9 Specifications

Specifications

9.1 Z25 SPECIFICATION

Specification Name Energiser Output Voltage Peak Output Energy Pulse Rate 12Vdc Power Consumption

AC Power Input Battery Charger Output

L1+, L2+ and Siren Outputs

Enclosure Size

Weight – packed, no battery Specification 9.5kV peak no load 2.5 Joules at 500 Ohms Locked at 0.8 Hz Energiser on – 550mA average, 700mA peak Energiser off – 28mA (40mA with keypad) Not including keypad or auxiliary power 16-18Vac Float voltage 14V, 500mA, short circuit and reverse polarity protection utilising 3A slow SMD fuses. Self-resetting fuse protection, switched 12V, rated at 30W (combined) IP4x ABS plastic 300mm high, 190mm wide, 115mm deep 1.9kg

There are no user-serviceable parts in this unit. The installer is reminded that high voltages are retained for a while after switching off, and to wait for at least 10 minutes before opening the case.

Before working on the high voltage wiring of an electric fence, it is recommended that the energiser be turned off and an intentional short circuit be placed from the fence live wires to earth.

Electric fences are not toys; do not let children play with them. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.