Keep the fire safety of your home in check Organized examinations or a formal evaluation exercises performed to check either quality of products or the quality of services offered is known as inspection. The highest rate of inspections performed is in the field of engineering where various measurements test and gauges are critically inspected. The results of the inspections performed are usually matched with pre-set standards and/or requirements set beforehand. These inspections are usually non-destructive. Inspections in regards of fires and fire fighting equipment are done so that in case of fire emergencies, the equipment never fail and cause physical damages due to uncontrolled outbreak of fire. As per public safety law, fire extinguishers are to be inspected every month and serviced at least once a year. There are a few tips which you can follow if you are looking to pass annual inspection NSW which are – • Trees should always be trimmed away from electrical wires • Never stack fire wood next to house • Make sure the fire pit in your home is at safe distance and is covered with a metal screen covering • Install and test smoke detector alarms in every room and floor of the house • Always have a ABC fire extinguisher ready in the garage and kitchen • In case of fire, always chalk out an escape plan • Never overload electrical outlets • Never run power cords under rugs and/or carpets • Disengage electrical appliances after usage • Teach all your family members how to dial emergency numbers in case of a fire outbreak. If you want the best Annual Inspections NSW, then get in touch with Greyton Passive Fire Protection Agency. They will give you the best and through inspection you need and you can contact them at (02) 9807-9492.