plug (25 x 40 mm).

‘

Code

L mm

O mm

R g

€

15.5

23.00

‘

58 52 10 87

‘

Code 58 52 40 89

7788 3/8''

L mm

O mm

R g

€

291

89.50

‘

Square drive adaptor

7789-4

socket x 3/4'' plug (10 x 20 mm).

1/4''

Square drive adaptor

socket x 1/2'' plug (6.3 x 12.5 mm).

‘

L mm

Code

O mm

R g

‘

58 52 10 88

23.5

‘

€ 23.00

‘

Code

L mm

O mm

R g

€

15.5

23.00

‘

58 52 40 90 ‘

7789 1/2''

socket x

Square drive adaptor 3/4''

7789-5

plug (12.5 x 20 mm).

3/8''

socket x

Square drive adaptor 1/2''

plug (10 x 12.5 mm).

‘ ‘

Code

L mm

O mm

R g

‘

58 52 10 89

23.5

€ 23.00

Code

L mm

O mm

R g

€

15.5

23.00

‘

58 52 40 91 ‘

‘

7789-2 3/4''

734K

Square drive adaptor

Calibrating square drive insert tools

Without a ball or pin. Optimum measuring results during calibration thanks to reduced lateral forces.

socket x 1 1/2'' plug (20 x 40 mm).

‘ ‘

Code

L mm

O mm

R g

‘

58 52 30 89 ‘

383

€ 89.50

Code

size

D ''

4 5 20 40

1/4 3/8 1/2 3/4

J mm

b mm

h mm

S mm

R g

€

9 x 12 9 x 12 14 x 18 14 x 18

20 20 27 40

14 14 18 25

17.5 76 17.5 80 25 218 25 410

24.80 24.80 27.60 45.60

‘

58 24 30 04 58 24 30 05 58 24 30 20 58 24 30 40 ‘

STAHLWILLE is an accredited calibrating laboratory. Controlled tightening is a must in terms of safety and the lifetimes of the screws and bolts. STAHLWILLE has been awarded accreditation as a calibrating laboratory for torque by the German Accreditation Body (DAkkS) because of the Company’s skills in the field of torque controlled tightening. STAHLWILLE’s calibration service The STAHLWILLE calibration service is in a position to offer both the usual works calibration certificate and the DAkkS certificate. Included in the price of calibration of STAHLWILLE products are the costs of any adjustment required and a second calibration operation. In addition, the STAHLWILLE calibration service provides complete monitoring, documentation archiving and follow-up timing for torque wrenches and testers. Additional information on these services is available on request.

195

Torque tools Note! This is how to achieve the correct tightening torque – even if you are using inserts with an extension When you tighten fasteners using inserts whose extension length S deviates from the standard length SF , it is necessary to recalculate the setting/display value for the torque wrench in use. Caution! If adapters are combined with inserts or special tools, use the sum of the extensions = Σ S. Where the special tool is angled to the side, WK will have to be determined empirically.

WK = WK =

[

MA • LF Lk

N m • mm mm

Normal situation

]

Torque wrench No 730N/10 combined with square drive insert tool No 734/5 and socket size 13 mm. Required tightening torque for the screw MA = 40 N m

MA • LF LF – SF + S (or Σ S)

Dimension table for torque wrenches: LF = 336 mm, SF = 17.5 mm Dimension table for square drive insert tools: S = 17.5 mm → S = SF → W = MA

MA = desired tightening torque S W

= reading/setting W = MA

WK = adjusted reading or setting value WK = MA LF = functional length (see dimension table for torque wrenches) LK = adjusted functional length LK = LF – SF + S (bzw. Σ S)

= extension of STAHLWILLE inserts or special tools (see dimension table for inserts) SF = standard extension (see dimension table for torque wrenches) Σ S = total of all extensions of the attached inserts Sadapter + Sinsert + …

No adjustment to setting value required on torque wrench.

Example 2: adjusted reading (insert tool and adapter) Torque wrench No 71/2 combined with square drive insert tool No 734/5 and adapter No 447 size 10 mm Required tightening torque for the screw MA = 25 N m

Example 1: adjusted setting value (1 insert tool)

Dimension table for torque wrenches: LF = 250 mm, SF = 17.5 mm Dimension table for square drive insert tools: S = 17.5 mm Dimension table for adapters: S = 50.8 mm

Torque wrench No 730N/20 combined with ring insert tool No 732/40 size 36 mm Required tightening torque for the screw MA = 190 N m

→ Σ S = SF → W = MA

Dimension table for torque wrenches: LF = 424,5 mm, SF = 25 mm Dimension table for ring insert tools: S = 28 mm

→ S = SF → W = MA

WK =

MA • L F

190 N m • 424.5 mm

LF – SF + S

190 N m • 424.5 mm

424.5 mm – 25 mm + 28 mm

Adjusted setting value WK = 188.7 N m

WK =

427.5 mm

value to set 189 N m

MA • L F LF – SF + Σ S

25 N m • 250 mm

250mm –17.5mm+17.5mm+ 50.8mm

300.8 mm

Adjusted reading WK = 20.8 N m

… and this is what it looks like in the catalogue. 730N

Basic wrenches with tool carrier for insert tools

732/40

Ring insert tools

P 730N/10

Ü ü ‘

Code ‘

size

50181002 2 2–20 N m 50181005 5 10–50 N m 50181010 10 20–100 N m 50181012 12 25–130 N m 50181020 20 40–200 N m 50181040 40 80–400 N m 50181065 65 130–650 N m 50581002 a/2 20–180 in.lb 50581005 a/5 90–450 in.lb 50581010 a/10 180–900 in.lb 50581020 a/20 350–1800 in.lb 50581040 a/40 60–300 ft.lb 1

W 20–180 in.lb 7–37 ft.lb 15–75 ft.lb 20–95 ft.lb 30–150 ft.lb 60–300 ft.lb 100–480 ft.lb 1.5–15 ft.lb 7–37 ft.lb 15–75 ft.lb 30–150 ft.lb 800–3600 in.lb

1Nm 5Nm 10 N m 10 N m 10 N m 20 N m 50 N m 10 in.lb 50 in.lb 100 in.lb 100 in.lb 20 ft.lb

10 in.lb 1 ft.lb 2.5 ft.lb 2.5 ft.lb 5 ft.lb 10 ft.lb 20 ft.lb 0.5 ft.lb 1 ft.lb 2.5 ft.lb 5 ft.lb 100 in.lb

Fine scale X

J mm

0.2 N m 0.25 N m 0.5 N m 0.5 N m 1Nm 2Nm 2.5 N m 2 in.lb 2.5 in.lb 5 in.lb 10 in.lb 2 ft.lb

; ; ; , , , , ; ; ; , ,

‘

b mm 28 28 28 28 28 28 30.6 28 28 28 28 28

h mm 23 23 23 23 23 23 25.6 23 23 23 23 23

L mm

LF mm

SF mm

R g

€

275 330 386 421 467 607 890 275 330 386 467 607

226 280.5 336 379 424.5 564.5 848 226 280.5 336 424.5 564.5

17.5 17.5 17.5 25 25 25 25 17.5 17.5 17.5 25 25

737 831 988 1128 1264 1655 3231 737 831 988 1264 1655

222.00 242.00 255.00 268.00 291.00 423.00 633.00 243.00 241.00 261.00 291.00 423.00

‘

Code 58224013 58224014 58224015 58224016 58224017 58224018 58224019 58224021 58224022 58224024 58224027 58224028 58224030 58224032 58224034 58224036 58224041 1

Required tightening torque for the screw MA = 190 N m Required setting value WK

WK =

MA • LF LF – SF + S

(

N m • mm mm

)

190 N m • 424.5 mm 424.5 mm – 25 mm + 28 mm

WK = 188.7 N m Adjusted setting value on torque wrench No 730N/20: 189 N m

196

A mm

J mm

b mm

h mm

S mm

R g

€

13 14 15 16 17 18 19 21 22 24 27 28 30 32 34 36 41

, , , , , , , , , , , , , , , , ,

22.5 23 24 25.5 27 29 30.5 33 34.5 37.5 42.5 45.5 46 47.5 52 54 60

11 11 11 12 12 13 13 15 15 15 17 19 19 19 19 19 20

25 25 25 25 25 25 25 25 25 25 25 25 25 25 28* 28* 30*

130 123 128 133 135 134 138 144 145 153 162 175 182 181 210 203 240

31.10 31.10 31.70 31.10 31.10 31.10 31.10 37.00 37.00 37.00 37.00 44.00 41.80 41.80 44.00 41.80 41.80

‘

* Caution! Modified settings on torque wrench. ‘

Example 1 (see above): Torque wrench 730N/20, combined with insert tool 732/40, size 36 mm. Required tightening torque for the screw MA = 190 N m Dimension table for torque wrenches: LF = 424.5 mm; SF = 25 mm Dimension table for insert tools: S = 28 mm

Screwdrivers

The power is where you put it with the screwdriver series The efficiency with which you use a screwdriver in your daily work, and the safety with which you work, depend to a large extent on the quality of the tool. It is not just the use of high-grade materials but also the shape that matters – in particular the shape of the handles – if you want to stay in control. STAHLWILLE’s screwdrivers unite these positive qualities in a manner which is close to perfect. The result is a longlife, ergonomically designed tool providing easy working combined with maximum force transmission – even with greasy hands. screwdrivers are available in sets conveniently positioned in plastic inlays or TCS safety inlays, designed for use with STAHLWILLE Tool Trolleys and Tool Boxes.

handles are made up of 3 components: 1st component Extremely resistant, impact-safe core made of black polypropylene (PP).

2nd component Soft, heat-bonded inlay made of easy-to-grip thermoplastic elastomer (TPE).

The ergonomically designed, almost square handle shape gives maximum contact with the handle, maximum leverage and, as a result, maximum non-slip force transmission, even with oily hands.

3rd component Two large surfaces coated with special fibres, resistant long-term to solvents to improve force transmission and work safety.

198

Together, these features make the tools very pleasant to handle and prevent your hands from slipping off the handles or twisting, even if your hands are damp or oily.

Additional Tommy-bar hole

Blades

When things get really tough, the additional Tommy-bar hole will cope with a fair amount of torque.

Made of high-grade Chrome Alloy Steel. Throughhardened. Anchored firmly in the haft due to the extra-wide, forged tang. High resistance to bending.

Great freedom of choice –

screwdrivers

4 handle sizes The handle sizes for the screwdrivers are designed specifically to match the drive profiles.

The profiles is available for the following screwhead profiles: r Slotted k PH cross-head l PZ cross-head n TORX® o TORX® Tamper Resistant with a central bore i Hex with a ball-end t TORQ-SET®

Impact-resistant cap For use under extreme conditions, the is also available with a one-piece shaft, an impact head and a metal impact cap.

A new challenge every day, a new tool every day to meet that challenge. The series was developed for professionals faced with new challenges on a daily basis. Development focussed on three crucial user requirements: durability and reliability, safety in use, pleasant to handle. These requirements are met in full by screwdrivers – in fact, they feel so natural, you will hardly notice them.

The elastic handle components The soft rubber textured thermoplastic elastomer (TPE) fits snugly in the hand. These sections are injection moulded around the hard core and bonded to it inseparably.

The firm handle components The green zones are made of high-grade,impact-safe polypropylene (PP). The tang is anchored in the core to allow force to be transferred through it..

The hand-stop helps stop injuries Flange-like design. Supports your hand in the direction of the blade to prevent it slipping off the handle. Features integrated anti-roll shape.

The multifunctional section

The transmission zone

The lower end of the handle is deliberately made extra-long. This enables the thumb and index finger to wrap around more easily and spin the screwdriver.

The rounded cross-section in the central area combines maximum grip and easy turning.

Tips Black, extremely tough, retain their shape. Whether you use the straight-bladed or Phillips type – the crosshatched blade tips will accurately transmit maximum force to the screw head.

T VDE insulated screwdrivers High-grade materials and durability testing guarantee absolute safety when working on AC systems up to 1000 V (effective voltage) or 1500 V DC.

199

Screwdrivers +

4691

DRALL set of screwdrivers

4697

DRALL set of screwdrivers +

Set of 7 DRALL screwdrivers. Content: r 4620: size 1 (0.6 x 3.5 x 75 mm) size 2 (0.8 x 4.0 x 100 mm) size 3 (1.0 x 5.5 x 125 mm) size 4 (1.2 x 6.5 x 150 mm) r 4628: size 1 (0.4 x 2.5 x 60 mm) k 4630: size 1; size 2

Set of 8 DRALL screwdrivers. Content: r 4620: size 1 (0.6 x 3.5 x 75 mm) size 2 (0.8 x 4.0 x 100 mm) r 4622: size 1 (1.0 x 5.5 x 100 mm) size 2 (1.2 x 6.5 x 125 mm) size 3 (1.2 x 8.0 x 150 mm) k 4730: size 1 k 4732: size 2; size 3

‘

Code

R g

620

‘

96 46 91 10

‘

€ 40.50

Code

R g

930

‘

€

‘

96 46 97 10

69.45

‘

4692

DRALL set of screwdrivers

+ n DRALL set of TORX®

4694

Set of 8 DRALL screwdrivers. Content: r 4620: size 1 (0.6 x 3.5 x 75 mm) size 2 (0.8 x 4.0 x 100 mm) size 3 (1.0 x 5.5 x 125 mm) size 4 (1.2 x 6.5 x 150 mm) size 5 (1.6 x 8.0 x 175 mm) k 4630: size 1; size 2; size 3

screwdrivers

Set of 9 DRALL screwdrivers for TORX® screws. Content: n 4650: T8, T9, T10, T15, T20, T25, T27, T30, T40 ‘

‘

Code

R g

870

‘

96 46 92 10

Code

€

‘

58.55

‘

96 46 94 10

R g

730

€ 71.75

‘

DRALL set of screwdrivers

screwdrivers

+ o DRALL set of TORX®

4699

4693

Set of 9 DRALL screwdrivers. Content: r 4622: size 1 (1.0 x 5.5 x 100 mm) size 2 (1.2 x 6.5 x 125 mm) size 3 (1.2 x 8.0 x 150 mm) size 4 (1.6 x 10.0 x 175 mm) r 4628: size 1 (0.4 x 2.5 x 60 mm) k 4632: size 1; size 2 r 4724: size 2 (1.0 x 5.5 x 25 mm) k 4734: size 2

Set of 9 DRALL screwdrivers for TORX® screws (TORX® TAMPER RESISTANT). Content: o 4656: T8, T9, T10, T15, T20, T25, T27, T30, T40 (with hollow point)

‘

Code

R g

740

‘

Code

R g

950

‘

96 46 93 10

96 46 99 10 €

‘

76.05

TCS 4620/4630

‘

ö x

4696

DRALL set of screwdrivers +

Set of 6 DRALL screwdrivers with an impact cap. Content: r 4622SK: size 1 (0.8 x 4.0 x 90 mm) size 2 (1.0 x 5.5 x 100 mm) size 3 (1.2 x 6.5 x 125 mm) size 4 (1.2 x 8.0 x 150 mm) k 4632SK: size 1; size 2

175 x 350 x 35 mm, 7 pieces ‘

Code 96 83 82 78 R g

870

65.65

No 4620

size 1 (0.6 x 3.5 x 75 mm); size 2 (0.8 x 4.0 x 100 mm); size 3 (1.0 x 5.5 x 125 mm); size 4 (1.2 x 6.5 x 150 mm)

No 4630

sizes 1; 2; 3

€ 69.65

‘

‘ ‘

200

€

490

‘

96 46 96 10

R g

‘

Code

€ 85.45

TCS 4620/4660VDE+10767

TCS 4621/4734/16

ö x

ö x U

530 x 350 x 30 mm, 16 pieces

530 x 350 x 35 mm, 27 pieces ‘

‘

R g

Code ‘

96 83 11 68

2080

€ 206.35

‘

R g

Code

€

‘

96 83 20 98

1490

218.45

‘

No 4620

size 1 (0.6 x 3.5 x 75 mm); size 2 (0.8 x 4.0 x 100 mm); size 4 (1.2 x 6.5 x 150 mm); size 5 (1.6 x 8.0 x 175 mm); size 6 (1.6 x 10.0 x 200 mm); size 7 (2.0 x 12.0 x 200 mm)

No 4621

size 0 (0.4 x 2.5 x 80 mm); size 1 (0.5 x 3.5 x 90 mm); size 2 (0.6 x 4.0 x 100 mm); size 4 (1.0 x 6.5 x 140 mm); size 5 (1.2 x 8.0 x 160 mm)

No 4631

size 1; 2

No 4632

size 1; 2; 3

No 4724

size 2 (1.0 x 5.5 x 25 mm)

No 4734

size 2

No 10506

0.8 x 4.0 x 300 mm

No 10518

1.0 x 5.5 x 410 mm

No 12600

500 g

No 12922E

O 6 mm

‘

‘ ‘

No 4628

size 1 (0.4 x 2.5 x 60 mm)

No 4630

sizes 1; 2; 3

No 4632

size 4

No 4640

sizes 0; 1; 2

No 4660 VDE

size 1 (0.4 x 2.5 x 75 mm)

No 4724

size 2 (1.0 x 5.5 x 25 mm)

No 4734 No 4744

size 2 size 1

No 10767/9

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

‘ ‘

‘

TCS 4622/4650+10760+10766

‘

ö x

TCS 4620/4660VDE

ö x

530 x 350 x 40 mm, 36 pieces ‘

R g

Code

530 x 350 x 40 mm, 18 pieces

96 83 11 96

‘

R g

Code ‘

96 83 11 79

1689

1895

size 1 (0.6 x 3.5 x 75 mm); size 2 (0.8 x 4.0 x 100 mm); size 4 (1.2 x 6.5 x 150 mm); size 5 (1.6 x 8.0 x 175 mm); size 6 (1.6 x 10.0 x 200 mm); size 7 (2.0 x 12.0 x 200 mm)

‘

238.00

‘

€

No 4622

size 1 (1.0 x 5.5 x 100 mm); size 2 (1.2 x 6.5 x 125 mm); size 4 (1.6 x 10.0 x 175 mm); size 5 (2.0 x 12.0 x 200 mm)

No 4630

size 1

No 4632

size 3

No 4650

sizes T6; T7; T8; T9; T10; T15; T20; T25; T27; T30

No 4724

size 2 (1.0 x 5.5 x 25 mm)

No 4734

size 2

No 10760CV/9

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

No 10766/9

sizes T8; T9; T10; T15; T20; T25; T27; T30; T40

180.55

‘

No 4620

€

‘

No 4628

size 1 (0.4 x 2.5 x 60 mm)

‘

No 4630

sizes 1; 2; 3

No 4632

size 4

No 4640

sizes 0; 1; 2

No 4660 VDE

size 1 (0.4 x 2.5 x 75 mm)

No 4724

size 2 (1.0 x 5.5 x 25 mm)

No 4734 No 4744

size 2 size 1

‘

‘ ‘

‘

‘ ‘

‘

201

Screwdrivers for slotted screws r Screwdrivers +

4620

DRALL

r Carburettor screwdrivers DRALL

4724

DIN ISO 2380-1, -2, DIN 5264, ISO 2380-1, -2, stubby, Chrome Alloy Steel, chrome plated, black tips.

DIN ISO 2380-1, -2, DIN 5264, ISO 2380-1, -2, Chrome Alloy Steel, chrome plated, black tips.

‘

size

a mm

b mm

L1 mm

L2 mm

R g

€

1 2 3

0.6 1.0 1.2

3.5 5.5 8.0

25 25 25

80 80 80

34 32 39

10 10 10

5.55 5.55 6.15

b L1

Code ‘

47 24 10 45 47 24 10 60 47 24 10 80

‘

Code

size

a mm

b mm

L1 mm

L2 mm

R g

1 2 3 4 5 6 7

0.6 0.8 1.0 1.2 1.6 1.6 2.0

3.5 4.0 5.5 6.5 8.0 10.0 12.0

75 100 125 150 175 200 250

160 185 240 265 300 325 375

37 40 79 100 136 163 215

10 10 10 10 10 5 5

‘

46 20 10 35 46 20 10 40 46 20 10 55 46 20 10 65 46 20 10 80 46 20 11 00 46 20 11 20 1

€ 4.40 5.25 6.60 7.75 11.50 13.20 15.20

‘

for r Electricians screwdrivers +

4628

slotted screws DRALL

DIN ISO 2380-1, -2, DIN 5264, ISO 2380-1, -2, Chrome Alloy Steel, chrome plated, black tips.

‘

for slotted screws r Screwdrivers +

4621

DRALL

46 28 10 25 46 28 10 35 46 28 20 35 46 28 10 40 46 28 10 55 46 28 20 55 1

‘

size

a mm

b mm

L1 mm

L2 mm

R g

€

0 1 2 3 4 5 6

0.4 0.5 0.6 0.8 1.0 1.2 1.6

2.5 3.5 4.0 5.5 6.5 8.0 10.0

80 90 100 120 140 160 180

165 175 185 235 255 275 305

36 40 42 78 96 117 160

10 10 10 10 10 10 10

4.15 4.25 4.25 6.60 6.60 8.40 11.70

‘

46 21 10 25 46 21 10 35 46 21 10 40 46 21 10 55 46 21 10 65 46 21 10 80 46 21 11 00 1

Code

for slotted screws r Screwdrivers + DRALL

a mm

b mm

L1 mm

L2 mm

R g

€

1 2 3 4 5 6

0.4 0.6 0.6 0.8 1.0 1.0

2.5 3.5 3.5 4.0 5.5 5.5

60 75 100 125 150 200

145 160 185 210 265 315

38 40 41 46 92 102

10 10 10 10 10 10

3.55 3.95 4.50 4.75 5.80 6.70

‘

DIN ISO 2380-1, -2, DIN 5264, ISO 2380-1, -2, with hexagon, Chrome Alloy Steel, chrome plated, black tips.

screwdrivers k Cross-head +

4630

DRALL

Phillips-Recess , DIN ISO 8764-1, -2, ISO 8764-1, -2, Chrome Alloy Steel, chrome plated, black tips. ‘

‘

4622

size

‘

parallel blades, as per VSM (Swiss Standard), Chrome Alloy Steel, chrome plated, black tips.

Code

‘

Code

PH size

L1 mm

L2 mm

R g

€

0 1 2 3

60 80 100 150

145 185 215 275

35 44 90 146

10 10 10 10

4.20 5.45 7.50 10.10

‘

46 30 10 00 46 30 10 01 46 30 10 02 46 30 10 03 ‘

screwdrivers k Cross-head +

4631

DRALL

‘

Code

size

a mm

b mm

L1 mm

L2 mm

R g

1 2 3 4 5 6

1.0 1.2 1.2 1.6 2.0 2.5

5.5 6.5 8.0 10.0 12.0 14.0

100 125 150 175 200 250

215 240 275 300 325 375

85 100 159 174 310 331

10 10 10 10 5 5

‘

46 22 10 55 46 22 10 65 46 22 10 80 46 22 11 00 46 22 11 20 46 22 11 40 1

€ 7.90 10.20 13.10 14.60 19.50 24.90

‘

Phillips-Recess®, extra long, DIN ISO 8764-1, -2, ISO 8764-1, -2, Chrome Alloy Steel, chrome plated, black tips. ‘

Code

PH size

L1 mm

L2 mm

R g

1 2

250 250

355 365

110 122

1 1

‘

46 31 10 01 46 31 10 02

€ 13.90 18.00

‘

for slotted screws r Screwdrivers +

4622SK

screwdrivers k Cross-head +

4632

DRALL

DIN ISO 2380-1, -2, DIN 5264, ISO 2380-1, -2, with impact cap and hexagonal shank, Chrome Alloy Steel, chrome plated, black tips.

with hexagon, Phillips-Recess®, DIN ISO 8764-1, -2, ISO 8764-1, -2, Chrome Alloy Steel, chrome plated, black tips.

‘

Code

size

a mm

b mm

L1 mm

L2 mm

R g

1 2 3 4 5 6 7

0.8 1.0 1.2 1.2 1.6 2.0 2.5

4.0 5.5 6.5 8.0 10.0 12.0 14.0

90 100 125 150 175 200 250

195 215 240 275 300 325 375

50 106 135 191 226 267 340

10 10 5 5 5 5 5

‘

46 22 00 40 46 22 00 55 46 22 00 65 46 22 00 80 46 22 01 00 46 22 01 20 46 22 01 40 1

‘

202

€ 9.40 10.90 12.70 15.70 16.50 24.30 30.20

‘

Code

PH size

L1 mm

L2 mm

R g

1 2 3 4

80 100 150 200

185 215 275 325

45 100 170 237

10 10 5 5

‘

46 32 10 01 46 32 10 02 46 32 10 03 46 32 10 04 ‘

€ 6.15 9.15 14.00 20.50

screwdrivers k Cross-head +

4632SK

+ n TORX® screwdrivers DRALL

4650

DRALL

for inside TORX® screws, Chrome Alloy Steel, chrome plated, black tips.

with impact cap and hexagonal shank, Phillips-Recess , DIN ISO 8764-1, -2, ISO 8764-1, -2, Chrome Alloy Steel, chrome plated, black tips.

‘

Code

size

C mm

L1 mm

L2 mm

R g

T5 U T6 T7 T8 T9 T10 T15 T20 T25 T27 T30 T40 T45

1.4 1.6 2.0 2.3 2.5 2.7 3.3 3.8 4.4 5.0 5.5 6.6 7.8

60 60 60 60 60 80 80 100 100 115 115 115 130

145 145 145 145 145 165 165 205 205 230 230 240 255

30 35 35 35 35 40 38 46 50 90 90 131 136

5 5 5 5 5 5 5 5 5 5 5 5 5

‘

Code

PH size

L1 mm

L2 mm

R g

1 2 3

85 100 150

190 215 275

58 130 194

10 10 5

‘

46 32 00 01 46 32 00 02 46 32 00 03

€ 9.35 11.60 15.70

‘

k Cross-head screwdrivers DRALL

4734

Phillips-Recess®, DIN ISO 8764-1, -2, ISO 8764-1, -2, stubby, Chrome Alloy Steel, chrome plated, black tips.

46 50 10 05 46 50 10 06 46 50 10 07 46 50 10 08 46 50 10 09 46 50 10 10 46 50 10 15 46 50 10 20 46 50 10 25 46 50 10 27 46 50 10 30 46 50 10 40 46 50 10 45 1

€ 5.70 5.70 5.70 6.90 6.90 6.95 7.20 7.50 7.90 8.95 8.95 10.50 12.70

‘ ‘

Code

PH size

L1 mm

L2 mm

R g

€

1 2

25 25

80 80

27 31

10 10

5.55 5.85

‘

47 34 10 01 47 34 10 02

TCS 4650

ö x

‘

+ t Screwdrivers DRALL

4636

TORQ-SET®, hexagonal blade, phosphatised.

175 x 350 x 35 mm, 8 pieces ‘

‘

Code

L1 mm

L2 outside mm E''

2 4 6 8 10 1/4

100 100 100 100 100 150

215 215 215 215 215 265

‘

46 36 00 02 46 36 00 04 46 36 00 06 46 36 00 08 46 36 00 10 46 36 00 16 1

1/4 1/4 1/4 1/4 1/4 5/16

R g

92 93 92 93 93 138

5 5 5 5 5 5

€ 15.70 15.70 15.70 15.70 15.70 23.80

Code

R g

€

350

83.75

‘

96 83 87 67 ‘

No 4650

sizes T8; T9; T10; T15; T20; T25; T27; T30

‘

+ n TORX® screwdrivers DRALL

4650L

‘

for inside TORX screws, extra long, Chrome Alloy Steel, chrome plated, black tips.

screwdrivers l Cross-head +

4640

DRALL

‘

POZIDRIV/SUPADRIV®, DIN ISO 8764-1, -2, ISO 8764-1, -2, Chrome Alloy Steel, chrome plated, black tips.

Code

size

C mm

L1 mm

L2 mm

R g

T15 T20 T25 T30

3.3 3.8 4.4 5.5

250 250 250 250

335 355 355 365

52 64 66 122

5 5 5 5

‘

46 50 11 15 46 50 11 20 46 50 11 25 46 50 11 30

€ 9.40 9.55 10.40 11.10

‘ ‘

Code

PZ size

L1 mm

L2 mm

R g

0 1 2 3

60 80 100 150

145 185 215 275

35 44 89 145

10 10 10 5

‘

46 40 10 00 46 40 10 01 46 40 10 02 46 40 10 03

€ 5.90 7.20 9.05 12.30

‘

l Cross-head screwdrivers DRALL

4744

POZIDRIV/SUPADRIV®, DIN ISO 8764-1, -2, ISO 8764-1, -2, stubby, Chrome Alloy Steel, chrome plated, black tips. ‘

Code

PZ size

L1 mm

L2 mm

R g

€

1 2

25 25

80 80

28 34

10 10

6.80 7.55

‘

47 44 10 01 47 44 10 02 ‘

203

Screwdrivers + o TORX® screwdrivers DRALL

4656

TCS 4660/4665

ö x

with hollow point (TORX TAMPER RESISTANT), Chrome Alloy Steel, chrome plated, black tips.

175 x 350 x 40 mm, 6 pieces

‘

Code

size

C mm

L1 mm

L2 mm

R g

T8 T9 T10 T15 T20 T25 T27 T30 T40 T45

2.3 2.5 2.7 3.3 3.8 4.4 5.0 5.5 6.6 7.8

60 60 80 80 100 100 115 115 115 130

145 145 165 165 205 205 230 230 240 255

39 35 39 39 42 46 90 90 120 118

5 5 5 5 5 5 5 5 5 5

‘

46 56 00 08 46 56 00 09 46 56 00 10 46 56 00 15 46 56 00 20 46 56 00 25 46 56 00 27 46 56 00 30 46 56 00 40 46 56 00 45 1

€ 7.90 7.90 7.90 8.20 8.55 10.10 10.50 10.90 13.50 14.30

‘

Code 96 83 87 66

€

400

65.85

‘

No 4660 VDE

size 1 (0.4 x 2.5 x 75 mm); size 3 (0.6 x 3.5 x 100 mm); size 5 (1.0 x 5.5 x 125 mm); size 6 (1.2 x 6.5 x 150 mm)

No 4665 VDE

size 1; 2

‘

screwdrivers r Electricians +

4660 VDE

‘

10507N KK

R g

‘

DRALL

hexagon drivers i Ball ended +

IEC 60900 C, safety insulated, blade gunmetal finished, Chrome Alloy Steel.

DRALL

for use on hexagon socket head screws, swivel angle up to 25° each side, Chrome Alloy Steel, chrome plated, black tips. ‘

‘

Code

B mm

L1 mm

L2 mm

R g

3 5

300 300

385 415

56 132

5 5

‘

73 10 10 03 73 10 10 05

€ 11.20 12.80

‘

Code

size

a mm

b mm

L1 mm

L2 mm

R g

€

1 2 3 4 5 6 7

0.4 0.5 0.6 0.8 1.0 1.2 1.2

2.5 3.0 3.5 4.0 5.5 6.5 8.0

75 100 100 100 125 150 175

160 185 205 205 240 265 300

43 39 42 46 90 115 170

10 10 10 10 10 10 10

4.60 5.45 5.45 6.45 8.05 10.10 13.60

‘

46 60 10 25 46 60 10 30 46 60 10 35 46 60 10 40 46 60 10 55 46 60 10 65 46 60 10 80 1

VDE-insulated Screwdrivers IEC 60900 C T AC 1000 V

‘

High quality materials and stringent tests guarantee safe use on “live” lines up to 1000 V or 1500 V DC. Individually tested at 10 000 V. 4695 VDE

Screwdriver set DRALL

screwdrivers k Cross-head +

4665 VDE

DRALL

Phillips-Recess®, IEC 60900 C, safety insulated, blade gunmetal finished, Chrome Alloy Steel.

‘

Set with 6 screwdrivers DRALL , IEC 60900 C, safety insulated. z AC 1000 V Content: r 4660 VDE: size 1 (0.4 x 2.5 x 75 mm) size 3 (0.6 x 3.5 x 100 mm) size 5 (1.0 x 5.5 x 125 mm) size 6 (1.2 x 6.5 x 150 mm) k 4665 VDE: size 1, size 2

Code

PH size

L1 mm

L2 mm

R g

€

0 1 2 3

60 80 100 150

145 185 215 275

35 47 89 159

10 10 10 10

5.20 6.35 8.80 13.50

‘

46 65 10 00 46 65 10 01 46 65 10 02 46 65 10 03 ‘

screwdrivers l Cross-head +

4670 VDE

DRALL

‘

Code

R g

620

‘

96 46 95 10

€

POZIDRIV/SUPADRIV , IEC 60900 C, safety insulated, blade gunmetal finished, Chrome Alloy Steel.

43.35

‘ ‘

Code

PZ size

L1 mm

L2 mm

R g

€

0 1 2

60 80 100

145 185 215

36 46 89

10 10 10

6.45 8.30 10.50

‘

46 70 10 00 46 70 10 01 46 70 10 02 ‘

204

TCS 4724/4840+10767

Screwdrivers 4891

ö x

3K DRALL set of screwdrivers

Set of 6 3K DRALL screwdrivers. Content: r 4820: 0.6 x 3.5 x 75 mm 0.8 x 4.0 x 100 mm 1.0 x 5.5 x 125 mm 1.2 x 6.5 x 150 mm k 4830: size 1; size 2

530 x 350 x 45 mm, 24 pieces ‘

R g

Code

€

‘

96 83 07 06

1755

255.30

‘

Code

R g

530

‘

96 48 91 10

€ 44.80

size 1 (0.4 x 2.5 x 60 mm)

No 4724

size 2 (1.0 x 5.5 x 25 mm)

No 4734 No 4744

size 2 size 1

No 4820

0.6 x 3.5 x 75 mm; 0.8 x 4.0 x 100 mm; 1.2 x 6.5 x 150 mm; 1.6 x 10.0 x 200 mm; 2.0 x 12.0 x 250 mm

No 4830 No 4840

sizes 1; 2; 3 size 1

No 10767/9

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

‘

4892

No 4628 ‘

‘

3K DRALL set of screwdrivers

Set of 8 3K DRALL screwdrivers. Content: r 4820: 0.6 x 3.5 x 75 mm 0.8 x 4.0 x 100 mm 1.0 x 5.5 x 125 mm 1.2 x 6.5 x 150 mm 1.6 x 8.0 x 175 mm k 4830: size 1; size 2; size 3

‘

Code

745

‘

96 48 92 10

No 7756

R g

‘

€

‘

4899

r 3K DRALL screwdrivers for

4820 3K DRALL set of TORX® screwdrivers

slotted screws

DIN 5265, ISO 2380, Chrome Alloy Steel, matt chrome plated, black tips.

Set of 9 3K DRALL screwdrivers for TORX® screws (TORX® TAMPER RESISTANT). Content: o 4856: T8, T9; T10; T15; T20; T25; T27; T30; T40 (with hollow point)

‘

Code R g

513

‘

96 48 99 10

a mm

b mm

L1 mm

L2 mm

R g

0.6 0.8 1.0 1.2 1.6 1.6 2.0

3.5 4.0 5.5 6.5 8.0 10.0 12.0

75 100 125 150 175 200 250

170 195 220 265 290 315 375

23 32 58 100 118 158 218

10 10 10 10 10 5 5

‘

Code

O 6 mm

No 12922E ‘

69.60

€ 98.75

‘

TCS 4820/4830

48 20 10 35 48 20 10 40 48 20 20 55 48 20 10 65 48 20 10 80 48 20 11 00 48 20 21 00 1

€ 6.25 6.40 7.60 8.55 12.80 14.00 17.00

‘

ö x

k 3K DRALL cross-head

4830

screwdrivers

Phillips-Recess®, DIN 5262, ISO 8764, Chrome Alloy Steel, matt chrome plated, black tips.

175 x 350 x 35 mm, 7 pieces ‘

Code

R g

€

555

75.40

‘

96 83 81 84 ‘

No 4820

0.6 x 3.5 x 75 mm; 0.8 x 4.0 x 100 mm; 1.0 x 5.5 x 125 mm; 1.2 x 6.5 x 150 mm

‘

Code

PH size

L1 mm

L2 mm

R g

0 1 2 3 4

60 80 100 150 200

155 175 215 275 325

28 33 70 126 251

10 10 10 5 5

‘

48 30 10 00 48 30 10 01 48 30 10 02 48 30 10 03 48 30 10 04 1

€ 6.15 6.85 9.15 12.00 15.00

‘

No 4830

sizes 1; 2; 3

‘

205

Screwdrivers l 3K DRALL cross-head

4840

Electronics Screwdrivers

screwdrivers

POZIDRIV/SUPADRIV®, DIN 5262, ISO 8764, Chrome Alloy Steel, matt chrome plated, black tips.

4797

‘

Code

PZ size

L1 mm

L2 mm

R g

1 2

80 100

175 215

33 70

10 10

‘

48 40 10 01 48 40 10 02

€ 8.05 10.10

Electronics screwdrivers set

7 pieces Content: r 4751: size 4 (0.3 x 1.5 x 40 mm) size 6 (0.4 x 2.0 x 60 mm) size 7 (0.4 x 2.5 x 75 mm) size 8 (0.5 x 3.0 x 75 mm) k 4752: size 00, size 0, size 1

‘

TCS 4856

ö x

‘

Code

R g

285

‘

96 47 97 10

€ 41.50

‘

175 x 350 x 40 mm, 7 pieces ‘

Code

€

447

88.45

‘

96 83 87 55

r Screwdrivers for slotted screws

4751

R g

‘

No 4856

sizes T8; T9; T10; T15; T20; T25; T30

‘

o 3K DRALL TORX screwdrivers

Code

4856

with hollow point (TORX® TAMPER RESISTANT), Chrome Alloy Steel, matt chrome plated, black tips. ‘

Code

48 56 00 06 48 56 00 07 48 56 00 08 48 56 00 09 48 56 00 10 48 56 00 15 48 56 00 20 48 56 00 25 48 56 00 27 48 56 00 30 48 56 00 40 1

47 51 00 01 47 51 00 02 47 51 00 03 47 51 00 04 47 51 00 05 47 51 00 06 47 51 00 07 47 51 00 08 1

size

C mm

L1 mm

L2 mm

R g

T6* T7 T8 T9 T10 T15 T20 T25 T27 T30 T40

1.6 2.0 2.3 2.5 2.7 3.3 3.8 4.4 5.0 5.5 6.6

50 50 60 60 80 80 100 100 115 115 115

145 145 155 155 175 175 215 215 230 230 240

45 37 50 50 26 52 32 55 58 63 86

5 5 5 5 5 5 5 5 5 5 5

‘

size

a mm

b mm

L1 mm

L2 mm

R g

1 2 3 4 5 6 7 8

0.16 0.18 0.25 0.3 0.3 0.4 0.4 0.5

0.8 1.0 1.2 1.5 1.8 2.0 2.5 3.0

40 40 40 40 60 60 75 75

140 140 140 140 160 160 175 175

12 12 12 19 10 19 14 16

5 5 5 5 5 5 5 5

‘

€ 7.70 8.65 8.65 8.65 8.75 9.20 9.80 11.80 12.80 13.00 16.10

€ 6.15 6.15 5.50 4.55 4.05 4.15 4.30 4.30

‘

k Cross-head screwdrivers

4752 ®

Phillips-Recess . ‘

Code

size

L1 mm

L2 mm

00 0 1

40 60 80

140 160 180

k americ. O M No. mm

R g

19 13 24

5 5 5

‘

47 52 00 10 47 52 00 20 47 52 00 01

– –2 2–3

– 0–1 2–4

2.5 3 4.5

€ 6.15 5.40 5.00

‘

* without hollow point

4753

‘

i Hexagon socket screwdrivers

‘

Code

B mm/''

L1 mm

L2 mm

R g

0.7 / 0.028 0.9 / 0.035 1.3 / 0.050 1.5

40 40 40 50

140 140 140 150

14 14 19 18

5 5 5 5

‘

47 53 00 07 47 53 00 09 47 53 00 13 47 53 00 15 ‘

206

€ 5.90 5.65 4.85 4.85

4798

Set of reversible screwdrivers

c Nut spinners DRALL

12506

flexible, max. torque 8 N m, matt chrome plated.

11 pieces Content: r 0.6 x 3.5; 0.8 x 4.0; 1.0 x 5.5; 1.2 x 6.5 mm k sizes 1; 2 l sizes 1; 2 i 3; 4; 5; 6 mm i 3; 4; 5; 6 mm (ball end) n T10; T15; T20; T25; T30; T40

‘

Code

A mm

L1 mm

L2 mm

R g

6 7 8

150 150 150

265 265 265

167 168 170

10 10 10

‘

43 10 02 06 43 10 02 07 43 10 02 08

€ 14.60 14.70 14.80

‘

c T-handled nut spinners

12507-2K

with 2-component T-handle, Chrome Vanadium, matt chrome plated. ‘

Code

R g

675

‘

96 47 98 01

€ 98.50

‘

r EURO voltage tester

10554

built to conform to the new EN standard, tested to conform to the currently valid VDE GS standard, with plastic handle, AC 125–250 V.

‘

Code

‘

Code

a mm

b mm

L mm

R g

€

3.5

190

4.20

‘

77 45 00 01

A mm

L1 mm

L2 mm

R g

6 7 8 9 10 11 12 13

200 200 200 200 200 200 200 200

224 234 234 234 234 240 240 240

83 133 135 137 141 169 171 176

10 10 10 10 10 5 5 5

‘

ES 12500N/7

43 23 20 60 43 23 20 70 43 23 20 80 43 23 20 90 43 23 21 00 43 23 21 10 43 23 21 20 43 23 21 30 1

€ 11.70 15.60 15.60 15.60 16.50 17.60 18.40 18.70

‘

r Offset screwdrivers

10546

DIN 5200, for slotted screws, centre handle covered with impact proof plastic, Chrome Vanadium, chrome plated. 175 x 350 x 39 mm, 7 pieces ‘

R g

Code ‘

96 83 82 00

1060

€

96.00

‘

No 12500N

sizes 7; 8; 9; 10; 11; 12; 13 mm

‘

83 81 30 85

Empty tray

103

8.35

‘

Code

size

a mm

b mm

L mm

R g

€

1 2 3 4

0.6 0.8 1 1.2

3.5 4 5.5 8

90 100 125 150

8 12 29 69

10 10 10 10

5.55 6.20 7.20 8.75

‘

c Nut spinners DRALL

12500N

73 27 20 01 73 27 20 02 73 27 20 03 73 27 20 04

DIN 3125, Chrome Vanadium, chrome plated.

‘

10551

‘

Code

A mm

L1 mm

L2 mm

R g

4 4.5 5 5.5 6 7 8 9 10 11 12 13

125 125 125 125 125 125 125 125 125 125 125 125

230 230 230 230 240 240 240 240 240 250 250 250

58 49 58 58 98 114 115 118 122 160 168 170

10 10 10 10 10 10 10 10 10 5 5 5

‘

43 09 10 04 43 09 10 45 43 09 10 05 43 09 10 55 43 09 10 06 43 09 10 07 43 09 10 08 43 09 10 09 43 09 10 10 43 09 10 11 43 09 10 12 43 09 10 13 1

€ 8.55 8.55 8.55 8.80 8.55 9.65 9.90 10.70 11.00 14.70 15.50 16.20

k Offset screwdrivers

DIN 5208, for recessed head screws, Phillips-Recess®, centre handle covered with impact proof plastic, Chrome Vanadium, chrome plated. ‘

Code

PH size

L mm

R g

€

1x2 2x3

125 150

30 72

10 10

6.70 10.50

‘

73 28 20 12 73 28 20 23 ‘

‘

207

Screwdrivers 10760CV R/8

Hexagon key wrenches

i Hexagon key wrenches

10760CV

DIN ISO 2936 (metric), for socket head screws, Chrome Vanadium, nickel-plated (sizes 0.7; 0.9; 1.3 mm gunmetal finish).

on ring, for socket head screws, Chrome Vanadium, nickel-plated.

‘

Code

B mm/''

L1 mm

L2 mm

R g

0.7/0.028 0.9/0.035 1.3/0.050 1.5 2 2.5 3 3.5 4 5 6 7 8 9 10 11 12 14 17 19 22 24 27 30 32 36

8 10 12 14 16 18 20 22 25 28 32 34 36 38 40 42 45 56 63 70 80 90 100 112 125 140

32 32 40 45 50 56 63 66 70 80 90 95 100 105 112 119 125 140 160 180 200 224 250 280 315 355

1 1 1 1 2 3 4 7 10 18 29 42 59 80 103 130 169 261 442 603 938 1248 1692 2434 3117 4430

‘

Code

R g

260

‘

96 43 15 21

€ 9.65

‘

Content: 2; 2.5; 3; 4; 5; 6; 8; 10 mm ‘

43 15 00 70 43 15 00 90 43 15 01 30 43 15 01 50 43 15 00 02 43 15 02 50 43 15 00 03 43 15 03 50 43 15 00 04 43 15 00 05 43 15 00 06 43 15 00 07 43 15 00 08 43 15 00 09 43 15 00 10 43 15 00 11 43 15 00 12 43 15 00 14 43 15 00 17 43 15 00 19 43 15 00 22 43 15 00 24 43 15 00 27 43 15 00 30 43 15 00 32 43 15 00 36 1

Hexagon key wrenches in holder, DIN ISO 2936 (metric), for socket head screws, Chrome Vanadium, nickel-plated.

‘

Code

R g

10760CV/9 1) 10760aCV/10Pc 2) 10760aCV/13 3)

245 269 124

1 1 1

‘

96 43 15 01 96 43 55 01 96 43 55 02

€ 10.10 10.50 11.50

‘

) Content: 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm ) Content: 1/16; 5/64; 3/32; 1/8; 5/32; 3/16; 7/32; 1/4; 5/16; 3/8'' (in plastic-wallet) 3 ) Content (in two holders): 0.028; 0.035; 0.050; 1/16; 5/64; 3/32; 7/64; 1/8; 9/64; 5/32; 3/16; 7/32; 1/4'' 2

S 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 1 1 1 1 1 1

€ 1.30 1.30 0.85 0.55 0.55 0.55 0.70 0.70 0.85 1.20 1.25 1.40 1.70 2.25 2.65 3.25 3.60 5.60 10.10 14.40 25.30 28.80 35.00 64.50 76.00 88.00

‘

10760aCV

i Hexagon key wrenches

‘

Code

B mm/''

L1 mm

L2 mm

R g

8 10 12 14 15 16 17 20 22 23 25 29 32 32 35 40 41 45 48 50 57 59 70 80

32 32 40 45 45 50 51 54 57 63 65 70 80 87 95 98 105 110 124 133 152 160 180 200

1 1 1 1 1 2 3 4 5 7 10 15 23 32 45 59 75 95 143 200 380 380 605 945

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 1

‘

43 15 00 70 43 15 00 90 43 15 01 30 43 55 00 03 43 55 00 04 43 55 00 05 43 55 00 06 43 55 00 07 43 55 00 08 43 55 00 09 43 55 00 10 43 55 00 12 43 55 00 14 43 55 00 16 43 55 00 18 43 55 00 20 43 55 00 22 43 55 00 24 43 55 00 28 43 55 00 32 43 55 00 34 43 55 00 36 43 55 00 40 43 55 00 44 1

‘

208

0.7/0.028 0.9/0.035 1.3/0.050 3/64 1/16 5/64 3/32 7/64 1/8 9/64 5/32 3/16 7/32 1/4 9/32 5/16 11/32 3/8 7/16 1/2 9/16 5/8 3/4 7/8

€ 1.30 1.30 0.85 0.55 0.55 0.55 0.55 0.90 0.95 0.95 0.95 1.20 1.30 1.45 1.60 1.70 2.40 2.75 3.85 4.55 6.05 9.80 15.50 27.90

i Hexagon key wrenches

10765/9

n Key wrenches

10766 ®

for socket head screws, DIN ISO 2936, extra long, in holder, Chrome Vanadium, nickel-plated. Content: 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

for inside TORX screws, Chrome Vanadium, chrome plated.

‘

size

C mm

L1 mm

L2 mm

R g

€

T6 T7 T8 T9 T10 T15 T20 T25 T27 T30 T40 T45 T50 T55 T60

1.6 2.0 2.3 2.5 2.7 3.3 3.8 4.4 5.0 5.5 6.6 7.8 8.8 11.2 13.2

16 16 16 16 17 18 19 20 21 24 26 29 32 35 38

38 41 44 48 51 54 57 60 64 70 76 83 95 108 120

2 2 3 3 3 5 7 9 15 20 29 42 61 122 185

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

4.00 4.00 4.00 4.00 4.40 4.50 4.60 4.75 5.20 5.45 6.50 7.85 9.75 14.60 15.60

‘

Code

410

‘

96 43 21 01

Code

R g

‘

€ 12.30

‘

i Hexagon key wrenches

10765

43 22 00 06 43 22 00 07 43 22 00 08 43 22 00 09 43 22 00 10 43 22 00 15 43 22 00 20 43 22 00 25 43 22 00 27 43 22 00 30 43 22 00 40 43 22 00 45 43 22 00 50 43 22 00 55 43 22 00 60 1

DIN ISO 2936, for socket head screws, extra long, Chrome Vanadium, nickel-plated.

‘

Code

B mm

L1 mm

L2 mm

R g

1.5 2 2.5 3 4 5 6 7 8 9 10 12 14 17 19

14 16 18 20 25 28 32 34 36 38 40 45 56 63 70

90 100 112 126 140 160 180 190 200 210 224 250 280 320 360

3 3 5 9 17 31 50 74 100 135 179 287 440 742 1048

10 10 10 10 10 10 10 10 10 10 10 5 5 5 5

‘

43 21 00 15 43 21 00 02 43 21 00 25 43 21 00 03 43 21 00 04 43 21 00 05 43 21 00 06 43 21 00 07 43 21 00 08 43 21 00 09 43 21 00 10 43 21 00 12 43 21 00 14 43 21 00 17 43 21 00 19 1

‘

€ 0.65 0.65 0.90 0.90 1.25 1.50 1.55 2.80 3.40 4.20 4.45 5.80 9.25 16.00 22.20

n Key wrenches

10771/8

for inside TORX® screws, extra long, with ball end on long arm, swivel angle up to 25° each side, in holder, Chrome Vanadium, gunmetal finished. Content: sizes T9; T10; T15; T20; T25; T27; T30; T40 ‘

Code

R g

290

‘

96 43 27 01

€ 38.10

‘

n Key wrenches

10771

Key wrenches

for inside TORX screws, extra long, with ball end on long arm, swivel angle up to 25° each side, Chrome Vanadium, gunmetal finish.

for inside TORX screws, in holder, Chrome Vanadium, chrome plated.

‘

Code

size

C mm

L1 mm

L2 mm

R g

T10 T15 T20 T25 T27 T30 T40

2.7 3.3 3.8 4.4 5.0 5.5 6.6

23 27 29 33 36 38 43

121 136 148 163 176 191 210

10 15 20 24 28 30 35

5 5 5 5 5 5 5

‘

Code

R g

10766/6 1) 10766/9 2)

101 120

1 1

‘

96 43 22 01 96 43 22 02 ‘

) Content: sizes T15; T20; T25; T27; T30; T40 ) Content: sizes T8; T9; T10; T15; T20; T25; T27; T30; T40

€ 18.50 25.30

43 27 00 10 43 27 00 15 43 27 00 20 43 27 00 25 43 27 00 27 43 27 00 30 43 27 00 40 1

€ 6.05 6.15 6.25 6.70 7.15 7.50 8.70

‘

209

Screwdrivers Ball ended hexagon key wrenches

key wrenches

in holder, Chrome Vanadium, gunmetal finish.

‘

Code

R g

10767/9 1) 10767a/8 2) 10767a/13 3)

420 283 465

5 1 1

‘

96 43 26 01 96 43 57 01 96 43 57 02

i Ball ended hexagon

10767H

€ 25.80 22.30 32.50

‘

for hexagon key wrenches, swivel angle up to 25° each side, with ball end on long arm, facilitates quick, safe work in awkward places, screws stay on the head once attached, Chrome Vanadium, gunmetal finish. ‘

Code

B mm

L1 mm

L2 mm

R g

3 4 5 6 8 10

20 25 28 32 36 40

126 140 160 180 200 224

8 17 30 50 100 175

10 10 10 5 5 5

‘

) Content: 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm 2 ) Content: 5/64; 3/32; 1/8; 5/32; 3/16; 7/32; 1/4; 5/16'' 3 ) Content: 0.050; 1/16; 5/64; 3/32; 7/64; 1/8; 9/64; 5/32; 3/16; 7/32; 1/4; 5/16; 3/8''

46 23 10 03 46 23 10 04 46 23 10 05 46 23 10 06 46 23 10 08 46 23 10 10

‘

10767

Ball ended hexagon key wrenches

‘

for hexagon socket head screws, with ball end on long arm, swivel angle up to 25° each side, Chrome Vanadium, gunmetal finish.

Angled key wrenches in a convenient holder

‘

Code

B mm/''

L1 mm

L2 mm

R g

€

12 14 16 18 20 25 28 32 36 40 45

72 90 100 112 126 140 160 180 200 224 224

1 1.5 3 5.5 9 18 31 50 100 188 297

10 10 10 10 10 10 10 10 10 10 10

2.15 2.70 2.50 2.50 2.40 2.65 3.00 3.85 5.40 6.75 7.75

‘

43 57 01 30 1.3/0.050 43 26 00 15 1.5 43 26 00 02 2 43 26 00 25 2.5 43 26 00 03 3 43 26 00 04 4 43 26 00 05 5 43 26 00 06 6 43 26 00 08 8 43 26 00 10 10 43 26 00 12 12 1

‘

with various different drivers, internal hexagon, ball-end internal hexagon (metric), TORX®. Blades are crafted in high-alloy, corrosion-free chrome nickel steel. Blade points on internal hexagons are chamfered to facilitate insertion into the screw head. 100% greater torque thanks to thickened neck area on ball-end. Holder made of fibreglass reinforced plastic, extremely heavy duty, with an ergonomically shaped grip. Blades are pivotable in the holder up to 270°, making them ideal for work in confined spaces.

i Ball ended hexagon key

10767a

10761a*

wrenches

‘

Code

B mm/''

L1 mm

L2 mm

R g

€

1.3/0.050 1/16 5/64 3/32 7/64 1/8 9/64 5/32 3/16 7/32 1/4 5/16 3/8

12 14 16 18 20 20 23 25 26 29 31 36 38

72 80 89 101 111 121 136 149 163 170 179 189 200

1 1.5 3 5 7 9.5 13 16 27 42 60 102 164

10 10 10 10 10 10 10 10 10 10 10 10 10

2.15 2.15 2.15 2.15 2.15 2.15 2.15 2.25 2.35 2.80 3.25 4.00 5.95

‘

43 57 01 30 43 57 00 04 43 57 00 05 43 57 00 06 43 57 00 07 43 57 00 08 43 57 00 09 43 57 00 10 43 57 00 12 43 57 00 14 43 57 00 16 43 57 00 20 43 57 00 24 1

€ 3.85 4.00 4.30 5.20 7.60 9.80

i inch

Content: 5/64; 3/32; 7/64; 1/8; 9/64; 5/32; 3/16; 7/32; 1/4''

‘

Code

R g

108

R g

148

‘

43 36 00 02

€ 10.10

‘

* to be discontinued ‘

‘

10767H/9

10761TX*

i Set: Ball ended hexagon

n TORX®

Content: T9; T10; T15; T20; T25; T27; T30; T40

key wrenches

‘

for recessed hexagonal screws, swivel angle up to 25° each side, from size 3 mm with ring, with ball end on long arm, facilitates quick, safe work in awkward places, screws stay on the head once attached, in holder, Chrome Vanadium, gunmetal finish. Content: 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

Code ‘

43 36 00 03

€ 19.50

‘

* to be discontinued ‘

10761KK*

i Ball end metric

Content: 4; 5; 6; 8; 10 mm ‘

‘

Code

R g

401

‘

96 43 26 02 ‘

€ 39.40

Code 43 36 00 04 ‘

* to be discontinued ‘

210

R g

230

‘

€ 22.40

ES 10768/6

10768-2K

i Hexagon key wrenches

with 2-component T-handle, for socket head screws, with two tips, Chrome Vanadium, matt chrome plated, black tips.

‘

350 x 350 x 37 mm, 6 pieces

Code

‘

B mm

L1 mm

L2 mm

R g

2 2.5 3 4 5 6 8 10

100 100 150 150 200 200 200 200

125 125 174 176 227 228 235 235

33 42 42 51 73 92 178 247

10 10 10 10 10 10 5 5

‘

Code

R g

€

780

62.40

‘

96 83 81 19 ‘

43 25 20 20 43 25 20 25 43 25 20 30 43 25 20 40 43 25 20 50 43 25 20 60 43 25 20 80 43 25 21 00 1

No 10768

sizes 3; 4; 5; 6; 8; 10 mm

‘

83 81 20 42

Empty tray

209

15.80

‘

€ 8.20 8.40 8.90 10.90 11.40 12.20 16.00 23.00

‘

i T-handled screwdrivers

10768

ES 10769/7

for socket head screws, Chrome Vanadium, matt chrome plated, black tips.

175 x 350 x 35 mm, 7 pieces ‘

Code

‘

Code

B mm

L1 mm

L2 mm

R g

2 2.5 3 4 5 6 8 10

100 100 150 150 200 200 200 200

116 116 166 175 225 225 235 235

10 10 20 40 60 80 150 210

10 10 10 10 10 10 5 5

‘

43 25 00 20 43 25 00 25 43 25 00 30 43 25 00 40 43 25 00 50 43 25 00 60 43 25 00 80 43 25 01 00 1

R g

€

450

54.80

‘

€ 4.95 5.00 5.45 5.80 6.10 6.80 9.25 13.20

‘

TCS 10765/10768/12507/19

ö x

96 83 81 20 ‘

No 10769

sizes T10; T15; T20; T25; T27; T30; T40

‘

83 81 20 43

Empty tray

116

8.15

‘

n TORX®-T-handled screwdrivers

10769

for inside TORX® screws, shaft nickel-plated and chrome plated, tips hardened, Chrome Vanadium, matt chrome plated, black tips.

‘

Code

size

C mm

L1 mm

L2 mm

R g

T8 T9 T10 T15 T20 T25 T27 T30 T40 T45 T50

2.3 2.5 2.7 3.3 3.8 4.4 5 5.5 6.6 7.8 8.8

80 80 100 100 100 110 110 130 130 130 130

96 96 116 116 125 135 135 155 165 165 165

10 10 10 20 30 40 50 60 100 120 140

5 5 5 10 10 10 10 10 10 10 5

‘

530 x 350 x 30 mm, 19 pieces ‘

R g

Code ‘

96 83 06 21

1640

43 29 00 08 43 29 00 09 43 29 00 10 43 29 00 15 43 29 00 20 43 29 00 25 43 29 00 27 43 29 00 30 43 29 00 40 43 29 00 45 43 29 00 50 1

€ 150.30

‘

No 10765/9

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

No 10768

sizes 2.5; 3; 4; 5; 6; 8; 10 mm

No 12507-2K

sizes 8; 10; 13 mm

‘

€ 5.40 5.65 5.70 5.70 5.75 6.15 6.40 7.15 9.80 10.50 11.90

‘

211

Screwdrivers TCS 10769+10771/17

o TORX® screwdrivers with

10769B

T-handle

ö x

with hollow point (TORX® TAMPER RESISTANT), shaft nickel-plated and chrome plated, tips hardened, Chrome Vanadium, matt chrome plated, black tips. ‘

Code

size

C mm

L1 mm

L2 mm

T10 T15 T20 T25 T27 T30 T40 T45

2.7 3.3 3.8 4.4 5.0 5.5 6.6 7.8

100 100 100 110 110 130 130 130

116 116 125 135 135 155 165 165

R g

‘

350 x 350 x 30 mm, 17 pieces ‘

Code

R g

€

730

138.70

‘

96 83 20 99 ‘

No 10769

sizes T9; T10; T15; T20; T25; T30; T40; T45; T50

No 10771/8

sizes T9; T10; T15; T20; T25; T27; T30; T40

43 30 00 10 43 30 00 15 43 30 00 20 43 30 00 25 43 30 00 27 43 30 00 30 43 30 00 40 43 30 00 45 1

20 20 30 40 50 50 100 110

S 5 5 5 5 5 5 5 5

€ 5.85 5.85 6.15 6.40 6.80 7.45 9.90 10.30

‘

10757

‘

Four-sided bradawl

for punching and preparing leather, plastics and other soft materials and for marking holes in wood to prevent wood screws slipping off the mark.

ES 10769B/7

‘

Code

L mm

Blade mm

R g

200

6 x 100

100

‘

77 59 10 00 ‘

175 x 350 x 35 mm, 7 pieces ‘

Code

R g

€

450

56.55

‘

96 83 81 29 ‘

No 10769B

sizes T10; T15; T20; T25; T27; T30; T40

‘

83 81 20 43 ‘

212

Empty tray

116

8.15

€ 5.15

Pliers

STAHLWILLE pliers, cutters & wrenches For accurate work and a powerful grip â&#x20AC;&#x201C; with comfy-fit multi-component handles. When you are working with pliers, your hand needs optimum support and protection in the places where the pressure exerted on the hand is felt most keenly â&#x20AC;&#x201C; through ergonomic handle design. STAHLWILLE has integrated softer layers in these sections of the handles. In this way, they fulfil two important functions. They prevent the hand slipping off the handle and, at the same time,

absorb the shock produced when hard wires are cut. Even with oily or greasy hands, the textured surface ensures you still have a good grip on things. The special plastic we have used is also resistant to aggressive fluids and, at the end of the lifecycle, can be properly disposed of, because it does not contain PVC.

Accurate cutting and gripping! By using high-grade materials and applying our sophisticated manufacturing techniques, we are able to achieve remarkably accurately shaped jaws. Clean, effortless cutting! Thanks to specially hardened, high-precision cutters. Strain-free working and longer tool lifetimes! Thanks to smooth-action lap-joints. Prevents injuries! The anti-slip protection prevents your hands slipping off towards the jaws. Longer tool lifetime and resistance to aggressive fluids! Thanks to impactresistant, extremely hard-wearing special plastic.

214

No pinch marks and strain-free working! The ergonomically positioned softer layers improve force transmission.

STAHLWILLE VDE pliers & cutters STAHLWILLE VDE pliers & cutters are manufactured to meet the current demands of EN 60900 and are individually tested. They are designed to provide maximum possible protection when the user is working with voltages of 1,000 volts AC.

Voltage testing All STAHLWILLE VDE pliers and cutters are tested to AC 10,000 volts and are certified up to 1,000 volts. In other words, with a tenfold safety margin.

Pressure tests When they are subjected to a load of 20 N m and a temperature of 70 °C, there must be no dielectric breakdown or arcing when the tools are subjected to 5,000 volts AC.

The electrical insulation After being submerged in water for 24 hours, the pliers and cutters are subjected to 10,000 volts AC and, at the same time, the leakage current is measured for three minutes. There must be no dielectric breakdown or arcing.

Testing the adherence of the PVC coating The handles must still be firmly attached to the tools after about 168 hours in a heat cabinet at 70 °C. This stripping test on the PVC covers is carried out for three minutes at 500 N.

Cold impact tests The insulating handles are subjected to 2 hours at –25°C in a freezer and must still be tough enough not to shatter or break when knocked.

Testing resistance to fire The danger of fire can only be combatted through the use of non-flammable PVC. During the test, the flame on the handle must not exceed a height of 120 mm within 20 seconds.

215

Pliers Combination Pliers 6501

Combination pliers

DIN ISO 5746, precision cutting edges for all wires, incl. piano wire, induction hardened cutting edges, approx. 62 HRC, for long life.

65 01 3 160

65 01 5 160

65 01 6 160

‘

Code

L mm

Head

Handles

R g

€

polished

multi-component handles with softer layers

chrome plated

multi-component handles with softer layers

polished

dip-coated with sure-grip surface

1.8 2 2.5 1.8 2 2.5 1.8 2 2.5

1.5 1.8 2 1.5 1.8 2 1.5 1.8 2

10 12 13 10 12 13 10 12 13

16 16 16 16 16 16 16 16 16

183 250 312 210 250 368 163 190 263

16.10 16.90 19.00 18.00 19.20 21.30 12.30 13.20 15.20

‘

65 01 3 160 65 01 3 180 65 01 3 200 65 01 5 160 65 01 5 180 65 01 5 200 65 01 6 160 65 01 6 180 65 01 6 200

160 180 200 160 180 200 160 180 200

‘

e cutting capacity in mm for hard wire r cutting capacity in mm for piano wire t cutting capacity in mm for cable z cutting capacity in mm2 for cable ‘

Flat Nose Pliers 6507

Flat nose pliers, short

DIN ISO 5745, short, flat serrated jaws.

65 07 5 160

65 07 6 160

‘

Code

L mm

Head

Handles

L3 mm

W mm

D mm

h mm

b mm

R g

€

chrome plated polished

multi-component handles with softer layers dip-coated with sure-grip surface

30 30

17 17

10 10

5 5

9 9

180 151

20.40 17.00

‘

65 07 5 160 160 65 07 6 160 160 ‘

6508

Flat nose pliers, long

DIN ISO 5745, long, flat serrated jaws.

65 08 5 160

65 08 6 160

‘

Code

L mm

Head

Handles

L3 mm

W mm

D mm

h mm

b mm

R g

€

chrome plated polished

multi-component handles with softer layers dip-coated with sure-grip surface

50 50

15 15

8 8

3 3

5 5

160 113

21.50 15.80

‘

65 08 5 160 160 65 08 6 160 160 ‘

6509

Flat nose pliers, long, with cutter

designed for gripping and manipulating electronic components, long, thin, flat serrated jaws, induction hardened cutting edges, approx. 60 HRC, for soft and hard wires.

‘

Code

L mm

Head

Handles

L3 mm

W mm

D mm

h mm

b mm

R g

€

chrome plated

multi-component handles with softer layers

164

30.90

‘

65 09 5 160 160 ‘

216

6510

Mechanics flat nose pliers

designed for use in fine mechanical and electronics industries, flat, slim, long serrated jaws, box joint, for long life, serrated gripping areas.

‘

Code

L mm

Head

Handles

L3 mm

W mm

D mm

h mm

b mm

R g

€

chrome plated

dip-coated with sure-grip surface

13.5

8.5

4.5

128

28.40

‘

65 10 5 190 190 ‘

6516

Mechanics flat nose pliers

designed for use by instrument mechanics, flat blunt, serrated jaws, wear resistant.

‘

Code

L mm

Head

Handles

L3 mm

W mm

D mm

h mm

b mm

R g

€

chrome plated

dip-coated with sure-grip surface

13.5

9.5

2.5

9.5

158

32.60

‘

65 16 5 200 200 ‘

Relay pliers

6511

DIN 5235, Form A, flat pointed, for use on contact and relay springs and on small components, smooth jaws.

‘

Code

L mm

Head

Handles

L3 mm

W mm

D mm

h mm

b mm

R g

€

chrome plated

dip-coated with sure-grip surface

7.5

1.5

21.30

‘

65 11 5 135 140 ‘

6512

Relay pliers

DIN 5235, Form B, flat blunt, for use on contact and relay springs and on small components, smooth jaws.

‘

Code

L mm

Head

Handles

L3 mm

W mm

D mm

h mm

b mm

R g

€

chrome plated

dip-coated with sure-grip surface

7.5

3.5

21.30

‘

65 12 5 135 140 ‘

6513

Relay pliers

DIN 5235, Form C, flat bent, 45° in line with jaws, for use on contact and relay springs and on small components, smooth jaws.

‘

Code

L mm

Head

Handles

L3 mm

W mm

D mm

h mm

b mm

R g

€

chrome plated

dip-coated with sure-grip surface

7.5

3.5

21.50

‘

65 13 5 135 140 ‘

6514

Relay pliers

DIN 5235, Form E, flat bent, 90° angle to jaws, for use on contact and relay springs and on small components, smooth jaws.

‘

Code

L mm

Head

Handles

L3 mm

W mm

D mm

h mm

b mm

R g

€

chrome plated

dip-coated with sure-grip surface

7.5

22.20

‘

65 14 5 135 140 ‘

217

Pliers 6518

Mechanics gripping pliers

Form A, flat blunt, designed for use by instrument mechanics, wide precision jaws, smooth, tapering to 1.5 mm, box joint for precise movement.

‘

Code

L mm

Head

Handles

L3 mm

W mm

D mm

h mm

b mm

R g

€

chrome plated

dip-coated with sure-grip surface

11.5

6.5

22.50

‘

65 18 5 130 130 ‘

6519

Mechanics gripping pliers

Form B, flat pointed, designed for use by instrument mechanics, flat pointed precision jaws, smooth, tapering to 1.5 mm, box joint for precise movement.

‘

Code

L mm

Head

Handles

L3 mm

W mm

D mm

h mm

b mm

R g

€

chrome plated

dip-coated with sure-grip surface

11.5

1.5

22.50

‘

65 19 5 130 130 ‘

Round Nose Pliers 6523

Round nose pliers, short

DIN ISO 5745, for bending wire loops and rings, short, round, ground jaws, fine serrations on gripping areas.

‘

Code

L mm

Head

Handles

L3 mm

W mm

D mm

b mm

R g

€

chrome plated

multi-component handles with softer layers

185

18.50

‘

65 23 5 160 160 ‘

6524

Round nose pliers, long

DIN ISO 5745, for bending wire loops and rings, long, round, ground jaws, fine serrations on gripping areas.

‘

Code

L mm

Head

Handles

L3 mm

W mm

D mm

b mm

R g

€

chrome plated

multi-component handles with softer layers

15.5

8.5

2.5

155

21.10

‘

65 24 5 160 160 ‘

6525

Mechanics round nose pliers

for bending wire loops, round precision jaws, smooth, 1.0 point diameter, box joint for precise movement.

‘

Code

L mm

Head

Handles

L3 mm

W mm

D mm

b mm

R g

€

chrome plated

dip-coated with sure-grip surface

11.5

23.10

‘

65 25 5 130 130 ‘

218

Snipe Nose Pliers 6529

Snipe nose pliers with cutter (radio- or telephone pliers)

DIN ISO 5745, Form A (straight), half round, long tapering, serrated jaws, with burner hole, precision cutting edges for soft and hard wires, induction hardened cutting edges, approx. 60 HRC.

65 29 3 160

65 29 5 160

65 29 6 160

‘

L mm

Code

Head

Handles

polished

multi-component handles with softer layers

chrome plated

multi-component handles with softer layers

polished

dip-coated with sure-grip surface

L3 mm

W mm

D mm

h mm

b mm

R g

€

44 51 73 44 51 73 44 51 73

15 16 17 15 16 17 15 16 17

8 9 9 8 9 9 8 9 9

2.5 3 3 2.5 3 3 2.5 3 3

2 2.5 2.5 2 2.5 2.5 2 2.5 2.5

113 155 197 115 170 220 92 148 187

19.10 20.70 22.40 21.30 23.90 29.40 15.10 15.80 21.10

‘

65 29 3 145 65 29 3 160 65 29 3 200 65 29 5 145 65 29 5 160 65 29 5 200 65 29 6 145 65 29 6 160 65 29 6 200

140 160 200 140 160 200 140 160 200

‘

6530

Snipe nose pliers with cutter (radio- or telephone pliers)

DIN ISO 5745, Form B, bent 45°, half round, long tapering, serrated jaws, with burner hole, precision cutting edges for soft and hard wires, induction hardened cutting edges, approx. 60 HRC.

65 30 3 200

65 30 5 200

65 30 6 200

‘

Code

L mm

Head

Handles

polished

multi-component handles with softer layers

chrome plated

multi-component handles with softer layers

polished

dip-coated with sure-grip surface

L2 mm

L3 mm

W mm

D mm

h mm

b mm

R g

€

24 28 24 28 24 28

55 76 55 76 55 76

16 17 16 17 16 17

9 9 9 9 9 9

3 3.5 3 3.5 3 3.5

2.5 3 2.5 3 2.5 3

170 198 170 220 146 178

22.70 26.40 23.80 29.00 21.80 23.50

‘

65 30 3 160 65 30 3 200 65 30 5 160 65 30 5 200 65 30 6 160 65 30 6 200

160 200 160 200 160 200

‘

6531

Mechanics snipe nose pliers

Form A (straight), designed for use on miniature electronic and mechanical components, haft round extra thin, long tapering jaws with fine serration, box joint for precise movement.

‘

Code

L mm

Head

Handles

L3 mm

W mm

D mm

h mm

b mm

R g

€

chrome plated

dip-coated with sure-grip surface

13.5

2.5

100

25.70

‘

65 31 5 170 170 ‘

6532

Mechanics snipe nose pliers

Form B, bent 45°, designed for use on miniature electronic and mechanical components, half round extra thin, long tapering jaws with fine serrations, box joint for precise movement.

‘

Code

L mm

Head

Handles

L2 mm

L3 mm

W mm

D mm

h mm

b mm

R g

€

chrome plated

dip-coated with sure-grip surface

13.5

2.5

102

28.50

‘

65 32 5 170 170 ‘

219

Pliers 6533

Mechanics snipe nose pliers

half round, long tapering, serrated jaws.

‘

Code

L mm

Head

Handles

L3 mm

W mm

D mm

h mm

b mm

R g

€

chrome plated

dip-coated with sure-grip surface

2.5

129

21.50

‘

65 33 5 160 160 ‘

6534

Mechanics snipe nose pliers

Form A (straight), half round, long tapering, serrated jaws. 65 34 5 200

65 34 5 280

‘

Code

L mm

Head

Handles

L3 mm

W mm

D mm

h mm

b mm

R g

€

chrome plated chrome plated

multi-component handles with softer layers dip-coated with sure-grip surface

76 73

16 20

10 9.5

3 3

2.5 2.5

220 255

25.40 22.70

‘

65 34 5 200 200 65 34 5 280 280 ‘

6535

Mechanics snipe nose pliers

Form B (bent 45°), half round, long tapering, serrated jaws.

65 35 5 200

65 35 5 280

‘

Code

L mm

Head

Handles

L2 mm

L3 mm

W mm

D mm

h mm

b mm

R g

€

chrome plated chrome plated

multi-component handles with softer layers dip-coated with sure-grip surface

28 28

68 66

17 20

9.5 9.5

3.5 3

3 2.5

220 255

27.80 26.80

‘

65 35 5 200 200 65 35 5 280 280 ‘

6538

Mechanics snipe nose pliers

designed for use on miniature mechanical components, half round tapering jaws, wear resisting serration.

‘

Code

L mm

Head

Handles

L3 mm

W mm

D mm

h mm

b mm

R g

€

chrome plated

dip-coated with sure-grip surface

9.5

2.5

157

24.50

‘

65 38 5 200 200 ‘

6536

Snipe nose pliers (needle pliers)

DIN ISO 9655, Form A (straight), designed for use on electronic components, half round, extra long tapering jaws, fine serration.

‘

Code

L mm

Head

Handles

L3 mm

W mm

D mm

h mm

b mm

R g

€

chrome plated

dip-coated with sure-grip surface

8.5

110

24.90

‘

65 36 5 160 160 ‘

220

6537

Snipe nose pliers (needle pliers)

Form B, bent 45°, designed for use on electronic components, half round, extra long tapering jaws, fine serration.

‘

Code

L mm

Head

Handles

L2 mm

L3 mm

W mm

D mm

h mm

b mm

R g

€

chrome plated

dip-coated with sure-grip surface

115

26.40

‘

65 37 5 160 160 ‘

Circlip Pliers 6543

Circlip pliers for inside circlips

DIN 5256 C, straight, H.D. drop forged, precision points. 65 43 4 002

65 43 6 002

‘

Code

size

L mm

tips O mm

for circlip sizes mm

J0 J1 J2 J3 J4 J0 J1 J2 J3 J4

140 140 180 225 320 140 140 180 225 320

0.9 1.3 1.8 2.3 3.2 0.9 1.3 1.8 2.3 3.2

8–13 12–25 19–60 40–100 85–140 8–13 12–25 19–60 40–100 85–140

‘

65 43 4 000 65 43 4 001 65 43 4 002 65 43 4 003 65 43 4 004 65 43 6 000 65 43 6 001 65 43 6 002 65 43 6 003 65 43 6 004

Head

Handles

matt chrome plated

chrome plated, chequered

polished

dip-coated with sure-grip surface

R g

€

90 90 135 195 419 100 100 150 215 462

15.10 15.60 15.80 18.70 35.60 13.50 13.90 14.20 17.70 32.00

R g

€

90 90 135 195 416 100 100 150 215 432

15.10 15.60 17.50 21.20 40.50 13.50 13.90 15.70 19.10 36.70

‘

6544

Circlip pliers for inside circlips

DIN 5256 D, bent 90°, H.D. drop forged, precision points.

65 44 4 021

65 44 6 021

‘

Code

size

L mm

tips O mm

for circlip sizes mm

J 01 J 11 J 21 J 31 J 41 J 01 J 11 J 21 J 31 J 41

130 130 170 215 300 130 130 170 215 300

0.9 1.3 1.8 2.3 3.2 0.9 1.3 1.8 2.3 3.2

8–13 12–25 19–60 40–100 85–140 8–13 12–25 19–60 40–100 85–140

‘

65 44 4 001 65 44 4 011 65 44 4 021 65 44 4 031 65 44 4 041 65 44 6 001 65 44 6 011 65 44 6 021 65 44 6 031 65 44 6 041

Head

Handles

matt chrome plated

chrome plated, chequered

polished

dip-coated with sure-grip surface

‘

221

Pliers 6545

Circlip pliers for outside circlips

DIN 5254 A, straight, H.D. drop forged, precision points, with wear resistant compression spring.

65 45 4 002

65 45 6 002

‘

Code

size

L mm

tips O mm

for circlip sizes mm

A0 A1 A2 A3 A4 A0 A1 A2 A3 A4

140 140 180 210 315 140 140 180 210 315

0.9 1.3 1.8 2.3 3.2 0.9 1.3 1.8 2.3 3.2

3–10 10–25 19–60 40–100 85–140 3–10 10–25 19–60 40–100 85–140

‘

65 45 4 000 65 45 4 001 65 45 4 002 65 45 4 003 65 45 4 004 65 45 6 000 65 45 6 001 65 45 6 002 65 45 6 003 65 45 6 004

Head

Handles

matt chrome plated

chrome plated, chequered

polished

dip-coated with sure-grip surface

R g

€

95 95 145 205 437 105 105 160 232 491

17.50 16.60 17.00 19.30 38.80 15.70 15.00 15.60 17.30 35.10

‘

6546

Circlip pliers for outside circlips

DIN 5254 B, bent 90°, H.D. drop forged, precision points, with wear resistant compression spring.

65 46 4 021

65 46 6 021

‘

Code

size

L mm

tips O mm

for circlip sizes mm

A 01 A 11 A 21 A 31 A 41 A 01 A 11 A 21 A 31 A 41

125 125 170 200 290 125 125 170 200 290

0.9 1.3 1.8 2.3 3.2 0.9 1.3 1.8 2.3 3.2

3–10 10–25 19–60 40–100 85–140 3–10 10–25 19–60 40–100 85–140

‘

65 46 4 001 65 46 4 011 65 46 4 021 65 46 4 031 65 46 4 041 65 46 6 001 65 46 6 011 65 46 6 021 65 46 6 031 65 46 6 041

Head

Handles

matt chrome plated

chrome plated, chequered

polished

dip-coated with sure-grip surface

R g

€

95 95 145 111 431 105 105 160 236 468

19.40 17.00 19.10 21.40 41.10 17.50 15.60 17.00 19.30 37.10

‘

6547

Special circlip pliers for slotted circlips

for slotted circlips (as used on shafts of engines, gearboxes, differentials, clutches etc.), with wear resistant compression spring.

65 47 4 170

65 47 6 170

‘

Code

L mm

Head

Handles

R g

€

matt chrome plated polished

chrome plated, chequered dip-coated with sure-grip surface

154 162

28.30 26.10

‘

65 47 4 170 170 65 47 6 170 170 ‘

222

Waterpump Pliers 6551

Waterpump pliers

DIN ISO 8976 (No 207 c), box joint, 7 adjustment positions (175 mm 6 adjustment positions), anti-squeeze protection, Chrome Vanadium. 65 51 5 240

65 51 6 175

‘

Code

L Jaw opening mm max. mm

Head

Handles

chrome plated black lacquered, jaws polished

multi-component handles with softer layers black lacquered, box frame polished, dip-coated

R g

€

365 173 330 520

25.00 14.20 16.00 25.10

R g

€

221 393 526

24.50 26.00 35.00

‘

65 51 5 240 65 51 6 175 65 51 6 240 65 51 6 300

240 175 240 300

43 26 43 51

‘

6572

Waterpump pliers FastGRIP

registered design, box joint with dual support, fast adjustment on the work piece via push button, freely adjustable, easy super fine adjustment with 10 snap-in points (180 mm), 12 snap-in points (240 mm), 15 snap-in points (300 mm), induction hardened jaw toothing – extremely hard and durable, safety clamping protection against squeezing injuries, Chrome Vanadium.

65 72 6 240

‘

Code

L Jaw opening mm max. mm

Head

Handles

polished

dip-coated with sure-grip surface

‘

65 72 6 180 180 65 72 6 240 240 65 72 6 300 300

28 37 44

‘

6573

PowerGRIP pliers wrench

box joint, fast adjustment via button press directly on the work piece, freely adjustable, easy super fine adjustment, high transmission ratio for noticeable amplification of manual force, for work pieces with parallel surfaces 65 73 5 300 (nuts, screws etc.), also ideal for bending thin parallel work pieces (e.g. metal sheet), parallel jaws without profile to protect surface coated work pieces, “Ratchet effect” for screws by using the jaw stroke, extremely resistant overall construction, high quality tempered. ‘

Code

L Jaw opening mm max. mm

Head

Handles

chrome plated

dip-coated with sure-grip surface

R g

€

275 490 640

51.00 57.50 68.50

‘

65 73 5 180 192 65 73 5 250 253 65 73 5 300 300

36 46 60

‘

6554

Waterpump pliers, with rapid adjustment

DIN ISO 8976 (No 207 c), box joint “hook” adjustment, jaw with slot, Chrome Vanadium. 65 54 4 250

‘

Code

L Jaw opening mm max. mm

Head

Handles

chrome plated

chrome plated, chequered

R g

€

476 1066

49.20 85.00

‘

65 54 4 250 250 1) 65 54 4 375 375

50 70

‘

) anti-squeeze protection

‘

Spare springs for No 6554 ‘

Code

Spare spring for No

R g

‘

69 54 0 002 69 54 0 003

65544250 65544375

3 4

€ 1.85 2.60

‘

223

Pliers 6555

MINI-waterpump pliers

Chrome Vanadium.

‘

Code

L Jaw opening mm max. mm

Head

Handles

R g

€

chrome plated

dip-coated

16.20

‘

65 55 5 125 125

‘

6549

Pipe wrenches

Type B, 45°, DIN 5234.

65 49 0 315 ‘

Code

L size mm

Jaw opening max. mm

1 326 1 1/2 440 2 560

45 61 82

Head

Handles

red lacquered

R g

€

715 1300 2780

46.00 64.50 93.50

‘

65 49 0 315 65 49 0 420 65 49 0 555 ‘

6556

Swedish pattern wrenches

Type A, 90°, DIN 5234.

65 56 0 310 ‘

Code

size

L mm

Jaw opening max. mm

1 1 1/2 2

316 422 542

47 63 82

Head

Handles

red lacquered

R g

€

780 1560 2676

44.70 67.00 101.00

R g

€

811 1595 2677

45.10 65.00 95.00

‘

65 56 0 310 65 56 0 420 65 56 0 560 ‘

6557

S-shaped Swedish pattern wrenches

Type C, DIN 5234.

65 57 0 320 ‘

Code

size

L mm

Jaw opening max. mm

1 1 1/2 2

327 440 560

47 66 81

Head

Handles

red lacquered

‘

65 57 0 320 65 57 0 416 65 57 0 535 ‘

6558

“Heavy Duty” pipe wrenches

US-standard GGG-W-651 Type II, category A.

65 58 0 300 ‘

Code

size

L mm

Jaw opening max. mm

10'' 12'' 14'' 18'' 24''

250 300 350 450 600

49 61 61 77 90

Head

Handles

black lacquered

red lacquered

R g

€

805 1255 1655 2660 4295

25.50 29.60 33.90 48.20 75.50

‘

65 58 0 250 65 58 0 300 65 58 0 350 65 58 0 450 65 58 0 600 ‘

224

6559

“Stillson” pipe wrenches

US-standard GGG-W-651 Type I, category A.

65 59 0 250

‘

Code

size

L mm

Jaw opening max. mm

10'' 12'' 14'' 18'' 24''

250 300 350 450 600

35 43 49 61 77

Head

Handles

black lacquered

red lacquered

R g

€

550 750 1080 1850 3000

22.90 26.20 31.30 42.50 68.50

‘

65 59 0 250 65 59 0 300 65 59 0 350 65 59 0 450 65 59 0 600 ‘

Self Grip Wrenches 6561

Wide jaw self grip wrench

80 mm jaw width, quick release lever, Chrome Vanadium.

‘

L mm

S mm

Head

Handles

R g

€

65 61 2 175 175

bright nickel-plated

364

38.70

Code ‘

‘

6562

Parallel jaw self grip wrench

forged jaws, quick release lever, Chrome Vanadium.

‘

L mm

S mm

Head

Handles

R g

€

65 62 2 250 250

bright nickel-plated

700

42.10

Code ‘

‘

6562/1 6562/2

Parallel jaw self grip wrenches

forged jaws, quick release lever, for small round parts (V-cutout in one jaw) and also suitable for larger workpieces, also ideal for gently gripping sensitive workpieces, Chrome Vanadium.

6562/1

6562/2

‘

L mm

S mm

65 62 2 100 250 65 62 2 200 250

100 200

Code

Head

Handles

bright nickel-plated

R g

€

985 1154

80.50 85.00

‘

Plastic protective jaws for parallel jaw self grip wrenches No 6562/1 and No 6562/2 1 pair, provides additional protection for clamped workpieces. ‘

Code

R g

€

5.45

‘

69 62 0 001 ‘

225

Pliers 6563

Universal self grip wrenches

forged jaws (one straight, one contoured), quick release lever, Chrome Vanadium.

65 63 2 175 ‘

L mm

S mm

65 63 2 175 175 65 63 2 250 250

25 30

Code

Head

Handles

bright nickel-plated

R g

€

320 500

19.00 21.20

‘

6564

Self grip wrenches

forged contoured jaws, quick release lever, wire cutter, Chrome Vanadium.

65 64 2 175 ‘

Code

L mm

S mm

145 175 250 300

14 30 40 65

Head

Handles

bright nickel-plated

R g

€

175 323 550 977

17.20 20.30 21.60 42.10

‘

65 64 2 145 65 64 2 175 65 64 2 250 65 64 2 300 ‘

6565

Welders self grip wrench

with quick release lever, Chrome Vanadium.

‘

L mm

S mm

Head

Handles

R g

€

65 65 2 280 280

bright nickel-plated

941

35.80

Code ‘

‘

6566

Pipe welders self grip wrench

with quick release lever, Chrome Vanadium.

‘

L mm

S mm

Head

Handles

R g

€

65 66 2 280 280

bright nickel-plated

944

37.60

Code ‘

‘

6567

C-Clamp self grip wrenches

with quick release lever, Chrome Vanadium.

65 67 2 280 ‘

L mm

S mm

65 67 2 175 175 65 67 2 280 280

75 85

Code

Head

Handles

bright nickel-plated

R g

€

236 694

17.20 31.80

‘

226

6568

Long reach grip wrenches

extra large capacity, quick release lever, Chrome Vanadium.

65 68 2 460 ‘

L mm

S mm

65 68 2 460 460 65 68 2 600 600

180 240

Code

Head

Handles

bright nickel-plated

R g

‘

1100 1372

€ 76.50 88.50

‘

6571

Long nose self grip wrench

specially suitable for narrow, tapering access, with quick-release lever, Chrome Vanadium.

‘

L mm

S mm

Head

Handles

R g

€

65 71 2 165 165

bright nickel-plated

190

17.30

Code ‘

‘

Various Gripping Pliers 6575

Wire twisting pliers

registered design, for wire locking of metal fasteners, with side cutter, serrated jaws for positive grip, jaws angled by 40°, suitable for locking wires up to O 1.6 mm (dec. in. 0.06), for clockwise and anticlockwise use, with automatic return action, Chrome Vanadium.

65 75 1 280

65 75 1 220

‘

Code

L mm

Head

Handles

gunmetal finish, polished

gunmetal finish

R g

€

330 410

129.00 145.00

‘

65 75 1 220 65 75 1 280

230 280

‘

6576N

Connector pliers

replaceable plastic jaws, 4 adj. positions, for use on screw connections incl. Canon-connectors, or any light alloy or other tube connections, surfaces of which must not be damaged, Chrome Vanadium.

‘

Code

L mm

Head

Handles

R g

€

chrome plated

dip-coated

288

49.60

‘

65 76 5 231 230 ‘

Loose plastic jaws for No 6576N ‘

Code

R g

‘

69 76 0 001

€ 6.65

‘

227

Pliers Side Cutters Side cutters N

6600

DIN ISO 5749, Form B, precision cutting edges for all wires incl. piano wire, high quality alloy steel, bevelled cutting edges induction hardened, approx. 63 HRC.

66 00 3 160

66 00 5 160

66 00 6 160

‘

L mm Head

Code

Handles

e mm

h mm

b mm

R g

€

24 25.7 29.5 32 24 25.7 29.5 32 24 25.7 29.5 32

17 18.5 22.5 23.5 17 18.5 22.5 23.5 17 18.5 22.5 23.5

8.6 8.2 9.5 11 8.6 8.2 9.5 11 8.6 8.2 9.5 11

2.8 3 3 3.8 2.8 3 3 3.8 2.8 3 3 3.8

2.3 2.5 2.8 3 2.3 2.5 2.8 3 2.3 2.5 2.8 3

1.5 1.8 2 2.5 1.5 1.8 2 2.5 1.5 1.8 2 2.5

1.25 1.6 1.6 2 1.25 1.6 1.6 2 1.25 1.6 1.6 2

110 147 188 252 105 160 205 325 100 121 165 205

19.70 21.40 21.80 23.00 20.40 21.80 22.80 24.30 19.10 20.00 17.80 19.40

‘

66 00 3 130 66 00 3 145 66 00 3 160 66 00 3 180 66 00 5 130 66 00 5 145 66 00 5 160 66 00 5 180 66 00 6 130 66 00 6 145 66 00 6 160 66 00 6 180

125 polished multi-component handles with softer layers 140 160 180 125 chrome plated multi-component handles with softer layers 140 160 180 dip-coated with sure-grip surface 125 polished 140 160 180

‘

q Cutting capacity in mm for soft wire e Cutting capacity in mm for hard wire ‘

w Cutting capacity in mm for medium hard wire r Cutting capacity in mm for piano wire

Side cutter M

6601

as No 6600, mini bevel, fitted with double leaf spring.

‘

L mm

Code

Head

Handles

e mm

h mm

b mm

R g

€

polished

dip-coated with sure-grip surface

8.5

2.5

1.5

1.2

0.8

17.50

‘

66 01 6 110 110 ‘

q Cutting capacity in mm for soft wire e Cutting capacity in mm for hard wire ‘

Heavy duty side cutters N

6602

w Cutting capacity in mm for medium hard wire r Cutting capacity in mm for piano wire

DIN ISO 5749, Form A, precision cutting edges for all wires incl. piano wire, high quality alloy steel, bevelled cutting edges induction hardened, approx. 63 HRC.

66 02 3 200

66 02 5 200

66 02 6 200

‘

Code

L mm Head

Handles

e mm

h mm

b mm

R g

€

23.5 25.5 27.5 31 32 23.5 25.5 27.5 31 32 23.5 25.5 27.5 31 32

20 25 26.5 28 29.5 20 25 26.5 28 29.5 20 25 26.5 28 29.5

9 9.5 10.5 11.5 12 9 9.5 10.5 11.5 12 9 9.5 10.5 11.5 12

4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

3.1 3.4 3.8 4 4 3.1 3.4 3.8 4 4 3.1 3.4 3.8 4 4

2 2.5 2.7 3 3.5 2 2.5 2.7 3 3.5 2 2.5 2.7 3 3.5

1.5 2 2.2 2.5 3 1.5 2 2.2 2.5 3 1.5 2 2.2 2.5 3

156 203 251 305 407 145 200 290 310 400 140 170 230 260 375

24.20 25.90 27.40 29.20 33.90 29.00 31.20 32.80 34.60 37.70 22.30 23.20 24.40 25.40 25.90

‘

66 02 3 140 66 02 3 160 66 02 3 180 66 02 3 200 66 02 3 250 66 02 5 140 66 02 5 160 66 02 5 180 66 02 5 200 66 02 5 250 66 02 6 140 66 02 6 160 66 02 6 180 66 02 6 200 66 02 6 250

140 polished multi-component handles with softer layers 160 180 200 250 140 chrome plated multi-component handles with softer layers 160 180 200 250 dip-coated with sure-grip surface 140 polished 160 180 200 250

‘

q Cutting capacity in mm for soft wire e Cutting capacity in mm for hard wire ‘

228

w Cutting capacity in mm for medium hard wire r Cutting capacity in mm for piano wire

6608

Lever action side cutters

DIN ISO 5749, for piano wire, special steel.

66 08 0 190 ‘

Code

L mm

Head

Handles

R g

€

polished

black lacquered

3.7 4.2

3 3.5

510 555

46.90 52.00

‘

66 08 0 190 190 66 08 0 225 225 ‘

w Cutting capacity in mm for medium hard wire r Cutting capacity in mm for piano wire ‘

Oblique Cutter Mechanics oblique cutter M

6612

suitable for use on miniature mechanical and electronic components, precision cutting edges for hard and soft wire, head angled by 28°, Cu-wire 0.25 mm O may be cut at tips, alloy steel of highest quality, induction hardened mini-bevelled cutting edges, approx. 60 HRC.

‘

Code

L mm Head

Handles

e mm

h mm

b mm

R g

€

185 chrome plated

dip-coated with sure-grip surface

13.5

9.5

1.8

1.5

145

26.60

‘

66 12 5 185 ‘

q Cutting capacity in mm for soft wire

w Cutting capacity in mm for medium hard wire e Cutting capacity in mm for hard wire

‘

Top Cutters Top cutters, heavy duty N

6618

DIN ISO 5748, precision cutting edges for all wires, incl. piano wire, alloy steel of highest quality, induction hardened bevelled cutting edges, approx. 63 HRC. 66 18 5 160

66 18 6 160

‘

Code

L mm

Head

Handles

e mm

h mm

b1 mm

b2 mm

R g

€

17 17

26 26

11.5 11.5

24 24

3.8 3.8

3 3

2.5 2.5

2 2

240 225

32.70 27.40

R g

€

2.25 394 2.5 440 2.75 467

53.50 58.00 74.50

‘

66 18 5 160 160 66 18 6 160 160

chrome plated multi-component handles with softer layers dip-coated with sure-grip surface polished

‘

q Cutting capacity in mm for soft wire e Cutting capacity in mm for hard wire ‘

6617

w Cutting capacity in mm for medium hard wire r Cutting capacity in mm for piano wire

Lever action top cutters

DIN ISO 5748, for piano wire, special steel.

66 17 0 215 ‘

Code

L mm

Head

Handles

polished

black lacquered

3.5 4 4

3 3.5 3.5

2.5 2.8 3

‘

66 17 0 180 180 66 17 0 215 215 66 17 0 235 235 ‘

q Cutting capacity in mm for soft wire e Cutting capacity in mm for hard wire ‘

w Cutting capacity in mm for medium hard wire r Cutting capacity in mm for piano wire

229

Pliers Wire Stripping Pliers 6622

Wire stripping pliers

with adjustment screw to cut insulation only on wire or cable, max. 5 mm O 10 mm2 conductor cross-section. 66 22 5 160

66 22 6 160

‘

Code

L mm

Head

Handles

R g

€

chrome plated polished

multi-component handles with softer layers dip-coated with sure-grip surface

195 180

23.30 20.40

‘

66 22 5 160 160 66 22 6 160 160 ‘

6623

Wire stripping pliers

for wires from 0.5 to 5 mm O, self adjusting, cutter hole for cutting wire or stranded wires up to 5 mm O, special steel.

‘

Code

L mm

Head

Handles

R g

€

chrome plated

multi-component handles with softer layers

180

47.00

R g

€

15.50

‘

66 23 5 160 160 ‘

Replacement stripping knives (1 pair) for No 6623 ‘

Code ‘

69 23 0 001 ‘

6624

Wire stripping pliers

for wires from 0.3 to 1.2 mm O, self adjusting, cutter hole for cutting wire or stranded wires up to 5 mm O, special alloy steel.

‘

Code

L mm

Head

Handles

R g

€

chrome plated

multi-component handles with softer layers

186

47.20

‘

66 24 5 160 160 ‘

Cable Shear 6630

Cable shear

for copper- and light alloy cables. Easy, single handed operation. Special cutting edges geometry to avoid pressure marks and frayed ends, adjustable joint, anti-squeeze protection, not suitable for steel- or armoured cables.

‘

Code

L mm

Head

Handles

R g

€

chrome plated

dip-coated with sure-grip surface

332

50.00

‘

66 30 5 220 220 ‘

u cutting capacity in mm2 for single wire Al-/Cu-Cable i cutting capacity in mm2 for multiple wire Al-/Cu-Cable o cutting capacity in mm2 for thin wire Al-/Cu-Cable ‘

230

Crimping Pliers 6634

Crimping pliers

with half round profile, for reliable crimping of terminal sleeves DIN 46228, 8 deep slots with tapering side walls, crimping within the size marked profiles in one operation. ‘

Code

L mm Head

Handles

crimping range mm2

R g

€

220 gunmetal finish

dip-coated with sure-grip surface

0.25; 0.5; 0.75; 1; 1.5; 2.5; 4; 6; 10; 16

240

55.50

‘

66 34 6 220 ‘

6637

Crimping pliers U

for use with terminal sleeves with or without an insulating collar in accordance with DIN 46228 • high precision crimping • easy-action force transmission coupled with simple handling • unlockable autolock • accurately ground profiles • crimp shape: 1 ‘

Code

L mm Head

Handles

crimping range mm2

R g

€

195 gunmetal finish

with plastic sleeves

0.08 - 10

298

180.00

crimping range mm2

R g

€

red = 0.5–1(AWG 20–18); blue = 1.5–2.5 (AWG 16–14); yellow = 4–6 (AWG 12–10)

477

106.00

‘

66 37 0 195 ‘

6638

Crimping pliers U

for red/blue/yellow insulated cable lugs, pin-type cable lugs, flat plugs and sleeves, round plugs and sleeves, butt and parallel connectors • unlockable autolock • easy handling • stripping and cutting device, refer to No 6966 • crimp shape: 5 ‘

Code

L mm Head

Handles

220 gunmetal finish

with plastic sleeves

‘

66 38 0 220 ‘

6639

Crimping pliers U

for non-insulated flat plugs and flat sleeves for nominal DIN widths F2.8; F4.8; F6.3; F9.5 • unlockable autolock • easy handling • stripping and cutting device, refer to No 6966 • crimp shape: 2

‘

Code

L mm Head

Handles

220 gunmetal finish

with plastic sleeves

crimping range mm2

R g

€

0.25–0.5 (AWG 24–20); 0.5–1 (AWG 20–18); 4–6 (AWG 12–10); 1.5–2.5 (AWG 16–14)

483

106.00

crimping range mm2

R g

€

0.1–0.35 (AWG 26–22); 0.5–1 (AWG 20–18); 1.5–2.5 (AWG 16–14); 4–6 (AWG 12–10); 10–16 (AWG 8–6)

465

106.00

‘

66 39 0 220 ‘

6640

Crimping pliers U

for non-insulated cable lugs and tubular cable lugs with closed crimp sleeves • unlockable autolock • easy handling • stripping and cutting device, refer to No 6966 • crimp shape: 3

‘

Code

L mm Head

Handles

220 gunmetal finish

with plastic sleeves

‘

66 40 0 220 ‘

231

Pliers Crimping pliers U

6641

for use with terminal sleeves with or without an insulating collar in accordance with DIN 46228 • unlockable autolock • easy handling • stripping and cutting device, refer to No 6966 • crimp shape: 4

‘

Code

L mm Head

Handles

crimping range mm2

R g

€

220 gunmetal finish

with plastic sleeves

0.14–0.5; 0.75–1.5; 2.5; 4; 6; 10; 16

536

110.00

R g

€

36.30

‘

66 41 0 220 ‘

Stripping and cutting tool U

6966

for stripping wires from 0.5 to 6 mm O. Cables can also be cut. For use with crimping pliers No 6638, 6639, 6640 and 6641.

‘

Code ‘

69 66 0 000 ‘

Various Cutting Pliers 6660

Steel fixers pincers

DIN ISO 9242, limit on opening angle to ensure single-handed closure (registered design), little effort required due to optimised cutter geometry, induction-hardened cutters provide excellent resistance to wear, special steel, drop-forged, oil hardened ‘

Code

L mm

Head

Handles

polished

black lacquered

R g

€

318 420 434

15.80 17.90 20.30

R g

€

322 419

13.80 14.40

‘

66 60 1 220 224 66 60 1 250 250 66 60 1 280 280 ‘

6661

Pincers

DIN ISO 9243, special steel, drop-forged, oil hardened.

‘

Code

L mm

Head

Handles

polished

black lacquered

‘

66 61 1 180 180 66 61 1 200 200 ‘

6662

Heavy Duty steel fixer pincers

DIN ISO 9243, induction-hardened cutting edges, high wear resistance, extremely low cutting force effort due to very large lever effect and optimum cutting edges geometry. Clearly damped cutting shock due to “elastic” pliers body, therefore ideal for continuous use special steel. Ultra-slim design, ideal for binding recessed reinforcing bars. Special steel, drop-forged, oil hardened. ‘

Code

L mm

Head

Handles

R g

€

chrome plated, polished

chrome plated

475

28.90

‘

66 62 4 300 300 ‘

232

6702

Set with 4 pliers, chrome plated

Handles chequered, in plastic inlay Content: 6543 Circlip pliers, J2 6544 Circlip pliers, J21 6545 Circlip pliers, A2 6546 Circlip pliers, A21 ‘

Code

R g

€

590

69.40

‘

96 65 00 04

Sets of pliers in plastic inlays also suitable for Workbench No 92KM G, Tool trolleys 97N, 97N/KM, 97H/8, 97H/KM, Tool boxes No 94N, 94N/KM, Magazine case No 920 and Wheely box No 922N (Modular system see page 33–59)

‘

6706

ES 6501–6602/7A

Set with 3 pliers, polished

dip-coated, in plastic inlay Content: 6501 Combination pliers, 180 mm 6602 Heavy duty side cutter, 160 mm 6529 Snipe nose pliers, 200 mm

530 x 350 x 40 mm, 7 pieces ‘

R g

‘

R g

Code ‘

96 65 00 08

750

€ 57.50

Code ‘

96 83 81 21

€

2085

172.70

307

22.50

‘

No 65 01 5 180

6703

‘

Set with 3 pliers, chrome plated

No 65 29 5 200

multi-component handles with softer layers, in plastic inlay

‘

No 65 43 4 002 ‘

Content: 6501 Combination pliers, 180 mm 6602 Heavy duty side cutter, 160 mm 6529 Snipe nose pliers, 200 mm

No 65 45 4 002 ‘

No 65 51 6 240 ‘

No 65 64 2 250 ‘

‘

R g

Code ‘

96 65 00 05

810

€ 79.80

No 66 02 5 160 ‘

83 81 20 21

Empty tray

‘

6705

ES 6501–6602/7B

Set with 3 pliers, polished

dip-coated, in plastic inlay Content: 6551 Waterpump pliers, 240 mm, lacquered 6501 Combination pliers, 180 mm 6602 Heavy duty side cutter, 160 mm

7 530 x 350 x 40 mm, 7 pieces ‘

R g

‘

Code

R g

€

880

52.40

‘

96 65 00 07

Code ‘

96 83 81 32

€

2055

169.30

307

22.50

‘

No 65 01 5 200 ‘

6704

Set with 3 pliers, chrome plated

No 65 29 5 160 ‘

multi-component handles with softer layers (No 6501, 6602), in plastic inlay

No 65 43 4 002 ‘

No 65 45 4 002

Content: 6551 Waterpump pliers, 240 mm 6501 Combination pliers, 180 mm 6602 Heavy duty side cutter, 160 mm

‘

No 65 51 6 240 ‘

No 65 64 2 250 ‘

No 66 02 5 160 ‘ ‘

Code

€

950

66.40

‘

96 65 00 06

83 81 20 21

R g

Empty tray

‘

233

Pliers TCS 6501–6602/4

TCS 6543–6546/4

ö x

175 x 350 x 35 mm, 4 pieces

175 x 350 x 30 mm, 4 pieces

‘

R g

Code ‘

96 83 81 79

1010

€ 114.40

‘

Code

R g

€

626

88.00

‘

96 83 06 08 ‘

No 65 43 4 002

No 65 01 5 180

‘

No 65 29 5 200

No 65 44 4 021

‘ ‘

No 65 51 6 240

No 65 45 4 002

‘ ‘

No 66 02 5 160 ‘

No 65 46 4 021 ‘

TCS 6501–6602/4N

ö x

TCS 6534–6545/6

ö x

175 x 350 x 35 mm, 4 pieces ‘

R g

Code ‘

96 83 06 22

1080

€ 128.30

‘

No 65 01 5 180

U 350 x 350 x 30 mm, 6 pieces

‘

No 65 29 5 200

R g

‘

Code

No 65 72 6 240

‘

96 83 21 00

‘

1070

‘

No 66 02 5 160

No 65 34 5 280

‘ ‘

No 65 35 5 200

TCS 6543–6564/3

‘

ö x

No 65 43 4 001 No 65 43 4 001 ‘

No 65 45 4 001 No 65 45 4 002 ‘

175 x 350 x 30 mm, 3 pieces ‘

Code

R g

€

815

73.00

‘

96 83 81 80 ‘

No 65 43 4 002 ‘

No 65 45 4 002 ‘

No 65 64 2 250 ‘

234

€ 147.80

Electronics Pliers, suitable for electrostatic discharge (ESD) applications Z Electronics flat nose pliers Z

6517

DIN ISO 9655, designed for use on miniature electronic and mechanical components, welded on double leaf spring, precision jaws, smooth, tapering to 1 mm, box joint for precise movement.

‘

Code

L mm Head

Handles

L3 W D h b R mm mm mm mm mm g

dip-coated with sure-grip surface, ESD applications

‘

65 17 6 120 125 polished

6.5

1.5

€

22.40

‘

Electronics round nose pliers Z

6526

DIN ISO 9655, designed for use on miniature electronic and mechanical components, welded on double leaf spring, round precision jaws, smooth, thin, 1.25 mm point diameter, box joint for precise movement. ‘

Code

L mm Head

Handles

L3 W D mm mm mm

b R mm g

€

dip-coated with sure-grip surface, ESD applications

1.25 45

24.40

‘

65 26 6 120 125 polished

6.5

‘

Electronics snipe nose pliers Z

6540

DIN ISO 9655, designed for use on miniature electronic and mechanical components, welded on double leaf spring, half round, smooth precision jaws tapering to 1 mm O, box joint for precise movement.

‘

Code

L mm

Head

Handles

L3 W D h b R mm mm mm mm mm g

polished

dip-coated with sure-grip surface, ESD applications

€

‘

65 40 6 120 125

6.5

22.80

‘

6603

Electronics side cutter Z M

strong, slim pattern, suitable for use on miniature electronic components, precision cutting edges, mini bevel, suitable for soft and hard wire, incl. piano wire, Cu-wire of 0.2 mm O can be cut at the tips, welded on double leaf spring, alloy steel of highest quality, induction hardened cutting edges approx. 63 HRC.

‘

Code

L mm Head

e h b mm mm mm q w e

dip-coated with sure-grip surface, ESD applications

14 11 6.5 1.5 1 0.8 0.5 60 20.70

‘

66 03 6 115 115 polished

R g

Handles

€

‘

q Cutting capacity in mm for soft wire e Cutting capacity in mm for hard wire ‘

6605

w Cutting capacity in mm for medium hard wire r Cutting capacity in mm for piano wire

Electronics side cutter Z M

DIN ISO 9654, with wire catch to prevent uncontrolled disposal of off-cuts, box joint for precise movement, precision cutting edges, mini bevel, suitable for soft and hard wire, welded on double leaf spring, alloy steel of highest quality, induction hardened cutting edges, approx. 63 HRC. ‘

Code

L mm Head

Handles

e h b mm mm mm q w e

dip-coated with sure-grip surface, ESD applications

13 10.5 7

‘

66 05 6 110 112 polished

R g

€

1.5 1 0.8 0.6 64 31.50

‘

q Cutting capacity in mm for soft wire e Cutting capacity in mm for hard wire ‘

w Cutting capacity in mm for medium hard wire r Cutting capacity in mm for piano wire 235

Pliers 6606

Electronics side cutters Z M

DIN ISO 9654, strong model, box joint for precise movement, precision cutting edges, mini bevel, suitable for piano wire, Cu-wire 0.25 mm O can be cut at tips, welded on double leaf spring, alloy steel of highest quality, induction hardened cutting edges, approx. 63 HRC. ‘

Code

L mm Head

e h b mm mm mm q w e

Handles

‘

66 06 6 110 112 polished 66 06 6 130 125

dip-coated with sure-grip surface, ESD applications

R g

€

13 12 7.5 1.5 1 0.8 0.6 66 27.20 18 16 10 1.7 1.2 1 0.8 104 29.20

‘

q Cutting capacity in mm for soft wire e Cutting capacity in mm for hard wire ‘

6607

w Cutting capacity in mm for medium hard wire r Cutting capacity in mm for piano wire

Electronics side cutters Z L

DIN ISO 9654, slim tapered head for use in confined spaces, box joint for precise movement, precision cutting edges, no bevel suitable for flush cutting of soft and medium hard wire, Cu- and diode wires, welded on double leaf spring, alloy steel of highest quality, induction hardened cutting edges, approx. 63 HRC. ‘

Code

L mm Head

e h b mm mm mm q

Handles

‘

66 07 6 110 112 polished 66 07 6 130 125

dip-coated with sure-grip surface, ESD applications

13 12 7.5 1.5 1 18 16 10 1.5 1

R g

€

64 104

28.50 30.10

‘

q Cutting capacity in mm for soft wire ‘

6604

w Cutting capacity in mm for medium hard wire

Mini-electronics side cutter Z M

DIN ISO 9654, light, slim pattern, especially suitable for use on miniature electronic components, precision cutting edges, mini bevel, suitable for soft and hard wire, Cu-wire of 0.2 mm O can be cut at the tips, welded on double leaf spring, alloy steel of highest quality, induction hardened cutting edges, approx. 63 HRC. ‘

Code

L mm Head

e h b mm mm mm q w e

Handles

‘

66 04 6 110 112 polished

dip-coated with sure-grip surface, ESD applications

R g

€

1 0.8 0.6 0.4 47 20.60

‘

q Cutting capacity in mm for soft wire e Cutting capacity in mm for hard wire ‘

6613

w Cutting capacity in mm for medium hard wire r Cutting capacity in mm for piano wire

Electronics oblique cutter Z M

DIN ISO 9654, tapered head for use in confined spaces, precision cutting edges for hard and soft wire, head angled by 55°, Cu-wire 0.25 mm O may be cut at the tips, welded on double leaf spring, alloy steel of highest quality, induction hardened mini-bevelled cutting edges, approx. 62 HRC. ‘

Code

L mm Head

66 13 6 115 112 polished

e h b1 b2 mm mm mm mm q w e

dip-coated with sure-grip surface, ESD applications

11 11 7.5 10.5 1 0.8 0.6 0.4 54 24.90

‘

q Cutting capacity in mm for soft wire e Cutting capacity in mm for hard wire ‘

236

R g

Handles

‘

w Cutting capacity in mm for medium hard wire r Cutting capacity in mm for piano wire

€

6614

Electronics oblique cutter Z L

DIN ISO 9654, as No 6613, but without bevelled cutting edges, for flush cutting of soft and medium hard Cu- and diode wires.

‘

Code

L mm Head

Handles

e h b1 b2 mm mm mm mm q

R g

dip-coated with sure-grip surface, ESD applications

11 11 7.5 10.5 1

0.6

55 24.90

L2 L3 h b mm mm mm mm q

R g

‘

66 14 6 115 112 polished

€

‘

q Cutting capacity in mm for soft wire ‘

6615

w Cutting capacity in mm for medium hard wire

Electronics oblique cutter Z M

DIN ISO 9654, slim, extended head for delicate cuts in confined spaces, box joint for precise movement, precision cutting edges with mini bevel for Cu- and diode wires, head angled by 30°, welded on double leaf spring, alloy steel of highest quality. ‘

Code

L mm Head

Handles

‘

66 15 6 115 112 polished

dip-coated with sure-grip surface, ESD applications

6 0.6 0.3

€

47 32.00

‘

q Cutting capacity in mm for soft wire ‘

6619

w Cutting capacity in mm for medium hard wire

Electronics top cutter Z M

DIN ISO 9654, slim long head for use in confined space, box joint for precise movement, precision cutting edges for Cu- and diode wires, mini-bevel, welded on double leaf spring, alloy steel of highest quality. ‘

Code

L mm Head

e W h b1 b2 mm mm mm mm mm q

Handles

‘

66 19 6 115 112 polished

dip-coated with sure-grip surface, ESD applications

15.5 8.5 5.5

R g

€

5 0.6 0.3 65 29.00

‘

q Cutting capacity in mm for soft wire ‘

6620

w Cutting capacity in mm for medium hard wire

Electronics top cutter Z M

DIN ISO 9654, precision cutting edges for soft and hard wires, mini-bevel, head angled 90°, pointed head, Cu-wire 0.25 mm O may be cut at the tips, welded on double leaf spring, alloy steel of highest quality, induction hardened cutting edges, approx. 60 HRC.

‘

Code

L mm Head

Handles

e h b1 b2 mm mm mm mm q w e

dip-coated with sure-grip surface, ESD applications

6.5 11 7.5 11

‘

66 20 6 115 112 polished

R g

€

1 0.8 0.6 0.4 82 25.40

‘

q Cutting capacity in mm for soft wire e Cutting capacity in mm for hard wire ‘

6621

w Cutting capacity in mm for medium hard wire r Cutting capacity in mm for piano wire

Electronics top cutter Z L

DIN ISO 9654, as No 6620, but without bevelled cutting edge, for flush cutting of soft and medium hard Cu- and diode wires, alloy steel of highest quality, induction hardened cutting edges, approx. 60 HRC.

‘

Code

L mm Head

Handles

‘

66 21 6 115 112 polished

dip-coated with sure-grip surface, ESD applications

e h b1 b2 mm mm mm mm q

R g

6.5 11 7.5 11

0.6

82 25.40

€

‘

q Cutting capacity in mm for soft wire ‘

w Cutting capacity in mm for medium hard wire

237

Pliers VDE Pliers 6501

Combination pliers

DIN ISO 5746, precision cutting edges for all wires, incl. piano wire, induction hardened cutting edges, approx. 62 HRC, for long life. 65 01 7 160

65 01 8 160

‘

Code

L mm

Head

Handles

chrome plated

dip-coated insulation, DIN EN 60900, T AC/1000 V

‘

65 01 7 160 65 01 7 180 65 01 7 200 65 01 8 160 65 01 8 180 65 01 8 200

160 180 200 160 180 200

chrome plated

1.8 2 2.5 insulated, with plastic sleeves, DIN EN 60900, T AC/1000 V 1.8 2 2.5

R g

€

1.5 1.8 2 1.5 1.8 2

10 12 13 10 12 13

16 16 16 16 16 16

202 279 359 186 186 317

29.00 30.80 34.20 25.00 26.60 28.80

‘

e cutting capacity in mm for hard wire t cutting capacity in mm for cable

r cutting capacity in mm for piano wire z cutting capacity in mm2 for cable

‘

6507

Flat nose pliers, short

DIN ISO 5745, short, flat serrated jaws.

65 07 7 160

65 07 8 160

‘

Code

L mm

L3 W D h b mm mm mm mm mm

Head

Handles

chrome plated chrome plated

dip-coated insulation, DIN EN 60900, T AC/1000 V 30 insulated, with plastic sleeves, DIN EN 60900, T AC/1000 V 30

R g

€

200 181

31.10 27.20

R g

€

148 166

36.80 31.10

‘

65 07 7 160 160 65 07 8 160 160 ‘

6508

17 17

10 10

5 5

9 9

Flat nose pliers, long

DIN ISO 5745, long, flat serrated jaws.

65 08 7 160

65 08 8 160

‘

Code

L mm

L3 W D h b mm mm mm mm mm

Head

Handles

chrome plated chrome plated

dip-coated insulation, DIN EN 60900, T AC/1000 V 50 insulated, with plastic sleeves, DIN EN 60900, T AC/1000 V 50

‘

65 08 7 160 160 65 08 8 160 160 ‘

6523

15 15

8 8

3 3

5 5

Round nose pliers, short

DIN ISO 5745, for bending wire loops and rings, short, round, ground jaws, fine serrations on gripping areas. 65 23 7 160

65 23 8 160

‘

Code

L mm

Head

Handles

L3 W D b mm mm mm mm

R g

€

chrome plated chrome plated

dip-coated insulation, DIN EN 60900, T AC/1000 V insulated, with plastic sleeves, DIN EN 60900, T AC/1000 V

30 30

201 176

27.70 23.80

‘

65 23 7 160 160 65 23 8 160 160 ‘

6524

18 18

10 10

3 3

Round nose pliers, long

DIN ISO 5745, for bending wire loops and rings, long, round, ground jaws, fine serrations on gripping areas. 65 24 7 160

65 24 8 160

‘

Code

L mm

Head

Handles

L3 W D b mm mm mm mm

R g

€

chrome plated chrome plated

dip-coated insulation, DIN EN 60900, T AC/1000 V insulated, with plastic sleeves, DIN EN 60900, T AC/1000 V

47 15.5 8.5 47 15.5 8.5

162 156

29.60 25.30

‘

65 24 7 160 160 65 24 8 160 160 ‘

238

2.5 2.5

6529

Snipe nose pliers with cutter (radio- or telephone pliers)

DIN ISO 5745, Form A (straight), half round, long tapering, serrated jaws, with burner hole, precision cutting edges for soft and hard wires, induction hardened cutting edges, approx. 60 HRC.

65 29 7 160

65 29 8 160

‘

Code

L mm

L3 W D h b mm mm mm mm mm

Head

Handles

chrome plated

dip-coated insulation, DIN EN 60900, T AC/1000 V

R g

€

174 226 158 202

34.80 42.10 28.50 31.30

‘

65 29 7 160 65 29 7 200 65 29 8 160 65 29 8 200

160 200 160 200

51 73 insulated, with plastic sleeves, DIN EN 60900, T AC/1000 V 51 73

chrome plated

16 17 16 17

9 9 9 9

3 3 3 3

2.5 2.5 2.5 2.5

‘

6530

Snipe nose pliers with cutter (radio- or telephone pliers)

DIN ISO 5745, Form B, bent 45°, half round, long tapering, serrated jaws, with burner hole, precision cutting edges for soft and hard wires, induction hardened cutting edges, approx. 60 HRC. 65 30 7 160

65 30 8 160

‘

Code

L mm

L2 L3 W D h b mm mm mm mm mm mm

Head

Handles

chrome plated

dip-coated insulation, DIN EN 60900, T AC/1000 V

R g

€

185 230 154 201

42.70 47.50 33.90 35.40

‘

65 30 7 160 65 30 7 200 65 30 8 160 65 30 8 200

160 200 160 200

24 28 insulated, with plastic sleeves, DIN EN 60900, T AC/1000 V 24 28

chrome plated

55 76 55 76

16 17 16 17

9 9 9 9

3 3.5 3 3.5

2.5 3 2.5 3

‘

6533

Mechanics snipe nose pliers

half round, long tapering, serrated jaws.

65 33 7 160

65 33 8 160

‘

Code

L mm

L3 W D h b mm mm mm mm mm

Head

Handles

chrome plated chrome plated

dip-coated insulation, DIN EN 60900, T AC/1000 V 50 insulated, with plastic sleeves, DIN EN 60900, T AC/1000 V 50

R g

€

147 160

31.40 25.50

‘

65 33 7 160 160 65 33 8 160 160 ‘

6600

15 15

8 8

3 3

2.5 2.5

Side cutters N

DIN ISO 5749, Form B, precision cutting edges for all wires incl. piano wire, high quality alloy steel, bevelled cutting edges induction hardened, approx. 63 HRC. 66 00 7 160

66 00 8 160

‘

Code

L mm Head

e h b mm mm mm q

Handles

‘

66 00 7 145 66 00 7 160 66 00 7 180 66 00 8 145 66 00 8 160 66 00 8 180

140 chrome plated dip-coated insulation, DIN EN 60900, T AC/1000 V 160 180 140 chrome plated insulated, with plastic sleeves, DIN EN 60900, T AC/1000 V 160 180

19 23.5 25.5 19 23.5 25.5

20 20 25 20 20 25

8.2 9 9.5 8.2 9 9.5

3 3 3.8 3 3 3.8

R g

€

2.5 2.8 3 2.5 2.8 3

1.8 2 2.5 1.8 2 2.5

1.6 1.6 2 1.6 1.6 2

155 215 270 149 190 249

27.10 28.50 31.70 23.20 24.70 27.70

‘

q Cutting capacity in mm for soft wire e Cutting capacity in mm for hard wire ‘

w Cutting capacity in mm for medium hard wire r Cutting capacity in mm for piano wire

239

Pliers Heavy duty side cutters N

6602

DIN ISO 5749, Form A, precision cutting edges for all wires incl. piano wire, high quality alloy steel, bevelled cutting edges induction hardened, approx. 63 HRC. 66 02 7 200

66 02 8 200

‘

Code

L mm Head

Handles

‘

66 02 7 160 66 02 7 200 66 02 7 250 66 02 8 160 66 02 8 180 66 02 8 200

160 chrome plated dip-coated insulation, DIN EN 60900, T AC/1000 V 200 250 160 chrome plated insulated, with plastic sleeves, DIN EN 60900, T AC/1000 V 180 200

e h b mm mm mm q

R g

€

25.5 31 32 25.5 27.5 31

3.4 4 4 3.4 3.8 4

2.5 3 3.5 2.5 2.7 3

2 2.5 3 2 2.2 2.5

220 325 475 210 250 305

36.90 45.80 50.50 31.00 38.50 40.20

25 28 29.5 25 26.5 28

9.5 11.5 12 9.5 10.5 11.5

4 4 4 4 4 4

‘

q Cutting capacity in mm for soft wire e Cutting capacity in mm for hard wire

w Cutting capacity in mm for medium hard wire r Cutting capacity in mm for piano wire

‘

6622

Wire stripping pliers

with adjustment screw to cut insulation only on wire or cable, max. 5 mm O 10 mm2 conductor cross-section. 66 22 7 160

66 22 8 160

‘

Code

L mm

Head

Handles

R g

€

chrome plated chrome plated

dip-coated insulation, DIN EN 60900, T AC/1000 V insulated, with plastic sleeves, DIN EN 60900, T AC/1000 V

180 168

42.60 36.90

‘

66 22 7 160 160 66 22 8 160 160 ‘

6623

Wire stripping pliers

for wires from 0.5 to 5 mm O, self adjusting, cutter hole for cutting wire or stranded wires up to 5 mm O, special steel. 66 23 7 160

66 23 8 160

‘

Code

L mm

Head

Handles

R g

€

chrome plated chrome plated

dip-coated insulation, DIN EN 60900, T AC/1000 V insulated, with plastic sleeves, DIN EN 60900 T AC/1000 V

214 184

54.50 49.50

R g

€

15.50

‘

66 23 7 160 160 66 23 8 160 160 ‘

Replacement stripping knives (1 pair) for No 6623 ‘

Code ‘

69 23 0 001 ‘

6630

Cable shear

for copper and light alloy cables. Easy, single handed operation. Special cutter geometry to avoid pressure marks and frayed ends, adjustable joint, anti-squeeze protection, not suitable for steel or armoured cables.

‘

Code

L mm

Head

Handles

R g

€

chrome plated

dip-coated insulation, DIN EN 60900, T AC/1000 V

380

69.00

‘

66 30 7 220 220 ‘

u cutting capacity in mm2 for single wire Al-/Cu-Cable o cutting capacity in mm2 for thin wire Al-/Cu-Cable ‘

240

i cutting capacity in mm2 for multiple wire Al-/Cu-Cable

6673

Plastic side-cutters 6670

Plastic side-cutters L

for plastic injection mouldings, with raised cutting edges, 20° angled, with no bevel to enable flush trimming of sprues and burrs, with spring-loaded opening, induction-hardened cutting edges.

Plastic side-cutter L

for plastic injection mouldings, with particularly narrow, straight cutting edges, with no bevel to enable flush trimming of sprues and burrs, only for thin sprues made of soft thermoplastic, with spring-loaded opening, induction-hardened cutting edges.

‘

Code

L mm Head

Handles

e h b R mm mm mm g

€

‘

66 73 6 130 130 polished dip-coated with 22 17 8.5 107 19.70 66 73 6 145 145 sure-grip surface 23 18 9.5 119 21.00 66 73 6 160 160 28 18 10.5 165 21.60

‘

Code

L mm Head

Handles

e h b R mm mm mm g

‘

66 70 6 120 120 polished dip-coated with 13 11 sure-grip surface

‘

€

6671

6674

56 22.10

Plastic side-cutter L

for plastic injection mouldings, with convex cutting edge, with no bevel to enable flush trimming of sprues and burrs, with spring-loaded opening, induction-hardened cutting edges.

‘

Plastic side-cutter L

for plastic injection mouldings, with particularly narrow, straight cutting edges, 45° angled, with no bevel to enable flush trimming of sprues and burrs, only for thin sprues made of soft thermoplastic, with spring-loaded opening, induction-hardened cutting edges. ‘

Code

L mm Head

Handles

e h b R mm mm mm g

€

‘

66 74 6 160 160 polished dip-coated with 28 20 11 162 21.60 sure-grip surface ‘

‘

Code

L mm Head

Handles

e h b R mm mm mm g

‘

66 71 6 120 120 polished dip-coated with 12 11 sure-grip surface

€

56 22.10

‘

6672

6676

Plastic side-cutters L

For plastic injection mouldings, with straight cutting edges, 30° angled, with no bevel to enable flush trimming of sprues and burrs, with springloaded opening, induction-hardened cutting edges.

Plastic side-cutters L

for plastic injection mouldings, with straight cutting edges, 20° angled, with no bevel to enable flush trimming of sprues and burrs, with spring-loaded opening, induction-hardened cutting edges. ‘

Code

L mm Head

Handles

e h b R mm mm mm g

‘

€

66 76 6 130 130 polished dip-coated with 19 16.5 8.5 105 21.50 66 76 6 145 145 sure-grip surface 21 18.5 9.5 125 22.90 66 76 6 160 160 28 20 11 182 23.30 ‘ ‘

Code ‘

L mm Head

Handles

e h b R mm mm mm g

€

66 72 6 130 130 polished dip-coated with 22 16 9 107 20.40 66 72 6 145 145 sure-grip surface 25 17 10 120 20.80 66 72 6 160 160 28 18 10 161 21.10 ‘

6677

Plastic side-cutter L

for plastic injection mouldings, with straight cutting edges, 90° angled, with no bevel to enable flush trimming of sprues and burrs, with spring-loaded opening, induction-hardened cutting edges.

‘

Code ‘

L mm Head

Handles

e h b R mm mm mm g

€

66 77 6 160 160 polished dip-coated with 25 21 10 166 22.60 sure-grip surface ‘

241

Certified to DIN EN ISO 9001

After STAHLWILLE was certified, as one of the very first companies back in 1990, to DIN EN ISO 9002, our Quality Assurance System was also certified to DIN EN ISO 9001 in 1992.

Pipe cutters, Hammers, Chisels, Files, Miscellaneous tools

Original STAHLWILLE pipe and tube tools These extremely robust pipe cutters guarantee accurate cutting without the danger of the cut running off at an angle. Pipes can be directly passed on to the next processing stage.

Individual components 1

Pin for wheels and rolls

Guide rolls for pipe cutters

4 3

1 2

Cutting wheels for steel, non-ferrous metal and plastic pipes

Additional rings for versions with three cutting wheels

EXPRESS Pipe Cutter No 150 Ideal for pipes made of steel, copper, brass, light alloy and hard plastics. This tool is available in four sizes to cover outer diameters from 6 to 90 mm. Essential product advantages when cutting pipes with STAHLWILLE pipe cutters: Straight-line cutting STAHLWILLE EXPRESS pipe cutters ensure a perfectly perpendicular cut. The broad support rolls ensure that the cutting wheels are accurately guided throughout the cut. In this way, the cut cannot run off at an angle on the pipe surface or enter the pipe at a tilted angle. The robust drop forged upper-jaw section with its reinforced cutter-wheel guides prevents spiral cuts.

METAL Pipe Cutter No 153 This light-weight, extremely convenient tool is specially suitable for cutting tubes made of copper, brass, light alloy or hard plastics and for thin-walled steel tubes with outer diameters of from 3 to 35 mm and maximum cutting depths of 2.5 mm. The integrated internal three-bladed cutter in the handle removes burrs.

Deburring and chamfering The wide guide rolls flatten the burr created during the cutting process back into the material. Separate deburring is not required. The cut-to-length pipe is automatically chamfered and can be passed directly to the next processing step. The cut edge is angled in accordance with the cutting wheel geometry. Universally applicable â&#x20AC;&#x201C; Work on pipes in situ STAHLWILLE EXPRESS pipe cutters can also be equipped with three cutting wheels. This enables extremely efficient work on pipes in situ involving only a small angle of movement.

244

Midget tube cutter No 155 For pipes and tubes made of copper, brass, light alloy, hard plastics and for thin-walled steel tubes with outer diameters of from 3 to 16 mm where the maximum cutting depth is 2.0 mm â&#x20AC;&#x201C; we recommend this extremely compact and accurate tube cutter.

STAHLWILLE cutting wheels for steel pipes Especially high-grade, wear-resistant steel enables extraordinarily high cutting force. The cutting wheels are made of very tough special steel which guarantees long service lifetimes.

STAHLWILLE flaring tools – simple to use and guaranteed optimum results.

Chain Pipe Cutter No 157

STAHLWILLE Double Flaring Tools No 165N

Special pipe cutter, infinitely variable, with rotating handle, also for cutting stainless steel pipes with wall thicknesses of up to 1.8 mm and outer diameters of from 25 to 75 mm. Chain lengths up to 270 mm.

Double Flaring Tools are used for making permanent connections between pressurised pipes. DIN standard double flares in accordance with DIN 74234 can be made with this convenient easy-to-use and tough tool made by STAHLWILLE to create safe connections (e.g. in car brake leads) without the need for special skills. Simply clamp the tool in the vice – and it is ready for use. This tool guarantees rapid, safe processing of seamless drawn and double-walled rolled pipes (Bundy®) with wall thicknesses of 0.7 or 1.0 mm with a single flaring bit. Included in the set: six flaring bits and two clamping blocks (also available separately)

Plastic pipe shears No 158 Low force needed thanks to optimised force transmission. High cutting force thanks to Teflon coated blade Cutter body made of die-cast magnesium. Light but robust.

Single flaring cone D

Double flaring cone E

Double flaring cone F

Double flaring cone F 180°

Various DIN standard single and double flares – easily and quickly produced using the STAHLWILLE double flaring tool.

245

Pipe cutters, Miscellaneous tools 150

EXPRESS pipe cutters

157

with one cutting wheel and two guide rollers; for steel, copper, brass, aluminium and hard plastic tubes.

Chain pipe cutter

infinitely adjustable, with twist handle, also suitable for special steel pipes up to 1.8 mm wall thickness, chain length 270 mm.

‘

Code

F ''

size

F mm

G Cutting depth R mm max. mm g S

‘

60 02 00 01 60 07 00 02 60 02 00 03 60 12 00 01 60 12 00 02 1

1 1) 2 1) 3* 1/3 2) 2/3 2)

1/8–1 1/4 1/8–2 3/4–3 1/8–1 1/4 1/8–2

3–32 3–50 20–80 3–32 3–50

6–43 10–63 26–90 6–43 10–63

4.5 7 9 4.5 7

1220 2191 3153 1140 2004

1 1 1 1 1

‘

€ 110.00 109.00 214.00 124.00 124.00

G mm

Cutting depth max. mm

R g

25–75

705

R g

183

Code ‘

60 11 00 01

€ 116.00

‘

K157

Chain

‘ ‘

) with wide guide rollers ) with three cutting wheels * to be discontinued

Code ‘

69 13 00 01

‘

€ 85.50

‘

153

METAL pipe cutter

Guide rollers

for use on copper, brass, light alloy, PVC and thin walled steel tubes, with deburring tool (3 cutting edges) inside handle, forged, chrome plated.

for pipe cutters.

‘

for pipe cutter

‘

Code

G ''

G mm

Cutting depth max. mm

R g

1/8–1 3/8

3–35

2.5

356

‘

60 01 00 00

€ 65.00

‘

155

Small bore pipe cutter

Code

O mm

b mm

R g

23 28 33 12

21.5 62 27.5 117 19 230 12 10

‘

69 02 01 07 69 07 02 02 69 02 03 02 69 01 00 02

RL 1500/1 150/1 RL 1500/2 150–151/2 RL 150/3/4 150–151/3 + 4 RL 153 153

2 5 5 5

€ 8.20 8.95 10.30 5.95

‘

for use on copper, brass, light alloy, PVC and thin walled steel tubes.

Spindles for wheels and guide rollers. ‘

wheelbolt

‘

Code

G ''

G mm

Cutting depth max. mm

R g

1/8–5/8

3–16

102

‘

60 07 00 01

€ 23.80

‘

SR150

Cutting wheels

Code 69 02 01 04 69 02 01 03 69 07 02 03 69 07 02 04 69 02 03 03 69 02 03 04 69 01 00 03 69 01 00 04 1

for steel pipes.

roller- for pipe bolt cutter

‘

BL 150/1 BZ 1500/1 BZ 1500/2 BL 1500/2 BZ 150/3/4 BL 150/4N BZ 153 BL 153

x 1)

150/1 150/1 150–151/2 150–151/2 150–151/3 + 4 150/4 153 153

x 2) x x x x 3)

x x

L O R mm mm g S 29 38.5 46 38 36 40 18.5 13

7.5 7.5 9 9 9 9 4 4.75

20 14 23 19 34 21 2 2

1 10 10 10 10 1 10 10

€ 3.60 3.60 3.60 3.60 3.60 3.40 3.60 3.60

‘

Code

size

for pipe cutter

O mm

b mm

R g

€

1 2 3/4

150/1 150/2 150/3 + 4

25 32 41

14 19 19

14 28 38

10 10 10

10.20 9.95 17.60

‘

69 02 01 01 69 02 02 01 69 02 03 01

BL = wheel bolt BZ = roller bolt 1 ) wheel- and roller bolt for 150/1 until 1985, wheel bolt for 150/1 from 1986 2 ) roller bolt for 150/1 from 1986 3 ) wheel bolt for 150/4 from 2009 ‘

RI 1500

‘

SR153

Spacing washers

When required to fit pipe cutters No 150/1, 150/2 or No 150/4 with 3 cutting wheels (to work in confined spaces), a total of 4 spacing washers is required. Simply exchange the 2 guide rollers for 2 cutting wheels No SR150 with 2 spacing washers to each.

Cutting wheels

‘

Code

for pipe cutter

O mm

b mm

R g

‘

€

Code

size

for pipe cutter

O mm

b mm

R g

1 2 4

150/1 14 150/2, 151/2 16 150/4 *) 18

3.9 4.45 9.5

8 8 18

6 6 1

‘

69 01 00 01

153

9.50

‘

SR155

Cutting wheels

‘

*) For 150/4 from 2009

‘

Code

for pipe cutter

O mm

b mm

R g

€

155

5.90

‘

69 11 00 01 ‘

246

68 02 01 01 68 02 02 01 68 02 03 01 ‘

€ 2.55 2.70 2.45

158

Plastic pipe shears

1650N

Clamping blocks

for plastic pipes made of PE, PP, PB, PE-X, MLP/MSR, VPE, CPVC, PVC, PVDF and for dip-coated aluminium tubes. • low force needed thanks to optimised force transmission • high cutting force thanks to Teflon coated blade • rapid blade changing without tools • size 42 with ratchet function and single-handed rapid blade retraction • Cutter body made of die-cast magnesium. Light but robust.

1 pair

‘

R g S

68 03 10 01

4.75; 5; 6; 8; 9; 10 mm; 3/16; 1/4; 5/16; 3/8''

198

Code

€

‘

Code

O mm

O ''

L mm

R g

26 35 42

1 1 3/8 1 5/8

205 225 245

235 276 441

1 1 1

‘

60 12 00 26 60 12 00 35 60 12 00 42

€

78.50

‘

34.70 45.60 60.00

1650K

Clamping blocks

‘

1 pair, for dip-coated brake leads.

KL158

Spare blades

U ‘

Code

for No

R g

158-26 158-35 158-42

43 60 83

1 1 1

‘

69 12 00 26 69 12 00 35 69 12 00 42

‘

€ 13.10 20.50 24.30

R g

‘

68 03 00 03

5; 6 mm

100

Code

€ 66.50

‘

1651

Double flaring tool D 45° side of Clamping blocks to face spindle. Replace Flaring cone with Thrust piece.

This simple-to-use STAHLWILLE Double Flaring tool will form accurate flares (to DIN 74234) on seamless drawnand double walled (BUNDY®) tubing. ‘

Clamped in a vice, the tool is instantly ready for use. Flaring and Pressure Cones are quickly changed.

45° side of Clamping blocks to face spindle. Pre-form with Flaring cone, finish with Forming cone.

The robust construction

Tubing is held horizontally by 25 mm wide Clamping blocks.

45° side of Clamping blocks to face spindle. Form with Flaring cone.

Flaring cones

Code

size

G mm

R g

6+8 mm+1/4+5/16'' 9+10 mm+3/8''

8 10

56 56

1 1

‘

68 04 07 08 68 04 09 10 ‘

of the tool, plus the shape of Flaring cones, enables single cone flaring on tubes of 0.7 or 1.0 mm wall thickness.

1652N

Thrust piece/flaring cone

This is important when endless tubing is used. A distance pin controls length of tube required for flaring.

45°; 4.75/5 mm+3/16'', for Double flaring tool No 165N. ‘

Code

F180°

G mm

R g

4.75/5mm + 3/16''

‘

By using the 90° sides of Clamping block, Flare "F" receives a flat collar.

68 05 10 01

€ 21.60

‘

1655N 165N

€ 21.60 21.60

Flaring spindle

Double flaring tool

for Double flaring tool No 165N. ‘

with 1 pair of Clamping blocks No 1650N, 2 Flaring cones No 1651 and 1 Thrust piece/flaring cone No 1652N.

Code

R g

102

‘

69 10 10 02

€ 26.60

‘

1656N

Clamping screw

for Double flaring tool No 165N. ‘

‘

R g S

‘

63 03 10 00

4.75; 5; 6; 8; 9; 10 mm; 3/16; 1/4; 5/16; 3/8'' 1420 1

Code ‘

€ 411.00

Code ‘

69 10 10 03

€ 17.40

‘

247

Pipe cutters, Miscellaneous tools 10940

Rubber composition hammers

10956R

Spare nylon heads

these are lightly heated and then tapped into position.

DIN 5128, with two plane faces.

‘

Code

O mm

R g

€

27 32 35 40 50 60

10 17 23 28 52 83

10 10 10 10 10 10

2.15 3.10 3.90 4.75 8.55 11.40

‘

Code

O mm

L1 mm

L2 mm

R g

55 65 75 90

320 350 350 380

90 115 130 140

317 527 780 1190

2 2 2 2

‘

70 14 00 01 70 14 00 02 70 14 00 03 70 14 00 04

€ 5.35 6.95 10.70 16.00

79 05 00 27 79 05 00 32 79 05 00 35 79 05 00 40 79 05 00 50 79 05 00 60 1

‘

10957

Plastic hammers

‘

10955

the hollow head is partially filled with steel shot which adds to the weight, prevents recoil; with interchangeable heads made of medium-hard polyurethane and with a hickory handle.

Plastic hammers

with interchangeable heads of impact resisting cellulose acetate and ash handles.

‘

Code ‘

O mm

L1 mm

L2 mm

R g

25 30 35 40 50 60

320 350 355 375 385 420

108 115 118 125 135 165

320 460 580 760 1250 1900

6 6 6 2 2 2

‘

Code

O mm

L1 mm

L2 mm

R g

27 32 35 40 50

265 280 290 320 340

90 100 105 110 115

215 325 400 550 860

6 6 2 2 2

‘

70 16 00 27 70 16 00 32 70 16 00 35 70 16 00 40 70 16 00 50 1

€ 9.20 12.10 14.60 17.40 26.60

70 19 00 25 70 19 00 30 70 19 00 35 70 19 00 40 70 19 00 50 70 19 00 60 1

€ 37.50 40.80 44.90 52.50 65.50 125.00

‘

10957R 10955R

Spare plastic heads

Code

of impact resisting cellulose acetate, these are lightly heated and then tapped into position. O mm

R g

27 32 35 40 50

13 21 28 37 65

5 10 10 10 10

‘

79 04 00 27 79 04 00 32 79 04 00 35 79 04 00 40 79 04 00 50 1

€ 1.15 1.70 2.25 2.60 4.60

‘

10956

O mm

R g

€

25 30 35 40 50 60

14 19 26 38 72 118

10 10 10 10 10 10

5.55 7.25 8.90 10.90 15.60 25.60

‘

Code

Spare plastic heads

‘

79 09 00 25 79 09 00 30 79 09 00 35 79 09 00 40 79 09 00 50 79 09 00 60 1

‘

10958

Embossing hammer

aluminium, cylindrical, with hickory handle.

Nylon hammers

with interchangeable heads of shockproof nylon vestamid and hickory handles.

‘

Code

O mm

L1 mm

L2 mm

R g

340

155

648

‘

€

‘

Code

L1 mm

L2 mm

R g

27 32 35 40 50 60

265 280 290 320 340 380

90 100 105 110 115 135

232 336 413 546 898 1339

6 6 2 2 2 2

‘

70 17 10 27 70 17 10 32 70 17 10 35 70 17 10 40 70 17 10 50 70 17 10 60 1

70 24 00 40

O mm

€ 15.00 19.50 22.70 27.80 42.20 56.50

32.70

‘

10960

Engineers hammers

with ash handles, DIN 1041.

‘

Code

L1 mm

L2 mm

R g

260 280 300 320 350 360 380 400

82 95 105 118 130 135 145 155

148 254 396 614 951 1132 1615 2285

6 6 6 6 2 2 2 2

‘

70 11 00 05 100 70 11 00 01 200 70 11 00 04 300 70 11 00 02 500 70 11 00 06 800 70 11 00 03 1000 70 11 00 07 1500 70 11 00 08 2000 1

‘

248

€ 11.70 12.60 15.10 16.10 24.50 26.10 33.70 44.50

10970

Engineers hammers

101*

with ash handles.

Ribbed cross-cut chisel

of tough tempered special steel, chrome plated. ‘

size

L mm

b mm

R g

150

143

‘

Code

lb.

Code

L1 mm

L2 mm

R g

270 290 310 320 350 380

67 82 93 99 118 126

176 320 454 575 790 1044

6 6 6 6 2 2

‘

€

‘

70 03 00 06

€ 10.70

‘

70 12 00 01 70 12 00 05 70 12 00 06 70 12 00 02 70 12 00 04 70 12 00 03 1

1/4 1/2 3/4

1 1 1/2 2

16.10 18.50 19.80 20.70 27.80 31.70

‘

ES 10956/10960/2

* to be discontinued ‘

102

Cold chisels

DIN 6453, chrome vanadium steel, lacquered silver. ‘

Code

size

L mm

b mm

R g

125 150 175 200 250 300

15 18 21 24 25 26

96 172 269 379 479 591

10 10 10 5 5 5

‘

70 02 00 02 70 02 00 03 70 02 00 04 70 02 00 05 70 02 00 07 70 02 00 08 1

175 x 350 x 45 mm, 2 pieces ‘

€ 8.15 9.90 12.90 14.80 20.00 24.90

‘

R g

Code ‘

96 83 81 25

1130

€ 46.95

‘

No 10956

O 35 mm

No 10960

500 g

‘

103

Cross-cut chisels

DIN 6451, flat, chrome vanadium steel, lacquered silver. ‘

‘

83 81 20 25

Empty tray

114

8.15

‘

Code 70 04 00 03 70 04 00 04 70 04 00 05

ES 10956/10970/2

size

L mm

b mm

R g

150 175 200

16 17 18

147 239 340

10 10 5

‘

€ 10.20 12.90 16.10

‘

110

Grooving chisel

flat, chrome vanadium steel, lacquered silver. ‘

175 x 350 x 45 mm, 2 pieces ‘

R g

Code ‘

96 83 81 31

1075

Code

L mm

b mm

R g

240

292

‘

€

70 08 00 01

€ 14.40

‘

51.55

‘

112 No 10956

O 35 mm

No 10970

1 lb.

‘

Grooving chisel

as No 110, but with finger protector.

‘

83 81 20 25

Empty tray

114

8.15

‘

100

Ribbed cold chisels ‘

of tough tempered special steel, chrome plated.

Code

L mm

b mm

R g

240

411

‘

70 08 00 02 size

L mm

b mm

R g

5* 6 8 10 12

125 150 200 250 300

18 20 26 30 35

93 165 305 507 807

10 10 5 5 5

‘

70 01 00 05 70 01 00 06 70 01 00 08 70 01 00 10 70 01 00 12 1

17.50

‘

Code

€

€ 8.80 10.30 15.00 19.50 27.70

112/1

for Cold Chisels No 102 and Cross-cut chisels No 103 from 200 mm onward, for Grooving chisel No 110, shaft section 23 x 13 mm. ‘

‘

* to be discontinued

Finger protector

Code

R g

101

‘

€

‘

79 16 00 01

4.75

‘

249

Pipe cutters, Miscellaneous tools 104

Drift pins

ES 102/108/109/4

DIN 6458, octagonal, chrome vanadium, lacquered silver. ‘

Code

size

x mm

w mm

L mm

R g

€

2 3 4 5 6 8

10 10 10 10 10 12

120 120 120 120 120 120

60 60 62 64 66 68

10 10 10 10 10 10

5.65 5.65 5.65 5.90 5.90 5.90

‘

70 06 00 07 70 06 00 10 70 06 00 02 70 06 00 08 70 06 00 03 70 06 00 09 1

120 x 2 120 x 3 120 x 4 120 x 5 120 x 6 120 x 8

175 x 350 x 30 mm, 4 pieces ‘

Code

R g

€

555

45.35

115

8.15

‘

96 83 81 23 ‘

‘

No 102

175 mm

No 108

150 x 6; 175 x 6 mm

No 109

size 6; 100 x 3.4 mm

‘

105

Centre punches

‘

DIN 7250, octagonal, chrome vanadium, lacquered silver.

‘

83 81 20 27 ‘

‘

Code

ES 102/105/108/8

size

w mm

L mm

R g

€

100 x 10 120 x 10 120 x 12

10 10 12

100 120 120

52 63 90

10 10 10

4.70 5.45 5.70

‘

70 05 00 01 70 05 00 05 70 05 00 02

Empty tray

‘

108

Parallel pin punches

175 x 350 x 33 mm, 8 pieces

DIN 6450, octagonal, chrome vanadium, lacquered silver.

‘

Code

R g

€

900

60.35

‘

96 83 81 24

‘

Code

x mm

size

w mm

L mm

R g

‘

70 07 11 52 70 07 00 13 70 07 00 01 70 07 00 02 70 07 00 03 70 07 00 04 70 07 00 05 70 07 00 06 70 07 00 09 70 07 00 10 70 07 00 12 70 07 00 08 70 07 00 11 1

115 x 2 2 125 x 3 3 150 x 2.5 2.5 150 x 3 3 150 x 4 4 150 x 5 5 150 x 6 6 150 x 8 8 175 x 3 3 175 x 4 1) 4 175 x 6 6 200 x 8 8 200 x 10 10

8 8 10 10 10 10 10 10 10 10 10 12 12

115 125 150 150 150 150 150 150 175 175 175 200 200

30 35 65 62 64 67 72 81 57 64 69 141 159

‘

S 10 10 10 10 10 10 10 10 10 10 10 10 10

€ 6.65 5.65 5.55 5.50 5.45 5.50 5.80 5.80 6.15 6.15 10.10 7.40 7.40

‘

) for use on Mercedes-Benz (retaining pins of disc brake pads) x diameter of tip w size of handle, octagon

‘

109

Pin punches

No 102

175 mm

No 105

120 x 12 mm

No 108

150 x 2.5; 150 x 3; 150 x 4; 150 x 5; 150 x 6; 150 x 8 mm

‘

83 81 20 36

Empty tray

114

102-5/6

Sets: Chisels, pins, punches

6 pieces content: 1 each No 106/125 mm No 106/150 mm No 107/125 mm No 104/120 x 2; 120 x 4 mm No 105/120 x 10 mm D = in plastic stand Pc = in plastic wallet

‘

with guide bush.

Code

R g

102-5/6 D 102-5/6 Pc

445 426

1 5

‘

98 81 22 01 98 81 22 02

‘

Code

size

v mm

x mm

L mm

R g

€

1 2 3 4 5 6 7 8*

0.9 1.4 1.8 2.4 2.8 3.4 3.9 5.9

5 5.5 6 7 7 8 9 10

80 82 86 95 97 100 100 103

7 12 12 18 19 25 27 47

10 10 10 10 10 10 10 10

8.90 8.80 8.40 8.40 8.40 8.40 8.40 6.50

‘

70 09 00 01 70 09 00 02 70 09 00 03 70 09 00 04 70 09 00 05 70 09 00 06 70 09 00 07 70 09 00 08 1

8.15

‘

€ 34.00 34.00

‘

104-5/6D

Set: Drift pins, centre punches

6 pieces Content: 1 each No 104/120 x 2; 120 x 3; 120 x 4; 120 x 5; 120 x 6 mm No 105/120 x 10 mm in plastic stand

‘

v diameter of tip x diameter of handle * without guide bush ‘ ‘

Code

R g

417

‘

96 70 06 01 ‘

250

€ 34.45

105-8/6K

Pin punch-/centre punch set

TCS 102–108/10957/10960 MF

x ö

6 pieces in transparent plastic container stand. Content: 1 each No 108/150 x 2.5; 150 x 3; 150 x 4; 150 x 5; 150 x 6 mm; DIN 6450/ Form C No 105/120 x 10 mm; DIN 7250

530 x 350 x 40 mm, 12 pieces ‘

‘

Code

483

€

‘

96 70 07 11

R g

Code

R g

€

96 83 03 55

3343

216.60

‘

33.25

‘

No 102

200 mm

No 103

150 mm

No 105

120 x 10 mm

No 108

150 x 3; 150 x 4; 150 x 5; 150 x 6; 150 x 8 mm

No 10957

O 40 mm

No 10960

500; 800 g

‘

108/6

‘

Sets: Parallel pin punches

‘

6 pieces Content: 1 each No 108/150 x 2.5; 150 x 3; 150 x 4; 150 x 5; 150 x 6; 150 x 8 mm D = in plastic stand Pc = in plastic wallet

‘

No 12718 ‘

‘

Code

R g

108/6 D 108/6 Pc

450 424

1 5

‘

96 70 07 01 96 70 07 02

TCS 102–108/10957/12718/13

€

x ö

33.60 33.60

‘

TCS 102–109/10956/10960/6

ö x

530 x 350 x 40 mm, 13 pieces ‘

R g

Code

€

‘

175 x 350 x 40 mm, 6 pieces

96 83 02 26

3730

222.60

‘

R g

Code ‘

96 83 81 81

1500

€ 94.60

No 102

200 mm

No 103

150 mm

No 105

120 x 10 mm

No 108

150 x 3; 150 x 4; 150 x 5; 150 x 6; 150 x 8; 200 x 8 mm

No 10957

O 40 mm

No 10960

500; 800 g

‘

No 10956 ‘

O 35 mm ‘

No 10960

500 g

No 102

175 mm

No 108

150 x 6; 175 x 6 mm

‘

No 109

size 6; 100 x 3.4 mm

No 12718

‘

TCS 102-108/11

TCS 102–108/10960/10

ö x

x ö

175 x 350 x 33 mm, 11 pieces

175 x 350 x 40 mm, 10 pieces

‘

R g

Code ‘

‘

€

R g

Code

€

‘

96 83 87 54

1665

108.05

‘

96 83 03 61

1569

102.25

‘

No 102

150; 200; 250 mm

No 105

120 x 10; 120 x 12 mm

No 108

150 x 2.5; 150 x 3; 150 x 4; 150 x 5; 150 x 6; 150 x 8 mm

‘

No 102

200 mm

No 105

120 x 12 mm

No 108

115 x 2; 150 x 3; 150 x 4; 150 x 5; 150 x 6; 175 x 4; 200 x 8 mm

No 10960

500 g

‘

‘ ‘

‘

251

Pipe cutters, Miscellaneous tools TCS 102–108/10957/10960/13

TCS 102–108/10956/10960/18

ö x

ö x 530 x 350 x 55 mm, 18 pieces

530 x 350 x 60 mm, 13 pieces

‘

R g

‘

R g

Code

€

‘

249.75

‘

96 83 01 77

5540

Code 96 83 06 20

3653

€ 249.15

‘

No 102

200; 300 mm

No 103

175 mm

‘

No 105

120 x 12 mm

‘

No 108

No 102

150 mm

No 103

150 mm

No 105

120 x 10 mm

No 108

150 x 2.5; 150 x 3; 150 x 4; 150 x 5; 150 x 6; 150 x 8 mm

No 10956

O 50 mm

No 10960

300; 500 g

‘

150 x 3; 150 x 4; 150 x 5; 150 x 6; 150 x 8 mm

‘

No 10957

O 50 mm

No 10960

500; 800; 1000 g

‘

No 10356 ‘

TCS 102–108/10957/10960/16

ö x

No 10670

285 mm

No 10672

20 x 315 mm

‘

No 12374 ‘

No 12900N ‘

No 12965 ‘

530 x 350 x 45 mm, 16 pieces

10670

‘

R g

Code

€

‘

96 83 06 09

3715

Three square engineers scrapers

special steel.

265.85

‘ ‘

No 102

200 mm

No 103

150 mm

‘

No 105

120 x 10 mm

No 108

150 x 3; 150 x 4; 150 x 5; 150 x 6; 150 x 8 mm

‘

Code

L mm

R g

215 265 285 310

106 124 140 152

5 5 5 5

‘

72 06 01 01 72 06 01 03 72 06 01 04 72 06 01 05

€ 9.85 10.40 11.10 11.90

‘

No 10957 ‘

No 10960

O 40 mm 500 g

10672

Flat engineers scrapers

special steel.

‘

No 12373

‘

No 12600

500 g

‘

No 12718

72 05 01 04 72 05 01 05

‘

No 12931

Code

R g

20 x 315 25 x 365

227 367

5 5

‘

€ 12.20 14.70

‘

10676

No 65 64 2 250 ‘

No 39 cars

400 mm

Three square engineers bearing scraper

‘

special steel. ‘

Code

R g

85 x 12 x 315

160

‘

72 08 01 03 ‘

252

€ 11.80

12025

Engineers file, round

12053

Hacksaw frame

DIN 8349, cut 2 ‘

Code

L mm

R g

210

118

‘

72 12 01 00

€ 12.70

‘ ‘

12030

Code

Engineers file, half round

L mm

R g

252

159

‘

72 21 00 02

DIN 8349, cut 2

€ 11.30

‘

Spare hacksaw blades for No 12053

‘

Code

L mm

R g

260

317

‘

72 13 01 00

€

6 pieces, Chrome Alloy Tool Steel, 32 teeth per inch.

23.20

‘ ‘

12035

Code

Engineers file, three-square

L mm

R g

158

‘

79 18 00 02

DIN 8349, cut 2

€ 3.10

‘

ES 10670–13110/11

‘

Code

L mm

R g

210

201

‘

72 14 01 00

€ 16.70

‘

12036

Engineers file, hand

DIN 8349, cut 2 530 x 350 x 35 mm, 11 pieces

‘

Code

L mm

R g

260

339

‘

72 17 01 02

‘

€ 17.00

‘

R g

Code ‘

96 83 81 73

€

2120

159.95

301

22.30

‘

12200

Hand vice

No 10670

265 mm

No 12025

210 mm

No 12030

260 mm

No 12035

210 mm

No 12036

260 mm

No 12050

465 mm

‘

forged C 35, width of jaws 48 mm.

‘

Code

L mm

R g

145

673

‘

71 20 00 00

‘

€ 35.40

‘

No 12320 ‘

No 12321 ‘

No 12377

12050

‘

Tubular hacksaw

adjustable, with blade size 300 mm/12''.

No 12931

No 13110

300 mm

‘

83 81 20 88

Empty tray

‘

Code

L mm

R g

465

490

‘

72 21 00 00

€

20.30

‘

Spare hacksaw blades for No 12050 10 pieces, H.S. Steel, 24 teeth per inch. ‘

Code

L mm

R g

300

174

‘

79 18 00 01

€ 27.70

‘

253

Pipe cutters, Miscellaneous tools TCS 12025–13110/11

12000

x ö

Universal thread restorers

suitable for inside and outside threads. ‘

Code

size

L mm

R g

€

ISO SAE WW

230 230 230

119 118 122

10 10 10

45.70 46.90 46.90

‘

72 10 00 04 72 10 00 03 72 10 00 02

530 x 350 x 35 mm, 11 pieces ‘

‘

R g

Code

€

‘

96 83 87 59

2070

185.25

‘

|–––– ISO ––––| Pitch metr. mm thread

|–––– Ww ––––| SAE/USS threads Whitworth threads per inch thread per inch '

No 12025

210 mm

No 12030

260 mm

No 12035

210 mm

No 12036

260 mm

No 12050

300 mm

0.80 1.00 1.25 1.50 1.75 2.00 2.50 3.00

‘

No 12320

5 6+7 8+9 10 + 11 12 14 + 16 18, 20, 22 24 + 27

3/16

24 20 18 16 14 12 11 10

+ 7/32

24 20 18 16 14 13 12 11

1/4 5/16 3/8 7/16 1/2

+ 9/16 + 11/16 3/4 + 13/16 5/8

‘

No 12321

12665

‘

No 12718 ‘

No 12931

Screw pitch gauge

0.25 to 6 mm and 4 to 62 t.p.i. (metric/Whitworth threads).

‘

No 12965 ‘

No 13110

300 mm

‘

905/25

Stud remover set

‘

3/16''–5/8'',

M 5–M 16, 25 pieces, in green plastic box. Content: 5 HSS twist drills sizes (3.2; 4.8; 6.4; 8; 8.7 mm) 5 Fluted Removal Pins sizes 1–5 for threads M 5–M 16 5 Splined Nuts, sizes 1–5 10 Drill Guides, sizes 1–10

Code

size

R g

€

6.80

‘

77 27 00 03 ‘

900/6Pc

Screw EXTRACTOR set

in green plastic bag.

‘

Code

R g

555

‘

96 71 30 25

€ 117.00

‘

Code

Content

R g

1 each No 900 size 1–6

220

‘

906

96 71 01 01

Spare parts

€ 50.75

‘

Removal pins and splined nuts, in pairs in plastic bags.

900

Screw EXTRACTOR

‘

Code

size

for threads

R g

14 20 33 46 65

1 1 1 1 1

‘

71 31 00 01 71 31 00 02 71 31 00 03 71 31 00 04 71 31 00 05 1

‘

1 2 3 4 5

3/16–1/4'' 1/4–5/16''

M5–M6 M7–M8 M10 3/8'' M12 7/16'' M14–M16 1/2–9/16''

€ 6.80 7.80 9.30 11.00 12.70

‘

Code 71 01 00 01 71 01 00 02 71 01 00 03 71 01 00 04 71 01 00 05 71 01 00 06 1

‘

254

for size bolts

‘

1 2 3 4 5 6

D D L recommend.R mm '' mm Drill g S

M3–M4 1/8–5/32'' 3 M5–M7 3/16–1/4'' 3.4 4.9 M8 5/16'' M10–M12 3/8–7/16'' 7 M14–M16 1/2–9/16'' 9 M18–M22 5/8–3/4'' 12

1/8 9/64 3/16 9/32 23/64 31/64

51 62 70 77 88 98

2 mm 5/64'' 3 mm 7/64'' 5 mm 3/16'' 6.4 mm 1/4'' 8 mm 5/16'' 12 mm 15/32''

3 6 10 20 48 92

10 10 10 5 5 5

€ 6.15 7.60 7.60 9.15 9.55 11.60

904

Stud remover

12935N

• Suitable for all sizes of studs from 6–12 mm. • Also suitable for percussion screwdriver use. • Will cope with rusted or scale-coated screws with a minimum of 3 mm protruding. Chuck: size 36 mm Clamping screw: size 24 mm

Workshop micrometers

DIN 863, chrome plated. • With clamping ring and precision ratchet knob • With insulating plates • Tungsten carbide anvil • Readings 0.01 mm

‘

Code

a ''

R g

3/8

420

‘

71 34 00 00

€ 152.00

‘

Code

size

measuring range mm

Pitch mm

R g

0–25 25–50 50–75 75–100

0.5 0.5 0.5 0.5

297 461 601 809

1 1 1 1

‘

12615

77 41 10 01 77 41 10 02 77 41 10 03 77 41 10 04

Nut splitters

galvanised, for splitting nuts of quality range up to 8.8 (55 tpsi).

1 2 3 4

€ 42.40 52.50 65.00 81.50

‘

13110

Steel rule

‘

Code

size

for nuts mm

R g

1 2

10–18 19–27

193 386

1 1

‘

71 25 00 11 71 25 00 12

€

Metric-Inch scales, length 300 mm.

66.50 68.50

‘

12900N

Vernier calliper

Divisions Divisions R Top Edge '' Lower Edge mm g

Code ‘

as per DIN 862, vernier readings 1/20 mm and 1/128'', stainless steel, c/w plastic pouch.

1/16, 1/32, 1/64

77 46 00 01

0.5; 1

S 5

€ 5.00

‘

12915

Ratchet tap holders

steel, chrome plated.

‘

Code

measuring range mm/''

R g

150/6

185

‘

77 37 10 01

€ 37.50

‘

12900/1N

Vernier calliper

with a large digital display, automatic shut-off, switch for mm/inches, depth gauge, RS232C interface, spare battery, differential measurements by means of 0 reset function, display accuracy 0.01 mm / 0.0005'', in plastic case.

‘

Code

Capacity size mm

DIN 1)

ISO 2)

L mm

1 2

M3–8 M5–12

M1–6 85 M6–12 110

‘

77 39 00 01 77 39 00 02

2.0–5.0 4.6–8

R g S 180 305

1 1

€ 17.80 23.10

‘

) for taps DIN ) for taps ISO

2 ‘

Code

measuring range mm/''

R g

150/6

312

‘

77 37 10 02

‘

€

12800

96.00

Set warding files

‘

12900/2N

6 pieces, in Pc-wallet, DIN 7283, Content: 1 file each, hand, flat, half round, three square, square, round

Brake disc gauge

DIN 862, for measuring the thickness of car and motorcycle brake discs in situ, stainless steel, with locking screw and trailing vernier scale (1/10 mm), in wooden storage box.

‘

Code

L mm

R g

100

111

‘

72 23 00 01

‘

Code

measuring range throat depth mm mm

77 37 10 03

‘

R g

233

‘

€ 109.00

‘

12931

€ 18.40

Tape measure

with tape lock. Metric-Inch scales.

13100

Set of needle files

6 pieces, in plastic wallet, Content: 1 file each, round, half round, three square, square, hand, flat

‘ ‘

Code

L m

R g

€

104

12.80

‘

77 04 00 04

Code

L mm

R g

140

‘

96 72 28 01

€ 56.50

‘

255

Pipe cutters, Miscellaneous tools 12932

Padlock

12322

Tungsten carbide scribing iron

straight type; sturdy shank with tungsten carbide tip. Can be reground. Holder and clip. ‘ ‘

R g

Code ‘

77 21 00 02

S 1

Code

€

‘

13.20

‘

77 10 00 01

L mm

R g

€

140

3.40

‘

12250

12374

Force feed oil can

Wire brush

wood, steel wire dia. 0.35 mm.

metal container, brass pump. Content: 500 ccm

‘

Code

L mm

Rows

R g

€

290

129

2.70

L mm

R g

€

270

140

2.90

L mm

R g

260

‘

77 09 00 00 ‘

12377

Wire brush

with brass coated steel bristles. ‘

Code

R g

270

‘

€ ‘

77 01 00 01

23.40

‘

Code ‘

12251

77 09 00 10

Plastic oil can

‘

Content: 250 ccm

12378

File brush

‘

Code ‘

77 25 00 00

€ 4.35

‘

Code

R g

‘

77 11 00 02

€

13115

Brass wire brush

for use on light alloys.

9.90

‘

12320

Electricians cable knife

‘

with stainless blade.

Code

L mm

Rows

R g

280

134

L mm

b mm

R g

€

212

4.00

‘

77 47 00 01

€ 6.80

‘

12481

‘

Code

Blade mm

R g

€

12.80

‘

77 02 00 00

Scraper

‘

12321

Scribing iron

‘

with knurled centre-section. 1 straight and 1 offset blade; blades gunmetal finished.

Code ‘

77 07 00 00 ‘

‘

Code

L mm

R g

€

250

3.85

‘

77 10 00 00 ‘

256

12600

Magnetic lifters

12921NR

Replacement mirror for 12921N

‘

Loss of adhesion above 80°C.

500-3000 Code

O mm

R g

30 40 50 60

10 15 20 27

1 1 1 1

R g

‘

270

79 40 10 30 79 40 10 40 79 40 10 50 79 40 10 60

€ 9.70 11.00 14.60 15.20

‘

Code

lifting power O g mm

R g

500 460 520 535

25 70 230 297

1 1 1 1

‘

77 26 00 27 270 1) 77 26 00 25 500 77 26 00 60 1800 77 26 02 00 3000

5 8 15 19

12923

L mm

€ 7.85 19.20 28.90 49.80

Light unit

with LEDs, includes batteries, can be used with telescopic mirrors No 12920 and 12921.

‘

) Miniature magnetic lifter with tiny head, very powerful

‘

12910

Adjustable hook spanners

‘

for slotted nuts as per DIN 1810, adjustable.

Code ‘

77 40 00 04

€ 44.10

‘

Code

A mm

R g

1 2 3

20–42 45–90 95–165

90 245 686

5 5 5

‘

44 01 00 01 44 01 00 02 44 01 00 03

13120-1

size

€ 27.30 29.50 52.50

‘

12920N

Telescopic mirror

with light unit No 12923 (LED) and batteries, for inspecting numerous kinds of joints. The concave mirror provides 5-times magnification. With non-twisting, oval-section telescopic rod. ‘

with non-twisting, oval-section telescopic rod.

Code

O mm

L mm

R g

310–750

127

‘

77 48 02 02

€ 77.50

‘ ‘

L mm

R g

65 x 43

310–750

Code ‘

77 40 10 01

33.50

‘

12920NR-1

Replacement mirror for No 12920N

‘

Code

R g

‘

79 40 10 01

13120N

€

€ 14.60

Illuminated (LED) and with batteries (approx. 150 hours of light), for inspecting numerous kinds of joints. The LED light source can be detached and used as a separate penlight. The concave mirror provides 5-times magnification. With non-twisting, oval-section telescopic rod. ‘

‘

12920NR-2

Code

Stainless steel replacement mirror for No 12920N

Telescopic mirror

O mm

L mm

R g

310–750

235

‘

77 48 00 02

€ 89.50

‘

Code

R g

‘

79 40 10 02

13120R

€ 10.10

Replacement concave mirror for No 13120N, No 13120-1

‘

12921N

Code

Telescopic mirrors

R g

‘

79 40 10 55

€ 15.60

‘

12922E

Claw lifter

‘

Code

O mm

L mm

R g

30 40 50 60

265–705 275–715 285–725 295–735

108 112 135 150

1 1 1 1

‘

77 40 10 30 77 40 10 40 77 40 10 50 77 40 10 60 ‘

with ergonomic handle. € 28.50 29.10 32.00 33.50

‘

Code

O mm

L mm

R g

6 8

540 540

113 148

1 1

‘

77 40 11 03 77 40 72 03

€ 35.10 35.50

‘

257

Pipe cutters, Miscellaneous tools 12941N

Soldering gun

12966

Wire stripping knife with hooked blade

230 V, 50–60 Hz, 100 W.

for cutting round the outer cable insulation and longitudinal cuts. • accurate, fast and safe stripping of all popular round cables from 4 - 28 mm O. • no damage to the inner conductors thanks to infinitely variable adjustment of the cutting depth.

‘

Code

R g

839

‘

96 77 42 00

€ 80.55

‘

12941R/4

Code

79 14 00 06

77 62 00 03

€ 13.70

‘

Spare blade for No 12966

‘

R g

‘

12966R

Replacement tip for soldering gun No 12941N R g

Code

‘

€ 8.55

‘

Code

R g

‘

79 25 00 03

€ 3.55

‘

12943N

Soldering iron

13126

230 V, 50–60 Hz.

‘

Code

R g

30 60

224 276

1 1

‘

77 42 00 30 77 42 00 60

€ 50.00 51.50

Torch

ABS body with high-impact polycarbonate lens. Approved by FM, CSA, AUS and MSHA as non flammable. Laser-SPOT™ xenon lamp module generates a finely focussed white collimation light beam with a net intensity up to 400% higher than normal. 12.000 candlepower. Bulb lifetime: 30 hours. With black rubber lens protection. Conforms to US military regulations - Class. I Div. 1 USAR. Takes 3 alkali batteries (C) (not included). Suitable for underwater use. Waterproof up to 100 m.

‘

12943R

Replacement tips for No 12943N

‘

Code

size

R g

30 60

7 31

1 1

‘

79 14 00 30 79 14 00 60

€ 8.20 8.20

‘

12965

Universal cutter

‘

with hole for hanging up and 5 spare blades in handle, blade is adjustable by moving slide, suitable for cutting card, rubber, leather, wood.

Code

L mm

R g

191

160

‘

77 49 00 02

€ 83.50

‘

13127

Torch

‘

Code

L mm

R g

160

178

R g

€

2.25

‘

77 62 00 01

€ 7.80

‘

12965R

Spare blades

Made of high-impact polycarbonate resin developed for space use. Focussed beam; with light deflector. Approved by FM, SA, and CENELEC as non flammable. Bulb lifetime: 20 hours. Suitable for underwater use. Waterproof to 150 m. Consisting of: torch, light deflector for deflecting beam through 90°, takes 2 alkali batteries (AAA) (not included).

5 pieces. ‘

Code ‘

79 25 00 01 ‘

‘

Code

L mm

R g

120

‘

77 49 00 03 ‘

258

€ 35.80

TCS 13126/13127/2

x ö 175 x 350 x 60 mm, 2 pieces ‘

Code

R g

€

475

188.30

‘

96 83 00 14 ‘

No 13126 ‘

No 13127 ‘

Spares for torches ‘

Code

for No

R g

13126 (Spare lens) 13127 (Spare lens) 13126 (Bulb unit) 13127 (Bulb unit)

33 7 25 10

1 1 1 1

L mm

R g

160

L mm

R g

150

L mm

R g

145

‘

79 49 00 02 79 49 00 03 79 49 00 04 79 49 00 05

€ 38.30 10.90 48.50 20.50

‘

13130

Tweezers

straight, blunt, finely milled inside, stainless steel. ‘

Code ‘

77 50 00 01

€ 15.50

‘

13131

Tweezers

bent, blunt, finely milled inside, stainless steel. ‘

Code ‘

77 51 00 01

€ 13.60

‘

13135

Wire cutter

with smooth cutting edges, nickel-plated, plastic covered handles.

‘

Code ‘

75 27 00 01

€ 13.20

‘

259

Certified to DIN EN ISO 9001

After STAHLWILLE was certified, as one of the very first companies back in 1990, to DIN EN ISO 9002, our Quality Assurance System was also certified to DIN EN ISO 9001 in 1992.

Pullers

STAHLWILLE pullers Designed with practical applications in mind, drop forged, precision machined on the latest machine tools, hardened and tempered. STAHLWILLE pullers are conscientiously assembled and tested under load. They are ideal tools for removing gearwheels, ball bearings and pulleys from shafts, axles etc.

Battery terminal puller in use on a car battery

Product benefits at a glance: high flexural strength thanks to struts with accurately calculated profiles and milled, smooth guides. highly load-bearing extractor hooks made of oil-hardened chrome vanadium steel with milled-profile jaws and speciallydesigned grip geometry for use in confined spaces and optimised radii for shafts and axles. smooth running and high force transmission through the nut with its hard-wearing, smooth thread contours. high extraction force with ease is made possible even where there is high friction and counterforces due to the CNC milled precision thread. damage to the thread of the nut is effectively prevented, even if the full length of the thread is used, due to the clearance at the end of the thread. excellent running characteristics of the thread itself thanks to high-grade hardening and tempering and the special coatings on the thrust spindles. to enable stubborn parts to be loosened, it may be necessary to tap the puller with a hammer after it has been tensioned. For this reason, the spindle head is equipped with a rounded impact head. close-tolerance, performance-matched jaw sizes on the spindle head ensure non-slip contact with the drive tool. to prevent damage to the shafts while extraction force is applied, the centre is freely-swivelling.

262

How a two-armed puller works

Numerous pullers are available for different applications: Standard pullers Battery terminal pullers Ball joint separators Internal pullers Counter stays Separating fixtures Wheel hub pullers

1 2

After attaching and locking the puller No 11060/11061 1 , the central threaded spindle 2 is turned to ease the bearing off its mount without causing damage. Separating fixture in use for removing ball bearings

Puller in use for removing gearwheels

Standard pullers Two- or three-armed puller? A three-armed puller is generally preferable to a two-armed one provided there is sufficient space because it distributes the pulling forces more evenly. 263

Pullers 11050

Standard pullers

11051

two-armed, with sliding permanently parallel extractor hooks, zinc plated; for extracting gearwheels, ball bearings, pulleys and similar parts from shafts or axles; for removing ball bearings, bearing outer races and bushes from holes; hooks can be used as internal or external hooks.

Standard pullers

three-armed, with sliding permanently parallel extractor hooks, zinc plated; for extracting gearwheels, ball bearings, pulleys, fan wheels and similar parts from shafts or axles; for removing ball bearings, bearing outer races and bushes from holes; hooks can be used as internal or external hooks.

‘

Code

size

Clamp. width Clamp. depth mm mm

R g

‘

71 13 00 11 71 13 00 12 71 13 00 13 71 13 00 14 71 13 00 15 71 13 00 16 1

1 2 3 4 5 6

25–80 25–130 50–160 60–200 80–250 80–350

100 100 150 150 200 200

1000 1100 2800 3200 6700 8000

‘

S 1 1 1 1 1 1

€ 78.00 83.00 141.00 157.00 261.00 296.00

Code

size

71 08 00 11 71 08 00 12 71 08 00 13 71 08 00 14

1 2 3 4

11054 Arms for pullers No 11050/11051

1 piece ‘

Code

size

for puller No

R g

238

36.30

580 1615

1 1

45.80 77.00

‘

79 13 00 11

79 13 00 12

79 13 00 13

11050-1, -2 11051-1, -2 11050-3, -4 11051-3, -4 11050-5, -6

€

R g

25–80 25–120 25–160 25–200

100 100 150 150

1280 1600 3600 3690

1 1 1 1

R g

5700 8000

1 1

R g

7000

€ 109.00 116.00 199.00 223.00

‘

H 11050

Clamp. width Clamp. depth mm mm

‘

Pullers

three-armed, with swivelling extractor hooks for larger reaches, zinc plated; for extracting gearwheels, ball bearings, pulleys and similar parts from shafts or axles; hooks can be used as internal or external hooks; for internal extraction, simply turn the hooks and spindle round; the efficient leverage effect forces the hooks firmly onto the part to be extracted.

‘

11053

Standard pullers

two-armed, with swivelling extractor hooks for larger reaches, zinc plated; for extracting gearwheels, ball bearings, pulleys and similar parts from shafts or axles; hooks can be used as internal or external hooks; for internal extraction, simply turn the hooks and spindle round; the large leverage effect ensures a firm grip on the part to be extracted, whether internal or external.

‘

Code 71 15 03 11 71 15 03 12

size

Clamp. width Clamp. depth mm mm

11056

R g

4500 5800

1 1

‘

71 15 02 11 71 15 02 12 ‘

1 2

50–300 50–400

270 400

Clamp. width Clamp. depth mm mm

1 2

50–300 50–400

270 400

€ 204.00 251.00

‘

Code

size

‘

€ 156.00 187.00

Set: Pullers

consisting of the most common two- and three-armed pullers with two- and three-armed, sliding, parallel extractor hooks. for extracting gearwheels, ball bearings, pulleys and similar parts from shafts or axles; hooks can be used as internal or external hooks; the efficient leverage effect forces the hooks firmly onto the part to be extracted.

‘

Code

Clamp. width Clamp. depth mm mm

‘

96 71 13 11 ‘

264

120

100/200/250

€ 534.00

12150

Pullers

11040

Battery terminal pullers

two-armed, with a self-centring quick-action clamp and automatic feed, zinc plated; for extracting battery terminal clamps, smaller ball bearings, pulleys etc.; as force is applied through the spindle, the extractor hooks automatically apply increasing force to the part being extracted; particularly suited to car electrics, compressed air system repairs and similar applications due to the compact design and small hooks.

two-armed version with swivelling, double-action extractor hooks, zinc plated; for extracting gearwheels, ball bearings, pulleys and similar parts from shafts or axles; for removing ball bearings, bearing outer races and bushes from holes; for internal extraction, simply swivel the hooks and turn the spindle round or just turn the hooks round.

‘

Code

size

Clamp. width Clamp. depth R mm mm g

‘

71 14 02 11 71 14 02 12

1 2

20–150 40–220

80 130

720 1675

‘

S 1 1

€ 70.00 121.00

‘

12152

Clamp. width Clamp. depth R mm mm g

‘

71 14 03 11 71 14 03 12

1 2

20–150 40–200

80 130

71 12 00 11 71 12 00 12 71 12 00 13

1 2 3

11042

Clamp. width Clamp. depth R mm mm g 10–60 10–70 10–100

45 65 80

245 261 560

920 2235

S 1 1

93.00 156.00

Battery terminal pullers

size

Clamp. width Clamp. depth R mm mm g

‘

71 18 00 11 71 18 00 12 71 18 00 13

Two arm pullers

two-armed, with swivelling extractor hooks and lateral clamp clip, zinc plated; when the clamp clip is tightened, the claws of the extractor hooks locate under the part to be extracted and lever it free as force is applied before extraction begins; for extracting gearwheels, ball bearings, pulleys, drop arms and similar parts from shafts or axles; the clamp clip presses the extractor hooks firmly against the part being extracted.

1 2 3

10–60 10–70 10–100

45 65 80

299 340 692

11060

‘

Clamp. width Clamp. depth R mm mm g

‘

20–70 20–100 30–150

85 100 150

€ 57.50 58.50 62.00

Internal pullers

size

Clamp. width mm

R g

0 1 1a 2 3 5 6 7 8

8–12 12–16 16–20 20–27 27–36 36–46 46–58 58–70 70–100

100 110 120 131 365 385 558 612 1659

1 1 1 1 1 1 1 1 1

‘

1 2 3

1 1 1

for extracting ball bearings, bearing outer races and bushes, zinc plated; to be used with Counter stay No 11061 and Slide hammer No 11062; even bearings which are tight up against the walls are securely gripped due to the excellent clamping effect.

‘

71 19 00 11 71 19 00 12 71 19 00 13

‘

Code size

€ 37.00 37.30 44.70

‘

Code

1 1 1

€

‘

11055

three-armed, with a self-centring quick-action clamp and automatic feed, zinc plated; for extracting battery terminal clamps, smaller ball bearings, pulleys etc.; as force is applied through the spindle, the extractor hooks automatically apply increasing force to the part being extracted; particularly suited to car electrics, compressed air system repairs and similar applications due to the compact design and small hooks.

‘

size

‘

Three arm pullers

three-armed version with swivelling, double-action extractor hooks, zinc plated; for extracting gearwheels, ball bearings, pulleys and similar parts from shafts or axles; for removing ball bearings, bearing outer races and bushes from holes; for internal extraction, simply swivel the hooks and turn the spindle round or just turn the hooks round.

Code

1211 1643 2907

S 1 1 1

€ 118.00 137.00 185.00

71 16 00 10 71 16 10 11 71 16 00 21 71 16 00 12 71 16 00 13 71 16 00 15 71 16 00 16 71 16 00 17 71 16 00 18 1

€ 45.10 45.10 45.10 51.00 54.00 74.50 95.00 124.00 192.00

‘

265

Pullers 11061

Counter stays

12614

to be used with Internal Puller No 11060; zinc plated; insert and open up the internal puller; screw the spindle of the counter-stay into the internal puller; extract the workpiece.

Pullers

zinc plated; for use with No 12613 of same sizes; for extracting ball bearings, roller bearings, bushes, wheels and other tight fitting parts; the puller is connected to separator No 12613 to enable the workpiece to be extracted.

‘

Code

size

suitable for No 11060

1 2 3

sizes 0–2 sizes 3–7 size 8

R g

‘

71 17 00 11 71 17 00 12 71 17 00 13

654 1500 2317

S 1 1 1

€ 42.90 66.50 133.00

‘

Code

size

R g

910 1220 2800 6000

1 1 1 1

L mm

R g

100 150 150

89 233 743

1 1 1

Clamp. width Extraction bolts mm mm

‘

71 04 00 10 71 04 00 11 71 04 00 12 71 04 00 13

0 1 2 3

45–110 55–140 60–215 85–295

110 155 200 315

€ 56.50 90.50 137.00 204.00

‘

11062

Slide hammers

V 12614

to be used with Internal Puller No 11060; zinc plated; for extracting ball bearings if it is not possible to use Puller No 11061 because there is insufficient space.

Extensions

1 pair, for use with puller No 12614; extensions for the extraction bolts on the puller for use with longer workpieces.

‘

Code

R g

suitable for size No 11060

‘

71 16 10 01 71 16 10 02

1 2

sizes 0–2 sizes 3; 5

650 1435

‘

S 1 1

€ 49.10 80.50

‘

Code

size for No

‘

79 44 00 11 79 44 00 12 79 44 00 13

1 2 3

12614-0, -1 12614-2 12614-3

€ 15.70 25.80 29.70

‘

12613

Separating fixtures 11030

zinc plated; for use with No 12614 of same sizes; for separating and extracting ball bearings, roller bearings, bushes, wheels and other tightly fitting parts; applying uniform pulling force to the side bolts will gently separate workpieces; apply puller No 12614; apply force to pull off.

Universal wheel hub pullers

with three extractor hooks, zinc plated; for extracting wheel hubs on HGV’s and cars up to a hole diameter of 225 mm; the axially mounted threaded bush enables the workpiece to be freed by gently tapping the end of the spindle.

‘

Code

size

Clamp. width mm

Opening mm

R g

0 1 2 3

5–60 12–75 22–115 30–155

60 75 115 155

562 787 2100 4462

1 1 1 1

‘

71 03 00 10 71 03 00 11 71 03 00 12 71 03 00 13 ‘

€ 57.50 72.50 119.00 188.00

‘

Code

size

Arms

R g

1 2

3 5

3566 4568

1 1

R g

524

‘

71 11 00 13 71 11 00 15

€ 159.00 204.00

‘

H 11030

Arm for No 11030

1 piece ‘

Code ‘

79 10 00 10 ‘

266

€ 24.50

11041

Ball joint separators

12623-1

for forcing out ball pins on vehicles, zinc plated.

Ball joint separator

for vehicles with aluminium chassis; zinc plated; for extracting ball-joints, especially on Audi A6 and A8 after model year 1999 and for other vehicles with limited work space.

‘

Code

Fork opening mm

Clear height mm

R g

60–80

1577

‘

71 05 00 12

€ 134.00

‘

Code

A mm

B mm

C mm

R g

1 2 3 4

18 23 29 39

37 45 55 70

37 45 60 80

309 476 1300 2000

1 1 1 1

‘

71 23 00 11 71 23 00 12 71 23 00 13 71 23 00 14

12623-3

size

€ 39.60 51.50 66.50 87.00

Ball joint separator

on heavy goods vehicles, buses and construction site vehicles; zinc plated.

‘

size 1 for passenger vehicles size 2 for passenger vehicles and vans size 3 + 4 for trucks ‘

‘

Spindles

Code

‘

Code

for puller No

R g S

11040-1; 11042-1 11040-2; 11042-2 11040-3; 11042-3 11050-1, -2; 11051-1, -2; 11056; 12150-1, 12152-1, 12614-0, -1 11050-3, -4; 11051-3, -4; 12614-2 11050-5, -6 11055-1 11055-2 11055-3 11041-1 11041-2 11041-3 11041-4 11053-1, -2; 11054-1, -2 12150-2; 12152-2

108 120 80

1 1 1

14.80 18.90 14.30

171 590 1210 177 176 592 80 94 360 231 880 440

1 1 1 1 1 1 1 1 1 1 1 1

31.80 48.60 93.50 42.80 47.50 88.50 19.10 19.10 56.00 74.50 81.50 53.00

‘

79 28 10 11 79 28 11 11 79 28 10 12 79 28 10 13

SP 11040-1 SP 11040-2 SP 11040-3 SP 11050-1

79 28 10 14 79 28 10 15 79 28 10 16 79 28 10 17 79 28 10 18 79 28 10 19 79 28 10 20 79 28 10 21 79 28 10 22 79 28 10 23 79 28 10 34 1

SP 11050-3 SP 11050-5 SP 11055-1 SP 11055-2 SP 11055-3 SP 11041-1 SP 11041-2 SP 11041-3 SP 11041-4 SP 11053-1 SP 12150-2

Fork opening mm

Clear height mm

R g

35–45

115

6000

R g

3438

‘

€

71 05 00 14

€ 286.00

‘

12623-4

Ball joint separator

on medium-sized and heavy HGV’s, buses and construction site and other special vehicles; zinc plated.

‘

Code

Fork opening Clear height mm mm

‘

71 05 00 15

27–36

€ 153.00

‘

12616

Universal ball joint separator

zinc plated, DIN/ISO 7803, for extracting ball-joints on cars and light delivery vans.

‘

Code

size

Fork opening mm

Clear height mm

R g

18–22

20–50

611

‘

71 05 00 10

€ 76.00

‘

12623

Ball joint separator

zinc plated; for extracting ball-joints especially on BMW, Fiat, Ford, Mercedes-Benz, Nissan, Opel, Toyota, VW/Audi and Volvo cars.

‘

Code

Fork opening mm

Clear height mm

R g

12–50

1284

‘

71 05 00 11

€ 97.50

‘

267

Certified to DIN EN ISO 9001

After STAHLWILLE was certified, as one of the very first companies back in 1990, to DIN EN ISO 9002, our Quality Assurance System was also certified to DIN EN ISO 9001 in 1992.

Special automotive tools

STAHLWILLE special-purpose tools for the automotive industry Together with leading automotive manufacturers, STAHLWILLE develops special-purpose tools and brand-specific sets of tools. This continuous development and enhancement process covering tools for production and workshops ensures that the tools we make keep pace with the latest developments in the industry.

Tidy tool management: STAHLWILLE tool sets for car repairs Carefully selected suites of tools for Tool Trolleys and Tool Boxes ensure optimised workflows. Whether it is in the garage, in production or in the pits, many mechanics welcome the benefits afforded by model and marque specific tools to guarantee safe, timesaving work.

Problem solver: STAHLWILLE special-purpose car pliers Often enough, corroded or jammed parts in hard-to-reach places slow down repair and servicing jobs in the engine space. With diesels, this includes the heater plug sockets. STAHLWILLE heater plug socket pliers make it that much easier to remove and refit these plug sockets, especially when the engine is still hot.

270

Better safe than sorry: STAHLWILLE sockets It would be hard to imagine garage and production environments without compressed air tools. Hardly surprising, then, that STAHLWILLE offer such a wide range of tried-and-tested, job-specific sockets, e. g. the wheel-nut socket with the closelyfitting plastic sleeve. This prevents damage to wheel bolts, wheel nuts and the bolt holes especially on alloy wheels.

The specialists: STAHLWILLE KABELEX® Efficiency and economy in the workplace – at a time when it pays to be competitive, removing cables on vehicles safely and quickly gives you that advantage. This is why STAHLWILLE offers over 40 different cable removing tools for cars. They are available individually, in carefully selected sets or as special sets for specific vehicles. The fine but highly resistant blades are made of chrome vanadium and special spring steel.

Unbreakable: Special tools for car glass The professionals really appreciate STAHLWILLE products for quickly and accurately removing and fitting car glass. Twin suction lifters and a three-component glass removal set ensure that windscreens and other car glass are easily and safely removed, fitted and transported.

A question of torque: Friction gauger Setting steering systems accurately is a critical job – and adhering to torque settings and coefficients of friction is a crucial part of it. This is what STAHLWILLE created the easily-operated Friction gauge No 73Nm/15 with a range of 2–15 N m.

Thick or thin: Measuring the thickness of brake discs Checking the state of the brake discs is a valuable contribution to safety on the roads. STAHLWILLE offers a vernier calliper which enables the garage to easily check the discs in situ and compare the dimensions with the manufacturer's instructions.

271

Special automotive tools 1520 MercedesBenz

16 pieces, for Mercedes-Benz. Content: No 1501, 1504, 1508: ejection tools for contact sizes O 1.5 and 2.5 mm No 1511, 1514, 1518: dismantling sleeves for contact sizes O 1.5 and 2.5 mm No 1553, 1591: cable extractor tools for contact sizes y 2.8 and 5.8 mm No 1556: cable extractor tool for Micro-Timer II, III contacts y 1.6 mm No 1559: cable extractor tool for Maxi-Power Timer contacts y 9.5 mm No 1578K-1: cable extractor tools for SLK contacts (primary) y 2.8 mm No 1578K-2: cable extractor tool for SLK contacts 97 (primary and secondary) y 2.8 mm No 1584, 1585: cable extractor tools for soldered contacts with contact O 2.5 and 4.0 mm No 1587: cable extractor tool for flat plug-in sockets, E-95 contacts y 1.65 mm No 1589K: cable extractor tool for flat plug-in sockets, LSK contacts y 8 mm

STAHLWILLE KABELEX® Protect For workshops and cable configuration (Kabelex table see page 312) D Bicoloured handle: - with locking blade cover, to protect the fine blade and guard against injury. - easier to handle for fine and intricate work on miniature connectors.

‘

Code 96 74 62 04

1550 BMW

D Special sets for vehicle makes: BMW, Mercedes-Benz, Opel, VW/Audi/Seat/Skoda/Porsche, MAN/Volvo and Renault/PSA. D Over 40 different cable extractors available. D Blades made of extremely tough and durable chrome vanadium and special spring steel.

Tool set KABELEX®

11 pieces, for VW/Audi, Seat, Skoda, Porsche. Content: No 1501, 1502: ejection tools for contact sizes O 1.5 and 3.5 mm No 1511, 1512: dismantling sleeves for contact sizes O 1.5 and 3.5 mm No 1553, 1557, 1558, 1591: cable extractor tools for contact sizes y 2.8; 4.8 and 5.8 mm No 1556: cable extractor tool for Micro-Timer II, III contacts y 1.6 mm No 1556-1: cable extractor tool for flat plug-in sockets with asymmetrically positioned latches in terminals with two release channels y 0.64 mm No 1574: cable extractor tool for Micro Timer I contacts y 1.6 mm ‘

R g

1070

‘

96 74 62 03 ‘

10 272

2040

€ 558.75

‘

D Also available in carefully selected sets.

Code

R g

‘

D Releases cable connectors quickly and easily without cutting them off – saves time and money.

1510 VW/Audi

Tool set KABELEX®

€ 401.05

Tool set KABELEX®

13 pieces, for BMW. Content: No 1501, 1502, 1504, 1508: ejection tools for contact sizes O 1.5; 3.5 and 2.5 mm No 1511, 1512, 1514, 1518: dismantling sleeves for contact sizes O 1.5; 3.5 and 2.5 mm No 1553: cable extractor for plugs with single release channel y 2.8 mm and 5.8 mm No 1578K-1: cable extractor for SLK contacts (primary) y 2.8 mm No 1578K-2: cable extractor for SLK contacts 97 (primary and secondary) y 2.8 mm No 1591: cable extractor tool for contact sizes y 2.8 and 5.8 mm No 1589K: cable extractor tool for flat plug-in sockets, LSK contacts y 8 mm ‘

Code

R g

1795

‘

96 74 62 07 ‘

€ 392.50

% 1700 Tool set KABELEX® MAN/Volvo

1570/1

6 pieces. Content: No 1501, 1502: ejection tools for contact sizes O 1.5 and 3.5 mm No 1511, 1512: dismantling sleeves for contact sizes O 1.5 and 3.5 mm No 1553, 1591: cable extractor tools for contact sizes y 2.8 and 5.8 mm

14 pieces, for MAN/Volvo, Mercedes-Benz trucks. Content: No 1501, 1502, 1503, 1506: ejection tools for contact sizes O 1.5; 3.5; 4.0 (ABS) and 4.0 mm No 1511, 1512, 1513, 1516: dismantling sleeves for contact sizes O 1.5; 3.5; 4.0 (ABS) and 4.0 mm No 1523: assembly sleeve (ABS) No 1553, 1591: cable extractor tools for contact sizes y 2.8 and 5.8 mm No 1576: cable extractor tool for flat plugs without box y 2.8 mm No 1577: cable extractor tool for VKR Box contacts y No 1577-1: cable extractor tools for MKR/MKS contacts y 1.5 mm

‘

Code 96 74 63 03

96 74 62 08

1815

710

€ 169.25

‘

1570/2

R g

‘

R g

‘

Code

Basic set KABELEX®

€ 470.15

‘

1720 Tool set KABELEX® Renault/PSA 7 pieces, for Renault/PSA (Citroën and Peugeot). Content: No 1505: ejection tool for contact sizes O 2.3 mm No 1515: dismantling sleeve for contact sizes O 2.3 mm No 1553, 1554, 1591: cable extractor tools for contact sizes y 2.8 and 5.8 mm No 1556: cable extractor tool for Micro-Timer II, III contacts y 1.6 mm No 1574: cable extractor tool for Micro-Timer I contacts y 1.6 mm

Universal set KABELEX®

12 pieces. Content: No 1501, 1502, 1505: ejection tools for contact sizes O 1.5; 3.5; 2.3 mm No 1511, 1512, 1515: dismantling sleeves for contact sizes O 1.5; 3.5; 2.3 mm No 1553: cable extractor tool for plugs with one release channel y 2.8 and 5.8 mm No 1556: cable extractor tool for Micro-Timer II, III contacts y 1.6 mm No 1559: cable extractor tool for Maxi-Power Timer contacts y 9.5 mm No 1562: cable extractor tool for Pit-Pod contacts No 1574: cable extractor tool for Micro-Timer I contacts and ABS plug-in housing y 1.6 mm No 1591: cable extractor tool for plugs with two release channels y 2.8 and 5.8 mm ‘

Code

R g

1130

R g

360

‘

96 74 63 04

€ 377.90

‘ ‘

Code

R g

670

‘

96 74 62 10

231.25

‘

1560

1590

€

Tool set KABELEX®

10 pieces, for round plug connections (incl. ABS). Content: 1 each No 1501: ejection tool for contact sizes O 1.5 mm 1 each No 1502: ejection tool for contact sizes O 3.5 mm 1 each No 1503: ejection tool for contact sizes O 4.0 mm assembly or dismantling sleeve (ABS) 2 each No 1511: dismantling sleeves for contact sizes O 1.5 mm (1 each mounted) 2 each No 1512: dismantling sleeves for contact sizes O 3.5 mm (1 each mounted) 2 each No 1513: dismantling sleeves for contact sizes O 4.0 mm (1 each mounted) 1 each No 1523: assembly sleeve (ABS)

Tool set KABELEX®

5 pieces, for flat plug-in sockets. Content: No 1551, 1552: cable extractor tools for flat plug-in sockets y 2.8 and 5.8 mm in terminals with double release channel No 1553, 1554, 1555: cable extractor tools for contact sizes y 2.8 and 5.8 mm in terminals with single release channel

‘

Code ‘

96 74 62 02

€ 144.60

‘

Code

R g

520

‘

96 74 62 01

€

159.30

‘

273

Special automotive tools Ejection tools KABELEX®

1501–1508

1553–1555

for round snap-in receptacles, including dismantling sleeve.

Cable extractor tools KABELEX®

for flat plug-in sockets locked in terminals with single release channel.

‘

Code

for contact sizes R O mm g S

‘

€

Code

for contact sizesR y mm g S

‘

96 74 62 30 96 74 62 31 96 74 62 32 96 74 62 33 1

96 74 62 34 96 74 62 35 96 74 62 36 96 74 60 37

1501 + 1511 (e.g. BMW, MercedesBenz, Fiat, MAN, Opel, Porsche, Seat, Skoda, VW/Audi) 1502 + 1512 (e.g. BMW, MercedesBenz, Fiat, MAN, Opel, Porsche, Seat, Skoda, VW/Audi) 1503 + 1513 for ABS (trucks) or assembly sleeve No 1523 (e.g. Mercedes-Benz, MAN, Scania) 1504 + 1514 (e.g. BMW, MercedesBenz, Opel) 1505 + 1515 (e.g. Ford, Opel, PSA, Renault) 1506 + 1516 (e.g. Mercedes-Benz trucks, MAN, Scania) 1507 + 1517 (e.g. Scania gears GRS 900) 1508 + 1518 (e.g. BMW, MercedesBenz)

74 62 00 03 1.5

34.70

3.5

38.25

4.0

50.95

2.5

39.75

2.3

35.25

4.0

51.20

1.5

42.15

74 62 00 04 74 62 00 05

1553 (e.g. BMW, Mercedes-Benz, Ford, MAN, Opel, Porsche, PSA, Renault, Seat, Skoda, VW/Audi) 1554 (e.g. BMW, PSA, Renault) 1555 (e.g. BMW)

50.15

16 16 16

1 1 1

19.80 19.50 20.60

‘

Cable extractor tool KABELEX®

1556

for flat plug-in sockets, Micro Timer II, III contacts, e.g. Mercedes-Benz, Opel, Porsche, PSA, Renault, Saab, Seat, Skoda, VW/Audi. ‘

Code ‘

for contact sizes y mm

R g

1.6

74 62 00 06 1.5

2.8; 5.8 2.8 5.8

€

€ 56.00

‘

for flat plug-in sockets with asymmetrically positioned latches in terminals with two release channels, Seat, Skoda, VW/Audi.

‘

Code

for contact sizes L inside outside R O mm mm O mm O mm g S

‘

78 60 00 01 78 60 00 02 78 60 00 03 78 60 00 04 78 60 00 05 78 60 00 06 1

78 60 00 16 78 60 00 07 78 60 00 18 1

1511 for No 1501 1512 for No 1502 1513 for No 1503 1514 for No 1504 1515 for No 1505 1516 for No 1506 (for MOLEX contacts 4.0 mm ) 1516-A for No 1506 (for AMP contacts 4.0 mm) 1517 for No 1507 1518 for No 1508 (3 x 120° slotted)

1.5 3.5 4.0 2.5 2.3

30 30 45 30 35

2.9 4.4 6.0 4.0 3.0

3.3 5.0 6.5 4.4 3.3

1 1 1 1 1

Cable extractor tool KABELEX®

1556-1

Dismantling sleeves KABELEX®

1511–1518

€

10 10 10 10 10

1.90 2.15 2.65 2.55 2.45

‘

Code ‘

74 61 20 06

5.6

6.0

2.90

4.0 1.5

30 26

5.4 2.3

5.8 2.8

1 1

10 10

2.90 2.65

1.5

2.7

3.5

9.35

1523

74 62 00 07 74 62 00 08

for contact sizes L O mm mm

Code ‘

78 61 00 01

1559

4.0

inside outside R O mm O mm g S 4.0

6.5

€ 11.30

‘

1551/1552

Cable extractor tools KABELEX®

57.50

Cable extractor tools KABELEX®

for contact sizes y mm

R g

2.8 4.8

21 22

1 1

1557 1558

€ 45.10 47.30

for flat plug-in sockets, Maxi Power Timer contacts, Mercedes-Benz, VW/Audi.

Code ‘

74 62 00 09

No 1551 1552

for contact sizes y mm

R g

9.5

€ 48.30

‘

1562

‘

Cable extractor tool KABELEX®

‘

for flat snap-in receptacles e.g. BMW, Ford, Opel, Porsche, Seat, Skoda, VW/Audi.

74 62 00 01 74 64 00 02

‘

Code

‘

for No 1503

0.64

€

‘

Code

Assembly sleeve KABELEX ABS

for flat plug-in sockets with asymmetrically positioned latches in terminals with two release channels, Seat, Skoda, VW/Audi.

‘

R g

‘

1557/1558 4.0

for contact sizes y mm

R g

2.8 5.8

19 19

1 1

€ 33.10 34.20

Cable extractor tool KABELEX®

for flat plug-in sockets, Pit-Pod contacts, all vehicle makes.

‘

Code

‘

74 62 00 12 ‘

274

for contact sizes y mm

R g

various

€ 43.20

% Cable extractor tool KABELEX®

1564*

Cable extractor tool KABELEX®

1577

for flat plug-in sockets, Ducon contacts in terminals with single release channel, Opel.

for flat plug-in sockets, VKR Box contacts, e.g. MAN. ‘

‘

R g

for contact sizes y mm

Code ‘

74 62 00 14

1.5

€

29.10

Code

R g

‘

74 62 00 27

€ 69.50

‘

* to be discontinued ‘

Cable extractor tool KABELEX®

1577-1 Cable extractor tools KABELEX®

1565–1568

for flat plug-in sockets, MKR/MKS contacts, e.g. MAN/Volvo.

for flat plug-in sockets, Ducon-contacts in terminals with two release channels, Opel.

‘

Code

‘

Code

for contact sizes y mm

‘

74 62 00 15 74 62 00 16 74 62 00 17 74 62 00 18

1565* 1566* 1567* 1568*

1.5 2.8 4.8; 6.3 9.5

R g

18 19 22 45

1 1 1 1

‘

€ 33.40 34.00 34.30 31.50

‘

* to be discontinued ‘

for flat plug-in sockets, SLK contacts (primary), e.g. BMW, Mercedes-Benz. for contact sizes y mm

R g

2.8

€ 36.60

‘

Cable extractor tool KABELEX®

1578K-2 R g

2.8

€ 50.50

for flat plug-in sockets, SLK contacts 97 (primary, secondary), e.g. BMW, Mercedes-Benz. ‘

for contact sizes y mm

R g

2.8

‘

1574

€ 62.00

Cable extractor tool KABELEX®

1578K-1

74 61 00 28

for contact sizes y mm

74 62 00 22

‘

1.5

74 61 50 27

Code

for flat plug-in sockets with asymmetrically positioned latches in terminals with two release channels, Ford, Renault.

Code

R g

‘

Cable extractor tool KABELEX®

1572

for contact sizes y mm

Cable extractor tool KABELEX

Code

‘

74 61 20 28

€ 49.10

‘

for flat plug-in sockets, Micro-Timer I contacts and ABS plug-in housing, Fiat, Ford, Mazda, Opel, PSA, Renault, Saab, VW/Audi.

1584/1585

Cable extractor tools KABELEX®

for round soldered contacts, Mercedes-Benz.

‘

Code ‘

for contact sizes y mm

R g

1.6

74 62 00 24

€

‘

24.20

‘

Code

‘

1575

Cable extractor tool KABELEX

74 62 00 34 74 62 00 35

for contact sizes O mm

R g

4.0 2.5

13 11

1 1

1584 1585

€ 22.00 21.60

‘

for round soldered pin contacts, Ford, for flat plug-in sockets (retention by locking device on terminal), Fiat, Mazda, Toyota.

1587

Cable extractor tool KABELEX®

for flat plug-in sockets, E-95 contacts, Mercedes-Benz.

‘

Code ‘

for contact sizes O mm

74 62 00 25

R g S

for contact sizes y mm

1.5

2.8; 5.8

€

19.10

‘

Code ‘

1576

Cable extractor tool KABELEX

74 62 00 37

for contact sizes y mm

R g

1.65

€ 56.50

‘

for flat plug-in sockets with single latch (flat plug without box), e.g. MAN. ‘

Code ‘

74 62 00 26

for contact sizes y mm

R g

2.8

€

45.10

‘

275

Special automotive tools 1588*

Cable extractor tool KABELEX®

10775

Dinging hammer

for GSK flat fuse contacts (1, 2 and 3 terminal version; 2, 4 and 6 latches), Mercedes-Benz.

‘

Code

R g

‘

74 61 00 38

‘

€ 49.80

‘

Code

O mm

L1 mm

L2 mm

R g

30/40

300

155

516

‘

70 13 00 02

€ 38.10

‘

* to be discontinued ‘

1589K

10776

Cable extractor tool KABELEX®

Special planishing hammer

large extra thin faces, square face chequered.

for flat plug-in sockets, LSK contacts, e.g. BMW, Mercedes-Benz. ‘

Code ‘

74 61 00 39

for contact sizes y mm

R g

‘

€ 36.80

Code

O mm

u mm

L1 mm

L2 mm

R g

320

115

521

‘

€

‘

70 13 00 10

73.50

‘

Cable extractor tool KABELEX®

1591

10780

for flat plug-in sockets in terminals with two release channels, Junior Power Timer contacts, Standard Power Timer contacts, e.g. BMW, Mercedes-Benz, Fiat, Ford, MAN, Opel, PSA, Renault, Saab, VW/Audi.

Planishing hammer

short.

‘

Code ‘

74 62 00 41

for contact sizes y mm

R g

2.8; 5.8

S 1

€ 58.00

‘

Code

O mm

u mm

L1 mm

L2 mm

R g

300

100

346

‘

70 13 00 03

€ 33.50

‘

10785

Planishing hammer

short, round face chequered.

Car body repair tools and pullers

10980

Panel beating set ‘

7 pieces, in steel case. Content: Hammers: No 10785; 10790; Dollies: No 10838; 10841; 10861; 10865; Pliers: No 10935

Code

O mm

u mm

L1 mm

L2 mm

R g

300

484

‘

70 13 00 04

€ 52.50

‘

10790

Pecking hammer

with round face and ball pein. ‘

Code

R kg

7.35

‘

98 81 20 01

€ 282.60

‘ ‘

10998

Panel beating set

Code

O mm

L1 mm

L2 mm

R g

18/41

300

158

480

‘

70 13 00 05

17 pieces, in steel case No 83/09. Content: Hammers: No 10775; 10785; 10790; 10811; 10950; 10955/35; Dollies: No 10830; 10835; 10840; 10850; 10861; Pliers: No 10910; 10930; Special Spoons: No 10890; 10895; 10900; Body File Holder: No 10905; Padlock: No 12932

€ 40.10

‘

10795

Pecking hammer

with round face and acorn shaped pein.

‘

Code

R kg

18.3

‘

Code €

70 13 00 06 ‘

98 81 21 01 ‘

276

841.80

O mm

L1 mm

L2 mm

R g

20/41

300

160

460

‘

€ 40.00

$ 10800

Pecking hammer

10832

Planishing anvil

short, round flat face and pointed pein.

‘

Code

O mm

L1 mm

L2 mm

R g

300

135

360

‘

70 13 00 07

€ 40.00

‘

Code

faces/mm

R g

1160

‘

70 21 00 15

85 x 55 / 45 x 40

€ 59.50

‘

10805

Pecking hammer 10835

round flat face, oblong, thin pein, approx. 1 mm thick.

Wedge dolly

‘ ‘

O mm

Code

L1 mm

L2 mm

R g

‘

70 13 00 08

300

160

450

S 2

Code

€

‘

42.90

‘

70 21 00 02

L mm

b mm

h mm

R g

130

958

€ 55.50

‘

10806

10838

Pecking hammer

Anvil dolly

extra large thin face and pein.

‘

Code

‘

Code

O mm

L1 mm

L2 mm

R g

300

135

382

‘

70 13 00 11

L mm

b mm

h mm

R g

1068

‘

€

70 21 00 03

€ 40.00

‘

56.50

‘

10840 10811

Special anvil dolly

Planishing and grooving hammer

‘

Code

‘

L mm

b mm

h mm

R g

1250

‘

Code

O mm

y mm

L1 mm

L2 mm

R g

36 x 10 320

160

531

‘

70 13 00 12

€

70 21 00 04 ‘

33.80

10841

‘

10812

€ 54.00

Thin dolly

Planishing and grooving hammer

‘

Code

O mm

y mm

L1 mm

L2 mm

R g

25 x 5

300

115

350

‘

70 13 00 13

€ 35.20

Code

L mm

b mm

h mm

R g

107

984

‘

70 21 00 05

€ 41.10

‘

10830

10842

Dolly

Diabolo dolly

‘

Code

L mm

b mm

h mm

R g

‘

70 21 00 01 ‘

80/100

70/45

1450

‘

S 1

€ 59.00

Code

O mm

h mm

R g

658

‘

70 21 00 06

€ 40.10

‘

277

Special automotive tools 10845

Toe dolly

10880

Bumping spoon

‘

Code

L mm

b mm

h mm

R g

120

770

‘

70 21 00 08

‘

€ 41.10

‘

Code

L1 mm

L2 mm

R g

460

200

1900

L mm

R g

500

2210

‘

70 22 00 01

€ 68.00

‘

10850

L1 = length overall L2 = working length

Anvil block

‘

axe shape.

10885

Bumping spoon

‘

Code

L mm

b mm

h mm

R g

65/50

25/8

140

860

‘

70 21 00 09

€ 36.60

‘

Code

10855

Universal anvil dolly

‘

70 22 00 02

€ 81.50

‘

10890

Body spoon

‘

Code

L mm

b mm

h mm

R g

70/60

50/45

1200

‘

70 21 00 10

€ 61.00

‘

Code

L1 mm

L2 mm

R g

270

130

520

‘

10861

Toe dolly

70 22 00 03

€ 32.70

‘

chequered surface.

10895

Body spoon

‘

Code

L mm

b mm

h mm

R g

120

1033

‘

70 21 00 14

€ 43.60

‘

Code

L1 mm

L2 mm

R g

390

200

970

L mm

R g

400

1100

‘

70 22 00 04

10865

Heel dolly

€ 53.00

‘

L1 = length overall L2 = working length ‘

10900

Flange tool

with leather cap. ‘

Code

L mm

b mm

h mm

R g

1070

‘

70 21 00 12

€ 40.30

‘

Code ‘

10866

Dolly

70 22 00 05

€ 31.50

‘

with three flat and three shaped faces.

10925

Soldering wedges, wood

5 pieces. ‘

Code

L mm

b mm

h mm

R g

115

1550

‘

70 21 00 16

€ 64.00

‘

Code

R g

364

‘

77 53 00 01

‘

278

€ 21.80

$ 11005

Pry bar

File blades for No 10922

head and point polished. ‘

‘

L mm

Code

O mm

R g

‘

72 09 00 00

400

500

€

38.50

Code 79 06 00 14

‘

11006

Lever bar

teeth per inch

L R mm g

350 208

31.70

350 216

41.50

‘

79 06 00 04

special steel, bright nickel-plated.

10917 coarse, without swarf breaker, half round, angled cut 9 10921 coarse, without swarf breaker, half 9 round, radial cut

€

‘

Code

L mm

W mm

R g

400

500

‘

72 09 00 02

30.50

‘

11007

12752

€

Lever bar

special steel, bright nickel-plated.

Tin snips

lever action, spring-assisted for self-opening action. Heavy duty cutting: sheet steel up to 1.8 mm or stainless steel sheet up to 1.2 mm. ‘

‘

L mm

Code

R g

W mm

‘

72 09 00 03

400

643

€

44.70

‘

Code

L mm

shape

L ''

R g

532 532

1 1

‘

75 23 00 01 75 23 00 02

L ) R 2)

260 260

10 10

1/2 1/2

€ 67.00 66.50

‘

10905

) left hand cutting ) right hand cutting

Body file holder

2 ‘

with coarse blade.

12753 ‘

Code

L mm

b mm

h mm

R g

365

110

760

‘

72 16 00 00

€

Tin snips

lever action, spring-assisted for self-opening action. Heavy duty cutting: sheet steel sheet up to 1.8 mm or stainless steel sheet up to 1.2 mm.

87.00

‘

L = Length, b = Width, h = Height

‘

shape

L mm

L ''

R g

L 1) R 2)

260 260

10 1/2 10 1/2

473 473

1 1

jaw width mm

L mm

R g

15 30

300 300

831 847

1 1

‘

Code ‘

10923

Body file holder

75 24 00 01 75 24 00 02

wooden, for flat blades.

€ 66.00 66.00

‘

) left hand cutting ) right hand cutting

2 ‘

Code

L mm

R g

530

300

‘

72 20 00 02

‘

€

10642

23.40

‘

Set-off pliers

for offsetting sheet metal edges up to 1 mm thickness, ensuring shoulder free surface. Handles fitted with H.D. plastic sleeves.

Spare blades for No 10905 and No 10923 ‘

Code

teeth per inch

L mm

R g

€

350

321

37.50

‘

79 06 00 01 79 06 00 02 79 06 00 03 79 06 00 12 1

79 06 00 13

10906 fine, radial cut 10907 medium, radial cut 10908 coarse, radial cut 10915 medium, angled cut 10916 coarse, angled cut

‘

Code

350

286

36.70

350

279

32.30

350

282

32.00

350

252

30.30

‘

10922

Body file holder

wooden, for half round radius file blades. ‘

Code 72 20 00 01

76 49 00 01 76 49 00 02

1 2

€ 82.50 84.00

‘

10643

Punch pliers

for use on sheet metal up to 1 mm thickness (hole spot welding – MAG welding technique). Use in conjunction with setoff pliers No 10642. Handles fitted with H.D. plastic sleeves. ‘

L mm

R g

‘

size

‘

530

260

S 1

€ 25.50

Code

size

O mm

L mm

R g

5.5

300

806

‘

76 59 00 02

€ 125.00

‘

279

Special automotive tools 12727

Spot weld milling cutter

12770/2

Lever bar

HSSE steel, for spot-weld removal on car body or sheet metal construction. Replaceable milling cutter size 10 mm. Cutting depth adjustment by set screw, avoids distortion damage to sheet metal.

for levering off fragile caps, decorative trim (strips and rings), switches, rubber or fabric trim without damaging them. Finely honed, rounded edges ensure the vehicle paintwork and surrounding materials are not damaged or scratched.

‘

Code

L mm

R g

‘

72 26 00 01

€ 25.10

‘

12728

Code

L mm

R g

185

‘

74 59 01 02

€ 22.90

‘

12770/3

Replacement milling cutter

Plastic lever bar

for removing trim and rubbing strips of all kinds on bodywork and around windscreens, rear and side windows. The broad area of contact prevents damage such as scratching of painted surfaces, deformation of strips and damage of glass. ‘

Code

L mm

R g

€

11.40

‘

79 26 00 01

‘

Code 74 59 00 03

‘

L mm

R g

300

209

‘

€ 39.20

‘

Spot weld drills for clean, burr-free removal of spot-weld. Self-cutting centre point avoids running off spot weld. Can be reground.

Tools for fitting/removing vehicle glass 10350N

‘

Code

O mm

R g

7 8

18 24

5 5

‘

72 27 00 07 72 27 00 08

12729 12730

€ 17.90 22.00

‘

Tools for vehicle doors 12769

Windscreen replacement set VERITRAC

1 guide handle 1 draw handle 1 coil cutting wire (50 m) 2 double suction lifters

‘

Code

Universal alignment tool for automobile doors

98 74 27 11

10351N

74 45 00 10

‘

R g

720

1815

€

96 74 27 11

74 59 01 01

458

10352

L mm

R g

260

150

€ 19.90

‘

Code 74 28 00 01 ‘

280

90.50

Two double suction lifters

R g

1405

‘

€

Suction cap dia. 120 mm, mechanical action with safety lock. Special ABS-plastic, oil and acid resistant. With belt slots in the handles. Carrying capacity 60 kg.

Lever bar

‘

191.00

powder coated for improved slide effect, for removal of doors trims in cars.

Code

R g

‘

L mm

‘

€ 314.50

as 10350N, but without double suction lifters.

‘

12770

Windscreen removal set VERITRAC

Code

‘

Code

1760

‘

Scope of application: Almost all car and van doors, boot lids and hatchback doors. The application for this tool is door locks and door guide pins. Also suitable on door lock shackles, i.e. as on Opel and Mercedes-Benz. The universal alignment tool is supplied with 3 different, interchangeable special bolts, housed within the tubular handle. The handle bend is reinforced by a twin tube.

‘

R g

‘

€ 224.00

$ 10352/1

Double suction lifter

10355

Wire insert probe

for threading cutting wire through hardened adhesive, 2.5 mm steel tubing with brass handle.

Suction cap dia. 120 mm, mechanical action with safety lock. Special ABS-plastic, oil and acid resistant. With belt slots in the handles. Carrying capacity 60 kg.

‘

R g

L mm

R g

265

160

Code ‘

74 27 00 04

‘

Code 74 28 00 05

‘

R g

695

‘

€

1474/2

112.00

‘

10351/1

€ 22.00

Wire insert awl

for feeding or pulling cutting wire through hardened adhesive.

Draw handle

for drawing cutting wire through adhesive seal.

‘

Code ‘

78 03 01 02

€ 19.70

‘

Code 74 27 00 01

12718

R g

‘

€ 26.90

‘

Flat scraper

for removing residues of sealant and adhesive. ‘

10351/2

Guide handle Code

for fixing and clamping cutting wire inside vehicle.

‘

72 03 01 01 ‘

10356

‘

Code

R g

196

‘

74 27 00 02

€ 31.40

‘

10351/3

€ 17.50

Guide handle

Scraper

for removing residues of adhesive and stickers from vehicle glass. Blade 40 mm wide, 0.3 mm thick, interchangeable with cover. ‘

for fixing and clamping cutting wire inside vehicle. Extra long extension makes it especially suited to recessed glass.

Code

Length mm

Width mm

R g

165

R g

‘

74 27 00 05

€ 9.70

‘

10356R

Spare blades

‘

Code

R g

190

‘

74 27 00 06

10 pieces dispenser. € 38.60

‘

SD10351N

Spare cutting wire

‘

special alloy steel 0.6 x 0.6 mm. Easy wire removal without the rest unrolling.

Code ‘

79 27 00 15 ‘

12749

‘

Code

L m

R g

170

‘

79 27 00 11

€ 32.20

‘

10354

€ 6.50

Tension strap with ratchet

for clamping and fixing freshly fitted vehicle glass, synthetic webbing.

Scraper with reversible tungsten steel blade

for removing residues of adhesive and stickers from vehicle glass. Can also be used for scraping metal and seals. Includes angled inner hex. screwdriver. ‘

Code

L mm

R g

495

582

R g

‘

72 31 01 01

€ 72.50

‘

12749R

Spare blade

‘

Code

Width mm

R g

375

‘

74 27 00 03

€ 17.90

for scraper No 12749. ‘

‘

Code ‘

79 31 00 01

€ 48.50

‘

281

Special automotive tools Workshop sets

No 10760CV

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10; 12 mm

No 52

1/2'' a sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 27; 30; 32 mm

No 506

1/2''

D 300 mm

No 509/2

1/2''

D a 52 mm

No 509/5

1/2''

D a 130 mm

No 509/10

1/2''

D a 255 mm

No 510

1/2''

D a 71 mm

No 512

1/2''

No 4620

size 1 (0.6 x 3.5 x 75 mm); size 2 (0.8 x 4.0 x 100 mm); size 3 (1.0 x 5.5 x 125 mm); size 4 (1.2 x 6.5 x 150 mm) size 5 (1.6 x 8.0 x 175 mm)

No 4630

sizes 1; 2; 3

‘

806/10

Tool set

99 Tools, in plastic inlays (modular system see page 33–43), 9x1/3 and 1x3/3 inlays for 4 drawers, suitable for Workbench No 92KM G, Tool trolleys 97N, 97N/KM, 97H/8, 97H/KM; Tool boxes No 94N, 94N/KM, Magazine case No 920 and Wheely box No 922N.

‘

R kg

Code

€

‘

98 83 00 01

13.35

1054.50

‘

96 83 81 26

96 83 81 27

No 65 01 5 180 ‘

No 65 29 5 200 ‘

No 65 43 4 002 ‘

No 65 45 4 002 ‘

96 83 81 28

96 83 81 10

No 65 51 6 240 ‘

No 65 64 2 250 ‘

No 66 02 5 160 ‘

No 102

175 mm

No 108

150 x 6; 175 x 6 mm

No 109

size 6; 100 x 3.4 mm

No 10956

O 35 mm

No 10960

500 g

‘

96 83 81 12

96 83 81 13 ‘

‘

96 83 82 37

96 83 81 21

96 83 81 23

96 83 81 25

No 10

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 24 x 27; 30 x 32 mm

No 13

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24 mm

No 40

1/4'' a sizes 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm

No 400

1/4''

D 150 mm

No 404

1/4''

D 116 mm

No 405/2

1/4''

D a 54 mm

No 405/6

1/4''

D a 150 mm

No 407

1/4''

D a 38 mm

No 412

1/4''

No 415

1/4''

‘

282

806/9 TCS

TCS tool set

ö x

No 415

1/4''

No 10760CV

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10; 12 mm

No 52

1/2'' a sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 27; 30; 32 mm

No 506

1/2''

D 300 mm

No 509/2

1/2''

D a 52 mm

No 509/5

1/2''

D a 130 mm

No 509/10

1/2''

D a 255 mm

No 510

1/2''

D a 71 mm

No 512

1/2''

No 4620

size 1 (0.6 x 3.5 x 75 mm); size 2 (0.8 x 4.0 x 100 mm); size 3 (1.0 x 5.5 x 125 mm); size 4 (1.2 x 6.5 x 150 mm)

No 4630

sizes 1; 2; 3

‘

98 Tools, in TCS inlays (Tool Control System see page 44–59), 7x1/3, 1x2/3 and 1x3/3 inlays for 4 drawers, suitable for Workbench No 92KM G, Tool trolleys 97N, 97N/KM, 97H/8, 97H/KM; Tool boxes No 94N, 94N/KM, Magazine case No 920 and Wheely box No 922N.

‘

R kg

Code

‘

€

‘

98 83 00 04

12.53

1135.15

‘

96 83 81 75

96 83 81 76

‘

No 65 01 5 180 ‘

No 65 29 5 200 ‘

No 65 43 4 002 ‘

96 83 81 77

96 83 82 78

No 65 45 4 002 ‘

No 65 51 6 240 ‘

No 65 64 2 250 ‘

No 66 02 5 160 ‘

96 83 81 79

96 83 81 80

No 102

175 mm

No 108

150 x 6; 175 x 6 mm

No 109

size 6; 100 x 3.4 mm

No 10956

O 35 mm

No 10960

500 g

‘

96 83 81 81

Tool Control System The safety inlay system 96 83 81 83

96 83 81 82

No 10

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 24 x 27; 30 x 32 mm

No 13

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24 mm

No 40

1/4'' a sizes 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm

No 400

1/4''

D 150 mm

No 404

1/4''

D 116 mm

No 405/2

1/4''

D a 54 mm

No 405/6

1/4''

D a 150 mm

No 407

1/4''

D a 38 mm

No 412

1/4''

Designed to fit our Tool Trolleys and Tool Boxes With yellow signal cut-outs to show whether all tools are in their places

‘

10 283

Special automotive tools 1110 TCS

Workshop set for Audi

ö x

No 40

1/4'' a sizes 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm

No 400

1/4''

D 150 mm

No 404

1/4''

D 116 mm

No 405/2 No 405/4

1/4'' 1/4''

D a 54 mm D a 100 mm

No 405/6

1/4''

D a 150 mm

No 407

1/4''

D a 38 mm

No 412

1/4''

No 415

1/4''

No 409

3/8''

D 1/4'' a

No 50

a sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 27; 30; 32 mm

No 52

1/2'' a sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 27; 30; 32 mm

No 54

1/2'' a sizes 5; 6; 7; 8; 10; 12; 14; 17; 19 mm

No 54KK

1/2''

No 54X

‘

210 tools, in TCS inlays (Tool Control System see page 44–59), 7x1/3, 1x2/3 and 4x3/3 inlays for 7 drawers.

‘

Code

R kg

€

22.9

2485.40

‘

97 83 08 00 ‘

‘

96 83 08 75

96 83 87 51

1/2''

‘

No 59X

a sizes M8; M10; M12; M14; M16 3/4'' a size M18

No 1054X/M8 No 3054X/M10 No 3054X/M12 No 3054X/M14

1/2'' 1/2'' 1/2'' 1/2''

a 80 mm a 140 mm a 140 mm a 140 mm

No 54TX

1/2''

a sizes T50; T55; T60

No 509/5

1/2''

D a 130 mm

No 509/10

1/2''

D a 255 mm

No 509W/3

1/2''

D a 75 mm

No 509W/5

1/2''

D a 130 mm

No 509W/10

1/2''

D a 255 mm

No 510

1/2''

D a 71 mm

No 512

1/2''

No 513

3/8''

D 1/2'' a

No 514

3/4''

D 1/2'' a

No 1162 No 1166 No 1167

0.6 x 3.5 mm 1.0 x 5.5 mm 1.2 x 8.0 mm

No 1220–1223

sizes 0; 1; 2; 3

No 1350 No 1356 No 1357 No 1358 No 1359

size M4 size M5 size M6 size M8 size M10

No 1410 No 1411 No 1412 No 1413 No 1414 No 1415 No 1416 No 1417 No 1418 No 1419 No 1420

size T6 size T7 size T8 size T9 size T10 size T15 size T20 size T25 size T27 size T30 size T40

No 4724

size 2 (1.0 x 5.5 x 25 mm)

No 4734

size 2

No 4820

0.6 x 3.5 x 75 mm; 0.8 x 4.0 x 100 mm; 1.0 x 5.5 x 125 mm; 1.2 x 6.5 x 150 mm

‘

96 83 08 80

96 83 01 66 ‘

‘

96 83 08 77

96 83 08 79

‘

96 83 08 78

96 83 08 76

a sizes 5; 6; 7; 8; 10 mm

1/2''

‘

96 83 81 84

96 83 06 22

‘

83 82 03 60

96 83 06 09

No 13

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 27; 30; 32 mm

No 20

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 21; 19 x 22; 24 x 27; 30 x 32 mm

‘

No 24

size 10 x 11 mm ‘

‘

No 25 ‘

284

‘

sizes 7 x 8; 9 x 10; 10 x 11; 12 x 13; 14 x 15; 16 x 18; 17 x 19 mm

‘

No 4830

sizes 1; 2; 3

No 4856

sizes T6; T7; T8; T9; T10; T15; T20; T25; T27; T30

No 10767/9

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

No 10771/8

sizes T9; T10; T15; T20; T25; T27; T30; T40

‘

96 83 06 03

96 83 81 77

96 83 06 07

96 83 07 06

96 83 06 08

96 83 06 04

96 83 06 22

96 83 06 09

‘

No 65 01 5 180 ‘

No 65 29 5 200 ‘

No 65 64 2 250 ‘

No 65 72 6 240 ‘

No 66 02 5 160 ‘

No 102

200 mm

No 103

150 mm

No 105

120 x 10 mm

No 108

150 x 3; 150 x 4; 150 x 5; 150 x 6; 150 x 8 mm

No 10957

O 40 mm

No 10960

500 g

‘

No 12373 ‘

No 12600

500 g

‘

No 12718 ‘

No 12931

No 39 Pkw

400 mm

‘

No 10

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 21 x 24 mm

No 13

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24; 27; 30; 32 mm

No 20

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 21; 19 x 22 mm

No 24

size 10 x 11 mm

No 40

1/4'' a sizes 3; 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm

No 40L

1/4'' a sizes 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13 mm

No 41K

1/4''

No 44K

1/4''

a, E 3; 4; 5; 6; 8 mm

No 44P

1/4''

a, k sizes 1; 2; 3; 4

No 400

1/4''

D 150 mm

No 404

1/4''

D 116 mm

No 405/2 No 405/4

1/4'' 1/4''

D a 54 mm D a 100 mm

No 405/6

1/4''

D a 150 mm

No 407

1/4''

D a 38 mm

No 412

1/4''

No 415

1/4''

No 409

3/8''

D 1/4'' a

No 456

3/8'' a sizes 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22 mm

No 46

3/8''

‘

2500 TCS

ö x

Workshop set for BMW vehicles ‘

285 tools, in TCS inlays (Tool Control System see page 44–59), 7x1/3, 1x2/3 and 4x3/3 inlays for 7 drawers.

‘

Code

R kg

€

23.7

3534.10

‘

97 83 06 00

‘

a, r 0.6 x 3.5; 1.0 x 5.5; 1.2 x 8 mm

‘

96 83 81 92

96 83 06 79 ‘

‘

96 83 06 05

96 83 06 02 ‘

‘

a sizes 10; 11; 12; 13 mm Continuation next page 285

Special automotive tools No 47

3/8'' a sizes 10; 11; 12; 13; 14; 15; 16 mm

No 49 No 1049-9

3/8'' 3/8''

a sizes 5; 6; 7 mm a size 9 mm

No 49X

3/8''

a sizes M6; M8; M10

No 427/3

3/8''

D a 76 mm

No 427/5

3/8''

D a 125 mm

No 427/10

3/8''

D a 240 mm

No 435

3/8''

No 452

3/8''

No 428

3/8''

D a 46 mm

No 431

1/4''

D 3/8'' a

No 432

1/2''

D 3/8'' a

No 52

a sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 27; 30; 32 mm

‘

b size D8

No 736/40

5/16''

No 3115/1

1/4''

No 4856

sizes T6; T7; T8; T9; T10; T15; T20; T25; T27; T30

No 10766

sizes T6; T7

No 10766/9

sizes T8; T9; T10; T15; T20; T25; T27; T30; T40

‘

TORX® controller ‘

‘

No 4628

size 1 (0.4 x 2.5 x 60 mm)

No 4724

size 2 (1.0 x 5.5 x 25 mm)

No 4734 No 4744

size 2 size 1

No 4820

0.6 x 3.5 x 75 mm; 0.8 x 4.0 x 100 mm; 1.2 x 6.5 x 150 mm; 1.6 x 10.0 x 200 mm; 2.0 x 12.0 x 250 mm

No 4830 No 4840

sizes 1; 2; 3 size 1

No 10767/9

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

‘

1/2''

‘

No 54

1/2''

a sizes 8; 10; 12; 14; 17 mm

No 509QR/2

1/2''

D a 52 mm

No 509/5

1/2''

D a 130 mm

No 509QR/10

1/2''

D a 255 mm (2x)

No 506

1/2''

D 300 mm

No 510

1/2''

D a 71 mm

No 512

1/2''

No 513

3/8''

D 1/2'' a

No 514

3/4''

D 1/2'' a

‘

No 2309K

1/2''

‘

a sizes 17; 19 mm

No 12506

sizes 6; 7 mm

No 21TX

sizes E6 x E8; E10 x E12; E14 x E18; E20 x E24

No 40TX

1/4''

No 44KTXB

a sizes T10; T15; T20; T25; T27; T30; T40

No 45TX

3/8''

a sizes E10; E12; E14

No 47TX

3/8''

a sizes E8; E10

No 49TX

3/8''

a size T40

No 50TX

1/2''

a sizes E11; E16; E18; E20; E24

No 54TX No 54TXB

1/2''

‘

No 65 01 5 180 ‘

No 65 29 5 200 ‘

No 65 43 4 002 ‘

No 65 44 4 021 ‘

‘

No 65 45 4 002 ‘

No 65 46 4 021

‘

a sizes E4; E5; E6; E7; E8

1/4''

‘

No 65 64 2 250 ‘

No 65 72 6 240

‘ ‘

‘

a sizes T45; T50; T55; T60 1/2'' a sizes T30; T40; T45; T50

No 66 02 5 160 ‘

No 102

200 mm

No 103

150 mm

No 105

120 x 10 mm

No 108

150 x 3; 150 x 4; 150 x 5; 150 x 6; 150 x 8 mm

No 10957

O 40 mm

No 10960

500 g

‘

No 409M

3/8''

D 1/4'' a

No 415B

1/4''

No 1410 No 1411 No 1412 No 1413 No 1440 No 1441 No 1442 No 1443 No 1444 No 1445 No 1446 No 1427 No 1435

size T6 size T7 size T8 size T9 size T10 size T15 size T20 size T25 size T27 size T30 size T40 size T25 (65 mm) size T55

No PZ1221 No PZ1222 No PZ1223

size 1 size 2 size 3

‘

10 ‘

286

No 12373 ‘

No 12600

500 g

‘

No 12718 ‘

No 12922E ‘

No 12931

No 39 cars

400 mm

‘

No 7756 ‘

2501N TCS

Workshop set for BMW motorbikes

ö xU

No 407

1/4''

D a 38 mm

No 412

1/4''

No 415

1/4''

No 456

a sizes 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22 mm

No 46 No 4600 No 4606

3/8''

No 49

3/8''

a sizes 5; 6; 8 mm

No 425

3/8''

D 165 mm

No 427/3

3/8''

D a 76 mm

No 427/10

3/8''

D a 240 mm

No 428

3/8''

D a 46 mm

No 431

1/4''

D 3/8'' a

No 432

1/2''

D 3/8'' a

No 435

3/8''

No 52

a sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24; 27; 30; 32; 34 mm

No 54

1/2''

a sizes 10; 12 mm

No 506

1/2''

D 300 mm

No 509/5

1/2''

D a 130 mm

No 509/10

1/2''

D a 255 mm

No 510

1/2''

D a 71 mm

No 512

1/2''

No 513

3/8''

D 1/2'' a

No 21TX

sizes E6 x E8; E10 x E12

No 40TX

1/4''

No 44KTXB

a sizes T8; T10; T15; T20; T25; T27; T30; T40

No 45TX

3/8''

a sizes E8; E10; E12; E14

No 49TX No 54TX

3/8''

a sizes T25; T45 a sizes T40; T50; T55; T60

No 1054TX No 2054TX

1/2''

No 10771/8

sizes T9; T10; T15; T20; T25; T27; T30; T40

No 10769

sizes T9; T10; T15; T20; T25; T30; T40; T45; T50

No 4621

size 0 (0.4 x 2.5 x 80 mm); size 1 (0.5 x 3.5 x 90 mm); size 2 (0.6 x 4.0 x 100 mm); size 4 (1.0 x 6.5 x 140 mm); size 5 (1.2 x 8.0 x 160 mm)

No 4631

sizes 1; 2

No 4632

sizes 1; 2; 3

No 4724

size 2 (1.0 x 5.5 x 25 mm)

No 4734

size 2

No 10506

0.8 x 4 x 300 mm

No 10518

1.0 x 5.5 x 410 mm

No 10767/9

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

No 10768

sizes 2.5; 3; 4; 5; 6; 8; 10 mm

No 12507-2K

sizes 8; 10 mm

‘

214 tools, in TCS inlays (Tool Control System see page 44–59), 2x1/3, 2x2/3 and 5x3/3 inlays for 7 drawers.

3/8''

‘

Code

R kg

€

23.3

2563.40

‘

97 83 06 06

‘

a size 20.8 mm-13/16'' a size 16 mm-5/8'' 3/8'' a size 18 mm-11/16'' 3/8''

‘

96 83 20 96

96 83 20 95 ‘

‘

1/2''

‘

96 83 20 98

96 83 21 01

‘

96 83 20 99

96 83 21 00

‘

1/2''

‘

96 83 20 97

a sizes E8; E10

1/4''

96 83 06 22

1/2''

a sizes T50; T55 a sizes T40; T45

‘

96 83 21 02

‘

No 10

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 21 x 22 mm

‘

No 13

sizes 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 23; 24; 27; 29; 30; 32; 34 mm

‘

No 40

a sizes 4; 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13 mm 1/4''

‘

No 44K

1/4''

a, E 3; 4; 5; 6; 8 mm

No 400

1/4''

D 150 mm

No 404

1/4''

D 116 mm

No 405/2 No 405/4

1/4''

‘

D a 54 mm 1/4'' D a 100 mm

‘

Continuation next page 287

Special automotive tools No 65 01 5 180 ‘

No 65 29 5 200 ‘

No 65 34 5 280 ‘

No 65 35 5 200 ‘

No 65 43 4 001 No 65 43 4 002

96 83 81 79

96 83 03 23

96 83 11 68

96 83 02 26

96 83 01 64

96 83 01 65

96 83 01 66

96 83 02 19

‘

No 65 45 4 001 No 65 45 4 002 ‘

No 65 72 6 240 ‘

No 66 02 5 160 ‘

No 102

150 mm

No 103

150 mm

No 105

120 x 10 mm

No 108

150 x 2.5; 150 x 3; 150 x 4; 150 x 5; 150 x 6; 150 x 8 mm

‘

No 10356 ‘

No 10670

285 mm

No 10672

20 x 315 mm

No 10957

O 40 mm

No 10960

300; 500 g

‘

No 12374 ‘

No 12600

500 g

‘

No 12900N ‘

No 12922E ‘

O 6 mm

No 12965 ‘

3026N/1 TCS Tool set for Mercedes-Benz cars

ö x

279 tools, in TCS inlay (Tool Control System see page 44–59), 5x1/3, 5x2/3 and 3x3/3 inlays for 8 drawers. ‘

Code

R kg

€

26.6

3177.05

‘

97 83 00 08 ‘

96 83 02 27

96 83 01 67

No 10

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 21; 19 x 22; 24 x 27; 30 x 32; 34 x 36 mm

No 13

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24 mm

No 20

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 21; 19 x 22; 24 x 27; 30 x 32 mm

No 21

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 21 x 24; 27 x 32; 30 x 34 mm

No 24

sizes 10 x 11; 12 x 14 mm

No 40

1/4'' a sizes 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm

96 83 02 17 ‘

‘

96 83 02 18

96 83 01 63

‘

288

a, r 0.6 x 3.5; 1.0 x 5.5; 1.2 x 8 mm

No 41K

1/4''

No 44K

1/4''

a, E 3; 4; 5; 6; 8 mm

No 44P

1/4''

a, k sizes 1; 2; 3; 4

No 400

1/4''

D 150 mm

No 404

1/4''

D 116 mm

No 405/2

1/4''

D a 54 mm

No 405/6

1/4''

D a 150 mm

No 407

1/4''

D a 38 mm

No 409

3/8''

D 1/4'' a

No 412

1/4''

No 415

1/4''

No 456

3/8'' a sizes 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22 mm

‘

No 1410 No 1411 No 1412 No 1413 No 1440 No 1441 No 1442 No 1443 No 1444 No 1445 No 1446 No 1427

size T6 size T7 size T8 size T9 size T10 size T15 size T20 size T25 size T27 size T30 size T40 size T25 (65 mm)

No PZ1221 No PZ1222 No PZ1223

size 1 (2x) size 2 (2x) size 3

No 3115/1

1/4''

No 4650

sizes T6; T7; T8; T9; T10; T15; T20; T25; T27; T30

No 10766

sizes T6; T7

No 10771/8

sizes T9; T10; T15; T20; T25; T27; T30; T40

‘

No 427/3

3/8''

D a 76 mm

No 427/5

3/8''

D a 125 mm

No 427/10

3/8''

D a 240 mm

No 428

3/8''

D a 46 mm

No 431

1/4''

D 3/8'' a

No 432

1/2''

D 3/8'' a

No 435

3/8''

No 50

a sizes 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 30 mm

No 52

1/2'' a sizes 12; 17; 18; 19; 20; 21; 22; 24; 25; 27; 30; 32 mm

No 509/2

1/2''

D a 52 mm

‘

No 509/5

1/2''

D a 130 mm

‘

No 509/10

1/2''

D a 255 mm

No 510

1/2''

D a 71 mm

‘

TORX® controller ‘

No 4620

size 1 (0.6 x 3.5 x 75 mm); size 2 (0.8 x 4.0 x 100 mm); size 4 (1.2 x 6.5 x 150 mm); size 5 (1.6 x 8.0 x 175 mm); size 6 (1.6 x 10.0 x 200 mm); size 7 (2.0 x 12.0 x 250 mm)

No 4628

size 1 (0.4 x 2.5 x 60 mm)

No 4630

size 1; 2; 3

No 4632

size 4

No 4640

sizes 0; 1; 2

No 4660 VDE

size 1 (0.4 x 2.5 x 75 mm)

No 4724

size 2 (1.0 x 5.5 x 25 mm)

No 4734 No 4744

size 2 size 1

No 10767/9

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

1/2''

‘

No 512

1/2''

No 513

3/8''

D 1/2'' a

‘

D 1/2'' a

No 514

3/4''

No 54

1/2'' a sizes 5; 6; 7; 8; 10; 12; 14; 17; 19 mm

No 55

3/4''

a size 36 mm

No 2309K

1/2''

a sizes 17; 19 mm

No 12506

sizes 6; 7 mm

No 21TX

sizes E6 x E8; E10 x E12; E14 x E18; E20 x E24

No 40TX

1/4''

No 44KTXB

a sizes T10; T15; T20; T25; T27; T30; T40

‘

No 65 01 5 180

‘

No 65 29 5 200 ‘

‘

No 65 51 6 240 ‘

‘

No 65 64 2 175 ‘

No 66 02 5 160

‘

a sizes E4; E5; E6; E7; E8

‘

3/8''

a sizes E10; E12; E14

No 47TX

3/8''

a sizes E8; E10

No 49TX

3/8''

a size T40

No 49X

3/8''

a sizes M6; M8; M10

No 50TX

1/2''

a sizes E11; E16; E18; E20; E24

No 54TX No 54TXB

1/2''

‘

a sizes T45; T50; T55; T60 1/2'' a sizes T30; T40; T45; T50

No 409M

3/8''

D 1/4'' a

No 415SGB

1/4''

‘

200 mm

No 103

150 mm

No 105

120 x 10 mm

No 108

150 x 3; 150 x 4; 150 x 5; 150 x 6; 150 x 8; 200 x 8 mm

No 10672

20 x 315; 25 x 365 mm

No 10957

O 40 mm

No 10960

500; 800 g

‘

No 45TX

No 102 ‘

1/4''

‘

No 12377 ‘

No 12600

3000 g

‘

No 12718 ‘

289

Special automotive tools 3022N/1 TCS Tool set for Mercedes-Benz HGVs

ö x

308 tools, in TCS inlay (Tool Control System see page 44–59), 6x1/3, 2x2/3 and 7x3/3 inlays for 11 drawers. ‘

Code

R kg

€

47.3

4120.50

‘

97 83 00 09 ‘

96 83 01 65

96 83 01 67

96 83 01 66

96 83 02 17 96 83 02 20

No 10

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 21; 19 x 22; 24 x 27; 30 x 32; 34 x 36 mm

No 13

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24; 27; 30; 32; 34 mm

No 14

size 24 mm

No 20

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 21; 19 x 22; 24 x 27; 30 x 32 mm

No 21

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 21 x 24; 27 x 32; 30 x 34 mm

No 24

sizes 10 x 11; 12 x 14 mm

No 40

1/4'' a sizes 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm

No 41K

1/4''

No 44K

1/4''

a, E 3; 4; 5; 6; 8 mm

No 44P

1/4''

a, k sizes 1; 2; 3; 4

No 400

1/4''

D 150 mm

No 404

1/4''

D 116 mm

No 405/2

1/4''

D a 54 mm

No 405/6

1/4''

D a 150 mm

No 407

1/4''

D a 38 mm

No 409

3/8''

D 1/4'' a

No 412

1/4''

No 415

1/4''

No 456

a sizes 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22 mm

No 427/3

3/8''

D a 76 mm

No 427/5

3/8''

D a 125 mm

No 427/10

3/8''

D a 240 mm

No 428

3/8''

D a 46 mm

No 431

1/4''

D 3/8'' a

No 432

1/2''

D 3/8'' a

No 435

3/8''

No 50

a sizes 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 30 mm

‘

96 83 02 18

96 83 01 72 ‘

‘

96 83 02 25

96 83 81 79

‘

a, r 0.6 x 3.5; 1.0 x 5.5; 1.2 x 8 mm

‘

96 83 02 22

96 83 03 24 ‘

‘

96 83 02 21

96 83 11 79 ‘

‘

3/8''

‘

96 83 01 77

96 83 01 78

‘

290

1/2''

No 52

1/2'' a sizes 12; 17; 18; 19; 20; 21; 22; 24; 25; 27; 30; 32 mm 1/2''

D 397 mm

No 506

1/2''

D 300 mm

No 509/2

1/2''

D a 52 mm

No 509/5

1/2''

D a 130 mm

No 509/10

1/2''

D a 255 mm (2 x)

No 510

1/2''

D a 71 mm

‘

No 512

1/2''

No 54

a sizes 5; 6; 7; 8; 10; 12; 14; 17; 19 mm

‘

1/2''

‘

a sizes 24; 27 mm

‘

No 21TX

sizes E6 x E8; E10 x E12; E14 x E18; E20 x E24

‘

No 40TX

1/4''

No 44KTXB

a sizes T10; T15; T20; T25; T27; T30; T40

No 45TX

3/8''

a sizes E10; E12; E14

No 49TX

3/8''

a size T40

No 49X

3/8''

a sizes M6; M8; M10

No 50TX

1/2''

a sizes E11; E16; E18; E20; E24

No 54TX No 54TXB

1/2''

a sizes T45; T50; T55; T60 a sizes T30; T40; T45; T50

‘

size 1 (0.4 x 2.5 x 60 mm)

No 4630

sizes 1; 2; 3

No 4632

size 4

No 4640

sizes 0; 1; 2

No 4660 VDE

size 1 (0.4 x 2.5 x 75 mm)

No 4724

size 2 (1.0 x 5.5 x 25 mm)

No 4734 No 4744

size 2 size 1

No 10760CV

sizes 12; 14; 17; 19; 22 mm

No 10767/9

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

‘

a sizes E4; E5; E6; E7; E8

1/4''

No 4628

‘

1/2''

‘

size 1 (0.6 x 3.5 x 75 mm); size 2 (0.8 x 4.0 x 100 mm); size 4 (1.2 x 6.5 x 150 mm); size 5 (1.6 x 8.0 x 175 mm); size 6 (1.6 x 10.0 x 200 mm); size 7 (2.0 x 12.0 x 200 mm)

‘

No 2309 No 2309K ‘

No 4620

D 3/4'' a

‘

1/2''

a size 22 mm 1/2'' a sizes 17; 19 mm

1/2''

‘

No 51IMP ‘

510 mm

No 568 ‘

No 504/15 ‘

No 558 ‘

‘

No 65 01 5 180

‘ ‘

‘

1/2''

‘

No 65 29 5 200 ‘

No 65 51 6 240 ‘

No 66 02 5 160 ‘

No 102

200; 300 mm

No 103

175 mm

No 105

120 x 12 mm

No 108

150 x 3; 150 x 4; 150 x 5; 150 x 6; 150 x 8 mm

No 10957

O 50 mm

No 10960

500; 800; 1000 g

No 11006 No 11007

400 mm 400 mm

No 12025

210 mm

No 12036

260 mm

‘

No 409M

3/8''

D 1/4'' a

No 415SGB

1/4''

No 1410 No 1411 No 1412 No 1413 No 1440 No 1441 No 1442 No 1443 No 1444 No 1445 No 1446 No 1427

size T6 size T7 size T8 size T9 size T10 size T15 size T20 size T25 size T27 size T30 size T40 size T25 (65 mm)

No PZ1221 No PZ1222 No PZ1223

size 1 (2x) size 2 (2x) size 3

No 3115/1

1/4''

No 4650

sizes T6; T7; T8; T9; T10; T15; T20; T25; T27; T30

No 10766

sizes T6; T7

No 10771/8

sizes T9; T10; T15; T20; T25; T27; T30; T40

‘

No 12374 ‘

No 12600 No 12718 ‘

No 12931

‘

3000 g

‘

TORX® controller ‘

No 55

3/4'' a sizes 22; 24; 27; 30; 32; 34; 36; 38; 41; 46; 50 mm

No 552

3/4''

No 556

3/4''

No 559/8 No 559/16

3/4''

D a 200 mm D a 400 mm

‘

3/4''

10 291

Special automotive tools 1100 TCS

Tool set for Porsche

ö x

No 407

1/4''

D a 38 mm

No 409M

3/8''

D 1/4'' a

No 415

1/4''

No 45

a sizes 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19 mm

No 46

3/8''

a size 20.8 mm-13/16''

No 49

3/8''

a sizes 4; 5; 6; 7; 8; 10 mm

No 425

3/8''

D 165 mm

No 427/3

3/8''

D a 76 mm

No 427/10

3/8''

D a 240 mm

No 428

3/8''

D a 46 mm

No 432M

1/2''

D 3/8'' a

No 435

3/8''

No 50

a sizes 19; 21; 22; 24; 27; 30; 32 mm

No 52

1/2'' a sizes 16; 17; 18; 19; 22; 24; 27; 30; 32 mm

No 54

1/2''

a sizes 6; 7; 8; 10 mm

No 54X

1/2''

a sizes M6; 8; 12; 14

No 506

1/2''

D 300 mm

No 509/5

1/2''

D a 130 mm

No 509/10

1/2''

D a 255 mm

No 510

1/2''

D a 71 mm

No 512

1/2''

No 514M

3/4''

D 1/2'' a

No 21TX

sizes E6 x E8; E10 x E12; E14 x E18; E20 x E24

No 40TX No 45TX

1/4'' 3/8''

a sizes E4; E5; E6; E7; E8 a sizes E10; E12; E14

No 50TX

1/2''

a sizes E11; E16; E18; E20; E24

No 54TX

1/2''

a sizes T45; T50; T55; T60

No 1410 No 1411 No 1412 No 1413 No 1440 No 1441 No 1442 No 1443 No 1444 No 1445 No 1446 No 1427

size T6 size T7 size T8 size T9 size T10 size T15 size T20 size T25 size T27 size T30 size T40 size T25 (65 mm)

‘

228 tools, in TCS inlays (Tool Control System see page 44–59), 1x1/3, 1x2/3 and 5x3/3 inlays for 6 drawers.

‘

3/8''

‘ ‘

Code

R kg

€

24.7

2791.50

‘

97 83 04 11

‘

96 83 01 92

96 83 01 93

‘

1/2''

‘

96 83 01 94

96 83 01 98

‘

96 83 11 96

‘

96 83 01 97

‘

96 83 01 95

No 12

sizes 5.5; 12; 14 mm (2x)

No 13

sizes 7; 11 mm (2x); sizes 6; 8; 9; 10; 12; 13; 14; 15; 16; 17; 18; 19; 20; 22; 24; 30; 32; 36 mm (1x)

No 14

size 17 mm

No 20

sizes 10 x 11; 12 x 13; 14 x 15; 17 x 19; 19 x 22 mm

‘

No 23

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 21 x 23; 24 x 27; 30 x 32 mm

1/4''

No 4650

sizes T6; T7; T8; T9; T10; T15; T20; T25; T27; T30

No 10766/9

sizes T8; T9; T10; T15; T20; T25; T27; T30; T40

No 4622

size 1 (1.0 x 5.5 x 100 mm); size 2 (1.2 x 6.5 x 125 mm); size 4 (1.6 x 10.0 x 175 mm); size 5 (2.0 x 12.0 x 200 mm)

No 4630

size 1

No 4632

size 3

No 4724

size 2 (1.0 x 5.5 x 25 mm)

No 4734

size 2

No 10760CV/9

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

‘

No 24

sizes 8 x 10; 11 x 13; 12 x 14; 17 x 19; 22 x 24 mm

No 29

sizes 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22 mm

No 40

1/4'' a sizes 3.5; 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13 mm

No 415SGB ‘

‘

‘ ‘

‘

No 44

1/4''

‘

No 400

1/4''

D 150 mm

No 404

1/4''

D 116 mm

No 405/6

1/4''

D a 150 mm

‘

a sizes 3; 4; 5; 6 mm

‘

292

No 65 01 6 180 ‘

No 65 43 4 002 ‘

No 65 45 4 002 ‘

No 65 46 4 021 ‘

96 83 02 55

No 65 51 6 240 ‘

96 83 02 57

No 10

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 21; 19 x 22; 24 x 27; 30 x 32 mm

No 13

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24 mm

No 20

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 21 x 23; 24 x 26; 25 x 28; 27 x 32 mm

No 46

3/8''

a size 20.8 mm-13/16''

No 422

3/8''

No 50

1/2''

a sizes 8; 9; 19; 30 mm

No 51

1/2''

a size 27 mm

No 52

a sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 27; 30; 32 mm

No 54

1/2''

a sizes 12; 17 mm

No 1054/8K No 1054/10

1/2'' 1/2''

a 120 mm a 140 mm

No 2054X/M10 No 3054X/M12

1/2'' 1/2''

a 110 mm a 140 mm

No 509/5

1/2''

D a 130 mm

No 509/10

1/2''

D a 255 mm

No 509W/2

1/2''

D a 52 mm

No 509W/5

1/2''

D a 130 mm

No 510

1/2''

D a 71 mm

No 512

1/2''

No 4724

size 2 (1 x 5.5 x 25 mm)

No 4734

size 2

No 4820

0.6 x 3.5 x 75 mm; 0.8 x 4.0 x 100 mm; 1.0 x 5.5 x 125 mm; 1.2 x 6.5 x 150 mm; 1.6 x 8.0 x 175 mm

No 4830

sizes 1; 2; 3

No 10767/9

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

No 66 02 6 160 ‘ ‘

No 100

150 mm

No 103

150 mm

No 104

120 x 4; 120 x 6 mm

No 105

120 x 12 mm

No 108

150 x 4 mm

‘

No 10670

265 mm

‘ ‘

No 10940 ‘

O 55 mm

No 10955

O 35 mm

No 10960

300; 500 g

‘

1/2''

‘

No 11095/20

20 blades 0.05–1 mm

‘

No 12005

‘

No 12036

260 mm

‘ ‘

No 12321 ‘ ‘

‘

No 12905 ‘

‘

No 12931

‘

1000 TCS

Tool set for Volkswagen

‘

ö x

‘

109 tools, in TCS inlays (Tool Control System see page 44–59), 2x1/3, 2x2/3 and 2x3/3 inlays for 4 drawers. ‘

Code

R kg

€

‘

15.1

1375.65

‘

97 83 02 00

1 of each

‘

No 65 29 6 160 ‘

No 65 70 6 250 ‘

96 83 03 53

96 83 02 58

No 66 00 6 180 ‘

No 102

125 mm

No 104

120 x 2 mm

No 105

100 x 10 mm

No 108

115 x 2; 150 x 2.5; 150 x 6; 200 x 8 mm

‘

No 1023 ‘

No 10957

O 35 mm

No 10960

500 g

‘

96 83 03 51

96 83 02 56

No 12717 ‘

No 12718 ‘

293

Special automotive tools 54TX-T20

Special tools for cars

Screwdriver Bit ®

for inside TORX screws, size T20, 1/2'' a-drive, use on mounting screws for choke-switch on choke-flap L-Jetronic.

! Special tools for carburettors

‘

r Screwdriver

10503

Code

for adjusting slotted screws, matt chrome, black tip.

Type

R g

BMW

‘

03 10 00 20 ‘

540-22

‘

Code

L mm

Blade mm

R g

€

365

0.8 x 5.0 x 260

100

7.75

‘

73 21 01 01

€ 10.60

CROW-FOOT spanner

size 22 mm, a-drive, on through-flow jet of 2B4-carburettor, for use with adaptor No 513. 3/8''

‘

r Screwdriver

10506

‘

Code

for setting correct CO-valve on mixture screen, idling mixture on Pierburg carburettors: BMW, Ford, Opel, Peugeot, Renault, Mercedes-Benz cars. Choke adjustment Audi 80, VW Passat 1.3-1.5; 1.6 l, matt chrome, black tip.

02 20 00 22

73 01 00 01

BMW: series 3, 518, 520

Type

R g

BMW: series 3, 518, 520

Type

R g

BMW: M 21: E30 = 324td, E28 = 524td, E34 = 524td, M 51: E36 = 325td, E34 = 525tds

255

Type

R g

Citroën: all diesel VW/Audi: Audi 80 L, CL, GL, CD, Golf, Jetta, Caddy, Passat

Type

R g

Mercedes-Benz

294

513

‘

L mm

Blade mm

R g

€

350

0.8 x 4.0 x 300

10.80

‘

R g

€ 39.30

‘

1/2''

Code

Type

‘

socket x

Adaptor 3/8''

plug.

‘ ‘

10507N KK

i Screwdriver

Code ‘

for hexagon socket head screws, size 3 mm, for mixture regulation on distributor of K-Jetronic: VW-Audi, Mercedes-Benz, Porsche 924, Ford and BMW, matt chrome, black tip. ‘

Code

L mm

R g

385

‘

73 10 10 03

€ 11.20

13 03 00 02

1062

Socket

bi-hexagon, AS-drive, size 27 mm, 1/2'' a-drive, for diesel injectors. ‘

Code

r Screwdriver

‘

03 83 00 27

for adjustment (slotted screws), matt chrome, black tip.

1023 L mm

Blade mm

R g

€

525

1.0 x 5.5 x 410

159

10.10

‘

73 21 01 02 ‘

11085

€

43.50

‘

Code

9.30

‘

10518

€

Jet reamers

Special ring spanner

single ended, angled, size 13 mm, use on mounting screws of injection pump.

‘

16 pieces in case, with holder.

Code ‘

41 11 00 13

€

14.70

‘

Code

R g

measuring range mm

‘

74 31 00 01

0.33–2.0

€

35.10

‘

12504

51-27

Socket

extra deep, bi-hexagon, size 27 mm, 1/2'' a-drive, for injection nozzles on diesel car engines.

Bit holder with inside hexagon

for all screwdriver bits, flexible shaft, for adjustment.

‘

Code ‘

03 02 00 27

‘

Code

inside a ''

Blade mm

R g

€

260

1/4

150

168

16.30

‘

18 10 10 16 ‘

294

‘

L mm

€ 20.90

!? 51-30

Socket

11066

size 30 mm, for injectors.

Valve spring lifters

bright nickel-plated.

‘

Code

Type

R g

Mercedes-Benz

341

‘

03 02 00 30

€ 21.20

‘

3000

Socket ‘

multi-spline, 1.5 x 58 mm, 1/2'' a-drive, for use on pre-chamber with indirect injection.

Code

size

Clamp. width mm

Jaws (2 pieces)

‘

74 12 20 01 74 12 20 03

1 2N

75–225 120–280

R g S

11066R/1 1200 1 11066R/3 + R/4 3214 1

€ 67.00 128.00

‘ ‘

Code

Type

R g

€

Mercedes-Benz diesel

185

40.40

‘

03 39 00 01 ‘

3505

11066R

Spare jaws

for No 11066, 2 each, hardened, nickel-plated.

Special extension ‘

Code

size

shape

for No

R g

1 2 3 4

straight bent straight bent

11066/1 11066/1 11066/2 11066/2

120 120 103 114

1 1 1 1

‘

Code

R g

186

‘

13 21 00 01

€

79 12 01 01 79 12 01 02 79 12 02 01 79 12 02 02 ‘

21.90

11068

‘

1054-13

€ 13.70 13.70 13.70 13.70

Piston ring compressors

made of spring steel, stepless adjustment c/w hexagon key wrench.

INHEX socket

for hexagon socket head screws, size 13 mm, length, 70 mm, 1/2'' a-drive, for use on brass air-cooled injector nozzles.

‘

size

Clamp. width mm

Height mm

R g

0 1 1) 2 3

40–75 57–125 90–175 90–175

50 80 80 165

105 230 270 603

1 1 1 1

‘

Code

Type

R g

VW/Audi: for engines with fuel injection

130

‘

03 15 07 13

€ 23.60

‘

Code ‘

74 14 00 00 74 14 00 01 74 14 00 03 74 14 00 05

€ 17.50 27.70 37.50 69.50

‘

) Fiat-No A 60 605 (Type 126, 127, 128, X 1/9, 130, 131, 132, 850T, 238)

‘

11069

Special tools for valves and pistons

11063

Piston ring pliers

for mounting and removing piston rings, bright nickel-plated. 1–3

Valve seating-ring pliers

for pulling valve stem seals and removal of valve spring base on VW-Audi engines with overhead camshaft i.e. Golf, Passat, Audi 80, Audi 100, BMW and Mercedes-Benz, bright nickel-plated.

‘

size

for piston rings mm

L mm

R g

1 1) 2 3 5 2)

50–100 80–120 110–160 60–160

200 240 240 220

245 279 394 194

1 1 1 1

‘

Code

L mm

R g

250

340

‘

74 29 00 01

€ 39.40

‘

11063/1

Valve seating-ring pliers

Code ‘

74 15 20 01 74 15 20 02 74 15 20 03 74 15 20 05

€ 26.20 28.10 31.40 33.10

‘

) Fiat-No A 60 182 (Type 126, 127, 133, 850T) ) with V-shaped contact faces for safe and positive manipulation of piston rings

for extracting poorly accessible valve shaft seals, e.g. in four-valve engines. Joint and jaws made of gun-finished hardened sheet steel. Handles made of nickel-plated shaped sheet steel.

‘

Code

L mm

R g

270

330

‘

74 29 00 02

€ 45.60

‘

295

Special automotive tools 11095–11097 Precision feeler gauges

732/10-10

DIN 2275, DIN EN 10140, nickel-plated case, tapered blades.

Ring insert tool

size 10 mm, valve adjustment, tightening torque 8–12 N m.

‘

Code

‘

Code

L R mm g S

Sizes

‘

74 24 00 01 11095/13 0.05; 0.10; 0.15; 0.20; 0.25; 0.30; 0.40; 0.50; 0.60; 0.70; 0.80; 0.90; 1.00 mm 74 24 00 02 11095/20 0.05; 0.10; 0.15; 0.20; 0.25; 0.30; 0.35; 0.40; 0.45; 0.50; 0.55; 0.60; 0.65; 0.70; 0.75; 0.80; 0.85; 0.90; 0.95; 1.00 mm 74 24 00 05 11097/26 1 1/2; 2; 2 1/2; 3; 4; 5; 6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 23; 24; 25/1000''

Type

R g

BMW: all except Diesel

Type

R g

Mercedes-Benz

150

Type

R g

Mercedes-Benz

142

Type

R g

Mercedes-Benz

160

‘

€

58 22 10 10 ‘

1054-10 100 61

6.25

100 95

9.60

€ 28.00

INHEX socket

for hexagon socket head screws, size 10 mm, length 140 mm, 1/2'' a-drive, for cylinder head bolts. ‘

100 80

10 11.70

‘

Code ‘

03 15 14 10

€ 10.80

‘

12108

Valve spring tool 3054X-M10

incorporating 2 clamping and 2 compression facilities which are interchangeable, suitable for most car engines, some without removing cylinder head.

Screwdriver BIT

for tri-square socket head screws (XZN), size M10, length 140 mm, 1/2'' a-drive, for cylinder head bolts and drive shaft bolts.

‘

R g

Code ‘

‘

€

Code ‘

74 57 00 01

780

85.50

‘

03 26 14 10

€ 15.50

‘

12705

Motor mechanics stethoscope

3054X-M12

steel probe, plastic handle and sound tubes.

Screwdriver BIT

size M 12, for cylinder head bolts, with tri-square socket head M 12. ‘

Code

‘

Code

R g

137

‘

74 06 00 01

‘

€

03 26 14 12 ‘

61.00

‘

3004 12731

€ 14.00

Valve grinding tools

Screwdriver BIT

for tri-square socket head screws (XZN), size M12, length 55 mm, 1/2'' a-drive, for cylinder head bolts.

with suction cap. ‘

Code

O mm

R g

20 25 30 37

58 54 66 65

5 5 5 5

‘

74 05 00 20 74 05 00 25 74 05 00 30 74 05 00 37

€ 4.55 4.55 4.70 5.20

‘

40-3

‘

Code

Type

R g

Mercedes-Benz

‘

03 23 00 12

21.10

‘

54CV/9

Socket

hexagon, size 3 mm, 1/4'' a-drive, for releasing and tightening screws on the expansion valve.

€

Set: Screwdriver sockets

for spline socket head screws (Ribe CV), for brakes and cylinders head bolts. Content: M5; M6; M7; M8; M9; M10; M12; M13; M14

‘

Code

Type

R g

‘

01 01 00 03

‘

BMW: X6 model E71, 7 Series model F01/F02

€ ‘

4.70

Code

Type

R g

1420

‘

96 03 09 01 ‘

296

Fiat, Alfa

€ 127.90

?§ 54CV

Screwdriver sockets

513 1/2''

for spline socket head screws (Ribe CV), length 60 mm, 1/2'' a-drive, for brakes and cylinder head bolts.

socket x

Adaptor 3/8''

plug.

‘

Type

R g

BMW: series 3, 518, 520

Type

R g

€

BMW

3.00

Type

R g

Mercedes-Benz

142

Type

R g

Mercedes-Benz

365

‘

Code

size

Type

R g

M7 M8 M9 M10 M12 M13 M14 M16

Fiat Fiat Fiat (1.2 l; 8V/16V) Fiat (1.2 l; 8V/16V) Fiat (2.0 l) Fiat, Alfa (e.g. 1.6 l; 16V) Alfa (e. g. 1.6 l; 16V) Alfa (e. g.1.6 l; 16V)

78 78 92 95 119 123 126 163

‘

Code S 5 5 5 5 5 5 5 5

€

‘

13 03 00 02

€ 9.30

‘

03 09 00 07 03 09 00 08 03 09 00 09 03 09 00 10 03 09 00 12 03 09 00 13 03 09 00 14 03 09 00 16 1

12.60 9.90 13.80 11.10 11.60 16.30 13.60 14.80

‘

1417

BIT

for inside TORX screws, size T25; 1/4'' E-drive, for screws on sun roof E30. ®

‘

Code ‘

08 13 00 25 ‘

tools for chassies and § Special steering 40TX-E8

3054X-M10

Screwdriver BIT

for tri-square socket head screws (XZN), size M10, on drive shaft bolts.

Socket

for external TORX® screws, size E 8, 1/4'' a-drive, for steering lock screws.

‘

Code ‘

03 26 14 10

€ 15.50

‘

Code

Type

R g

€

BMW

5.70

‘

01 27 00 08 ‘

24-17x19

11060-3

Internal puller

capacity 27–36 mm, for taper roller bearing outer ring on steering housing, to be used with counter stay No 11061-2.

OPEN-RING spanner ‘

bi-hexagon, size 17 x 19 mm, use on wingpump manifold (hydro-steering).

Code ‘

71 16 00 13

€ 54.00

‘

Code

R g

Type

‘

41 08 17 19

BMW

151

€

18.10

‘

55-36

11061-2

Counter stay with reduction unit

for taper roller bearing outer ring on steering housing.

Socket

hexagon, size 36 mm, 3/4'' a-drive, use on vibration damper.

‘

Code

R g

1500

Type

R g

€

Fiat: 1500, 125

112

15.30

Type

R g

€

VW/Audi

533

Type

‘

71 17 00 12

Mercedes-Benz

€ 66.50

‘

Code

R g

Type

‘

05 01 00 36

BMW: series 5, 6 and 7, except 518-520i

386

S 2

€ 17.10

‘

540-22

CROW-FOOT spanner

46-19

Socket

Fiat-No A 57 052 extra deep, bi-hexagon, size 19 mm, 3/8'' a-drive, for front mounting screw of top steering link on front wheel suspension. ‘

size 22 mm, 3/8'' a-drive, use on track-rods.

Code ‘

02 02 00 19 ‘

12495

‘

Code

Type

R g

BMW: series 3, 518, 520

‘

02 20 00 22 ‘

€ 39.30

Brass punch

Ø 20 mm, length 200 mm, for use on bushes bearing rings, steering pivot pin. ‘

Code ‘

77 13 00 00

19.90

‘

297

Special automotive tools

Special tools for ignition and electrics

3466

1/2''

Spark plug socket

a-drive, with rubber insert

‘

a-drive, with magnet, outside dia 25.5 mm, for deep seated plugs.

3/8''

Code

‘

L mm

R g

€

16-5/8 20.8-13/16

83 83

137 194

10 10

17.80 19.80

‘

A mm/''

L mm

R g

16-5/8

198

‘

02 14 00 36

A mm/''

‘

03 02 02 16 03 02 02 08

Code

Spark plug sockets

€

51S

30.00

Spark plug socket

‘

1/2''

4600 3/8''

a-drive, with rubber insert

Spark plug socket

a-drive, with rubber insert.

‘

Code

A mm/''

L mm

R g

€

20.8-13/16

196

21.20

R g

‘

03 24 02 08

‘

Code

A mm/''

L mm

R g

€

16-5/8

14.40

‘

02 12 00 36

‘

5100

Rubber insert

‘

4606 3/8''

for size 20.8 mm (No 46; 51; 51S).

Spark plug socket

a-drive, with rubber insert. ‘

Code ‘

€

‘

Code

A mm/''

L mm

R g

€

18-11/16

132

14.60

‘

02 13 00 18

09 01 00 01 ‘

10626

‘

1042 3/8''

1.15

Spark plug connector pliers

forged, with 45° offset, curved jaws, for extracting and replacing sparkplug connectors.

Tubular spark plug socket

a-drive.

‘

Code

A mm/''

L mm

R g

16-5/8

270

203

‘

02 23 00 16

‘

€ 21.60

Code 76 53 00 01

‘

L mm

R g

195

223

‘

€ 32.30

‘

1043

Tubular spark plug sockets

a-drive, extra long, with rubber insert, for deeply recessed, difficult-to-reach spark-plugs with M12 x 1.25 mm threads. Citroën: C5 with engine 2.0 l HPI Peugeot: 406 HPI Renault: Twingo, Clio, Kangoo with engine 1.2 l, 16V

3/8''

‘

Code

A mm

L mm

R g

1043 1043/1

14 14

90 250

52 144

1 1

‘

02 23 00 14 02 23 10 14

€ 15.70 19.70

‘

46 3/8''

Spark plug socket 12375

a-drive, with rubber insert.

Spark plug brush

wood, brass wire dia 0.15 mm. ‘

Code

A mm/''

L mm

R g

‘

02 02 02 08 ‘

20.8-13/16

151

‘

S 10

€ 15.00

Code 74 16 00 01 ‘

10 298

L mm

Rows

R g

€

150

3x5

1.60

‘

% 7756

Tools for heater plugs 25GK

Ratchet ring spanner

angled, extra long, for hard-to-reach heater plugs (e.g. BMW, MercedesBenz, Peugeot, Renault, Seat, VW/Audi), size 8 mm for contact rail bolts, size 12 mm for diesel heater plugs, chrome plated. ‘

Code

A mm

L mm

R g

8 x 12

255

156

‘

41 18 08 12

€

Automotive voltage tester (complete set)

Testing unit for electric and electronic car components, 3–48 volt, 2 LEDs to indicate voltage and plus or minus pole, complete in Pc-bag. Content: 1 basic unit with 1.5 m cable, testing tip, integrated mechanical sliding needle, 1 crocodile terminal, 1 jaw clamp

44.80

‘ ‘

3047

Spark plug sockets

Code

R g

‘

77 56 00 01

extra long, for hard-to-reach heater plugs, 3/8'' a-drive, size 10 mm e.g. for Renault, VW/Audi TDi; size 12 mm e.g. for BMW, Mercedes-Benz (201, 202 four-valve technology), Ford, Opel, Renault.

€ 48.80

‘

7755

Crocodile terminal

‘

Code

A mm

L mm

R g

10 12

140 140

138 138

1 1

‘

02 18 00 10 02 18 00 12

‘

€ 36.80 36.80

‘

Code ‘

77 55 00 01

€ 7.85

‘

10627

Heater plug socket pliers

forged, curved jaws with milled grip, for accessing tight-fitting, awkwardto-reach heater plug connectors (e.g. BMW, Mercedes-Benz, Peugeot, Renault, Seat, VW/Audi). ‘

L mm

R g

220

262

Type

R g

€

BMW: 324d; 524d

13.20

Code ‘

76 53 00 04

€ 51.50

‘

46-12

Socket

extra deep, bi-hexagon, size 12 mm, 3/8'' a-drive, use on glow plugs of diesel engines. ‘

Code ‘

02 02 00 12 ‘

Testing tools for car electrics 12905

Car circuit tester

for car electrics 6–12 volt and 24 volt, with pointed probe, cover cap, connecting lead with alligator clip.

‘

Code

L mm

R g

€

120

7.40

‘

77 38 00 01 ‘

10 299

Special automotive tools

e Socket

51S

Special tools for brakes and wheels

P Q

extra deep, DIN 3124/ISO 2725-1, E DIN EN 3710, E DIN EN 3709 (test loads), HPQ high performance steel, chrome plated.

ES 721/15/3/2

‘

530 x 350 x 40 mm, 6 pieces

Code

A mm/''

d1 d2 d3 L t1 t2 mm mm mm mm mm mm

R g

‘

€

‘

03 24 02 08 20.8-13/16 1) 27.7 26 20 83 22 66.2 196

R g

Code

€

‘

96 83 81 72

5012

529.90

‘

1/2''

) with rubber insert for spark plugs and for tightening and untightening wheel nuts on Japanese cars

‘

No 721/15

30–150 N m

No 35c cars

17; 19; 22; D 1/2''

No 10599/2

245 mm

c IMPACT sockets

2309

a-drive, for power drivers, extra deep, with reduced outside diameter, Chrome Alloy Steel, gunmetal finish.

1/2''

‘

a sizes 17; 19; 20.8 mm-13/16''

No 2309K ‘

10 21.20

‘

83 81 20 87

Empty tray

299

22.30

‘

Wheel braces

Code

DIN 3119/ISO 6788, forged centre section, pressed-in extension arms with extra deep forged socket heads, Chrome Alloy Steel, chrome plated.

A mm

d1 mm

d2 mm

L mm

t mm

R g

17 19 20.8 22

25.7 28.2 30.7 32

30 30 30 30

85 85 85 85

68 67.5 66.5 66.5

242 257 272 311

5 5 5 5

‘

23 09 00 17 23 09 00 19 23 09 02 08 23 09 00 22

€ 25.90 25.90 29.00 29.00

‘

for wheel nuts ‘

c Wheel nut sockets

2309K

with plastic sleeve. Sleeve extension protects not only wheel bolts and nuts but also the wheel and holes. ‘

Code

A mm/''

L mm

R g

35c cars 34c HGVs

17; 19; 22; D 1/2'' 400 24; 27; 32; D 3/4'' 700

2058 5053

1 1

‘

43 03 00 06 43 03 00 05 ‘

‘

€ 90.50 140.00

Code

A mm

a ''

L mm

O mm

R g

17 19 20.8

1/2 1/2 1/2

87 87 87

32 32 32

242 250 265

1 1 1

‘

23 09 10 17 23 09 10 19 23 09 12 08

€ 32.70 34.30 34.00

‘

Tyre levers 10599/2

Handy, sturdy construction, purposefully shaped, Chrome Alloy Steel.

Balance weight pliers

registered design, with cutter for cutting and trimming lead weights (with or without adhesive foil), Chrome Vanadium, chrome plated.

‘

Code

L mm

R g

39 cars 39/1 HGVs 39/2 HGVs 39/3 HGVs

400 600 600 600

383 897 1172 915

5 5 5 5

‘

74 01 04 00 74 01 06 00 74 01 06 02 74 01 06 03 ‘

10 300

€ 23.60 35.10 27.60 23.70

‘

Code

L mm

R g

245

319

‘

76 29 40 03 ‘

€ 51.00

& 10613

Brake spring pliers

1049-9

INHEX socket

for hexagon socket head screws, size 9 mm, 3/8'' a-drive, for brake calliper retainers.

for rivetted brake linings/shoes, Chrome Vanadium, bright nickel-plated. ‘

R g

L mm

Code ‘

76 41 30 01 76 41 30 02

210 330

245 380

‘

S 6 6

€ 25.50 32.70

Code

Type

R g

BMW, MINI

Type

R g

BMW: 518, 520i, 525i, 528i

‘

02 15 10 09

€ 8.95

‘

10613/1

54-7

Brake spring pliers

INHEX socket

for hexagon socket head screws, size 7 mm, 1/2'' a-drive, for changing brake linings.

with flexible anvil, for rivetted and glued brake linings/shoes.

‘ ‘

Code

L mm

R g

330

461

‘

76 41 30 21

€ 56.00

Code ‘

03 05 00 07

€ 8.40

‘

10613/2*

733/10-11

Brake spring pliers

size 11 mm, use with SERVICE-MANOSKOP® torque wrench No 730/5, for flare nuts on brake lines and bleed screws.

for fitting and removing the retaining springs on drum-brake pads, e.g. Mercedes-Benz, Type 168, A Class, Renault Clio and Twingo from August 2002.

‘

Code

‘

Code

R g

235

221

€

58 23 10 11

R g

Mercedes-Benz

46.50

* to be discontinued

733/10-12

OPEN-RING insert tool

size 12 mm, for flare nuts on brake pressure regulator, tightening torque 15–18 N m.

‘

Brake calliper file

for removing dust, rust and dirt from brake calliper groove.

‘

Code

Type

R g

BMW

‘ ‘

Code

58 23 10 12

L mm

R g

260

104

‘

74 54 01 01

€ 30.30

‘

€

733/10-14

32.50

‘

12373

€ 30.30

‘

12371

Type

‘

L mm

‘

76 41 30 22

OPEN-RING insert tool

size 14 mm, for flare nuts on main brake cylinder, tightening torque 16–25 N m (BMW), for flare nuts on brake lines and bleed screws (Mercedes-Benz).

Steel wire brush

special slim design.

‘

Code

‘

Type

R g

BMW, Mercedes-Benz

‘

Code

L mm

Rows

R g

€

230

8.45

‘

77 44 00 01

58 23 10 14

733/10-17

‘

Code

Type

R g

BMW

‘

58 23 10 17

733/10-19 measuring range throat depth mm mm

R g

233

‘

€ 30.30

‘

77 37 10 03

OPEN-RING insert tool

size 17 mm, for flare nuts on main brake cylinder, tightening torque 16–25 N m.

Brake disc gauge

DIN 862, for measuring the thickness of car and motorcycle brake discs in situ, stainless steel, with locking screw and trailing vernier scale (1/10 mm), in wooden storage box.

Code

30.30

‘

12900/2N

€

OPEN-RING insert tool

size 19 mm, for flare nuts on main brake regulator, tightening torque 30–40 N m.

109.00

‘ ‘

Code

Type

R g

BMW

‘

58 23 10 19

€ 30.30

‘

301

Special automotive tools 54CV/9

Set: Screwdriver sockets

3045K

for spline socket head screws (Ribe CV), for brakes and cylinders head bolts. Content: M5; M6; M7; M8; M9; M10; M12; M13; M14

Special socket

for oil filters, size 74 mm, 14-point, 10 mm dia. bore and outside hexagon 22 mm Ø, extremely compact – essential where access is awkward.

‘ ‘

Code

R g

Type

‘

96 03 09 01

Fiat, Alfa

1420

S 1

€ 127.90

Code

total height mm

Type

R g

e.g. Ford Mondeo from 02/2002

104

‘

74 37 00 03

‘

€ 14.60

‘

54CV

Screwdriver sockets

3046

for spline socket head screws (Ribe CV), length 60 mm, 1/2'' a-drive, for brakes and cylinder head bolts.

Special sockets

for fitting and removing oil filter covers when changing oil filter cartridges.

‘

Code

size

R g

Type

‘

03 09 00 07 M7 03 09 00 09 M9 03 09 00 13 M13

Fiat Fiat (1.2 l; 8V/16V) Fiat, Alfa (e.g. 1.6 l; 16V)

78 92 123

S 5 5 5

€ 12.60 13.80 16.30

‘

Code

A a mm '' Type

R g S

‘

Special tools for lubrication service

02 11 10 32 32

3/8

02 11 10 36 36

3/8

e.g. Audi, MAN, Vauxhall Astra, Corsa, VW Passat 130 e.g. BMW, Mercedes-Benz cars, 100 D Transporter, MAN, Vauxhall Vectra B DI 16V, VW Lupo 1.2 TDi, model year 99 171

€

16.80

20.10

‘

1015

Oil filter claw 12005

for loosening of oil filters on cars.

Strap wrenches

for oil filters etc., up to 140 mm diameter.

‘

Code

L mm

R g

12005 12005/1 1)

450 450

264 68

1 1

‘

76 50 00 01 79 15 00 01

‘

a Clamp. width total height length of claws R '' mm mm mm g S

74 62 00 02

3/8

Code

68–120

530

€ 24.20 9.35

‘

€

) spare strap

‘

82.00

‘

12007 3045

Special socket

Oil filter wrenches

adjustable for diameters 80–110 mm. Hardened anti-slip cams ensure safety during use.

for oil filters, size 74 mm, 14-point, 10 mm dia. bore and outside hexagon 22 mm Ø.

12007/2 12007/1 ‘

L mm

R g

12007/1 1) 12007/2 2)

150 240

226 319

1 1

‘

Code

total height mm

R g

131

‘

74 37 00 01 ‘

€ 14.90

Code ‘

76 52 10 01 76 52 10 02 ‘

) with 1/2'' a ) with lever handle

1 2 ‘

302

€ 28.00 34.20

/( 54-14

tools for engine and gear ( Special transmission

INHEX socket

for hexagon socket head screws, size 14 mm, 1/2'' a-drive, for use on oil drain plug.

12735

‘

Code

Type

R g

Mercedes-Benz

135

Type

R g

Fiat

287

‘

03 05 00 14

€ 11.40

‘

10765-12

Hexagon key wrench

Fiat-No A 5013 long, for hexagon socket head screws, size 12 mm, for oil drain plug on engine, gearbox and rear axle.

Clutch alignment tool

8-piece set, contains 1 clutch alignment mandrel, length 220 mm; 1 combined sliding taper/cylindrical bush, cylindrical bushes from 22.2–25.2 mm; 1 sliding cylindrical bush, tapered at both ends, cylinder diameters 16– 21 mm; 5 cylindrical bushes, two sizes each, cylinder diameter 12–20 mm, in wooden storage box 55 x 81 x 38 mm.

‘

Code ‘

43 21 00 12

‘

€ 5.80

‘

R g

650

Type

R g

€

BMW

8.80

Type

R g

€

BMW

8.85

Type

R g

€

BMW

9.15

Type

R g

BMW

Type

R g

€

BMW

3.00

Code ‘

74 48 00 00

€ 105.00

‘

1054-13

INHEX socket

50TX-E10

for hexagon socket head screws, size 13 mm, length 70 mm, 1/2'' a-drive, for oil drain plug on engine.

Socket

for external TORX® screws, size E10, 1/2'' a-drive, use on mounting screws for GETRAG 260 gearbox, as well as on automatic gearboxes fitted to US and Japanese models.

‘

Code

Type

R g

Lancia

130

‘

03 15 07 13

€ 23.60

‘

Code ‘

03 27 00 10 ‘

1058

Oil service spanner 50TX-E12

bent, size 8 and 10 mm outside square, for drain plugs on sump, gearbox, differential.

Socket

size E12 ‘

‘

Code

Type

R g

Peugeot, Renault

314

‘

Code €

‘

03 27 00 12 ‘

44 73 08 10

20.30

‘

50TX-E14 1054KK-5

INHEX socket

Socket

size E14

with ball-point hexagon, size 5 mm, length 238 mm, 1/2'' a-drive, for use on socket head screws with difficult access up to an angle of 25°, size 5 mm for use on sump screws of 5 cylinder diesel engine, VW van T4.

‘

Code ‘

03 27 00 14 ‘

‘

Code

R g

Type

‘

03 31 00 05

VW/Audi

145

S 5

€ 18.40

‘

1054KK-8

54TX-T27

for inside TORX screws, size T27, 1/2'' a-drive, use on switchgear of automatic gearbox 3HP 22, 4HP 22.

INHEX socket ‘

size 8 mm, length 238 mm.

Code ‘

‘

Code

Type

R g

VW/Audi

154

‘

03 31 00 08

Screwdriver BIT ®

03 10 00 27 €

€ 10.60

‘

20.70

1418

‘

BIT

for inside TORX® screws, size T27, 1/4'' E-drive, use on switchgear on automatic gearbox 3HP 22, 4HP 22. ‘

Code ‘

08 13 00 27 ‘

303

(

Special automotive tools SERVICE-MANOSKOP® torque wrench

730N/5

11060-1a

Internal puller

capacity 16–20 mm, for sealing ring and bearing on crankshaft, use with counter stay No 11061-1.

10–50 N m, with tool carrier for insert tools, for tightening ZF switch-gear and adjustment brake belt BW 65 on automatic gearbox, to use with ratchet insert tool No 735/10.

‘

Code ‘

Type

R g

Mercedes-Benz

120

R g

654

Type

R g

Mercedes-Benz

131

R g

1500

‘

Code

Type

R g

BMW

831

‘

50 18 10 05

€

71 16 00 21

45.10

‘

242.00

11061-1

‘

735/10

€

Counter stay

Ratchet insert tool

reversible, 1/2'' a-drive.

‘ ‘

R g

Code ‘

58 25 00 10

147

S 1

€ 64.00

Code ‘

71 17 00 11

€ 42.90

‘

6547

11060-2

Special circlip pliers

Internal puller

capacity 20–27 mm, for bearing bush of idler gear on oil pump drive, use with counter stay No 11061-2.

use on retaining ring on gearbox main shaft (all ''GETRAG'' and ZF gearboxes S4-18/3).

‘

Code

‘

Code

Type

R g

BMW

154

‘

65 47 41 70

‘

€

71 16 00 12

€ 51.00

‘

28.30

‘

11061-2 3049-8

Counter stay

INHEX socket

for hexagon socket head screws, size 8 mm, length 24 mm, 3/8'' a-drive, for use on mounting screws on fluid fly-wheel. ‘

‘

Code

Type

Mercedes-Benz

‘

02 15 24 08

Code

R g

‘

€

71 17 00 12 ‘

9.55

‘

SERVICE-MANOSKOP® torque wrench

730/2 51-27

€ 66.50

Socket capacity 4–20 N m.

extra deep, bi-hexagon, size 27 mm, 1/2'' a-drive, for rotating engine through hexagon on crankshaft.

‘

Code

‘

Code

Type

R g

Mercedes-Benz

294

‘

03 02 00 27

Type

R g

VW/Audi

315

‘

€

50 18 00 02

€ 194.00

‘

20.90

‘

734/5 1054-10

3/8''

for hexagon socket head screws, size 10 mm, length 140 mm, 1/2'' a-drive for bolts on car engines.

‘

Code

Type

R g

‘

03 15 14 10 ‘

304

Square drive insert tool

a-drive, for use with SERVICE-MANOSKOP® torque wrench No 730/2.

INHEX socket

Mercedes-Benz

150

S 5

€ 10.80

Code

Type

R g

VW/Audi

‘

58 24 00 05 ‘

€ 24.50

() 12717

Pin wrench

10623/1

offset, distance between pins 18 mm, pin dia. O 2.9 mm, length 140 mm, for ring nut of tension pulley on 1.6 l diesel. ‘

Code

Type

R g

€

2/80 Golf, Jetta, Passat, Audi 80

9.95

‘

44 70 00 18

Hose clip pliers

registered design, with rotating jaws and multiple locking positions, single-handed use even with wide openings due to variable-geometry joint, especially for 12 and 15 mm wide, large-format hose clips, e.g. for Alfa Romeo, Audi, Citroën, Fiat, Ford, Mercedes-Benz, Opel, Peugeot, Porsche, Renault, VW. ‘

‘

Code

L mm

R g

290

414

‘

76 46 00 12 ‘

) Special tools miscellaneous 157

10623/2

‘

G mm

R g

25–75

705

‘

60 11 00 01

Hose clip pliers

registered design, with Bowden cable and multiple locking positions, especially for 12 and 15 mm springsteel hose clips, suitable for use near cooling and heating systems up to a diameter of 42 mm, access to hardto-reach places using Bowden cable remote action (length 610 mm), e.g. for Alfa Romeo, Audi, Citroën, Fiat, Ford, Mercedes-Benz, Opel, Peugeot, Porsche, Renault, VW.

Chain exhaust-pipe cutter

infinitely adjustable, with twist handle, also suitable for special steel pipes up to 1.8 mm wall thickness, chain length 270 mm.

Code

€ 64.50

€ 116.00

‘

Code

L mm

R g

300

565

‘

76 54 00 01

€ 111.00

‘

K157

Chain

‘

183

‘

69 13 00 01

Replacement Bowden cable for No 10623/2

R g

Code

€ 85.50

‘

Code

R g

120

‘

79 54 00 01

€ 33.00

‘

1225

Special extension 10625

curved, for use on magnetic switch diesel pump.

‘

Code

D ''

R g

3/8

128

‘

12 25 00 01

€ 18.60

for application of 1 and 2-ear clamps on shaft sleeves, radiator and fuel lines e.g. for Audi, BMW, Ford, GM, Honda, Mazda, Mercedes-Benz, Nissan, Opel, VW, quality steel, black paint finish. ‘

‘

Code

10614

Hose clip pliers

Ear clamp pincers

L mm

R g

225

340

L mm

R g

200

173

‘

76 54 00 02

€ 26.40

‘

for self tightening hose clips, nickel-plated.

10625/2

‘

Code

L mm

R g

220

293

‘

76 46 00 00

€ 28.10

Hose clip pliers

for correctly closing hose clips without ears, for shaft sleeves on Audi, Mercedes-Benz, Toyota and VW. Quality steel, nickel-plated, jaws gunmetal finished.

‘

10615/1

Hose clip pliers CLIC

‘

for CLIC hose clips e.g. Alfa Romeo, Audi, BMW, Opel, Peugeot, VW. Work can be carried out at various angles due to stepless swivelling jaws.

Code ‘

76 54 00 03

€ 43.10

‘

Code

L mm

R g

200

189

‘

76 46 00 13

€ 42.10

‘

10 305

)

Special automotive tools 12001-1*

Thread taps

1435

M 20 x 1.5; for fast, accurate tapping of aluminium union nuts for airconditioner cooling hoses for cars and other hydraulic connectors, e.g. for Audi, Opel, VW. Patent, with inner bore for holding hose collar, made of high-grade HSSG M2 steel. 13 mm hex drive for a T-bar or ratchet with a 13 mm socket.

BIT

for inside TORX screws, size T55, 5/16'' E-drive, for screws in rear seats, for use with bit-holder insert tool No 736/40. ®

‘

Code

L mm

R g

125

164

‘

72 10 00 05

Code

Type

R g

€

BMW: X6 model E71, series 7 model F01/F02

5.70

Type

R g

€

BMW: X6 model E71, series 7 model F01/F02

112

Type

R g

€

BMW

4.30

Type

R g

€

BMW

167

14.60

€

‘

€ 109.00

08 14 00 55 ‘

‘

* to be discontinued

736/40

‘

12718

BIT holder insert tool

Internal hex drive 5/16'', for screws in rear seats, for use with bit No 1435.

Flat scraper

special steel, for removal of gasket seals on carburettor, valve cover, cylinder head etc. ‘

Code

L mm

R g

265

160

‘

72 03 01 01

€ 17.50

‘ ‘

12763

Code

Pull hook for rubber exhaust mountings

‘

58 26 10 40

with T-bar, chromium-plated, black dip-coated, for pulling rubber loops on exhaust mountings. All cars except Ford.

1445

for inside TORX tamper resistant screws, size T30, 1/4'' E-drive, use on sensor screws wheelhouse (models with airbag system).

L mm

R g

210

100

‘

74 20 00 01

BIT ®

‘

Code

€

‘

13.20

‘

Code ‘

12771

38.90

‘

08 16 00 30

Extractor pliers

‘

for removing fixing plugs on door trims, outside trims, rubber bumper covers etc. Joint and jaws made of hardened sheet steel, handles made of shaped sheet steel.

12506-6

Hexagon nut spinner

flexible, size 6 mm, for screws on hose clips of radiator hose, max. tightening torque 8 N m. ‘

‘

Code

L mm

R g

230

182

‘

76 48 00 01

€ 33.10

Code ‘

43 10 02 06 ‘

‘

12975

440-17

Fuel hose clamp

CROW-RING spanner

size 17 mm, a-drive, for use on pipes for air conditioning unit. 3/8''

capacity up to Ø 20 mm, for stopping fuel flow temporarily.

‘

Type

R g

Mercedes-Benz

‘

Code

R g

€

7.20

‘

74 34 00 01 ‘

10 306

Code ‘

02 19 00 17 ‘

41.80

) 440-19

CROW-RING spanner

11060-1

size 19 mm.

Internal puller

capacity 12–16 mm, for use on bearings, seals and bushes.

‘

Code

R g

‘

€ ‘

02 19 00 19

41.00 Type

R g

Mercedes-Benz

110

Type

R g

Mercedes-Benz

131

Type

R g

Mercedes-Benz

365

Type

R g

Mercedes-Benz

385

Type

R g

Mercedes-Benz

558

‘

Code ‘

440-22

71 16 10 11

CROW-RING spanner

€ 45.10

‘

size 22 mm.

11060-2

‘

Code

R g

‘

02 19 00 22

€ 42.60

Internal puller

capacity 20–27 mm. ‘

‘

Code

440-24

‘

CROW-RING spanner

71 16 00 12

€ 51.00

‘

size 24 mm.

11060-3

‘

Code

R g

‘

02 19 00 24

€ 42.60

‘

735/20

capacity 27–36 mm. ‘

Code

Ratchet insert tool

Internal puller

‘

71 16 00 13

reversible, 1/2'' D-drive, use with SERVICE-MANOSKOP® torque wrench No 730/12 and 730/20, for general service work.

€ 54.00

‘

11060-5

Internal puller

capacity 36–46 mm. ‘

‘

Code

Type

R g

Mercedes-Benz

302

‘

Code €

‘

71 16 00 15

€ 74.50

‘

58 25 00 20

68.00

‘

11060-6

SERVICE-MANOSKOP® torque wrench

730R/5

Internal puller

capacity 46–58 mm.

capacity 6–50 N m, 3/8'' D-drive, for general service work.

‘

Code ‘

71 16 00 16

‘

Code

Type

R g

Mercedes-Benz

945

‘

96 50 20 05

€ 95.00

‘

€

11061-1

271.00

Counter stay

‘

for Internal Puller No 11060/0–2, for use on bearings, seals and bushes.

730R/12

SERVICE-MANOSKOP torque wrench

25–130 N m, 1/2'' D-drive ‘

Code

Type

R g

1410

‘

96 50 20 12

Mercedes-Benz

€ 301.00

‘

Code

730R/20

‘

SERVICE-MANOSKOP torque wrench

R g

654

R g

1500

‘

71 17 00 11

€ 42.90

‘

40–200 N m, 1/2'' D-drive.

11061-2

Counter stay

‘

Code

Type

for Internal Puller No 11060/3–7.

R g

1555

‘

€ ‘

96 50 20 20

Mercedes-Benz

320.00

‘

Code ‘

71 17 00 12

€ 66.50

‘

307

)

Special automotive tools 12506-7

Hexagon nut spinner

SERVICE-MANOSKOP® torque wrench

730/20

flexible, size 7 mm, for screws on hose clips of radiator hose, max. tightening torque 8 N m.

capacity 40–200 N m. ‘

R g

1250

Type

R g

VW/Audi

302

‘

Code

Type

R g

€

Mercedes-Benz

168

14.70

‘

43 10 02 07

Code

Type

‘

50 18 00 20

VW/Audi

€ 252.00

‘

10760CV2,5–17

735/20

Hexagon key wrench

Ratchet insert tool

reversible, D-drive, for use with SERVICE-MANOSKOP® torque wrench No 730/20. 1/2''

Fiat No A 89601 up to A 89611 for hexagon socket head screws, size 2.5 mm up to 17 mm (see page 208).

‘

720Nf/80

Standard-MANOSKOP® torque wrench

Code ‘

58 25 00 20

SERVICE-MANOSKOP® torque wrench

730/40 ‘

Type

R g

6102

‘

50 19 00 81

VW: LT Syncro

68.00

‘

capacity 160–800 N m, 3/4'' a-drive.

Code

€

capacity 80–400 N m.

763.00

‘

Code

SERVICE-MANOSKOP® torque wrench

730/5

R g

1880

Type

R g

VW/Audi

510

Type

‘

50 18 00 40

VW/Audi

€ 369.00

‘

capacity 5–50 N m, for general service work.

735/40

Ratchet insert tool

reversible, D-drive, for use with SERVICE-MANOSKOP® torque wrench No 730/40. 3/4''

‘

Code

Type

R g

VW/Audi

805

‘

50 18 00 05

€ 209.00

‘

732/10-13

Ring insert tool

size 13 mm, for use with SERVICE-MANOSKOP® torque wrench No 730/5.

‘

Code ‘

58 25 00 40

€ 101.00

‘

Code

Type

R g

VW/Audi

‘

58 22 10 13

€ 28.00

‘

735/10

Ratchet insert tool

reversible, D-drive, for use with SERVICE-MANOSKOP® torque wrench No 730/5. 1/2''

1421

Bit screwdriver socket

for inside TORX® screws, outside E 1/4'' C 6.3 size T45, length 26 mm, for use on door hinges. Drive Tools: f.e. ratchet reversible No 725/4B and ratchet tap holder No 1820 or ratchet reversible No 725/4B and torque wrench. ‘

Code

Type

R g

€

3.75

‘

08 13 00 45 ‘

‘

Code

Type

R g

VW/Audi

147

‘

58 25 00 10 ‘

10 308

€ 64.00

VW: Golf III

c IMPACT sockets

2509

Special tools for HGVs

a-drive, for power drivers, extra deep, with reduced diameter, Chrome Alloy Steel, gunmetal finish.

3/4''

Wheel braces DIN 3119/ISO 6788, forged centre section, pressed-in extension arms with extra deep forged socket heads, Chrome Alloy Steel, chrome plated. ‘

Code

A mm

d1 mm

d2 mm

L mm

t mm

R g

27 30 32 33

40.5 44.3 46.8 48

44 44 44 44

100 100 100 100

72.5 72.5 72 72

672 728 778 803

2 2 2 2

‘

25 09 00 27 25 09 00 30 25 09 00 32 25 09 00 33

€ 47.60 51.50 55.00 56.00

‘

for Trilex wheels ‘

‘

Code

A mm/''

L mm

R g

34c HGVs 35c cars

24; 27; 32; D 3/4'' 700 17; 19; 22; D 1/2'' 400

5053 2058

1 1

‘

43 03 00 05 43 03 00 06 ‘

€ 140.00 90.50

c IMPACT sockets

2609

1'' a-drive, for power drivers, extra deep, with reduced outside diameter, Chrome Alloy Steel, gunmetal finish.

Tyre levers Handy, sturdy construction, purposefully shaped, Chrome Alloy Steel. ‘

Code

A mm

d1 mm

d2 mm

L mm

t mm

R g

27 30 32 33

42.3 46 48.5 49.8

54 54 54 54

110 110 110 110

80 79.5 79 78.5

1001 1047 1015 1102

2 2 2 2

‘ ‘

Code

L mm

R g

39/1 HGVs 39/2 HGVs 39/3 HGVs 39 cars

600 600 600 400

897 1172 915 383

5 5 5 5

‘

74 01 06 00 74 01 06 02 74 01 06 03 74 01 04 00

€ 35.10 27.60 23.70 23.60

26 09 00 27 26 09 00 30 26 09 00 32 26 09 00 33

€ 58.50 64.50 68.00 68.00

‘

for wheel nuts ‘

‘

24-17x19 1068

Air filter claw

OPEN-RING spanner

bi-hexagon, size 17 x 19 mm, for all threaded connectors on injector pipes.

for loosening of filter cartridges on air brakes (trucks).

‘

Code

Type

R g

€

Mercedes-Benz

151

18.10

Type

R g

Mercedes-Benz

341

‘

41 08 17 19 ‘

51-30

Socket

extra deep, bi-hexagon, size 30 mm, 1/2'' a-drive, on injector post. ‘

‘

a Clamp. width total height length of claws R '' mm mm mm g S

74 62 00 11

1/2

Code ‘

100–145

925

€ 222.00

‘

Code ‘

03 02 00 30

€ 21.20

‘

440-27MB

CROW-RING spanner

for setting of electronic injection on 440-HP-engines.

‘

Code

Type

R g

Mercedes-Benz

‘

02 19 10 27

€ 51.50

‘

309

Special automotive tools 3678

4-pin socket

24-10x12

length 72 mm, a-drive, for use on pressure nut of injector post. 1/2''

OPEN-RING spanner

hexagon, size 10 x 12 mm, for general service work. ‘

Code

‘

Type

R g

€

Mercedes-Benz

14.40

‘

Code

Type

R g

Mercedes-Benz

153

‘

03 81 00 01

€

41 08 10 12 ‘

35.50

440-30

‘

1054-10

CROW-RING spanner

size 30 mm, 1/2'' a-drive for use on hydraulic pipe flare nuts.

INHEX socket

for hexagon socket head screws, size 10 mm, length 140 mm, 1/2'' a-drive, for cylinder head bolts.

‘

Code

R g

Type

‘

03 15 14 10

Mercedes-Benz

150

S 5

€ 10.80

Code

Type

R g

Mercedes-Benz

155

‘

03 19 00 30

€ 53.50

‘

3054X-M12

540-19

Screwdriver BIT

CROW-FOOT spanner

size 19 mm, for use on new push connector for pneumatic installations on new light-weight truck series.

for tri-square socket head screws (XZN), size 12, length 140 mm, Ø 11.5 mm, 1/2'' a-drive for cylinder head bolts with tri-square socket head M 12. ‘

Code

Type

R g

Mercedes-Benz

160

‘

03 26 14 12

€

‘

Type

R g

Mercedes-Benz

14.00

‘

Code ‘

11068-2

02 20 00 19

Piston ring compressor

€ 29.10

‘

of special spring steel, infinitely variable adjustment, c/w adj. spanner, capacity Ø 90–175 mm.

540-24

CROW-FOOT spanner

size 24 mm. ‘

Code

‘

Code

Type

R g

Mercedes-Benz

270

‘

74 14 00 03

€

02 20 00 24

37.50

40.10

SERVICE-MANOSKOP® torque wrench

730R/2 Socket

€

‘

55-30

R g

‘

capacity 4–20 N m, 3/8'' D-drive, for use on new push connector for pneumatic installations on new light-weight truck series.

size 30 mm, hexagon 3/4'' a-drive, for U-bolt nuts, front.

‘

Code

‘

Code

Type

R g

Mercedes-Benz

313

Type

R g

Mercedes-Benz

386

‘

05 01 00 30

€ 15.70

‘

55-36

Socket

size 36 mm, for U-bolt nuts, rear. ‘

Code ‘

05 01 00 36 ‘

10 310

Type

R g

Mercedes-Benz

455

‘

€ 17.10

96 50 20 02 ‘

€ 256.00

730R/40/32 Torque wrench set

54/12

Set of INHEX sockets

32 pieces, in steel case, for general service work. Content: 1 SERVICE-MANOSKOP® No 730/40, 80–400 N m, 1 ratchet insert tool No 735/20, reversible, 1/2'' D-drive; 1 square drive insert tool No 734/20, 1/2'' D-drive; 7 o/e insert tools No 731/40, sizes 13, 15, 17, 19, 22, 27, 30 mm 1 No 3731/40 size 24 mm; 7 ring insert tools No 732/40, sizes 13, 15, 17, 19, 22, 24, 27 mm 10 sockets, bi-hexagon No 50, sizes 13, 14, 15, 17, 19, 22, 24, 25, 30, 32 mm 4 accessories, 1/2'' a-drive: 1 T-handle No 506 1 extension 255 mm No 509/10 1 extension 130 mm No 509/5 1 extension 55 mm No 509/2

for hexagon socket head screws, in steel case, for general service work. Content: 12 INHEX sockets No 54, sizes 4, 5, 6, 7, 8, 10, 12, 14, 17, 19 mm, No 3054/8, No 1054/10, 1/2'' a-drive.

‘

Code

Type

R g

‘

96 50 20 53 ‘

Mercedes-Benz

9739

S 1

‘

Code

Type

R g

2131

‘

96 03 05 03

Mercedes-Benz

€ 152.50

‘

721Nf/80

Standard-MANOSKOP® torque wrench

capacity 160–800 N m, 3/4'' D-drive, for general service work.

€ 1235.20

Code

Type

R g

7222

‘

50 20 00 81

Mercedes-Benz

€ 980.00

‘

10 311

The STAHLWILLE-KABELEX速 range

Private cars

Lorries

Contact size mm

Tools/bushes

Round plug systems/ crimpcontacts*)

BMW

Fiat

x x

Ford

Mazda

MercedesBenz

Opel

x x

PSA

Renault Volvo

x x

VW/Audi Seat/Skoda/ Porsche

x x

MAN

MercedesBenz

x x x

Scania Volvo

x x x

Round plug systems/ soldered contacts Flat plug systems with 2 or more locking tongues Crimp contacts

x x

x x x x

x x x

x x

x x x

x x x x

x x

x x x x

x x

x x x x

*) The complete tool consists of ejection tool with bush.

long

x x x x

x x x x x

x x x

x x x x

1501 + 1511 1502 + 1512 1503 + 1513. 1523 1504 + 1514 1505 + 1515 1506 + 1516 1507 + 1517 1508 + 1518

O 1.5 pin contact

1575

O 4

1584

O 2.5

1585

2.8

1551

5.8

1552 1556

9.5

Maxi Power Timer-contacts

1559

2.8

ducon

1565

1.5

ducon

1566 ducon

ducon

1567 1568

VKR 1577 box contact MKR/MKS1577-1 contacts SLK-contacts 1578K-1 (primary) SLK-contacts 97 (primary + secondary) 1578K-2 LSK-contacts

1589K

1.65

E 95

1587

For GSK-flatfuse contacts (1-, 2- and 3-channel plugs, 2, 4 and 6 locking tongues)

1588

2.8/5.8

1591

Junior Power Timer-contacts Standard Power Timer-contacts

0.64

1556-1

MQS asymetrically

x x

312

Flat plug systems with 2 locking tongues asymmetrical Crimp contacts

Flat plug systems with 1 locking tongue Crimp contacts

O 1.5

9.5

x x x x

long

4.8/6.3

x x

O 1.5

1.6

x x x x

x x x

O 4 ABS

O 4

x x

O 3.5

O 2.3

x x

O 1.5

O 2.5

2.8

1557

4.8

1558

2.8

1572

2.8/5.8

1553

2.8

1554

5.8

1555

several pid-pod

1562

0.8

ducon

1563

1.5

ducon

1564

1.6

without box

1574

2.8

1576

TORX®

TORX® Screw Sizes, according to DIN

DIN

931/933

M2 ST 2.2 M 2.5 ST 2.9 M3 M 3.5 ST 3.5 ST 3.9 M4 ST 4.2 ST 4.8 M5 ST 5.5 M6 ST 6.3 M7 M8 M 10 M 12 M 14 M 16 M 18 M 20 M 22 Camcar Licence sheet

E48

912

963/965

964/966

T88

T10

E58

T10 T15

T20

T10 T15

T20

7984

7985

T10

T10 T15

T20

7991

T25

E88

T30

TMF16001

7983

T88

T10 T15

T20 T25

T25

T30

TMF17081

TMF17082

TMF17083

T20

T25

T45 T50 T55 T60 T70 T80 T90 1*T100* TMF17012

7982

T10

E68

E10 E12 E14 E18 E20 E24 E24

7981

T40 T50

T45 T50

T45 T50 T55 T60 T70 T80 T90

T45 T50

T40 T50

TMF17065

TMF17066

TMF17069

TMF17085

TMF17091

*Special screw

Screw correlation for TORX® Tools

size

E4 E5 E6 E7 E8 E10 E11 E12 E14 E16 E18 E20 E24

3.8 4.7 5.7 6.2 7.5 9.4 10.1 11.1 12.9 14.7 16.6 18.4 22.1

Screws metr. M3 M4 M5 M6 M6–M7 M8 – M10 M12 M12 M14 M16 M18–M20

size

2.2–2.9 – – – 3.5–4.2 – – – – – – – –

T5 T6 T7 T8 T9 T10 T15 T20 T25 T27 T30 T40 T45 T50 T55 T60 T70 T80 T90 T100

mm 1.4 1.6 2.0 2.3 2.5 2.7 3.3 3.8 4.4 15.0 15.5 16.6 17.8 28.8 11.2 13.2 15.5 17.6 19.9 22.1

Screws metr. M1.4–M2 M2 M2.5 M2.5 M3 M3–M3.5 M3.5–M4 M4–M5 M4.5–M5 M4.5–M5–M6 M6–M7 M7–M8 M8–M10 M10 M12 M14 M16 M18 M20 M22

HH – – 2.2 – 2.9 – 3.5 4.2 4.8 – – – – – – – – – – – 313

Index of numbers

Page

AB 97N 18 BL 150 246 BL 153 246 BL 1500 246 BZ 150/3/4 246 BZ 153 246 BZ 1500 246 ES TX/32 37 ES 1/4⬙ + 10760CV 38, 101 ES 1/2⬙– 512/6 38, 132 ES 10/10; 5,5x7–22x24 mm 36, 67 ES 10/10; 6x7–30x32 mm 36, 67 ES 13/5; 27–32 mm 36, 70 ES 13/8; 16–24 mm 36, 70 ES 13/10; 6–15 mm 36, 69 ES 14/8; 16–24 mm 36, 72 ES 14/10; 6–15 mm 36, 72 ES 20/8; 6x7–19x22 mm 36, 73 ES 20/10; 6x7–30x32 mm 37, 73 ES 24/7; 8x10–19x22 mm 37, 78 ES 25/7; 7x8–17x19 mm 37, 79 ES 29/6; 8x9–18x19 mm 37, 80 ES 52/17 38, 117 ES 54/54KK 38, 120 ES 54KK/5 38, 121 ES 54X/54TX 39, 123 ES 55/6/4 39, 135 ES 102/105/108/8 43, 250 ES 102/108/109/4 42, 250 ES 456/16/6 38, 116 ES 721/15/3/2 40, 300 ES 1054/2054 39, 121 ES 1054/2054TX/6 39, 123 ES 2309K/3 39, 145 ES 2309/4 39, 144 ES 4620/4622/ 4632/8 40 ES 4620/4628/ 4630/7 40 ES 4620/4630/8 40 ES 4622–4734/9 40 ES 4622SK/ 4632SK/6 40 ES 4650/9 41 ES 4656/9 41 ES 4660/4665/VDE/6 41 ES 4820/4830/6 41 ES 4820/4830/8 41 ES 4856/9 41 ES 6501–6602/7A 42, 233 ES 6501–6602/7B 42, 233 ES 6543–6546/4 42 ES 10670–13110/11 42, 253 ES 10750/10; 6x7–20x22 mm 37, 83 ES 10751/10; 6x7–20x22 mm 37, 83 ES 10768/6 41, 211 ES 10769/7 42, 211 ES 10769B/7 42, 212 ES 10956/10960/2 43, 249 ES 10956/10970/2 43, 249 ES 12500N/7 41, 207 H 11030 266 H 11050 264 K 157 246, 305 KL 158 247 MP300 184 PB98 18 PZ1221–PZ1223 148 RI 1500 246 RL 150, RL 153 246 RL 1500 246 R 920 18 SCH 60–140 17 SCH 60–140KM 17 SD 10351N 281 SDH 921 18 SP 11040 267 SP 11041 267 SP 11050 267 SP 11053 267 SP 11055 267 SP 12150 267 SR 150 246 SR 153, SR 155 246 SR 290–SR 393 184 ST 11 61 ST 97 62 ST 97 R 62 STW 391-700 184 STW 392-70 184 STW 393-70 184 TCS TX/57 MF N 53 TCS 1/3 MF 59

314

Page

TCS 1/4⬙ + 10760CV 49, 101 TCS 1/2⬙–512/6 50, 132 TCS 1/2⬙–512/9 40, 132 TCS 10/10; 6x7–24x27 mm 46, 67 TCS 10/10; 6x7–24x27 mm MF 46, 67 TCS 10/10; 6x7–30x32 mm 46, 67 TCS 10/10; 6x7–30x32 mm MF 46, 67 TCS 10+13+24/30 46, 67 TCS 10a/9 46, 68 TCS 12+13+14/29 47, 71 TCS 13/17; 6–24 mm 47, 70 TCS 13/17; 6–24 mm MF 47, 70 TCS 13/18; 6–24 mm 46, 70 TCS 13/21; 6–34 mm 47, 70 TCS 13/25; 5,5–34 mm47, 70 TCS 13a/19 47, 71 TCS 13a/23 48, 71 TCS 14/5; 17–21 mm 48, 72 TCS 14/8; 8–16 mm 48, 72 TCS 20/8; 6x7–19x22 mm 48, 74 TCS 20/8; 6x7–19x22 mm MF 48, 74 TCS 20/10; 6x7–30x32 mm 48, 74 TCS 25/7 48, 79 TCS 29/7; 8x9–20x22 mm 48, 80 TCS 40/35/9 49, 102 TCS 40/41/44/8 49, 102 TCS 40/45/50/89/19 52 TCS 40/456/52/78/19 52 TCS 50TX/54TX/17 51, 120 TCS 50/51/52/32 51, 118 TCS 50/52/30/6 MF 51, 132 TCS 50a/17 51, 118 TCS 52/17 51, 118 TCS 52/18 MF 51, 118 TCS 54/2309K/12506 53 TCS 54/54X/16 53, 121 TCS 55/11/6 53, 135 TCS 102–108/11 57, 251 TCS 102–108/ 10956/10960/18 58, 252 TCS 102–108/ 10957/10960 MF 57, 251 TCS 102–108/ 10957/10960/13 58, 252 TCS 102–108/ 10957/12718/13 57, 251 TCS 102–108/ 10957/10960/16 58, 252 TCS 102–108/ 10960/10 57, 251 TCS 102–109/ 10956/10960/6 57, 251 TCS 456/16/4 MF 50, 116 TCS 456/16/7 49, 116 TCS 456/31/8 50, 116 TCS 4620/4630 54, 200 TCS 4620/4660VDE 54, 201 TCS 4620/4660VDE + 10767 54, 201 TCS 4621/4734/16 54, 201 TCS 4622/4650 + 10760 + 10766 55, 201 TCS 4650 55, 203 TCS 4660/4665 55, 204 TCS 4724/4840 + 10767 55, 205 TCS 4820/4830 55, 205 TCS 4856 55, 206 TCS 6501–6602/4 56, 234 TCS 6501–6602/4N 56, 234 TCS 6534–6545/6 57, 234 TCS 6543–6564/3 56, 234 TCS 6543–6546/4 56, 234 TCS 10765/10768/ 12507/19 56, 211 TCS 10769 + 10771/17 56, 212 TCS 12025–13110/11 58, 254 TCS 13126/13127/2 59, 259 V 12614 266 VE 50-150 17 010, 012, 023 68 013/KH 68 5, 5.1/2 81 8 81 10, 10a, Sets 66–68 12, 12a, Sets 74 13, 13a, Sets 68–71 14, Sets 71, 72 15 72 16, Set 75 20, 20a, Sets 73, 74 20TX 77

Page

21, Sets 76 21TX 77 23, Set 76 24, 24a 78, 297 25, 25aN, Sets 79 25aSP 79 25B 79, 151 25GK 299 26a 80 27 80 29, 29a, Sets 80 35c Pkw 300, 309 34c Lkw 300, 309 39 Pkw, Lkw 300, 309 40D, 40aD 88 40, 40a, 40DL, 40aDL 88, 89 40-3 296 40aD/10CL 88 40aDL/7 89 40aDL/10CL 89 40aDV, 40L 89, 90 40aSP, 40aLSP 91 40aD/8/1H 96 40CL 92 40, 40a, Sets 97–102 40TX 90 40TX-E8 297 40/7N–40/9N 138, 139 40/9K 138 41K 91 44, 44a 91 44K 91 44KTX, 44KTXB, 44P 92 44PZ 92 45, 45a 103 45, 45a, Sets 112–115 45aP 105 45aPSP 105 45aSP 105 45CL 109 45TX, Set 105 45/1K 138 45/1N 138 46, 46a 104, 298, 299 46aSP 105 47, 47a 104, 105 47TX 105 49, 49a 106 49TX, Set 106 49X 106 50, 50a 117 50, 50a, Sets 128–131 50aPSP 120 50aPLSP 120 50CL 124 50IMP 144 50TX, Sets 119, 303 50/1N–50/6N 138, 139 50/4K 139 51, 51a 118, 294, 295, 298, 304, 309 51aP 120 51S 119, 298, 300 51IMP 144 51/8 119 52 117 52 Sets 127–129 53 119 54, 54a 120, 301, 303 54/8/4 128 54/10 120 54/12 311 54IC 121 54KK 121 54CV, 54CV/9, 54X 122, 296, 297, 302 54TX 123, 294 54TX/9, 54TX/10 123 54TXB 124 54TXB/9 124 54TXB/10 124 55, 55a 133, 297 55, 55a, Sets 135 55IMP 146 55/6, 55/7 139 56 133 56IMP 146 59, 59X 133 59TX 134 60 136 60/1, 60/2 139 60 Sets 137 60IMP 147 61 82 64 136 66IMP 147 70V 183 70VK 183 71 172, 173 73Nm/15 173 82/013 19 83/09 19

No 83/010 86TX 87aN 87N 88TX 89N 89TX 100, 92KM G 94N 94N/KM 96/3 97H/8 97H/KM 97N 97N/KM 100 101, 102 102 Sets 103 104 104-5/6D 105 105-8/6K 108 108/6D, 108/6Pc 109 110 112, 112/1 130a 130aSP 150 153 155 157 158 165N 180a 220, 220a 220aSP 230a 240, Sets 400, 400QR 400 Drall 401 402, 402a 402a Set 402aK 402aSP 403 404, 404QR 405 405QR 405W 406 407, 407QR 409 409M 409M/432M/514M/3 410 411 412 412-1 413 414H 415 415B 415QR 415QRL 415SG-QR 415SGB 415SGH 415SK 416 417/1 421 422 424, 425, 425QR 427 427QR 427W 428 428QR 431 432, 432M 433/1 434 435, 435QR 435SG-QR 440, 440a 440S MJ 442 443 445 446/08 447, 447a 447aSP 450 452 453 456 460a

Page 19 100, 131 131 130 99 113 114, 131 17 16 16 17 15 15, 16 14, 15 14, 15 249 249 250 249 250 250 250 251 250 251 250 249 249 75 75 246 246 246 246, 305 247 247 75 77 77 75 78 93 94 94 90 90 90 91 94 94 94 94 94 94 95 95 95, 194 95, 111, 127 95 92 95, 152 95, 153 94 96 92 93, 151 92 93 93 93, 151 96 93 93 95 110 109 110 110 111 111 111 111 111 111, 112 111 111 109 109 107 107 112, 152 112, 152 110 19 109 109 110 110 110 103 103

Page

501 501B 5021/2 504 506 506QR 509 509IMP 509QR 509W 510 510IMP 510QR 512, 512G, 512SG-QR 512QR 513 127, 294, 513IMP 514, 514M 514IMP 515 517 522 532, 532G 540, 540a 540aHD 543 127, 552 554 556 558 559 560IMP 561 561IMP 563 568 568IMP 569 569IMP 712R/6 713R 720Nf 721 721Nf 725/4 725B 725L/5 725QR 730 167, 730D, 730DR 730N, 730NR 166, 730R/40/32 182, 731, 731a 178, 732, 732a 179, 180, 732/80 732G 732TX 733, 733a 180, 181, 734 734/80 734F 734K 734L/5 735 736 153, 737 755 760 775 775/30N/2 801N 802N 803N 804N 806/9 TCS 45, 806/10 34, 808/9 811N 841N 859 859IMP 866 866IMP 867IMP 871IMP 876N 876TX 882–888 900, 900/6Pc, Set 904 905/25, 906 910 912 913 913/1 913/2 913/3 920 920 C 920 C-SCH 922N 1000 TCS

126 126 183 126 126 126 126 145 126 126 127 145 127 125 125 297 145 127 145 125 125 125 125 108 108 152 134 134 134 134 134 146 134 146 134 134 146 134 146 171 171 168 168 169 177 177 177 177 304 164 304 311 179 296 180 180 180 301 178 178 178 195 178 177 181 181 170 175 174 154 22 23 23 24 283 282 35 25 26 137 147 137 147 147 147 130 130 136 254 255 254 20 18 18 18 18 18 11 11 11 11 293

Page

1015 302 1023 294 1042 298 1043, 1043/1 298 1049 106, 301 1054 121 1054-10 296, 304, 310 1054-13 295, 303 1054KK 122 1054KKTX 124 1054TX 123 1054TX/4Pc 124 1054X 122 1058 303 1062 294 1068 309 1100 TCS 292 1110 TCS 284 1157–1169 148 1180–1186 148 1200/1 151 1201 150 1204/8 149 1204/21-1 150 1204/21-2 150 1218–1223 148 1225 111, 305 1231–1234 148 1242–1250 153 1260–1262 153 1270–1272 153 1280–1284 153 1290–1296 153 1299 149, 169 1300–1304 149 1350–1360 148 1407–1421 148 1417 297 1418 303 1427 148 1430–1435 148 1435 306 1440–1446 149 1445 306 1474/2 281 1501–1508 274 1510 272 1511–1518 274 1520 272 1523 274 1550 272 1551–1555 274 1556–1559 274 1560 273 1562 274 1564–1568 275 1570/1, 1570/2 273 1572 275 1574–1587 275 1588–1589K 276 1590 273 1591 276 1650N, 1650K 247 1651 247 1652N 247 1655N, 1656N 247 1700 273 1720 273 1820, 1821 182 2049 106 2054 121 2054X 122 2054TX 123 2307TX 145 2308TX 145 2309 144, 300 2309K 144, 300 2500TCS 285 2501N TCS 287 2509 146, 309 2609 147, 309 2801 153 3000 295 3004 296 3022N/1TCS 290 3026N/1TCS 288 3027 25 3045 302 3045K 302 3046 302 3047 299 3049-8 106, 304 3049X 106 3054 121 3054X 122 3054X-M10 296, 297 3054X-M12 296, 310 3054X/54X/8 122 3115–3116 151, 152 3216 152 3316/1 152 3466 104, 298

Page

3505 127, 295 3678 310 3825/1 152 4000 150 4004 82 4006/1 150 4007 151 4008 96, 151 4008/27/1 96, 151 4025, 4026 82 4030–4036 154 4040–4045 154 4050–4058 154 4060 154 4110 93 4150 93 4150QR 93, 183 4204 82 4205a 81 4350 110 4350QR 110, 183 4600 104, 298 4606 104, 298 4620 202 4621 202 4622 202 4622SK 202 4628 202 4630 202 4631 202 4632 202 4632SK 203 4636 203 4640 203 4650 203 4650L 203 4656 204 4660 VDE 204 4665 VDE 204 4670 VDE 204 4691 200 4692 200 4693 200 4694 200 4695 VDE 204 4696 200 4697 200 4699 200 4724 202 4734 203 4744 203 4751 206 4752 206 4753 206 4797 206 4798 207 4820 205 4830 205 4840 206 4856 206 4891 205 4892 205 4899 205 5040 126 5091IMP 145 5092IMP 145 5100 104, 119, 298 5120 + 7210/15 125, 182 5120QR 125, 183 5520 134 5591IMP 146 5592IMP 146 6091IMP 147 6092IMP 147 6501 216, 238 6507 216, 238 6508 216, 238 6509 216 6510 217 6511 217 6512 217 6513 217 6514 217 6516 217 6517 235 6518 218 6519 218 6523 218, 238 6524 218, 238 6525 218 6526 235 6529 219, 239 6530 219, 239 6531 219 6532 219 6533 220, 239 6534 220 6535 220 6536 220 6537 221 6538 220 6540 235

Page

6543 221 6544 221 6545 222 6546 222 6547 222, 304 6549 224 6551 223 6554 223 6555 224 6556 224 6557 224 6558 224 6559 225 6561 225 6562 225 6562/1, 6562/2 225 6563 226 6564 226 6565 226 6566 226 6567 226 6568 227 6571 227 6572 223 6573 223 6575 227 6576 227 6600 228, 239 6601 228 6602 228, 240 6603 235 6604 236 6605 235 6606 236 6607 236 6608 229 6612 229 6613 236 6614 237 6615 237 6617 229 6618 229 6619 236 6620 237 6621 237 6622 230, 240 6623 230, 240 6624 230 6630 230, 240 6634 231 6637 231 6638 231 6639 231 6640 231 6641 232 6660 232 6661 232 6662 232 6670–6674 241 6676, 6677 241 6702 233 6703 233 6704 233 6705 233 6706 233 6966 232 7210 182 7250QR 183 7301, 7302 170 7350 110, 126, 183 7370 181, 182 7380N, 7385N 182 7395-1 165 7706PC 189 7707 W 192 7721–7724 193 7750 194 7750-1 191 7751 194 7752 194 7753 194 7755 299 7756 299 7759-1 172 7759-3 165 7759-4 194 7760 194 7787 195 7788 195 7789 127, 195 7790 191 7791 190 7791-1 190 7791-2 191 7792 191 7792-1 191 7794 186, 187 8002 20 8003S 59 8004S 61 8015–8016 60 8017 61

Page

8022N 61 8023-2 59 8023-3 59 8023-4 61 8023L 59 8024 60 8024-1 60 8025–8027 60 8029 60 8031–8041 21 8042 60 8043, 8043/1 59 8044–8046 61 8050 21 8144 20 8820 136 10350N 280 10351N 280 10351/1 281 10351/2 281 10351/3 281 10352 280 10352/1 281 10354, 10355 281 10356 281 10356R 281 10503 294 10506 294 10507N KK 204, 294 10518 294 10546 207 10551 207 10554 207 10599/2 300 10613, 10613/1 301 10613/2 301 10614 305 10615/1 305 10623/1, 10623/2 305 10625 305 10625/2 305 10626 298 10627 299 10642, 10643 279 10670, 10672 252 10676 252 10750, Sets 83 10750 1/2 83 10751 83 10757 212 10759, 10759a 96 10760CV 208 10760aCV 208 10760CV, 10760aCV Sets 208 10761 210 10765, Set 209 10766, Sets 209 10767, 10767a, Sets 210 10767H, Set 210 10768 211 10768–2K 211 10769 211 10769B 212 10771, Set 209 10775–10795 276 10800–10842 277 10845–10890 278 10895, 10900 278 10905–10908 279 10915, 10916 279 10917 279 10921 279 10922 279 10923 279 10925 278 10940 248 10955, 10955R 248 10956 248 10956R 248 10957, 10957R 248 10958 248 10960 248 10970 249 10980 276 10998 276 11005, 11006 279 11007 279 11030 266 11040 265 11041 267 11042 265 11050 264 11051, 11053, 11054 264 11055 265 11056 264 11060, 11061 265, 266, 297, 304, 307 11062 266 11063, 11063/1 295 11066 295 11066R 295

Page

11068 295 11069 295 11085 294 11095–11097 296 12000 254 12001-1 306 12005, 12007 302 12025 253 12030 253 12035 253 12036 253 12050 253 12053 253 12108 296 12150, 12152 265 12200 253 12250, 12251 256 12320, 12321 256 12322 256 12371 301 12373 301 12374 256 12375 298 12377 256 12378 256 12481 256 12495 297 12500N 207 12503 150 12504 150, 294 12506 207, 306, 308 12507–2K 207 12600 257 12613, 12614 266 12615 255 12616 267 12623 267 12665 254 12705 296 12717 305 12718 281, 306 12727–12730 280 12731 296 12735 303 12749, 12749R 281 12752 279 12753 279 12763 306 12769 280 12770 280 12771 306 12800 255 12900N 255 12900/1N 255 12900/2N 255, 301 12905 299 12910 257 12915 255 12920N, 12920NR 257 12921N, 12921NR 257 12922E 257 12923 257 12931 255 12932 256 12935N 255 12941N 258 12941R/4 258 12943N 258 12943R 258 12965, 12965R 258 12966, 12966R 258 12975 306 13006, 13007 154 13008 149 13010 149 13100 255 13110 255 13115 256 13120N 257 13120R 257 13120-1 257 13126 258 13127 258 13130, 13131 259 13135 259 13200a 26 13205a 27 13207a 27 13208a 28 13209 22 13210 28 13211a 29 13213a 29 13214 30 13214a 31 13214aWW 32 13216 20 13220 111 83812021–83812089 36–43

315

Alphabetical Index

Article

Page

A Accessories – 1/4HH Y – 3/8HH Y – 1/2HH Y – 3/4HH Y – 1HH Y Adaptors

92–96 109–112 125–127 134 136, 137 95, 109, 111, 112, 127, 134, 137, 145–147, 152, 154, 181, 182, 294 Additional tray 18 Air filter claw 309 Alignment tool 280 Angle module 165 Anvil dolly 277, 278 Automotive voltage tester 299

B Balance weight pliers Ball joint separators Ball point hexagon driver Bar handle Battery terminal pullers Bearing scraper BIT box BIT holder insert tool BIT ratchet BITS for – 5-star screws – inside hexagon screws

204, 134,

153, 93,

300 267 210 136 265 252 150 181 151

149 149, 153, 154, 169 – Phillips screws 148, 153, 154 – Pozidriv/Supadriv screws 148, 153 – slotted screws 148, 153, 154 – TORQ-SET screws 149 – TORX® screws 148, 149, 153 – tri-square socket head screws 148 – TRI-WING screws 149 BITS holders 95, 112, 127, 150–153 BITS screwdrivers 148, 149, 153 Blank end insert tool 181 Body files 279 Body spoons 278 Box spanners 83 Boxes, empty 138, 139 Bradawl 212 Brake caliper brush 301 Brake caliper file 301 Brake disc gauge 255, 301 Brake spring pliers 301 Brass punch 297 Brass wire brush 256 Bumping spoons 278

C Cabinet 20 Cable extractor tools KABELEX 272–276 Cable knife 256, 258 Cable shear 230, 240 Calibrating square drive insert tools 195 Calibrating square drive units 183 Calibrating systems 186, 189 Calibration software 194 Carburettor screwdriver 202 Carburettor tools 202, 294, 295 Car circuit tester 299 Centre punches 250 Chain pipe cutter 246, 305 Circlip pliers, inside and outside 221, 222, 304 Clamping blocks 247 Clamping screw 247 Claw lifter 257 Clip strips 92, 109, 124 Clutch alignment tool 303 Cold chisels 249, 250 Combination pliers 216, 238 Combination spanners 68–72, 75 Connecting pins (for sockets) 145–147 Connector pliers 227 Container 21

316

Article

Page

CONVERTA-modular system 10, 11 Corner display unit 61 Counter stays for puller 266, 304, 307 Cover 18, 61 Crimping pliers 231, 232 Crocodile terminal 299 Cross cut chisels 249 CROW-FOOT spanners 108, 310 CROW-RING spanners 107, 306, 307, 309 Cutter 258 Cutting wheels 246

Page

80 66–68, 74 73–78, 80 276 59 61 62 59 59–61 61 277, 278 247 200–207 281 17 17 250 93, 94

Gauges 182, 254, 255, 296, 301 Grinding tools 296 GRIPMAT 20 Gripping pliers 218, 227 Grooving chisels 249 Guide handle 281

Magazine case 11 Magazine drawer 11 Magnetic lifters 257 Main tester 207 Mains adaptor 194 MANOSKOP torque wrenches 164–173 Manutork 190, 191 Mechanics flat nose pliers 217 Mechanics gripping pliers 218 Mechanics oblique cutter 229 Mechanics round nose pliers 218 Mechanics snipe nose pliers 219, 220, 239 METAL pipe cutters 246 Micrometers 255 Mini-electronic side cutter 236 Mini-waterpump pliers 224 Multifunctional back panel 18 MULTIPOWER-torque multiplier 184 Multi-purpose worktop 18

Hacksaw and blades 253 Hacksaw frame 253 Hammers 248, 249, 276, 277 Hand vice 253 Heater plug socket pliers 299 Heavy duty pipe wrenches 224 Heavy duty ring spanners 81 Heavy duty side cutters 228, 240 Heavy duty steel fixers pincers 232 Heavy duty top cutters 229 Hexagon key wrenches 208–211, 303, 308 Hexagon nut spinners 207, 306, 308 – with T-handle 207 Hi-Lok-Tools 96 Holding device (for spanners) 21 Hooks 21, 60, 61 Hook spanner, adjustable 257 Hose clip pliers 305

253,

281, 217, 94, 110, 134, 110,

78 296 279 256 279 249 278 247 247 252 306 238 94 111 126 136 125 80 173 306

N Needle files Needle pliers Non-slip mat GRIPMAT Nut spinners Nut splitters Nylon hammers

255 220, 221 20 207 255 248

IMPACT accessories 145–147 IMPACT driver/set 154 IMPACT sockets – 1/2HH Y 144, 145 – 3/4HH Y 146 – 1HH Y 147 INHEX sockets 91, 106, 120–122, 133, 136, 295, 301 INHEX sockets for Ribe CV 122 Inlays, empty 43 Insert tools for MANOSKOP torque wrenches 177–182 Insert tools for TORSIOMETER/ TORSIOMAX 151–154 Internal pullers 265, 297, 304, 307

Oblique cutters O/E insert tools (for torque wrenches) O/E striking spanners Offset screwdrivers Oil cans Oil filter claw Oil filter wrenches Oil service spanner OPEN RING insert tools OPEN RING spanners

229, 237 180, 181 82 96, 207 256 302 302 302, 303 180, 181 78

P J Jack cable Jet reamers

194 294

F FastRatch ratchet wrenches Feeler gauges File blades File brush Files Finger protector(-chisels) Flange tool Flaring cones Flaring spindle Flat engineers scraper Flat (gasket) scraper Flat nose pliers 216, Flexible drive handle Flexible extensions Flexible handles 94, Flexible heads Flexible ratchets 93, Flexi-joint spanners Friction gauge Fuel hose clamp

Page

Ear clamp pincers 305 Ejection tools KABELEX 272–276 Electricians cable knife 256, 258 Electricians screwdrivers 202, 204 Electronics flat nose pliers 235 Electronics oblique cutters 236, 237 Electronics screwdrivers 206 Electronics side cutters 235, 236 Electronics snipe nose pliers 235 Electronics top cutters 237 Embossing hammer 248 Empty inlays 43 Empty tray for small components 18 Engineers files 253 Engineers hammers 248, 249 Engineers scrapers 252 Engineers scriber 256 EXPRESS pipe cutters 246 Extensions 94, 110, 111, 126, 134, 137, 145–147, 266, 295 Extensions with wobble-drive 94, 111, 126 Extensions, flexible 94, 111 Extractor pliers 306

Article

D D/E flexi joint spanners D/E open ended spanners D/E ring spanners Dinging hammer Display light unit Display stand for pliers Display stand for sockets 1/4HH, 3/8HH, 1/2HH sq. dr. Display tray Display units Dividers Dollies Double flaring tool DRALL screwdrivers Draw handle Drawer separator Drawers Drift pins Drive handle

Article

K KABELEX ejection tools Key wrenches

272–276 208–211

L Lever action side cutters Lever action top cutters Lever bar Light unit Locking adaptor Lubrication service tools

229 229 279, 280 257 95, 111 302, 303

Padlock 256 Panel beating tools 276–280 PC-cases, empty, for torque wrenches 170 PC-wallets, empty 68 Pecking hammers 276, 277 perfectControl calibrating unit 187 Perforated panel 20 Personal box 18 Phillips BITS 148, 153, 154 Phillips screwdrivers 202–206 Pincers 232 Pin punches 250, 251 Pin wrench 305 Pipe cutters 246, 305 Pipe cutter wheels 246 Pipe wrenches 224, 225 Planishing hammers 276, 277 Plastic faced hammers 248 Plastic lever bar 280 Plastic pipe shears 247 Plastic side cutters 241 Pliers 216–241 PowerGRIP pliers wrench 223 Pozidriv/Supadriv BITS 148, 153 Pozidriv/Supadriv screwdrivers 203, 204, 206 Precision feeler gauges 296 Pry bar 279 Pullers 264–267 Pull hook 306 Punch pliers 279

Article

Page

Q Quick-change BIT holder QuickRelease drive handle QuickRelease extensions 94, 111, QuickRelease ratchet insert tool QuickRelease ratchets 92, 93, 109, QuickRelease sliding T-handle 110, QuickRelease universal joint 94, 111,

152 93 126 177 125 94, 126 127

R Ratchet adaptor 110, 125, 134 Ratchet ring spanners 79, 80, 299 Ratchet spares 93, 110, 125, 134, 136, 182, 183 Ratchet tap holders 255 Ratchet wrenches 78, 79, 151 Ratcheting bit holder 79, 96, 151 Ratchets 92, 93, 96, 109, 110, 125, 134, 136, 151 RATCHFIX ratchets 110 Recoil-less hammers 248 Relay pliers 217 Replacement milling cutter 280 Ring insert tools for torque wrenches 179–181 Ring spanners – deep offset 73, 74 – open 78 – shallow offset 75, 76 – straight 76 – TORX® 77 Round nose pliers 218, 235, 238 Rubber composition hammer 248 Rubber inserts (for sockets) 104, 119, 298 Rubber rings (for sockets) 145–147 Rubbish bin 18

S Sales dispenser – for pliers 61 – for sockets 1/4HH, 3/8HH, 1/2HH 62 Scrapers 252, 256, 281 Screw extractors 254 Screw pitch gauge 254 Screwdrivers 200–212, 294 Screwdriver sockets 91, 92, 106, 122–124, 133, 134 Scriber 256 Self-grip wrenches 225–227 Sensotork 171, 172, 192 Separating fixture 266 Service MANOSKOP torque wrenches 166, 167

Article

Page

SERVOMAT socket dispenser 1/4–1/2HH Y 62 Set-off pliers 279 Set of reversible screwdrivers 207 Set of wheels 18 Shell tools for MANOSKOP torque wrenches 177–180 Side cutters 228, 229, 235, 236, 239–241 Single-end spanners, adjustable 82 Single O/E spanners 82 Slide hammers 266 Sliding heads 134, 136 Sliding T-handles 94, 110, 126 Small bore pipe cutter 246 Snipe nose pliers 219–221, 239 Sockets – 1/4HH Y 88–91 – 3/8HH Y 103–105 – 1/2HH Y 117–120 – 3/4HH Y 133 – 1HH Y 136 – multi-spline 295 – spline-drive 91, 105, 120 – 4 pin 310 Socket sets – 1/4HH Y 97–101 – 3/8HH Y 112–115 – 1/2HH Y 127–131 – 3/4HH Y 135 – 1HH Y 137 SoftGRIP 72 Software for calibration 194 Soldering gun 258 Soldering iron 258 Soldering wedges, wood 278 Spacing washers 246 Spare cutting wire 281 Spare parts for pipe cutters 246 Spare parts for ratchets 93, 110, 125, 134, 136, 182, 183 Spare plastic heads (for hammers) 248 Spare nylon heads 248 Spark plug brush 298 Spark plug connector pliers 298 Spark plug sockets 104, 298, 299 Special extensions 111, 127, 295 Special socket 154 Special tools for brakes and wheels 300–302 Special tools for carburettors 294, 295 Special tools for cars and trucks 272–311 Special tools for chassies 297 Special tools for engine and gear transmission 303–305 Special tools for HGVs 309–311 Special tools for ignition and electrics 298, 299 Special tools for lubrication service 302, 303 Special tools for pistons 295, 296 Special tools miscellaneous 305–308 Speeder braces 94, 110, 126 Spinner handles 150 Spinner with BITS magazine 150 Spiral cable 194 Spline drive combination spanners 75 Spline drive ratchet ring spanners 79 Spot weld drills 280

Article

Spot weld milling cutter Spray can and paper holder Spring clip Square drive adaptor Square lug Standard partitions for SERVOMAT Standard-MANOSKOP torque wrenches Steel fixers pincers Steel rule Stethoscope Stillson pipe wrenches Strap wrenches Striking face O/E spanners Striking face ring spanners Striking sockets Stud remover Suction lifter Swedish pattern wrenches

Page

280 18 21 194, 195 21

Article

U UNIFLEX-sockets Universal joints

62 168, 169 232 255 296 225 302 82 81 82 254, 255 280, 281 224

T Tape measure 255 Telescopic mirrors 257 Tension strap with ratchet 281 Testing tools for car electrics 299 Thread restorers 254 Thread taps 306 Three square bearing scraper 252 Three square scraper 252 Tin snips 279 Tommy bars 83 Tool boxes 16, 19 Tool cabinet 20 Tool cases 22 Tool displays 59–61 Tool holder 182 Tool magazines 11 Tool sets 22–59, 282–293 Tool trolleys 14–16 Tools for heater plugs 299 Top cutters 229, 237 Torches 258 TORQ-Set screwdriver 203 Torque angle gauges 182 Torque screwdrivers 174, 175 Torque test equipment 187–194 Torque wrenches 164–173 TORSIOMAX torque screwdriver 174 TORSIOMETER torque screwdriver 175 ® TORX -bits 148, 149, 153 TORX®-insert tools 180 TORX®-screwdrivers 200, 203–206, 211, 212 TORX®-sockets 90, 92, 105, 106, 119, 123, 124 Transducer 193 Trays, empty 138, 139 Tubular handles 81 Tubular hacksaw 253 Tweezers 259 Tyre levers 300, 309

Page

Universal knife USB adaptor

90, 91, 104, 105, 119, 299 95, 111, 127, 134, 145–147 258 165, 172, 194

V Valve adjustment tools 295, 296 VDE insulated pliers 238–240 VDE insulated screwdrivers 204 VERITRAC windscreen removal set 280 VERITRAC wind. replacement set 280 Vernier calliper 255 Voltage tester 207

W Wallets, empty Warding files Waterpump pliers Wheel braces Wheel hub puller Wheel nut sockets Wheely box Windscreen removal set, VERITRAC Windscreen replacement set, VERITRAC Wire brushes Wire cutter Wire insert awl Wire insert probe Wire stripping knife Wire stripping pliers Wire twisting pliers Work benches, mobile Workshop sets 22–26, Workshop torque tester SENSOTORK

68 255 223, 224 300, 309 266 145, 300 11 280 280 256, 301 259 281 281 258 230, 240 227 17 282–293 192

317

318

1.6

American Standard ANSI

square

heavy

machine screw nuts

normal

heavy

machine screws

square head set screws

Bolts and Screws

normal

nominal size of wrench

Nuts

Whitworth, small8) SMS 1415

Whitworth, large8) SMS 1413

metric, small8) SMS 1414

Swedish standard

metric, large8) SMS 1412

NFE 27-111-1930˜) 27-111-19308) NEF

French stand.

nut with flange6)

screw with flange5)

small hexagon4)

large hexagon3)

German standard DIN

normal hexagon2)

small hexagon

normal hexagon

nut with flange

1.6

screw with flange

3.2

large hexagon

standard hexagon

maximum dimension mm1)

3.28 3.35 3.60 4.14 4.12 4.62 4.95 5.12 5.33 5.62 5.72 6.13 6.15 6.53 6.97 7.15 7.32 7.77 8.18 8.15 8.56 8.97 9.15 9.75 10.19 10.55 11.19 11.33 12.14 12.24 12.95 13.24 13.77 14.27 14.55 15.27 15.36 16.15 16.27 16.95 17.30 17.75 18.30 19.36 19.38 20.17 20.36 20.98 21.16 21.36 22.36 22.56 23.36 24.21 24.36 24.99 25.36 25.78 26.48 27.48 27.36 28.48 29.01 29.48 30.48 30.59 32.18 32.48 33.48 33.81 34.48 35.60 35.41 36.60

ISO R 272 1968

DIN ISO 272

nominal size of wrench mm

minimum dimension mm1)

3.22 3.23 3.52 4.01 4.02 4.52 4.83 5.02 5.21 5.52 5.59 6.00 6.03 6.40 6.82 7.03 7.19 7.62 8.03 8.03 8.41 8.81 9.03 9.60 10.04 10.39 11.04 11.18 11.99 12.04 12.80 13.04 13.60 14.05 14.38 15.05 15.18 15.98 16.05 16.77 17.05 17.58 18.05 19.06 19.18 19.97 20.06 20.78 20.86 21.06 22.06 22.35 23.06 23.98 24.06 24.76 25.06 25.55 26.08 27.08 27.13 28.08 28.75 29.08 30.08 30.34 31.93 32.08 33.08 33.53 34.08 35.10 35.13 36.10

American sizes Thread Diameters

Metric sizes Thread Diameters

Spanner opening SW

1.6 1/8

No 1,2 + 3

3.5 2.5 4 4.5

2.5

5.5

5/32

No 0 + 1

3/16

No 2 + 3

2.3 2.6 3

No 3,4 +5 No 10

3 13/64 7/32 15/64

3.5

3.5 1/4 17/64

4 + 4.5

(5)\K

5.5 8

3.5

No 4

No 6 + 8

[

No 10 +12

fiß!&

[

#ß(

4 9/32 19/64 5/16

No 5 + 6

21/64 11/32

No 8

3/8

No 10

No12+[

[

No 10*

6 13/32

12 13

8 8

7 8

[

7/16 15/32

[

1/2

fiß!&

[

\ß!&

8 [

[

fiß!&

#ß(

·ß!&

#ß(

\ß!&

fiß(

}

fiß!& 17/32

10 (8)\K

8 9/16

fiß!&

#ß(

19/32 5/8 16

SP: M10+M14 10 SP:M10+M14

fiß!&

#ß( #ß(

21/32 17 18 19

SP: M M12 12 SP: 12 14

12 (10)

(12)

12 14 (12)

16 14 (16)

10 12

#ß(

11/16

\ß!&

3/4 25/32

#ß(

\ß!&

11 \ß!&

\ß!&

20 |

13/16 SP: M14+M18 20.8 SP:M14+M18 21 14 12 16 14 22

14 12 16 (14) 12

7/8

·ß!&

15/16

fiß(

·ß!&

\ß(

14 16

\ß!&

12 + 14

23 24

·ß!&

fiß(

31/32 25 fiß(

1 26 27

SP: M M18 SP: 18

18 fiß(

1 1/16 fiß(

fiß(

} 1 1/8

29 30

}

1@ß(

18 20

1 3/16 1 1/4 32 33

24 (22) 20

18+20

} 22

}

\ß( 1 5/16

34 35

}

22 \ß(

\ß(

20 22

1 3/8 22

22+24

1#ß(

Metric sizes Thread Diameters

\ß(

37 38

heavy

machine screws

square head set screws

\ß(

1HH 1HH

1HH

1 5/8 1HH

1HH

1@ß(

1 13/16 1@ß( 33

1@ß(

33 2HH

1#ß( 2 1/16

1HH

1[ 1 7/8

47 33

1HH

1@ß( 1 11/16 1@ß( 1 3/4

\ß(

24 1 1/2 1 9/16

normal

machine screw nuts

square

Bolts and Screws

heavy

normal

nominal size of wrench

Nuts

Whitworth, small8) SMS 1415

Whitworth, large8) SMS 1413

metric, small8) SMS 1414

metric, large8) SMS 1412

NFE 27-111-1930˜) 27-111-19308) NFE

American Standard ANSI

Swedish standard

1 7/16

1#ß(

36 2 1/8

36 2 3/16

1#ß(

1| 2 1/4

58 60

39 39

1fiß( 2 3/8 2 7/16

42 2 1/2

67 70

1fiß(

1} 2 9/16 2 5/8

1fiß(

2 3/4

2 13/16 2 15/16

1\ß(

45 1}

1\ß(

2HH 3HH

2HH

52 3 1/8

80 82 85

2HH

3 3/8

100 105

2HH

88 90 94 95

60 60

3 1/2

3 3/4 3 7/8

4 1/8 4 1/4

68 72

110

115 116

120

2} 2}

80 85

68 72

4 1/2

) maximum and minimum dimensions for metric sizes according to DIN 475/2 series 1 and ISO 691 (machined tolerances), American sizes according to ANSI B 18.2.1 + ASME/ANSI B 18.2.2 2 ) DIN ISO 4014, 4016, 4017, 4018, 4032, 4034, 4035, 4036, 8673, 8674, 8675, 8676, 8765, sizes in brackets only DIN 439, 555, 558, 601, 609, 610, 917, 931, 933, 934, 935, 936, 937, 960, 961, 979, 980, 985, 986, 1587, 2510/5, 6330, 6331, 7967, 7968, 7990 3 ) DIN 6914, 6915, 7999 (SW 21 + 34) 4 ) DIN 561, 564 5 ) DIN 6921, 6922 6 ) DIN 6923, 6926, 6927 7 ) Standards prior to 1963 8 ) old standards SP = Spark Plug

French stand.

nut with flange6)

screw with flange5)

small hexagon4)

large hexagon3)

standard hexagon2)

small hexagon

standard hexagon

nut with flange

screw with flange

large hexagon

standard hexagon

nominal size of wrench mm

German standard DIN

a) Hex Hex Hex Hex Hex Hex

Flat and Hex Flat Jam Nuts Nuts and Hex Jam Nuts Slotted Nuts Thick Nuts Thick Slotted Nuts Castle Nuts

b) Square Nuts c) Heavy Heavy Heavy Heavy Heavy Heavy

Square Nuts Hex Flat Nuts Hex Flat Jam Nuts Hex Nuts Hex Jam Nuts Hex Slotted Nuts

4 5/8

3HH

d) ANSI B 18.6.3 – 1972 e) Square Bolts Hex Bolts Hex Cap Screws Lag Screws f) Heavy Hex Bolts Heavy Hex Structural Bolts Heavy Hex Screws g) ANSI B 18.6.3 – 1972 (R 1983)

ANSIBB18.2.1 18.2.1–1981 ANSI – 1981

37.01 37.60 38.60 38.61 40.20 41.60 41.81 42.60 42.93 43.38 45.03 46.60 46.61 47.60 48.21 50.60 51.44 52.60 53.04 54.72 54.61 55.72 56.26 56.72 57.84 58.72 60.72 61.06 62.64 63.72 64.24 65.72 65.86 67.46 67.72 70.72 70.69 71.72 72.26 75.51 75.85 77.09 77.85 80.31 80.85 82.85 85.85 86.72 88.85 89.92 90.85 94.85 95.85 96.34 99.52 100.85 106.00 105.97 109.14 111.00 115.57 116.00 117.00 118.77 121.00

ISO R 272 1968

DIN ISO 272

American sizes Thread Diameters

ASME/ANSI ASME/ANSIB 18.2.2–1987 18.2.2 – 1987

36.73 37.10 38.10 38.30 39.89 41.10 41.50 42.10 42.67 43.08 44.70 46.10 46.28 47.10 47.88 50.10 51.08 52.10 52.68 54.12 54.25 55.12 55.88 56.12 57.45 58.12 60.12 60.66 62.23 63.12 63.83 65.12 65.43 67.03 67.12 70.12 70.26 71.12 71.81 75.03 75.15 76.61 77.15 79.81 80.15 82.15 85.15 86.18 88.15 89.36 90.15 94.15 95.15 95.76 98.93 100.15 105.20 105.33 108.51 110.20 114.91 115.20 116.20 118.08 120.20

maximum dimension mm1)

minimum dimension mm1)

Spanner opening SW

h) ANSI B 18.6.2 – 1972 (R 1983) * Square Bolt and Lag Screws only

319

Symbols used throughout this catalogue

Spanner Opening

B C D a b E F G J

Spanner Opening for Hexagon Socket Head Screws TORX® size in mm

m n o

Pictogram for Trisquare Socket Head Screws for Inside TORX® Screws for Inside TORX® Screws with hollow drive tip

Special Tools for Carburettor, Fuel Injection Systems Valves, Pistons

Outside Square for 5-star screws Inside Square Inside Hexagon

Pipe Diameter, outside Size of Insert Tool Carrier in mm (MANOSKOP®) (Inside Square)

Size of Shell Tool Carrier in mm (MANOSKOP®) (Outside Square)

Open Ring Spanner, hexagon

Open Ring Spanner, bi-hexagon

Chassies, Steering

Y registered trademark of

Fa. Acument Intellectual Properties, LLC, Rockford, Illinois, USA STAHLWILLE holds the Manufacturing Licence for TORX® Tools

Outside Hexagon Pipe Diameter, inside

for Outside TORX® Screws

q r s t

Car Bodies

for Spline Socket Head Screws Ribe-CV® registered trademark of Richard Bergner GmbH & Co. for Slotted Head Screws for TRI-WING® Screws registered trademark of Phillips Screw Company

Ignition, Electric, Electronic Brakes, Wheels

Lubrication Service

TORQ-SET®

Screws for registered trademark of Phillips Screw Company

Engine, Drive train

Diameter in mm

Socket, hexagon

Anti-Slip-drive

Socket, bi-hexagon

High-Performance-Quality

Socket, hexagon, AS-drive

Scale Range

Scale Division

Weight

Standard Pack (pieces)

Tel.: +49 202 4791-0 Fax: +49 202 4791-355 export@stahlwille.de www.stahlwille.de

full flush cutting

WEEE-Reg.-Nr. DE 70431151

semi flush cutting

We reserve the right to alter dimensional details in order to carry out improvements.

Socket, bi-hexagon, AS-drive

Socket, bi-square

h i

Socket, spline-drive

j k

for Socket Head Screw, hexagon with guide pin

for POZIDRIV/SUPADRIV® Screws

320

for Socket Head Screw, hexagon

for Phillips-Recessed head Screws Phillips-Recess®, registered trademark of Phillips Screw Company

POZIDRIV/SUPADRIV® registered trademark of European Industrial Services Ltd.

L M N T

Other Tools

Eduard Wille GmbH & Co. KG Lindenallee 27 P.O. Box 12 01 03 42331 Wuppertal Germany

standard bevel

All photographs used in this catalogue represent the tools as closely as possible to their natural appearance. Model changes may take place without prior notice as in the case of design improvements.

Safety insulated as per IEC 900 – AC 1000 V

= new items

Printed in Germany – Copyright by Eduard Wille GmbH & Co. KG, Wuppertal

www.stahlwille.de P.O.Box 12 01 03 42331 Wuppertal Germany Tel.: +49 202 4791-0 Fax: +49 202 4791-355 export@stahlwille.de www.stahlwille.de

Programme 2012

EDUARD WILLE GmbH & Co. KG

Programme 2012