ARTISTS’ RESIDENCE The trusses The residences’ structure is made up of Howe trusses, in the accesses parts is Vierendeel type, to allow the passage. These trusses are attached to the wall and on the pillars.
1. Micro perforated 5mm aluminium sheets 2. Bolts 3. Omega channel 4. Welded square sections 5. 2UPN 320 Welded sections 6. Tubular section 60X80mm 7. Horizontal rails
Components
The middle secundary beam is alveolar since it would allow the installations to pass through it.
The structural system consists of 2UPN beams in a tubular girder, and IPE sections in the transverse beams.
1. Tubular 400x400 2. Vertical rail 10X10
3. Column 10X15 4. IPE 360
5. IPE 360 ALVEOLAR 6. 2.5m wall thickness
7. Microperforated aluminium sheets 8. 2 UPN 320 9. Decking plate
TECNICAL ASPECTS
Constructive details
1.5% 0%
1. Metal plate nail 2. Metal flashing cap 3. L channel mounted to beam 4. Rainscreen membrane 5. Vapour control layer 6. Insulation layer 7. Sloped lightweight concrete 8. Roof drain sump 9. Drip edge 10. Fiberglass coating 11. Suspended ceiling boards 12. Channel support brackets 13. Rod hanger 14. Rain drainage pipe 15. Wall angle 16. IPE 360 beams 17. Insulating polyurethane panel 18. L 60 facade plates holder 19. Header preframe 20. Folding window rail 21. 2UPN 320 Steel columns 22. Window frame
23. Pivot windows mechanism 24. Sill preframe 25. Rain gutter 26. Polyurethane foam 27. Edge strip board 28. Tongue and groove planks 29. Cement mortar 30.Embedded tubing 31. Radiant floor track 32. Polyethylane vapor barrier 33. Ridged thermal insulation 34. Concrete slab 35. Anchor bolts 36. Decking plate 37. Cross-linked hanger system 38. Suspension U angle 39. Expansion bolt 40. L 160 edge structure angle 41. Railling 42. T section, handrail holder 43. 2UPN 320 Truss 44. 2UPN Main estructure