Accessory for Taurus Series Riveting Tools : Nose Extension Units (Valid as from April 2004) 1.
Purpose
The nose extension units are used to reach recessed riveting locations. Two different lengthes are available for all Taurus tools : A 50 mm (2“) extension and a 100 mm (4“) extension.
Taurus 1 Taurus 1
Nose Extension Unit 50 mm Nose Extension Unit 100 mm
P/N : 756 2013 P/N : 756 2015
Taurus 2 Taurus 2
Nose Extension Unit 50 mm Nose Extension Unit 100 mm
P/N : 757 1016 P/N : 757 1019
Warning : New ! for Taurus 3 only : As from April 2004, a new shcok absorption system has been introduced into the TAURUS 3 (see also product information 04/097/04 dated 17.03.2004). This requires an adaptation of the nose extension unit to the shock absorption system. These new TAURUS 3 nose extension units retain the same part number as the old ones : Taurus 3 Taurus 3
Nose Extension Unit 50 mm Nose Extension Unit 100 mm
P/N 758 1021 P/N 758 1023
Older Taurus 3 tools without shock absorption system (before April 2004) which need to be equipped with a nose extension unit M-U-S-T be retrofitted with the shock absorption system, which is composed of following parts : Jaw Housing 4 Jaw Pusher 4 Absorber ring 4 Centre section 4
P/N 759 1009 P/N 759 1007 P/N 759 1004 P/N 759 1008
GESIPA Blindniettechnik GmbH * D-64546 Mörfelden-Walldorf * Nordendstr. 13-39