CHAPTER 10 X30

X30

1

2

3

4

5

6 Class

a) X30

Age

a) Restricted by Licence

Competition Eligibility

a) Club b) Zonal c) State Championship, Series, Cup, Trophy d) National Championship, Cup, Trophy

Licence Requirements

a) A Driver must hold a Minimum B Grade Senior licence

Chassis

a) Frame (i) Must comply with the Rules (ii) No Class specific conditions

Drivetrain

a) Engine (i) Type 1) IAME X30 (ii) The engine must be manufactured by IAME and imported into Australia by Remo Racing Pty Ltd. (iii) Technical specifications available at karting.net.au (iv) Maximum Number of engines permitted to be used by the Driver from the commencement of the first qualifying session at each Meeting 1) Two (2) b) Carburettor (i) In accordance with the Homologation c) Induction Noise Silencer (i) Must be fitted in accordance with the Technical Rules d) Exhaust (i) Header Pipe 1) In accordance with the Homologation (ii) Restrictor Plate 1) None (iii) Muffler 1) In accordance with the Homologation e) Ignition (i) In accordance with the Homologation f) Cooling (i) In accordance with the Homologation

7

8

g) Transmission (i) Gearbox not permitted h) Starter (i) In accordance with the Homologation i) Clutch (i) In accordance with the Homologation j) Fuel (i) No Class specific conditions

Competition Tyres

a) Dry - Prime (i) MG FZ Prime (Yellow) 1) Front Tyre size must be a. 10 x 4.60-5 2) Rear Tyre size must be a. 11 x 7.10-5 b) Dry - Option (i) Only permitted to be used if specified in the relevant State Regulations or Supplementary Regulations as applicable. (ii) MG AZ-Red 1) Front Tyre size must be: a. 10 x 4.60 - 5 2) Rear Tyre size must be: a. 11 x 7.10 - 5 c) Wet (i) MG WT (White) 1) Front Tyre size must be a. 10 x 4.20-5 2) Rear Tyre size must be a. 11 x 6.00-5 d) From the commencement of the first qualifying session at a Meeting, only the following Tyres are permitted to be used during a Meeting unless otherwise advised in Supplementary Regulations: (i) one (1) set of Dry Tyres (plus one (1) replacement Dry Tyre if permitted in accordance with the Rules); and (ii) one (1) set of Wet Weather Tyres (plus one (1) replacement Wet Weather Tyre if permitted in accordance with the Rules). e) Dry Tyres must be fitted with bead retention

Social Karting Tyres

a) Dry (i) Vega - VAH (ii) Bridgestone - DR1 YJL, DR10 YLR ROK, YDS (iii) Dunlop - DFM, DFH, SL1A, RS1 (iv) MG - HZ Option (Red/White), AZ-Red, FZ Prime (Yellow) (v) Mojo - D2, D3, D4, D5

9

b) Wet (i) Vega - W2 (ii) Bridgestone - WER YLP (iii) Dunlop - KT14W13, KT12SLW2 (iv) MG - WT (White) (v) Mojo - W2, W3

General

a) Weight (i) Minimum weight including the Driver 1) X30 Light: 162kg 2) X30 Heavy: 176kg (ii) Maximum weight of a Kart excluding the Driver for the Heavy division: 101kg b) Data Logging (i) No Class specific conditions c) Apparel (i) Refer to Technical Rules - Apparel d) Competition Numbers (i) Background: Yellow (ii) Numbers: Black e) Video Camera (i) Must have a fully functioning digital video camera (including recording medium) fitted in accordance with the Technical Rules, at all times while on the Track in all National Championship and Cup Meetings. f) Permitted Modifications (i) In accordance with the Homologation