Jurga: Siso sąvaržų, sujungimų, įvorių katalogas

Knock-Down

FITTINGS

The technical descriptions and dimensions in this catalogue, also those with the photographs and drawings, are not binding.

We reserve the right to make design improvements.

We bear no liability for any misprints or other errors that might occur in the production of the catalogue.

SISO A/S tager forbehold for trykfejl samt ændringer i produktets specifkationer.

Für Druckfehler und Irrtümer ist jede Haftung ausgeschlossen.

Produktänderungen behalten wir uns vor.

- high quality furniture fittings

SISO A/S MILEPARKEN 11 DK - 2740 SKOVLUNDE (COPENHAGEN) DENMARK PHONE: (+45) 45 830 900 FAX: (+45) 45 830 444

DISTRIBUTOR

CONTENTS

- high quality furniture fittings

KNOCK DOWN "SYSTEM S" - Ø15 mm.........................................3-7 MINIFIX - Ø15 mm.........................................................................8 MEDIAL FIX - Ø25 mm.....................................................................9 MEDIA LUNA & KNOCK DOWN FITTING 512 - Ø30 mm .........10-11 MINI LUNA CONNECTOR - Ø30 mm..............................................12 METAL WASHERS - Ø25, 30 & 35 mm...........................................13 FUERTE - Ø35 mm.....................................................................14-16 JUMBO FIX - Ø35 mm......................................................................17 ”MAMUT” ZAMAK KD-SYSTEM – Ø 35 MM - DOUBLE SPIRALED......18 MAXI LUNA - Ø40 mm.......................................................................19 SNAPFIX & WORKTOP CONNECTOR............................................20 WORKTOP CONNECTOR "FIX-A-LOT".....................................21-22 METAL CONNECTING SCREWS F/Ø5 & Ø8 mm BORE.................23-24 CORNER BLOCKS & CORNERFIX...........................................25-27 MITRE DOWELS & EXPANSION DOWELS....................................28 SNAP FITTINGS "214",“DIVA” & "BONE"...................................29-31 CLIP CONNECTOR “DOVETAIL”.....................................................32 TWIST & TIGHT - CHAIR ASSEBLY................................................33 CLIP PANEL CONNECTORS & SUSPENDED HANGER FITTINGS.........................................34-35 CABINET HANGER “CLIFF”............................................................36

1

- high quality furniture fittings

CONTENTS

PANEL CLICK BUTTON CONNECTOR..........................................37 REAR PANEL CONNECTORS........................................................38 STABILIZER, KEYHOLE FIXTURES & BED FITTINGS.............39-41 ROW & JOINT CONNECTORS.......................................................42 BEECH WOOD DOWELS & BISCUITS...........................................43 KEA SCREW-IN BUSHINGS......................................................44-47 LEG CORNER BRACKETS, HANGERBOLTS, WASHERS & NUTS....................................................................48-51 LOCATING PINS .............................................................................52 FIFTEEN -, MUSHROOM-, INSEX SCREWS & BOLTS.............53-54 INSEX COLLARS & HEX KEYS.......................................................55 CROSS DOWELS............................................................................56 CONFIRMAT SCREWS....................................................................57 WOOD SCREWS & DOUBLE POINTED STEEL NAILS.................58 BRASS & STEEL COMBIFIX HEADS.........................................59-63 BUSHINGS..................................................................................64-68 KD SYSTEM "INVISIO"................................................................69-74 COMPRESSION DOWELS & QUICK DOWEL CABINET CONNECTOR........................................75

2

KNOCK DOWN "SYSTEM S"

- high quality furniture fittings

KNOCK DOWN "SYSTEM S" Is an improvement of the conventional eccentric cam fittings!

Instead of an eccentric cam house in zamak we have developed a steel barrel with a pointed grub screw, which is being wedged below the neck of the dowel ensuring a permanent grip.

Replaces all 15 mm diameter eccentric cam fittings without change of drilling, as the barrel requires the normal 34 mm bore distance from the edge. Can also be supplied for 24 mm and 44 mm distance.

All parts are made of high quality steel or stainless steel for out door use. The material warrants unsurpassed anchoring properties and eliminates the risk of breakage of the fitting.

3

- high quality furniture fittings

KNOCK DOWN "SYSTEM S"

"SYSTEM S" 1512 – F/16 MM PANELS Material Steel or Stainless Steel Size Cylinder Ø15 x 12,5 mm Grub screw M10 x 6 mm Finish Bronze Plated (BRZ), Bright Zinc Plated (BZP), Stainless Steel (SS) Natural

Slot

Hex

7,5

12,5

5

BRZ BZP SS Natural Cylinder #11.03.500 #11.03.505 #11.03.705 Grub screw w/slot #11.03.490 #11.03.494 on request Grub screw w/hex #11.03.491 #11.03.496 #11.03.715

"SYSTEM S" 1514 – F/19 MM PANELS Material Steel or Stainless Steel Size Cylinder Ø15 x 14 mm Grub screw M10 x 7,5 mm Finish Bronze Plated (BRZ), Bright Zinc Plated (BZP), Stainless Steel (SS) Natural

Slot

Hex

9

14

5

BRZ BZP SS Natural Cylinder #11.03.516 #11.03.582 #11.03.700 Grub screw w/slot #11.03.521 #11.03.592 on request Grub screw w/hex #11.03.520 #11.03.593 #11.03.710

"SYSTEM S" 1522 – F/25-28 MM PANELS Material Steel

Slot

Size Cylinder Ø15 x 21,5 mm Grub screw M10 x 15 mm Finish Bronze Plated (BRZ) Cylinder #11.03.518 Grub screw #11.03.495

16,5

21,5

5

"SYSTEM S" 1518 - HEAVY DUTY - F/22-25 MM PANELS - M8 DOWELS Material Steel

Slot

Size Cylinder Ø15 x 18 mm Grub screw M10 x 8,5 mm Finish Bronze Plated (BRZ) Cylinder #11.03.450 Grub screw #11.03.460

4

18

13 5

STEEL DOWELS F/KD-SYSTEM S

- high quality furniture fittings

Ø7

Dowel #11.03.524

M6 24

6

Ø7

Ø6,9

Dowel #11.03.523 Cap #11.03.532

Ø12

11

M4 11

24

6

Dowel #11.03.531 Cap #11.03.532

M4 11

Ø4,5

1,8

Ø7 M4 11

1,5

34

6

Ø7

5 mm Bore

Dowel #11.03.530

11

34

6

Ø7 M6

Dowel #11.03.525

8,5

12,5 54

6

50

34

6

Ø7

Double dowel for 19 mm panel Dowel #11.03.537

Hinged double dowel Dowel #11.03.570

6

Ø7

Double dowel for 16 mm panel Dowel #11.03.539

Double dowel no ring for 20 mm panel Dowel #11.03.536

6

Ø7

End dowel Dowel #11.03.534

Double dowel for 20 mm panel Dowel #11.03.535

34

6

52

34

6

Ø7 6

54

34

6

Ø7 6

54

34

6

Ø7 6

46,5

46,5

6

Ø9

Heavy duty dowel for housing S1518 Dowel #11.03.470

M8

Mitre dowel Dowel #11.03.575

M6

13

60

6

Ø7 9

46

6

5

- high quality furniture fittings

PLASTIC COVER CAPS

PLASTIC COVER CAPS Material Nylon Size Ø17 mm Brown Beige White Oak Black Light grey RAL 7035

# 11.03.551 # 11.03.553 # 11.03.554 # 11.03.555 # 11.03.556 # 11.03.559

STEEL DOWEL, M6 & SCREW IN BUSHING

34

STEEL END DOWEL, M6 & SCREW IN BUSHING

M6 HINGED DOWEL F/MITRE JOINTS #11.03.575

13,5

Ø2

Ø7

M6 9

6

46,5

6

DOUBLE STEEL DOWEL F/16 , 19, 20 MM CENTRE PANEL - high quality furniture fittings

34

34

DOUBLE STEEL DOWEL HINGED # 11.03.570 F/MITRE JOINTS AT ANY ANGLE FROM 90째 TO 180째

90째-180째

ADJUSTABLE END DOWEL # 11.03.531 & CAP # 11.03.532

34

7

MINIFIX - Ø15 MM

- high quality furniture fittings

8

Material Zamak, Raw Item No.

12,5

# 11.03.260

Ø15

Ø15

CAM F/18 MM PANEL Material Zamak, Raw Item No.

Ø15

Ø15

CAM F/16 MM PANEL

9

13,8

# 11.03.270

COVERS F/MINIFIX - Ø15 MM NYLON COVER CAP F/MINIFIX Material Nylon Black Dark brown White Light oak 148 Beige 147 Light grey

Ø17 4

#11.03.244 #11.03.245 #11.03.246 #11.03.247 #11.03.248 #11.03.249

4,2

STEEL DOWEL - EURO THREAD Ø5 MM BORING F/MINIFIX - Ø15 MM Ø6

Ø7

Ø6,5

11

30 Material Steel, Bright Zinc Plated Item No.

# 11.03.333

Ø5

Ø7 34 12

STEEL DOWEL M6 F/MINIFIX - Ø15 MM M6

Ø7

Ø6,8

8

30 Material Steel, Bright Zinc Plated Item No.

# 11.03.342

M6

Ø7 34 12

8

MEDIAL FIX - Ø25 MM Ø25

ZAMAK HOUSING Item No.

- high quality furniture fittings

7

# 11.03.365

12

5

DOWEL STEEL BZP Item No.

Ø7

# 11.03.380

9

34

Ø8 Ø25

Ø7

DOUBLE DOWEL STEEL BZP Item No.

88

34

# 11.03.385

34

Ø8 Ø25

Ø25

40

40 Ø7 ANGLED DOWEL STEEL BZP Item No.

# 11.03.390

40 Ø25

PLASTIC COVER CAP Brown - Side grip Item No.

Ø25

40

3,5

# 11.03.376

ZAMAK COVER CAP Material Zamak, nickel plated Item No.

Ø28

# 11.03.375

9

- high quality furniture fittings

MEDIA LUNA - Ø30 MM

CROSS DOWEL

CROWN SCREW 515 NYLON WASHER

7

WASHER BROWN Material Plastic Item No.

17 # 11.04.239

25

CROWN SCREW POINTED Material Steel, zinc plated Item No. M6 x 50 mm M6 x 65 mm M6 x 80 mm

# 11.04.028 # 11.04.030 # 11.04.035

50 / 65 / 80

40

7,5

50+0,5 - 0,5 Ø10

M6 30

CROSS DOWEL Material Steel, zinc plated

M6

All dimensions and Item No. see page 50 COVER CAP

9

Material Plastic Item No. Beige Brown White

10

Ø10 or Ø12

# 11.04.244 # 11.04.245 # 11.04.246

Ø30

KNOCK DOWN FITTING 512 - Ø30 MM

- high quality furniture fittings

CROWN SCREW POINTED BZP Item No. M6 x 30

30

7,5 Ø10

M6

# 11.04.020

30

PLASTIC HOUSE Item No. Brown White Grey Black

# 11.04.010 # 11.04.011 # 11.04.015 # 11.04.016

Ø30

24 +0,5 - 0,5

31

20

11

MINI LUNA CONNECTOR - Ø30 MM

- high quality furniture fittings

MINI LUNA WASHER

22

Material Zamak, Raw Item No.

# 11.04.232

M6

8

FIFTEEN SCREW

Hex 4

Material Steel YZP

M6

Sizes M6 x 25 up to 120 mm with 5 mm interval

On request

2,5

Ø15

MUSHROOM SCREW Material Steel YZP Sizes M6 x 25 up to 100 mm with 5 mm interval COVER CAP Material Plastic Item No. Beige Brown White

Hex 4 M6 On request

Ø15

9 Ø30

# 11.04.244 # 11.04.245 # 11.04.246

43 Z-SHAPED ALLEN KEY 4 mm

20

Material Hardened BZP Item No.

# 12.06.035

4

4

L-SHAPED ALLEN KEY 4 mm Material Hardened black Item No.

12

23 # 12.06.010

65

METAL WASHERS

- high quality furniture fittings

METAL WASHER F/M6 screw, Ø30 mm bore

30

Material Steel, BZP Item No.

Ø6,5

# 11.04.243

COVER CAP

9

Material Plastic Item No. Beige, Ø30 mm bore Brown, Ø30 mm bore White, Ø30 mm bore Brown, Ø35 mm bore

Ø30

# 11.04.244 # 11.04.245 # 11.04.246 # 11.04.640

M8 Ø25

METAL WASHER W/internal thread M8, Ø25 mm bore Material Steel, BZP Item No.

6 13

# 11.04.210

M10 Ø25

METAL WASHER W/internal thread M10, Ø25 mm bore Material Steel, BZP Item No.

8

16

# 11.04.215

Threaded bolt to be bought separately

METAL WASHER W/premounted hexagonal nut M8, Ø40 mm bore

16

Material Steel Item No.

M8

# 11.04.242

8

L - 75, 80, 90

Ø40 13

"FUERTE" KD-SYSTEM - Ø35 MM - 90°

- high quality furniture fittings

"FUERTE" is a heavy duty connector particularly suitable for strong and secure and assembly of beds, table frames, panels and cabinets. The housing with it is steel worm gear and hardened steel dowel ensures a permanent grip and continual tension.

The system is available for 90° and 180° connections with drilling distances 35, 45 and 55 mm.

35 / 45 / 55

HOUSING Material Housing: zamak, raw Worm gear: hardneded steel Size Ø35 x 17 mm Hex hole 6 mm Item No.

17

9 Ø35

# 11.03.610

DOWEL Overall lenght 64 mm Material Hardened steel

M8

Sizes M8 x 64 mm Drill distance 35 mm Item No.

12

Ø10,5 22

30

# 11.03.620

DOWEL Overall lenght 74 mm Material Hardened steel

M8

Sizes M8 x 74 mm Drill distance 35 mm Item No.

12

Ø10,5 32

30

# 11.03.621

DOWEL Overall lenght 84 mm Material Hardened steel

M8

Sizes M8 x 84 mm Drill distance 35 mm Item No.

14

12 # 11.03.625

Ø10,5 42

30

"FUERTE" KD-SYSTEM - Ø35 MM - 180°

- high quality furniture fittings

The 180° connection is ideal for partition walls, kitchen table tops etc.

By use of a "Female" dowel combined with a standard "Male" dowel or 2 female dowels connected with a threaded bolt of any length, a 180° connection is possible.

Wood dowel

Method 1 # 11.03.660

# 11.03.660

Wood dowel

Method 2 # 11.03.620

# 11.03.660

HOUSING Material Housing: zamak, raw Worm gear: hardneded steel Sizes Ø35 x 17 mm Hex hole 6 mm Item No.

17

9 Ø35

# 11.03.610

DOWEL Overall lenght 64 mm Material Hardened steel

M8

Sizes M8 x 64 mm Drill distance 35 mm Item No.

12

Ø10,5 22

30

# 11.03.620

DOWEL Material Steel, BZP Sizes Famele thread M8 Standard lenght 52 mm Item No.

Ø10,5

M8 20

30

# 11.03.660

THREADED BOLT No. 1262 Material Steel Sizes M8 x Any lenght

M8 Any lenght

15

"FUERTE" KD-SYSTEM - Ø35 MM - ACCESSORIES

- high quality furniture fittings

Ø40

COVER CAPS W/CENTRE PIN WHEN HOUSING IS FLUSH MOUNTED Material Nylon

Ø6,1

Size Ø40 mm Pin Ø6,1 mm Item No. Brown Beige Black White

# 11.03.641 # 11.03.642 # 11.03.643 # 11.03.644

COVER CAPS W/SIDE GRIP

Ø38

Material Nylon

2

Size Overall Ø38 mm Inner Ø35 mm Item No. Brown

Ø35

# 11.03.640

L-SHAPED 6 MM HEX KEY

6

Material Hardened steel, BZP

36

Size 36 x 86 mm Hex 6 mm Item No.

2

86 # 11.03.650

MOUNTING EXAMPLES BED

16

TABLE

JUMBO FIX - Ø35 MM

- high quality furniture fittings

9,5

16,5

HOUSING Ø35 MM

Ø35

Material Zamak, raw Item No.

55 # 11.03.400

M8

16,5 Ø35

COVER CAP

Ø39

Material Plastic Item No. Brown DOWEL M6 Material Steel, BZP Size M6 x 28,5 mm Drill 35 mm Item No. DOWEL M8 Material Steel, BZP Size M8 x 48,5 mm Drill 35 mm Item No.

# 11.03.440

Ø7

Ø9

M6

28,5

9,5

# 11.03.408

Ø9 48,5

M8 9,5

# 11.03.410

DOUBLE DOWEL Material Steel, BZP Item No.

Ø9

# 11.03.415

35

24

35

HINGED DOUBLE DOWEL Material Steel, BZP Item No.

# 11.03.420

88 Ø8 44

Ø8,3 44 17

”MAMUT” ZAMAK KD-SYSTEM – Ø 35 MM - DOUBLE SPIRALED

- high quality furniture fittings

HOUSING Ø35MM Double spiraled housing for extra strength Material Zamak, raw Item No.

35/55

Ø9 Ø35

# 11.03.430

9,4

16,3

(Not for sale or re-export to Spain, Portugal, France, UK, Germany, Italy & Turkey)

6,9 Ø35

STEEL DOWEL M8 Material Steel, bright zinc plated Item No. M8 x 39,5 mm (Drill 35mm)

# 11.03.443

M8 x 60 mm (Drill 55mm)

# 11.03.445

Drill size 35/55 M8

Ø8 39,5/60

37

Ø9

DOUBLE DOWEL Material Steel, bright zinc plated Item No. 74 mm (Drill 88-96mm)

37

74

# 11.03.448

PLASTIC COVER CAP

Ø39

Material Plastic, Brown Item No. Ø39 mm, 7 mm Pin # 11.03.440

18

Ø7

MAXI LUNA - Ø40 MM

9

MAXI LUNA WASHER Bore Ø40 mm Hole Ø8 mm

32

Material Zamak, Raw Item No.

- high quality furniture fittings

# 11.04.230

Ø8

15

THREADED BOLT Coned Rnds Material Steel, YZP

M8

Sizes M8 x 95 mm Item No.

95 # 12.08.647

SCREW IN BUSHING BL-SK with closed end

Hex 8 mm

Material Steel, YZP

M8

Ø15

Sizes Ø15 x M8x 30 mm Item No.

30 # 12.10.176

HEXAGONAL NUT DIN 934

13

Material Steel, BZP Item No.

M8 # 12.12.016

SPANNER Open - Flat - M8/13 mm

86

Material Steel, BZP Item No. Mild steel Hardened steel

12

13

# 12.06.150 # 12.06.155

COVER CAP Bore Ø40 mm

11

Material Plastic Item No. Brown White Beige

Ø40 # 11.04.247 # 11.04.250 # 11.04.248

19

SNAPFIX - "S" & WORKTOP CONNECTOR

- high quality furniture fittings

SNAPFIX "S" SNAPFIX "S" Item No. White Black Beige Brown

# 11.04.529 # 11.04.530 # 11.04.531 # 11.04.533

Special euro screws 6,3 x 11,5 mm BZP w/large head Ø8/Ø10mm # 11.04.618

Ø20 Ø20

16 13

Ø8

8 Ø8 11,5

WORKTOP CONNECTOR

WORKTOP CONNECTOR Material Steel, bright zinc plated Size M6 x 65 mm M6 x 100 mm M6 x 150 mm M6 x 200 mm

# 11.04.425 # 11.04.427 # 11.04.430 # 11.04.460

20 15 16 Ø10

M6 BL

20

Ø40

Ø35

WORKTOP CONNECTOR ”FIX-A-LOT” - high quality furniture fittings

The Fix-A-Lot connector is a new practical and innovative solution that saves time and money in assembling work / counter tops and panels. The Fix-A-Lot is a particularly slim type connector, which is perfect for material as thin as 10 mm.

9 mm. min.

7,5 mm. min.

Features: • F/min. 10 mm plates.

• May be inserted into the worktops before placing them in position on the kitchen cabinets.

• The length on the female part may be cut to size in case of wrong milling.

• Two installation ways depending on construction of the kitchen. ”Push” if enough space or ”Drop” if plates are installed up against a wall or high kitchen cabinet.

• Stays in the milling holes when inserted.

• Easy tightening by use of PH3 screw driver.60.280 (Batteries, keys, cards & strikers to be bought separately)

ED

NT PATE

35 mm.

10

Material: POM – Grey Size: ø35 x 127 x 9 mm 1 Set = 1 Male + 1 Female Part Item No.: # 11.04.470

124 - 127 mm.

9 mm.

100 mm.

10 mm.

35 mm.

7,50 mm.

50 - 90 mm.

75 mm. recommended

Ø35 mm.

21

WORKTOP CONNECTOR ”FIX-A-LOT” - high quality furniture fittings

”PUSH”

22

”DROP”

1.

1.

2.

2.

3.

3.

INDIVIDUAL COMPONENTS F/Ø5 BORE

- high quality furniture fittings

M4

M4

Ø10 L

L

Ø5 X

Screw "L"

Tube "L"

20 - 30 mm

Panel thickness (X)

M4 x 14 mm

M4 x 20 mm

# 11.06.730

available upon request

25 - 35 mm

M4 x 14 mm

M4 x 25 mm

# 11.06.735

available upon request

27 - 37 mm

M4 x 14 mm

M4 x 27 mm

# 11.06.740

available upon request

30 - 40 mm

M4 x 17 mm

M4 x 27/30 mm

# 11.06.750

TUBE M4 X Ø5 SIZES L = 15, 20, 22, 25, 27, 30, 35, 40 mm L = 20 mm BPL # 11.06.709 L = 27 mm BRZ # 11.06.713 L = 30 mm BLK # 11.06.711

SCREW M4 SIZES L = 10, 14, 18, 22, 25, 30, 35 mm Upon request

THREADED TUBE M4 X Ø5 MM Diam. x L = 15, 22, 25, 30, 45, 50 mm Material Steel, yellow zinc plated L = 15 mm # 11.06.695 L = 22 mm # 11.06.700 L = 30 mm # 11.06.701

NPL

BPL

# 11.06.751

BRZ

# 11.06.752

BLK

# 11.06.753

Ø9,7

Ø5 L

M4

Ø9,7 L

M4 L

23

INDIVIDUAL COMPONENTS F/Ø8 BORE

- high quality furniture fittings

M6

Ø14

M6

Ø8

L

L

3

Ø8 X

Panel thickness (X)

Screw "L"

Tube "L"

NPL

BPL

BRZ

25 - 33 mm

M6 x 14 mm

M6 x 25 mm

31 - 39 mm

M6 x 14 mm

M6 x 30 mm

# 11.06.902

# 11.06.901

# 11.06.900

# 11.06.912

# 11.06.913

# 11.06.910

31 - 45 mm

M6 x 20 mm

M6 x 30 mm

# 11.06.904

38 - 46 mm

M6 x 20 mm

M6 x 38 mm

# 11.06.920

TUBE M6 SIZES L = 12, 15, 20, 25, 28, 31, 38 mm L= 14 mm NPL L= 14 mm BPL L= 14 mm BRZ L= 20 mm NPL

# 11.06.905 # 11.06.907 # 11.06.908 # 11.06.906

Ø8 L

SCREW M6 SIZES L = 14, 20, 25, 30, 35, 45 mm

M6 L

Upon request

THREADED TUBE M6 X Ø8 MM L = 18, 20, 28 mm Upon request

24

M6 L

BLK

available upon request # 11.06.922

CORNER BLOCK 3554 - SCREW ON TYPE

- high quality furniture fittings

CORNER BLOCK 3554 - SCREW ON TYPE Material Plastic outer housing. Inner part BZP Item No. Brown. Inner part BZP White. Inner part BZP

# 11.05.028 # 11.05.033

Apply 4 screws 4,0 mm 15 3

15,8

10,5

9

22

40

33

20,5 15

CORNER BLOCK 3600 15

CORNER BLOCK 3600

32

20

13

Material Plastic outer housing. Zamak camfix inside Item No. Brown

20

15

47

# 11.05.061

Apply 2 screws 3,5 mm for the housing 13 and 2 screws 4.0 mm for inner part

7,5 32

20 20,5

9

20 20,5

47

4

7,5

9

12,2

15,8

CORNER BLOCK "STRONG" - SCREW4 ON TYPE 20,5

CORNER BLOCK "STRONG" - SCREW ON TYPE

Item No.

9

12,2

15,8

Material Zamak outer housing Premounted steel screw Steel part inner Apply 4 screws 4 mm

4

22

40

30,5 20,5

# 11.05.036

22

6

12,2

22

40

21 15

22

40

40

21

30,5

9

15 15,8

15

40

12,2

15,8

20,5

15

22

9

21

4

4

1

15,8

21 30,5

6

6

30,5

25

30,5

- high quality furniture fittings

CORNERFIX NO. 100 W/COVER

CORNERFIX NO. 100 W/COVER Material Plastic Apply 2 screws 4 mm Item No. White Dark brown (RAL 8017) Light brown (RAL 8001) Black

# 11.05.200 # 11.05.210 # 11.05.220 # 11.05.240

10 10 21

21

18

CORNERFIX NO. 200 W/COVER CORNERFIX NO. 200 W/COVER Material Plastic Apply 4 screws 4 mm Item No. Light brown (RAL 8001) Dark brown (RAL 8017) Ivory White Black

# 11.05.110 # 11.05.120 # 11.05.130 # 11.05.140 # 11.05.150

10 10 21 44

21

25 26

CORNERFIX NO. 300

- high quality furniture fittings

Ø10 CORNERFIX NO. 300

6

Material Plastic Apply panhead screws 4,5 mm or euroscrew panhead 6,3 mm Item No. White

10

15,5

# 11.05.810

Ø10

CORNERFIX MODEL "BUTTERFLY"

CORNERFIX MODEL "BUTTERFLY" with premounted screw Material Zamak raw Item No.

# 11.05.100

3 21

3

15

18

21 24 35

22

24 35

22

METAL CORNER CLIP

METAL CORNER CLIP

27

38

Material Steel. Bright zinc plated Item No. Size 21 x 38 x 28 mm # 24.09.010 Size 30 x 27 x 27 mm # 24.09.020

30

21

27

EXPANSION -, MITRE DOWEL & SNAP FITTING

- high quality furniture fittings

EXPANSION DOWEL MODEL 1703

EXPANSION DOWEL MODEL 1703 Applied for assembly of drawers and smaller cabinets

Ø7 30

11,3

Material Plastic Item No.

# 11.06.030

A = 6,3 - 6,4 mm C = 8 mm

A

C

MITRE DOWEL MODEL 2525

Ø6

MITRE DOWEL

25

Material White polyethylene Item No. Model 2525 Model 2521

MODEL 2521

# 11.06.052 # 11.06.050

90°

135°

SNAP FITTING # 214

SNAP FITTING # 214 Bore Ø 10 mm Material Nylon, White Max load capacity pr. set 9 kg Item No. # 11.06.011 (2 parts)

28

10 mm 9 mm 5

30

14 mm

Ø8

30

SNAP FITTING “DIVA” - high quality furniture fittings

SNAP FITTING ”DIVA” Application: Ideal for applications that require less depth compared to SISO´s “Bone” system. Perfect for upholstery furniture where strong & hidden solutions are desired.

Not suitable for ceiling installations.

Material: PC, Grey Panel thickness: Min. 5 mm

ED

NT PATE

female part

male part

female part

29

SNAP FITTING “DIVA” - high quality furniture fittings

4,8

Snap Fitting "Diva" Female Part, Grey PC, Ø12 x 5 mm Item No.: 11.06.017

12

1

4

5

6

A

8,50

A

9,20

6,53

1

C

2

3

4

A

5

FINISH:

DATE

AS

09-2019

9,50

NAME

DEBUR AND BREAK SHARP EDGES

TITLE:

Item No: 11.06.019

DWG NO.

PC

9,2

6,53

2

SCALE: 5:1

--

WEIGHT:

1

11.06.018-A

1

1,59

MATERIAL:

2

3

A

Snap Fitting Diva 0 mm.

DS/ISO 2768-1 M

1

C

00

REVISION

SISO Denmark

UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETER TOLERANCES:

D

6

DO NOT SCALE DRAWING

Grey color

B

B

0

B

Item No: 11.06.018

Snap Fitting "Diva" Male Part - 1 mm, Black PC, Ø10 x 9,5mm

3

0,59

Snap Fitting "Diva" Male Part - 0 mm, Grey PC, Ø10 x 8,5mm

2

A4 B

SHEET 1 OF 1

4

5

6 C

C

Snap Fitting "Diva" Male Part - 1,5 mm, Green PC, Ø10 x 10mm

A

A FINISH:

DO NOT SCALE DRAWING

SISO Denmark

9,25

1

A

Snap Fitting "Diva" Male Part - 2 mm, Blue PC, Ø10 x 10,5mm

TITLE:

MATERIAL:

Snap Fitting Diva 1 mm.

2

11.06.019-A

DWG NO.

PC

6,53

2

1

DEBUR AND BREAK SHARP EDGES

DS/ISO 2768-1 M

B

Item No: 11.06.020

09-2019

UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETER TOLERANCES:

2,09

D

DATE

as

1,50

10

Black color NAME

3

SCALE: 5:1

--

WEIGHT:

00

REVISION

4

A4

B

A

C

SHEET 1 OF 1

5

6

C

FINISH:

10,50

DO NOT SCALE DRAWING

2,59

B

D

NAME

DATE

as

09-2019

2

DEBUR AND BREAK SHARP EDGES

TITLE:

Snap Fitting Diva 1,50 mm.

UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETER TOLERANCES:

DS/ISO 2768-1 M

Item No: 11.06.021

MATERIAL:

9,27

PC

2

1

2

3

SCALE: 5:1

--

WEIGHT:

4

B

11.06.020-A

DWG NO.

6,53

1

00

REVISION

SISO Denmark

Green color

A4

SHEET 1 OF 1

5

6

C

C

Snap Fitting "Diva" Male Part - 2,5 mm, Red PC, Ø10 x 11mm

A

A

FINISH:

DO NOT SCALE DRAWING

DATE

as

09-2019

B

DEBUR AND BREAK SHARP EDGES

TITLE:

Snap Fitting Diva 2 mm.

UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETER TOLERANCES:

DS/ISO 2768-1 M MATERIAL:

9,29

1

1

6,53

2

2

3

SCALE: 2:1

--

WEIGHT:

4

B

11.06.021-A

DWG NO.

PC

Item No: 11.06.022

00

2,50

11

NAME

3,09

D

REVISION

SISO Denmark

Blue color

A4

SHEET 1 OF 1

5

6

C

C

A

FINISH:

DO NOT SCALE DRAWING

B

NAME

DATE

as

09-2019

DEBUR AND BREAK SHARP EDGES

TITLE:

UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETER TOLERANCES:

DS/ISO 2768-1 M MATERIAL:

DWG NO.

PC

Item No: 11.06.023 30

1

C

9,30

2

WEIGHT:

--

REVISION

SISO Denmark

Red color

SCALE: 2:1

00

3

11,50 D

3,59

Snap Fitting "Diva" Male Part - 3 mm, White PC, Ø10 x 11,5mm

A

Snap Fitting Diva 2,50 mm.

11.06.022-A

B

A4

SHEET 1 OF 1

6,53

C

SNAP FITTING ”BONE”

- high quality furniture fittings

SNAP FITTING ”BONE” Application Knock down, concealed fastening.

Built in furniture securely fastened and disconnected at any time.

Not suitable for ceiling installation Material Nylon, White Bore Ø 10 x 10 mm Item No. Female Male

# 11.06.015 # 11.06.016

17

10 for Ø10 hole

Ø7

10 Ø5,7

for Ø10 hole

Max. 10,5

31

CLIP CONNECTOR “DOVETAIL”

- high quality furniture fittings

CLIP CONNECTOR “DOVETAIL” Application A concealed, self-tightening, clip connector for fast installation, used mostly for the mounting of mouldings onto surfaces.

Use a plunge router to make a pocket groove in each component to be joined.

Material POM, Brown Size 6,9 x 13 x 19 mm (W/H/L) Clip Connector Item No. # 11.05.840 Router Item No.

#11. 05. 841

19,8

6,9

6,80

13,2

5,3 Router

6,8

6,9

32

6,80

TWIST & TIGHT - CHAIR ASSEMBLY

- high quality furniture fittings

Ideal knock down system for assembly of chairs.

Due to the combination of a left + right hand thread you can TIGHTEN the cross bars on your chair in one TWIST (move).

A system which gives the end-user the possibility of retightening the chair.

Twist and it will tighten

30

2

10 4,5

48 Ø12

6 20

Ø10 TWIST & TIGHT - CHAIR ASSEMBLY Material Steel. Black zinc plated Item No. Right turn, bushing 1/4" x 20 mm, bore Ø8 mm Right turn, twister dowel 7 x 31 mm, bore Ø5 mm, 1/4" x 16 mm

# 11.04.315 # 11.04.320

Material Steel. Bright zinc plated Item No. Left turn, bushing 1/4" x 20 mm, bore Ø8 mm Left turn, twister dowel 7 x 31 mm, bore Ø5 mm, 1/4" x 16 mm

# 11.04.305 # 11.04.325

33

- high quality furniture fittings

CLIP PANEL CONNECTOR "PUSH FIT"

CLIP PANEL CONNECTOR "PUSH FIT" Designed to allow panels to be directly mounted from the front. The panel component locks into the frame element as the panels are pushed together.

The strong clamping effect is sufficient to hold even heavy panels securely, yet the fasteners may be quickly released again without any special tools.

Frame side may be mounted in system holes with euro screws or with wood screws.

Material PC, Black Max load capacity pr. set 20 kg Item No.: Female Part for chipboard screws Male Part for chipboard screws Female Part for euro screws Male Part for euro screws

# 11.05.605

# 11.05.606

*Not for sale in Germany # 11.05.601 # 11.05.602 # 11.05.605 # 11.05.606

37

8 32

32

15 8

16 9 4

16 32

23

6

36

10

32

48

8

CLIP PANEL CONNECTOR ”PUSH-FIT” W/HOOK CLIP PANEL CONNECTOR ”PUSH-FIT” W/HOOK Item No.: Female Part for euro screws Hook Male Part for euro screws

# 11.05.605 # 11.05.607

# 11.05.605

# 11.05.607

*Not for sale in Germany

9

34

15 8

48

23

32

48

13,5 32

32

8

4

32

16

8

SUSPENDED HANGER FITTINGS

- high quality furniture fittings

SUSPENDED HANGER FITTING Material PC, Black Max load capacity pr. set 20 kg Item No.: Female part for chipboard screws Male part for chipboard screws Female part for euro screws Male part for euro screws

# 11.05.618-0 # 11.05.619-0 # 11.05.618-5 # 11.05.619-9

# 11.05.619

# 11.05.618

*Not for sale in Germany

15,7 19,7

48,1 4

16 4,1

10

4

22,2

15,02

8

60

32

32

15

16

R4

R4

5,8

SUSPENDED HANGER FITTING W/ANGLED MALE PART Material PC, Black Max load capacity pr. set 20 kg Panel distance: 30 mm Item No.: Male part for chipboard screws # 11.05.620 Female part for chipboard screws # 11.05.618 14

20

32

12

# 11.05.618

# 11.05.620

*Not for sale in Germany

32

14

30 4

32

6

SUSPENDED HANGER FITTING W/SIDE GUIDE Material PC, Black

8

Max load capacity pr. set 20 kg Item No.: Male & female for chipboard screws

# 11.05.621 # 11.05.621

*Not for sale in Germany

22 4 15,7

32 16 4

60

15

10 R4

6

35

CABINET HANGER “CLIFF” - high quality furniture fittings

CABINET HANGER “CLIFF” Ideal for hanging up cabinets or panels.

Material:

PC, Black

Max load capacity: 250 kg by use of 4 sets Panel distance: 13 mm Horizontal adjustment: ±12,5 mm #11.05.650 #11.05.651 13

47,50

40

40

32

82,50 min.

10,75

30,50

9,50

Item No.: Male part

Female part

12,50 mm.

42 8,50

32 4,20 THRU ALL 9,00 X 90°

21,50

10,75

12,50 mm.

4,20

10,7

52,50

±12,5 mm horizontal adjustment

13 mm

Cabinet/panel

36

Wall

PANEL CLICK BUTTON CONNECTOR

- high quality furniture fittings

Application The Panel Click button connector is perfect for mounting ceiling and wall panels in areas with minimal frame and panel thickness.

To be fixed by screws Ø5 mm or glue.

Male

20,5

PANEL CLICK BUTTON CONNECTOR

Ø15,3

20,5 Ø

1,

5

Ø5

Specification Grey PC material

Ø17,6

Ø5 Ø

Size 20,5 x 20,5 mm Screw holes Ø5 mm

7

Easy installation by use of locator button 10 mm panel distance after mounting Max pull out load 5 kg. per. button.

Item No. Male Female

7,25

20,5

Female

7,86

20,5 Ø

1,

# 11.05.818-5 (without screws) # 11.05.819-5 (without screws)

5

Ø4

,9

8

Locator button to be bought separately Item No. # 11.05.821 R8,0

6

Ø4

,98

Ø

Press and click together

97

6,

10 mm

Locator button Ø29,7 2,8

Ø28

8 mm

Ø4 mm predrilled suited

Click locator on female part

1

2

STABILIZER STICK FOR CLICK BUTTON SYSTEM Application Used to stabilize and strengthen the edges of the panels

Item No.

# 11.05.825

Remove locator on female part . Fasten male part through drilled hole with screw

3

10

Ø4 mm predrilled hole

4

15

20

20

15

10 10

Specification Grey PC material Size 20 x 90 mm Screw holes Ø5 mm

Drillmark (Dot)

Press other material part towards the locator to make mark for drilling

20

90

10 Ø5

Ø10

37

- high quality furniture fittings

MULTI CLIP

MULTI CLIP

64

64

44

15

Multipurpose clip connector for furniture. Allows preassembly of sub-frames and fittings in the workshop.

All of the panels, once installed, can be easily removed at any time and with no special tools.

Mounted with chipboard screws.

6

9,5

11,3

15 32

32

32

4

Material PC, Black Max load capacity pr. set 20 kg Item No.: # 11.05.610

(1 Pce - universal)

FOR ONE CONNECTION YOU NEED 2 PCS

PANEL CONNECTOR RV 3 23,5

REAR PANEL CONNECTOR RV 3 Short arm for 3-5 mm rear panel Apply screw 5 - 5,5 mm Item No. Brown White

11 Ø7,7 6,5 4

# 11.05.500 # 11.05.501

23 5

25,5

20,5

REAR PANEL CONNECTOR VB-500 max 5 REAR PANEL CONNECTOR VB-500 Long arm for rear panel max 5 mm Apply screw 3,5 mm & 5,5 mm

Ø10

15 Ø5

Material Zamak nickel plated Item No.

# 11.05.520

2,2 15

38

37

6

STABILIZER F/DRAWERS & BACK PANELS

- high quality furniture fittings

15

STABILIZER F/DRAWERS & BACK PANELS 1

Material Plastic - White

10

W/Premounted screw # 11.05.700

KEYHOLE FIXTURE MODEL 726 KEYHOLE FIXTURE MODEL 726 Stamped fitting made of heavy gauge steel for mounting pictures, shelves, notice boards, ornaments clocks etc.

Designed to be attached to a surface or inlay, allowing a 5 mm countersunk or panhead screw to be inserted into the hole and retained by the lower narrow space, and 4 mm screw for attachment of the fixture to the panel Material Steel BZP Item No.

42

20 32

5,5

2x 15

Ø5

,2

2

# 11.06.810

KEYHOLE FIXTURE MODEL 724

KEYHOLE FIXTURE MODEL 724

19 32

5,8

Twin hole multipurpose fitting apply 5 mm panhead or countersounk screws to be inserted and retained and 4 screw for attachment of the fixture to the panel

75

Material Steel BZP Item No.

19 32 # 11.06.800

15

3x

Ø5

,2

3

39

BED RAIL BRACKET MODEL 3750

- high quality furniture fittings

BED RAIL BRACKET MODEL 3750 Material Steel

15

29 9

One set consist of 4 male parts 4 female parts

4 x Ø4 x 25

Item No. Yellow zinc plated # 11.01.060 Bright zinc plated # 11.01.061

130

130

2,5

1,5

4 x Ø4 x 17

10

BED RAIL BRACKET MODEL 3553

BED RAIL BRACKET MODEL 3553 Material Steel

21,8

95

Ø6

23,5

23,5

One set consist of 4 male parts 4 female parts

24,5

Item No. Yellow zinc plated # 11.01.010

25 18,29

5,4

Ø5,5

2,5

BED RAIL BRACKET MODEL 3704 BED RAIL BRACKET MODEL 3704 Double hooks Rounded corner Material Steel

140 12,5

One set consist of 4 male parts 4 female parts

15

Item No. Model 3704 - 140 mm Bright zinc plated # 11.01.035

62

40

62

SUPPORT BRACKET MODEL 3892

- high quality furniture fittings

SUPPORT BRACKET MODEL 3892 Mounting diagram

Material Steel, yellow zinc plated Item No. Male part Female part

Centre tie-bar

# 11.02.035 # 11.02.040

67

32

5,5

Supporting bracket

38,5

35 Head or foot

7

70

1,75

Retaining plate

39

SUPPORT BRACKET MODEL "REGULO" SUPPORT BRACKET MODEL "REGULO"

Mounting plate

Material Steel

approx. 80

Mounting plate

Tie-bar

Slatted bed/ sofa frame

One set consist of 1 male part 1 female part Item No. Yellow zinc plated # 11.01.110 Head or foot board

48

5

Bed side panel Supporting bracket

* Refer to mounting notes

2

Refer to mounting notes

Supporting bracket

2 45 140 2 36 70

Three-stage vertical adjustment of tie-bar on double bed

Three-stage vertical adjustment of slatted base on single or double bed

24 24 24

35

45 12

41

JOINT CONNECTOR "ZIMAK"

- high quality furniture fittings

JOINT CONNECTOR "ZIMAK" Apply where invisible joints of great strenght are desired such as beds, tables and other corpus constructions Material Zamak, raw Item No. Female part Male part

# 11.01.500 # 11.01.501

Apply screws 4 - 4,5 mm for attachment of this fitting to panels

1,8

3 x Ø5

3 x Ø5

47

42

52

45,5

24

27,5

6

9,5

9

10,7

17

17

ROW CONNECTOR ROW CONNECTOR Ideal to connect rows of furniture such as chairs, tables etc.

Material Nylon, black Item No. Male part

Female part

# 06.05.066 # 06.05.067

Screws to be bought seperately

R24,5

Ø4 18,5

29

42

BEECH WOOD DOWELS

- high quality furniture fittings

BEECH WOOD DOWELS SISO wooden dowels are properly dried and manufactured according to DIN norm Item No. Ø x L 6 x 20 mm 6 x 25 mm 6 x 50 mm 8 x 30 mm 8 x 35 mm 8 x 40 mm 8 x 50 mm 10 x 35 mm 10 x 40 mm 10 x 50 mm

# 11.06.059 (only birch) # 11.06.060 # 11.06.150 # 11.06.170 # 11.06.180 # 11.06.190 # 11.06.210 # 11.06.282 # 11.06.291 # 11.06.310

L Ø

Other sizes up-on request.

Also available in birch on request

WOODEN JOINING BISCUITS WOODEN JOINING BISCUITS The wooden biscuits are made from cross branded laminations of compressed birch wood. Birch timber provides superior strength and consistent plate thickness suitable for joining wooden panels such as chipboard and MDF Item No. 53 x 19 x 4 mm # 11.06.361 56 x 23 x 4 mm # 11.06.362

53/56

19/23

EURO SCREWS

EURO SCREWS Item No. Countersunk head Ø6,3 x 11 mm # 11.04.603 Ø6,3 x 14,5 mm # 11.04.634

11/14,5 Ø6,3 11/13/14,5 Ø6,3 43

KEA SCREW-IN BUSHING

- high quality furniture fittings

Tool for insert.

Item No. # 11.07.025

KEA SCREW-IN BUSHING W/SPRING-LOADED INTERNAL THREAD Material

Zamak, plain

Bore

Ø22 mm x 15 mm

Threaded hole M8 & M10 Item No.

M8 M10

# 11.07.010 # 11.07.011

KEA BUSHING FOR TABLES The perfect solution for coffee and dining tables.

The KEA solution gives you the possibility to tighten and adjust your table leg in any position due to its patented internal spring-loaded system.

With a traditional bushing you normally reach a point where you cannot turn in the hangerbolt any further. If you then have a square table leg that has to be flush with the edge of the table you have a problem. Only by heavy force you can try to turn your table leg further and risk that the wood cracks.

This will not happen with the KEA bushing due to its patented internal spring-loaded system.

44

M8 or M10

Ø22

15

KEA SCREW-IN BUSHING

KEA SCREW-IN BUSHING TRIANGULAR PLATE W/SPRING-LOADED INTERNAL THREAD

M8 or M10

65

123,5

Material

Zamak, plain

Size

123,5 x 33 x 65 mm

Threaded hole M8 & M10 Item No.

33 19,5

44,5

- high quality furniture fittings

25

M8 M10

# 11.07.015 # 11.07.016

The triangular KEA has been tested by SP Swedish National Testing and Research Institute and has proven strong even for bed frame use

11,5

M8 or M10

49 Ø6,5 15

45

KEA SCREW-IN BUSHING

- high quality furniture fittings

KEA SCREW-IN BUSHING SQUARE PLATE W/SPRING-LOADED INTERNAL THREAD Material

Zamak, plain

Size

47,5 x 47,5 mm

Threaded hole M8 & M10 Holes

c/c 32 mm

Item No.

M8 M10

# 11.07.001 # 11.07.002

11,5

47,5

32

M8 or M10

M8 or M10 Ø6,5

47,5

46

32

15

KEA SCREW-IN BUSHING

KEA SCREW-IN BUSHING ROUND PLATE W/SPRING-LOADED INTERNAL THREAD Material

Zamak, plain

Size

Ø60 mm

- high quality furniture fittings

Flush mounting for strength

Threaded hole M8 & M10 Hole

c/c 32 mm

Item No.

M8 M10

# 11.07.005 # 11.07.006

3,5

11,5 M8 or M10

M8 or M10

32 Ø60

Ø5 15

47

LEG CORNER BRACKETS - high quality furniture fittings

MODEL 21 Height: 60mm

100 mm

1 Hole f/M8 or M10 Bolt

Steel thickness 1,5mm: Steel, Yellow Zinc, 6 micron Steel, Bright Zinc

60 mm

32 mm

# 11.07.035 # 11.07.030

48 mm

Ø5 mm

MODEL 22 Height: 60mm

126mm

1 or 3 Holes f/M8 or M10 Bolt

1 Hole: Steel thickness 2,0mm: Steel, Yellow Zinc, 6 micron Steel, Bright Zinc

# 11.07.042 # 11.07.040

3 Holes: Steel thickness 2,0mm: Steel, Yellow Zinc, 8 micron Steel, Bright Zinc

# 11.07.043 # 11.07.041

48 mm

Ø5 mm

MODEL 23 Height: 40mm

60 mm

58 mm

93 mm

1 Hole f/M8 or M10 Bolt

Steel thickness 1,5mm: Steel, Yellow Zinc, 6 micron Steel, Bright Zinc

40 mm

24 mm

# 11.07.051 # 11.07.050 48 mm

Ø5 mm

MODEL 26 Height: 50mm

100 mm

1 Hole f/M8 or M10 Bolt

Steel thickness 2,0mm: Steel, Yellow Zinc, 6 micron Steel, Bright Zinc

50 mm

32 mm

# 11.07.066 # 11.07.065 48 mm

Ø5 mm

48

LEG CORNER BRACKETS - high quality furniture fittings 80 mm

MODEL 27

54 mm

Height: 32mm 1 Hole f/M8 or M10 Bolt Steel thickness 2,0mm: Steel, Bright Zinc

32 mm

# 11.07.070 Ø5 mm

16 mm 120 mm 50 mm

MODEL 28 Height: 85mm

85 mm

2 Holes f/M8 or M10 Bolt

Steel thickness 2,0mm: Steel, Bright Zinc

# 11.07.076

51 mm

Ø5 mm 117 mm

MODEL 29 Height: 70mm

58 mm

2 Holes f/M8 or M10 Bolt

Steel thickness 1,5mm: Steel, Bright Zinc

70 mm

# 11.07.081

42 mm

Ø5 mm 4x

45,50

66

45,50

Material: Steel, Bright Zinc Plated Size: 66 x 58 x 1,8 mm Hole: M8 Item No.: # 06.11.151

3,80 THRU ALL 6,50 X 90°

30,5

LEG BRACKET - FLAT

M8x1,25

58 7,50

1,8

LEG BRACKET - 10 DEGREE ANGLE 1,80

Material: Steel, Bright Zinc Plated Size: 66 x 58 x 1,8 mm Hole: M8 Item No.: # 06.11.150

45,50

4x

3,80 THRU ALL 6,50 X 90°

40° 80

° 58 45,50

40°

R8

66 10

M8x1,25

49

HANGERBOLTS & TOOL FOR INSERTING - high quality furniture fittings

HANGERBOLTS

Material: Steel Finish: Yellow Zinc or Bright Zinc Size

Item No.:

Size

Item No.:

M4 x 25 mm

# 12.13.000

M8 x 100 mm

# 12.13.037/38

M4 x 50 mm M6 x 50 mm

# 12.13.001 # 12.13.006/08

M10 x 50 mm M10 x 60 mm

# 12.13.150 # 12.13.160/61

M6 x 60 mm

# 12.13.016/17

M10 x 70 mm

# 12.13.170

M8 x 50 mm

# 12.13.022/23

M10 x 80 mm

# 12.13.180

M8 x 60 mm

# 12.13.027

M10 x 90 mm

# 12.13.190

M8 x 70 mm

# 12.13.031/32

M10 x 100 mm

# 12.13.200

M8 x 80 mm

# 12.13.035

M10 x 120 mm

# 12,13.205

Other sizes on request

M4 to M10

51 TOOL FOR INSERTING HANGERBOLTS Size

Item No.:

M6

# 12.13.100

M8 M10

# 12.13.105 # 12.13.115

50

1.

2.

3.

4.

HEXAGONAL NUT, WING NUTS & WASHERS

- high quality furniture fittings

HEXAGONAL NUT DIN 934 Material

Steel

Finish

Yellow zinc or bright zinc

Item No. Size M6 M8

M10

# 12.11.905/906 # 12.12.015/016 # 12.12.026/027 M6 to M10

HEXAGONAL NUT W/NYLON RING DIN 985 Material

Steel & nylon

Finish

Yellow zinc or bright zinc

Item No. Size M6 M8

M10

# 12.12.421 # 12.12.440 # 12.12.445

M6 to M10

WING NUT Material

Steel

Finish

Yellow zinc or bright zinc

Item No. Size M6 M8

M10

# 12.12.050/051 # 12.12.055/058 # 12.12.060/061

WASHERS Material Steel, Yellow Zinc Plated

or Bright Zinc Plated,

Brass, Natural Stainless Steel, Natural Sizes

Inner diameter 6,4/8,4 & 10,5 mm

Type

Flat washer DIN 125-A Spring washer DIN 127 Serrated lock washer DIN 6798A

Item No. 12.13.294 etc.

M6 to M10

Spring washer Serrated lock washer

Flat washer

WRENCH KEY F/HEX NUTS

Material

Steel, yellow zinc plated

Hex

8 mm (other on request)

86

Item No. Hardened steel # 12.06.155 Unhardened steel # 12.06.150

13

12

51

- high quality furniture fittings

LOCATING PINS

LOCATING PIN “SMAG” Application: Locating pin with integrated hold function. Ideal for connecting table tops, without using a classic table catch.

Material: Size: Finish:

Steel & plastic Ø8 x 36,30 mm Yellow zinc plated & black

Item No.:

Female Male

# 11.06.865 # 11.06.866

Ø8

21,75

9,50

14,50

LOCATING PINS 10 mm

Material: Size: Finish: Item No.:

Zamak Ø8 x 21 mm Yellow Zinc 2-3 Micron Male & Female

Material: Size: Finish: Item No.:

Brass Ø8 x 21,5 mm Natural Male Female

Material: Size: Finish: Item No.:

# 11.06.870 10,5 mm 11 mm

# 11.06.855 # 11.06.856

Steel Ø8 x 22 mm Yellow Zinc 12 Micron or Bright Zinc 3 Micron Male - BZP # 11.06.846 Female - BZP # 11.06.845 Male - YZP # 11.06.850 Female - YZP # 11.06.849

Material: Size: Finish: Item No.:

Steel Ø8 x 22 mm Yellow Zinc 12 Micron Male & Female

Material: Size: Finish: Item No.:

Nylon Ø8 x 26 mm Brown Male Female

52

11 mm

11 mm 11 mm

11 mm 11 mm

10 mm 12 mm

# 11.06.851 13 mm 13 mm

# 11.06.890 # 11.06.891

FIFTEEN SCREWS & BOLTS

- high quality furniture fittings

THREADED BOLTS Material

Steel, yellow zinc plated (other finishes on request) Stainless Steel, Natural Brass, Natural

Thread

M6 or M8

Lengths

From 18 up to 1000 mm

Item No.

# 12.08.123 etc.

Steel, (YZP)

FIFTEEN SCREWS Material

Steel, yellow zinc plated (other finishes on request) Stainless Steel AISI 316 Brass, Natural

Head size

Ø15 x 2,5 mm (Ø13 & 17 mm on request)

Hex size

4 mm

Thread

M6 (M8 on request)

Lengths

25/30/35/40/45/50/60/70/80/90/100 & 120 mm

Type

With 3 mm point or conical (see illustration)

Item No.

# 12.00.791 etc.

Stainless Steel AISI 316

Steel, (YZP)

Conical

Point

FIFTEEN WOOD SCREWS

Material

Steel, yellow zinc plated (other finishes on request)

Head size

Ø15 x 2,5 mm

Hex size

4 mm

Thread

Ø6,3 mm

Lengths

40/50/60 & 70 mm (other sizes on request)

Type

With point (see illustration)

Item No.

# 12.01.340 etc.

Stainless Steel AISI 316

Steel, (YZP)

Point 53

MUSHROOM SCREWS & INSEX SCREWS

- high quality furniture fittings

MUSHROOM SCREWS Material

Steel, yellow zinc or black oxidized Other materials & finishes on request

Head size Ø15 mm Hex size

4 mm (5 mm on request)

Thread

M6 (M8 on request)

Lengths

12/16/20/23/30/32/38/45/50/60/63/90 mm (other lengths on request)

Type

Blunt (Point on request)

Item No.

# 12.03.110 etc.

Blunt

VARIOUS STAINLESS STEEL SCREWS, NUTS & WASHERS Ask for any screw, nut & washer in stainless steel and we will quote you. No stock item.

All on request

INSEX SCREWS Material

Steel, yellow zinc, brass plated or black oxidized Other materials & finishes on request

Head size

Ø12 x 4 mm (counter sunk)

Hex size

4 mm

Thread

M6 (M8 and M10 on request)

Lengths 32/35/38/44/50/51/57/60/63/76/90/

100/120/126 mm

(other lengths on request) Type

Pointed or blunt (see illustration)

Item No.

# 12.04.004 etc.

Point

Blunt

DRILL BIT F/INSEX SCREWS & COLLARS Twin set boring bits for ø7 mm and ø13 mm in one operation Item No.

# 12.18.010

13

Ø7 adjustable 54

INSEX COLLARS & KEYS

- high quality furniture fittings

INSEX COLLARS - STEEL W/SHAFT Ø20 Material

Steel, yellow zinc plated

Size

Ø20 x 16 mm x M6

Item No.

# 12.05.070

2,4 16

1

2

3

4

5

A

Ø6 Ø9

6

A

1,25

16

4

B

Material

12

5,20

INSEX COLLARS - BRASS Brass

Size

B

7 12,95

Ø13 x 4 mm x M6

C

C

Item No. Brass Natrual

# 12.05.050

FINISH:

DO NOT SCALE DRAWING

1

Steel, hardened

Hex

4 or 5 mm or combi key with 4 & 5 mm

Finish

Bright zinc plated (BZP) or black zinc plated

Type

L-shaped or Z-shaped

Type

Size

Hex

Finish

Item No.

L-shaped

23 x 65 mm

4 mm

Black

# 12.06.010

L-shaped 28 X 65 mm

4 mm

BZP

# 12.06.015

L-shaped 31 X 75 mm

5 mm

BZP

# 12.06.021

Z-shaped 23 X 43 mm Z-shaped 22 X 48 mm

4 mm 5 mm

BZP BZP

# 12.06.035 # 12.06.040

Z-shaped 35 X 50 mm

4 & 5 mm

BZP

# 12.06.027

as

01-2018

DEBUR AND BREAK SHARP EDGES

MATERIAL:

Insex collar No. 1239 DWG NO.

Brass 2

WEIGHT:

--

00

TITLE:

DS/ISO 2768-1 M

2:1

Material

DATE

UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETER TOLERANCES:

D

INSEX KEYS

NAME

REVISION

SISO Denmark

-

12.05.050-A

SCALE: 5:1

A4

SHEET 1 OF 1

Z-shaped combi key Z-sh 5 mm hex

4m mm hex

L-shaped insex key L k

INSEX KEYS W/BALL POINT

Material

Steel, bright zinc plated

Hex

4, 5 or 6 mm

Type

L-shaped

Type

Size

Hex

Finish

Item No.

L-shaped

28 x 73 mm

4 mm

BZP

# 12.06.061

L-shaped 15 X 65 mm

5 mm

BZP

# 12.06.063

L-shaped 16 X 63 mm

6 mm

BZP

# 12.06.062

55

INSEX COLLARS & CROSS DOWELS

- high quality furniture fittings

CROSS DOWELS

Bright zinc plated

B

A

C

Material

Steel, brass or stainless steel

Type

With slot

Finish

Steel, yellow zinc plated (YZP) Bright zinc plated (BZP), brass, natural Stainless steel, (SS), natural

D*

Distance from centre of hole to edge

A M6 M6 M6 M6 M6 M6 M6 M6 M6 M6 M6 M6 M8 M8 M8 M8 M8

D D

Stainless steel

Brass Yellow zinc plated

B Ø 10 mm Ø 10 mm Ø 10 mm Ø 10 mm Ø 10 mm Ø 10 mm Ø 10 mm Ø 10 mm Ø 10 mm Ø 10 mm Ø 10 mm Ø 10 mm Ø 12 mm Ø 12 mm Ø 12 mm Ø 12 mm Ø 12 mm

C D* 13 mm 8/5 mm 14 mm 8/6 mm 14 mm 8/6 mm 14 mm 8/6 mm 16 mm 10/6 mm 18 mm 12/6 mm 30 mm 20/10 mm 20 mm 10/10 mm 25 mm 12,5/12,5 mm 30 mm 15/15 mm 40 mm 20/20 mm 45 mm 22,5/22,5 mm 20 mm 10/10 mm 25 mm 12,5/12,5 mm 30 mm 15/15 mm 50 mm 25/25 mm 60 mm 30/30 mm

Material Steel Steel Brass SS Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel

Finish Item No. Plain # 12.07.006 BZP/YZP # 12.07.030/31 Natural # 12.07.041 Natural # 12.07.043 YZP # 12.07.044 YZP/BZP # 12.07.327/328 BZP # 12.07.350 BZP/YZP # 12.07.070/071 BZP # 12.07.110 BZP # 12.07.150 BZP # 12.07.230 BZP # 12.07.270 YZP # 12.07.287 BZP # 12.07.288 YZP # 12.07.289 BZP/YZP # 12.07.291/92 BZP # 12.07.325

CROSS DOWEL NO. 3250 W/2 HOLES Bright zinc plated

B D A C A

56

E

Material

Steel

Type

With slot

Finish

Steel, Bright zinc plated (BZP)

D*

Distance from centre of hole to edge

A M6 M6 M6

B C D* E Material Ø 10 mm 60 mm 14 mm c.c. 32 mm Steel Ø 10 mm 60 mm 10 mm c.c. 40 mm Steel Ø 10 mm 82 mm 9 mm c.c. 64 mm Steel

Finish BZP BZP BZP

Item No. # 12.07.465 # 12.07.500 # 12.07.570

CONFIRMAT SCREWS

- high quality furniture fittings

SCREWS Ø5 MM Material

Steel, bright zinc plated (other materials & finishes on request)

Thread

Ø5 mm

Lengths

30/40 mm or 50 mm

Type

Pozidrive or 3 mm hex (see illustration) With & without hole for cover cap

Item No.

# 12.17.005 etc.

Ø7

Ø5 Ø3 Lenghts

POZI

HEX

SCREWS Ø6,3 MM Material

Steel, bright zinc plated (other materials & finishes on request)

Thread

Ø6,3 mm

Lengths

40 mm or 50 mm

Type

Pozidrive or 4 mm hex (see illustration) With & without hole for cover cap

Item No.

# 12.17.021 etc.

Ø6,3

Ø9

Ø4 Lenghts

POZI

HEX

SCREWS Ø7 MM Material

Steel, bright zinc plated (other materials & finishes on request) Ø7 Ø4

Thread

Ø7 mm

Lengths

40/45/50/60/70/85 mm

Type

Pozidrive or 4 mm hex (see illustration) With & without hole for cover cap

Item No.

# 12.17.027 etc.

Ø10 Lenghts

POZI

HEX

COVER CAPS F/SCREWS Ø5 MM, 6,3 MM & 7 MM

Ø12 Material

Plastic, White, black, grey, brown, teak (other colours on request)

Size

Ø12 or Ø15 mm

Item No.

# 12.17.180 etc.

Ø15

57

WOOD SCREWS

- high quality furniture fittings

DIN 95 Material

Brass, Stainless Steel, Steel, Yellow Zinc Plated

Diameter

Length

From Ø1,6 mm up to Ø6,0mm From 8 mm up to 120 mm

DIN 96 DIN 97

Type Slotted with oval head DIN 95, round head

DIN 96 or countersunk head DIN 97

Pozidrive with oval head DIN 7995, round

head DIN 7996 or countersunk head DIN 7997

DIN 7995 DIN 7996

Item No. 11.07.603 etc.

DIN 7997

CHIPBOARD SCREWS DIN 7505 Material

Steel, Zinc Plated (other materials & finishes on request)

Thread

From Ø3 mm up to Ø6 mm

Lengths

From 12 mm up to 180 mm

POZI

Type Pozidrive with countersunk head (see illustration) Item No.

# 11.10.511 etc.

Packing

SISO box packing or bulk (see illustration)

DOUBLE POINTED STEEL NAILS Application Material

As a concealed connector for slats Steel, Yellow Zinc Plated

Sizes

Ø3,5 x 9 x 15 mm Ø4,0 x 13 x 18 mm

# 12.20.040 # 12.20.050

Mounting By use of self-made steel tube with slot.

Inner diameter Ø 3,5 - 4,0 mm. Tube is to be

inserted into your drilling machine.

58

BRASS COMBIFIX HEADS

- high quality furniture fittings

BRASS COMBIFIX HEAD #1106 M6 WITHOUT COLLAR

A E

Material Brass Finish Brass, Natural Type

C

No collar but with 5 mm open hex hole

A

B

C

D

E

Ø13 mm

0 mm

10 mm

M6

F

G

G

Item No.

D

5 mm Ø12 mm 5 mm # 12.09.690

1°

F

A

BRASS COMBIFIX HEAD #1007 M6 W/OPEN HEX HOLE Material Finish

Brass Brass, Natural

Type

Flat head with 5 mm open hex hole

B

A

B

C

D

E

F

G

Ø12 mm

2 mm

10 mm

M6

5 mm

Ø8 mm

E G

C

Item No.

D F

7 mm # 12.09.090

BRASS COMBIFIX HEAD #1011 M6 W/OPEN HEX HOLE

A

Material Brass Finish Brass, Natural

E

Type

B

Flat head with 5 mm open hex hole

G

C A

B

Ø15 mm 2,25 mm

C

D

E

F

9 mm

M6

5 mm

Ø9 mm

G

Item No.

D F

7 mm # 12.09.130

BRASS COMBIFIX HEAD #1011 M6 W/CLOSED HEX HOLE Material Finish

Brass Brass Plated (BPL) or Nickel Plated (NPL)

Type

Flat head with 5 mm closed hex hole

A

B

C

D

E

F

Ø15 mm

2 mm

10 mm

M6

5 mm

Ø 9 mm

B

G

A E G

C NPL

7 mm # 12.09.132

BPL # 12.09.131

D F 59

BRASS COMBIFIX HEADS

- high quality furniture fittings

BRASS COMBIFIX HEAD #1012 M6 W/OPEN HEX HOLE A B

E G

C D F

Material Finish

Brass or Stainless Steel (SS) AISI 304 Brass, Natural and SS, Natural

Type

Flat head with 4 or 5 mm open hex hole

A

B

C

D

E

F

G

SS

Brass

Ø15 mm

2,25 mm

11,75 mm

M6

5 mm

Ø9 mm

8,5 mm

on request

# 12.09.170

Ø15 mm

2,25 mm

11,75 mm

M6

4 mm

Ø9 mm

7 mm

# 12.09.175

on request

BRASS COMBIFIX HEAD #1013 M6 W/OPEN HEX HOLE

A B

E

Material Brass Finish Brass, Natural

G

C

Type

D F

Flat head with 5 mm open hex hole

A

B

C

D

E

F

G

SS

Brass

Ø15 mm

2,25 mm

18 mm

M6

5 mm

Ø9 mm

12 mm

# 12.09.208

# 12.09.210

BRASS COMBIFIX HEAD #1013 M6 W/CLOSED HEX HOLE Material Brass Finish Brass Plated (BPL) or Nickel Plated (NPL)

A E

B

Type

G

C D F

A

Flat head with 5 mm closed hex hole

B

Ø15 mm 2 mm

C

D

E

F

G

BPL

18 mm

M6

5 mm

Ø9 mm

13 mm

# 12.09.212

BRASS COMBIFIX HEAD #1015 M6 W/OPEN HEX HOLE A E B G

C D F

60

Material Finish

Brass or Stainless Steel (SS) AISI 304 Brass, Natural and SS, Natural

Type

Dome head with 5 mm open hex hole

A

B

C

D

E

F

G

SS

Brass

Ø13 mm

2,50 mm

10,50 mm

M6

5 mm

Ø8 mm

9 mm

# 12.09.265

# 12.09.250

BRASS COMBIFIX HEADS - high quality furniture fittings

BRASS COMBIFIX HEAD #1015 M6 W/CLOSED HEX HOLE Material Finish

Brass Brass Plated (BPL) or Nickel Plated (NPL)

Type

Dome head with 5 mm closed hex hole

A

B

Ø13 mm 3 mm

C

D

E

F

10 mm

M6

5 mm

Ø8 mm

G

A E B

NPL

6 mm # 12.09.252

D

BPL

Brass Brass, Natural

Type

Flat head with 5 mm open hex hole

A

B

Ø19 mm 2 mm

A B

C

D

E

F

G

Item No.

12 mm

M6

5 mm

Ø9 mm

10 mm

# 12.09.410

F

# 12.09.251

BRASS COMBIFIX HEAD #1031 M6 W/OPEN HEX HOLE Material Finish

G

C

E G

C D F

BRASS COMBIFIX HEAD #1042 M6 W/OPEN HEX HOLE A

Material Finish

Brass Brass, Natural

Type

Flat head with 5 mm open hex hole

B

E G

C D

A

B

C

Ø19 mm 2 mm 8 mm

D

E

F

G

Item No.

M6

5 mm

Ø9 mm

6,5 mm

# 12.09.490

F

BRASS COMBIFIX HEAD #1046 M6 W/OPEN HEX HOLE A

Material Finish

Brass Brass, Natural

Type

Dome head with 5 mm open hex hole

A

B

Ø19 mm 3 mm

E B G

C

C

D

E

F

G

Item No.

10 mm

M6

5 mm

Ø9 mm

7,5 mm

# 12.09.530

D F

61

BRASS & STEEL COMBIFIX HEADS - high quality furniture fittings

BRASS COMBIFIX HEAD #1060 M8 W/OPEN HEX HOLE A E B G

C

Material Finish

Brass Brass, Natural

Type

Dome head with 5 mm open hex hole

D

A

B

C

D

Ø17 mm

2,50 mm

11,5 mm

M8

F

E

F

G

Item No.

5 mm Ø10 mm 8 mm # 12.09.570

BRASS COMBIFIX HEAD #1062 M8 W/OPEN HEX HOLE Material Brass Finish Brass, Natural

A E B G

C

Type

D F

Dome head with 5 mm open hex hole

A

B

C

D

E

F

Ø30 mm

4 mm

7 mm

M8

5 mm

G

Item No.

Ø12 mm 6 mm # 12.09.610

STEEL COMBIFIX HEAD # F-563 M6 W/CLOSED HEX HOLE A B

E G

C D F

Material Finish

Steel Brass Plated (BPL) or Yellow Zinc Plated 12 micron (YZP)

Type

Flat head with 4 or 5 mm closed hex hole

A

B

C

D

E

F

G

BPL

YZP

Ø15 mm 2 mm

12 mm

M6

4 mm

Ø9 mm

7 mm

# 12.09.750

# 12.09.696

Ø15 mm 2 mm

12 mm

M6

5 mm

Ø9 mm

7 mm

# 12.09.700

on request

Ø15 mm 2 mm

18 mm

M6

4 mm

Ø9 mm

13 mm

on request

# 12.09.800

Ø15 mm 2 mm

18 mm

M6

5 mm

Ø9 mm

13 mm

# 12.09.802

on request

STEEL COMBIFIX HEAD # D-564 M6 W/CLOSED HEX HOLE A E B G

C D F

62

Material Finish

Steel Brass Plated (BPL) or Nickel Plated (NPL)

Type

Dome head with 5 mm closed hex hole

A

B

C

D

E

F

G

NPL

BPL

Ø15 mm

2,5 mm

12 mm

M6

5 mm

Ø9 mm

7 mm

# 12.09.829

on request

Ø15 mm

2,5 mm

15 mm

M6

5 mm

Ø9 mm

10 mm

on request

# 12.09.864

STEEL COMBIFIX HEADS - high quality furniture fittings

STEEL COMBIFIX HEAD # D-597 M6 W/CLOSED HEX HOLE Material Finish

Steel Brass Plated (BPL) or Black oxidized (BLK) (other finishes on request)

Type

Dome head with 5 mm closed hex hole

A E B G

C D

A

B

Ø20 mm 3 mm

F

C

D

E

F

G

BPL

BLK

18 mm

M6

5 mm

Ø9 mm

12 mm

# 12.09.937

# 12.09.935

STEEL COMBIFIX HEAD # D-637 M6 W/CLOSED HEX HOLE Material Steel Finish Yellow Zinc Plated 2-3 micron (YZP)

(other finishes on request) Type A

A E B

B

C

Ø15 mm 4 mm 8 mm

G

C

Dome head with 5 mm Closed hex hole D

E

F

G

YZP

M6

5 mm

Ø8 mm

5 mm

# 12.09.815

D F

STEEL COMBIFIX HEAD # D-595 M8 W/CLOSED HEX HOLE Material Finish

Steel Brass Plated (BPL), Black oxidized (BLK) Bronze Plated (BRZ) or Nickel Plated (NPL)

Type

Dome head with 5 mm closed hex hole

A

B

C

D

E

Ø20 mm

3 mm

16 mm

M8

5 mm

Ø20 mm

3 mm

16 mm

M8

5 mm

F

A E B

G

Ø10 mm 12 mm

Ø10 mm 12 mm

BPL

BLK

# 12.09.930

# 12.09.932

NPL

BRZ

# 12.09.933

# 12.09.934

G

C D F

STEEL COMBIFIX HEAD # D-602 M10 W/CLOSED HEX HOLE Material Finish

Steel Nickel Plated (NPL) (other finishes on request)

Type

Dome head with 5 mm closed hex hole

A

B

Ø20 mm 4 mm

C

D

E

13 mm

M10

5 mm

A E B

F

G

C

G

NPL

Ø13 mm 9 mm # 12.09.950

D F

63

BUSHINGS - high quality furniture fittings

KNOCK IN BUSHING »A«

C B

Material

Zamak, Yellow Zinc Plated (YZP)

Type

Knock in. No collar

A

A

B

C

Finish

Item No.

M4

10 mm

Ø5 mm

YZP

# 12.09.990

KNOCK IN BUSHING »BI«

C

H B

Material

Zamak, Yellow Zinc Plated (YZP)

Type

Knock in. With countersunk collar

A

B

M8

A

C

20 mm Ø10 mm

H = Head

Finish

Item No.

Ø19 x 3 mm

YZP

# 12.10.000

SCREW IN BUSHING »BL«

C B

Material

Steel, Yellow Zinc Plated (YZP)

Type

Screw in by use of insert tool # 12.10.315.

Closed end & no collar

A

A

B

C

Finish

Item No.

M8

30 mm

Ø11,5 mm

YZP

# 12.10.179

M8

39 mm

Ø11,5 mm

YZP

# 12.10.180

SCREW IN BUSHING »BL SK« C B X A 64

Material

Steel, Yellow Zinc Plated (YZP)

Type

Screw in by use of hex key. Closed end & no collar

A

B

C

X = Hex

Finish

Item No.

M8

30 mm

Ø11,5 mm

8 mm

YZP

# 12.10.176

M8

39 MM

Ø11,5 mm

8 mm

YZP

# 12.10.177

BUSHINGS

- high quality furniture fittings

SCREW IN BUSHING »C« Material

Brass, Natural or Steel, Yellow Zinc Plated (YZP) or Bright Zinc Plated (BZP)

Type

Screw in with slot. No collar

A

B

C

Brass

A

B

C

YZP

M4

8,0 mm

Ø4,75 mm

# 12.10.002

M6

10 mm

Ø8 mm

# 12.10.075

M6

14,5 mm

Ø8 mm

# 12.10.106

M6

12 mm

Ø8 mm

# 12.10.095

A

B

C

BZP

M6

14,5 mm

Ø8 mm

# 12.10.105

M4

10 mm

Ø6 mm

# 12.10.008

M6

24 mm

Ø9 mm

# 12.10.109

M8

15 mm

Ø10 mm

# 12.10.151

M8

20 mm

Ø10 mm

# 12.10.175

C B

A

SCREW IN BUSHING »CV« Material

Steel, Yellow Zinc Plated (YZP)

Type

Screw in by use of hex key. No collar

A

B

C

YZP

M6

12 mm

Ø8 mm

# 12.10.096

M6

15 mm

Ø8 mm

# 12.10.097

C B A

SCREW IN BUSHING »D« Material

Type

Zamak,Yellow Zinc Plated (YZP) Screw in by use of hex key. With collar

A

B

C

H = Head

Finish

X = Hex

Item No

M4

10 mm

Ø5,5 mm

Ø8,5 mm

YZP

4 x 3,5 mm

# 12.10.185

M5

10 mm

Ø7 mm

Ø11 mm

YZP

5 x 3,5 mm

# 12.10.186

M6

10 mm

Ø8 mm

Ø12 mm

YZP

6 x 3,5 mm

# 12.10.188

M6

13 mm

Ø8 mm

Ø12 mm

YZP

6 x 3,5 mm

# 12.10.191

M6

16 mm

Ø8 mm

Ø12 mm

YZP

6 x 3,5 mm

# 12.10.195

M6

20 mm

Ø8 mm

Ø12 mm

YZP

6 x 3,5 mm

# 12.10.211

M8

13 mm

Ø10 mm

Ø14,5 mm

YZP

8 x 4,5 mm

# 12.10.215

M8

20 mm

Ø10 mm

Ø14,5 mm

YZP

8 x 5,5 mm

# 12.10.217

M10

25 mm

Ø12 mm

Ø16 mm

YZP

10 x 7,0 mm

# 12.10.219

H B A C X

LOW PROFILE SCREW IN BUSHING The only insert on the market especially designed with a very low profile for application in thin material such as veneer and plywood.

Thread size

M6x1

d1

16 mm

d2

15,1 mm

d3

10,2 mm

Item No. M6 X 6/7 mm Yellow Zinc Plated # 12.10.500

L

7 mm

Pilot hole size

Ø12,7-13,1 mm

d1

d3 d2 L

Thread stop.

Low profile

65

BUSHINGS

- high quality furniture fittings

KNOCK IN BUSHING »DR«

C

H B

Material

Steel,Yellow Zinc Plated (YZP) or Bright Zinc Plated (BZP)

Type

Knock in. With collar

A

B

C

H = Head

YZP

BZP

M6

14 mm

Ø8,3 mm

Ø14 x 1,5 mm

# 12.10.710

# 12.10.711

M8

16 mm

Ø10,5 mm

Ø19 x 2,5 mm

# 12.10.721

# 12.10.720

M10

17 mm

Ø12,5 mm

Ø22 x 2,5 mm

# 12.10.730

# 12.10.731

A KNOCK IN BUSHING »DRN« C

H B

Material

Steel, Yellow Zinc Plated (YZP) or Bright Zinc Plated (BZP)

Type

Knock in. With collar

A

B

C

H = Head

YZP

BZP

M6

14 mm

Ø8,5 mm

Ø15 x 2 mm

# 12.10.712

# 12.10.713

M8

16 mm

Ø11 mm

Ø19 x 2,25 mm

# 12.10.723

# 12.10.722

A SCREW IN BUSHING »E«

B X

A C

Material

Zamak,Yellow Zinc Plated (YZP)

Type

Screw in by use of hex key. No collar

A

B

C

X = Hex

Item N0.

M6

13 mm

Ø7,5 mm

6 x 4,5 mm

# 12.10.222

M6

20 mm

Ø7,5 mm

6 x 5,7 mm

# 12.10.223

M8

13 mm

Ø10,5 mm

8 x 5,0 mm

# 12.10.225

M8

20 mm

Ø10,5 mm

8 x 5,5 mm

# 12.10.226

M8

25 mm

Ø10,5 mm

8 x 5,5 mm

# 12.10.227

SCREW IN BUSHING »M«

H C B

X

A

66

Material

Steel, Bright Zinc Plated (BZP)

Type

Screw in by use of hex key. With countersunk collar

A

B

C

X = Hex

H = Head

Item No.

M6

12 mm

Ø8 mm

6 X 2 mm

Ø9,8 mm

# 12.10.258

M6

12 mm

Ø8 mm

6 X 3 mm

Ø12 mm

# 12.10.259

M6

15 mm

Ø8 mm

6 X 3 mm

Ø12 mm

# 12.10.260

M6

20 mm

Ø8 mm

6 X 3 mm

Ø12 mm

# 12.10.265

M8

15 mm

Ø10 mm

8 X 3 mm

Ø14 mm

# 12.10.270

M8

20 mm

Ø10 mm

8 X 3 mm

Ø14 mm

# 12.10.290

M8

24 mm

Ø10 mm

8 X 3 mm

Ø14 mm

# 12.10.292

M10

20 mm

Ø13 mm

10 X 3 mm

Ø17 mm

# 12.10.293

BUSHINGS

- high quality furniture fittings

SCREW IN BUSHING »MZ« Material

Zamak, Bright Zinc Plated (BZP)

Type

Screw in by use of hex key. With countersunk collar

H

A

B

C

X = Hex

H = Head

Item No.

M6

13 mm

Ø8 mm

6 x 3,5 mm

Ø 12 mm

# 12.10.257

M8

15 mm

Ø10 mm

8 x 3,5 mm

Ø 14 mm

# 12.10.271

C B

X

A SCREW IN BUSHING »SK« Material

Steel, Yellow Zinc Plated (YZP) or Zamak (YZP)

Type

Screw in by use of hex key. No collar

A

B

C

X = Hex

YZP

Material

M6

13,5 mm

Ø8,25 mm

6 x 3 mm

# 12.10.460

Steel

M6

15 mm

Ø8,5 mm

6 x 4,5 mm

# 12.10.461

Zamak

C B

X

A »T-NUT« Material Steel, Bright Zinc Plated (BZP) or Plain

ST = Steel Thickness Type Knock in, 4 Prongs A

B

C

ST

Item No.

Finish

M4

5 mm

Ø6,5 mm

0,8 mm

# 12.11.001

BZP

M5

8 mm

Ø6,5 mm

0,8 mm

# 12.11.006

BZP

M6

8 mm

Ø7,5 mm

1,2 mm

# 12.11.011

BZP

M6

11 mm

Ø7,5 mm

1,2 mm

# 12.11.014

BZP

M6

15 mm

Ø7,5 mm

1,2 mm

# 12.11.017

BZP

M8

10 mm

Ø9,5 mm

1,2 mm

# 12.11.019

BZP

M8

15 mm

Ø9,5 mm

1,5 mm

# 12.11.021

Plain

M10

11 mm

Ø9,5 mm

1,5 mm

# 12.11.024

BZP

M10

16 mm

Ø11,75 mm

1,6 mm

# 12.11.027

BZP

C

ST B

A

TOOL FOR INSERTING SCREW IN BUSHING Material

Steel

Type

Tool for inserting screw in bushing

Thread

Item No.

M6

# 12.10.305

M8

# 12.10.315

M10

# 12.10.320

67

BUSHINGS

- high quality furniture fittings

KNOCK IN BUSHINGS »EXPANSION« Material

Brass, Natural

Type

Knock in. Without plastic ball or with ball for extra expansion

A

B

C

M4 7,5 mm 5,5 mm

C B

Type

Item No.

No ball

# 12.10.335

M4

10 mm

5,5 mm

No ball

# 12.10.330

M6

11,5 mm

8 mm

No ball

# 12.10.340

M6

11,5 mm

8 mm

With ball

# 12.10.345

Pulling power: 100 Kg.

A

NYLON KNOCK IN BUSHING »N«

C B A

Material

White nylon

Type

Knock in. No collar. Closed end.

A

B

C

Colour

Item No.

M4

10 mm

Ø8 mm

White

# 12.11.315

M6

10 mm

Ø8 mm

White

# 12.11.410

M6

11 mm

Ø10 mm

White

# 12.11.420

M6

13 mm

Ø10 mm

White

# 12.11.440

M6

20 mm

Ø10 mm

White

# 12.11.465

NYLON EXPANSION BUSHING »STRIPS« Material

White nylon

Type

Knock in. With knurled collar. In strips of 24 pcs.

C B

A

B

C

Colour

Item No.

M6

13 mm

Ø10 mm

White

# 12.11.450

A

SELF-WINDING EXPANSION NYLON BUSHING C B A 68

Material

White nylon

Type

Knock in. In strips of 30 pcs.

A

B

C

Colour

Item No.

Ø 3 mm

11,5 mm

Ø5,5 mm

White

# 12.11.351

"INVISIO" - KD SYSTEM

- high quality furniture fittings

The patented "INVISIO" fastening System may be used in many different applications, such as cabinets, chairs and store fixtures The system was developed to accomplish three specific objectives: • To join panels securely together in such a manner that dimensional changes in the material or structure would not rupture or loosen the joints • To achieve this objective with a fast and simple method of assembly, preferably without the need for tools • To end up with a joint in which the fasteners are totally concealed

Turkey & , U E , a nad n US, Ca

China

i Patented

The "INIVISIO" Fastening system meets these objectives by utilizing a spring steel declining ramp "Clip" and a large collared "Shoulder Screw" as the two mating members. Spring steel makes the joints strong, yet flexible, while the collar on the Shoulder Screw adds tremendous resistance to torsional pull-out. Assembly occurs by simply sliding the Shoulder Screw head down the Clip’s ramp.

With the Clip located in its pocket, and the system assembled, no fasteners are visible!

69

SINGLE CLIPS F/”INVISIO” KD-SYSTEM

- high quality furniture fittings

SINGLE CLIPS – NON-LOCKING Friction prevents the joint from disengaging.

Material Spring steel - black Model No.

Panel thickness

Pocket width A

Item No.

4032

16 mm

11 mm

# 11.16.075

5032

19 mm

13,3 mm

# 11.16.135

SINGLE CLIPS – SEMI-LOCKING Friction and a narrowing runway prevent the joint from disengaging.

Requires more force to disengage than Non-locking clips.

Material Spring steel - black Model No.

Panel thickness

Pocket width A

Item No.

4035

16 mm

11 mm

# 11.16.085

5032A

19 mm

13,3 mm

# 11.16.140

SINGLE CLIPS – LOCKING A locking tab prevents the joint from disengaging. Locking tab must be turned with a flat balde screw driver for disengagement.

Material Spring steel - black Model No.

Panel thickness

Pocket width A

Item No.

4034

16 mm

11 mm

# 11.16.080

5031

19 mm

13,3 mm

# 11.16.130

SINGLE CLIPS – PASS-THRU Used in grooved edge with another clip as an alternative to pockets with windows.

Material Spring steel - black Model No.

Panel thickness

Pocket width A

Item No.

4031

16 mm

11 mm

# 11.16.074

5030

19 mm

13,3 mm

On request

21,1

10,9

70

32

42,5

15,9

A 11,1

SINGLE “LOW POCKET DEPTH” CLIPS F/”INVISIO” KD-SYSTEM

- high quality furniture fittings

SINGLE “LOW POCKET DEPTH” CLIPS NON-LOCKING Friction prevents the joint from disengaging.

Material Spring steel - black Model No.

Panel thickness

Pocket width A

Item No.

4060

16 mm

11 mm

# 11.16.095

4061

19 mm

13,3 mm

# 11.16.100

SINGLE “LOW POCKET DEPTH” CLIPS SEMI-LOCKING Friction and a narrowing runway prevent the joint from disengaging.

Requires more force to disengage than Non-locking clips.

Material Spring steel - black Model No. Panel thickness Pocket width A Item No. 4062

16 mm

11 mm

# 11.16.105

4063A

19 mm

13,3 mm

# 11.16.110

33,4

49,2

61,9

15,9

22,2

A 8,3

Shoulder screw

Clip

Panel face

71

DOUBLE CLIPS F/”INVISIO” KD-SYSTEM

- high quality furniture fittings

DOUBLE CLIPS – NON-LOCKING Friction prevents the joint from disengaging.

Material Spring steel - black Model No.

Panel thickness

Pocket width A

Item No.

4036

16 mm

11 mm

# 11.16.255

5033

19 mm

13,3 mm

# 11.16.145

DOUBLE CLIPS – SEMI-LOCKING/NON-LOCKING Friction and a narrowing runway prevent the joint from disengaging.

Requires more force to disengage than Non-locking clips.

1 hole with semi-locking and 1 without locking Material Spring steel - black Model No.

Panel thickness

Pocket width A

Item No.

4037

16 mm

11 mm

# 11.16.260

5035

19 mm

13,3 mm

# 11.16.155

DOUBLE CLIPS – LOCKING/NON-LOCKING A locking tab prevents the joint from disengaging. Locking tab must be turned with a flat balde screw driver for disengagement.

1 hole with locking and 1 non locking Material Spring steel - black Model No.

Panel thickness

Pocket width A

Item No.

4038

16 mm

11 mm

# 11.16.265

5034

19 mm

13,3 mm

# 11.16.150

DOUBLE CLIPS – PASS-THRU/NON-LOCKING Used in grooved edge with another clip as an alternative to pockets with windows. 1 hole pass-thru and 1 non locking Material Spring steel - black Model No.

Panel thickness

Pocket width A

Item No.

4039

16 mm

11 mm

# 11.16.263

5039

19 mm

13,3 mm

# 11.16.158

21,1

32

53,1

42,5 32

42,9

A

32 10,9

72

11,1

SHOULDER SCREWS F/”INVISIO” SINGLE & DOUBLE CLIPS

- high quality furniture fittings

BLUNT STEEL SCREWS Size

Model

Item No.

ø 5 x 10 mm

2053

# 11.16.040

ø 5 x 12,7 mm

2055

# 11.16.045

Lenght

F/Ø 5 mm pre-drilled holeswith windows.

POINTED STEEL SCREWS Size

Model

Item No.

ø 4 x 11 mm

5067

# 11.16.235

ø 4 x 13 mm

1065

# 11.16.250

ø 4 x 16 mm

1165

# 11.16.030

ø 4 x 22 mm

5070

# 11.16.245

ø 4 x 32 mm

5068

# 11.16.225

ø 4 x 29 mm

5069

# 11.16.230

ø 5 x 16 mm

2155

# 11.16.070

ø 5 x 22 mm

6069

# 11.16.310

Lenght

F/Ø 4 & 5 mm pre-drilled holes.

73

- high quality furniture fittings

”INVISIO” ANTI ROTATING CLIPS

The 32 mm anti rotating clips are designed to go into a rail with open pocket as narrow as 13 mm using the 2000 clip series and 19 mm using the 5000 clip series. It provides a tight concealed joint over a wide range of pocket depths.

It may be used in many different applications such as cabinets, chairs, tables & store fixtures.

The clip system is available in 2 versions. Non-locking and Locking.

ANTI ROTATING CLIPS – NON-LOCKING Friction prevents the joint from disengaging.

Material Spring steel - black Model No.

Panel thickness

Pocket width A

Pocket width B

Item No.

2075 - male

16 mm

12,7 mm

14 mm

# 11.16.050

2076 - female

16 mm

12,7 mm

14 mm

# 11.16.051

5075 - male

19 mm

13,3 mm

12,1 mm

# 11.16.400

5076 - female

19 mm

13,3 mm

12,1 mm

# 11.16.401

ANTI ROTATING CLIPS – LOCKING A locking tab prevents the joint from disengaging. Locking tab must be turned with a flat balde screw driver for disengagement.

Material Spring steel - black Model No.

Panel thickness

Pocket width A

Pocket width B

Item No.

5073 - male

19 mm

13,3 mm

12,1 mm

# 11.16.390

5074 - female

19 mm

13,3 mm

12,1 mm

# 11.16.391

42,5 A B

32

ø5,5

Open pocket

74

Closed pocket

COMPRESSION DOWELS

- high quality furniture fittings

Compression dowels are just right for fastening decorative trim pieces like partition top caps, chair arms, toe kicks etc. Used with wood dowels, the compression dowels function as an internal clamp until the glue sets.

Surface mount dowels feature a closed end that can be screwed down with a #10 pan headed screw.

This allows the dowel to stay fastened to the proper member during disassembly.

COMPRESSION DOWELS Material

Spring steel - black

Size

Model

Item No.

ø 6,4 x 28 mm

5052A

# 11.16.170

ø 8 x 35 mm

5053A

# 11.16.176

ø 11 x 31,8 mm

5055

# 11.16.180

Ø8

Ø11

Ø6,4 35

28

Drill hole Ø6 mm

31,8

Drill hole Ø8 mm

Drill hole Ø10 mm

QUICK DOWEL CABINET CONNECTOR QUICK DOWEL CABINET CONNECTOR Material Steel, bright zinc plated & black plastic Consists of 2 parts Dowel w/wood thread & knock-in plastic bushing Size Dowel ø 8 x 39,5 mm, ø 5 mm wood thread Bushing ø 8 x 30 mm Item No. Dowel Bushing

# 11.16.530 # 11.16.531 Plastic dowel for drill hole Ø8 mm

30

39,5

11

Ø8 For hole Ø5

75

Item No.: 99.00.004 09.10.2019

- high quality furniture fittings

SISO A/S Mileparken 11 Phone: (+45) 45 830 900 DK - 2740 Skovlunde (Copenhagen) Fax: (+45) 45 830 444 Denmark E-mail: siso@siso.dk Web: www.siso.dk