Portfolio

JulienDm Architecture[s] Juliendm.archi@gmail.com +1 (213) 479-3636

Jaguar & LandRover Dealership, Elmsford, NY Architect: Multatech Area: 47,447 SF Cost: $ n/a Addition & Renovation of an existing retail store into a full service automobile dealership. The challenge was to work within an existing building and deal with structural issues.

I assisted the project leader putting together a full construction set coordinating with structural engineer, civil engineer and MEP, as well as equipment, furniture or signage vendors. I got involved from the very early design phase of the project, to construction and site visit, always making sure to respond to the client expectations with the highest standard.

Credit : Julien DM

1/ Preliminary rendering - Sketchup & Photoshop

2/ Front Elevation Julien Debar-Monclair / Juliendm.archi@gmail.com / +1 (213) 479 3636

3/ Section Details - New ACM system

4/ Plan Details - New ACM system

5/ Wall Section : Existing Structure & New ACM system

Julien Debar-Monclair / Juliendm.archi@gmail.com / +1 (213) 479 3636

Faceted Wall & ceiling panels, New York City.

Architect: Studio NYC Area: 3500 SF Cost: $ 324,390.00 Developed a 3/16� aluminium faceted wall & ceiling system for the Sony offices in New York City, through an elaborated detail and manufacturing process.

Strong collaboration with the structural engineer for the development of the wall standoffs and ceiling hangers, as well as the panels & stiffeners.

I have been included in every steps of the project, from the shop drawings coordination, to finishing and shipping, to assist the project manager.

Credit : Studio NYC

1/ Primary design : rendering from the architect

2/ Arktura Reflected Ceiling Plan

Julien Debar-Monclair / Juliendm.archi@gmail.com / +1 (213) 479 3636

3/ Arktura wall and ceiling exploded axonometric

SUBMITTED BY:

3 8-16"

ALL-THREAD FROM BRACKETS TO SUBSTRATE, CONNECTION TO BASE BLDG PROVIDED, ENGINEERED, AND INSTALLED [BY OTHERS] ADJUSTABLE HANGER, 12GA STEEL, POWDER- COATED, COLOR MATTE BLACK, TYP. [BY ARKTURA]

VARIES

10 - 24 RIVET NUT ATTACH TO STANDOFF, TYP. [BY ARKTURA]

D,

10 - 24 SCREW AT CONNECTION OF LIGHT FIXTURE CLIP TO STANDOFF, TYP. [BY ARKTURA]

ARCHITECT:

LIGHT FIXTURE CLIP, TYP. [BY OTHERS] LIGHT FIXTURE, TYP. [BY OTHERS]

M)

S,

ALUM. CEILING PANEL, POWDER COATED, COLOR ARKTURA WHITE, TYP. [BY ARKTURA]

238"

121"

R TO A] PANELS UNK

3 16"

ANDOFF,

SUBMITTED TO: 1079 East Grand Street Elizabeth, NJ 07207 USA

2 41 " X 121" C-CHANNEL (81" ALUMINIUM) ATTACHED TO PANELS, POWDER COATED, COLOR TO MATCH PANELS, TYP. [ BY ARKTURA]

1" TYP.

EEL, E BLACK,

588 Broadway, Suite 702 New York, NY 10012 US

COATED, RA]

LIGHT FIXTURE @ PANEL SEAM DETAIL

4/ Typical panel seam detail @ light fixture location

SCALE: 3" = 1'-0"

3

DIFFUSER , TYP. [BY OTHERS]

VARIES

2 41 " X 121" C-CHANNEL (81" ALUMINIUM) ATTACHED TO PANELS, POWDER COATED, COLOR TO MATCH PANELS, TYP. [ BY ARKTURA]

R

121"

2163 "

ED

[14-A137]

EEL, E

11 MADISON - SONY

ADJUSTABLE HANGER, 12GA STEEL, POWDER- COATED, COLOR MATTE BLACK, TYP. [BY ARKTURA]

S,

, 121"

2"

121"

3"

1" 3 16"

ALUM. CEILING PANEL, POWDER COATED, COLOR ARKTURA WHITE, TYP. [BY ARKTURA]

D,

PANEL SEAM & DIFFUSER DETAIL SCALE: 6" = 1'-0"

EL, E

GA

A]

D,

REVISIONS: DELTA: DATE:

TYP.

1 2 3

RECORD SET

9/04/2015

RECORD SET

11/12/2015 RECORD SET

ALL-THREAD FROM HANGERS TO SUBSTRATE, CONNECTION TO BASE BLDG PROVIDED, ENGINEERED, AND INSTALLED [BY OTHERS]

8'-0" A.F.F

5/ Wall Elevation

REVISION TITLE:

8/12/2015

3 8 -16"

1 4"

121"

S

ED,

2

SHOP DRAWINGS

M)

FACETED CEILING AND WALL

3 8 -16" ALL-THREAD FROM HANGERS TO SUBSTRATE, CONNECTION TO BASE BLDG PROVIDED, ENGINEERED, AND INSTALLED [BY OTHERS]

D,

121" CL

ADJUSTABLE HANGER, 12GA STEEL, POWDER- COATED, COLOR MATTE BLACK, TYP. [BY ARKTURA]

6/ Post installation photographies

3 16"

ALUM. CEILING PANEL, POWDER COATED, COLOR ARKTURA WHITE, TYP. [BY ARKTURA]

STAMPS:

DIFFUSER , TYP. [BY OTHERS]

Julien Debar-Monclair / Juliendm.archi@gmail.com / +1 (213) 479 3636 NON-ADUSTING BRACKET 131, 12 GA STEEL, POWDER COATED, COLOR TO MATCH PANELS, TYP. [BY ARKTURA] BRACKET TO BASE BLDG. FASTENER TO BE SPECIFIED BY PROJECT ENGINEER PRIOR TO MANUFACTURING PHASE, TYP.

SHEET TITLE:

Wall & Ceiling Perforated Panels, Los Angeles.

Architect: Gensler LA Area: 950 SF Cost: $ 132,875.00 Developed a 1/2� aluminium perforated wall & ceiling system for Guthy-Renker’s offices in Los Angeles, through an elaborated detail and manufacturing process.

Strong collaboration with in-house engineering for the development of ceiling hangers with bracing cables.

I have been included in every steps of the project, from the molecular pattern development & shop drawings coordination, to finishing and shipping, to assist the project manager.

1/ Panels @ Column condition : Seaming

2/ Arktura Reflected Ceiling Plan Julien Debar-Monclair / Juliendm.archi@gmail.com / +1 (213) 479 3636

4/ Perspective - 4 Ceiling & Wall panels

5/ Panels after paint finish : Quality Control 3/ Typical Ceiling Double-Bracket

6/ Panels installed : column condition Julien Debar-Monclair / Juliendm.archi@gmail.com / +1 (213) 479 3636

Perforated Wall Panels, Las Vegas.

Architect: Gensler LV Area: 880 SF Cost: $ 60,000.00 Developed a 1/4� aluminium perforated wall panel system for the SLS hotel in Las Vegas, through an elaborated detail and manufacturing process.

Strong collaboration with engineering team and architect for the development of the standoffs and panels.

I have been included in every steps of the project, from the pattern development & shop drawings coordination, to finishing and shipping, to assist the project manager.

For the stage, the architect wanted the pattern to follow a gradient, from bottom to top, opaque to very open. We coordinated the standoffs to follow the pre-engineered tube steel structure, making sure they were not visible through the pattern.

Credit : SLS hotel, Las Vegas

1/ Typical standoff type

2/ Arktura floor Plan Julien Debar-Monclair / Juliendm.archi@gmail.com / +1 (213) 479 3636

3/ Typical panel elevation & section

4/ Typical panel assembly sequence

5/ Factory quality control

6/ On-site panel assembly Julien Debar-Monclair / Juliendm.archi@gmail.com / +1 (213) 479 3636

Perforated Wall Panels, San Francisco.

Architect: Snøhetta Area: 880 SF Cost: $ 80,000.00 Developed a 3/16� aluminium perforated wall panel system for the MoMa in San Francisco, through an elaborated detail and manufacturing process.

Strong collaboration with engineering team and architect for the development of the standoffs and panels.

I have been included in every steps of the project, from the pattern development & shop drawings coordination, to finishing and shipping, to assist the client and the project manager.

The panels had to remind and match the post modernism building by Mario Botta, built in 1995.

1/ Elevation - Panel dimensions

2/ Elevation - Standoff locations

Julien Debar-Monclair / Juliendm.archi@gmail.com / +1 (213) 479 3636

3/ Perspective view

4/ Exploded axon. - Panel assembly

5/ Standoffs and panels installation

Julien Debar-Monclair / Juliendm.archi@gmail.com / +1 (213) 479 3636

Cruise Terminal & Marina, Istanbul.

Architect: Julien Debar-Monclair Area: n/a Cost: n/a For the Master’s degree, the students had to develop a urbano-architectural project in Istanbul, Turkey. After a large range of analysis, I decided to work on outlining the strong relation to the Bosphorus. The idea was to create a green promenade through abandoned docks, with some areas to rest, close to the water, dug gardens, marina, fishing zones, restaurants and public spaces.

The cruise terminal has been thought as a public space generator, as well as a symbol for Istanbul.

1/ Cruise Terminal Openess concept

2/ Front Elevation Julien Debar-Monclair / Juliendm.archi@gmail.com / +1 (213) 479 3636

3/ Section through the marina and the “floating rocks�

4/ View from the marina

Julien Debar-Monclair / Juliendm.archi@gmail.com / +1 (213) 479 3636

House extension, Paris.

Architect: B&co Area: 2000 SF Cost: $ 120,000.00 Extending an existing 1930’s house in Paris. The goal was to create a modern extension in harmony with the existing construction.

We kept and cleaned the bricks in facade, and created an opening through the roof to access a new terrasse.

view1

1/ Ground floor plan

view2

view3

2/ Section AA Julien Debar-Monclair / Juliendm.archi@gmail.com / +1 (213) 479 3636

3/ View from the new space toward the existing interior

4/ Opening in the roof to access a terrasse

6/ Relation between the traditional and the extended space Julien Debar-Monclair / Juliendm.archi@gmail.com / +1 (213) 479 3636

Undulating Ceiling, San Francisco.

Architect: Form4 Area: 813 SF Cost: $ 50,000.00 Developed a 20 Ga Steel undulating ceiling “Atmosphera” for the Netflix offices in San Francisco, through an elabodetail and manufacturing process.

I have been included in every steps of the project, from the layout/undulation development & shop drawings coordination, to finishing and shipping, to assist the project manager.

I worked on a large range of different “standard products”, adjusting the systems to the designers requirements, material limitations, and base building elements.

1/ System overall dimensions Credit : Arktura, Llc

Credit : Arktura, Llc

2/ Drop locations

Credit : Arktura, Llc

3/ Perspective - Fins layout Julien Debar-Monclair / Juliendm.archi@gmail.com / +1 (213) 479 3636

Sketching, everywhere.

Sketches: Julien Debar-Monclair Area: I leave it to my imagination Cost: Free

“I prefer drawing to talking. Drawing is faster, and leaves less room for lies.� -Le Corbusier

1/ Sample of sketches : Pencil & watercolor Julien Debar-Monclair / Juliendm.archi@gmail.com / +1 (213) 479 3636