Fire Eater College
Service Technician Education id: 190030
The main objective of the Fire Eater Service Training Course is to provide service technicians with the proper skills to enable them to carry out service and maintenance in accordance with Fire Eater guidelines. The target group of the training course
Conditions and limitations
Service Technicians
The goal of the training course
The student or the student’s employer must have ordered the special tools required to be able to perform service and maintenance.
The overall objective of any Fire Eater College training course is however, for the student to gain a greater understanding of the most common guidelines when working with Fire Eater equipment.
In order to provide the best possible training environment, the Service technician training course is typically limited to 10-12 participants at a time.
The Service Technician training course A 2 day training course during which the student will gain overall knowledge of the various extinguishing agents on the market, with special focus on INERGEN®. The student will receive a thorough introduction to Fire Eater components, typically including Fire Eater’s Control Inert system (Ci-system), including stand-alone systems, selector valves and activation options. The introduction will also cover basic hardware theory within the Fire Eater product range and the rules and regulations which may have a influence on how the product should be handled.
The training is conducted in English, so participants should be reasonably competent in understanding written and spoken English.
G
raduates of Fire Eater College will take an exam in order to obtain a competency certificate with a validity of 3 years from the date of issue.
ff Service of detection systems and control panels is not included in the standard training course.
Most of the Service Technician course will be hands-on training.
Skills obtained during the training course After completing the training course, graduates should be able to service a Fire Eater INERGEN® system ccorrectly. This will typically include service and handling of cylinders in stand-alone and multi-zone systems, including correct handling and service of pressurised equipment, valves, actuators, piping, pressure relief, etc.
FEC_190030_Fire Eater College_Service UK Rev.04
ff Subjects not covered by the standard education needs to be ordered separately.
ff Using the right tools is a necessity for obtaining the competency certificate.
Fire Eater College
Service Technician Education id: 190030
Part List - 530830 Toolkit: Ci SV 2015 Pos
Item No.
Description
Part of
1
305490
IV8 sep disc
530810
302155
Tool: IV4 Resetting
2
305491
IV8 Act plug
530810
212043
Service Kit IV7 Box
3
305495
Ci Actuator Reset Tool
530810
212044
Service Kit IV4 Box
4
530506
IS8B Electric Circ Tester
530810
5
530502
Manoswitch tester
530810
6
530520
Ci Force Act test
530810
7
530525
Ci Outlet Damper
530810
8
503404
Service kit box Ci IV8
530810
9
303432
Wrench 32 mm
530810
10
303452
In-Hex Tee 2.5 mm
530810
11
303470
End cutter 160 mm
530810
12
504204
Test lamp M12
530810
13
305149
SV22 Reset tool
530820
14
305148
APTB (Test port)
530820
15
305147
APTB Co2 adapter
530820
16
305188
SV22 Switch installation
530820
17
530530
Tool: NRV 1/4 Test Flow
530820
18
530531
Tool: NRV 1/4 Test No Flow
530820
For more information about Fire Eater
19
530540
Tool: Pressure switch setter
530820
www.fire-eater.com
20
303403
Tool: Wrench kit 8-19
530840
21
303408
Wrench 8”
530840
22
303454
Tool: In-Hex Tee 4 mm
530840
23
303455
Tool: In-Hex Tee 5 mm
530840
FEC_190030_Fire Eater College_Service UK Rev.04
The following items are included in the training course but not it
The typical agenda Day 1: 09:00 - INERGEN and extinguishing agents 10:45 - Rules and regulations when working with Fire Eater systems 11:45 - Lunch 12:15 - Introduction to Fire Eaters components and system 13:30 - Hands-on and resetting of system (IV4 and IV7) 15:45 - Evaluation Day 2 09:00 - Introduction to service checklists 10:30 - Introduction to Fire Eaters Ci IV8 and SV22 Test port components 11:45 - Lunch 12:15 - Hands-on and resetting of system (Ci IV8 and SV22 Test port) 14:30 - Test and exam 15:30 - Evaluation
Contact Kristian Petersen phone: +45 4095 2769 e-mail: kp@fire-eater.com Fire Eater A/S Vølundsvej 17 | 3400 Hillerød | DK www.fire-eater.com