CHAPTER 2 MicroMax

MicroMax

1

2

3

4

5

6 Class

a) MicroMax

Age

a) Minimum Age: 7 Years old b) Maximum Age: Date of 10th birthday

Competition Eligibility

a) State Cup, Trophy (able to Compete with KA approval) b) National Series

Licence Requirements

a) A Driver must hold a Minimum C Grade Cadet 9 licence

Chassis

a) A Kart must have a Minimum wheelbase of 890mm b) A Kart must have a Maximum wheelbase of 960mm

Drivetrain

a) Engine (i) Type 1) BRP Rotax Micro Max as Homologated - including all ancillary components (ii) The engine must be manufactured by BRP Rotax and imported into Australia by IKD or RaceMax Pty Ltd. (iii) Technical specifications available at karting.net.au (iv) Maximum Number of engines permitted to be used by the Driver from the commencement of the first qualifying session at each Meeting 1) Two (2) b) Carburettor (i) In accordance with the Homologation c) Starter (i) In accordance with the Homologation d) Clutch (i) In accordance with the Homologation e) Induction Noise Silencer (i) In accordance with the Homologation f) Exhaust (i) Header Pipe 1) In accordance with the Homologation (ii) Restrictor Plate 1) In accordance with the Homologation (iii) Muffler 1) In accordance with the Homologation g) Fuel (i) No Class specific conditions h) Transmission (i) Gearbox not permitted

8

9 Competition Tyres

a) Dry - Prime (i) Mojo C2 1) Front Tyre size must be a. 4.0/10.0-5 2) Rear Tyre size must be a. 5.0/11.0-5 b) Wet (i) Mojo CW 1) Front Tyre size must be a. 10 x 3.60-5 2) Rear Tyres size must be a. 11 x 4.50-5 c) From the commencement of the first qualifying session at a Meeting, only the following Tyres are permitted to be used during a Meeting unless otherwise advised in Supplementary Regulations: (i) one (1) set of Dry Tyres (plus one (1) replacement Dry Tyre if permitted in accordance with the Rules); and (ii) one (1) set of Wet Weather Tyres (plus one (1) replacement Wet Weather Tyre if approved in accordance with the Rules).

Social Karting Tyres

a) Dry (i) Vega - VAH (ii) Bridgestone - DR1 YJL, DR10 YLR ROK, YDS (iii) Dunlop - DFM, DFH, SL1A, RS1 (iv) MG - HZ Option (Red/White), AZ-Red, FZ Prime (Yellow) (v) Mojo - D2, D3, D4, D5 b) Wet (i) Vega - W2 (ii) Bridgestone - WER YLP (iii) Dunlop - KT14W13, KT12SLW2 (iv) MG - WT (White) (v) Mojo - W2, W3

General

a) Minimum Weight including the Driver (i) 110kg b) Data Logging (i) No Class specific conditions. c) Apparel (i) Refer to Technical Rules – Apparel. (ii) Rib protectors are mandatory for all Drivers. (iii) Neck bRaces and chest protectors are recommended for all Drivers. d) Competition Numbers (i) Background: White (ii) Numbers: Red e) Video Camera (i) Must have a fully functioning digital video camera (including recording medium) fitted in accordance with the Technical Rules, at all times while on the Track. f) Permitted Modifications (i) In accordance with the Homologation.

Cadet 12

1

2

3

4

5

6 Class

a) Cadet 12

Age

a) Minimum Age: Year of 9th birthday b) Maximum Age: Date of 13th birthday

Competition Eligibility

a) Club b) Zonal c) State Championship, Series, Cup, Trophy d) National Championship, Cup

Licence Requirements

a) State Championship, State Series and Cup, Zonal and Club Competition: Driver must hold the relevant Cadet 12 licence b) National Championship: Driver must hold a Minimum C Grade Cadet 12 licence

Chassis

a) A Kart must have a Minimum wheelbase of 880mm

Drivetrain

a) Engine (i) Type 1) Vortex Mini Rok (unrestricted) as Homologated - including all ancillary components a. The engine must be manufactured by Vortex and imported into Australia by Patrizicorse. 2) Yamaha KT100J Zonal and Club level events and All Speedway events - indefinitely) (ii) All technical specifications available at www.karting.net.au (iii) Maximum Number of engines permitted to be used by the Driver from the commencement of the first qualifying session at each Meeting 1) Two (2) b) Carburettor (i) Vortex Mini Rok 1) In accordance with the Homologation– Del’Orto PHBG ø 18mm (ii) Yamaha KT100J 1) Walbro WB Series in accordance with Technical Rules Chapter 1 Rule 9 l)(vii) c) Starter (i) In accordance with the Engine Homologation otherwise, no class specific conditions. d) Clutch (i) Vortex Mini Rok 1) In accordance with the Homologation