Rinker Residence CD Set with Nava Companies by Joseph Yu

ABBREVIATIONS

3'-0" Min 1'-6" 1'-6"

1. General: all work to be completed in accordance with the new york city building code, article 19, and regulations of all other agenies having jurisdiction. 2. Means of egress: all existing means of egress for tenants of the building to be maintained clear and free of all obstructions, such as building materials, tools, etc. 3. Fire safety: a. All building materials which are stored at the site or any area of the building are to be stored in a locked area. access to the area to be controlled by the owner, or the general contractor. b. All materials to be stored in a orderly fashion. c. All flammable materials to be kept tightly sealed in their respective manutacturers' containers. such materials are to be kept away from heat. d. All flammable materials to be used and stored in an adequately ventilated space. e. All electrical power to be shut off where there are exposed conduits. f. All electrical power in the construction area to be shut off after working hours. g. Contractor, at all times, to ensure there is no natural gas leakage in the buildings, or any flammable gas to be used during construction. 4. Dust control: a. Debris, dirt and dust to be kept to a minimum and confined to the immediate constuction area. b. Contractor to isolate construction area from occupied building area by means of temporary partitions or heavy weight drop cloths. c. Debris, dirt, and dust to be cleaned up and cleared from the building site periodically to avoid excessive accumulation. 5. Noise after hours: a. Construction operations will be confined to normal working hours, as stipulated in the alteration agreement. b. Contractor must obtain written permission from all affected parties to work other than regular hours. 6. Construction operations will not involve interruption of heating, water, or electrical services to other tenants. 7. Construction work will be confined to the apartment interior, and will not create dust, dirt, or other such inconveniences to the other apartment units within the building.

ZONING ANALYSIS

3'-0" Min 1'-6" 1'-6"

3'-6" Min

2'-6" Min

SIDE

4'-8" Min

5'-6" Min

3'-0"

LAV Clear Floor Space

Clear Floor Space

BLOCK: LOT: ZONING MAP: ZONING DISTRICT:

Nava Companies

1546 7501 9A R8B

31 Union Square West, Suite 2D New York, NY 10003, USA Tel: 212.365.1052 www.navacompanies.com

Clear Floor Space

AREA CALCULATIONS 4'-0" Min

4'-0" Min

5'-0" Min

Mechanical Engineer:

5'-0" SHOWER SIZES AND CLEARANCES

CLEAR FLOOR SPACE FOR ADAPTABLE BATHROOMS

LOT AREA:

2043.4 SF N

RESIDENTIAL FLOOR AREA RATIO MAX F.A.R. MAX F.A.R.

Note: Cross hatched areas to receive blocking for securing grab bars

3.69 2043.4 x 3.69 = 7540.15 SF

3'-0" Max 1'-0"1'-0" Min Min

STANDARD SYMBOLS

Structural Engineer:

INTERIOR ELEVATION 2/A00.01

19" Max 4'-0" Min

TOILET PAPER DISPENSER LOCATION

D'Antonio Consulting Engineers, P.C. 30 West Waukena Avenue Oceanside, NY 11572, USA 576.594.4284

APPROXIMATE BUILT SQUARE FOOTAGE:

(B) BACK WALL

(A) SIDE WALL

BLOCK: 1546 LOT: 7501 ZONING MAP: 9A ZONING DISTRICT: R8B

17" Min 2'-6" Min

1'-7" Min

RESIDENTIAL GROSS AREA

2'-8" Min 3'-2" Max

GENERAL NOTES:

CLEAR FLOOR SPACE AT LAVATORIES

REINFORCING AREAS FOR INSTALLATION OF GRAB BARS IN BATHROOMS

GROUND FLOOR (RESIDENTIAL UNIT 1): FIRST FLOOR (RESIDENTIAL UNIT 1): SECOND FLOOR (RESIDENTIAL UNIT 2): THIRD FLOOR (RESIDENTIAL UNIT 3):

1180 SF 1180 SF 800 SF 800 SF

TOTAL RESIDENTIAL FLOOR AREA:

3960 SF

Robert Silman Associates 32 Old Slip, 10th Floor New York, NY 10005, USA 212.420.7970

###

INTERIOR ELEVATION

Key Plan:

EXTERIOR ELEVATION

PROPOSED BUILDING ADDITION: X = 0"-25"

2'-1" Max

40" Max 29" Min 27" Min 9" Min

Y = 48"

2'-6"

Note: Dashed line indicates dimensional clearances of optional underlavatory enclosure

X 4'-0"

Z=X OR GREATER

GROUND FLOOR (RESIDENTIAL UNIT 1): FIRST FLOOR (RESIDENTIAL UNIT 1): SECOND FLOOR (RESIDENTIAL UNIT 2): THIRD FLOOR (RESIDENTIAL UNIT 2): FOURTH FLOOR (RESIDENTIAL UNIT 2):

1180 SF 1180 SF 800 SF 800 SF 800 SF

TOTAL RESIDENTIAL FLOOR AREA:

4760 SF

MAX ALLOWABLE RESIDENTIAL FLOOR AREA = 7540.15 SF > 4760 SF = OK

Note: X = Reach Distance, Y = Maximum Height, Z = Clear Knee Space. Z is the clear space below the obstruction, which shall be at least as deep as the reach distance

MAXIMUM FORWARD REACH OVER AN OBSTRUCTION

ROOMNAME

SPACE DESIGNATION

REVISION DESIGNATION

Legend:

WINDOW DESIGNATION

Notification:

LAVATORY CLEARANCES

DOOR

DOOR DESIGNATION

HEIGHT REQUIREMENTS

28" - 36"

DEMOLITION NOTES 1. Provide selective demolition work as shown and as needed for a complete and proper installation of the work. 2. Contractor to perform selective demolition in a systematic manner. Use such methods as required to complete work indicated in accordance with demolition schedule and governing regulations; comply with new york city building code and regulations of the building. 3. Remove all items necessary to accommodate the new construction. 4. Remove salvageable items as noted for reuse with care to prevent damage. Store in a protected area where directed by the owner. 5. Repair and restore all permanent materials damaged during the demolition process or other construction activity. 6. Remove debris, rubbish and other non-salvageable materials resulting from demolition operations from the site. 7. Demolish and remove all existing partitions, doors, walls, floor coverings and ceilings as noted and/or keyed. 8. Demolish and remove all plumbing lines, fixtures and equipment as noted and/or keyed. All branchwork plumbing to be removed back to the riser. 9. Demolish and remove all existng electrical, telephone and computer wiring, devices, conduits and black boxes back to existing panels as noted and/or keyed. 10. Demolish all soffits, dropped ceilings including pencil rod and chicago bar or other furring materials. 11. Demolish all electrical points, including jboxes, terminations, cabling and switch controls. 12. Demolish all recessed light fixtures, sconces, cabinetry lighting and track lighting. 13. Demolish all air conditoning equipment including condensor units, air handlers, controls, and all duct work and grills. 14. All gas branch work to be demolished back to riser. New shut off valves to be installed. 15. All water, waste and venting branch work to be demolished back to riser locations. New shutoff valves to be installed throughout.

SUGGESTED FLEXIBLE SUPPLY LINES

MIN. BASE HEIGHT MAX. BASE HEIGHT

SUGGESTED SLIP JOINT IN TAIL PIECE

REQUIRED

PROPOSED

55 FT 60 FT

55 FT

DRAWING LABEL Scale: SCALE: ACTUAL SIZE

COPYRIGHT NOTICE: THESE PLANS ARE COPYRIGHTED AND ARE SUBJECT TO COPYRIGHT PROTECTION AS AN 'ARCHITECTURAL WORK' UNDER SECTION 102 OF THE COPYRIGHT ACT 17 U.S.O. AS MENTIONED DECEMBER 1990 AND KNOWN AS ARCHITECTURAL WORKS PROTECTION ACT OF 1990. THE PROTECTION INCLUDES BUT IS NOT LIMITED TO THE OVERALL FORM AS WELL AS THE ARRANGEMENT AND COMPOSITION OF SPACES AND ELEMENTS OF THE DESIGN. UNDER SUCH PROTECTION, UNAUTHORIZED USE OF THESE PLANS, WORK, OR BUILDING REPRESENTED CAN LEGALLY RESULT IN CESSATION OF CONSTRUCTION OR BUILDING BEING SEIZED AND/OR MONETARY COMPENSATION TO: NAVA COMPANIES LLC THIS PLAN IS SUBMITTED ONLY FOR WORK INDICATED ON THE APPLICATION SPECIFICATION SHEET. ALL OTHER MATTERS ARE NOT TO BE RELIED UPON OR TO BE CONSIDERED AS EITHER BEING APPROVED OF OR IN ACCORDANCE WITH APPLICABLE CODES.

Issue Description

Date

ISSUE

MAX BLDG. HEIGHT

2'-6" Min BEFORE REMOVAL OF CABINETS AND BASE

75 FT

55 FT NO CHANGE OF USE, OCCUPANCY AND EGRESS

4'-0" Max

28" - 36" Max

CABINETS AND BASE REMOVED AND HEIGHT ALTERNATIVES

Date

Revision

SMOKE DETECTOR/CARBON MONOXIDE NOTES

2'-6" Min CABINETS AND BASE REMOVED AND HEIGHT ALTERNATIVES

BEFORE REMOVAL OF CABINETS AND BASE

LIST OF DRAWINGS

MEP AND STRUCTURAL DRAWINGS:

RINKER RESIDENCE 344 E 84TH STREET NEW YORK, NY 10028

LOCATION OF GRAB BAR REINFORCEMENTS AND CONTROLS OF ADAPTABLE SHOWERS

GENERAL NOTES Seal & Signature: 6" Max 2'-0"

Date: 5/26/2016 Project Number:

9" 5'-0" Max Min

Drawing: Checked:

6" Max

GENERAL NOTES GROUND & SECOND FLOOR DEMO PLAN THIRD & FORTH FLOOR DEMO PLAN FIRST & SECOND FLOOR CONSTRUCTION PLAN THIRD AND FORTH FLOOR CONSTRUCTION PLAN ROOF CONSTRUCTION PLAN AND WALL TYPES SECOND & THIRD FLOOR RCP & POWER PLAN FOURTH FLOOR AND ROOF RCP & POWER PLAN SCHEDULES SCHEDULES ELEVATION

Project Title:

Floor Number:

ARCHITECTURAL DRAWINGS: T-001.00 A-001.00 A-002.00 A-003.00 A-004.00 A-005.00 A-006.00 A-007.00 A-008.00 A-009.00 A-010.00

6" Min 32" Max

4'-0" Max

6" Min

2'-3" Max

32" Max

6" Min

Note: Shower head and control area may be on back wall or on either side

32" Max

1. Smoke/Carbon Monoxide detectors or devices shall be installed in ordinance with the Housing Maintenance Code, Multiple Dwelling Law the New York City Building Code the New York City Electrical Code and LL 7/04. 2. Smoke Detectors and Carbon Monoxide Detectors may be combined providing the devices comply with the provisions of title 27 of the administrative code of the city of New York and any applicable rules promulgated thereunder. 3. Each Smoke/Carbon Monoxide Detector shall be installed in accordance with Reference Standard 17-12 of the New York City Building Code. 4. Each Smoke/Carbon Monoxide Detector shall be installed outside of each sleeping room in the immediate vicinity or within 10-0" of the entrance to a sleeping room. 5. Each Smoke/Carbon Monoxide Detector shall be of a type that allows for readily testing of such device. 6. Duplex units shall have a device located on each level if only one means of egress is provided from each level. 7. Ceiling mounted devices shall be a minimum distance of 4" from any wall. 8. Wall mounted devices shall be a minimum of 4" to a maximum of 12" from the ceiling. 9. Each dwelling unit shall be equipped with an approved type smoke/carbon monoxide detector device receiving primary power from the building wiring with no switches in the circuit other than the over current device protecting the branch circuit as per New York City Building Code Sec. 27-980. 10. Existing buildings that are not equipped with hardwired connections shall be supplied with battery operated devices. 11. Such smoke/carbon monoxide detector must be either the ionization chamber type or the photoelectric detector type as per New York City Building Code Sec. 27-981, (b). 12. A "Certificate of Satisfactory Installation for Smoke/Carbon Monoxide Detectors" must be filed with the division of code enforcement H.P.D., 10 days after installation. 13. Written information of testing and maintenance of the devices shall be provided to the dwelling unit owner.

Drawing Number:

3'-2" 2'-8"

TR8: HVAC SERVICE WATER HEATING EQUIPMENT HVAC SERVICE WATER HEATING SYSTEMS DUCT AND PIPING INSULATION ELECTRICAL METERING LIGHTING AND DWELLING UNITS INTERIOR LIGHTING POWER LIGHTING CONTROLS

2'-3" Max

ZONING INFORMATION

4'-6" Min 1'-0" Max 3'-6" Min

1. The general conditions of the American Institute of Architects for the contract of the construction of interiors, latest edition, is hereby made a part of this contract as if they were printed herein in full. 2. The contractor shall provide owner with all applicable certificates of insurance, liability and workman's compensation as required by law and building regulations. 3. The contractor shall take all necessary precautions to protect the owner, tenants and job site from damage or fire. 4. The contractor shall inspect the job site to verify all conditions, measurements and job requirements and shall report any inconsistencies to the architect immediately. 5. The contractor shall furnish all labor, materials, equipment, and services required to perform a finished job and for the proper completion of all trades whether or not such items are expressly mentioned in the contract documents. 6. The contractor shall coordinate the work of all trades and cooperate with the the work of all trades whether or not part of this contract. 7. All work performed must comply with all current rules and regulations of all municipal agencies having jurisdiction over this work and with all department of building rules and the rules of the particular building in which the work is located. 8. The job site shall be kept broom clean at all times. upon completion of the work the contractor shall provide a broom clean space, free of all dust and debris. 9. The owner's signature must be obtained prior to ordering any materials or executing any work in excess of the original contract. 10. All work shall comply with current trade practices and conform to the standards of good workmanship. 11. The contractor shall cause the owner and architect and their agents to be held harmless from all liabilities resulting from any and all situations resulting from this work. 12. The contractor shall maintain a complete and up to date set of drawings on the job site at all times. 13. The contractor shall prepare and submit shop drawings to the architect for approval. Contractor shall inspect shop drawings prior to submission and no material shall be ordered prior to approval of shop drawings. 14. The contractor shall protect all property from damage. Any damage caused by the contractor's workmen or sub-contractor's workmen shall be repaired or replaced at no cost to the owner. 15. Contractor shall coordinate the work of all trades and shall cooperate with all trades not specifically part of this contract. 16. Contractor shall submit samples to the architect of all finishes of hardware, wood, switch plates, stone, tile, etc., for approval, prior to ordering. 17. Contractor shall be responsible for arranging with building management for elevators and/or other hoisting facilities for the handling of materials and shall bear all costs for same. 18. Tenant shall, through its building code consultant, arrange for drawings to be filed with the building department in the municipality having jurisdiction over the work, and for final sign-off. Contractor shall obtain permits and all other licenses and sign-offs required and shall bear all costs for same. 19. General contractor shall properly protect the owner and any adjacent property or work. Any damage to the same caused by contractor's workmen or subcontractor's workmen shall be repaired or replaced without delay. Patching and replacing of damaged work shall be done by general contractor. General contractor shall provide all necessary protection for the work until same is turned over to the client. 20. Shareholder is responsible for all elec. radiant heat 21. No solenoids or restrictions on the building HVAC/fan coil units. 22. All cabinetry to be removable

1'-6"

TR1: FIRE STOP/DRAFT STOP/FIRE BLOCK MECHANICAL VENTILATION FINAL ENERGY CODE COMPLIANCE

Architect:

TENANT SAFETY NOTES: RENOVATION IN RESIDENTIAL BUILDING:

Note: Cross hatched areas to receive blocking for securing grab bars

CONTROLLED INSPECTIONS

PLOT PLAN (NTS)

AIR CONDITIONING ADJUSTABLE ABOVE FINISH FLOOR ALUMINUM AS NOTED ARCHITECT ACOUSTIC TILE CEILING BUILDING BY OTHERS BUILDING STANDARD CABINET CABINET CONTRACTOR CENTERLINE CLOSET CEILING COLUMN CONCRETE CONTINUOUS CARPET CERAMIC TILE DOWN DOOR DETAIL DRAWING ELEVATION ELECTRIC EQUAL EXISTING TO BE RELOCATED ELECTRIC WATER COOLER EXISTING FURNISH & INSTALL FINISH FULL HEIGHT FLOOR FINISH OPENING FIREPROOF FIREPROOF SELF CLOSING FIRE RATED FRAME FLUSH VALVE GAUGE GALVANIZED GENERAL CONTRACTOR GLASS GYPSUM WALL BOARD HOLLOW METAL HOLD OPEN HOUR HEIGHT HEATING/VENTILATION INSULATION INTERIOR INSTALL ONLY JANITOR CLOSET JUNCTION BOX JAMB OPENING JOINT LAVATORY LIGHTING MAXIMUM MINIMUM MECHANICAL MANUFACTURER MASONRY OPENING METAL NO HOLD OPENING NOT IN CONTRACT NUMBER NOT TO SCALE ON CENTER OPENING OPPOSITE PLATE PLASTIC LAMINATE PLUMBING PLYWOOD PANEL POLISHED PAIR PAINT QUARRY TILE RADIUS REFLECTED REINFORCE REQUIRED ROOM SEPARATE CIRCUIT SIMILAR STAINLESS STEEL SPECIFICATION SPEAKER SPRINKLER SQUARE STANDARD STEEL STRUCTURAL TELEPHONE TRIMMED OPENING TYPICAL UNLESS OTHERWISE NOTED VERIFY IN FIELD VINYL TILE WITH WOOD

THERE IS NO CHANGE OF USE, EGRESS, OR OCCUPANCY UNDER THIS APPLICATION

A/C ADJ AFF ALUM AN ARCH ATC BLDG BO BS CAB CABC CL CLOS CLG COL CONC CONT CPT CT DN DR DTL DWG EL ELEC EQ ER EWC EXTG F/I FIN FH FLR FO FP FPSC FR FRM FV GA GALV GC GL GWB HM HO HR HT HVAC INSUL INT I/O JAN CL JB JO JT LAV LTG MAX MIN MECH MRF MO MTL NHO NIC NO NTS OC OPNG OPP PL PLLA PLMB PLY PNL POL PR PT QT RAD REF REINF REQ'D RM SC SIM STNSTL SPEC SPKR SPR SQ STD STL STR TEL TO TYP UON VIF VT W/ WD

GENERAL NOTES

T-001.00 FOOT

BACK Note: Cross hatched areas to receive blocking for securing grab bars

LOCATION OF GRAB BAR REINFORCEMENTS AND CONTROLS OF ADAPTABLE BATHTUBS

HEAD

0440

Architect:

GENERAL DEMOLITION NOTES: VERIFY EXISTING CONDITIONS PRIOR TO THE COMMENCEMENT OF WORK AND NOTIFY THE ARCHITECT OF ANY DISCREPANCIES OR UNUSUAL CONDITIONS PHASE ALL WORK TO ACHIEVE THE MINIMUM DISTURBANCE IN WORK AREAS; PROTECT UNAFFECTED AREAS FROM DUST DIRT AND NOISE

Nava Companies 31 Union Square West, Suite 2D New York, NY 10003, USA

REMOVE ALL DEBRIS FROM THE SITE AND DISPOSE OF IN A MANNER APPROVED BY ALL LOCAL, STATE, AND FEDERAL REGULATIONS. PERFORM ALL DEMOLITION AND CARTING IN ACCORDANCE WITH THE BUILDING RULES AND REGULATIONS. BROOM SWEEP ALL PREMISES AND PUBLIC SPACES ON A DAILY BASIS.

Tel: 212.365.1052 www.navacompanies.com Mechanical Engineer: D'Antonio Consulting Engineers, P.C. 30 West Waukena Avenue Oceanside, NY 11572, USA 576.594.4284

SALVAGE EQUIPMENT, FIXTURES AND DOORS AS REQUIRED BY THE CONTRACT DOCUMENTS. REUSE AS DIRECTED ON DRAWINGS AND IN SCHEDULES. SALVAGE SPECIFIED DOORS AND ATTACHED HARDWARE FOR COURSE OF JOB. REMOVE THOSE NOT REUSED AT END OF JOB AS DIRECTED BY OWNER. SEE DOOR SCHEDULE FOR THOSE SALVAGED AND RELOCATED.

Structural Engineer: Robert Silman Associates 32 Old Slip, 10th Floor New York, NY 10005, USA 212.420.7970

REMOVE ALL MISCELLANEOUS ATTACHMENTS TO WALLS, FLOORS, CEILINGS, WINDOWS, AND DOORS INCLUDING, BUT NOT LIMITED TO, NAILS, HOOKS, WIRES, DOORBELLS, AND STOPS.

Key Plan:

SHUT OFF ALL EXISTING PLUMBING HOOK-UPS IMMEDIATELY PRIOR TO DEMOLITION WORK AT EACH LOCATION.

REMOVE EXISTING FLOORING INCLUDING WOOD FLOOR, SADDLES, CARPET, TILE, STONE AND ALL SUB-FLOOR MATERIAL INCLUDING SLAB TOPPING. SALVAGE/ PRESERVE (E) WOOD FLOOR AS NOTED)

RESTORE TO VALUES SPECIFIED IN APPLICABLE CODES THE INTEGRITY OF EXISTING RATED PARTITIONS AND THE FIRE PROTECTION OF STRUCTURAL MEMBERS THAT ARE DAMAGED DURING CONSTRUCTION.

GROUND FLOOR DEMOLITION PLAN Scale: 1/4" = 1'0"

Legend: LEAVE AND PROTECT (E) WOOD FLOOR FOR REFINISHING

LEAVE AND PROTECT (E) WOOD FLOOR FOR REFINISHING

DEMOLISH (E) WINDOWS AND PORTION OF EXTERIOR WALL

DEMOLISH AND REMOVE (E) DECKING & SLEEPERS

PROVIDE A MINIMUM OF TWO (2) FIRE EXTINGUISHERS OR MORE AS REQUIRED BY NYC DOB. Notification:

REMOVE ALL PARTITION WALLS, MILLWORK, DOORS, DOOR CASINGS, WINDOW CASINGS, DECORATIVE FINISHES, SHELVING AS INDICATED.

REMOVE ALL EXISTING CONSTRUCTION LOCATED IN A MANNER SO AS NOT TO CONFLICT WITH WORK SHOWN ON OTHER DRAWINGS. REMOVE AND REPLACE ANY OTHER CONSTRUCTION OUTSIDE LIMITS SHOWN, AS NECESSARY TO COMPLETE THE WORK.

DEMOLISH AND REPLACE (E) WINDOW

Issue Description ISSUE

BRING ALL DEMOLITION AND REMOVAL TO A NATURAL STOPPING POINT. REPLACE ANY MATERIAL REMOVED BY MISTAKE OR IN EXCESS OF REQUIREMENTS. WHERE ALTERATIONS OCCUR OR NEW AND OLD WORK JOIN, CUT, REMOVE, PATCH, REPAIR, OR REFINISH THE ADJACENT SURFACES, AND REMOVE EXISTING WORK TO PROFILES SHOWN FOR NEW WORK SO AS TO LEAVE IN AS GOOD A CONDITION AS EXISTED PRIOR TO COMMENCING OF WORK. PROTECT ALL FINISHES TO REMAIN.

Date

LIVING

DINING

TERRACE

DEMOLISH AND REPLACE (E) WINDOW

HALL

PROTECT PUBLIC CORRIDORS AND SPACES FROM DAMAGE.

DEMOLISH AND REPLACE (E) WINDOW OFFICE

DEMOLISH AND REPLACE (E) WINDOW

KITCHEN

Date

Revision

DISCONNECT AND REMOVE ALL EXISTING LIGHTING, ELECTRICAL BOXES, TELEPHONE EQUIPMENT, ELECTRICAL TERMINATIONS. SEE DEMOLITION AND ELECTRICAL NOTES FOR ADDITIONAL SAFETY REQUIREMENTS AND TEMPORARY LIGHTING REQUIREMENTS.

SECOND FLOOR DEMOLITION PLAN Scale: 1/4" = 1'0" Project Title:

RINKER RESIDENCE

REMOVE EXISTING RADIATOR ENCLOSURE AND HVAC EQUIPMENT INCLUDING ATTACHED DEVICES, DUCTING, GRILLS, CONDENSORS, AIR HANDLERS, PACKAGE UNITS DISCONNECT AND REMOVE ALL PLUMBING FIXTURES AND ASSOCIATED BRANCH PIPING AND CAP AT PLUMBING STACK LOCATIONS. SEE PLUMBING NOTES FOR ADDITIONAL REQUIREMENTS REDUCE CHASE SIZE AT ALL LOCATION OF BUILDING PLUMBING RISERS TO A MINIMUM. EXPOSE ALL RISERS FOR INSPECTION BY ARCHITECT AND BUILDING MANAGEMENT DEMISING WALLS, STRUCTURAL ELEMENTS TO BE REDUCED TO THE MINIMUM DIMENSION WITHOUT UNDERMINING REQUIRED FIRE RATING.

344 E 84TH STREET NEW YORK, NY 10028 BUILDING NOTES: INSPECTION, PROBING, AND EVALUATION OF EXISTING CONDITIONS HAS BEEN PERFORMED TO ENSURE THAT THE ALTERATION DESIGN WILL NOT CAUSE DAMAGE TO, DISRUPTION OF, OR RELOCATION AND MODIFICATION TO ANY STRUCTURAL ELEMENT INCLUDING SLABS, BEAMS, COLUMNS, PLUMBING RISERS, INTERCOM RISERS, PHONE RISERS, ELECTRICAL RISERS AND/OR VENTILATION CHASES/DUCTS. IN THE EVENT UNEXPECTED CONDITIONS ARE UNCOVERED AND/OR ALTERATION PLANS MUST BE MODIFIED IN ANY WAY, THE CONTRACTOR MUST NOTIFY BUILDING MANAGEMENT PRIOR TO PROCEEDING FURTHER. IF SIGNIFICANT ALTERATIONS TO THE APPROVED AND PERMITTED PLAN ARE REQUIRED AND THEY ARE PRESENTED AND APPROVED THROUGH MANAGMENT AND THE BUILDING CONSULTANT THE DOB PERMITS MUST BE AMENDED THROUGH THE PAA PROCESS AT THE DOB.

ALL WINDOWS TO BE DEMOLISHED DUST PROTECTION WITH PROPER PROTECTION AGAINST TRANSFER OF NOISE AND DUST AS WELL AS FUMES MUST BE IMPLEMENTED IMMEDIATELY UPON OPENING. ANY WORK PERFORMED CANNOT LOWER EXISTING FIRE RATINGS.

Floor Number:

FIRST & SECOND FLOOR DEMOLITION PLAN Seal & Signature:

Date: 5/26/2016 Project Number: Drawing: Checked: Drawing Number:

A-001.00

0440

Architect:

GENERAL DEMOLITION NOTES: VERIFY EXISTING CONDITIONS PRIOR TO THE COMMENCEMENT OF WORK AND NOTIFY THE ARCHITECT OF ANY DISCREPANCIES OR UNUSUAL CONDITIONS LEAVE AND PROTECT (E) WOOD FLOOR FOR REFINISHING

PHASE ALL WORK TO ACHIEVE THE MINIMUM DISTURBANCE IN WORK AREAS; PROTECT UNAFFECTED AREAS FROM DUST DIRT AND NOISE REMOVE ALL DEBRIS FROM THE SITE AND DISPOSE OF IN A MANNER APPROVED BY ALL LOCAL, STATE, AND FEDERAL REGULATIONS. PERFORM ALL DEMOLITION AND CARTING IN ACCORDANCE WITH THE BUILDING RULES AND REGULATIONS. BROOM SWEEP ALL PREMISES AND PUBLIC SPACES ON A DAILY BASIS.

LEAVE AND PROTECT (E) WOOD FLOOR FOR REFINISHING

Nava Companies 31 Union Square West, Suite 2D New York, NY 10003, USA Tel: 212.365.1052 www.navacompanies.com Mechanical Engineer: DEMOLISH AND REPLACE (E) WINDOWS

DEMOLISH AND REPLACE (E) WINDOWS

SALVAGE EQUIPMENT, FIXTURES AND DOORS AS REQUIRED BY THE CONTRACT DOCUMENTS. REUSE AS DIRECTED ON DRAWINGS AND IN SCHEDULES.

D'Antonio Consulting Engineers, P.C. 30 West Waukena Avenue Oceanside, NY 11572, USA 576.594.4284

BEDROOM BEDROOM

SALVAGE SPECIFIED DOORS AND ATTACHED HARDWARE FOR COURSE OF JOB. REMOVE THOSE NOT REUSED AT END OF JOB AS DIRECTED BY OWNER. SEE DOOR SCHEDULE FOR THOSE SALVAGED AND RELOCATED.

Structural Engineer: DEMOLISH AND REPLACE (E) WINDOWS

DEMOLISH AND REPLACE (E) WINDOWS

REMOVE ALL MISCELLANEOUS ATTACHMENTS TO WALLS, FLOORS, CEILINGS, WINDOWS, AND DOORS INCLUDING, BUT NOT LIMITED TO, NAILS, HOOKS, WIRES, DOORBELLS, AND STOPS. SHUT OFF ALL EXISTING PLUMBING HOOK-UPS IMMEDIATELY PRIOR TO DEMOLITION WORK AT EACH LOCATION.

Robert Silman Associates 32 Old Slip, 10th Floor New York, NY 10005, USA 212.420.7970

Key Plan: HALL UP

DEMOLISH AND REPLACE (E) WINDOWS

KITCHEN

DEMOLISH AND REPLACE (E) WINDOWS

REMOVE EXISTING FLOORING INCLUDING WOOD FLOOR, SADDLES, CARPET, TILE, STONE AND ALL SUB-FLOOR MATERIAL INCLUDING SLAB TOPPING. SALVAGE/ PRESERVE (E) WOOD FLOOR AS NOTED) RESTORE TO VALUES SPECIFIED IN APPLICABLE CODES THE INTEGRITY OF EXISTING RATED PARTITIONS AND THE FIRE PROTECTION OF STRUCTURAL MEMBERS THAT ARE DAMAGED DURING CONSTRUCTION.

Legend:

THIRD FLOOR DEMOLITION PLAN Scale: 1/4" = 1'0"

PROVIDE A MINIMUM OF TWO (2) FIRE EXTINGUISHERS OR MORE AS REQUIRED BY NYC DOB.

DEMOLISH AND REMOVE (E) DECKING

RELOCATE (E) CONDENSOR UNIT

Notification:

REMOVE ALL PARTITION WALLS, MILLWORK, DOORS, DOOR CASINGS, WINDOW CASINGS, DECORATIVE FINISHES, SHELVING AS INDICATED.

Issue Description

Date

ISSUE

ROOF DECK

PROTECT PUBLIC CORRIDORS AND SPACES FROM DAMAGE. Date

Revision

PROTECT ALL MATERIALS, SURFACES AND FINISHES TO REMAIN. SALVAGE ALL DOOR HARDWARE, LABEL AND BAG FOR RESTORATION AND REUSE. REMOVE ALL DROPPED CEILINGS, SOFFITS AND EXPOSED CONCRETE SLAB FOR INSPECTION AND PREPARATION FOR NEW FINISHES. DISCONNECT AND REMOVE ALL EXISTING LIGHTING, ELECTRICAL BOXES, TELEPHONE EQUIPMENT, ELECTRICAL TERMINATIONS. SEE DEMOLITION AND ELECTRICAL NOTES FOR ADDITIONAL SAFETY REQUIREMENTS AND TEMPORARY LIGHTING REQUIREMENTS.

FOURTH FLOOR DEMOLITION PLAN Scale: 1/4" = 1'0"

REDUCE CHASE SIZE AT ALL LOCATION OF BUILDING PLUMBING RISERS TO A MINIMUM. EXPOSE ALL RISERS FOR INSPECTION BY ARCHITECT AND BUILDING MANAGEMENT DEMISING WALLS, STRUCTURAL ELEMENTS TO BE REDUCED TO THE MINIMUM DIMENSION WITHOUT UNDERMINING REQUIRED FIRE RATING.

Project Title:

RINKER RESIDENCE

SALVAGE (E) GLASS SKYLIGHT

Floor Number:

THIRD & FOURTH FLOOR DEMOLITION PLAN Seal & Signature:

Date: 5/26/2016 Project Number: Drawing: Checked: Drawing Number:

A-002.00

0440

Architect: TENANT SAFETY PLAN:

5. 6.

Mechanical Engineer: D'Antonio Consulting Engineers, P.C. 30 West Waukena Avenue Oceanside, NY 11572, USA 576.594.4284

Structural Engineer: Robert Silman Associates 32 Old Slip, 10th Floor New York, NY 10005, USA 212.420.7970

Key Plan:

Legend: 9'-8"

FIRST FLOOR CONSTRUCTION PLAN Scale: 1/4" = 1'0"

Notification: Powder Room #205 PROVIDE LATICRETE WATERPROOF, BITUTHENE WATERPROOFING AND SOUNDPROOF SYSTEM AT FLOOR AND EXTEND 6" UP ALL WALLS AND FULL HEIGHT ON ALL SHOWER WALLS. PROVIDE DUROCK WALLBOARD IN ALL TUB/SHOWER ENCLOSURES AND USG SHEETROCK MOLD TOUGH IN ALL OTHER AREAS, INCLUDING CEILING.

40'-014"

19'-2"

PROVIDE NEW STONE SADDLE INSTALL ALL TILE, MATERIAL TO BE PROVIDED BY CONTRACTOR.

16'-61

5'-0"

14'-0"

INSTALL PLUMBING FIXTURES, FITTING AND ACCESSORIES PROVIDED BY CONTRACTOR. SEE FIXTURE SCHEDULE. FURNISH AND INSTALL ALL MILLWORK, MIRROR AND GLASS

Issue Description

Date

ISSUE

Dining Area #202 FURNISH AND INSTALL ALL MILLWORK, MIRROR, GLASS AND TILE REFINISH & PATCH AS NECESSARY (E) WOOD FLOOR

5 Living Area #201

FURNISH AND INSTALL NEW BASE, DOORS, CASINGS AND TRIM

01 A-010

203

FURNISH AND INSTALL NEW SWING AND SLIDE WINDOW WALL

FURNISH AND INSTALL ALL MILLWORK, MIRROR , GLASS AND TILE ALL DOOR FRAMES AND SPECIAL CONSTRUCTION TO USE PT WOOD. ALL WOOD USED FOR BLOCKING IS TO BE FIRE-TREATED WITH NON-TOXIC MATERIAL. REFINISH & PATCH AS NECESSARY (E) WOOD FLOOR

02 A-010

03 A-010

FURNISH AND INSTALL NEW BASE, DOORS, CASINGS AND TRIM

202

FURNISH AND INSTALL NEW WINDOWS

200

6'-012"

3'-6"

201

FURNISH AND INSTALL ALL MILLWORK.

Date

Revision

2 MECH.

Terrace #206

FURNISH AND INSTALL NEW DECKING. SEE FINISH SCHEDULE.

2'-9"

Tel: 212.365.1052 www.navacompanies.com

FURNISH AND INSTALL ALL SLAB / STONE. PROVIDE TEMPLATING AND FABRICATION.

2'-0" UP

3'-81 4"

3.1.

31 Union Square West, Suite 2D New York, NY 10003, USA

FURNISH AND INSTALL NEW EXTERIOR CONVENIENCE STAIR.

Kitchen #203

DN INSTALL ALL TILE, MATERIAL TO BE PROVIDED BY CONTRACTOR. FURNISH AND INSTALL ALL SLAB/STONE. PROVIDE TEMPLATING AND FABRICATION

2'-3"

Nava Companies

18'-93 4"

Egress. At all times in the course of construction provision shall be made for adequate egress as required by this code and the tenant protection plan shall identify the egress that will be provided. Required egress shall not be obstructed at any time except where approved by the commissioner. Fire safety. All necessary laws and controls, including those with respect to occupied dwellings, as well as additional safety measures necessitated by the construction shall be strictly observed. Health requirements. Specification of methods to be used for control of dust, disposal of construction debris, pest control and maintenance of sanitary facilities, and limitation of noise to acceptable levels shall be included. There shall be included a statement of compliance with applicable provisions of law relating to lead and asbestos. Compliance with housing standards. The requirements of the New York city housing maintenance code, and, where applicable, the New York state multiple dwelling law shall be strictly observed. Structural safety. No structural work shall be done that may endanger the occupants. Noise restrictions. Where hours of the day or the days of the week in which construction work may be undertaken are limited pursuant to the New York city noise control code, such limitations shall be stated.

21'-33 4"

FURNISH AND INSTALL ALL APPLIANCES INSTALL PLUMBING FIXTURES, FITTING AND ACCESSORIES PROVIDED BY CONTRACTOR. SEE FIXTURE SCHEDULE.

9'-612"

3'-11" 12'-8"

SECOND FLOOR CONSTRUCTION PLAN Scale: 1/4" = 1'0"

12'-33 4"

1'-0"

12'-612"

2'-0"

FURNISH AND INSTALL ALL MILLWORK, MIRROR AND GLASS REFINISH & PATCH AS NECESSARY (E) WOOD FLOOR

Project Title:

RINKER RESIDENCE 344 E 84TH STREET NEW YORK, NY 10028 Floor Number:

Entry #200

FURNISH AND INSTALL NEW BASE, DOORS, CASINGS AND TRIM

FIRST FLOOR AND SECOND FLOOR CONSTRUCTION PLAN

LEAVE (E) CARPET AND TERMINATE (E) BANISTER AT NEW PARTITION

Seal & Signature:

FURNISH AND INSTALL ALL MILLWORK, MIRROR AND GLASS ALL DOOR FRAMES AND SPECIAL CONSTRUCTION TO USE PT WOOD. ALL WOOD USED FOR BLOCKING IS TO BE FIRE-TREATED WITH NON-TOXIC MATERIAL.

Date: 5/26/2016 Project Number: Drawing: Checked: Drawing Number:

A-003.00

0440

Architect:

Lounge #201 REFINISH AND PATCH AS NECESSARY (E) WOOD FLOOR FURNISH AND INSTALL ALL MILLWORK, MIRROR AND GLASS ALL DOOR FRAMES AND SPECIAL CONSTRUCTION TO USE PT WOOD. ALL WOOD USED FOR BLOCKING IS TO BE FIRE-TREATED WITH NON-TOXIC MATERIAL.

Nava Companies

FURNISH AND INSTALL NEW BASE, DOORS, CASINGS AND TRIM

31 Union Square West, Suite 2D New York, NY 10003, USA Tel: 212.365.1052 www.navacompanies.com

40'-014" 10'-014"

2'-0"

11'-2"

2'-0"

11'-6"

Mechanical Engineer: D'Antonio Consulting Engineers, P.C. 30 West Waukena Avenue Oceanside, NY 11572, USA 576.594.4284

Bedroom #301

3 2

INSTALL NEW FLOORING, MATERIAL TO BE PROVIDED BY CONTRACTOR.

Owen's Bedroom #301

FURNISH AND INSTALL NEW BASE, DOORS, CASINGS, TRIM

Structural Engineer:

REFINISH AND PATCH AS NECESSARY (E) WOOD FLOOR

ALL DOOR FRAMES AND SPECIAL CONSTRUCTION TO USE PT WOOD. ALL WOOD USED FOR BLOCKING IS TO BE FIRE-TREATED WITH NON-TOXIC MATERIAL.

FURNISH AND INSTALL NEW BASE, DOORS, CASINGS, TRIM

11'-53 4"

11'-67 8"

FURNISH AND INSTALL NEW MILLWORK, BUILT-IN CABINETS, SEE ELEVATIONS

Robert Silman Associates 32 Old Slip, 10th Floor New York, NY 10005, USA 212.420.7970

REPLACE (E) WINDOWS

21'-33 4"

REPLACE (E) WINDOWS

Key Plan: 04 A-010

04 A-010

04 A-010.01

301

304

305

10'-03 8"

2'-512"

2'-1114"

2'-5"

306

2'-10"

Owen's Bathroom #302 PROVIDE LATICRETE WATERPROOFING AT FLOOR AND EXTEND 6" UP ALL WALLS AND FULL HEIGHT ON ALL SHOWER WALLS.

Bathroom #302 PROVIDE LATICRETE WATERPROOFING AT FLOOR AND EXTEND 6" UP ALL WALLS AND FULL HEIGHT ON ALL SHOWER WALLS.

6'-5"

302 UP DN

PROVIDE WATERPROOFING THROUGHOUT ENTIRETY OF NICHES IN SHOWER. AT WINDOW, EXTEND WP INTO THE FRAMED OPENING AND PROVIDE SEAL WHERE WP MEETS WINDOW FRAME. AT SILLS AND NICHE, SLOPE TO DRAIN 12" PER FOOT.

IN SHOWER PROVIDE LEAD PAN, CLAMPED AND SEALED INTO A NEW DRAIN COLLAR WHICH MUST CAP OVER THE CURB, EXTENDING A MIN. OF 12" ABOVE THE TOP OF THE CURB. DRAIN MUST HAVE WEEP HOLES. AFTER 24-HOUR WATER RETENTION TEST, ENTIRE LEAD PAN MUST BE COATED WITH MASTIC MEMBRANE, MASTERSEAL HLM 5000, PRIOR TO INSTALLATION OF MORTAR BED.

PROVIDE DUROCK WALLBOARD IN ALL TUB/SHOWER ENCLOSURES AND USG SHEETROCK MOLD TOUGH IN ALL OTHER AREAS, INCLUDING CEILING. PROVIDE NEW STONE SADDLE

20'-81 4"

7'-9"

8'-3"

Legend:

PROVIDE DUROCK WALLBOARD IN ALL TUB/SHOWER ENCLOSURES AND USG SHEETROCK MOLD TOUGH IN ALL OTHER AREAS, INCLUDING CEILING.

FURNISH AND INSTALL ALL SLAB/STONE, PROVIDE TEMPLATING AND FABRICATION

PROVIDE NEW STONE SADDLE

INSTALL ALL TILE, MATERIAL TO BE PROVIDED BY CONTRACTOR.

THIRD FLOOR CONSTRUCTION PLAN 1 Scale: 1/4" = 1'0"

INSTALL PLUMBING FIXTURES, FITTING AND ACCESSORIES PROVIDED BY CONTRACTOR. SEE FIXTURE SCHEDULE.

INSTALL ALL TILE, MATERIAL TO BE PROVIDED BY CONTRACTOR. INSTALL PLUMBING FIXTURES, FITTING AND ACCESSORIES PROVIDED BY CONTRACTOR. SEE FIXTURE SCHEDULE.

FURNISH AND INSTALL ALL MILLWORK, MIRROR AND GLASS

REPLACE (E) WINDOW

CORRIDOR # 300 REFINISH AND PATCH AS NECESSARY (E) WOOD FLOOR

Notification: COPYRIGHT NOTICE: THESE PLANS ARE COPYRIGHTED AND ARE SUBJECT TO COPYRIGHT PROTECTION AS AN 'ARCHITECTURAL WORK' UNDER SECTION 102 OF THE COPYRIGHT ACT 17 U.S.O. AS MENTIONED DECEMBER 1990 AND KNOWN AS ARCHITECTURAL WORKS PROTECTION ACT OF 1990. THE PROTECTION INCLUDES BUT IS NOT LIMITED TO THE OVERALL FORM AS WELL AS THE ARRANGEMENT AND COMPOSITION OF SPACES AND ELEMENTS OF THE DESIGN. UNDER SUCH PROTECTION, UNAUTHORIZED USE OF THESE PLANS, WORK, OR BUILDING REPRESENTED CAN LEGALLY RESULT IN CESSATION OF CONSTRUCTION OR BUILDING BEING SEIZED AND/OR MONETARY COMPENSATION TO: NAVA COMPANIES LLC THIS PLAN IS SUBMITTED ONLY FOR WORK INDICATED ON THE APPLICATION SPECIFICATION SHEET. ALL OTHER MATTERS ARE NOT TO BE RELIED UPON OR TO BE CONSIDERED AS EITHER BEING APPROVED OF OR IN ACCORDANCE WITH APPLICABLE CODES.

FURNISH AND INSTALL ALL MILLWORK, MIRROR AND GLASS ALL DOOR FRAMES AND SPECIAL CONSTRUCTION TO USE PT WOOD. ALL WOOD USED FOR BLOCKING IS TO BE FIRE-TREATED WITH NON-TOXIC MATERIAL.

Issue Description

Date

ISSUE

FURNISH AND INSTALL NEW BASE, DOORS, CASINGS AND TRIM

Master Bath #403 PROVIDE LATICRETE WATERPROOF, BITUTHENE WATERPROOFING AT FLOOR AND EXTEND 6" UP ALL WALLS AND FULL HEIGHT ON ALL SHOWER WALLS. IN SHOWER PROVIDE LEAD PAN, CLAMPED AND SEALED INTO A NEW DRAIN COLLAR WHICH MUST CAP OVER THE CURB, EXTENDING A MIN. OF 4" ABOVE THE TOP OF THE CURB. DRAIN MUST HAVE WEEP HOLES. AFTER 24-HOUR WATER RETENTION TEST, ENTIRE LEAD PAN MUST BE COATED WITH MASTIC MEMBRANE, MASTERSEAL HLM 5000, PRIOR TO INSTALLATION OF MORTAR BED.

Office #401 INSTALL NEW FLOORING, MATERIAL TO BE PROVIDED BY CONTRACTOR.

47'-01 4"

FURNISH AND INSTALL ALL MILLWORK, MIRROR AND GLASS

10'-23

5'-4"

9'-87

11'-73

6'-6"

FURNISH AND INSTALL ALL SLAB/STONE, PROVIDE TEMPLATING AND FABRICATION. INSTALL PLUMBING FIXTURES, FITTINGS, AND ACCESSORIES PROVIDED BY CONTRACTOR. SEE FIXTURE SCHEDULE.

PROVIDE DUROCK WALLBOARD IN ALL TUB/SHOWER ENCLOSURES AND USG SHEETROCK MOLD TOUGH IN ALL OTHER AREAS, INCLUDING CEILING.

ALL DOOR FRAMES AND SPECIAL CONSTRUCTION TO USE PT WOOD. ALL WOOD USED FOR BLOCKING IS TO BE FIRE-TREATED WITH NON-TOXIC MATERIAL.

7'-13 4"

2'-107 8"

FURNISH AND INSTALL ALL MILLWORK, MIRROR AND GLASS

4 6'-218"

21'-33 4"

INSTALL NEW WINDOWS

18'-93 4"

INSTALL PLUMBING FIXTURES, FITTING AND ACCESSORIES PROVIDED BY CONTRACTOR. SEE FIXTURE SCHEDULE.

11'-1012"

INSTALL ALL TILE, MATERIAL TO BE PROVIDED BY CONTRACTOR.

INSTALL NEW WINDOWS

02 A-010.01

04 A-010

403

3'-6"

FURNISH AND INSTALL ALL SLAB/STONE, PROVIDE TEMPLATING AND FABRICATION

Date

Revision

15'-33 4"

5'-83 8"

PROVIDE NEW STONE SADDLE

Project Title: 12'-83 8"

402

4'-112"

3'-0"

7'-3" 4'-0"

01 A-011

Master Bedroom #401

01 A-010.01 401

404

344 E 84TH STREET NEW YORK, NY 10028

05 A-010 DN

INSTALL NEW FLOORING, MATERIAL TO BE PROVIDED BY CONTRACTOR. 405

FURNISH AND INSTALL ALL MILLWORK, MIRROR AND GLASS

ALL DOOR FRAMES AND SPECIAL CONSTRUCTION TO USE PT WOOD. ALL WOOD USED FOR BLOCKING IS TO BE FIRE-TREATED WITH NON-TOXIC MATERIAL.

RINKER RESIDENCE

12'-0"

Floor Number:

THIRD AND FOURTH FLOOR CONSTRUCTION PLAN

INSTALL NEW WINDOWS FURNISH AND INSTALL NEW BASE, DOORS, CASINGS AND TRIM

12'-0"

13'-35 8"

2'-4"

9'-018"

Seal & Signature:

Date: 5/26/2016 Project Number: Drawing:

FOURTH FLOOR CONSTRUCTION PLAN Scale: 1/4" = 1'0"

Checked: CORRIDOR #400

Drawing Number:

INSTALL NEW FLOORING, MATERIAL TO BE PROVIDED BY CONTRACTOR. FURNISH AND INSTALL ALL MILLWORK, MIRROR AND GLASS ALL DOOR FRAMES AND SPECIAL CONSTRUCTION TO USE PT WOOD. ALL WOOD USED FOR BLOCKING IS TO BE FIRE-TREATED WITH NON-TOXIC MATERIAL. FURNISH AND INSTALL NEW BASE, DOORS, CASINGS AND TRIM

A-004.00

0440

Architect:

ROOF TERRACE FURNISH AND INSTALL NEW DECKING AND HANDRAIL FURNISH AND INSTALL NEW GAS FIRE PIT

Nava Companies

FURNISH AND INSTALL ALL MILLWORK AND FIXED SEATING

40'-01

FURNISH AND INSTALL ALL PLUMBING FIXTURES

31 Union Square West, Suite 2D New York, NY 10003, USA

36'-01 4"

Tel: 212.365.1052 www.navacompanies.com Mechanical Engineer: D'Antonio Consulting Engineers, P.C. 30 West Waukena Avenue Oceanside, NY 11572, USA 576.594.4284

Structural Engineer:

ROOF TERRACE

18'-113 8"

21'-33 4"

Robert Silman Associates 32 Old Slip, 10th Floor New York, NY 10005, USA 212.420.7970

Key Plan:

OPEN TO BELOW

12'-103 8"

15'-0"

Legend:

3'-0"

Notification:

ROOF CONSTRUCTION PLAN Scale: 1/4" = 1'0"

Issue Description

Date

ISSUE STC 56 BSA #301-60-SM

STC 48 BSA #301-60-SM

618"

47 8"

35 8"

5 8" 8"

STC 48 BSA #301-60-SM 612"

27 8" 15 8" 5

UNDERSIDE OF SLAB

35 8"

51 4" 5

53 4"

5 8" 8"

UNDERSIDE OF SLAB

PERIMETER SEALANT

UNDERSIDE OF SLAB

BATT INSULATION CUT TOP COURSE, FILL WITH NON SHRINK GROUT TIGHT TO SLAB STEEL TRACK

STEEL TRACK

Date

Revision

STEEL TRACK 3 5 8" BATT INSULATION

3 5 8" BATT INSULATION

3 5 8" BATT INSULATION EXTEND CEMENT BOARD TO UNDERSIDE OF SLAB, GROUT AND SEAL AT ENDS AS REQUIRED

(2) LAYERS 3 4" PLYWOOD EXTEND GWB TO UNDERSIDE OF SLAB, GROUT AND SEAL AT ENDS AS REQUIRED

EXTEND GWB TO UNDERSIDE OF SLAB, GROUT AND SEAL AT ENDS AS REQUIRED

13 4"

1 5 8" STEEL TRACK

4" STONE SLAB OR TILE ON EPOXY

1 1 2" RIGID INSULATION

WATERPROOF MEMBRANE, FULL HEIGHT

VARIES

8" THK. MASONITE PAINTED BLACK

Project Title:

3 5 8" 18 GAUGE STEEL STUDS AT 16 INCHES ON CENTER 1 5 8" 18 GAUGE STEEL STUDS AT 16 INCHES ON CENTER 5

3 8" 18 GAUGE STEEL STUDS AT 16 INCHES ON CENTER

8" TYPE 'X' GWB BOTH SIDES, TAPE AND (3) COATS SPACKLE, USE GREENBOARDS AT ALL WET LOCATIONS

5 8" TYPE 'X' GWB BOTH SIDES, TAPE AND (3) COATS SPACKLE, USE GREENBOARDS AT ALL WET LOCATIONS

STEEL TRACK

3" REBAR AT 48" ON CENTER DRILL AND EXPOXY INTO LAB; GROUT CORES SOLID AT BARS

5 8" TYPE 'X' GWB BOTH SIDES, TAPE AND (3) COATS SPACKLE, USE GREENBOARDS AT ALL WET LOCATIONS

RINKER RESIDENCE 344 E 84TH STREET NEW YORK, NY 10028

STEEL TRACK

8" TYPE 'X' GWB BOTH SIDES, TAPE AND (3) COATS SPACKLE, USE GREENBOARDS AT ALL WET LOCATIONS

Floor Number: 3

STONE SLAB ON EPOXY

TYPICAL STONE/TILE FLOOR ASSEMBLY

STEEL TRACK

CMU; SEE PLANS FOR BLOCK SIZE AND LOCATION; USE GROUND FACE CMU AR EXTERIOR LOCATIONS AT ROOF

ROOF CONSTRUCTION PLAN AND WALL TYPES Seal & Signature:

Date: 5/26/2016 Project Number: Drawing: Checked: Drawing Number:

Wall Type: 2 Hour Partition Scale: 3" = 1'0"

Wall Type: 1 Hour Partition Scale: 3" = 1'0"

Wall Type: Furring Scale: 3" = 1'0"

Wall Type: Pocket Wall Scale: 3" = 1'0"

Wall Type: 1 Hour Partition w/ Waterproof Membrane Scale: 3" = 1'0"

Wall Type: Exterior CMU Scale: 3" = 1'0"

A-005.00

0440

Architect:

ELECTRICAL NOTES

RCP LEGEND

CONTRACTOR TO VERIFY THAT ALL EQUIPMENT AND APPLIANCES ARE COMPATIBLE WITH EXISTING POWER. CONTRACTOR IS RESPONSIBLE FOR MAKING ALL REQUIRED ADJUSTMENTS AND CHANGES.

(E) Ceiling height, patch as required

New GWB Drop Ceiling: See Elevations for Heights. Minimize drop.

ELECTRICAL SPECIFICATIONS

WP 3" LED Low-Profile Fixed Waterproof Downlight.

31 Union Square West, Suite 2D New York, NY 10003, USA Tel: 212.365.1052 www.navacompanies.com

Mechanical Engineer: 3" LED Low-Profile Adjustable Downlight.

Specialty Fixture To Be Determined: Locate on Site With Architect

D'Antonio Consulting Engineers, P.C. 30 West Waukena Avenue Oceanside, NY 11572, USA 576.594.4284

Wall Sconce To Be Determined: Locate on Site with Architect

Structural Engineer: Fixture Switched to Door

STD

GFI

DCTD

Smoke/CO Detector, Hardwired, BRK Brands SC7010B

MECH.

Existing or Proposed Ceiling Clear Height. Coordinate with Elevations

Robert Silman Associates 32 Old Slip, 10th Floor New York, NY 10005, USA 212.420.7970

Key Plan:

Static Pressure Vent

DCTD

LUTRON: STWD-5BRL, Color and Engraving TBD

GFI

Closet Light, iO Line .75 Undercabinet Light, iO Line .75

SECOND FLOOR REFLECTED CEILING PLAN & POWER PLAN Scale: 1/4" = 1'0"

Legend:

ADDITIONAL NOTES 1 Locate Specialty Fixtures and Sconces On-Site with Architect as Shown. 2. Maximize Clear Ceiling Height Where Possible. Consult with Architect After Demolition.

POWER/ELEC. LEGEND WIRE SYM

PLAN DESCRIPTION SYM

Television Outlet, Install at 57"

GFI

Duplex Ground Fault Interupt Convenience Outlet, 15 amp

Issue Description

Date

ISSUE Duplex Convenience Outlet, 15 amp

FEEDERS AND CIRCUITS: A). PROVIDE ANY AND ALL MATERIALS, EQUIPMENT. LABOR, ETC... NECESSARY FOR THE COMPLETE INSTALLATION OF ALL BRANCH CIRCUITS TO EQUIPMENT, RECEPTACLES AND LIGHTING OUTLETS, AND WIRING FOR CONTROL EQUIPMENT FURNISHED BY OTHERS, ETC... B). WHERE REQUIRED, FURNISH AND INSTALL SAFETY TYPE DISCONNECT SWITCHES, FUSED OR UNFUSED, WITH PROPER POLES AND NEUTRALS, AS EACH CASE REQUIRED, IF THE EQUIVALENT IS NOT EXISTING OR FURNISHED BY OTHERS, AND IS NECESSARY TO CONFORM TO CODE. C). PROVIDE MATCHING RECEPTACLES FOR ALL EQUIPMENT FURNISHED WITH CORD AND PLUG. D). MAKE DIRECT CONNECTIONS AS REQUIRED TO ALL EQUIPMENT NOT FURNISHED WITH CORD AND PLUG. CONDUITS: A). APARTMENT PANEL FEEDER SHALL BE HEAVY-WEIGHT, RIGID, GALVANIZED TYPE. B). GREENFIELD AND THINWALL TUBING MAY BE USED IN HUNG CEILING AND PARTITIONS AS PERMITTED BY CODE AND LABOR AGREEMENTS. C). NO EXPOSED CIRCUITING. DEMOLITION: A). DO ALL NECESSARY DEMOLITION AND REMOVAL OF EXISTING LIGHTING AND ELECTRICAL EQUIPMENT AS REQUIRED. B). REROUTE AND RECONNECT ALL CIRCUITING TO EXISTING LOADS WHICH ARE TO REMAIN IF SAME IS DISTURBED BY DEMOLITION WORK. PROVIDE NEW HOMERUNS, IF REQUIRED. C). CONDUITS COMING UP OUT OF FLOOR SLAB WHICH ARE TO BE REMOVED SHALL BE CUT BACK BELOW TOP OF FINISHED SLAB TO PERMIT PATCHING. D). DISCONNECT AND REMOVE ALL EXISTING WIRING AND EXPOSED CONDUITS NOT BEING RETAINED OR REUSED. E). INSTALL BLANK PLATES ON ALL EXISTING OUTLETS WHICH ARE TO REMAIN BUT HAVE NO DEVICES. F).PROVIDE EXTENSION COLLARS ON EXISTING OUTLETS WHERE EXISTING WALLS, COLUMNS, ETC... ARE BEING LAMINATED OR FURRED-OUT. G). RELOCATE EXISTING ACTIVE OUTLET BOXES, JUNCTION BOXES, ETC... WHICH ARE RENDERED INACCESSIBLE BY NEW CONSTRUCTION. TEMPORARY LIGHT AND POWER: A). POWER SHALL BE OBTAINED FROM THE EXISTING APARTMENT PANEL FEEDER. B). PROVIDE NECESSARY MATERIALS AND LABOR TO MAKE POWER CONNECTIONS FOR MACHINES, PORTABLE TOOLS, ETC... AS USED BY OTHER TRADES, REGARDLESS OF SIZE. C). FURNISH ALL LABOR NEEDED TO KEEP THIS TEMPORARY SYSTEM ENERGIZED DURING THE ENTIRE STANDARD PERIOD OF WORKING TIME OF ALL TRADES, PLUS 15 MINUTES BEFORE AND 15 MINUTES AFTER THIS TIME AND OVERTIME AS REQUIRED FOR ANY AND ALL TRADES. NEW LIGHTING AND APPLIANCE PANEL: A). FURNISH AND INSTALL LIGHTING AND APPLIANCE PANEL AS INDICATED ON PLANS, OF THE CIRCUIT BREAKER TYPE, CONSTRUCTED FOR A ONE (1) PHASE, THREE (3) WIRE, SOLID NEUTRAL, 120/208 VOLT SYSTEM. B). TIE-BARS SHALL NOT BE USED TO CREATE MULTI-POLE CIRCUITS. C). ONLY ONE WIRE SHALL BE INSTALLED UNDER EACH CIRCUIT BREAKER. D). PANELBOARD SHALL BE MOUNTED IN CODE GAUGE AND SIZE BOX(ES) FOR MOUNTING AS INDICATED ON PLANS, COMPLETE WITH TRIM AND DOOR. E). BRANCHES SHALL BE SINGLE POLE CIRCUIT BREAKERS IN GENERAL, AND SHALL BE 15 AMPERE FOR RECEPTACLE AND LIGHTING, 20 AMPERE FOR RECEPTACLES, AND OTHER SIZES AS NOTED ON PLANS. F). INSTALL ACCURATE DIRECTORY INSIDE PANEL DOOR. CATV / TELEPHONE SERVICE: A). PROVIDE ALL POWER SUPPLY OUTLETS AS NOTED AND REQUIRED BY THE TELEPHONE COMPANY FOR USE WITH ITS EQUIPMENT. B). PROVIDE ALL BUSHINGS ON EACH END OF TELEPHONE CONDUITS. C). EXACT EXTENT OF WORK REQUIRED SHALL BE DETERMINED FROM THE TELEPHONE COMPANY REPRESENTATIVE PRIOR TO COMMENCING WORK. D). ELECTRICAL WORK TO INCLUDE IN-WALL TELEPHONE AND CATV WIRING FROM THE UTILITY ENTRY TO APARTMENT TO ALL OUTLETS. WALL JACKS TO BE LEVITON TYPE 625 AND 406 81. WALL TELEPHONE OUTLET TO BE TYPE 630. ALL TELEPHONE LOCATIONS TO HAVE ACCESS TO 4 LINES. E). ALL CATV AND TELEPHONE OUTLETS TO HAVE HOMERUNS TO PANEL AT LOCATION INDICATED.

3" LED Low-Profile Fixed Downlight.

Nava Companies

Quad Convenience Outlet

DCTD

Dedicated Duplex Appliance Outlet (consult appliance schedule and manufacturer for electrical specifications)

Switched Duplex Outlet

1/2 Switched Duplex Outlet

SHD

Motorized Shade Power

GFI DCTD

GFI

TEL

Telephone Distribution Point

HUB

NET

Computer Network Distribution Point

DBI

Door Box Intercom

Date

Revision

TSTAT TSTAT Thermostat Locations Telephone Cable Wall Mounted Phone Floor Telephone

NOTES THIRD FLOOR REFLECTED CEILING PLAN & POWER PLAN 2 Scale: 1/4" = 1'0"

GROUNDING:

A). WHERE EXISTING WIRING WHICH IS TO REMAIN IS LEFT EXPOSED BY THE DEMOLITION AND REMOVAL OF PARTITIONS AND/OR HUNG CEILINGS, REROUTE SUCH WIRING AS REQUIRED TO MAINTAIN THE CIRCUIT CONTINUITY. 1. GROUNDING CONNECTIONS SHALL BE MADE TO THE NON-CONDUCTIVE CARRYING PARTS OF ALL ELECTRICAL EQUIPMENT AS B). WHERE EXISTING WIRING WHICH IS TO REMAIN IS LEFT STUBBED UP FROM FLOOR BY THE DEMOLITION AND REMOVAL OF NOTE: REQUIRED. PARTITIONS RE-ROUTE SUCH WIRING AS REQUIRED TO MAINTAIN CIRCUIT CONTINUITY AND CUT BACK CONDUIT BELOW TOP OF 1. SHOP DRAWINGS FOR ALL LIGHTING AND LOW VOLTAGE CONTROL SYSTEMS TO BE SUBMITTED TO THE ARCHITECT FOR REVIEW. ELECTRICAL SERVICE: FINISHED SLAB TO PERMIT PATCHING. MATERIALS: 1. EXISTING BUILDING INCOMING ELECTRIC SERVICE SHALL BE UTILIZED FOR THIS WORK. C). WHERE EXISTING CIRCUITING IS BEING UTILIZED FOR CONNECTION OF NEW LOAD OR IS BEING RETAINED FOR EXISTING LOADS 1. ALL MATERIALS AND EQUIPMENT SHALL BE NEW AND IN GOOD CONDITION AND HAVE UNDERWRITER'S LABORATORIES LABELS. 2. MAKE ALL NECESSARY MODIFICATIONS, EXTENSIONS, ETC... AS NOTED ON PLANS AND/OR REQUIRED. AND SUCH CIRCUITING IS NOT EXACTLY AS INDICATED ON PLANS, MAKE SUCH MODIFICATIONS AS MAY BE REQUIRED TO WIRING TO 2. ANY MATERIALS AND/OR EQUIPMENT WHICH THE DESIGNER AND ARCHITECT REGARDS AS UNSATISFACTORY SHALL NOT BE INSTALLED; OTHER MATERIALS 3. ENTIRE INSTALLATION SHALL BE IN FULL ACCORDANCE WITH ALL REQUIREMENTS OF THE CONSOLIDATED EDISON COMPANY AND ACCOMPLISH THE DESIGN INTENT. OR EQUIPMENT SHALL BE SUBMITTED AND IF CONSIDERED NECESSARY TO REQUEST PARTICULAR ITEMS BY NAME AND/OR CATALOG NUMBER, SUCH THE SHERRY NETHRTLAND. D). WHERE EXISTING LIGHTING, EQUIPMENT, WIRING, ETC... IS INDICATED AS REMAINING AND SUCH ITEMS INTERFERE WITH THE REQUESTS SHALL BE COMPLIED WITH, WITHOUT ADDITIONAL CHARGE. CONDUCTORS: INSTALLATION OR DEMOLITION WORK OF OTHER TRADES, BUT WILL NOT CONFLICT WITH SAME AFTER WORK IS COMPLETED, 3. MATERIALS AND EQUIPMENT SHALL BE SPECIFIED IN OTHER PARAGRAPHS NOTED ON PLANS, OR SUBJECT TO APPROVAL, BASED UPON ADAPTABILITY FOR 1. ALL BRANCH CIRCUIT CONDUCTORS MAY BE TYPE TW FOR FIFTEEN AND TWENTY AMPERE CIRCUITS. ALL SIZES INDICATED ON DISCONNECT, REMOVE, RELOCATE TO AVOID CONFLICTS, REINSTALL AND RECONNECT SUCH ITEMS AS REQUIRED. INTENDED USE. PLANS ARE BASED UPON THW COPPER WIRE. E). WHERE EXISTING LIGHTING, EQUIPMENT, WIRING, ETC... IS TO REMAIN AND SUCH WIRING IS FOUND TO BE DEFECTIVE, MAKE ALL WORKMANSHIP: 2. ALL CONDUCTORS #8 AND SMALLER SHALL BE SOLID, #6 AND LARGER SHALL BE STRANDED. CORRECTIONS AND REPLACEMENTS NECESSARY TO ELIMINATE THE DEFECT AND PUT SUCH ITEMS IN SATISFACTORY OPERATING 1. INSTALL CONDUITS CAREFULLY AND PROTECT AGAINST DAMAGE, REMOVING ALL CRUSHED OR DAMAGED CONDUITS. CAP OR PLUG ENDS TO PROTECT PIPE SLEEVES, SUPPORTS AND INSERTS: CONDITION. AGAINST DIRT OR MOISTURE BEFORE PULLING WIRES. 1. WHERE PIPES PASS THROUGH MASONRY, CONCRETE WALLS OR FLOORS, SET SUCH SLEEVES AS ARE NECESSARY FOR THE CUTTING AND PATCHING: 2. ALL CONDUITS SHALL BE SUPPORTED WITH APPROPRIATE HANGERS AT NOT OVER 8 FOOT INTERVALS. RUN EXPOSED CONDUITS PARALLEL OR PASSAGE OF THE PIPES. A). DO ALL THE REQUIRED CUTTING OF THE STRUCTURE NECESSARY FOR THE INSTALLATION OF THIS WORK. NO CUTTING LIKELY TO PERPENDICULAR TO WALLS. USE APPROPRIATE FITTINGS FOR ALL BENDS, ETC... 2. SLEEVES SHALL NOT BE USED IN ANY PORTION OF THE BUILDING WHERE THE USE OF SAME WOULD IMPAIR THE STRENGTH OF WEAKEN THE STRUCTURE (OR ANY PART THEREOF) SHALL BE DONE WITHOUT THE WRITTEN APPROVAL OF THE OWNER. 3. PROVIDE ALL LOCKNUTS AND BUSHINGS AS REQUIRED WHERE CONDUITS ENTER BOXES, CABINETS, ETC... CONSTRUCTION FEATURES OF THE BUILDING. B). PATCHING SHALL BE DONE BY THE GENERAL CONTRACTOR. 4. NOT MORE THAN THREE RIGHT-ANGLE BENDS, OR THEIR EQUIVALENT, SHALL BE MADE IN CONDUIT BETWEEN PULLBOXES. 3. SLEEVES PASSING THROUGH WALLS WHERE SUBJECT TO LEAKAGE SHALL BE CAULKED TO OBTAIN A WATER-TIGHT JOINT. 5. LEAVE A DRAG WIRE IN EVERY SPARE OR EMPTY CONDUIT. 6. NOTHING SHALL BE DONE WHICH WILL IN ANY MANNER ENDANGER OR UNDERMINE THE STRUCTURE OR ANY PART THEREOF.

JOB CONDITIONS:

1) All wires should be terminated in a box mounted straight and level at each location unless otherwise noted. 2) All wires are run from their marked location to the main equipment area unless otherwise noted. 3) All wires must be labeled on both ends using the same room names. 4) All power for TV and equipment locations to be on the same phase and within 18" of the wiring point. 5) Do not run any wire parallel to or within 3ft of line voltage electrical power runs. The longer the run, the greater the signal degredation. 6) Cross power lines at 90 degrees whenever possible. 7) All electrical boxes must be minimum 3" deep. All 1-gang boxes should be 1900 box with single gang collar. All Volume Controls (VC) will use mud rings in place of Electrical Boxes. 8) All associated low voltage wire to be supplied by Innovative Audio unless otherwise noted. 9) Avoid running low voltage wire within 10 ft. of high voltage lines, 200 amp feeds, etc. 10) All EQ runs require a 10 ft tail outside of the wall unless otherwise noted. All other locations require a minimum 3 ft tail. 11) See Wire Schedule and GC Scope of Work for more information. 12) Power requirements to be verified by General Contractor

Project Title:

RINKER RESIDENCE 344 E 84TH STREET NEW YORK, NY 10028 Floor Number:

SECOND & THIRD FLOOR RCP & POWER PLAN Seal & Signature:

Date: 5/26/2016 Project Number: Drawing: Checked: Drawing Number:

A-006.00

0440

Architect:

ELECTRICAL NOTES

RCP LEGEND

CONTRACTOR TO VERIFY THAT ALL EQUIPMENT AND APPLIANCES ARE COMPATIBLE WITH EXISTING POWER. CONTRACTOR IS RESPONSIBLE FOR MAKING ALL REQUIRED ADJUSTMENTS AND CHANGES.

(E) Ceiling height, patch as required

New GWB Drop Ceiling: See Elevations for Heights. Minimize drop.

GENERAL A). PROVIDE LOAD LETTER CONFIRMING THAT THE EXISTING ELECTRICAL SERVICE IS ADEQUATE FOR THE DEVICES, EQUIPMENT, AND FIXTURES SPECIFIED. CONTRACTOR TO EXTEND SERVICE FROM HALLWAY PANEL IF ADDITIONAL POWER IS REQUIRED, ACCORDING TO THE STANDARDS, SYSTEMS, AND SPECIFICATIONS OF THE BUILDING MANAGEMENT. RESTORE ALL EXISTING DISTURBED WORK TO ITS ORIGINAL CONDITION INCLUDING MAINTENANCE OF WIRING CONTINUITY AS REQUIRED. B). PROVIDE ALL FIXTURES, WIRING, AND ELECTRICAL OUTLETS, TELECOMMUNICATIONS WIRING, DEVICES, AND CATV AS INDICATED ON THE DRAWINGS. INSTALL ALL LIGHT FIXTURES PROVIDED BY OWNER. C). ALL WIRING DEVICES TO BE LUTRON ARCHITECTURAL STYLE. D). ELECTRICAL WORK TO INCLUDE IN-WALL TELEPHONE WIRING FROM THE NYNEX ENTRY TO ALL OUTLETS. WALL JACKS TO BE LEVITON TYPE 625. E). ELECTRICAL WORK TO INCLUDE IN-WALL WIRING FOR TV . OUTLETS TO BE DECORA TYPE. F). ELECTRICIAN TO BE RESPONSIBLE FOR DESIGN OF ALL CIRCUITS AND DISTRIBUTION AND FOR ALL REQUIRED PERMITS, INSPECTIONS AND APPROVALS FROM BOTH GOVERNMENT AGENCIES AND THE POWER UTILITY. G). REFER TO AV DRAWINGS FOR SCOPE OF WORK ALLOCATION H). PROVIDE GANG BOXES AND PLATES AS PER DIAGRAM. I). ALL SMOKE DETECTORS TO BE HARDWIRED. J). NO ALUMINUM WIRING PERMITTED. K). PROVIDE PIGTAILS AT ALL JUNCTION BOXES INDICATED ON DRAWINGS. INCLUDE INSTALLATION OF FIXTURES PROVIDED BY OWNER AT THOSE LOCATIONS. L). UNLESS OTHERWISE NOTED, LOCATE ALL CEILING BOXES ON THE CENTER LINE OF THE ROOM IN 2 DIRECTIONS AND LOCATE ALL WALL BOXES ON THE CENTER OF THAT WALL. CONFIRM LOCATION OF ALL BOXES WITH ARCHITECT. M). MOUNT ALL SWITCHES AT 4'-0" ABOVE FINISHED FLOOR AND RECEPTACLES IN BASEBOARD (UNLESS OTHERWISE NOTED. FEEDERS AND CIRCUITS: A). PROVIDE ANY AND ALL MATERIALS, EQUIPMENT. LABOR, ETC... NECESSARY FOR THE COMPLETE INSTALLATION OF ALL BRANCH CIRCUITS TO EQUIPMENT, RECEPTACLES AND LIGHTING OUTLETS, AND WIRING FOR CONTROL EQUIPMENT FURNISHED BY OTHERS, ETC... B). WHERE REQUIRED, FURNISH AND INSTALL SAFETY TYPE DISCONNECT SWITCHES, FUSED OR UNFUSED, WITH PROPER POLES AND NEUTRALS, AS EACH CASE REQUIRED, IF THE EQUIVALENT IS NOT EXISTING OR FURNISHED BY OTHERS, AND IS NECESSARY TO CONFORM TO CODE. C). PROVIDE MATCHING RECEPTACLES FOR ALL EQUIPMENT FURNISHED WITH CORD AND PLUG. D). MAKE DIRECT CONNECTIONS AS REQUIRED TO ALL EQUIPMENT NOT FURNISHED WITH CORD AND PLUG. CONDUITS: A). APARTMENT PANEL FEEDER SHALL BE HEAVY-WEIGHT, RIGID, GALVANIZED TYPE. B). GREENFIELD AND THINWALL TUBING MAY BE USED IN HUNG CEILING AND PARTITIONS AS PERMITTED BY CODE AND LABOR AGREEMENTS. C). NO EXPOSED CIRCUITING. DEMOLITION: A). DO ALL NECESSARY DEMOLITION AND REMOVAL OF EXISTING LIGHTING AND ELECTRICAL EQUIPMENT AS REQUIRED. B). REROUTE AND RECONNECT ALL CIRCUITING TO EXISTING LOADS WHICH ARE TO REMAIN IF SAME IS DISTURBED BY DEMOLITION WORK. PROVIDE NEW HOMERUNS, IF REQUIRED. C). CONDUITS COMING UP OUT OF FLOOR SLAB WHICH ARE TO BE REMOVED SHALL BE CUT BACK BELOW TOP OF FINISHED SLAB TO PERMIT PATCHING. D). DISCONNECT AND REMOVE ALL EXISTING WIRING AND EXPOSED CONDUITS NOT BEING RETAINED OR REUSED. E). INSTALL BLANK PLATES ON ALL EXISTING OUTLETS WHICH ARE TO REMAIN BUT HAVE NO DEVICES. F).PROVIDE EXTENSION COLLARS ON EXISTING OUTLETS WHERE EXISTING WALLS, COLUMNS, ETC... ARE BEING LAMINATED OR FURRED-OUT. G). RELOCATE EXISTING ACTIVE OUTLET BOXES, JUNCTION BOXES, ETC... WHICH ARE RENDERED INACCESSIBLE BY NEW CONSTRUCTION. TEMPORARY LIGHT AND POWER: A). POWER SHALL BE OBTAINED FROM THE EXISTING APARTMENT PANEL FEEDER. B). PROVIDE NECESSARY MATERIALS AND LABOR TO MAKE POWER CONNECTIONS FOR MACHINES, PORTABLE TOOLS, ETC... AS USED BY OTHER TRADES, REGARDLESS OF SIZE. C). FURNISH ALL LABOR NEEDED TO KEEP THIS TEMPORARY SYSTEM ENERGIZED DURING THE ENTIRE STANDARD PERIOD OF WORKING TIME OF ALL TRADES, PLUS 15 MINUTES BEFORE AND 15 MINUTES AFTER THIS TIME AND OVERTIME AS REQUIRED FOR ANY AND ALL TRADES. NEW LIGHTING AND APPLIANCE PANEL: A). FURNISH AND INSTALL LIGHTING AND APPLIANCE PANEL AS INDICATED ON PLANS, OF THE CIRCUIT BREAKER TYPE, CONSTRUCTED FOR A ONE (1) PHASE, THREE (3) WIRE, SOLID NEUTRAL, 120/208 VOLT SYSTEM. B). TIE-BARS SHALL NOT BE USED TO CREATE MULTI-POLE CIRCUITS. C). ONLY ONE WIRE SHALL BE INSTALLED UNDER EACH CIRCUIT BREAKER. D). PANELBOARD SHALL BE MOUNTED IN CODE GAUGE AND SIZE BOX(ES) FOR MOUNTING AS INDICATED ON PLANS, COMPLETE WITH TRIM AND DOOR. E). BRANCHES SHALL BE SINGLE POLE CIRCUIT BREAKERS IN GENERAL, AND SHALL BE 15 AMPERE FOR RECEPTACLE AND LIGHTING, 20 AMPERE FOR RECEPTACLES, AND OTHER SIZES AS NOTED ON PLANS. F). INSTALL ACCURATE DIRECTORY INSIDE PANEL DOOR. CATV / TELEPHONE SERVICE: A). PROVIDE ALL POWER SUPPLY OUTLETS AS NOTED AND REQUIRED BY THE TELEPHONE COMPANY FOR USE WITH ITS EQUIPMENT. B). PROVIDE ALL BUSHINGS ON EACH END OF TELEPHONE CONDUITS. C). EXACT EXTENT OF WORK REQUIRED SHALL BE DETERMINED FROM THE TELEPHONE COMPANY REPRESENTATIVE PRIOR TO COMMENCING WORK. D). ELECTRICAL WORK TO INCLUDE IN-WALL TELEPHONE AND CATV WIRING FROM THE UTILITY ENTRY TO APARTMENT TO ALL OUTLETS. WALL JACKS TO BE LEVITON TYPE 625 AND 406 81. WALL TELEPHONE OUTLET TO BE TYPE 630. ALL TELEPHONE LOCATIONS TO HAVE ACCESS TO 4 LINES. E). ALL CATV AND TELEPHONE OUTLETS TO HAVE HOMERUNS TO PANEL AT LOCATION INDICATED.

ELECTRICAL SPECIFICATIONS

3" LED Low-Profile Fixed Downlight.

WP 3" LED Low-Profile Fixed Waterproof Downlight.

GFI

GFI GFI

Nava Companies 31 Union Square West, Suite 2D New York, NY 10003, USA Tel: 212.365.1052 www.navacompanies.com Mechanical Engineer:

3" LED Low-Profile Adjustable Downlight.

Specialty Fixture To Be Determined: Locate on Site With Architect

D'Antonio Consulting Engineers, P.C. 30 West Waukena Avenue Oceanside, NY 11572, USA 576.594.4284

TV Wall Sconce To Be Determined: Locate on Site with Architect

Structural Engineer: Fixture Switched to Door

STD

Smoke/CO Detector, Hardwired, BRK Brands SC7010B Existing or Proposed Ceiling Clear Height. Coordinate with Elevations

Robert Silman Associates 32 Old Slip, 10th Floor New York, NY 10005, USA 212.420.7970

Key Plan:

Static Pressure Vent

LUTRON: STWD-5BRL, Color and Engraving TBD

GFI Closet Light, iO Line .75 Undercabinet Light, iO Line .75

FOURTH FLOOR REFLECTED CEILING PLAN & POWER PLAN Scale: 1/4" = 1'0"

Legend:

ADDITIONAL NOTES 1 Locate Specialty Fixtures and Sconces On-Site with Architect as Shown. 2. Maximize Clear Ceiling Height Where Possible. Consult with Architect After Demolition.

POWER/ELEC. LEGEND WIRE SYM GFI

GFI

PLAN DESCRIPTION SYM

GFI

Television Outlet, Install at 57"

GFI

Duplex Ground Fault Interupt Convenience Outlet, 15 amp

Issue Description

Date

ISSUE Duplex Convenience Outlet, 15 amp Quad Convenience Outlet

ROOF TERRACE

OPEN TO BELOW

DCTD

Dedicated Duplex Appliance Outlet (consult appliance schedule and manufacturer for electrical specifications)

Switched Duplex Outlet

1/2 Switched Duplex Outlet

SHD

Motorized Shade Power

TEL

Telephone Distribution Point

HUB

NET

Computer Network Distribution Point

DBI

Door Box Intercom

Date

Revision

TSTAT TSTAT Thermostat Locations Telephone DN

Cable Wall Mounted Phone Floor Telephone

NOTES ROOF REFLECTED CEILING PLAN & POWER PLAN 2 Scale: 1/4" = 1'0"

GROUNDING:

JOB CONDITIONS:

Project Title:

RINKER RESIDENCE 344 E 84TH STREET NEW YORK, NY 10028 Floor Number:

FOURTH FLOOR & ROOF POWER PLAN Seal & Signature:

Date: 5/26/2016 Project Number: Drawing: Checked: Drawing Number:

A-007.00

0440

Architect:

WINDOW SCHEDULE LOCATION

DETAILS

DIMENSION (V.I.F)

WINDOW NUMBER

ROOM

RM #

LIVING

201

Existing

LIVING

201

Existing

HINGING

HEIGHT

WIDTH

Painted

Existing

5' 7" (E)

3' 2" (E)

Painted

Existing

5' 7" (E)

3' 2" (E)

Painted

Existing

5' 7" (E)

3' 2" (E)

EXT. FINISH INT. FINISH

Existing

HARDWARE

TYPE

REMARKS

SPEC.

Nava Companies 31 Union Square West, Suite 2D New York, NY 10003, USA Tel: 212.365.1052 www.navacompanies.com

LIVING

201

DINING

202

Painted

Fixed

8'-1 3/8"

2'-6"

Hope's Landmark175 Series

DINING

202

Painted

Swing

8'-1 3/8"

2'-6"

Hope's Landmark175 Series

DINING

202

Painted

Swing

8'-1 3/8"

2'-6"

Hope's Landmark175 Series

KITCHEN

203

Painted

Fixed

5' 1 1/2"

4' 2 1/4"

Hope's Landmark175 Series

BEDROOM 1

301

Existing

Painted

Existing

4' 11" (E)

3' 2" (E)

BEDROOM 1

301

Existing

Painted

Existing

4' 11" (E)

3' 2" (E)

BATHROOM 1

302

Existing

Painted

Existing

4' 11" (E)

3' 2" (E)

OWEN'S BEDROOM

305

Existing

Painted

Existing

4' 11" (E)

3' 2" (E)

OWEN'S BEDROOM

305

Existing

Painted

Existing

4' 11" (E)

3' 2" (E)

OWEN'S BATHROOM

306

Existing

Painted

Existing

4' 11" (E)

3' 2" (E)

MASTER BATHROOM

403

Painted

Hopper

5'-7 7/8"

2'-4"

MASTER BATHROOM

403

Painted

Hopper

5'-7 7/8"

2'-4"

MASTER BEDROOM

401

Painted

Hopper

6'-3 3/8"

2'-8"

MASTER BEDROOM

401

Painted

Hopper

6'-3 3/8"

2'-8"

MASTER BEDROOM

401

Painted

Hopper

6'-3 3/8"

2'-8"

MASTER BEDROOM

401

Painted

Hopper

6'-3 3/8"

2'-8"

OFFICE

404

Painted

Fixed

9'-3 1/4"

OFFICE

404

Painted

Fixed

OFFICE

404

Painted

OFFICE

404

Mechanical Engineer: D'Antonio Consulting Engineers, P.C. 30 West Waukena Avenue Oceanside, NY 11572, USA 576.594.4284

Structural Engineer: Robert Silman Associates 32 Old Slip, 10th Floor New York, NY 10005, USA 212.420.7970 (E) AC LOUVER

Key Plan:

(E) AC LOUVER

Legend:

3'-4"

Hope's Landmark175 Series

9'-3 1/4"

3'-4"

Hope's Landmark175 Series

Fixed

9'-3 1/4"

3'-4"

Hope's Landmark175 Series

Painted

Fixed

9'-3 1/4"

3'-4"

Hope's Landmark175 Series

ROOF

Painted

Fixed

6'-3"

3'-9 1/4"

ROOF

Painted

Fixed

6'-3"

2'-3 1/8"

ROOF

Painted

Fixed

6'-3"

2'-3 1/8"

ROOF

Painted

Fixed

6'-3"

2'-3 1/8"

ROOF

Painted

Fixed

6'-3"

2'-3 1/8"

Issue Description ISSUE

1 29

ROOF

Painted

Fixed

6'-3"

2'-3 1/8"

ROOF

Painted

Fixed

6'-3"

3'-9 1/4"

Date

NORTH ELEVATION Scale: 3/8" = 1'0"

Date

Revision

NATURAL LIGHT AND VENTILATION

LOCATION Living Room Dining Room

ROOM # 201

SQUARE FT. 270

WINDOW AREA 52.8

Kitchen Bedroom 1

202 203 301

153 100 128.5

120.2 21.5 30

Owen's Bed

305

131.4

Master Bed Master Office

401 404

150 211

30 91.4 135

LIGHT 19% 80% 21.5% 23% 22% 60% 63%

OPR. AREA 26.4 61.4 10.75 15 15

VENT 9.5% 40%

45.7

10.75 % 12.5 % 11% 30%

21%

Project Title:

RINKER RESIDENCE 344 E 84TH STREET NEW YORK, NY 10028 Floor Number:

SCHEDULE AND ELEVATION Seal & Signature:

Date: 5/26/2016 Project Number: Drawing: Checked: Drawing Number:

A-008.00

SOUTH ELEVATION Scale: 3/8" = 1'0"

0440

Architect:

APPLIANCE SCHEDULE: All appliances to be furnished by Contractor. Contractor to coordinate delivery from sidewalk to apartment and protect items for install.

# 01 02 03 04 05 06 07 08 09

LOCATION Kitchen Kitchen Kitchen Kitchen Kitchen W/D W/D Terrace Office

ROOM # 201 201 201 201 201 303 303

ITEM Refrigerator Range

MFR Miele Miele

Hood Microwave Dishwasher Washer Dryer

Miele Miele Miele LG LG

MODEL # KR 1913 VI HR 1934 DF DAR 1130 H 6700 BM G 6365 SC Vi WM3570HWA DLEX3570W

N/A 404

Outdoor Range

WOLF GE

OG 42 ZDB1240HII

Refrig. Drawers

STYLE Integrated 36" Gas 36" Insert 24" Speed oven Diamond Series WHITE WHITE MONOGRAM

QTY 1 1 1 1 1 1 1 1 1

FINISH SCHEDULE

REMARKS Left Hinge, Integrated

Fully Integrated

TAG F.1

DESCRIPTION LV WOOD - EUROPEAN OAK - ESOPUS - CHARACTER GRADE, WIRE BRUSHED, 7IN PLANK WIDTH

LOCATION

ROOM #

ITEM

STONE SLAB: IMPERIAL WHITE DANBY, HONED - AVAILABLE FROM STONE SOURCE (212) 979.6400

SUBMIT SPEC FOR APPROVAL

F.3

STONE SLAB: STATUARIO TUCCI, HONED, 2" THK. - AVAILABLE FROM STONE SOURCE (212) 979.6400

SUBMIT SPEC FOR APPROVAL

Nava Companies 31 Union Square West, Suite 2D New York, NY 10003, USA Tel: 212.365.1052 www.navacompanies.com Mechanical Engineer:

F.4

STONE DECKING: HONED BASALT

SUBMIT SPEC FOR APPROVAL

D'Antonio Consulting Engineers, P.C. 30 West Waukena Avenue Oceanside, NY 11572, USA 576.594.4284

F.5

PORCELANOSA KRION SOLID SURFACE MATERIAL. SNOW WHITE. FOR CONSTRUCTION DETAILS AND SUBSTRATE SPECIFICATION SEE CONSTRUCTION DOCUMENTS AND DETAILS

SUBMIT SPEC FOR APPROVAL

Structural Engineer:

F.6

STONE TILE: 12" X 24" CARRARA MARBLE. - AVAILABLE FROM STONE SOURCE (212) 979.6400

SUBMIT SPEC FOR APPROVAL

Robert Silman Associates 32 Old Slip, 10th Floor New York, NY 10005, USA 212.420.7970

F.7

TILE: WHITE SUBWAY TILE

SUBMIT SPEC FOR APPROVAL

Key Plan:

24" Integrated

F.8

TILE: ANN SACKS SAVOY PENNY ROUND - PAPERWHITE - USE BLACK GROUT (12" by 12" SAMPLE WITH GROUT TO BE PROVIDED FOR APPROVAL)

SUBMIT SPEC FOR APPROVAL

F.9

TILE: ALLOW $20 PSF

SUBMIT SPEC FOR APPROVAL

F.10

TILE: ALLOW $20 PSF

SUBMIT SPEC FOR APPROVAL

F.11

WOOD: SATIN LACQUER FINISH - COLOR: FARROW & BALL HAGUE BLUE - FINISH SAMPLE TO BE PROVIDED FOR APPROVAL

SUBMIT SPEC FOR APPROVAL

Back Outlet Toilet

F.12

WOOD: SATIN LACQUER FINISH - COLOR: WHITE - FINISH SAMPLE TO BE PROVIDED FOR APPROVAL

SUBMIT SPEC FOR APPROVAL

F.13

WOOD: FINISH TO MATCH SAMPLE OF FINISH F.1 (WOOD FLOOR) - SAMPLE TO BE PROVIDED FOR APPROVAL

SUBMIT SPEC FOR APPROVAL

MFR

MODEL #

STYLE

FINISH

QTY

REMARKS

Kitchen

203

Faucet

Newport Brass

9911L

East Linear

Antique Brass

3-hole Faucet with Side Spray

Kitchen

203

Sink

Franke

MHK110-28

Manor

Fireclay White

Apron Front

Powder Room

204

Faucet

Hansgrohe

32070821

Talis S

Brushed Nickel

Single Lever

Powder Room

204

Sink

Duravit

045450

Vero

White

Include metal Console #003065

Powder Room

204

Toilet

Duravit

213409

Happy D.2

White

Back Outlet Toilet

Powder Room

204

Toilet Seat

Duravit

0064690099

Happy D.2

White

Guest Bath

302

Faucet

Hansgrohe

32070821

Talis S

Brushed Nickel

Guest Bath

302

Toilet

Duravit

213409

Happy D.2

White

Guest Bath

302

Toilet Seat

Duravit

0064690099

Happy D.2

White

Guest Bath

302

Sink

Duravit

045748

Happy D.2

White

Undermount

Guest Bath

302

Showerset

Hansgrohe

27143821

Croma

Brushed Nickel

Showerset w/ Tub Spout

Guest Bath

302

Tub

Duravit

700100

D-Code

White

Owen's Bath

306

Toilet

Duravit

213409

Happy D.2

White

Owen's Bath

306

Toilet Seat

Duravit

0064690099

Happy D.2

White

Owen's Bath

306

Sink

Duravit

045748

Happy D.2

White

Owen's Bath

306

Faucet

Hansgrohe

32070821

Talis S

Brushed Nickel

Owen's Bath

306

Showerset

Hansgrohe

27169821

Croma

Brushed Nickel

Owen's Bath

306

Showerdrain

Infinity Drain

G3 Square

Satin Stainless

Master Bath

403

Faucet

Newport Brass

3-9911L

Antique Brass

Wall Mounted

Master Bath

403

Sink

Custom

Provide Drain to Match Faucet

Master Bath

403

Toilet

Duravit

212101

Happy D.2

White

Master Bath

403

Toilet Seat

Duravit

0064690099

Happy D.2

White

Master Bath

403

Bathtub

Victoria & Albert

EDG-N-SW

EDGE

Matte White

1 1

Master Bath

403

Tub Spout

Newport Brass

3-995L

East Linear

Antique Brass

Wall Mounted

Master Bath

403

Shower Drain

Infinity Drain

S-AS 99

Satin Stainless

Site Sizeable

Master Bath

403

Shower Set

Newport Brass

3-1504BP

East Linear

Antique Brass

Master Bath

403

Hand Shower

Newport Brass

280H

East Linear

Antique Brass

Office

404

Faucet

Newport Brass

1500-5223

East Linear

Antique Brass

Office

404

Sink

Franke

CCK110-15

Cisterna

Fireclay White

East Linear

SUBMIT SPEC FOR APPROVAL

F.2

PLUMBING FIXTURE SCHEDULE: All plumbing fixtures to be provided by architect

NOTES

F.14

WOOD: WEATHERED CEDAR

SUBMIT SPEC FOR APPROVAL

F.15

WOOD: RECLAIMED

SUBMIT SPEC FOR APPROVAL

F.16

METAL: ANTIQUE BRONZE, SUBMIT SAMPLE FOR APPROVAL

SUBMIT SPEC FOR APPROVAL

Back Outlet Toilet Undermount

Include East Liner Handle/Diverter

F.17

METAL: BLACK IRON OR PAINTED STEEL

SUBMIT SPEC FOR APPROVAL

F.18

SUBMIT SPEC FOR APPROVAL

CLEAR SILVERED MIRROR - TEMPERED

Legend:

Issue Description

Date

ISSUE

GENERAL NOTES 1. Contractor to provide paint samples for review and approval for each room and selected colors prior to painting. All painting to be Level-4 paint finish. Assume Benjamin Moore paint for all areas. 2. Where noted, provide Shop Lacquer finish. Contractor to provide paint samples for review and approval. 3. Tile and Stone slabs are contractor furnished and install. Contractor to review slab selection with architect for review and approval.

Date

Revision

Undermount

Project Title:

RINKER RESIDENCE 344 E 84TH STREET NEW YORK, NY 10028 Floor Number:

SCHEDULES Seal & Signature:

Date: 5/26/2016 Project Number: Drawing: Checked: Drawing Number:

A-009.00

0440

Architect:

DOOR SCHEDULE LOCATION

DOOR PROPERTIES

DOOR NUMBER

ROOM

RM #

TYPE

OPENING SIZE

200

ENTRY

200

2'-10" X 7'-6"

THK. MATERIAL 1-3/4"

HINGING FINISH

H.M.

DOOR FRAME MATERIAL

LHR

FINISH

TYPE

LOCKSET

DECORATIVE MOULDING

REMARKS

HARDWARE DOOR STOP

SOLID WOOD CASING

ENTRY 3 4"

201 202

MECH. CLOSET

200 201

2'-6" X 7'-6" 2'- 10" X 7'-6"

1-3/4" 1-3/4"

H.M.

RHR

H.M.

PRIVACY

Nava Companies

FIRE RATED PLYWOOD

31 Union Square West, Suite 2D New York, NY 10003, USA

TYPICAL RATED WALL ASSEMBLY

PASSAGE

Tel: 212.365.1052 www.navacompanies.com

203

POWDER ROOM

204

2'- 10" X 7'-6"

1-3/4"

H.M.

RHR

PRIVACY

301

BEDROOM 1

301

3'-0" X 8'-0"

1-3/4"

H.M.

SLIDE

PRIVACY

302

BATHROOM 1

302

2'-10" X 7'-6"

1-3/4"

H.M.

RHR

PRIVACY

304

LOUNGE

304

10'-0" X 8'-0"

1-3/4"

H.M.

SWNG/ SLIDE

PASSAGE

305

OWEN'S BEDROOM

305

2'-10" X 8'-0"

1-3/4"

H.M.

SLIDE

PRIVACY

TRACK: HAFELE HAWA JUNIOR

306

OWEN'S BATHROOM

306

2'-10" X 8'-0"

1-3/4"

H.M.

SLIDE

PRIVACY

TRACK: HAFELE HAWA JUNIOR

401

MASTER BEDROOM

401

3'-0" X 8'-0"

1-3/4"

H.M.

SLIDE

PRIVACY

TRACK: HAFELE HAWA JUNIOR

402

WALK IN CLOSET

402

3'-0" X 8'-0"

1-3/4"

H.M.

SLIDE

PRIVACY

TRACK: HAFELE HAWA JUNIOR

DECORATIVE MOULDING

403

MASTER BATHROOM

403

2'-10" X 8'-0"

1-3/4"

H.M.

SLIDE

PRIVACY

TRACK: HAFELE HAWA JUNIOR

SOLID WOOD CASING

404

OFFICE

404

5'-0" X 8'-0"

1-3/4"

H.M.

SLIDE

PASSAGE

TRACK: HAFELE HAWA JUNIOR

405

OFFICE

404

2'-10" X 8'-0"

1-3/4"

H.M.

RHR

PASSAGE

Mechanical Engineer:

TRACK: HAFELE HAWA JUNIOR

D'Antonio Consulting Engineers, P.C. 30 West Waukena Avenue Oceanside, NY 11572, USA 576.594.4284 STONE SADDLE

Structural Engineer:

DOOR PLAN DETAIL - INSWING TYPICAL Scale: 3" = 1'0"

Robert Silman Associates 32 Old Slip, 10th Floor New York, NY 10005, USA 212.420.7970

Key Plan:

3 4"

FIRE RATED PLYWOOD TYPICAL RATED WALL ASSEMBLY

NOTE: POCKET DOOR DIMENSIONS GIVEN ARE FOR CLEAR OPENINGS. ACTUAL DOOR WIDTH TO EXTEND 1" BEYOND CLEAR OPENING (CONTRACTOR TO VERIFY DIMENSIONS IN FIELD) * MODIFY HEAD/JAMB DETAIL FOR FLUSH CONDITION WITH STONE/TILE/GLASS ** EXTEND JAMB AT INTERIOR TO PROVIDE FLUSH CONDITION WITH FINISH STONE/GLASS

Legend:

BLOCKING AS REQUIRED

Notification:

SLIDING DOOR TRACK CORNER BEAD

DOOR PLAN DETAIL - ENTRY Scale: 3" = 1'0"

BLOCKING AS REQUIRED 1 3 4" SOLID CORE DOOR

SOLID WOOD CASING 1 8" THK MASONITE, PAINTED BLACK

SOLID WOOD CASING DECORATIVE MOULDING

SOLID WOOD CASING

Issue Description

Date

ISSUE

3 4"

FIRE RATED PLYWOOD

4" FIRE RATED PLYWOOD

318"

1 34" SOLID CORE DOOR

318"

23 8"

FIRE RATED PLYWOOD

ALIGN

3 4"

1 3 4" SOLID CORE DOOR

112"

STONE SADDLE OR TYPICAL FLOOR ASSEMBLY

DECORATIVE MOULDING

DOOR PLAN DETAIL - 2ND FLOOR Scale: 3" = 1'0" SOLID WOOD CASING

SOLID WOOD CASING

DOOR HEADER DETAIL - INSWING TYPICAL 1 Scale: 3" = 1'0"

Date

Revision

DOOR HEADER DETAIL - SLIDING TYPICAL 2 Scale: 3" = 1'0"

3 4"

FIRE RATED PLYWOOD

112"

Project Title:

4" FIRE RATED PLYWOOD

RINKER RESIDENCE

TYPICAL WALL CONSTRUCTION

344 E 84TH STREET NEW YORK, NY 10028

3 4"

1 SOLID CORE DOOR FRY REGLET 'F' REVEAL

TYPICAL WALL ASSEMBLY BASE MOULDING

TYPICAL WALL ASSEMBLY

5 8"

4" 1

23 4"

318"

THK BASEBOARD, FINISHED TO MATCH FLOOR

ORIGINAL FLOOR, REFINISHED

NEW FLOOR, 3 4" ENGINEERED WOOD

Floor Number:

23 8"

1 4"

TYPICAL WALL ASSEMBLY

DOOR DETAILS

112"

Seal & Signature: 1 8"

THK MASONITE, PAINTED BLACK

3 4"

PLYWOOD SUBFLOOR

Date: 5/26/2016 Project Number: Drawing: Checked: Drawing Number:

A-010.00 8 3

BASEBOARD DETAIL - 2ND & 3RD FLOORS Scale: 3" = 1'0"

BASEBOARD DETAIL - 4TH FLOOR Scale: 3" = 1'0"

DOOR PLAN DETAIL - 2ND FLOOR Scale: 3" = 1'0"

DOOR PLAN DETAIL - 2ND FLR TERRACE Scale: 3" = 1'0"

0440

Architect: CABINET

SOLID WOOD CASING

STONE/TILE 1 8"

THK MASONITE, PAINTED BLACK SOLID WOOD CASING

3 4"

FIRE RATED PLYWOOD

SOLID WOOD CASING

3 4"

THK MASONITE, PAINTED BLACK

FIRE RATED PLYWOOD

SOLID WOOD CASING

23 8"

1 8"

THK MASONITE, PAINTED BLACK

23 8"

1 34" SOLID CORE DOOR

312"

23 8"

3 4"

31 Union Square West, Suite 2D New York, NY 10003, USA

Tel: 212.365.1052 www.navacompanies.com Mechanical Engineer:

23 8"

1 SOLID CORE DOOR

23 8"

112"

CABINET DOOR

23 8"

CABINET DOOR

CABINET EDGE

Nava Companies

112"

D'Antonio Consulting Engineers, P.C. 30 West Waukena Avenue Oceanside, NY 11572, USA 576.594.4284

112"

Structural Engineer:

SOLID WOOD CASING

1 34" SOLID CORE DOOR

SOLID WOOD CASING

4" FIRE RATED PLYWOOD

312"

TYPICAL WALL CONSTRUCTION

THK MASONITE, PAINTED BLACK

23 8"

112"

1 8"

23 8"

FRY REGLET 41" Z REVEAL

112"

DOOR PLAN DETAIL Scale: 3" = 1'0"

Key Plan: SOLID WOOD CASING

Robert Silman Associates 32 Old Slip, 10th Floor New York, NY 10005, USA 212.420.7970

FRY REGLET 41" Z REVEAL

SOLID WOOD CASING

STONE/TILE

FIRE RATED PLYWOOD

214"

SOLID WOOD CASING

3 4"

17 8"

3 4"

FIRE RATED PLYWOOD

318"

Legend:

23 4"

Notification:

DOOR PLAN DETAIL Scale: 3" = 1'0"

Issue Description

Date

ISSUE

HARDWARE SCHEDULE LOCATION DOOR ID 200 201 202 203 301 302 304 305 306 401 402 403 404 405

ROOM

HINGE SET / SLIDE TRACK MAKER

QTY FINISH

SPEC

KNOB/LEVER/OTHER MAKER

ITEM

QTY SPEC

FINISH: Inside/Outside

PRIVACY/PASSAGE LOCK SET MAKER

SPEC QTY FINISH

ENTRY MECH.

Satin Nickel

CLOSET

Rixson

F 117

Satin Nickel

POWDER RM

Rixson

F 117

Satin Nickel

BEDROOM 1

Hafele

HAWA JUNIOR 250/A

See Details

Halliday Baillie

HB-690

Brushed Nickel

BATHROOM 1 LOUNGE OWENS BEDROOM

Hafele

HAWA JUNIOR 250/A

See Details

Halliday Baillie

HB-690

Brushed Nickel

OWENS BATHROOM

Hafele

HAWA JUNIOR 250/A

See Details

Halliday Baillie

HB-690

Brushed Nickel

MASTER BEDROOM

Hafele

HAWA JUNIOR 250/A

See Details

Halliday Baillie

HB-690

Brushed Nickel

WALK IN CLOSET

Hafele

HAWA JUNIOR 250/A

See Details

Halliday Baillie

HB-690

Brushed Nickel

MASTER BATH

Hafele

HAWA JUNIOR 250/A

See Details

Halliday Baillie

HB-690

Brushed Nickel

OFFICE

Hafele

HAWA JUNIOR 250/A

See Details

Halliday Baillie

HB-690

Brushed Nickel

OFFICE

Rixson

F 117

MISCELLANEOUS ITEM

MAKER QTY SPEC

Door Stop

H.S.

DS - 202

FINISH Brushed Nickel

Date

Revision

Satin Nickel

Knob

Door Stop

H.S.

DS - 202

Brushed Nickel

Project Title:

RINKER RESIDENCE 344 E 84TH STREET NEW YORK, NY 10028 Floor Number:

DOOR DETAILS Seal & Signature:

Date: 5/26/2016 Project Number: Drawing: Checked: Drawing Number:

A-011.00 6

DOOR PLAN DETAIL Scale: 3" = 1'0"

0440

Architect:

Nava Companies 31 Union Square West, Suite 2D New York, NY 10003, USA Tel: 212.365.1052 www.navacompanies.com Mechanical Engineer: D'Antonio Consulting Engineers, P.C. 30 West Waukena Avenue Oceanside, NY 11572, USA 576.594.4284

Structural Engineer: Robert Silman Associates 32 Old Slip, 10th Floor New York, NY 10005, USA 212.420.7970

Key Plan:

Legend:

Issue Description

Date

ISSUE

Date

Revision

LONGITUDINAL SECTION Scale: 3/8" = 1'0"

CROSS SECTION Scale: 3/8" = 1'0"

Project Title:

RINKER RESIDENCE 344 E 84TH STREET NEW YORK, NY 10028 Floor Number:

SECTIONS Seal & Signature:

Date: 5/26/2016 Project Number: Drawing: Checked: Drawing Number:

A-012.00

0440

Architect:

Nava Companies 31 Union Square West, Suite 2D New York, NY 10003, USA

A-013.00

Tel: 212.365.1052 www.navacompanies.com Mechanical Engineer:

D'Antonio Consulting Engineers, P.C. 30 West Waukena Avenue Oceanside, NY 11572, USA 576.594.4284

PT.

Structural Engineer:

A-013.00

Robert Silman Associates 32 Old Slip, 10th Floor New York, NY 10005, USA 212.420.7970

02 Key Plan:

ENTRY ELEVATION Scale: 1/2" = 1'0"

Legend:

Notification:

ENTRY & POWDER ROOM PLAN Scale: 1/2" = 1'0"

5'-918"

WALLPAPER

PROVIDE MEDICINE CABINET WITH 5 ADJ. SHELVES

Issue Description

WALLPAPER

F.7

WALLPAPER

Date

ISSUE

GENERAL MILLWORK NOTES:

NOTES LEGEND:

F.7

3'-6"

01. ALL DRAWERS AND ROLL OUT SHELVES TO HAVE DOVETAIL CONSTRUCTION. SIDE WALL, FRONT AND BACK PANELS TO BE FULLY EDGED WITH SQUARE SECTION SOLID WOOD, THICKNESS TO MATCH PANEL THICKNESS. 02. ALL CABINET DOORS TO BE INSTALLED WITH CLIP TOP BLUMOTION HINGE SYSTEM UNLESS OTHERWISE NOTED 03. ALL DRAWERS AND ROLL-OUT SHELVES TO BE INSTALLED WITH TANDEM PLUS BLUMOTION DRAWER SYSTEM UNLESS OTHERWISE NOTED 04. ALL DRAWER FACES AND CABINET FACES TO HAVE 3/4" THICK SOLID WOOD STILES AND RAILS UNLESS OTHERWISE NOTED. MORTISE AND TENON ASSEMBLY TYPICAL UNLESS OTHERWISE NOTED 05. WHERE EVER PLYWOOD IS INDICATED IN CASEWORK CONSTRUCTION,(INCLUDING BACK BOXES ETC.), MILLWORKER TO FABRICATE WITH BIRCH OR MAPLE VENEER FURNITURE GRADE PLYWOOD OF THE HIGHEST QUALITY, FREE OF CHECKS, SPLITS, SCARS, AND KNOTS. 06. ALL CABINET DOORS WITH LIFT-UP DOOR MOTION TO BE INSTALLED WITH AVENTOS HK-S STAY LIFT SYSTEM BY BLUM. 07. SHOP DRAWINGS TO BE SUBMITTED FOR ALL CASEWORK ITEMS INCLUDING BUT NOT LIMITED TO RADIATOR ENCLOSURES, ACCESS PANELS, CABINETRY, VANITIES, DOORS, JAMBS, HEADERS, SILLS, MEDICINE CABINETS, AND MISC. FABRICATION TO COMMENCE ONLY UPON APPROVAL OF SHOP DRAWINGS BY ARCHITECT. 08. CONTRACTOR TO PROVIDE FINISH SAMPLES FOR ALL WOOD, METAL, GLASS (MIRRORED, EDGE FINISH, ACID/SANDBLASTED). FABRICATION TO COMMENCE ONLY UPON REVIEW AND APPROVAL BY ARCHITECT. 09. ALL BOTTOM CABINETS TO HAVE (2) ROLL OUT SHELVES UNLESS OTHERWISE NOTED 10. ALL NON-CUSTOM DECORATIVE HARDWARE TO BE INSTALLED ONLY, DECORATIVE HARDWARE TO BE FURNISHED BY OWNER. 11. STONE COUNTERTOP FURNISHED AND INSTALLED BY CONTRACTOR. CONTRACTOR TO PROVIDE NECESSARY TEMPLATES FOR BATHROOM VANITIES. 12. SOLID WOOD EDGING, ALL EXPOSED EDGES

F.7

Date

Revision

POWDER ROOM ELEVATION Scale: 1/2" = 1'0"

14.

ADJ. SHELVES

15.

NEW WINDOW

16.

SLIDING DOOR TRACK

5/8" TYP X GYP BOARD

17.

SHOP LACQUER PAINT FINISH - COLOR TBD

PLYWOOD

18.

FINISH ACCESS PANEL WITH 4 BALL CATCHES

RINKER RESIDENCE

PLYWOOD

19.

SHADE POCKET WITH MOTORIZED SHADE

BLOCKING AS REQUIRED

20.

RECESSED TELEVISION BRACKET BOX

344 E 84TH STREET NEW YORK, NY 10028

MITER EDGE

21.

CABLE GROMMET

GLASS SHELVES - STARPHIRE GLASS

CORNER BEAD

22.

FRY REGLET 14" REVEAL

23.

PROVIDE BLOCKING AT 3'0" FOR FUTURE GRAB BAR

LED STRIP LIGHT. iO Line .75 Symmetric

10.

LED STRIP LIGHT. iO Line 1.5 (SUITABLE FOR WET

TEMPERED GLASS DOOR/PANEL - STARPHIRE

INSTALLATION 24.

PLUMBING FIXTURE, SEE PLUMBING SCHEDULE

Floor Number:

ENTRY & POWDER ROOM

SHEET A-008.00

LOCATIONS) 11.

Project Title:

LED DOWNLIGHT: SEE RCP SHEET A-006.00 FOR

25.

CLEAR SILVERED MIRROR

SPECIFICATION

26.

METAL SURROUND - SEE FINISH SCHEDULE

Seal & Signature:

Date: 5/26/2016 Project Number:

12.

1" HARDWOOD NOSING

Drawing:

13.

ADJ. HANGING ROD

Checked: Drawing Number:

A-013.00

0440

Architect:

Nava Companies

PT.

31 Union Square West, Suite 2D New York, NY 10003, USA Tel: 212.365.1052 www.navacompanies.com Mechanical Engineer:

PT.

OPEN TO DINING

PT.

D'Antonio Consulting Engineers, P.C. 30 West Waukena Avenue Oceanside, NY 11572, USA 576.594.4284

PT.

Structural Engineer: Robert Silman Associates 32 Old Slip, 10th Floor New York, NY 10005, USA 212.420.7970

Key Plan:

LIVING ROOM ELEVATION Scale: 1/2" = 1'0"

LIVING ROOM ELEVATION Scale: 1 1/2" = 1'0"

GENERAL MILLWORK NOTES:

Legend:

PT.

Issue Description

Date

ISSUE

NOTES LEGEND:

A-014.00

Date

Revision

04 LIVING ROOM ELEVATION Scale: 1/2" = 1'0"

NEW WINDOW

5/8" TYP X GYP BOARD

BLOCKING AS REQUIRED

MITER EDGE

CORNER BEAD

FRY REGLET 1 4" REVEAL

LED STRIP LIGHT. iO Line .75 Symmetric

10.

LED STRIP LIGHT. iO Line 1.5 (SUITABLE FOR WET LOCATIONS)

11.

LED DOWNLIGHT: SEE RCP SHEET A-006.00 FOR SPECIFICATION

RINKER RESIDENCE

12.

1" HARDWOOD NOSING

13.

ADJ. HANGING ROD

344 E 84TH STREET NEW YORK, NY 10028

PLYWOOD

14.

ADJ. SHELVES

15.

16.

SLIDING DOOR TRACK

17.

SHOP LACQUER PAINT FINISH - COLOR TBD

18.

FINISH ACCESS PANEL WITH 4 BALL CATCHES

19.

SHADE POCKET WITH MOTORIZED SHADE

20.

RECESSED TELEVISION BRACKET BOX

21.

CABLE GROMMET

22.

23.

PROVIDE BLOCKING AT 3'0" FOR FUTURE GRAB BAR INSTALLATION

24.

PLUMBING FIXTURE, SEE PLUMBING SCHEDULE SHEET A-008.00

25.

CLEAR SILVERED MIRROR

26.

METAL SURROUND - SEE FINISH SCHEDULE

UP Project Title:

PT.

Floor Number:

GLASS SHELVES - STARPHIRE GLASS

LIVING ROOM Seal & Signature: 6'-7"

F.11

2'-0"

Date: 5/26/2016

F.11

Project Number:

TEMPERED GLASS DOOR/PANEL - STARPHIRE

Drawing: F.11

LIVING ROOM PLAN 5 Scale: 1/2" = 1'0"

F.11

Checked: Drawing Number:

A-014.00

LIVING ROOM ELEVATION Scale: 1/2" = 1'0"

0440

Architect:

Nava Companies 31 Union Square West, Suite 2D New York, NY 10003, USA Tel: 212.365.1052 www.navacompanies.com F.11

PT.

Mechanical Engineer:

OPEN TO KITCHEN

PT.

D'Antonio Consulting Engineers, P.C. 30 West Waukena Avenue Oceanside, NY 11572, USA 576.594.4284

F.11

F.7

Structural Engineer: Robert Silman Associates 32 Old Slip, 10th Floor New York, NY 10005, USA 212.420.7970

F.11 F.11

Key Plan:

EQ.

DINING ROOM ELEVATION Scale: 1/2" = 1'0"

Legend:

GENERAL MILLWORK NOTES: 01. ALL DRAWERS AND ROLL OUT SHELVES TO HAVE DOVETAIL CONSTRUCTION. SIDE WALL, FRONT AND BACK PANELS TO BE FULLY EDGED WITH SQUARE SECTION SOLID WOOD, THICKNESS TO MATCH PANEL THICKNESS. 02. ALL CABINET DOORS TO BE INSTALLED WITH CLIP TOP BLUMOTION HINGE SYSTEM UNLESS OTHERWISE NOTED 03. ALL DRAWERS AND ROLL-OUT SHELVES TO BE INSTALLED WITH TANDEM PLUS BLUMOTION DRAWER SYSTEM UNLESS OTHERWISE NOTED 04. ALL DRAWER FACES AND CABINET FACES TO HAVE 3/4" THICK SOLID WOOD STILES AND RAILS UNLESS OTHERWISE NOTED. MORTISE AND TENON ASSEMBLY TYPICAL UNLESS OTHERWISE NOTED 05. WHERE EVER PLYWOOD IS INDICATED IN CASEWORK CONSTRUCTION,(INCLUDING BACK BOXES ETC.), MILLWORKER TO FABRICATE WITH BIRCH OR MAPLE VENEER FURNITURE GRADE PLYWOOD OF THE HIGHEST QUALITY, FREE OF CHECKS, SPLITS, SCARS, AND KNOTS. 06. ALL CABINET DOORS WITH LIFT-UP DOOR MOTION TO BE INSTALLED WITH AVENTOS HK-S STAY LIFT SYSTEM BY BLUM. 07. SHOP DRAWINGS TO BE SUBMITTED FOR ALL CASEWORK ITEMS INCLUDING BUT NOT LIMITED TO RADIATOR ENCLOSURES, ACCESS PANELS, CABINETRY, VANITIES, DOORS, JAMBS, HEADERS, SILLS, MEDICINE CABINETS, AND MISC. FABRICATION TO COMMENCE ONLY UPON APPROVAL OF SHOP DRAWINGS BY ARCHITECT. 08. CONTRACTOR TO PROVIDE FINISH SAMPLES FOR ALL WOOD, METAL, GLASS (MIRRORED, EDGE FINISH, ACID/SANDBLASTED). FABRICATION TO COMMENCE ONLY UPON REVIEW AND APPROVAL BY ARCHITECT. 09. ALL BOTTOM CABINETS TO HAVE (2) ROLL OUT SHELVES UNLESS OTHERWISE NOTED 10. ALL NON-CUSTOM DECORATIVE HARDWARE TO BE INSTALLED ONLY, DECORATIVE HARDWARE TO BE FURNISHED BY OWNER. 11. STONE COUNTERTOP FURNISHED AND INSTALLED BY CONTRACTOR. CONTRACTOR TO PROVIDE NECESSARY TEMPLATES FOR BATHROOM VANITIES. 12. SOLID WOOD EDGING, ALL EXPOSED EDGES

Issue Description

Date

ISSUE

A-015.00

NOTES LEGEND:

Date

Revision

NEW WINDOW

5/8" TYP X GYP BOARD

BLOCKING AS REQUIRED

MITER EDGE

CORNER BEAD

FRY REGLET 1 4" REVEAL

LED STRIP LIGHT. iO Line .75 Symmetric

10.

LED STRIP LIGHT. iO Line 1.5 (SUITABLE FOR WET LOCATIONS)

11.

LED DOWNLIGHT: SEE RCP SHEET A-006.00 FOR SPECIFICATION

12.

1" HARDWOOD NOSING

RINKER RESIDENCE

13.

ADJ. HANGING ROD

344 E 84TH STREET NEW YORK, NY 10028

PLYWOOD

14.

ADJ. SHELVES

15.

16.

SLIDING DOOR TRACK

17.

SHOP LACQUER PAINT FINISH - COLOR TBD

18.

FINISH ACCESS PANEL WITH 4 BALL CATCHES

19.

SHADE POCKET WITH MOTORIZED SHADE

20.

RECESSED TELEVISION BRACKET BOX

21.

CABLE GROMMET

22.

23.

PROVIDE BLOCKING AT 3'0" FOR FUTURE GRAB BAR INSTALLATION

24.

PLUMBING FIXTURE, SEE PLUMBING SCHEDULE SHEET A-008.00

25.

CLEAR SILVERED MIRROR

26.

METAL SURROUND - SEE FINISH SCHEDULE

DINING ROOM PLAN Scale: 1/2" = 1'0" Project Title:

GLASS SHELVES - STARPHIRE GLASS

TEMPERED GLASS DOOR/PANEL - STARPHIRE

Floor Number:

DINING ROOM Seal & Signature:

Date: 5/26/2016 Project Number: Drawing: Checked: Drawing Number:

A-015.00

0440

EXPOSE BRICK TO ASSESS CONDITION ALTERNATE: FINISH F.7

Architect:

EXPOSE BRICK TO ASSESS CONDITION ALTERNATE: FINISH F.7

10 A-016.00

Nava Companies 31 Union Square West, Suite 2D New York, NY 10003, USA 07

Tel: 212.365.1052 www.navacompanies.com

A-016.00

F.11

Mechanical Engineer: D'Antonio Consulting Engineers, P.C. 30 West Waukena Avenue Oceanside, NY 11572, USA 576.594.4284

F.2

F.11 F.7

F.11

F.7

24 F.2

F.2

F.11

SPEED OVEN

F.11

Structural Engineer:

DISHWASHER F.11

F.11

Robert Silman Associates 32 Old Slip, 10th Floor New York, NY 10005, USA 212.420.7970

A-016.00

F.11

09 A-016.00

Key Plan: 2'-618"

EQ. 06

EQ.

2'-0"

6'-01

A-016.00

PROVIDE HAFELE MAGIC CORNER I PULL OUT

EQ.

2'-0"

6'-5"

PROVIDE HAFELE MAGIC CORNER I PULL OUT

KITCHEN ELEVATION Scale: 1/2" = 1'0"

EQ.

2'-9" 3'-1012"

EQ.

EQ. 4'-9"

PROVIDE HAFELE 503.88.991 DOUBLE PULL OUT TRASH

KITCHEN ELEVATION Scale: 1/2" = 1'0"

GENERAL MILLWORK NOTES:

KITCHEN ELEVATION Scale: 1/2" = 1'0"

FINISH F.15

Legend:

212"

2'-9"

1'-0"

FINISH F.15

3'-81 4"

A-016.00

6'-012"

2'-712"

212"

2'-0"

Issue Description

Date

ISSUE 1'-912"

02 3'-6"

Notification:

DW 07

1'-018"

1'-0" 11

2'-3"

A-016.00

10 SLIDE

47 8"

NOTES LEGEND:

CABINET SECTION Scale: 1 1/2" = 1'0"

07 2.

5/8" TYP X GYP BOARD

BLOCKING AS REQUIRED

MITER EDGE

CORNER BEAD

FRY REGLET 1 4" REVEAL

LED STRIP LIGHT. iO Line .75 Symmetric

10.

LED STRIP LIGHT. iO Line 1.5 (SUITABLE FOR WET LOCATIONS)

11.

LED DOWNLIGHT: SEE RCP SHEET A-006.00 FOR SPECIFICATION

12.

1" HARDWOOD NOSING

13.

ADJ. HANGING ROD

14.

ADJ. SHELVES

15.

16.

SLIDING DOOR TRACK

17.

SHOP LACQUER PAINT FINISH - COLOR TBD

18.

FINISH ACCESS PANEL WITH 4 BALL CATCHES

19.

SHADE POCKET WITH MOTORIZED SHADE

20.

RECESSED TELEVISION BRACKET BOX

21.

CABLE GROMMET

22.

23.

PROVIDE BLOCKING AT 3'0" FOR FUTURE GRAB BAR INSTALLATION

24.

PLUMBING FIXTURE, SEE PLUMBING SCHEDULE SHEET A-008.00

25.

CLEAR SILVERED MIRROR

26.

METAL SURROUND - SEE FINISH SCHEDULE

PLYWOOD

1118"

PLYWOOD

KITCHEN PLAN Scale: 1/2" = 1'0"

8" 07

Project Title:

2" GLASS SHELVES - STARPHIRE GLASS

RINKER RESIDENCE 344 E 84TH STREET NEW YORK, NY 10028

TEMPERED GLASS DOOR/PANEL - STARPHIRE

3'-0"

1'-93 4"

3'-0"

Floor Number:

KITCHEN

CABINET SECTION Scale: 1 1/2" = 1'0"

Seal & Signature:

Date: 5/26/2016

11 4"

Project Number:

Drawing: Checked:

4" 4"

Drawing Number: 3

A-016.00

SLIDE

1'-11 4"

Date

Revision

7'-012"

SLIDE

NEW WINDOW

CABINET SECTION 6 Scale: 1 1/2" = 1'0"

CABINET SECTION Scale: 1 1/2" = 1'0"

CABINET DETAIL Scale: 3" = 1'0"

CABINET SECTION Scale: 1 1/2" = 1'0"

0440

Architect:

Nava Companies 31 Union Square West, Suite 2D New York, NY 10003, USA Tel: 212.365.1052 www.navacompanies.com

02 Mechanical Engineer: D'Antonio Consulting Engineers, P.C. 30 West Waukena Avenue Oceanside, NY 11572, USA 576.594.4284

A-017.00

03 Structural Engineer: 04 A-016

Robert Silman Associates 32 Old Slip, 10th Floor New York, NY 10005, USA 212.420.7970

Key Plan:

TERRACE PLAN Scale: 1/2" = 1'0"

TERRACE ELEVATION Scale: 1/2" = 1'0" Legend:

HANDRAIL DETAIL 4 Scale: 1 1/2" = 1'0"

Issue Description ISSUE

NEW WINDOW

5/8" TYP X GYP BOARD

BLOCKING AS REQUIRED

MITER EDGE

CORNER BEAD

FRY REGLET 14" REVEAL

LED STRIP LIGHT. iO Line .75 Symmetric

10.

LED STRIP LIGHT. iO Line 1.5 (SUITABLE FOR WET LOCATIONS)

11.

LED DOWNLIGHT: SEE RCP SHEET A-006.00 FOR SPECIFICATION

12.

1" HARDWOOD NOSING

13.

ADJ. HANGING ROD

14.

ADJ. SHELVES

15.

16.

SLIDING DOOR TRACK

17.

SHOP LACQUER PAINT FINISH - COLOR TBD

18.

FINISH ACCESS PANEL WITH 4 BALL CATCHES

19.

SHADE POCKET WITH MOTORIZED SHADE

20.

RECESSED TELEVISION BRACKET BOX

21.

CABLE GROMMET

22.

23.

PROVIDE BLOCKING AT 3'0" FOR FUTURE GRAB BAR INSTALLATION

24.

PLUMBING FIXTURE, SEE PLUMBING SCHEDULE SHEET A-008.00

25.

CLEAR SILVERED MIRROR

26.

METAL SURROUND - SEE FINISH SCHEDULE

Date

Revision

NOTES LEGEND: 1.

Date

PLYWOOD

GLASS SHELVES - STARPHIRE GLASS

TEMPERED GLASS DOOR/PANEL - STARPHIRE

Project Title:

RINKER RESIDENCE 3

TERRACE ELEVATION Scale: 1/2" = 1'0"

344 E 84TH STREET NEW YORK, NY 10028 Floor Number:

TERRACE Seal & Signature:

Date: 5/26/2016 Project Number: Drawing: Checked: Drawing Number:

A-017.00

0440

Architect:

Nava Companies 31 Union Square West, Suite 2D New York, NY 10003, USA Tel: 212.365.1052 www.navacompanies.com Mechanical Engineer: OPEN TO LOUNGE

D'Antonio Consulting Engineers, P.C. 30 West Waukena Avenue Oceanside, NY 11572, USA 576.594.4284

W/D

Structural Engineer: Robert Silman Associates 32 Old Slip, 10th Floor New York, NY 10005, USA 212.420.7970

Key Plan:

CORRIDOR 1 ELEVATION Scale: 1/2" = 1'0"

Legend:

GENERAL MILLWORK NOTES:

20'-81 4"

3'-0"

1'-7"

10'-01 4"

5/8" TYP X GYP BOARD

BLOCKING AS REQUIRED

MITER EDGE

CORNER BEAD

FRY REGLET 14" REVEAL

LED STRIP LIGHT. iO Line .75 Symmetric

10.

LED STRIP LIGHT. iO Line 1.5 (SUITABLE FOR WET LOCATIONS)

11.

LED DOWNLIGHT: SEE RCP SHEET A-006.00 FOR SPECIFICATION

12.

1" HARDWOOD NOSING

13.

ADJ. HANGING ROD

PLYWOOD

A-018.00

Issue Description

Date

ISSUE

3'-1012" 20'-81 4"

NOTES LEGEND: NEW WINDOW

2'-10"

Notification:

16'-93 4"

2'-5"

Date

Revision

CORRIDOR 1 PLAN Scale: 1/2" = 1'0"

PLYWOOD

Project Title:

RINKER RESIDENCE 344 E 84TH STREET NEW YORK, NY 10028

14.

ADJ. SHELVES

15.

16.

SLIDING DOOR TRACK

17.

SHOP LACQUER PAINT FINISH - COLOR TBD

18.

FINISH ACCESS PANEL WITH 4 BALL CATCHES

19.

SHADE POCKET WITH MOTORIZED SHADE

20.

RECESSED TELEVISION BRACKET BOX

21.

CABLE GROMMET

22.

23.

PROVIDE BLOCKING AT 3'0" FOR FUTURE GRAB BAR INSTALLATION

Drawing:

24.

PLUMBING FIXTURE, SEE PLUMBING SCHEDULE SHEET A-008.00

Checked:

25.

CLEAR SILVERED MIRROR

Drawing Number:

26.

METAL SURROUND - SEE FINISH SCHEDULE

GLASS SHELVES - STARPHIRE GLASS

TEMPERED GLASS DOOR/PANEL - STARPHIRE

Floor Number:

CORRIDOR 1 Seal & Signature:

Date: 5/26/2016 Project Number:

A-018.00

0440

Architect:

Nava Companies 06 A-018

31 Union Square West, Suite 2D New York, NY 10003, USA Tel: 212.365.1052 www.navacompanies.com Mechanical Engineer:

SLIDE

D'Antonio Consulting Engineers, P.C. 30 West Waukena Avenue Oceanside, NY 11572, USA 576.594.4284

Structural Engineer: Robert Silman Associates 32 Old Slip, 10th Floor New York, NY 10005, USA 212.420.7970

Key Plan:

BEDROOM 1 ELEVATION Scale: 1/2" = 1'0"

GENERAL MILLWORK NOTES: Legend:

Issue Description

Date

ISSUE

A-019.00

NOTES LEGEND: 1.

Date

Revision

NEW WINDOW

5/8" TYP X GYP BOARD

BLOCKING AS REQUIRED

MITER EDGE

CORNER BEAD

FRY REGLET 14" REVEAL

LED STRIP LIGHT. iO Line .75 Symmetric

10.

LED STRIP LIGHT. iO Line 1.5 (SUITABLE FOR WET LOCATIONS)

11.

LED DOWNLIGHT: SEE RCP SHEET A-006.00 FOR SPECIFICATION

12.

1" HARDWOOD NOSING

13.

ADJ. HANGING ROD

RINKER RESIDENCE

14.

ADJ. SHELVES

15.

344 E 84TH STREET NEW YORK, NY 10028

16.

SLIDING DOOR TRACK

17.

SHOP LACQUER PAINT FINISH - COLOR TBD

18.

FINISH ACCESS PANEL WITH 4 BALL CATCHES

19.

SHADE POCKET WITH MOTORIZED SHADE

20.

RECESSED TELEVISION BRACKET BOX

PLYWOOD

BEDROOM 1 PLAN Scale: 1/2" = 1'0"

Project Title:

GLASS SHELVES - STARPHIRE GLASS

21.

CABLE GROMMET

22.

23.

PROVIDE BLOCKING AT 3'0" FOR FUTURE GRAB BAR INSTALLATION

24.

PLUMBING FIXTURE, SEE PLUMBING SCHEDULE SHEET A-008.00

25.

CLEAR SILVERED MIRROR

26.

METAL SURROUND - SEE FINISH SCHEDULE

7'-10"

PLYWOOD

Floor Number:

BEDROOM 1

TEMPERED GLASS DOOR/PANEL - STARPHIRE

Seal & Signature:

Date: 5/26/2016 Project Number: Drawing: Checked:

2'-0"

Drawing Number: 312"

MILLWORK DETAIL Scale: 1 1/2" = 1'0"

A-019.00

0440

Architect:

Nava Companies 31 Union Square West, Suite 2D New York, NY 10003, USA

07 A-020.00

PT.

Tel: 212.365.1052 www.navacompanies.com

PT.

F.18

Mechanical Engineer:

F.9

D'Antonio Consulting Engineers, P.C. 30 West Waukena Avenue Oceanside, NY 11572, USA 576.594.4284

F.9

1'-103 8"

06 F.9 A-020.00

3'-2"

Structural Engineer:

3'-6"

F.9

Robert Silman Associates 32 Old Slip, 10th Floor New York, NY 10005, USA 212.420.7970

F.9

2'-6"

Key Plan:

BATHROOM 1 ELEVATION Scale: 1/2" = 1'0"

GENERAL MILLWORK NOTES: Legend:

01 06 F.5

F.15

03 2"

2'-10"

F.9

F.5

A-020.00

10"

5'-8"

F.5

F.15

F.9

ISSUE

10"

F.15

CEMENT BOARD

F.9

Date

03 2"

3'-512"

THINSET LATICRETE 9235

Notification:

Issue Description

LATICRETE 9235

11"

MARINE GRADE PLYWOOD

06 10"

F.15 1'-0" 03

NOTES LEGEND: 2'-83 8"

2'-05 8"

3'-0"

Date

Revision

NEW WINDOW

5/8" TYP X GYP BOARD

BLOCKING AS REQUIRED

MITER EDGE

CORNER BEAD

FRY REGLET 14" REVEAL

LED STRIP LIGHT. iO Line .75 Symmetric

10.

LED STRIP LIGHT. iO Line 1.5 (SUITABLE FOR WET LOCATIONS)

11.

LED DOWNLIGHT: SEE RCP SHEET A-006.00 FOR SPECIFICATION

12.

1" HARDWOOD NOSING

13.

ADJ. HANGING ROD

14.

ADJ. SHELVES

15.

16.

SLIDING DOOR TRACK

17.

SHOP LACQUER PAINT FINISH - COLOR TBD

18.

FINISH ACCESS PANEL WITH 4 BALL CATCHES

19.

SHADE POCKET WITH MOTORIZED SHADE

20.

RECESSED TELEVISION BRACKET BOX

21.

CABLE GROMMET

22.

23.

PROVIDE BLOCKING AT 3'0" FOR FUTURE GRAB BAR INSTALLATION

Project Number:

24.

PLUMBING FIXTURE, SEE PLUMBING SCHEDULE SHEET A-008.00

Drawing:

25.

CLEAR SILVERED MIRROR

Checked:

26.

METAL SURROUND - SEE FINISH SCHEDULE

Drawing Number:

27.

STEEL ANGLE

PLYWOOD

GLASS SHELVES - STARPHIRE GLASS

TEMPERED GLASS DOOR/PANEL - STARPHIRE

BATHROOM 1 PLAN Scale: 1/2" = 1'0"

TUB DETAIL Scale: 1 1/2" = 1'0"

Project Title:

SHELF DETAIL 7 Scale: 1 1/2" = 1'0"

RINKER RESIDENCE 344 E 84TH STREET NEW YORK, NY 10028 Floor Number:

BATHROOM 1 Seal & Signature:

Date: 5/26/2016

A-020.00

0440

Architect: 26

PT.

Nava Companies

PT.

31 Union Square West, Suite 2D New York, NY 10003, USA

PT.

A-021.00

Tel: 212.365.1052 www.navacompanies.com PT.

Mechanical Engineer: D'Antonio Consulting Engineers, P.C. 30 West Waukena Avenue Oceanside, NY 11572, USA 576.594.4284

F.12

PT.

A-021.00

F.13

A-021.00

F.13

Structural Engineer:

F.13

2'-7"

F.13

EQ.

F.13

Robert Silman Associates 32 Old Slip, 10th Floor New York, NY 10005, USA 212.420.7970

EQ.

Key Plan:

08 A-021.00

LOUNGE ELEVATION Scale: 1/2" = 1'0"

14'-014"

GENERAL MILLWORK NOTES:

2'-0"

Legend:

Notification:

412" 1"

F.13

1'-6"

4'-53 8"

F.13

1'-10"

Issue Description ISSUE

312"

A-021.00

F.13 14

MILLWORK DETAIL Scale: 1 1/2" = 1'0" 8'-014"

5/8" TYP X GYP BOARD

BLOCKING AS REQUIRED

MITER EDGE

CORNER BEAD

FRY REGLET 1 4" REVEAL

LED STRIP LIGHT. iO Line .75 Symmetric

10.

LED STRIP LIGHT. iO Line 1.5 (SUITABLE FOR WET

PLYWOOD

LOUNGE PLAN Scale: 1/2" = 1'0" F.13

F.13

Project Title: 33 8"

NEW WINDOW

RINKER RESIDENCE

LOCATIONS) 11.

344 E 84TH STREET NEW YORK, NY 10028

LED DOWNLIGHT: SEE RCP SHEET A-006.00 FOR SPECIFICATION

12.

1" HARDWOOD NOSING

13.

ADJ. HANGING ROD

Date

Revision

2'-1"

NOTES LEGEND: 1.

Date

1'-6"

10'-014"

2'-0"

Floor Number:

ADJ. SHELVES

15.

16.

SLIDING DOOR TRACK

17.

SHOP LACQUER PAINT FINISH - COLOR TBD

18.

FINISH ACCESS PANEL WITH 4 BALL CATCHES

19.

SHADE POCKET WITH MOTORIZED SHADE

Project Number:

20.

RECESSED TELEVISION BRACKET BOX

Drawing:

21.

CABLE GROMMET

Checked:

22.

Drawing Number:

23.

PROVIDE BLOCKING AT 3'0" FOR FUTURE GRAB BAR

2'-7"

LOUNGE Seal & Signature:

TEMPERED GLASS DOOR/PANEL - STARPHIRE

312"

F.13

GLASS SHELVES - STARPHIRE GLASS

312"

2'-7"

14.

A-021.00

INSTALLATION 24.

PLUMBING FIXTURE, SEE PLUMBING SCHEDULE SHEET A-008.00

25.

CLEAR SILVERED MIRROR

26.

METAL SURROUND - SEE FINISH SCHEDULE

Date: 5/26/2016

MILLWORK DETAIL Scale: 1 1/2" = 1'0"

0440

Architect:

Nava Companies 31 Union Square West, Suite 2D New York, NY 10003, USA

06 A-019

Tel: 212.365.1052 www.navacompanies.com Mechanical Engineer:

SLIDE

D'Antonio Consulting Engineers, P.C. 30 West Waukena Avenue Oceanside, NY 11572, USA 576.594.4284

SLIDE

Structural Engineer: Robert Silman Associates 32 Old Slip, 10th Floor New York, NY 10005, USA 212.420.7970

Key Plan:

OWEN'S BEDROOM ELEVATION Scale: 1/2" = 1'0"

GENERAL MILLWORK NOTES: 5'-218"

73 8"

OWEN'S BEDROOM ELEVATION Scale: 1/2" = 1'0"

Legend:

11'-6" 5'-812"

Notification:

4'-312"

Issue Description

Date

ISSUE

4'-23 4"

11'-614"

A-022.00

NOTES LEGEND: NEW WINDOW

5/8" TYP X GYP BOARD

BLOCKING AS REQUIRED

MITER EDGE

CORNER BEAD

FRY REGLET 1 4" REVEAL

LED STRIP LIGHT. iO Line .75 Symmetric

10.

LED STRIP LIGHT. iO Line 1.5 (SUITABLE FOR WET LOCATIONS)

11.

LED DOWNLIGHT: SEE RCP SHEET A-006.00 FOR SPECIFICATION

12.

1" HARDWOOD NOSING

13.

ADJ. HANGING ROD

PLYWOOD

14.

ADJ. SHELVES

15.

16.

SLIDING DOOR TRACK

17.

SHOP LACQUER PAINT FINISH - COLOR TBD

18.

FINISH ACCESS PANEL WITH 4 BALL CATCHES

19.

SHADE POCKET WITH MOTORIZED SHADE

20.

RECESSED TELEVISION BRACKET BOX

21.

CABLE GROMMET

22.

23.

PROVIDE BLOCKING AT 3'0" FOR FUTURE GRAB BAR INSTALLATION

24.

PLUMBING FIXTURE, SEE PLUMBING SCHEDULE SHEET A-008.00

25.

CLEAR SILVERED MIRROR

26.

METAL SURROUND - SEE FINISH SCHEDULE

3'-0"

Date

Revision

GLASS SHELVES - STARPHIRE GLASS

TEMPERED GLASS DOOR/PANEL - STARPHIRE

2'-10"

6'-0" 11'-6"

2'-8"

Project Title:

RINKER RESIDENCE 5

OWEN'S BEDROOM PLAN Scale: 1/2" = 1'0"

344 E 84TH STREET NEW YORK, NY 10028 Floor Number:

OWEN'S BEDROOM Seal & Signature:

Date: 5/26/2016 Project Number: Drawing: Checked: Drawing Number:

A-022.00

0440

Architect:

Nava Companies

PT.

PROVIDE MEDICINE CABINET WITH ADJ. SHELVES

F.18

31 Union Square West, Suite 2D New York, NY 10003, USA

PT.

F.12

Tel: 212.365.1052 www.navacompanies.com

PT.

Mechanical Engineer:

22 08

D'Antonio Consulting Engineers, P.C. 30 West Waukena Avenue Oceanside, NY 11572, USA 576.594.4284

A-023.00

SLIDE

F.10 F.10

F.10

F.12

F.5

F.12

F.10

A-023.00

F.12

F.10

A-023.00

Structural Engineer:

F.10

F.12

Robert Silman Associates 32 Old Slip, 10th Floor New York, NY 10005, USA 212.420.7970

F.10

Key Plan:

OWEN'S BATHROOM ELEVATION Scale: 1/2" = 1'0"

OWEN'S BATHROOM SHOWER ELEVATION Scale: 1/2" = 1'0"

OWEN'S BATHROOM ELEVATION Scale: 1/2" = 1'0"

GENERAL MILLWORK NOTES: 2'-8"

2'-0"

F.2 114"

Legend:

1'-8"

F.12

A-023.00

2'-81

1018"

F.12

F.12 F.12

Issue Description

1'-0"

2'-6"

4'-2"

Date

ISSUE

A-023.00 4"

VANITY DETAIL Scale: 1 1/2" = 1'0"

NOTES LEGEND: 1.

NEW WINDOW

5/8" TYP X GYP BOARD

BLOCKING AS REQUIRED

MITER EDGE

CORNER BEAD

FRY REGLET 14" REVEAL

LED STRIP LIGHT. iO Line .75 Symmetric

10.

LED STRIP LIGHT. iO Line 1.5 (SUITABLE FOR WET LOCATIONS)

11.

LED DOWNLIGHT: SEE RCP SHEET A-006.00 FOR SPECIFICATION

12.

1" HARDWOOD NOSING

13.

ADJ. HANGING ROD

14.

ADJ. SHELVES

15.

16.

SLIDING DOOR TRACK

17.

SHOP LACQUER PAINT FINISH - COLOR TBD

18.

FINISH ACCESS PANEL WITH 4 BALL CATCHES

19.

SHADE POCKET WITH MOTORIZED SHADE

20.

RECESSED TELEVISION BRACKET BOX

21.

CABLE GROMMET

22.

23.

PROVIDE BLOCKING AT 3'0" FOR FUTURE GRAB BAR INSTALLATION

24.

PLUMBING FIXTURE, SEE PLUMBING SCHEDULE SHEET A-008.00

PLYWOOD

OWEN'S BATHROOM PLAN Scale: 1/2" = 1'0"

112"

1'-17 8"

F.2

Project Title:

SLOPE 81" PER 1'0"

RINKER RESIDENCE

F.12

GLASS SHELVES - STARPHIRE GLASS

F.10

PROVIDE HOLES IN SIDE OF HAMPER FOR VENTILATION

1'-8"

3'-0"

2'-35 8"

2'-912"

PLYWOOD

344 E 84TH STREET NEW YORK, NY 10028 Floor Number:

OWEN'S BATHROOM

TEMPERED GLASS DOOR/PANEL - STARPHIRE

25.

CLEAR SILVERED MIRROR

26.

METAL SURROUND - SEE FINISH SCHEDULE

Seal & Signature:

Date: 5/26/2016 Project Number:

Drawing: Checked:

Date

Revision

Drawing Number:

F.12

A-023.00 7

MILLWORK DETAIL Scale: 1 1/2" = 1'0"

VANITY DETAIL Scale: 1 1/2" = 1'0"

0440

Architect:

Structural Engineer:

05 A-023

Robert Silman Associates 32 Old Slip, 10th Floor New York, NY 10005, USA 212.420.7970

Key Plan:

CORRDIOR 2 ELEVATION Scale: 1/2" = 1'0"

CORRDIOR 2 ELEVATION Scale: 1/2" = 1'0" Legend:

Notification: 13'-3" 3'-0"

618"

1'-77 8"

3'-0"

Issue Description ISSUE

A-023

6'-111 4"

4'-0"

NOTES LEGEND: 1.

Date

Revision

NEW WINDOW

5/8" TYP X GYP BOARD

BLOCKING AS REQUIRED

MITER EDGE

CORNER BEAD

FRY REGLET 14" REVEAL

LED STRIP LIGHT. iO Line .75 Symmetric

10.

LED STRIP LIGHT. iO Line 1.5 (SUITABLE FOR WET LOCATIONS)

11.

LED DOWNLIGHT: SEE RCP SHEET A-006.00 FOR SPECIFICATION

12.

1" HARDWOOD NOSING

13.

ADJ. HANGING ROD

14.

ADJ. SHELVES

15.

16.

SLIDING DOOR TRACK

17.

SHOP LACQUER PAINT FINISH - COLOR TBD

18.

FINISH ACCESS PANEL WITH 4 BALL CATCHES

19.

SHADE POCKET WITH MOTORIZED SHADE

20.

RECESSED TELEVISION BRACKET BOX

21.

CABLE GROMMET

22.

23.

PROVIDE BLOCKING AT 3'0" FOR FUTURE GRAB BAR INSTALLATION

24.

PLUMBING FIXTURE, SEE PLUMBING SCHEDULE SHEET A-008.00

25.

CLEAR SILVERED MIRROR

26.

METAL SURROUND - SEE FINISH SCHEDULE

PLYWOOD

10'-612" 13'-3"

Project Title:

RINKER RESIDENCE

CORRDIOR 2 PLAN Scale: 1/2" = 1'0"

344 E 84TH STREET NEW YORK, NY 10028

GLASS SHELVES - STARPHIRE GLASS

Floor Number:

CORRIDOR 2 Seal & Signature:

Date: 5/26/2016 Project Number:

TEMPERED GLASS DOOR/PANEL - STARPHIRE

HANDRAIL DETAIL Scale: 3" = 1'0"

Drawing: Checked: Drawing Number:

A-024.00

0440

Architect:

Nava Companies

06 A-024

31 Union Square West, Suite 2D New York, NY 10003, USA Tel: 212.365.1052 www.navacompanies.com Mechanical Engineer: D'Antonio Consulting Engineers, P.C. 30 West Waukena Avenue Oceanside, NY 11572, USA 576.594.4284

Structural Engineer: Robert Silman Associates 32 Old Slip, 10th Floor New York, NY 10005, USA 212.420.7970

Key Plan:

MASTER BEDROOM ELEVATION Scale: 1/2" = 1'0"

Legend:

Notification:

5'-918"

Issue Description

Date

ISSUE

A-025.00

04 SLIDE

4'-0"

2'-1114"

NOTES LEGEND:

Date

Revision

NEW WINDOW

5/8" TYP X GYP BOARD

BLOCKING AS REQUIRED

MITER EDGE

CORNER BEAD

FRY REGLET 14" REVEAL

LED STRIP LIGHT. iO Line .75 Symmetric

10.

LED STRIP LIGHT. iO Line 1.5 (SUITABLE FOR WET LOCATIONS)

11.

LED DOWNLIGHT: SEE RCP SHEET A-006.00 FOR SPECIFICATION

12.

1" HARDWOOD NOSING

RINKER RESIDENCE

13.

ADJ. HANGING ROD

14.

ADJ. SHELVES

344 E 84TH STREET NEW YORK, NY 10028

15.

16.

SLIDING DOOR TRACK

17.

SHOP LACQUER PAINT FINISH - COLOR TBD

18.

FINISH ACCESS PANEL WITH 4 BALL CATCHES

19.

SHADE POCKET WITH MOTORIZED SHADE

20.

RECESSED TELEVISION BRACKET BOX

PLYWOOD

MASTER BEDROOM PLAN Scale: 1/2" = 1'0"

MASTER BEDROOM ELEVATION Scale: 1/2" = 1'0"

Project Title:

GLASS SHELVES - STARPHIRE GLASS

Floor Number:

MASTER BEDROOM

21.

CABLE GROMMET

22.

23.

PROVIDE BLOCKING AT 3'0" FOR FUTURE GRAB BAR INSTALLATION

24.

PLUMBING FIXTURE, SEE PLUMBING SCHEDULE SHEET A-008.00

25.

CLEAR SILVERED MIRROR

Checked:

26.

METAL SURROUND - SEE FINISH SCHEDULE

Drawing Number:

TEMPERED GLASS DOOR/PANEL - STARPHIRE

Seal & Signature:

Date: 5/26/2016 Project Number: Drawing:

A-025.00

0440

Architect:

PT.

Nava Companies

31 Union Square West, Suite 2D New York, NY 10003, USA

A-026.00

PT.

F.11

A-026.00

F.11

Tel: 212.365.1052 www.navacompanies.com

F.11

Mechanical Engineer:

2'-6"

SLIDE

PT.

F.7

F.11

D'Antonio Consulting Engineers, P.C. 30 West Waukena Avenue Oceanside, NY 11572, USA 576.594.4284

F.11

Structural Engineer: 07

A-026.00

F.11

3'-0"

PT.

Robert Silman Associates 32 Old Slip, 10th Floor New York, NY 10005, USA 212.420.7970

F.11

Key Plan: 3'-07 8"

2'-0"

OFFICE ELEVATION Scale: 1/2" = 1'0"

2'-0"

OFFICE ELEVATION Scale: 1/2" = 1'0"

GENERAL MILLWORK NOTES: Legend: 4"

NEW WINDOW

5/8" TYP X GYP BOARD

BLOCKING AS REQUIRED

MITER EDGE

CORNER BEAD

FRY REGLET 14" REVEAL

LED STRIP LIGHT. iO Line .75 Symmetric

10.

LED STRIP LIGHT. iO Line 1.5 (SUITABLE FOR WET LOCATIONS)

11.

LED DOWNLIGHT: SEE RCP SHEET A-006.00 FOR SPECIFICATION

12.

1" HARDWOOD NOSING

13.

ADJ. HANGING ROD

Notification:

1'-9"

PT.

1'-2"

F.15

F.15 1'-0"

1'-1112"

PT.

212"

2'-115 8"

F.11

F.11 F.11

F.11

1'-0"

01 4'-0"

EQ.

4'-0" 1"

15'-03 4"

A-026.00

212"

1'-0"

Date

ISSUE 1'-2"

2'-6"

F.11

Issue Description

PT.

03 4

OFFICE ELEVATION Scale: 1/2" = 1'0"

MILLWORK DETAIL Scale: 1 1/2" = 1'0"

Date

Revision

PLYWOOD

F.2 4"

27 3

114"

F.15 14

4'-0"

212"

PT.

NOTES LEGEND: 1.

27 1'-0"

PT.

10'-112"

19.

SHADE POCKET WITH MOTORIZED SHADE

20.

RECESSED TELEVISION BRACKET BOX

21.

CABLE GROMMET

22.

23.

PROVIDE BLOCKING AT 3'0" FOR FUTURE GRAB BAR INSTALLATION

24.

PLUMBING FIXTURE, SEE PLUMBING SCHEDULE SHEET A-008.00

25.

CLEAR SILVERED MIRROR

26.

METAL SURROUND - SEE FINISH SCHEDULE

27.

STEEL ANGLE

43 4"

Floor Number:

TEMPERED GLASS DOOR/PANEL - STARPHIRE

PROVIDE (1) HANGING ROD (3) ADJ. SHELVES

MASTER BEDROOM Seal & Signature:

Date: 5/26/2016 Project Number:

Drawing:

OFFICE PLAN 5 Scale: 1/2" = 1'0"

Checked: Drawing Number:

312"

344 E 84TH STREET NEW YORK, NY 10028

FINISH ACCESS PANEL WITH 4 BALL CATCHES

RINKER RESIDENCE

33 8" 1"

18.

Project Title:

718"

SHOP LACQUER PAINT FINISH - COLOR TBD

1'-07 8"

17.

33 8"

SLIDING DOOR TRACK

GLASS SHELVES - STARPHIRE GLASS

2'-112"

16.

2'-07 8"

15.

7'-1"

2'-0"

ADJ. SHELVES 1

4'-6"

2'-111 4"

14.

A-026.00

MILLWORK DETAIL Scale: 1 1/2" = 1'0"

0440

Architect:

Nava Companies

2'-3"

PT.

A-027.00

31 Union Square West, Suite 2D New York, NY 10003, USA Tel: 212.365.1052 www.navacompanies.com

6'-0"

SLIDE

D'Antonio Consulting Engineers, P.C. 30 West Waukena Avenue Oceanside, NY 11572, USA 576.594.4284

SLIDE

5'-2"

Mechanical Engineer:

PT.

Structural Engineer:

1'-2"

Robert Silman Associates 32 Old Slip, 10th Floor New York, NY 10005, USA 212.420.7970

Key Plan: EQ.

EQ.

WALK IN CLOSET ELEVATION Scale: 1/2" = 1'0"

GENERAL MILLWORK NOTES:

PROVIDE (1) HANGING ROD (3) ADJ. SHELVES

WALK IN CLOSET ELEVATION Scale: 1/2" = 1'0"

BLOCKING AS REQUIRED

MITER EDGE

CORNER BEAD

FRY REGLET 1 4" REVEAL

LED STRIP LIGHT. iO Line .75 Symmetric

10.

LED STRIP LIGHT. iO Line 1.5 (SUITABLE FOR WET LOCATIONS)

11.

LED DOWNLIGHT: SEE RCP SHEET A-006.00 FOR SPECIFICATION

12.

1" HARDWOOD NOSING

13.

ADJ. HANGING ROD

14.

ADJ. SHELVES

15.

16.

SLIDING DOOR TRACK

17.

SHOP LACQUER PAINT FINISH - COLOR TBD

18.

FINISH ACCESS PANEL WITH 4 BALL CATCHES

19.

SHADE POCKET WITH MOTORIZED SHADE

20.

RECESSED TELEVISION BRACKET BOX

21.

CABLE GROMMET

22.

23.

PROVIDE BLOCKING AT 3'0" FOR FUTURE GRAB BAR INSTALLATION

24.

PLUMBING FIXTURE, SEE PLUMBING SCHEDULE SHEET A-008.00

EQ. 2'-23 8"

EQ.

09 A-027.00

Date

ISSUE

7'-2"

A-027.00

02 14

EQ.

7'-73 8"

1'-5"

2'-07 8" 14 17

Date

Revision 14

PLYWOOD

7'-07 8"

SLIDE

11"

WALK IN CLOSET PLAN Scale: 1/2" = 1'0"

PROVIDE (2) HANGING RODS (1) ADJ. SHELF

SLIDE

57 8"

PROVIDE (1) HANGING ROD (3) ADJ. SHELVES

10 A-027.00

SLIDE

Project Title:

RINKER RESIDENCE 344 E 84TH STREET NEW YORK, NY 10028

11"

GLASS SHELVES - STARPHIRE GLASS

SLIDE 4" 3

METAL SURROUND - FINISH F.16

Seal & Signature:

PULL DETAIL Scale: 3" = 1'0"

MILLWORK DETAIL Scale: 1 1/2" = 1'0"

Drawing: Checked: Drawing Number:

A-027.00

Date: 5/26/2016 Project Number:

SLIDE

3 1

DRESSING ROOM

112"

CLEAR SILVERED MIRROR

SLIDE

112"

TYPICAL EDGE DETAIL Scale: 3" = 1'0"

SLIDE

LINE OF SHELF/DRAWER BEYOND 111 4"

Floor Number:

87 8"

11"

TEMPERED GLASS DOOR/PANEL - STARPHIRE

1'-1"

Issue Description

26.

VARIES, SEE PLAN

118"

25.

LINE OF LED STRIP BEYOND

1'-5"

5/8" TYP X GYP BOARD

Legend:

1'-113 8"

WALK IN CLOSET ELEVATION Scale: 1/2" = 1'0"

LINE OF LED STRIP BEYOND

NOTES LEGEND: NEW WINDOW

PROVIDE (2) HANGING RODS (1) ADJ. SHELF

PROVIDE (3) ADJ. SHELVES (4) SLIDES SEE DETAIL 08

EQ. 4'-8"

7'-11 4"

7'-73 8"

EQ.

112"

EQ.

MILLWORK DETAIL Scale: 1 1/2" = 1'0"

0440

Architect:

PT. F.6

2'-3"

Nava Companies

2'-3"

31 Union Square West, Suite 2D New York, NY 10003, USA Tel: 212.365.1052 www.navacompanies.com F.18

PT.

F.5

Mechanical Engineer:

F.6

8'-0"

F.6

PT.

4'-0"

F.18

1'-0"

SLIDE

D'Antonio Consulting Engineers, P.C. 30 West Waukena Avenue Oceanside, NY 11572, USA 576.594.4284

F.6

08 F.6

A-028.00

F.6

12 A-028.00

F.6

F.13

Robert Silman Associates 32 Old Slip, 10th Floor New York, NY 10005, USA 212.420.7970

2'-8"

F.13

Structural Engineer:

Key Plan: 112"

EQ.

5'-113 4"

112"

EQ.

112"

4'-03 4"

EQ.

112"

4'-03 4" 14 A-028.00

MASTER BATH ELEVATION Scale: 1/2" = 1'0"

MASTER BATHROOM ELEVATION Scale: 1/2" = 1'0" 09

10 A-028.00

Legend:

12 26 4"

112"

118" 1"

12 15

EQ.

26 4"

Notification:

F.5

A-028.00

F.5 EQ.

F.13

112"

1'-214"

Date

ISSUE

612"

63 4"

Issue Description 3

F.13

3'-10"

EQ.

8'-0"

F.5

F.6

1" 5"

3'-47 8" AFF

F.13

EQ.

F.6

EQ.

9 3'-0"

MASTER BATH ELEVATION 5 Scale: 1/2" = 1'0"

VANITY DETAIL Scale: 1 1/2" = 1'0"

SECTION DETAIL Scale: 3" = 1'0"

F.3

MASTER BATH ELEVATION 7 Scale: 1/2" = 1'0" 24

412" F.6

F.6 4"

3 1 SLOPE 8" PER 1'0"

F.14

1'-93 8"

2'-0"

6" 1 8"

3'-63 8"

2'-0"

4" 2" 8"

9'-65 8"

114"

612"

112"

13 A-028.00

1'-014"

A-028.00

F.13

F.6

Project Title:

RINKER RESIDENCE

95 8"

F.13

SECTION DETAIL 12 Scale: 3" = 1'0"

2'-87 8"

5'-83 8"

Date

Revision 1'-03 4"

SECTION DETAIL 13 Scale: 3" = 1'0"

PLAN DETAIL 14 Scale: 3" = 1'0"

344 E 84TH STREET NEW YORK, NY 10028 Floor Number:

A-028.00

912"

F.13

04 5"

A-028.00 FLOOR FINISH F.8

4'-6"

FLOOR FINISH F.8

MASTER BATHROOM PLAN Scale: 1/2" = 1'0"

3'-0" CLEAR

VANITY DETAIL Scale: 1 1/2" = 1'0"

NOTES LEGEND:

13.

ADJ. HANGING ROD

14.

ADJ. SHELVES

NEW WINDOW

15.

5/8" TYP X GYP BOARD

16.

SLIDING DOOR TRACK

PLYWOOD

17.

SHOP LACQUER PAINT FINISH - COLOR TBD

PLYWOOD

18.

FINISH ACCESS PANEL WITH 4 BALL CATCHES

BLOCKING AS REQUIRED

19.

SHADE POCKET WITH MOTORIZED SHADE

MITER EDGE

20.

RECESSED TELEVISION BRACKET BOX

CORNER BEAD

21.

CABLE GROMMET

FRY REGLET 14" REVEAL

22.

LED STRIP LIGHT. iO Line .75 Symmetric

23.

PROVIDE BLOCKING AT 3'0" FOR FUTURE GRAB

10.

LED STRIP LIGHT. iO Line 1.5 (SUITABLE FOR

WET LOCATIONS) 11.

12.

GLASS SHELVES - STARPHIRE GLASS

TEMPERED GLASS DOOR/PANEL - STARPHIRE

BAR INSTALLATION 24.

PLUMBING FIXTURE, SEE PLUMBING SCHEDULE SHEET A-008.00

LED DOWNLIGHT: SEE RCP SHEET A-006.00 FOR SPECIFICATION

25.

CLEAR SILVERED MIRROR

1" HARDWOOD NOSING

26.

METAL SURROUND - FINISH F.16

06. ALL CABINET DOORS WITH LIFT-UP DOOR MOTION TO BE INSTALLED WITH AVENTOS HK-S STAY LIFT SYSTEM BY BLUM. 07. SHOP DRAWINGS TO BE SUBMITTED FOR ALL CASEWORK ITEMS INCLUDING BUT NOT LIMITED TO RADIATOR ENCLOSURES, ACCESS PANELS, CABINETRY, VANITIES, DOORS, JAMBS, HEADERS, SILLS, MEDICINE CABINETS, AND MISC. FABRICATION TO COMMENCE ONLY UPON APPROVAL OF SHOP DRAWINGS BY ARCHITECT. 08. CONTRACTOR TO PROVIDE FINISH SAMPLES FOR ALL WOOD, METAL, GLASS (MIRRORED, EDGE FINISH, ACID/SANDBLASTED). FABRICATION TO COMMENCE ONLY UPON REVIEW AND APPROVAL BY ARCHITECT. 09. ALL BOTTOM CABINETS TO HAVE (2) ROLL OUT SHELVES UNLESS OTHERWISE NOTED 10. ALL NON-CUSTOM DECORATIVE HARDWARE TO BE INSTALLED ONLY, DECORATIVE HARDWARE TO BE FURNISHED BY OWNER. 11. STONE COUNTERTOP FURNISHED AND INSTALLED BY CONTRACTOR. CONTRACTOR TO PROVIDE NECESSARY TEMPLATES FOR BATHROOM VANITIES. 12. SOLID WOOD EDGING, ALL EXPOSED EDGES

MASTER BATHROOM Seal & Signature:

Date: 5/26/2016 Project Number: Drawing: Checked: Drawing Number:

A-028.00

0440

Architect:

Structural Engineer:

05 A-028

Robert Silman Associates 32 Old Slip, 10th Floor New York, NY 10005, USA 212.420.7970

Key Plan:

BALCONY ELEVATION Scale: 1/2" = 1'0"

Legend:

Notification:

6'-4"

Issue Description

3'-0"

GFI

A-028

5/8" TYP X GYP BOARD

BLOCKING AS REQUIRED

MITER EDGE

CORNER BEAD

FRY REGLET 14" REVEAL

LED STRIP LIGHT. iO Line .75 Symmetric

10.

LED STRIP LIGHT. iO Line 1.5 (SUITABLE FOR WET LOCATIONS)

11.

LED DOWNLIGHT: SEE RCP SHEET A-006.00 FOR SPECIFICATION

12.

1" HARDWOOD NOSING

13.

ADJ. HANGING ROD

PLYWOOD

ADJ. SHELVES

15.

16.

SLIDING DOOR TRACK

17.

SHOP LACQUER PAINT FINISH - COLOR TBD

18.

FINISH ACCESS PANEL WITH 4 BALL CATCHES

19.

SHADE POCKET WITH MOTORIZED SHADE

20.

RECESSED TELEVISION BRACKET BOX

21.

CABLE GROMMET

22.

23.

PROVIDE BLOCKING AT 3'0" FOR FUTURE GRAB BAR INSTALLATION

24.

PLUMBING FIXTURE, SEE PLUMBING SCHEDULE SHEET A-008.00

25.

CLEAR SILVERED MIRROR

26.

METAL SURROUND - SEE FINISH SCHEDULE

15'-03 4"

PLYWOOD

14.

Date

Revision

Project Title:

RINKER RESIDENCE

3'-3"

21'-33

NEW WINDOW

Date

ISSUE

NOTES LEGEND: 1.

344 E 84TH STREET NEW YORK, NY 10028 Floor Number:

GLASS SHELVES - STARPHIRE GLASS

6'-5"

BALCONY Seal & Signature:

Date: 5/26/2016 Project Number:

TEMPERED GLASS DOOR/PANEL - STARPHIRE

Drawing:

BALCONY PLAN Scale: 1/2" = 1'0"

Checked: Drawing Number:

A-029.00 5

BALCONY DETAIL Scale: 1" = 1'0"

0440

Architect:

ROOF TERRACE

Structural Engineer: Robert Silman Associates 32 Old Slip, 10th Floor New York, NY 10005, USA 212.420.7970

OPEN TO BELOW

Key Plan:

ROOF PLAN Scale: 1/4" = 1'0" Legend:

Issue Description

Date

ISSUE

Date

Revision

ROOF ELEVATION Scale: 1/2" = 1'0"

Project Title:

RINKER RESIDENCE 344 E 84TH STREET NEW YORK, NY 10028 Floor Number:

ROOF Seal & Signature:

Date: 5/26/2016 Project Number: Drawing: Checked: Drawing Number:

A-030.00

ROOF ELEVATION Scale: 1/2" = 1'0"

0440