Figure 24 Dimensions of Sunpower PV panel

from Group Report: Building Analysis_Part 2

References

Figure 24 Dimensions of Sunpower PV panel

Thus, a total number of 644 PV panels can be installed on the roof. This gives the total 341MWh of energy that can be generated.

As the total building electricity consumption is lower than the electricity that could be generated by PV solar cells, the energy consumed by the building could be completely supplied by the renewable energy produced:

235.2 MWh < 341 MWh

Figure 24 Dimensions of Sunpower PV panel

Next Article

References

Figure 24 Dimensions of Sunpower PV panel

More articles from this publication:

References

Table 17 CO2 sensor

Figure 21 Control schematic diagram of VRF system 1

Table 16 Pressure sensors

Figure 18 Schematics of index runs

Figure 8 VRF separation tubes and headers

Figure 9 Example of simple extract-and-supply ventilation system with heat recovery

Figure 13 Specifications of outside condenser units provided by Fujitsu

Figure 2 Office building dimensions for the maximum potential VRF system pipework

This article is from:

Group Report: Building Analysis_Part 2