ci cyl orifice

Page 1

Chapter:

Engineering data sheet

Discharge valve

Page: 1 of 2

Sheet No.: 305733

Ci Cylinder Orifice Item numbers covered by this datasheet 305733 Ci Cyl Orifice

General The Ci Cylinder orifice is used to limit the orifice of a single cylinder in a system. This version is intended for use in systems with Ci IV8 valve(s). Typical use could be when an extended discharge is desired.

Specifications Dimensions: Weight: Orifice: Work Pressure: Proof Pressure: Temperature: Materials: Markings:

Ø13.7 x L12 0.010 kg 0-5mm 400 bar >1440 bar -60 to +100°C Brass, elastomer o-ring. None

Approximate discharge times for different cylinder sizes and filling pressures Table of discharge times for discharge of 95% of total cylinder Inergen™ mass: Cylinder size and filling 30-200 50-200 80-200 30-300 50-300 80-300

0.9 15 min 27 min 44 min

1.0 13 min 23 min 37 min

15 min 26 min 43 min

13 min 22 min 36 min

Cylinder orifice diameter [mm] 1.5 2.0 7 min 4 min 11 min 7 min 18 min 10 min 6 min 11 min 17 min

4 min 6 min 10 min

2.5 3 min 4 min 7 min

3.0 2 min 3 min 5 min

3 min 4 min 7 min

2 min 3 min 5 min

Installation 1. The orifice size is verified with a calibrated calibre. 2. The o-ring is lubricated. 3. The orifice is inserted into the Hand Wheel Valve (HWV) with the Ø8 “tube” protruding from the HWV, see next page (this is to ensure that it can easily be identified and possibly removed in the future). 4. The discharge valve (Ci IV8) is carefully fitted onto the HWV as usual. 5. The discharge cylinder must be marked with a permanent label with the text “ORIFICE”. 6. Do NOT mount the actuator on this discharge valve if using back pressure or PA line activation! Do not rely on actuators mounted on this valve to activate anything else than this valve! Document: 305733 Ci Cyl Orifice.docx Category: Control inert

Id:

HDN

Rev:2014.12.03

Vølundsvej 17 DK- 3400 Hillerød Tel +45 7022 2769 Fax +45 7023 2769

Text 1 2 3 4 5 6 7 8 9


Chapter:

Engineering data sheet

Discharge valve

Sheet No.: 305733

Maintenance None. Inspect after discharge and clean orifice if necessary

Exploded view

Document: 305733 Ci Cyl Orifice.docx Category: Control inert

Id:

HDN

Rev:2014.12.03

Vølundsvej 17 DK- 3400 Hillerød Tel +45 7022 2769 Fax +45 7023 2769

Pos.

Item

1

2101162

2

305733-1

Text 1 2 3 4 5 6 7 8 9

Description

Material

O-ring 10.1 x 1.6

PU

CM Cyl Orifice

Brass

Page: 2 of 2


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.