JVA Pet Kit Installaon

Installing the Energizer

The energizer can be powered by mains, baery or baery with solar charging. Wiring can be all-live or alternate live earth.

Installaon Steps

1. Mount the energizer on a wall or support post.

2. Knock the galvanized earth stake into the ground close to the energizer This stake is key to good earthing and an effecve fence.

3. Using a piece of insulated wire, connect the green terminal of the energizer to the earth stake.

4. Similarly, connect the red terminal of the energizer to the fence line.

5. Switch on the energizer

If the fence is not operang:

Fault Finding

1. Check that the energizer is working – It should be cking.

2. If it is not cking, check the power source – Is there load shedding? Is the baery flat?

3. Check that the earth stake is sll intact and not corroded or rusted off.

4. Walk the fence line and check for broken strands, strands touching the earth or being touched by excessive vegetaon, or any bits of metal or other conductors which could 'leak' the power

JVA Corner

Strain Insulator

H119

This robust, unique, versatile, easy-to-install, multi-faceted strainer/corner insulator can be nailed or stapled to a wooden strainer post or pop-riveted onto a metal strainer post.